summaryrefslogtreecommitdiff
path: root/Build/source/utils/dialog/dialog-1.1-20080819/samples/copifuncs
diff options
context:
space:
mode:
authorPeter Breitenlohner <peb@mppmu.mpg.de>2010-01-21 09:49:19 +0000
committerPeter Breitenlohner <peb@mppmu.mpg.de>2010-01-21 09:49:19 +0000
commitc56717f989a201882c2faa6adc8d8e4c10613d84 (patch)
tree218dd43dce20dd0a53a1e4dd30a404692329d7d7 /Build/source/utils/dialog/dialog-1.1-20080819/samples/copifuncs
parentcec0352ea4342dd640170abf7a8209092f9dc6e3 (diff)
dialog 1.1-20100119
git-svn-id: svn://tug.org/texlive/trunk@16796 c570f23f-e606-0410-a88d-b1316a301751
Diffstat (limited to 'Build/source/utils/dialog/dialog-1.1-20080819/samples/copifuncs')
-rwxr-xr-xBuild/source/utils/dialog/dialog-1.1-20080819/samples/copifuncs/admin.funcs200
-rwxr-xr-xBuild/source/utils/dialog/dialog-1.1-20080819/samples/copifuncs/common.funcs338
-rwxr-xr-xBuild/source/utils/dialog/dialog-1.1-20080819/samples/copifuncs/copi.funcs1303
-rwxr-xr-xBuild/source/utils/dialog/dialog-1.1-20080819/samples/copifuncs/copi.ifman129
-rwxr-xr-xBuild/source/utils/dialog/dialog-1.1-20080819/samples/copifuncs/copi.ifman2137
-rwxr-xr-xBuild/source/utils/dialog/dialog-1.1-20080819/samples/copifuncs/copi.ifmcfg268
-rwxr-xr-xBuild/source/utils/dialog/dialog-1.1-20080819/samples/copifuncs/copi.ifmcfg430
-rwxr-xr-xBuild/source/utils/dialog/dialog-1.1-20080819/samples/copifuncs/copi.ifmcfg514
-rwxr-xr-xBuild/source/utils/dialog/dialog-1.1-20080819/samples/copifuncs/copi.ifpoll19
-rwxr-xr-xBuild/source/utils/dialog/dialog-1.1-20080819/samples/copifuncs/copi.ifpoll2107
-rwxr-xr-xBuild/source/utils/dialog/dialog-1.1-20080819/samples/copifuncs/copi.ifreq120
-rwxr-xr-xBuild/source/utils/dialog/dialog-1.1-20080819/samples/copifuncs/copi.ifreq268
-rwxr-xr-xBuild/source/utils/dialog/dialog-1.1-20080819/samples/copifuncs/copi.rcnews79
-rwxr-xr-xBuild/source/utils/dialog/dialog-1.1-20080819/samples/copifuncs/copi.sendifm174
-rwxr-xr-xBuild/source/utils/dialog/dialog-1.1-20080819/samples/copifuncs/copi.sendifm215
-rw-r--r--Build/source/utils/dialog/dialog-1.1-20080819/samples/copifuncs/copi.trnrc13
-rwxr-xr-xBuild/source/utils/dialog/dialog-1.1-20080819/samples/copifuncs/copi.wheel54
-rw-r--r--Build/source/utils/dialog/dialog-1.1-20080819/samples/copifuncs/ifpatch101
18 files changed, 0 insertions, 2659 deletions
diff --git a/Build/source/utils/dialog/dialog-1.1-20080819/samples/copifuncs/admin.funcs b/Build/source/utils/dialog/dialog-1.1-20080819/samples/copifuncs/admin.funcs
deleted file mode 100755
index 27800dc876f..00000000000
--- a/Build/source/utils/dialog/dialog-1.1-20080819/samples/copifuncs/admin.funcs
+++ /dev/null
@@ -1,200 +0,0 @@
-#!/bin/bash
-# $Id: admin.funcs,v 1.2 2001/01/15 22:20:11 tom Exp $
-#
-# ComeOn Point Functions! v0.9.2
-# - usate da vari altri moduli ComeOn Point...
-#
-# AUTHOR: Beppe (beppe.dem@nsm.it)
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-#
-
-# Args: source_file, domain, nldir
-install_nodelist() {
-
- NODELIST="$1"
- FOR_DOMAIN="$2"
- NODEDIR="$3"
-
- dialog --backtitle "$TITLE" --infobox "Installo la nodelist '$NODELIST' per il domain $FOR_DOMAIN, attendere prego..." 0 0
-
- cp "$NODELIST" $NODEDIR/$FOR_DOMAIN.ndl
- chown fnet.uucp $NODEDIR/$FOR_DOMAIN.ndl
-
- echo "y" | su -l fnet -c "ifindex" >/dev/null
-}
-
-# Args: source, dest
-add_alias() {
-
- SOURCE=$1
- DEST=$2
- ALIASES=/etc/aliases
- ENTRY="`grep $SOURCE: $ALIASES`"
-
- dialog --backtitle "$TITLE" --infobox "Creo un alias per redirigere le mail per $SOURCE a $DEST ..." 0 0
-
- if [ ! "$ENTRY" ]
- then
- echo "$SOURCE: $DEST" >>$ALIASES
- else
- OLDDEST="`echo $ENTRY | cut -f2 -d:`"
- mkstemp alias
- sed /"$SOURCE:"/s/"$OLDDEST"/" $DEST"/ $ALIASES >$tmp_alias
- cat $tmp_alias >$ALIASES
- rm $tmp_alias
- fi
- mkaliases >/dev/null
-}
-
-# Args: Areas_pathname, newsgroup, area_ftn, description [, expire_days]
-# Returns: 1 - innd not running
-# 2 - already existing newsgroup
-# 3 - already existing ftn_area
-create_newsgroup() {
-
- AREAS="$1"
- NEWSGROUP="$2"
- AREA="$3"
- DESCRIPTION="$4"
- EXPIRE_DAYS="$5"
-
- NEWSGROUPS=~news/newsgroups
- EXPIRECTL=~news/expire.ctl
-
- dialog --backtitle "$TITLE" --infobox "Creo il newsgroup $NEWSGROUP per contenere i messaggi dell'area $AREA..." 0 0
-
- if [ ! "`ps ax | grep ~news/etc/innd`" ]
- then
- return 1
- fi
-
- if [ "`cut $NEWSGROUPS -f1 | cut -f1 -d\ | grep -x $NEWSGROUP`" ]
- then
- return 2
- fi
-
- if [ "`cut $AREAS -f1 | cut -f1 -d\ | grep -x $AREA`" ]
- then
- return 3
- fi
-
- su -l news -c "bin/ctlinnd newgroup $NEWSGROUP" >/dev/null
- echo -e "$NEWSGROUP\t$DESCRIPTION" >> $NEWSGROUPS
- echo -e "$AREA\t$NEWSGROUP\t`echo $NEWSGROUP | cut -f1 -d.`" >> $AREAS
-
- if [ "$EXPIRE_DAYS" ]; then
- echo "$NEWSGROUP:A:2:$EXPIRE_DAYS:$EXPIRE_DAYS" >> $EXPIRECTL
- fi
-
- chown news.news $NEWSGROUPS $EXPIRECTL
- chmod 440 $EXPIRECTL
- chown fnet.uucp $AREAS
-}
-
-# Returns: 0 if ok, 1 if (innd not running), 2 if (no that newsgroup)
-# Args: Areas_pathname, newsgroup
-rmgroup() {
-
- AREAS=$1
- NEWSGR=$2
- NEWSGROUPS=~news/newsgroups
- EXPIRE=~news/expire.ctl
-
- dialog --backtitle "$TITLE" --infobox "Elimino il newsgroup $NEWSGR ed i messaggi in esso contenuti, attendere prego. Questa operazione potrebbe durare alcuni minuti." 0 0
-
- if [ ! "`ps x | grep ~news/etc/innd`" ]
- then
- return 1
- fi
-
- if [ ! "`cut -f1 $NEWSGROUPS | cut -f1 -d\ | grep -x $NEWSGR`" ]
- then
- return 2
- else
-
-# Updating newsgroups file
- if [ -f $NEWSGROUPS ]
- then
- mkstemp groups
- mv $NEWSGROUPS $NEWSGROUPS~
- grep -v $NEWSGR $NEWSGROUPS~ >$tmp_groups
- mv $tmp_groups $NEWSGROUPS
- else
- :> $NEWSGROUPS
- fi
- chown news.news $NEWSGROUPS
-
-# Updating Areas file
- if [ -f $AREAS ]
- then
- mkstemp areas
- mv $AREAS $AREAS~
- grep -v $NEWSGR $AREAS~ >$tmp_areas
- mv $tmp_areas $AREAS
- else
- :> $AREAS
- fi
- chown fnet.uucp $AREAS
-
-# Updating expire.ctl file
- if [ -f $EXPIRE ]
- then
- mkstemp expire
- mv $EXPIRE $EXPIRE~
- grep -v "$NEWSGR:" $EXPIRE~ >$tmp_expire
- mv $tmp_expire $EXPIRE
- else
- :> $EXPIRE
- fi
- chown news.news $EXPIRE
- chmod 444 $EXPIRE
-# Remove pending articles
- echo -e "\n$NEWSGR:A:0:0:0" >>$EXPIRE
- su -l news -c "bin/news.daily" >/dev/null
- mkstemp expire
- grep -v $NEWSGR $EXPIRE >$tmp_expire
- mv $tmp_expire $EXPIRE
- chown news.news $EXPIRE
- chmod 444 $EXPIRE
-
-# Updating active file
- su -l news -c "bin/ctlinnd rmgroup $NEWSGR" >/dev/null
- fi
-}
-
-# Args: newsgroups_wildmat, days_to_keep
-set_expire_time() {
-
- NEWSGROUP="$1"
- KEEPDAYS="$2"
- EXPIRE=~news/expire.ctl
-
- dialog --backtitle "$TITLE" --infobox "Imposto a $KEEPDAYS il numero di giorni di mantenimento dei messaggi del newsgroup $NEWSGROUP..." 0 0
-
- if [ ! -f $EXPIRE ]
- then
- :> $EXPIRE
-
- elif [ "`cut $EXPIRE -s -f1 -d: | grep -x $NEWSGROUP`" ]
- then
- mkstemp expire
- grep -v "$NEWSGROUP:" $EXPIRE >$tmp_expire
- mv $tmp_expire $EXPIRE
- fi
- echo -e "\n$NEWSGROUP:A:2:$KEEPDAYS:$KEEPDAYS" >>$EXPIRE
- chown news.news $EXPIRE
- chmod 444 $EXPIRE
-}
diff --git a/Build/source/utils/dialog/dialog-1.1-20080819/samples/copifuncs/common.funcs b/Build/source/utils/dialog/dialog-1.1-20080819/samples/copifuncs/common.funcs
deleted file mode 100755
index 04eca9a8400..00000000000
--- a/Build/source/utils/dialog/dialog-1.1-20080819/samples/copifuncs/common.funcs
+++ /dev/null
@@ -1,338 +0,0 @@
-#
-# ComeOn Point Functions! v0.9.2
-# - usate da vari altri moduli ComeOn Point...
-#
-# AUTHOR: Beppe (beppe.dem@nsm.it)
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-#
-
-save() {
- if [ -f $1 ]
- then
- mv $1 $1~
- fi
-}
-
-# Returns $PKG_TO_REMOVE
-find_incompatible_packages() {
- dialog --backtitle "$TITLE" --infobox "Vediamo innanzitutto se c'e' qualche pacchetto di troppo ... ;-)" 0 0
-
- PKG_TO_REMOVE=""
- for i in sendmail smailcfg cnews
- do
- if [ -f /var/adm/packages/$i ]
- then
- PKG_TO_REMOVE="$PKG_TO_REMOVE $i"
- fi
- done
-}
-
-# Returns $PKG_TO_INSTALL
-find_necessary_packages() {
- dialog --backtitle "$TITLE" --infobox "Controlliamo se manca qualche pacchetto..." 0 0
-
- PKG_TO_INSTALL=""
- for i in tcpip mailx inn
- do
- if [ ! -f /var/adm/packages/$i ]
- then
- PKG_TO_INSTALL="$PKG_TO_INSTALL $i"
- fi
- done
-}
-
-# Args: user, editor
-configure_trn() {
- dialog --backtitle "$TITLE" --infobox "Configuro trn all'user $1..." 0 0
-
- SHELL_USED="`basename \`cut /etc/passwd -f1,7 -d: | grep $1: | cut -f2 -d:\``"
- USER_HOME="`cut /etc/passwd -f1,6 -d: | grep $1: | cut -f2 -d:`"
- TRNRC="$USER_HOME/.trnrc"
-
- case $SHELL_USED in
- bash)
- if [ -f $USER_HOME/.bash_profile ]
- then
- PROF=$USER_HOME/.bash_profile
- else
- PROF=$USER_HOME/.profile
- fi;;
- zsh)
- PROF=$USER_HOME/.zprofile;;
- *)
- PROF=$USER_HOME/.profile;;
- esac
-
- if [ ! -f $PROF ]
- then
- :>$PROF
- chown $1.mail $PROF
- elif [ ! "`grep -x \". ~/.trnrc\" $PROF`" ]
- then
- echo -e "\n. ~/.trnrc" >>$PROF
- fi
-
- save $TRNRC
-
- echo "EDITOR=\"$2\"" > $TRNRC
- cat copi.trnrc >> $TRNRC
- chown $1.mail $TRNRC
-}
-
-# Args: user, editor
-configure_elm() {
- USER=$1
- EDIT=$2
-
- dialog --backtitle "$TITLE" --infobox "Configuro elm all'user $USER..." 0 0
-
- USER_HOME="`cut /etc/passwd -f1,6 -d: | grep $USER: | cut -f2 -d:`"
- DIRRC="$USER_HOME/.elm"
- ELMRC="$DIRRC/elmrc"
-
- mkdir -p $DIRRC -m 700
- chown $USER.mail $USERHOME $DIRRC
-
- save $ELMRC
-
- cat <<EOF >$ELMRC
-#
-# .elm/elmrc - options file for the ELM mail system
-#
-# Generated by $PKTNAME for $USER
-#
-
-# For yes/no settings with ?, ON means yes, OFF means no
-
-# how to sort the alias list, "Name" by default
-### aliassortby = Name
-
-# name of editor to use for replies that have text
-alteditor = $EDIT
-
-# alternative addresses that I could receive mail from (usually a
-# forwarding mailbox) and don't want to have listed...
-### alternatives =
-
-# should the default be to delete messages we've marked for deletion?
-alwaysdelete = ON
-
-# should the default be to keep unread messages in the incoming mailbox?
-alwayskeep = ON
-
-# should the default be to store read messages to the "received" folder?
-alwaysstore = OFF
-
-# should we use the "->" rather than the inverse video bar?
-arrow = OFF
-
-# should the message disposition questions be displayed(ON) or
-# auto-answered(OFF) with the default answers when we resync or
-# change folders?
-ask = OFF
-
-# would you like to be asked for Carbon-Copies information each msg?
-askcc = OFF
-
-# attribution string for replies ('%s' is the author of original message)
-attribution = %s wrote:
-
-# automatically copy message being replied to into buffer?
-autocopy = ON
-
-# threshold for bouncing copies of remote uucp messages...
-# zero = disable function.
-### bounceback = 0
-
-# This is used to determine if the builtin pager should be used on some
-# messages even if you would usually use an external pager program.
-# There are two ways of determining whether the builtin pager should be
-# used. If you want any message that is shorter than "n" lines to use the
-# internal pager, set the parameter to "n". If you want the builtin
-# pager to be used if the message is "m" lines shorter than the number of
-# lines on your screen set the parameter to be "-m". Setting the
-# parameter to zero will result in the message always being sent through
-# your external pager.
-### builtinlines = -3
-
-# where to save calendar entries
-#calendar = /root/calendar
-
-# list of options that can be configured at the "o)ptions" screen
-configoptions = ^_cdefsopyv_am_un
-
-# Should elm always ask the user to confirm before it appends
-# messages to any existing file?
-# This is used for both folders in the user's mail directory
-# and ordinary files.
-confirmappend = OFF
-
-# Should elm always ask the user to confirm before it creates
-# any new files?
-# This is used for both folders in the user's mail directory
-# and ordinary files.
-confirmcreate = OFF
-
-# Should elm ask for confirmation before it appends a message
-# to an existing file that is not a folder in the user's Mail
-# directory?
-# This is used for ordinary files only and does not affect
-# folders in the user's mail directory.
-confirmfiles = OFF
-
-# Should elm ask for confirmation before it creates a new folder
-# in the user's Mail directory?
-# This is used only for folders in the user's mail directory and
-# does not affect ordinary files.
-confirmfolders = OFF
-
-# save a copy of all outbound messages?
-copy = ON
-
-# name of editor for ~e command (when editor="builtin")
-easyeditor = $EDIT
-
-# what editor to use ("none" means simulate Berkeley Mail)
-editor = $EDIT
-
-# the character to use in the builtin editor for entering commands
-### escape = ~
-
-# save outbound messages by login name of sender/recipient even if the
-# associated folder doesn't already exist?
-### forcename = OFF
-
-# do we want to be able to mail out AT&T Mail Forms?
-### forms = OFF
-
-# The full user name for outbound mail
-### fullname = $PKTNAME User
-
-# should we keep folders from which all messages are deleted?
-### keepempty = OFF
-
-# are we running on an HP terminal and want HOME, PREV, NEXT, etc...?
-### keypad = OFF
-
-# local ".signature" file to append to appropriate messages...
-localsignature = ~/.signature
-
-# where to save my mail to, default directory is "Mail"
-maildir = ~/Mail
-
-# should we display the three-line 'mini' menu?
-menu = ON
-
-# would you like a copy of a message you send to an alias you are on?
-### metoo = OFF
-
-# when using the page commands (+ - <NEXT> <PREV>) change the current
-# message pointer...?
-### movepage = OFF
-
-# just show the names when expanding aliases?
-names = OFF
-
-# when messages are copied into the outbound buffer, don't include headers?
-noheader = ON
-
-# program to use for displaying messages ('builtin' is recommended)
-### pager = builtin+
-
-# start up by pointing to the first new message received, if possible?
-### pointnew = ON
-
-# list of delivery precedences allowed, or empty to allow anything
-# precedence may be followed by optional ":priority" specification
-### precedences =
-
-# prefix sequence for indenting included message text in outgoing messages...
-prefix = _:>_
-
-# how to print a message ('%s' is the filename)
-### print = /bin/cat %s | /usr/bin/lpr
-
-# prompt for a command after the external pager exits?
-### promptafter = ON
-
-# Value by which message count is incremented while reading a new mailbox.
-# Setting this value to a number larger than one will speed up the time it
-# takes to read a large mailbox when using a slow terminal.
-### readmsginc = 1
-
-# where to save received messages to, default file is "=received"
-receivedmail = =received
-
-# remote ".signature" file to append to appropriate messages...
-remotesignature = ~/.signature
-
-# emulate the mailx message increment mode (only increment after
-# something has been 'done' to a message, either saved or deleted,
-# as opposed to simply each time something is touched)?
-### resolve = ON
-
-# save messages, incoming and outbound, by login name of sender/recipient?
-savename = ON
-
-# where to save copies of outgoing mail to, default file is "=sent"
-sentmail = =sent
-
-# The shell to use for shell escapes
-shell = /bin/sh
-
-# do we want dashes above signatures? (News 2.11 compatibility and convention)
-### sigdashes = ON
-
-# time in seconds which Elm will wait after displaying a transient message
-# and before erasing it. Can be 0 or positive integer.
-### sleepmsg = 2
-
-# are we running on an HP terminal and want softkeys available too?
-# (this implies "keypad=ON" too)
-### softkeys = OFF
-
-# how to sort folders, "Reverse Sent" by default
-### sortby = Reverse-Sent
-
-# Set the main prompt timeout for resynching...
-### timeout = 600
-
-# display message title when displaying pages of message?
-titles = ON
-
-# where to place temporary files, default directory is "/tmp"
-### tmpdir = /tmp/
-
-# are we good at it? 0=beginner, 1=intermediate, 2+ = expert!
-userlevel = 0
-
-# would you like to use termcap/terminfo ti/te entries?
-usetite = ON
-
-# name of editor for ~v command (when editor="builtin")
-visualeditor = $EDIT
-
-# enable the weedout list to be read?
-### weed = ON
-
-# what headers I DON'T want to see, ever.
-weedout = "*end-of-user-headers*"
-
-EOF
-
- chmod 600 $ELMRC
- chown $USER.mail $ELMRC
-}
diff --git a/Build/source/utils/dialog/dialog-1.1-20080819/samples/copifuncs/copi.funcs b/Build/source/utils/dialog/dialog-1.1-20080819/samples/copifuncs/copi.funcs
deleted file mode 100755
index 7be4bdb4151..00000000000
--- a/Build/source/utils/dialog/dialog-1.1-20080819/samples/copifuncs/copi.funcs
+++ /dev/null
@@ -1,1303 +0,0 @@
-#!/bin/bash
-# $Id: copi.funcs,v 1.3 2001/01/15 22:24:26 tom Exp $
-# ComeOn Point Functions! v0.9.2
-# - usate da vari altri moduli ComeOn Point...
-#
-# AUTHOR: Beppe (beppe.dem@nsm.it)
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-#
-
-HOST=`hostname`
-DOMAIN=`hostname -d`
-PKTNAME="ComeOn Point Installer!"
-COMEONDIR=/usr/lib/ComeOn
-
-AKASETUP=$COMEONDIR/point/.akasetup
-COPIUSER=$COMEONDIR/point/.copi.user
-EMSIFILE=$COMEONDIR/point/.emsi
-PNTSETUP=$COMEONDIR/point/.pntsetup
-
-mkstemp() {
- eval 'tmp_'$1'=`tempfile 2>/dev/null` || tmp_'$1'=/tmp/'$1'$$'
-}
-
-# Args: [start_uid]
-# Returns: $FOUND_UID
-find_unused_uid() {
-
- if [ $1 ]; then
- FOUND_UID=$1
- else
- FOUND_UID=501
- fi
-
- while [ "`cut -f3 -d: /etc/passwd | grep -x $FOUND_UID`" ]
- do
- FOUND_UID=$[$FOUND_UID+1]
- done
-}
-
-int2fido() {
- _RETVAL="`echo $1 | cut -f3 -d. | cut -c2-`:\
-`echo $1 | cut -f2 -d. | cut -c2-`/\
-`echo $1 | cut -f1 -d. | cut -c2-`"
-}
-int2fidonet() {
- _RETVAL="`echo $1 | cut -f3 -d. | cut -c2-`:\
-`echo $1 | cut -f2 -d. | cut -c2-`/\
-`echo $1 | cut -f1 -d. | cut -c2-`@\
-`echo $1 | cut -f4- -d.`"
-}
-fido2int() {
- _RETVAL="f\
-`echo $1 | cut -f2 -d '/'`.n\
-`echo $1 | cut -f1 -d '/' | cut -f2 -d:`.z\
-`echo $1 | cut -f1 -d '/' | cut -f1 -d:`"
-}
-fidonet2int() {
- _RETVAL="f\
-`echo $1 | cut -f2 -d/ | cut -f1 -d@`.n\
-`echo $1 | cut -f1 -d/ | cut -f2 -d:`.z\
-`echo $1 | cut -f1 -d/ | cut -f1 -d:`.\
-`echo $1 | cut -f2 -d@`"
-}
-fidonetpoint2int() {
- _RETVAL="p\
-`echo $1 | cut -f2 -d. | cut -f1 -d@`.f\
-`echo $1 | cut -f2 -d/ | cut -f1 -d.`.n\
-`echo $1 | cut -f2 -d: | cut -f1 -d/`.z\
-`echo $1 | cut -f1 -d/ | cut -f1 -d:`.\
-`echo $1 | cut -f2 -d@`.org"
-}
-
-# Parameters: fqdn
-configure_loopback() {
- dialog --backtitle "$TITLE" --infobox "Configuro la rete (in modo loopback)..." 0 0
-
- FQDN=$1
- HOST=`echo $FQDN | cut -f1 -d.`
- DOMAIN=`echo $FQDN | cut -f2- -d.`
-
- save /etc/hostname
- echo $FQDN >/etc/HOSTNAME
- export HOSTNAME=$FQDN
- hostname $HOST
-
- save /etc/rc.d/rc.inet1
- cat <<EOF >/etc/rc.d/rc.inet1
-#! /bin/sh
-#
-# rc.inet1 This shell script boots up the base INET system.
-
-# Attach the loopback device.
-/sbin/ifconfig lo 127.0.0.1
-/sbin/route add -net 127.0.0.0
-
-# End of rc.inet1
-EOF
- chmod 755 /etc/rc.d/rc.inet1
-
-
- save /etc/networks
- cat <<EOF >/etc/networks
-#
-# networks This file describes a number of netname-to-address
-# mappings for the TCP/IP subsystem. It is mostly
-# used at boot time, when no name servers are running.
-#
-
-loopback 127.0.0.0
-
-# End of networks.
-EOF
- chmod 644 /etc/networks
-
-
- save /etc/hosts
- cat <<EOF >/etc/hosts
-#
-# hosts This file describes a number of hostname-to-address
-# mappings for the TCP/IP subsystem. It is mostly
-# used at boot time, when no name servers are running.
-# On small systems, this file can be used instead of a
-# "named" name server. Just add the names, addresses
-# and any aliases to this file...
-#
-# By the way, Arnt Gulbrandsen <agulbra@nvg.unit.no> says that 127.0.0.1
-# should NEVER be named with the name of the machine. It causes problems
-# for some (stupid) programs, irc and reputedly talk. :^)
-#
-# But we (ComeOn Linux!) says that this is not valid for you, because
-# you resulted to have not a network at the installation time.
-
-# For loopbacking.
-127.0.0.1 localhost $FQDN $HOST
-
-# End of hosts.
-EOF
- chmod 644 /etc/hosts
-
- save /etc/resolv.conf
- echo domain $DOMAIN >/etc/resolv.conf
- chmod 644 /etc/resolv.conf
-
- save /etc/host.conf
- cat <<EOF >/etc/host.conf
-order hosts,bind
-multi on
-EOF
- chmod 644 /etc/host.conf
-
- /etc/rc.d/rc.inet1
-}
-
-# Private function, adds an user to a group. Args: user, group
-add_to_group() {
-
- if [ ! "`groups \"$1\" | grep \" $2 \"`" ]
- then
- USERS="`grep \"$2:\" /etc/group | cut -s -f4 -d:`"
-
- mkstemp group
- if [ "$USERS" ]; then
- sed "/$2:/s/:$USERS/:$USERS,$1/" /etc/group >$tmp_group
- else
- sed "/$2:/s/:/:$1/3" /etc/group >$tmp_group
- fi
-
- save /etc/group
- mv $tmp_group /etc/group
- fi
-}
-
-# Arguments: user, fullname
-add_postmaster() {
- dialog --backtitle "$TITLE" --infobox "Creo l'user principale e/o ne adatto le informazioni..." 0 0
-
- USER="$1"
- NAME="$2"
- HOMEDIR="/home/$USER"
-
-# echo "$USER" >$COPIUSER # you've to do this in any other location
- ENTRY="`cut /etc/passwd -s -f1,2,5 -d: | grep $USER:`"
- if [ "$ENTRY" ]
- then
- OLDNAME="`echo $ENTRY | cut -f3 -d:`"
- PASW="`echo $ENTRY | cut -f2 -d:`"
- if [ "$OLDNAME" != "$NAME" ]
- then
- mkstemp passwd
- sed "/$USER:$PASW:/s/:$OLDNAME:/:$NAME:/" /etc/passwd >$tmp_passwd
- save /etc/passwd
- mv $tmp_passwd /etc/passwd
- fi
-
- add_to_group "$USER" mail
- else
- if [ -f /bin/bash ]; then USERSHELL=/bin/bash; else USERSHELL=""; fi
- find_unused_uid
- echo "$USER:*:$FOUND_UID:12:$NAME:$HOMEDIR:$USERSHELL" >>/etc/passwd
- mkdir -p $HOMEDIR -m 755
- chown $USER.mail $HOMEDIR
- fi
-}
-
-comment_nntp_in_inetdconf() {
- dialog --backtitle "$TITLE" --infobox "Commento la riga 'nntp' in /etc/inetd.conf..." 0 0
-
- mkstemp inetd
- sed "/in.nntpd/s/nntp/#&/" /etc/inetd.conf >$tmp_inetd
- save /etc/inetd.conf
- mv $tmp_inetd /etc/inetd.conf
- killall -1 inetd
-}
-
-# Args: organization
-set_organization() {
- dialog --backtitle "$TITLE" --infobox "Imposto l' origin..." 0 0
-
- ORGANIZATION=/etc/organization
- save $ORGANIZATION
-
- NEW_ORGANIZATION="$1"
- echo "$NEW_ORGANIZATION" >$ORGANIZATION
-}
-
-create_innconf_newsfeeds_distrib() {
- dialog --backtitle "$TITLE" --infobox "Creo i files di configurazione principali di InterNet News (inn)..." 0 0
-
-# File: inn.conf
- INNCONF=~news/inn.conf
- save $INNCONF
-
- cat <<EOF >$INNCONF
-## $Revision: 1.3 $
-## inn.conf -- inn configuration data
-## Format:
-## <parameter>:<whitespace><value>
-## Used by various programs and libinn. The following parameters are defined:
-## domain Local domain, without leading period.
-## fromhost What to put in the From line; default is FQDN
-## of the local host.
-## moderatormailer Where to mail moderated postings, if not found
-## in the moderators file; see moderators(5).
-## pathhost What to put in the Path and Xref headers; default
-## is FQDN of the local host.
-## organization If $ORGANIZATION doesn't exist. What to put in
-## the Organization header if blank.
-## server If $NNTPSERVER doesn't exist. Local NNTP server
-## host to connect to.
-##
-
-server: $HOST.$DOMAIN
-domain: $DOMAIN
-pathhost: $HOST
-EOF
-
- chmod 444 $INNCONF
- chown news.news $INNCONF
-
-
-# File: newsfeeds
- NEWSFEEDS=~news/newsfeeds
- save $NEWSFEEDS
-
- echo -e "ME:*::\n" >$NEWSFEEDS
-
- IAKA=1
- OK=1
- while [ "$OK" != 0 ]
- do
- AKA="`cut $AKASETUP -f$IAKA -d:`"
- if [ ! "$AKA" ]
- then
- OK=0
- else
- if [ $IAKA != 1 ]
- then
- TMPAKA="`echo $AKA | cut -f-4 -d.`"
- SENDCRON="$SENDCRON $TMPAKA"
- echo -n "$TMPAKA/" >>$NEWSFEEDS
- fi
- TMPAKA="`echo $AKA | cut -f1-2 -d.`"
- if [ $IAKA = 1 ]; then
- SENDCRON="$SENDCRON $TMPAKA"
- fi
- echo -e "$TMPAKA\\" >>$NEWSFEEDS
- echo -e "\t:!*,`echo $AKA | cut -f4 -d.`.*\\" >>$NEWSFEEDS
- echo -e "\t:Tf,Wfb,B4096/1024:\n" >>$NEWSFEEDS
- fi
- IAKA=$[$IAKA+1]
- done
-
- chmod 444 $NEWSFEEDS
- chown news.news $NEWSFEEDS
-
-
-# File: distrib.pats
- DISTRIB=~news/distrib.pats
- save $DISTRIB
-
- IAKA=1
- OK=1
- while [ "$OK" != 0 ]; do
- AKA="`cut $AKASETUP -f$IAKA -d:`"
- IAKA=$[$IAKA+1]
- if [ "$AKA" = "" ]; then
- OK=0
- else
- DOM="`echo $AKA | cut -f4 -d.`"
- echo "10:$DOM.*:$DOM" >>$DISTRIB
- fi
- done
-
- chmod 444 $DISTRIB
- chown news.news $DISTRIB
-}
-
-# Args: num_of_days
-create_expirectl() {
- dialog --backtitle "$TITLE" --infobox "Imposto il periodo di transito dei messaggi..." 0 0
-
- EXPIRECTL=~news/expire.ctl
- save $EXPIRECTL
-
- EXPIRE_DAYS=$1
-
- echo -e "/remember/:14\n\n*:A:2:$EXPIRE_DAYS:$EXPIRE_DAYS" >$EXPIRECTL
-
- chmod 440 $EXPIRECTL
- chown news.news $EXPIRECTL
-}
-
-create_nnrpaccess() {
- dialog --backtitle "$TITLE" --infobox "Rendo accessibili le news in lettura..." 0 0
-
- NNRPACCESS=~news/nnrp.access
- save $NNRPACCESS
-
- cat <<EOF >$NNRPACCESS
-## $Revision: 1.3 $
-## nnrp.access - access file for on-campus NNTP sites
-## Format:
-## <host>:<perm>:<user>:<pass>:<groups>
-## Connecting host must be found in this file; the last match found is
-## used, so put defaults first.
-## <host> Wildcard name or IP address
-## <perm> R to read; P to post
-## <user> Username for authentication before posting
-## <pass> Password, for same reason
-## <groups> Newsgroup patterns that can be read or not read
-## To disable posting put a space in the <user> and <pass> fields, since
-## there is no way for client to enter one.
-##
-## Default is no access, no way to authentication, and no groups.
-# *:: -no- : -no- :!*
-## Foo, Incorporated, hosts have no password, can read anything.
-# *.foo.com:Read Post:::*
-
-*:: -no- : -no- :!*
-localhost.$DOMAIN:Read Post:::*
-$HOST.$DOMAIN:Read Post:::*
-
-EOF
-
- chmod 440 $NNRPACCESS
- chown news.news $NNRPACCESS
-}
-
-create_hostsnntp() {
- dialog --backtitle "$TITLE" --infobox "Rendo accessibili le news in scrittura..." 0 0
-
- HOSTSNNTP=~news/hosts.nntp
- save $HOSTSNNTP
-
- cat <<EOF >$HOSTSNNTP
-## $Revision: 1.3 $
-## hosts.nntp - names and addresses that feed us news
-## Format
-## <host>:
-## <host>:<password>
-## <host> can be a name or IP address; no wildcards. Any hosts not
-## listed here are handed off to nnrpd.
-
-$HOST.$DOMAIN:
-
-EOF
-
- chmod 440 $HOSTSNNTP
- chown news.news $HOSTSNNTP
-}
-
-create_dirs_and_files() {
-
- CURMASK=`umask`
- . ./copi.wheel
- pushd /var/log >/dev/null
- mkdir -p news -m 755; chown news.news news
- cd /var/log/news; mkdir -p OLD -m 755; chown news.news OLD
- cd /var/spool; mkdir -p news -m 775; chown news.news news
- cd /var/spool/news; umask 02
- mkdir -p out.going control junk in.coming
- chown news.news out.going control junk in.coming
- cd in.coming; mkdir -p bad tmp; chown news.news bad tmp; umask $CURMASK
- ln -sf ~news /usr/local/lib/
- ln -sf ~news/inews /usr/bin/
- chmod 1777 /var/tmp
-
- cd /var/spool
- mkdir -p uucppublic
- chown uucp.uucp uucppublic
- chmod 1777 uucppublic
-
- cd ~news
- touch history history.dir history.pag errlog log
- chown news.news history* log errlog
- chmod 664 history* log errlog
-
- save active
- echo "control 0000000000 0000000001 y" > active
- echo "junk 0000000000 0000000001 y" >> active
- chown news.news active
-
- save active.times
- echo "control 814573260 usenet" > active.times
- echo "junk 814573260 usenet" >> active.times
- chown news.news active.times
-
- save newsgroups
- :>newsgroups
- chown news.news newsgroups
-
- popd >/dev/null
-}
-
-install_rcnews() {
- dialog --backtitle "$TITLE" --infobox "Avvio l'InterNet News daemon (innd) e l'installo negli script di boot, attendere... attenzione che e' probabile che in questa fase non sia possibile entrare da un'altra VC come root." 0 0
-
- RCLOCAL=/etc/rc.d/rc.local
- RCNEWS=~news/etc/rc.news
- RCLINE="`grep $RCNEWS $RCLOCAL`"
-
- if [ ! "$RCLINE" -o `echo $RCLINE | cut -c1` = '#' ]
- then
- save $RCLOCAL
- echo -e "\n$RCNEWS" >>$RCLOCAL
- fi
-
- cp copi.rcnews $RCNEWS
- chmod 550 $RCNEWS
- chown news.news $RCNEWS
-
- if [ -f ~news/innd/innd.pid ]; then
- su -l news -c "bin/ctlinnd shutdown x" >/dev/null
- sleep 2 # wait for server to shutdown
- fi
-
- killall innd 2>/dev/null # make sure it's gone down
- $RCNEWS
-}
-
-install_crontab_news() {
- dialog --backtitle "$TITLE" --infobox "Imposto la crontab di news per l'automantenimento del sistema (cancellazione giornaliera dei messaggi vecchi et similia)..." 0 0
-
-
- if [ -f $COPIUSER ]; then
- POSTMST="`cat $COPIUSER`"
- else
- POSTMST="root"
- fi
-
- NEWSHOME=~news
- save /var/spool/cron/crontabs/news
- cat <<EOF | crontab - -u news
-#-------------------------------------------------------------------------------
-# /var/spool/cron/crontabs/news
-SHELL=/bin/sh
-#
-MAILTO=$POSTMST
-#
-#===============================================================================
-#
-# inn-1.4 (Inter Net News)
-#
-#===============================================================================
-#
-#-------------------------------------------------------------------------------
-# Daily housekeeping ... expires news and other things ...
-#-------------------------------------------------------------------------------
-#
-51 16 * * * $NEWSHOME/bin/news.daily < /dev/null
-#
-#-------------------------------------------------------------------------------
-# offer spooled news - that was spooled into the incoming directory when the
-# innd server wasn't available - again to the innd server.
-#-------------------------------------------------------------------------------
-#
-18 * * * * $NEWSHOME/rnews -U
-#
-#-------------------------------------------------------------------------------
-# send news batches to your fidonet(-like) news feeds
-#-------------------------------------------------------------------------------
-#
-49 16 * * * $NEWSHOME/send-ifmail$SENDCRON
-#
-#-------------------------------------------------------------------------------
-#
-EOF
-
- echo $NEWSHOME/send-ifmail$SENDCRON >/etc/point.ifsend
-}
-
-# Private func
-# Args: dir_with_sources, bindir, cfgdir, logdir, version
-copi.ifmCfg() {
-
- SRCDIR="$1"
- BINDIR="$2"
- CFGDIR="$3"
- LOGDIR="$4"
- VERSION="$5"
- SOURCE="$SRCDIR/CONFIG"
- CONFIGFILE="$CFGDIR/config"
-
- cat <<EOF >$SOURCE
-# Compile-time configuration for ifmail FidoNet mailer and gateway
-COPYRIGHT = "Eugene G. Crosser, 1993-1995"
-VERSION = "$VERSION"
-
-# Main configuration file. This default may be overwritten by -I key.
-CONFIGFILE = $CONFIGFILE
-
-# Debug messages turned on by -x key are written here.
-# Some error messages may occationally appear here too.
-# This may be changed in the 'config' file.
-DEBUGFILE = "$LOGDIR/ifdebug"
-
-# Procession log. Usually gets several lines for each invocation.
-# Also look for error diagnostics here. If HAS_SYSLOG defined,
-# only stdout and stderr from the packers and unpackers go to this
-# file, while actual logging is done via syslog() calls.
-# This may be changed in the 'config' file.
-LOGFILE = "$LOGDIR/iflog"
-
-# Use syslog() facility codes for mail gate, news gate and ifcico.
-# Define -DHAS_SYSLOG (see below)
-#MAILLOG = LOG_MAIL
-MAILLOG = LOG_LOCAL0
-#NEWSLOG = LOG_NEWS
-NEWSLOG = LOG_LOCAL0
-#CICOLOG = LOG_UUCP
-CICOLOG = LOG_LOCAL0
-
-# Directory where UUCP lock files reside.
-#LOCKDIR = "/var/lock"
-LOCKDIR = "/var/spool/uucp"
-
-# Directory from which file requests are resolved.
-# This may be changed from the 'config' file.
-#PUBDIR = "/home/ftp/pub"
-PUBDIR = "/var/spool/uucppublic"
-
-# Compile-time system-dependant options.
-
-# If you specify "-DHAS_NDBM_H", ndbm calls will be used instead
-# of dbm ones, and the feature will be activated of Cnews log processing
-# to add entries to SEEN-BY if echo message is exported to several FTN
-# nodes by Cnews mechanism. This works with INN too.
-
-# If you specify "-DHAS_STATFS" or "-DHAS_STATVFS", statfs() (or statvfs()
-# respectivly) call will be used to check available disk space. For statfs()
-# call, you must also specify which .h file to use: "-DSTATFS_IN_VFS_H" or
-# "-DSTATFS_IN_STATFS_H" or "-DSTATFS_IN_STATVFS_H" or "-DSTATFS_IN_MOUNT_H".
-# For statvfs() call, statvfs.h is included.
-
-# define -DSCO_STYLE_STATFS if your statfs() call requires 4 arguments.
-
-# If you specify "-DHAS_SETSID", setsid() call is used to detach from the
-# control terminal. Otherwise setpgrp() call is used, and in this case you
-# may specify "-DBSD_SETPGRP" to use BSD-style call. Used in ifcico only.
-
-# If you specify "-DDONT_HAVE_TM_GMTOFF", timezone offset will be calculated
-# from the difference between the results of localtime() and gmtime() calls
-# instead of using tm_gmtoff field of struct tm.
-
-# If you specify "-DDONT_HAVE_GETOPT", local definitions for getopt will
-# be used (but not the function itself)
-
-# For ifcico, you must specify -DHAS_TERMIOS_H (preffered), -DHAS_TERMIO_H
-# or -DHAS_SGTTY_H to use POSIX-y, SysV-ish of BSD-ish terminal control.
-
-# in SVR4 you should specify -DHAS_DIAL (and maybe -DHAS_DIAL_H) to use
-# dial() library function instead of regular open(). Lock files are
-# not used in this case.
-
-# for uucp lock files, you must specify either -DASCII_LOCKFILES or
-# -DBINARY_LOCKFILES
-
-# define -DHAS_FSYNC if there is a fsync() system call (to update .flo
-# files)
-
-# define -DPARANOID if you want iftoss to deny packets with wrong password.
-
-# define -DRELAXED if you want iftoss to accept packets that are not
-# addressed to your node.
-
-# define -DFORCEINTL if you want ifmail to create ^aINTL even if this is
-# not an inter-zone netmail.
-
-# define -DNEED_UUCPFROM if your MTA needs a uucp "From" line in mail.
-
-# define -DHAS_TCP if you want ifmail to be able to originate outgoing
-# connections over TCP/IP (socket library needed)
-
-# define -DHAS_TERM if you want ifmail to be able to originate outgoing
-# connections over TERM (TCP "extention", client.a needed)
-
-# define -DHAS_REGEX_H or -DHAS_LIBGEN_H if you have either of these
-# header files for regular expression handlers.
-
-# define -DHAS_SYSLOG to use syslog() instead of logging to files.
-# Files are necessary anyway, external programs' stdout and stderr
-# are redirected there.
-
-# define -DNEED_BSY if you want ifpack and ifcico to create .bsy
-# files preventing simultaneous processing of the same node.
-
-# define -DNEED_FORK if your system is uncapable of getting rid of the
-# control terminal unless you are running not as a group leader.
-
-# define -DREGEX_NEED_CARET if your re_comp/re_exec require that the
-# mask starts with a '^' to match the beginning of the string.
-
-# as of June 1994, FreeBSD has a nasty bug in the kernel lseek() code:
-# if you make lseek() to a point before the start of the file, it
-# succeeds and the writing point becomes negative. Fortunately,
-# subsequent write()s fail :-). To overwork this, define
-# -DNEGATIVE_SEEK_BUG, this will add an extra fseek() to restore
-# zero writing point where necessary.
-
-# define -DNEED_TRAP if you want debugging information when the programs
-# are aborted with segmentation fault etc. Currently tested and works
-# only with Linux, and only with newer kernels (1.1.20+)
-
-# define -DSLAVE_SENDS_NAK_TOO if you have problems answering incoming
-# EMSI sessions originated by FrontDoor. FrontDoor does not follow
-# EMSI specifications when originating calls, this is a workaround.
-
-# define -DDONT_HAVE_DIRENT if there is no working opendir()/readdir()
-# etc. in your libc. You will aso need to add "dirent.o" to the NEEDED
-# (see below).
-
-# Linux:
-OPTS = -DHAS_STATFS -DSTATFS_IN_VFS_H -DHAS_SETSID -DHAS_NDBM_H \\
- -DDONT_HAVE_TM_GMTOFF -DHAS_TERMIOS_H -DASCII_LOCKFILES \\
- -DHAS_FSYNC -DHAS_IOCTL_H -DHAS_REGEX_H -DHAS_TCP \\
- -DFORCEINTL -DHAS_SYSLOG -DNEED_UUCPFROM -DNEED_BSY \\
- -DREGEX_NEED_CARET -DNEED_TRAP -DSLAVE_SENDS_NAK_TOO \\
- -DNEED_FORK -DLESS_RFC_KLUDGES
-
-# 386BSD:
-#OPTS = -DHAS_STATFS -DSTATFS_IN_MOUNT_H -DHAS_SETSID -DHAS_NDBM_H \\
- -DHAS_TERMIOS_H -DASCII_LOCKFILES -DHAS_FSYNC -DHAS_IOCTL_H \\
- -DHAS_REGEX_H -DHAS_TCP -DHAS_SYSLOG -DNEED_UUCPFROM \\
- -DNEED_BSY -DNEED_FORK -DNEGATIVE_SEEK_BUG \\
- -DREGEX_NEED_CARET
-
-# SVR4:
-#OPTS = -DHAS_STATVFS -DDONT_HAVE_TM_GMTOFF -DHAS_SETSID -DHAS_NDBM_H \\
- -DHAS_TERMIOS_H -DHAS_DIAL -DHAS_DIAL_H -DASCII_LOCKFILES \\
- -DHAS_FSYNC -DHAS_IOCTL_H -DHAS_LIBGEN_H -DHAS_TCP \\
- -DHAS_SYSLOG -DREGEX_NEED_CARET
-# SunOS:
-#OPTS = -DHAS_STATFS -DSTATFS_IN_VFS_H -DHAS_SETSID -DHAS_NDBM_H \\
- -DDONT_HAVE_GETOPT -DHAS_TERMIOS_H -DASCII_LOCKFILES \\
- -DHAS_FSYNC -DHAS_TCP -DHAS_SYSLOG \\
- -DREGEX_NEED_CARET
-
-# SCO Unix 3.2v4.2
-#OPTS = -DHAS_STATFS -DSTATFS_IN_STATFS_H -DSCO_STYLE_STATFS \\
- -DHAS_TERMIOS_H -DDONT_HAVE_TM_GMTOFF -DDO_NEED_TIME \\
- -DDONT_HAVE_GETOPT -DASCII_LOCKFILES -DHAS_IOCTL_H \\
- -DHAS_TCP -DHAS_SYSLOG \\
- -DREGEX_NEED_CARET
-
-# ISC Unix 3.2 v3.0
-#OPTS = -DHAS_STATFS -DSTATFS_IN_STATFS_H -DHAS_TERMIO_H \\
- -DDONT_HAVE_TM_GMTOFF -DDONT_HAVE_GETOPT \\
- -DASCII_LOCKFILES -DHAS_IOCTL_H -DSCO_STYLE_STATFS \\
- -DUSE_POLL -DHAS_NET_ERRNO_H -DSHORT_PID_T \\
- -DHAS_TCP -DHAS_SYSLOG \\
- -DREGEX_NEED_CARET
-# On ISC, if you are suing gcc, you can run into a trouble with sscanf()
-# function. It appears that sscanf(string,"%d.%d",&int1,&int2) where
-# string is a constant segfaults unless you specify "-fwritable-strings"
-# to gcc. I would say that this is a bug in ISC libc. If nessecary,
-# add this to the defines above. If you have ISC version 4.0 or later,
-# you can add "-posix", remove "-DSHORT_PID_T" and specify "-DHAS_TERMIOS"
-# to get benefit of posix terminal control.
-
-# for make install, where to put binaries and what owner to set
-BINDIR = $BINDIR
-OWNER = fnet
-GROUP = uucp
-MODE = 0711
-SMODE = 4711
-
-INSTALL = install
-RANLIB = ranlib
-#RANLIB = touch
-SHELL = /bin/sh
-ECHO = echo -e
-CC = gcc
-YACC = bison -y
-#YACC = yacc
-LEX = flex
-#LEX = lex
-AWK = awk
-TAR = tar
-
-#CFLAGS = -g -Wall
-# Linux, 386BSD, SunOS:
-CFLAGS = -O2 -Wall -m486 -s
-# SVR4:
-#CFLAGS = -O -Xa
-
-LDFLAGS = -s
-
-# For LIBS, you may need to add "-lfl" if you are using flex 2.4.x
-# If you need TERM also add e.g. "/usr/src/term112/client.a"
-
-# Linux
-LIBS = -ldbm
-# SunOS:
-#LIBS =
-# 386BSD:
-#LIBS = -lgdbm -lgnuregex
-# SVR4
-#LIBS = -ldbm -lform -lnsl -lsocket -lc -L/usr/ucblib -lucb
-# SCO
-#LIBS = -ldbm -lsocket -lintl
-# ISC
-#LIBS = -lcposix -lmalloc -ldbm -linet -lPW
-
-INCLUDES = -I\${INCDIR}
-# ISC
-#INCLUDES = -I/usr/include/rpcsvc -I\${INCDIR}
-
-# What programs are absent at your system?
-#NEEDED = strcasestr.o strncasecmp.o strcasecmp.o rename.o mkdir.o usleep.o \\
- regexpr.o
-# Linux
-NEEDED =
-# SVR4
-#NEEDED = regexpr.o
-# SCO
-#NEEDED = strcasestr.o strncasecmp.o strcasecmp.o usleep.o regexpr.o
-# SunOS and 386BSD
-#NEEDED = signal.o
-# ISC
-#NEEDED = usleep.o regexpr.o vsyslog.o
-EOF
-
-}
-
-# Args: package.tgz, bin_dir, cfg_dir, log_dir, version, where_to_put_src
-install_ifmail() {
- dialog --backtitle "$TITLE" --infobox "Installo e compilo Ifmail..." 0 0
-
- AKAPRI="`cut $AKASETUP -f1 -d:`"
- int2fido $AKAPRI
- AKAPRIFTN=$_RETVAL
-
- if [ -f $COPIUSER ]
- then
- POST="`cat $COPIUSER`"
- else
- POST=root
- fi
-
- TGZ="$1"
- BINDIR="$2"
- CFGDIR="$3"
- LOGDIR="$4"
- VERSION="$5"
- SRC="$6"
-
-###################################################
-## passwd e group
-####################################
-
- if [ "`cut /etc/passwd -f1 -d: | grep -x fnet`" ]
- then
- mkstemp passwd
- grep -v "fnet:" /etc/passwd >$tmp_passwd
- save /etc/passwd
- mv $tmp_passwd /etc/passwd
- fi
-
- find_unused_uid 92
- echo "fnet:*:$FOUND_UID:14:Fidonet Gate:$BINDIR:" >>/etc/passwd
-
-
-####################################################
-#### dirs and files
-###################################
- mkdir -p $CFGDIR $LOGDIR /var/spool/ifmail/{BAK,nl.d} $BINDIR/magic
- chown fnet.uucp $BINDIR{,/magic} $CFGDIR $LOGDIR /var/spool/ifmail/{,BAK,nl.d}
- touch $LOGDIR/{ifdebug,iflog,sysiflog,TheLog}
- chown fnet.uucp $LOGDIR/{ifdebug,iflog,sysiflog,TheLog}
-
-##########################################################################
-#### COMPILAZIONE
-####################################
-
- SRC="$SRC/`tar zxvf $TGZ -C $SRC | head -1`"
-# ora in $SRC c'e' il path completo dei source Ifmail
-
- copi.ifmCfg $SRC $BINDIR $CFGDIR $LOGDIR $VERSION
- patch -N -d $SRC <ifpatch 2>/dev/null
- make clean -C $SRC
- make -C $SRC
-##########################################################################
-#### INSTALLAZIONE
-####################################
- make install -C $SRC
-}
-
-
-# Args: bin_dir, cfg_dir, log_dir, passwords
-# note: passwords are colon-separated (":")
-configure_ifmail() {
- dialog --backtitle "$TITLE" --infobox "Configuro Ifmail..." 0 0
-
- BINDIR=$1
- CFGDIR=$2
- LOGDIR=$3
- PASSWDS=$4
-
- SPD="` cut $EMSIFILE -f1`"
- SYSNAME="` cut $EMSIFILE -f2`"
- LOCATION="` cut $EMSIFILE -f3`"
- COMPLETE_PHONE="` cut $EMSIFILE -f4`"
- INTERCOUNTRYPREF="`cut $EMSIFILE -f5`"
- LONG_DIST_PREFIX="`cut $EMSIFILE -f6`"
- NODEFLAGS="` cut $EMSIFILE -f7`"
- DIALSTRING="` cut $EMSIFILE -f8`"
- SYSOP="` cut $EMSIFILE -f9`"
-
- COUNTRYPREF="`echo $COMPLETE_PHONE | cut -f1 -d'-'`"
- PREF="` echo $COMPLETE_PHONE | cut -f2 -d'-'`"
- PHONE="` echo $COMPLETE_PHONE | cut -f3 -d'-'`"
-
- FNETCFG=$CFGDIR/config
- AREAS=$CFGDIR/Areas
-
- POINTS="`cat $PNTSETUP`"
- POST="`cat $COPIUSER`"
- AKAPRI="`cut $AKASETUP -f1 -d:`"
- int2fido "$AKAPRI"
- AKAPRIFTN="$_RETVAL"
-
-#invece di "cp $SRC/misc/inn/send-ifmail ~news"
-#-----------------------------------------------------------------------------
- cp copi.sendifm1 ~news/send-ifmail
- cat <<EOF >>~news/send-ifmail
--p"$BINDIR/ifnews %s" \\
-EOF
- cat copi.sendifm2 >>~news/send-ifmail
-
- chmod 550 ~news/send-ifmail
- chown news.news ~news/send-ifmail
-
-#invece di "cp $SRC/misc/contrib/ifreq $BINDIR"
-#-----------------------------------------------------------------------------
- cp copi.ifreq1 $BINDIR/ifreq
- cat <<EOF >>$BINDIR/ifreq
-# ifcico-config-file:
-\$config = "$CFGDIR/config";
-
-# change this to the default node, where requests should go to.
-\$node = "$AKAPRIFTN";
-EOF
- cat copi.ifreq2 >>$BINDIR/ifreq
-
- chmod 755 $BINDIR/ifreq
- chown fnet.uucp $BINDIR/ifreq
-
-#invece di "cp $SRC/misc/contrib/ifman $BINDIR"
-#-----------------------------------------------------------------------------
- cp copi.ifman1 $BINDIR/ifman
- cat <<EOF >>$BINDIR/ifman
-\$cfgfile="$CFGDIR/config"; # where the config is
-\$ifowner="fnet"; # who is the owner of the ifmail
-
-EOF
- cat copi.ifman2 >>$BINDIR/ifman
-
- chmod 755 $BINDIR/ifman
- chown fnet.uucp $BINDIR/ifman
-
-#invece di "cp $SRC/misc/contrib/ifpoll $BINDIR"
-#-----------------------------------------------------------------------------
- cp copi.ifpoll1 $BINDIR/ifpoll
- cat <<EOF >>$BINDIR/ifpoll
-FIDOPATH=$BINDIR
-LOGPATH=$LOGDIR
-
-# sysop of fido stuff
-IFCICO_SYSOP=$POST
-
-# my boss node (default address to poll)
-NODE=$AKAPRI
-EOF
- cat copi.ifpoll2 >> $BINDIR/ifpoll
-
- chmod 755 $BINDIR/ifpoll
- chown fnet.uucp $BINDIR/ifpoll
-
-
-#########################################################
-##### se in syslog.conf non c'e' "local0.*", lo aggiunge
-################################
-
- SYSLOG="`grep \"local0.* \" /etc/syslog.conf`"
- SYSCHECK_A="`echo \"$SYSLOG\" | cut -f1 | grep -x \"local0.*\"`"
- SYSCHECK_B="`echo \"$SYSLOG\" | cut -f2- | grep $LOGDIR/sysiflog`"
- MYSYSLOG="local0.*\t\t\t\t\t$LOGDIR/sysiflog"
-
- if [ ! "$SYSCHECK_A" -o ! "$SYSCHECK_B" ]
- then
- echo -e "\n# For ifmail" >> /etc/syslog.conf
- echo -e "$MYSYSLOG" >>/etc/syslog.conf
- killall -1 syslogd
- fi
-
-
-########################
- save $AREAS
- :> $AREAS
- chown fnet.uucp $AREAS
-
- save $FNETCFG
- cat <<EOF >$FNETCFG
-# Configuration file for ifmail (ifgate+ifcico) package by Eugene Crosser
-# Compile-time default name of this file may be overridden by -I key.
-#
-# Lines with the first nonblank character '#' are comments.
-#
-# Log file name. Overrides compile-time default.
-logfile $LOGDIR/iflog
-
-# Debug file name. Overrides compile-time default.
-debugfile $LOGDIR/ifdebug
-
-# Debugging verbosity level (is overidden by -x key). Default is 0.
-# WARNING: if >0 your messages will go in /tmp/ifmail !!!!!!!!!!!!!!!!!!
-verbose 0
-
-# The first is the main address:
-EOF
-#----------------------------
-
- AKA="any"
- IAKA=0
- while [ "$AKA" ]
- do
- IAKA=$[$IAKA+1]
- AKA="`cut $AKASETUP -f$IAKA -d:`"
- if [ "$AKA" ]
- then
- int2fidonet $AKA
- AKAFTN="`echo $_RETVAL | cut -f1 -d.`"
- echo "# aka for `echo $AKAFTN | cut -f2 -d '@'`" >> $FNETCFG
-
- POINT="`echo $POINTS | cut -f$IAKA -d:`"
-
- AKAFTN="`echo $AKAFTN | cut -f1 -d '@'`.$POINT@`echo $AKAFTN | cut -f2 -d '@'`"
-
- echo "address $AKAFTN" >> $FNETCFG
- fi
- done
-
-#----------------------------
- cat <<EOF >>$FNETCFG
-
-# Passwords for nodes. Not checked by iftoss (unless -DPARANOID specified
-# at compile-time), checked by ifcico.
-# Inserted into outgoing mail packets, EMSI and yoohoo packets.
-EOF
-#----------------------------
-
- AKA="any"
- IAKA=0
- while [ "$AKA" ]
- do
- IAKA=$[$IAKA+1]
- AKA="`cut $AKASETUP -f$IAKA -d:`"
- if [ "$AKA" ]
- then
- int2fido $AKA
- AKAFTN=$_RETVAL
-
- PASSWD="`echo $PASSWDS | cut -f$IAKA -d:`"
- if [ "$PASSWD" ]
- then
- echo "password $AKAFTN $PASSWD" >> $FNETCFG
- fi
- fi
- done
-
-#----------------------------
- cat <<EOF >>$FNETCFG
-
-# Include config extention file (here: file with real passwords).
-# Includes may be nested. If the nesting is cyclic, the program cycles too.
-# You are warned.
-# include $CFGDIR/passwds
-
-# System alias file - try to fetch ftn-style aliases from there.
-# If "from" address of a message from FidoNet matches _right_ side
-# of some entry in sysalias file, then the Reply-To: header is created
-# in the RFC message with the name part taken from the left side of the
-# sysalis entry and domain part taken from myfqdn (below). E.g., if a
-# fidonet message comes from "John Smith of 1:234/567.89@fidonet" and
-# there is an entry in the sysalias file:
-# "jsmith: John.Smith@p89.f567.n234.z1.fidonet.org"
-# and fqdn value is "pccross.msk.su", then the resulting message will
-# contain a line: "Reply-To: jsmith@pccross.msk.su".
-sysalias /etc/aliases
-
-# This host fully qualified domain name to add to the alias above
-myfqdn `hostname -f`
-
-# Directory for incoming packets/files:
-inbound /var/spool/ifmail/inb
-# Directories for "listed" and "protected" sessions
-listinbound /var/spool/ifmail/inb
-protinbound /var/spool/ifmail/inb
-
-# Directory for outgoing packets (default domain and zone):
-# other zones will be like "/var/spool/ifmail/outb.003",
-# other domains will be like "/var/spool/ifmail/<domain>.<zone>"
-outbound /var/spool/ifmail/outb
-
-# Directory from which the file requests are satisfied
-public /var/spool/uucppublic
-
-# Directory with executables to satisfy "magic" file requests
-# if requested a file present in this directory, it will be
-# executed and stdout sent to the remote system. It is dangerous!
-# You are warned.
-magic $BINDIR/magic
-
-# Primary nodelist (serves "outbound" directory and domain from the
-# first "address" statement). Name expanded with ".NNN" if neccessary.
-nodelist /var/spool/ifmail/nl.d/`cut $AKASETUP -f1 -d: | cut -f4 -d.`.ndl
-
-# Secondary nodelists and nodelists for other domains.
-# use directory name from the first "nodelist" statement.
-# filename originating address
-EOF
-#----------------------------
-
- AKA="any"
- IAKA=0
- while [ "$AKA" ]
- do
- IAKA=$[$IAKA+1]
- AKA="`cut $AKASETUP -f$IAKA -d:`"
- if [ "$AKA" ]
- then
- int2fidonet $AKA
- AKAFTN="`echo $_RETVAL | cut -f1 -d.`"
- echo -e "nodelist `echo $AKAFTN | cut -f2 -d '@'`.ndl\t$AKAFTN" >> $FNETCFG
- fi
- done
-
-#----------------------------
- cat <<EOF >>$FNETCFG
-
-# domain translations, just context substitution. Leading dot recommended.
-# May contain '@'-sign too. First matching used.
-# NOTE: If you specify at least one domtrans line, there will be _NO_
-# default for fidonet <--> fidonet.org. Don't forget to specify it
-# explicitly as a last line.
-# FTN side Internet side
-#domtrans f720.n335.z2.fidonet.org giuda.deis.unical.it
-#domtrans .fidonet .fidonet.org
-
-# Automatically updated alias database. If omitted or inaccessible,
-# ^aREPLYADDR and ^aREPLYTO kludges are generated in fido messages.
-database /var/spool/ifmail/ifdbm
-
-# Sequencer file (used to generate unique IDs)
-sequencer /var/spool/ifmail/seq
-
-# Areas file (format: "AREA newsgroup distribution")
-areas $CFGDIR/Areas
-
-# Bad groups prefixes - do not pass to fido if appear in Newsgroups header
-# This is NOT the same as "!news.group" in the cnews "sys" file.
-# badgroup relcom.ads.
-# badgroup relcom.commerce.
-
-# Maximum allowed number of groups in the Newsgroups header, article will
-# not be gated if exeeds. If zero or umitted - no limit.
-# maxgroup 5
-
-# Internet -> FidoNet (outgoing) character mapping table (a la mapchan)
-# outtab $BINDIR/outkoi8alt
-
-# FidoNet -> Internet (incoming) character mapping table
-# intab $BINDIR/outaltkoi8
-
-# Toss program, used by ifunpack
-iftoss $BINDIR/iftoss
-
-EOF
-
- cat copi.ifmcfg2 >>$FNETCFG
-
- if [ $[$[SPD] > $[19200]] = 1 ]; then
- SPDLOCK="L38400"
- elif [ $[$[SPD] > $[9600]] = 1 ]; then
- SPDLOCK="L19200"
- elif [ $[$[SPD] > $[2400]] = 1 ]; then
- SPDLOCK="9600"
- elif [ $[$[SPD] > $[1200]] = 1 ]; then
- SPDLOCK="2400"
- elif [ $[$[SPD] > $[300]] = 1 ]; then
- SPDLOCK="1200"
- else
- SPDLOCK="300"
- fi
-
- echo "ModemPort modem:$SPDLOCK" >>$FNETCFG
- cat copi.ifmcfg5 >>$FNETCFG
-
- echo "PhoneTrans $COUNTRYPREF-$PREF- /" >>$FNETCFG
- echo "PhoneTrans $COUNTRYPREF- / $LONG_DIST_PREFIX" >>$FNETCFG
- echo "PhoneTrans / $INTERCOUNTRYPREF" >>$FNETCFG
- echo "ModemReset ATZ\r" >>$FNETCFG
- echo "ModemDial \d$DIALSTRING\T\r" >>$FNETCFG
-
- cat copi.ifmcfg4 >>$FNETCFG
-
- echo "Name $SYSNAME" >>$FNETCFG
- echo "Location $LOCATION" >>$FNETCFG
- echo "SysOp $SYSOP" >>$FNETCFG
- echo "Phone $COUNTRYPREF-$PREF-$PHONE" >>$FNETCFG
- echo "Speed $SPD" >>$FNETCFG
- echo "Flags $NODEFLAGS" >>$FNETCFG
-
- chown fnet.uucp $FNETCFG
-}
-
-# Args: cfg_dir
-configure_smail() {
- dialog --backtitle "$TITLE" --infobox "Configuro Smail..." 0 0
-
- USER="`cat $COPIUSER`"
- FNETHOME=~fnet
-
- SMAIL=$1
- SMAILCONF=$SMAIL/config
- ALIASES=$SMAIL/aliases
- DIRECTORS=$SMAIL/directors
- ROUTERS=$SMAIL/routers
- TRANSPORTS=$SMAIL/transports
- FTNPATHS=$SMAIL/ftnpaths
-
-# File: config
- save $SMAILCONF
-
- cat <<EOF >$SMAILCONF
-#
-# smail configuration for $HOST.$DOMAIN
-# (see smail(5) man page for details and other options)
-#
-hostnames=$HOST:$HOST.$DOMAIN
-domains=$DOMAIN
-postmaster=$USER
-smtp_banner="\$primary_name Linux Smail\$version #\$compile_num ready at \$date"
-spool_mode=0600
-received_field="Received: \\
- \${if def:sender_host \\
- {from \$sender_host by \$primary_name \\
- \${if def:sender_proto: with \$sender_proto}\\
- \n\t(Linux Smail\$version #\$compile_num) }\\
- else{by \$primary_name \${if def:sender_proto:with \$sender_proto }\\
- (Linux Smail\$version #\$compile_num)\n\t}}\\
- id \$message_id; \$spool_date"
-trusted_users=root:uucp:daemon:fnet
-EOF
-
-
-# File: routers
- save $ROUTERS
-
- cat <<EOF >$ROUTERS
-ifmail: driver=pathalias,
- transport=ifmail;
-
- file=ftnpaths,
- proto=lsearch,
- domain=ftn:org
-EOF
-
-
-# File: transports
- save $TRANSPORTS
-
- cat <<EOF >$TRANSPORTS
-local: driver = appendfile,
- return_path,
- local,
- from,
- unix_from_hack;
-
- file = /var/spool/mail/\${lc:user},
- group = mail,
- mode = 0660,
- suffix = "\n",
- append_as_user
-
-ifmail: driver=pipe,
- from,
- -received,
- max_addrs=5,
- max_chars=200;
-
- pipe_as_sender,
- cmd="$FNETHOME/ifmail -r\$host \$((\${strip:user})\$)"
-
-EOF
-
-
-# File: directors
- save $DIRECTORS
-
-
-# File: aliases
- for i in $ALIASES /etc/aliases /usr/lib/aliases
- do
- if [ ! -L $i -a -f $i ]
- then
- mv $i $i~
- fi
- done
-
- USERNAME="`cut /etc/passwd -f1,5 -d: | grep $USER: | cut -f2 -d: | sed y/\" \"/./`"
- echo "news: $USER" >> $ALIASES
- echo "usenet: $USER" >> $ALIASES
- echo "$USERNAME: $USER" >> $ALIASES
-
- ln -sf $ALIASES /etc/
- ln -sf $ALIASES /usr/lib/
-
- cd $SMAIL # is this necessary?? E-mail me if you know,please
- mkaliases >/dev/null
-
-# File: ftnpaths
- save $FTNPATHS
-
- OK=1
- IAKA=1
- while [ $OK != 0 ]; do
- AKA="`cut $AKASETUP -f$IAKA -d:`"
- IAKA=$[$IAKA+1]
- if [ ! "$AKA" ]; then
- OK=0
- else
- echo -e ".`echo $AKA | cut -f4 -d.`\t\t$AKA!%s" >>$FTNPATHS
- fi
- done
-
-
-# misc section
-
- chmod 1775 /var/spool/mail
- chgrp mail /var/spool/mail
-
- cd $SMAIL
- touch forward
- /usr/lib/smail/mkdbm forward
-
-# reload sendmail
- killall sendmail 2>/dev/null
- /usr/sbin/sendmail -bd -q15m # if inetd handles smtp port, this will not load
-}
diff --git a/Build/source/utils/dialog/dialog-1.1-20080819/samples/copifuncs/copi.ifman1 b/Build/source/utils/dialog/dialog-1.1-20080819/samples/copifuncs/copi.ifman1
deleted file mode 100755
index 3e271a532e2..00000000000
--- a/Build/source/utils/dialog/dialog-1.1-20080819/samples/copifuncs/copi.ifman1
+++ /dev/null
@@ -1,29 +0,0 @@
-#! /usr/bin/perl
-#
-# This is a utility script to manipulate Fidonet-related issues
-# using Eugene Crosser's ifmail package
-#
-# Version 0.1
-#
-# (C) Michael Bravo and The Communication Tube, 1994
-#
-# You can do whatever you want with this script. I take no responsibility
-# whatsoever in anything related to this script. If you make some useful
-# additions to this, please think of sending them to me so I could partake
-# of your wisdom.
-#
-# This script was written to help attaching and requesting files from the
-# commandline, much like you do with Squish under DOS or OS/2. It is certainly
-# not perfect - I used it as an exercise in Perl. It also probably lacks
-# some other useful features, like ability to specify trunc/sent or kill/sent
-# attributes etc etc. If you really want this or some other features
-# implemented, write me at mbravo@tctube.spb.su or mbravo@octopus.spb.su
-# and I will try to do what I can.
-#
-# Note - files don't get copied to any spool dir, so if you move attached
-# files somewhere, they won't get sent.
-#
-# This script is supposed to read ifmail's config to determine where outbound
-# directory and logfile are. The only two parameters to modify in most cases
-# are below.
-
diff --git a/Build/source/utils/dialog/dialog-1.1-20080819/samples/copifuncs/copi.ifman2 b/Build/source/utils/dialog/dialog-1.1-20080819/samples/copifuncs/copi.ifman2
deleted file mode 100755
index 0b6dbb77ded..00000000000
--- a/Build/source/utils/dialog/dialog-1.1-20080819/samples/copifuncs/copi.ifman2
+++ /dev/null
@@ -1,137 +0,0 @@
-if ( getpwuid($<) ne $ifowner ) { print "You must be owner of ifmail\n"; exit 1; }
-
-if ( (@ARGV < 3) || $ARGV[0] eq "-?" || $ARGV[0] eq "-h" ) {
- &usage;
-}
-
-$ARGV[0] =~ tr/A-Z/a-z/;
-$ARGV[3] =~ tr/A-Z/a-z/;
-
-&parsecfg;
-
-if ( $logfile ne "" ) {
- open(LOG, ">>".$logfile) || die "Can't open logfile";
-}
-
-if (substr($ARGV[1], 0, 1) ne "/") {
- $cwd=`pwd`;
- chop $cwd;
- $ARGV[1] = $cwd."/".$ARGV[1];
-}
-
-if ($ARGV[3] eq "" || $ARGV[3] eq "normal") {
- $flavour = 'f';
-} elsif ($ARGV[3] eq "crash") {
- $flavour = 'c';
-} elsif ($ARGV[3] eq "hold") {
- $flavour = 'h';
-} else {
- print "Unknown flavour, assuming normal\n";
- $flavour = 'f';
-}
-
-if ($ARGV[0] eq "send") {
- &attach($ARGV[1], $ARGV[2]);
-} elsif ($ARGV[0] eq "get") {
- &request($ARGV[1], $ARGV[2]);
-} else {
- print "Unknown command, try ifman -h\n";
- exit 1;
-}
-
-close(LOG);
-
-exit 0;
-
-#######################################################################
-
-sub attach {
- local($fspec, $address) = @_;
-
- $floname = &resolve($address);
-
- open(FLO, ">>".$outbound."/".$floname) || die "Can't open flo-file $outbound/$floname";
- open(FIND, "find $fspec -print |") || die "Can't generate list of files";
-
- if ( eof(FIND) ) {
- print "No matching files, nothing to send\n";
- exit 1;
- }
-
- while (<FIND>) {
-
- chop;
- $datestamp = `date \"+%D %T\"`;
- chop $datestamp;
- printf LOG "%s %s %s\n", $datestamp, $$, "ifman: sending $_ to $address";
- printf FLO "%s\n", $_;
- }
-
- close(FLO);
- close(FIND);
-}
-
-sub request {
- local($fspec, $address) = @_;
-
- $reqname = &resolve($address);
-
- $reqname =~ s/\.[fch]lo/\.req/;
-
- open(REQ, ">>".$outbound."/".$reqname) || die "Can't open req-file";
-
- $datestamp = `date \"+%D %T\"`;
- chop $datestamp;
- printf LOG "%s %s %s\n", $datestamp, $$, "ifman: requesting $fspec from $address";
- printf REQ "%s\n", $fspec;
-
- close(REQ);
-}
-
-sub resolve {
- local($addr) = @_;
-
- if ( index($addr, ":") >=0 ) {
- print "I cannot resolve addresses with zones!\n";
- exit 1;
- } elsif ( index($addr, "/") == -1 ) {
- print "Not a valid address!\n";
- exit 1;
- }
-
- ($net, $node, $point) = split(/\/|\./, $addr);
-
- if ( defined $point ) {
- $pointdir = sprintf("%04x%04x.pnt", $net, $node);
- if ( ! -e $outbound."/".$pointdir ) {
- mkdir ($outbound."/".$pointdir, 0755) || die "Can't create point directory";
- }
- $flo = sprintf("0000%04x.%01slo", $point, $flavour);
- return $pointdir."/".$flo;
- } else {
- $flo = sprintf("%04x%04x.%01slo", $net, $node, $flavour);
- return $flo;
- }
-}
-
-sub usage {
- print "ifmail manager script\n";
- print "usage: ifman <cmd> <filespec> <address> [flavour]\n";
- print " commands: send, get\n";
- print " flavours: normal, crash, hold. Default is normal.\n";
- print "Only 2d addresses with points are supported - no zones!\n";
- exit 1;
-}
-
-sub parsecfg {
- open(CFG, $cfgfile) || die "Can't open ifmail config file";
-
- while (<CFG>) {
- chop;
- if (/^#/) { next; }
- if (/^outbound\s+(\S+)/) { $outbound = $1; }
- if (/^logfile\s+(\S+)/) { $logfile = $1; }
- }
-
- close(CFG);
-}
diff --git a/Build/source/utils/dialog/dialog-1.1-20080819/samples/copifuncs/copi.ifmcfg2 b/Build/source/utils/dialog/dialog-1.1-20080819/samples/copifuncs/copi.ifmcfg2
deleted file mode 100755
index c8a8c03d664..00000000000
--- a/Build/source/utils/dialog/dialog-1.1-20080819/samples/copifuncs/copi.ifmcfg2
+++ /dev/null
@@ -1,68 +0,0 @@
-# Transport programs for mail and news, used by iftoss
-sendmail /usr/lib/sendmail -f $F $T
-rnews /usr/lib/news/rnews
-
-# Unpackers, used by ifunpack.
-# $F expands to archieve file name
-unzip /usr/bin/unzip -oq $F
-unarj /usr/bin/unarj e $F
-#unarc /usr/bin/unpack $F
-unzoo /usr/bin/zoo -extract $F
-unlzh /usr/bin/lharc -x $F
-
-# Packer program, used by ifpack
-# $F expands to archieve file name, $P - to list of packet names
-packer /usr/bin/zip $F $P
-
-# Maximum arcmail file size, will start new arcmail file if exceeds
-maxfsize 65000
-
-# Maximum packet size, ifmail/ifnews will start new packet if exeeds.
-# .out files are NOT created if nonzero specified, you must run ifpack
-# to make packets out. (unimplemented)
-maxpsize 65000
-
-# cnews log file and (temporary) database for seen-bys
-newslog /usr/lib/news/log
-msgidbm /tmp/ifmsgids
-
-# From this line on, values may be prefixed by a logical expression in
-# round brackets. Operators are: '!', '&', '|', 'Xor'.
-# Possible elements are:
-# - Nodelist flags (like "CM", "MNP", "V32" etc.)
-# - speed <operator> <numeric>
-# where <operator> is '=', '!=', '<', '>', '<=', '>='
-# - address <wildcard>
-# where <wildcard> is an (possibly incomplete) fidonet address,
-# e.g. "5020/*"
-# - time <interval>[,<interval>,...]
-# where <interval> is a day spec. with optional time spec., e.g.
-# Wk2000-0900,Sat1800-0000,Sun
-# - phone <prefix>
-# e.g. "phone 7-095-"
-
-# Dialing parameters
-# of multiple "ModemPort", "ModemReset", "ModemDial", "ModemHangup" lines,
-# first matching is used.
-# of multiple "PhoneTrans", "ModemConnect", "ModemError" lines, all matching
-# are used.
-# In send and expect strings, following substitutions are made:
-# \\ '\' character
-# \r carriage return (0x0d)
-# \n new line (0x0a)
-# \t tab (0x09)
-# \b backspace (0x08)
-# \s space (0x20)
-# \NNN (where N is an octal digit) - character with octal code NNN
-# \d 1 second delay (send strings only)
-# \p 1/4 second pause (send strings only)
-# \T translated telephone no. (send strings only)
-# \D untranslated telephone no. (send strings only)
-
-# ModemPort present a blank-separated list of ports with possible speed
-# extention (separated by colon); if speed is prefixed with 'L', it is
-# a "locked" port speed, otherwise it is a maximum speed to be set, while
-# actual speed is taken from the nodelist. If speed is omitted (or set
-# to zero), previous port speed is not changed.
-#ModemPort (time Any0000-0900,Sat,Sun) ttyS0
-#ModemPort cua0:L38400
diff --git a/Build/source/utils/dialog/dialog-1.1-20080819/samples/copifuncs/copi.ifmcfg4 b/Build/source/utils/dialog/dialog-1.1-20080819/samples/copifuncs/copi.ifmcfg4
deleted file mode 100755
index 4cb7a75b1fc..00000000000
--- a/Build/source/utils/dialog/dialog-1.1-20080819/samples/copifuncs/copi.ifmcfg4
+++ /dev/null
@@ -1,30 +0,0 @@
-ModemHangup +++ATH\r
-ModemOK OK
-ModemConnect CONNECT
-ModemError BUSY
-ModemError NO\sCARRIER
-ModemError NO\sDIAL
-ModemError RING\r
-ModemError ERROR
-
-# Call options (time, address and nodelist flag dependant)
-# All matching are applied in the order they are specified.
-# Possible options are "[No]Call", "[No]Hold", "[No]PUA", "[No]EMSI",
-# "[No]WaZOO", "[No]Freqs", "[No]Zmodem", "[No]ZedZap", "[No]Janus",
-# "[No]Hydra". Here, WaZOO stands for YooHoo/2U2 handshake, not for
-# the transfer scheme. FTS-0001 handshake and DietIFNA scheme cannot
-# be disallowed (because they are mandatory by standart). "Hold"
-# means really hold "hold" type packets and files: do not send them
-# if our system initiated the session, "NoHold" means send "hold"
-# packets when our system initiated the session. "NoPUA" stands for
-# "No PickUp All", i.e. PUP ("Pick Up Primary"). NoCall means do not
-# perform outbound call. This flag has no effect on the nodes
-# explicitly specified in the command line.
-# Default options are "everything allowed".
-# options ((!CM) & time Any0700-0200) Nocall
-#options (time Any0900-2100 & ! address 2:5020/*) Nocall
-
-# EMSI data for this node
-# From this line on values CANNOT be prefixed with logical expression
-# For now, escaping of '}' and ']' unimplemented, try to avoid these
-# characters please!
diff --git a/Build/source/utils/dialog/dialog-1.1-20080819/samples/copifuncs/copi.ifmcfg5 b/Build/source/utils/dialog/dialog-1.1-20080819/samples/copifuncs/copi.ifmcfg5
deleted file mode 100755
index 8221c1cf160..00000000000
--- a/Build/source/utils/dialog/dialog-1.1-20080819/samples/copifuncs/copi.ifmcfg5
+++ /dev/null
@@ -1,14 +0,0 @@
-
-# PhoneTrans lines provide rules to change phone prefixes to make local
-# or long-distance calls. In the example below, my country code is 7,
-# and local dialing area is 095. From the numbers starting with "7-095-"
-# the prefix is stripped and the 7-digit remainder is dialed. For
-# the numbers starting with "7-" but not with "7-095-", the country prefix
-# "7-" is stripped and the long-distance dialing prefix "8W" substituted.
-# For the numbers not matching any of the above, international
-# call is performed: international dialing prefix "8W10" is prepended
-# to the unmodified 11-digit number. Generally, the syntax is:
-# "PhoneTrans <what-to-strip> / <what-to-substitute-instead>"
-#PhoneTrans 7-095- /
-#PhoneTrans 7- / 8W
-#PhoneTrans / 8W10
diff --git a/Build/source/utils/dialog/dialog-1.1-20080819/samples/copifuncs/copi.ifpoll1 b/Build/source/utils/dialog/dialog-1.1-20080819/samples/copifuncs/copi.ifpoll1
deleted file mode 100755
index 812c8e9cd0d..00000000000
--- a/Build/source/utils/dialog/dialog-1.1-20080819/samples/copifuncs/copi.ifpoll1
+++ /dev/null
@@ -1,9 +0,0 @@
-#!/bin/sh
-# ver 0.7
-# ifpoll, poll my boss node or the node given as argument 1
-#
-# i start this shell script every day by crond, but you can
-# start it also by hand :) start it as the owner of ifcico.
-# rasca, berlin 1993 (Rasca Gmelch, 2:2410/305.4)
-#
-# where "ifcico" and "ifpack" reside
diff --git a/Build/source/utils/dialog/dialog-1.1-20080819/samples/copifuncs/copi.ifpoll2 b/Build/source/utils/dialog/dialog-1.1-20080819/samples/copifuncs/copi.ifpoll2
deleted file mode 100755
index 216bff08583..00000000000
--- a/Build/source/utils/dialog/dialog-1.1-20080819/samples/copifuncs/copi.ifpoll2
+++ /dev/null
@@ -1,107 +0,0 @@
-
-# Packets backup directory - You have to CREATE this directory
-BAK=/var/spool/ifmail/BAK
-
-# logfile of ifcico
-IFLOG=/var/log/ifmail/sysiflog
-
-# log archive
-IFLOGARC=/var/log/ifmail/TheLog
-
-# owner of "ifcico"
-IFCICO_OWNER=fnet
-
-# how often should i try to call NODE?
-MaxTry=30
-
-# delay between outgoing calls in seconds
-DELAY=10
-
-# where to log processing - file or tty/console
-INFO_TTY=/dev/console
-
-# Lets backup the log and use a new one
-if [ -e $IFLOG ]; then
- echo Rearranging logs...
- cat $IFLOG >> $IFLOGARC
- cp /dev/null $IFLOG
-fi
-
-echo "`date \"+%b %d %T\"` ifpoll[$$]: starting" # >> $INFO_TTY
-
-# remember me, not to run as root..
-#
-if [ `whoami` != "$IFCICO_OWNER" ]; then
- echo "*** run $0 as the owner of ifcico ***"
- echo "`date \"+%b %d %T\"` ifpoll[$$]: wrong uid (rc 2)" # >> $INFO_TTY
- exit 2
-fi
-
-# argv[1] is the optional node to call
-#
-if [ "$1" != "" ]; then
- if [ "$1" = "-?" ] || [ "$1" = "-h" ]; then
- echo "usage: ifpoll [<node>]"
- exit 3
- else
- NODE=$1
- fi
-fi
-
-# let's pack the fido stuff..
-#
-$FIDOPATH/ifpack
-
-# loop until ifcico could connect the node or MaxTry is encountered
-#
-i=1; errlv=1
-while let 'i <= MaxTry' && let 'errlv != 0'
-do
- echo -n "`date \"+%b %d %T\"` ifpoll[$$]: $i. try ($NODE) " # >> $INFO_TTY
- #
- # start ifcico in master mode ..
- #
- $FIDOPATH/ifcico -r 1 $NODE
- errlv=$?
- if [ $errlv != "0" ]; then
- echo "failed" # >> $INFO_TTY
- if [ $i != $MaxTry ]; then
- sleep $DELAY
- fi
- let i=i+1
- else
- echo "ok :)" # >> $INFO_TTY
- fi
-done
-
-# if the poll was fine, unpacking..
-#
-if [ $errlv = "0" ]; then
- echo "`date \"+%b %d %T\"` ifpoll[$$]: unpacking.. " # >> $INFO_TTY
- cp -f /var/spool/ifmail/inb/*.* $BAK
- $FIDOPATH/ifunpack
- # add here some additional lines for processing tic files or
- # incoming file-lists or simular..
-else
- # write me a mail about the failed poll
- tail --lines=20 $IFLOG | elm -s "ifpoll: failed" $IFCICO_SYSOP >/dev/null
-fi
-
-echo "`date \"+%b %d %T\"` ifpoll[$$]: finished (rc $errlv)" # >> $INFO_TTY
-
-# Collect some infos...
-echo ""
-echo "*** Outgoing File Transfer Stats: ***"
-grep sent $IFLOG
-echo "*** Incoming File Transfer Stats: ***"
-grep received $IFLOG
-echo ""
-
-echo "---->> New mail: <<-----"
-grep echomail $IFLOG
-echo "---->> Personal mail: <<-----"
-grep "mail from" $IFLOG
-echo ""
-
-# return the errorlevel of ifcico
-exit $errlv
diff --git a/Build/source/utils/dialog/dialog-1.1-20080819/samples/copifuncs/copi.ifreq1 b/Build/source/utils/dialog/dialog-1.1-20080819/samples/copifuncs/copi.ifreq1
deleted file mode 100755
index 637293954bd..00000000000
--- a/Build/source/utils/dialog/dialog-1.1-20080819/samples/copifuncs/copi.ifreq1
+++ /dev/null
@@ -1,20 +0,0 @@
-#!/usr/bin/perl
-$ver = "0.4";
-#
-# this perl script is designed for the ifmail package by eugene grosser.
-#
-# request a file (first argument) from a fido-node (second argument),
-# don't forget to quote if you use wildcards, e.g.:
-
-# ifreq 'files*' 2:2410/305
-# or
-# ifreq 'files newfile' 2:2410/305
-#
-# this perl script does only add an entry to the corresponding flo-file,
-# the mailer ifcico is not started!
-#
-# rasca, berlin 1994 (rasca@marie.physik.tu-berlin.de, 2:2410/305.4)
-#
-# multi-zone support added by
-# Roland Rosenfeld 15.05.1994 (roland@p13.flokiste.fido.de, 2:2450/300.13)
-
diff --git a/Build/source/utils/dialog/dialog-1.1-20080819/samples/copifuncs/copi.ifreq2 b/Build/source/utils/dialog/dialog-1.1-20080819/samples/copifuncs/copi.ifreq2
deleted file mode 100755
index 9ee78ff73fe..00000000000
--- a/Build/source/utils/dialog/dialog-1.1-20080819/samples/copifuncs/copi.ifreq2
+++ /dev/null
@@ -1,68 +0,0 @@
-# this is the base directory, where the req-files are stored and the
-# default outbound
-$flo_path = "/var/spool/ifmail";
-$outbound = "/outb"; # don't be confused, it means "/var/spool/ifmail/outb"
-
-# end of configuration #############################################
-
-# main()
-#
-if ((@ARGV < 1) || @ARGV > 2 || $ARGV[0] eq "-?") {
- &usage;
-} elsif ($ARGV[1] ne "") {
- $node = $ARGV[1];
-}
-$file = $ARGV[0];
-
-if (! ($node =~ /\d+:\d+\/\d+/)) {
- die "Wrong address: $node!!!";
-}
-
-($zone, $netnode) = split (/:/, $node);
-$reqfile = sprintf("%04x%04x", split(/\//, $netnode));
-
-if ($reqfile eq "00000000") {
- print ("can't resolve the fido address \"$node\"\n");
- &usage;
-} else {
- if ( $zone == 2 ) {
- $reqfile = $flo_path . $outbound . "/" . $reqfile . ".req";
- } elsif ( $zone < 7 ) {
- $reqfile = $flo_path . $outbound . ".00$zone/" . $reqfile . ".req";
- } else {
- $outbound = "";
- open (CONFIG, "< $config") || die "can't open $config";
- while ($_ = <CONFIG>) {
- if ( /^address.*$zone:.*\@(\w*)/ ) { $outbound = $1; }
- }
- if ( $outbound eq "" ) {
- die "No Zone $zone found in $config";
- }
- $reqfile = $flo_path . "/$outbound/" . $reqfile . ".req";
- }
-
- # seperate the file names of the first argument
- @files = split (/\s+/, $ARGV[0]);
-
- # open the flofile for appending
- open(FLOFILE, ">>" . $reqfile) || die "can't open $reqfile";
- while (@files) {
- print (FLOFILE shift(@files), "\n");
- }
- close(FLOFILE);
-
- print ("--- fido request $ver ---------------------------\n");
- print ("requesting \"$file\" from fido-node $node\n");
- print ("--- executing ifstat .. ------------------------\n");
- system("ifstat");
-}
-
-#
-# subroutine "usage"
-#
-sub usage {
- printf ("--- fido request %s -------------\n", $ver);
- printf ("usage: ifreq <file> [<3-d address>]\n");
- printf ("e.g. : ifreq FILES 2:2410/305\n");
- exit 1;
-}
diff --git a/Build/source/utils/dialog/dialog-1.1-20080819/samples/copifuncs/copi.rcnews b/Build/source/utils/dialog/dialog-1.1-20080819/samples/copifuncs/copi.rcnews
deleted file mode 100755
index 957a272ee49..00000000000
--- a/Build/source/utils/dialog/dialog-1.1-20080819/samples/copifuncs/copi.rcnews
+++ /dev/null
@@ -1,79 +0,0 @@
-#! /bin/sh
-## $Revision: 1.1 $
-## News boot script.
-
-## =()<. @<_PATH_SHELLVARS>@>()=
-. /usr/lib/news/innshellvars
-
-## Pick ${INND} or ${INNDSTART}
-WHAT=${INNDSTART}
-## Set to true or false
-DOINNWATCH=false
-MAIL="${MAILCMD} -s 'Boot-time Usenet warning on `hostname`' ${NEWSMASTER}"
-
-## RFLAG is set below; set FLAGS as appropriate.
-RFLAG=""
-FLAGS="-i0 -c0"
-
-## Clean shutdown?
-if [ -f ${SERVERPID} ] ; then
- ( echo 'INND: PID file exists -- unclean shutdown!' >/dev/console )
- RFLAG="-r"
-fi
-
-if [ ! -f ${NEWSLIB}/.news.daily ] ; then
- echo 'No .news.daily file; need to run news.daily?' | eval ${MAIL}
-else
- case `find ${NEWSLIB} -name .news.daily -mtime +1 -print 2>/dev/null` in
- "")
- ;;
- *)
- echo 'Old .news.daily file; need to run news.daily?' | eval ${MAIL}
- ;;
- esac
-fi
-
-## Active file recovery.
-if [ ! -s ${ACTIVE} ] ; then
- if [ -s ${NEWACTIVE} ] ; then
- mv ${NEWACTIVE} ${ACTIVE}
- else
- if [ -s ${OLDACTIVE} ] ; then
- cp ${OLDACTIVE} ${ACTIVE}
- else
- ( echo 'INND: No active file!' >/dev/console )
- exit 1
- fi
- fi
- RFLAG="-r"
- # You might want to rebuild the DBZ database, too:
- #echo "cd ${NEWSLIB} \
- # && makehistory -r \
- # && mv history.n.dir history.dir \
- # && mv history.n.pag history.pag" | su ${NEWSUSER}
-fi
-
-## Remove temporary batchfiles and lock files.
-( cd ${BATCH} && rm -f bch* )
-( cd ${LOCKS} && rm -f LOCK* )
-( cd ${TEMPSOCKDIR} && rm -f ${TEMPSOCK} )
-rm -f ${NEWSCONTROL} ${NNTPCONNECT} ${SERVERPID}
-
-## Start the show.
-( echo 'Starting innd.' >/dev/console )
-eval ${WHAT} ${RFLAG} ${FLAGS}
-
-# Gee, looks like lisp, doesn't it?
-${DOINNWATCH} && {
- echo "( ( sleep 60 ; ${INNWATCH} ) & )" | su ${NEWSUSER}
-}
-
-RMFILE=${MOST_LOGS}/expire.rm
-if [ -s ${MOST_LOGS}/expire.rm ] ; then
- ( echo "Removing articles from pre-downtime expire run." >/dev/console )
- (
- echo 'System shut down during expire. Unlinking articles listed in'
- echo ${RMFILE}
- ) | eval ${MAIL}
- echo "${NEWSBIN}/expirerm ${RMFILE}" | su ${NEWSUSER} &
-fi
diff --git a/Build/source/utils/dialog/dialog-1.1-20080819/samples/copifuncs/copi.sendifm1 b/Build/source/utils/dialog/dialog-1.1-20080819/samples/copifuncs/copi.sendifm1
deleted file mode 100755
index 564b9c60533..00000000000
--- a/Build/source/utils/dialog/dialog-1.1-20080819/samples/copifuncs/copi.sendifm1
+++ /dev/null
@@ -1,74 +0,0 @@
-#! /bin/sh
-## $Revision: 1.1 $
-## SH script to send UUCP batches out.
-
-## =()<. @<_PATH_SHELLVARS>@>()=
-. ~news/innshellvars
-
-PROGNAME=`basename $0`
-LOCK=${LOCKS}/LOCK.${PROGNAME}
-LOG=${MOST_LOGS}/${PROGNAME}.log
-
-MAXJOBS=200
-UUXFLAGS="- -r -gd"
-
-## Start logging.
-test ! -f ${LOG} && touch ${LOG}
-chmod 0660 ${LOG}
-exec >>${LOG} 2>&1
-echo "${PROGNAME}: [$$] begin `date`"
-cd ${BATCH}
-
-## Anyone else there?
-trap 'rm -f ${LOCK} ; exit 1' 1 2 3 15
-shlock -p $$ -f ${LOCK} || {
- echo "${PROGNAME}: [$$] locked by [`cat ${LOCK}`]"
- exit 0
-}
-
-## Who are we sending to?
-if [ -n "$1" ] ; then
- LIST="$*"
-else
- LIST=`ls /usr/spool/news/out.going|egrep "f[0-9]*.n[0-9]*$"`
-fi
-
-case ${HAVE_UUSTAT} in
-DONT)
- TEMP=${TMPDIR}/uuq$$
- uuq -h |tr -d : >${TEMP}
- ;;
-esac
-
-## Do the work...
-
-for SITE in ${LIST}; do
-
- ## See if any data is ready for host.
- BATCHFILE=${SITE}.uucp
- if [ -f ${SITE}.work ] ; then
- cat ${SITE}.work >>${BATCHFILE}
- rm -f ${SITE}.work
- fi
- mv ${SITE} ${SITE}.work
- ctlinnd -s -t30 flush ${SITE} || continue
- cat ${SITE}.work >>${BATCHFILE}
- rm -f ${SITE}.work
- if [ ! -s ${BATCHFILE} ] ; then
- echo "${PROGNAME}: [$$] no articles for ${SITE}"
- rm -f ${BATCHFILE}
- continue
- fi
-
- ## Get the compression flags.
- echo "${PROGNAME}: [$$] begin ${SITE}"
- case "${SITE}" in
- phreak)
- COMPRESS="compress"
- ;;
- *)
- COMPRESS="gzip"
- ;;
- esac
-
- time batcher \
diff --git a/Build/source/utils/dialog/dialog-1.1-20080819/samples/copifuncs/copi.sendifm2 b/Build/source/utils/dialog/dialog-1.1-20080819/samples/copifuncs/copi.sendifm2
deleted file mode 100755
index 1a34a1fabbc..00000000000
--- a/Build/source/utils/dialog/dialog-1.1-20080819/samples/copifuncs/copi.sendifm2
+++ /dev/null
@@ -1,15 +0,0 @@
- ${SITE} ${BATCHFILE}
-
- echo "${PROGNAME}: [$$] end ${SITE}"
-done
-
-case ${HAVE_UUSTAT} in
-DONT)
- rm -f ${TEMP}
- ;;
-esac
-
-## Remove the lock file.
-rm -f ${LOCK}
-
-echo "${PROGNAME}: [$$] end `date`"
diff --git a/Build/source/utils/dialog/dialog-1.1-20080819/samples/copifuncs/copi.trnrc b/Build/source/utils/dialog/dialog-1.1-20080819/samples/copifuncs/copi.trnrc
deleted file mode 100644
index 7be596f74db..00000000000
--- a/Build/source/utils/dialog/dialog-1.1-20080819/samples/copifuncs/copi.trnrc
+++ /dev/null
@@ -1,13 +0,0 @@
-TRNINIT="-x -e -X -F\" :> \""
-HIDELINE="^X-FTN"
-NEWSHEADER="Newsgroups: %(%F=^\$?%C:%F)
-Subject: %(%S=^\$?%\"\n\nSubject: \":%S)
-%(%R=^\$?:References: %R
-)Sender:
-Distribution: %(%i=^\$?%\"\nDistribution: \":%D)
-Organization: %o
-X-Comment-To: %f\n\n"
-ATTRIBUTION="%f writes:\n"
-YOUSAID="In article %i \n of newsgroup %C you write about \"%s\":\n"
-MAILCALL="(New Mail)"
-export NEWSHEADER HIDELINE TRNINIT ATTRIBUTION MAILCALL YOUSAID EDITOR
diff --git a/Build/source/utils/dialog/dialog-1.1-20080819/samples/copifuncs/copi.wheel b/Build/source/utils/dialog/dialog-1.1-20080819/samples/copifuncs/copi.wheel
deleted file mode 100755
index 567e559a5ab..00000000000
--- a/Build/source/utils/dialog/dialog-1.1-20080819/samples/copifuncs/copi.wheel
+++ /dev/null
@@ -1,54 +0,0 @@
-#!/bin/bash
-# $Id: copi.wheel,v 1.2 2001/01/15 22:26:33 tom Exp $
-
-mkstemp size
-dialog --print-maxsize 2>$tmp_size
-ROWS="`cut $tmp_size -f1 -d, | cut -f2 -d:`"
-COLS="`cut $tmp_size -f2 -d,`"
-rm $tmp_size
-
-# Takes an integer, multiplies it for COLS, divides for 132
-scalex() {
- echo $[$1*$COLS/132]
-}
-scaley() {
- echo $[$1*$ROWS/60]
-}
-
-dialog --backtitle "$TITLE" --no-shadow \
---begin `scaley 27` `scalex 98` --infobox "pushd /var/log >/dev/null" 0 0 --and-widget \
---begin `scaley 35` `scalex 95` --infobox "mkdir -p news -m 755" 0 0 --and-widget \
---begin `scaley 45` `scalex 86` --infobox "chown news.news news" 0 0 --and-widget \
---begin `scaley 48` `scalex 78` --infobox "cd /var/log/news" 0 0 --and-widget \
---begin `scaley 51` `scalex 61` --infobox "mkdir -p OLD -m 755" 0 0 --and-widget \
---begin `scaley 52` `scalex 47` --infobox "chown news.news OLD" 0 0 --and-widget \
---begin `scaley 51` `scalex 40` --infobox "cd /var/spool" 0 0 --and-widget \
---begin `scaley 48` `scalex 25` --infobox "mkdir -p news -m 775" 0 0 --and-widget \
---begin `scaley 42` `scalex 13` --infobox "chown news.news news" 0 0 --and-widget \
---begin `scaley 35` `scalex 4` --infobox "cd /var/spool/news" 0 0 --and-widget \
---begin `scaley 27` `scalex 2` --infobox "CURMASK=`umask`" 0 0 --and-widget \
---begin `scaley 19` `scalex 4` --infobox "umask 02" 0 0 --and-widget \
---begin `scaley 11` `scalex 13` --infobox "mkdir -p out.going control junk in.coming" 0 0 --and-widget \
---begin `scaley 5` `scalex 25` --infobox "chown news.news out.going control junk in.coming" 0 0 --and-widget \
---begin `scaley 2` `scalex 37` --infobox "cd in.coming" 0 0 --and-widget \
---begin `scaley 1` `scalex 46` --infobox "mkdir -p bad tmp" 0 0 --and-widget \
---begin `scaley 2` `scalex 61` --infobox "chown news.news bad tmp" 0 0 --and-widget \
---begin `scaley 5` `scalex 76` --infobox "umask $CURMASK" 0 0 --and-widget \
---begin `scaley 11` `scalex 87` --infobox "ln -sf ~news /usr/local/lib/" 0 0 --and-widget \
---begin `scaley 18` `scalex 95` --infobox "ln -sf ~news/inews /usr/bin/" 0 0 --and-widget \
---begin `scaley 26` `scalex 97` --infobox "chmod 1777 /var/tmp" 0 0 --and-widget \
---begin `scaley 34` `scalex 95` --infobox "cd ~news" 0 0 --and-widget \
---begin `scaley 42` `scalex 87` --infobox "touch history history.dir history.pag errlog log" 0 0 --and-widget \
---begin `scaley 47` `scalex 76` --infobox "chown news.news history* log errlog" 0 0 --and-widget \
---sleep 1 --infobox "Creating spooling and logging directories and files..." 0 0 --and-widget \
---begin `scaley 51` `scalex 78` --infobox "chmod 664 history* log errlog" 0 0 --and-widget \
---begin `scaley 52` `scalex 60` --infobox "echo \"control 0000000000 0000000001 y\" > active" 0 0 --and-widget \
---begin `scaley 51` `scalex 42` --infobox "echo \"junk 0000000000 0000000001 y\" >> active" 0 0 --and-widget \
---begin `scaley 48` `scalex 26` --infobox "chown news.news active" 0 0 --and-widget \
---begin `scaley 42` `scalex 13` --infobox "echo \"control 814573260 usenet\" > active.times" 0 0 --and-widget \
---begin `scaley 35` `scalex 4` --infobox "echo \"junk 814573260 usenet\" >> active.times" 0 0 --and-widget \
---begin `scaley 27` `scalex 2` --infobox "chown news.news active.times" 0 0 --and-widget \
---begin `scaley 19` `scalex 4` --infobox ":>newsgroups" 0 0 --and-widget \
---begin `scaley 11` `scalex 12` --infobox "chown news.news newsgroups" 0 0 --and-widget \
---begin `scaley 6` `scalex 25` --infobox "popd >/dev/null" 0 0
-sleep 1
diff --git a/Build/source/utils/dialog/dialog-1.1-20080819/samples/copifuncs/ifpatch b/Build/source/utils/dialog/dialog-1.1-20080819/samples/copifuncs/ifpatch
deleted file mode 100644
index 1e7c7ee510e..00000000000
--- a/Build/source/utils/dialog/dialog-1.1-20080819/samples/copifuncs/ifpatch
+++ /dev/null
@@ -1,101 +0,0 @@
---- ifgate/message.c.orig Mon Jul 24 15:17:47 1995
-+++ ifgate/message.c Mon Jul 24 15:18:00 1995
-@@ -48,12 +48,26 @@
- if (!strcasecmp(msg->key,"X-UUCP-From")) return 0;
- if (!strcasecmp(msg->key,"X-Body-Start")) return 0;
- if (!strncasecmp(msg->key,"X-FTN-",6)) return 0;
-- if (!strcasecmp(msg->key,"Path")) return isftnpath(msg->val)?0:1;
-+ if (!strcasecmp(msg->key,"Path"))
-+
-+#ifdef LESS_RFC_KLUDGES
-+ return 0;
-+#else
-+ return isftnpath(msg->val)?0:1;
-+#endif
-+
- if (!strcasecmp(msg->key,"Newsgroups")) return newsmode?0:2;
- if (!strcasecmp(msg->key,"Xref")) return 0;
- if (!strcasecmp(msg->key,"Return-Receipt-To")) return 1;
- if (!strcasecmp(msg->key,"Received")) return newsmode?0:2;
-- if (!strcasecmp(msg->key,"From")) return ftnorigin?0:2;
-+ if (!strcasecmp(msg->key,"From"))
-+
-+#ifdef LESS_RFC_KLUDGES
-+ return 0;
-+#else
-+ return ftnorigin?0:2;
-+#endif
-+
- if (!strcasecmp(msg->key,"To"))
- {
- if (newsmode) return 0;
-@@ -66,7 +80,14 @@
- }
- if (!strcasecmp(msg->key,"Cc")) return 2;
- if (!strcasecmp(msg->key,"Bcc")) return 2;
-- if (!strcasecmp(msg->key,"Reply-To")) return 2;
-+ if (!strcasecmp(msg->key,"Reply-To"))
-+
-+#ifdef LESS_RFC_KLUDGES
-+ return 0;
-+#else
-+ return 2;
-+#endif
-+
- if (!strcasecmp(msg->key,"Lines")) return 0;
- if (!strcasecmp(msg->key,"Date")) return 0;
- if (!strcasecmp(msg->key,"Subject"))
-@@ -77,8 +98,22 @@
- if (!strcasecmp(msg->key,"Organization")) return removeorg?0:1;
- if (!strcasecmp(msg->key,"Comment-To")) return 0;
- if (!strcasecmp(msg->key,"X-Comment-To")) return 0;
-- if (!strcasecmp(msg->key,"Keywords")) return 2;
-- if (!strcasecmp(msg->key,"Summary")) return 2;
-+ if (!strcasecmp(msg->key,"Keywords"))
-+
-+#ifdef LESS_RFC_KLUDGES
-+ return 0;
-+#else
-+ return 2;
-+#endif
-+
-+ if (!strcasecmp(msg->key,"Summary"))
-+
-+#ifdef LESS_RFC_KLUDGES
-+ return 0;
-+#else
-+ return 2;
-+#endif
-+
- if (!strcasecmp(msg->key,"MIME-Version")) return removemime?0:1;
- if (!strcasecmp(msg->key,"Content-Type")) return removemime?0:1;
- if (!strcasecmp(msg->key,"Content-Length")) return removemime?0:1;
-@@ -86,8 +121,26 @@
- if (!strcasecmp(msg->key,"Content-Name")) return 2;
- if (!strcasecmp(msg->key,"Content-Description")) return 2;
- if (!strcasecmp(msg->key,"Message-ID")) return ftnorigin?0:1;
-- if (!strcasecmp(msg->key,"References")) return removeref?0:1;
-- if (!strcasecmp(msg->key,"Distribution")) return ftnorigin?0:1;
-+ if (!strcasecmp(msg->key,"References"))
-+
-+#ifdef LESS_RFC_KLUDGES
-+ return 0;
-+#else
-+ return removeref?0:1;
-+#endif
-+
-+ if (!strcasecmp(msg->key,"Distribution"))
-+
-+#ifdef LESS_RFC_KLUDGES
-+ return 0;
-+#else
-+ return ftnorigin?0:1;
-+#endif
-+
-+#ifdef LESS_RFC_KLUDGES
-+ if (!strcasecmp(msg->key,"NNTP-Posting-Host")) return 0;
-+#endif
-+
- /*if (!strcasecmp(msg->key,"")) return ;*/
- return 1;
- }