diff options
author | Karl Berry <karl@freefriends.org> | 2006-01-17 21:41:51 +0000 |
---|---|---|
committer | Karl Berry <karl@freefriends.org> | 2006-01-17 21:41:51 +0000 |
commit | 487ca4806cc046076293cf6cc5fbba0db282bac7 (patch) | |
tree | 847b412ab5158dd7bdd7ed7e5a4cc3fbca94be32 /Build/source/texk/dvipsk/vms/dvips.hlp | |
parent | a3d3111bfe26b8e5f5bc6049dfb2a4ca2edc7881 (diff) |
texk 1
git-svn-id: svn://tug.org/texlive/trunk@1485 c570f23f-e606-0410-a88d-b1316a301751
Diffstat (limited to 'Build/source/texk/dvipsk/vms/dvips.hlp')
-rw-r--r-- | Build/source/texk/dvipsk/vms/dvips.hlp | 435 |
1 files changed, 435 insertions, 0 deletions
diff --git a/Build/source/texk/dvipsk/vms/dvips.hlp b/Build/source/texk/dvipsk/vms/dvips.hlp new file mode 100644 index 00000000000..760abc3bac4 --- /dev/null +++ b/Build/source/texk/dvipsk/vms/dvips.hlp @@ -0,0 +1,435 @@ +1 DVIPS + +! Modified 07-Jul-1996 - EJG +! Fix description of filter (can write to stdout, but not read from stdin! +! Change mode description, landscape used with others just gives +! landscape. So took that out. Removed warning about quotes (not +! necessary). Added tabloid. +! Changed qualifier ctrl_d to ctrld to agree with cld file +! Changed default for inc_com to be noinc_com to agree with dvips +! Fix header qualifier +! +! Added comment about the manual to front and also under the +! special heading. + +The dvips program converts a TEX dvi file into a PostScript file for +printing or distribution. Seldom has such a seemingly easy programming +task required so much effort. The dvips program has a number of features +that set it apart from other PostScript drivers for TEX. The dvips +driver generates excellent, standard PostScript, that can be included in +other documents as figures or printed through a variety of spoolers. The +generated PostScript requires very little printer memory, so very complex +documents with a lot of fonts can easily be printed even on PostScript +printers without much memory, such as the original Apple LaserWriter. The +PostScript output is also compact, requiring less disk space to store and +making it feasible as a transfer format. Missing fonts can be automatically +generated if METAFONT exists on the system, or fonts can be converted from +gf to pk format on demand. If a font cannot be generated, a scaled +version of the same font at a different size can be used instead, although +dvips will complain loudly about the poor aesthetics of the resulting +output. + +A manual for dvips may be printed with the command: + + printps tex_root:[local]dvips.ps + +In this manual, the command line options are for the unix variant +of dvips. Our version has the qualifiers as detailed in this help +file. Also, some of the latest options are not in the manual (in +particular, the /hyperps option). + + usage: + DVIPS filename[.dvi] + +2 /COPIES + /COPIES=num + + Generate num copies of every page. Default is 1. + (For collated copies, see the /COLLATE option.) + +2 /DEBUG + /DEBUG=num + + Set the debug flags. This is intended only for + emergencies or for unusual fact-finding expeditions; it + will work only if dvips has been compiled with the + DEBUG option. Use + + num=1 for special + + num=2 for paths + + num=4 for fonts + + num=8 for pages + + num=16 for headers + + num=32 for font compression + + num=64 for files + + num=128 for memory allocation + + Use a value of -1 for maximum output. + +2 /MAXDRIFT + /MAXDRIFT=num + + Make sure that each character is placed at most this many pixels + from its `true' resolution-independent position on the page. The + default value of this parameter is resolution dependent (it is the + number of entries in the list [100, 200, 300, 400, 500, 600, 800, + 1000, 1200, 1600, 2000, 2400, 2800, 3200, : : :] that are less + than or equal to the resolution in dots per inch). Allowing + individual characters to `drift' from their correctly rounded + positions by a few pixels, while regaining the true position at + the beginning of each new word, improves the spacing of letters in + words. + +2 /FILTER + + Run as a filter writing the output to the standard output. + (The input must still be specified as the argument.) + +2 /LAST + /LAST=num + + The last page printed will be the first one numbered num. Default + is the last page in the document. + + +2 /MANUAL + + Specify manual feed for printer. + +2 /NUMBER + /NUMBER=num + At most num pages will be printed. Default is 100000. + +2 /OUTPUT + /OUTPUT=filename.ext + + The output will be sent to file name. If no file name is given, + the default name is file.ps where the dvi file was called + file.dvi . + +2 /START + /START=num + + The first page printed will be the first one numbered + num. Default is the first page in the document. + +2 /QUIET + + Run in quiet mode. Don't chatter about pages converted, + etc.; report nothing but errors to standard error. + +2 /REVERSE + + Stack pages in reverse order. Normally, page 1 will be printed + first. + +2 /SAV_RES + + Causes the entire global output to be enclosed in a save/restore + pair. This causes the file to not be truly conformant, and is + thus not recommended, but is useful if you are driving the printer + directly and don't care too much about the portability of the + output. + +2 /MODE + /MODE=modename + + This sets the paper mode to modename. Currently, the only modes + allowable are + + "letter", which selects an 8.5 by 11 inch page, + "a3", which selects an a3 sized page, + "a4" , which selects an a4 sized page, + "legal", which selects an 8.5 by 14 inch page, + "ledger", which selects an 11 by 17 inch page, and + "tabloid", which selects a 17 by 11 inch page, and + "landscape", which rotates a letter size document by 90 degrees. + + + The default mode is "letter". The upper left corner of each page in + the dvi file is placed one inch from the left and one inch from the top. + +2 /MAGNIFICATION + /MAGNIFICATION=num + + Set the magnification ratio to num/1000. Overrides the + magnification specified in the dvi file. Must be between 10 and + 100000. + +2 /COLLATE + /COLLATE=num + + Create num copies, but collated (by replicating the data in the + PostScript file). Slower than the /COPIES option, but easier on + the hands, and faster than resubmitting the same PostScript file + multiple times. + +2 /DPI + /DPI=num + + Set the resolution in dpi (dots per inch) to num. This + affects the choice of bitmap fonts that are loaded and also the + positioning of letters in resident PostScript fonts. Must be + between 10 and 10000. This affects both the horizontal and + vertical resolution. If a high resolution (something greater than + 400 dpi, say) is selected, the /COMPRESS flag should probably also + be used. + +2 /CTRLD + + Causes Control-D (ASCII code 4) to be appended as the + very last character of the PostScript file. This is useful + when dvips is driving the printer directly instead of working + through a spooler, as is common on extremely small systems. + Otherwise, it is not recommended. + +2 /INC_COM + /INC_COM + /NOINC_COM (default) + + /NOINC_COM option causes comments in included PostScript graphics, + font files, and headers to be removed. This is sometimes + necessary to get around bugs in spoolers or PostScript + post-processing programs. Specifically, the %%Page comments, + when left in, often cause difficulties. Use of this flag can + cause some included graphics to fail, since the PostScript header + macros from some software packages read portions of the + input stream line by line, searching for a particular comment. + +2 /COMMENT + /COMMENT (default) + /NOCOMMENT + + /NOCOMMENT turns off structured comments; this might be necessary + on some systems that try to interpret PostScript comments in weird + ways, or on some PostScript printers. Old versions of Transcript + in particular cannot handle modern Encapsulated PostScript. + +2 /PRINTER + /PRINTER=printername + + Sets up the output for the appropriate printer. This is + implemented by reading in config.printername , which can set + various parameters such as the font paths and any other defaults + for that printer only. It is recommended that all standard + defaults go in the one master config.ps file and only things that + vary printer to printer go in the config.printername files. Note + that config.ps is read before config.printername. In + addition, another file called "/.dvipsrc is searched for + immediately after config.ps; this file is intended for user + defaults. If no /PRINTER command is given, the environment + variable PRINTER is checked. If that variable exists, and a + corresponding configuration file exists, that configuration file + is read in. + +2 /HEADER + /HEADER=(file1,file2,...) + /NOHEADER + + Prepend file1, file2, ... as additional header files. + This header file gets added to the PostScript userdict. + With /NOHEADER, suppress all header output. + + +2 /VM_SAVE + /VM_SAVE (default) + /NOVM_SAVE + + /NOVM_SAVE disables a PostScript virtual memory saving + optimization that stores the character metric information in the + same string that is used to store the bitmap information. This + is only necessary when driving the Xerox 4045 PostScript + interpreter, and it is caused by a bug in that interpreter that + results in `garbage' on the bottom of each character. Not + recommended unless you must drive this printer. + +2 /H_DPI + /H_DPI=num + + Set the horizontal resolution in dots per inch to num. + + +2 /V_DPI + /V_DPI=num + + Set the vertical resolution in dots per inch to num. + +2 /COMPRESS + + Causes bitmapped fonts to be compressed before they are + downloaded, thereby reducing the size of the PostScript + font-downloading information. Especially useful at high + resolutions or when very large fonts are used. Will slow down + printing somewhat, especially on early 68000-based PostScript + printers. + +2 /ABSOLUTE + + Makes references to page numbers absolute (rather than TeX + page numbers). + +2 /EPSF + /EPSF + /NOEPSF (default) + + /EPSF makes dvips attempt to generate an EPSF file with a + tight bounding box. This only works on one-page files, and it + only looks at marks made by characters and rules, not by any + included graphics. In addition, it gets the glyph metrics + from the tfm file, so characters that lie outside their + enclosing tfm box may confuse it. In addition, the bounding + box might be a bit too loose if the character glyph has + significant left or right side bearings. Nonetheless, this + option works well for creating small EPSF files for equations + or tables or the like. (Note, of course, that dvips output is + resolution dependent and thus does not make very good EPSF + files, especially if the images are to be scaled; use these + EPSF files with a great deal of care.) + + +2 /PRESCAN + /PRESCAN + /NOPRESCAN (default) + + Conserve memory by making three passes over the .dvi file + instead of two and only loading those characters actually + used. Generally only useful on machines with a very limited + amount of memory, like some PCs. + +2 /PAGECOPIES + /PAGECOPIES=num (default=1) + + Number of times to print each page. Executes the postscript + for each page this number of times (unlike /COPIES which + executes the postscript once and prints multiple times.) + +2 /SEPARATE + /SEPARATE + /NOSEPARATE (default) + + Make each section be a separate file. Under certain + circumstances, dvips will split the document up into + `sections' to be processed independently; this is most often + done for memory reasons. Using this option tells dvips to + place each section into a separate file; the new file names + are created replacing the suffix of the supplied output file + name by a three-digit sequence number. This option is most + often used in conjunction with the /SEC_SIZE option which + sets the maximum section length in pages. For instance, some + phototypesetters cannot print more than ten or so consecutive + pages before running out of steam; these options can be used + to automatically split a book into ten-page sections, each to + its own file. + +2 /CROPMARKS + /CROPMARKS + /NOCROPMARKS (default) + + Print crop marks. This option increases the paper size + (which should be specified, either with a paper size special + or with the /PSIZE option) by a half inch in each dimension. + It translates each page by a quarter inch and draws + cross-style crop marks. It is mostly useful with typesetters + that can set the page size automatically. + + +2 /SEC_SIZE + /SEC_SIZE=number + + Set the maximum number of pages in each `section'. This + option is most commonly used with the /SEPARATE option; see + that documentation above for more information. + + +2 /HELP + /HELP + + Given with a dummy file name, causes dvips to output a one + page listing of options in unix form. Not very useful! + + + +2 /MAKEFONT + /MAKEFONT (default) + /NOMAKEFONT + + The /NOMAKEFONT option turns off the automatic font + generation facility. If any fonts are missing, commands to + generate the fonts are appended to the file missfont.log in + the current directory; this file can then be executed and + deleted to create the missing fonts. + +2 /PSIZE + /PSIZE="dim,dim" + + Set the paper size to the given pair of dimensions. This + option takes its arguments in the same syntax as the + papersize special, for example 8.5in,11in. It overrides any + paper size special in the dvi file. The dimensions must + resolve to a papersize specified in the configuration files. + + +2 /POFFSET + /POFFSET="dim,dim" + + Move the origin by a certain amount. The offset is a + comma-separated pair of dimensions, such as .1in,-.3cm (in + the same syntax used in the papersize special). The origin + of the page is shifted from the default position (of one inch + down, one inch to the right from the upper left corner of the + paper) by this amount. + + +2 /SECURE + /SECURE + /NOSECURE (default) + + With the /SECURE option, dvips will not attempt to open pipes + or run commands (such as commands to make fonts). + +2 /ODDPAGES + /ODDPAGES + /NOODDPAGES (default) + + Print only odd pages (TeX pages, not sequence pages). + +2 /EVENPAGES + /EVENPAGES + /NOEVENPAGES (default) + + Print only even pages (TeX pages, not sequence pages). + +2 /DOWNLOADPS + /DOWNLOADPS + /NODOWNLOADPS (default) + + Downloadable postscript fonts are set in PK (compressed + bitmap) format. + +2 /HYPERPS + /HYPERPS + /NOHYPERPS (default) + + Outputs \specials containing hyperlinks to the output file as + pdf marks embedded in postscript comments. These can then be + turned into hyperlinks with Adobe Distiller and viewed with + Adobe Acrobat. + +2 Specials + + The specials are described in the manual which may be printed + with the command + + printps tex_root:[local]dvips.ps + + In this manual, the command line options are for the unix + variant of dvips. Our version has the qualifiers as detailed + in this help file. Also, some of the latest options are not + in the manual (in particular, the /hyperps option). |