another attempt at libtool-2.4.7

git-svn-id: svn://tug.org/texlive/trunk@66289 c570f23f-e606-0410-a88d-b1316a301751

3 files changed, 496 insertions, 95 deletions

diff --git a/Build/source/texk/dvipos/Makefile.in b/Build/source/texk/dvipos/Makefile.in
index 3d87eeb880f..1b65cc29e46 100644
--- a/Build/source/texk/dvipos/Makefile.in
+++ b/Build/source/texk/dvipos/Makefile.in
@@ -390,7 +390,8 @@ am__set_b = \
       b='$*';; \
   esac
 am__DIST_COMMON = $(dist_man1_MANS) $(srcdir)/Makefile.in \
-	$(srcdir)/config.h.in $(top_srcdir)/../../build-aux/compile \
+	$(srcdir)/config.h.in $(top_srcdir)/../../build-aux/ar-lib \
+	$(top_srcdir)/../../build-aux/compile \
 	$(top_srcdir)/../../build-aux/config.guess \
 	$(top_srcdir)/../../build-aux/config.sub \
 	$(top_srcdir)/../../build-aux/depcomp \
@@ -450,6 +451,7 @@ EGREP = @EGREP@
 ETAGS = @ETAGS@
 EXEEXT = @EXEEXT@
 FGREP = @FGREP@
+FILECMD = @FILECMD@
 GREP = @GREP@
 INSTALL = @INSTALL@
 INSTALL_DATA = @INSTALL_DATA@
diff --git a/Build/source/texk/dvipos/aclocal.m4 b/Build/source/texk/dvipos/aclocal.m4
index 79219dbd458..7201f3a401b 100644
--- a/Build/source/texk/dvipos/aclocal.m4
+++ b/Build/source/texk/dvipos/aclocal.m4
@@ -56,6 +56,66 @@ m4_ifndef([AC_AUTOCONF_VERSION],
   [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
 _AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
 
+# Copyright (C) 2011-2021 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_AR([ACT-IF-FAIL])
+# -------------------------
+# Try to determine the archiver interface, and trigger the ar-lib wrapper
+# if it is needed.  If the detection of archiver interface fails, run
+# ACT-IF-FAIL (default is to abort configure with a proper error message).
+AC_DEFUN([AM_PROG_AR],
+[AC_BEFORE([$0], [LT_INIT])dnl
+AC_BEFORE([$0], [AC_PROG_LIBTOOL])dnl
+AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+AC_REQUIRE_AUX_FILE([ar-lib])dnl
+AC_CHECK_TOOLS([AR], [ar lib "link -lib"], [false])
+: ${AR=ar}
+
+AC_CACHE_CHECK([the archiver ($AR) interface], [am_cv_ar_interface],
+  [AC_LANG_PUSH([C])
+   am_cv_ar_interface=ar
+   AC_COMPILE_IFELSE([AC_LANG_SOURCE([[int some_variable = 0;]])],
+     [am_ar_try='$AR cru libconftest.a conftest.$ac_objext >&AS_MESSAGE_LOG_FD'
+      AC_TRY_EVAL([am_ar_try])
+      if test "$ac_status" -eq 0; then
+        am_cv_ar_interface=ar
+      else
+        am_ar_try='$AR -NOLOGO -OUT:conftest.lib conftest.$ac_objext >&AS_MESSAGE_LOG_FD'
+        AC_TRY_EVAL([am_ar_try])
+        if test "$ac_status" -eq 0; then
+          am_cv_ar_interface=lib
+        else
+          am_cv_ar_interface=unknown
+        fi
+      fi
+      rm -f conftest.lib libconftest.a
+     ])
+   AC_LANG_POP([C])])
+
+case $am_cv_ar_interface in
+ar)
+  ;;
+lib)
+  # Microsoft lib, so override with the ar-lib wrapper script.
+  # FIXME: It is wrong to rewrite AR.
+  # But if we don't then we get into trouble of one sort or another.
+  # A longer-term fix would be to have automake use am__AR in this case,
+  # and then we could set am__AR="$am_aux_dir/ar-lib \$(AR)" or something
+  # similar.
+  AR="$am_aux_dir/ar-lib $AR"
+  ;;
+unknown)
+  m4_default([$1],
+             [AC_MSG_ERROR([could not determine $AR interface])])
+  ;;
+esac
+AC_SUBST([AR])dnl
+])
+
 # AM_AUX_DIR_EXPAND                                         -*- Autoconf -*-
 
 # Copyright (C) 2001-2021 Free Software Foundation, Inc.
diff --git a/Build/source/texk/dvipos/configure b/Build/source/texk/dvipos/configure
index 5fecfaeb11d..3fcfee0d5bf 100755
--- a/Build/source/texk/dvipos/configure
+++ b/Build/source/texk/dvipos/configure
@@ -686,6 +686,7 @@ MANIFEST_TOOL
 RANLIB
 ac_ct_AR
 AR
+FILECMD
 LN_S
 NM
 ac_ct_DUMPBIN
@@ -2677,7 +2678,7 @@ as_fn_append ac_header_c_list " sys/types.h sys_types_h HAVE_SYS_TYPES_H"
 as_fn_append ac_header_c_list " unistd.h unistd_h HAVE_UNISTD_H"
 
 # Auxiliary files required by this configure script.
-ac_aux_files="config.guess config.sub ltmain.sh compile missing install-sh"
+ac_aux_files="ar-lib config.guess config.sub ltmain.sh compile missing install-sh"
 
 # Locations in which to look for auxiliary files.
 ac_aux_dir_candidates="${srcdir}/../../build-aux"
@@ -4614,8 +4615,8 @@ esac
 
 
 
-macro_version='2.4.6'
-macro_revision='2.4.6'
+macro_version='2.4.7'
+macro_revision='2.4.7'
 
 
 
@@ -5243,13 +5244,13 @@ else
 	mingw*) lt_bad_file=conftest.nm/nofile ;;
 	*) lt_bad_file=/dev/null ;;
 	esac
-	case `"$tmp_nm" -B $lt_bad_file 2>&1 | sed '1q'` in
+	case `"$tmp_nm" -B $lt_bad_file 2>&1 | $SED '1q'` in
 	*$lt_bad_file* | *'Invalid file or object type'*)
 	  lt_cv_path_NM="$tmp_nm -B"
 	  break 2
 	  ;;
 	*)
-	  case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
+	  case `"$tmp_nm" -p /dev/null 2>&1 | $SED '1q'` in
 	  */dev/null*)
 	    lt_cv_path_NM="$tmp_nm -p"
 	    break 2
@@ -5387,7 +5388,7 @@ esac
   fi
 fi
 
-    case `$DUMPBIN -symbols -headers /dev/null 2>&1 | sed '1q'` in
+    case `$DUMPBIN -symbols -headers /dev/null 2>&1 | $SED '1q'` in
     *COFF*)
       DUMPBIN="$DUMPBIN -symbols -headers"
       ;;
@@ -5491,7 +5492,7 @@ else $as_nop
     lt_cv_sys_max_cmd_len=8192;
     ;;
 
-  bitrig* | darwin* | dragonfly* | freebsd* | netbsd* | openbsd*)
+  bitrig* | darwin* | dragonfly* | freebsd* | midnightbsd* | netbsd* | openbsd*)
     # This has been around since 386BSD, at least.  Likely further.
     if test -x /sbin/sysctl; then
       lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
@@ -5534,7 +5535,7 @@ else $as_nop
   sysv5* | sco5v6* | sysv4.2uw2*)
     kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
     if test -n "$kargmax"; then
-      lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[	 ]//'`
+      lt_cv_sys_max_cmd_len=`echo $kargmax | $SED 's/.*[	 ]//'`
     else
       lt_cv_sys_max_cmd_len=32768
     fi
@@ -5740,6 +5741,114 @@ esac
 
 
 if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}file", so it can be a program name with args.
+set dummy ${ac_tool_prefix}file; ac_word=$2
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+printf %s "checking for $ac_word... " >&6; }
+if test ${ac_cv_prog_FILECMD+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  if test -n "$FILECMD"; then
+  ac_cv_prog_FILECMD="$FILECMD" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  case $as_dir in #(((
+    '') as_dir=./ ;;
+    */) ;;
+    *) as_dir=$as_dir/ ;;
+  esac
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then
+    ac_cv_prog_FILECMD="${ac_tool_prefix}file"
+    printf "%s\n" "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+FILECMD=$ac_cv_prog_FILECMD
+if test -n "$FILECMD"; then
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $FILECMD" >&5
+printf "%s\n" "$FILECMD" >&6; }
+else
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
+printf "%s\n" "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_FILECMD"; then
+  ac_ct_FILECMD=$FILECMD
+  # Extract the first word of "file", so it can be a program name with args.
+set dummy file; ac_word=$2
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+printf %s "checking for $ac_word... " >&6; }
+if test ${ac_cv_prog_ac_ct_FILECMD+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  if test -n "$ac_ct_FILECMD"; then
+  ac_cv_prog_ac_ct_FILECMD="$ac_ct_FILECMD" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  case $as_dir in #(((
+    '') as_dir=./ ;;
+    */) ;;
+    *) as_dir=$as_dir/ ;;
+  esac
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_FILECMD="file"
+    printf "%s\n" "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_FILECMD=$ac_cv_prog_ac_ct_FILECMD
+if test -n "$ac_ct_FILECMD"; then
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_ct_FILECMD" >&5
+printf "%s\n" "$ac_ct_FILECMD" >&6; }
+else
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
+printf "%s\n" "no" >&6; }
+fi
+
+  if test "x$ac_ct_FILECMD" = x; then
+    FILECMD=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+printf "%s\n" "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    FILECMD=$ac_ct_FILECMD
+  fi
+else
+  FILECMD="$ac_cv_prog_FILECMD"
+fi
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
 set dummy ${ac_tool_prefix}objdump; ac_word=$2
 { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
@@ -5879,7 +5988,7 @@ beos*)
 
 bsdi[45]*)
   lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
+  lt_cv_file_magic_cmd='$FILECMD -L'
   lt_cv_file_magic_test_file=/shlib/libc.so
   ;;
 
@@ -5913,14 +6022,14 @@ darwin* | rhapsody*)
   lt_cv_deplibs_check_method=pass_all
   ;;
 
-freebsd* | dragonfly*)
+freebsd* | dragonfly* | midnightbsd*)
   if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
     case $host_cpu in
     i*86 )
       # Not sure whether the presence of OpenBSD here was a mistake.
       # Let's accept both of them until this is cleared up.
       lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library'
-      lt_cv_file_magic_cmd=/usr/bin/file
+      lt_cv_file_magic_cmd=$FILECMD
       lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
       ;;
     esac
@@ -5934,7 +6043,7 @@ haiku*)
   ;;
 
 hpux10.20* | hpux11*)
-  lt_cv_file_magic_cmd=/usr/bin/file
+  lt_cv_file_magic_cmd=$FILECMD
   case $host_cpu in
   ia64*)
     lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
@@ -5981,7 +6090,7 @@ netbsd*)
 
 newos6*)
   lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
-  lt_cv_file_magic_cmd=/usr/bin/file
+  lt_cv_file_magic_cmd=$FILECMD
   lt_cv_file_magic_test_file=/usr/lib/libnls.so
   ;;
 
@@ -6351,13 +6460,29 @@ esac
 fi
 
 : ${AR=ar}
-: ${AR_FLAGS=cru}
 
 
 
 
 
 
+# Use ARFLAGS variable as AR's operation code to sync the variable naming with
+# Automake.  If both AR_FLAGS and ARFLAGS are specified, AR_FLAGS should have
+# higher priority because thats what people were doing historically (setting
+# ARFLAGS for automake and AR_FLAGS for libtool).  FIXME: Make the AR_FLAGS
+# variable obsoleted/removed.
+
+test ${AR_FLAGS+y} || AR_FLAGS=${ARFLAGS-cr}
+lt_ar_flags=$AR_FLAGS
+
+
+
+
+
+
+# Make AR_FLAGS overridable by 'make ARFLAGS='.  Don't try to run-time override
+# by AR_FLAGS because that was never working and AR_FLAGS is about to die.
+
 
 
 
@@ -6774,7 +6899,7 @@ esac
 
 if test "$lt_cv_nm_interface" = "MS dumpbin"; then
   # Gets list of data symbols to import.
-  lt_cv_sys_global_symbol_to_import="sed -n -e 's/^I .* \(.*\)$/\1/p'"
+  lt_cv_sys_global_symbol_to_import="$SED -n -e 's/^I .* \(.*\)$/\1/p'"
   # Adjust the below global symbol transforms to fixup imported variables.
   lt_cdecl_hook=" -e 's/^I .* \(.*\)$/extern __declspec(dllimport) char \1;/p'"
   lt_c_name_hook=" -e 's/^I .* \(.*\)$/  {\"\1\", (void *) 0},/p'"
@@ -6792,20 +6917,20 @@ fi
 # Transform an extracted symbol line into a proper C declaration.
 # Some systems (esp. on ia64) link data and code symbols differently,
 # so use this general approach.
-lt_cv_sys_global_symbol_to_cdecl="sed -n"\
+lt_cv_sys_global_symbol_to_cdecl="$SED -n"\
 $lt_cdecl_hook\
 " -e 's/^T .* \(.*\)$/extern int \1();/p'"\
 " -e 's/^$symcode$symcode* .* \(.*\)$/extern char \1;/p'"
 
 # Transform an extracted symbol line into symbol name and symbol address
-lt_cv_sys_global_symbol_to_c_name_address="sed -n"\
+lt_cv_sys_global_symbol_to_c_name_address="$SED -n"\
 $lt_c_name_hook\
 " -e 's/^: \(.*\) .*$/  {\"\1\", (void *) 0},/p'"\
 " -e 's/^$symcode$symcode* .* \(.*\)$/  {\"\1\", (void *) \&\1},/p'"
 
 # Transform an extracted symbol line into symbol name with lib prefix and
 # symbol address.
-lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n"\
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="$SED -n"\
 $lt_c_name_lib_hook\
 " -e 's/^: \(.*\) .*$/  {\"\1\", (void *) 0},/p'"\
 " -e 's/^$symcode$symcode* .* \(lib.*\)$/  {\"\1\", (void *) \&\1},/p'"\
@@ -6829,7 +6954,7 @@ for ac_symprfx in "" "_"; do
   if test "$lt_cv_nm_interface" = "MS dumpbin"; then
     # Fake it for dumpbin and say T for any non-static function,
     # D for any global variable and I for any imported variable.
-    # Also find C++ and __fastcall symbols from MSVC++,
+    # Also find C++ and __fastcall symbols from MSVC++ or ICC,
     # which start with @ or ?.
     lt_cv_sys_global_symbol_pipe="$AWK '"\
 "     {last_section=section; section=\$ 3};"\
@@ -6847,9 +6972,9 @@ for ac_symprfx in "" "_"; do
 "     s[1]~prfx {split(s[1],t,\"@\"); print f,t[1],substr(t[1],length(prfx))}"\
 "     ' prfx=^$ac_symprfx"
   else
-    lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[	 ]\($symcode$symcode*\)[	 ][	 ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+    lt_cv_sys_global_symbol_pipe="$SED -n -e 's/^.*[	 ]\($symcode$symcode*\)[	 ][	 ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
   fi
-  lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'"
+  lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | $SED '/ __gnu_lto/d'"
 
   # Check to see that the pipe works correctly.
   pipe_works=no
@@ -7052,7 +7177,7 @@ case $with_sysroot in #(
    fi
    ;; #(
  /*)
-   lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"`
+   lt_sysroot=`echo "$with_sysroot" | $SED -e "$sed_quote_subst"`
    ;; #(
  no|'')
    ;; #(
@@ -7177,7 +7302,7 @@ ia64-*-hpux*)
   ac_status=$?
   printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
   test $ac_status = 0; }; then
-    case `/usr/bin/file conftest.$ac_objext` in
+    case `$FILECMD conftest.$ac_objext` in
       *ELF-32*)
 	HPUX_IA64_MODE=32
 	;;
@@ -7198,7 +7323,7 @@ ia64-*-hpux*)
   printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
   test $ac_status = 0; }; then
     if test yes = "$lt_cv_prog_gnu_ld"; then
-      case `/usr/bin/file conftest.$ac_objext` in
+      case `$FILECMD conftest.$ac_objext` in
 	*32-bit*)
 	  LD="${LD-ld} -melf32bsmip"
 	  ;;
@@ -7210,7 +7335,7 @@ ia64-*-hpux*)
 	;;
       esac
     else
-      case `/usr/bin/file conftest.$ac_objext` in
+      case `$FILECMD conftest.$ac_objext` in
 	*32-bit*)
 	  LD="${LD-ld} -32"
 	  ;;
@@ -7236,7 +7361,7 @@ mips64*-*linux*)
   printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
   test $ac_status = 0; }; then
     emul=elf
-    case `/usr/bin/file conftest.$ac_objext` in
+    case `$FILECMD conftest.$ac_objext` in
       *32-bit*)
 	emul="${emul}32"
 	;;
@@ -7244,7 +7369,7 @@ mips64*-*linux*)
 	emul="${emul}64"
 	;;
     esac
-    case `/usr/bin/file conftest.$ac_objext` in
+    case `$FILECMD conftest.$ac_objext` in
       *MSB*)
 	emul="${emul}btsmip"
 	;;
@@ -7252,7 +7377,7 @@ mips64*-*linux*)
 	emul="${emul}ltsmip"
 	;;
     esac
-    case `/usr/bin/file conftest.$ac_objext` in
+    case `$FILECMD conftest.$ac_objext` in
       *N32*)
 	emul="${emul}n32"
 	;;
@@ -7276,14 +7401,14 @@ s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
   ac_status=$?
   printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
   test $ac_status = 0; }; then
-    case `/usr/bin/file conftest.o` in
+    case `$FILECMD conftest.o` in
       *32-bit*)
 	case $host in
 	  x86_64-*kfreebsd*-gnu)
 	    LD="${LD-ld} -m elf_i386_fbsd"
 	    ;;
 	  x86_64-*linux*)
-	    case `/usr/bin/file conftest.o` in
+	    case `$FILECMD conftest.o` in
 	      *x86-64*)
 		LD="${LD-ld} -m elf32_x86_64"
 		;;
@@ -7391,7 +7516,7 @@ printf "%s\n" "$lt_cv_cc_needs_belf" >&6; }
   ac_status=$?
   printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
   test $ac_status = 0; }; then
-    case `/usr/bin/file conftest.o` in
+    case `$FILECMD conftest.o` in
     *64-bit*)
       case $lt_cv_prog_gnu_ld in
       yes*)
@@ -8174,8 +8299,8 @@ int forced_loaded() { return 2;}
 _LT_EOF
       echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&5
       $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5
-      echo "$AR cru libconftest.a conftest.o" >&5
-      $AR cru libconftest.a conftest.o 2>&5
+      echo "$AR $AR_FLAGS libconftest.a conftest.o" >&5
+      $AR $AR_FLAGS libconftest.a conftest.o 2>&5
       echo "$RANLIB libconftest.a" >&5
       $RANLIB libconftest.a 2>&5
       cat > conftest.c << _LT_EOF
@@ -8202,17 +8327,12 @@ printf "%s\n" "$lt_cv_ld_force_load" >&6; }
       _lt_dar_allow_undefined='$wl-undefined ${wl}suppress' ;;
     darwin1.*)
       _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;;
-    darwin*) # darwin 5.x on
-      # if running on 10.5 or later, the deployment target defaults
-      # to the OS version, if on x86, and 10.4, the deployment
-      # target defaults to 10.4. Don't you love it?
-      case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
-	10.0,*86*-darwin8*|10.0,*-darwin[91]*)
-	  _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;;
-	10.[012][,.]*)
-	  _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;;
-	10.*)
-	  _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;;
+    darwin*)
+      case $MACOSX_DEPLOYMENT_TARGET,$host in
+        10.[012],*|,*powerpc*-darwin[5-8]*)
+          _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;;
+        *)
+          _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;;
       esac
     ;;
   esac
@@ -9248,8 +9368,8 @@ esac
 ofile=libtool
 can_build_shared=yes
 
-# All known linkers require a '.a' archive for static linking (except MSVC,
-# which needs '.lib').
+# All known linkers require a '.a' archive for static linking (except MSVC and
+# ICC, which need '.lib').
 libext=a
 
 with_gnu_ld=$lt_cv_prog_gnu_ld
@@ -9761,7 +9881,7 @@ lt_prog_compiler_static=
 	lt_prog_compiler_static='-qstaticlink'
 	;;
       *)
-	case `$CC -V 2>&1 | sed 5q` in
+	case `$CC -V 2>&1 | $SED 5q` in
 	*Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [1-7].* | *Sun*Fortran*\ 8.[0-3]*)
 	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
 	  lt_prog_compiler_pic='-KPIC'
@@ -10184,15 +10304,15 @@ printf %s "checking whether the $compiler linker ($LD) supports shared libraries
 
   case $host_os in
   cygwin* | mingw* | pw32* | cegcc*)
-    # FIXME: the MSVC++ port hasn't been tested in a loooong time
+    # FIXME: the MSVC++ and ICC port hasn't been tested in a loooong time
     # When not using gcc, we currently assume that we are using
-    # Microsoft Visual C++.
+    # Microsoft Visual C++ or Intel C++ Compiler.
     if test yes != "$GCC"; then
       with_gnu_ld=no
     fi
     ;;
   interix*)
-    # we just hope/assume this is gcc and not c89 (= MSVC++)
+    # we just hope/assume this is gcc and not c89 (= MSVC++ or ICC)
     with_gnu_ld=yes
     ;;
   openbsd* | bitrig*)
@@ -10244,7 +10364,7 @@ printf %s "checking whether the $compiler linker ($LD) supports shared libraries
       whole_archive_flag_spec=
     fi
     supports_anon_versioning=no
-    case `$LD -v | $SED -e 's/(^)\+)\s\+//' 2>&1` in
+    case `$LD -v | $SED -e 's/([^)]\+)\s\+//' 2>&1` in
       *GNU\ gold*) supports_anon_versioning=yes ;;
       *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
       *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
@@ -10356,6 +10476,7 @@ _LT_EOF
 	emximp -o $lib $output_objdir/$libname.def'
       old_archive_From_new_cmds='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
       enable_shared_with_static_runtimes=yes
+      file_list_spec='@'
       ;;
 
     interix[3-9]*)
@@ -10370,7 +10491,7 @@ _LT_EOF
       # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
       # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
       archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-      archive_expsym_cmds='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      archive_expsym_cmds='$SED "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
       ;;
 
     gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
@@ -10413,7 +10534,7 @@ _LT_EOF
 	  compiler_needs_object=yes
 	  ;;
 	esac
-	case `$CC -V 2>&1 | sed 5q` in
+	case `$CC -V 2>&1 | $SED 5q` in
 	*Sun\ C*)			# Sun C 5.9
 	  whole_archive_flag_spec='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
 	  compiler_needs_object=yes
@@ -10425,7 +10546,7 @@ _LT_EOF
 
         if test yes = "$supports_anon_versioning"; then
           archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
-            cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+            cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
             echo "local: *; };" >> $output_objdir/$libname.ver~
             $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib'
         fi
@@ -10441,7 +10562,7 @@ _LT_EOF
 	  archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
 	  if test yes = "$supports_anon_versioning"; then
 	    archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
-              cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+              cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
               echo "local: *; };" >> $output_objdir/$libname.ver~
               $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
 	  fi
@@ -10573,7 +10694,7 @@ _LT_EOF
 	if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
 	  export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols'
 	else
-	  export_symbols_cmds='`func_echo_all $NM | $SED -e '\''s/B\([^B]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && (substr(\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols'
+	  export_symbols_cmds='`func_echo_all $NM | $SED -e '\''s/B\([^B]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "L") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && (substr(\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols'
 	fi
 	aix_use_runtimelinking=no
 
@@ -10844,12 +10965,12 @@ fi
 
     cygwin* | mingw* | pw32* | cegcc*)
       # When not using gcc, we currently assume that we are using
-      # Microsoft Visual C++.
+      # Microsoft Visual C++ or Intel C++ Compiler.
       # hardcode_libdir_flag_spec is actually meaningless, as there is
       # no search path for DLLs.
       case $cc_basename in
-      cl*)
-	# Native MSVC
+      cl* | icl*)
+	# Native MSVC or ICC
 	hardcode_libdir_flag_spec=' '
 	allow_undefined_flag=unsupported
 	always_export_symbols=yes
@@ -10890,7 +11011,7 @@ fi
           fi'
 	;;
       *)
-	# Assume MSVC wrapper
+	# Assume MSVC and ICC wrapper
 	hardcode_libdir_flag_spec=' '
 	allow_undefined_flag=unsupported
 	# Tell ltmain to make .lib files, not .a files.
@@ -10931,8 +11052,8 @@ fi
     output_verbose_link_cmd=func_echo_all
     archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dsymutil"
     module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dsymutil"
-    archive_expsym_cmds="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dar_export_syms$_lt_dsymutil"
-    module_expsym_cmds="sed -e 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dar_export_syms$_lt_dsymutil"
+    archive_expsym_cmds="$SED 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dar_export_syms$_lt_dsymutil"
+    module_expsym_cmds="$SED -e 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dar_export_syms$_lt_dsymutil"
 
   else
   ld_shlibs=no
@@ -10966,7 +11087,7 @@ fi
       ;;
 
     # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
-    freebsd* | dragonfly*)
+    freebsd* | dragonfly* | midnightbsd*)
       archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
       hardcode_libdir_flag_spec='-R$libdir'
       hardcode_direct=yes
@@ -11217,6 +11338,7 @@ printf "%s\n" "$lt_cv_irix_exported_symbol" >&6; }
 	emximp -o $lib $output_objdir/$libname.def'
       old_archive_From_new_cmds='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
       enable_shared_with_static_runtimes=yes
+      file_list_spec='@'
       ;;
 
     osf3*)
@@ -11909,7 +12031,7 @@ cygwin* | mingw* | pw32* | cegcc*)
     case $host_os in
     cygwin*)
       # Cygwin DLLs use 'cyg' prefix rather than 'lib'
-      soname_spec='`echo $libname | sed -e 's/^lib/cyg/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
+      soname_spec='`echo $libname | $SED -e 's/^lib/cyg/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
 
       sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"
       ;;
@@ -11919,14 +12041,14 @@ cygwin* | mingw* | pw32* | cegcc*)
       ;;
     pw32*)
       # pw32 DLLs use 'pw' prefix rather than 'lib'
-      library_names_spec='`echo $libname | sed -e 's/^lib/pw/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
+      library_names_spec='`echo $libname | $SED -e 's/^lib/pw/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
       ;;
     esac
     dynamic_linker='Win32 ld.exe'
     ;;
 
-  *,cl*)
-    # Native MSVC
+  *,cl* | *,icl*)
+    # Native MSVC or ICC
     libname_spec='$name'
     soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
     library_names_spec='$libname.dll.lib'
@@ -11945,7 +12067,7 @@ cygwin* | mingw* | pw32* | cegcc*)
       done
       IFS=$lt_save_ifs
       # Convert to MSYS style.
-      sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'`
+      sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'`
       ;;
     cygwin*)
       # Convert to unix form, then to dos form, then back to unix form
@@ -11982,7 +12104,7 @@ cygwin* | mingw* | pw32* | cegcc*)
     ;;
 
   *)
-    # Assume MSVC wrapper
+    # Assume MSVC and ICC wrapper
     library_names_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext $libname.lib'
     dynamic_linker='Win32 ld.exe'
     ;;
@@ -12015,7 +12137,7 @@ dgux*)
   shlibpath_var=LD_LIBRARY_PATH
   ;;
 
-freebsd* | dragonfly*)
+freebsd* | dragonfly* | midnightbsd*)
   # DragonFly does not have aout.  When/if they implement a new
   # versioning mechanism, adjust this.
   if test -x /usr/bin/objformat; then
@@ -13168,30 +13290,41 @@ striplib=
 old_striplib=
 { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking whether stripping libraries is possible" >&5
 printf %s "checking whether stripping libraries is possible... " >&6; }
-if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
-  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
-  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
-  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-printf "%s\n" "yes" >&6; }
+if test -z "$STRIP"; then
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
+printf "%s\n" "no" >&6; }
 else
-# FIXME - insert some real tests, host_os isn't really good enough
-  case $host_os in
-  darwin*)
-    if test -n "$STRIP"; then
+  if $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
+    old_striplib="$STRIP --strip-debug"
+    striplib="$STRIP --strip-unneeded"
+    { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+printf "%s\n" "yes" >&6; }
+  else
+    case $host_os in
+    darwin*)
+      # FIXME - insert some real tests, host_os isn't really good enough
       striplib="$STRIP -x"
       old_striplib="$STRIP -S"
       { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: yes" >&5
 printf "%s\n" "yes" >&6; }
-    else
-      { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
+      ;;
+    freebsd*)
+      if $STRIP -V 2>&1 | $GREP "elftoolchain" >/dev/null; then
+        old_striplib="$STRIP --strip-debug"
+        striplib="$STRIP --strip-unneeded"
+        { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+printf "%s\n" "yes" >&6; }
+      else
+        { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
 printf "%s\n" "no" >&6; }
-    fi
-    ;;
-  *)
-    { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
+      fi
+      ;;
+    *)
+      { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
 printf "%s\n" "no" >&6; }
-    ;;
-  esac
+      ;;
+    esac
+  fi
 fi
 
 
@@ -14181,7 +14314,7 @@ kpse_save_LIBS=$LIBS
 kpse_BLD=`(cd "./../../." && pwd)`
 kpse_SRC=`(cd "$srcdir/../../." && pwd)`
 
-##tldbg _KPSE_USE_LIBTOOL: Generate a libtool script for use in configure tests.
+echo 'tldbg:_KPSE_USE_LIBTOOL called, libtool package version: 2.4.7' >&5
 : ${CONFIG_LT=./config.lt}
 { printf "%s\n" "$as_me:${as_lineno-$LINENO}: creating $CONFIG_LT" >&5
 printf "%s\n" "$as_me: creating $CONFIG_LT" >&6;}
@@ -14661,12 +14794,14 @@ lt_cv_to_host_file_cmd='`$ECHO "$lt_cv_to_host_file_cmd" | $SED "$delay_single_q
 lt_cv_to_tool_file_cmd='`$ECHO "$lt_cv_to_tool_file_cmd" | $SED "$delay_single_quote_subst"`'
 reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`'
 reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`'
+FILECMD='`$ECHO "$FILECMD" | $SED "$delay_single_quote_subst"`'
 deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`'
 file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`'
 file_magic_glob='`$ECHO "$file_magic_glob" | $SED "$delay_single_quote_subst"`'
 want_nocaseglob='`$ECHO "$want_nocaseglob" | $SED "$delay_single_quote_subst"`'
 sharedlib_from_linklib_cmd='`$ECHO "$sharedlib_from_linklib_cmd" | $SED "$delay_single_quote_subst"`'
 AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`'
+lt_ar_flags='`$ECHO "$lt_ar_flags" | $SED "$delay_single_quote_subst"`'
 AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`'
 archiver_list_spec='`$ECHO "$archiver_list_spec" | $SED "$delay_single_quote_subst"`'
 STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`'
@@ -14790,13 +14925,13 @@ LN_S \
 lt_SP2NL \
 lt_NL2SP \
 reload_flag \
+FILECMD \
 deplibs_check_method \
 file_magic_cmd \
 file_magic_glob \
 want_nocaseglob \
 sharedlib_from_linklib_cmd \
 AR \
-AR_FLAGS \
 archiver_list_spec \
 STRIP \
 RANLIB \
@@ -15049,6 +15184,9 @@ to_host_file_cmd=$lt_cv_to_host_file_cmd
 # convert \$build files to toolchain format.
 to_tool_file_cmd=$lt_cv_to_tool_file_cmd
 
+# A file(cmd) program that detects file types.
+FILECMD=$lt_FILECMD
+
 # Method to check whether dependent libraries are shared objects.
 deplibs_check_method=$lt_deplibs_check_method
 
@@ -15067,8 +15205,11 @@ sharedlib_from_linklib_cmd=$lt_sharedlib_from_linklib_cmd
 # The archiver.
 AR=$lt_AR
 
+# Flags to create an archive (by configure).
+lt_ar_flags=$lt_ar_flags
+
 # Flags to create an archive.
-AR_FLAGS=$lt_AR_FLAGS
+AR_FLAGS=\${ARFLAGS-"\$lt_ar_flags"}
 
 # How to feed a file listing to the archiver.
 archiver_list_spec=$lt_archiver_list_spec
@@ -15444,7 +15585,7 @@ ltmain=$ac_aux_dir/ltmain.sh
   # if finds mixed CR/LF and LF-only lines.  Since sed operates in
   # text mode, it properly converts lines to CR/LF.  This bash problem
   # is reportedly fixed, but why not run on old versions too?
-  sed '$q' "$ltmain" >> "$cfgfile" \
+  $SED '$q' "$ltmain" >> "$cfgfile" \
      || (rm -f "$cfgfile"; exit 1)
 
    mv -f "$cfgfile" "$ofile" ||
@@ -15468,12 +15609,202 @@ $SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false
 exec 5>>config.log
 $lt_cl_success || as_fn_exit 1
 
+#
+#
 ac_ext=c
 ac_cpp='$CPP $CPPFLAGS'
 ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
 ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
 ac_compiler_gnu=$ac_cv_c_compiler_gnu
 ac_link="./libtool --mode=link --tag=CC $ac_link"
+#
+# am_prog_ar needed for dvisvgm, at least.
+
+  if test -n "$ac_tool_prefix"; then
+  for ac_prog in ar lib "link -lib"
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+printf %s "checking for $ac_word... " >&6; }
+if test ${ac_cv_prog_AR+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  if test -n "$AR"; then
+  ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  case $as_dir in #(((
+    '') as_dir=./ ;;
+    */) ;;
+    *) as_dir=$as_dir/ ;;
+  esac
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then
+    ac_cv_prog_AR="$ac_tool_prefix$ac_prog"
+    printf "%s\n" "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+AR=$ac_cv_prog_AR
+if test -n "$AR"; then
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $AR" >&5
+printf "%s\n" "$AR" >&6; }
+else
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
+printf "%s\n" "no" >&6; }
+fi
+
+
+    test -n "$AR" && break
+  done
+fi
+if test -z "$AR"; then
+  ac_ct_AR=$AR
+  for ac_prog in ar lib "link -lib"
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+printf %s "checking for $ac_word... " >&6; }
+if test ${ac_cv_prog_ac_ct_AR+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  if test -n "$ac_ct_AR"; then
+  ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  case $as_dir in #(((
+    '') as_dir=./ ;;
+    */) ;;
+    *) as_dir=$as_dir/ ;;
+  esac
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_AR="$ac_prog"
+    printf "%s\n" "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_AR=$ac_cv_prog_ac_ct_AR
+if test -n "$ac_ct_AR"; then
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5
+printf "%s\n" "$ac_ct_AR" >&6; }
+else
+  { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5
+printf "%s\n" "no" >&6; }
+fi
+
+
+  test -n "$ac_ct_AR" && break
+done
+
+  if test "x$ac_ct_AR" = x; then
+    AR="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+printf "%s\n" "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    AR=$ac_ct_AR
+  fi
+fi
+
+: ${AR=ar}
+
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking the archiver ($AR) interface" >&5
+printf %s "checking the archiver ($AR) interface... " >&6; }
+if test ${am_cv_ar_interface+y}
+then :
+  printf %s "(cached) " >&6
+else $as_nop
+  ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+ac_link="./libtool --mode=link --tag=CC $ac_link"
+
+   am_cv_ar_interface=ar
+   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+int some_variable = 0;
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"
+then :
+  am_ar_try='$AR cru libconftest.a conftest.$ac_objext >&5'
+      { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$am_ar_try\""; } >&5
+  (eval $am_ar_try) 2>&5
+  ac_status=$?
+  printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+      if test "$ac_status" -eq 0; then
+        am_cv_ar_interface=ar
+      else
+        am_ar_try='$AR -NOLOGO -OUT:conftest.lib conftest.$ac_objext >&5'
+        { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$am_ar_try\""; } >&5
+  (eval $am_ar_try) 2>&5
+  ac_status=$?
+  printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+        if test "$ac_status" -eq 0; then
+          am_cv_ar_interface=lib
+        else
+          am_cv_ar_interface=unknown
+        fi
+      fi
+      rm -f conftest.lib libconftest.a
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext
+   ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+ac_link="./libtool --mode=link --tag=CC $ac_link"
+
+fi
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $am_cv_ar_interface" >&5
+printf "%s\n" "$am_cv_ar_interface" >&6; }
+
+case $am_cv_ar_interface in
+ar)
+  ;;
+lib)
+  # Microsoft lib, so override with the ar-lib wrapper script.
+  # FIXME: It is wrong to rewrite AR.
+  # But if we don't then we get into trouble of one sort or another.
+  # A longer-term fix would be to have automake use am__AR in this case,
+  # and then we could set am__AR="$am_aux_dir/ar-lib \$(AR)" or something
+  # similar.
+  AR="$am_aux_dir/ar-lib $AR"
+  ;;
+unknown)
+  as_fn_error $? "could not determine $AR interface" "$LINENO" 5
+  ;;
+esac
+
 
 if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}pkg-config", so it can be a program name with args.
@@ -16408,12 +16739,14 @@ lt_cv_to_host_file_cmd='`$ECHO "$lt_cv_to_host_file_cmd" | $SED "$delay_single_q
 lt_cv_to_tool_file_cmd='`$ECHO "$lt_cv_to_tool_file_cmd" | $SED "$delay_single_quote_subst"`'
 reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`'
 reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`'
+FILECMD='`$ECHO "$FILECMD" | $SED "$delay_single_quote_subst"`'
 deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`'
 file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`'
 file_magic_glob='`$ECHO "$file_magic_glob" | $SED "$delay_single_quote_subst"`'
 want_nocaseglob='`$ECHO "$want_nocaseglob" | $SED "$delay_single_quote_subst"`'
 sharedlib_from_linklib_cmd='`$ECHO "$sharedlib_from_linklib_cmd" | $SED "$delay_single_quote_subst"`'
 AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`'
+lt_ar_flags='`$ECHO "$lt_ar_flags" | $SED "$delay_single_quote_subst"`'
 AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`'
 archiver_list_spec='`$ECHO "$archiver_list_spec" | $SED "$delay_single_quote_subst"`'
 STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`'
@@ -16537,13 +16870,13 @@ LN_S \
 lt_SP2NL \
 lt_NL2SP \
 reload_flag \
+FILECMD \
 deplibs_check_method \
 file_magic_cmd \
 file_magic_glob \
 want_nocaseglob \
 sharedlib_from_linklib_cmd \
 AR \
-AR_FLAGS \
 archiver_list_spec \
 STRIP \
 RANLIB \
@@ -17496,6 +17829,9 @@ to_host_file_cmd=$lt_cv_to_host_file_cmd
 # convert \$build files to toolchain format.
 to_tool_file_cmd=$lt_cv_to_tool_file_cmd
 
+# A file(cmd) program that detects file types.
+FILECMD=$lt_FILECMD
+
 # Method to check whether dependent libraries are shared objects.
 deplibs_check_method=$lt_deplibs_check_method
 
@@ -17514,8 +17850,11 @@ sharedlib_from_linklib_cmd=$lt_sharedlib_from_linklib_cmd
 # The archiver.
 AR=$lt_AR
 
+# Flags to create an archive (by configure).
+lt_ar_flags=$lt_ar_flags
+
 # Flags to create an archive.
-AR_FLAGS=$lt_AR_FLAGS
+AR_FLAGS=\${ARFLAGS-"\$lt_ar_flags"}
 
 # How to feed a file listing to the archiver.
 archiver_list_spec=$lt_archiver_list_spec
@@ -17891,7 +18230,7 @@ ltmain=$ac_aux_dir/ltmain.sh
   # if finds mixed CR/LF and LF-only lines.  Since sed operates in
   # text mode, it properly converts lines to CR/LF.  This bash problem
   # is reportedly fixed, but why not run on old versions too?
-  sed '$q' "$ltmain" >> "$cfgfile" \
+  $SED '$q' "$ltmain" >> "$cfgfile" \
      || (rm -f "$cfgfile"; exit 1)
 
    mv -f "$cfgfile" "$ofile" ||