% This is JNSL.DOC the documentation file of % the LaTeX macro package from Springer-Verlag % for the Journal of Nonlinear Science % version of 16 July 1990 \documentstyle[jnsldoc]{jns} % \newfont{\titelfont}{cmr10 scaled 1728} \newfont{\titelbffont}{cmbx10 scaled 2074} \newfont{\titelbigfont}{cmr10 scaled 2488} \markboth{Style File for Authors Coding with \LaTeX{}}{Style File for Authors Coding with \LaTeX{}} % \begin{document} \thispagestyle{empty} \begin{flushleft} {\titelbffont Style File}\\[6pt] {\titelbffont for Authors Coding with \LaTex{}}\\[2cm] \end{flushleft} \rule{\textwidth}{1pt} \vspace{2pt} \begin{flushright} \begin{tabular}{@{}l} {\titelbigfont The Journal of}\\[9pt] {\titelbigfont Nonlinear Science}\\[10pt] \end{tabular} \end{flushright} \rule{\textwidth}{1pt} \vfill \begin{flushright} \begin{tabular}{@{}l} {\titelfont Springer-Verlag}\\[5pt] {\titelfont New \kern-4pt York Berlin Heidelberg Tokyo}\\[5pt] {\titelfont London Paris Hong \kern-3pt Kong} \end{tabular} \end{flushright} \newpage % \section*{For further information please contact us:} % \begin{flushleft} \begin{tabular}{l@{\quad}l@{\hspace{3mm}}l} $\bullet$ & \multicolumn{2}{l}{\bf Springer-Verlag New \kern-3pt York}\\[0.5mm] & \multicolumn{2}{l}{Springer-Verlag New \kern-2pt York, 175 Fifth Avenue,}\\ & & New \kern-2pt York, New \kern-2pt York 10010 USA\\[0.5mm] & Telex: & 232235\\ & Fax: & (212)437-6272\\ & Editorial: & (Mon--Fr; preferably between 9 a.m. and 4 p.m. --\\ & & Eastern Standard Time)\\ & & Telephone (212)460-1565\\ & net-address: & TROWBRIDGE@COMPUSERVE.COM\\[1mm] $\bullet$ & \multicolumn{2}{l}{\bf Springer-Verlag Heidelberg}\\[1mm] & \multicolumn{2}{l}{Springer-Verlag, Postfach 105280, D-6900 Heidelberg 1, FRG}\\[0.5mm] & DATEX-P dial: & FRG 456 221 4305\\ & & If you do not yet have an account, press RETURN\\ & & when asked for your name; then simply leave a message.\\ & & The file name should be your name and country\\ & & or state, e.g.\ smith-texas\\ & Telex: & 461723\\ & Telefax: & (06221)43982\\ & Editorial: & (Mon--Fr; preferably between 9 a.m.\\ & & and 4 p.m. -- European local time)\\ & & Telephone (0049)(0)6221-487534\\ & \multicolumn{2}{l}{\TeX{}nical and \LaTeX{}nical information (Mon--Fri; preferably between}\\ & & 9 a.m. and 1 p.m. -- European local time):\\ & & Telephone (0049)(0)6221-487478\\ &bitnet/EARN:& SPRINGER@DHDSPRI6 \end{tabular} \end{flushleft} \rule{\textwidth}{1pt} % \section*{Mailing address for your disk/magnetic tape and output:} % \begin{quote} Springer-Verlag New \kern-2pt York, Inc.\\ 175 Fifth Avenue\\ New \kern-2pt York, New \kern-2pt York 10010 USA \end{quote} The following formats are acceptable: 5.25$^{\prime\prime}$ diskette MS-DOS, 5.25$^{\prime\prime}$ CP/M, 3.5$^{\prime\prime}$ diskette MS-DOS, 3.5$^{\prime\prime}$ diskette Apple MacIntosh, 9-track 1600 bpi magnetic tape VAX/VMS, 9-track 1600 bpi magnetic tape ANSI with label, 9-track 1600 bpi magnetic tape, SUN-Streamer Tape. Once you have completed your work using this macro package, please submit your own printout of the {\it final version together with the disk or magnetic tape}, containing your \LaTeX{} input (source) file und the final DVI-file and make sure that the text is {\it identical in both cases.} Contributions coded with \LaTeX{} but not with the JNS style, cannot be accepted for electronic processing; they will be typeset in the conventional way. % \newpage \tableofcontents \newpage % \section{Introduction} % Authors wishing to code their contribution for the \begin{center} {\it Journal of Nonlinear Science,} \end{center} with \LaTeX{}, as well as those who have already coded with \LaTeX{}, will be provided with a style file that will give the text the desired layout. Authors are requested to adhere strictly to these instructions; {\it the style file must not be changed}. The text output area is automatically set within an area of 12.2\,cm horizontally and 19.4\,cm vertically, excluding running heads. If you are already familiar with \LaTeX{}, then the JNS style file should not give you any major difficulties. This style file will change the layout to the required JNS style (it will for instance define the layout of \verb|\section|). We had to invent some extra commands, which are not provided by \LaTeX{} (e.g.\ \verb|\institute|, see also Sect.\,\ref{contbegin}) For the main body of the paper (the text) you should use the commands of the standard \LaTeX{} ``article'' style. Even if you are familiar with those commands, we urge you to read this entire documentation thoroughly. It contains many suggestions on how to use our commands properly; thus your paper will be formatted exactly to JNS standard. For the input of the references at the end of your contribution, please follow our instructions given in Sect.\,\ref{refer} References. The majority of these hints are not specific for JNS; they may improve your use of \LaTeX{} in general. Furthermore, the documentation provides suggestions about the proper editing and use of the input files (capitalization, abbreviation etc.) (see Sect.\,\ref{refedit} How to Edit Your Input File). % \section{How to Proceed} % Please insert the enclosed diskette or tape into your computer. You will find the following files: \begin{flushleft} \begin{tabular}{@{}p{2.5cm}l} {\it jnsl.doc} & General instructions (this document),\\ & {\it jnsl.doc} means jns latex.documentation\\ {\it jnsl.dem} & An example showing how to code the text\\ {\it jns.sty} & Style file to invoke \LaTeX{} \end{tabular} \end{flushleft} You have to run each file twice with: \verb|latex file.name|. % \subsection{How to Invoke the JNS Style File} % The JNS style file is an adaptation of the \LaTeX{} ``article'' style. Therefore you may use all ``article'' style commands to prepare your manuscript. JNS style is invoked by replacing ``article'' by ``jns'' in the first line of your document: \begin{verbatim} \documentstyle{jns}| % \begin{document} \end{document} \end{verbatim} % \subsection{Contributions Already Coded with \protect\LaTeX{} without the JNS Style File} % If your file is already coded with \LaTeX{} you can easily adapt it a posteriori to JNS style. Contributions submitted to us in \LaTeX{} but not adapted to JNS style, cannot be accepted for electronic processing; they will be typeset in the conventional way. Please refrain from using any \LaTeX{} or \TeX{} commands that affect the layout or formatting of your document (i.e. commands like \verb|\textheight|, \verb|\vspace|, \verb|\hoffset| etc.). There may nevertheless be exceptional occasions on which to use some of them. The JNS style has been carefully designed to produce the right layout from your \LaTeX{} input. If there is anything specific you would like to do and for which the style file does not provide a command, {\em please contact us.\/} % \section{General Rules for Coding Formulas} % With mathematical formulas you may proceed as described in Sect.\,3.3 of the {\em \LaTeX{} User's Guide \& Reference Manual\/} by Leslie Lamport (1986), Addison-Wesley Publishing Company, Reading, Mass. Equations are automatically numbered sequentially throughout your contribution using arabic numerals in parentheses on the right-hand side. When you are working in math mode everything is typeset in italics. Sometimes you need to insert non-mathematical elements (e.g.\ words or phrases). Such insertions should be coded in roman (with \verb|\mbox|) as illustrated in the following example: \begin{flushleft} {\it Sample Input} \end{flushleft} \begin{verbatim} \begin{equation} \left(\frac{a^{2} + b^{2}}{c^{3}} \right) = 1 \quad \mbox{ if } c\neq 0 \mbox{ and if } a,b,c\in \bbbr \enspace . \end{equation} \end{verbatim} {\it Sample Output} \begin{equation} \left(\frac{a^{2} + b^{2}}{c^{3}} \right) = 1 \quad \mbox{ if } c\neq 0 \mbox{ and if } a,b,c\in \bbbr \enspace . \end{equation} If you wish to start a new paragraph immediately after a displayed equation, insert a blank line so as to produce the required indentation. If there is no new paragraph either do not insert a blank line or code \verb|\noindent| immediately before continuing the text. Titles have no end punctuation. Please punctuate a displayed equation in the same way as other ordinary text but with an \verb|\enspace| before end punctuation. Note that the sizes of the parentheses or other delimiter symbols used in equations should ideally match the height of the formulas being enclosed. This is automatically taken care of by the following \LaTeX{} commands:\\[2mm] \verb|\left(| or \verb|\left[| and \verb|\right)| or \verb|\right]|. % \subsection{Italic and Roman Type in Math Mode} % \begin{alpherate} \item In math mode \TeX{} and \LaTeX{} treat all letters as though they were mathematical or physical variables, hence they are typeset in italics. However, for certain components of formulas, like short texts, this would be incorrect and therefore coding in roman is required. Roman should also be used for subscripts and superscripts {\it in formulas\/} where these are merely labels and not in themselves variables, e.g.\ $T_{\rm eff}$ \ not \ $T_{eff}$, $T_{\rm K}$ \ not \ $T_K$ (K = Kelvin), $m_{\rm e}$ \ not \ $m_e$ (e = electron). However, do not code for roman if the sub/superscripts represent variables, e.g.\ $\sum_{i=1}^{n} a_{i}$. \item Please ensure that {\em physical units\/} (e.g.\ pc, erg s$^{-1}$ K, cm$^{-3}$, W m$^{-2}$ Hz$^{-1}$, m kg s$^{-2}$ A$^{-2}$) and {\it abbreviations} such as Ord, Var, GL, SL, sgn, const.\ are always set in roman type. To ensure this use the \verb|\rm| command: \verb|{\rm Hz}|. On p.\ 46 of the {\em \LaTeX{} User's Guide \& Reference Manual\/} by Leslie Lamport you will find the names of common mathe\-matical functions, such as log, sin, exp, max and sup. These should be coded as \verb|\log|, \verb|\sin|, \verb|\exp|, \verb|\max|, \verb|\sup| and will appear in roman. \item Chemical symbols and formulas should be coded for roman, e.g.\ Fe not $Fe$, H$_2$O not {\em H$_2$O\/}. \item Familiar foreign words and phrases, e.g.\ et al., a priori, in situ, brems\-strah\-lung, eigenvalues should not be italicized. \end{alpherate} % \section{How to Edit Your Input (Source) File} \label{refedit} % \subsection{Headings} % All words in headings should be capitalized except for conjunctions, prepositions (e.g.\ on, of, by, and, or, but, from, with, without, under) and definite and indefinite articles (the, a, an) unless they appear at the beginning. Formula letters must be typeset as in the text. % \subsection{Capitalization and Non-capitalization} % \begin{alpherate} \item The following should always be capitalized: \begin{itemize} \item Headings (see preceding Sect.\,4.1) \item Abbreviations and expressions in the text such as Fig(s)., Table(s), Sect(s)., Chap(s)., Theorem, Corollary, Definition etc. when used with numbers, e.g.\ Fig.\,3, Table\,1, Theorem 2. \end{itemize} Please follow the special rules in Sect.\,4.3 for referring to equations. \item The following should {\it not\/} be capitalized: \begin{itemize} \item The words figure(s), table(s), equation(s), theorem(s) in the text when used without an accompanying number \item Figure legends and table captions except for names and abbreviations. \end{itemize} \end{alpherate} % \subsection{Abbreviation of Words} % \begin{alpherate} \item The following {\it should} be abbreviated when they appear in running text {\it unless\/} they come at the beginning of a sentence: Chap., Sect., Fig.; e.g.\ The results are depicted in Fig.\,5. Figure 9 reveals that \dots .\\ {\it Please note\/}: Equations should usually be referred to solely by their number in parentheses: e.g.\ (14). However, when the reference comes at the beginning of a sentence, the unabbreviated word ``Equation'' should be used: e.g.\ Equation (14) is very important. However, (15) makes it clear that \dots . \item If abbreviations of names or concepts are used throughout the text, they should be defined at first occurrence, e.g.\ Plurisubharmonic (PSH) Functions, Strong Optimization (SOPT) Problem. \end{alpherate} % \section{How to Code the Beginning of Your Contribution} \label{contbegin} % The title of your contribution should be coded as follows: \begin{verbatim} \title{} \end{verbatim} All words in titles should be capitalized except for conjunctions, prepositions (e.g.\ on, of, by, and, or, but, from, with, without, under) and definite and indefinite articles (the, a, an) unless they appear at the beginning. Formula letters must be typeset as in the text. Titles have no end punctuation. If a long \verb|\title| must be divided please use the code \verb|\\| (for new line).\\[6mm] Now the name(s) of the authors(s) must be given: \begin{verbatim} \author{} \end{verbatim} Numbers referring to different addresses are to be attached to each author. If you have done this correctly, the entry now reads, for example: \begin{verbatim} \author{Ivar Ekeland\inst{1} and Roger Temam\inst{2}} \end{verbatim} The first name\footnote{Other initials are optional and may be inserted if this is the usual way of writing your name, e.g.\ Alfred J.~Holmes, E.~Henry Green.} is followed by the surname. If there is more than one author, the order is up to you. However, if there are more than two authors, you must separate the names by commas. If the authors have different affiliations, each name has to be followed by: \begin{verbatim} \inst{no} \end{verbatim} \newpage Next the address(es) of institute(s), company etc. is (are) required. If there is more than one address, the entries are numbered automatically with \verb|\and|, in the order in which you type them. Please make sure that the numbers match those placed next to to the authors' names. \begin{verbatim} \institute{ \and \and } \end{verbatim} Unlike usual \LaTeX{} the \verb|\and| command is used with the \verb|\institute| and not with the \verb|\author| command. \medskip If footnotes are needed in \verb|\title| please code (immediately after the word where the footnote indicator should be placed): \begin{verbatim} \thanks{} \end{verbatim} \verb|\thanks| may only appear in \verb|\title|, \verb|\author| and \verb|\institute| (see below) to footnote anything. \medskip\noindent The command \begin{verbatim} \maketitle \end{verbatim} formats the complete heading of your article. If you leave it out the work done so far will produce {\bf no} text, see {\it Sample Input} on p.~\pageref{samppage}. % \section{How to Code Your Text} % The contribution title and all headings should be capitalized except for conjunctions, prepositions (e.g.\ on, of, by, and, or, but, from, with, without, under) and definite and indefinite articles (the, a, an) unless they appear at the beginning. Formula letters must be typeset as in the text. Headings will be automatically numbered by the following codes.\\[2mm] {\it Sample Input} \begin{verbatim} \section{This is a First-Order Title} \subsection{This is a Second-Order Title} \subsubsection{This is a Third-Order Title.} \paragraph{This is a Fourth-Order Title.} \end{verbatim} \verb|\section| and \verb|\subsection| have no end punctuation.\\ \verb|\subsubsection| and \verb|\paragraph| need to be punctuated at the end. Note that \verb|\title| and \verb|\author| will create the page header (running head), but it may happen that you need to shorten your title for the page header, because only one line is allowed (our macro will produce an error message whereupon you must provide a shortened version of the title for the page header). In this case you should use the following coding directly after the coding of \verb|\title| or \verb|\author|. \begin{verbatim} \titlerunning{Abbreviated contribution title} \authorrunning{Abbreviated authors} \end{verbatim} \newpage In addition to the above-mentioned headings your text may be structured by subsections indicated by run-in headings (theorem-like environments). All the theorem-like environments are numbered automatically throughout the sections of your file. If you call lemma once, this will be numbered 1; if corollary follows, this will be numbered 2; if you then call lemma again, this will be numbered 3. But in case you want to reset this counter at 1 in each section, please give the document style option \verb|envcountreset|: \begin{verbatim} \documentstyle[envcountreset]{jns} \end{verbatim} \vspace{.5cm}\noindent The following possibilities for run-in headings are available: \begin{flushleft} \verb|\begin{lemma} Text of the lemma \end{lemma}|\quad (see Output Sample 1)\\[2mm] % \verb|\begin{lemma}[additional explanation of lemma] Text of lemma \end{lemma}| \quad (see Output Sample 2)\\[2mm] % \verb|\begin{lemma}(overriding automatic numbering.) Text of the lemma \end{lemma}| \quad (see Output Sample 3)\\[2mm] % \verb|\begin{lemma}(x)[additional explanation of lemma] Text of lemma\end{lemma}| \quad (see Output Sample 4)\\[2mm] % \verb|\begin{lemma}* Text of lemma \end{lemma}| \quad (see Output Sample 5)\\[2mm] % \verb|\begin{lemma}*[additional explanation of lemma] Text of lemma\end{lemma}| \quad (see Output Sample 6) \end{flushleft} % \begin{flushleft} {\it Output Sample 1} \begin{lemma}Text of lemma\end{lemma} % {\it Output Sample 2} \begin{lemma}[additional explanation of lemma] Text of lemma\end{lemma} % {\it Output Sample 3} \begin{lemma}(overriding automatic numbering.) Text of lemma\end{lemma} % {\it Output Sample 4} \begin{lemma}(x)[additional explanation of lemma] Text of lemma\end{lemma} % {\it Output Sample 5} \begin{lemma}* Text of lemma\end{lemma} % {\it Output Sample 6} \begin{lemma}*[additional explanation of lemma] Text of lemma\end{lemma} \end{flushleft} \newpage \noindent The following variety of run-in headings are at your disposal: \begin{alpherate} \item {\bf Bold} run-in headings with italicized text as built-in environments: \begin{verbatim} \begin{proposition} \end{proposition} \begin{corollary} \end{corollary} \begin{lemma} \end{lemma} \begin{theorem} \end{theorem} \end{verbatim} \item The following must generally appear as {\it italic} run-in heading: \begin{verbatim} \begin{proof} \qed \end{proof} \end{verbatim} \item Further {\it italic} or {\bf bold} run-in headings may also occur: \begin{verbatim} \begin{definition} \end{definition} \begin{example} \end{example} \begin{remark} \end{remark} \begin{exercise} \end{exercise} \begin{problem} \end{problem} \begin{solution} \end{solution} \begin{note} \end{note} \begin{question} \end{question} \end{verbatim} \end{alpherate} % \subsubsection*{Defining Your Own Environments.} % You can define additional environments using the command \verb|\newstytheorem| which has five parameters. The first is the name your environment should have (e.g.\ \verb|conjecture|). After this follows the font family used for this heading (please use only \verb|\bf| for bold or \verb|\it| for italic) and the font family to use for the text of this new environment (e.g.\ \verb|\it| or \verb|\rm|). Then the name of an already known environment should be given in brackets (e.g.\ \verb|[theorem]|). Your new environment will be numbered like the old one. Finally comes the real text of the new run-in heading (e.g.\ \verb|Conjecture|).\\ Sample definition: \begin{verbatim} \newstytheorem{conjecture}{\bf}{\it}[theorem]{Conjecture} \end{verbatim} \newstytheorem{conjecture}{\bf}{\it}[theorem]{Conjecture} Use of that definition: \begin{verbatim} \begin{conjecture} \end{conjecture} \end{verbatim} e.g. \begin{verbatim} \begin{conjecture} It is clear that ...\end{conjecture} \end{verbatim} Its output: \begin{conjecture} It is clear that \dots \end{conjecture} \newpage % \noindent {\it Sample Input} \label{samppage} \begin{verbatim} \title{Hamiltonian Mechanics} \author{Ivar Ekeland\inst{1} and Roger Temam\inst{2}} \institute{Princeton University, Princeton NJ 08544, USA \and Universit\'{e} de Paris-Sud, Laboratoire d'Analyse Num\'{e}rique, B\^{a}timent 425,\\ F-91405 Orsay Cedex, France} \maketitle % \section{Fixed-Period Problems: The Sublinear Case} % With this chapter, the preliminaries are over, and we begin the search for periodic solutions \dots % \subsection{Autonomous Systems} % In this section we will consider the case when the Hamiltonian $H(x)$ \dots % \subsubsection*{The General Case: Nontriviality.} % We assume that $H$ is $\left(A_{\infty}, B_{\infty}\right)$-subqua\-dra\-tic at infinity, for some constant \dots % \paragraph{Notes and Comments.} The first results on subharmonics were \dots % \begin{proposition} Assume $H'(0)=0$ and $ H(0)=0$. Set \dots \end{proposition} \begin{proof}[of proposition] Condition (8) means that, for every $\delta'>\delta$, there is some $\varepsilon>0$ such that \dots \qed \end{proof} % \begin{example}[\rm (External forcing)] Consider the system \dots \end{example} \begin{corollary} Assume $H$ is $C^{2}$ and $\left(a_{\infty}, b_{\infty}\right)$-subquadratic at infinity. Let \dots \end{corollary} \begin{lemma} Assume that $H$ is $C^{2}$ on $\bbbr^{2n}\backslash \{0\}$ and that $H''(x)$ is \dots \end{lemma} \begin{theorem}[(Ghoussoub-Preiss)] Let $X$ be a Banach Space and $\Phi:X\to\bbbr$ \dots \end{theorem} \begin{definition} We shall say that a $C^{1}$ function $\Phi:X\to\bbbr$ satisfies \dots \end{definition} \end{verbatim} {\it Sample Output\/} (follows on the next page together with examples of the above run-in headings) % \setcounter{theorem}{0} \title{Hamiltonian Mechanics} \author{Ivar Ekeland\inst{1} and Roger Temam\inst{2}} \institute{Princeton University, Princeton NJ 08544, USA \and Universit\'{e} de Paris-Sud, Laboratoire d'Analyse Num\'{e}rique, B\^{a}timent 425,\\ F-91405 Orsay Cedex, France} \maketitle % \section*{1 \ Fixed-Period Problems: The Sublinear Case} % With this chapter, the preliminaries are over, and we begin the search for periodic solutions \dots % \subsection*{1.1 \ Autonomous Systems} % In this section we will consider the case when the Hamiltonian $H(x)$ \dots % \subsubsection*{The General Case: Nontriviality.} % We assume that $H$ is $\left(A_{\infty}, B_{\infty}\right)$-subqua\-dra\-tic at infinity, for some constant \dots % \paragraph{Notes and Comments.} The first results on subharmonics were \dots % \begin{proposition} Assume $H'(0)=0$ and $ H(0)=0$. Set \dots \end{proposition} \begin{proof}[of proposition] Condition (8) means that, for every $\delta'>\delta$, there is some $\varepsilon>0$ such that \dots \qed \end{proof} % \begin{example}[\rm (External forcing)] Consider the system \dots \end{example} \begin{corollary} Assume $H$ is $C^{2}$ and $\left(a_{\infty}, b_{\infty}\right)$-subquadratic at infinity. Let \dots \end{corollary} \begin{lemma} Assume that $H$ is $C^{2}$ on $\bbbr^{2n}\backslash \{0\}$ and that $H''(x)$ is \dots \end{lemma} \begin{theorem}[(Ghoussoub-Preiss)] Let $X$ be a Banach Space and $\Phi:X\to\bbbr$ \dots \end{theorem} \begin{definition} We shall say that a $C^{1}$ function $\Phi:X\to\bbbr$ satisfies \dots \end{definition} \newpage % \markboth{Style File for Authors Coding with \LaTeX{}}{Style File for Authors Coding with \LaTeX{}} \section{Fine Tuning of the Text} % The following should be used to improve the readability of the text: \begin{flushleft} \begin{tabular}{@{}p{.19\textwidth}p{.79\textwidth}} \verb|\,| & a thin space, e.g.\ between numbers or between units and num\-bers; a line division will not be made following this space\\ \verb|--| & en dash; two strokes, without a space at either end\\ \verb*| -- | & en dash; two strokes, with a space at either end\\ \verb|-| & hyphen; one stroke, no space at either end\\ \verb|$-$| & minus, in the text {\em only} \\[8mm] {\em Input} & \verb|21\,$^{\circ}$C etc.,|\\ & \verb|Dr h.\,c.\,Rockefellar-Smith \dots|\\ & \verb|20,000\,km and Prof.\,Dr Mallory \dots|\\ & \verb|1950--1985 \dots|\\ & \verb|this -- written on a computer -- is now printed|\\ & \verb|$-30$\,K \dots|\\[3mm] {\em Output} & 21\,$^{\circ}$C etc., Dr h.\,c.\,Rockefellar-Smith \dots\\ & 20,000\,km and Prof.\,Dr Mallory \dots\\ & 1950--1985 \dots\\ & this -- written on a computer -- is now printed\\ & $-30$\,K \dots \end{tabular} \end{flushleft} % \section {Special Typefaces} % Normal type (roman) need not be coded. {\it Italic} (not {\sl slanted}) or, if necessary, {\bf boldface} should be used for emphasis in the text. \begin{flushleft} \begin{tabular}{@{}p{.19\textwidth}p{.79\textwidth}} \verb|{\it Text}| & {\it Italicized Text}\\ \verb|{\em Text}| & {\em Emphasized Text}\\ & {\it If you would like to emphasize a {\em definition} within an italicized text (e.g.\ of a {\em theorem)} you should code the expression to be emphasized by} \verb|\em|.\\ \verb|{\bf Text}| & {\bf Important Text}\\ \verb|\vec{Symbol}| & Vectors may only appear in math mode. The default \LaTeX{} vector symbol has been adapted to JNS conventions.\\ & \verb|$\vec{A times B\cdot C}| yields $\vec{A\times B\cdot C}$\\ & \verb|$\vec{A}^{T} \otimes \vec{B} \otimes \vec{\hat{D}}$|\\ & yields $\vec{A}^{T} \otimes \vec{B} \otimes \vec{\hat{D}}$ \end{tabular} \end{flushleft} \newpage % \section {Footnotes} % Footnotes within the text should be coded: \begin{verbatim} \footnote{Text} \end{verbatim} {\it Sample Input} \begin{flushleft} Text with a footnote\verb|\footnote{The footnote is automatically numbered.}| and text continues \dots \end{flushleft} {\it Sample Output} \begin{flushleft} Text with a footnote\footnote{The footnote is automatically numbered.} and text continues \dots \end{flushleft} % \section {Lists} % Please code lists as described below:\\[2mm] {\it Sample Input} \begin{verbatim} \begin{enumerate} \item First item \item Second item \begin{enumerate} \item First nested item \item Second nested item \end{enumerate} \item Third item \end{enumerate} \end{verbatim} {\it Sample Output} \begin{enumerate} \item First item \item Second item \begin{enumerate} \item First nested item \item Second nested item \end{enumerate} \item Third item \end{enumerate} \newpage % \section {Figures} % Figure legends should be inserted after (not in) the paragraph in which the figure is first mentioned. They will be numbered automatically. {\it The figures\/} (line drawings and those containing halftone inserts as well as halftone figures) {\it should not be pasted into your laserprinter output}. They should be enclosed separately in camera-ready form (original artwork, glossy prints, photographs and/or slides). The lettering should be suitable for reproduction, and after reduction the height of capital letters should be at least 1.8\,mm and not more than 2.5\,mm. Check that lines and other details are uniformly black and that the lettering on figures is clearly legible. To leave the desired amount of space for the height of your figures, please use the coding described below. As can be seen in the output, we will automatically provide 1\,cm space above and below the figure, so that you should only leave the space equivalent to the size of the figure itself. Please note that ``\verb|x|'' in the following coding stands for the actual height of the figure: \begin{verbatim} \begin{figure} \vspace{x cm} \caption[ ]{...text of caption...} (Do type [ ]) \end{figure} \end{verbatim} \begin{flushleft} {\it Sample Input} \end{flushleft} \begin{verbatim} \begin{figure} \vspace{2.5cm} \caption{This is the caption of the figure displaying a white eagle and a white horse on a snow field} \end{figure} \end{verbatim} \begin{flushleft} {\it Sample Output} \end{flushleft} \begin{figure} \vspace{2.5cm} \caption{This is the caption of the figure displaying a white eagle and a white horse on a snow field} \end{figure} % \section{Tables} % Table captions should be treated in the same way as figure legends, except that the table captions appear {\it above} the tables. The tables will be numbered automatically. % \subsection{Tables Coded with \protect\LaTeX{}} % Please use the following coding:\\[2mm] {\it Sample Input} \begin{verbatim} \begin{table} \caption[ ]{Observational results from NGC 4827} \begin{flushleft} \begin{tabular}{llllllllllllll} \hline & & \multicolumn{3}{l}{RA (1950)} &\ & \multicolumn{3}{l}{Dec (1950)} & $S$ & Pol & \% & $\log P$\\ \cline{3-5}\cline{7-9} & &(h) &(m) & (s) & & (\degr) & (\arcmin) & (\arcsec) & (mJy) & (mJy) & & (W Hz$^{-1}$)\\ \hline Core & (5 GHz) & 12 & 54 & 18.0 & & 27 & 26 & 56.2 & 8 & & & 21.64 \\ Total&(327 MHz)& & & & & & & & 210 & & & 23.13 \\ &(1.4 GHz)& & & & & & & & 57 & 1.3 & 2 & 22.49 \\ & (5 GHz) & & & & & & & & 26 & 0.73 & 3 & 22.15 \\ \hline \end{tabular} \end{flushleft} \end{table} Before continuing your text you need an empty line. \dots \end{verbatim} \begin{table} \caption[ ]{Observational results from NGC 4827} \begin{flushleft} \renewcommand{\arraystretch}{1.2} \begin{tabular}{llllllllllllll} \hline & & \multicolumn{3}{l}{RA (1950)} &\ & \multicolumn{3}{l}{Dec (1950)} & $S$ & Pol & \% & $\log P$\\ \cline{3-5}\cline{7-9} & &(h) &(m) & (s) & & (\degr) & (\arcmin) & (\arcsec) & (mJy) & (mJy) & & (W Hz$^{-1}$)\\ \hline Core & (5 GHz) & 12 & 54 & 18.0 & & 27 & 26 & 56.2 & 8 & & & 21.64 \\ Total&(327 MHz)& & & & & & & & 210 & & & 23.13 \\ &(1.4 GHz)& & & & & & & & 57 & 1.3 & 2 & 22.49 \\ & (5 GHz) & & & & & & & & 26 & 0.73 & 3 & 22.15 \\ \hline \end{tabular} \renewcommand{\arraystretch}{1} \end{flushleft} \end{table} Before continuing your text you need an empty line. \dots \vspace{3mm} For further information you will find a complete description of the tabular environment on p.~63~ff. and p.~182 of the {\em \LaTeX{} User's Guide \& Reference Manual\/} by Leslie Lamport. % \subsection{Tables Not Coded with \protect\LaTeX{}} % If you do not wish to code your table using \LaTeX{} but prefer to have it reproduced separately, proceed as for figures and use the following coding:\\[2mm] {\it Sample Input} \begin{verbatim} \begin{table} \caption{text of your caption} \vspace{x cm} % the actual height needed for your table \end{table} \end{verbatim} % \subsection{Signs and Characters} % \subsubsection*{Special Signs.} % You may need to use special signs. The available ones are listed in the {\em \LaTeX{} User's Guide \& Reference Manual\/} by Leslie Lamport, pp.~44\,ff. We have created further symbols for math mode (enclosed in \$): \begin{center} \begin{tabular}{l@{\hspace{1em}yields\hspace{1em}} c@{\hspace{3em}}l@{\hspace{1em}yields\hspace{1em}}c} \verb|\grole| & $\grole$ & \verb|\getsto| & $\getsto$\\ \verb|\lid| & $\lid$ & \verb|\gid| & $\gid$ \end{tabular} \end{center} % \subsubsection*{Gothic (Fraktur).} % If gothic letters are {\it necessary}, please use those of the relevant \AmSTeX{} alphabet which are available from the American Mathematical Society. In \LaTeX{} only the following gothic letters are available: \verb|$\Re$| yields $\Re$ and \verb|$\Im$| yields $\Im$. These should {\it not\/} be used when you need gothic letters for your contribution. Use \AmSTeX{} gothic as explained above. For the real and the imaginary parts of a complex number within math mode you should use instead: \verb|$\rm Re$| (which yields Re) or \verb|$\rm Im$| (which yields Im). % \subsubsection*{Script.} % For script capitals use the coding \begin{center} \begin{tabular}{l@{\hspace{1em}which yields\hspace{1em}}c} \verb|$\cal AB$| & $\cal AB$ \end{tabular} \end{center} (see p.~43 of the \LaTeX{} book). % \subsubsection*{Special Roman.} % If you need other symbols than those below, you could use the blackboard bold characters of \AmSTeX{}, but there might arise capacity problems in loading additional \AmSTeX{} fonts. Therefore we created the blackboard bold characters listed below. \begin{flushleft} \begin{tabular}{@{}ll@{ yields } c@{\hspace{1.1em}}ll@{ yields }c} \verb|\bbbc| & (complex numbers) & $\bbbc$ & \verb|\bbbf| & (blackboard bold F) & $\bbbf$\\ \verb|\bbbh| & (blackboard bold H) & $\bbbh$ & \verb|\bbbk| & (blackboard bold K) & $\bbbk$\\ \verb|\bbbm| & (blackboard bold M) & $\bbbm$ & \verb|\bbbn| & (natural numbers N) & $\bbbn$\\ \verb|\bbbp| & (blackboard bold P) & $\bbbp$ & \verb|\bbbq| & (rational numbers) & $\bbbq$\\ \verb|\bbbr| & (real numbers) & $\bbbr$ & \verb|\bbbs| & (blackboard bold S) & $\bbbs$\\ \verb|\bbbt| & (blackboard bold T) & $\bbbt$ & \verb|\bbbz| & (whole numbers) & $\bbbz$\\ \verb|\bbbone| & (symbol one) & $\bbbone$ \end{tabular} \end{flushleft} \begin{displaymath} \begin{array}{c} \bbbc^{\bbbc^{\bbbc}} \otimes \bbbf_{\bbbf_{\bbbf}} \otimes \bbbh_{\bbbh_{\bbbh}} \otimes \bbbk_{\bbbk_{\bbbk}} \otimes \bbbm^{\bbbm^{\bbbm}} \otimes \bbbn_{\bbbn_{\bbbn}} \otimes \bbbp^{\bbbp^{\bbbp}}\\[2mm] \otimes \bbbq_{\bbbq_{\bbbq}} \otimes \bbbr^{\bbbr^{\bbbr}} \otimes \bbbs^{\bbbs_{\bbbs}} \otimes \bbbt^{\bbbt^{\bbbt}} \otimes \bbbz \otimes \bbbone^{\bbbone_{\bbbone}} \end{array} \end{displaymath} % \subsubsection*{Sans Serif.} % Using our macros you can also choose this font family; use the command \verb|\sf| for {\sf sans serif} (like \verb|\it| for {\it italic style}). % \section{References} \label{refer} % There are three reference systems available; only one, of course, should be used for your contribution. With each system (by author-year, by number only or by letter-number) a reference list containing all citations in the text, should be included at the end of your contribution placing the \LaTeX{} environment \verb|thebibliography| there. For an overall information on that environment see the {\em \LaTeX{} User's Guide \& Reference Manual\/} by Leslie Lamport, p.~73. % \subsection{Author-Year System} % References are cited in the text by name and year in parentheses and should look as follows: (Smith 1970, 1980), (Ekeland et al. 1985, Theorem 2), (Jones and Jaffe 1986; Farrow 1988, Chap.\,2). If the name is part of the sentence only the year may appear in parentheses, e.g.\ Ekeland et al. (1985, Sect.\,2.1) The reference list should contain all citations occurring in the text, ordered alphabetically by surname (with initials following). If there are several works by the same author(s) the references should be listed in the appropriate order indicated below: \begin{alpherate} \item One author: list works chronologically; \item Author and same co-author(s): list works chronologically; \item Author and different co-authors: list works alphabetically according to co-authors. \end{alpherate} If there are several works by the same author(s) and in the same year, but which are cited separately, they should be distinguished by the use of ``a'', ``b'' etc., e.g.\ (Smith 1982a), (Ekeland et al. 1982b). % \subsubsection*{How to Code Author-Year System.} % If you want to use this system you have to specify in \verb|documentstyle| the option \verb|[citeauthoryear]|, like: \begin{verbatim} \documentstyle[citeauthoryear]{jns} \end{verbatim} Write your citations in the text explicitly except for the year, leaving that up to \LaTeX{} with the \verb|\cite| command. Then give only the appropriate year as the optional argument (i.e. the label in square brackets) with the \verb|\bibitem| command(s).\\[2mm] {\it Sample Input} \begin{verbatim} The results in this section are a refined version of Clarke and Ekeland (\cite{clar:eke}); the minimality result of Proposition~14 was the first of its kind. \end{verbatim} The above input produces the citation: ``\dots\ refined version of Clarke and Ekeland (1982); the minimality\dots''. Then the \verb|\bibitem| entry of the \verb|thebibliography| environment should read: \begin{verbatim} \begin{thebibliography}{} % (do not forget {}) .. .. \bibitem[1982]{clar:eke} Clarke, F., Ekeland, I.: Nonlinear oscillations and boundary-value problems for Hamiltonian systems. Arch. Rat. Mech. Anal. {\bf 78} (1982) 315--333 .. .. \end{thebibliography} \end{verbatim} {\it Sample Output} \bibauthoryear % \subsection{References by Letter-Number or by Number Only} % References are cited in the text -- using the \verb|\cite| command of \LaTeX{} -- by number or by letter-number in square brackets, e.g.\ [1] or [E1, S2], [P1], according to your use of the \verb|\bibitem| command in the \verb|thebibliography| environment. The coding is as follows: if you choose your own label for the sources by giving an optional argument to the \verb|\bibitem| command the citations in the text are marked with the label you supplied. Otherwise a simple numbering is done. \begin{verbatim} The results in this section are a refined version of \cite{clar:eke}; the minimality result of Proposition~14 was the first of its kind. \end{verbatim} The above input produces the citation: ``\dots\ refined version of [CE1]; the min\-i\-mality\dots''. Then the \verb|\bibitem| entry of the \verb|thebibliography| environment should read: \begin{verbatim} \begin{thebibliography}{MT1} .. .. \bibitem[CE1]{clar:eke} Clarke, F., Ekeland, I.: Nonlinear oscillations and boundary-value problems for Hamiltonian systems. Arch. Rat. Mech. Anal. {\bf 78} (1982) 315--333 .. .. \end{thebibliography} \end{verbatim} The complete bibliography looks like this: % \begin{thebibliography}{MT1} % \bibitem[CE1]{clar:eke} Clarke, F., Ekeland, I.: Nonlinear oscillations and boundary-value problems for Hamiltonian systems. Arch. Rat. Mech. Anal. {\bf 78} (1982) 315--333 % \bibitem[CE2]{clar:eke:2} Clarke, F., Ekeland, I.: Solutions p\'{e}riodiques, du p\'{e}riode donn\'{e}e, des \'{e}quations hamiltoniennes. Note CRAS Paris {\bf 287} (1978) 1013--1015 % \bibitem[MT1]{mich:tar} Michalek, R., Tarantello, G.: Subharmonic solutions with prescribed minimal period for nonautonomous Hamiltonian systems. J. Diff. Eq. {\bf 72} (1988) 28--55 % \bibitem[Ta1]{tar} Tarantello, G.: Subharmonic solutions for Hamiltonian systems via a $\bbbz_{p}$ pseudoindex theory. Annali di Matematica Pura (to appear) % \bibitem[Ra1]{rab} Rabinowitz, P.: On subharmonic solutions of a Hamiltonian system. Comm. Pure Appl. Math. {\bf 33} (1980) 609--633 \end{thebibliography} % \subsubsection*{Number-Only System.} % For this system do not use the optional argument in the \verb|\bibitem| command: then, only numbers will appear for the citations in the text (enclosed in square brackets) as well as for the marks in your bibliography (here the number is only end-punctuated without square brackets). \begin{verbatim} \begin{thebibliography}{1} \bibitem[CE1]{clar:eke} Clarke, F., Ekeland, I.: Nonlinear oscillations and boundary-value problems for Hamiltonian systems. Arch. Rat. Mech. Anal. {\bf 78} (1982) 315--333 \end{thebibliography} \end{verbatim} % \end{document}