% \iffalse meta-comment % % Copyright (C) 2013-2021 by Walter Daems % % This work may be distributed and/or modified under the conditions of % the LaTeX Project Public License, either version 1.3 of this license % or (at your option) any later version. The latest version of this % license is in: % % http://www.latex-project.org/lppl.txt % % and version 1.3 or later is part of all distributions of LaTeX % version 2005/12/01 or later. % % This work has the LPPL maintenance status `maintained'. % % The Current Maintainer of this work is Walter Daems. % % This work consists of the files listed in the file manifest.txt. % % \fi % % \iffalse %<*driver> \ProvidesFile{uantwerpendocs.dtx} % %<@@=uantwerpendocs> %\NeedsTeXFormat{LaTeX2e}[1999/12/01] %\ProvidesFile{uantwerpencommonoptions.clo} %\ProvidesPackage{uantwerpencolorlogoscheme} %\ProvidesClass{uantwerpencoursetext} %\ProvidesClass{uantwerpenmasterthesis} %\ProvidesClass{uantwerpenbamathesis} %\ProvidesClass{uantwerpenphdthesis} %\ProvidesClass{uantwerpenreport} %\ProvidesClass{uantwerpenletter} %\ProvidesClass{uantwerpenexam} %\ProvidesPackage{beamerthemeuantwerpen} % [2021/08/03 v4.1 .dtx skeleton file] %\errmessage{This class is obsolete, use the uantwerpenbamathesis class instead !} \def\fileversion{4.1} \def\filedate{2021/08/03} %<*driver> \documentclass[a4paper]{ltxdoc} \usepackage{makeidx} \usepackage{alltt} \usepackage{booktabs} \usepackage{metalogo} \IfFileExists{tocbibind.sty}{\usepackage{tocbibind}}{} \IfFileExists{hyperref.sty}{\usepackage[bookmarksopen]{hyperref}}{} \EnableCrossrefs \CodelineIndex \RecordChanges \begin{document} \DocInput{uantwerpendocs.dtx} \end{document} % % \fi % % \CheckSum{0} % % \CharacterTable % {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z % Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z % Digits \0\1\2\3\4\5\6\7\8\9 % Exclamation \! Double quote \" Hash (number) \# % Dollar \$ Percent \% Ampersand \& % Acute accent \' Left paren \( Right paren \) % Asterisk \* Plus \+ Comma \, % Minus \- Point \. Solidus \/ % Colon \: Semicolon \; Less than \< % Equals \= Greater than \> Question mark \? % Commercial at \@ Left bracket \[ Backslash \\ % Right bracket \] Circumflex \^ Underscore \_ % Grave accent \` Left brace \{ Vertical bar \| % Right brace \} Tilde \~} % % % \changes{v1.0}{2013/05/11}{\@ Consolidated uacoursetext class and % uamasterthesis class} % \changes{v1.1}{2013/05/29}{\@ Small bugfixes and 'filled' option} % \changes{v1.2}{2014/08/22}{\@ Added lmodern package and increased % headheight to 13.7pt to please Fancyhdr} % \changes{v1.3}{2015/12/31}{\@ Minor bugfixes, abondonment of a few % packages, font freedom} % \changes{v1.4}{2016/01/07}{\@ Implemented uantwerpenletter class} % \changes{v1.5}{2016/01/11}{\@ Replaced bottom arcs in footer of % letter by official PDF versions} % \changes{v1.6}{2016/02/04}{\@ Added diploma codes for Faculty of % Applied Economics} % \changes{v1.7}{2016/05/01}{\@ Added babel translations of elements % of master's thesis title page} % \changes{v1.8}{2017/01/08}{\@ Corrected minor typographic mistakes, % added signature and solved problems with shell escape} % \changes{v1.81}{2017/01/08}{\@ Bugfixes for release v1.8} % \changes{v1.9}{2018/03/02}{\@ Integrated uantwerpenexam class into % package} % \changes{v2.0}{2018/05/16}{\@ Implemented uantwerpenphdthesis class % into package} % \changes{v2.1}{2018/06/20}{\@ Bugfix release after promotion event % on research day} % \changes{v2.2}{2018/10/23}{\@ Improved visibility of chapter numbers % by adding a white outline} % \changes{v2.3}{2019/03/27}{\@ Reworked masterthesis to bamathesis and minor bug fixes} % \changes{v2.4}{2019/04/10}{\@ Added option for diploma without specialization for EM} % \changes{v3.0}{2021/02/05}{\@ Adapted to the new house style of % UAntwerpen and added a beamer template} % \changes{v3.1}{2021/03/21}{\@ Renamed generic images to be unique % for TexLive distribution} % \changes{v3.2}{2021/03/21}{\@ Small bugfixes (e.g., frame numbering % instead of page numbering)} % \changes{v4.0}{2021/07/11}{\@ Last update of house style (phdthesis % coursetext and bamathesis), added uantwerpenreport class, % improvements based on use feedback % and major rework to benefit from expl3, removed all diploma codes % to ease maintainability} % \changes{v4.1}{2021/08/03}{\@ Adapted coursetext again to % universitas agreement + added bleed version for phd texts + small bugfixes} % % \DoNotIndex{\newcommand,\newenvironment,\begin,\bfseries,\draw,\clip,\else,\fi,\if,\fill,\filldraw,\ifthenelse,\ifx,\textwidth,\node,\\,\@empty,\@emptymacro,\@tempdima,\@tempdimb,\@tempswatrue,\{,\},\ ,\bf,\BODY,\break,\Alph,\and,\define@key,\color,\dx,\dy,\g,\gdef,\hbox,\tiny,\scriptsize,\footnotesize,\small,\normalsize,\large,\Large,\LARGE,\huge,\Huge,\l,\LaTeX,\let,\p@,\relax,\renewcommand,\Requirepackage,\textbf,\textsf,\texttt,\textbackslash,} % \setlength{\parindent}{0em} % \addtolength{\parskip}{0.5\baselineskip} % % \title{The |uantwerpendocs| classes\thanks{This document % corresponds to \texttt{uantwerpendocs}~\fileversion, dated % \filedate.}~\thanks{Thanks to Paul Levrie for testing and proofreading.}} % \author{Walter Daems (|walter.daems@uantwerpen.be|)} % \date{\filedate} % % \maketitle % % \section{Introduction} % % This package implements the house style of Universiteit Antwerpen % (version 2021) for letters, course texts, master/PhD theses, reports and % slides (beamer). It also implements a class to format exams. % Using these class files will make it easy for you to make and keep % your course texts and theses compliant to this version and future % versions of the UAntwerpen house style. % % If you think (1) there's an error in compliancy w.r.t. the house % style, (2) there's a feature missing in this class or theme file, or % (3) there's a bug in this package, please, contact me through e-mail % (|walter.daems@uantwerpen.be|) about the issue. % I'll provide you with an answer and if (and as soon as) possible % with a solution to the problem you spotted. % % Do you like these class files? You're welcome to send us beer, wine, % or just kind words. % % \section{Synopsis} % The |coursetext|, |bamathesis| and |phdthesis| % classes\footnote{For readability the class names have been % abbreviated by omitting the |uantwerpen| prefix} are % an extension of the standard \LaTeX{} |book| class. They are % intended to be used for writing course texts and master's or PhD % theses. They provides a title page that is compliant to the % UAntwerpen house style, and they also typeset the rest of your % document appropriately. % % The |report| class is derived from the standard \LaTeX{} % |report| class. It is intended for writing generic (e.g. research or % educational) reports. % The |letter| class is derived from the standard \LaTeX{} % |letter| class. It is intended to be used for writing business % letters. It is compliant to the house style and allows for using % windowed envelopes of the DL format, with right-aligned window. % % The |exam| class is derived from the standard \LaTeX{} % |article| class. % % The slides come under the form of a custom beamer theme. % % \begin{center} % \framebox[0.95\textwidth]{ % \begin{minipage}{0.92\textwidth} % The documentation of the class files for letters, course texts % theses, and exams can be found in this document. % % The documentation for the beamer theme is embedded in the % demo/user-guide presentation % |beamerthemeuantwerpenuserguide.pdf|. % % Template files for all of the formats can be found below in % section~\ref{sec:basicusage}. % \end{minipage} % } % \end{center} % % Using this package, requires the following packages: % \begin{itemize} % \item the |adjustbox| package % \item the |babel| package % \item the |background| package % \item the |color| package % \item the |environ| package % \item the |eso-pic| package % \item the |etooblox| package % \item the |expl3| package % \item the |fancyhdr| package % \item the |geometry| package % \item the |graphicx| package % \item the |iftex| package % \item the |ifthen| package % \item the |tikz| package % \item the |ulem| package % \item the |xparse| package % \end{itemize} % So make sure these packages are available to your % \LaTeX{} compiler. % % You will notice that as of version 4.0 |expl3| and |xparse| are part % of the game. Indeed, the uantwerpendocs package will be slowly % refactored to \LaTeX3{} to prepare for a package that is easier to % maintain. However, the \LaTeX3{} constructs are never exposed to the % user of the classes. So: don't worry about it! % % % \section{A note on fonts} % % The house style of the University of Antwerp recommends using % \begin{itemize} % \item Prenton RP Pro for the logos and sublogos; all the logoware is % included in this package, so nothing to worry about. % \item ITC Officina Sans for posters, titlepages, cards a.s.o.\\ % This font is not a part of the \LaTeX{} standard fonts. % It is also not provided with this package. I cannot do % this without incurring legal problems (the font is not free). % However, if you have a valid license, for % this font, I can help you to set it up, such that you can typeset % proper title pages for course texts, PhD theses and the like. Just % send me an e-mail. % \item Calibri for office-like documents. Just load the |\fontspec| % package and issue a |\setmainfont{Calibri}| and you're all set. % \end{itemize} % % Adhering to these fonts is recommended, but not % enforced. Personally, I always use a Palatine serif font for my courses. % I did not find any better (free) font yet. My second favorite is % still the original computer modern font by Donald E. Knuth. You are % reading it right now. % % % \section{Portability} % These class files should be ready to use with all common modern \LaTeX{} % compilers (PDF\LaTeX{}, \XeLaTeX{}, \LuaLaTeX{}, \ldots) % from the major \TeX{}-distributions (TeTeX, TexLive, MikTeX). % However, using an old \LaTeX{} + dvips setup is likely to get you into font % problems. Advice: ditch the route via dvi. If you experience other % problems, please inform the author. % % \section{Usage} % % \subsection{Basic Usage} % \label{sec:basicusage} % Use the templates provided below. Remember to \LaTeX{} your source % file twice. % % Especially in the beamer theme some features require to run \LaTeX{} % twice in order to get the position of some elements correct. % % \subsubsection{\texttt{uantwerpencoursetext} class} % Use the following harness for your \LaTeX{} course text: % \begin{verbatim} % \documentclass[ti,a4paper]{uantwerpencoursetext} % % \usepackage{} % % \title{} % \subtitle{} % \author{} % % \courseversion{} % \versionyear{} % % \lecturer{} % \degree{} % \course{}{} % % \academicyear{} % % \begin{document} % % \maketitle % % % put your LaTeX code here % % \finalpage % % \end{document} % \end{verbatim} % % As of version 4.0: % \begin{itemize} % \item the faculty is specified as an option to the |\documentclass| % construct. You can find the available options in % section~\ref{sec:classopt}. % \item you are reponsible yourself to provide the correct % degree description! Maintaining the a correct list of UAntwerpen % bachelor and master programs with all their specializations is % beyond my ambition. % \end{itemize} % % \subsubsection{\texttt{uantwerpenbamathesis} class} % Use the following harness for your \LaTeX{} bachelor or master's % thesis: % \begin{verbatim} % \documentclass[ti,a4paper]{uantwerpenbamathesis} % % \usepackage{} % % \title{} % \author{} % \supervisor{}{} % \supervisor{}{} % \supervisor{}{} % \supervisor{}{} % % % classmarker % \academicyear{} % % \begin{document} % % \maketitle % % % put your LaTeX code here % % \finalpage % % \end{document} % \end{verbatim} % % The available faculty options are listed in a table on page % \pageref{sec:classopt}. % % \subsubsection{\texttt{uantwerpenletter} class} % Use the following harness for your \LaTeX{} letter: % \begin{verbatim} % \documentclass[a4paper,ti]{uantwerpenletter} % % % setup fonts according to your specific TeX compiler setup % % \usepackage{} % % % \logo{} only specify if you want to use your unit's logo % % \sender{}{} % \unit{} % \address{} % \email{}{} % \phone{} % \fax{} % \mobile{} % \returnaddress{} % % \to{} % \toorganization{} % \toaddress{} % % \date{} % \subject{} % % \begin{document} % % \maketitle % generates top of the letter % % \opening{Dear } % % % % \closing{Kind regards,} % % \carboncopy{} % \enclosed{} % % \end{document} % \end{verbatim} % % The available faculty options are listed in a table on page % \pageref{sec:classopt}. You may use lists in the |\carboncopy| and % |\enclosed| commands. The spacing will be compact. % % \subsubsection{\texttt{uantwerpenphdthesis} class} % % \begin{verbatim} % \documentclass[ti,10pt,twoside,openright,filled]{uantwerpenphdthesis} % % You may want to use common fonts % \usepackage{} % % \title{} % \author{} % \affiliation{} % \address{} % % \supervisor{}{} % \supervisor{}{} % % \jurychairman{}{} % % \jurymember{}{} % \jurymember{}{} % \jurymember{}{} % % \degree{} % \defenselocation{} % \defensedate{} % \titlepageimage{} % % \isbn{} % \depot{} % % \begin{document} % % \maketitle % \frontmatter % \tableofcontents % \mainmatter % % % write your PhD text here % % \appendix % % % write appendix material here % % \makefinalpage % % \end{document} % \end{verbatim} % % The available faculty options are listed in a table on page % \pageref{sec:classopt}. % % \subsubsection{\texttt{uantwerpenreport} class} % % \begin{verbatim} % \documentclass[ti,10pt,twoside,openright,filled]{uantwerpenreport} % % You may want to use common fonts % \usepackage{} % % \title{} % \author{} % \affiliation{} % \address{} % % \titlepageimage{} % % \begin{document} % % \maketitle % \frontmatter % \tableofcontents % \mainmatter % % % write your PhD text here % % \appendix % % % write appendix material here % % \makefinalpage % % \end{document} % \end{verbatim} % % The available faculty options are listed in a table on page % \pageref{sec:classopt}. % % \subsubsection{\texttt{uantwerpenbeamer} theme} % % % \begin{verbatim} % \documentclass[aspectratio=1610]{beamer} % % options that select the proper faculty in the beamertheme: % % be, fbd, ggw, lw, ow, re, sw, ti, we, iob (no option = mother % % theme) % \usetheme[ti]{uantwerpen} % \usepackage[dutch]{babel} % % \title{This is your title} % \subtitle{This is your subtitle - omit if you don't need this} % \date{This is the date - will be today if omitted} % \author{This is your name - omit if you don't need this} % % \begin{document} % % \begin{frame}[negativefill] % \maketitle % \end{frame} % % \begin{frame} % {Advice} % {\ldots is cheap} % Search for the \texttt{beamerthemeuantwerpenuserguide.pdf} for % more info (or the corresponding \texttt{.tex} file! % \end{frame} % % \end{document} % \end{verbatim} % % \subsection{The class options explained} % \label{sec:classopt} % The classes have several options. They are listed below. % After every option, it has been indicated to which class the option % applies (between square brackets, without prefix uantwerpen). % \changes{v1.1}{2013/05/28}{Added option user documentation} % % \DescribeMacro{xx(x)} [letter / coursetext / bamathesis / phdthesis % / report / beamertheme]\\ % \begin{center}\small % \begin{tabular}{cp{10cm}} % \toprule % Option & Faculty \\ % \midrule % |be| & Faculty of Business and Economics\\ % & Faculteit Bedrijfswetenschappen en Economie\\ % |fbd| & Faculty of Pharmaceutical, Biomedical and Veterinary Sciences\\ % & Faculteit Farmaceutische, Biomedische en Diergeneeskundige % Wetenschappen\\ % |ggw| & Faculty of Medicine and Health Sciences\\ % & Faculteit Geneeskunde en Gezondheidswetenschappen\\ % |lw| & Faculty of Arts \\ % & Faculteit Letteren en Wijsbegeerte\\ % |ow| & Faculty of Design Sciences\\ % & Faculteit Ontwerpwetenschappen\\ % |re| & Faculty of Law\\ % & Faculteit Rechten\\ % |sw| & Faculty of Social Sciences\\ % & Faculteit Sociale Wetenschappen\\ % |ti| & Faculty of Applied Engineering\\ % & Faculteit Toegepaste Ingenieurswetenschappen\\ % |we| & Faculty of Science\\ % & Faculteit Wetenschappen\\ % |iob| & Institute of Development Policy\\ % & Instituut voor Ontwikkelingsbeleid- en beheer\\ % \bottomrule % \end{tabular} % \end{center} % % \DescribeMacro{cameraready} [phdthesis/coursetext]\\ % For the |phdthesis| class, this option forces the book format to be % printed on A4 with bleed space. This accomodates what your printshop % requires you to provide as a camera-ready copy. % % For the |coursetext| class, this options removes the colored areas % and the logo from the titlepage (and removes the finalpage % altogether) to allow for universitas to print the text of your % titlepage on a standard sheet that contains these colored areas and % the logo (pre-printed). % % \DescribeMacro{copyright} [coursetext]\\ % This option forces printing a watermark on every page. For the % paper version of your document, this is inappropriate, but for any % e-copy you make available, this may be appropriate; % % \DescribeMacro{examiner} [exam]\\ % This option allows to set the exam class in examiner mode, % mentioning the examiner mode on every page (as regular text in the % header and also in a watermark) to make sure you never hand out % that copy to students and suppressing the fillout pages. % % \DescribeMacro{filled} [letter / coursetext / % bamathesis / phdthesis / report]\\ % This option causes the text to be filled (simultaneous left and % right alignment). Though this setting is not recommended, it is % provided because the default |\raggedright| cannot be undone. The % |filled| option prevents the |\raggedright| from being % issued. However, if you care about the typographic readability of % your text, you shouldn't use this option. % % Common sets of options depend on the purpose: % \begin{itemize} % \item to make a text ready for electronic distribution: % |a4paper|, |copyright|. % \item to make a camera-ready text (for printing): % |a4paper| % \item to make a camera-ready coursetext (for printing at % universitas): % |a4paper|,|cameraready| % \item to make a letter: % no options (filling a letter is discouraged) % \item to make an exam: % no options (filling an exam is discouraged) % \item to make a PhD text: % |twoside|, |openright| and (optionally) |filled| % \item to make a camera-ready PhD text: % |twoside|, |openright|, |cameraready| and (optionally) |filled| % \item to make a report: % |twoside|, |openright| and (optionally) |filled| % \end{itemize} % % \subsection{The macros explained} % % \subsubsection{Macros for the coursetext, bamathesis, phdthesis % classes} % % \DescribeMacro{\academicyear} [coursetext / bamathesis] % (mandatory)\\ % Use this macro to specify the academic year in full, i.e. in the % form |XXXX-YYYY|. % % \DescribeMacro{\author} [coursetext / bamathesis / phdthesis / % report ] (mandatory)\\ % This macro sets the author of the document. % It also sets the |pdfauthor| tag of the hyperref package (if it is % loaded), so that % the PDF-document meta-information is correct. % % \DescribeMacro{\copyrightnotices} [coursetext / report] % (optional)\\ % Use this macro to specify additional copyright notice messages to % appear in the copyright notice on the bottom of page 2 of your % course text. % % \DescribeMacro{\course} [coursetext] (mandatory)\\ % \label{dm-course} % Code (first argument) and name (second argument) of the curriculum % course this coursematerial or exam belongs to. The code should be of % the form:\\ % |TNNNFFFAAA|, % with: % \begin{center} % \begin{tabular}{cp{10cm}} % \toprule % Code & Explanation \\ % \midrule % |T| & a number indicating the type of programme \\ % & (1 for Bachelor courses, 2 for Master courses , 5 for % specific courses of preparatory programmes) \\ % |NNN| & a number assigned by the Faculty's administration\\ % |FFF| & the acronym of your Faculty, e.g., FTI\\ % |AAA| & an alphanumeric code assigned by the Faculty's % administration \\ % \bottomrule % \end{tabular} % \end{center} % % An example of such a code: 1001FTIWIS, for the first-semester % mathematics course of the Faculty of Applied Engineering. % % \DescribeMacro{\courseversion} [coursetext] (optional)\\ % This macro indicates which version of the course this is. % % % \DescribeMacro{\defensedate} [bamathesis / phdthesis] (mandatory)\\ % Date of the bamathesis defense in Dutch, in the form 'month year', % e.g. ``juni 2012''. In case of a PhD thesis, only the year should be % mentioned. % % \DescribeMacro{\defenselocation} [bamathesis / phdthesis] % (optional)\\ % Location of the defense. Defaults to ``Antwerpen''. % % % \changes{v1.6}{2016/02/04}{Added diploma code documentation} % \changes{v2.0}{2018/05/16}{Updated diploma code documentation to % incorporate PhD degrees} % \changes{v2.3}{2019/03/27}{Introduced bachelor level codes to allow % for bachelor theses} % \changes{v4.0}{2021/07/11}{Removed diploma codes, as too many % faculties are requesting to maintain them} % \DescribeMacro{\diploma} [bamathesis] (discontinued)\\ % This macro is no longer used. Use |\degree{}| instead. % % \DescribeMacro{\lecturer} [coursetext] (mandatory)\\ % You can add one or more lecturers to the course notes (in % Dutch: titularis). If there are multiple persons, please, use the % macro multiple times. % % \DescribeMacro{\phddegree} [phdthesis] (discontinued)\\ % This macro is no longer used. Use |\degree{}| instead. % % \DescribeMacro{\degree} [bmthesis,phdthesis,coursetext] (mandatory)\\ % This is the official degree name (in the appropriate language, % possibly mixed ``dutch (english)''). % Specify the official title of your diploma. This must be the % official title. For bachelor and master programmes in Dutch, it must % be the Dutch title. For programmes in English ti may be the English % title. For PhD degrees, language constraints are less strict.\\ % Consult \url{https://www.hogeronderwijsregister.be} for correct % bachelor and master degree titles. Consult the Doctoral bylaws of % the university for correct PhD degree titles. % % \DescribeMacro{\programme} [coursetext] (discontinued)\\ % This macro is no longer used. Use |\degree{}| instead.% % % \DescribeMacro{\publisher} [coursetext] (mandatory)\\ % This macro sets the publisher information of the document. % It is printed on the front page. It defaults to the repographic % service of campus Groenenborger, one of the standard printing % services of Universiteit Antwerpen. Separate the different fields % (name, addres, a.s.o) using a pipe symbol. % % \DescribeMacro{\publishercode} [coursetext] (mandatory)\\ % This macro sets the publisher code of the document. % It is printed on the front page. This is code that the publisher % uses for its internal administration. It may be a proprietary code, % or an ISBN number. % % \DescribeMacro{\subtitle} [coursetext / phdthesis / report] (optional)\\ % This macro sets the title of the document. You may use this % \begin{itemize} % \item to further clarify the title % \item to indicate the nature of this document % \end{itemize} % The latter is to be considered when you want to provide multiple % documents as parts of the full course text (e.g., Course Notes, % Formula Collection, Exercise Book, Solution Book). % This macro also sets the |subject| tag of the hyperref package (if % it is loaded), % so that the PDF-document meta-information is correct. % % \DescribeMacro{\supervisor} [bamathesis / phdthesis] (mandatory)\\ % Specifies the person(s) that promote(s)/supervise(s) the thesis. % Please, use the macro multiple times if needed. % % \DescribeMacro{\title} [coursetext / bamathesis / phdthesis / % report] (mandatory)\\ % This macro sets the title of the document. % It also sets the |pdftitle| tag of the hyperref package (if it is % loaded), so that % the PDF-document meta-information is correct. % % \DescribeMacro{\titlepageimage} [phdthesis / report] % (optional)\\ % This sets the filename of the central image on the title page to % appear clipped % within the curves. For PhD theses this is highly % advized. For course texts, this is optional. If the image is not % set, a flat colored area will appear. This is part of the house % style. % % \DescribeMacro{\versionyear} [coursetext / report] (mandatory)\\ % This is to be the year in which you published the current version of % the course in the form YYYY. % % % \subsubsection{Macros for the letter class} % % \DescribeMacro{\address} [letter] (mandatory)\\ % Address of the sending unit (or faculty). This can be different from % the return address. Newlines are allowed and encouraged. % % \DescribeMacro{\carboncopy} [letter] (optional)\\ % List of persons receiving a copy of this letter. Format at will. % % \DescribeMacro{\closing} [letter] (mandatory) \\ % Closing clause of the letter. E.g. 'Best regards,'. % % \DescribeMacro{\date} [letter] (optional) \\ % Date of the letter. If not specified today's date (at the time of % running \LaTeX{}) will be used. % % \DescribeMacro{\email} [letter] (optional)\\ % E-mail address of the sending person, or the administrative person % tracking the letter. This must definitely be someone that can answer % questions related to this letter. % \begin{itemize} % \item first argument: user name % \item second argument: domain name % \end{itemize} % % \DescribeMacro{\enclosed} [letter] (optional)\\ % List of enclosed documents. Format at will. % % \DescribeMacro{\fax} [letter] (optional)\\ % Probably facsimile is not used anymore, but anyway: fax number of % the sending person. See also |\email|. % % \DescribeMacro{\logo} [letter] (optional)\\ % file name of an alternative logo to use. The file name must be the % name of a file in the search path of type PDF. % If this macro is not used, The default logo of the university or % your faculty/institute will % be used. % % \DescribeMacro{\mobile} [letter] (optional)\\ % Mobile phone number of the sending person. See also |\email|. % % \DescribeMacro{\opening} [letter] (mandatory) \\ % Opening address of the letter. E.g. 'Dear X,'. % % \DescribeMacro{\phone} [letter] (optional)\\ % Phone number of the sending person. See also |\email|. % % \DescribeMacro{\returnaddress} [letter] (mandatory)\\ % This is a short return address (listed in small font on top of the % destination address (such that it is visible in a windowed envelope % (European format)). It should fit on a single line. Typically we list % an acronym for the unit, a room number, a campus name and address. % The goal is to get the undelivered letter back to the person that % can take action accordingly. % % \DescribeMacro{\sender} [letter] (mandatory)\\ % Description of the person writing the letter. % \begin{itemize} % \item first argument: name of the person writing the letter % \item second argument: title / role of the person % \end{itemize} % Newlines are not allowed in the arguments. % % \DescribeMacro{\signature} [letter] (optional) \\ % Add a signature (in between the closing statement of the % letter and the sender's name. This might be a text message or a % picture of your signature. % % \DescribeMacro{\subject} [letter] (mandatory) \\ % Short descriptive subject that describes the contents of the % letter. % % \DescribeMacro{\to} [letter] (mandatory)\\ % Name of the addressee. Newlines are allowed. % Preferably name and role are split over two lines. % % \DescribeMacro{\toaddress} [letter] (mandatory)\\ % Address of the addressee. Newlines are allowed. The address should % fit on max. 3 lines. % % \DescribeMacro{\toorganization} [letter] (optional)\\ % Name of the organization that employs the addressee. % % \DescribeMacro{\unit} [letter] (optional)\\ % Name of the unit to which the person belongs. This can be a % research group, a laboratory, an administrative division, etc. % Newlines are allowed. % % \subsubsection{Macros for the exam class} % % \DescribeMacro{\author} [exam] (mandatory)\\ % The author of the exam (may be multiple authors, separated by % commas). On the title page, these will be labeled as 'Professor(s) - % Titularis(sen)'. % % \DescribeMacro{\academicyear} [exam] (mandatory)\\ % Use this macro to specify the academic year in full, i.e. in the % form |XXXX-YYYY|. % % \DescribeMacro{\course} [exam] (mandatory)\\ % see description of |\course| macro on page~\pageref{dm-course}. % % \DescribeMacro{\degree} [exam] (mandatory)\\ % This is the official degree name (in the appropriate language, % possibly mixed ``dutch (english)''). % Specify the official title of your diploma. This must be the % official title. For bachelor and master programmes in Dutch, it must % be the Dutch title. For programmes in English ti may be the English % title. For PhD degrees, language constraints are less strict.\\ % Consult \url{https://www.hogeronderwijsregister.be} for correct % bachelor and master degree titles. Consult the Doctoral bylaws of % the university for correct PhD degree titles. % % \DescribeMacro{\examdate} % specifies the date of the exam. We recommend the YYYY-MM-DD format, % but you are free to chose your own coding scheme for dates. We % advize against using UNIX epoch time, to avoid problems in the first % semester exams in 2038. % % \DescribeMacro{\examgroupnumber} [exam]\\ % mentions the group number (may be empty) % % \DescribeMacro{\examlength} % specifies the length of the exam in a unit of time, e.g. '4h' % % \DescribeMacro{\exampart} [exam] (mandatory)\\ % Description of the part of the course the exam covers. % Often the evaluation of a course consists of multiple evaluation % elements (e.g. a written exam, a portfolio defense and lab % reports). Using this macro you can indicate the part this exam % covers. E.g. it could be 'Written Exam' (to distinguish from the % other parts 'portfolio defense' and 'lab reports'). % % \DescribeMacro{\extrainfo} % specifies the extra information that appears on the back of the % title page, regarding the materials that can be used during the % examination and cautioning the students not to commit fraude. % You can specify an optional first argument 'firstpage', such that % your extra info starts on the first page, below the title block. In % that case the extra info will also not be terminated with a % clearpage (as we assume you want to conserve space). % % \DescribeMacro{\lecturer} [exam] (mandatory)\\ % You can add one or more lecturers to the course notes (in % Dutch: titularis). If there are multiple persons, please, use the % macro multiple times. % % \DescribeMacro{\programme} [exam] (discontinued)\\ % This macro is no longer used. Use |\degree{}| instead.% % % \DescribeMacro{\room} % specifies the rooms in which the exam will take place. This is % useless info for the student, but may be of convenience for you as % author or supervisor of the exam. Use UAntwerpen standard room % designators, e.g. 'G.U.025' for room number 025, on the % Groenenborgercampus in the U-building. % If your exam is taken in multiple rooms, just specify multiple % |\room{}| commands. % % \DescribeMacro{\studentnr} % specifies the exam copy number. This will appear on every page of % the exam, easing the reassembly of pages that do not contain any % name. Moreover, it allows for blind correction as the student only % writes his name ot he front page. % % \DescribeMacro{\tend} % specifies the end time of the exam in a format identical to the one % chosen for |\tstart|. % % \DescribeMacro{\tstart} % specifies the start time of the exam, preferrable in the format % 'HHhMM', e.g. '08h30'. % % \subsection{Examples} % \subsubsection{\texttt{uantwerpencoursetext}} % % \changes{v2.5}{}{changed publisher to universitas in example} % % \begin{verbatim} %<*ct-example> \documentclass[ti,a4paper,11pt,oneside,openright,cameraready]{uantwerpencoursetext} \usepackage[english,dutch]{babel} \usepackage{kantlipsum} % this is just for some dummy text, please remove \title{Z\'agen, zoeken en zuchten} \subtitle{Cursusnota's} \author{Walter Daems en Paul Levrie} \courseversion{1.3} \versionyear{2021} \lecturer{Zoltan Zo\"ekers} \lecturer{Siana Sigh} \lecturer{Zeger de Z\'ager} \degree{Master of Science in de industri\"ele wetenschappen: elektronica-ICT} \course{2023FTIZZZ}{5-Zoekmachines in een zaagperspectief} \course{2045FTIIII}{6-Zaagmachines in \'e\'en zuchtperspectief} \academicyear{2021-2022} \publisher{Universitas Cursusdienst | Prinsesstraat 16 | 2000 Antwerpen | T +32 3 233 23 73 | E info@cursusdienst.be} \publishercode{C11111102} \copyrightnotices{ The graphics in this document have been typeset using \texttt{TikZ}.\\ This document has been \TeX-ed on a GNU/Linux workstation. } \begin{document} \maketitle \frontmatter \tableofcontents \mainmatter \chapter*{Inleiding} \kant[1] \chapter{Onzin voor dummies} \section{Het gebeuren} \kant[2] \begin{equation} e^{-j\pi} + 1 = 0 \end{equation} \kant[3] \section{En waartoe het geleid heeft} \kant[4] \subsection{Herhaling} \kant[5] \subsection{Begint vervelend te worden} \kant[6] \newpage \subsection{Begint echt vervelend te worden} \kant[7-10] \chapter{Besluit} \appendix \chapter{Symbolen} \chapter{Romeinse sprekers} \chapter{Referentielijst} \makefinalpage \end{document} % % \end{verbatim} % % % \subsubsection{\texttt{uantwerpenbamathesis}} % % \begin{verbatim} %<*bmt-example> \documentclass[a4paper,11pt,twoside,openright,english,ti]{uantwerpenbamathesis} \usepackage[dutch]{babel} % or english if your text is in English \usepackage{kantlipsum} % this is just for some dummy text, please remove \usepackage[backref,hyperindex=true,pagebackref=true]{hyperref} % New: you must load the hyperref package % yourself! This allows you to put it in the % correct order with the other packages you load! \title{Minimax optimisatie voor performantieruimtemodellering} \author{Bert Bibber} \supervisor{prof. dr. ir. Kumulus}{Universiteit Antwerpen} \supervisor{prof. dr. Hilarius Warwinkel}{TNT-Bang, N.V.} \supervisor{ing. Piet Pienter}{POM} \academicyear{2021-2022} \degree{Bachelor of Science in de industri\"ele wetenschappen - elektronica-ICT} \defenselocation{Antwerpen} \defensedate{juni 2021} \begin{document} \maketitle \frontmatter \tableofcontents \mainmatter \chapter*{Inleiding} \kant[1] \chapter{Onderzoeksvraag} \section{Het gebeuren} \kant[2] \begin{equation} e^{-j\pi} + 1 = 0 \end{equation} \kant[3] \chapter{Literatuurstudie} \chapter{Theoretische achtergrond} \chapter{Eigen realisatie} \chapter{Besluit} \appendix \chapter{Symbolen} \chapter{Referentielijst} \makefinalpage \end{document} % % \end{verbatim} % % % \subsubsection{\texttt{uantwerpenphdthesis}} % % \paragraph{Dutch} % \begin{verbatim} %<*pt-example1> \documentclass[ti,10pt,twoside,openright,filled]{uantwerpenphdthesis} % You may want to use common fonts \usepackage{mathptmx} \iftutex \usepackage{fontspec} \setmainfont{Calibri} \setsansfont{Calibri} \else \usepackage{cmbright} \fi \usepackage[dutch]{babel} % or dutch if your text is in Dutch \usepackage{kantlipsum} % this is just for some dummy text, please remove \usepackage[backref,hyperindex=true,pagebackref=true]{hyperref} % New: you must load the hyperref package % yourself! This allows you to put it in the % correct order with the other packages you load! \title{Harmonische Signaalanalyse\\met behulp van Lineaire Operatoren} \subtitle{Waarom moeten titels van doctoraatsthesissen toch altijd lang en onverstaanbaar zijn?} \author{Ing. Theofiel Hoekaff} \affiliation{Universiteit Antwerpen\\ Faculteit Toegepaste Ingenieurswetenschappen\\ Co-design of Cyber-Physical Systems (Cosys-Lab)} \address{Groenenborgerlaan 171, 2020 Antwerpen, Belgi\"e\\ M: theofiel.hoekaff@uantwerpen.be\\ T: +32 265 00 00 } \supervisor{prof. dr. W. Vlaams}{Universiteit Antwerpen, Belgi\"e} \supervisor{prof. dr. J. Stekker}{Universiteit Antwerpen, Belgi\"e} \jurychairman{prof. dr. P. Dalinckx}{Universiteit Antwerpen, Belgi\"e} \jurymember{prof. dr. J. Dezerooder}{Universiteit Antwerpen, Belgi\"e} \jurymember{prof. dr. P. De Tollenaere}{Flanders Make, Belgi\"e} \jurymember{prof. dr. M. Byr}{IMEC, Nederland} \degree{doctor in de toegepaste ingenieurswetenschappen} \defenselocation{Antwerpen} \defensedate{2021} \titlepageimage{Images/uantwerpen-keyboard.jpg} \isbn{987-90-57285-34-7} % don't specify this if you don't want one \depot{D/2021/12.293/03} % idem \begin{document} \maketitle \frontmatter \tableofcontents \mainmatter \chapter*{Inleiding} \kant[1] \chapter{Onderzoeksvraag} \section{Het gegeven} \kant[2] \begin{equation} e^{-j\pi} + 1 = 0 \end{equation} \kant[3-17] \chapter{Literatuurstudie} \kant[18-19] \chapter{Theoretische achtergrond} \kant[20-21] \chapter{Eigen realisatie} \kant[22-24] \chapter{Besluit} \kant[25] \appendix \chapter{Symbolen} \chapter{Publicaties} % Put your bibliography here using BibTeX \makefinalpage \end{document} % % \end{verbatim} % % \paragraph{English} % \begin{verbatim} %<*pt-example2> \documentclass[ti,10pt,twoside,openright,filled,cameraready]{uantwerpenphdthesis} % use some fancy font \usepackage{newpxtext} \usepackage{newpxmath} \usepackage[english]{babel} % or dutch if your text is in Dutch \usepackage{kantlipsum} % this is just for some dummy text, please remove \usepackage[backref,hyperindex=true,pagebackref=true]{hyperref} % New: you must load the hyperref package % yourself! This allows you to put it in the % correct order with the other packages you load! \title{Harmonic Signal analysis \\based on Linear Operators} \subtitle{How did Mindy linearly kill Mork's IC signal analyzer?} \author{Ing. Theodore Edgeoff} \affiliation{University of Antwerp\\ Faculty of Applied Engineering\\ Cosys-Lab} \address{Groenenborgerlaan 171, 2020 Antwerpen, Belgi\"e\\ M: theofiel.hoekaff@uantwerpen.be\\ T: +32 265 00 00 } \supervisor{prof. dr. W. Vlaams}{University of Antwerp, Belgium} \supervisor{prof. dr. J. Stekker}{University of Antwerp, Belgium} \jurychairman{prof. dr. P. Dalinckx}{University of Antwerp, Belgium} \jurymember{prof. dr. J. Dezerooder}{University of Antwerp, Belgium} \jurymember{prof. dr. P. De Tollenaere}{Flanders Make, Belgium} \jurymember{prof. dr. M. Byr}{IMEC, The Netherlands} \degree{doctor in applied engineering} \defenselocation{Antwerpen} \defensedate{2021} \titlepageimage{Images/uantwerpen-keyboard.jpg} \isbn{987-90-57285-34-7} \depot{D/2021/12.293/03} \begin{document} \maketitle \frontmatter \tableofcontents \mainmatter \chapter*{Introduction} \kant[1] \chapter{Research question} \section{The datum} \kant[2] \begin{equation} e^{-j\pi} + 1 = 0 \end{equation} \kant[3-17] \chapter{Literature review} \kant[18-19] \chapter{Theoretical background} \kant[20-21] \chapter{Technical results} \kant[22-24] \chapter{Conclusion} \kant[25] \appendix \chapter{Symbols} % Put your bibliography here using BibTeX \makefinalpage \end{document} % % \end{verbatim} % % \subsubsection{\texttt{uantwerpenreport}} % % \begin{verbatim} %<*rp-example> \documentclass[10pt,twoside,openright,filled]{uantwerpenreport} % You may want to use common fonts \usepackage{mathptmx} \iftutex \usepackage{fontspec} \setmainfont{Calibri} \setsansfont{Calibri} \usepackage{sansmathaccent} \else \usepackage{cmbright} \fi \usepackage[dutch]{babel} % or dutch if your text is in Dutch \usepackage{kantlipsum} % this is just for some dummy text, please remove \usepackage[backref,hyperindex=true,pagebackref=true]{hyperref} % New: you must load the hyperref package % yourself! This allows you to put it in the % correct order with the other packages you load! \title{De toepassing van roomijs-derivaten in beton} \subtitle{Het belang van een smaakvolle architectuur} \author{Ing. Jan Bouwblauw} \extra{Onderzoeksrapport} \affiliation{Universiteit Antwerpen | Building Research Group} \address{Groenenborgerlaan 171, 2020 Antwerpen, Belgi\"e\\ M: jan.bouwblauw@uantwerpen.be\\ T: +32 265 00 00 } \versionyear{2021} \titlepageimage{Images/uantwerpen-keyboard.jpg} \begin{document} \maketitle \frontmatter \tableofcontents \mainmatter \chapter*{Inleiding} \kant[1] \chapter{Smaken en smaakpapillen} \section{Het gegeven} \kant[2] \begin{equation} e^{-j\pi} + 1 = 0 \end{equation} \kant[3-17] \chapter{Experimentele setup} \kant[18-19] \chapter{Resulaten} \kant[20-21] \chapter{Conclusie} \kant[22-24] \chapter{Advies} \kant[25] \appendix \chapter{Symbolen} \chapter{Publicaties} % Put your bibliography here using BibTeX \makefinalpage \end{document} % % \end{verbatim} % % % \subsubsection{\texttt{uantwerpenletter}} % % \paragraph{Plain example} % % \begin{verbatim} %<*le-example> \documentclass[ti,a4paper]{uantwerpenletter} %% As a good UAntwerpen citizen, you would use the calibri font. %% As this only works for XeLaTeX or LuaLaTeX, we chose to include %% cmbright in any other case. \iftutex \usepackage{fontspec} \setmainfont{Calibri} \else \usepackage{cmbright} \fi \usepackage[english]{babel} \usepackage{kantlipsum} % this is just for some dummy text, please remove \sender{prof. Walter Daems}{Senior Lecturer} \unit{Cosys-Lab} \address{ Campus Groenenborger\\ Groenenborgerlaan 171\\ B-2020 Antwerpen\\ BELGIUM} \email{walter.daems}{uantwerpen.be} \phone{+32 3 265 98 43} \mobile{+32 499 355 115} \returnaddress{FTI - U.301 -- Groenenborgerlaan 171, 2020 Antwerpen, BELGIUM} \to{prof. B. Bonette} \toorganization{Mumford University} \toaddress{ 450 Morning Mall\\ Mumford, DX 94305-2004\\ USA} \date{January 3, 2016} \subject{Congratulations for online video lectures} \begin{document} \maketitle \opening{Dear prof. Bonette,} I'd like to congratulate you and the other professors of your university on the very instructive video lectures provided by your University. They are valued very highly. You inspired many a professor at our university to provide more technical content beyond classical paper courses. Based on your inspiring lectures, some students desire to candidate themselves for taking an internship at your university. You can find their details enclosed. Below, you can find a few more paragraphs to illustrate that this class can generate multipage letters. \kant[1-3] \closing{Kind regards,} % you might want to insert a signature picture or text: % \signature{\includegraphics{signature.jpg}} \carboncopy{prof. S. Mariotte, Mumford University} \enclosed{ \begin{enumerate} \item list of course numbers that are most fequently viewed at our university (1pp) \item a list of students desiring to take an internship at Mumford University (2pp) \end{enumerate} } \end{document} % % \end{verbatim} % % \paragraph{Example with configuration file}~\\ % Probably, one has to write many letters. The sender details will be % most certainly valid for many an occasion. Therefore, you might want % to consider putting this default setup in a configuration file, % e.g. \texttt{uantwerpenletter.cfg}: % % \begin{verbatim} %<*le-cfg> %% configuration file for uantwerpenletter class \iftutex \usepackage{fontspec} \setmainfont{Calibri} \else \usepackage{cmbright} \fi \sender{prof. Walter Daems}{Senior Lecturer} \unit{Cosys-Lab} \address{ Campus Groenenborger\\ Groenenborgerlaan 171\\ B-2020 Antwerpen\\ BELGIUM} \email{walter.daems}{uantwerpen.be} \phone{+32 3 265 98 43} \mobile{+32 499 355 115} \returnaddress{FTI - U.301 -- Groenenborgerlaan 171, 2020 Antwerpen, BELGIUM} % % \end{verbatim} % % The file can then be loaded in the preamble of your letter: % \begin{verbatim} % \input{uantwerpenletter.cfg} % \end{verbatim} % % After loading this configuration file, you may override some % elements if this is appropriate. % % You may also consider using multiple configuration files in case you % have multiple roles in the university. Just make sure they are on your % \LaTeX\ search path. % % \subsubsection{\texttt{uantwerpenexam}} % % Below you can find two examples: % \begin{itemize} % \item A single column layout (single language) exam % \item A double column layout (English-Dutch) exam % \end{itemize} % If you require more language combinations, aks the author to % implement this. % % \paragraph{Single column} % \begin{verbatim} %<*ex-example1> \documentclass[ti,a4paper,10pt]{uantwerpenexam} \usepackage{newpxtext} % demonstration of some fine font packages \usepackage{newpxmath} \usepackage{enumitem} \usepackage[dutch]{babel} % last language loaded will % determine logo version (change to % [dutch] for a monolingual version) \course{1876FTIDUM}{5-Bistrologie} \author{Walter Daems} % can be omitted if 'lecturers' are sufficient \lecturer{Walter Daems} \degree{Bachelor of Science in de industri\"ele wetenschappen - elektronica-ICT} \academicyear{2017-2018} \exampart{Schriftelijk Examen} \examgroupnumber{1 (eerste examenkans-inhaal)} \examdate{2018-01-29} \examlength{4h} \tstart{08h30} \tend{12h30} \room{G.U.025} \extrainfo[firstpage]{ Belangrijke informatie:\\\par Het volledige Onderwijs- en Examenregelement (OER) is van toepassing op dit examen. Toch wil ik vooraf nog een aantal regels duidelijk stellen: \begin{enumerate} \item Mogen op je tafeltje aanwezig zijn: (1) schrijfgerief, los d.w.z. \emph{niet} in een pennenzak (geen papier; er zit examenpapier bij de opgaven), (2) je rekenmachine (zonder alfanumerieke data en zonder geheugenkaarten), (3) het formularium. \item Volledig \emph{verboden te gebruiken}: alle apparatuur met geheugen- of communicatiefunctionaliteit zoals GSM, smartphone, smartwatch, muziekspeler, \ldots Je tas staat vooraan in het lokaal. Hang je jas aan de kapstok of leg hem bij je tas. \item Schrijf je naam op het titelblad van de opgave in het daartoe voorziene vak. Op de andere bladen schrijf je je naam \emph{niet}. Je examenopgave heeft een uniek nummer dat toelaat het te identificeren. \item Op het einde van het examen geef je \emph{alle} bladen weer af aan de aanwezige docent. \end{enumerate} Succes! } \studentnr{127} \setmcsymbol{\bigcirc} \begin{document} \maketitle \question{[VLATOP-BISTRO]} \questionweight{3} Geef de eerste vijf laureaten van de VLATOP-bistro competitie. \question{[BECHAMEL]} \questionweight{7} Welk van de onderstaande ingredi\"enten hoort niet thuis in een b\'echamel saus: \mc{Melk} \mc{Boter} \mc{Bloem} \mc{Eieren} \mc{Suiker} \insertsolutionspagepartial{2} \insertsolutionspage{} \clearpage \question{[BISTROCULTURE-1]} \questionweight{10} \begin{enumerate}[label=\alph*)] \item Bespreek de evolutie van de Noord-Europese bistrocultuur gedurende de laatste vijftig jaar. \item Breng dit in relatie tot de opkomst van de georganiseerde recensies zoals die van Michelin en Gault-Millau. \end{enumerate} \insertsolutionspagepartial{23} \foreach \i in {1,2,3} { \insertsolutionspage{} } \foreach \i in {1,2} { \insertsolutionspage{Kladpapier} } \end{document} % % \end{verbatim} % % \paragraph{Two columns} % \begin{verbatim} %<*ex-example2> \documentclass[ti,a4paper,10pt]{uantwerpenexam} \usepackage{newpxtext} % demonstration of some fine font packages \usepackage{newpxmath} \usepackage{enumitem} \usepackage[dutch,english]{babel} % last language loaded will % determine logo version (change to % [dutch] for a monolingual version) \course{1876FTIDUM}{5-Bistrology} \lecturer{Walter Daems} \lecturer{Paul Levrie} \degree{Bachelor of Science in de industri\"ele wetenschappen - elektronica-ICT} \academicyear{2017-2018} \exampart{Written Exam} \examgroupnumber{1 (eerste examenkans-inhaal)} \examdate{2018-01-29} \examlength{4h} \tstart{08h30} \tend{12h30} \room{G.U.025} \room{G.U.026} \extrainfo{ \engdut{ Important information:\\\par The Education and Examination Regulations (EER) hold for this examination in full. However, before starting, I'd like to set some rules straight: } { Belangrijke informatie:\\\par Het volledige Onderwijs- en Examenregelement (OER) is van toepassing op dit examen. Toch wil ik vooraf nog een aantal regels duidelijk stellen: } \engdut{ \begin{itemize} \item \emph{Can be used:} (1) writing gear (\emph{not} in a pencil case); you don't need paper; there's plenty of paper in your exam copy; (2) your calculator (without alphanumerical data and without memory cards); (3) the formula collection. \end{itemize} } { \begin{itemize} \item Mogen op je tafeltje aanwezig zijn: (1) schrijfgerief, los d.w.z. \emph{niet} in een pennenzak (geen papier; er zit examenpapier bij de opgaven), (2) je rekenmachine (zonder alfanumerieke data en zonder geheugenkaarten), (3) het formularium. \end{itemize} } \engdut{ \begin{itemize} \item \emph{May not be used:} all equipment with memory or communications facilities, like cell phones, smart phones, smart watches, music players, \ldots Your bag must be put in the front of the room. Put your coat on the hallstand or next to your bag. \end{itemize} } { \begin{itemize} \item Volledig \emph{verboden te gebruiken}: alle apparatuur met geheugen- of communicatiefunctionaliteit zoals GSM, smartphone, smartwatch, muziekspeler, \ldots Je tas staat vooraan in het lokaal. Hang je jas aan de kapstok of leg hem bij je tas. \end{itemize} } \engdut{ \begin{itemize} \item Write your name on the title page. Don't write your name on the subsequent pages. Your copy has a unique number to identify it as yours. \end{itemize} } { \begin{itemize} \item Schrijf je naam op het titelblad van de opgave in het daartoe voorziene vak. Op de andere bladen schrijf je je naam \emph{niet}. Je examenopgave heeft een uniek nummer dat toelaat het te identificeren. \end{itemize} } \engdut{ \begin{itemize} \item Take your time to \emph{answer all questions in writing}. The point weights are listed above every question. Be complete in your answer, but stick to the point. Take into account the available time. \end{itemize} } { \begin{itemize} \item Neem je tijd om \emph{alle vragen schriftelijk te beantwoorden}. Het puntengewicht van een vraag is bovenaan de vraag op de opgavebladen vermeld. Wees volledig in je antwoord, maar ter zake. Houd rekening met de beschikbare tijd. \end{itemize} } \engdut{ \begin{itemize} \item Hand in \emph{all} papers to the staff member on duty, at the end of the examination. \end{itemize} Success! } { \begin{itemize} \item Op het einde van het examen geef je \emph{alle} bladen weer af aan de aanwezige docent. \end{itemize} Succes! } \clearpage } \studentnr{29} \begin{document} \maketitle \question{[VLATOP-BISTRO]} \questionweight{3} \engdut{ Write down the first five laureates of the VALTOP-bistro competition. } { Geef de eerste vijf laureaten van de VLATOP-bistro competitie. } \question{[BECHAMEL]} \questionweight{7} \engdut{ Which of the ingredients below does not belong in a b\'echamel sauce: } { Welk van de onderstaande ingredi\"enten hoort niet thuis in een b\'echamel saus: } \engdutmc{Milk}{Melk} \engdutmc{Butter}{Boter} \engdutmc{Flower}{Bloem} \engdutmc{Eggs}{Eieren} \engdutmc{Sugar}{Suiker} \insertsolutionspagepartial{20} \insertsolutionspage{} \clearpage \question{[BISTROCULTURE-1]} \questionweight{10} \engdut{ \begin{enumerate}[label=\alph*)] \item Discuss the evolution of the Northern European bistro culture during the latest fifty years. \item Relate this to the rise of organized reviews like the ones of Michelin and Gault-Millau. \end{enumerate} } { \begin{enumerate}[label=\alph*)] \item Bespreek de evolutie van de Noord-Europese bistrocultuur gedurende de laatste vijftig jaar. \item Breng dit in relatie tot de opkomst van de georganiseerde recensies zoals die van Michelin en Gault-Millau. \end{enumerate} } \insertsolutionspagepartial{22.5} \foreach \i in {1,2,3} { \insertsolutionspage{} } \foreach \i in {1,2} { \insertsolutionspage{Scrap/Klad} } \end{document} % % \end{verbatim} % % \StopEventually{\clearpage\PrintChanges\clearpage\PrintIndex} % % \section{Implementation of the classes} % % % \subsection{Common options} % % Colors appear in any document, so let's define them in common in a % separate package % \begin{macrocode} %<*clo> \newif\if@neutralcolors \@neutralcolorsfalse \DeclareOption{neutralcolors}{\@neutralcolorstrue} \newcommand*\colormodel{rgb} \newif\if@cmyk \@cmykfalse \DeclareOption{cmyk}{\renewcommand*\colormodel{cmyk}\@cmyktrue} \DeclareOption{rgb}{\renewcommand*\colormodel{rgb}\@cmykfalse} \newcommand*\facinenglish[1]{\renewcommand\@faculty{#1}} \newcommand*\facindutch[1]{ \AtBeginDocument{ \makeatother \@ifpackageloaded{babel}{ \addto\captionsdutch{\renewcommand*\@faculty{#1}} }{} \makeatletter } } \newcommand*\fselector{ua} \newcommand*\lselector{en} \newlength\logounitheight \setlength\logounitheight{0.8cm} \newcommand*\@faculty{~} \DeclareOption{be}{ \renewcommand*\fselector{be} \setlength\logounitheight{1cm} \facinenglish{Faculty of Business and Economics} \facindutch{Faculteit Bedrijfswetenschappen en Economie} } \DeclareOption{fbd}{ \renewcommand*\fselector{fbd} \setlength\logounitheight{1cm} \facinenglish{Faculty of Pharmaceutical, Biomedical and Veterinary Sciences} \facindutch{Faculteit Farmaceutische, Biomedische en Diergeneeskundige Wetenschappen} } \DeclareOption{ggw}{ \renewcommand*\fselector{ggw} \setlength\logounitheight{1cm} \facinenglish{ Faculty of Medicine and Health Sciences} \facindutch{Faculteit Geneeskunde en Gezondheidswetenschappen} } \DeclareOption{lw}{ \renewcommand*\fselector{lw} \setlength\logounitheight{1cm} \facinenglish{Faculty of Arts} \facindutch{Faculteit Letteren en Wijsbegeerte} } \DeclareOption{ow}{ \renewcommand*\fselector{ow} \setlength\logounitheight{1cm} \facinenglish{Faculty of Design Sciences} \facindutch{Faculteit Ontwerpwetenschappen} } \DeclareOption{re}{ \renewcommand*\fselector{re} \setlength\logounitheight{1cm} \facinenglish{Faculty of Law} \facindutch{Faculteit Rechten} } \DeclareOption{sw}{ \renewcommand*\fselector{sw} \setlength\logounitheight{1cm} \facinenglish{Faculty of Social Sciences} \facindutch{Faculteit Sociale Wetenschappen} } \DeclareOption{ti}{ \renewcommand*\fselector{ti} \setlength\logounitheight{1cm} \facinenglish{Faculty of Applied Engineering} \facindutch{Faculteit Toegepaste Ingenieurswetenschappen} } \DeclareOption{we}{ \renewcommand*\fselector{we} \setlength\logounitheight{1cm} \facinenglish{Faculty of Science} \facindutch{Faculteit Wetenschappen} } \DeclareOption{iob}{ \renewcommand*\fselector{iob} \setlength\logounitheight{1cm} \facinenglish{Institute of Development Policy} \facindutch{Instituut voor Ontwikkelingsbeleid- en beheer} } \newcommand*\@facultyacronym{\expandafter\uppercase\expandafter{\fselector}} \AtBeginDocument{ \makeatother \@ifpackageloaded{babel}{ \addto\captionsdutch{ \renewcommand*\lselector{nl} }{} } \makeatletter \newcommand*\logopos{Logos/logo-uantwerpen-\fselector-\lselector-\colormodel-pos} \newcommand*\logoposua{Logos/logo-uantwerpen-ua-\lselector-\colormodel-pos} \newcommand*\logoneg{Logos/logo-uantwerpen-\fselector-\lselector-\colormodel-neg} \newcommand*\logonegua{Logos/logo-uantwerpen-ua-\lselector-\colormodel-neg} \newcommand*\logomonowhite{Logos/logo-uantwerpen-\fselector-\lselector-\colormodel-mono-white} \newcommand*\logomonowhiteua{Logos/logo-uantwerpen-ua-\lselector-\colormodel-mono-white} \newcommand*\iconfile{Logos/icon-uantwerpen-\fselector-\colormodel} \newcommand*\iconfileua{Logos/icon-uantwerpen-ua-\colormodel} } % % \end{macrocode} % % \subsection{Color scheme} % \begin{macrocode} %<*cls> \if@cmyk %% UAntwerpen \definecolor{uauamain}{cmyk}{0.00,0.96,0.82,0.01} \definecolor{uauaside}{cmyk}{1.00,0.71,0.00,0.51} %% Faculteit Bedrijfswetenschappen en Economie \definecolor{uabemain}{cmyk}{0.58,0.00,1.00,0.04} \definecolor{uabeside}{cmyk}{0.29,0.04,0.41,0.00} %% Faculteit Farmaceutische, Biomedische en Diergeneeskundige Wetenschappen \definecolor{uafbdmain}{cmyk}{0.65,0.03,0.00,0.00} \definecolor{uafbdside}{cmyk}{0.33,0.03,0.00,0.00} %% Faculteit Geneeskunde en Gezondheidswetenschappen \definecolor{uaggwmain}{cmyk}{0.61,0.55,0.00,0.00} \definecolor{uaggwside}{cmyk}{0.21,0.27,0.03,0.00} %% Faculteit Letteren en Wijsbegeerte \definecolor{ualwmain}{cmyk}{0.00,0.27,0.85,0.00} \definecolor{ualwside}{cmyk}{0.00,0.16,0.51,0.00} %% Faculteit Ontwerpwetenschappen \definecolor{uaowmain}{cmyk}{0.53,0.25,0.26,0.05} \definecolor{uaowside}{cmyk}{0.25,0.08,0.16,0.00} %% Faculteit Rechten \definecolor{uaremain}{cmyk}{0.10,1.00,0.90,0.05} \definecolor{uareside}{cmyk}{0.04,0.45,0.36,0.00} %% Faculteit Sociale Wetenschappen \definecolor{uaswmain}{cmyk}{0.08,0.00,1.00,0.26} \definecolor{uaswside}{cmyk}{0.20,0.11,0.50,0.00} %% Faculteit Toegepaste Ingenieurswetenschappen \definecolor{uatimain}{cmyk}{0.31,1.00,0.00,0.01} \definecolor{uatiside}{cmyk}{0.11,0.30,0.02,0.00} %% Faculteit Wetenschappen \definecolor{uawemain}{cmyk}{1.00,0.20,0.00,0.25} \definecolor{uaweside}{cmyk}{0.40,0.08,0.00,0.10} %% IOB \definecolor{uaiobmain}{cmyk}{0.05,0.75,1.00,0.00} \definecolor{uaiobside}{cmyk}{0.40,0.08,0.00,0.10} \else %% UAntwerpen \definecolor{uauamain}{RGB}{234,44,56} \definecolor{uauaside}{RGB}{0,46,101} %% Faculteit Bedrijfswetenschappen en Economie \definecolor{uabemain}{RGB}{101,168,18} \definecolor{uabeside}{RGB}{185,213,169} %% Faculteit Farmaceutische, Biomedische en Diergeneeskundige Wetenschappen \definecolor{uafbdmain}{RGB}{68,184,243} \definecolor{uafbdside}{RGB}{181,221,247} %% Faculteit Geneeskunde en Gezondheidswetenschappen \definecolor{uaggwmain}{RGB}{117,117,203} \definecolor{uaggwside}{RGB}{198,182,210} %% Faculteit Letteren en Wijsbegeerte \definecolor{ualwmain}{RGB}{241,181,61} \definecolor{ualwside}{RGB}{255,218,145} %% Faculteit Ontwerpwetenschappen \definecolor{uaowmain}{RGB}{130,161,173} \definecolor{uaowside}{RGB}{200,217,216} %% Faculteit Rechten \definecolor{uaremain}{RGB}{210,8,36} \definecolor{uareside}{RGB}{237,157,144} %% Faculteit Sociale Wetenschappen \definecolor{uaswmain}{RGB}{173,165,0} \definecolor{uaswside}{RGB}{215,211,148} %% Faculteit Toegepaste Ingenieurswetenschappen \definecolor{uatimain}{RGB}{177,0,151} \definecolor{uatiside}{RGB}{221,184,210} %% Faculteit Wetenschappen \definecolor{uawemain}{RGB}{0,108,169} \definecolor{uaweside}{RGB}{151,192,223} %% IOB \definecolor{uaiobmain}{RGB}{230,98,8} \definecolor{uaiobside}{RGB}{151,192,223} \fi %% \if@neutralcolors \colorlet{maincolor}{uauaside} \colorlet{sidecolor}{uauamain} \colorlet{basecolor}{uauaside} \else \colorlet{maincolor}{ua\fselector main} \colorlet{sidecolor}{ua\fselector side} \colorlet{basecolor}{uauaside} \fi % % \end{macrocode} % % \subsection{Class inheritance} % % % For convenience, we'll derive from the standard \LaTeX{} |book|, % |letter| and |article| class. % % \changes{v1.0}{2013/05/11}{Added option titlepagetableonly} % \changes{v1.0}{2013/05/11}{Added option titlepagenoartwork} % \changes{v1.0}{2013/05/11}{Added option qr} % \changes{v1.4}{2016/01/07}{Implemented letter class} % \changes{v1.9}{2018/03/02}{Implemented uantwerpenexam class} % \changes{v2.0}{2018/03/02}{Implemented uantwerpenphdthesis class} % \changes{v4.0}{2021/05/01}{Removed option qr again} % \changes{v4.0}{2021/07/11}{Removed options titlepagetableonly and % titlepagenoartwork} % \changes{v4.1}{2021/08/03}{Added option cameraready} % % Before loading the class, we provide the extra options. % % \begin{macrocode} %<*ct> \newif\if@modern \@modernfalse \DeclareOption{modern}{\@moderntrue} % %<*ct|rp> \newif\if@copyright \DeclareOption{copyright}{\@copyrighttrue} % % %<*ct|bmt|pt|rp|le> \newif\if@filled \DeclareOption{filled}{\@filledtrue} % % %<*ex> \newif\if@examiner \DeclareOption{examiner}{\@examinertrue} % %<*ct|pt> \newif\if@cameraready \DeclareOption{cameraready}{\@camerareadytrue} % % \end{macrocode} % % % We execute some standard options: % We load the |book| class for course texts and master theses. % \begin{macrocode} %<*ct|bmt|pt|rp> \input{uantwerpencommonoptions.clo} \ExecuteOptions{a4paper,11pt,final,oneside,openright} \ProcessOptions\relax \LoadClassWithOptions{book} % % We load the |letter| class for letters %<*le> \input{uantwerpencommonoptions.clo} \ExecuteOptions{a4paper,10pt,final,oneside,openright} \ProcessOptions \LoadClassWithOptions{letter} \newcommand*\tat{\makeatletter @\makeatother} % % We load the |article| class for exams %<*ex> \input{uantwerpencommonoptions.clo} \ExecuteOptions{a4paper,twoside,10pt} \ProcessOptions \LoadClassWithOptions{article} % % \end{macrocode} % % \subsection{Modern typesetting} % Let's force some modern typesetting without paragraph indentation % and with a decent paragraph spacing. % % \begin{macrocode} %<*ct|bmt|pt|rp|le|ex> \setlength{\parindent}{0pt} \addtolength{\parskip}{0.75\baselineskip} \setcounter{secnumdepth}{3} % % \end{macrocode} % % \subsection{Auxiliary packages} % Reinventing the wheel is a waste of time, let's preload some % appropriate auxiliary packages that have proven their value. % % \subsubsection{Geometry} % Let's reduce the margins to 1 inch each for the documents that are % unlikely to be glue bound: % \begin{macrocode} %<*ct|bmt|rp|ex> \RequirePackage[top=2.5cm, bottom=2.5cm, left=2.5cm, right=2.5cm]{geometry} % % Let's follow the instructions by ADS for the (marginal(!) glue provision): %<*pt> \RequirePackage[paperwidth=180mm,paperheight=260mm, top=2.5cm,bottom=2.5cm,left=2.6cm,right=1.8cm,twoside] {geometry} % %<*le> \RequirePackage[top=1in, bottom=1in, left=1.34in, right=1in]{geometry} \RequirePackage[normalem]{ulem} % % \end{macrocode} % % \subsubsection{Preparing for \LaTeX3} % Let's make things a bit easier for me. % \begin{macrocode} %<*ct|bmt|pt|rp|le|ex> \RequirePackage{expl3} %\RequirePackage[check-declarations]{expl3} % I use this during debug phase \RequirePackage{xparse} % % \end{macrocode} % % \subsubsection{Font packages} % Note that the use of cmbright is no % longer imposed (as of v1.3). Using a good font is now up to the % user. The packages 'newpxtext/newpxmath' and 'cmbright' are highly % recommended. % For writing letters, 'Calibri' is the official font of the % University of Antwerp. % \changes{v1.2}{2014/08/22}{Added lmodern package to please MikTeX} % \changes{v1.3}{2015/12/31}{Abandoned use of cmbright - no more % font dictatorship for theses and courses} % \begin{macrocode} %<*ct|bmt|pt|rp|le> % no more font code % % \end{macrocode} % % \subsubsection{Boilerplate packages} % % Some boilerplate packages and an empty macro to test against % (using|\ifx|) % \changes{v1.8}{2017/01/08}{Added missing packages ifmtarg and % shellesc} % \changes{v1.81}{2017/01/09}{Apparently shellesc is still missing from % quite a number of installations, therefore, conditional loading} % \changes{v1.9}{2018/03/02}{Added etoolbox for convenience reasons} % \changes{v2.0}{2018/03/14}{Removed package ifmtarg because % unreliable} % \changes{v3.0}{2021/02/05}{Added iftex} % \begin{macrocode} %<*ct|bmt|pt|rp|le|ex> \RequirePackage{iftex} \RequirePackage{xstring} \RequirePackage{etoolbox} \RequirePackage{ifthen} \IfFileExists{shellesc.sty}{\RequirePackage{shellesc}}{} \newcommand{\@emptymacro}{} % % \end{macrocode} % % \subsubsection{Graphics packages} % % Graphics packages that are required for the title page, but may come % in handy for regular use as well. % % Some packages for coursetext and bamathesis: % \changes{v1.3}{2015/12/31}{Added inclusion of background package} % \begin{macrocode} %<*ct|bmt|pt|rp|le|ex> \RequirePackage{graphicx} \RequirePackage[export]{adjustbox} \RequirePackage{color} \RequirePackage{tikz} \usetikzlibrary{positioning} \RequirePackage{eso-pic} % %<*ct|rp> \if@copyright \RequirePackage[contents={},color=lightgray,scale=3]{background} \fi % %<*pt> \usepackage{ean13isbn} % % \end{macrocode} % % \subsubsection{UAntwerpen color and logo scheme} % \begin{macrocode} %<*ct|bmt|pt|rp|le|ex> \RequirePackage{uantwerpencolorlogoscheme} % % \end{macrocode} % \subsubsection{Header/Footer} % % The de-facto standard for headers and footers: % \begin{macrocode} %<*ct|bmt|pt|rp|le|ex> \RequirePackage{fancyhdr} % % \end{macrocode} % % \subsection{Colors} % % \begin{macrocode} %<*ct|bmt|pt|rp|le|ex> \definecolor{uacorpbord}{cmyk} {0.00,1.00,0.60,0.37} \definecolor{uacorpblue}{cmyk} {1.00,0.25,0.00,0.50} \definecolor{uacorplightblue}{cmyk}{1.00,0.00,0.08,0.13} \definecolor{uacorporange}{cmyk} {0.00,0.32,1.00,0.09} \definecolor{uaftifresh}{cmyk} {0.34,1.00,0.00,0.00} \definecolor{uaftisober}{cmyk} {0.10,1.00,0.00,0.49} \definecolor{lightgray}{cmyk} {0.00,0.00,0.00,0.05} \definecolor{darkgray}{cmyk} {0.00,0.00,0.00,0.80} \definecolor{watermark}{cmyk} {0.00,0.00,0.00,0.05} % % \end{macrocode} % % \subsection{Camera-ready version} % \changes{v4.1}{2021/08/03}{Added cameraready option} % For the course texts, this means printing no artwork (as universitas % prints your front page on a pre-printed color page) % This is taken care of by the titlepage and finalpage environments, % so no extra code is needed here. % % For PhD texts, this means providing bleed space. We implemented this % using the very fine |crop| package. % \begin{macrocode} %<*pt> \if@cameraready \RequirePackage[cam,center,width=21truecm,height=29.7truecm]{crop} \fi % % \end{macrocode} % % \subsection{Babel provisions} % % \changes{v1.7}{2016/05/01}{Added babel tags of elements % of master's thesis title page} % \changes{v4.0}{2021/05/01}{Total rewrite of this part based on % expl3} % Let's start by defining our dictionary: % \begin{macrocode} %<*ct|bmt|pt|rp|le|ex> \ExplSyntaxOn \prop_new:N \g_@@_data_prop %% % \end{macrocode} % % The dictionary can be accessed using the following document command: % \begin{macrocode} %<*ct|bmt|pt|rp|le|ex> \NewDocumentCommand{\uantwerpendocsprop}{m}{ \prop_item:Nn \g_@@_data_prop{#1} } \NewDocumentCommand{\uantwerpendocsPROP}{m}{ \str_uppercase:f { \prop_item:Nn \g_@@_data_prop{#1} } } \NewDocumentCommand{\uantwerpendocspropread}{m}{ \@@_datareader:n { #1 } } %% % \end{macrocode} % % We will fill the dictionary from the generic data file (for elements % that should not be translated, currently empty) and the language % specific data files (for elements that can be translated). % % To this end, we use the following parsing infrastructure: % \begin{macrocode} %<*ct|bmt|pt|rp|le|ex> \cs_generate_variant:Nn \prop_gput:Nnn{ Nxx } \cs_new_nopar:Npn \@@_dataparser:w #1 = #2!! { \tl_set:Nn \l_tmpa_tl {#1} \tl_set:Nn \l_tmpb_tl {#2} \tl_trim_spaces:N \l_tmpa_tl \tl_trim_spaces:N \l_tmpb_tl \prop_gput:Nxx \g_@@_data_prop { \l_tmpa_tl} { \l_tmpb_tl } } % % \end{macrocode} % invoked by the following data file reader: % \begin{macrocode} %<*ct|bmt|pt|rp|le|ex> \ior_new:N \l_@@_data_ior \cs_new_nopar:Nn \@@_datareader:n { \ior_open:Nn \l_@@_data_ior { uantwerpendocs-#1.data } \ior_str_map_inline:Nn \l_@@_data_ior { \regex_match:nnTF {=} {##1} { \@@_dataparser:w ##1!! } {} } \ior_close:N \l_@@_data_ior } % % \end{macrocode} % By default, we load the generic (not yet!) and the english data file: % \begin{macrocode} %<*ct|bmt|pt|rp|le|ex> \clist_map_inline:nn {en} { \@@_datareader:n { #1 } } %\prop_show:N \g_@@_data_prop \ExplSyntaxOff % % \end{macrocode} % % \begin{macrocode} %<*ct|bmt|pt|rp|le|ex> \newcommand*\@logo{\logopos} \AtBeginDocument{ \makeatother \@ifpackageloaded{babel}{ \addto\captionsenglish{% \uantwerpendocspropread{en} } \addto\captionsdutch{% \uantwerpendocspropread{nl} } } {} \makeatletter } % % \end{macrocode} % % The English data can be found below: %<*endata> org-be = Faculty of Business and Economics org-fbd = Faculty of Pharmaceutical, Biomedical and Veterinary Sciences org-ggw = Medicine and Health Sciences org-lw = Faculty of Arts org-ow = Faculty of Design Sciences org-re = Faculty of Law org-sw = Faculty of Social Sciences org-ti = Faculty of Applied Engineering org-we = Faculty of Science org-iob = Institute of Development Policy org-ua = University of Antwerp arr = All rights reserved of = of domainname = uantwerp.be datename = Date subjectname = Subject acyearname = Academic year baname = Bachelor of Science spname = Switching Programme vpname = Preparatory Programme maname = Master of Science phdname = PhD thesisname = Thesis mthesisname = Master's thesis bthesisname = Bachelor's thesis lecturername = Lecturer lecturersname = Lecturers supervisorname = Supervisor supervisorsname = Supervisors examname = Exam --- Examen seriesname = Series lastname = Last name --- Naam firstname = First name --- Voornaam docketname = Docket No. --- Rolnr. roomname = Room --- Lokaal roomsname = Rooms --- Lokalen examstartname = Start --- Begin examendname = End --- Einde examdurationname = Exam duration --- Duur van het examen juryname = Jury jurymembersname = Members jurychairmanname = Chairman bmthesisname = Thesis to obtain the degree of pthesisnamei = Thesis submitted in fulfilment of the requirements for the degree of pthesisnameii = at University of Antwerp weightname = Weight % % % The Dutch data can be found below: %<*nldata> org-be = Faculteit Bedrijfswetenschappen en Economie org-fbd = Faculteit Farmaceutische, Biomedische en Diergeneeskundige Wetenschappen org-ggw = Faculteit Geneeskunde en Gezondheidswetenschappen org-lw = Faculteit Letteren en Wijsbegeerte org-ow = Faculteit Ontwerpwetenschappen org-re = Faculteit Rechten org-sw = Faculteit Sociale Wetenschappen org-ti = Faculteit Toegepaste Ingenieurswetenschappen org-we = Faculteit Wetenschappen org=iob = Instituut voor Ontwikkelingsbeleid- en beheer org-ua = Universiteit Antwerpen arr = Alle rechten voorbehouden of = van domainname = uantwerpen.be datename = Onderwerp subjectname = Datum acyearname = Academiejaar baname = Bachelor of Science spname = Schakelprogramma vpname = Voorbereidingsprogramma maname = Master of Science phdname = Doctoraat thesisname = Afstudeerproef mthesisname = Masterproef bthesisname = Bachelorproef lecturername = Titularis lecturersname = Titularissen supervisorname = Promotor supervisorsname = Promotoren examname = Examen seriesname = Reeks lastname = Naam firstname = Voornaam docketname = Rolnr. roomname = Lokaal roomsname = Lokalen examstartname = Begin examendname = Einde examdurationname = Duur van het examen juryname = Jury jurymembersname = Leden jurychairmanname = Voorzitter bmthesisname = Proefschrift tot het behalen van de graad van pthesisnamei = Proefschrift voorgelegd tot het behalen van de graad van pthesisnameii = aan de Universiteit Antwerpen te verdedigen door weightname = Gewicht % % \subsection{Tags} % % \begin{macro}{\facultyacronym} % The |facultyacronym| sets the faculty acronym tag % |\@facultyacronym| that is used in the header/footer % information. The correct acronym also sets the faculty's name % correctly. % % \changes{v3.0}{2021/02/05}{Changed REC in RE, TEW in BE and WET in WE % (according to official naming scheme)} % \changes{v4.0}{2021/05/01}{This function is now obsolete} % \begin{macrocode} %<*ct|bmt|pt|rp|le|ex> \newcommand*{\facultyacronym}[1]{ \PackageError{uantwerpendocs} {The '\protect\facultyacronym{}' macro is no longer available. Use your faculty abbreviation in lowercase as class options instead} {The interface of uantwerpendocs 4.0 has been changed. See the uantwerpendocs manual under section '5.2 The class options explained'} } % % \end{macrocode} % \end{macro} % % \begin{macro}{\title} % The |title| tag is native to \LaTeX{}. It sets the |\@title| tag % that will be used on the title page. % \end{macro} % % \begin{macro}{\subtitle} % \changes{v2.1}{2018/06/20}{Added subtitle to phd text} % \changes{v2.1}{2018/06/20}{Ensured that subtitle is really % optional by adding default space value} % This macro sets the |\@subtitle| tag that later will be used on % the title page, in the header/footer and to set the appropriate % |hyperref| tag (if it is loaded). % \begin{macrocode} %<*bmt> \ExplSyntaxOn \NewDocumentCommand{\@subtitle}{m}{ \tl_new:N \l_@@_degree \tl_set:Nx \l_@@_degree { \tl_head:N \@degree } \tl_if_eq:NnTF \l_@@_degree { B } {\uantwerpendocsprop{bthesisname}} { \tl_if_eq:NnTF \l_@@_degree { M } {\uantwerpendocsprop{mthesisname}} {\uantwerpendocsprop{thesisname}}} } \ExplSyntaxOff % %<*ct|pt|rp> \newcommand*{\@subtitle}{~} \newcommand*{\subtitle}[1]{% \renewcommand*\@subtitle{#1} } % % \end{macrocode} % \end{macro} % % \begin{macro}{\shorttitle} % This macro sets the |\@shorttitle| tag that later will be used % in the |exam| class. % \begin{macrocode} %<*ex> \newcommand*{\@shorttitle}{} \newcommand*{\shorttitle}[1]{% \renewcommand*\@shorttitle{#1} } % % \end{macrocode} % \end{macro} % % \begin{macro}{\author} % The |author| tag is native to \LaTeX{}. It sets the |\@author| % tag that will be used on the title page. % \end{macro} % % \begin{macro}{\courseversion} % This macro sets the |\@courseversion| tag that later will be used % on the title page and in the header/footer. % \begin{macrocode} %<*ct> \newcommand*{\@courseversion}{} \newcommand*{\courseversion}[1]{\renewcommand*{\@courseversion}{#1}} % % \end{macrocode} % \end{macro} % % \begin{macro}{\versionyear} % This macro sets the |\@versionyear| tag that later will be used on % the title page and in the copyright message. % \begin{macrocode} %<*ct|rp> \newcommand*{\@versionyear}{} \newcommand*{\versionyear}[1]{\renewcommand*{\@versionyear}{#1}} % % \end{macrocode} % \end{macro} % % \begin{macro}{\publisher} % This macro sets the |\@publisher| tag that later will be used on % the title page. % \changes{v2.5}{}{changed publisher to universitas in default} % \begin{macrocode} %<*ct> \newcommand{\@publisher}{Universitas Cursusdienst | Prinsesstraat 16 | 2000 Antwerpen | T +32 3 233 23 73 | E info@cursusdienst.be} \newcommand*{\publisher}[1]{\renewcommand*{\@publisher}{#1}} % % \end{macrocode} % \end{macro} % % \begin{macro}{\publishercode} % This macro sets the |\@publishercode| tag that later will be used on % the title page. % \begin{macrocode} %<*ct> \newcommand*{\@publishercode}{} \newcommand*{\publishercode}[1]{\renewcommand*{\@publishercode}{#1}} % % \end{macrocode} % \end{macro} % % \begin{macro}{\lecturer} % This macro adds lecturers (Dutch: titularissen) to the course % notes. % Use the macro multiple times for multiple lecturers. The order % will be preserved. % Note that as of v4.0 all lecturers are specified using the same % macro! % \begin{macrocode} %<*ct|ex> \ExplSyntaxOn \seq_new:N \g_@@_lecturers \cs_new:Nn \@@_addlecturer:n { \seq_gpush:Nn \g_@@_lecturers { #1 } } \NewDocumentCommand{\lecturer}{m}{ \@@_addlecturer:n { #1 } } \NewDocumentCommand{\jointlecturers}{m}{ \seq_use:Nn \g_@@_lecturers { #1 } } \NewDocumentCommand{\lecturersname}{}{ \if_int_compare:w \seq_count:N \g_@@_lecturers > 1 \uantwerpendocsprop{lecturersname} \else: \uantwerpendocsprop{lecturername} \fi: } \AtBeginDocument{ \seq_greverse:N \g_@@_lecturers } \ExplSyntaxOff % % \end{macrocode} % \end{macro} % % % \begin{macro}{\extra} % The |extra| tag allows to specify some extra comment (e.g. the % nature of the document) in the bottom bar on the title page). % \begin{macrocode} %<*rp> \newcommand\@extra{} \newcommand\extra[1]{\renewcommand\@extra{#1}} % % \end{macrocode} % \end{macro} % % % \begin{macro}{\affiliation} % The |affiliation| tag allows to specify the affiliation of the author. % \begin{macrocode} %<*pt|rp> \newcommand\@affiliation{ \PackageError{uantwerpendocs} {Please, define the affiliation of the author using the '\protect\affiliation{}' command in the preamble of your document.} {See the uantwerpendocs manual} } \newcommand\affiliation[1]{\renewcommand\@affiliation{#1}} % % \end{macrocode} % \end{macro} % % \begin{macro}{\supervisor} % This macro allows to specify one or more supervisors with their % affiliation. This can be done by invoking the macro as many times % as needed. % Note that as of v4.0 all supervisors are specified using the same % macro! % \begin{macrocode} %<*bmt|pt> \ExplSyntaxOn \seq_new:N \g_@@_supervisors \seq_new:N \g_@@_supervisorswithaffiliation \cs_new:Nn \@@_addsupervisor:nn { \seq_gpush:Nn \g_@@_supervisors { #1 } \seq_gpush:Nn \g_@@_supervisorswithaffiliation { #1,~#2 } } \NewDocumentCommand{\supervisor}{mm}{ \@@_addsupervisor:nn { #1 } { #2 } } \NewDocumentCommand{\jointsupervisors}{m}{ \seq_use:Nn \g_@@_supervisors { #1 } } \NewDocumentCommand{\jointsupervisorswithaffiliation}{m}{ \seq_use:Nn \g_@@_supervisorswithaffiliation { #1 } } \NewDocumentCommand{\supervisorsname}{}{ \if_int_compare:w \seq_count:N \g_@@_supervisors > 1 \uantwerpendocsprop{supervisorsname} \else: \if_int_compare:w \seq_count:N \g_@@_supervisors = 1 \uantwerpendocsprop{supervisorname} \else: \fi: \fi: } \AtBeginDocument{ \seq_greverse:N \g_@@_supervisors \seq_greverse:N \g_@@_supervisorswithaffiliation } \ExplSyntaxOff % % \end{macrocode} % \end{macro} % % \begin{macro}{\jurychairman} % This macro sets the |\@jurychairman| tag that later will be used on % the data page. % \begin{macrocode} %<*pt> \newcommand*{\@jurychairman}{ \PackageError{uantwerpendocs} {Please, define a chairman of the jury using the '\protect\jurychairman{}' command in the preamble of your document.} {See the uantwerpendocs manual} } \newcommand*{\@jurychairmanaff}{} \newcommand*{\jurychairman}[2]{ \renewcommand*{\@jurychairman}{#1}\renewcommand*{\@jurychairmanaff}{#2}} % % \end{macrocode} % \end{macro} % % \begin{macro}{\jurymember} % This macro allows for the registration of jury members and their % affiliation. This can be done by invoking the macro as many times % as needed. % Note that as of v4.0 all jurymembers are specified using the same % macro! % % \begin{macrocode} %<*pt> \ExplSyntaxOn \seq_new:N \g_@@_jurymemberswithaffiliation \cs_new:Nn \@@_addjurymember:nn { \seq_gpush:Nn \g_@@_jurymemberswithaffiliation { #1,~#2 } } \NewDocumentCommand{\jurymember}{mm}{ \@@_addjurymember:nn { #1 } { #2 } } \NewDocumentCommand{\jointjurymembers}{m}{ \seq_use:Nn \g_@@_jurymemberswithaffiliation { #1 } } \AtBeginDocument{ \seq_greverse:N \g_@@_jurymemberswithaffiliation } \ExplSyntaxOff % % \end{macrocode} % \end{macro} % % \begin{macro}{\phddegree} % This macro has been discontinued. Use |\degree| instead. % % \begin{macrocode} %<*pt> \newcommand*\phddegree{ \PackageError{uantwerpendocs} {The '\protect\phddegree{}' macro is no longer available. Use '\protect\degree{}' instead} {The interface of uantwerpendocs 4.0 has been changed. Use the '\protect\degree' macro to specify your degree in full text (see the uantwerpendocs manual)'} } % % % % \begin{macro}{\degree} % This macro sets the |\@degree| tag that later will % be used on the title pages. % % \begin{macrocode} %<*bmt|pt|ct|ex> \newcommand*\@degree{ \PackageError{uantwerpendocs} {Please, specify the offical degree description using the '\protect\degree{}' macro in the preamble of your document.} {See the uantwerpendocs manual} } \newcommand*\degree[1]{\renewcommand*\@degree{#1}} % % \end{macrocode} % \end{macro} % % % \begin{macro}{\programme} % This macro is no longer in use. % % \changes{v2.5}{}{Shortened 'voorbereidingsprogramma' and % 'schakelprogramma' tags} % \changes{v4.0}{}{Discontinued, use |\textbackslash{}degree\{\}| instead} % % \begin{macrocode} %<*ct|pt|ex> \newcommand*{\programme}[3]{ \PackageError{uantwerpendocs} {The '\protect\programme{}{}{}' macro is no longer available. Use '\protect\degree{}' instead} {The interface of uantwerpendocs 4.0 has been changed. Use the '\protect\degree' macro to specify your degree in full text (see the uantwerpendocs manual)'} } % % \end{macrocode} % \end{macro} % % \begin{macro}{\course} % Four the |coursetext| class, this macro sets one or more % courses. % and |\@course| tags that later will be used on the title % page. % Note that as of v4.0 all courses are specified using the same % macro! % \begin{macrocode} %<*ct> \newcommand*\coursei[2]{ PackageError{uantwerpendocs} {The '\protect\coursei{}' macro is no longer available. Use '\protect\course{}' instead (multiple times if you need to)} {The interface of uantwerpendocs 4.0 has been changed. Use the '\protect\course macro instead of the \protect\coursei, \protect\courseii, \protect\courseiii and \protect\courseiv macros that existed earlier (see the uantwerpendocs manual)'} } \ExplSyntaxOn \seq_new:N \g_@@_courseswithcodes \cs_new:Nn \@@_addcourse:nn { \seq_gpush:Nn \g_@@_courseswithcodes{ \texttt{#1}~#2 } } \NewDocumentCommand{\course}{mm}{ \@@_addcourse:nn { #1 } { #2 } } \NewDocumentCommand{\jointcourseswithcodes}{m}{ \seq_use:Nn \g_@@_courseswithcodes { #1 } } \AtBeginDocument{ \seq_greverse:N \g_@@_courseswithcodes } \ExplSyntaxOff % % \end{macrocode} % For the |exam| class (assuming that an exam only holds for a % single course), the situation is simple and we assume only a % single coursecode and course name. % \begin{macrocode} %<*ex> \newcommand*{\@coursecode}{} \newcommand*{\@course}{} \newcommand*{\course}[2]{ \renewcommand*{\@coursecode}{#1} \renewcommand*{\@course}{#2} } % % \end{macrocode} % \end{macro} % % \begin{macro}{\diploma} % This macro sets the official diploma description into the % |\@diploma| tag that later will be used on the title page. % \changes{v1.1}{2013/05/21}{Fixed typo on programme's name % (e-umlaut)} % \changes{v1.6}{2016/02/04}{Added diploma codes} % \changes{v2.3}{2019/03/27}{Added diploma level} % \changes{v2.4}{2019/04/10}{Added code for Master EM without % specialization} % \changes{v4.0}{2021/07/11}{Discontinued: removed all diploma codes} % \begin{macrocode} %<*bmt|pt> \newcommand*{\diploma}[1]{ \PackageError{uantwerpendocs} {The '\protect\diploma{}' macro is no longer available. Use '\protect\degree{}' instead} {The interface of uantwerpendocs 4.0 has been changed. Use the '\protect\degree' macro to specify your degree in full text (see the uantwerpendocs manual)'} } % % \end{macrocode} % \end{macro} % % \begin{macro}{\defensedate} % This macro sets the |\@defensedate| tags that later will % be used on the title page. % \begin{macrocode} %<*bmt|pt> \newcommand*\@defensedate{ERROR} \newcommand*{\defensedate}[1]{\renewcommand*\@defensedate{#1}} % % \end{macrocode} % \end{macro} % % \begin{macro}{\defenselocation} % This macro sets the |\@defenselocation| tags that later will % be used on the title page. % \begin{macrocode} %<*bmt|pt> \newcommand*\@defenselocation{Antwerpen} \newcommand*{\defenselocation}[1]{\renewcommand*\@defenselocation{#1}} % % \end{macrocode} % \end{macro} % % % \begin{macro}{\titeplageimage} % This macro sets the |\@titlepageimage| tags that later will % be used on the title page, to include the graphics. % \begin{macrocode} %<*ct|pt|rp> \newcommand*\@titlepageimage{} \newcommand*\titlepageimage[1]{\renewcommand*\@titlepageimage{#1}} % % \end{macrocode} % \end{macro} % % % \begin{macro}{\isbn} % This macro sets the |\@isbn| tags that later will % be used on the data page. If you don't have an ISBN number, just % don't specify one (i.e. don't use this macro). % \begin{macrocode} %<*pt> \newcommand*{\@isbn}{} \newcommand*{\isbn}[1]{\renewcommand*{\@isbn}{#1}} % % \end{macrocode} % \end{macro} % % \begin{macro}{\depot} % \changes{v2.5}{2019/10/18}{Made the specification of a depot % number optional} % This macro sets the |\@depot| tags that later will % be used on the data page. If you don't have a depot number, just % don't specify one (i.e. don't use this macro). % \begin{macrocode} %<*pt> \newcommand*{\@depot}{} \newcommand*{\depot}[1]{\renewcommand*{\@depot}{#1}} % % \end{macrocode} % \end{macro} % % % \begin{macro}{\academicyear} % This macro sets the |\@academicyear| tag that later will be used on % the title page. % \begin{macrocode} %<*ct|bmt|ex> \newcommand*{\@academicyear}{XXX-YYYY} \newcommand*{\academicyear}[1]{\renewcommand*{\@academicyear}{#1}} % % \end{macrocode} % \end{macro} % % \begin{macro}{\copyrightnotices} % This macro sets the |\@copyrightnotices| tag that later will be % used on the back of the title page. % \begin{macrocode} %<*ct|rp> \newcommand{\@copyrightnotices}{} \newcommand{\copyrightnotices}[1]{\renewcommand{\@copyrightnotices}{#1}} % % \end{macrocode} % \end{macro} % % \begin{macro}{\sender} % This macro sets the |\@sender| and |\@senderrole| tags that will be % used in the letter's heading text. % \begin{macrocode} %<*le> \newcommand*{\@sender}{< Specify sender using \textbackslash{}sender\{name\}\{role\} >} \newcommand*{\@senderrole}{~} \newcommand*{\sender}[2]{\renewcommand*{\@sender}{#1}\renewcommand*{\@senderrole}{#2}} % % \end{macrocode} % \end{macro} % % \begin{macro}{\logo} % This macro sets the |\@logo| tag that will be used to load a % graphics file with that name. % \begin{macrocode} %<*le|ex> \newcommand*{\logo}[1]{\renewcommand*{\@logo}{#1}} % % \end{macrocode} % \end{macro} % % \begin{macro}{\unit} % This macro sets the |\@unit| tag that will be used in the letter's % heading text. % \begin{macrocode} %<*le> \newcommand*{\@unit}{} \newcommand*{\unit}[1]{\renewcommand*{\@unit}{#1}} % % \end{macrocode} % \end{macro} % % \begin{macro}{\email} % This macro sets the |\@emailuser| and |\@emaildomain| tags that % will be used in the letter's heading text. This split construction % was used to overcome problems with the |@| sign. % \begin{macrocode} %<*le> \newcommand*{\@emailuser}{} \newcommand*{\@emaildomain}{} \newcommand*{\email}[2]{\renewcommand*{\@emailuser}{#1}\renewcommand*{\@emaildomain}{#2}} % % \end{macrocode} % \end{macro} % % \begin{macro}{\phone} % This macro sets the |\@phone| tag that will be used in the letter's % heading text. % \begin{macrocode} %<*le> \newcommand*{\@phone}{} \newcommand*{\phone}[1]{\renewcommand*{\@phone}{#1}} % % \end{macrocode} % \end{macro} % % \begin{macro}{\fax} % This macro sets the |\@fax| tag that will be used in the letter's % heading text. % \begin{macrocode} %<*le> \newcommand*{\@fax}{} \newcommand*{\fax}[1]{\renewcommand*{\@fax}{#1}} % % \end{macrocode} % \end{macro} % % % \begin{macro}{\mobile} % This macro sets the |\@mobile| tag that will be used in the letter's % heading text. % \begin{macrocode} %<*le> \newcommand*{\@mobile}{} \newcommand*{\mobile}[1]{\renewcommand*{\@mobile}{#1}} % % \end{macrocode} % \end{macro} % % % \begin{macro}{\returnaddress} % This macro sets the |\@returnaddress| tag that will be used in the letter's % heading text (in the area of the envelope's window). % \begin{macrocode} %<*le> \newcommand*{\@returnaddress}{} \renewcommand*{\returnaddress}[1]{\renewcommand*{\@returnaddress}{#1}} % % \end{macrocode} % \end{macro} % % % \begin{macro}{\to} % This macro sets the |\@to| tag that will be used in the letter's % heading text (in the area of the envelope's window). % \begin{macrocode} %<*le> \newcommand*{\@to}{} \renewcommand*{\to}[1]{\renewcommand*{\@to}{#1}} % % \end{macrocode} % \end{macro} % % % \begin{macro}{\toorganization} % This macro sets the |\@toorganization| tag that will be used in % the letter's heading text (in the area of the envelope's window). % \begin{macrocode} %<*le> \newcommand*{\@toorganization}{} \newcommand*{\toorganization}[1]{\renewcommand*{\@toorganization}{#1}} % % \end{macrocode} % \end{macro} % % \begin{macro}{\toaddress} % This macro sets the |\@toaddress| tag that will be used in % the letter's heading text (in the area of the envelope's window). % \begin{macrocode} %<*le> \newcommand*{\@toaddress}{} \newcommand*{\toaddress}[1]{\renewcommand*{\@toaddress}{#1}} % % \end{macrocode} % \end{macro} % % \begin{macro}{\subject} % This macro sets the |\@subject| tag that will be used in % the letter's heading text. % \begin{macrocode} %<*le> \newcommand*{\@subject}{-} \newcommand*{\subject}[1]{\renewcommand*{\@subject}{#1}} % % \end{macrocode} % \end{macro} % % \begin{macro}{\opening} % This macro is much a do about nothing, but I prefer to do it this % way for historic reasons. % \begin{macrocode} %<*le> \renewcommand*{\opening}[1]{#1} % % \end{macrocode} % \end{macro} % % \begin{macro}{\closing} % This macro sets the |\@closing| tag that will be used to finish % the letter. % \begin{macrocode} %<*le> \newcommand*{\@closing}{} \renewcommand*{\closing}[1]{\renewcommand*{\@closing}{#1}} % % \end{macrocode} % \end{macro} % % \begin{macro}{\signature} % \changes{v1.8}{2017/01/08}{Added signature} % This macro sets the |\@signature| tag that will be used to finish % the letter. By default this corresponds to a decent amount of % vertical white space % \begin{macrocode} %<*le> \newcommand*{\@signature}{\vspace*{8ex}} \renewcommand*{\signature}[1]{\renewcommand*{\@signature}{#1}} % % \end{macrocode} % \end{macro} % % % \begin{macro}{\carboncopy} % This macro will set the |\@carboncopy| tag that will be used in % the trailer of the letter. % \begin{macrocode} %<*le> \newcommand*{\@carboncopy}{} \newcommand*{\carboncopy}[1]{\renewcommand*{\@carboncopy}{#1}} % % \end{macrocode} % \end{macro} % % \begin{macro}{\enclosed} % This macro will set the |\@enclosed| tag that will be used in % the trailer of the letter. % \begin{macrocode} %<*le> \newcommand*{\@enclosed}{} \newcommand*{\enclosed}[1]{\renewcommand*{\@enclosed}{#1}} % % \end{macrocode} % \end{macro} % % \begin{macro}{\address} % This macro will set the |\@address| tag that will be used in % the letter's heading text (in the area of the envelope's window). % \begin{macrocode} %<*pt|rp|le> \newcommand*{\@address}{ \PackageError{uantwerpendocs} {Please, set your multi-line address and contact details using the '\protect\address{}' command in the preamble of your document} {See the uantwerpendocs manual} } % % %\newcommand*{\address}[1]{\renewcommand*{\@address}{#1}} %\renewcommand*{\address}[1]{\renewcommand*{\@address}{#1}} % \end{\macrocode} % \end{macro} % % \begin{macro}{\exampart} % This macro will set the |\@examgropunumber| tag that will be used on % the exam title page. % \begin{macrocode} %<*ex> \newcommand*{\@exampart}{} \newcommand*{\exampart}[1]{\renewcommand*{\@exampart}{#1}} % % \end{macrocode} % \end{macro} % % \begin{macro}{\examgroupnumber} % This macro will set the |\@examgroupnumber| tag that will be used on % the exam title page. % \begin{macrocode} %<*ex> \newcommand*{\@examgroupnumber}{} \newcommand*{\examgroupnumber}[1]{\renewcommand*{\@examgroupnumber}{#1}} % % \end{macrocode} % \end{macro} % % \begin{macro}{\examdate} % This macro will set the |\@examdate| tag that will be used on % the exam title page. % \begin{macrocode} %<*ex> \newcommand*{\@examdate}{TBD} \newcommand*{\examdate}[1]{\renewcommand*{\@examdate}{#1}} % % \end{macrocode} % \end{macro} % % \begin{macro}{\examlength} % This macro will set the |\@examlength| tag that will be used on % the exam title page. % \begin{macrocode} %<*ex> \newcommand*{\@examlength}{TBD} \newcommand*{\examlength}[1]{\renewcommand*{\@examlength}{#1}} % % \end{macrocode} % \end{macro} % % \begin{macro}{\tstart} % This macro will set the |\@tstart| tag that will be used on % the exam title page. % \begin{macrocode} %<*ex> \newcommand*{\@tstart}{TBD} \newcommand*{\tstart}[1]{\renewcommand*{\@tstart}{#1}} % % \end{macrocode} % \end{macro} % % \begin{macro}{\tend} % This macro will set the |\@tend| tag that will be used on % the exam title page. % \begin{macrocode} %<*ex> \newcommand*{\@tend}{TBD} \newcommand*{\tend}[1]{\renewcommand*{\@tend}{#1}} % % \end{macrocode} % \end{macro} % % \begin{macro}{\room} % This macro will set the |\@rooms| tag that will be used on % the exam title page. % \begin{macrocode} %<*ex> \ExplSyntaxOn \seq_new:N \g_@@_rooms \cs_new:Nn \@@_addroom:n { \seq_gpush:Nn \g_@@_rooms { #1 } } \NewDocumentCommand{\room}{m}{ \@@_addroom:n { #1 } } \NewDocumentCommand{\jointrooms}{m}{ \seq_use:Nn \g_@@_rooms { #1 } } \NewDocumentCommand{\roomsname}{}{ \if_int_compare:w \seq_count:N \g_@@_rooms > 1 \uantwerpendocsprop{roomsname} \else: \uantwerpendocsprop{roomname} \fi: } \AtBeginDocument{ \seq_greverse:N \g_@@_rooms } \ExplSyntaxOff % % \end{macrocode} % \end{macro} % % \begin{macro}{\extrainfo} % This macro will set the |\@extrainfo| tag that will be used on % the back of the exam title page. % When as (optional) first argument 'firstpage' is given, the extra % info will start on the first page below the title block. In that % case, we assume that conservation of space is your concern, so the % extra info will also not be terminated with a 'clearpage'. % If no optional first argument is given (or the default % 'separatepage' is given), the extra info will start on a new page % an will be terminated by a clearpage. % \changes{v2.1}{2018/06/20}{Changed default to empty} % \changes{v2.3}{2019/03/27}{The command \textbackslash{}extrainfo % now allows for an extra (optional) first argument 'firstpage'} % \begin{macrocode} %<*ex> \newcommand{\@extrainfo}{} \newcommand\extrainfo[2][separatepage]{ \ifthenelse{\equal{#1}{separatepage}}{ % then \renewcommand{\@extrainfo}{\clearpage #2 \clearpage} } { % else \ifthenelse{\equal{#1}{firstpage}} { \renewcommand{\@extrainfo}{#2} } { \PackageError{uantwerpendocs} {The first (optional) argument of '\protect\extrainfo' can only be 'separatepage' or 'firstpage'} {See the uantwerpendocs manual)'} } } } % % \end{macrocode} % \end{macro} % % % \begin{macro}{\studentnr} % This macro will set the |\@studentnr| tag that will be used in the % header of the pages. % \begin{macrocode} %<*ex> \newcommand*{\@studentnr}{0} \newcommand*{\studentnr}[1]{\renewcommand*{\@studentnr}{#1}} % % \end{macrocode} % \end{macro} % % \subsection{Header and Footer} % The |fancyhdr| package is used to make a decent header and footer. % The header and footer of the |coursetext| class are defined to be: % \begin{macrocode} %<*ct> \if@twoside \lhead[\thepage]{\slshape\rightmark} \chead[]{} \rhead[\slshape\leftmark]{\thepage} \lfoot[\uantwerpendocsprop{org-ua} -- \@facultyacronym]{\@courseversion} \cfoot[]{} \rfoot[]{\@title{}\ifdefvoid{\@subtitle}{}{ --- \@subtitle}} \else \lhead[]{\leftmark} \chead[]{} \rhead[]{\thepage} \lfoot[]{\@courseversion} \cfoot[]{UAntwerpen--\@facultyacronym} \rfoot[]{\@title{}} \fi % % \end{macrocode} % % The header and footer of the |bamathesis| class are % defined to be: % \begin{macrocode} %<*bmt|pt|rp> \if@twoside \lhead[\thepage]{\slshape\rightmark} \chead[]{} \rhead[\slshape\leftmark]{\thepage} \lfoot[]{} \cfoot[]{} \rfoot[]{} \else \lhead[]{\leftmark} \chead[]{} \rhead[]{\thepage} \lfoot[]{} \cfoot[]{} \rfoot[]{} \fi % % \end{macrocode} % % The header and footer of the |letter| class are % defined to be: % \begin{macrocode} %<*le> \lhead[]{} \chead[]{} \rhead[]{} \lfoot[\small\textcolor{gray}{\@date}]{\textcolor{gray}{\@date}} \cfoot[]{} \rfoot[\small\textcolor{gray}{\pagename~\thepage~\uantwerpendocsprop{of}~\pageref{lastpage}}] {\small\textcolor{gray}{\pagename~\thepage~\uantwerpendocsprop{of}~\pageref{lastpage}}} % % \end{macrocode} % % The header and footer of the |exam| class are defined to % be: % \begin{macrocode} %<*ex> \lhead[]{} \chead[]{} \cfoot[\small \thepage/\pageref{lastpage}]{\small\thepage/\pageref{lastpage}} \if@examiner \rhead[\small EXAMINER VERSION]{\small EXAMINER VERSION} \AddToShipoutPicture{ \put(60,40){\rotatebox{60}{\textcolor{watermark}{ \fontfamily{phv}\fontsize{105}{130}\fontseries{m}\fontshape{n}% \selectfont Examiner Version}}}} \else \rhead[\small Student nr. \@studentnr]{\small Student nr. \@studentnr} \fi % % \end{macrocode} % Some common code remains: % \changes{v1.1}{2013/05/28}{Made raggedright conditional on option % 'filled', because it can't be undone} % \changes{v1.2}{2014/08/22}{Increased headheight to please Fancyhdr} % \begin{macrocode} %<*ct> \setlength{\headheight}{13.7pt} \renewcommand*{\headrulewidth}{1pt} \renewcommand*{\footrulewidth}{1pt} \pagenumbering{arabic} % %<*mt|pt|rp|le> \setlength{\headheight}{13.7pt} \renewcommand*{\headrulewidth}{0pt} \renewcommand*{\footrulewidth}{0pt} % %<*ex> \setlength{\headheight}{13.7pt} \renewcommand*{\headrulewidth}{0pt} % % \end{macrocode} % % Remains to take care of filling % % \begin{macrocode} %<*ct|mt|pt|rp|le> \if@filled\else \raggedright \fi \raggedbottom \onecolumn % % \end{macrocode} % % \subsection{Copyright notice} % % \begin{macro}{\@crnotice} % This is the standard text that will be used for the |\@crnotice| tag. % \begin{macrocode} %<*ct|rp> \newcommand{\@crnotice}{ This document has been typeset using \LaTeX{} and the \texttt{uantwerpendocs} package.\\ \@copyrightnotices % % \@courseversion %<*ct|rp> CONFIDENTIAL AND PROPRIETARY. \copyright{} \@versionyear{} \uantwerpendocsprop{org-ua}, \uantwerpendocsprop{arr}. } % % \end{macrocode} % \end{macro} % % % \subsection{Fancy chapter headers for the phdthesis class} % % \changes{v2.1}{2018/06/20}{Added appropriate % \textbackslash{}appendix command} % \changes{v2.2}{2018/10/23}{Added white chapter number outline} % \changes{v2.2}{2018/10/23}{Corrected spacing} % \begin{macrocode} %<*pt|rp> \def\@makechapterhead#1{% \vspace*{1ex}% \begin{flushright} \makebox[0pt][l]{\rule[-0.4em]{10cm}{1.8em}}\textcolor{white} {\bf\LARGE~\chaptername~} \raisebox{-24pt}{ \begin{tikzpicture} \foreach \theta in {0,5,...,355} { \node[color=white] at (\theta:0.025) {\bf\fontsize{72}{12}\selectfont\thechapter}; } \node[color=gray] at (0,0) {\bf\fontsize{72}{12}\selectfont\thechapter}; \end{tikzpicture} }\hspace*{-8pt} \par\nobreak \interlinepenalty\@M \bf\huge\textcolor{darkgray}{\rule[-0.5ex]{0em}{2.6ex}~#1} \par\nobreak \end{flushright} \rule{\textwidth}{1pt} \vspace{5\p@}\par\nobreak } \def\@schapter#1{% \@makeschapterhead{#1}% \@afterheading } \def\@makeschapterhead#1{% \vspace*{1ex}% \begin{flushright} \bf\LARGE\textcolor{darkgray}{\rule[-0.5ex]{0em}{2.6ex}~#1} \end{flushright} \rule{\textwidth}{1pt} \vspace{5\p@}\par } % overwrite appendix \def\appendix{ \setcounter{chapter}{0} \renewcommand*{\thechapter}{\Alph{chapter}} \renewcommand*\chaptername\appendixname } % % \end{macrocode} % % \subsection{Title page for the masterthesis and coursetext clases} % % The title page is generated using the |\maketitle| command. As the % book class from which we inherit already defines this command, we % need to renew it. % % % \begin{macro}{\maketitle} % The macro for the coursetext class: % \changes{v1.7}{2016/05/01}{Embedded babel translations of keywords % into title page} % \begin{macrocode} %<*ct> \renewcommand\maketitle{% \pagestyle{empty} \begin{titlepage} \AddToShipoutPicture*{% \put(0,0){% \if@modern \begin{tikzpicture}[inner sep=0pt,outer sep=0pt] \clip (0,0) rectangle(\paperwidth,\paperheight); \begin{scope} \clip (2.125,20.192) rectangle (\paperwidth,6); \fill[sidecolor] (2.125,20.192) rectangle (\paperwidth,6); \node[anchor=south west] at (2.125,6) {\ifx\@titlepageimage\@empty \else \includegraphics[keepaspectratio, scale=0.01, min size={18.875cm}{14.192cm}]{\@titlepageimage} \fi}; \end{scope} \node [anchor=west,text width=13.75cm,align=left,font=\Huge,uauaside] at (2.125,27) { \textsf{\textbf{\@title}} }; \node [anchor=west,text width=13.75cm,align=left,font=\Large,uauaside] at (2.125,25.5) { \textsf{\textbf{\@subtitle}} }; \node [anchor=base west,maincolor,text width=13.75cm,align=left,font=\LARGE] at (2.125,24) {\textsf{\textbf{\@author}}}; \node [anchor=west,text width=13.75cm,align=left,font=\large,uauaside] at (2.125,22) {\textsf{\jointcourseswithcodes{\\}}}; \fill[maincolor] (2.125,6) -- (\paperwidth,6) -- (\paperwidth,2.625) -- (2.55,2.625) arc (-90:-180:0.425) -- cycle; \node[white,anchor=west,align=left,font=\large] (SN) at (2.55,5.1) { \begin{tabular}{@{}l@{~\,}p{14.5cm}} \textsf{\lecturersname} & \textsf{\textbf{\jointlecturers{ | }}} \end{tabular} }; \node[white,anchor=west,text width=17.5cm,align=left,font=\small] at (2.55,3.7) {\textsf{\@degree{}}\\ \textsf{\textbf{\@faculty{} | \@academicyear \hfill \@publishercode}}\\ \textsf{\@publisher}}; \node[anchor=west] at (2.125,1.313) {\includegraphics[width=4.75cm]{\logopos}}; \end{tikzpicture} \else \begin{tikzpicture}[inner sep=0pt,outer sep=0pt] \clip (0,0) rectangle(\paperwidth,\paperheight); \if@cameraready \else \fill[uauamain] (0,29.7) -- (2.2,29.7) -- (2.2,21.435) arc (0:-90:0.235) -- (0,21.2) -- cycle; \node[anchor=west] at (2.2,1.8) {\includegraphics[width=5.2cm]{\logoposua}}; \fi \node [anchor=north west,text width=14.75cm,align=left] at (5,27.1) { \fontsize{16}{20}\selectfont\textsf{\textbf{\uantwerpendocsprop{acyearname}}}\\[1ex] \fontsize{16}{20}\selectfont\textsf{\@academicyear} }; \node [anchor=north west,text width=14.75cm,align=left] at (5,22.7) { \fontsize{16}{20}\selectfont\textsf{\@faculty} }; \node [anchor=north west,text width=14.75cm,align=left] (title) at (5,20.9) { \fontsize{24}{30}\selectfont\textsf{\textbf{\@title}}\\[1ex] \fontsize{18}{24}\selectfont\textsf{\@subtitle} }; \node [anchor=north west,below=of title, text width=14.75cm,align=left, yshift=-0.5cm] { \fontsize{12}{15}\selectfont{\textsf{\@degree}} }; \node [anchor=north west,text width=14.75cm,align=left] (title) at (5,13.3) { \fontsize{12}{15}\selectfont\textsf{\textbf{\jointlecturers{\\}}} }; \node [anchor=north west,text width=14.75cm,align=left] (title) at (5,10) { \fontsize{12}{15}\selectfont\textsf{\jointcourseswithcodes{\\}} }; \node[anchor=east] at (19,1.8) { \fontsize{12}{15}\selectfont\textsf{\@publishercode} }; \end{tikzpicture} \fi } } \end{titlepage}% ~\par\relax \clearpage \if@copyright \backgroundsetup{contents={Copyright University of Antwerp, All Rights Reserved}} \fi \vspace*{\stretch{1}} \@crnotice \clearpage \setcounter{footnote}{0}% \global\let\thanks\relax \global\let\maketitle\relax \global\let\@thanks\@empty \global\let\title\relax \global\let\author\relax \global\let\date\relax \global\let\and\relax \pagestyle{fancy} \thispagestyle{empty} } % % \end{macrocode} % \end{macro} % % \begin{macro}{\makefinalpage} % Below, one can find the code for the final page of the % |coursetext| class: % \changes{v1.3}{2015/12/31}{Changed eso-pic for tikz} % \changes{v1.8}{2016/07/06}{Inserted blank one but last page} % \begin{macrocode} %<*ct> \newcommand\makefinalpage{ \if@cameraready \else \cleardoublepage \thispagestyle{empty} \if@copyright\NoBgThispage\fi ~% intentionally blank page \clearpage \thispagestyle{empty} \if@copyright\NoBgThispage\fi \AddToShipoutPicture*{% \put(0,0){% \if@modern \begin{tikzpicture}[inner sep=0pt,outer sep=0pt] \clip (0,0) rectangle(\paperwidth,\paperheight); \fill[sidecolor] (0,0) rectangle (2.125cm,2.625cm); \end{tikzpicture} \else \begin{tikzpicture}[inner sep=0pt,outer sep=0pt] \clip (0,0) rectangle(\paperwidth,\paperheight); \fill[uauamain] (0,21.2) rectangle (21,29.7); \end{tikzpicture} \fi } } ~ \fi } % % \end{macrocode} % \end{macro} % % \begin{macro}{\maketitle} % And next, the code for the title page of the % |bamathesis| class: % \changes{v1.3}{2015/12/31}{Changed eso-pic for tikz} % \changes{v1.7}{2016/05/01}{Embedded babel translations of keywords % into title page} % \begin{macrocode} %<*bmt> \renewcommand\maketitle{% \pagestyle{empty} \begin{titlepage} \AddToShipoutPicture*{% \put(0,0){% \begin{tikzpicture}[inner sep=0pt,outer sep=0pt] \clip (0,0) rectangle(\paperwidth,\paperheight); \fill[lightgray] (2.125,{\paperheight-7.5cm}) rectangle (\paperwidth,6); \node [anchor=west,text width={\paperwidth-5cm},align=left,font=\Huge,uauaside] at (2.125,{\paperheight-3cm}) { \textsf{\textbf{\@title}} }; \node [anchor=west,text width={\paperwidth-5cm},align=left,font=\Large,uauaside] at (2.125,{\paperheight-5cm}) { \textsf{\textbf{\@subtitle}} }; \node [anchor=base west,uauamain, text width={\paperwidth-5cm},align=left,font=\LARGE] at (2.125,{\paperheight-6.5cm}) {\textsf{\textbf{\@author}}}; \fill[gray] (2.125,6) -- (\paperwidth,6) -- (\paperwidth,2.625) -- (2.55,2.625) arc (-90:-180:0.425) -- cycle; \node[white,anchor=west,align=left,font=\large] (SN) at (2.55,4.9) { \begin{tabular}{@{}l@{~\,}p{14.5cm}} \textsf{\supervisorsname} & \textsf{\textbf{\jointsupervisors{ | }}} \end{tabular} }; \node[white,anchor=west,text width=17.5cm,align=left,font=\small] at (2.55,3.7) {\textsf{\uantwerpendocsprop{bmthesisname} \@degree{}}\\ \textsf{\textbf{\@faculty{} | \@defenselocation, \@defensedate}}}; \node[anchor=west] at (2.125,1.313) {\includegraphics[width=4.75cm]{\logoposua}}; \end{tikzpicture} } } \end{titlepage}% ~\par\relax \clearpage \setcounter{footnote}{0}% \global\let\thanks\relax \global\let\maketitle\relax \global\let\@thanks\@empty \global\let\title\relax \global\let\author\relax \global\let\date\relax \global\let\and\relax \pagestyle{fancy} \thispagestyle{empty} } % % \end{macrocode} % \end{macro} % % \begin{macro}{\makefinalpage} % Below, one can find the code for the final page of the % |bamathesis| class: % \changes{v1.3}{2015/12/31}{Changed eso-pic for tikz} % \begin{macrocode} %<*bmt> \newcommand\makefinalpage{ \cleardoublepage \thispagestyle{empty} ~% intentionally blank page \clearpage \thispagestyle{empty} \begin{tikzpicture}[remember picture,overlay] \node at (current page.center) { \begin{tikzpicture}[inner sep=0pt] \clip (0,0) rectangle(\paperwidth,\paperheight); \fill[lightgray] (0,0) rectangle (2.125cm,2.625cm); \end{tikzpicture} }; \end{tikzpicture} } % % \end{macrocode} % \end{macro} % % \subsection{Title page for the phdthesis clases} % % The title page is generated using the |\maketitle| command. As the % book class from which we inherit already defines this command, we % need to renew it. % % \begin{macro}{\maketitle} % Below, one can find the code for the title page of the % |phdthesis| class: % \changes{v2.0}{2018/03/14}{Implemented title page} % \changes{v2.1}{2018/06/20}{Corrected information page (p4) jury % spacing} % \changes{v2.5}{2019/10/18}{Corrected formatting in case of absent % ISBN or depot number} % \begin{macrocode} %<*pt> \renewcommand\maketitle{% \pagestyle{empty} \begin{titlepage} \AddToShipoutPicture*{% \put(0,0){% \begin{tikzpicture}[inner sep=0pt,outer sep=0pt] \useasboundingbox (0,0) rectangle(\paperwidth,\paperheight); \fill[lightgray] (2.125,19) rectangle (\paperwidth+3mm,6); \begin{scope} \clip (2.125,19) rectangle (\paperwidth+3mm,6); \node[anchor=south west] at (2.125,6) {\ifx\@titlepageimage\@empty \else \includegraphics[keepaspectratio, scale=0.01, min size={16.175cm}{13cm}]{\@titlepageimage} \fi}; \end{scope} \node [anchor=west,text width=13.75cm,align=left,font=\Huge,uauaside] at (2.125,23.5) { \textsf{\textbf{\@title}} }; \node [anchor=west,text width=13.75cm,align=left,font=\Large,uauaside] at (2.125,21.5) { \textsf{\textbf{\@subtitle}} }; \node [anchor=base west,maincolor, text width=13.75cm,align=left,font=\LARGE] at (2.125,20) {\textsf{\textbf{\@author}}}; \fill[maincolor] (2.125,6) -- (\paperwidth+3mm,6) -- (\paperwidth+3mm,2.625) -- (2.55,2.625) arc (-90:-180:0.425) -- cycle; \node[white,anchor=west,align=left,font=\large] (SN) at (2.55,4.9) { \begin{tabular}{@{}l@{~\,}p{11.5cm}} \textsf{\supervisorsname} & \textsf{\textbf{\jointsupervisors{ | }}} \end{tabular} }; \node[white,anchor=west,text width=14.5cm,align=left,font=\small] at (2.55,3.7) {\textsf{\uantwerpendocsprop{pthesisnamei} \@degree{}}\\ \textsf{\textbf{\@faculty{} | \@defenselocation, \@defensedate}}}; \node[anchor=west] at (2.125,1.313) {\includegraphics[width=4.75cm]{\logoposua}}; \end{tikzpicture} } } \end{titlepage}% ~\par\relax \cleardoublepage \begin{center} \includegraphics[width=4.75cm]{\logoposua} \vfill \@faculty\\ \@degree\par \vfill \Huge\textsf{\@title}\par \large\textsf{\@subtitle}\par \vfill \normalsize\uantwerpendocsprop{pthesisnamei}\\ \@degree\\ \uantwerpendocsprop{pthesisnameii}\\ \medskip \textbf{\@author} \vfill \begin{minipage}[b]{0.4\textwidth} \@defenselocation, \@defensedate \end{minipage} \hfill \begin{minipage}[b]{0.4\textwidth} \flushright \supervisorsname\\ \jointsupervisors{\\} \end{minipage} \end{center} \clearpage \textbf{\uantwerpendocsprop{juryname}}\hfill\par \textbf{\uantwerpendocsprop{jurychairmanname}}\hfill\break \@jurychairman{}\ifdefvoid{\@jurychairmanaff}{}{, \@jurychairmanaff}\\ \hfill\break \textbf{\supervisorsname}\hfill\break \jointsupervisorswithaffiliation{\\}\\ \hfill\break \textbf{\uantwerpendocsprop{jurymembersname}}\hfill\break \jointjurymembers{\\} \hfill\break \vfill \textbf{Contact}\\ \smallskip \@author\\ \@affiliation\\ \@address\\ \vfill \copyright{} \@defensedate{} \@author\\ \uantwerpendocsprop{arr}. \vfill \begin{minipage}[b]{.5\linewidth} \ifdefempty{\@isbn}{}{ISBN \@isbn}~\\ \ifdefempty{\@depot}{}{Wettelijk depot \@depot}~\\ \end{minipage} \hfill \ifdefempty{\@isbn}{}{ \begin{minipage}[b]{.5\linewidth} \expandafter\EAN \@isbn \end{minipage} } \setcounter{footnote}{0}% \global\let\thanks\relax \global\let\maketitle\relax \global\let\@thanks\@empty \global\let\title\relax \global\let\author\relax \global\let\date\relax \global\let\and\relax \pagestyle{fancy} \thispagestyle{empty} \ } % % \end{macrocode} % \end{macro} % % \begin{macro}{\makefinalpage} % Below, one can find the code for the final page of the % |phdthesis| class: % \changes{v2.0}{2018/03/14}{Implemented final page} % \begin{macrocode} %<*pt> \newcommand\makefinalpage{ \cleardoublepage \thispagestyle{empty} ~% intentionally blank page \clearpage \thispagestyle{empty} \AddToShipoutPicture*{% \put(0,0){% \begin{tikzpicture}[inner sep=0pt,outer sep=0pt] \useasboundingbox (0,0) rectangle (\paperwidth,\paperheight); \fill[sidecolor] (-3mm,-3mm) rectangle (2.125cm,2.625cm); \end{tikzpicture} } } ~ } % % \end{macrocode} % \end{macro} % % \subsection{Title page for the report clases} % % The title page is generated using the |\maketitle| command. As the % report class from which we inherit already defines this command, we % need to renew it. % % \begin{macro}{\maketitle} % Below, one can find the code for the title page of the % |report| class: % \begin{macrocode} %<*rp> \renewcommand\maketitle{% \pagestyle{empty} \begin{titlepage} \AddToShipoutPicture*{% \put(0,0){% \begin{tikzpicture}[inner sep=0pt,outer sep=0pt] \clip (0,0) rectangle(\paperwidth,\paperheight); \fill[lightgray] (2.125,20.192) rectangle (\paperwidth,6); \begin{scope} \clip (2.125,20.192) rectangle (\paperwidth,6); \node[anchor=south west] at (2.125,6) {\ifx\@titlepageimage\@empty \else \includegraphics[keepaspectratio, scale=0.01, min size={18.875cm}{14.192cm}]{\@titlepageimage} \fi}; \end{scope} \node [anchor=west,text width=17cm,align=left,font=\Huge,uauaside] at (2.125,\paperheight-3cm) { \textsf{\textbf{\@title}} }; \node [anchor=west,text width=17cm,align=left,font=\Large,uauaside] at (2.125,\paperheight-5cm) { \textsf{\textbf{\@subtitle}} }; \node [anchor=base west,maincolor, text width=17cm,align=left,font=\LARGE] at (2.125,\paperheight-6.5cm) {\textsf{\textbf{\@author}}}; \fill[maincolor] (2.125,6) -- (\paperwidth,6) -- (\paperwidth,2.625) -- (2.55,2.625) arc (-90:-180:0.425) -- cycle; \node[white,anchor=west,text width=17cm,align=left,font=\small] at (2.55,5.3) {\textsf{\textbf{\@extra}}}; \node[white,anchor=west,text width=17cm,align=left,font=\small] at (2.55,4) {\textsf{\textbf{\@affiliation{} | \@versionyear}\\ \@address}}; \node[anchor=west] at (2.125,1.313) {\includegraphics[width=4.75cm]{\logopos}}; \end{tikzpicture} } } \end{titlepage}% ~\par\relax \cleardoublepage \begin{center} \includegraphics[width=4.75cm]{\logopos} \vfill \@affiliation\\ \@extra\par \vfill \Huge\textsf{\@title}\par \large\textsf{\@subtitle}\par \vfill \textbf{\@author} \vfill \end{center} \clearpage \vfill \textbf{Contact}\\ \smallskip \@author\\ \@affiliation\\ \@address\\ \vfill \copyright{} \@versionyear{} \@author\\ \uantwerpendocsprop{arr}. \vfill \setcounter{footnote}{0}% \global\let\thanks\relax \global\let\maketitle\relax \global\let\@thanks\@empty \global\let\title\relax \global\let\author\relax \global\let\date\relax \global\let\and\relax \pagestyle{fancy} \thispagestyle{empty} \ } % % \end{macrocode} % \end{macro} % % \begin{macro}{\makefinalpage} % Below, one can find the code for the final page of the % |phdthesis| class: % \changes{v2.0}{2018/03/14}{Implemented final page} % \begin{macrocode} %<*rp> \newcommand\makefinalpage{ \cleardoublepage \thispagestyle{empty} ~% intentionally blank page \clearpage \thispagestyle{empty} \begin{tikzpicture}[remember picture,overlay] \node at (current page.center) { \begin{tikzpicture}[inner sep=0pt] \clip (0,0) rectangle(\paperwidth,\paperheight); \fill[sidecolor] (0,0) rectangle (2.125cm,2.625cm); \end{tikzpicture} }; \end{tikzpicture} } % % \end{macrocode} % \end{macro} % % % \subsection{Title page for the letter class} % % \subsubsection{Title Page} % % \begin{macro}{\maketitle} % The top of the letter is generated using the |\maketitle| % command. % % \changes{v1.5}{2016/01/11}{Implemented new footer} % \changes{v1.8}{2016/01/08}{Allowed for empty senderrole} % \begin{macrocode} %<*le> \newcommand\maketitle{% \pagestyle{fancy} \thispagestyle{empty} \begin{tikzpicture}[overlay,remember picture] \path (current page.north west) +(1.8cm,-1.2cm) node[anchor=north west] { \includegraphics[height=1.1cm]{\@logo} }; \draw (current page.north west) +(1cm,-98mm) -- +(1.5cm,-98mm); % 90 x 45 % pos: 20mm van kant, 15mm van onderkant \path (current page.north east) +(-100mm,-65mm) node[anchor=west,text width=80mm,align=left] { \scriptsize\textcolor{gray}{\uline{\@returnaddress}}\\* \normalsize\@to\\* \@toorganization\\* \@toaddress }; \end{tikzpicture} ~\\[3ex] \textcolor{uacorpblue}{\bf \@sender} \ifx\@senderrole\@emptymacro\\[1.75ex]\else \\*\@senderrole\\[1.75ex]\fi \@faculty \ifx\@unit\@emptymacro\else\\* \@unit\fi~\\[1.75ex] \@address\\[1.75ex] \ifx\@email\@emptymacro\else E \@emailuser\tat{}\@emaildomain\\\fi \ifx\@phone\@emptymacro\else T \@phone\\\fi \ifx\@fax\@emptymacro\else F \@fax\\\fi \ifx\@mobile\@emptymacro\else M \@mobile\\\fi ~\\[4ex] \begin{tikzpicture}[anchor=north west,align=left,outer sep=0,inner sep=0] \path (0,0) node { \scriptsize \strut \textcolor{gray}{\uppercase\expandafter{\uantwerpendocsprop{datename}} } } (4cm,0) node { \scriptsize \strut \textcolor{gray}{\uppercase\expandafter{\uantwerpendocsprop{subjectname}} } } (0,-2.5ex) node { \strut \@date } (4cm,-2.5ex) node[align=left] { \strut \@subject }; \end{tikzpicture}~\\[4ex] } % % \end{macrocode} % \end{macro} % % The trailer of the page is automatically generated at the end of the document: % \changes{v1.8}{2016/01/08}{Allowed for empty senderrole} % \begin{macrocode} %<*le> \AtEndDocument{ \@closing\\*[3ex]\@signature~\\[3ex] \@sender \ifx\@senderrole\@emptymacro\\[8ex]\else\\*\@senderrole\\[8ex]\fi \setlength{\parskip}{0em} \ifx\@carboncopy\@emptymacro\else CC: \@carboncopy\\[4ex]\fi \ifx\@enclosed\@emptymacro\else ENCL: \@enclosed\fi \label{lastpage} } % % \end{macrocode} % % \subsection{Title page for the exam class} % % \changes{v2.1}{2018/06/20}{Corrected spacing in title + exampart} % \changes{v2.3}{2019}{2019/03/27}{Now Groep has been replaced by Reeks % to be consistent with UAntwerpen PC-room nomenclature} % \changes{v2.3}{2019/03/27}{Added boxes to fill out name and docket number} % \begin{macro}{\maketitle} % The title page of the exam class is generated using the |\maketitle| % command. % % \begin{macrocode} %<*ex> \renewcommand\maketitle{% \pagestyle{fancy} \AddToShipoutPicture*{% \put(0,0){% \begin{tikzpicture}[inner sep=0pt,outer sep=0pt] \clip (0,0) rectangle(\paperwidth,\paperheight); \fill[lightgray] (2.125,{\paperheight-7cm}) rectangle (\paperwidth,6); \node [anchor=west,text width={\paperwidth-5cm},align=left] at (2.125,{\paperheight-3cm}) {% \fontfamily{phv}\fontsize{18}{22}\fontseries{b}% \fontshape{n}\selectfont% \@course{} \ifx\@exampart\@emptymacro \else --- \@exampart\fi }; \node [anchor=west,text width={\paperwidth-5cm},align=left] at (2.125,{\paperheight-4cm}) {% \fontfamily{phv}\fontsize{12}{18}\fontseries{b}% \fontshape{n}\selectfont% \@coursecode }; \node [anchor=west,text width={\paperwidth-5cm},align=left,font=\large] at (2.125,{\paperheight-5cm}) {% \fontfamily{phv}\fontsize{12}{18}\fontseries{m}% \fontshape{n}\selectfont% \uantwerpendocsprop{seriesname} \@examgroupnumber{} \hfill \@examdate{} }; \node[anchor=south west,align=left,inner sep=0pt] at (3,21) {% \fontfamily{phv}\fontsize{14}{19}\fontseries{b}% \fontshape{n}\selectfont% \uantwerpendocsprop{examname} }; \node[anchor=south west,align=left,inner sep=0pt] at (3,19) {% \fontfamily{phv}\fontsize{12}{18}\fontseries{m}% \fontshape{n}\selectfont% \uantwerpendocsprop{lastname} }; \foreach \nn in {0,1,...,33} { \draw[fill=white] (3,18) ++({0.5*\nn},0) rectangle +(0.5,0.8); } \node[anchor=south west,align=left,inner sep=0pt] at (3,17) {% \fontfamily{phv}\fontsize{12}{18}\fontseries{m}% \fontshape{n}\selectfont% \uantwerpendocsprop{firstname} }; \foreach \nn in {0,1,...,23} { \draw[fill=white] (3,16) ++({0.5*\nn},0) rectangle +(0.5,0.8); } \node[anchor=south west,align=left,inner sep=0pt] at (16,17) {% \fontfamily{phv}\fontsize{12}{18}\fontseries{m}% \fontshape{n}\selectfont% \uantwerpendocsprop{docketname} }; \foreach \nn in {0,1,...,7} { \draw[fill=white] (16,16) ++({0.5*\nn},0) rectangle +(0.5,0.8); } \node[anchor=south west,align=left,inner sep=0pt,text width=17cm] at (3,14) {% \fontfamily{phv}\fontsize{12}{21}\fontseries{m}% \fontshape{n}\selectfont% \uantwerpendocsprop{examdurationname}: \@examlength }; \node[anchor=south west,align=left,inner sep=0pt,text width=17cm] at (3,11) {% \fontfamily{phv}\fontsize{12}{15}\fontseries{m}% \fontshape{n}\selectfont% \begin{tabular}{@{}l@{}ll}% \uantwerpendocsprop{examstartname}& : & \@tstart\\ \uantwerpendocsprop{examendname} & : & \@tend \end{tabular} }; \node[anchor=south west,align=left,inner sep=0pt,text width=17cm] at (3,8) {% \fontfamily{phv}\fontsize{12}{21}\fontseries{m}% \fontshape{n}\selectfont% \roomsname: \jointrooms{, } }; \node [anchor=base west,uauamain, text width={\paperwidth-5cm},align=left,font=\LARGE] at (2.125,{\paperheight-6.5cm}) {\textsf{\textbf{\@author}}}; \fill[gray] (2.125,6) -- (\paperwidth,6) -- (\paperwidth,2.625) -- (2.55,2.625) arc (-90:-180:0.425) -- cycle; \node[white,anchor=west,align=left,font=\large] (SN) at (2.55,4.9) { \begin{tabular}{@{}l@{~\,}p{14.5cm}} \textsf{\lecturersname} & \textsf{\textbf{\jointlecturers{ | }}} \end{tabular} }; \node[white,anchor=west,text width=17.5cm,align=left,font=\small] at (2.55,3.7) {\textsf{\@degree{}}\\ \textsf{\textbf{\@faculty{}}}}; \node[anchor=west] at (2.125,1.313) {\includegraphics[width=4.75cm]{\logopos}}; \end{tikzpicture} } } ~\par\relax \clearpage \lfoot[\small \@shorttitle]{\small \@shorttitle} \rfoot[\small Groep \@examgroupnumber{} --- \@academicyear]{\small Groep \@examgroupnumber{} --- \@academicyear} \renewcommand*{\footrulewidth}{1pt} } % % \end{macrocode} % \end{macro} % % % \subsection{Auxiliary functions to typeset exams} % % \begin{macro}{\question} % Add a small box with the weight of the question on the current line % (right aligned). % % \begin{macrocode} %<*ex> \newcounter{question} \setcounter{question}{0} \renewcommand*\thequestion{\@arabic\c@question} \newcommand{\question}[1]{ \stepcounter{question} \thequestion.~#1% } % % \end{macrocode} % \end{macro} % % \begin{macro}{\questionweight} % Add a small box with the weight of the question on the current line % (right aligned). % % \begin{macrocode} %<*ex> \newcommand*{\questionweight}[1]{% \hspace{\fill} \begin{tabular}{|c|} \hline \small \uantwerpendocsprop{weightname}: #1\\ \hline \end{tabular}\\ } % % \end{macrocode} % \end{macro} % % \begin{macro}{\engdut} % typesets the question in two columns, the left column taking the % English variant of the question and the right column taking the % Dutch variant. % \changes{v2.1}{2018/06/20}{\@ Increased intercolumn spacing for engdut} % \begin{macrocode} %<*ex> \newcommand{\engdut}[2]{% \begin{tabular}{ccc}% \selectlanguage{english}% \begin{minipage}[t]{0.45\textwidth}% #1 \end{minipage}% &~~~& \selectlanguage{dutch}% \begin{minipage}[t]{0.45\textwidth}% #2 \end{minipage}% \end{tabular} \selectlanguage{english}% } % % \end{macrocode} % \end{macro} % % % \changes{v2.1}{2018/06/20}{Allow for setting the multiple choice % mark symbol} % \begin{macro}{\setmcsymbol} % sets the symbol to be used as multiple choice mark (by default a % square). % \begin{macrocode} %<*ex> \newcommand*\@mcsymbol{\square} \newcommand*\setmcsymbol[1]{\renewcommand\@mcsymbol{#1}} % % \end{macrocode} % \end{macro} % % \changes{v2.1}{2018/06/20}{Corrected erroneous line breaking} % \begin{macro}{\mc} % typesets a multiple choice answer candidate (monolingual, i.e. in a % single column). % \begin{macrocode} %<*ex> \newcommand\mc[1]{% \hfill\break\qquad\begin{tabular}{cc} $\@mcsymbol$ & \begin{minipage}[t]{0.9\textwidth}% #1 \end{minipage}% \end{tabular} } % % \end{macrocode} % \end{macro} % % \changes{v2.1}{2018/06/20}{Corrected erroneous line breaking} % % \begin{macro}{\engdutmc} % typesets a multiple choice answer candidate in two columns, the left % column taking the English variant of the question and the right % column taking the Dutch variant. % % \begin{macrocode} %<*ex> \newcommand{\engdutmc}[2]{% \hfill\break\begin{tabular}{cccc} $\@mcsymbol$ & \selectlanguage{english}% \begin{minipage}[t]{0.42\textwidth}% #1 \end{minipage}% &---& \selectlanguage{dutch}% \begin{minipage}[t]{0.42\textwidth}% #2 \end{minipage}% \end{tabular} \selectlanguage{english}% } % % \end{macrocode} % \end{macro} % % \begin{macro}{\insertsolutionspagepartial} % fills the remainder of the page with 'fill-out' squares. % as observing/controlling the current line position in \LaTeX{} is % not easiy, one has to provide the number of centimeters below the % bottom of the page, one wants to start the fill-out squares. % % \changes{v2.5}{}{Corrected for 'one page too early' in solutionspagepartial} % % \begin{macrocode} %<*ex> \newcommand\insertsolutionspagepartial[1]{ ~\relax \AddToShipoutPicture*{% \put(0,0){% \begin{tikzpicture} \clip (0,0) rectangle (21,#1); % \draw[densely dotted, step=0.5cm,black!20] (0.999,0.990) grid (20,1.5); \draw[densely dotted, step=0.5cm,black!20] (0.999,1.499) grid (2,2.5); \draw[densely dotted, step=0.5cm,black!20] (18.999,1.499) grid (20,2.5); \draw[densely dotted, step=0.5cm,black!20] (0.999,2.499) grid (20,27); \draw[densely dotted, step=0.5cm,black!20] (0.999,27) grid (16,28); \draw[densely dotted, step=0.5cm,black!20] (19.499,27) grid (20,28); \draw[densely dotted, step=0.5cm,black!20] (0.99,27.999) grid (20,28.5); \draw[ultra thick] (1,#1) -- (20,#1); \end{tikzpicture} } }% \clearpage \relax } % % \end{macrocode} % \end{macro} % % \begin{macro}{\insertsolutionspage} % inserts a full solutions page, i.e. flushes the current page and % inserts a full page with 'fill-out' squares. % The argument allows for specifying a watermark text (e.g. 'Scrap % paper'). % % \begin{macrocode} %<*ex> \newcommand\insertsolutionspage[1]{ \clearpage \AddToShipoutPicture*{% \put(0,0){% \begin{tikzpicture} \clip (0,0) rectangle (21,29.5); \draw[densely dotted, step=0.5cm,black!20] (0.999,1.499) grid (2,2.5); \draw[densely dotted, step=0.5cm,black!20] (18.999,1.499) grid (20,2.5); \draw[densely dotted, step=0.5cm,black!20] (0.999,2.499) grid (20,28); \draw[densely dotted, step=0.5cm,black!20] (0.999,28) grid (16,28.5); \draw[densely dotted, step=0.5cm,black!20] (19.499,28) grid (20,28.5); \end{tikzpicture} } \put(120,150){\rotatebox{60}{\textcolor{watermark}{ \fontfamily{phv}\fontsize{105}{130}\fontseries{m}\fontshape{n}\selectfont #1} } } }% ~\relax } % % \end{macrocode} % \end{macro} % % We add a lastpage label to the final page % \begin{macrocode} %<*ex> \AtEndDocument{ \label{lastpage} } % % \end{macrocode % % \subsection{References} % \begin{macrocode} %<*ct|bmt|pt|rp> \AtBeginDocument{ \@ifpackageloaded{hyperref}{ \hypersetup{ breaklinks=true, colorlinks=true, citecolor=black, filecolor=black, linkcolor=black, pageanchor=true, pdfpagemode=UseOutlines, urlcolor=black, pdftitle={\@title}, pdfsubject={\@subtitle}, pdfauthor={\@author} } }{} } % % \end{macrocode} % % \section{The beamer theme} % \subsection{User guide} % % \begin{verbatim} %<*bmrug> \documentclass[aspectratio=1610]{beamer} \usetheme[ti]{uantwerpen} \usepackage[english]{babel} % The packages below are for demonstration purpose only. % They are not required for the template to work \usepackage{metalogo} \usepackage{kantlipsum} \usepackage{pgfplots} \usepackage{booktabs} % some stuff to typeset code \newcommand*\command[1]{{\tt \textbackslash #1}} \NewEnviron{codesnippet}[1][0.8\textwidth]{ \scriptsize \qquad\framebox[#1][l]{\texttt{ \setlength\textwidth{#1} \begin{minipage}{0.9\textwidth} \BODY \end{minipage} } } } \newcommand*\ind[1][2ex]{\hspace*{#1}} \newcommand*\bframe[1][]{\command{begin}\{#1frame\}} \newcommand*\eframe[1][]{\command{end}\{#1frame\}} \title{This is your \texttt{\textbackslash{}title{}}} \subtitle[my short title]{This is your \texttt{\textbackslash{}subtitle{}}} \date[my short date]{This is your \texttt{\textbackslash{}date{}}} \author[my short author]{This is your \texttt{\textbackslash{}author{}}} \begin{document} \begin{frame}[negativefill] \maketitle \end{frame} \begin{frame} \maketitle \end{frame} \begin{frame}[negative] \maketitle \end{frame} \begin{frame} {What's on the menu?} {Bon app\'etit!} ~\\ \tableofcontents \end{frame} \section{Loading the theme and theme options} \begin{frame}[negative] \sectionpage \end{frame} \begin{frame} {Using our beamer theme} The \texttt{uantwerpen} beamer theme is distributed by CTAN. It should be installed with your \TeX{} distribution by default. You can load the package in your preamble as: \begin{codesnippet} \command{documentclass}[aspectratio=1610]\{beamer\}\\ \command{usetheme}[theme-options-go-here]\{uantwerpen\}\\ \command{usepackage}[english]\{babel\} \end{codesnippet} \heading{Remarks} \begin{itemize} \item The theme behaves well for all supported beamer aspect ratios. \item $16\times 10$ is currently your best option to maximize your slide size given a modern LCD-projector! \item Only \texttt{dutch} and \texttt{english} are supported. The correct logoware is selected using the babel language option! \end{itemize} \end{frame} \begin{l3qframe}[t,rqgraphic={ \begin{minipage}{0.35\textwidth} \footnotesize \begin{center} \begin{tabular}{c} \toprule \bfseries option\\ \midrule \tt be \\ \tt fbd \\ \tt ggw \\ \tt lw \\ \tt ow \\ \tt re \\ \tt sw \\ \tt ti \\ \tt we \\ \tt iob \\ \bottomrule \end{tabular} \end{center} \end{minipage} }] {Theme options}{} The following theme options may come in handy: \begin{description} \item[\tt X] to invoke your own faculty's colors and logos, with X one of the options in the table on the right\\ (I assume you know your faculty abbreviation) \item[\tt nofonts] disables font loading, so you can load your own fonts \item[\tt rgb] to select RGB color encoding (best for projecting, default) \item[\tt cmyk] to select CMYK color encoding (best for printing) \item[\tt neutralcolors] to disable your faculty colors and use the standard UAntwerpen colors \end{description} \medskip The defaults of the theme are: \begin{itemize} \item no faculty option ($\Rightarrow$ standard UAntwerpen logos) \item \texttt{rgb} \end{itemize} \end{l3qframe} \begin{frame}[t] {A note on the compiler you are using} {Fonts galore} Depending on the type of compiler you use, a different font scheme is loaded: \begin{description} \item[\LaTeX] --- ancient compiler - no support\\ Don't use! \item[pdf\LaTeX] --- very old school compiler - no OTF/TTF support\\ Computer Modern Sans Serif is used as font \item[\XeLaTeX] --- old school compiler - the first to have OTF/TTF support\\ Calibri is used as font (with cmbright math fonts) \item[\LuaLaTeX] --- current compiler - your best option\\ Calibri is used as font (with cmbright math fonts) \end{description} \end{frame} \section{Title slides} \begin{frame}[negative] \sectionpage \end{frame} \begin{frame}[t] {Title slides} \heading{Contents} --- The contents of the title slide can be set in your preamble using the classical \LaTeX{} commands: \begin{itemize} \item \command{title\{\}} \item \command{subtitle}\{\} \item \command{author\{\}} \item \command{date\{\}} \end{itemize} We don't specify an institute, as the logos do so. \heading{Code} --- The titleslide is easily typeset as:\\ \begin{codesnippet} \bframe[][option]\\ \ind\command{maketitle}\\ \eframe \end{codesnippet} with no option, or one of: \texttt{normal}, \texttt{negative}, \texttt{negativefill}. \end{frame} \section{Regular slides} \subsection{Bare} \begin{frame}[negative] \sectionpage \end{frame} \begin{frame}[negative] \subsectionpage \end{frame} \begin{frame}[t] {Frame titles} {And subtitles} \heading{How to specify them!}\\ Titles are specified using \command{frametitle\{\}} or \command{framesubtitle\{\}} or even easier as first and second argument to the \texttt{frame} environment (or their derived versions). \begin{codesnippet} \bframe[][options go here, comma separated]\\ \ind\{first argument\}\\ \ind\{second argument\}\\ \ind frame contents \\ \eframe \end{codesnippet} \bigskip \heading{Don't need them?}\\ If you need a slide without titles: just don't specify them! \heading{Want to get rid of the footer as well?}\\ Specify the \texttt{plain} option to the frame. \end{frame} \begin{frame}[t] {The canvas} \heading{Flavors} --- The canvas of the slide has four flavors: \begin{description} \item[normal] the ordinary white background slide \item[negativefill] a reverse video slide on a background (in maincolor) without white margins \item[negative] a reverse video slide on a bakcground (in maincolor) with white margins \item[graphicfill] a graphic canvas without white margins (graphic can be photo, graph, \ldots) \item[graphic] a graphic canvas with white margins (graphic can be anything) \end{description} They are specified as options to the frame environment (or its derivatives). \heading{Remarks} \begin{itemize} \item You don't need to specify the normal canvas, it is the default. \item In handout mode the negative and negativefill canvas will be typeset as normal canvas (to allow for easy printing). \item The graphic option has many variants that we will discuss later. \end{itemize} \end{frame} \begin{frame}[negativefill] {A negativefill slide} {with a subtle subtitle} \kant[1] \end{frame} \begin{frame}[negative,t] {A negative slide} {with a subtle subtitle} Don't do this! Don't use a title and subtitle, nor straight text but put material on this slide that does not touch or cross the edges of the background!\\ E.g., the graph on the bottom right \place[anchor=south east] at (0.9,0.1) { \begin{tikzpicture}[white] \begin{axis} [width=4cm,height=5cm,grid=both,font=\footnotesize] \addplot[white] {x^2}; \end{axis} \end{tikzpicture} } The best advice is not to reserve this canvas for title frames and intermission slides. \end{frame} \begin{frame}[t] {Vertical alignment} You can easily specify the vertical alignment of your frame contents, using the options \begin{description} \item[\texttt{t}] for top \item[\texttt{c}] for center \item[\texttt{b}] for bottom \end{description} Example:\\[1ex] \begin{codesnippet} \bframe[][t]\\ \ind\{Title\}\\ \ind\{Subtitle\}\\ \ind frame contents\\ \eframe \end{codesnippet} \end{frame} \begin{frame}[t] {Colors} {What a wonderful world} \heading{Standard colors}\\ You can select the theme colors using:\\ \textcolor{maincolor}{Main color}: can be specified as \LaTeX-color \emph{maincolor}\\ \textcolor{sidecolor}{Side color}: can be specified as \LaTeX-color \emph{sidecolor}\\ \textcolor{basecolor}{Base color}: can be specified as \LaTeX-color \emph{basecolor} \heading{Advice}\\ \begin{itemize} \item Stick to the standard colors or use grayscale tints! \item Only use color when functional (e.g. in graphs) \end{itemize} \heading{Alert} You can use \alert{\command{alert{}}} to grab the attention of the user. It will typeset your content in \alert{red}. \heading{Not taking any advice?}\\ You can fiddle with the colors, but do so in smart way. Use \command{setbeamercolor}. You can see how it is used in the \texttt{beamercolorthemeuantwerpen.sty} file. \end{frame} \begin{frame}[t] {Logo demo} The logo's can be used as follows (but you should not need them): \begin{itemize} \item \command{includegraphics[width=3cm]\{\command{logopos}\}}\\ \begin{center} \begin{tikzpicture} \draw[fill,white] (0,0) rectangle node {\includegraphics[width=3cm]{\logopos}} (4,1.25); \end{tikzpicture} \end{center} \item \command{includegraphics[width=3cm]\{\command{logoneg}\}}\\ \begin{center} \begin{tikzpicture} \draw[fill] (0,0) rectangle node {\includegraphics[width=3cm]{\logoneg}} (4,1.25); \end{tikzpicture} \end{center} \item \command{includegraphics[width=3cm]\{\command{logomonowhite}\}}\\ \begin{center} \begin{tikzpicture} \draw[fill] (0,0) rectangle node {\includegraphics[width=3cm]{\logomonowhite}} (4,1.25); \end{tikzpicture} \end{center} \end{itemize} \end{frame} \subsection{With graphic eye candy} \begin{frame}[negative] \subsectionpage \end{frame} \begin{frame}[t] {Basic idea} \heading{The idea} --- put support material (photo or graph) on the slide next to the frame content. This is done by \begin{itemize} \item specifying an appropriate canvas \item using an appropriate frame derivative \end{itemize} \heading{Good combinations} \begin{center}\small \begin{tabular}{ccc} \toprule \bf frame option & \bf graphic on frame & \bf corresponding frame derivative\\ \midrule lqgraphic & left quarter & r3qframe \\ rqgraphic & right quarter & l3qframe \\ lhgraphic & left half & rhframe \\ rhgraphic & right half & lhframe \\ thgraphic & top half & bhframe \\ bhgraphic & bottom half & thframe\\ \bottomrule \end{tabular} \end{center} \end{frame} \begin{l3qframe}[rqgraphic] {Some Random Title} {Please, adapt!} \small The slide has been typeset as:\\ \begin{codesnippet}[\textwidth] \bframe[l3q][rqgraphic=\{\}]\\ \ind\{Title\}\\ \ind\{Subtitle\}\\ \ind frame contents\\ \eframe[l3q] \end{codesnippet} \smallskip \subheading{Remarks} \begin{itemize} \item Load photo as:\\ \command{includegraphics[width=0.25\command{paperwidth}, min height=\command{textheight}] \{image.jpg\}} \item If \texttt{rqgraphic} is specified without argument, a standard photo is loaded. \item Note: you can avoid rounding the corner using the frame option \texttt{noround} (may be useful when not using a photo) \end{itemize} \end{l3qframe} \begin{r3qframe}[lqgraphic,t] {Some Random Title} {Please, adapt!} \small The slide has been typeset as:\\ \begin{codesnippet}[\textwidth] \bframe[r3q][lqgraphic=\{\}]\\ \ind\{Title\}\\ \ind\{Subtitle\}\\ \ind frame contents\\ \eframe[r3q] \end{codesnippet} \smallskip \subheading{Remarks} \begin{itemize} \item Load photo as:\\ \command{includegraphics[width=0.25\command{paperwidth}, min height=\command{textheight}] \{image.jpg\}} \item If \texttt{rqgraphic} is specified without argument, a standard photo is loaded. \item Note: you can avoid rounding the corner using the frame option \texttt{noround} (may be useful when not using a photo) \end{itemize} \end{r3qframe} \begin{lhframe}[rhgraphic] {Some Random Title} \small The slide has been typeset as:\\ \begin{codesnippet}[\textwidth] \bframe[lh][rhgraphic=\{\}]\\ \ind\{Title\}\\ \ind\{Subtitle\}\\ \ind frame contents\\ \eframe[lh] \end{codesnippet} \smallskip \subheading{Remarks} \begin{itemize} \item Load photo as:\\ \command{includegraphics[min width=0.5\command{paperwidth}, min height=\command{textheight}] \{image.jpg\}} \item If \texttt{rqgraphic} is specified without argument, a standard photo is loaded. \item Note: avoid rounding the corner using \texttt{noround} \end{itemize} \end{lhframe} \begin{rhframe}[lhgraphic,t] {Some Random Title} \small The slide has been typeset as:\\ \begin{codesnippet}[\textwidth] \bframe[rh][lhgraphic=\{\}]\\ \ind\{Title\}\\ \ind\{Subtitle\}\\ \ind frame contents\\ \eframe[rh] \end{codesnippet} \smallskip \subheading{Remarks} \begin{itemize} \item Load photo as:\\ \command{includegraphics[min width=0.5\command{paperwidth}, min height=\command{textheight}] \{image.jpg\}} \item If \texttt{rqgraphic} is specified without argument, a standard photo is loaded. \item Note: avoid rounding the corner using \texttt{noround} \end{itemize} \end{rhframe} \begin{bhframe}[thgraphic,t] {Some Random Title}{Please, adapt!} \small The slide has been typeset as: \begin{codesnippet}[\textwidth] \bframe[bh][thgraphic=\{\}]\\ \ind\{Title\}\\ \ind\{Subtitle\}\\ \ind frame contents\\ \eframe[bh] \end{codesnippet} \end{bhframe} \begin{thframe}[bhgraphic,t] {Some Random Title} {Please, adapt!} \small The slide has been typeset as: \begin{codesnippet}[\textwidth] \bframe[th][bhgraphic=\{\}]\\ \ind\{Title\}\\ \ind\{Subtitle\}\\ \ind frame contents\\ \eframe[th] \end{codesnippet} \end{thframe} \section{Intermission slides} \begin{frame}[negative] \sectionpage \end{frame} \subsection{Standard section slides} \begin{frame}[negative] \subsectionpage \end{frame} \begin{frame}[t] {Basic idea} You can select any of the canvas templates: negative, negativefill, graphic, graphicfill and normal, and combine it with: \begin{description} \item[\command{sectionpage}] \item[\command{subsectionpage}] \end{description} Example:\\[1ex] \begin{codesnippet}[0.8\textwidth] \bframe[][negative]\\ \ind \command{sectionpage}\\ \eframe\\~\\ \bframe[][negative]\\ \ind \command{subsectionpage}\\ \eframe \end{codesnippet}\\[1ex] (this how the previous two slide were generated) \end{frame} \subsection{Custom intermission slides} \begin{frame}[negative] \subsectionpage \end{frame} \begin{frame}[t] {Basic idea} If you are a fan of graphic material in slideware, you can use a \texttt{graphic} or \texttt{graphicfill} canvas in combination with small snippets you put on the slide using\\[1ex] \qquad\command{place[node options] at (x,y) \{\}}\\[1ex] with \begin{itemize} \item $(x,y)=(0,0)$ the bottom left of the slide and $(1,1)$ the top right of the slide \item \texttt{node options} any options you want to hand over to the tikz node that is used to position the material. \end{itemize} \medskip E.g., the next slide was created using:\\[1ex] \begin{codesnippet}[0.8\textwidth] \bframe[][graphic,t]\\ \ind\command{place} at (0.5,0.5) \{\command{uantwerpenicon[scale=0.8]}\}\\ \eframe \end{codesnippet} \medskip You will have to run \LaTeX{} twice in order for the position to be correct! \end{frame} \begin{frame}[graphic,t] \place at (0.5,0.5) {\uantwerpenicon[scale=0.8]} \end{frame} \begin{frame}[t] {Shading photographs} Often you need make a photograph a little bit more opaque in order for the (white) text to readable. To this end you can use the following command\\[1ex] \qquad\command{darken[s]\{\}}\\[1ex] with $s$ a value between 0 and 1 to specify the level of darkening. E.g., the next slide was created using: \begin{codesnippet}[0.9\textwidth] \bframe[][graphicfill=\{\command{darken}% [0.25]\{\command{includegraphics}% [scale=0.1,min width=\command{paperwidth},min height=\command{paperheight}]% \{Images/uantwerpen-09.jpg\}\},t]\\ \command{place} [anchor=north east] at (0.95,0.5) \{\\ \ind\command{uantwerpencallout}\{3\}\{2.5\}\{\\ \ind\ind\command{bfseries} You cannot be serious!\textbackslash\textbackslash[1ex]\\ \ind\ind John McEnroe\}\\ \}\\ \eframe \end{codesnippet} \end{frame} \begin{frame}[graphicfill={\darken[0.25]% {\includegraphics[scale=0.1,min width=\paperwidth,min height=\paperheight]% {Images/uantwerpen-09.jpg}}},t] \place [anchor=north east] at (0.95,0.5) { \uantwerpencallout{3}{2.5}{ \bfseries You cannot be serious!\\[1ex] John McEnroe} } \end{frame} \begin{frame}[t] {Shading photographs locally} You can also choose to shade the local backdrop of the material you put on the side. If you like the \command{uantwerpencallout} command of the previous slide, you can give it an optional argument to set the fill opacity of the backdrop behind the text. E.g., the next slide was created using: \begin{codesnippet}[0.9\textwidth] \bframe[][graphic,t]\\ \ind\command{place} [anchor=north west] at (0.1,0.9) \{\\ \ind\ind\command{uantwerpencallout}[fill opacity=0.5]\{4.5\}\{2.5\}\{\\ \ind\ind\ind\command{bfseries} I'll be back!\textbackslash\textbackslash[1ex]\\ \ind\ind\ind Arnold Schwarzenegger\}\\ \} \eframe \end{codesnippet} \medskip The \command{uantwerpencallout} command has te following syntax:\\[1ex] \qquad\command{uantwerpencallout[options]\{width\}\{height\}\{contents\}} \medskip Remember to run \LaTeX{} twice in order for the position of the callout to be correct! \end{frame} \begin{frame}[graphic,t] \place [anchor=north west] at (0.1,0.9) { \uantwerpencallout[fill opacity=0.5]{4.5}{2.5}{ \bfseries I'll be back!\\[1ex] Arnold Schwarzenegger} } \end{frame} \section{Demo of some inner theme parts} \begin{frame}[negative] \sectionpage \end{frame} \begin{frame}[t] {Headings} {on two levels} You can set headings on two levels, by using \begin{itemize} \item\command{heading\{\}} \item\command{subheading\{\}} \end{itemize} \heading{Main subject}~\\ blabla \subheading{Subtopic 1}~\\ blabla \subheading{Subtopic 2}~\\ blabla \heading{Next main subject}~\\ blabla \end{frame} \newcommand\listdemo[1][itemize]{ \begin{#1} \item First level \begin{#1} \item Second level \begin{#1} \item Third level \end{#1} \end{#1} \end{#1} } \begin{frame}[t] {Itemize / enumerations} {Different styles} Usage:\\ Set them (in your preamble) using: \command{setbeamertemplate\{itemize items\}[triangle]}\\ The default of the uantwerpen beamer template is set to \texttt{square} to be similar to our logo. \medskip \begin{columns} \column[T]{0.3\textwidth} \alert{default} \setbeamertemplate{itemize items}[default] \listdemo \column[T]{0.3\textwidth} \alert{triangle} \setbeamertemplate{itemize items}[triangle] \listdemo \column[T]{0.3\textwidth} \alert{circle} \setbeamertemplate{itemize items}[circle] \listdemo \end{columns}~\\ \bigskip \begin{columns} \column[T]{0.3\textwidth} \alert{ball} \setbeamertemplate{itemize items}[ball] \listdemo \column[T]{0.3\textwidth} \alert{square} \setbeamertemplate{itemize items}[square] \listdemo \column[T]{0.3\textwidth} \alert{enumeration} \setbeamertemplate{itemize items}[circle] \listdemo[enumerate] \end{columns} \end{frame} \section{Advanced material} \begin{frame}[negative] \sectionpage \end{frame} \begin{frame}[t] {Customizing the template} If you want to override logos/colors to create a template for your own research group or department: renew the commands below. The redefinitions must be put just after the \command{begin\{document\}} statement.\\ The construction below allows you to put the stuff in a style file that you must load after (!) the \command{usetheme} command.\\[1ex] \begin{codesnippet}[0.95\textwidth] \command{AtBeginDocument\{}\\ \ind\command{renewcommand*}\command{logopos\{your-pos-logo-filename-here\}}\\ \ind\command{renewcommand*}\command{logoneg\{your-negative-logo-filename-here\}}\\ \ind\command{renewcommand*}\command{logomonowhite\{your-mono-logo-filename-here\}}\\ \ind\command{renewcommand*}\command{iconfile\{your-icon-filename-here\}}\\ \ind\command{colorlet\{maincolor\}\{your-favorite-color\}}\\ \ind\command{colorlet\{sidecolor\}\{your-secondfavorite-color\}}\\ \ind\command{colorlet\{basecolor\}\{some-solid-color\}}\\ \} \end{codesnippet}~\\[1ex] \end{frame} \begin{frame} {Some genuine advice} \small Dear user, Candy slides are nice for PR, but bad for conveying a message. Beamer is a tool to typeset technical presentations. Need more animation and eye candy? Use other tools. They are much easier in ruining your audiences' day. Effective slides are simple slides.\\ Go by cognitive consonance, flirt with cognitive dissonance, but stay away from cognitive cacophony. This presentation is i.m.ho. a bad one, as it shows the cacophony of possibilities. But hey, you were the one asking for it. A lot of effort has gone into this template. I hope you like it. If you have good suggestions, e-mail me. If you have questions, I might even help you. Cheers! Walter Daems\\ (March 2021) \end{frame} \end{document} % % \end{verbatim} % % \subsection{Implementation} % % \subsubsection{Main beamer theme} % % \begin{macrocode} %<*bmr> % Copyright 2021 by Walter Daems % % This file may be distributed and/or modified % % 1. under the LaTeX Project Public License and/or % 2. under the GNU Public License. % % See the file doc/licenses/LICENSE for more details. \newif\if@nofonts \@nofontsfalse \DeclareOption{nofonts}{\@nofontstrue} \input{uantwerpencommonoptions.clo} \ProcessOptions \RequirePackage{uantwerpencolorlogoscheme} \AtBeginDocument{ \def\appropriatelogo{\logopos} \def\appropriateslidenumber{% \usebeamercolor{pageno in head/foot}% \insertframenumber/\inserttotalframenumber}% } \mode \RequirePackage{tikz} \RequirePackage{graphicx} \RequirePackage[export]{adjustbox} \RequirePackage{environ} \setbeamersize{ text margin left=.8cm, text margin right=.8cm } \usecolortheme{uantwerpen} \usefonttheme{uantwerpen} \useinnertheme{uantwerpen} \useoutertheme{uantwerpen} \setbeamertemplate{navigation symbols}{} \setbeamertemplate{blocks}[rounded][shadow=true] \mode % % \end{macrocode} % % \subsubsection{Beamer color theme} % \begin{macrocode} %<*bmrcolor> % Copyright 2021 by Walter Daems % % This file may be distributed and/or modified % % 1. under the LaTeX Project Public License and/or % 2. under the GNU Public License. % % See the file doc/licenses/LICENSE for more details. \mode \RequirePackage{uantwerpencolorlogoscheme} %% define main color \setbeamercolor{palette primary}{fg=maincolor} \setbeamercolor{palette secondary}{fg=sidecolor} \setbeamercolor{palette tertiary}{fg=uauaside} \setbeamercolor{palette quaternary}{fg=uauamain} \setbeamercolor{normal text}{fg=basecolor} \setbeamercolor{inverse normal text}{fg=white!95!maincolor} \setbeamercolor{alerted text}{fg=uauamain} \setbeamercolor{example text}{} \setbeamercolor{heading}{fg=basecolor} \setbeamercolor{subheading}{fg=basecolor} \setbeamercolor{inverse heading}{fg=white} \setbeamercolor{inverse subheading}{fg=white!75!maincolor} \setbeamercolor{block body}{bg=black!4} \setbeamercolor{block title}{bg=black!8} \setbeamercolor{itemize item}{parent=normal text} \setbeamercolor{enumerate item}{parent=normal text} \setbeamercolor{itemize subitem}{parent=normal text} \setbeamercolor{enumerate subitem}{parent=normal text} \setbeamercolor{itemize subsubitem}{parent=normal text} \setbeamercolor{enumerate subsubitem}{parent=normal text} \setbeamercolor{frametitle}{fg=maincolor} \setbeamercolor{framesubtitle}{fg=sidecolor} \setbeamercolor{inverse frametitle}{fg=white} \setbeamercolor{inverse framesubtitle}{fg=white!80!maincolor} \setbeamercolor{title in title page}{fg=maincolor} \setbeamercolor{subtitle in title page}{fg=sidecolor} \setbeamercolor{author in title page}{fg=maincolor} \setbeamercolor{date in title page}{fg=sidecolor} \setbeamercolor{inverse title in title page}{fg=white} \setbeamercolor{inverse subtitle in title page}{fg=white!75!maincolor} \setbeamercolor{inverse author in title page}{fg=white} \setbeamercolor{inverse date in title page}{fg=white!75!maincolor} \setbeamercolor{pageno in head/foot}{fg=basecolor} \setbeamercolor{inverse pageno in head/foot}{fg=white} \setbeamercolor{section in toc}{fg=basecolor} \setbeamercolor{subsection in toc}{fg=basecolor} \setbeamercolor{section number projected}{fg=white,bg=basecolor} \setbeamercolor{subsection number projected}{fg=white,bg=basecolor} \setbeamercolor{section title}{fg=maincolor} \setbeamercolor{section name}{fg=maincolor} \setbeamercolor{inverse section title}{fg=white} \setbeamercolor{inverse section name}{fg=white} \setbeamercolor{subsection title}{fg=sidecolor} \setbeamercolor{subsection name}{fg=sidecolor} \setbeamercolor{inverse subsection title}{fg=white!75!maincolor} \setbeamercolor{inverse subsection name}{fg=white!75!maincolor} \mode % % \end{macrocode} % % \subsubsection{Beamer font theme} % % \begin{macrocode} %<*bmrfont> % Copyright 2021 by Walter Daems % % This file may be distributed and/or modified % % 1. under the LaTeX Project Public License and/or % 2. under the GNU Public License. % % See the file doc/licenses/LICENSE for more details. \usetikzlibrary{calc} \if@nofonts \else \RequirePackage{iftex} % Uncomment the following line if in MiKTeX you get the error % message that \ifluatex is already defined. % You first option is to update all your packages both in user as in % admin mode to fix your setup. % Your second option is to avoid the warning uncommenting the % following line: % \let\ifluatex\relax \iftutex \usepackage{cmbright} \usefonttheme{serif} \usepackage{fontspec} \setmainfont{Calibri} \usepackage{sansmathaccent} \fi \fi \usepackage{bm} \mode \setbeamerfont{normal text}{} % ignored currently \setbeamerfont{alerted text}{} \setbeamerfont{example text}{} \setbeamerfont{structure}{} \setbeamerfont{tiny structure}{size=\tiny} \setbeamerfont{title}{size=\large,parent=structure} \setbeamerfont{title in head/foot}{} \setbeamerfont{title in sidebar}{size=\tiny} \setbeamerfont{pageno in head/foot}{size=\tiny} \setbeamerfont{subtitle}{size=\small,parent=title} \setbeamerfont{author}{} \setbeamerfont{author in head/foot}{} \setbeamerfont{author in sidebar}{size=\tiny} \setbeamerfont{date}{} \setbeamerfont{date in head/foot}{} \setbeamerfont{date in sidebar}{} \setbeamerfont{part name}{size=\LARGE} \setbeamerfont{part title}{size=\LARGE,parent=title} \setbeamerfont{section name}{size=\Large} \setbeamerfont{section title}{size=\Large,parent=title} \setbeamerfont{section in toc}{parent=structure} \setbeamerfont{section in toc shaded}{parent=section in toc} \setbeamerfont{section in head/foot}{} \setbeamerfont{section in sidebar}{size=\tiny} \setbeamerfont{section number projected} {size=\small,parent={section in toc,projected text}} \setbeamerfont{subsection name}{size=\large} \setbeamerfont{subsection title}{size=\large,parent=title} \setbeamerfont{subsection in toc}{} \setbeamerfont{subsection in toc shaded}{parent=subsection in toc} \setbeamerfont{subsection in head/foot}{} \setbeamerfont{subsection in sidebar}{} \setbeamerfont{subsubsection in toc}{size=\footnotesize} \setbeamerfont{subsubsection in toc shaded}{parent=subsubsection in toc} \setbeamerfont{subsubsection in head/foot}{} \setbeamerfont{subsubsection in sidebar}{} \setbeamerfont{headline}{parent={tiny structure}} \setbeamerfont{footline}{parent={tiny structure}} \setbeamerfont{frametitle} {parent=structure,size=\renewcommand*{\baselinestretch}{0.85}\LARGE\bfseries} \setbeamerfont{framesubtitle}{parent=frametitle,size=\normalsize\bfseries} \setbeamerfont{caption}{size=\small} \setbeamerfont{caption name}{parent={structure,caption}} \setbeamerfont{button}{size=\tiny} \setbeamerfont{block body}{size=\scriptsize} \setbeamerfont{block body alerted}{parent={block body}} \setbeamerfont{block body example}{parent={block body}} \setbeamerfont{block title}{size=\small,parent={structure,block body}} \setbeamerfont{block title alerted}{parent={block title,alerted text}} \setbeamerfont{block title example}{parent={block title,example text}} \setbeamerfont{item}{parent=structure} \setbeamerfont{subitem}{parent=item} \setbeamerfont{subsubitem}{parent=subitem} \setbeamerfont{item projected}{size=\tiny,parent={item,projected text}} \setbeamerfont{subitem projected}{parent=item projected} \setbeamerfont{subsubitem projected}{parent=subitem projected} \setbeamerfont{itemize item}{parent=item} \setbeamerfont{itemize subitem}{parent=subitem} \setbeamerfont{itemize subsubitem}{parent=subsubitem} \setbeamerfont{enumerate item}{parent=item} \setbeamerfont{enumerate subitem}{parent=subitem} \setbeamerfont{enumerate subsubitem}{parent=subsubitem} \setbeamerfont{itemize/enumerate body}{} \setbeamerfont{itemize/enumerate subbody}{size=\small} \setbeamerfont{itemize/enumerate subsubbody}{size=\footnotesize} \setbeamerfont{description item}{parent=item} \setbeamerfont{projected text}{parent={tiny structure}} \setbeamerfont{abstract}{size=\small} \setbeamerfont{abstract title}{parent={abstract,structure},size=\normalsize} \setbeamerfont{verse}{family=\rmfamily,shape=\itshape} \setbeamerfont{quotation}{shape=\itshape} \setbeamerfont{quote}{parent=quotation} \setbeamerfont{note page}{size=\small} \mode % % \end{macrocode} % % \subsubsection{Beamer inner theme} % % \begin{macrocode} %<*bmrinner> % Copyright 2021 by Walter Daems % % This file may be distributed and/or modified % % 1. under the LaTeX Project Public License and/or % 2. under the GNU Public License. % % See the file doc/licenses/LICENSE for more details. \mode \setlength\parskip{0.5\baselineskip} \setlength\parindent{0em} % use square (can also be circle or ball \setbeamertemplate{sections/subsections in toc}[square] \setbeamertemplate{itemize items}[square] %\setbeamertemplate{description item}[align left] \newif\if@noround \@noroundfalse \newcommand*\uantwerpenleftshape[3][]{ \newcommand\mycradius{0.05*(\getlength{\paperheight}-1.6)}% \coordinate (bl) at #2; \coordinate (tr) at #3; \if@noround \path[#1] (bl) rectangle (tr); \else \path[#1] (bl|-tr) -- (tr) -- (bl-|tr) -- ($(bl)+({\mycradius},0)$) arc(-90:-180:{\mycradius}) -- cycle; \fi } \newcommand*\uantwerpenrightshape[3][]{ \newcommand\mycradius{0.05*(\getlength{\paperheight}-1.6)}% \coordinate (bl) at #2; \coordinate (tr) at #3; \if@noround \path[#1] (bl) rectangle (tr); \else \path[#1] (bl|-tr) -- (tr) -- ($(bl-|tr)+(0,{\mycradius})$) arc(0:-90:{\mycradius}) -- (bl) -- cycle; \fi } \newcommand*\darken[2][0.5]{% \begin{tikzpicture}[inner sep=0pt,outer sep=0pt] \node (a) {#2}; \fill[fill=black,opacity=#1] (a.south west) rectangle (a.north east); \end{tikzpicture} } \newcommand\uantwerpencallout[4][]{ \begin{tikzpicture} \uantwerpenleftshape[fill=black,fill opacity=0.0,text opacity=1,text=white,#1]{({-#2/2},-{#3/2})}{({#2/2},{#3/2})} \node[align=left,anchor=center] at (0,0) { \callout\\ #4 }; \end{tikzpicture} } \newcommand\callout[1][scale=0.70711]{ \begin{tikzpicture}[#1] \fill[maincolor] (0.4,0) -- (0.5,0) -- (0.75,-0.15) -- (0.75,0) -- (0.9,0) arc(-90:0:0.1) -- (1,0.65) arc(0:90:0.1) -- (0.1,0.75) arc (90:180:0.1) -- (0,0.1) arc(-180:-90:0.1) -- cycle; \foreach \x in {0.35,0.7} { \begin{scope}[shift={(\x,0.425)},scale=0.25] \fill[white] (0,0) circle[radius=0.5]; \fill[white] (0.5,0) arc(0:-90:1) -- (-0.5,-0.725) arc(-90:0:0.725) -- cycle; \end{scope} } \end{tikzpicture} } \newcommand*\uantwerpenicon[1][scale=1]{ \includegraphics[#1]{\iconfile} } \newcommand\heading[1]{\par{\usebeamercolor{\maybeinverse heading}\color{fg}{\small\bfseries #1~}}} \newcommand\subheading[1]{\par{ \usebeamercolor{\maybeinverse subheading}\color{fg}{\footnotesize\it\bfseries #1~}}} \mode % % \end{macrocode} % % \subsubsection{Beamer outer theme} % % \begin{macrocode} %<*bmrouter> % Copyright 2021 by Walter Daems % % This file may be distributed and/or modified % % 1. under the LaTeX Project Public License and/or % 2. under the GNU Public License. % % See the file doc/licenses/LICENSE for more details. \mode \newcommand*\getlength[1]{\strip@pt#1/28.45274} \newcommand*\pw{\getlength{\paperwidth}}% \newcommand*\ph{\getlength{\paperheight}}% \newif\if@rhtext \@rhtextfalse \newif\if@lhtext \@lhtextfalse \newif\if@rqtext \@rqtextfalse \newif\if@lqtext \@lqtextfalse \newif\if@bhtext \@bhtextfalse \gdef\maybeinverse{} \define@key{beamerframe}{noround}[true]{ \expandafter\csname @noround#1\endcsname } \define@key{beamerframe}{normal}[true]{ \setbeamertemplate{title page}[main] \setbeamertemplate{section page}[main]% \setbeamertemplate{subsection page}[main]% \setbeamertemplate{background canvas}[normal] \gdef\maybeinverse{} } \mode \define@key{beamerframe}{negativefill}[true]{ } \define@key{beamerframe}{negative}[true]{ } \mode \mode \define@key{beamerframe}{negativefill}[true]{ \gdef\maybeinverse{inverse }% \usebeamercolor[fg]{\maybeinverse normal text}% \setbeamertemplate{title page}[negativefill] \setbeamertemplate{section page}[negative]% \setbeamertemplate{subsection page}[negative]% \setbeamertemplate{background canvas}[negativefill]% } \define@key{beamerframe}{negative}[true]{ \gdef\maybeinverse{inverse }% \usebeamercolor[fg]{\maybeinverse normal text}% \setbeamertemplate{title page}[negative] \setbeamertemplate{section page}[negative]% \setbeamertemplate{subsection page}[negative]% \setbeamertemplate{background canvas}[negative]% } \mode \define@key{beamerframe}{graphicfill}[{\includegraphics[scale=0.1,min width=\paperwidth,min height=\paperheight]{Images/uantwerpen-01.jpg}}]{ \gdef\maybeinverse{inverse }% \usebeamercolor[fg]{\maybeinverse normal text}% \setbeamertemplate{background canvas}[graphicfill]{#1} } \define@key{beamerframe}{graphic}[{\includegraphics[scale=0.1,min width=\textwidth,min height=\textheight]{Images/uantwerpen-02.jpg}}]{ \gdef\maybeinverse{inverse }% \usebeamercolor[fg]{\maybeinverse normal text}% \setbeamertemplate{background canvas}[graphic]{#1} } \define@key{beamerframe}{lhgraphic} [{\includegraphics[scale=0.1,min width=0.5\paperwidth,min height=\textheight]{Images/uantwerpen-03.jpg}}]{ \gdef\maybeinverse{}% \setbeamertemplate{background canvas}[lhgraphic]{#1} \@rhtexttrue } \define@key{beamerframe}{lqgraphic} [{\includegraphics[scale=0.1,min width=0.5\paperwidth,min height=\textheight]{Images/uantwerpen-04.jpg}}]{ \gdef\maybeinverse{}% \setbeamertemplate{background canvas}[lqgraphic]{#1} \@rqtexttrue } \define@key{beamerframe}{rhgraphic} [{\includegraphics[scale=0.1,min width=0.5\paperwidth,min height=\textheight]{Images/uantwerpen-05.jpg}}]{ \gdef\maybeinverse{}% \setbeamertemplate{background canvas}[rhgraphic]{#1} \@lhtexttrue } \define@key{beamerframe}{rqgraphic} [{\includegraphics[scale=0.5,min width=0.5\paperwidth,min height=\textheight]{Images/uantwerpen-05.jpg}}]{ \gdef\maybeinverse{}% \setbeamertemplate{background canvas}[rqgraphic]{#1} \@lqtexttrue } \define@key{beamerframe}{thgraphic} [{\includegraphics[scale=0.5,min width=\paperwidth,min height=0.5\textheight]{Images/uantwerpen-06.jpg}}]{ \gdef\maybeinverse{}% \setbeamertemplate{background canvas}[thgraphic]{#1} \@bhtexttrue } \define@key{beamerframe}{bhgraphic} [{\includegraphics[scale=0.5,min width=\paperwidth,min height=0.5\textheight]{Images/uantwerpen-07.jpg}}]{ \gdef\maybeinverse{}% \setbeamertemplate{background canvas}[bhgraphic]{#1} } \BeforeBeginEnvironment{frame}{% \gdef\maybeinverse{}% \setbeamertemplate{title page}[main]% \setbeamertemplate{section page}[main]% \setbeamertemplate{subsection page}[main]% \setbeamertemplate{background canvas}[normal]% \usebeamercolor[fg]{normal text}% } % The following does not work as \end{frame} is never executed by % beamer! % \AtEndEnvironment{frame}{\gdef\maybeinverse{}} \NewEnviron{rhframe}[3][]{% \begin{frame}[#1]{#2}{#3} \begin{minipage}[t]{0.525\textwidth} ~ \end{minipage} \begin{minipage}[t]{0.465\textwidth} \BODY \end{minipage} \end{frame} } \NewEnviron{r3qframe}[3][]{% \begin{frame}[#1]{#2}{#3} \begin{minipage}[t]{0.23\textwidth} ~ \end{minipage} \begin{minipage}[t]{0.76\textwidth} \BODY \end{minipage} \end{frame} } \NewEnviron{lhframe}[3][]{% \begin{frame}[#1]{#2}{#3} \begin{minipage}[t]{0.465\textwidth} \BODY \end{minipage} \begin{minipage}[t]{0.525\textwidth} ~ \end{minipage} \end{frame} } \NewEnviron{l3qframe}[3][]{% \begin{frame}[#1]{#2}{#3} \begin{minipage}[t]{0.77\textwidth} \BODY \end{minipage} \begin{minipage}[t]{0.22\textwidth} ~ \end{minipage} \end{frame} } \NewEnviron{bhframe}[3][]{% \begin{frame}[#1]{#2}{#3} \BODY \end{frame} } \NewEnviron{thframe}[3][]{% \begin{frame}[#1]{#2}{#3} \BODY \end{frame} } %%%%%%%%%%%% % Order: % 1. option is executed % 2. frametitle is typeset % 3. canvas is typeset % 4. frame is typeset %%%%%%%%%%%% \def\ps@uantwerpen@titlepage{% \setbeamercolor{title in title page}{parent=palette primary} \setbeamertemplate{footline}[empty] \@nameuse{ps@uantwerpen} } \defbeamertemplate*{background canvas}{negativefill}[1] {% \gdef\appropriatelogo{\logomonowhite}% \gdef\appropriateslidenumber{\usebeamercolor{pageno in head/foot}% \insertframenumber/\inserttotalframenumber}% \color{maincolor}\vrule width\paperwidth height\paperheight } \defbeamertemplate*{background canvas}{negative}[1] {% \gdef\appropriatelogo{\logopos}% \gdef\appropriateslidenumber{}% \begin{tikzpicture} \clip (0,0) rectangle (\pw,\ph); \uantwerpenleftshape[fill=maincolor]{(0.8,0.8)}{(\pw-0.8,\ph-0.8)} \end{tikzpicture} } \defbeamertemplate*{background canvas}{graphicfill}[1] {% \gdef\appropriatelogo{\logoneg}% \gdef\appropriateslidenumber{}% \begin{tikzpicture} \clip (0,0) rectangle (\pw,\ph); \node[align=center] at (0.5*\pw,0.5*\ph) {#1}; \end{tikzpicture}% } \defbeamertemplate*{background canvas}{graphic}[1] {% \gdef\appropriatelogo{\logopos}% \gdef\appropriateslidenumber{}% \begin{tikzpicture} \clip (0,0) rectangle (\pw,\ph); \begin{scope} \uantwerpenleftshape[clip]{(0.8,0.8)}{(\pw-0.8,\ph-0.8)} \node[align=center] at (0.5*\pw,0.5*\ph) {#1}; \end{scope} \end{tikzpicture}% } \defbeamertemplate*{background canvas}{lhgraphic}[1] {% \gdef\maybeinverse{}% \gdef\appropriatelogo{\logopos}% \gdef\appropriateslidenumber{\usebeamercolor{pageno in head/foot}% \insertframenumber/\inserttotalframenumber}% \pgfmathsetmacro\dx{0.5*\pw-1.2}% \pgfmathsetmacro\dy{\ph-1.6}% \begin{tikzpicture} \clip (0,0) rectangle (\pw,\ph); \begin{scope} \uantwerpenleftshape[clip]{(0.8,0.8)}{(0.8+\dx,0.8+\dy)} \node[align=center] at (0.8+0.5*\dx,0.8+0.5*\dy) {#1}; \end{scope} \end{tikzpicture} \@tempswatrue } \defbeamertemplate*{background canvas}{lqgraphic}[1] {% \gdef\maybeinverse{}% \gdef\appropriatelogo{\logopos}% \gdef\appropriateslidenumber{\usebeamercolor{pageno in head/foot}% \insertframenumber/\inserttotalframenumber}% \pgfmathsetmacro\dx{0.25*\pw-1.2}% \pgfmathsetmacro\dy{\ph-1.6}% \begin{tikzpicture} \clip (0,0) rectangle (\pw,\ph); \begin{scope} \uantwerpenleftshape[clip]{(0.8,0.8)}{(0.8+\dx,0.8+\dy)} \node[align=center] at (0.8+0.5*\dx,0.8+0.5*\dy) {#1}; \end{scope} \end{tikzpicture} \@tempswatrue } \defbeamertemplate*{background canvas}{rhgraphic}[1] {% \gdef\maybeinverse{}% \gdef\appropriatelogo{\logopos}% \gdef\appropriateslidenumber{\usebeamercolor{pageno in head/foot}% \insertframenumber/\inserttotalframenumber}% \pgfmathsetmacro\dx{0.5*\pw-1.2}% \pgfmathsetmacro\dy{\ph-1.6}% \begin{tikzpicture} \clip (0,0) rectangle (\pw,\ph); \begin{scope}[shift={(0.5*\pw,0)}] \uantwerpenrightshape[clip]{(0.4,0.8)}{(0.4+\dx,0.8+\dy)} \node[align=center] at (0.8+0.5*\dx,0.8+0.5*\dy) {#1}; \end{scope} \end{tikzpicture} \@tempswatrue } \defbeamertemplate*{background canvas}{rqgraphic}[1] {% \gdef\maybeinverse{}% \gdef\appropriatelogo{\logopos}% \gdef\appropriateslidenumber{\usebeamercolor{pageno in head/foot}% \insertframenumber/\inserttotalframenumber}% \pgfmathsetmacro\dx{0.25*\pw-1.2}% \pgfmathsetmacro\dy{\ph-1.6}% \begin{tikzpicture} \clip (0,0) rectangle (\pw,\ph); \begin{scope}[shift={(0.75*\pw,0)}] \uantwerpenrightshape[clip]{(0.4,0.8)}{(0.4+\dx,0.8+\dy)} \node[align=center] at (0.8+0.5*\dx,0.8+0.5*\dy) {#1}; \end{scope} \end{tikzpicture} \@tempswatrue } \defbeamertemplate*{background canvas}{thgraphic}[1] {% \gdef\maybeinverse{}% \gdef\appropriatelogo{\logopos}% \gdef\appropriateslidenumber{\usebeamercolor{pageno in head/foot}% \insertframenumber/\inserttotalframenumber}% \pgfmathsetmacro\dx{\pw-1.6}% \pgfmathsetmacro\dy{0.5*\ph-0.8}% \begin{tikzpicture} \clip (0,0) rectangle (\pw,\ph); \begin{scope}[shift={(0,0.5*\ph)}] \uantwerpenleftshape[clip] {(0.8,0)}{(0.8+\dx,\dy)} \node[align=center] at (0.8+0.5*\dx,0.5*\dy) {#1}; \end{scope} \end{tikzpicture} \@tempswatrue } \defbeamertemplate*{background canvas}{bhgraphic}[1] {% \gdef\maybeinverse{}% \gdef\appropriatelogo{\logopos}% \gdef\appropriateslidenumber{\usebeamercolor{pageno in head/foot}% \insertframenumber/\inserttotalframenumber}% \pgfmathsetmacro\dx{\pw-1.6}% \pgfmathsetmacro\dy{0.5*\ph-0.8}% \begin{tikzpicture} \clip (0,0) rectangle (\pw,\ph); \begin{scope}[shift={(0,0.8)}] \uantwerpenleftshape[clip] {(0.8,0)}{(0.8+\dx,\dy)} \node[align=center] at (0.8+0.5*\dx,0.5*\dy) {#1}; \end{scope} \end{tikzpicture} \@tempswatrue } \defbeamertemplate*{background canvas}{normal} {% \gdef\maybeinverse{}% \gdef\appropriatelogo{\logopos}% \gdef\appropriateslidenumber{\usebeamercolor{pageno in head/foot}\insertframenumber/\inserttotalframenumber}% } \defbeamertemplate*{title page}{main}[1][] {% \thispagestyle{uantwerpen@titlepage}% \begin{tikzpicture} \clip (0,0) rectangle (\textwidth,\paperheight-0.075cm); \node[anchor=center] at (0.5*\textwidth,0.75*\ph) {\includegraphics[height=.9\logounitheight]{\logopos}}; \node[ text width=0.98\textwidth, text=basecolor, align=center] at (0.5*\textwidth,0.5*\ph) { \begin{beamercolorbox}[wd=\textwidth,center]{title in title page} \LARGE\bfseries\inserttitle\\[1ex] \usebeamercolor[fg]{subtitle in title page} \color{fg}\large\bfseries\insertsubtitle \end{beamercolorbox} }; \node[ text width=0.98\textwidth, color=basecolor, align=center] at (0.5*\textwidth,0.25*\ph) { \begin{beamercolorbox}[wd=\textwidth,center]{author in title page} \large\bfseries\insertauthor \end{beamercolorbox} }; \node[ text width=0.98\textwidth, color=basecolor, align=center] at (0.5*\textwidth,0.15*\ph) { \begin{beamercolorbox}[wd=\textwidth,center]{date in title page} \normalsize\bfseries\insertdate \end{beamercolorbox} }; \end{tikzpicture} } \defbeamertemplate*{title page}{negative}[1][] { \begin{tikzpicture} \clip (0,0) rectangle (\textwidth,\paperheight-0.075cm); \node[ text width=0.98\textwidth, align=center] at (0.5*\textwidth,0.5*\ph) { \begin{beamercolorbox}[wd=\textwidth,center]{inverse title in title page} \LARGE\bfseries\inserttitle\\[1ex] \usebeamercolor[fg]{\maybeinverse subtitle in title page} \color{fg}\large\bfseries\insertsubtitle \end{beamercolorbox} }; \node[ text width=0.98\textwidth, align=center,] at (0.5*\textwidth,0.25*\ph) { \begin{beamercolorbox}[wd=\textwidth,center]{inverse author in title page} \large\bfseries\insertauthor \end{beamercolorbox} }; \node[ text width=0.98\textwidth, color=basecolor, align=center] at (0.5*\textwidth,0.15*\ph) { \begin{beamercolorbox}[wd=\textwidth,center]{inverse date in title page} \normalsize\bfseries\insertdate \end{beamercolorbox} }; \end{tikzpicture} } \defbeamertemplate*{title page}{negativefill}[1][] { \thispagestyle{uantwerpen@titlepage} \begin{tikzpicture} \clip (0,0) rectangle (\textwidth,\paperheight-0.075cm); \node[anchor=center] at (0.5*\textwidth,0.75*\ph) {\includegraphics[height=.9\logounitheight]{\logomonowhite}}; \node[ draw,rectangle, text width=0.98\textwidth, color=maincolor, align=center] at (0.5*\textwidth,0.5*\ph) { \begin{beamercolorbox}[wd=\textwidth,center]{inverse title in title page} \LARGE\bfseries\inserttitle\\[1ex] \usebeamercolor[fg]{inverse subtitle in title page} \color{fg}\large\bfseries\insertsubtitle \end{beamercolorbox} }; \node[ text width=0.98\textwidth, color=maincolor, align=center] at (0.5*\textwidth,0.25*\ph) { \begin{beamercolorbox}[wd=\textwidth,center]{inverse author in title page} \large\bfseries\insertauthor \end{beamercolorbox} }; \node[ text width=0.98\textwidth, color=basecolor, align=center] at (0.5*\textwidth,0.15*\ph) { \begin{beamercolorbox}[wd=\textwidth,center]{inverse date in title page} \normalsize\bfseries\insertdate \end{beamercolorbox} }; \end{tikzpicture} } \defbeamertemplate*{section page}{main}[1][] {% \begin{tikzpicture} \clip (0,0) rectangle (\textwidth,\paperheight-0.075cm); \node[ text width=0.98\textwidth, text=basecolor, align=center] at (0.5*\textwidth,0.55*\ph) { \begin{beamercolorbox}[wd=\textwidth,center]{section title} \Large\bfseries\insertsectionnumber.~\insertsection \end{beamercolorbox} }; \end{tikzpicture} } \defbeamertemplate*{subsection page}{main}[1][] {% \begin{tikzpicture} \clip (0,0) rectangle (\textwidth,\paperheight-0.075cm); \node[ text width=0.98\textwidth, text=basecolor, align=center] at (0.5*\textwidth,0.55*\ph) { \begin{beamercolorbox}[wd=\textwidth,center]{section title} \Large\bfseries\insertsectionnumber.~\insertsection \end{beamercolorbox} }; \node[ text width=0.98\textwidth, text=basecolor, align=center] at (0.5*\textwidth,0.45*\ph) { \begin{beamercolorbox}[wd=\textwidth,center]{subsection title} \large\bfseries\insertsubsection \end{beamercolorbox} }; \end{tikzpicture} } \defbeamertemplate*{section page}{negative}[1][] { \begin{tikzpicture} \clip (0,0) rectangle (\textwidth,\paperheight-0.075cm); \node[ text width=0.98\textwidth, text=basecolor, align=center] at (0.5*\textwidth,0.55*\ph) { \begin{beamercolorbox}[wd=\textwidth,center]{inverse section title} \Large\bfseries\insertsectionnumber.~\insertsection \end{beamercolorbox} }; \end{tikzpicture} } \defbeamertemplate*{subsection page}{negative}[1][] { \begin{tikzpicture} \clip (0,0) rectangle (\textwidth,\paperheight-0.075cm); \node[ text width=0.98\textwidth, text=basecolor, align=center] at (0.5*\textwidth,0.55*\ph) { \begin{beamercolorbox}[wd=\textwidth,center]{inverse section title} \Large\bfseries\insertsectionnumber.~\insertsection \end{beamercolorbox} }; \node[ text width=0.98\textwidth, text=basecolor, align=center] at (0.5*\textwidth,0.45*\ph) { \begin{beamercolorbox}[wd=\textwidth,center]{inverse subsection title} \large\bfseries\insertsubsection \end{beamercolorbox} }; \end{tikzpicture} } \defbeamertemplate*{footline}{empty} { } \defbeamertemplate*{footline}{normal} {% \leavevmode% \hbox{\begin{beamercolorbox} [wd=.5\paperwidth,ht=0.55cm,dp=0.25cm,left,leftskip=.8cm plus1fill]{author in head/foot}% \includegraphics[height=0.35\logounitheight]{\appropriatelogo} \hskip0pt plus 1filll ~ \end{beamercolorbox}% \begin{beamercolorbox}[wd=.5\paperwidth,ht=0.55cm,dp=0.25cm, right,rightskip=.8cm plus1fill]{\maybeinverse pageno in head/foot}% \usebeamerfont{pageno in head/foot}~\hskip0pt plus 1filll \appropriateslidenumber \end{beamercolorbox}}% \vskip0pt% } \defbeamertemplate*{frametitle}{empty} { } \defbeamertemplate*{frametitle}{normal} {% \vskip0.75cm% \if@rhtext% \@tempdima=0.5\textwidth% \@tempdimb=0.5\textwidth% \advance\@tempdima by0.5\beamer@leftmargin% \advance\@tempdimb by-0.5\beamer@leftmargin% \else% \if@rqtext% \@tempdima=0.23\textwidth% \@tempdimb=0.77\textwidth% \else% \if@lhtext% \@tempdima=0em% \@tempdimb=0.5\textwidth% \advance\@tempdimb by-0.5\beamer@leftmargin% \else% \if@lqtext% \@tempdima=0em% \@tempdimb=0.77\textwidth% \else% \if@bhtext% \@tempdima=0em% \@tempdimb=\textwidth% \vskip0.5\textheight% \else% \@tempdima=0em% \@tempdimb=\textwidth% \fi% \fi% \fi% \fi% \fi% \hskip\@tempdima% \begin{beamercolorbox}[wd=\@tempdimb]{\maybeinverse frametitle}% \usebeamerfont{frametitle}\insertframetitle\\[0.5ex]% \ifx\insertframesubtitle\@empty% {\usebeamerfont{framesubtitle}% \usebeamercolor[fg]{\maybeinverse framesubtitle}~\strut\par}% \vskip-1ex% \else% {\usebeamerfont{framesubtitle}% \usebeamercolor[fg]{\maybeinverse framesubtitle}% \insertframesubtitle\strut\par}% \fi% \if@tempswa\else\vskip-.3cm\fi% set inside beamercolorbox... evil here... \end{beamercolorbox}% } \newdimen\xloleft \newdimen\yloleft \newdimen\xupright \newdimen\yupright \newdimen\xcurrent \newdimen\ycurrent \newcommand*\extractloleft[1]{\path (#1);\pgfgetlastxy{\xloleft}{\yloleft};} \newcommand*\extractupright[1]{\path (#1);\pgfgetlastxy{\xupright}{\yupright};} \newcommand*\extractcurrent[1]{\path (#1);\pgfgetlastxy{\xcurrent}{\ycurrent};} \DeclareRobustCommand\place{\@ifnextchar[{\@place}{\@place[align=left] }} \def\@place[#1] at (#2,#3)#4{ \begin{tikzpicture}[overlay,remember picture] \extractloleft{$(current page.south west)$} \extractupright{$(current page.north east)$} \node[#1] at ({\xloleft*(1-#2)+\xupright*#2},{\yloleft*(1-#3)+\yupright*#3}) {#4}; \end{tikzpicture} } \mode % % \end{macrocode} % % \Finale \endinput