% \iffalse meta-comment % % This program can be distributed and/or modified under the terms % of the LaTeX Project Public License either version 1.3c of this % license or (at your option) any later version. % The latest version of this license is in % http://www.latex-project.org/lppl.txt % and version 1.3c or later is part of all distributions of LaTeX % version 2005/12/01 or later. % % This file has the LPPL maintenance status "maintained". % % \fi % % \iffalse %<*opt> % \fi % \begin{macrocode} %% This is an example of config file *for syntax only*. %% %% Copy it to your document's directory and add %% \renewcommand{\DefaultOptionsFile}{optfile.cfl} %% to your document's preamble to use it. %% %% The settings below are just *examples*, they are not meant to be good! %% Proper values heavily depend on the font used! %% %% Letters not listed below, will get either the default parameters, %% or those given as optional argument of \lettrine, if any. %% %% The values of the parameters set in this file can be overridden locally %% using the optional argument of \lettrine. %% %% A \LettrineOptionsFor{A}{slope=0.1\LettrineWidth, findent=-.5em, nindent=.7em} %% Same parameters for À (utf-8) \LettrineOptionsFor{À}{slope=0.1\LettrineWidth, findent=-.5em, nindent=0.7em} %% C' \LettrineOptionsFor{C'}{nindent=-0.5em} %% I and J hang into the margin \LettrineOptionsFor{I}{lhang=1, nindent=0pt} \LettrineOptionsFor{J}{lhang=1, nindent=0pt} %% Q \LettrineOptionsFor{Q}{loversize=-0.1, lraise=0.1} %% V \LettrineOptionsFor{V}{slope=-0.1\LettrineWidth, lhang=0.5, nindent=0pt} % \end{macrocode} % \iffalse % % \fi % % \iffalse %<*pzc2> % \fi % \begin{macrocode} %%% This is file `pzc2.cfl'. %%% It is provided under the LPPL. Copyright is held by Kevin M. Dunn. %%% If you modify this file you *MUST* change its name. %%% This file contains config values to simplify the use of the %%% Zapf-Chancery (aka pzc) font with the lettrine package by Daniel Flipo. %%% This file provides the parameters for 2 DefaultLines. %%% If you want to use this file, your document should contain %%% the next three lines, without the leading percent signs. %%% \setcounter{DefaultLines}{2} %%% \renewcommand\LettrineFontHook{\fontencoding{T1}\fontfamily{pzc}\selectfont} %%% \renewcommand{\DefaultOptionsFile}{pzc2.cfl} %%% Comments about this file can be sent to Kevin Dunn %%% (cavema2 at cavemanchemistry.com) \ProvidesFile{pzc2.cfl}[2006/03/19 v0.1 Kevin M. Dunn] \LettrineOptionsFor{A}{loversize= 0.35,lraise= 0.00,lhang= 0.35,findent= 0.05\LettrineWidth,nindent= 0.25\LettrineWidth} \LettrineOptionsFor{B}{loversize= 0.35,lraise= 0.00,lhang= 0.35,findent= 0.10\LettrineWidth,nindent= 0.08\LettrineWidth} \LettrineOptionsFor{C}{loversize= 0.35,lraise= 0.10,lhang= 0.35,findent= 0.00\LettrineWidth,nindent= 0.28\LettrineWidth} \LettrineOptionsFor{D}{loversize= 0.35,lraise= 0.00,lhang= 0.35,findent= 0.15\LettrineWidth,nindent= 0.05\LettrineWidth} \LettrineOptionsFor{E}{loversize= 0.35,lraise= 0.00,lhang= 0.35,findent= 0.00\LettrineWidth,nindent= 0.28\LettrineWidth} \LettrineOptionsFor{F}{loversize= 0.35,lraise= 0.00,lhang= 0.35,findent= 0.10\LettrineWidth,nindent= 0.00\LettrineWidth} \LettrineOptionsFor{G}{loversize= 0.35,lraise= 0.10,lhang= 0.35,findent= 0.10\LettrineWidth,nindent= 0.17\LettrineWidth} \LettrineOptionsFor{H}{loversize= 0.35,lraise= 0.00,lhang= 0.35,findent= 0.10\LettrineWidth,nindent= 0.20\LettrineWidth} \LettrineOptionsFor{I}{loversize= 0.35,lraise= 0.00,lhang= 0.35,findent= 0.05\LettrineWidth,nindent= 0.25\LettrineWidth} \LettrineOptionsFor{J}{loversize= 0.35,lraise= 0.00,lhang= 0.35,findent= 0.15\LettrineWidth,nindent= 0.00\LettrineWidth} \LettrineOptionsFor{K}{loversize= 0.35,lraise= 0.00,lhang= 0.35,findent= 0.05\LettrineWidth,nindent= 0.13\LettrineWidth} \LettrineOptionsFor{L}{loversize= 0.35,lraise= 0.00,lhang= 0.35,findent=-0.02\LettrineWidth,nindent= 0.30\LettrineWidth} \LettrineOptionsFor{M}{loversize= 0.35,lraise= 0.00,lhang= 0.35,findent= 0.05\LettrineWidth,nindent= 0.15\LettrineWidth} \LettrineOptionsFor{N}{loversize= 0.35,lraise= 0.00,lhang= 0.35,findent= 0.10\LettrineWidth,nindent= 0.10\LettrineWidth} \LettrineOptionsFor{O}{loversize= 0.35,lraise= 0.00,lhang= 0.35,findent= 0.15\LettrineWidth,nindent= 0.08\LettrineWidth} \LettrineOptionsFor{P}{loversize= 0.35,lraise= 0.00,lhang= 0.35,findent= 0.25\LettrineWidth,nindent= 0.05\LettrineWidth} \LettrineOptionsFor{Q}{loversize= 0.35,lraise= 0.00,lhang= 0.35,findent= 0.15\LettrineWidth,nindent= 0.10\LettrineWidth} \LettrineOptionsFor{R}{loversize= 0.35,lraise= 0.00,lhang= 0.35,findent= 0.08\LettrineWidth,nindent= 0.15\LettrineWidth} \LettrineOptionsFor{S}{loversize= 0.35,lraise= 0.00,lhang= 0.35,findent= 0.10\LettrineWidth,nindent= 0.13\LettrineWidth} \LettrineOptionsFor{T}{loversize= 0.35,lraise= 0.00,lhang= 0.35,findent= 0.05\LettrineWidth,nindent= 0.20\LettrineWidth} \LettrineOptionsFor{U}{loversize= 0.35,lraise= 0.00,lhang= 0.35,findent= 0.05\LettrineWidth,nindent= 0.15\LettrineWidth} \LettrineOptionsFor{V}{loversize= 0.35,lraise= 0.00,lhang= 0.35,findent= 0.18\LettrineWidth,nindent=-0.15\LettrineWidth} \LettrineOptionsFor{W}{loversize= 0.35,lraise= 0.00,lhang= 0.35,findent= 0.15\LettrineWidth,nindent=-0.05\LettrineWidth} \LettrineOptionsFor{X}{loversize= 0.35,lraise= 0.00,lhang= 0.35,findent= 0.00\LettrineWidth,nindent= 0.35\LettrineWidth} \LettrineOptionsFor{Y}{loversize= 0.35,lraise= 0.00,lhang= 0.35,findent= 0.10\LettrineWidth,nindent= 0.05\LettrineWidth} \LettrineOptionsFor{Z}{loversize= 0.35,lraise= 0.00,lhang= 0.35,findent= 0.00\LettrineWidth,nindent= 0.30\LettrineWidth} % \end{macrocode} % \iffalse % % \fi % % \iffalse %<*pzc3> % \fi % \begin{macrocode} %%% This is file `pzc3.cfl'. %%% It is provided under the LPPL. Copyright is held by Kevin M. Dunn. %%% If you modify this file you *MUST* change its name. %%% This file contains config values to simplify the use of the %%% Zapf-Chancery (aka pzc) font with the lettrine package by Daniel Flipo. %%% This file provides the parameters for 3 DefaultLines. %%% If you want to use this file, your document should contain %%% the next three lines, without the leading percent signs. %%% \setcounter{DefaultLines}{3} %%% \renewcommand\LettrineFontHook{\fontencoding{T1}\fontfamily{pzc}\selectfont} %%% \renewcommand{\DefaultOptionsFile}{pzc3.cfl} %%% Comments about this file can be sent to Kevin Dunn %%% (cavema2 at cavemanchemistry.com) \ProvidesFile{pzc3.cfl}[2006/03/19 v0.1 Kevin M. Dunn] \LettrineOptionsFor{A}{loversize= 0.35,lraise= 0.00,lhang= 0.35,findent=0.05\LettrineWidth,nindent= 0.25\LettrineWidth} \LettrineOptionsFor{B}{loversize= 0.35,lraise= 0.00,lhang= 0.35,findent=0.10\LettrineWidth,nindent= 0.08\LettrineWidth,slope=-0.08\LettrineWidth} \LettrineOptionsFor{C}{loversize= 0.35,lraise= 0.10,lhang= 0.35,findent=0.00\LettrineWidth,nindent= 0.28\LettrineWidth} \LettrineOptionsFor{D}{loversize= 0.35,lraise= 0.00,lhang= 0.35,findent=0.15\LettrineWidth,nindent= 0.05\LettrineWidth,slope=-0.05\LettrineWidth} \LettrineOptionsFor{E}{loversize= 0.35,lraise= 0.00,lhang= 0.35,findent=0.00\LettrineWidth,nindent= 0.28\LettrineWidth} \LettrineOptionsFor{F}{loversize= 0.35,lraise= 0.05,lhang= 0.35,findent=0.10\LettrineWidth,nindent= 0.00\LettrineWidth} \LettrineOptionsFor{G}{loversize= 0.30,lraise= 0.30,lhang= 0.5,findent=0.10\LettrineWidth,nindent= 0.15\LettrineWidth} \LettrineOptionsFor{H}{loversize= 0.35,lraise= 0.00,lhang= 0.35,findent=0.10\LettrineWidth,nindent= 0.20\LettrineWidth} \LettrineOptionsFor{I}{loversize= 0.35,lraise= 0.00,lhang= 0.35,findent=0.05\LettrineWidth,nindent= 0.25\LettrineWidth} \LettrineOptionsFor{J}{loversize= 0.35,lraise= 0.05,lhang= 0.35,findent=0.15\LettrineWidth,nindent= 0.00\LettrineWidth} \LettrineOptionsFor{K}{loversize= 0.30,lraise= 0.20,lhang= 0.35,findent=0.05\LettrineWidth,nindent= 0.13\LettrineWidth,slope= 0.20\LettrineWidth} \LettrineOptionsFor{L}{loversize= 0.35,lraise= 0.00,lhang=0.35,findent=-0.02\LettrineWidth,nindent= 0.30\LettrineWidth} \LettrineOptionsFor{M}{loversize= 0.35,lraise= 0.00,lhang= 0.35,findent=0.05\LettrineWidth,nindent= 0.15\LettrineWidth} \LettrineOptionsFor{N}{loversize= 0.30,lraise= 0.20,lhang= 0.35,findent=0.10\LettrineWidth,nindent= 0.10\LettrineWidth,slope= 0.20\LettrineWidth} \LettrineOptionsFor{O}{loversize= 0.35,lraise= 0.00,lhang= 0.35,findent=0.15\LettrineWidth,nindent= 0.08\LettrineWidth} \LettrineOptionsFor{P}{loversize= 0.35,lraise= 0.00,lhang= 0.35,findent=0.25\LettrineWidth,nindent= 0.05\LettrineWidth} \LettrineOptionsFor{Q}{loversize= 0.30,lraise= 0.25,lhang= 0.35,findent=0.15\LettrineWidth,nindent= 0.10\LettrineWidth,slope= 0.20\LettrineWidth} \LettrineOptionsFor{R}{loversize= 0.30,lraise= 0.20,lhang= 0.35,findent=0.08\LettrineWidth,nindent= 0.15\LettrineWidth,slope= 0.20\LettrineWidth} \LettrineOptionsFor{S}{loversize= 0.35,lraise= 0.00,lhang= 0.35,findent=0.10\LettrineWidth,nindent= 0.13\LettrineWidth} \LettrineOptionsFor{T}{loversize= 0.35,lraise= 0.00,lhang= 0.35,findent=0.05\LettrineWidth,nindent= 0.20\LettrineWidth} \LettrineOptionsFor{U}{loversize= 0.35,lraise= 0.00,lhang= 0.35,findent=0.05\LettrineWidth,nindent= 0.15\LettrineWidth} \LettrineOptionsFor{V}{loversize= 0.35,lraise= 0.00,lhang= 0.35,findent=0.18\LettrineWidth,nindent=-0.05\LettrineWidth,slope=-0.15\LettrineWidth} \LettrineOptionsFor{W}{loversize= 0.35,lraise= 0.00,lhang= 0.35,findent=0.18\LettrineWidth,nindent=-0.05\LettrineWidth,slope=-0.10\LettrineWidth} \LettrineOptionsFor{X}{loversize= 0.35,lraise= 0.00,lhang= 0.35,findent=0.00\LettrineWidth,nindent= 0.35\LettrineWidth} \LettrineOptionsFor{Y}{loversize= 0.30,lraise= 0.10,lhang= 0.40,findent=0.10\LettrineWidth,nindent= 0.00\LettrineWidth,slope=-0.10\LettrineWidth} \LettrineOptionsFor{Z}{loversize= 0.35,lraise= 0.00,lhang= 0.35,findent=0.00\LettrineWidth,nindent= 0.30\LettrineWidth} % \end{macrocode} % \iffalse % % \fi % % \iffalse %<*pacl> % \fi % \begin{macrocode} %%% This is file `pacl.cfl'. %%% It is provided under the LPPL. Copyright is hold by Pascal Kockaert. %%% If you modify this file you *MUST* change its name. %%% This file contains config values to simplify the use of the %%% ACaslon-SwashItalic (aka pacri8s) font from Adobe %%% with the lettrine package by Daniel Flipo. %%% If you want to use this file, your document should contain %%% the two next lines, without the leading percent signs. %%% \renewcommand\LettrineFontHook{\fontencoding{T1}\fontfamily{pacl}\selectfont} %%% \renewcommand{\DefaultOptionsFile}{pacl.cfl} %%% The fontfamily pacl is defined through the file T1pacl.fd. %%% The contents of T1pacl.fd is listed at the end of this file. %%% The settings below were defined according to my visual tastes. %%% No mathematical rule based on the metrices was applied. %%% Though the result may not please you, it should be better %%% than the default placement. This said, comments are welcome. %%% Comments about this file can be sent to Pascal.Kockaert %%% at the mail server ulb.ac.be. \ProvidesFile{pacl.cfl}[2003/08/24 v0.1 Pascal Kockaert] \LettrineOptionsFor{A}{loversize= 0.15,lraise= 0.02,lhang= 0.30,findent= 0.00\LettrineWidth,nindent= 0.50em} \LettrineOptionsFor{B}{loversize= 0.15,lraise= 0.00,lhang= 0.25,findent=-0.05\LettrineWidth,nindent= 0.50em} \LettrineOptionsFor{C}{loversize=-0.10,lraise= 0.25,lhang= 0.05,findent= 0.00\LettrineWidth,nindent= 0.50em} \LettrineOptionsFor{D}{loversize= 0.15,lraise= 0.00,lhang= 0.20,findent=-0.07\LettrineWidth,nindent= 0.50em} \LettrineOptionsFor{E}{loversize= 0.15,lraise= 0.00,lhang= 0.05,findent=-0.10\LettrineWidth,nindent= 0.50em} \LettrineOptionsFor{F}{loversize=-0.10,lraise= 0.20,lhang= 0.00,findent= 0.05\LettrineWidth,nindent= 0.50em} \LettrineOptionsFor{G}{loversize=-0.10,lraise= 0.20,lhang= 0.05,findent=-0.05\LettrineWidth,nindent= 0.50em} \LettrineOptionsFor{H}{loversize= 0.05,lraise= 0.00,lhang= 0.25,findent= 0.00\LettrineWidth,nindent= 0.50em} \LettrineOptionsFor{I}{loversize= 0.15,lraise= 0.00,lhang= 0.00,findent= 0.00\LettrineWidth,nindent= 0.50em} \LettrineOptionsFor{J}{loversize=-0.10,lraise= 0.20,lhang= 0.00,findent= 0.00\LettrineWidth,nindent= 0.50em} \LettrineOptionsFor{K}{loversize=-0.10,lraise= 0.25,lhang= 0.00,findent= 0.00\LettrineWidth,nindent= 0.45\LettrineWidth} \LettrineOptionsFor{L}{loversize= 0.00,lraise= 0.20,lhang= 0.00,findent=-0.10\LettrineWidth,nindent= 0.40\LettrineWidth} \LettrineOptionsFor{M}{loversize= 0.15,lraise= 0.00,lhang= 0.24,findent=-0.05\LettrineWidth,nindent= 0.10\LettrineWidth} \LettrineOptionsFor{N}{loversize=-0.05,lraise= 0.25,lhang= 0.13,findent= 0.05\LettrineWidth,nindent= 0.35\LettrineWidth} \LettrineOptionsFor{O}{loversize= 0.15,lraise= 0.00,lhang= 0.05,findent=-0.12\LettrineWidth,nindent= 0.15\LettrineWidth} \LettrineOptionsFor{P}{loversize= 0.15,lraise= 0.00,lhang= 0.25,findent= 0.00\LettrineWidth,nindent= 0.50em} \LettrineOptionsFor{Q}{loversize=-0.15,lraise= 0.25,lhang= 0.10,findent=-0.05\LettrineWidth,nindent= 0.55\LettrineWidth} \LettrineOptionsFor{R}{loversize=-0.15,lraise= 0.25,lhang= 0.20,findent=-0.05\LettrineWidth,nindent= 0.45\LettrineWidth} \LettrineOptionsFor{S}{loversize=-0.10,lraise= 0.25,lhang=-0.05,findent=-0.05\LettrineWidth,nindent= 0.50em} \LettrineOptionsFor{T}{loversize= 0.15,lraise= 0.00,lhang= 0.15,findent= 0.00\LettrineWidth,nindent= 0.15\LettrineWidth} \LettrineOptionsFor{U}{loversize= 0.15,lraise= 0.00,lhang= 0.05,findent= 0.00\LettrineWidth,nindent= 0.50em} \LettrineOptionsFor{V}{loversize= 0.15,lraise= 0.00,lhang= 0.20,findent=-0.05\LettrineWidth,nindent= 0.50em} \LettrineOptionsFor{W}{loversize= 0.15,lraise= 0.00,lhang= 0.15,findent=-0.05\LettrineWidth,nindent= 0.50em} \LettrineOptionsFor{X}{loversize= 0.15,lraise= 0.00,lhang= 0.45,findent= 0.05\LettrineWidth,nindent= 0.15\LettrineWidth} \LettrineOptionsFor{Y}{loversize= 0.15,lraise= 0.00,lhang= 0.05,findent= 0.20\LettrineWidth,nindent= 0.25\LettrineWidth} \LettrineOptionsFor{Z}{loversize= 0.05,lraise= 0.15,lhang= 0.15,findent= 0.00\LettrineWidth,nindent= 0.30\LettrineWidth} \let\EOF\endinput \EOF %% The installation of the pacl family can be performed using the %% fontinst package. %% You must own the font ACaslon-SwashItalic, that is an AFM and a PFB file %% which should be renamed as padri8w.afm and padri8w.pfb. %% You should process the file Makepacl.tex (see below) through TeX, %% and follow the instructions of the fontinst manual to finish the install. %% The file T1pacl.fd should be defined as below and put with other local %% FD files. %%% File Makepacl.tex \input fontinst.sty \installfonts \declareencoding{T1-SWASH}{T1} \fromafm{pacri8s} %%% File containing metrics of ACaslon-SwashItalic \installfont{pacri9s}{pacri8s}{T1}{T1}{pacl}{m}{n}{} \endinstallfonts \bye %%% End of file Makepacl.tex %%% The pacl family is defined by the file T1pacl.fd, as follows %%% File T1pacl.fd %%% THIS FILE SHOULD BE PUT IN A TEX INPUTS DIRECTORY \ProvidesFile{t1pacl.fd}[2003/08/24 v1.0 Pascal Kockaert] \DeclareFontFamily{T1}{pacl}{} \DeclareFontShape{T1}{pacl}{m}{n}{<->pacri9s}{} %%% End of file T1pacl.fd % \end{macrocode} % \iffalse % % \fi % % \iffalse %<*padl> % \fi % \begin{macrocode} %%% This is file `padl.cfl'. %%% It is provided under the LPPL. Copyright is hold by Pascal Kockaert. %%% If you modify this file you *MUST* change its name. %%% This file contains config values to simplify the use of the %%% AGaramondAlt-Italic (aka padri8w) font from Adobe %%% with the lettrine package by Daniel Flipo. %%% If you want to use this file, your document should contain %%% the two next lines, without the leading percent signs. %%% \renewcommand\LettrineFontHook{\fontencoding{T1}\fontfamily{padl}\selectfont} %%% \renewcommand{\DefaultOptionsFile}{padl.cfl} %%% The fontfamily padl is defined through the file T1padl.fd. %%% The contents of T1padl.fd is listed at the end of this file. %%% The settings below were defined according to my visual tastes. %%% No mathematical rule based on the metrices was applied. %%% Though the result may not please you, it should be better %%% than the default placement. This said, comments are welcome. %%% Comments about this file can be sent to Pascal.Kockaert %%% at the mail server ulb.ac.be. \ProvidesFile{padl.cfl}[2003/08/24 v1.0 Pascal Kockaert] \LettrineOptionsFor{A}{loversize= 0.05,lraise= 0.10,lhang= 0.40,findent= 0.000\LettrineWidth,nindent= 0.50em} \LettrineOptionsFor{B}{loversize= 0.10,lraise= 0.00,lhang= 0.30,findent= 0.025\LettrineWidth,nindent= 0.50em} \LettrineOptionsFor{C}{loversize= 0.00,lraise= 0.10,lhang= 0.15,findent= 0.175\LettrineWidth,nindent= 0.50em} \LettrineOptionsFor{D}{loversize= 0.10,lraise= 0.00,lhang= 0.30,findent=-0.025\LettrineWidth,nindent= 0.50em} \LettrineOptionsFor{E}{loversize= 0.10,lraise= 0.00,lhang= 0.10,findent= 0.100\LettrineWidth,nindent= 0.50em} \LettrineOptionsFor{F}{loversize= 0.10,lraise= 0.00,lhang= 0.30,findent= 0.100\LettrineWidth,nindent= 0.50em} \LettrineOptionsFor{G}{loversize=-0.08,lraise= 0.20,lhang= 0.10,findent= 0.000\LettrineWidth,nindent= 0.50em} \LettrineOptionsFor{H}{loversize=-0.01,lraise= 0.00,lhang= 0.00,findent= 0.040\LettrineWidth,nindent= 0.50em} \LettrineOptionsFor{I}{loversize= 0.10,lraise= 0.00,lhang= 0.00,findent= 0.050\LettrineWidth,nindent= 0.50em} \LettrineOptionsFor{J}{loversize=-0.08,lraise= 0.20,lhang= 0.00,findent=-0.025\LettrineWidth,nindent= 0.50em} \LettrineOptionsFor{K}{loversize=-0.05,lraise= 0.25,lhang= 0.00,findent=-0.050\LettrineWidth,nindent= 0.60\LettrineWidth} \LettrineOptionsFor{L}{loversize= 0.00,lraise= 0.20,lhang= 0.00,findent= 0.100\LettrineWidth,nindent= 0.40\LettrineWidth} \LettrineOptionsFor{M}{loversize= 0.10,lraise= 0.00,lhang= 0.40,findent= 0.040\LettrineWidth,nindent= 0.10\LettrineWidth} \LettrineOptionsFor{N}{loversize= 0.00,lraise= 0.20,lhang= 0.20,findent=-0.010\LettrineWidth,nindent= 0.40\LettrineWidth} \LettrineOptionsFor{O}{loversize= 0.10,lraise= 0.00,lhang= 0.20,findent=-0.010\LettrineWidth,nindent= 0.50em} \LettrineOptionsFor{P}{loversize= 0.10,lraise= 0.00,lhang= 0.30,findent= 0.050\LettrineWidth,nindent= 0.50em} \LettrineOptionsFor{Q}{loversize= 0.00,lraise= 0.20,lhang= 0.20,findent= 0.050\LettrineWidth,nindent= 0.70\LettrineWidth} \LettrineOptionsFor{R}{loversize=-0.05,lraise= 0.25,lhang= 0.25,nindent= 0.500\LettrineWidth,nindent= 0.50\LettrineWidth} \LettrineOptionsFor{S}{loversize= 0.10,lraise= 0.05,lhang= 0.00,findent= 0.000\LettrineWidth,nindent= 0.50em} \LettrineOptionsFor{T}{loversize= 0.10,lraise= 0.00,lhang= 0.35,findent= 0.100\LettrineWidth,nindent= 0.50em} \LettrineOptionsFor{U}{loversize= 0.10,lraise= 0.00,lhang= 0.20,findent= 0.050\LettrineWidth,nindent= 0.50em} \LettrineOptionsFor{V}{loversize= 0.10,lraise= 0.00,lhang= 0.40,findent= 0.050\LettrineWidth,nindent= 0.50em} \LettrineOptionsFor{W}{loversize= 0.10,lraise= 0.00,lhang= 0.30,findent= 0.040\LettrineWidth,nindent= 0.50em} \LettrineOptionsFor{X}{loversize= 0.10,lraise= 0.00,lhang= 0.40,findent= 0.040\LettrineWidth,nindent= 0.20\LettrineWidth} \LettrineOptionsFor{Y}{loversize= 0.10,lraise= 0.00,lhang= 0.20,findent= 0.100\LettrineWidth,nindent= 0.20\LettrineWidth} \LettrineOptionsFor{Z}{loversize=-0.05,lraise= 0.25,lhang= 0.00,findent= 0.050\LettrineWidth,nindent= 0.55\LettrineWidth} \let\EOF\endinput \EOF %% The installation of the padl family can be performed using the %% fontinst package. %% You must own the font AGaramondAlt-Italic, that is an AFM and a PFB %% file which should be renamed as padri8w.afm and padri8w.pfb. %% You should process the file Makepadl.tex (see below) through TeX, %% and follow the instructions of the fontinst manual to finish the %% install. %% The file T1padl.fd should be defined as below and put with other %% local FD files. %%% File Makepadl.tex \input fontinst.sty \installfonts \declareencoding{T1-SWASH}{T1} \fromafm{padri8w} %%% File containing metrics of AGaramondAlt-Italic \gdef\uc#1#2{#1swash} \installfont{padw9w}{padri8w}{T1}{T1}{padl}{m}{n}{} \endinstallfonts \bye %%% End of file Makepadl.tex %% The padl family is defined by the file T1padl.fd, as follows %%% File T1padl.fd %%% THIS FILE SHOULD BE PUT IN A TEX INPUTS DIRECTORY \ProvidesFile{t1padl.fd}[2003/08/24 v0.1 Pascal Kockaert] \DeclareFontFamily{T1}{padl}{} \DeclareFontShape{T1}{padl}{m}{n}{<->padw9w}{} %%% End of file T1padl.fd % \end{macrocode} % \iffalse % % \fi % % \iffalse %<*dtx> % \fi %% %% \CharacterTable %% {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z %% Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z %% Digits \0\1\2\3\4\5\6\7\8\9 %% Exclamation \! Double quote \" Hash (number) \# %% Dollar \$ Percent \% Ampersand \& %% Acute accent \' Left paren \( Right paren \) %% Asterisk \* Plus \+ Comma \, %% Minus \- Point \. Solidus \/ %% Colon \: Semicolon \; Less than \< %% Equals \= Greater than \> Question mark \? %% Commercial at \@ Left bracket \[ Backslash \\ %% Right bracket \] Circumflex \^ Underscore \_ %% Grave accent \` Left brace \{ Vertical bar \| %% Right brace \} Tilde \~} %% % \iffalse % % \fi % % \Finale \endinput %%% Local Variables: %%% fill-column: 70 %%% coding: utf-8 %%% End: