\def\fileversion{v28href} \def\filedate{1999/05/17} % minitoc-hyper.sty %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% % Jean-Pierre Drucbert % ONERA/CERT/GPI % Office National d'\'Etudes et de Recherches A\'erospatiales % Centre d'\'Etudes et de Recherches de Toulouse % Groupe de Prestations Informatiques % Complexe Scientifique de Rangueil % 2, Avenue \'Edouard Belin % BP 4025 % F-31055 TOULOUSE CEDEX % FRANCE % % Phone +33-62-25-25-15 % % Email: drucbert@onecert.fr % % Please send me any (constructive) suggestions and comments. % %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% % Temporarily patched by Bernd Jaehne [Bernd.Jaehne@aeon.de] % and Didier Verna [verna@inf.enst.fr] to % work with hyperref.sty from s.rahtz@elsevier.co.uk % using input from Tony Roberts [aroberts@usq.edu.au] % For changes see comments %%BJ and %DV % % However: this patch works only when hyperref.sty is used, % otherwise errors occur. Thus it may be advisable to add code % so that minitoc runs both in standard and hyperref mode. %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% % History (contains some obsolete things... it is NOT % the REAL documentation) %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% % minitoc.sty --- redefines the \chapter command to display a % mini-table-of-contents at the beginning of every chapter. % Oct-90 Original version, by Nigel Ward. % Nov-91 Revised to reuse \chapter, \section, \subsection commands % transparently, generate toc-file-name automatically, % assorted other cleanup. Dan Jurafsky % Jun/Jul-93 New design, to avoid allocating a newwrite % for each chapter (!) % Added \chapterend to terminate the scope of a minitoc. % (IF YOU FORGOT PUTTING \chapterend at the end % of EACH chapter, an entry for the next chapter % will appear in each minitoc.) (Thanks to Yufan Hu). % Replaced ``minipage'' environnement by a ``verse'' % environnement, to allow a minitoc split across pages. % All the layout of the minitoc is in the % \minitableofcontents command, so if someboby wants % to redefine that layout, he has just to % rewrite it (and only it). % % You can inhibit the minitoc for the next chapter % by preceding it with \minitocno. (\minitocyes % is useless for the user: it is implicit AFTER % the \chapter* pseudo-chapters). % % Problems: you MUST have \chapterend to terminate each % chapter with a minitoc. % How about avoiding this constraint? % % The depth of the minitoc is user-adjustable with % the counter `minitocdepth' (as `tocdepth' for the table % of contents). % At least three passes (3!!!) of LaTeX are necessary to get % correct minitoc's (the first pass creates the .mtcX files, % the second uses them (but they may contain wrong page % numbers) and recreates them, the third should be ok). % % Works with \chapter[xxx]{yyy} and floating bodies. % Works with two columns (but the minitoc is in composed in % one column; how to make it to spread over the two column?) % Some mods added to work with xr.sty (external references). % xr.sty version 5 is much more tolerant. % 05Jul93 Version 2 % Added compatibility with hangcaption.sty (the option % hangcaption (if present) must be given BEFORE minitoc % option.) % BEWARE to options modifying \@caption % Version 3 not released (buggy) % 09Jul93 Version 4 % Added \if@realch to avoid contentslines from % pseudo-chapters to go into the toc! % The option file mtcoff.sty allows to use a latex % document with minitoc commands and to make them % transparent: just replace the minitoc option by % mtcoff. % 13Jul93 Version 5 % Added a selection mechanism to not write spurious things % in the minitoc's. % 15Jul93 Version 6 % Fixed problems about chapters in the toc, % removed obsolete \caption stuff (filters are better) % added compatibility with toch.sty % (toch.sty makes a table of chapters. If used, % must be loaded BEFORE minitoc.sty) % 22Jul93 Version 7 (MAJOR DIFFERENCES) % Completely rewritten, using tricks from xr.sty % (the version 5, by David Carlisle). The info % for minitocs is directly stolen from the .toc % file. % \chapterend and \minitocno are suppressed % \minitoc, \dominitoc and \faketableofcontents added % 29Jul93 Version 8 % Spacing adjustements. % 04Aug93 Version 9 % Added mods for MS-DOS (search MS-DOS, uncomment; % search UNIX, comment out). MS-DOS allows only % 3 characters for extensions in file names (what a pity!). % 05Aug93 Version 10 % Works with appendices. % Detects obsolete versions of latex.tex. % (\@inputcheck or \reset@font not defined). % 18Aug93 Version 11 % Added \mtcSfont, font for section entries, % \mtcSSfont for subsection entries, % \mtcSSSfont for subsubsection entries, % \mtcPfont for paragraph entries, % \mtcSPfont for subparagraph entries. % % 16Dec93 Version 12 % Use \kern's in place of \vspace*'s, % and added penalties (\nopagebreak) to % avoid a page break just before last \mtc@rule. % Also added a \samepage environnement. % Removed old commented out lines from % previous versions. % % 17Dec93 Version 13 % Added minilof and minilot stuff. % For MS-DOS, uncomment the definition of \SHORTEXT. % % 03Jan94 Version 14 % Corrected space under minitoc/lof/lot and added a % \raggedright to avoid ``underfull'' warnings. % Corrected some spacing problems (avoiding ~'s). % \mtifont changed from \normalsize\bf to % \large\bf. % Some mods suggested by Donald Arseneau (thanks): % \@newread becomes \newread, not outer % version of \newread. % \empty replaced by \relax in the spare definition % of \reset@font. % Removed \clubpenalty=10000 and \widowpenalty=10000 % (done by \samepage), and \noindent. % Simplified processing of optional argument in % \minitoc, \minilof and \minilot. % % 27Jan94 Version 15 % Added parttoc, partlof and partlot for books, % with commands and parameters parallel to % those for mini-things. % % Added secttoc, sectlof and sectlot for articles, % with commands and parameters parallel to % those for mini-things. % % 02Feb94 Version 16 % Bug fixes (typos). % % 23Jun94 Version 17 % Keyword 'n' (null) synonym of 'e' (empty). % Compatibility with LaTeX ``2e''. % Thanks to Denis Roegel (who found % the problem) and Frank Mittelbach % (who gave the hints to solve). % % 26Jun94 Version 18 % Make minitoc really compatible with latex2e % Introduce the language files as options % Thanks to Michel Goossens (via Frank Mittelbach) % who was inspired by the code of babel (Johannes Braams). % % 16Aug94 Version 19 % Added stuff for numbering of chapters (parts, % sections) not starting at 1. % \firstchapteris etc. commands added. % \mtcrule, \nomtcrule etc. commands added. % Corrected a bug in \c@mti. % Corrected mtcswedish.sty (Jan Michel Rynning) % Corrected appendix in articles % % 25Aug94 Version 20 % Corrected spacing before and after minitocs % and siblings. % Added \mtcpagenumbers and \nomtcpagenumbers % (and siblings) to make minitocs with/without % page numbers. Default: page numbers. % Corrected (difficult bug) appendix in articles. % Corrected vertical spacing. % Corrected a problem with chapters numbered % with (uppercase) roman numbers. % % 07Sep94 Version 21 % Corrected typos in minitoc.sty and minitoc.tex. % % 10Oct94 Version 22 % Corrected typos in minitoc.sty. % % 08Nov94 Version 23 % Added a missing line in \sectlof@. % Works with document classes resetting % chapter (or section) number at each part. % (Thanks to Denis Roegel) % Removed stuff for \firstchapteris and co. % These commands are obsolete. % Removed appendix stuff. % % 21Dec94 Version 24 % The \protect commands have been removed from % the .toc, .lot and .lot files, so some internal % macros have been corrected to be compatible % with the LaTeX2e release of December 1994. % Thanks to Denis Roegel who did the work. % % 13Sep96 Version 25 % Updated mtcnorsk.sty and added mtcnynorsk.sty % on a suggestion from Dag Langmyhr (dag@ifi.uio.no). % % 14Nov96 Version 26 % Language specific commands are now names .mld % (in place of mtc.sty) because there are not % packages and it makes shorter names. % Added breton, estonian, germanb, greek, irish, % russianb, scottish, lower and upper sorbian; % renamed esperanto into esperant like in Babel. % % 20Dec96 Version 27 % Corrections for starred sectionning commands. % english.mld loaded as default language. % Added vietnam.mld. % Added arab.mld. % Renamed minitocoff.sty into mtcoff.sty to % keep the name short. % % % Jean-Pierre Drucbert % %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% \NeedsTeXFormat{LaTeX2e}[1994/12/01]% %%% This file will not work with latex2.09 \ProvidesPackage{minitoc}[\filedate\space\fileversion\space The minitoc package] \typeout{*** minitoc package, version 27p ***}% \@ifundefined{part}% {}% {\typeout{*** part level macros available ***} \let\mtc@svpart\part %23 \def\part{\stepcounter{ptc}\mtc@svpart}} %23 \@ifundefined{chapter}% {% \@ifundefined{section}% {\typeout{*** no section or chapter level macros available ***}% \typeout{*** PLEASE VERIFY YOUR MAIN DOCUMENT CLASS ***}}% {\typeout{*** section level macros available ***} \let\mtc@svsection\section %23 \def\section{\stepcounter{stc}\mtc@svsection} %23 \let\mtc@svss\@ssect %23 %v25 \def\@ssect{\addtocounter{stc}{-1}\mtc@svss} %23 }% }% {\typeout{*** chapter level macros available ***} \let\mtc@svchapter\@chapter %23 \def\@chapter{\stepcounter{mtc}\mtc@svchapter} %23 } %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% % % ***** **** *** ***** % * * * * * % *** * * * * % * * * * * % ***** **** *** * % %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% %\def\SHORTEXT{SHORTEXT} %%% UNCOMMENT FOR DOS AND %%% SYSTEMS WITH SHORT EXTENSIONS %%% TO FILE NAMES %%% LEAVE IT COMMENTED OUT %%% FOR UNIX AND O.S. WITH %%% LONG EXTENSIONS %%% YOU CAN VERIFY BY LATEXING %%% AN EXAMPLE DOCUMENT %%% ONE OF THE FOLLOWING MESSAGES APPEARS %%% PLEASE CORRECT IF THE MESSAGE IS WRONG % v27 : claim the type of system! \@ifundefined{SHORTEXT}% {\typeout{==> this version is configured for UNIX-like (long extensions) file names.}}% {\typeout{==> this version is configured for MSDOS-like (8+3) file names.}} % %not outer version of \newread \def\newread{\alloc@6\read\chardef\sixt@@n} \@ifundefined{@inputcheck}% {\typeout{Your version of latex.tex is obsolete.}% \typeout{Trying to continue...}\newread\@inputcheck\relax}{} \@ifundefined{reset@font}% {\typeout{Your version of latex.tex is very obsolete.}% \typeout{Trying to continue...}\let\reset@font\relax}{} \newwrite\tf@mtc % a file descriptor to write minitocs \newtoks\mtc@toks \def\mtc@string{\relax} \newbox\mtc@strutbox \setbox\mtc@strutbox=\hbox{\vrule height2.5ex depth1.8ex width\z@} \def\mtc@strut{\relax\ifmmode\copy\mtc@strutbox\else\unhcopy\mtc@strutbox\fi} \def\mtc@v{\leavevmode% \mtc@strut\vphantom{Lp$^{l^l}_{p_p}$}} % a pseudo-strut ? % \@BBR discourages page breaks \def\@BBR{\unpenalty\nopagebreak[4]} % Modified version to ignore the dots and the page number. % 17b \def\@undottedtocline#1#2#3#4#5{\ifnum #1>\c@tocdepth \else % 17b \vskip \z@ plus.2\p@ % 17b {\leftskip #2\relax \rightskip \@tocrmarg \parfillskip -\rightskip % 17b \parindent #2\relax\@afterindenttrue % 17b \interlinepenalty\@M % 17b \leavevmode % 17b \@tempdima #3\relax \advance\leftskip \@tempdima \hbox{}% % 17b \hskip -\leftskip % 17b #4\nobreak\hfill \nobreak % 17b \null\par}\fi} % 17b %% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%17b \def\mtcpagenumbers{\let\mtc@pgno\null} %17b \mtcpagenumbers %default %17b \def\nomtcpagenumbers{\let\mtc@pgno\relax} %17b \def\stcpagenumbers{\let\stc@pgno\null} %17b \stcpagenumbers %default %17b \def\nostcpagenumbers{\let\stc@pgno\relax} %17b \def\ptcpagenumbers{\let\ptc@pgno\null} %17b \ptcpagenumbers %default %17b \def\noptcpagenumbers{\let\ptc@pgno\relax} %17b %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%17b \def\mlfpagenumbers{\let\mlf@pgno\null} %17b \mlfpagenumbers %default %17b \def\nomlfpagenumbers{\let\mlf@pgno\relax} %17b \def\slfpagenumbers{\let\slf@pgno\null} %17b \slfpagenumbers %default %17b \def\noslfpagenumbers{\let\slf@pgno\relax} %17b \def\plfpagenumbers{\let\plf@pgno\null} %17b \plfpagenumbers %default %17b \def\noplfpagenumbers{\let\plf@pgno\relax} %17b %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%17b \def\mltpagenumbers{\let\mlt@pgno\null} %17b \mltpagenumbers %default %17b \def\nomltpagenumbers{\let\mlt@pgno\relax} %17b \def\sltpagenumbers{\let\slt@pgno\null} %17b \sltpagenumbers %default %17b \def\nosltpagenumbers{\let\slt@pgno\relax} %17b \def\pltpagenumbers{\let\plt@pgno\null} %17b \pltpagenumbers %default %17b \def\nopltpagenumbers{\let\plt@pgno\relax} %17b %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%17b % if you don't want a table of contents, but want minitocs, % you need to create the .toc file, without inputing it % into your document. This command is a stripped off version % of \tableofcontents \def\faketableofcontents{\fake@starttoc{toc}} % idem for list of figures \def\fakelistoffigures{\fake@starttoc{lof}} % idem for list of tables \def\fakelistoftables{\fake@starttoc{lot}} \def\fake@starttoc#1{\begingroup \makeatletter \if@filesw \expandafter\newwrite\csname tf@#1\endcsname \immediate\openout \csname tf@#1\endcsname \jobname.#1\relax \fi \global\@nobreakfalse \endgroup} %% \global\let\mtc@markboth\markboth \global\let\@mkboth\markboth %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% \@ifundefined{chapter}{}{% \def\The@chapter{\arabic{mtc}} %23 \def\firstchapteris#1% {\typeout{^^JWARNING*** \string\firstchapteris}% \typeout{ is an obsolete command^^J}} \newcounter{mtc} % counter of minitocs \setcounter{mtc}{0} \gdef\themtc{\arabic{mtc}} \newcounter{minitocdepth} % analog to tocdepth, but for minitocs \setcounter{minitocdepth}{2} % default value \def\mtc@rule{\kern-3\p@% \hrule width \columnwidth \kern2.6\p@} % the \hrule is .4pt high \newlength\mtcindent % indentation (left/right) of minitocs \mtcindent=24pt % defaut value \def\mtcfont{\small\rm} % font for the minitoc \def\mtcSfont{\small\bf} % font for the minitoc (sections) \def\mtcSSfont{\mtcfont} % font for the minitoc (subsections) \def\mtcSSSfont{\mtcfont} % font for the minitoc (subsubsections) \def\mtcPfont{\mtcfont} % font for the minitoc (paragraphs) \def\mtcSPfont{\mtcfont} % font for the minitoc (subparagraphs) \def\mlffont{\mtcfont} % font for the minilof (figures) \def\mltfont{\mtcfont} % font for the minilot (tables) \def\mtifont{\large\bf} % font for titles % Centering, flushleft, flushright or empty titles. \def\c@mti#1{\null\hfill #1\hfill\null} \def\l@mti#1{\null #1\hfill\null} \def\r@mti#1{\null\hfill #1\null} \def\e@mti#1{\relax} \def\n@mti#1{\relax} % Default: titles on left \let\do@mtitc\l@mti \let\df@mtitc\l@mti \let\do@mtilf\l@mti \let\df@mtilf\l@mti \let\do@mtilt\l@mti \let\df@mtilt\l@mti %v27 Language dependent names: default values. Now %v27 english.mld is loaded first. %v27 \@ifundefined{mtctitle}{\def\mtctitle{Contents}}{\relax} %v27 \@ifundefined{mlftitle}{\def\mlftitle{Figures}}{\relax} %v27 \@ifundefined{mlttitle}{\def\mlttitle{Tables}}{\relax} \def\mtc@verse{\let\\=\@centercr \list{}{\itemsep\z@\itemindent \z@\listparindent \itemindent \leftmargin\mtcindent \rightmargin\leftmargin}\item[]} \def\endmtc@verse{\nopagebreak[4]\endlist} % this command must be used after \chapter % if you need a minitoc (no automatic minitoc) \def\minitoc{\@ifnextchar[{\minitoc@}{\minitoc@[d]}} \def\minitoc@[#1]{% \relax\begin{samepage}% we begin a local group here, using samepage \if #1e\let\do@mtitc\e@mti \else\if #1n\let\do@mtitc\n@mti \else\if #1c\let\do@mtitc\c@mti \else\if #1l\let\do@mtitc\l@mti \else\if #1r\let\do@mtitc\r@mti \else\if #1d\let\do@mtitc\df@mtitc \fi\fi\fi\fi\fi\fi \raggedright % added #14 \parskip=\z@% \reset@font\mtcfont% \parindent=\z@% \nopagebreak[4]% \kern-0.8\baselineskip\nopagebreak[4]% \par\noindent %% \ifx\mtc@rule\relax \begin{tabular}{@{}p{\columnwidth}@{}} {\reset@font\mtifont\do@mtitc{\mtc@v\mtctitle}}\\ \end{tabular}\else \begin{tabular}{@{}p{\columnwidth}@{}} {\reset@font\mtifont\do@mtitc{\mtc@v\mtctitle}}\\\hline \end{tabular}\fi \nopagebreak[4]\null\leavevmode\vrule width \z@ height \z@ depth \z@\\\@BBR% \leftmargin\mtcindent \rightmargin\mtcindent \itemindent=\z@\labelwidth=\z@% \labelsep=\z@\listparindent=\z@% \begin{mtc@verse}\c@tocdepth=\c@minitocdepth% \leavevmode\\\@BBR% this blank line is necessary to avoid % a wild negative indentation \vskip -.5\baselineskip \begingroup \makeatletter \@ifundefined{mtc@pgno}% {\let\@dottedtocline\@undottedtocline}{} \@ifundefined{SHORTEXT}% {\def\@tocfile{mtc\The@chapter}}% % UNIX {\def\@tocfile{M\The@chapter}}% % MS-DOS \@input{\jobname.\@tocfile}\if@filesw \fi% \global\@nobreakfalse\endgroup \end{mtc@verse}% \kern0.\baselineskip% \nopagebreak[4]\mtc@rule\null\leavevmode\\% \vskip-1.0\baselineskip \vrule width \z@ height \z@ depth \z@\end{samepage}% %## the \\ is essential \par\pagebreak[1]\vspace*{-1ex}}% % some space under the minitoc % Added in version #13 % this command must be used after \chapter % if you need a minilof (no automatic minilof) \def\minilof{\@ifnextchar[{\minilof@}{\minilof@[d]}} \def\minilof@[#1]{% \relax\begin{samepage}% we begin a local group here, using samepage \if #1e\let\do@mtilf\e@mti \else\if #1n\let\do@mtilf\n@mti \else\if #1c\let\do@mtilf\c@mti \else\if #1l\let\do@mtilf\l@mti \else\if #1r\let\do@mtilf\r@mti \else\if #1d\let\do@mtilf\df@mtilf \fi\fi\fi\fi\fi\fi \raggedright % added #14 \parskip=\z@% \reset@font\mlffont% \parindent=\z@% \nopagebreak[4]% \kern-0.8\baselineskip\nopagebreak[4]% \par\noindent \ifx\mtc@rule\relax \begin{tabular}{@{}p{\columnwidth}@{}} {\reset@font\mtifont\do@mtilf{\mtc@v\mlftitle}}\\ \end{tabular}\else \begin{tabular}{@{}p{\columnwidth}@{}} {\reset@font\mtifont\do@mtilf{\mtc@v\mlftitle}}\\\hline \end{tabular}\fi \nopagebreak[4]\null\leavevmode\vrule width \z@ height \z@ depth \z@\\\@BBR% \leftmargin\mtcindent \rightmargin\mtcindent \itemindent=\z@\labelwidth=\z@% \labelsep=\z@\listparindent=\z@% % depth does not matter for minilof \begin{mtc@verse}%\c@tocdepth=\c@minitocdepth% \leavevmode\\\@BBR% this blank line is necessary to avoid % a wild negative indentation \vskip -.5\baselineskip \begingroup \makeatletter \@ifundefined{mlf@pgno}% {\let@dottedtocline\@undottedtocline}{} \@ifundefined{SHORTEXT}% {\def\@tocfile{mlf\The@chapter}}% % UNIX {\def\@tocfile{F\The@chapter}}% % MS-DOS \@input{\jobname.\@tocfile}\if@filesw \fi% \global\@nobreakfalse\endgroup \end{mtc@verse}% \kern0.\baselineskip% \nopagebreak[4]\mtc@rule\null\leavevmode\\% \vskip-1.0\baselineskip \vrule width \z@ height \z@ depth \z@\end{samepage}% %## the \\ is essential \par\pagebreak[1]\vspace*{-1ex}}% % some space under the minilof % Added in version #13 % this command must be used after \chapter % if you need a minilot (no automatic minilot) \def\minilot{\@ifnextchar[{\minilot@}{\minilot@[d]}} \def\minilot@[#1]{% \relax\begin{samepage}% we begin a local group here, using samepage \if #1e\let\do@mtilt\e@mti \else\if #1n\let\do@mtilt\n@mti \else\if #1c\let\do@mtilt\c@mti \else\if #1l\let\do@mtilt\l@mti \else\if #1r\let\do@mtilt\r@mti \else\if #1d\let\do@mtilt\df@mtilt \fi\fi\fi\fi\fi\fi \raggedright % added #14 \parskip=\z@% \reset@font\mltfont% \parindent=\z@% \nopagebreak[4]% \kern-0.8\baselineskip\nopagebreak[4]% \par\noindent \ifx\mtc@rule\relax \begin{tabular}{@{}p{\columnwidth}@{}} {\reset@font\mtifont\do@mtilt{\mtc@v\mlttitle}}\\ \end{tabular}\else \begin{tabular}{@{}p{\columnwidth}@{}} {\reset@font\mtifont\do@mtilt{\mtc@v\mlttitle}}\\\hline \end{tabular}\fi \nopagebreak[4]\null\leavevmode\vrule width \z@ height \z@ depth \z@\\\@BBR% \leftmargin\mtcindent \rightmargin\mtcindent \itemindent=\z@\labelwidth=\z@% \labelsep=\z@\listparindent=\z@% % depth does not matter for minilot \begin{mtc@verse}%\c@tocdepth=\c@minitocdepth% \leavevmode\\\@BBR% this blank line is necessary to avoid % a wild negative indentation \vskip -.5\baselineskip \begingroup \makeatletter \@ifundefined{mlt@pgno}% {\let\@dottedtocline\@undottedtocline}{} \@ifundefined{SHORTEXT}% {\def\@tocfile{mlt\The@chapter}}% % UNIX {\def\@tocfile{T\The@chapter}}% % MS-DOS \@input{\jobname.\@tocfile}\if@filesw \fi% \global\@nobreakfalse\endgroup \end{mtc@verse}% \kern0.\baselineskip% \nopagebreak[4]\mtc@rule\null\leavevmode\\% \vskip-1.0\baselineskip \vrule width \z@ height \z@ depth \z@\end{samepage}% %## the \\ is essential \par\pagebreak[1]\vspace*{-1ex}}% % some space under the minilot % I use a depth of 10000 to inhibit the printing of % that contentsline. \def\l@xchapter{\@dottedtocline{\@M}{1em}{2.3em}} \def\xchapter{xchapter} \let\sv@chapter\@chapter \def\@chapter[#1]#2{\sv@chapter[{#1}]{#2}\relax% \addcontentsline{lof}{xchapter}{#1}% \addcontentsline{lot}{xchapter}{#1}% } % tricky code to deal with \chapter* \let\mtc@schapter\@schapter \def\@schapter{% \addtocontents{toc}{\protect\chapterend}\mtc@schapter% } \def\@schapter{% \addtocontents{toc}{\protect\chapterbegin}\mtc@schapter% } \let\chapterend\relax \let\chapterbegin\relax \let\appendixmtc\relax % this command extracts info from the .toc file % and create the .mtcN files (.mtc -> .M on MS-DOS) \def\@dominitoc#1{{% \makeatletter \setcounter{mtc}{0} % START VALUE \MTC@next#1.toc\relax\\}\setcounter{mtc}{0}} %23: raz % this command extracts info from the .lof file % and create the .mlfN files (.mlf -> .F on MS-DOS) \def\@dominilof#1{{% \makeatletter \setcounter{mtc}{0} % START VALUE \MLF@next#1.lof\relax\\}\setcounter{mtc}{0}} %23: raz % this command extracts info from the .lot file % and create the .mltN files (.mlt -> .T on MS-DOS) \def\@dominilot#1{{% \makeatletter \setcounter{mtc}{0} % START VALUE \MLT@next#1.lot\relax\\}\setcounter{mtc}{0}} %23: raz \def\dominitoc{\@ifnextchar[{\dominitoc@}{\dominitoc@[l]}} \def\dominilof{\@ifnextchar[{\dominilof@}{\dominilof@[l]}} \def\dominilot{\@ifnextchar[{\dominilot@}{\dominilot@[l]}} \def\dominitoc@[#1]{% \if #1e\let\df@mtitc\e@mti% \else\if #1n\let\df@mtitc\n@mti% \else\if #1c\let\df@mtitc\c@mti% \else\if #1l\let\df@mtitc\l@mti% \else\if #1r\let\df@mtitc\r@mti% \fi\fi\fi\fi\fi% \@@dominitoc} \def\dominilof@[#1]{% \if #1e\let\df@mtilf\e@mti% \else\if #1n\let\df@mtilf\n@mti% \else\if #1c\let\df@mtilf\c@mti% \else\if #1l\let\df@mtilf\l@mti% \else\if #1r\let\df@mtilf\r@mti% \fi\fi\fi\fi\fi% \@@dominilof} \def\dominilot@[#1]{% \if #1e\let\df@mtilt\e@mti% \else\if #1n\let\df@mtilt\n@mti% \else\if #1c\let\df@mtilt\c@mti% \else\if #1l\let\df@mtilt\l@mti% \else\if #1r\let\df@mtilt\r@mti% \fi\fi\fi\fi\fi% \@@dominilot} \def\@@dominitoc{\@dominitoc{\jobname}\immediate\closeout\tf@mtc} \def\@@dominilof{\@dominilof{\jobname}\immediate\closeout\tf@mtc} \def\@@dominilot{\@dominilot{\jobname}\immediate\closeout\tf@mtc} \def\MTC@next#1\relax#2\\{% \edef\MTC@list{#2}% \MTC@loop{#1}} \def\MTC@toc{% \ifx\MTC@list\@empty\else\expandafter\MTC@explist\fi} %%%%%%% patch minitoc to write *.mtc files with link name at end % so that hyperref contentsline works properly---I hope \def\MTC@contentsline#1#2#3#4{% %%BJ: 4 instead of 3 parameters \gdef\themtc{\arabic{mtc}} \expandafter% \ifx\csname #1\endcsname\chapter\relax \stepcounter{mtc}% % the mtc counter simulates the chapter counter \@ifundefined{SHORTEXT}% {\typeout{Writing\space\jobname.mtc\themtc}% % UNIX \def\mtcname{\jobname.mtc\themtc}}% % UNIX {\typeout{Writing\space\jobname.M\themtc}% % MS-DOS \def\mtcname{\jobname.M\themtc}}% % MS-DOS \immediate\closeout\tf@mtc % close current .mtcN .mtc->.M on MS-DOS \immediate\openout\tf@mtc=\mtcname % open next .mtcN (.mtc->.M if MS-DOS) \fi \expandafter% % extracts and writes info for sections, etc. \ifx\csname #1\endcsname\section\relax \mtc@toks{\noexpand\leavevmode#2}% \edef\@tempa{\immediate\write\tf@mtc {% {\string\reset@font\string\mtcSfont\string\mtc@string% \string\contentsline{#1}% {\noexpand\the\mtc@toks}{\string\reset@font\string\mtcSfont% \space #3}{#4}}}}\@tempa% %%BJ: #4 is hyperlink \fi \expandafter% \ifx\csname #1\endcsname\subsection\relax \mtc@toks{\noexpand\leavevmode#2}% \edef\@tempa{\immediate\write\tf@mtc {% {\string\reset@font\string\mtcSSfont\string\mtc@string% \string\contentsline{#1}% {\noexpand\the\mtc@toks}{\string\reset@font\string\mtcSSfont% \space #3}{#4}}}}\@tempa% %%BJ: #4 is hyperlink \fi \expandafter% \ifx\csname #1\endcsname\subsubsection\relax \mtc@toks{\noexpand \leavevmode#2}% \edef\@tempa{\immediate\write\tf@mtc {% {\string\reset@font\string\mtcSSSfont\string\mtc@string% \string\contentsline{#1}% {\noexpand\the\mtc@toks}{\string\reset@font\string\mtcSSSfont% \space #3}{#4}}}}\@tempa% %%BJ: #4 is hyperlink \fi \expandafter% \ifx\csname #1\endcsname\paragraph\relax \mtc@toks{\noexpand\leavevmode#2}% \edef\@tempa{\immediate\write\tf@mtc {% {\string\reset@font\string\mtcPfont\string\mtc@string% \string\contentsline{#1}% {\noexpand\the\mtc@toks}{\string\reset@font\string\mtcPfont% \space #3}{#4}}}}\@tempa% %%BJ: #4 is hyperlink \fi \expandafter% \ifx\csname #1\endcsname\subparagraph\relax \mtc@toks{\noexpand\leavevmode#2}% \edef\@tempa{\immediate\write\tf@mtc {% {\string\reset@font\string\mtcSPfont\string\mtc@string% \string\contentsline{#1}% {\noexpand\the\mtc@toks}{\string\reset@font\string\mtcSPfont \space #3}{#4}}}}\@tempa% %%BJ: #4 is hyperlink \fi % Added v25: \starchapter and co. \expandafter% % extracts and writes info for sections, etc. \ifx\csname #1\endcsname\starchapter\relax \stepcounter{mtc}% % the mtc counter simulates the chapter counter \@ifundefined{SHORTEXT}% {\typeout{Writing\space\jobname.mtc\themtc}% % UNIX \def\mtcname{\jobname.mtc\themtc}}% % UNIX {\typeout{Writing\space\jobname.M\themtc}% % MS-DOS \def\mtcname{\jobname.M\themtc}}% % MS-DOS \immediate\closeout\tf@mtc % close current .mtcN .mtc->.M on MS-DOS \immediate\openout\tf@mtc=\mtcname % open next .mtcN (.mtc->.M if MS-DOS) \fi \expandafter% % extracts and writes info for sections, etc. \ifx\csname #1\endcsname\starsection\relax \mtc@toks{\noexpand\leavevmode#2}% \edef\@tempa{\immediate\write\tf@mtc {% {\string\reset@font\string\mtcSfont\string\mtc@string% \string\contentsline{#1}% {\noexpand\the\mtc@toks}{\string\reset@font\string\mtcSfont% \space #3}{#4}}}}\@tempa% %%BJ: #4 is hyperlink \fi \expandafter% \ifx\csname #1\endcsname\starsubsection\relax \mtc@toks{\noexpand\leavevmode#2}% \edef\@tempa{\immediate\write\tf@mtc {% {\string\reset@font\string\mtcSSfont\string\mtc@string% \string\contentsline{#1}% {\noexpand\the\mtc@toks}{\string\reset@font\string\mtcSSfont% \space #3}{#4}}}}\@tempa% %%BJ: #4 is hyperlink \fi \expandafter% \ifx\csname #1\endcsname\starsubsubsection\relax \mtc@toks{\noexpand \leavevmode#2}% \edef\@tempa{\immediate\write\tf@mtc {% {\string\reset@font\string\mtcSSSfont\string\mtc@string% \string\contentsline{#1}% {\noexpand\the\mtc@toks}{\string\reset@font\string\mtcSSSfont% \space #3}{#4}}}}\@tempa% %%BJ: #4 is hyperlink \fi \expandafter% \ifx\csname #1\endcsname\starparagraph\relax \mtc@toks{\noexpand\leavevmode#2}% \edef\@tempa{\immediate\write\tf@mtc {% {\string\reset@font\string\mtcPfont\string\mtc@string% \string\contentsline{#1}% {\noexpand\the\mtc@toks}{\string\reset@font\string\mtcPfont% \space #3}{#4}}}}\@tempa% %%BJ: #4 is hyperlink \fi \expandafter% \ifx\csname #1\endcsname\starsubparagraph\relax \mtc@toks{\noexpand\leavevmode#2}% \edef\@tempa{\immediate\write\tf@mtc {% {\string\reset@font\string\mtcSPfont\string\mtc@string% \string\contentsline{#1}% {\noexpand\the\mtc@toks}{\string\reset@font\string\mtcSPfont \space #3}{#4}}}}\@tempa% %%BJ: #4 is hyperlink \fi } \def\MTC@explist{\expandafter\MTC@next\MTC@list\\} \def\MTC@loop#1{\openin\@inputcheck#1\relax \ifeof\@inputcheck \typeout{^^JNo file #1^^JMINITOCS NOT PREPARED.^^J}% \expandafter\MTC@toc \else \typeout{PREPARING MINITOCS FROM #1}% \expandafter\MTC@read\fi} \def\MTC@read{% \read\@inputcheck to\MTC@line \expandafter\MTC@test\MTC@line....\MTC@% }% % now patch MTC@test % %%BJ: call \MTC@contentsline with 4 instead of 3 parameters \newcommand{\scrubdots}[5]{#1} %%BJ: added by Tony Roberts \long\def\MTC@test#1#2#3#4#5\MTC@{% \ifx#1\contentsline \let\mtc@string\string \MTC@contentsline{#2}{#3}{#4}{\scrubdots#5}% %%BJ: 4. parameter added by Tony Roberts \let\mtc@string\relax \else\ifx#1\@input \edef\MTC@list{\MTC@list#2\relax}% \else\ifx#1\chapterend % \chapter* closes .mtcN (.mtc->.M on MS-DOS) \immediate\closeout\tf@mtc \immediate\openout\tf@mtc=\jobname.bmt % and opens a scratch file \else\ifx#1\chapterbegin \addtocounter{mtc}{-1}% % \chapter* has done a parasite increment \fi\fi\fi\fi \ifeof\@inputcheck\expandafter\MTC@toc \else\expandafter\MTC@read\fi}% %%%%%%%%%% end of minitoc patches \def\MLF@next#1\relax#2\\{% \edef\MLF@list{#2}% \MLF@loop{#1}} \def\MLF@lof{% \ifx\MLF@list\@empty\else\expandafter\MLF@explist\fi} \def\MLF@contentsline#1#2#3{% \gdef\themtc{\arabic{mtc}} \expandafter% \ifx\csname #1\endcsname\xchapter\relax \stepcounter{mtc}% % the mtc counter simulates the chapter counter \@ifundefined{SHORTEXT}% {\typeout{Writing\space\jobname.mlf\themtc}% % UNIX \def\mlfname{\jobname.mlf\themtc}}% % UNIX {\typeout{Writing\space\jobname.F\themtc}% % MS-DOS \def\mlfname{\jobname.F\themtc}}% % MS-DOS \immediate\closeout\tf@mtc % close current .mlfN .mlf->.F on MS-DOS \immediate\openout\tf@mtc=\mlfname % open next .mlfN (.mlf->.F if MS-DOS) \fi \expandafter% % extracts and writes info for sections, etc. \ifx\csname #1\endcsname\figure\relax \mtc@toks{\noexpand\leavevmode#2}% \edef\@tempa{\immediate\write\tf@mtc {% {\string\reset@font\string\mlffont\string\mtc@string% \string\contentsline{#1}% {\noexpand\the\mtc@toks}{\string\reset@font\string\mlffont% \space #3}}}}\@tempa \fi } \def\MLF@explist{\expandafter\MLF@next\MLF@list\\} \def\MLF@loop#1{\openin\@inputcheck#1\relax \ifeof\@inputcheck \typeout{^^JNo file #1^^JMINILOFS NOT PREPARED.^^J}% \expandafter\MLF@lof \else \typeout{PREPARING MINILOFS FROM #1}% \expandafter\MLF@read\fi} \def\MLF@read{% \read\@inputcheck to\MLF@line \expandafter\MLF@test\MLF@line....\MLF@% }% \long\def\MLF@test#1#2#3#4#5\MLF@{% \ifx#1\contentsline \let\mtc@string\string \MLF@contentsline{#2}{#3}{#4}% \let\mtc@string\relax \else\ifx#1\@input \edef\MLF@list{\MLF@list#2\relax}% \else\ifx#1\chapterend % \chapter* closes .mlfN (.mlf->.F on MS-DOS) \immediate\closeout\tf@mtc \immediate\openout\tf@mtc=\jobname.bmt % and opens a scratch file \else\ifx#1\chapterbegin \addtocounter{mtc}{-1}% % \chapter* has done a parasite increment \fi\fi\fi\fi \ifeof\@inputcheck\expandafter\MLF@lof \else\expandafter\MLF@read\fi}% \def\MLT@next#1\relax#2\\{% \edef\MLT@list{#2}% \MLT@loop{#1}} \def\MLT@lot{% \ifx\MLT@list\@empty\else\expandafter\MLT@explist\fi} \def\MLT@contentsline#1#2#3{% \gdef\themtc{\arabic{mtc}} \expandafter% \ifx\csname #1\endcsname\xchapter\relax \stepcounter{mtc}% % the mtc counter simulates the chapter counter \@ifundefined{SHORTEXT}% {\typeout{Writing\space\jobname.mlt\themtc}% % UNIX \def\mltname{\jobname.mlt\themtc}}% % UNIX {\typeout{Writing\space\jobname.T\themtc}% % MS-DOS \def\mltname{\jobname.T\themtc}}% % MS-DOS \immediate\closeout\tf@mtc % close current .mltN .mlt->.T on MS-DOS \immediate\openout\tf@mtc=\mltname % open next .mltN (.mlt->.T if MS-DOS) \fi \expandafter% % extracts and writes info for sections, etc. \ifx\csname #1\endcsname\table\relax \mtc@toks{\noexpand\leavevmode#2}% \edef\@tempa{\immediate\write\tf@mtc {% {\string\reset@font\string\mltfont\string\mtc@string% \string\contentsline{#1}% {\noexpand\the\mtc@toks}{\string\reset@font\string\mltfont% \space #3}}}}\@tempa \fi } \def\MLT@explist{\expandafter\MLT@next\MLT@list\\} \def\MLT@loop#1{\openin\@inputcheck#1\relax \ifeof\@inputcheck \typeout{^^JNo file #1^^JMINILOTS NOT PREPARED.^^J}% \expandafter\MLT@lot \else \typeout{PREPARING MINILOTS FROM #1}% \expandafter\MLT@read\fi} \def\MLT@read{% \read\@inputcheck to\MLT@line \expandafter\MLT@test\MLT@line....\MLT@% }% \long\def\MLT@test#1#2#3#4#5\MLT@{% \ifx#1\contentsline \let\mtc@string\string \MLT@contentsline{#2}{#3}{#4}% \let\mtc@string\relax \else\ifx#1\@input \edef\MLT@list{\MLT@list#2\relax}% \else\ifx#1\chapterend % \chapter* closes .mltN (.mlt->.T on MS-DOS) \immediate\closeout\tf@mtc \immediate\openout\tf@mtc=\jobname.bmt % and opens a scratch file \else\ifx#1\chapterbegin \addtocounter{mtc}{-1}% % \chapter* has done a parasite increment \fi\fi\fi\fi \ifeof\@inputcheck\expandafter\MLT@lot \else\expandafter\MLT@read\fi}% } % end of chapter level %%%%%%%%%%%%%%%%%%%%%%%%% %% % If \part is defined (book or article-like document), % the following macros are allowed % Sometimes, we need to make a difference between book and % article (is \chapter defined?), to have a different layout. \@ifundefined{part}{}% {% \def\xpart{xpart} \def\Thepart{\arabic{part}} \def\firstpartis#1% {\typeout{^^JWARNING*** \string\firstpartis}% \typeout{ is an obsolete command^^J}} \newcounter{ptc} % counter of parttocs \setcounter{ptc}{0} \def\theptc{\arabic{ptc}} \newcounter{parttocdepth} % analog to tocdepth, but for parttocs \setcounter{parttocdepth}{2} \@ifundefined{chapter}{% \def\ptc@rule{\kern-3\p@% \hrule width \columnwidth \kern2.6\p@}% the \hrule is .4pt high }{\let\ptc@rule\relax} % no rule before/after parttoc/partlof/partlot % for books \newlength\ptcindent % indentation (left/right) of parttocs \@ifundefined{chapter}{\ptcindent=24pt}{\ptcindent=0pt} % defaut value \@ifundefined{chapter}{% \def\ptcfont{\small\rm} % font for the parttoc \def\ptcSfont{\small\bf} % font for the parttoc (sections) \def\ptcSSfont{\ptcfont} % font for the parttoc (subsections) \def\ptcSSSfont{\ptcfont} % font for the parttoc (subsubsections) \def\ptcPfont{\ptcfont} % font for the parttoc (paragraphs) \def\ptcSPfont{\ptcfont} % font for the parttoc (subparagraphs) \def\plffont{\ptcfont} % font for the partlof (figures) \def\pltfont{\ptcfont} % font for the partlot (tables) \def\ptifont{\large\bf} % font for titles }{% \def\ptcfont{\normalsize\rm} % font for the parttoc \def\ptcCfont{\normalsize\bf} % font for the parttoc (chapters) \def\ptcSfont{\normalsize\rm} % font for the parttoc (sections) \def\ptcSSfont{\ptcfont} % font for the parttoc (subsections) \def\ptcSSSfont{\ptcfont} % font for the parttoc (subsubsections) \def\ptcPfont{\ptcfont} % font for the parttoc (paragraphs) \def\ptcSPfont{\ptcfont} % font for the parttoc (subparagraphs) \def\plffont{\ptcfont} % font for the partlof (figures) \def\pltfont{\ptcfont} % font for the partlot (tables) \def\ptifont{\Huge\bf} % font for titles } % Centering, flushleft, flushright or empty titles. \@ifundefined{chapter}{% \def\c@pti#1{\null\hfill #1\hfill\null} \def\l@pti#1{\null #1\hfill\null} \def\r@pti#1{\null\hfill #1\null} \def\e@pti#1{\relax} \def\n@pti#1{\relax} }{% \def\e@pti#1{\relax} \def\n@pti#1{\relax} \def\l@pti#1{\if@twocolumn \@topnewpage[\@makephead@l{#1}]% \else \@makephead@l{#1}% \@afterheading \fi} \def\@makephead@l#1{% \vspace*{50\p@}% {\parindent \z@ \raggedright \ptifont #1\par \nobreak \vskip 40\p@ }} \def\r@pti#1{\if@twocolumn \@topnewpage[\@makephead@r{#1}]% \else \@makephead@r{#1}% \@afterheading \fi} \def\@makephead@r#1{% \vspace*{50\p@}% {\parindent \z@ \raggedleft \ptifont #1\par \nobreak \vskip 40\p@ }} \def\c@pti#1{\if@twocolumn \@topnewpage[\@makephead@c{#1}]% \else \@makephead@c{#1}% \@afterheading \fi} \def\@makephead@c#1{% \vspace*{50\p@}% {\parindent \z@ \centering \ptifont #1\par \nobreak \vskip 40\p@ }}% } % Default: titles on left \let\do@ptitc\l@pti \let\df@ptitc\l@pti \let\do@ptilf\l@pti \let\df@ptilf\l@pti \let\do@ptilt\l@pti \let\df@ptilt\l@pti %v27 % Language dependent names: default values %v27 \@ifundefined{chapter}{% %v27 \@ifundefined{ptctitle}{\def\ptctitle{Contents}}{\relax} %v27 \@ifundefined{plftitle}{\def\plftitle{Figures}}{\relax} %v27 \@ifundefined{plttitle}{\def\plttitle{Tables}}{\relax}}% %v27 {% %v27 \@ifundefined{ptctitle}{\def\ptctitle{Table of Contents}}{\relax} %v27 \@ifundefined{plftitle}{\def\plftitle{List of Figures}}{\relax} %v27 \@ifundefined{plttitle}{\def\plttitle{List of Tables}}{\relax} %v27 } \def\ptc@verse{\let\\=\@centercr \list{}{\itemsep\z@\itemindent \z@\listparindent \itemindent \leftmargin\ptcindent \rightmargin\leftmargin}\item[]} \def\endptc@verse{\nopagebreak[4]\endlist} % this command must be used after \part % if you need a parttoc (no automatic parttoc) \def\parttoc{\@ifnextchar[{\parttoc@}{\parttoc@[d]}} \def\parttoc@[#1]{% \@ifundefined{chapter}{}{\cleardoublepage \global\let\mtc@markboth\markboth \global\let\@mkboth\markboth \thispagestyle{empty} \mtc@markboth{\uppercase{\ptctitle}}{\uppercase{\ptctitle}}% }% \relax\begin{samepage}% we begin a local group here, using samepage \if #1e\let\do@ptitc\e@pti \else\if #1n\let\do@ptitc\n@pti \else\if #1c\let\do@ptitc\c@pti \else\if #1l\let\do@ptitc\l@pti \else\if #1r\let\do@ptitc\r@pti \else\if #1d\let\do@ptitc\df@ptitc \fi\fi\fi\fi\fi\fi \raggedright % added #14 \parskip=\z@% \reset@font\ptcfont% \parindent=\z@% \nopagebreak[4]% \kern-0.8\baselineskip\nopagebreak[4]% \par\noindent \nopagebreak[4]% \ifx\ptc@rule\relax \begin{tabular}{@{}p{\columnwidth}@{}} {\reset@font\ptifont\do@ptitc{\mtc@v\ptctitle}}\\ \end{tabular}\else \begin{tabular}{@{}p{\columnwidth}@{}} {\reset@font\ptifont\do@ptitc{\mtc@v\ptctitle}}\\\hline \end{tabular}\fi \nopagebreak[4]\null\leavevmode\vrule width \z@ height \z@ depth \z@\\\@BBR% \leftmargin\ptcindent \rightmargin\ptcindent \itemindent=\z@\labelwidth=\z@% \labelsep=\z@\listparindent=\z@% \begin{ptc@verse}\c@tocdepth=\c@parttocdepth% \leavevmode\\\@BBR% this blank line is necessary to avoid % a wild negative indentation \vskip -.5\baselineskip \begingroup \makeatletter \@ifundefined{ptc@pgno}% {\let\@dottedtocline\@undottedtocline}{} \@ifundefined{SHORTEXT}% {\def\@tocfile{ptc\Thepart}}% % UNIX {\def\@tocfile{P\Thepart}}% % MS-DOS \@input{\jobname.\@tocfile}\if@filesw \fi% \global\@nobreakfalse\endgroup \end{ptc@verse}% \kern0.\baselineskip% \nopagebreak[4]\ptc@rule\null\leavevmode\\% \vskip-1.0\baselineskip \vrule width \z@ height \z@ depth \z@\end{samepage}% %## the \\ is essential \par\@ifundefined{chapter}{\pagebreak[1]\vspace*{-1ex}}% {\cleardoublepage}} % this command must be used after \part % if you need a partlof (no automatic partlof) \def\partlof{\@ifnextchar[{\partlof@}{\partlof@[d]}} \def\partlof@[#1]{% \@ifundefined{chapter}{}{\cleardoublepage \global\let\mtc@markboth\markboth \global\let\@mkboth\markboth \thispagestyle{empty} \mtc@markboth{\uppercase{\plftitle}}{\uppercase{\plftitle}}% }% \relax\begin{samepage}% we begin a local group here, using samepage \if #1e\let\do@ptilf\e@pti \else\if #1n\let\do@ptilf\n@pti \else\if #1c\let\do@ptilf\c@pti \else\if #1l\let\do@ptilf\l@pti \else\if #1r\let\do@ptilf\r@pti \else\if #1d\let\do@ptilf\df@ptilf \fi\fi\fi\fi\fi\fi \raggedright % added #14 \parskip=\z@% \reset@font\plffont% \parindent=\z@% \nopagebreak[4]% \kern-0.8\baselineskip\nopagebreak[4]% \par\noindent \ifx\ptc@rule\relax \begin{tabular}{@{}p{\columnwidth}@{}} {\reset@font\ptifont\do@ptilf{\mtc@v\plftitle}}\\ \end{tabular}\else \begin{tabular}{@{}p{\columnwidth}@{}} {\reset@font\ptifont\do@ptilf{\mtc@v\plftitle}}\\ \@ifundefined{chapter}{\hline}{} \end{tabular}\fi \nopagebreak[4]\null\leavevmode\vrule width \z@ height \z@ depth \z@\\\@BBR% \leftmargin\ptcindent \rightmargin\ptcindent \itemindent=\z@\labelwidth=\z@% \labelsep=\z@\listparindent=\z@% % depth does not matter for partlof \begin{ptc@verse}%\c@tocdepth=\c@parttocdepth% \leavevmode\\\@BBR% this blank line is necessary to avoid % a wild negative indentation \vskip -.5\baselineskip \begingroup \makeatletter \@ifundefined{plf@pgno}% {\let\@dottedtocline\@undottedtocline}{} \@ifundefined{SHORTEXT}% {\def\@tocfile{plf\Thepart}}% % UNIX {\def\@tocfile{G\Thepart}}% % MS-DOS \@input{\jobname.\@tocfile}\if@filesw \fi% \global\@nobreakfalse\endgroup \end{ptc@verse}% \kern0.\baselineskip% \nopagebreak[4]\ptc@rule\null\leavevmode\\% \vskip-1.0\baselineskip \vrule width \z@ height \z@ depth \z@\end{samepage}% %## the \\ is essential \par\@ifundefined{chapter}{\pagebreak[1]\vspace*{-1ex}}% {\cleardoublepage}} % Added in version #13 % this command must be used after \part % if you need a minilot (no automatic partlot) \def\partlot{\@ifnextchar[{\partlot@}{\partlot@[d]}} \def\partlot@[#1]{% \@ifundefined{chapter}{}{\cleardoublepage \global\let\mtc@markboth\markboth \global\let\@mkboth\markboth \thispagestyle{empty} \mtc@markboth{\uppercase{\plttitle}}{\uppercase{\plttitle}}% }% \relax\begin{samepage}% we begin a local group here, using samepage \if #1e\let\do@ptilt\e@pti \else\if #1n\let\do@ptilt\n@pti \else\if #1c\let\do@ptilt\c@pti \else\if #1l\let\do@ptilt\l@pti \else\if #1r\let\do@ptilt\r@pti \else\if #1d\let\do@ptilt\df@ptilt \fi\fi\fi\fi\fi\fi \raggedright % added #14 \parskip=\z@% \reset@font\pltfont% \parindent=\z@% \nopagebreak[4]% \kern-0.8\baselineskip\nopagebreak[4]% \par\noindent \ifx\ptc@rule\relax \begin{tabular}{@{}p{\columnwidth}@{}} {\reset@font\ptifont\do@ptilt{\mtc@v\plttitle}}\\ \end{tabular}\else \begin{tabular}{@{}p{\columnwidth}@{}} {\reset@font\ptifont\do@ptilt{\mtc@v\plttitle}}\\ \@ifundefined{chapter}{\hline}{} \end{tabular}\fi \nopagebreak[4]\null\leavevmode\vrule width \z@ height \z@ depth \z@\\\@BBR% \leftmargin\ptcindent \rightmargin\ptcindent \itemindent=\z@\labelwidth=\z@% \labelsep=\z@\listparindent=\z@% % depth does not matter for partlot \begin{ptc@verse}%\c@tocdepth=\c@parttocdepth% \leavevmode\\\@BBR% this blank line is necessary to avoid % a wild negative indentation \vskip -.5\baselineskip \begingroup \makeatletter \@ifundefined{plt@pgno}% {\let\@dottedtocline\@undottedtocline}{} \@ifundefined{SHORTEXT}% {\def\@tocfile{plt\Thepart}}% % UNIX {\def\@tocfile{U\Thepart}}% % MS-DOS \@input{\jobname.\@tocfile}\if@filesw \fi% \global\@nobreakfalse\endgroup \end{ptc@verse}% \kern0.\baselineskip% \nopagebreak[4]\ptc@rule\null\leavevmode\\% \vskip-1.0\baselineskip \vrule width \z@ height \z@ depth \z@\end{samepage}% %## the \\ is essential \par\@ifundefined{chapter}{\pagebreak[1]\vspace*{-1ex}}% {\cleardoublepage}} % I use a depth of 10000 to inhibit the printing of % that contentsline. \def\l@xpart{\@dottedtocline{\@M}{1.0em}{2.3em}} \def\l@pchapter{\@dottedtocline{1}{1.0em}{2.3em}} \def\pchapter{pchapter} \let\sv@part\@part \def\@part[#1]#2{\sv@part[{#1}]{#2}\relax% \addcontentsline{lof}{xpart}{#1}% \addcontentsline{lot}{xpart}{#1}% } % tricky code to deal with \part* \let\ptc@spart\@spart \def\@spart{% \addtocontents{toc}{\protect\partend}\ptc@spart% } \def\@spart{% \addtocontents{toc}{\protect\partbegin}\ptc@spart% } \let\partend\relax \let\partbegin\relax \let\appendixmtc\relax % this command extracts info from the .toc file % and create the .ptcN files (.ptc -> .P on MS-DOS) \def\@doparttoc#1{{% \makeatletter \setcounter{ptc}{0} % START VALUE \PTC@next#1.toc\relax\\}\setcounter{ptc}{0}} %23; raz % this command extracts info from the .lof file % and create the .plfN files (.plf -> .G on MS-DOS) \def\@dopartlof#1{{% \makeatletter \setcounter{ptc}{0} % START VALUE \PLF@next#1.lof\relax\\}\setcounter{ptc}{0}} %23: raz % this command extracts info from the .lot file % and create the .pltN files (.plt -> .U on MS-DOS) \def\@dopartlot#1{{% \setcounter{ptc}{0} % START VALUE \makeatletter \PLT@next#1.lot\relax\\}\setcounter{ptc}{0}} %23: raz \def\doparttoc{\@ifnextchar[{\doparttoc@}{\doparttoc@[l]}} \def\dopartlof{\@ifnextchar[{\dopartlof@}{\dopartlof@[l]}} \def\dopartlot{\@ifnextchar[{\dopartlot@}{\dopartlot@[l]}} \def\doparttoc@[#1]{% \if #1e\let\df@ptitc\e@pti% \else\if #1n\let\df@ptitc\n@pti% \else\if #1c\let\df@ptitc\c@pti% \else\if #1l\let\df@ptitc\l@pti% \else\if #1r\let\df@ptitc\r@pti% \fi\fi\fi\fi\fi% \@@doparttoc} \def\dopartlof@[#1]{% \if #1e\let\df@ptilf\e@pti% \else\if #1n\let\df@ptilf\n@pti% \else\if #1c\let\df@ptilf\c@pti% \else\if #1l\let\df@ptilf\l@pti% \else\if #1r\let\df@ptilf\r@pti% \fi\fi\fi\fi\fi% \@@dopartlof} \def\dopartlot@[#1]{% \if #1e\let\df@ptilt\e@pti% \else\if #1n\let\df@ptilt\n@pti% \else\if #1c\let\df@ptilt\c@pti% \else\if #1l\let\df@ptilt\l@pti% \else\if #1r\let\df@ptilt\r@pti% \fi\fi\fi\fi\fi% \@@dopartlot} \def\@@doparttoc{\@doparttoc{\jobname}\immediate\closeout\tf@mtc} \def\@@dopartlof{\@dopartlof{\jobname}\immediate\closeout\tf@mtc} \def\@@dopartlot{\@dopartlot{\jobname}\immediate\closeout\tf@mtc} \def\PTC@next#1\relax#2\\{% \edef\PTC@list{#2}% \PTC@loop{#1}} \def\PTC@toc{% \ifx\PTC@list\@empty\else\expandafter\PTC@explist\fi} \def\PTC@contentsline#1#2#3#4{% %%DV: 4 instead of 3 parameters \expandafter% \ifx\csname #1\endcsname\part\relax \stepcounter{ptc}% % the ptc counter simulates the part counter \@ifundefined{SHORTEXT}% {\typeout{Writing\space\jobname.ptc\theptc}% % UNIX \def\ptcname{\jobname.ptc\theptc}}% % UNIX {\typeout{Writing\space\jobname.P\theptc}% % MS-DOS \def\ptcname{\jobname.P\theptc}}% % MS-DOS \immediate\closeout\tf@mtc % close current .ptcN .ptc->.P on MS-DOS \immediate\openout\tf@mtc=\ptcname % open next .ptcN (.ptc->.P if MS-DOS) \fi \expandafter% % extracts and writes info for chapters, sections, etc. \ifx\csname #1\endcsname\chapter\relax \mtc@toks{\noexpand\leavevmode#2}% \edef\@tempa{\immediate\write\tf@mtc {% {\string\reset@font\string\ptcCfont\string\mtc@string% \string\contentsline{#1}% {\noexpand\the\mtc@toks}{\string\reset@font\string\ptcCfont% \space #3}{#4}}}}\@tempa% %%DV: 4 instead of 3 parameters \fi \expandafter% \ifx\csname #1\endcsname\section\relax \mtc@toks{\noexpand\leavevmode#2}% \edef\@tempa{\immediate\write\tf@mtc {% {\string\reset@font\string\ptcSfont\string\mtc@string% \string\contentsline{#1}% {\noexpand\the\mtc@toks}{\string\reset@font\string\ptcSfont% \space #3}{#4}}}}\@tempa% %%DV: 4 instead of 3 parameters \fi \expandafter% \ifx\csname #1\endcsname\subsection\relax \mtc@toks{\noexpand\leavevmode#2}% \edef\@tempa{\immediate\write\tf@mtc {% {\string\reset@font\string\ptcSSfont\string\mtc@string% \string\contentsline{#1}% {\noexpand\the\mtc@toks}{\string\reset@font\string\ptcSSfont% \space #3}{#4}}}}\@tempa% %%DV: 4 instead of 3 parameters \fi \expandafter% \ifx\csname #1\endcsname\subsubsection\relax \mtc@toks{\noexpand \leavevmode#2}% \edef\@tempa{\immediate\write\tf@mtc {% {\string\reset@font\string\ptcSSSfont\string\mtc@string% \string\contentsline{#1}% {\noexpand\the\mtc@toks}{\string\reset@font\string\ptcSSSfont% \space #3}{#4}}}}\@tempa% %%DV: 4 instead of 3 parameters \fi \expandafter% \ifx\csname #1\endcsname\paragraph\relax \mtc@toks{\noexpand\leavevmode#2}% \edef\@tempa{\immediate\write\tf@mtc {% {\string\reset@font\string\ptcPfont\string\mtc@string% \string\contentsline{#1}% {\noexpand\the\mtc@toks}{\string\reset@font\string\ptcPfont% \space #3}{#4}}}}\@tempa% %%DV: 4 instead of 3 parameters \fi \expandafter% \ifx\csname #1\endcsname\subparagraph\relax \mtc@toks{\noexpand\leavevmode#2}% \edef\@tempa{\immediate\write\tf@mtc {% {\string\reset@font\string\ptcSPfont\string\mtc@string% \string\contentsline{#1}% {\noexpand\the\mtc@toks}{\string\reset@font\string\ptcSPfont \space #3}{#4}}}}\@tempa% %%DV: 4 instead of 3 parameters \fi % Added v25: \starchapter & co. \expandafter% % extracts and writes info for chapters, sections, etc. \ifx\csname #1\endcsname\starchapter\relax \mtc@toks{\noexpand\leavevmode#2}% \edef\@tempa{\immediate\write\tf@mtc {% {\string\reset@font\string\ptcCfont\string\mtc@string% \string\contentsline{#1}% {\noexpand\the\mtc@toks}{\string\reset@font\string\ptcCfont% \space #3}{#4}}}}\@tempa% %%DV: 4 instead of 3 parameters \fi \expandafter% \ifx\csname #1\endcsname\starsection\relax \mtc@toks{\noexpand\leavevmode#2}% \edef\@tempa{\immediate\write\tf@mtc {% {\string\reset@font\string\ptcSfont\string\mtc@string% \string\contentsline{#1}% {\noexpand\the\mtc@toks}{\string\reset@font\string\ptcSfont% \space #3}{#4}}}}\@tempa% %%DV: 4 instead of 3 parameters \fi \expandafter% \ifx\csname #1\endcsname\starsubsection\relax \mtc@toks{\noexpand\leavevmode#2}% \edef\@tempa{\immediate\write\tf@mtc {% {\string\reset@font\string\ptcSSfont\string\mtc@string% \string\contentsline{#1}% {\noexpand\the\mtc@toks}{\string\reset@font\string\ptcSSfont% \space #3}{#4}}}}\@tempa% %%DV: 4 instead of 3 parameters \fi \expandafter% \ifx\csname #1\endcsname\starsubsubsection\relax \mtc@toks{\noexpand \leavevmode#2}% \edef\@tempa{\immediate\write\tf@mtc {% {\string\reset@font\string\ptcSSSfont\string\mtc@string% \string\contentsline{#1}% {\noexpand\the\mtc@toks}{\string\reset@font\string\ptcSSSfont% \space #3}{#4}}}}\@tempa% %%DV: 4 instead of 3 parameters \fi \expandafter% \ifx\csname #1\endcsname\starparagraph\relax \mtc@toks{\noexpand\leavevmode#2}% \edef\@tempa{\immediate\write\tf@mtc {% {\string\reset@font\string\ptcPfont\string\mtc@string% \string\contentsline{#1}% {\noexpand\the\mtc@toks}{\string\reset@font\string\ptcPfont% \space #3}{#4}}}}\@tempa% %%DV: 4 instead of 3 parameters \fi \expandafter% \ifx\csname #1\endcsname\starsubparagraph\relax \mtc@toks{\noexpand\leavevmode#2}% \edef\@tempa{\immediate\write\tf@mtc {% {\string\reset@font\string\ptcSPfont\string\mtc@string% \string\contentsline{#1}% {\noexpand\the\mtc@toks}{\string\reset@font\string\ptcSPfont \space #3}{#4}}}}\@tempa% %%DV: 4 instead of 3 parameters \fi } \def\PTC@explist{\expandafter\PTC@next\PTC@list\\} \def\PTC@loop#1{\openin\@inputcheck#1\relax \ifeof\@inputcheck \typeout{^^JNo file #1^^JPARTTOCS NOT PREPARED.^^J}% \expandafter\PTC@toc \else \typeout{PREPARING PARTTOCS FROM #1}% \expandafter\PTC@read\fi} \def\PTC@read{% \read\@inputcheck to\PTC@line \expandafter\PTC@test\PTC@line....\PTC@% }% \long\def\PTC@test#1#2#3#4#5\PTC@{% \ifx#1\contentsline \let\mtc@string\string \PTC@contentsline{#2}{#3}{#4}{\scrubdots#5}% %%DV: 4 instead of 3 params \let\mtc@string\relax \else\ifx#1\@input \edef\PTC@list{\PTC@list#2\relax}% \else\ifx#1\partend % \part* closes .ptcN (.ptc->.P on MS-DOS) \immediate\closeout\tf@mtc \immediate\openout\tf@mtc=\jobname.bmt % and opens a scratch file \else\ifx#1\partbegin \addtocounter{ptc}{-1}% % \part* has done a parasite increment \fi\fi\fi\fi \ifeof\@inputcheck\expandafter\PTC@toc \else\expandafter\PTC@read\fi}% \def\PLF@next#1\relax#2\\{% \edef\PLF@list{#2}% \PLF@loop{#1}} \def\PLF@lof{% \ifx\PLF@list\@empty\else\expandafter\PLF@explist\fi} \def\PLF@contentsline#1#2#3{% \expandafter% \ifx\csname #1\endcsname\xpart\relax \stepcounter{ptc}% % the ptc counter simulates the part counter \@ifundefined{SHORTEXT}% {\typeout{Writing\space\jobname.plf\theptc}% % UNIX \def\plfname{\jobname.plf\theptc}}% % UNIX {\typeout{Writing\space\jobname.G\theptc}% % MS-DOS \def\plfname{\jobname.G\theptc}}% % MS-DOS \immediate\closeout\tf@mtc % close current .plfN .plf->.G on MS-DOS \immediate\openout\tf@mtc=\plfname % open next .plfN (.plf->.G if MS-DOS) \fi \expandafter% % extracts and writes info for sections, etc. \ifx\csname #1\endcsname\figure\relax \mtc@toks{\noexpand\leavevmode#2}% \edef\@tempa{\immediate\write\tf@mtc {% {\string\reset@font\string\plffont\string\mtc@string% \string\contentsline{#1}% {\noexpand\the\mtc@toks}{\string\reset@font\string\plffont% \space #3}}}}\@tempa \fi } \def\PLF@explist{\expandafter\PLF@next\PLF@list\\} \def\PLF@loop#1{\openin\@inputcheck#1\relax \ifeof\@inputcheck \typeout{^^JNo file #1^^JPARTLOFS NOT PREPARED.^^J}% \expandafter\PLF@lof \else \typeout{PREPARING PARTLOFS FROM #1}% \expandafter\PLF@read\fi} \def\PLF@read{% \read\@inputcheck to\PLF@line \expandafter\PLF@test\PLF@line....\PLF@% }% \long\def\PLF@test#1#2#3#4#5\PLF@{% \ifx#1\contentsline \let\mtc@string\string \PLF@contentsline{#2}{#3}{#4}% \let\mtc@string\relax \else\ifx#1\@input \edef\PLF@list{\PLF@list#2\relax}% \else\ifx#1\partend % \part* closes .plfN (.plf->.G on MS-DOS) \immediate\closeout\tf@mtc \immediate\openout\tf@mtc=\jobname.bmt % and opens a scratch file \else\ifx#1\partbegin \addtocounter{ptc}{-1}% % \part* has done a parasite increment \fi\fi\fi\fi \ifeof\@inputcheck\expandafter\PLF@lof \else\expandafter\PLF@read\fi}% \def\PLT@next#1\relax#2\\{% \edef\PLT@list{#2}% \PLT@loop{#1}} \def\PLT@lot{% \ifx\PLT@list\@empty\else\expandafter\PLT@explist\fi} \def\PLT@contentsline#1#2#3{% \expandafter% \ifx\csname #1\endcsname\xpart\relax \stepcounter{ptc}% % the ptc counter simulates the part counter \@ifundefined{SHORTEXT}% {\typeout{Writing\space\jobname.plt\theptc}% % UNIX \def\pltname{\jobname.plt\theptc}}% % UNIX {\typeout{Writing\space\jobname.U\theptc}% % MS-DOS \def\pltname{\jobname.U\theptc}}% % MS-DOS \immediate\closeout\tf@mtc % close current .pltN .plt->.U on MS-DOS \immediate\openout\tf@mtc=\pltname % open next .pltN (.plt->.U if MS-DOS) \fi \expandafter% % extracts and writes info for chapters, sections, etc. \ifx\csname #1\endcsname\table\relax \mtc@toks{\noexpand\leavevmode#2}% \edef\@tempa{\immediate\write\tf@mtc {% {\string\reset@font\string\pltfont\string\mtc@string% \string\contentsline{#1}% {\noexpand\the\mtc@toks}{\string\reset@font\string\pltfont% \space #3}}}}\@tempa \fi } \def\PLT@explist{\expandafter\PLT@next\PLT@list\\} \def\PLT@loop#1{\openin\@inputcheck#1\relax \ifeof\@inputcheck \typeout{^^JNo file #1^^JPARTLOTS NOT PREPARED.^^J}% \expandafter\PLT@lot \else \typeout{PREPARING PARTLOTS FROM #1}% \expandafter\PLT@read\fi} \def\PLT@read{% \read\@inputcheck to\PLT@line \expandafter\PLT@test\PLT@line....\PLT@% }% \long\def\PLT@test#1#2#3#4#5\PLT@{% \ifx#1\contentsline \let\mtc@string\string \PLT@contentsline{#2}{#3}{#4}% \let\mtc@string\relax \else\ifx#1\@input \edef\PLT@list{\PLT@list#2\relax}% \else\ifx#1\partend % \part* closes .pltN (.plt->.U on MS-DOS) \immediate\closeout\tf@mtc \immediate\openout\tf@mtc=\jobname.bmt % and opens a scratch file \else\ifx#1\partbegin \addtocounter{ptc}{-1}% % \part* has done a parasite increment \fi\fi\fi\fi \ifeof\@inputcheck\expandafter\PLT@lot \else\expandafter\PLT@read\fi}% } % end of part stuff %%%%%%%%%%%%%%%%%%%%%%% %%% If \chapter is not defined but \section is, then %%% the following macros are available (for article-like documents). %%% Braces are inscrutable! \@ifundefined{chapter}% {\@ifundefined{section}{}{% \def\firstsectionis#1% {\typeout{^^JWARNING*** \string\firstsectionis}% \typeout{ is an obsolete command^^J}} \newcounter{stc} % counter of secttocs \setcounter{stc}{0} \newcounter{secttocdepth} % analog to tocdepth, but for secttocs \setcounter{secttocdepth}{2} % rule before/after secttoc/sectlof/sectlot \def\stc@rule{\kern-3\p@% \hrule width \columnwidth \kern2.6\p@} % the \hrule is .4pt high \newlength\stcindent % indentation (left/right) of secttocs \stcindent=24pt % defaut value \def\stcfont{\small\rm} % font for the secttoc \def\stcSSfont{\normalsize\bf} % font for the secttoc (subsections) \def\stcSSSfont{\stcfont} % font for the secttoc (subsubsections) \def\stcPfont{\stcfont} % font for the secttoc (paragraphs) \def\stcSPfont{\stcfont} % font for the secttoc (subparagraphs) \def\slffont{\stcfont} % font for the sectlof (figures) \def\sltfont{\stcfont} % font for the sectlot (tables) \def\stifont{\Large\bf} % font for titles % Centering, flushleft, flushright or empty titles. \def\c@sti#1{\null\hfill #1\hfill\null} \def\l@sti#1{\null #1\hfill\null} \def\r@sti#1{\null\hfill #1\null} \def\e@sti#1{\relax} \def\n@sti#1{\relax} % Default: titles on left \let\do@stitc\l@sti \let\df@stitc\l@sti \let\do@stilf\l@sti \let\df@stilf\l@sti \let\do@stilt\l@sti \let\df@stilt\l@sti %v27 % Language dependent names: default values %v27 \@ifundefined{stctitle}{\def\stctitle{Contents}}{\relax} %v27 \@ifundefined{slftitle}{\def\slftitle{Figures}}{\relax} %v27 \@ifundefined{slttitle}{\def\slttitle{Tables}}{\relax} \def\stc@verse{\let\\=\@centercr \list{}{\itemsep\z@\itemindent \z@\listparindent \itemindent \leftmargin\stcindent \rightmargin\leftmargin}\item[]} \def\endstc@verse{\nopagebreak[4]\endlist} % this command must be used after \section % if you need a secttoc (no automatic secttoc) \def\secttoc{\@ifnextchar[{\secttoc@}{\secttoc@[d]}} \def\secttoc@[#1]{% \relax\begin{samepage}% we begin a local group here, using samepage \if #1e\let\do@stitc\e@sti \else\if #1n\let\do@stitc\n@sti \else\if #1c\let\do@stitc\c@sti \else\if #1l\let\do@stitc\l@sti \else\if #1r\let\do@stitc\r@sti \else\if #1d\let\do@stitc\df@stitc \fi\fi\fi\fi\fi\fi \raggedright % added #14 \parskip=\z@% \reset@font\stcfont% \parindent=\z@% \nopagebreak[4]% \kern-0.8\baselineskip\nopagebreak[4]% \par\noindent \ifx\stc@rule\relax \begin{tabular}{@{}p{\columnwidth}@{}} {\reset@font\stifont\do@stitc{\mtc@v\stctitle}}\\ \end{tabular}\else \begin{tabular}{@{}p{\columnwidth}@{}} {\reset@font\stifont\do@stitc{\mtc@v\stctitle}}\\\hline \end{tabular}\fi \nopagebreak[4]\null\leavevmode\vrule width \z@ height \z@ depth \z@\\\@BBR% \leftmargin\stcindent \rightmargin\stcindent \itemindent=\z@\labelwidth=\z@% \labelsep=\z@\listparindent=\z@% \begin{stc@verse}\c@tocdepth=\c@secttocdepth% \leavevmode\\\@BBR% this blank line is necessary to avoid % a wild negative indentation \vskip -.5\baselineskip \begingroup \makeatletter \@ifundefined{stc@pgno}% {\let\@dottedtocline\@undottedtocline}{} \gdef\thestc{\arabic{stc}} %23 \@ifundefined{SHORTEXT}% {\def\@tocfile{stc\thestc}}% % UNIX {\def\@tocfile{S\thestc}}% % MS-DOS \@input{\jobname.\@tocfile}\if@filesw \fi% \global\@nobreakfalse\endgroup \end{stc@verse}% \kern0.\baselineskip% \nopagebreak[4]\stc@rule\null\leavevmode\\% \vskip-1.0\baselineskip \vrule width \z@ height \z@ depth \z@\end{samepage}% %## the \\ is essential \par\pagebreak[1]\vspace*{-1ex}}% % some space under the secttoc % this command must be used after \section % if you need a sectlof (no automatic sectlof) \def\sectlof{\@ifnextchar[{\sectlof@}{\sectlof@[d]}} \def\sectlof@[#1]{% \relax\begin{samepage}% we begin a local group here, using samepage \if #1e\let\do@stilf\e@sti \else\if #1n\let\do@stilf\n@sti \else\if #1c\let\do@stilf\c@sti \else\if #1l\let\do@stilf\l@sti \else\if #1r\let\do@stilf\r@sti \else\if #1d\let\do@stilf\df@stilf \fi\fi\fi\fi\fi\fi \raggedright % added #14 \parskip=\z@% \reset@font\slffont% \parindent=\z@% \nopagebreak[4]% \kern-0.8\baselineskip\nopagebreak[4]% \par\noindent \ifx\stc@rule\relax % correction 07Nov94 v23 \begin{tabular}{@{}p{\columnwidth}@{}} {\reset@font\stifont\do@stilf{\mtc@v\slftitle}}\\ \end{tabular}\else \begin{tabular}{@{}p{\columnwidth}@{}} {\reset@font\stifont\do@stilf{\mtc@v\slftitle}}\\\hline \end{tabular}\fi \nopagebreak[4]\null\leavevmode\vrule width \z@ height \z@ depth \z@\\\@BBR% \leftmargin\stcindent \rightmargin\stcindent \itemindent=\z@\labelwidth=\z@% \labelsep=\z@\listparindent=\z@% % depth does not matter for sectlof \begin{stc@verse}%\c@tocdepth=\c@secttocdepth% \leavevmode\\\@BBR% this blank line is necessary to avoid % a wild negative indentation \vskip -.5\baselineskip \begingroup \makeatletter \@ifundefined{slf@pgno}% {\let\@dottedtocline\@undottedtocline}{} \gdef\thestc{\arabic{stc}} %23 \@ifundefined{SHORTEXT}% {\def\@tocfile{slf\thestc}}% % UNIX {\def\@tocfile{H\thestc}}% % MS-DOS \@input{\jobname.\@tocfile}\if@filesw \fi% \global\@nobreakfalse\endgroup \end{stc@verse}% \kern0.\baselineskip% \nopagebreak[4]\stc@rule\null\leavevmode\\% \vskip-1.0\baselineskip \vrule width \z@ height \z@ depth \z@\end{samepage}% %## the \\ is essential \par\pagebreak[1]\vspace*{-1ex}}% % some space under the secttoc % Added in version #13 % this command must be used after \section % if you need a sectlot (no automatic sectlot) \def\sectlot{\@ifnextchar[{\sectlot@}{\sectlot@[d]}} \def\sectlot@[#1]{% \relax\begin{samepage}% we begin a local group here, using samepage \if #1e\let\do@stilt\e@sti \else\if #1n\let\do@stilt\n@sti \else\if #1c\let\do@stilt\c@sti \else\if #1l\let\do@stilt\l@sti \else\if #1r\let\do@stilt\r@sti \else\if #1d\let\do@stilt\df@stilt \fi\fi\fi\fi\fi\fi \raggedright % added #14 \parskip=\z@% \reset@font\sltfont% \parindent=\z@% \nopagebreak[4]% \kern-0.8\baselineskip\nopagebreak[4]% \par\noindent \ifx\stc@rule\relax \begin{tabular}{@{}p{\columnwidth}@{}} {\reset@font\stifont\do@stilt{\mtc@v\slttitle}}\\ \end{tabular}\else \begin{tabular}{@{}p{\columnwidth}@{}} {\reset@font\stifont\do@stilt{\mtc@v\slttitle}}\\\hline \end{tabular}\fi \nopagebreak[4]\null\leavevmode\vrule width \z@ height \z@ depth \z@\\\@BBR% \leftmargin\stcindent \rightmargin\stcindent \itemindent=\z@\labelwidth=\z@% \labelsep=\z@\listparindent=\z@% % depth does not matter for sectlot \begin{stc@verse}%\c@tocdepth=\c@secttocdepth% \leavevmode\\\@BBR% this blank line is necessary to avoid % a wild negative indentation \vskip -.5\baselineskip \begingroup \makeatletter \@ifundefined{slt@pgno}% {\let\@dottedtocline\@undottedtocline}{} \gdef\thestc{\arabic{stc}} \@ifundefined{SHORTEXT}% {\def\@tocfile{slt\thestc}}% % UNIX {\def\@tocfile{V\thestc}}% % MS-DOS \@input{\jobname.\@tocfile}\if@filesw \fi% \global\@nobreakfalse\endgroup \end{stc@verse}% \kern0.\baselineskip% \nopagebreak[4]\stc@rule\null\leavevmode\\% \vskip-1.0\baselineskip \vrule width \z@ height \z@ depth \z@\end{samepage}% %## the \\ is essential \par\pagebreak[1]\vspace*{-1ex}}% % some space under the secttoc % I use a depth of 10000 to inhibit the printing of % that contentsline. \def\l@xsect{\@dottedtocline{\@M}{1.0em}{2.3em}} \def\l@schapter{\@dottedtocline{1}{1.0em}{2.3em}} \def\xsect{xsect} \def\schapter{schapter} \let\sv@sect\@sect \gdef\@sect#1#2#3#4#5#6[#7]#8{% \ifnum #2=1 \addcontentsline{lof}{xsect}{#7}% \addcontentsline{lot}{xsect}{#7}% \fi \sv@sect{#1}{#2}{#3}{#4}{#4}{#5}{#6}[{#7}]{#8}} \def\@sect#1#2#3#4#5#6[#7]#8{ \expandafter \ifx\csname #1\endcsname\section\relax % ADDED \addcontentsline{lof}{xsect}{#7}% ADDED \addcontentsline{lot}{xsect}{#7}% ADDED \fi % ADDED \ifx\csname #1\endcsname\starsection\relax % ADDED v25 \addcontentsline{lof}{xsect}{#7}% ADDED v25 \addcontentsline{lot}{xsect}{#7}% ADDED v25 \fi % ADDED v25 \ifnum #2>\c@secnumdepth \let\@svsec\@empty\else \refstepcounter{#1}\edef\@svsec{\csname the#1\endcsname\hskip 1em}\fi \@tempskipa #5\relax \ifdim \@tempskipa>\z@ \begingroup #6\relax \@hangfrom{\hskip #3\relax\@svsec}{\interlinepenalty \@M #8\par}% \endgroup \csname #1mark\endcsname{#7}\addcontentsline {toc}{#1}{\ifnum #2>\c@secnumdepth \else \protect\numberline{\csname the#1\endcsname}\fi #7}\else \def\@svsechd{#6\hskip #3\relax %% \relax added 2 May 90 \@svsec #8\csname #1mark\endcsname {#7}\addcontentsline {toc}{#1}{\ifnum #2>\c@secnumdepth \else \protect\numberline{\csname the#1\endcsname}\fi #7}}\fi \@xsect{#5}} % tricky code to deal with \section* \let\stc@ssect\@ssect \def\@ssect{% \addtocontents{toc}{\protect\sectend}\stc@ssect% } \def\@ssect{% \addtocontents{toc}{\protect\sectbegin}\stc@ssect% } \let\sectend\relax \let\sectbegin\relax \let\appendixmtc\relax % this command extracts info from the .toc file % and create the .stcN files (.stc -> .S on MS-DOS) \def\@dosecttoc#1{{% \makeatletter \setcounter{stc}{0} % START VALUE \STC@next#1.toc\relax\\}\setcounter{stc}{0}} %23: raz % this command extracts info from the .lof file % and create the .slfN files (.slf -> .H on MS-DOS) \def\@dosectlof#1{{% \makeatletter \setcounter{stc}{0} % START VALUE \SLF@next#1.lof\relax\\}\setcounter{stc}{0}} %23: raz % this command extracts info from the .lot file % and create the .sltN files (.slt -> .V on MS-DOS) \def\@dosectlot#1{{% \setcounter{stc}{0} % START VALUE \makeatletter \SLT@next#1.lot\relax\\}\setcounter{stc}{0}} %23: raz \def\dosecttoc{\@ifnextchar[{\dosecttoc@}{\dosecttoc@[l]}} \def\dosectlof{\@ifnextchar[{\dosectlof@}{\dosectlof@[l]}} \def\dosectlot{\@ifnextchar[{\dosectlot@}{\dosectlot@[l]}} \def\dosecttoc@[#1]{% \if #1e\let\df@stitc\e@sti% \else\if #1n\let\df@stitc\n@sti% \else\if #1c\let\df@stitc\c@sti% \else\if #1l\let\df@stitc\l@sti% \else\if #1r\let\df@stitc\r@sti% \fi\fi\fi\fi\fi% \@@dosecttoc} \def\dosectlof@[#1]{% \if #1e\let\df@stilf\e@sti% \else\if #1n\let\df@stilf\n@sti% \else\if #1c\let\df@stilf\c@sti% \else\if #1l\let\df@stilf\l@sti% \else\if #1r\let\df@stilf\r@sti% \fi\fi\fi\fi\fi% \@@dosectlof} \def\dosectlot@[#1]{% \if #1e\let\df@stilt\e@sti% \else\if #1n\let\df@stilt\n@sti% \else\if #1c\let\df@stilt\c@sti% \else\if #1l\let\df@stilt\l@sti% \else\if #1r\let\df@stilt\r@sti% \fi\fi\fi\fi\fi% \@@dosectlot} \def\@@dosecttoc{\@dosecttoc{\jobname}\immediate\closeout\tf@mtc} \def\@@dosectlof{\@dosectlof{\jobname}\immediate\closeout\tf@mtc} \def\@@dosectlot{\@dosectlot{\jobname}\immediate\closeout\tf@mtc} \def\STC@next#1\relax#2\\{% \edef\STC@list{#2}% \STC@loop{#1}} \def\STC@toc{% \ifx\STC@list\@empty\else\expandafter\STC@explist\fi} \def\STC@contentsline#1#2#3{% \gdef\thestc{\arabic{stc}} \expandafter% \ifx\csname #1\endcsname\section\relax \stepcounter{stc}% % the stc counter simulates the section counter \gdef\thestc{\arabic{stc}} \@ifundefined{SHORTEXT}% {\typeout{Writing\space\jobname.stc\thestc}% % UNIX \def\stcname{\jobname.stc\thestc}}% % UNIX {\typeout{Writing\space\jobname.S\thestc}% % MS-DOS \def\stcname{\jobname.S\thestc}}% % MS-DOS \immediate\closeout\tf@mtc % close current .stcN .stc->.S on MS-DOS \immediate\openout\tf@mtc=\stcname % open next .stcN (.stc->.S if MS-DOS) \fi \expandafter% \ifx\csname #1\endcsname\subsection\relax \mtc@toks{\noexpand\leavevmode#2}% \edef\@tempa{\immediate\write\tf@mtc {% {\string\reset@font\string\stcSSfont\string\mtc@string% \string\contentsline{#1}% {\noexpand\the\mtc@toks}{\string\reset@font\string\stcSSfont% \space #3}}}}\@tempa \fi \expandafter% \ifx\csname #1\endcsname\subsubsection\relax \mtc@toks{\noexpand \leavevmode#2}% \edef\@tempa{\immediate\write\tf@mtc {% {\string\reset@font\string\stcSSSfont\string\mtc@string% \string\contentsline{#1}% {\noexpand\the\mtc@toks}{\string\reset@font\string\stcSSSfont% \space #3}}}}\@tempa \fi \expandafter% \ifx\csname #1\endcsname\paragraph\relax \mtc@toks{\noexpand\leavevmode#2}% \edef\@tempa{\immediate\write\tf@mtc {% {\string\reset@font\string\stcPfont\string\mtc@string% \string\contentsline{#1}% {\noexpand\the\mtc@toks}{\string\reset@font\string\stcPfont% \space #3}}}}\@tempa \fi \expandafter% \ifx\csname #1\endcsname\subparagraph\relax \mtc@toks{\noexpand\leavevmode#2}% \edef\@tempa{\immediate\write\tf@mtc {% {\string\reset@font\string\stcSPfont\string\mtc@string% \string\contentsline{#1}% {\noexpand\the\mtc@toks}{\string\reset@font\string\stcSPfont \space #3}}}}\@tempa \fi % Added v25: \starsection and co. \ifx\csname #1\endcsname\starsection\relax \stepcounter{stc}% % the stc counter simulates the section counter \gdef\thestc{\arabic{stc}} \@ifundefined{SHORTEXT}% {\typeout{Writing\space\jobname.stc\thestc}% % UNIX \def\stcname{\jobname.stc\thestc}}% % UNIX {\typeout{Writing\space\jobname.S\thestc}% % MS-DOS \def\stcname{\jobname.S\thestc}}% % MS-DOS \immediate\closeout\tf@mtc % close current .stcN .stc->.S on MS-DOS \immediate\openout\tf@mtc=\stcname % open next .stcN (.stc->.S if MS-DOS) \fi \expandafter% \ifx\csname #1\endcsname\starsubsection\relax \mtc@toks{\noexpand\leavevmode#2}% \edef\@tempa{\immediate\write\tf@mtc {% {\string\reset@font\string\stcSSfont\string\mtc@string% \string\contentsline{#1}% {\noexpand\the\mtc@toks}{\string\reset@font\string\stcSSfont% \space #3}}}}\@tempa \fi \expandafter% \ifx\csname #1\endcsname\starsubsubsection\relax \mtc@toks{\noexpand \leavevmode#2}% \edef\@tempa{\immediate\write\tf@mtc {% {\string\reset@font\string\stcSSSfont\string\mtc@string% \string\contentsline{#1}% {\noexpand\the\mtc@toks}{\string\reset@font\string\stcSSSfont% \space #3}}}}\@tempa \fi \expandafter% \ifx\csname #1\endcsname\starparagraph\relax \mtc@toks{\noexpand\leavevmode#2}% \edef\@tempa{\immediate\write\tf@mtc {% {\string\reset@font\string\stcPfont\string\mtc@string% \string\contentsline{#1}% {\noexpand\the\mtc@toks}{\string\reset@font\string\stcPfont% \space #3}}}}\@tempa \fi \expandafter% \ifx\csname #1\endcsname\starsubparagraph\relax \mtc@toks{\noexpand\leavevmode#2}% \edef\@tempa{\immediate\write\tf@mtc {% {\string\reset@font\string\stcSPfont\string\mtc@string% \string\contentsline{#1}% {\noexpand\the\mtc@toks}{\string\reset@font\string\stcSPfont \space #3}}}}\@tempa \fi } \def\STC@explist{\expandafter\STC@next\STC@list\\} \def\STC@loop#1{\openin\@inputcheck#1\relax \ifeof\@inputcheck \typeout{^^JNo file #1^^JSECTTOCS NOT PREPARED.^^J}% \expandafter\STC@toc \else \typeout{PREPARING SECTTOCS FROM #1}% \expandafter\STC@read\fi} \def\STC@read{% \read\@inputcheck to\STC@line \expandafter\STC@test\STC@line....\STC@% }% \long\def\STC@test#1#2#3#4#5\STC@{% \ifx#1\contentsline \let\mtc@string\string \STC@contentsline{#2}{#3}{#4}% \let\mtc@string\relax \else\ifx#1\@input \edef\STC@list{\STC@list#2\relax}% \else\ifx#1\sectend % \section* closes .stcN (.stc->.S on MS-DOS) \immediate\closeout\tf@mtc \immediate\openout\tf@mtc=\jobname.bmt % and opens a scratch file \else\ifx#1\sectbegin \addtocounter{stc}{-1}% % \section* has done a parasite increment \fi\fi\fi\fi \ifeof\@inputcheck\expandafter\STC@toc \else\expandafter\STC@read\fi}% \def\SLF@next#1\relax#2\\{% \edef\SLF@list{#2}% \SLF@loop{#1}} \def\SLF@lof{% \ifx\SLF@list\@empty\else\expandafter\SLF@explist\fi} \def\SLF@contentsline#1#2#3{% \gdef\thestc{\arabic{stc}} \expandafter% \ifx\csname #1\endcsname\xsect\relax \stepcounter{stc}% % the stc counter simulates the section counter \gdef\thestc{\arabic{stc}} \@ifundefined{SHORTEXT}% {\typeout{Writing\space\jobname.slf\thestc}% % UNIX \def\slfname{\jobname.slf\thestc}}% % UNIX {\typeout{Writing\space\jobname.G\thestc}% % MS-DOS \def\slfname{\jobname.H\thestc}}% % MS-DOS \immediate\closeout\tf@mtc % close current .slfN .slf->.H on MS-DOS \immediate\openout\tf@mtc=\slfname % open next .slfN (.slf->.H if MS-DOS) \fi \expandafter% % extracts and writes info for sections, etc. \ifx\csname #1\endcsname\figure\relax \mtc@toks{\noexpand\leavevmode#2}% \edef\@tempa{\immediate\write\tf@mtc {% {\string\reset@font\string\slffont\string\mtc@string% \string\contentsline{#1}% {\noexpand\the\mtc@toks}{\string\reset@font\string\slffont% \space #3}}}}\@tempa \fi } \def\SLF@explist{\expandafter\SLF@next\SLF@list\\} \def\SLF@loop#1{\openin\@inputcheck#1\relax \ifeof\@inputcheck \typeout{^^JNo file #1^^JSECTLOFS NOT PREPARED.^^J}% \expandafter\SLF@lof \else \typeout{PREPARING SECTLOFS FROM #1}% \expandafter\SLF@read\fi} \def\SLF@read{% \read\@inputcheck to\SLF@line \expandafter\SLF@test\SLF@line....\SLF@% }% \long\def\SLF@test#1#2#3#4#5\SLF@{% \ifx#1\contentsline \let\mtc@string\string \SLF@contentsline{#2}{#3}{#4}% \let\mtc@string\relax \else\ifx#1\@input \edef\SLF@list{\SLF@list#2\relax}% \else\ifx#1\sectend % \section* closes .slfN (.slf->.H on MS-DOS) \immediate\closeout\tf@mtc \immediate\openout\tf@mtc=\jobname.bmt % and opens a scratch file \else\ifx#1\sectbegin \addtocounter{stc}{-1}% % \section* has done a parasite increment \fi\fi\fi\fi \ifeof\@inputcheck\expandafter\SLF@lof \else\expandafter\SLF@read\fi}% \def\SLT@next#1\relax#2\\{% \edef\SLT@list{#2}% \SLT@loop{#1}} \def\SLT@lot{% \ifx\SLT@list\@empty\else\expandafter\SLT@explist\fi} \def\SLT@contentsline#1#2#3{% \gdef\thestc{\arabic{stc}} \expandafter% \ifx\csname #1\endcsname\xsect\relax \stepcounter{stc}% % the stc counter simulates the section counter \gdef\thestc{\arabic{stc}} \@ifundefined{SHORTEXT}% {\typeout{Writing\space\jobname.slt\thestc}% % UNIX \def\mltname{\jobname.slt\thestc}}% % UNIX {\typeout{Writing\space\jobname.V\thestc}% % MS-DOS \def\sltname{\jobname.V\thestc}}% % MS-DOS \immediate\closeout\tf@mtc % close current .sltN .slt->.V on MS-DOS \immediate\openout\tf@mtc=\sltname % open next .sltN (.slt->.V if MS-DOS) \fi \expandafter% % extracts and writes info for subsections, etc. \ifx\csname #1\endcsname\table\relax \mtc@toks{\noexpand\leavevmode#2}% \edef\@tempa{\immediate\write\tf@mtc {% {\string\reset@font\string\sltfont\string\mtc@string% \string\contentsline{#1}% {\noexpand\the\mtc@toks}{\string\reset@font\string\sltfont% \space #3}}}}\@tempa \fi } \def\SLT@explist{\expandafter\SLT@next\SLT@list\\} \def\SLT@loop#1{\openin\@inputcheck#1\relax \ifeof\@inputcheck \typeout{^^JNo file #1^^JSECTLOTS NOT PREPARED.^^J}% \expandafter\SLT@lot \else \typeout{PREPARING SECTLOTS FROM #1}% \expandafter\SLT@read\fi} \def\SLT@read{% \read\@inputcheck to\SLT@line \expandafter\SLT@test\SLT@line....\SLT@% }% \long\def\SLT@test#1#2#3#4#5\SLT@{% \ifx#1\contentsline \let\mtc@string\string \SLT@contentsline{#2}{#3}{#4}% \let\mtc@string\relax \else\ifx#1\@input \edef\SLT@list{\SLT@list#2\relax}% \else\ifx#1\sectend % \section* closes .sltN (.slt->.V on MS-DOS) \immediate\closeout\tf@mtc \immediate\openout\tf@mtc=\jobname.bmt % and opens a scratch file \else\ifx#1\sectbegin \addtocounter{stc}{-1}% % \section* has done a parasite increment \fi\fi\fi\fi \ifeof\@inputcheck\expandafter\SLT@lot \else\expandafter\SLT@read\fi}% }}{} \@ifundefined{section}{}{\let\l@listof\l@section} %v27 \@ifundefined{chapter}{}{\let\l@listof\l@chapter} %v27 \@ifundefined{part}{}{\let\l@starpart\l@part} \@ifundefined{chapter}{}{\let\l@starchapter\l@chapter} \@ifundefined{section}{}{\let\l@starsection\l@section} \@ifundefined{subsection}{}{\let\l@starsubsection\l@subsection} \@ifundefined{subsubsection}{}{\let\l@starsubsubsection\l@subsubsection} \@ifundefined{paragraph}{}{\let\l@starparagraph\l@paragraph} \@ifundefined{subparagraph}{}{\let\l@starsubparagraph\l@subparagraph} \def\noptcrule{\let\ptc@rule\relax} \def\nomtcrule{\let\mtc@rule\relax} \def\nostcrule{\let\stc@rule\relax} \def\ptcrule{\def\ptc@rule{\kern-3\p@% \hrule width \columnwidth \kern2.6\p@}} % the \hrule is .4pt high \def\mtcrule{\def\mtc@rule{\kern-3\p@% \hrule width \columnwidth \kern2.6\p@}} % the \hrule is .4pt high \def\stcrule{\def\stc@rule{\kern-3\p@% \hrule width \columnwidth \kern2.6\p@}} % the \hrule is .4pt high %%%% Language dependent part \DeclareOption{american}{\input{english.mld}} \DeclareOption{austrian}{\input{german.mld}} \DeclareOption{brazil}{\input{portuges.mld}} \DeclareOption{breton}{\input{breton.mld}} %v26 \DeclareOption{catalan}{\input{catalan.mld}} \DeclareOption{croatian}{\input{croatian.mld}} \DeclareOption{czech}{\input{czech.mld}} \DeclareOption{danish}{\input{danish.mld}} \DeclareOption{dutch}{\input{dutch.mld}} \DeclareOption{english}{\input{english.mld}} \DeclareOption{esperant}{\input{esperant.mld}} %v26 \DeclareOption{esperanto}{\input{esperant.mld}} %v26 \DeclareOption{finnish}{\input{finnish.mld}} \DeclareOption{francais}{\input{french.mld}} \DeclareOption{french}{\input{french.mld}} \DeclareOption{galician}{\input{galician.mld}} \DeclareOption{german}{\input{german.mld}} \DeclareOption{germanb}{\input{germanb.mld}} %v26 \DeclareOption{greek}{\input{greek.mld}} %v26 \DeclareOption{hungarian}{\input{magyar.mld}} \DeclareOption{irish}{\input{irish.mld}} %v26 \DeclareOption{italian}{\input{italian.mld}} \DeclareOption{lsorbian}{\input{lsorbian.mld}} %v26 \DeclareOption{magyar}{\input{magyar.mld}} \DeclareOption{norsk}{\input{norsk.mld}} \DeclareOption{nynorsk}{\input{nynorsk.mld}} %v25 \DeclareOption{polish}{\input{polish.mld}} \DeclareOption{portuges}{\input{portuges.mld}} \DeclareOption{romanian}{\input{romanian.mld}} %%%%russian not supported \DeclareOption{russian}{\input{russian.mld}} \DeclareOption{russianb}{\input{russianb.mld}} %v26 \DeclareOption{scottish}{\input{scottish.mld}} %v26 \DeclareOption{slovak}{\input{slovak.mld}} \DeclareOption{slovene}{\input{slovene.mld}} \DeclareOption{spanish}{\input{spanish.mld}} \DeclareOption{swedish}{\input{swedish.mld}} \DeclareOption{turkish}{\input{turkish.mld}} \DeclareOption{usorbian}{\input{usorbian.mld}} %v26 \DeclareOption{vietnam}{\input{vietnam.mld}} %v27 \DeclareOption{vietnamese}{\input{vietnam.mld}} %v27 \DeclareOption{arab}{\input{arab.mld}} %v27 \DeclareOption{arabic}{\input{arab.mld}} %v27 \ExecuteOptions{english} %v27 % default \ProcessOptions* %%\languagespecific{russian.dtx} %% %% \CharacterTable %% {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z %% Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z %% Digits \0\1\2\3\4\5\6\7\8\9 %% Exclamation \! Double quote \" Hash (number) \# %% Dollar \$ Percent \% Ampersand \& %% Acute accent \' Left paren \( Right paren \) %% Asterisk \* Plus \+ Comma \, %% Minus \- Point \. Solidus \/ %% Colon \: Semicolon \; Less than \< %% Equals \= Greater than \> Question mark \? %% Commercial at \@ Left bracket \[ Backslash \\ %% Right bracket \] Circumflex \^ Underscore \_ %% Grave accent \` Left brace \{ Vertical bar \| %% Right brace \} Tilde \~} \endinput %% %% End of file `minitoc.sty'.