% \iffalse meta-comment % % This is file `caption.dtx'. % % Copyright (C) 1994-2020 Axel Sommerfeldt (axel.sommerfeldt@f-m.fm) % % -------------------------------------------------------------------------- % % This work may be distributed and/or modified under the % conditions of the LaTeX Project Public License, either version 1.3 % of this license or (at your option) any later version. % The latest version of this license is in % http://www.latex-project.org/lppl.txt % and version 1.3 or later is part of all distributions of LaTeX % version 2003/12/01 or later. % % This work has the LPPL maintenance status "maintained". % % This Current Maintainer of this work is Axel Sommerfeldt. % % This work consists of the files % caption.ins, caption.dtx, caption-light.dtx, caption2.dtx, caption3.dtx, % caption-ams-smf.dtx, caption-beamer.dtx, caption-elsarticle.dtx, % caption-koma.dtx, caption-memoir.dtx, caption-ntg.dtx, % caption-thesis.dtx, bicaption.dtx, ltcaption.dtx, subcaption.dtx, % the derived files % caption.sty, caption-light.sty, caption2.sty, caption3.sty, % caption-ams-smf.sto, caption-beamer.sto, caption-elsarticle.sto, % caption-koma.sto, caption-memoir.sto, caption-ntg.sto, % caption-thesis.sto, bicaption.sty, ltcaption.sty, subcaption.sty, % and the user manuals % caption-deu.tex, caption-eng.tex, caption-rus.tex. % % \fi % \CheckSum{2692} % % \iffalse %<*driver> \NeedsTeXFormat{LaTeX2e}[1994/12/01] \ProvidesFile{caption.drv}[2020/10/11 v3.5 Implementation of the caption package] \hbadness=9999 \newcount\hbadness \hfuzz=100pt % Make TeX shut up. %\errorcontextlines=3 % \documentclass{ltxdoc} \setlength\parindent{0pt} \setlength\parskip{\smallskipamount} % \makeatletter % make room for subsections like 2.16.14 in the TOC %\newcommand*\l@subsection{\@dottedtocline{2}{1.5em}{2.3em}} \renewcommand*\l@subsection{\@dottedtocline{2}{1.5em}{2.7em}} \makeatother % \usepackage{ifpdf} \ifpdf \usepackage{mathptmx,courier} \usepackage[scaled=0.90]{helvet} \addtolength\marginparwidth{15pt} \fi % \usepackage{hypdoc} \ifpdf\usepackage{hypdestopt}\fi \hypersetup{pdfkeywords={LaTeX, package, caption},pdfstartpage={},pdfstartview={}} % \usepackage[debug]{caption}[2013/01/01] % \DeclareRobustCommand*\eTeX{\texorpdfstring {\leavevmode\hbox{$\varepsilon$}-\TeX}% {e-TeX}} % \begin{document} \DocInput{caption.dtx} \end{document} % % \fi % % \newcommand*\purerm[1]{\texorpdfstring{{\upshape\mdseries\rmfamily #1}}{#1}} % \newcommand*\puresf[1]{\texorpdfstring{{\upshape\mdseries\sffamily #1}}{#1}} % \newcommand*\purett[1]{\texorpdfstring{{\upshape\mdseries\ttfamily #1}}{#1}} % \let\class\puresf \let\package\puresf % \let\env\purett \let\opt\purett % % \def\thispackage{the \package{caption} package} % \def\Thispackage{The \package{caption} package} % % \newcommand*\csmarg[1]{\texttt{\char`\{#1\char`\}}} % \newcommand*\csoarg[1]{\texttt{\char`\[#1\char`\]}} % \newcommand*\version[2][]{v$#2$} % % \newcommand*\issue[1]{GitLab~\##1} % % \GetFileInfo{caption.drv} % \let\docdate\filedate % \let\docversion\fileversion % \GetFileInfo{caption.sty} % % \title{The Implementation of % \texorpdfstring{\thispackage\thanks{%^^A % This package has version number \docversion.}}%^^A % {the caption package}} % \author{Axel Sommerfeldt\\ % \url{https://gitlab.com/axelsommerfeldt/caption}} % \date{\docdate} % \maketitle % % \begin{abstract} % \Thispackage\ consists of two parts -- the kernel % (|caption3.sty|) and the main package (|caption.sty|). % % \Thispackage\ redefines the \LaTeX\ commands % |\caption|, |\@caption|, and |\@makecaption| and maps the latter one to % |\caption@@make|, giving the user the possibility to control the look \& feel % of the captions from floating environments like |figure| and |table|. % Furthermore it does similar to the caption stuff coming from other packages % (like the \package{longtable} or \package{supertabular} package): % Mapping the appropriate internal commands (like |\LT@makecaption| or % |\ST@caption|) to the ones offered by the \package{caption3} kernel. % So you can think of \thispackage\ as a layer package, it % simply provides adaptation layers between the caption stuff coming from % \LaTeXe\ or packages, and the caption stuff offered by the % \package{caption3} kernel. % \end{abstract} % % \section*{User manual} % % This document is describing the code implementation only. % The user documentation can be found in % \nopagebreak\begin{quote} % \begin{tabular}{ll} % \href{http://mirror.ctan.org/macros/latex/contrib/caption/caption-eng.pdf}% % {\texttt{caption-eng.pdf}} & The English documentation \\ % \href{http://mirror.ctan.org/macros/latex/contrib/caption/caption-rus.pdf}% % {\texttt{caption-rus.pdf}} & The Russian documentation\footnotemark \\ % \href{http://mirror.ctan.org/macros/latex/contrib/caption/caption-deu.pdf}% % {\texttt{caption-deu.pdf}} & The German documentation \\ % \end{tabular} % \footnotetext{Thanks a lot to Olga Lapko for this translation} % \end{quote} % % \pagebreak[4] % \section*{Internal commands} % % These internal commands are save to use by other packages as well % since their interface will not change in future releases: % \begin{quote}\begin{tabular}{ll} % Internal command & Currently used by \\ % \hline % |\caption@kernel@addcontentsline| & \package{floatrow} \\ % |\caption@makecaption| & \package{bidi} \\ % |\caption@settype| & \package{newfloat} \\ % |\caption@setsubtype| & \package{floatrow} \\ % |\caption@starfalse| & \package{bidi} \\ % |\caption@startrue| & \package{bidi} \\ % |\caption@xlabel| & \package{cleveref} \\ % \end{tabular}\end{quote} % % If your package wants to use any other internal command of the \package{caption} package, % please write me an e-mail so we can define a proper interface together. % % The \package{lwarp} package uses a lot of internal commands as well, % but we are working on it on the Git branch \texttt{feature/lwarp}: % \url{https://gitlab.com/axelsommerfeldt/caption/-/tree/feature/lwarp} % % \StopEventually{} % \clearpage % \tableofcontents % % \iffalse % --------------------------------------------------------------------------- % % \fi % % \DoNotIndex{\\,\_,\ ,\@@par} % \DoNotIndex{\@bsphack} % \DoNotIndex{\@car,\@cdr,\@classoptionslist,\@cons,\@currext,\@currname} % \DoNotIndex{\@ehc,\@ehd,\@empty,\@esphack,\@expandtwoargs} % \DoNotIndex{\@for,\@firstofone,\@firstoftwo} % \DoNotIndex{\@gobble,\@gobblefour,\@gobbletwo,\@hangfrom} % \DoNotIndex{\if@minipage\@ifnextchar,\@ifpackagelater,\@ifpackageloaded} % \DoNotIndex{\@ifstar,\@ifundefined,\@latex@error,\@minipagefalse,\@minipagetrue} % \DoNotIndex{\@namedef,\@nameuse} % \DoNotIndex{\@onlypreamble,\@parboxrestore,\@plus,\@ptionlist} % \DoNotIndex{\@removeelement,\@restorepar,\@secondoftwo,\@setminipage,\@setpar} % \DoNotIndex{\@tempa,\@tempboxa,\@tempdima,\@tempdimb,\@tempdimc,\@tempb,\@tempc} % \DoNotIndex{\@testopt} % \DoNotIndex{\@undefined,\@unprocessedoptions,\@unusedoptionlist} % \DoNotIndex{\p@,\z@} % \DoNotIndex{\active,\addtocounter,\addtolength,\advance,\aftergroup} % \DoNotIndex{\baselineskip,\begin,\begingroup,\bfseries,\box} % \DoNotIndex{\catcode,\centering,\changes,\csname,\def,\divide,\do,\downarrow} % \DoNotIndex{\edef,\else,\empty,\end,\endcsname,\endgraf,\endgroup,\expandafter} % \DoNotIndex{\fi,\footnotesize,\global} % \DoNotIndex{\hangindent,\hbox,\hfil,\hsize,\hskip,\hspace,\hss} % \DoNotIndex{\ifcase,\ifdim,\ifnum,\ifodd,\ifvoid,\ifvmode} % \DoNotIndex{\ifx,\ignorespaces,\itshape} % \DoNotIndex{\Large,\large,\leavevmode,\leftmargini,\leftskip,\let,\linewidth} % \DoNotIndex{\llap,\long,\m@ne,\margin,\mdseries,\message} % \DoNotIndex{\newcommand,\newdimen,\newlength,\newline,\newif,\newsavebox} % \DoNotIndex{\next,\nobreak,\nobreakspace,\noexpand,\noindent,\numberline} % \DoNotIndex{\normalcolor,\normalfont,\normalsize,\or,\par,\parbox,\parfillskip} % \DoNotIndex{\parindent,\parskip,\prevdepth,\protect,\protected@edef,\protected@write} % \DoNotIndex{\providecommand,\quad} % \DoNotIndex{\raggedleft,\raggedright,\relax,\renewcommand,\RequirePackage} % \DoNotIndex{\rightskip,\rmfamily} % \DoNotIndex{\sbox,\scriptsize,\scshape,\setbox,\setlength,\sffamily,\slshape} % \DoNotIndex{\small,\string,\space,\strut} % \DoNotIndex{\textheight,\the,\toks@,\typeout,\ttfamily} % \DoNotIndex{\unvbox,\uparrow,\upshape,\usebox,\usepackage} % \DoNotIndex{\value,\vbox,\vsize,\vskip,\wd,\width,\z@skip} % \DoNotIndex{\AtBeginDocument,\AtEndOfPackage,\CurrentOption,\DeclareOption} % \DoNotIndex{\ExecuteOptions,\GenericWarning,\IfFileExists,\InputIfFileExists} % \DoNotIndex{\NeedsTeXFormat,\MessageBreak} % \DoNotIndex{\PackageError,\PackageInfo,\PackageWarning,\PackageWarningNoLine} % \DoNotIndex{\PassOptionsToPackage,\ProcessOptions,\ProvidesPackage} % % \iffalse % --------------------------------------------------------------------------- % % \fi % % \setlength{\parskip}{0pt plus 1pt} % \newcommand*\Note[2][Note]{\par{\small\emph{#1:} #2}\par} % % \changes{v1.0}{1994/10/27}{First release} % \changes{v1.1}{1994/11/03}{New option \texttt{centerlast}} % \changes{v1.2}{1994/11/28}{Support of the \package{float} package} % \changes{v1.3}{1995/01/09}{Support of \cs{captionlabelfont} in subcaptions} % \changes{v1.4}{1995/01/30}{New option \texttt{nooneline}} % \changes{v1.4b}{1995/04/05}{Bugfix release} % \changes{v3.0}{2003/12/20}{Rewritten; many new commands and features} % \changes{v3.0d}{2004/11/28}{Split into two packages: \package{caption} \& \package{caption3}} % % \iffalse % --------------------------------------------------------------------------- % % \fi % % \clearpage % % \iffalse %<*package> % \fi % % \section{Identification} % % \begin{macrocode} \NeedsTeXFormat{LaTeX2e}[1994/12/01] \ProvidesPackage{caption}[2020/10/26 v3.5g Customizing captions (AR)] % \end{macrocode} % % \section{Loading the kernel} % % \begin{macrocode} \RequirePackage{caption3}[2020/10/06] % needs v2.2b or newer % \end{macrocode} % % \section{Check against unknown document classes} % % \begin{macrocode} \caption@ifbool{documentclass}{}{% \caption@WarningNoLine{% Unknown document class (or package),\MessageBreak standard defaults will be used}} % \end{macrocode} % % \section{Check against incompatible packages} % % \changes{v3.0p}{2007/04/06}{Check against obsolete \package{caption2} package added} % \begin{macrocode} \@ifpackageloaded{caption2}{% \caption@Error{% You can't use both, the (obsolete) caption2 *and*\MessageBreak the (current) caption package}% \endinput }{} % \end{macrocode} % % \changes{v3.1}{2007/06/15}{Check against incompatible \package{ftcap} package added} % \changes{v3.1}{2007/06/15}{Check against incompatible \package{nonfloat} package added} % \changes{v3.1}{2007/06/18}{Check against incompatible \package{topcapt} package added} % \begin{macrocode} \caption@AtBeginDocument{% \@ifpackageloaded{ftcap}{\caption@DisablePositionOption{ftcap}}{}% \@ifpackageloaded{nonfloat}{\caption@DisablePositionOption{nonfloat}}{}% \@ifpackageloaded{topcapt}{\caption@DisablePositionOption{topcapt}}{}} % \end{macrocode} % \begin{macro}{\caption@DisablePositionOption} % \changes{v3.1g}{2008/03/20}{\texttt{position=b} added} % \changes{v3.1h}{2008/03/29}{% % Name changed from \cs{caption@IncompatiblePackage} to \cs{caption@DisablePositionOption}; % disables the `position' option now instead of issuing a warning} % |\caption@DisablePositionOption|\marg{package}\par % disables the `position' option. % \begin{macrocode} \newcommand*\caption@DisablePositionOption[1]{% \caption@InfoNoLine{% `#1' package detected; setting `position=b' for compatibility reasons}% \caption@setposition b% % \end{macrocode} % \begin{macrocode} \DeclareCaptionOption{position}{% \caption@Error{Usage of the `position' option is incompatible\MessageBreak to the `#1' package}}} % \end{macrocode} % \begin{macrocode} \@onlypreamble\caption@DisablePositionOption % \end{macrocode} % \end{macro} % % \section{Declaration of options} % % \subsection{Miscellaneous options} % % \begin{macrocode} \DeclareCaptionOption*{config}[caption]{% \InputIfFileExists{#1.cfg}% {\typeout{*** Local configuration file #1.cfg used ***}}% {\caption@Warning{Configuration file #1.cfg not found}}} % \end{macrocode} % % \begin{macro}{\caption@selectlistentry} % \changes{v3.2}{2010/11/07}{This macro added} % |\caption@selectlistentry|\marg{\purett{heading} or \purett{entry}} % \begin{macrocode} \newcommand*\caption@selectlistentry[1]{% \caption@ifinlist{#1}{heading}{% \let\caption@iflistheading\@firstoftwo }{\caption@ifinlist{#1}{default,list-entry,entry}{% \let\caption@iflistheading\@secondoftwo }{% \caption@Error{Undefined list-entry selection `#1'}% }}} % \end{macrocode} % \end{macro} % % \changes{v3.3}{2012-03-25}{Option \opt{list-entry} added} % \begin{macrocode} \DeclareCaptionOption{list-entry}{\caption@selectlistentry{#1}} \captionsetup{list-entry=default} % \end{macrocode} % % \begin{macro}{\caption@declparboxrestore} % \changes{v3.5g}{2020/10/26}{This macro added} % |\caption@declparboxrestore|\marg{name}\marg{code} % \begin{macrocode} % TODO: Remove \caption@declparboxrestore \newcommand\caption@declparboxrestore{% \caption@decl{parboxrestore}} % \end{macrocode} % \begin{macrocode} \@onlypreamble\caption@declparboxrestore % \end{macrocode} % \end{macro} % % \begin{macro}{\caption@setparboxrestore} % \changes{v3.2}{2010/11/07}{This macro added} % \changes{v3.5g}{2020/10/26}{New implementation; default changed from `partial' to `full'} % |\caption@setparboxrestore|\marg{\purett{partial} or \purett{full}} % \begin{macrocode} % TODO: Remove \caption@setparboxrestore \newcommand*\caption@setparboxrestore{% \caption@set{parboxrestore}} % \end{macrocode} % \begin{macrocode} \caption@declparboxrestore{full}{% \@parboxrestore} % \end{macrocode} % The original code (from |latex/base/ltboxes.dtx|): % \begin{verbatim} % \def\@parboxrestore{\@arrayparboxrestore\let\\\@normalcr} % \def\@arrayparboxrestore{% % \let\if@nobreak\iffalse % \let\if@noskipsec\iffalse % \let\par\@@par % \let\-\@dischyph % \let\'\@acci\let\`\@accii\let\=\@acciii % \parindent\z@ \parskip\z@skip % \everypar{}% % \linewidth\hsize % \@totalleftmargin\z@ % \leftskip\z@skip \rightskip\z@skip \@rightskip\z@skip % \parfillskip\@flushglue \lineskip\normallineskip % \baselineskip\normalbaselineskip % \sloppy} % \end{verbatim}%^^A % This one will be used by |\@caption| instead of |\@parboxrestore|. % \begin{macrocode} \caption@declparboxrestore{partial}{% \let\if@nobreak\iffalse \let\if@noskipsec\iffalse \let\par\@@par % \let\-\@dischyph % \let\'\@acci\let\`\@accii\let\=\@acciii \parindent\z@ \parskip\z@skip \everypar{}% % \linewidth\hsize % \@totalleftmargin\z@ \leftskip\z@skip \rightskip\z@skip \@rightskip\z@skip \parfillskip\@flushglue \lineskip\normallineskip \baselineskip\normalbaselineskip \sloppy \let\\\@normalcr} % \end{macrocode} % \end{macro} % % \begin{macro}{\caption@parboxrestore@mini} % \changes{v3.2}{2010/10/24}{This macro added} % \changes{v3.5g}{2020/10/26}{Renamed from \cs{caption@boxrestore@mini} to \cs{caption@parboxrestore@mini}} % Resets |\par| so the very first |\par| in |\@caption| behaves quite the same as in floating environments. % Will be used by |\set|\-|caption|\-|type|. % \begin{macrocode} \caption@declparboxrestore{mini}{% \let\par\@@par \parindent\z@ \parskip\z@skip \sloppy} % \end{macrocode} % \end{macro} % % `default' usually maps to `full'. % \changes{v3.5g}{2020/10/26}{The default of \cs{caption@parboxrestore} maps to `full' instead of `partial' now} % \begin{macrocode} \SetCaptionDefault{parboxrestore}{full} % \end{macrocode} % % \changes{v3.2}{2010/11/07}{Option \opt{parboxrestore} added} % \begin{macrocode} % TODO: Remove the (undocumentated) option "parboxrestore" \DeclareCaptionOption{parboxrestore}{\caption@setparboxrestore{#1}} % \end{macrocode} % % \begin{macro}{\caption@parboxrestore} % \changes{v3.1}{2007/03/03}{This macro and its usage added} % \changes{v3.1b}{2007/09/17}{Bugfix: Redefinition of CR added} % \changes{v3.2}{2010/11/07}{Support of option \opt{parboxrestore} added} % \changes{v3.5g}{2020/10/26}{New implementation; renamed from \cs{caption@boxrestore} to \cs{caption@parboxrestore}} % \begin{macrocode} % TODO: Change definition to \def\caption@parboxrestore{\@parboxrestore} \captionsetup{parboxrestore=default} % \end{macrocode} % \end{macro} % % \changes{v3.1f}{2007/11/28}{Option \opt{@minipage=} added} % \begin{macrocode} \DeclareCaptionOption{@minipage}{% \caption@ifinlist{#1}{auto,default}% {\let\caption@if@minipage\@gobbletwo}% {\caption@set@bool\caption@if@minipage{#1}}} \captionsetup{@minipage=default} % \end{macrocode} % % \subsection{caption v1.x compatibility options} % \changes{v3.1}{2007/07/21}{Option `compatibility' added} % \changes{v3.1}{2007/09/01}{caption v1.x compatibility options revised} % \changes{v3.1d}{2007/10/24}{Bugfix 07-10-24 in caption v1.x$ compatibility options} % \changes{v3.5a}{2020/09/02}{caption v1.x compatibility options fixed} % % Currently we support |v1| and |v3| as values for the |compatibility=| option. % But since this used to be a boolean option is the past we still support any boolean value % for compatibility reasons. % % \begin{macrocode} \DeclareCaptionOption{compatibility}[v1]{% \caption@ifinlist{#1}{v1,1,true,yes,on}{% \let\caption@ifcompatibility\@firstoftwo }{\caption@ifinlist{#1}{v3,3,0,false,no,off}{% \let\caption@ifcompatibility\@secondoftwo }{% \caption@Error{Undefined compatibility value `#1'}% }}} \@onlypreamble@key{caption}{compatibility} % \end{macrocode} % \begin{macrocode} \caption@setbool{compatibility}{0} % default: Try not to be compatible to v1.x % \end{macrocode} % % \begin{macro}{\caption@setincompatible} % \changes{v3.4}{2019/09/09}{This macro added} % |\caption@setincompatible|\marg{condition}\marg{message text} % \begin{macrocode} \newcommand*\caption@setincompatible[2]{% #1{% \caption@WarningNoLine{% #2;\MessageBreak Setting compatibility to v1}% \caption@setbool{compatibility}{1}% }{}} % \end{macrocode} % \end{macro} % % Check against incompatible packages which used to work fine with v1 of the `caption' package. % \begin{macrocode} \caption@AtBeginDocument{\caption@ifcompatibility{}{% % \end{macrocode} % The usage of the (now obsolete) \package{captcont} package, % which brings its own definition of |\caption*|, was quite common in the old days. % \begin{macrocode} \caption@setincompatible{\@ifpackageloaded{captcont}}{captcont package is loaded}% % \end{macrocode} % To be continued\ldots % \begin{macrocode} }} % \end{macrocode} % % \begin{macrocode} \DeclareCaptionOptionNoValue*{normal}{% \caption@setup{format=plain,justification=justified}} \DeclareCaptionOptionNoValue*{isu}{% \caption@setup{format=hang,justification=justified}} \DeclareCaptionOptionNoValue*{hang}{% \caption@setup{format=hang,justification=justified}} \DeclareCaptionOptionNoValue*{center}{% \caption@setup{format=plain,justification=centering}} \DeclareCaptionOptionNoValue*{centerlast}{% \caption@setup{format=plain,justification=centerlast}} % \end{macrocode} % % \begin{macrocode} \DeclareCaptionOptionNoValue*{scriptsize}{\def\captionfont{\scriptsize}} \DeclareCaptionOptionNoValue*{footnotesize}{\def\captionfont{\footnotesize}} \DeclareCaptionOptionNoValue*{small}{\def\captionfont{\small}} \DeclareCaptionOptionNoValue*{normalsize}{\def\captionfont{\normalsize}} \DeclareCaptionOptionNoValue*{large}{\def\captionfont{\large}} \DeclareCaptionOptionNoValue*{Large}{\def\captionfont{\Large}} % \end{macrocode} % % \begin{macrocode} \DeclareCaptionOptionNoValue*{up}{\caption@setup{labelfont+=up}} \DeclareCaptionOptionNoValue*{it}{\caption@setup{labelfont+=it}} \DeclareCaptionOptionNoValue*{sl}{\caption@setup{labelfont+=sl}} \DeclareCaptionOptionNoValue*{sc}{\caption@setup{labelfont+=sc}} \DeclareCaptionOptionNoValue*{md}{\caption@setup{labelfont+=md}} \DeclareCaptionOptionNoValue*{bf}{\caption@setup{labelfont+=bf}} \DeclareCaptionOptionNoValue*{rm}{\caption@setup{labelfont+=rm}} \DeclareCaptionOptionNoValue*{sf}{\caption@setup{labelfont+=sf}} \DeclareCaptionOptionNoValue*{tt}{\caption@setup{labelfont+=tt}} % \end{macrocode} % % \begin{macrocode} \DeclareCaptionOptionNoValue*{nooneline}{\caption@setup{slc=0}} % \end{macrocode} % % \begin{macrocode} \caption@setbool{ruled}{0} \DeclareCaptionOptionNoValue*{ruled}{\caption@setbool{ruled}{1}} % \end{macrocode} % % \subsection{caption2 v2.x compatibility options} % \changes{v3.0h}{2005/07/08}{caption2 \version{2.x} compatibility options added} % \changes{v3.1}{2007/09/01}{caption2 v2.x compatibility options revised} % \changes{v3.1d}{2007/10/24}{Bugfix 07-10-24 in caption v2.x$ compatibility options} % \changes{v3.5a}{2020/09/02}{caption v2.x compatibility options fixed} % % \begin{macrocode} \DeclareCaptionOptionNoValue*{flushleft}{% \caption@setup{format=plain,justification=raggedright}} \DeclareCaptionOptionNoValue*{flushright}{% \caption@setup{format=plain,justification=raggedleft}} % \end{macrocode} % \begin{macrocode} \DeclareCaptionOptionNoValue*{oneline}{\caption@setup{slc=1}} % \end{macrocode} % \begin{macrocode} \DeclareCaptionOptionNoValue*{ignoreLTcapwidth}{% \caption@WarningNoLine{Obsolete option `ignoreLTcapwidth' ignored}} % \end{macrocode} % % \subsection{Obsolete caption v3.0 options} % \changes{v3.1}{2007/05/07}{Package option \opt{caption} marked as obsolete, % gives error now} % % \begin{macrocode} \DeclareCaptionOption*{caption}{% \caption@setbool{temp}{#1}% \caption@ifbool{temp}{}{% \caption@Error{% The package option `caption=#1' is obsolete.\MessageBreak Please pass this option to the subfig package instead\MessageBreak and do *not* load the caption package anymore}}} % \end{macrocode} % % \subsection{fltpage package support options} % % \changes{v3.1}{2007/09/01}{Options `FPlist' \& `FPref' added} % With these options is controlled where the list-of entry and |\ref| resp. % |\pageref| or |\autoref| will link to. % Defaults are |FPlist=caption| and |FPref=figure| which is inconsistent, % but compatible to the usual behaviour of the \package{fltpage} package. % \begin{macrocode} \DeclareCaptionOption{FPlist}[1]{\caption@setFPoption{list}{#1}} \DeclareCaptionOption{FPref}[1]{\caption@setFPoption{ref}{#1}} \@onlypreamble@key{caption}{FPlist} \@onlypreamble@key{caption}{FPref} % \end{macrocode} % \begin{macrocode} \newcommand*\caption@setFPoption[2]{% \edef\caption@tempa{\@car#2\@nil}% \caption@setbool{FP#1cap}{\if c\caption@tempa 1\else 0\fi}} \@onlypreamble\caption@setFPoption % \end{macrocode} % \begin{macrocode} \captionsetup{FPlist=caption,FPref=figure} % \end{macrocode} % % \subsection{hyperref package support options} % % \changes{v3.1}{2007/06/21}{Options `hypcap' \& `hypcapspace' added} % With |hypcap=off| one can turn the \package{hypcap} support off % (default is |on|). % \begin{macrocode} \DeclareCaptionOption{hypcap}[1]{\caption@setbool{hypcap}{#1}} \DeclareCaptionOption{hypcapspace}{\def\caption@hypcapspace{#1}} % \end{macrocode} % \begin{macrocode} \captionsetup{hypcap=1,hypcapspace=.5\baselineskip} % \end{macrocode} % % \section{Document class support} % % Execute the code declared with |\At|\-|Caption|\-|Package|. % We do this right before processing the options so stuff done with % |\At|\-|Caption|\-|Package| could be overwritten by user options. % % \begin{macrocode} \caption@documentclass@code \let\caption@documentclass@code\@undefined \let\AtCaptionPackage\@firstofone % \end{macrocode} % % \section{Processing of options} % % \changes{v3.0m}{2007/03/04}{Verbose option added} % \changes{v3.1}{2007/07/02}{Verbose option removed from package} % \changes{v3.1}{2007/03/17}{We do not process global options anymore} % % \begin{macrocode} \caption@SetupOptions{caption}{\caption@setkeys{#1}{#2}} \caption@ProcessOptions*{caption} % \end{macrocode} % % \section{\cs{caption}, \cs{@caption}, and \cs{@makecaption}} % % \begin{macro}{\caption@ifflag} % \changes{v3.3}{2011/12/28}{This switch added} % \changes{v3.3}{2018/08/08}{Rewritten (and renamed) so a counter is used instead of a switch} % Since we support continued floats and sub-figures it's not an easy task % to manage the figure (and table) counter. (Especially since previous versions % of the caption package has proven that correcting a counter locally is not a good idea.) % % These three switches hold the % current status: |\caption@if|\-|flag{2}| is set if the caption was already % typeset (so the counter doesn't need to be incremented for sub-figures), % |\caption@if|\-|flag{4}| is set if there is already content which have % incremented the counter (so the counter doesn't need to be incremented % for the main caption, further sub-figures, and other stuff), and % |\caption@if|\-|flag{1}| is set if |\continued|\-|float| was given. % % In the past three boolean switches were used to store the flags, but since some % packages (like the \package{floatrow} and \package{tabu} package) try hard to keep % counter changes locally under certain circumstances, it seems a good idea to make % these flags a counter value, too. % \begin{macrocode} \newcounter{caption@flags} % \end{macrocode} % \begin{macrocode} \newcommand*\caption@ifflag[1]{% \@tempcnta\c@caption@flags \divide\@tempcnta #1\relax \ifodd\@tempcnta \expandafter\@firstoftwo \else \expandafter\@secondoftwo \fi} % \end{macrocode} % \end{macro} % % \begin{macro}{\caption@clrflags} % \changes{v3.3}{2018/08/08}{This macro added} % \begin{macro}{\caption@clrflag} % \changes{v3.3}{2013/04/14}{This macro added} % \changes{v3.3}{2018/08/08}{Rewritten so a counter is used instead of a switch} % \begin{macro}{\caption@setflag} % \changes{v3.3}{2013/04/14}{This macro added} % \changes{v3.3}{2018/08/08}{Rewritten so a counter is used instead of a switch} % Furthermore we introduce the macros \cs{caption@clrflag} and \cs{caption@setflag} % for clearing resp.~setting these flags. % \begin{macrocode} \newcommand*\caption@clrflags{% \setcounter{caption@flags}\z@} % \end{macrocode} % \begin{macrocode} \newcommand*\caption@clrflag[1]{% \caption@ifflag{#1}{\caption@addtoflags{-#1}}{}} \newcommand*\caption@setflag[1]{% \caption@ifflag{#1}{}{\caption@addtoflags{#1}}} \newcommand*\caption@addtoflags{% \addtocounter{caption@flags}} % \end{macrocode} % \end{macro} % \end{macro} % \end{macro} % % \begin{macro}{\caption@caption} % \changes{v3.0f}{2005/05/22}{Bugfix: \cs{ContinuedFloat} added} % \changes{v3.0f}{2005/06/13}{Support of \cs{caption*[]} removed} % \changes{v3.0l}{2007/01/19}{Minimal support of \textsf{combine} package added} % \changes{v3.1}{2007/02/04}{Re-written, does not save\&use original definition anymore} % Here comes our definition of |\caption| and |\caption*|. % Beside the support of the starred variant this code was adapted to the % various packages we support. % We are using |\caption@dblarg| instead of |\@dblarg| so |\caption{}| % (with an empty arg.) will produce a list-of entry, but |\caption[]{}| % won't. % \begin{macrocode} \def\caption@caption{% \caption@iftype {\caption@checkgrouplevel\@empty\caption \caption@star {\caption@refstepcounter\@captype}% {\caption@dblarg{\@caption\@captype}}}% {\caption@Error{\noexpand\caption outside float}% \caption@gobble}} % \end{macrocode} % \end{macro} % % \begin{macro}{\caption@star} % \changes{v3.1}{2007/06/24}{Renamed from \cs{caption@caption} to \cs{caption@star}} % \changes{v3.2c}{2011/08/21}{\cs{global} removed} % A helper macro which processes the optional |*| after |\caption|. % \begin{macrocode} \newcommand*\caption@star[2]{% \@ifstar{\caption@startrue#2[]}{#1#2}} % \end{macrocode} % \end{macro} % % \begin{macro}{\caption@@caption} % \changes{v3.1}{2007/02/04}{Re-written, does not save\&use original definition anymore} % \changes{v3.1f}{2007/11/28}{Bugfix: Handling of \texttt{@minipage} flag added} % \changes{v3.1f}{2007/11/28}{Support of option \opt{@minipage} added} % \changes{v3.1g}{2008/03/16}{Internal: Uses \cs{caption@prepareanchor} now} % \changes{v3.2d}{2011/10/21}{Adapted to the \textsf{memoir} document class} % \changes{v3.2f}{2012/01/14}{Usage of \cs{M@gettitle} moved to \cs{caption@prepareanchor}} % \changes{v3.3}{2013/01/06}{Adapted to the \textsf{nag} package} % As above, our version has been adapted to the packages we support. % Additionally our code is nested by |\caption@begin|\-|ex| \& % |\caption@end| instead of |\begin|\-|group| \& |\end|\-|group|. % Furthermore we use |\caption@par|\-|box|\-|restore| instead of % |\@parbox|\-|restore|. % \begin{macrocode} \long\def\caption@@caption#1[#2]#3{% % \end{macrocode} % \begin{macrocode} \ifcaption@star \else \caption@prepareanchor{#1}{#2}% \memcaptioninfo{#1}{\csname the#1\endcsname}{#2}{#3}% \@nameuse{nag@hascaptiontrue}% \fi % \end{macrocode} % \begin{macrocode} \par \caption@beginex{#1}{#2}{#3}% \caption@setfloatcapt{% \caption@parboxrestore \if@minipage \@setminipage \fi \caption@normalsize \ifcaption@star \let\caption@makeanchor\@firstofone \fi \@makecaption{\csname fnum@#1\endcsname}% {\ignorespaces\caption@makeanchor{#3}}\par \caption@if@minipage\@minipagetrue\@minipagefalse}% \caption@end} % \end{macrocode} % \class{memoir} document class stuff: % \begin{macrocode} \providecommand\memcaptioninfo[4]{} % \end{macrocode} % \end{macro} % % \begin{macro}{\caption@prepareanchor} % \changes{v3.1g}{2008/03/16}{This macro added} % \changes{v3.2f}{2012/01/14}{Usage of \cs{M@gettitle} moved from \cs{caption@@caption}} % \begin{macrocode} \newcommand*\caption@prepareanchor[2]{% \caption@makecurrent{#1}{#2}% \caption@ifhypcap\caption@@start\relax \M@gettitle{#2}} % \end{macrocode} % \class{memoir} document class stuff: % \begin{macrocode} \providecommand\M@gettitle[1]{} % \end{macrocode} % \end{macro} % % \begin{macro}{\caption@makecaption} % \changes{v3.1i}{2008/05/06}{Usage of \cs{caption@rule} added} % |\@makecaption|\marg{label}\marg{text}\par % We do basically the same as the original code (from the standard % \LaTeX\ document classes), but take care of the |position=| setting % and use |\caption@@make| from the \package{caption} kernel to finally % typeset the caption. % \begin{macrocode} \long\def\caption@makecaption#1#2{% \caption@make@above \caption@@make{#1}{#2}% \caption@make@below} % \end{macrocode} % \end{macro} % % \begin{macro}{\caption@make@above} % \begin{macro}{\caption@make@below} % \changes{v3.3a}{2019/04/02}{This macro added} % |\caption@make@above|\\ % |\caption@make@below|\par % Typesets the stuff above resp.~below the caption, depending on |\caption@iftop|. % \begin{macrocode} \newcommand*\caption@make@above{% \caption@iftop \caption@belowskip {\caption@rule\caption@aboveskip}} % \end{macrocode} % \begin{macrocode} \newcommand*\caption@make@below{% \caption@iftop {\caption@aboveskip\caption@rule}% \caption@belowskip} % \end{macrocode} % \end{macro} % \end{macro} % % \begin{macro}{\caption@redefine} % \changes{v3.1k}{2009/03/30}{This macro added, it contains the patching code now} % \begin{macrocode} \newcommand*\caption@redefine{} % \end{macrocode} % \end{macro} % % Prior to \version{3.4} we only redefined |\caption| and |\@caption| if the current definitions % were well known, so documents written in the old (\package{caption} package \version{1.x}) days % (where |\caption| \& |\@caption| were not redefined by us) still compiled fine. % This used to make sense when introducing \version{3.0} in the year 2003 % but is simply overcautious and especially unwanted by the user nowadays. % So starting with \version{3.4} we only do not redefine |\caption| and |\@caption| if the % `compatibility' option is set to `v1'. % % \begin{macrocode} \g@addto@macro\caption@redefine{% % \end{macrocode} % \begin{macrocode} \caption@ifcompatibility{% % \end{macrocode} % \begin{macrocode} \caption@InfoNoLine{ \noexpand\caption will not be redefined since `compatibility' is set to v1}% % \end{macrocode} % \begin{macrocode} \renewcommand*\caption@redefine{}% % \end{macrocode} % % |\continuedfloat| is not supported in compatibility mode `v1'. % \begin{macrocode} \renewcommand*\caption@continuedfloat[1]{% \caption@Error{Not available with option `compatibility=v1'}}% % \end{macrocode} % % |\caption@start| is not supported in compatibility mode `v1'. % \begin{macrocode} \caption@AtBeginDocument*{% \let\caption@start\relax \caption@ifdefined\caption@ORI@capstart{% \caption@Debug{% Restore hypcap definition of \string\capstart\@gobble}% \let\capstart\caption@ORI@capstart}{}% }% % \end{macrocode} % % \begin{macro}{\caption@star} % We redefine |\caption@star| here so it does not make any harm. % \begin{macrocode} \renewcommand*\caption@star[2]{#1#2}% % \end{macrocode} % \end{macro} % % \begin{macrocode} }{% % \end{macrocode} % % \begin{macro}{\caption} % \begin{macro}{\@caption} % \begin{macrocode} \renewcommand*\caption@redefine{% \let\caption\caption@caption \let\@caption\caption@@caption}% % \end{macrocode} % \end{macro} % \end{macro} % % \begin{macrocode} }% % \end{macrocode} % \begin{macrocode} \caption@redefine \caption@AtBeginDocument*{% \let\caption@ORI@capstart\@undefined}% % \end{macrocode} % % \begin{macro}{\@xfloat} % \changes{v3.1}{2007/05/09}{This re-definition added} % \changes{v3.1b}{2007/09/22}{Will now be redefined in compatibility mode, too} % \changes{v3.5}{2020/08/30}{Hook added} % We redefine |\@x|\-|float| so inside floating environments our % type-specific options will be used, a \package{hyperref} % anchor will be set etc. % \begin{macrocode} \let\caption@ORI@xfloat\@xfloat % \end{macrocode} % \begin{macrocode} \def\@xfloat#1[#2]{% \caption@ORI@xfloat{#1}[#2]% \caption@settype{#1}% \caption@xfloat@hook}% % \end{macrocode} % Hook, could be extended with |\g@addto@macro\caption@x|\-|float@hook{|\ldots|}|. % (The caption type could be found in |\@cap|\-|type|.) % \begin{macrocode} \newcommand*\caption@xfloat@hook{}% % \end{macrocode} % \end{macro} % % \begin{macro}{\@xdblfloat} % \changes{v3.5}{2020/08/30}{Re-definition of \cs{xdblfloat} added} % We redefine |\@xdbl|\-|float|, too, so special options for |figure*| % resp.~|table*| will be applied here. % \begin{macrocode} \let\caption@ORI@xdblfloat\@xdblfloat % \end{macrocode} % \begin{macrocode} \def\@xdblfloat#1[#2]{% \caption@ORI@xdblfloat{#1}[#2]% expands to \@xfloat{#1}[#2] + extra stuff \caption@setoptions{#1*}% \caption@xdblfloat@hook}% % \end{macrocode} % Hook, could be extended with |\g@addto@macro\caption@xdbl|\-|float@hook{|\ldots|}|. % (The caption type could be found in |\@cap|\-|type|.) % \begin{macrocode} \newcommand*\caption@xdblfloat@hook{}% % \end{macrocode} % \end{macro} % % \begin{macrocode} } % \end{macrocode} % % Some packages (like the \package{hyperref} package for example) redefines % |\caption| and |\@caption|, too. % So we have to use |\AtBeginDocument| here, so we can make sure % our definition is the one which will be valid at last. % \begin{macrocode} \caption@AtBeginDocument{\caption@redefine} % \end{macrocode} % % \begin{macro}{\@makecaption} % \begin{macrocode} \let\@makecaption\caption@makecaption % \end{macrocode} % \end{macro} % % \begin{macro}{\phantomcaption} % \changes{v3.2}{2010/10/31}{Bugfix 10-09-01b: This macro added} % |\phantomcaption|\par % Use this one for figures with subcaptions but without main caption. % \begin{macrocode} \newcommand\phantomcaption{% \caption@iftype {\caption@refstepcounter\@captype}% {\caption@Error{\noexpand\phantomcaption outside float}}}% % \end{macrocode} % \end{macro} % % \section{\cs{setcaptiontype} and \cs{setcaptionsubtype}} % % \changes{v3.0d}{2004/08/03}{Option \opt{type=} added} % \changes{v3.1}{2007/06/25}{Option \opt{type*=} added} % \changes{v3.1f}{2007/11/16}{Option \opt{subtype} \& \opt{subtype*} added} % \changes{v3.2}{2010/10/24}{Bugfix 10-10-17: Option \opt{type=} uses \cs{setcaptiontype} instead of \cs{caption@settype} now} % % \begin{macrocode} \caption@AtBeginDocument{% % \end{macrocode} % \begin{macrocode} \DeclareCaptionOption{type}{\setcaptiontype{#1}}% \DeclareCaptionOption{type*}{\setcaptiontype*{#1}}% % \end{macrocode} % \begin{macrocode} \DeclareCaptionOptionNoValue{subtype}{\setcaptionsubtype\relax}% \DeclareCaptionOptionNoValue{subtype*}{\setcaptionsubtype*}% % \end{macrocode} % \begin{macrocode} } % \end{macrocode} % % \emph{Important Note:} % Like |\captionof| the option |type=| should only be used inside a % group, box, or environment and does not check if the argument is a valid % floating environment or not. % % \begin{macro}{\setcaptiontype} % \changes{v3.2}{2010/10/24}{This macro added} % \changes{v3.4e}{2020/01/02}{Check added if the subtype is defined} % \changes{v3.5}{2020/08/24}{Definition method adapted to the \package{caption-light} package} % Like |\captionsetup{type=xxx}|, but also works if |\caption|\-|setup| was redefined. % \begin{macrocode} \def\setcaptiontype{% \caption@parboxrestore@mini \caption@settype} % \end{macrocode} % \end{macro} % % \begin{macro}{\setcaptionsubtype} % \changes{v3.2a}{2011/08/15}{This macro added} % \changes{v3.5d}{2020/09/28}{This macro revised} % Same, but sets the sub-type. % \begin{macrocode} \newcommand\setcaptionsubtype{% \caption@iftype \caption@setsubtype {\caption@Error{\noexpand\setcaptionsubtype outside float}}}% % \end{macrocode} % \begin{macrocode} \newcommand\caption@setsubtype{% \caption@teststar\caption@@setsubtype\@firstoftwo\@secondoftwo} % \end{macrocode} % \begin{macrocode} \newcommand*\caption@@setsubtype[1]{% \caption@@@settype{sub}{#1}{sub\@captype}} % \end{macrocode} % \end{macro} % % \begin{macro}{\caption@settype} % \changes{v3.1}{2007/05/09}{This macro added} % \changes{v3.1b}{2007/09/22}{Usage of \cs{caption@xlabel} added} % \changes{v3.1d}{2007/10/23}{Error message for \cs{caption@checkgrouplevel} revised} % \changes{v3.1f}{2007/11/16}{\cs{caption@setsubtype} added} % \changes{v3.1f}{2007/12/03}{Crappy \cs{caption@iftypewarning} replaced} % \changes{v3.1g}{2008/01/12}{Usage of \cs{ifcaptionsetup@star} added} % \changes{v3.2}{2010/10/26}{Error message moved from here to \cs{caption@refstepcounter}} % \changes{v3.3}{2011/12/28}{Resetting of \cs{ifcaption@caption} and \cs{ifcaption@subcaption} added} % \changes{v3.4e}{2020/01/02}{Checks added to prevent misuse regading subtypes} % \changes{v3.5d}{2020/09/28}{This macro revised} % |\caption@settype*|\marg{type}\par % sets |\@captype| and executes the options associated with it % (using |\caption@set|\-|options|). % Furthermore we check |\current|\-|group|\-|level| (if avail), % redefine |\@currentlabel| so a |\label| before |\caption| will result % in a hint instead of a wrong reference, and % use the macro |\caption@|(|sub|)|type|\-|hook| (which will be used by our % \package{float} package support).\par % The non-starred version sets a \package{hyperref} anchor additionally % (if |hypcap=|\-|true| and the \package{hypcap} package is not loaded). % \begin{macrocode} \newcommand*\caption@settype{% \caption@clrflags \caption@set@type} % \end{macrocode} % \begin{macrocode} \newcommand*\caption@set@type{% \caption@teststar\caption@@settype\@firstoftwo\@secondoftwo} % \end{macrocode} % \begin{macrocode} \newcommand*\caption@@settype{% \caption@@@settype{}} % \end{macrocode} % \begin{macrocode} \newcommand*\caption@@@settype[3]{% % #1 = "" or "sub" % #2 = \@firstoftwo in star form, \@secondoftwo otherwise % #3 = , e.g.: "figure" or "subfigure" \caption@Debug{#1type=#3}% \@nameuse{caption@check#1type}{#3}% {\caption@checkgrouplevel{#1}{% \captionsetup{#1type#2*\@empty=...}#2{ or \@backslashchar#1captionof}{}}% % \end{macrocode} % \begin{macrocode} \edef\caption@tempa{#3}% \expandafter\ifx\csname @#1captype\endcsname\caption@tempa \else \ifcaptionsetup@star\else\@nameuse{caption@#1type@warning}\fi \fi \expandafter\let\csname @#1captype\endcsname\caption@tempa % \end{macrocode} % \begin{macrocode} \@nameuse{caption@#1typehook}% % \end{macrocode} % \begin{macrocode} \caption@setoptions{#3}% \ifx\caption@opt\relax \@nameundef{caption@#1type@warning}% \else \@namedef{caption@#1type@warning}{\caption@Warning{% The #1type was already set to `\csname @#1captype\endcsname'\MessageBreak}}% \fi % \end{macrocode} % \begin{macrocode} #2{}{% \let\@currentlabel\caption@undefinedlabel % \let\@currentHlabel\@undefined \ifx\caption@x@label\@undefined \let\caption@x@label\label \let\label\caption@xlabel \fi \caption@start}}} % \end{macrocode} % \end{macro} % % \begin{macro}{\caption@iftype} % \changes{v3.1}{2007/04/11}{This macro and its usage added} % Since we often need to check if |\@captype| is defined (means: we % are inside a floating environment) this helper macro was introduced. % \begin{macrocode} \newcommand*\caption@iftype{\caption@ifdefined\@captype} % \end{macrocode} % \end{macro} % % \begin{macro}{\caption@checktype} % \changes{v3.4g}{2020/01/02}{This macro and its usage added} % \changes{v3.4m}{2020/07/29}{Check of \cs{sf@counterlist} from \package{subfig} package added} % |\caption@checktype|\marg{type}\marg{code}\par % is used by |\caption@settype| and should either expand the code or issue an error % if the given type is not a proper type, i.e. it is a sub-type instead (either defined by % |\DeclareCaptionSubType| or |\newsubfloat|\cite{subfig}). % \begin{macrocode} \newcommand*\caption@checktype[1]{% \caption@ifsubtype{#1}\@firstoftwo{\caption@ifin@list\sf@counterlist{#1}}% {\caption@Error{Should not be used with subtype `#1'}% \@gobble}% \@firstofone} % \end{macrocode} % \end{macro} % % \begin{macro}{\caption@checksubtype} % \changes{v3.4g}{2020/01/02}{This macro and its usage added} % \changes{v3.4m}{2020/07/29}{Check of \cs{sf@counterlist} from \package{subfig} package added} % |\caption@checksubtype|\marg{type}\marg{code}\par % is used by |\caption@settype| and should either expand the code or issue an error % if the given type is not a proper sub-type, i.e. not defined by |\Declare|\-|Caption|\-|Sub|\-|Type|. % Since the |sub|\-|float|\-|row| environment offered by the \package{floatrow} package\cite{floatrow} % is using |\caption|\-|setup{sub|\-|type}| even if the sub-type was defined by |\new|\-|sub|\-|float| % offered by \package{subfig}\cite{subfig}, we take a more relaxed view of things here and allow % those sub-types as well (but not without warning since we do not support this). % \begin{macrocode} \newcommand*\caption@checksubtype[1]{% \caption@ifsubtype{#1}% \@firstofone {\caption@ifin@list\sf@counterlist{#1}% {\caption@Warning{% \noexpand\setcaptionsubtype without \string\DeclareCaptionSubType.\MessageBreak This is not designed to work; you could try replacing\MessageBreak the `subfig' package with `subcaption' to resolve\MessageBreak this problem which occurred}% \@firstofone}% {\caption@Error{Undefined subtype `#1'}% \@gobble}}} % \end{macrocode} % \end{macro} % % \begin{macro}{\caption@checkgrouplevel} % \changes{v3.1}{2007/07/15}{This macro and its usage added} % \changes{v3.1f}{2007/11/28}{Error changed to warning (compatibility)} % \changes{v3.3}{2013/04/21}{Uses \cs{caption@ifeTeX} now} % \changes{v3.5}{2019/09/11}{Relies on \eTeX{} now} % Checks if |\captionsetup{type=|\ldots|}| or |\caption| is done % inside a group or not -- in the latter case a warning message will % be issued. % \begin{macrocode} \newcommand*\caption@checkgrouplevel[2]{% \@ifundefined{#1caption@grouplevel}{% \caption@ifundefined\caption@grouplevel{\let\caption@grouplevel\z@}{}% \ifnum\currentgrouplevel>\caption@grouplevel\relax \expandafter\edef\csname #1caption@grouplevel\endcsname{% \the\currentgrouplevel}% \else \caption@Warning{\string#2\MessageBreak outside box or environment}% \fi }{}}% % \end{macrocode} % \end{macro} % % \begin{macro}{\caption@undefinedlabel} % \changes{v3.1}{2007/07/03}{This macro and its usage added} % \changes{v3.1b}{2007/09/22}{Contents changed to \texttt{??}} % \changes{v3.1i}{2008/04/13}{Contents changed to \cs{caption@xref}(\ldots)} % \changes{v3.1k}{2009/03/30}{Bugfix 08-12-08: \cs{caption@xref} is robust now} % \changes{v3.2c}{2011/09/13}{Text changed from `before' to `without proper'} % \changes{v3.3}{2016/02/21}{Text changed from `without proper \cs{caption}' to `without proper reference'} % This label will be used for |\currentlabel| inside (floating) environments % as default. (see above) % \iffalse\Note{All commands used have to be robust here.}\fi % \begin{macrocode} \newcommand*\caption@undefinedlabel{% \protect\caption@xref{\caption@labelname}{\on@line}} % \end{macrocode} % \begin{macrocode} \DeclareRobustCommand*\caption@xref[2]{% \caption@WarningNoLine{\noexpand\label without proper reference#2}% \@setref\relax\@undefined{#1}} % \end{macrocode} % \begin{macrocode} \newcommand*\caption@labelname{??} % \end{macrocode} % \end{macro} % \begin{macro}{\caption@xlabel} % \changes{v3.1b}{2007/09/22}{This macro and its usage added} % \changes{v3.1f}{2007/11/11}{Revised} % \changes{v3.1i}{2008/04/13}{Bugfix: \cs{pageref} should always work now} % \changes{v3.2c}{2011/08/19}{Works with optional arguments now, too} % The new code of |\label| inside floating environments. % |\label| will be redefined using |\caption@withoptargs|, so % |#1| are the optional arguments (if any), and % |#2| is the mandatory argument here. % \begin{macrocode} \newcommand*\caption@xlabel{% \caption@withoptargs\caption@@xlabel} % \end{macrocode} % \begin{macrocode} \newcommand*\caption@@xlabel[2]{% \caption@@@xlabel \def\caption@labelname{#2}% \caption@x@label#1{#2}} % \end{macrocode} % \begin{macrocode} \newcommand*\caption@@@xlabel{% \global\let\caption@@@xlabel\@empty \@bsphack \protected@write\@auxout{}% {\string\providecommand*\string\caption@xref[2]{% \string\@setref\string\relax\string\@undefined{\string##1}}}% \@esphack} % \end{macrocode} % \end{macro} % % \begin{macro}{\captionof} % \changes{v3.1}{2007/05/09}{Uses \cs{caption@settype} instead of \cs{def}\cs{@captype}} % \changes{v3.1c}{2007/09/22}{Bugfix: Redefinition of \cs{caption@setfloatcapt} removed} % \changes{v3.1e}{2007/10/30}{Better compatibility: Will be defined with \cs{AtBeginDocument} now} % \changes{v3.2}{2010/10/24}{Bugfix 10-10-17: Uses \cs{setcaptiontype} instead of \cs{caption@settype} now} % \changes{v3.5}{2020/08/24}{Definition method adapted to the \package{caption-light} package} % |\captionof|\marg{type}\oarg{lst\_entry}\marg{heading}\\ % |\captionof*|\oarg{lst\_entry}\marg{heading}\par % \Note{This will be defined with \cs{AtBeginDocument} so % \cs{usepackage}\csmarg{caption,capt-of} will still work. % (Compatibility to \version{1.x})} % \begin{macrocode} \caption@AtBeginDocument{% \def\captionof{\caption@teststar\caption@of{\caption*}\caption}} % \end{macrocode} % \begin{macrocode} \providecommand*\caption@of[2]{\setcaptiontype*{#2}#1} % \end{macrocode} % \end{macro} % % \section{\cs{captionlistentry}} % % \begin{macro}{\captionlistentry} % \changes{v3.1}{2007/07/28}{This macro added} % \changes{v3.1f}{2007/11/16}{Bugfix 07-11-09: `space hack' added} % \changes{v3.1g}{2008/01/20}{Starred variant added} % \changes{v3.1l}{2010/01/09}{Adapted to current version of nameref package} % |\captionlistentry|\oarg{float type}\marg{list entry}\\ % |\captionlistentry*|\oarg{float type}\marg{list entry} % \begin{macrocode} \newcommand*\captionlistentry{% \caption@teststar\@captionlistentry\@firstoftwo\@secondoftwo} % \end{macrocode} % \begin{macrocode} \newcommand*\@captionlistentry[1]{% \@testopt{\caption@listentry{#1}}\@captype} % \end{macrocode} % \begin{macrocode} \def\caption@listentry#1[#2]#3{% \@bsphack #1{\caption@gettitle{#3}}% {\caption@refstepcounter{#2}% \caption@makecurrent{#2}{#3}}% \caption@addcontentsline{#2}{#3}% \@esphack} % \end{macrocode} % \end{macro} % % \section{\cs{captionbox}} % % \begin{macro}{\captionbox} % \changes{v3.2}{2010/12/17}{This macro added} % \changes{v3.2a}{2011/08/16}{\cs{captionsetup} replaces with \cs{captionbox@settype} and \cs{caption@setposition}} % \changes{v3.3}{2012/04/09}{Adapted to revised version of \cs{caption@withoptargs}} % \changes{v3.3}{2017/03/19}{When used with fixed witdh the content will not be hboxed anymore} % \changes{v3.3c}{2019/09/01}{Adapted so it could be used by \cs{subfloat} offered by \package{subcaption}} % \changes{v3.5}{2020/07/28}{Adapted to \package{caption3} v2.0} % A |\parbox| with contents and caption, separated by an invisible |\hrule|. % \begin{macrocode} \newcommand*\captionbox{% \caption@withoptargs{\caption@ibox\@gobble}} % \end{macrocode} % \begin{macrocode} \newcommand\caption@ibox[3]{% \kernel@ifnextchar[%] {\caption@iibox{#1}{#2}{#3}}% {\caption@iibox@{#1}{#2}{#3}}} % \end{macrocode} % \begin{macrocode} \long\def\caption@iibox#1#2#3[#4]{% \@testopt{\caption@iiibox{#1}{#2}{#3}[{#4}]}\captionbox@innerpos@default} % \end{macrocode} % \begin{macrocode} \long\def\caption@iibox@#1#2#3#4{% \setbox\@tempboxa\hbox{#4}% \caption@iiibox{#1}{#2}{#3}[\wd\@tempboxa][\captionbox@innerpos@default]{\unhbox\@tempboxa}} % \end{macrocode} % \begin{macrocode} \long\def\caption@iiibox#1{% \caption@iiiibox{#1}\vbox\vtop} % \end{macrocode} % \begin{macrocode} \long\def\caption@iiiibox#1#2#3#4#5[#6][#7]#8{% \begingroup #1*% set \caption@position \caption@iftop{% \endgroup \parbox[t]{#6}{% #1\relax \caption@setposition t% #2{\caption#4{#5}}% \captionbox@hrule \csname caption@justification@#7\endcsname #8}% }{% \endgroup \parbox[b]{#6}{% #1\relax \caption@setposition b% \csname caption@justification@#7\endcsname #8% \captionbox@hrule #3{\caption#4{#5}}}% }} % \end{macrocode} % \begin{macrocode} \newcommand*\captionbox@innerpos@default{c} \newcommand*\captionbox@hrule{\hrule\@height\z@\relax} % \end{macrocode} % \begin{macrocode} \providecommand*\caption@justification@c{\centering} \providecommand*\caption@justification@l{\raggedright} \providecommand*\caption@justification@r{\raggedleft} \providecommand*\caption@justification@s{} % \end{macrocode} % \end{macro} % % \section{\cs{continuedfloat}} % % \begin{macro}{\continuedfloat} % \changes{v3.0i}{2005/11/12}{Optional argument added} % \changes{v3.0g}{2005/06/28}{Bugfix: \cs{newcounter} replaced by \cs{newcount}} % \changes{v3.1}{2007/07/02}{Format of \package{hyperref} extension changed} % \changes{v3.1}{2007/07/07}{\cs{caption@setoptions} added} % \changes{v3.1g}{2008/01/29}{Starred variant added} % \changes{v3.2f}{2011/12/17}{Undocumented optional argument removed} % \changes{v3.3}{2011/12/28}{Uses \cs{ifcaption@ContinuedFloat} now} % \changes{v3.3}{2013/05/01}{Usage of \cs{caption@restorecounters} added} % \changes{v3.3}{2013/12/16}{Bugfix: Does not use \cs{caption@ContinuedFloat} anymore since this breaks \cs{ContinuedFloat} offered by the \package{subfig} package} % \changes{v3.4}{2015/09/16}{Renamed from \cs{ContinuedFloat} to \cs{continuedfloat}} % \changes{v3.5f}{2020/10/06}{Usage of \cs{caption@restorecounters} removed} % |\continuedfloat|\\ % |\continuedfloat*|\par % This mainly sets the appropriate flag, increments the % continuation counter, and executes the given options. % Furthermore we set |\caption@reset|\-|continued|\-|float| to |\@gobble| so the % continuation counter will not be reset to zero inside |\caption@ref|\-|step|\-|counter|.\par % When the \package{hyperref} package is used we have the problem % that the usage of |\continued|\-|float| will create duplicate % hyper links -- |\@current|\-|Href| will be the same for the main float and % the continued ones. So we have to make sure unique labels and references % will be created each time. We do this by extending |\the|\-|H|\-|figure| and % |\the|\-|H|\-|table|, so for continued floats the scheme % \begin{quote}\meta{type}|.|\meta{type \#}|\alph{|\meta{continued \#}|}|\end{quote} % will be used instead of % \begin{quote}\meta{type}|.|\meta{type \#}\quad\quad.\end{quote} % \par{\small(This implementation follows an idea from Steven Douglas Cochran.)} % \Note{This does not help if the \package{hyperref} package option % \texttt{naturalnames=true} is set.} % \begin{macrocode} \def\continuedfloat{% \caption@iftype {\caption@continuedfloat\@captype}% {\caption@Error{\noexpand\continuedfloat outside float}}} % \end{macrocode} % \begin{macrocode} \newcommand*\caption@continuedfloat[1]{% \@ifstar {\caption@@refstepcounter\@captype \caption@@continuedfloat{#1}}% {\caption@continued@float{#1}}} % \end{macrocode} % \begin{macrocode} \newcommand*\caption@continued@float[1]{% \edef\caption@tempa{#1}% \ifx\caption@tempa\caption@CFtype \caption@@continuedfloat{#1}% \else \caption@Error{Continued `#1' after `\caption@CFtype'}% \fi} % \end{macrocode} % \begin{macrocode} \newcommand*\caption@@continuedfloat{% \caption@setflag1% continued float \caption@@@continuedfloat} \newcommand*\caption@@@continuedfloat{% \stepcounter{continuedfloat}% \caption@@@@continuedfloat} % \end{macrocode} % \begin{macrocode} \newcommand*\caption@@@@continuedfloat[1]{% \caption@setoptions{ContinuedFloat}% for compatibility reasons \caption@setoptions{continuedfloat}% \caption@setoptions{continued#1}% \expandafter\l@addto@macro\csname the#1\endcsname\thecontinuedfloat \@ifundefined{theH#1}{}{% \expandafter\l@addto@macro\csname theH#1\endcsname{% \@alph\c@continuedfloat}}% \let\caption@@@@continuedfloat\@gobble} % \end{macrocode} % \begin{macrocode} \newcommand*\caption@CFtype{??} % \end{macrocode} % \end{macro} % % \begin{macro}{\thecontinuedfloat} % \changes{v3.4}{2015/09/16}{Renamed from \cs{theContinuedFloat} to \cs{thecontinuedfloat}} % This one is preset to \cs{@empty}, so usually the continuation counter is not % included in the caption label or references. % \begin{macrocode} \newcounter{continuedfloat} \let\c@ContinuedFloat\c@continuedfloat % defined for compatibility reasons \def\thecontinuedfloat{\theContinuedFloat} \let\theContinuedFloat\@empty % defined for compatibility reasons % \end{macrocode} % \end{macro} % % \begin{macro}{\caption@reset@continuedfloat} % \changes{v3.2f}{2011/12/17}{Redefinition of \cs{continuedfloat} added} % |\caption@reset@continuedfloat|\marg{type}\par % If a continuation counter is defined, we reset it. % (This one will be called inside |\@caption|.) % \begin{macrocode} \newcommand*\caption@reset@continuedfloat[1]{% \xdef\caption@CFtype{#1}% \@stpelt{continuedfloat}} % \end{macrocode} % \end{macro} % % \begin{macro}{\ContinuedFloat} % For compatibility reasons we still support |\Continued|\-|Float|. % \begin{macrocode} \def\ContinuedFloat{\continuedfloat} % defined for compatibility reasons % \end{macrocode} % \end{macro} % % \begin{macro}{\caption@ContinuedFloat} % \changes{v3.0f}{2005/06/11}{This macro added} % \changes{v3.3}{2013/12/16}{Bugfix: Revised and defined with \cs{def} instead of \cs{newcommand}} % |\caption@ContinuedFloat|\marg{type}\par % This one is used by \cs{ContinuedFloat} offered by the \package{subfig} package. % \begin{macrocode} \def\caption@ContinuedFloat{% \let\caption@reset@continuedfloat\@gobble \caption@@@continuedfloat} % \end{macrocode} % \end{macro} % % \section{Internal helpers} % % \begin{macro}{\caption@refstepcounter} % \changes{v3.1}{2007/07/28}{This macro added} % \changes{v3.2}{2010/10/26}{Error message moved from \cs{caption@@@settype} to here} % \changes{v3.2c}{2011/09/04}{Support of \cs{donemaincaptiontrue} from \textsf{memoir} document class added} % \changes{v3.3}{2011/12/28}{Usage of \cs{ifcaption@caption}, \cs{ifcaption@subcaption}, and \cs{ifcaption@ContinuedFloat} added} % \changes{v3.5e}{2020/09/28}{Bugfix in re-definition of \cs{stepcounter}; uses \cs{edef} instead of \cs{def} now} % Increments the float (i.e. |figure| or |table|) counter, % resets the continuation counter, and redefines itself to |\@gobble|. % \begin{macrocode} \newcommand*\caption@refstepcounter[1]{% \@ifundefined{c@#1}% {\caption@Error{No float type '#1' defined}}% {\caption@ref@stepcounter{#1}% % \end{macrocode} % Set flag if this part of the figure (or table) contains a caption now. % (If |\caption@if|\-|top| is not set, |\caption| is at the bottom of this part, % therefore ending this part, so we set the flag to |false| in this case.) % \begin{macrocode} \caption@fixposition % TODO: Make this independant on the "position" setting \caption@iftop\caption@setflag\caption@clrflag2% caption % \end{macrocode} % This part does not contain content (like sub-figures) yet, % so we set |\if|\-|caption@sub|\-|caption| to |false|. % \begin{macrocode} \caption@clrflag4% subcaption % \end{macrocode} % Support of the \textsf{memoir} document class. % \begin{macrocode} \@nameuse{donemaincaptiontrue}}} % \end{macrocode} % \begin{macrocode} \newcommand*\caption@ref@stepcounter{% \caption@ifflag1{% continued float \let\caption@tempa\caption@@refcounter \caption@clrflag1% continued float }{% \let\caption@tempa\caption@@refstepcounter \caption@ifflag2{}{% caption \caption@ifflag4{% subcaption % Counter was already incremented by content, so we suppress \stepcounter{#1} here \let\caption@tempa\caption@@refcounter }{}% }% }% \caption@tempa} % \end{macrocode} % \begin{macrocode} \newcommand*\caption@@refcounter[1]{% \let\caption@stepcounter@ORI\stepcounter \def\stepcounter##1{% \edef\caption@tempa{#1}% \edef\caption@tempb{##1}% \ifx\caption@tempa\caption@tempb \else \caption@stepcounter@ORI{##1}% \fi}% \caption@@@refstepcounter{#1}% \let\stepcounter\caption@stepcounter@ORI} % \end{macrocode} % \begin{macrocode} \newcommand*\caption@@refstepcounter[1]{% \caption@prepare@stepcounter{#1}{ref}% \caption@@@refstepcounter{#1}} % \end{macrocode} % \begin{macrocode} \newcommand*\caption@@stepcounter[1]{% \caption@prepare@stepcounter{#1}{}% \caption@@@stepcounter{#1}} % \end{macrocode} % \begin{macrocode} \newcommand*\caption@prepare@stepcounter[2]{% \caption@addsubcontentslines{#2stepcounter}% \caption@reset@continuedfloat{#1}} % \end{macrocode} % \begin{macrocode} \newcommand*\caption@@@refstepcounter{\refstepcounter} % \end{macrocode} % \begin{macrocode} \newcommand*\caption@@@stepcounter{\stepcounter} % \end{macrocode} % \end{macro} % % \begin{macro}{\caption@dblarg} % \changes{v3.1}{2007/02/05}{This macro added} % \changes{v3.1f}{2007/12/06}{Bugfix 07-12-06: Changed so it works without \cs{kernel@ifnextchar} (which was introduced in \LaTeXe\ 2004/01/23), too} % \changes{v3.3}{2012/03/25}{Support of option \opt{list-entry} added} % A |\relax| was added compared to |\@dblarg| so |\caption{}| will be % expanded to |\caption[\relax]{}| (and not to |\caption[]{}|). % Furthermore support for option \opt{list-entry} was added. % \begin{macrocode} \@ifundefined{kernel@ifnextchar}{\let\kernel@ifnextchar\@ifnextchar}{} % \end{macrocode} % \begin{macrocode} \newcommand\caption@dblarg[1]{% \kernel@ifnextchar[{\caption@ydblarg{#1}}{\caption@xdblarg{#1}}} % \end{macrocode} % \begin{macrocode} \newcommand\caption@xdblarg[2]{% #1[{#2\relax}]{#2}} % \end{macrocode} % \begin{macrocode} \long\def\caption@ydblarg#1[#2]#3{% \caption@iflistheading{#1[{#3}]{#3}}{#1[{#2}]{#3}}} % \end{macrocode} % \end{macro} % % \begin{macro}{\caption@begin} % \changes{v3.0a}{2004/01/23}{\cs{caption@settype} changed to \cs{caption@setfloattype}} % \changes{v3.0e}{2005/04/12}{Check for default label format added} % \changes{v3.0f}{2005/06/11}{Usage of \cs{caption@resetContinuedFloat} added} % \changes{v3.1}{2007/05/09}{Usage of \cs{caption@setfloattype} \& \cs{caption@resetContinuedFloat} removed} % \changes{v3.3}{2011/12/29}{Usage of \cs{caption@fixedposition} removed} % Our handling of |\caption| will always be surrounded by % |\caption@begin| (or |\caption@beginex|) and |\caption@end|.\par % |\caption@begin|\marg{type} performs these tasks: % \begin{enumerate} % \item[1.] Override the |position=| setting, if necessary. % (for example if set to |auto| or used inside a |supertabular|) % \item[2.] Start a new group. % \item[3.] Define |\fnum@|\meta{type} if the caption label format is set % to non-default. % \end{enumerate} % \begin{macrocode} \newcommand*\caption@begin[1]{% \caption@fixposition \begingroup \caption@setfnum{#1}} % \end{macrocode} % \end{macro} % % \begin{macro}{\caption@beginex} % \changes{v3.0b}{2004/05/16}{Support of \opt{listof=} added} % \changes{v3.0l}{2007/02/04}{Takes now 3 args instead of 2, check for empty heading added} % \changes{v3.1}{2007/07/01}{Makes lst-entry now instead of redefining \cs{addcontentsline}} % \changes{v3.2}{2010/10/26}{Bugfix 09-05-15: Setting of \cs{lst@@caption} added} % |\caption@beginex|\marg{type}\marg{list entry}\marg{heading}\par % performs the same tasks as |\caption@begin| and additionally: % \begin{enumerate} % \item[4.] Set |\lst@@caption|, so |\fnum@lstlisting| will include a numbering. % \item[5.] Make an entry in the list-of-whatever. % \item[6.] Set |\caption@ifempty| according argument \meta{heading}. % \end{enumerate} % \begin{macrocode} \newcommand\caption@beginex[3]{% \caption@begin{#1}% \let\lst@@caption\relax \caption@addcontentsline{#1}{#2}% \caption@ifempty{#3}{}} % \end{macrocode} % \end{macro} % % \begin{macro}{\caption@end} % \changes{v3.3}{2011/12/29}{Usage of \cs{caption@fixedposition} removed} % |\caption@end| closes the group. % \begin{macrocode} \newcommand*\caption@end{% \endgroup} % \end{macrocode} % \end{macro} % % \changes{v3.0a}{2004/01/23}{Internal hooks \cs{caption@@begin} \& \cs{caption@@end} added} % \changes{v3.0h}{2005/10/06}{Internal hooks \cs{caption@@begin} \& \cs{caption@@end} removed} % % \begin{macro}{\caption@setfnum} % \changes{v3.1}{2007/03/10}{This macro added} % \changes{v3.5}{2020/08/03}{Adapted to \package{caption3} v2.0} % |\caption@setfnum|\marg{type}\\ % stores the original definition of |\fnum@|\meta{type} in |\caption@fnum@|\meta{type} % and re-defines it according the caption label format set with |label|\-|format=|. % \begin{macrocode} \newcommand*\caption@setfnum[1]{% \@ifundefined{caption@fnum@#1}% {\expandafter\let\csname caption@fnum@#1\expandafter\endcsname\csname fnum@#1\endcsname \@namedef{fnum@#1}{\caption@fnum{#1}}}% {}} % \end{macrocode} % \end{macro} % % \begin{macro}{\caption@normalsize} % \changes{v3.1}{2007/05/05}{This macro and its usage added} % \changes{v3.5}{2020/07/27}{Adapted to \package{caption3} v2.0} % This one will be used by |\@caption| instead of |\normalsize|. % \begin{macrocode} \newcommand*\caption@normalsize{% \caption@font@normal\@unused} % \end{macrocode} % \end{macro} % % \begin{macro}{\caption@setfloatcapt} % Needed for support of the \package{float} package, where the caption will % not be typeset directly, but catched in a |\vbox| called |\@floatcapt| % instead. % \begin{macrocode} \let\caption@setfloatcapt\@firstofone % \end{macrocode} % \end{macro} % % \begin{macro}{\caption@makecurrent} % This one is needed for support of the \package{nameref} and \package{hyperref} package. % \changes{v3.2f}{2012/01/14}{Bugfix: Usage of \cs{caption@gettitle} added} % \begin{macrocode} \newcommand*\caption@makecurrent[1]{\caption@gettitle} % \end{macrocode} % \end{macro} % % \begin{macro}{\caption@makeanchor} % \begin{macro}{\caption@start} % \begin{macro}{\caption@@start} % \begin{macro}{\caption@freezeHref} % \begin{macro}{\caption@defrostHref} % All these are needed for support of the \package{hyperref} package. % \begin{macrocode} \let\caption@makeanchor\@firstofone \let\caption@start\relax \let\caption@@start\relax \let\caption@freezeHref\relax \let\caption@defrostHref\relax % \end{macrocode} % \end{macro} % \end{macro} % \end{macro} % \end{macro} % \end{macro} % % \begin{macro}{\caption@gettitle} % \changes{v3.1}{2007/05/05}{This macro and its usage added} % This one is needed for support of the \package{nameref} package. % \begin{macrocode} \newcommand\caption@gettitle[1]{% \caption@ifdefined\NR@gettitle {\NR@gettitle{#1}}% {\def\@currentlabelname{#1}}} % \end{macrocode} % \end{macro} % % \section{Support for sub-captions} % \changes{v3.1f}{2007/11/16}{Support for sub-captions added} % % \begin{macro}{\caption@subtypehook} % \changes{v3.1g}{2008/03/20}{Redefinition of \cs{caption@setlist} added} % \changes{v3.1k}{2009/10/09}{Bugfix 09-08-12b: \cs{@makecaption} will now be restored here, too} % \changes{v3.2}{2011/06/26}{Uses \cs{caption@@addcontentsline} instead of \cs{addcontentsline} now} % \changes{v3.2a}{2011/08/17}{Redefinition of \cs{phantomcaption} added} % \changes{v3.2a}{2011/08/17}{Usage of \cs{caption@warmup} added} % \changes{v3.2c}{2011/09/30}{Bugfix 11-09-26: Usage of \cs{if@subfloatrow} added} % \changes{v3.3}{2011/12/28}{Bugfix 11-12-16: \cs{caption@l@stepcounter} replaced by \cs{stepcounter}} % \changes{v3.3}{2012/03/15}{Usage of \cs{caption@setbox} added} % \changes{v3.3}{2013/05/01}{Redefinition of \cs{caption@settype} added} % \changes{v3.3}{2013/06/17}{Missing redefinition of \cs{captionlistentry} added} % \changes{v3.3}{2018/09/06}{Adapted to the \package{chkfloat} package} % \changes{v3.4f}{2020/01/03}{Redefinition of \cs{@caption} added since it was redefined by the \env{threeparttable} environment} % \changes{v3.5}{2020/07/27}{Adapted to \package{caption3} v2.0} % Hook, will be used inside \cs{caption@setsubtype}.\par % (Note: If we are inside an |sub|\-|float|\-|row| environment we have to keep % the |\@make|\-|caption| code of the \package{floatrow} package intact.) % \begin{macrocode} \newcommand*\caption@subtypehook{% \ifx\caption\caption@subcaption \else \caption@warmup % \end{macrocode} % \begin{macrocode} \caption@ifflag2{}{% caption % no \caption in this part of the (floating) environment yet \let\caption@add@contentsline\caption@addsubcontentsline \let\caption@addsubcontentslines\@gobble \caption@ifflag4{}{% subcaption % no \subcaption in this part of the (floating) environment yet \caption@ifflag1{% continued float \caption@clrflag1% }{% \caption@@stepcounter\@captype }% \caption@setflag4% subcaption }% }% % \end{macrocode} % \begin{macrocode} \c@continuedfloat=0\relax \let\caption@setfloatcapt\@firstofone \let\caption@chkfloat\@gobbletwo % \end{macrocode} % \begin{macrocode} \caption@set{box}{none}% \caption@clearmargin \caption@iflist{}{\let\caption@setlist\@gobble}% \caption@setoptions{sub}% \caption@setoptions{subfloat}% for subfig-package compatibility % \end{macrocode} % \begin{macrocode} % redefine \setcaptiontype \def\caption@settype{\caption@withoptargs\caption@sub@settype}% \def\caption@sub@settype##1##2{% \edef\caption@tempa{##2}% \ifx\caption@tempa\@captype %%% \caption@setsubtype##1\relax \else \caption@Error{##2 inside \@subcaptype}% \fi}% % \end{macrocode} % \begin{macrocode} % redefine \caption \let\caption\caption@subcaption \let\@caption\caption@@caption \let\phantomcaption\caption@subphantom \let\captionlistentry\caption@sublistentry % \let\@captype\@subcaptype \let\caption@refstepcounter\caption@@@refstepcounter % \end{macrocode} % \begin{macrocode} % restore \@makecaption \if@subfloatrow \caption@Debug{Keeping \string\@makecaption}% \else \let\@makecaption\caption@makecaption \fi \fi}% % \end{macrocode} % \end{macro} % % \begin{macro}{\if@subfloatrow} % \changes{v3.2c}{2011/09/30}{This macro added} % This macro tests if we are inside an |sub|\-|float|\-|row| or |sub|\-|float|\-|row*| environment. % \begin{macrocode} \caption@AtBeginDocument{% \caption@ifundefined\@subfloatrowtrue {\newif\if@subfloatrow \caption@ifundefined\subfloatrow {}% {\caption@Debug{Patching subfloatrow environment}% \g@addto@macro\capsubrowsettings{\@subfloatrowtrue}% \g@addto@macro\killfloatstyle{% \ifx\c@FRobj\c@FRsobj\@subfloatrowtrue\fi}}}% {\caption@Debug{\string\if@subfloatrow is already defined}}}% % \end{macrocode} % \end{macro} % % \begin{macro}{\caption@subcaption} % Makes a sub-caption. % \begin{macrocode} \newcommand*\caption@subcaption{% \caption@checkgrouplevel{sub}\subcaption \caption@star {\caption@refstepcounter\@subcaptype}% {\caption@dblarg{\@caption\@subcaptype}}} % \end{macrocode} % \end{macro} % % \begin{macro}{\caption@subphantom} % \changes{v3.2a}{2011/08/17}{This macro added} % Same as |\phantomcaption|, but for sub-captions. % \begin{macrocode} \newcommand*\caption@subphantom{% \caption@checkgrouplevel{sub}\phantomsubcaption \caption@refstepcounter\@subcaptype} % \end{macrocode} % \end{macro} % % \begin{macro}{\caption@sublistentry} % \changes{v3.3}{2013/06/17}{This macro added} % Same as |\captionlistentry|, but for sub-captions. % \begin{macrocode} \newcommand*\caption@sublistentry{% \caption@teststar\@subcaptionlistentry\@firstoftwo\@secondoftwo} % \end{macrocode} % \begin{macrocode} \newcommand*\@subcaptionlistentry[1]{% \@testopt{\caption@listentry{#1}}\@subcaptype} % \end{macrocode} % \end{macro} % % \begin{macro}{caption@clearsubcontentslines} % Clear pending sub-caption list entries. % \begin{macrocode} \newcommand*\caption@clearsubcontentslines{% \global\let\caption@subcontentslines\@empty} % \end{macrocode} % \begin{macrocode} \caption@clearsubcontentslines % \end{macrocode} % \end{macro} % % \begin{macro}{\caption@addsubcontentsline} % \changes{v3.1i}{2008/08/02}{\cs{label}, \cs{index}, and \cs{glossary} are allowed inside the list entry now} % \changes{v3.2}{2011/06/26}{Uses \cs{caption@@addcontentsline} instead of \cs{addcontentsline} now} % \changes{v3.2c}{2011/08/19}{Uses \cs{caption@gobble} instead of \cs{@gobble} now} % \changes{v3.3}{2012/01/15}{Debug message added} % \changes{v3.3}{2013/03/10}{A single \cs{protect} replaced by \cs{noexpand}} % Add a pending sub-caption list entry. % \begin{macrocode} \newcommand*\caption@addsubcontentsline[4]{% \caption@Debug{\string\caption@addsubcontentsline{#1}{#2}}% \begingroup \let\label\caption@gobble \let\index\caption@gobble \let\glossary\caption@gobble \protected@edef\@tempa{\endgroup \noexpand\g@addto@macro\noexpand\caption@subcontentslines{% \noexpand\@namedef{the#2}{\csname the#2\endcsname}% \ifx\@currentHref\@undefined \else \noexpand\def\noexpand\@currentHref{\@currentHref}% \fi \noexpand\caption@@@addcontentsline{#1}{#2}{#3}{#4}}}% \@tempa} % \end{macrocode} % \end{macro} % % \begin{macro}{\flushsubcaptionlistentries} % \changes{v3.3}{2012/01/15}{Renamed from \cs{caption@addsubcontentslines} to \cs{flushsubcaptionlistentries}} % \changes{v3.3}{2013/03/10}{Bugfix: Missing redefinition of \cs{caption@addsubcontentslines} added} % Writes pending sub-caption list entries. % \begin{macrocode} \newcommand*\flushsubcaptionlistentries{% \caption@addsubcontentslines{user}} % \end{macrocode} % \begin{macrocode} \renewcommand*\caption@addsubcontentslines[1]{% \caption@Debug{\string\flushsubcaptionlistentries (#1)}% \begingroup \caption@subcontentslines \endgroup \caption@clearsubcontentslines} % \end{macrocode} % We need to patch \cs{chapter} otherwise a vertical gap will be inserted into % the list prior pending sub-caption list entries. % We do this |\At|\-|Begin|\-|Document| so packages like \package{newfloat} % will not complain about an unknown document class. % \begin{macrocode} \AtBeginDocument{% % \end{macrocode} % \begin{macrocode} \caption@ifdefined\chapter{% \let\caption@chapter@ORI\chapter \def\chapter{% \caption@addsubcontentslines{chapter}\caption@chapter@ORI}}{}% % \end{macrocode} % Same for \cs{appendix}. % \begin{macrocode} \caption@ifdefined\appendix{% \let\caption@appendix@ORI\appendix \def\appendix{% \caption@addsubcontentslines{appendix}\caption@appendix@ORI}}{}% % \end{macrocode} % Flush the list of pending sub-caption list entries at the end of the document. % \begin{macrocode} \caption@addsubcontentslines{AtEndDocument}% % \end{macrocode} % \begin{macrocode} } % \end{macrocode} % \end{macro} % % \section{Babel package support} % % \subsection{The arabic \& farsi babel option} % \changes{v3.5}{2020/08/02}{\package{arabic} babel support addded} % % \begin{macrocode} \caption@IfBabelArabi{% % \end{macrocode} % % The \package{arabicore} package re-defines |\@make|\-|caption|, |\fnum@figure|, and |\fnum@table| % incompatible to the \package{caption} package, therefore we have to restore our resp.~the original definitions here. % % \begin{macrocode} \let\@makecaption\caption@makecaption \def\fnum@figure{\figurename\nobreakspace\thefigure}% \def\fnum@table{\tablename\nobreakspace\thetable}% % \end{macrocode} % % \begin{macrocode} }{} % \end{macrocode} % % \subsection{The frenchle \& frenchpro package} % \changes{v3.0h}{2005/10/03}{\package{frenchle/pro} package support added} % \changes{v3.5}{2020/08/01}{\package{frenchle/pro} package support updated} % % \begin{macrocode} \caption@IfFrenchLe{% % \end{macrocode} % % \begin{macro}{\f@ffrench} % \begin{macro}{\f@tfrench} % |\f@ffrench| and |\f@tfrench| reflect |\fnum@figure| and |\fnum@table| % when used in French mode. These contain additional code which typesets % the caption separator |\caption|\-|separator| instead of the usual colon. % Because this breaks with our |\@make|\-|caption| code we have to remove % this additional code here. % \begin{macrocode} \def\f@ffrench{\ifx\listoffigures\relax\else\figurename~\thefigure\fi}% \def\f@tfrench{\ifx\listoftables\relax\else\tablename~\thetable\fi}% \let\@eatDP\@undefined % \end{macrocode} % \end{macro} % \end{macro} % % Since the \package{frenchle} package overwrites |\@make|\-|caption| (within |\GO|\-|french|), % we need to save it beforehand and restore it afterwards. % \begin{macrocode} \caption@AtBeginDocument{% \let\caption@original@makecaption\@makecaption}% \g@addto@macro\GOfrench{% \let\@makecaption\caption@original@makecaption}% % \end{macrocode} % % \begin{macrocode} }{} % \end{macrocode} % % \subsection{The hungarian \& magyar babel option} % \changes{v3.2}{2009/03/29}{\package{magyar} babel support added} % \changes{v3.3}{2018/08/26}{\package{magyar} babel support revised} % \changes{v3.5}{2020/08/02}{\package{magyar} babel support updated} % % \begin{macrocode} \caption@IfBabelHungarian{% % \end{macrocode} % % Since the \package{magyar} package tends to overwrite |\@make|\-|caption| % we save it beforehand and restore it afterwards. % \Note{Currently it will not be overwritten, caused by a side-effect of a % work-around for the \package{floatrow} package within \package{caption3}.} % % \begin{macrocode} \caption@AtBeginDocument{% \let\caption@original@makecaption\@makecaption}% \caption@ifdefined\extrashungarian{% \addto\extrashungarian{% \let\@makecaption\caption@original@makecaption}}{}% \caption@ifdefined\extrasmagyar{% \addto\extrasmagyar{% \let\@makecaption\caption@original@makecaption}}{}% % \end{macrocode} % % \begin{macrocode} }{} % \end{macrocode} % % \subsection{The latvian babel option} % \changes{v3.5}{2020/08/02}{\package{latvian} babel support updated} % % \begin{macrocode} \caption@IfBabelLatvian{% % \end{macrocode} % % The \package{latvian} package re-defines |\@make|\-|caption| incompatible to the \package{caption} package, % therefore we have to restore our definitions here. % % \begin{macrocode} \let\@makecaption\caption@makecaption % \end{macrocode} % % \begin{macrocode} }{} % \end{macrocode} % % \section{Package support} % \changes{v3.1}{2007/04/11}{Package options `float', `longtable' etc.~are not supported anymore, removed} % % \begin{macro}{\caption@IfPackageLoaded} % \changes{v3.0f}{2005/05/29}{3rd argument \meta{code} added, so no extra check is needed} % \changes{v3.1}{2007/07/04}{Re-written \& renamed from \cs{caption@ifpackage} to \cs{caption@IfPackageLoaded}} % \changes{v3.3}{2018/12/26}{Bugfix: Missing curly braces added} % |\caption@IfPackageLoaded|\marg{package}\oarg{version}\marg{true}\marg{false}\par % Some kind of combination of |\@ifpackageloaded| and |\@ifpackagelater|. % If the \meta{package} is not loaded yet, the check will be (re-)done % |\AtBeginDocument|, so the \meta{package} could be loaded later on, too. % \begin{macrocode} \newcommand\caption@IfPackageLoaded[1]{% \@testopt{\caption@@IfPackageLoaded{#1}}{}} \@onlypreamble\caption@IfPackageLoaded % \end{macrocode} % \begin{macrocode} \long\def\caption@@IfPackageLoaded#1[#2]#3#4{% \@ifpackageloaded{#1}\@firstofone{% \caption@Debug{#1 package is not loaded (yet)\@gobble}% \caption@AtBeginDocument}{% \caption@If@Package@Loaded{#1}[{#2}]{#3}{#4}}} \@onlypreamble\caption@@IfPackageLoaded % \end{macrocode} % \begin{macrocode} \long\def\caption@If@Package@Loaded#1[#2]{% \@ifpackageloaded{#1}{% \caption@InfoNoLine{#1 package is loaded}% \@ifpackagelater{#1}{#2}\@firstoftwo{% \caption@Error{% For a successful cooperation we need at least version\MessageBreak `#2' of package #1,\MessageBreak but only version\MessageBreak `\csname ver@#1.\@pkgextension\endcsname'\MessageBreak is available}% \@secondoftwo}% }{\@secondoftwo}} \@onlypreamble\caption@If@Package@Loaded % \end{macrocode} % \end{macro} % % \begin{macro}{\caption@clearmargin} % \changes{v3.1}{2007/05/05}{This macro and its usage added} % This macro will be used by some package support stuff where the usual % margin setting is not welcome, e.g. in the \package{sidecap} package. % \begin{macrocode} \newcommand*\caption@clearmargin{% \setcaptionmargin\z@ \let\caption@minmargin\@undefined} % \end{macrocode} % \end{macro} % % \begin{macrocode} \caption@setbool{needfreeze}{0} \caption@AtBeginDocument*{% \caption@ifneedfreeze{% % \end{macrocode} % % \begin{macro}{\caption@freezetype} % \changes{v3.3}{2013/05/01}{This macro added} % |\caption@freezetype|\marg{type}\par % Used by the \package{fltpage} \& \package{sidecap} package support. % \begin{macrocode} \newcommand*\caption@freezetype[1]{% \caption@settype*{#1}% \captionsetup*[sub]{hypcap=true}% Note: This is just a (q&d) workaround! \caption@freeze}% % \end{macrocode} % \end{macro} % % \begin{macro}{\caption@freeze} % \changes{v3.1}{2007/07/22}{This macro added} % \changes{v3.1c}{2007/10/06}{\cs{caption} \& \cs{@caption} revised for enhanced compatibility} % \changes{v3.1c}{2007/10/06}{Bugfix: Made \cs{@caption} long} % \changes{v3.1f}{2007/11/16}{Uses `space hack' instead of \cs{ignorespaces} now} % \changes{v3.1g}{2008/01/29}{Starred variants of \cs{ContinuedFloat} and \cs{captionsetup} added} % \changes{v3.2}{2010/10/26}{Bugfix 10-09-01a: Uses \cs{ignorespaces} instead of `space hack' again} % \changes{v3.2a}{2011/08/17}{Starred variant of \cs{caption@freeze} removed} % \changes{v3.2b}{2011/08/18}{Redefines \cs{caption@setup} instead of \cs{captionsetup} now} % \changes{v3.2b}{2011/08/18}{Redefinition of \cs{label} revised} % \changes{v3.2c}{2011/08/21}{Revised} % \changes{v3.3}{2013/01/06}{Adapted to new switch \cs{caption@caption} etc.} % |\caption@freeze|\par % Used by the \package{bicaption} package. % \begin{macrocode} \newcommand*\caption@freeze{% \let\caption@frozen@continuedfloat\continuedfloat \def\continuedfloat{% \caption@@freeze{\caption@@@@continuedfloat\@captype}% \caption@frozen@continuedfloat}% % \end{macrocode} % \begin{macrocode} \let\caption@frozen@setup\caption@setup \def\caption@setup##1{% \caption@@freeze{\caption@setup{##1}}% \caption@frozen@setup{##1}}% % \end{macrocode} % \begin{macrocode} \let\caption@frozen@caption\caption \def\caption{% \def\caption{% \caption@Error{% Only one \noexpand\caption can be placed in this environment}% \caption@gobble}% \@ifstar {\caption@SC@caption*}% {\let\@currentlabel\caption@SClabel \caption@withoptargs\caption@SC@caption}}% \long\def\caption@SC@caption##1##2{% \caption@@freeze{\caption##1{##2}}% \ignorespaces}% % \end{macrocode} % \begin{macrocode} \let\caption@frozen@label\label \def\label{% \caption@withoptargs\caption@SC@label}% \def\caption@SC@label##1##2{% \ifx\@currentlabel\caption@SClabel \@bsphack \caption@freeze@label{##1}{##2}% \@esphack \else \caption@frozen@label##1{##2}% \fi}% \def\caption@SClabel{\caption@undefinedlabel}% \def\caption@freeze@label##1##2{% \caption@@freeze{\label##1{##2}}}% % \end{macrocode} % \begin{macrocode} \global\let\caption@frozen@content\@empty \long\def\caption@@freeze{% \g@addto@macro\caption@frozen@content}% % \end{macrocode} % \begin{macrocode} \def\caption@warmup{% \let\continuedfloat\caption@frozen@continuedfloat \let\caption@setup\caption@frozen@setup \let\caption\caption@frozen@caption \let\label\caption@frozen@label}}% % \end{macrocode} % \end{macro} % % \begin{macro}{\caption@prepare@defrost} % \changes{v3.3}{2013/01/06}{This macro added} % Prevent resetting the caption flags % \begin{macrocode} \newcommand*\caption@prepare@defrost{% \let\caption@settype\caption@set@type} % \end{macrocode} % \end{macro} % % \begin{macro}{\caption@defrost} % \changes{v3.1}{2007/07/22}{This macro added} % \changes{v3.1g}{2008/01/30}{\cs{caption@defrost@setup} added} % \changes{v3.2c}{2011/08/21}{Adapted to changes of \cs{caption@freeze}} % \changes{v3.2c}{2011/08/21}{\cs{caption@defrost@setup} removed} % |\caption@defrost| % \begin{macrocode} \newcommand*\caption@defrost{% \ifx\caption@frozen@caption\@undefined \caption@frozen@content \else \caption@Error{Internal Error:\MessageBreak \noexpand\caption@defrost in same group as \string\caption@freeze}% \fi}% % \end{macrocode} % \end{macro} % % \begin{macrocode} }{}% \caption@undefbool{needfreeze}} % \end{macrocode} % % \begin{macro}{\caption@warmup} % \changes{v3.2a}{2011/08/17}{This macro added} % |\caption@warmup| % \begin{macrocode} \let\caption@warmup\relax % \end{macrocode} % \end{macro} % % \subsection{The changepage package} % \changes{v3.4k}{2020/05/30}{Patch of the \package{changepage} package added} % % \begin{macrocode} \caption@IfPackageLoaded{changepage}[2008/07/23 memoir-v3.7k]{% % \end{macrocode} % % Both environments, \env{adjustwidth} and \env{adjustwidth*}, are starting a \env{list} \cs{item}. % But \cs{hsize} isn't set properly inside a \env{list} item, and therefore \cs{@makecaption} % (offered by document classes) doesn't work properly when used inside \env{adjustwidth}. % Therefore we try to detect the situation ``Are we inside a adjustwidth environment?'' % inside \cs{@makecaption} and fix this. (Sigh!) % % We cannot simply set and test a flag here since our adjustment to \cs{hsize} should % not be done within a \cs{parbox} within a adjustwidth environment for example, % and therefore we store \cs{hsize} and \cs{linewidth}, and test \cs{hsize} and \cs{linewidth} % against the stored values instead. If they are equal we are (hopefully) quite save % to assume that we are now inside a plain \env{adjustwidth} environment and therefore need % to fix \cs{hsize} before typesetting the caption. (Deep sigh!) % % \begin{macro}{\caption@adjustwidth@hsize} % \begin{macro}{\caption@adjustwidth@linewidth} % \begin{macrocode} \newdimen\caption@adjustwidth@hsize \newdimen\caption@adjustwidth@linewidth % \end{macrocode} % \end{macro} % \end{macro} % % \begin{macro}{\caption@set@adjustwidth} % \changes{v3.4k}{2020/05/30}{This macro and its usage added} % Store the values of \cs{hsize} and \cs{linewidth}. % \begin{macrocode} \providecommand*\caption@set@adjustwidth{% \caption@adjustwidth@hsize\hsize \caption@adjustwidth@linewidth\linewidth}% % \end{macrocode} % \begin{macrocode} \providecommand*\caption@patch@changepage[1]{% \expandafter\let\csname caption@#1\expandafter\endcsname\csname #1\endcsname \expandafter\renewcommand\csname #1\endcsname[2]{% \@nameuse{caption@#1}{##1}{##2}% \caption@set@adjustwidth}}% \caption@patch@changepage{adjustwidth}% \caption@patch@changepage{adjustwidth*}% \let\caption@patch@changepage\relax % \end{macrocode} % \end{macro} % % \begin{macro}{\caption@test@adjustwidth} % \changes{v3.4k}{2020/05/30}{This macro and its usage added} % Test if the values of \cs{hsize} and \cs{linewidth} are identical to % the ones stored in the \env{adjustwidth} environment. % If yes, set \cs{hsize} to the correct value. % \begin{macrocode} \providecommand\caption@test@adjustwidth{% \ifdim\hsize=\caption@adjustwidth@hsize \ifdim\linewidth=\caption@adjustwidth@linewidth \hsize=\linewidth \fi \fi}% % \end{macrocode} % \begin{macrocode} \AtBeginCaption{\caption@test@adjustwidth}% % \end{macrocode} % \end{macro} % % \begin{macrocode} }{}% % \end{macrocode} % % \subsection{The chkfloat package} % \changes{v3.3}{2018/09/06}{Support of the \package{chkfloat} package added} % % \begin{macrocode} \caption@IfPackageLoaded{chkfloat}[2012/08/19 v0.1]{% % \end{macrocode} % % \begin{macro}{\caption@chkfloat} % \changes{v3.3}{2018/09/06}{This macro added} % \begin{macrocode} \caption@ifdefined\chkfloat@addcontentsline{% \renewcommand\caption@chkfloat{\chkfloat@addcontentsline}% }{% \renewcommand\caption@chkfloat[2]{% \caption@ifdefined\chkfloat@page{% \addtocontents{fof}{\protect\chkfloat@{\thepage}{\chkfloat@page}{\csname fnum@#1\endcsname: #2}}% }{}}% }% % \end{macrocode} % \end{macro} % % \begin{macrocode} }{}% % \end{macrocode} % % \subsection{The float package} % \changes{v3.0f}{2005/05/31}{\package{float} package support rewritten and improved} % \iffalse % (This is a more straight-ahead implementation, but it only works with v1.3 % now, so v1.2 is no longer supported. The old code including documentation % can be found in caption-30f-050530.zip) % \fi % % The \package{float} package usually do not use the \LaTeX\ kernel command % |\@caption| to typeset the caption but |\float@caption| instead. % (|\@caption| will only be used if the float is re-styled with % |\restylefloat*|.) % % The main two things |\float@caption| is doing different are: % \begin{itemize} % \item The caption will be typeset inside a |\savebox| called |\@floatcapt| % so it can be placed above or below the float contents afterwards. % \item |\@makecaption| will not be used to finally typeset the caption. % Instead |\@fs@capt| will be used which definition is part of the float % style. % (Note that |\@fs@capt| will not typeset any vertical space above or below % the caption; instead this space will be typeset by the float style code % itself.) % \end{itemize} % % \begin{macrocode} \caption@IfPackageLoaded{float}[2001/11/08 v1.3d]{% \@ifpackageloaded{floatrow}{% \caption@If@Package@Loaded{floatrow}[2007/08/24 v0.2a]{}{}% }{% % \end{macrocode} % % \begin{macro}{\@float@setevery} % \changes{v3.1k}{2009/10/09}{Bugfix 08-12-05: \cs{color@begin/endgroup} added % to redefinition of \cs{caption@setfloatcapt}} % \changes{v3.4b}{2019/12/16}{Usage of \cs{caption@float@setname} added} % |\@float@setevery|\marg{float type} is provided by the \package{float} % package; it's called every time a floating environment defined with % |\newfloat| or |\restylefloat| begins. % We use this hook to do some adaptations and to setup the proper caption % style (if defined) and additional settings declared with % |\captionsetup|\oarg{float style}. % \begin{macrocode} \let\caption@ORI@float@setevery\@float@setevery \def\@float@setevery#1{% \float@ifcaption{#1}{% % \end{macrocode} % % First of all we set the caption position to it's proper value by % converting |\@fs@iftopcapt| (which is part of a float style and % controls where the caption will be typeset, above or below the float % contents) to our |position=| setting. % Since the spacing above and below the caption will be done by the float % style and \emph{not} by us this sounds quite useless. But in fact it isn't, % since some packages based on \thispackage\ (like the \package{subfig} % package) could have an interest for this information and therefore use the % |\caption@iftop| macro we provide in our kernel. Furthermore we need this % information for ourself in |\captionof| which uses |\@makecaption| to % finally typeset the caption with skips. % \begin{macrocode} \caption@setposition{\@fs@iftopcapt t\else b\fi}% % \end{macrocode} % % Afterward we redefine |\caption@setfloatcapt| (which will be used inside % |\@caption|) so the caption will be set inside the box |\@floatcapt|, % without extra vertical space. % \begin{macrocode} \renewcommand\caption@setfloatcapt[1]{% \let\@makecaption\caption@@make \global\setbox\@floatcapt\vbox{% \color@begingroup ##1\color@endgroup}}% % \end{macrocode} % % To allow different caption styles for different float styles we also % determine the current float style (e.g. `ruled') and select % a caption style (and additional settings) with the same name, if defined. % \begin{macrocode} \float@getstyle\float@style{#1}% \caption@setstyle*\float@style \caption@setoptions\float@style % \end{macrocode} % % \begin{macrocode} }{}% \caption@float@setname{#1}% \caption@freezeHref % will be defrosted in \float@makebox \caption@ORI@float@setevery{#1}}% % \end{macrocode} % \end{macro} % % \begin{macro}{\float@makebox} % \changes{v3.3}{2013/01/06}{Corrects wrong load order hyperref-float now} % \changes{v3.3}{2013/02/03}{Correction of wrong load order hyperref-float revised} % Redefine |\float@makebox| (only if we are not operating in compatibility mode `v1'). % \begin{macrocode} \caption@AtBeginDocument{\caption@ifcompatibility{}{% % \end{macrocode} % If it was redefined by the \package{hyperref} package, % we need to build on the original definition (and not on the redefined one). % \begin{macrocode} \caption@ifdefined\HyOrg@float@makebox {\let\caption@ORI@float@makebox\HyOrg@float@makebox}% {\let\caption@ORI@float@makebox\float@makebox}% \renewcommand\float@makebox[1]{% \caption@ORI@float@makebox{#1\relax \caption@defrostHref}}% % \end{macrocode} % \begin{macrocode} }}% % \end{macrocode} % \end{macro} % % \begin{macro}{\caption@float@setname} % \changes{v3.1}{2007/07/08}{float package hook added} % \changes{v3.4b}{2019/12/16}{Renamed from \cs{caption@typehook} to \cs{caption@float@setname}} % \LaTeX\ and almost every other packages use % |\|\meta{type}|name| % to provide a macro for the type resp.~environment name -- for example % the command |\figurename| will usually contain the name of the floating % environment |figure|: % \begin{quote} % |\newcommand\figurename{Figure}| % \end{quote} % But the \package{float} package doesn't follow this common naming % convention: % For floats defined with |\newfloat| it uses |\fname@|\meta{type} instead, % which breaks with our code (and with |\autoref| and some other things as % well). % So we have to map the \package{float} package name to the common one here.\par % \Note{If the float was not defined with \cs{newfloat} but with % \cs{restylefloat} instead, \cs{fname@}\meta{type} is not defined.} % \begin{macrocode} \newcommand*\caption@float@setname[1]{% \expandafter\ifx\csname #1name\endcsname\relax \expandafter\let\csname #1name\expandafter\endcsname\csname fname@#1\endcsname \fi}% % \end{macrocode} % \end{macro} % % \changes{v3.0f}{2005/06/26}{Skips of \env{plaintop} and \env{boxed} floats corrected} % \begin{macro}{\fs@plaintop} % \begin{macro}{\fs@boxed} % Since the float styles |plaintop| and |boxed| don't use |\abovecaptionskip| % which could be set with |skip=| (|plaintop| uses |\belowcaptionskip| instead of % |\abovecaptionskip|, and |boxed| uses a fixed space of |2pt|) % we patch the according float style macros here to change this. % \begin{macrocode} \g@addto@macro\fs@plaintop{\def\@fs@mid{\vspace\abovecaptionskip\relax}}% \g@addto@macro\fs@boxed{\def\@fs@mid{\kern\abovecaptionskip\relax}}% % \end{macrocode} % \end{macro} % \end{macro} % % \begin{macro}{\float@getstyle} % \changes{v3.1}{2007/06/10}{This macro added} % |\float@getstyle|\marg{cmd}\marg{type}\par % Determining the float style is not so easy because the only hint % provided by the \package{float} package is the macro % |\fst@|\meta{float type} which points to the macro which represents the % float style. So for example after % \begin{quote} % |\floatstyle{ruled}|\\ % |\newfloat{Program}{tbp}{lop}| % \end{quote} % |\fst@Program| will be defined as % \begin{quote} % |\def\fst@Program{\fs@ruled}|\quad. % \end{quote}\par % So here is what we do: We make the first level expansion of % |\fst@|\meta{float type} a string so we can gobble the first four tokens % (= |\fs@|), so only the the name of the float style is left.\par % \emph{TODO:} We need to convert the catcodes here. % \begin{macrocode} \providecommand*\float@getstyle[2]{% \edef#1{% \noexpand\expandafter\noexpand\@gobblefour\noexpand\string \expandafter\expandafter\expandafter\noexpand \csname fst@#2\endcsname}% \edef#1{#1}% \caption@Debug{floatstyle{#2} = `#1'}}% % \end{macrocode} % \end{macro} % % \begin{macro}{\float@ifcaption} % \changes{v3.1}{2007/06/23}{This macro added} % |\float@ifcaption|\marg{type}\marg{if-clause}\marg{else-clause}\par % Here we determine if the user has used |\newfloat| resp.~|\restylefloat|, % or |\restylefloat*|. % This is quite easy: If |\@float@c@|\meta{captype} is the same as % |\float@caption|, the user has used |\newfloat| or |\restylefloat|, % otherwise we assume he has used |\restylefloat*|. % (This test will fail if some package re-defines |\float@caption|, % so we have to assume that there is no one.) % \begin{macrocode} \providecommand*\float@ifcaption[1]{% \expandafter\ifx\csname @float@c@#1\endcsname\float@caption \expandafter\@firstoftwo \else \expandafter\@secondoftwo \fi}% % \end{macrocode} % \end{macro} % % \begin{macrocode} }}{% \providecommand*\float@ifcaption[1]{\@secondoftwo}% % \clearcaptionsetup{boxed}% used by the floatrow package? } % \end{macrocode} % % The skip between `boxed' floats and their caption defaults to |2pt|. % % \begin{macrocode} \captionsetup[boxed]{skip=2pt} % do not issue a warning when not used % \end{macrocode} % % \changes{v3.0f}{2005/05/26}{\opt{strut=0} added to caption style \opt{ruled}} % \changes{v3.0f}{2005/05/27}{Option \opt{ruled} fixed} % To emulate the `ruled' definition of |\@fs@capt| we provide a caption style % `ruled' with appropriate options. But if the package option |ruled| was % specified, we setup some caption parameters to emulate the behavior % of \thispackage\ \version{1.x} option |ruled| instead, i.e., % the current caption settings will be used, but without margin and without % `single-line-check'. % \begin{macrocode} \caption@ifbool{ruled}{% \captionsetup[ruled]{margin=0pt,minmargin=0,slc=0}% }{% \DeclareCaptionStyle{ruled}{labelfont=bf,labelsep=space,strut=0}% } \caption@undefbool{ruled} % \end{macrocode} % % \subsection{The floatflt package} % \changes{v3.1}{2007/06/10}{Support of the \package{floatflt} package added} % % \begin{macrocode} \caption@IfPackageLoaded{floatflt}[1996/02/27 v1.3]{% % \end{macrocode} % % \begin{macro}{\floatingfigure} % We patch |\floatingfigure| so |\caption@floatflt| will be used. % \begin{macrocode} \let\caption@ORI@floatingfigure\floatingfigure \def\floatingfigure{% \caption@floatflt{figure}% \caption@ORI@floatingfigure}% % \end{macrocode} % \end{macro} % % \begin{macro}{\floatingtable} % Same with |\floatingtable|\ldots % \begin{macrocode} \let\caption@ORI@floatingtable\floatingtable \def\floatingtable{% \caption@floatflt{table}% % \caption@setautoposition b% \caption@ORI@floatingtable}% % \end{macrocode} % \end{macro} % % \begin{macro}{\caption@floatflt} % \changes{v3.1c}{2007/10/06}{Bugfix: \cs{caption@clearmargin} added} % Here we do two things: % \begin{enumerate} % \item We use |\caption@set|\-|options{|\-|floating|\meta{type}|}| so % |\caption|\-|setup[|\-|floating|\meta{type}|]{|\ldots|}| is supported. % \item |\line|\-|width| must be set correctly. % Usually this is done by |\@par|\-|box|\-|restore| inside |\@caption|, % but since we use |\@caption@parbox|\-|restore| we have to map this to % |\@par|\-|box|\-|restore| instead. % \end{enumerate} % \begin{macrocode} \newcommand*\caption@floatflt[1]{% \caption@settype{#1}% \caption@clearmargin \caption@setparboxrestore{full}% \caption@setoptions{floating#1}}% % \end{macrocode} % \end{macro} % % \begin{macrocode} }{} % \end{macrocode} % % \subsection{The fltpage package} % \changes{v3.1}{2007/07/22}{Support of the \package{fltpage} package added} % % \begin{macrocode} \caption@IfPackageLoaded{fltpage}[1998/10/29 v.0.3]{% \caption@setbool{needfreeze}{1}% % \end{macrocode} % % \begin{macro}{\FP@positionLabel} % \changes{v3.2c}{2011/08/28}{This redefinition added} % Original code: % \begin{verbatim} % \newcommand{\FP@positionLabel}{% % FP\@captype-\number\value{FP@\@captype C}-pos} % \end{verbatim}%^^A % \begin{macrocode} \renewcommand\FP@positionLabel{% FP\FP@captype-\number\value{FP@\FP@captype C}-pos}% % \end{macrocode} % \end{macro} % % \begin{macro}{\FP@helpNote} % Original code: % \begin{verbatim} % \newcommand{\FP@helpNote}[2]{% % \typeout{FP#1 is inserted on page \pageref{#2}!}}% % \end{verbatim}%^^A % \begin{macrocode} \renewcommand\FP@helpNote[2]{% \begingroup % save \caption@thepage \caption@pageref{#2}% \typeout{FP#1 is inserted on page \caption@thepage!}% \endgroup}% % \end{macrocode} % \end{macro} % % \begin{macro}{\FP@floatBegin} % \changes{v3.1f}{2007/11/16}{Uses `space hack' instead of \cs{ignorespaces} now} % \changes{v3.1k}{2009/10/09}{Bugfix 09-09-11: Missing \cs{ignorespaces} added} % \changes{v3.2c}{2011/08/28}{Adapted to current version of \cs{caption@freeze}} % \changes{v3.2f}{2012/02/19}{Bugfix 12-02-16: \texttt{minipage} environment added} % \changes{v3.3}{2013/05/01}{Usage of \cs{caption@freeze} replaced by \cs{caption@freezetype}} % Original code: % \begin{verbatim} % \newcommand{\FP@floatBegin}[1]{% % \gdef\@captype{#1}% % \global\let\FP@savedCaptionCommand\caption% % \global\let\FP@savedLabelCommand\label% % \ifthenelse{\equal{\@captype}{figure}} % {\global\let\old@Fnum\fnum@figure}% % {\global\let\old@Fnum\fnum@table}% % \let\FP@LabelText\@empty% % \let\FP@CaptionText\@empty% % \let\FP@optionalCaptionText\@empty% % \renewcommand\label[1]{\gdef\FP@LabelText{##1}}% % \renewcommand\caption[2][]{% % \gdef\FP@optionalCaptionText{##1}\gdef\FP@CaptionText{##2}}% % \begin{lrbox}{\FP@floatCorpusBOX}% % }% % \end{verbatim}%^^A % \begin{macrocode} \renewcommand*\FP@floatBegin[1]{% \def\FP@captype{#1}% \begin{lrbox}{\FP@floatCorpusBOX}% \minipage\hsize % changes from LR mode to vertical mode \caption@freezetype{#1}% \ignorespaces}% % \end{macrocode} % \end{macro} % % \begin{macro}{\FP@floatEnd} % \changes{v3.1g}{2008/01/30}{Some minor bugfixes} % \changes{v3.2c}{2011/08/28}{Adapted to current version of \cs{caption@freeze}} % \changes{v3.2f}{2012/02/19}{Bugfix 12-02-16: \texttt{minipage} environment added} % Original code: % \begin{verbatim} % \newcommand{\FP@floatEnd}{% % \end{lrbox}% % \global\setbox\FP@floatCorpusBOX=\box\FP@floatCorpusBOX % \stepcounter{FP@\@captype C}% % \FP@savedLabelCommand{\FP@positionLabel}% % \FP@helpNote{\@captype}{\FP@positionLabel}% % \FP@float % {\FP@positionLabel}% location label test % {\begin{\@captype}[p!] % \usebox{\FP@floatCorpusBOX}% % \refstepcounter{\@captype}% % \ifthenelse{\equal{\FP@LabelText}{\@empty}} % {}{\FP@savedLabelCommand{\expandafter\protect\FP@LabelText}}% % \end{\@captype}} % {\addtocounter{\@captype}{-1}} % {\begin{\@captype}[b!]% % \ifthenelse{\equal{\FP@guide}{\@empty}}% % {}{\ifthenelse{\equal{\@captype}{figure}}% % {\renewcommand{\fnum@figure}{\old@Fnum\ {\FP@guide}}}% % {\renewcommand{\fnum@table}{\old@Fnum\ {\FP@guide}}}}% % \setlength{\abovecaptionskip}{2pt plus2pt minus 1pt} % length above caption % \setlength{\belowcaptionskip}{2pt plus2pt minus 1pt} % length above caption % \FP@separatorCaption% % \ifthenelse{\equal{\FP@optionalCaptionText}{\@empty}}% % {\FP@savedCaptionCommand{\expandafter\protect\FP@CaptionText}}% % {\FP@savedCaptionCommand[\expandafter\protect\FP@optionalCaptionText]% % {\expandafter\protect\FP@CaptionText}}% % \end{\@captype}}% % }% % \end{verbatim}%^^A % \begin{macrocode} \renewcommand*\FP@floatEnd{% \endminipage \end{lrbox}% % \end{macrocode} % \begin{macrocode} \stepcounter{FP@\FP@captype C}% \caption@label\FP@positionLabel \FP@helpNote\FP@captype\FP@positionLabel % \end{macrocode} % \begin{macrocode} \FP@float {\FP@positionLabel}% location label test {\caption@prepare@defrost \begin\FP@captype[p!]% \usebox\FP@floatCorpusBOX \end\FP@captype}% {\@ifundefined{theH\FP@captype}{}{% \expandafter\l@addto@macro\csname theH\FP@captype\endcsname{.FP}}}% {\caption@prepare@defrost \begin\FP@captype[b!]% \let\FP@savedSetfnumCommand\caption@setfnum \def\caption@setfnum##1{% \FP@savedSetfnumCommand{##1}% \ifx\FP@guide\@empty \else \expandafter\l@addto@macro\csname fnum@##1\endcsname{\ {\FP@guide}}% \fi}% \setlength\abovecaptionskip{2pt plus 2pt minus 1pt}% length above caption \setlength\belowcaptionskip{2pt plus 2pt minus 1pt}% length below caption \caption@setoptions{FP\@captype}% \FP@separatorCaption \caption@defrost \end\FP@captype}% }% % \end{macrocode} % \end{macro} % % \begin{macrocode} }{% \let\caption@ifFPlistcap\@undefined \let\caption@ifFPrefcap\@undefined } % \end{macrocode} % % \subsection{The hyperref package} % \changes{v3.0f}{2005/06/11}{Support of the \package{hyperref} package added} % \changes{v3.1}{2007/03/09}{Usage of \cs{hyper@makecurrent} instead of % \cs{theHfigure} as indicator for \package{hyperref} package} % \changes{v3.2}{2011/07/30}{Test if \package{hyperref} has stopped early revised} % \changes{v3.2c}{2011/08/24}{Test if \package{hyperref} has stopped early adapted to current version of \package{hyperref} package: Usage of \cs{IfHyperBoolean} added} % % \begin{macrocode} \caption@IfPackageLoaded{hyperref}[2003/11/30 v6.74m]{% % Test if hyperref has stopped early \caption@ifundefined\IfHyperBoolean{% \caption@set@bool\caption@ifhyp@stoppedearly0% \caption@ifundefined\H@refstepcounter {\caption@set@bool\caption@ifhyp@stoppedearly1}{% \caption@ifundefined\hyper@makecurrent {\caption@set@bool\caption@ifhyp@stoppedearly1}{% \caption@ifundefined\measuring@true {\caption@set@bool\caption@ifhyp@stoppedearly1}{}}}% }{% \def\caption@ifhyp@stoppedearly{\IfHyperBoolean{stoppedearly}}% }% \caption@ifhyp@stoppedearly{% hyperref has stopped early \caption@InfoNoLine{% Hyperref support is turned off\MessageBreak because hyperref has stopped early}% }{% \g@addto@macro\caption@prepareslc{\measuring@true}% % \end{macrocode} % % \begin{macro}{\caption@@@refstepcounter} % We redefine |\caption@@refstepcounter| so |\H@refstepcounter| will be used % instead of |\refstepcounter| inside |\caption| \& |\captionlistentry|. % \begin{macrocode} \renewcommand*\caption@@@refstepcounter{\H@refstepcounter}% % \end{macrocode} % \end{macro} % % \begin{macro}{\caption@makecurrent} % \changes{v3.1l}{2010/01/09}{Adapted to current version of nameref package} % We redefine |\caption@makecurrent| so a \package{hyperref} label % will be defined inside |\@caption|. % \Note{Will be redefined by \cs{caption@start}.} % \begin{macrocode} \renewcommand*\caption@makecurrent[2]{% \caption@makecurrentHref{#1}% \caption@Debug{hyperref current=\@currentHref}% \caption@gettitle{#2}}% % \end{macrocode} % \begin{macrocode} \newcommand*\caption@makecurrentHref{\hyper@makecurrent}% % \end{macrocode} % \end{macro} % % \begin{macro}{\caption@makeanchor} % \changes{v3.1l}{2010/01/09}{Adapted to the current hyperref package} % We redefine |\caption@makeanchor| so a \package{hyperref} anchor % will be set inside |\@caption|. % \Note{Will be redefined by \cs{caption@start}.} % \begin{macrocode} \renewcommand\caption@makeanchor[1]{% \caption@Debug{hyperref anchor: \@currentHref}% % If we cannot have nesting, the anchor is empty. \ifHy@nesting \expandafter\hyper@@anchor\expandafter{\@currentHref}{#1}% \else \Hy@raisedlink{% \expandafter\hyper@@anchor\expandafter{\@currentHref}{\relax}% }#1% \fi}% % \end{macrocode} % \begin{macrocode} \g@addto@macro\caption@prepareslc{\let\caption@makeanchor\@firstofone}% % \end{macrocode} % \end{macro} % % \paragraph{The hypcap option} % % \begin{macro}{\if@capstart} % Like the \package{hypcap} package we define the switch |\if@capstart|, too. % \begin{macrocode} \newif\if@capstart % \end{macrocode} % \end{macro} % % \begin{macro}{\caption@start} % \changes{v3.0l}{2007/02/20}{% % \cs{caption@currentHref} renamed to \cs{hc@currentHref}} % \changes{v3.1}{2007/06/21}{% % This macro renamed from \cs{capstart} to \cs{caption@start} and revised} % While the \package{hypcap} package defines a macro called |\capstart| % our variant is called |\caption@start| and is controlled by the option % |hypcap=||false|/|true|. % \begin{macrocode} \def\caption@start{\caption@ifhypcap\caption@start@\relax}% \def\caption@start@{% % \end{macrocode} % Generate the \package{hyperref} label and set the \package{hyperref} anchor, % usually (if |hypcap=false|) both is done inside |\@caption|. % \begin{macrocode} \caption@makestart\@captype \caption@startanchor\@currentHref % \end{macrocode} % Prevent |\@caption| from generating a new \package{hyperref} label, % use the label we save in |\hc@currentHref| instead. % (We also support the |@capstart| flag from the \package{hypcap} package.) % \begin{macrocode} \global\@capstarttrue \let\hc@currentHref\@currentHref \def\caption@makecurrentHref##1{% \global\@capstartfalse \global\let\@currentHref\hc@currentHref}% % \end{macrocode} % Prevent |\@caption| from generating a \package{hyperref} anchor since this % has already been done. % \begin{macrocode} \let\caption@makeanchor\@firstofone % \end{macrocode} % \begin{macrocode} }% % \end{macrocode} % \end{macro} % % \begin{macro}{\caption@makestart} % \changes{v3.1c}{2007/09/30}{\cs{@currentHref} will be extended by \texttt{caption} % instead of \texttt{xxx} now} % |\caption@makestart|\marg{type} % defines a \package{hyperref} anchor inside |\caption@start|.\par % Since we offer |\continuedfloat| the float counter can change between % `now' and |\caption|, i.e., we simply don't know the figure or table counter % yet and therefore we are not able to generate the `right' \package{hyperref} % label. % Two different solutions of this problem came into my mind: % \begin{enumerate} % \item I could use the aux file for this purpose.\par % -or- % \item I set |hypertexnames=false| locally. % Furthermore I use |#1.caption.|\meta{counter} (instead of |#1.|\meta{counter}) % as naming scheme for |\@currentHref| to avoid conflicts with other hyper % links which are generated with |hypertexnames=true|. % \end{enumerate} % The first idea has the advantage that the `right' anchor name will be % generated, but one needs an additional \LaTeX\ run if figures or tables % will be inserted or removed.\par % The second idea has the advantage that it's very easy to implement, but % has some side-effects, e.g. the anchor names don't follow the figure or % table label names anymore.\par % Since I'm lazy I implemented the second idea, maybe I will revise this % later on. % \begin{macrocode} \newcommand*\caption@makestart[1]{% \begingroup \Hy@hypertexnamesfalse % \gdef\@currentHlabel{}% \hyper@makecurrent{#1.caption}% \endgroup \caption@Debug{hypcap start=\@currentHref}}% % \end{macrocode} % \end{macro} % % \begin{macro}{\caption@startanchor} % \changes{v3.1b}{2007/09/17}{Bugfix 06-09-17: We use \cs{caption@anchor} instead of \cs{hyper@@anchor}} % \changes{v3.1g}{2008/03/16}{Warning about TeX mode replaced with debug info} % |\caption@startanchor|\marg{Href} % sets a \package{hyperref} anchor inside |\caption@start|.\par % This code was taken from the \package{hypcap} package\cite{hypcap} and adapted. % \Note{Since \cs{hyper@@anchor}\marg{Href}\csmarg{\string\relax} can cause % a change from vertical mode to horizontal mode (design flaw in % \package{hyperref} package!?), and since the workaround % \cs{let}\cs{leavevmode}\cs{relax} which can be found in the % \package{hypcap} package is not always sufficient % (for example with ``Direct pdfmark support'' and \texttt{breaklinks=true}), % we use \cs{caption@anchor} instead of \cs{hyper@@anchor} here.} % \begin{macrocode} \newcommand*\caption@startanchor[1]{% \ifvmode\begingroup \caption@Debug{hypcap anchor: #1 (vertical mode)}% \@tempdima\prevdepth \nointerlineskip \vspace*{-\caption@hypcapspace}% \caption@anchor{#1}% \vspace*{\caption@hypcapspace}% \prevdepth\@tempdima \endgroup\else \caption@Debug{hypcap anchor: #1 (horizontal mode)}% \caption@anchor{#1}% \fi}% % \end{macrocode} % \end{macro} % % \begin{macro}{\caption@anchor} % \changes{v3.1c}{2007/10/17}{Workaround 07-10-17: We use \cs{caption@raisedlink} instead of \cs{Hy@raisedlink} now} % |\caption@anchor|\marg{Href} sets a \package{hyperref} anchor. % \begin{macrocode} \newcommand*\caption@anchor[1]{% \ifmeasuring@ \else \caption@raisedlink{\hyper@anchorstart{#1}\hyper@anchorend}% \fi}% % \end{macrocode} % \Note{Since \cs{Hy@raisedlink} change \cs{@tempdima} we surrounded it by \cs{ifvmode}, % suppressing ``\texttt{LaTeX Warning: Float too large for page by 1.0pt}'' in \texttt{sideways} floats. % (This is not necessary since \package{hyperref} \version{6.77}.)} % \begin{macrocode} \ifx\HyperRaiseLinkLength\@tempdima \def\caption@raisedlink#1{\ifvmode#1\else\Hy@raisedlink{#1}\fi}% \else \let\caption@raisedlink\Hy@raisedlink \fi % \end{macrocode} % \end{macro} % % \begin{macro}{\caption@@start} % Will be used by |\caption@freezeHref|. Apart from that we issue a warning % if we expect a saved \package{hyperref} label coming from |\caption@start|, % but there isn't any. % \begin{macrocode} \def\caption@@start{% \caption@ifundefined\hc@currentHref{% \caption@Warning{% The option `hypcap=true' will be ignored for this\MessageBreak particular \string\caption}}{}}% % \end{macrocode} % \end{macro} % % \begin{macro}{\caption@freezeHref} % Suppress |\caption@start| from generating a \package{hyperref} label and % setting a \package{hyperref} anchor. Instead if |\@caption| generates a % \package{hyperref} label, it will be stored in |\caption@currentHref|. % Furthermore we need to redefine |\caption@setfloatcapt| so no % \package{hyperref} anchor will be placed in |\@caption|. % \iffalse % (Since |\caption@setfloatcapt| will be set to |\@firstofone| inside % |\subcaption| there is no need to add its restauration to % |\caption@subtypehook|.) % \fi % \begin{macrocode} \def\caption@freezeHref{% \let\caption@ORI@start\caption@start \def\caption@start{\let\caption@start\caption@ORI@start}% % \end{macrocode} % \begin{macrocode} % \let\caption@ORI@@start\caption@@start % \l@addto@macro\caption@subtypehook{% % \let\caption@@start\caption@ORI@@start}% % \end{macrocode} % \begin{macrocode} \global\let\caption@currentHref\@undefined \def\caption@@start{\global\let\caption@currentHref\@currentHref}% % \end{macrocode} % \begin{macrocode} \let\caption@ORI@setfloatcapt\caption@setfloatcapt \renewcommand*\caption@setfloatcapt{% \ifx\caption@currentHref\@undefined \else \let\caption@makeanchor\@firstofone \fi \caption@ORI@setfloatcapt}}% % \end{macrocode} % \end{macro} % % \begin{macro}{\caption@defrostHref} % If there is a freezed |\@currentHref|, we set the \package{hyperref} % anchor here. % \begin{macrocode} \def\caption@defrostHref{% \ifx\caption@currentHref\@undefined \else \caption@startanchor\caption@currentHref \global\let\caption@currentHref\@undefined \fi}% % \end{macrocode} % \end{macro} % % \begin{macrocode} }}{} % \end{macrocode} % % \subsection{The hypcap package} % \changes{v3.0f}{2005/06/22}{Support of the \package{hypcap} package added} % \changes{v3.0l}{2007/02/20}{Adapted to \package{hypcap} \version{1.6}} % \changes{v3.1e}{2007/11/04}{\package{hypcap} support adapted to \package{hyperref} \version{6.77}} % % \begin{macrocode} \caption@IfPackageLoaded{hypcap}{% v1.0 \ifx\caption@start\relax \else % hyperref hasn't stopped early % \end{macrocode} % % If the \package{hypcap} package was loaded, we give up our own % hyperlink placement algorithm and give the control over the placement % to the \package{hypcap} package instead. % % \begin{macro}{\capstart} % \changes{v3.1k}{2009/10/09}{Support of \cs{ifcapstart} (\package{hypcap} package \version{1.10}) added} % We do this simply by mapping |\capstart| to |\caption@start@|, % although our code does not behave exactly like the original one: % The original |\capstart| has an effect on the next |\caption| % only but our version affects \emph{all} |\caption|s in the same % environment, at least unless a new |\capstart| will be placed. % \begin{macrocode} \let\caption@ORI@capstart\capstart % save for compatibility mode \caption@ifundefined\capstarttrue % check for v1.10 of hypcap package {\def\capstart{\caption@start@}}% {\def\capstart{\ifcapstart\caption@start@\fi}}% \let\caption@start\relax \let\caption@@start\relax % \end{macrocode} % \end{macro} % % \begin{macro}{\caption@hypcapspace} % Furthermore we map our |\caption@hypcapspace| to |\hypcapspace| % offered by the \package{hypcap} package. % \begin{macrocode} \caption@set@bool\caption@ifhypcap 1% \renewcommand*\caption@hypcapspace{\hypcapspace}% % \end{macrocode} % \end{macro} % % \begin{macrocode} \fi}{} % \end{macrocode} % % \subsection{The listings package} % \changes{v3.0b}{2004/05/16}{Support of the \package{listings} package added} % % \begin{macrocode} \caption@IfPackageLoaded{listings}[2004/02/13 v1.2]{% % \end{macrocode} % % \begin{macro}{\lst@MakeCaption} % \changes{v3.1g}{2008/01/20}{Bugfix: Skips are handled correctly now} % \changes{v3.1k}{2008/03/29}{Bugfix 08-10-16-dctt: \texttt{rule=0} added} % \changes{v3.2}{2010/10/26}{Bugfix 10-07-20a: Set \cs{hsize} to \cs{linewidth}, if necessary} % \changes{v3.4c}{2020/01/01}{Ugly workaround for usage in lists added} % \changes{v3.4d}{2020/01/01}{Ugly workaround for usage in lists revised} % To support the \package{listings} package we need to redefine % |\lst@Make|\-|Caption| so the original stuff is nested with % |\caption@begin| and |\caption@end| etc.\par % We set a flag inside the "Init" hook of the \package{listings} package (where adaption of |\line|\-|width| etc.~takes place). % \begin{macrocode} \caption@setbool{lst@Init}{0}% \lst@AddToHook{Init}{\caption@setbool{lst@Init}{1}}% % \end{macrocode} % \begin{macrocode} \let\caption@ORI@lst@MakeCaption\lst@MakeCaption \def\lst@MakeCaption#1{% #1 is `t' or `b' % \end{macrocode} % This macro is always called twice by the \package{listings} package (with `t' resp. `b' as parameter), % therefore we need an extra group here. % \begin{macrocode} \begingroup % \end{macrocode} % Inside lists the \package{listings} package ignores the left margin (|\@total|\-|left|\-|margin|) for captions. % We emulate this behaviour by adding a negative skip which will be typeset ahead of |\caption@box|.\par % Note: We only need to do this if the ``Init'' hook of the \package{listings} package wasn't called yet. % \begin{macrocode} \caption@iflst@Init{}{% \edef\caption@lst@leftskip{\noexpand\hskip-\the\@totalleftmargin\noexpand\relax}% \l@addto@macro\caption@beginhook\caption@lst@leftskip}% % \end{macrocode} % We set |position=#1| and if it was set to `top', % we swap the skips so the default behavior of the \package{listings} package % will not be changed. (Note that the \package{listings} package has set its % own |\abovecaptionskip| \& |\belowcaptionskip| values prior to calling % \cs{lst@MakeCaption}.) % \begin{macrocode} \caption@setposition{#1}% \caption@iftop{% \@tempdima\belowcaptionskip \belowcaptionskip\abovecaptionskip \abovecaptionskip\@tempdima}{}% % \end{macrocode} % Workaround for issue with wrong skips (FIXME: This should be examined further) % \begin{macrocode} \caption@setup{rule=0}% % \end{macrocode} % Afterwards we set the local `lstlisting' options. % \begin{macrocode} \caption@setoptions{lstlisting}% % \end{macrocode} % If the |position=| is now set to |auto|, we take over the |captionpos=| % setting from the \package{listings} package. % \begin{macrocode} \caption@setautoposition{#1}% % \end{macrocode} % At the end we do similar stuff as in our \cs{@caption} code. % \begin{macrocode} \caption@begin{lstlisting}% \caption@ORI@lst@MakeCaption{#1}% \caption@end % \end{macrocode} % \begin{macrocode} \endgroup}% % \end{macrocode} % \end{macro} % % \begin{macro}{\lst@makecaption} % \begin{macro}{\lst@maketitle} % Wrapper macros for typesetting the |caption=| resp. |title=| value. % \begin{macrocode} \def\lst@makecaption{\caption@starfalse\@makecaption}% \def\lst@maketitle{\caption@startrue\@makecaption\@empty}% % \end{macrocode} % \end{macro} % \end{macro} % % \begin{macro}{\ext@lstlisting} % \changes{v3.1}{2007/03/03}{This macro added} % Since the \package{listings} package do not define |\ext@lstlisting| % but we needed it when |\captionof{lstlisting}| will be done by the end user, % we define it here. % \begin{macrocode} \providecommand*\ext@lstlisting{lol}% % \end{macrocode} % \end{macro} % % \changes{v3.1a}{2007/07/13}{Bugfix 07-09-13: \cs{lst@@caption} will not be re-defined anymore} % % \begin{macrocode} }{} % \end{macrocode} % % \subsection{The longtable package} % % \begin{macro}{\LTcaptype} % \changes{v3.1}{2007/07/06}{This macro and its support added} % |\LTcaptype| is preset to |table|. % \begin{macrocode} \providecommand*\LTcaptype{table} % \end{macrocode} % \end{macro} % % \begin{macro}{\caption@AtBeginLongtable} % \changes{v3.5}{2018/04/15}{This macro added} % \begin{macrocode} \providecommand*\caption@LT@array{} \newcommand\caption@AtBeginLongtable{% \g@addto@macro\caption@LT@array} % \end{macrocode} % \end{macro} % % \begin{macrocode} \caption@IfPackageLoaded{longtable}[1995/05/24 v3.14]{% % \end{macrocode} % \begin{macrocode} \RequirePackage{ltcaption}[2018/08/26]% \let\LT@@makecaption\@undefined % \end{macrocode} % % \begin{macro}{\LT@array} % \changes{v3.1}{2007/07/22}{This redefinition added} % \changes{v3.1a}{2007/09/16}{Bugfix: This redefinition will always be done \cs{AtBeginDocument}} % \changes{v3.1g}{2008/01/20}{Bugfix in \cs{captionlistentry}: Table counter will not be incremented anymore, \cs{nameref} works} % \changes{v3.3}{2016/01/31}{Support for \cs{bicaption} added} % \changes{v3.3}{2018/10/05}{Definition of \cs{captionlistentry} fixed} % \changes{v3.5}{2018/04/15}{Usage of \cs{caption@AtBeginLongtable} added} % We redefine |\LT@array| here to get |\captionsetup|\marg{options} working inside |longtable|s. % \Note{Since the \package{hyperref} package patches \cs{LT@array} as well % and since this only works with the original definition of \cs{LT@array}, % we have to do this after the \package{hyperref} package, i.e.~\cs{AtBeginDocument}.} % \begin{macrocode} \caption@AtBeginDocument{% \let\caption@ORI@LT@array\LT@array \renewcommand*\LT@array{% \caption@LT@array \caption@ORI@LT@array}}% % \end{macrocode} % \begin{macrocode} \caption@AtBeginLongtable{% % |\captionsetup| for longtable: % \begin{macrocode} \global\let\caption@opt@@longtable\@undefined \def\captionsetup{% \noalign\bgroup \@ifstar\@captionsetup\@captionsetup}% gobble * \def\@captionsetup#1{\LT@captionsetup{#1}\egroup}% \def\LT@captionsetup#1{% \captionsetup@startrue\caption@setup@options[@longtable]{#1}% \global\let\caption@opt@@longtable\caption@opt@@longtable}% % \end{macrocode} % |\captionlistentry| for longtable: % \begin{macrocode} \def\captionlistentry{% \noalign\bgroup \@ifstar{\egroup\LT@listentry\LTcaptype}% gobble * {\egroup\LT@listentry\LTcaptype}}% % \end{macrocode} % |\continuedfloat| for longtable:\\ % {\small(Commented out, since it's not deeply tested and quite useless anyway)} % \Note{\package{hyperref} versions $<$ v6.76j uses $2\times$ \cs{hyper@makecurrent}} % \begin{macrocode} % \caption@ifhypcap{% % \let\caption@ORI@hyper@makecurrent\hyper@makecurrent % \def\hyper@makecurrent##1{% % \let\hyper@makecurrent\caption@ORI@hyper@makecurrent % \caption@makestart{##1}% %% \let\Hy@LT@currentHlabel\@currentHlabel % \let\Hy@LT@currentHref\@currentHref % \def\hyper@makecurrent####1{% %% \let\@currentHlabel\Hy@LT@currentHlabel % \let\@currentHref\Hy@LT@currentHref}}% % \let\caption@ORI@continuedfloat\continuedfloat % \def\continuedfloat{\noalign{% % \gdef\caption@setContinuedFloat{% % \let\caption@reset@continuedfloat\@gobble}% % \def\caption@setoptions##1{% % \g@addto@macro\caption@setContinuedFloat{% % \caption@setoptions{##1}}}% % \let\@captype\LTcaptype % \caption@ORI@ContinuedFloat}}% % }{% % \def\continuedfloat{\noalign{% % \caption@Error{% % \noexpand\continuedfloat inside longtables\MessageBreak % is only available with `hypcap=true'}}}% % }% % \global\let\caption@setContinuedFloat\@empty \def\continuedfloat{\noalign{% \caption@Error{\noexpand\continuedfloat outside float}}}% % \end{macrocode} % |\bicaption| for longtable: % \begin{macrocode} \let\bicaption\LT@bicaption % \end{macrocode} % \begin{macrocode} }% % \end{macrocode} % \end{macro} % % \begin{macro}{\LT@capti@n} % \changes{v3.3}{2016/02/01}{This re-definition added} % The original implementation: % \begin{verbatim} % \def\LT@capti@n{% % \@ifstar % {\egroup\LT@c@ption\@gobble[]}% % {\egroup\@xdblarg{\LT@c@ption\@firstofone}}} % \end{verbatim}%^^A % Our implementation uses |\caption@xdblarg| instead of |\@xdblarg|: % \begin{macrocode} \def\LT@capti@n{% \@ifstar {\egroup\LT@c@ption\@gobble[]}% {\egroup\caption@xdblarg{\LT@c@ption\@firstofone}}}% % \end{macrocode} % \end{macro} % % \begin{macro}{\LT@makecaption} % \changes{v3.0d}{2004/08/10}{Bugfix 04-08-04: \cs{abovecaptionskip} \& \cs{belowcaptionskip} will be used now} % \changes{v3.0e}{2005/05/05}{Bugfix: \cs{captionsetup[longtable]} overrides \cs{LTcapwidth} now} % \changes{v3.0h}{2005/10/07}{\cs{caption@LT@make} introduced} % \changes{v3.3}{2016/02/01}{Support for \cs{bicaption} via \cs{caption@LT@setup} added} % \changes{v3.3a}{2019/04/02}{Work-around for problem with \package{floatrow} added} % |\LT@makecaption|\marg{cmd}\marg{label}\marg{text}\par % \smallskip % The original definition: % \begin{verbatim} % \def\LT@makecaption#1#2#3{% % \LT@mcol\LT@cols c{\hbox to\z@{\hss\parbox[t]\LTcapwidth{% % % Based on article class "\@makecaption", "#1" is "\@gobble" in star % % form, and "\@firstofone" otherwise. % \sbox\@tempboxa{#1{#2: }#3}% % \ifdim\wd\@tempboxa>\hsize % #1{#2: }#3% % \else % \hbox to\hsize{\hfil\box\@tempboxa\hfil}% % \fi % \endgraf\vskip\baselineskip}% % \hss}}} % \end{verbatim}%^^A % Our definition: % \begin{macrocode} \renewcommand\LT@makecaption[3]{% \caption@LT@make{% \caption@LT@settype\LTcaptype % \end{macrocode} % |\caption@LT@setup| is re-defined inside the \package{bicaption} package % and contains the preparation of typesetting of the bilingual caption. % \begin{macrocode} \caption@LT@setup % \end{macrocode} % \iffalse % The default |position=| setting for longtables is |top|. % (This emulates the standard behavior of the \package{longtable} package % which has no skip above the caption but a skip below it.) % \fi % |position=auto| is a bad idea for longtables, but we do our very best. % This works quite well for captions inside the longtable contents, but % not for captions inside the longtable (end)foot. % \Note{This should be `top' if unclear!} % \begin{macrocode} \caption@setautoposition{\ifcase\LT@rows t\else b\fi}% % \end{macrocode} % We set |\ifcaption@star| according the 1st argument. % \begin{macrocode} \caption@startrue#1\caption@starfalse % \end{macrocode} % \begin{macrocode} \caption@prepare@stepcounter\LTcaptype{LT}% % \end{macrocode} % \changes{v3.1}{2007/05/05}{\cs{caption@font@normal} added} % \begin{macrocode} \caption@begin\LTcaptype \caption@normalsize % \end{macrocode} % The following skip has the purpose to correct the height of the % |\parbox[t]|. Usually it's the height of the very first line, but % because of our extra skips (|\abovecaptionskip| and |\belowcaptionskip|) % it's always |0pt|.\par % (A different idea would be typesetting the first skip outside the longtable % column with |\noalign{\vskip|\ldots|}|, but this means we have to move % |\caption@begin| to some other place because it does not work in tabular % mode. And at the moment I have no idea on how to do this in an elegant % way\ldots) % \begin{macrocode} \vskip-\ht\strutbox % \end{macrocode} % Work-around for problem with \package{floatrow}: % The |\below|\-|caption|\-|skip| disturbs the environment in which the caption is actually typeset (by creating extra, unwanted space), % so we supress this skip if the \package{floatrow} package is loaded. % (This fixes \issue{50}) % \begin{macrocode} \caption@ifdefined\FBifcaptop{% \let\caption@belowskip\@empty}{}% % \end{macrocode} % The following code should look familiar. We do our skips and use % |\caption@@make| to typeset the caption itself. % \begin{macrocode} \caption@make@above \caption@@make{#2}{#3}\endgraf \caption@make@below \caption@end}}% % \end{macrocode} % \end{macro} % % \begin{macro}{\LT@listentry} % \changes{v3.3}{2018/08/26}{This macro added} % \changes{v3.3}{2018/10/05}{Bugfix: \cs{ignorespaces} added} % \changes{v3.3}{2018/12/26}{Bugfix: Missing curly braces added} % \begin{macrocode} \renewcommand*\LT@listentry[2]{% \begingroup \caption@LT@settype{#1}% \caption@listentry\@firstoftwo[{#1}]{#2}% \endgroup\ignorespaces}% % \end{macrocode} % \end{macro} % % \begin{macro}{\caption@LT@settype} % \changes{v3.3}{2018/08/26}{This macro added} % \changes{v3.3}{2018/10/05}{Uses argument no. 1 instead of \cs{LTcaptype}} % \begin{macrocode} \newcommand*\caption@LT@settype[1]{% \caption@settype*{#1}% % \end{macrocode} % If |\LTcapwidth| is not set to its default value |4in| we assume % that it shall overwrite our own setting. % (But |\captionsetup[longtable]{width=|\ldots|}| will overwrite |\LTcapwidth|.) % \begin{macrocode} \ifdim\LTcapwidth=4in \else \setcaptionwidth\LTcapwidth \fi % \end{macrocode} % \begin{macrocode} \caption@setoptions{longtable}% % \caption@setContinuedFloat % \end{macrocode} % Finally set options applied by |\captionsetup| inside the longtable. % \begin{macrocode} \caption@setoptions{@longtable}}% % \end{macrocode} % \end{macro} % % \begin{macro}{\flrow@setlist} % \changes{v3.4g}{2020/01/03}{Redefinition of this macro added} % The \package{floatrow} package uses |\flrow@setlist{{table}{longtable}}| inside its redefinition of |\LT@array| without setting |\@captype| first, % and this makes |\captionsetup[table]{name=...}| doomed to fail for longtables (``Undefined control sequence''). % Unfortunately we cannot easily patch |\LT@array| again to fix this bug in \package{floatrow} since it will be patched |\AtBeginDocument|. % Therefore we patch |\flrow@setlist| instead to catch and fix the bug on-the-fly. % \begin{macrocode} \caption@AtBeginDocument{\caption@ifdefined\flrow@setlist@{% \caption@InfoNoLine{Fixing longtable code of `floatrow' package}% \let\caption@flrow@setlist@\flrow@setlist@ \renewcommand\flrow@setlist@[1]{% \def\caption@tempa{{table}{longtable}}% \def\caption@tempb{#1}% \ifx\caption@tempa\caption@tempb \def\@captype{table}% \fi \caption@flrow@setlist@{#1}}% }{}}% % \end{macrocode} % \end{macro} % % \begin{macrocode} }{% \let\caption@AtBeginLongtable\@gobble \let\caption@LT@array\@undefined } % \end{macrocode} % % \begin{macro}{\caption@LT@setup} % \changes{v3.3}{2016/02/01}{This macro added} % Hook for stuff which prepares the typesetting of the \package{longtable} caption. % \begin{macrocode} \providecommand*\caption@LT@setup{} % \end{macrocode} % \end{macro} % % \subsection{The picinpar package} % \changes{v3.1}{2007/06/13}{Support of the \package{picinpar} package added} % % \begin{macrocode} \caption@IfPackageLoaded{picinpar}{% % \end{macrocode} % % \begin{macro}{\figwindow} % \begin{macro}{\tabwindow} % The \package{picinpar} package comes with its own caption code % (|\wincaption|, |\@wincaption|, |\@makewincaption|, \ldots) % so we redefine |\figwindow| \& |\tabwindow| to use |\caption| instead. % \begin{macrocode} \long\def\figwindow[#1,#2,#3,#4] {% \caption@window{figure}% \caption@setoptions{figwindow}% \begin{window}[#1,#2,{#3},\caption@wincaption{#4}] }% % \end{macrocode} % \begin{macrocode} \long\def\tabwindow[#1,#2,#3,#4] {% \caption@window{table}% \caption@setoptions{tabwindow}% \begin{window}[#1,#2,{#3},\caption@wincaption{#4}] }% % \end{macrocode} % \end{macro} % \end{macro} % % \begin{macro}{\caption@window} % \changes{v3.1c}{2007/10/06}{Bugfix: \cs{caption@clearmargin} added} % Beside calling |\caption@settype| we redefine |\caption@par|\-|box|\-|restore| % (as in \package{floatflt} \& \package{picins} package support) % and |\@makecaption| (as in \package{float} package support) here. % \begin{macrocode} \newcommand*\caption@window[1]{% \let\@makecaption\caption@@make \caption@setautoposition b% \caption@settype{#1}% \caption@clearmargin \caption@setparboxrestore{full}}% % \end{macrocode} % \end{macro} % % \begin{macro}{\caption@wincaption} % \changes{v3.1d}{2007/10/25}{Missing \% added} % \changes{v3.3}{2013/04/14}{\cs{caption@ContinuedFloattrue} added} % \changes{v3.3}{2018/10/06}{\cs{caption@ContinuedFloattrue} replaced by \cs{caption@setflag1}} % This one finally typesets the caption using |\caption|. % \begin{macrocode} \newcommand\caption@wincaption[1]{% % \end{macrocode} % This will be done twice for every |figwindow| \& |tabwindow| caption -- % on the first run |\picwd| is |0pt|, on the second run |\picwd| is |\hsize|. % \begin{macrocode} \ifdim\picwd=\z@ \let\caption@makecurrent\@gobbletwo \let\caption@@start\relax \caption@prepareslc \else \caption@setflag1% \fi % \end{macrocode} % The argument |#1| could contain simply the caption text % (e.g.~|A figure caption|), but it could also contain an optional argument, % the \meta{lst\_entry} % (e.g.~|[An| |entry| |to| |the| |LOF]||{A| |figure| |caption}|). % Therefore we have to test if |#1| begins with~|[| or not; furthermore we % support a starred variant -- as in |\caption*| -- so we test for~|*|, too. % \begin{macrocode} \edef\@tempa{\expandafter\noexpand\@car#1\@nil}% \if\@tempa*% \let\@tempa\@firstofone \else\if\@tempa[%] \let\@tempa\@firstofone \else \let\@tempa\@empty \fi\fi \expandafter\caption\@tempa{#1}}% % \end{macrocode} % \end{macro} % % \begin{macrocode} }{} % \end{macrocode} % % \subsection{The picins package} % \changes{v3.0j}{2006/01/26}{Support of the \package{picins} package added} % % \begin{macro}{\piccaptiontype} % |\piccaptiontype|\marg{type}\par % We offer this macro for changing the \meta{type} of the caption, so the user % doesn't have to redefine |\@captype|, as proposed in the \package{picins} % documentation. % \Note{We define this macro here so it can be used in the % preamble of the document, even when \thispackage\ was loaded prior to the % \package{picins} package.} % \begin{macrocode} \newcommand*\piccaptiontype[1]{\def\@piccaptype{#1}} % \end{macrocode} % \end{macro} % % \begin{macrocode} \caption@IfPackageLoaded{picins}{% % \end{macrocode} % % Initial set |\@piccaptype| and undefine |\@captype| which was set to % |figure| by the \package{picins} package. % \begin{macrocode} \caption@ifundefined\@piccaptype{% \caption@iftype{% \let\@piccaptype\@captype }{% \def\@piccaptype{figure}% }% }{}% \let\@captype\@undefined % \end{macrocode} % % \begin{macro}{\piccaption} % The original code: % \begin{verbatim} % \def\piccaption{\@ifnextchar [{\@piccaption}{\@piccaption[]}} % \end{verbatim}%^^A % Our code uses |\caption@star| so |\piccaption*| works, % and |\caption@dblarg| so |\piccaption{}| works correctly. % \begin{macrocode} \def\piccaption{\caption@star\relax{\caption@dblarg\@piccaption}}% % \end{macrocode} % \end{macro} % % \begin{macro}{\make@piccaption} % \changes{v3.1}{2007/12/06}{Bugfix: \cs{caption@clearmargin} will always be used now} % The original code: % \begin{verbatim} % \def\make@piccaption{% % [...] % \setbox\@TEXT=\vbox{\hsize\hsiz@\caption[\sh@rtf@rm]{\capti@nt@xt}}% % } % \end{verbatim}%^^A % In our code we have to correct several things: % \begin{enumerate} % \item |\@captype| must be defined, since we have removed the global % definition. % \item We use |\caption@setoptions{parpic}| so % |\captionsetup[parpic]{|\ldots|}| is supported. % \item |\linewidth| must be set correctly. % Usually this is done by |\@parbox|\-|restore| inside |\@caption|, % but since we use |\@caption@parbox|\-|restore| we have to map this to % |\@parbox|\-|restore| instead. % \item The two arguments of |\caption| (|\sh@rtf@rm| \& |\capti@nt@xt|) % should be expanded on first level so |\caption[]{|\ldots|}| and % |\caption[|\ldots|]{}| work correctly. % \end{enumerate} % \begin{macrocode} \let\caption@ORI@make@piccaption\make@piccaption \def\make@piccaption{% \let\caption@ORI\caption % \end{macrocode} % \begin{macrocode} \long\def\caption[##1]##2{% \caption@freezeHref % will be defrosted in \ivparpic \caption@settype\@piccaptype % \ifnum\c@piccaptionpos>2\relax \caption@clearmargin % \else % \captionwidth\z@ % do not use "width=" setting % \fi \caption@setparboxrestore{full}% \caption@setoptions{parpic}% \caption@setautoposition b% % \end{macrocode} % \begin{macrocode} \expandafter\expandafter\expandafter\caption@ORI \expandafter\expandafter\expandafter[% \expandafter\expandafter\expandafter{% \expandafter##1\expandafter}\expandafter]\expandafter{##2}}% % \end{macrocode} % {\footnotesize\begin{quote} % \leavevmode\llap{-or-\quad}%^^A % |\begingroup|\\ % | \toks0\expandafter{##1}| |\toks2\expandafter{##2}|\\ % | \edef\x{\endgroup|\\ % | \noexpand\caption@ORI[{\the\toks0}]{\the\toks2}}|\\ % | \x| % \end{quote} % \begin{quote} % \leavevmode\llap{-or-\quad}%^^A % |\edef\x{%|\\ % | \noexpand\caption@ORI[{\unexpanded\expandafter{##1}}]%|\\ % | {\unexpanded\expandafter{##2}}}|\\ % |\-| % \end{quote}} % \begin{macrocode} \caption@ORI@make@piccaption \let\caption\caption@ORI}% % \end{macrocode} % \end{macro} % % \begin{macro}{\ivparpic} % \changes{v3.3}{2018/12/26}{Bugfix: Missing curly braces added} % We need to set our \package{hyperref} anchor here. % Not bullet-proof since we have to redefine |\noindent| here! % \begin{macrocode} \let\caption@ORI@ivparpic\ivparpic \def\ivparpic(#1,#2)(#3,#4)[#5][#6]#7{% \let\caption@ORI@noindent\noindent \def\noindent{% \caption@defrostHref \let\noindent\caption@ORI@noindent \noindent}% \caption@ORI@ivparpic(#1,#2)(#3,#4)[{#5}][{#6}]{#7}% \let\noindent\caption@ORI@noindent}% % \end{macrocode} % \end{macro} % % \begin{macrocode} }{% \let\piccaptiontype\@undefined } % \end{macrocode} % % \subsection{The rotating package} % % \begin{macrocode} \caption@IfPackageLoaded{rotating}[1995/08/22 v2.10]{% % \end{macrocode} % % \begin{macro}{\rotcaption} % \changes{v3.0c}{2004/07/16}{Bugfix: Check for \cs{caption@star} removed} % \changes{v3.0i}{2005/12/07}{Rewritten, works with \package{hyperref} now} % Make |\rotcaption*| work. % \begin{macrocode} \def\rotcaption{\let\@makecaption\@makerotcaption\caption}% % \let\@rotcaption\@undefined % \end{macrocode} % \end{macro} % % \begin{macro}{\rotcaptionof} % \changes{v3.0i}{2005/12/07}{New} % Make |\rotcaptionof(*)| work. % \begin{macrocode} \def\rotcaptionof{% \caption@teststar\caption@of{\rotcaption*}\rotcaption}% % \end{macrocode} % \end{macro} % % \begin{macro}{\@makerotcaption} % \changes{v3.0i}{2005/12/06}{Rewritten, should finally work proper now} % \changes{v3.0m}{2007/03/04}{Uses \cs{caption@parbox} instead of \cs{caption@start/endbox} now} % \changes{v3.3}{2012/12/26}{Rewritten (again)} % Original (bugfixed) code: % \begin{verbatim} % \long\def\@makerotcaption#1#2{% % \setbox\@tempboxa\hbox{#1: #2}% % \ifdim \wd\@tempboxa > .8\vsize % \rotatebox{90}{% % \begin{minipage}{.8\textheight}#1: #2\end{minipage}% % }%\par % <== \par removed (AR) % \else% % \rotatebox{90}{\box\@tempboxa}% % \fi % \nobreak\hspace{12pt}% <== \nobreak added (AR) % } % \end{verbatim}%^^A % Our version emulates this behavior, but if |width=| is set, % the rotated caption is always typeset as |\parbox|. % (Note that |margin=| is not supported here.) % \begin{macrocode} \long\def\@makerotcaption#1#2{% \rotatebox{90}{% \ifdim\captionwidth=\z@ \setcaptionwidth{.8\vsize}% \l@addto@macro\caption@singleline{% \caption@setup{parbox=none}}% \fi \let\caption@calcmargin\relax \caption@@make{#1}{#2}}% \nobreak\hspace{12pt}}% % \end{macrocode} % \end{macro} % % \begin{macrocode} }{} % \end{macrocode} % % \subsection{The sidecap package} % % \begin{macrocode} \caption@IfPackageLoaded{sidecap}[2003/06/06 v1.6f]{% \caption@setbool{needfreeze}{1}% % \end{macrocode} % % \begin{macro}{\SC@zfloat} % \changes{v3.0b}{2004/05/16}{Local definition of \cs{captionsetup} added} % \changes{v3.0c}{2004/07/16}{Bugfix 04-07-15: Check for \cs{caption@star} removed} % \changes{v3.1c}{2007/10/06}{\cs{caption} will be saved \& restored now} % \changes{v3.2a}{2011/08/17}{Bugfix: Uses \cs{caption@freeze} instead of \cs{caption@freeze*} now} % \changes{v3.3}{2013/05/01}{Usage of \cs{caption@freeze} replaced by \cs{caption@freezetype}} % This macro will be called at the start of the environment, here is a good % opportunity to do some adaptations to |\caption| and |\captionsetup|. % \begin{macrocode} \let\caption@ORI@SC@zfloat\SC@zfloat \def\SC@zfloat#1#2#3[#4]{% % \end{macrocode} % First we use the original definition, but restore \cs{caption} and \cs{label} % so \cs{caption@freeze} and \cs{caption@warmup} will work correctly. % \begin{macrocode} \caption@ORI@SC@zfloat{#1}{#2}{#3}[#4]% \SC@RestoreCommands % \end{macrocode} % Since the sidecap package uses our |\caption| code outside the % environment the regular |\captionsetup| will not work. % So we need a special version here which saves the given argument list % which will be executed later on. % Furthermore we need to make |\caption*| work. % \begin{macrocode} \caption@freezetype{#2}% % \end{macrocode} % The sidecap package uses |\ifx\label\SC@label| to test if it is just inside a % |SC|\-|figure| or not. So we redefine |\SC@label| here so this test will still work. % \begin{macrocode} \let\SC@label\label}% % \end{macrocode} % \begin{macrocode} \providecommand*\SC@RestoreCommands{% \let\caption=\SC@orig@caption \let\label=\SC@orig@label}% % \end{macrocode} % \end{macro} % % \begin{macro}{\endSC@FLOAT} % \changes{v3.0i}{2006/01/12}{\cs{@listdepth}\cs{z@} added} % \changes{v3.1}{2007/05/05}{Call of \cs{caption@setoptions}\arg{SCfloat} added} % This macro will be called at the end of the environment, here we need to % setup our stuff before the \package{sidecap} package actually typesets % its caption. % \begin{macrocode} \let\caption@ORI@endSC@FLOAT\endSC@FLOAT \def\endSC@FLOAT{% % \end{macrocode} % Before we can typeset the caption we need to set the margin to zero % because any extra margin would only be disturbing here.\par % (We don't need to take care about the caption position because % the sidecap package set both |\abovecaptionskip| and |\belowcaptionskip| % to a skip of zero anyway.)\par % Furthermore |\SC@justify| will override the caption justification, if set. % The usage of |\SC@justify| differs from version to version of the % \package{sidecap} package:\par % \begin{tabular}{ll} % Version 1.4: & |\SC@justify| is not defined\\ % Version 1.5: & |\SC@justify| is |\relax| when not set\\ % Version 1.6: & |\SC@justify| is |\@empty| when not set\\ % \end{tabular} % \begin{macrocode} \def\caption@setSC@justify{% \caption@clearmargin \ifx\SC@justify\@empty \else \let\caption@justification\SC@justify \let\SC@justify\@empty \fi}% % \end{macrocode} % Make the original definition of |\endSC@FLOAT| to use our caption % stuff instead of its own. % \Note{At this point the \package{sidecap} definition of \cs{caption} is valid, % not the regular one!} % \begin{macrocode} \let\caption\SC@orig@caption \def\SC@orig@caption[##1]##2{% \caption@setSC@justify %%% \caption@setoptions{SC}% \caption@setoptions{SC\@captype}% \caption@defrost}% % \end{macrocode} % Finally we call the original definition of |\endSC@FLOAT|. % \begin{macrocode} \caption@setSC@justify % for compatibility mode \caption@prepare@defrost \caption@ORI@endSC@FLOAT}% % \end{macrocode} % \end{macro} % % \begin{macrocode} }{} % \end{macrocode} % % \subsection{The subfigure package} % \changes{v3.1}{2007/04/06}{subfigure package support added} % % \begin{macrocode} \caption@IfPackageLoaded{subfigure}[2002/01/23 v2.1]{% % \end{macrocode} % % \begin{macro}{\sf@ifpositiontop} % \changes{v3.1a}{2007/09/15}{Bugfix 07-09-15: Check for \cs{@captype} added} % If the \package{subfigure} package is loaded, we map |\sf@ifpositiontop| % to |\iffiguretopcap| resp. |\iftabletopcap|, so the \package{subfigure} % \version{2.1} options \opt{figbotcap} etc. will still work. % \begin{macrocode} \def\sf@ifpositiontop{% \ifx\@captype\@undefined \expandafter\@gobbletwo \else\ifx\@captype\relax \expandafter\expandafter\expandafter\@gobbletwo \else \expandafter\expandafter\expandafter\sf@if@position@top \fi\fi} % \end{macrocode} % \begin{macrocode} \def\sf@if@position@top{% \@ifundefined{if\@captype topcap}% {\@gobbletwo}% {\@nameuse{if\@captype topcap}% \expandafter\@firstoftwo \else \expandafter\@secondoftwo \fi}} % \end{macrocode} % \end{macro} % % \begin{macrocode} }{} % \end{macrocode} % % \subsection{The supertabular and xtab packages} % % \begin{macrocode} \caption@IfPackageLoaded{supertabular}[2002/07/19 v4.1e]{% % \end{macrocode} % % \begin{macro}{\tablecaption} % \changes{v3.0e}{2005/05/05}{Made \cs{topcaption*} and \cs{bottomcaption*} work} % \changes{v3.1h}{2008/04/01}{Bugfix: Star variant does not increment table counter anymore} % Make |\topcaption*| and |\bottomcaption*| work. % \begin{macrocode} \renewcommand*\tablecaption{% \caption@star {\refstepcounter{table}}% {\caption@dblarg{\@xtablecaption}}}% % \end{macrocode} % \end{macro} % % \begin{macro}{\@xtablecaption} % \changes{v3.1h}{2008/04/01}{Made \cs{nameref} \& \cs{autoref} work} % \changes{v3.1l}{2010/01/09}{Adapted to current version of nameref package} % \changes{v3.3}{2018/12/26}{Bugfix: Missing curly braces added} % Make |\nameref| and |\autoref| work. % \begin{macrocode} \let\caption@ORI@xtablecaption\@xtablecaption \long\def\@xtablecaption[#1]#2{% \caption@gettitle{#2}% \caption@ORI@xtablecaption[{#1}]{#2}}% % \end{macrocode} % \end{macro} % % \begin{macro}{\ST@caption} % \changes{v3.0a}{2004/01/23}{Bugfix: Missing \cs{par} added} % \changes{v3.1h}{2008/04/01}{Bugfix: \cs{@currentlabelname} will be set now} % The original code: % \begin{verbatim} % \long\def\ST@caption#1[#2]#3{\par% % \addcontentsline{\csname ext@#1\endcsname}{#1}% % {\protect\numberline{% % \csname the#1\endcsname}{\ignorespaces #2}} % \begingroup % \@parboxrestore % \normalsize % \if@topcaption \vskip -10\p@ \fi % \@makecaption{\csname fnum@#1\endcsname}{\ignorespaces #3}\par % \if@topcaption \vskip 10\p@ \fi % \endgroup} % \end{verbatim}%^^A % \begin{macrocode} \long\def\ST@caption#1[#2]#3{\par% \caption@settype*{#1}% \caption@setoptions{supertabular}% % \end{macrocode} % The |position=| setting will be overwritten by the % \package{supertabular} package: If |\topcaption| was used, % the position will be |top| automatically, |bottom| otherwise. % \begin{macrocode} \caption@setposition{\if@topcaption t\else b\fi}% % \end{macrocode} % \begin{macrocode} \caption@beginex{#1}{#2}{#3}% \caption@parboxrestore \caption@normalsize \@makecaption{\csname fnum@#1\endcsname}{\ignorespaces #3}\par \caption@end}% % \end{macrocode} % \end{macro} % % \begin{macrocode} }{} % \end{macrocode} % % \changes{v3.1h}{2008/04/01}{Support of the xtab package added} % \begin{macrocode} \caption@IfPackageLoaded{xtab}[2000/04/09 v2.3]{% % \end{macrocode} % % \begin{macro}{\tablecaption} % Make |\topcaption*| and |\bottomcaption*| work. % \begin{macrocode} \renewcommand*\tablecaption{% \caption@star {\refstepcounter{table}}% {\caption@dblarg{\@xtablecaption}}}% % \end{macrocode} % \end{macro} % % \begin{macro}{\@xtablecaption} % \changes{v3.1l}{2010/01/09}{Adapted to current version of nameref package} % \changes{v3.3}{2018/12/26}{Bugfix: Missing curly braces added} % Make |\nameref| and |\autoref| work. % \begin{macrocode} \let\caption@ORI@xtablecaption\@xtablecaption \long\def\@xtablecaption[#1]#2{% \caption@gettitle{#2}% \caption@ORI@xtablecaption[{#1}]{#2}}% % \end{macrocode} % \end{macro} % % \begin{macro}{\ST@caption} % The original code: % \begin{verbatim} % \long\def\ST@caption#1[#2]#3{\par% % \@initisotab % \addcontentsline{\csname ext@#1\endcsname}{#1}% % {\protect\numberline{% % \csname the#1\endcsname}{\ignorespaces #2}}% % \begingroup % \@parboxrestore % \normalsize % %% \if@topcaption \vskip -10\p@ \fi % \@makecaption{\csname fnum@#1\endcsname}{\ignorespaces #3}\par % %% \if@topcaption \vskip 10\p@ \fi % \endgroup % \global\advance\ST@pageleft -\PWSTcapht % \ST@trace\tw@{Added caption. Space left for xtabular: \the\ST@pageleft}} % \end{verbatim}%^^A % \begin{macrocode} \long\def\ST@caption#1[#2]#3{\par% \caption@settype*{#1}% \caption@setoptions{xtabular}% % \end{macrocode} % \begin{macrocode} \caption@set{position}{\if@topcaption t\else b\fi}% % \end{macrocode} % \begin{macrocode} \@initisotab \caption@beginex{#1}{#2}{#3}% \caption@parboxrestore \caption@normalsize \@makecaption{\csname fnum@#1\endcsname}{\ignorespaces #3}\par \caption@end \global\advance\ST@pageleft -\PWSTcapht \ST@trace\tw@{Added caption. Space left for xtabular: \the\ST@pageleft}}% % \end{macrocode} % \end{macro} % % \begin{macrocode} }{} % \end{macrocode} % % \subsection{The threeparttable package} % \changes{v3.1}{2007/05/08}{Support of the \package{threeparttable} package added} % % \begin{macrocode} \caption@IfPackageLoaded{threeparttable}[2003/06/13 v3.0]{% % \end{macrocode} % % \begin{macro}{\threeparttable} % \changes{v3.3}{2016/01/31}{Bugfix: \cs{@captype} will be used if already defined} % Unfortunately |\@captype| is not set when |\TPT@common| will be used, % so we have to redefine |\threeparttable| and |\measuredfigure| instead. % \begin{macrocode} \let\caption@ORI@threeparttable\threeparttable \renewcommand*\threeparttable{% \caption@settype{\@ifundefined{@captype}{table}{\@captype}}% %%% \caption@setposition{auto}% ? \caption@clearmargin \caption@setoptions{threeparttable}% \caption@ORI@threeparttable}% % \end{macrocode} % \end{macro} % \begin{macro}{\measuredfigure} % \changes{v3.3}{2016/01/31}{Bugfix: \cs{@captype} will be used if already defined} % Same here\ldots % \begin{macrocode} \let\caption@ORI@measuredfigure\measuredfigure \renewcommand*\measuredfigure{% \caption@settype{\@ifundefined{@captype}{figure}{\@captype}}% %%% \caption@setposition{auto}% ? \caption@clearmargin \caption@setoptions{measuredfigure}% \caption@ORI@measuredfigure}% % \end{macrocode} % \end{macro} % % \begin{macro}{\TPT@caption} % The original code: % \begin{verbatim} % \def\TPT@caption#1[#2]#3{\gdef\TPT@docapt % {\par\global\let\TPT@docapt\@undefined \TPT@LA@caption{#1}[{#2}]% % {\strut\ignorespaces#3\ifhmode\unskip\@finalstrut\strutbox\fi}}% % \ifx\TPT@hsize\@empty \let\label\TPT@gatherlabel \abovecaptionskip\z@skip % \else \TPT@docapt \fi \ignorespaces} % \end{verbatim}%^^A % \begin{macrocode} \def\TPT@caption#1[#2]#3{% \gdef\TPT@docapt{% \global\let\TPT@docapt\@undefined \caption@setautoposition\caption@TPT@position \TPT@LA@caption{#1}[{#2}]{#3}}% \ifx\TPT@hsize\@empty \let\label\TPT@gatherlabel % Bug: does not work for measuredfigures \gdef\caption@TPT@position{t}% \g@addto@macro\TPT@docapt\caption@TPT@eatvskip \else \def\caption@TPT@position{b}% \TPT@docapt \fi \ignorespaces}% % \end{macrocode} % \begin{macrocode} %\newcommand*\caption@TPT@eatvskip{\vskip-.2\baselineskip}% \def\caption@TPT@eatvskip#1\vskip{#1\@tempdima=}% % \end{macrocode} % \end{macro} % % \begin{macrocode} }{} % \end{macrocode} % % \subsection{The wrapfig package} % \changes{v3.1}{2007/05/05}{Support of the \package{wrapfig} package added} % \changes{v3.2d}{2011/11/02}{Support of the \package{wrapfig} package rewritten} % % \begin{macrocode} \caption@IfPackageLoaded{wrapfig}[2003/01/31 v3.6]{% % \end{macrocode} % % \begin{macro}{\wrapfloat} % \changes{v3.2d}{2011/11/02}{Redefinition of this macro added} % First of all we make the \package{wrapfig} package independent from the package % load order regarding the \package{float} package. % Since the usage of |\@float@set|\-|every| is missing in the code of the \package{wrapfig} % package (it should be in the redefinition of |\float@re|\-|style|, right after % |\@nameuse{fst@#1}|), we don't use it here, too, % especially since |\wrap|\-|float| will usually not be used when used with re-styled floats. % \begin{macrocode} \renewcommand*\wrapfloat[1]{% \def\@captype{#1}% \@ifundefined{fst@#1}{}{% \@nameuse{fst@#1}% % \@float@setevery{#1}% \def\WF@floatstyhook{\let\@currbox\WF@box \global\setbox\WF@box\float@makebox{\wd\WF@box}}}% \@ifnextchar[\WF@wr{\WF@wr[]}} % \end{macrocode} % \end{macro} % % \begin{macro}{\WF@rapt} % \changes{v3.2d}{2011/11/02}{Usage of \cs{WF@captionstyhook} added} % Original code: % \begin{verbatim} % \def\WF@rapt[#1]#2{% final two args: #1 = overhang, #2 = width, % \gdef\WF@ovh{#1}% hold overhang for later, when \width is known % \global\setbox\WF@box\vtop\bgroup \setlength\hsize{#2}% % \ifdim\hsize>\z@ \@parboxrestore \else % \setbox\z@\hbox\bgroup \let\wf@@caption\caption \let\caption\wf@caption % \ignorespaces \fi} % \end{verbatim}%^^A % Our code has |\WF@captionstyhook| in addition: % \begin{macrocode} \def\WF@rapt[#1]#2{% final two args: #1 = overhang, #2 = width, \gdef\WF@ovh{#1}% hold overhang for later, when \width is known \global\setbox\WF@box\vtop\bgroup \setlength\hsize{#2}% \expandafter\WF@captionstyhook\expandafter{\@captype}% <= new \ifdim\hsize>\z@ \@parboxrestore \else \setbox\z@\hbox\bgroup \let\wf@@caption\caption \let\caption\wf@caption \ignorespaces \fi}% % \end{macrocode} % \end{macro} % % \begin{macro}{\WF@captionstyhook} % \changes{v3.2d}{2011/11/02}{This macro added} % \changes{v3.2e}{2011/11/10}{Bugfix 11-11-09: float package support fixed} % We place our \package{hyperref} anchor here, apply the `wrap' options etc. % Since the usage of |\@float@set|\-|every| is missing in the \package{wrapfig} % package we will catch it up here for making the necessary adaptions to the % \package{float} package. % \begin{macrocode} \def\WF@captionstyhook#1{% \let\@captype\@undefined \@ifundefined{fst@#1}{}{\@float@setevery{#1}}% \caption@settype{#1}% \caption@clearmargin %%% \caption@setoptions{wrap}% \caption@setoptions{wrap#1}}% % \end{macrocode} % \end{macro} % % \begin{macrocode} }{} % \end{macrocode} % % \section{That's all Folks!} % % Execute the code declared with |\After|\-|Caption|\-|Package|. % % \begin{macrocode} \caption@endtitles@code \let\caption@endtitles@code\@undefined \let\AfterCaptionPackage\@firstofone % \end{macrocode} % % \iffalse % % \fi % % \iffalse % --------------------------------------------------------------------------- % % \fi % % \clearpage % \begin{thebibliography}{99} % \bibitem{float} % Anselm Lingnau:\\ % \href{http://www.ctan.org/pkg/float}% % {\emph{An Improved Environment for Floats}},\\ % 2001/11/08 % % \bibitem{floatflt} % Mats Dahlgren:\\ % \href{http://www.ctan.org/pkg/floatflt}% % {\emph{Welcome to the floatflt package}},\\ % 1998/06/05 % % \bibitem{floatrow} % Olga Lapko:\\ % \href{http://www.ctan.org/pkg/floatrow}% % {\emph{The floatrow package documentation}},\\ % 2009/08/02 % % \bibitem{fltpage} % Sebastian Gross:\\ % \href{http://www.ctan.org/pkg/fltpage}% % {\emph{Welcome to the beta test of fltpage package!}},\\ % 1998/11/13 % % \bibitem{hyperref} % Sebastian Rahtz \& Heiko Oberdiek:\\ % \href{http://www.ctan.org/pkg/hyperref}% % {\emph{Hypertext marks in \LaTeX: a manual for hyperref}},\\ % November 2012 % % \bibitem{hypcap} % Heiko Oberdiek:\\ % \href{http://www.ctan.org/pkg/oberdiek}% % {\emph{The hypcap package -- Adjusting anchors of captions}},\\ % 2011/02/16 % % \bibitem{listings} % Carsten Heinz \& Brooks Moses:\\ % \href{http://www.ctan.org/pkg/listings}% % {\emph{The Listings Package}},\\ % 2007/02/22 % % \bibitem{longtable} % David Carlisle:\\ % \href{http://www.ctan.org/pkg/longtable}% % {\emph{The longtable package}},\\ % 2004/02/01 % % \bibitem{picinpar} % Friedhelm Sowa:\\ % \href{http://www.ctan.org/pkg/picinpar}% % {\emph{Pictures in Paragraphs}},\\ % July 13, 1993 % % \bibitem{picins} % Joachim Bleser and Edmund Lang:\\ % \href{http://www.ctan.org/pkg/picins}% % {\emph{PicIns-Benutzerhandbuch Version 3.0}},\\ % September~1992 % % \bibitem{rotating} % Sebastian Rahtz and Leonor Barroca:\\ % \href{http://www.ctan.org/pkg/rotating}% % {\emph{A style option for rotated objects in \LaTeX}},\\ % 1997/09/26 % % \bibitem{sidecap} % Rolf Niepraschk \& Hubert G\"a\ss lein:\\ % \href{http://www.ctan.org/pkg/sidecap}% % {\emph{The sidecap package}},\\ % 2003/06/06 % % \bibitem{subfigure} % Steven D. Cochran:\\ % \href{http://www.ctan.org/pkg/subfigure}% % {\emph{The subfigure package}},\\ % 2005/03/15 % % \bibitem{subfig} % Steven D. Cochran:\\ % \href{http://www.ctan.org/pkg/subfig}% % {\emph{The subfig package}},\\ % 2005/07/05 % % \bibitem{supertabular} % Johannes Braams and Theo Jurriens:\\ % \href{http://www.ctan.org/pkg/supertabular}% % {\emph{The supertabular environment}},\\ % 2004/02/20 % % \bibitem{threeparttable} % Donald Arseneau:\\ % \href{http://www.ctan.org/pkg/threeparttable}% % {\emph{Three part tables: title, tabular environment, notes}},\\ % March 5, 2010 % % \bibitem{wrapfig} % Donald Arseneau:\\ % \href{http://www.ctan.org/pkg/wrapfig}% % {\emph{WRAPFIG.STY ver 3.6}},\\ % Jan 31, 2003 % % \bibitem{xtab} % Peter Wilson:\\ % \href{http://www.ctan.org/pkg/xtab}% % {\emph{The xtab package}},\\ % 2011/07/31 % \end{thebibliography} % % \iffalse % --------------------------------------------------------------------------- % % \fi % % \clearpage % \Finale % \endinput