% \iffalse meta-comment
%
% Copyright (C) 1993-2023
% The LaTeX Project and any individual authors listed elsewhere
% in this file.
%
% This file is part of the LaTeX base system.
% -------------------------------------------
%
% It may be distributed and/or modified under the
% conditions of the LaTeX Project Public License, either version 1.3c
% of this license or (at your option) any later version.
% The latest version of this license is in
% https://www.latex-project.org/lppl.txt
% and version 1.3c or later is part of all distributions of LaTeX
% version 2008 or later.
%
% This file has the LPPL maintenance status "maintained".
%
% The list of all files belonging to the LaTeX base distribution is
% given in the file `manifest.txt'. See also `legal.txt' for additional
% information.
%
% The list of derived (unpacked) files belonging to the distribution
% and covered by LPPL is defined by the unpacking scripts (with
% extension .ins) which are part of the distribution.
%
% \fi
%
% \iffalse
% \section{Identification}
%
% These document classes can only be used with \LaTeXe, so we make
% sure that an appropriate message is displayed when another \TeX{}
% format is used.
% \changes{v1.3p}{1995/11/30}{Added date of \LaTeX\ format to argument
% of \cs{NeedsTeXFormat}}
% \begin{macrocode}
%\NeedsTeXFormat{LaTeX2e}[1995/12/01]
% \end{macrocode}
%
% Announce the Class name and its version:
% \begin{macrocode}
%\ProvidesClass{article}
%\ProvidesClass{report}
%\ProvidesClass{book}
%<10pt&!bk>\ProvidesFile{size10.clo}
%<11pt&!bk>\ProvidesFile{size11.clo}
%<12pt&!bk>\ProvidesFile{size12.clo}
%<10pt&bk>\ProvidesFile{bk10.clo}
%<11pt&bk>\ProvidesFile{bk11.clo}
%<12pt&bk>\ProvidesFile{bk12.clo}
%<*driver>
\ProvidesFile{classes.drv}
%
[2022/07/02 v1.4n
% Standard LaTeX document class]
%<10pt|11pt|12pt> Standard LaTeX file (size option)]
% \end{macrocode}
%
% \section{A driver for this document}
%
% The next bit of code contains the documentation driver file for
% \TeX{}, i.e., the file that will produce the documentation you are
% currently reading. It will be extracted from this file by the
% {\sc docstrip} program.
%
% \changes{1.0f}{1993/12/07}{Use class ltxdoc document class}
% \changes{1.0r}{1994/02/28}{Moved driver code in order not to need a
% separate driver}
% \begin{macrocode}
%<*driver>
]
\documentclass{ltxdoc}
% \end{macrocode}
%
% We don't want everything to appear in the index
% \begin{macrocode}
\DoNotIndex{\',\.,\@M,\@@input,\@Alph,\@alph,\@addtoreset,\@arabic}
\DoNotIndex{\@badmath,\@centercr,\@cite}
\DoNotIndex{\@dotsep,\@empty,\@float,\@gobble,\@gobbletwo,\@ignoretrue}
\DoNotIndex{\@input,\@ixpt,\@m,\@minus,\@mkboth}
\DoNotIndex{\@ne,\@nil,\@nomath,\@plus,\roman,\@set@topoint}
\DoNotIndex{\@tempboxa,\@tempcnta,\@tempdima,\@tempdimb}
\DoNotIndex{\@tempswafalse,\@tempswatrue,\@viipt,\@viiipt,\@vipt}
\DoNotIndex{\@vpt,\@warning,\@xiipt,\@xipt,\@xivpt,\@xpt,\@xviipt}
\DoNotIndex{\@xxpt,\@xxvpt,\\,\ ,\addpenalty,\addtolength,\addvspace}
\DoNotIndex{\advance,\ast,\begin,\begingroup,\bfseries,\bgroup,\box}
\DoNotIndex{\bullet}
\DoNotIndex{\cdot,\cite,\CodelineIndex,\cr,\day,\DeclareOption}
\DoNotIndex{\def,\DisableCrossrefs,\divide,\DocInput,\documentclass}
\DoNotIndex{\DoNotIndex,\egroup,\ifdim,\else,\fi,\em,\endtrivlist}
\DoNotIndex{\EnableCrossrefs,\end,\end@dblfloat,\end@float,\endgroup}
\DoNotIndex{\endlist,\everycr,\everypar,\ExecuteOptions,\expandafter}
\DoNotIndex{\fbox}
\DoNotIndex{\filedate,\filename,\fileversion,\fontsize,\framebox,\gdef}
\DoNotIndex{\global,\halign,\hangindent,\hbox,\hfil,\hfill,\hrule}
\DoNotIndex{\hsize,\hskip,\hspace,\hss,\if@tempswa,\ifcase,\or,\fi,\fi}
\DoNotIndex{\ifhmode,\ifvmode,\ifnum,\iftrue,\ifx,\fi,\fi,\fi,\fi,\fi}
\DoNotIndex{\input}
\DoNotIndex{\jobname,\kern,\leavevmode,\let,\leftmark}
\DoNotIndex{\list,\llap,\long,\m@ne,\m@th,\mark,\markboth,\markright}
\DoNotIndex{\month,\newcommand,\newcounter,\newenvironment}
\DoNotIndex{\NeedsTeXFormat,\newdimen}
\DoNotIndex{\newlength,\newpage,\nobreak,\noindent,\null,\number}
\DoNotIndex{\numberline,\OldMakeindex,\OnlyDescription,\p@}
\DoNotIndex{\pagestyle,\par,\paragraph,\paragraphmark,\parfillskip}
\DoNotIndex{\penalty,\PrintChanges,\PrintIndex,\ProcessOptions}
\DoNotIndex{\protect,\ProvidesClass,\raggedbottom,\raggedright}
\DoNotIndex{\refstepcounter,\relax,\renewcommand}
\DoNotIndex{\rightmargin,\rightmark,\rightskip,\rlap,\rmfamily}
\DoNotIndex{\secdef,\selectfont,\setbox,\setcounter,\setlength}
\DoNotIndex{\settowidth,\sfcode,\skip,\sloppy,\slshape,\space}
\DoNotIndex{\symbol,\the,\trivlist,\typeout,\tw@,\undefined,\uppercase}
\DoNotIndex{\usecounter,\usefont,\usepackage,\vfil,\vfill,\viiipt}
\DoNotIndex{\viipt,\vipt,\vskip,\vspace}
\DoNotIndex{\wd,\xiipt,\year,\z@}
% \end{macrocode}
% We do want an index, using line numbers
% \begin{macrocode}
\EnableCrossrefs
\CodelineIndex
% \end{macrocode}
% We use so many \file{docstrip} modules that we set the
% \texttt{StandardModuleDepth} counter to 1.
% \begin{macrocode}
\setcounter{StandardModuleDepth}{1}
% \end{macrocode}
% The following command retrieves the date and version information
% from the file.
% \begin{macrocode}
\GetFileInfo{classes.drv}
% \end{macrocode}
% Some commonly used abbreviations
% \changes{v1.2w}{1994/12/01}{Use \cs{newcommand*}}
% \begin{macrocode}
\newcommand*{\Lopt}[1]{\textsf {#1}}
\newcommand*{\file}[1]{\texttt {#1}}
\newcommand*{\Lcount}[1]{\textsl {\small#1}}
\newcommand*{\pstyle}[1]{\textsl {#1}}
% \end{macrocode}
% We also want the full details.
% \begin{macrocode}
\begin{document}
\DocInput{classes.dtx}
\PrintIndex
% ^^A\PrintChanges
\end{document}
%
% \end{macrocode}
%
% \fi
%
% \changes{v1.0d}{1993/11/30}{remove \cs{@in}, made option makeindex
% a synonym for option makeidx}
% \changes{v1.0d}{1993/11/30}{removed \cs{@minus}, \cs{@plus},
% \cs{@settopoint}, \cs{@setfontsize}; they are now in the
% kernel}
% \changes{v1.0d}{1993/11/30}{Added use of \cs{NeedsTeXFormat}}
% \changes{v1.0d}{1993/11/30}{Replaced \cs{bf} with \cs{bfseries};
% \cs{rm} with \cs{rmfamily}}
% \changes{v1.0d}{1993/11/30}{Made equation and eqnarray environments
% in the fleqn option up to date with latex.dtx}
% \changes{v1.0f}{1993/12/08}{Made all lines shorter than 72 characters}
% \changes{v1.0g}{1993/12/08}{Made change in eqnarray for the fleqn
% option, as suggested by Rainer.}
% \changes{v1.0h}{1993/12/18}{Made the definitions of the font- and
% size-changing commands use \cs{renew} rather than \cs{new}.
% Defined the float parameters with \cs{renewcommand} rather than
% \cs{newcommand}. Corrected some typos in the fleqn option.
% Replaced two occurrences of -\cs{@secpenalty} by
% \cs{@secpenalty}. ASAJ.}
% \changes{v1.0j}{1993/12/20}{Added \cs{ProvidesFile} to size files}
% \changes{v1.0j}{1993/12/10}{Use \cs{cmd} in change entries}
% \changes{v1.0k}{1994/01/09}{Removed some typos/bugs}
% \changes{v1.0l}{1994/01/11}{add the extension to the names of the
% files}
% \changes{v1.0l}{1994/01/10}{Changed version numbering; moved leqno
% and fleqn options to an external file.}
% \changes{v1.0n}{1994/01/19}{Removed code for makeidx option and made
% it a separate package; removed use of \cs{setlength} from list
% parameters.}
% \changes{v1.0o}{1994/01/31}{Small documentation changes}
% \changes{v1.0q}{1994/02/16}{Small documentation changes}
% \changes{v1.1a}{1994/03/12}{Removed \cs{typeout} messages}
% \changes{v1.1f}{1994/04/15}{Inserted forgotten line break}
% \changes{v1.2a}{1994/03/17}{Added openright option. (LL)}
% \changes{v1.2b}{1994/03/17}{Added the \ldots{}matter commands. (LL)}
% \changes{v1.2c}{1994/03/17}{Fixed page numbering in titlepage
% env. (LL)}
% \changes{v1.2d}{1994/04/11}{Checked the file for long lines and
% wrapped them when necessary; made a slight implementation
% modification to the openright and openany options.}
% \changes{v1.2i}{1994/04/28}{Use LaTeX instead of LaTeX2e in messages}
% \changes{v1.2j}{1994/05/01}{Removed the use of \cs{fileversion}
% c.s.}
% \changes{v1.2l}{1994/05/11}{changed some \cs{changes} entries}
% \changes{v1.2m}{1994/05/12}{Forgot a few entries}
% \changes{v1.2o}{1994/05/24}{Changed file information}
% \changes{v1.2p}{1994/05/27}{Moved identification and driver to the
% front of the file}
% \changes{v1.2t}{1994/06/22}{Rephrased a few sentences to prevent
% overfull hboxes}
% \changes{v1.2v}{1994/12/01}{Made the oneside option work for the
% book class}
% \changes{v1.2w}{1994/12/01}{Use \cs{newcommand*} for commands with
% arguments}
% \changes{v1.2z}{1995/05/16}{Always use \cs{cs} in \cs{changes}
% entries}
% \changes{v1.3a}{1995/05/17}{Replaced all \cs{hbox to} by \cs{hb@xt@}}
% \changes{v1.3d}{1995/06/05}{Replaced all \cs{uppercase} by
% \cs{MakeUppercase}}
% \changes{v1.3l}{1995/10/20}{Disabled in compatibility mode all
% options that are new in \LaTeXe.}
% \changes{v1.3v}{1997/06/16}{Documentation fixes.}
% \changes{v1.4j}{2019/08/27}{Various commands made robust}
% \changes{v1.4m}{2020/04/10}{(JLB) prettyprinting the code}
%
%
% \title{Standard Document Classes for \LaTeX{} version 2e\thanks{This
% file has version number \fileversion, last revised \filedate.}}
%
% \author{%
% Copyright (C) 1992 by Leslie Lamport \and
% Copyright (C) 1994-2021 by Frank Mittelbach, \and Johannes Braams and
% the \LaTeX\ Project Team
% }
% \date{\filedate}
% \MaintainedByLaTeXTeam{latex}
% \maketitle
% \tableofcontents
%
% \MaybeStop{} ^^A
%
% \section{The {\sc docstrip} modules}
%
% The following modules are used in the implementation to direct
% {\sc docstrip} in generating the external files:
% \begin{center}
% \begin{tabular}{ll}
% article & produce the documentclass article\\
% report & produce the documentclass report\\
% size10 & produce the class option for 10pt\\
% size11 & produce the class option for 11pt\\
% size12 & produce the class option for 12pt\\
% book & produce the documentclass book\\
% bk10 & produce the book class option for 10pt\\
% bk11 & produce the book class option for 11pt\\
% bk12 & produce the book class option for 12pt\\
% driver & produce a documentation driver file \\
% \end{tabular}
% \end{center}
%
% \section{Initial Code}
%
% In this part we define a few commands that are used later on.
%
% \begin{macro}{\@ptsize}
% This control sequence is used to store the second digit of the
% pointsize we are typesetting in. So, normally, it's value is one
% of 0, 1 or 2.
% \begin{macrocode}
%<*article|report|book>
\newcommand\@ptsize{}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\if@restonecol}
% When the document has to be printed in two columns, we sometimes
% have to temporarily switch to one column. This switch is used to
% remember to switch back.
% \begin{macrocode}
\newif\if@restonecol
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\if@titlepage}
% A switch to indicate if a titlepage has to be produced. For the
% article document class the default is not to make a separate
% titlepage.
% \begin{macrocode}
\newif\if@titlepage
%\@titlepagefalse
%\@titlepagetrue
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\if@openright}
% A switch to indicate if chapters must start on a right-hand page.
% The default for the report class is no; for the book class it's
% yes.
% \begin{macrocode}
%\newif\if@openright
% \end{macrocode}
% \end{macro}
%
% \changes{v1.3k}{1995/08/27}{Macro \cs{if@openbib} removed}
%
% \begin{macro}{\if@mainmatter}
% \changes{v1.2v}{1994/12/01}{Moved the allocation of
% \cs{if@mainmatter} here}
%
% The switch |\if@mainmatter|, only available in the document class
% book, indicates whether we are processing the main material in
% the book.
% \begin{macrocode}
%\newif\if@mainmatter \@mainmattertrue
% \end{macrocode}
% \end{macro}
%
% \section{Declaration of Options}
%
%
% \subsection{Setting Paper Sizes}
%
% The variables |\paperwidth| and |\paperheight| should reflect the
% physical paper size after trimming. For desk printer output this
% is usually the real paper size since there is no post-processing.
% Classes for real book production will probably add other paper
% sizes and additionally the production of crop marks for trimming.
% In compatibility mode, these (and some of the subsequent) options
% are disabled, as they were not present in \LaTeX 2.09.
% \changes{v1.0g}{1993/12/09}{Removed typo, A4 is not 279 mm high}
% \begin{macrocode}
\if@compatibility\else
\DeclareOption{a4paper}
{\setlength\paperheight {297mm}%
\setlength\paperwidth {210mm}}
\DeclareOption{a5paper}
{\setlength\paperheight {210mm}%
\setlength\paperwidth {148mm}}
\DeclareOption{b5paper}
{\setlength\paperheight {250mm}%
\setlength\paperwidth {176mm}}
\DeclareOption{letterpaper}
{\setlength\paperheight {11in}%
\setlength\paperwidth {8.5in}}
\DeclareOption{legalpaper}
{\setlength\paperheight {14in}%
\setlength\paperwidth {8.5in}}
\DeclareOption{executivepaper}
{\setlength\paperheight {10.5in}%
\setlength\paperwidth {7.25in}}
% \end{macrocode}
%
% The option \Lopt{landscape} switches the values of |\paperheight|
% and |\paperwidth|, assuming the dimensions were given for portrait
% paper.
% \begin{macrocode}
\DeclareOption{landscape}
{\setlength\@tempdima {\paperheight}%
\setlength\paperheight {\paperwidth}%
\setlength\paperwidth {\@tempdima}}
\fi
% \end{macrocode}
%
% \subsection{Choosing the type size}
%
% The type size options are handled by defining |\@ptsize| to contain
% the last digit of the size in question and branching on |\ifcase|
% statements. This is done for historical reasons to stay compatible
% with other packages that use the |\@ptsize| variable to select
% special actions. It makes the declarations of size options less
% than 10pt difficult, although one can probably use \texttt{9}
% and \texttt{8} assuming that a class wont define both
% \Lopt{8pt} and \Lopt{18pt} options.
%
% \begin{macrocode}
\if@compatibility
\renewcommand\@ptsize{0}
\else
\DeclareOption{10pt}{\renewcommand\@ptsize{0}}
\fi
\DeclareOption{11pt}{\renewcommand\@ptsize{1}}
\DeclareOption{12pt}{\renewcommand\@ptsize{2}}
% \end{macrocode}
%
%
% \subsection{Two-side or one-side printing}
%
% For two-sided printing we use the switch |\if@twoside|. In
% addition we have to set the |\if@mparswitch| to get any margin
% paragraphs into the outside margin.
% \begin{macrocode}
\if@compatibility\else
\DeclareOption{oneside}{\@twosidefalse \@mparswitchfalse}
\fi
\DeclareOption{twoside}{\@twosidetrue \@mparswitchtrue}
% \end{macrocode}
%
%
% \subsection{Draft option}
%
% If the user requests \Lopt{draft} we show any overfull boxes.
% We could probably add some more interesting stuff to this option.
% \begin{macrocode}
\DeclareOption{draft}{\setlength\overfullrule{5pt}}
\if@compatibility\else
\DeclareOption{final}{\setlength\overfullrule{0pt}}
\fi
% \end{macrocode}
%
% \subsection{Titlepage option}
% An article usually has no separate titlepage, but the user can
% request one.
% \begin{macrocode}
\DeclareOption{titlepage}{\@titlepagetrue}
\if@compatibility\else
\DeclareOption{notitlepage}{\@titlepagefalse}
\fi
% \end{macrocode}
%
% \subsection{openright option}
% This option determines whether or not a chapter must start on
% a right-hand page
% request one.
% \begin{macrocode}
%\if@compatibility
%\@openrighttrue
%\else
%\DeclareOption{openright}{\@openrighttrue}
%\DeclareOption{openany}{\@openrightfalse}
%\fi
% \end{macrocode}
%
% \subsection{Two-column printing}
%
% Two-column and one-column printing is again realized via a switch.
% \begin{macrocode}
\if@compatibility\else
\DeclareOption{onecolumn}{\@twocolumnfalse}
\fi
\DeclareOption{twocolumn}{\@twocolumntrue}
% \end{macrocode}
%
% \subsection{Equation numbering on the left}
%
% The option \Lopt{leqno} can be used to get the equation numbers
% on the left side of the equation. It loads code which is generated
% automatically from the kernel files when the format is built.
% If the equation number does get a special formatting then instead
% of using the kernel file the class would need to provide the code
% explicitly.
% \begin{macrocode}
\DeclareOption{leqno}{\input{leqno.clo}}
% \end{macrocode}
%
% \subsection{Flush left displays}
%
% The option \Lopt{fleqn} redefines the displayed math environments
% in such a way that they come out flush left, with an indentation
% of |\mathindent| from the prevailing left margin. It loads
% code which is generated
% automatically from the kernel files when the format is built.
% \changes{v1.0h}{1993/12/18}{Corrected some typos. ASAJ.}
% \begin{macrocode}
\DeclareOption{fleqn}{\input{fleqn.clo}}
% \end{macrocode}
%
% \subsection{Open bibliography}
%
% The option \Lopt{openbib} produces the ``open'' bibliography
% style, in which each block starts on a new line, and succeeding
% lines in a block are indented by |\bibindent|.
% \changes{v1.3k}{1995/08/27}{openbib option reimplemented}
% \begin{macrocode}
\DeclareOption{openbib}{%
% \end{macrocode}
% First some hook into the bibliography environment is filled.
% \begin{macrocode}
\AtEndOfPackage{%
\renewcommand\@openbib@code{%
\advance\leftmargin\bibindent
\itemindent -\bibindent
\listparindent \itemindent
\parsep \z@
}%
% \end{macrocode}
% In addition the definition of |\newblock| is overwritten.
% \begin{macrocode}
\renewcommand\newblock{\par}}%
}
% \end{macrocode}
%
%
% \section{Executing Options}
%
% Here we execute the default options to initialize certain
% variables. Note that the document class `book' always uses two
% sided printing.
% \begin{macrocode}
%<*article>
\ExecuteOptions{letterpaper,10pt,oneside,onecolumn,final}
%
%<*report>
\ExecuteOptions{letterpaper,10pt,oneside,onecolumn,final,openany}
%
%<*book>
\ExecuteOptions{letterpaper,10pt,twoside,onecolumn,final,openright}
%
% \end{macrocode}
%
% The |\ProcessOptions| command causes the execution of the code
% for every option \Lopt{FOO}
% which is declared and for which the user typed
% the \Lopt{FOO} option in his
% |\documentclass| command. For every option \Lopt{BAR} he typed,
% which is not declared, the option is assumed to be a global option.
% All options will be passed as document options to any
% |\usepackage| command in the document preamble.
% \begin{macrocode}
\ProcessOptions
% \end{macrocode}
% Now that all the options have been executed we can load the
% chosen class option file that contains all size dependent code.
% \begin{macrocode}
%\input{size1\@ptsize.clo}
%\input{bk1\@ptsize.clo}
%
% \end{macrocode}
%
% \section{Loading Packages}
%
% The standard class files do not load additional packages.
%
%
% \section{Document Layout}
% \label{sec:classes:maincode}
%
% In this section we are finally dealing with the nasty typographical
% details.
%
% \subsection{Fonts}
%
% \LaTeX\ offers the user commands to change the size of the font,
% relative to the `main' size. Each relative size changing command
% |\size| executes the command
% |\@setfontsize||\size|\meta{font-size}\meta{baselineskip} where:
%
% \begin{description}
% \item[\meta{font-size}] The absolute size of the font to use from
% now on.
%
% \item[\meta{baselineskip}] The normal value of |\baselineskip|
% for the size of the font selected. (The actual value will be
% |\baselinestretch| * \meta{baselineskip}.)
% \end{description}
%
% A number of commands, defined in the \LaTeX{} kernel, shorten the
% following definitions and are used throughout. They are:
% \begin{center}
% \begin{tabular}{ll@{\qquad}ll@{\qquad}ll}
% \verb=\@vpt= & 5 & \verb=\@vipt= & 6 & \verb=\@viipt= & 7 \\
% \verb=\@viiipt= & 8 & \verb=\@ixpt= & 9 & \verb=\@xpt= & 10 \\
% \verb=\@xipt= & 10.95 & \verb=\@xiipt= & 12 & \verb=\@xivpt= & 14.4\\
% ...
% \end{tabular}
% \end{center}
%
% \begin{macro}{\normalsize}
% \begin{macro}{\@normalsize}
% \changes{v1.0o}{1994/01/31}{\cs{@normalsize} now defined in the
% kernel}
%
% The user level command for the main size is |\normalsize|.
% Internally \LaTeX{} uses |\@normalsize| when it refers to the
% main size. |\@normalsize| will be defined to work like
% |\normalsize| if the latter is redefined from its default
% definition (that just issues an error message). Otherwise
% |\@normalsize| simply selects a 10pt/12pt size.
%
% The |\normalsize| macro also sets new values for\\
% |\abovedisplayskip|, |\abovedisplayshortskip| and
% |\belowdisplayshortskip|.
%
% \changes{v1.0e}{1993/12/07}{\cs{normalsize} doesn't exist, so use
% \cs{newcommand}}
% \changes{v1.0h}{1993/12/18}{\cs{normalsize} is now defined in the
% kernel, so use \cs{renewcommand}. ASAJ.}
% \begin{macrocode}
%<*10pt|11pt|12pt>
\renewcommand\normalsize{%
%<*10pt>
\@setfontsize\normalsize\@xpt\@xiipt
\abovedisplayskip 10\p@ \@plus2\p@ \@minus5\p@
\abovedisplayshortskip \z@ \@plus3\p@
\belowdisplayshortskip 6\p@ \@plus3\p@ \@minus3\p@
%
%<*11pt>
\@setfontsize\normalsize\@xipt{13.6}%
\abovedisplayskip 11\p@ \@plus3\p@ \@minus6\p@
\abovedisplayshortskip \z@ \@plus3\p@
\belowdisplayshortskip 6.5\p@ \@plus3.5\p@ \@minus3\p@
%
%<*12pt>
\@setfontsize\normalsize\@xiipt{14.5}%
\abovedisplayskip 12\p@ \@plus3\p@ \@minus7\p@
\abovedisplayshortskip \z@ \@plus3\p@
\belowdisplayshortskip 6.5\p@ \@plus3.5\p@ \@minus3\p@
%
% \end{macrocode}
% The |\belowdisplayskip| is always equal to the
% |\abovedisplayskip|. The parameters of the first level list are
% always given by |\@listI|.
% \begin{macrocode}
\belowdisplayskip \abovedisplayskip
\let\@listi\@listI}
% \end{macrocode}
%
% We initially choose the normalsize font.
% \begin{macrocode}
\normalsize
% \end{macrocode}
% We use |\MakeRobust| instead of |\DeclareRobustCommand| above to avoid a log
% entry for the redefinition. But if we are running in a rollback situation
% (prior to 2015) we don't touch it.
% \changes{v1.4k}{2019/10/25}{Roll back handling (gh/201)}
% \begin{macrocode}
\ifx\MakeRobust\@undefined \else
\MakeRobust\normalsize
\fi
% \end{macrocode}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\small}
% This is similar to |\normalsize|.
% \changes{v1.0h}{1993/12/18}{\cs{small} is now defined in the kernel,
% so use \cs{renewcommand}. ASAJ.}
% \changes{v1.2e}{1994/04/14}{\cs{small} is no longer defined in the
% kernel; use \cs{newcommand}}
% \begin{macrocode}
\DeclareRobustCommand\small{%
%<*10pt>
\@setfontsize\small\@ixpt{11}%
\abovedisplayskip 8.5\p@ \@plus3\p@ \@minus4\p@
\abovedisplayshortskip \z@ \@plus2\p@
\belowdisplayshortskip 4\p@ \@plus2\p@ \@minus2\p@
\def\@listi{\leftmargin\leftmargini
\topsep 4\p@ \@plus2\p@ \@minus2\p@
\parsep 2\p@ \@plus\p@ \@minus\p@
\itemsep \parsep}%
%
%<*11pt>
\@setfontsize\small\@xpt\@xiipt
\abovedisplayskip 10\p@ \@plus2\p@ \@minus5\p@
\abovedisplayshortskip \z@ \@plus3\p@
\belowdisplayshortskip 6\p@ \@plus3\p@ \@minus3\p@
\def\@listi{\leftmargin\leftmargini
\topsep 6\p@ \@plus2\p@ \@minus2\p@
\parsep 3\p@ \@plus2\p@ \@minus\p@
\itemsep \parsep}%
%
%<*12pt>
\@setfontsize\small\@xipt{13.6}%
\abovedisplayskip 11\p@ \@plus3\p@ \@minus6\p@
\abovedisplayshortskip \z@ \@plus3\p@
\belowdisplayshortskip 6.5\p@ \@plus3.5\p@ \@minus3\p@
\def\@listi{\leftmargin\leftmargini
\topsep 9\p@ \@plus3\p@ \@minus5\p@
\parsep 4.5\p@ \@plus2\p@ \@minus\p@
\itemsep \parsep}%
%
\belowdisplayskip \abovedisplayskip
}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\footnotesize}
% This is similar to |\normalsize|.
% \changes{v1.0h}{1993/12/18}{\cs{footnotesize} is now defined in the
% kernel, so use \cs{renewcommand}. ASAJ.}
% \changes{v1.2e}{1994/04/14}{use \cs{newcommand} again}
% \begin{macrocode}
\DeclareRobustCommand\footnotesize{%
%<*10pt>
\@setfontsize\footnotesize\@viiipt{9.5}%
\abovedisplayskip 6\p@ \@plus2\p@ \@minus4\p@
\abovedisplayshortskip \z@ \@plus\p@
\belowdisplayshortskip 3\p@ \@plus\p@ \@minus2\p@
\def\@listi{\leftmargin\leftmargini
\topsep 3\p@ \@plus\p@ \@minus\p@
\parsep 2\p@ \@plus\p@ \@minus\p@
\itemsep \parsep}%
%
%<*11pt>
\@setfontsize\footnotesize\@ixpt{11}%
\abovedisplayskip 8\p@ \@plus2\p@ \@minus4\p@
\abovedisplayshortskip \z@ \@plus\p@
\belowdisplayshortskip 4\p@ \@plus2\p@ \@minus2\p@
\def\@listi{\leftmargin\leftmargini
\topsep 4\p@ \@plus2\p@ \@minus2\p@
\parsep 2\p@ \@plus\p@ \@minus\p@
\itemsep \parsep}%
%
%<*12pt>
\@setfontsize\footnotesize\@xpt\@xiipt
\abovedisplayskip 10\p@ \@plus2\p@ \@minus5\p@
\abovedisplayshortskip \z@ \@plus3\p@
\belowdisplayshortskip 6\p@ \@plus3\p@ \@minus3\p@
\def\@listi{\leftmargin\leftmargini
\topsep 6\p@ \@plus2\p@ \@minus2\p@
\parsep 3\p@ \@plus2\p@ \@minus\p@
\itemsep \parsep}%
%
\belowdisplayskip \abovedisplayskip
}
%
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\scriptsize}
% \begin{macro}{\tiny}
% \begin{macro}{\large}
% \begin{macro}{\Large}
% \begin{macro}{\LARGE}
% \begin{macro}{\huge}
% \begin{macro}{\Huge}
% These are all much simpler than the previous macros, they just
% select a new fontsize, but leave the parameters for displays and
% lists alone.
% \changes{v1.0h}{1993/12/18}{These are now defined in the kernel,
% so use \cs{renewcommand}. ASAJ.}
% \changes{v1.2e}{1994/04/14}{use \cs{newcommand} again}
% \begin{macrocode}
%<*10pt>
\DeclareRobustCommand\scriptsize{\@setfontsize\scriptsize\@viipt\@viiipt}
\DeclareRobustCommand\tiny{\@setfontsize\tiny\@vpt\@vipt}
\DeclareRobustCommand\large{\@setfontsize\large\@xiipt{14}}
\DeclareRobustCommand\Large{\@setfontsize\Large\@xivpt{18}}
\DeclareRobustCommand\LARGE{\@setfontsize\LARGE\@xviipt{22}}
\DeclareRobustCommand\huge{\@setfontsize\huge\@xxpt{25}}
\DeclareRobustCommand\Huge{\@setfontsize\Huge\@xxvpt{30}}
%
%<*11pt>
\DeclareRobustCommand\scriptsize{\@setfontsize\scriptsize\@viiipt{9.5}}
\DeclareRobustCommand\tiny{\@setfontsize\tiny\@vipt\@viipt}
\DeclareRobustCommand\large{\@setfontsize\large\@xiipt{14}}
\DeclareRobustCommand\Large{\@setfontsize\Large\@xivpt{18}}
\DeclareRobustCommand\LARGE{\@setfontsize\LARGE\@xviipt{22}}
\DeclareRobustCommand\huge{\@setfontsize\huge\@xxpt{25}}
\DeclareRobustCommand\Huge{\@setfontsize\Huge\@xxvpt{30}}
%
%<*12pt>
\DeclareRobustCommand\scriptsize{\@setfontsize\scriptsize\@viiipt{9.5}}
\DeclareRobustCommand\tiny{\@setfontsize\tiny\@vipt\@viipt}
\DeclareRobustCommand\large{\@setfontsize\large\@xivpt{18}}
\DeclareRobustCommand\Large{\@setfontsize\Large\@xviipt{22}}
\DeclareRobustCommand\LARGE{\@setfontsize\LARGE\@xxpt{25}}
\DeclareRobustCommand\huge{\@setfontsize\huge\@xxvpt{30}}
\let\Huge=\huge
%
% \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
%
%
% \subsection{Paragraphing}
%
% \begin{macro}{\lineskip}
% \begin{macro}{\normallineskip}
% These parameters control \TeX's behaviour when two lines tend to
% come too close together.
% \begin{macrocode}
%<*article|report|book>
\setlength\lineskip{1\p@}
\setlength\normallineskip{1\p@}
% \end{macrocode}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\baselinestretch}
% This is used as a multiplier for |\baselineskip|. The default is
% to \emph{not} stretch the baselines. Note that if this command
% doesn't resolve to ``empty'' any \texttt{plus} or \texttt{minus}
% part in the specification of |\baselineskip| is ignored.
% \begin{macrocode}
\renewcommand\baselinestretch{}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\parskip}
% \begin{macro}{\parindent}
% |\parskip| gives extra vertical space between paragraphs and
% |\parindent| is the width of the paragraph indentation. The value
% of |\parindent| depends on whether we are in two-column mode.
% \changes{v1.0m}{1994/01/12}{\cs{parindent} should be different,
% depending on the pointsize}
% \begin{macrocode}
\setlength\parskip{0\p@ \@plus \p@}
%
%<*10pt|11pt|12pt>
\if@twocolumn
\setlength\parindent{1em}
\else
%<10pt> \setlength\parindent{15\p@}
%<11pt> \setlength\parindent{17\p@}
%<12pt> \setlength\parindent{1.5em}
\fi
%
% \end{macrocode}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\smallskipamount}
% \begin{macro}{\medskipamount}
% \begin{macro}{\bigskipamount}
% The values for these three parameters are set in the \LaTeX\
% kernel. They should perhaps vary, according to the size option
% specified. But as they have always had the same value regardless
% of the size option we do not change them to stay compatible with
% both \LaTeX~2.09 and older releases of \LaTeXe.
% \changes{v1.3n}{1995/10/29}{Added setting the values of
% \cs{...skipamount}}
% \begin{macrocode}
%<*10pt|11pt|12pt>
\setlength\smallskipamount{3\p@ \@plus 1\p@ \@minus 1\p@}
\setlength\medskipamount{6\p@ \@plus 2\p@ \@minus 2\p@}
\setlength\bigskipamount{12\p@ \@plus 4\p@ \@minus 4\p@}
%
% \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\@lowpenalty}
% \begin{macro}{\@medpenalty}
% \begin{macro}{\@highpenalty}%
% The commands |\nopagebreak| and |\nolinebreak| put in penalties
% to discourage these breaks at the point they are put in.
% They use |\@lowpenalty|, |\@medpenalty| or |\@highpenalty|,
% dependent on their argument.
% \begin{macrocode}
%<*article|report|book>
\@lowpenalty 51
\@medpenalty 151
\@highpenalty 301
% \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\clubpenalty}
% \begin{macro}{\widowpenalty}
% These penalties are use to discourage club and widow lines.
% Because we use their default values we only show them here,
% commented out.
% \begin{macrocode}
% \clubpenalty 150
% \widowpenalty 150
% \end{macrocode}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\displaywidowpenalty}
% \begin{macro}{\predisplaypenalty}
% \begin{macro}{\postdisplaypenalty}
% Discourage (but not so much) widows in front of a math display
% and forbid breaking directly in front of a display. Allow break
% after a display without a penalty. Again the default values are
% used, therefore we only show them here.
% \begin{macrocode}
% \displaywidowpenalty 50
% \predisplaypenalty 10000
% \postdisplaypenalty 0
% \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\interlinepenalty}
% Allow the breaking of a page in the middle of a paragraph.
% \begin{macrocode}
% \interlinepenalty 0
% \end{macrocode}
% \end{macro}
%
%
% \begin{macro}{\brokenpenalty}
% We allow the breaking of a page after a hyphenated line.
% \changes{v1.1a}{1994/03/12}{Show correct default which is 100}
% \begin{macrocode}
% \brokenpenalty 100
%
% \end{macrocode}
% \end{macro}
%
%
% \subsection{Page Layout}
%
% All margin dimensions are measured from a point one inch from the
% top and lefthand side of the page.
%
% \subsubsection{Vertical spacing}
%
% \begin{macro}{\headheight}
% \begin{macro}{\headsep}
% \begin{macro}{\topskip}
% The |\headheight| is the height of the box that will contain the
% running head. The |\headsep| is the distance between the bottom
% of the running head and the top of the text. The |\topskip| is
% the |\baselineskip| for the first line on a page; \LaTeX's output
% routine will not work properly if it has the value 0pt, so do not
% do that!
% \begin{macrocode}
%<*10pt|11pt|12pt>
\setlength\headheight{12\p@}
%\setlength\headsep {25\p@}
%<10pt&bk>\setlength\headsep {.25in}
%<11pt&bk>\setlength\headsep {.275in}
%<12pt&bk>\setlength\headsep {.275in}
%<10pt>\setlength\topskip {10\p@}
%<11pt>\setlength\topskip {11\p@}
%<12pt>\setlength\topskip {12\p@}
% \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\footskip}
% The distance from the baseline of the box which contains the
% running footer to the baseline of last line of text is controlled
% by the |\footskip|.
% \begin{macrocode}
%\setlength\footskip{30\p@}
%<10pt&bk>\setlength\footskip{.35in}
%<11pt&bk>\setlength\footskip{.38in}
%<12pt&bk>\setlength\footskip{30\p@}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\maxdepth}
% \changes{v1.2k}{1994/05/06}{Added setting of \cs{maxdepth} and
% \cs{@maxdepth}}
% \changes{v1.3j}{1995/08/16}{Take setting of
% \cs{@maxdepth} out again}
% The \TeX\ primitive register |\maxdepth| has a function that is
% similar to that of |\topskip|. The register |\@maxdepth| should
% always contain a copy of |\maxdepth|. This is achieved by setting
% it internally at |\begin{document}|. In both plain \TeX\ and
% \LaTeX~2.09 |\maxdepth| had a fixed value of \texttt{4pt}; in
% native \LaTeX2e\ mode we let the value depend on the typesize. We
% set it so that |\maxdepth| $+$ |\topskip| $=$ typesize $\times
% 1.5$. As it happens, in these classes |\topskip| is equal to the
% typesize, therefore we set |\maxdepth| to half the value of
% |\topskip|.
% \begin{macrocode}
\if@compatibility \setlength\maxdepth{4\p@} \else
\setlength\maxdepth{.5\topskip} \fi
% \end{macrocode}
% \end{macro}
%
% \subsubsection{The dimension of text}
%
% \begin{macro}{\textwidth}
% When we are in compatibility mode we have to make sure that the
% dimensions of the printed area are not different from what the
% user was used to see.
%
% \begin{macrocode}
\if@compatibility
\if@twocolumn
\setlength\textwidth{410\p@}
\else
%<10pt&!bk> \setlength\textwidth{345\p@}
%<11pt&!bk> \setlength\textwidth{360\p@}
%<12pt&!bk> \setlength\textwidth{390\p@}
%<10pt&bk> \setlength\textwidth{4.5in}
%<11pt&bk> \setlength\textwidth{5in}
%<12pt&bk> \setlength\textwidth{5in}
\fi
% \end{macrocode}
% When we are not in compatibility mode we can set some of the
% dimensions differently, taking into account the paper size for
% instance.
% \begin{macrocode}
\else
% \end{macrocode}
% First, we calculate the maximum |\textwidth|, which we will allow
% on the selected paper and store it in |\@tempdima|. Then we store
% the length of a line with approximately 60--70 characters in
% |\@tempdimb|. The values given are more or less suitable when
% Computer Modern fonts are used.
% \changes{v1.1a}{1994/03/12}{Have old values for width in native mode}
% \begin{macrocode}
\setlength\@tempdima{\paperwidth}
\addtolength\@tempdima{-2in}
%<10pt> \setlength\@tempdimb{345\p@}
%<11pt> \setlength\@tempdimb{360\p@}
%<12pt> \setlength\@tempdimb{390\p@}
% \end{macrocode}
%
% Now we can set the |\textwidth|, depending on whether we will be
% setting one or two columns.
%
% In two-column mode each \emph{column} shouldn't be wider than
% |\@tempdimb| (which could happen on \textsc{a3} paper for
% instance).
% \begin{macrocode}
\if@twocolumn
\ifdim\@tempdima>2\@tempdimb\relax
\setlength\textwidth{2\@tempdimb}
\else
\setlength\textwidth{\@tempdima}
\fi
% \end{macrocode}
%
% In one-column mode the text should not be wider than the minimum
% of the paperwidth (minus 2 inches for the margins) and the
% maximum length of a line as defined by the number of characters.
% \begin{macrocode}
\else
\ifdim\@tempdima>\@tempdimb\relax
\setlength\textwidth{\@tempdimb}
\else
\setlength\textwidth{\@tempdima}
\fi
\fi
\fi
% \end{macrocode}
%
% Here we modify the width of the text a little to be a whole
% number of points.
% \begin{macrocode}
\if@compatibility\else
\@settopoint\textwidth
\fi
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\textheight}
% Now that we have computed the width of the text, we have to take
% care of the height. The |\textheight| is the height of text
% (including footnotes and figures, excluding running head and
% foot).
%
% First make sure that the compatibility mode gets the same
% dimensions as we had with \LaTeX2.09. The number of lines was
% calculated as the floor of the old |\textheight| minus
% |\topskip|, divided by |\baselineskip| for |\normalsize|. The
% old value of |\textheight| was 528pt.
%
% \begin{macrocode}
\if@compatibility
%<10pt&!bk> \setlength\textheight{43\baselineskip}
%<10pt&bk> \setlength\textheight{41\baselineskip}
%<11pt> \setlength\textheight{38\baselineskip}
%<12pt> \setlength\textheight{36\baselineskip}
% \end{macrocode}
%
% Again we compute this, depending on the papersize and depending
% on the baselineskip that is used, in order to have a whole number
% of lines on the page.
% \begin{macrocode}
\else
\setlength\@tempdima{\paperheight}
% \end{macrocode}
%
% We leave at least a 1 inch margin on the top and the bottom of
% the page.
% \begin{macrocode}
\addtolength\@tempdima{-2in}
% \end{macrocode}
%
% We also have to leave room for the running headers and footers.
% \begin{macrocode}
\addtolength\@tempdima{-1.5in}
% \end{macrocode}
%
% Then we divide the result by the current |\baselineskip| and
% store this in the count register |\@tempcnta|, which then
% contains the number of lines that fit on this page.
% \begin{macrocode}
\divide\@tempdima\baselineskip
\@tempcnta=\@tempdima
% \end{macrocode}
%
% From this we can calculate the height of the text.
% \begin{macrocode}
\setlength\textheight{\@tempcnta\baselineskip}
\fi
% \end{macrocode}
%
% The first line on the page has a height of |\topskip|.
% \begin{macrocode}
\addtolength\textheight{\topskip}
% \end{macrocode}
% \end{macro}
%
%
%
% \subsubsection{Margins}
%
% Most of the values of these parameters are now calculated, based
% on the papersize in use. In the calculations the |\marginparsep|
% needs to be taken into account so we give it its value first.
%
% \begin{macro}{\marginparsep}
% \begin{macro}{\marginparpush}
% The horizontal space between the main text and marginal notes is
% determined by |\marginparsep|, the minimum vertical separation
% between two marginal notes is controlled by |\marginparpush|.
% \begin{macrocode}
\if@twocolumn
\setlength\marginparsep {10\p@}
\else
%<10pt&!bk> \setlength\marginparsep{11\p@}
%<11pt&!bk> \setlength\marginparsep{10\p@}
%<12pt&!bk> \setlength\marginparsep{10\p@}
% \setlength\marginparsep{7\p@}
\fi
%<10pt|11pt>\setlength\marginparpush{5\p@}
%<12pt>\setlength\marginparpush{7\p@}
% \end{macrocode}
% \end{macro}
% \end{macro}
%
% Now we can give the values for the other margin parameters. For
% native \LaTeXe, these are calculated.
% \begin{macro}{\oddsidemargin}
% \begin{macro}{\evensidemargin}
% \begin{macro}{\marginparwidth}
% First we give the values for the compatibility mode.
%
% Values for two-sided printing:
% \begin{macrocode}
\if@compatibility
%<*bk>
%<10pt> \setlength\oddsidemargin {.5in}
%<11pt> \setlength\oddsidemargin {.25in}
%<12pt> \setlength\oddsidemargin {.25in}
%<10pt> \setlength\evensidemargin {1.5in}
%<11pt> \setlength\evensidemargin {1.25in}
%<12pt> \setlength\evensidemargin {1.25in}
%<10pt> \setlength\marginparwidth {.75in}
%<11pt> \setlength\marginparwidth {1in}
%<12pt> \setlength\marginparwidth {1in}
%
%<*!bk>
\if@twoside
%<10pt> \setlength\oddsidemargin {44\p@}
%<11pt> \setlength\oddsidemargin {36\p@}
%<12pt> \setlength\oddsidemargin {21\p@}
%<10pt> \setlength\evensidemargin {82\p@}
%<11pt> \setlength\evensidemargin {74\p@}
%<12pt> \setlength\evensidemargin {59\p@}
%<10pt> \setlength\marginparwidth {107\p@}
%<11pt> \setlength\marginparwidth {100\p@}
%<12pt> \setlength\marginparwidth {85\p@}
% \end{macrocode}
% Values for one-sided printing:
% \begin{macrocode}
\else
%<10pt> \setlength\oddsidemargin {63\p@}
%<11pt> \setlength\oddsidemargin {54\p@}
%<12pt> \setlength\oddsidemargin {39.5\p@}
%<10pt> \setlength\evensidemargin {63\p@}
%<11pt> \setlength\evensidemargin {54\p@}
%<12pt> \setlength\evensidemargin {39.5\p@}
%<10pt> \setlength\marginparwidth {90\p@}
%<11pt> \setlength\marginparwidth {83\p@}
%<12pt> \setlength\marginparwidth {68\p@}
\fi
%
% \end{macrocode}
% And values for two-column mode:
% \begin{macrocode}
\if@twocolumn
\setlength\oddsidemargin {30\p@}
\setlength\evensidemargin {30\p@}
\setlength\marginparwidth {48\p@}
\fi
% \end{macrocode}
%
% When we are not in compatibility mode we can take the dimensions
% of the selected paper into account.
%
% The values for |\oddsidemargin| and |\marginparwidth| will be set
% depending on the status of the |\if@twoside|.
%
% If |@twoside| is true (which is always the case for book) we make
% the inner margin smaller than the outer one.
% \begin{macrocode}
\else
\if@twoside
\setlength\@tempdima {\paperwidth}
\addtolength\@tempdima {-\textwidth}
\setlength\oddsidemargin {.4\@tempdima}
\addtolength\oddsidemargin {-1in}
% \end{macrocode}
% The width of the margin for text is set to the remainder of the
% width except for a `real margin' of white space of width 0.4in.
% A check should perhaps be built in to ensure that the (text)
% margin width does not get too small!
%
% \changes{v1.1a}{1994/03/12}{New algorithm for \cs{oddsidemargin}}
% \changes{v1.1a}{1994/03/12}{New algorithm for \cs{marginparwidth}}
% \changes{v1.2z}{1995/04/14}{Also take \cs{marginparsep} into account
% here}
% \begin{macrocode}
\setlength\marginparwidth {.6\@tempdima}
\addtolength\marginparwidth {-\marginparsep}
\addtolength\marginparwidth {-0.4in}
% \end{macrocode}
% For one-sided printing we center the text on the page, by
% calculating the difference between |\textwidth| and
% |\paperwidth|. Half of that difference is than used for
% the margin (thus |\oddsidemargin| is |1in| less).
% \begin{macrocode}
\else
\setlength\@tempdima {\paperwidth}
\addtolength\@tempdima {-\textwidth}
\setlength\oddsidemargin {.5\@tempdima}
\addtolength\oddsidemargin {-1in}
\setlength\marginparwidth {.5\@tempdima}
\addtolength\marginparwidth {-\marginparsep}
\addtolength\marginparwidth {-0.4in}
\addtolength\marginparwidth {-.4in}
\fi
% \end{macrocode}
% With the above algorithm the |\marginparwidth| can come out quite
% large which we may not want.
% \begin{macrocode}
\ifdim \marginparwidth >2in
\setlength\marginparwidth{2in}
\fi
% \end{macrocode}
% Having done these calculations we make them pt values.
% \begin{macrocode}
\@settopoint\oddsidemargin
\@settopoint\marginparwidth
% \end{macrocode}
%
% The |\evensidemargin| can now be computed from the values set
% above.
% \changes{v1.0l}{1994/01/11}{Computing of \cs{evensidemargin}
% should only occur in compatibility mode}
% \begin{macrocode}
\setlength\evensidemargin {\paperwidth}
\addtolength\evensidemargin{-2in}
\addtolength\evensidemargin{-\textwidth}
\addtolength\evensidemargin{-\oddsidemargin}
% \end{macrocode}
% Setting |\evensidemargin| to a full point value may produce a
% small error. However it will lie within the error range a
% doublesided printer of today's technology can accurately print.
% \begin{macrocode}
\@settopoint\evensidemargin
\fi
% \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\topmargin}
% The |\topmargin| is the distance between the top of `the
% printable area'---which is 1 inch below the top of the
% paper--and the top of the box which contains the running head.
%
% It can now be computed from the values set above.
% \begin{macrocode}
\if@compatibility
% \setlength\topmargin{27pt}
%<10pt&bk> \setlength\topmargin{.75in}
%<11pt&bk> \setlength\topmargin{.73in}
%<12pt&bk> \setlength\topmargin{.73in}
\else
\setlength\topmargin{\paperheight}
\addtolength\topmargin{-2in}
\addtolength\topmargin{-\headheight}
\addtolength\topmargin{-\headsep}
\addtolength\topmargin{-\textheight}
\addtolength\topmargin{-\footskip} % this might be wrong!
% \end{macrocode}
% By changing the factor in the next line the complete page
% can be shifted vertically.
% \changes{v1.2u}{1994/07/13}{Moved rounding of \cs{topmargin} to
% native mode}
% \begin{macrocode}
\addtolength\topmargin{-.5\topmargin}
\@settopoint\topmargin
\fi
% \end{macrocode}
% \end{macro}
%
%
% \subsubsection{Footnotes}
%
% \begin{macro}{\footnotesep}
% |\footnotesep| is the height of the strut placed at the beginning
% of every footnote. It equals the height of a normal
% |\footnotesize| strut in this
% class, thus no extra space occurs between footnotes.
% \begin{macrocode}
%<10pt>\setlength\footnotesep{6.65\p@}
%<11pt>\setlength\footnotesep{7.7\p@}
%<12pt>\setlength\footnotesep{8.4\p@}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\footins}
% |\skip\footins| is the space between the last line of the main
% text and the top of the first footnote.
% \begin{macrocode}
%<10pt>\setlength{\skip\footins}{9\p@ \@plus 4\p@ \@minus 2\p@}
%<11pt>\setlength{\skip\footins}{10\p@ \@plus 4\p@ \@minus 2\p@}
%<12pt>\setlength{\skip\footins}{10.8\p@ \@plus 4\p@ \@minus 2\p@}
%
% \end{macrocode}
% \end{macro}
%
% \subsubsection{Float placement parameters}
%
% All float parameters are given default values in the \LaTeXe{}
% kernel. For this reason parameters that are not counters
% need to be set with |\renewcommand|.
%
% \paragraph{Limits for the placement of floating objects}
%
% \begin{macro}{\c@topnumber}
% The \Lcount{topnumber} counter holds the maximum number of
% floats that can appear on the top of a text page.
% \begin{macrocode}
%<*article|report|book>
\setcounter{topnumber}{2}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\topfraction}
% This indicates the maximum part of a text page that can be
% occupied by floats at the top.
% \changes{v1.0h}{1993/12/18}{Replaced \cs{newcommand} with
% \cs{renewcommand}. ASAJ.}
% \begin{macrocode}
\renewcommand\topfraction{.7}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\c@bottomnumber}
% The \Lcount{bottomnumber} counter holds the maximum number of
% floats that can appear on the bottom of a text page.
% \begin{macrocode}
\setcounter{bottomnumber}{1}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\bottomfraction}
% This indicates the maximum part of a text page that can be
% occupied by floats at the bottom.
% \changes{v1.0h}{1993/12/18}{Replaced \cs{newcommand} with
% \cs{renewcommand}. ASAJ.}
% \begin{macrocode}
\renewcommand\bottomfraction{.3}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\c@totalnumber}
% This indicates the maximum number of floats that can appear on
% any text page.
% \begin{macrocode}
\setcounter{totalnumber}{3}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\textfraction}
% This indicates the minimum part of a text page that has to be
% occupied by text.
% \changes{v1.0h}{1993/12/18}{Replaced \cs{newcommand} with
% \cs{renewcommand}. ASAJ.}
% \begin{macrocode}
\renewcommand\textfraction{.2}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\floatpagefraction}
% This indicates the minimum part of a page that has to be
% occupied by floating objects before a `float page' is produced.
% \changes{v1.0h}{1993/12/18}{Replaced \cs{newcommand} with
% \cs{renewcommand}. ASAJ.}
% \begin{macrocode}
\renewcommand\floatpagefraction{.5}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\c@dbltopnumber}
% The \Lcount{dbltopnumber} counter holds the maximum number of
% two-column floats that can appear on the top of a two-column text
% page.
% \begin{macrocode}
\setcounter{dbltopnumber}{2}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\dbltopfraction}
% This indicates the maximum part of a two-column text page that
% can be occupied by two-column floats at the top.
% \changes{v1.0h}{1993/12/18}{Replaced \cs{newcommand} with
% \cs{renewcommand}. ASAJ.}
% \begin{macrocode}
\renewcommand\dbltopfraction{.7}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\dblfloatpagefraction}
% This indicates the minimum part of a page that has to be
% occupied by two-column wide floating objects before a `float
% page' is produced.
% \changes{v1.0h}{1993/12/18}{Replaced \cs{newcommand} with
% \cs{renewcommand}. ASAJ.}
% \begin{macrocode}
\renewcommand\dblfloatpagefraction{.5}
%
% \end{macrocode}
% \end{macro}
%
% \paragraph{Floats on a text page}
%
% \begin{macro}{\floatsep}
% \begin{macro}{\textfloatsep}
% \begin{macro}{\intextsep}
% When a floating object is placed on a page with text, these
% parameters control the separation between the float and the other
% objects on the page. These parameters are used for both
% one-column mode and single-column floats in two-column mode.
%
% |\floatsep| is the space between adjacent floats that are moved
% to the top or bottom of the text page.
%
% |\textfloatsep| is the space between the main text and floats
% at the top or bottom of the page.
%
% |\intextsep| is the space between in-text floats and the text.
% \begin{macrocode}
%<*10pt>
\setlength\floatsep {12\p@ \@plus 2\p@ \@minus 2\p@}
\setlength\textfloatsep{20\p@ \@plus 2\p@ \@minus 4\p@}
\setlength\intextsep {12\p@ \@plus 2\p@ \@minus 2\p@}
%
%<*11pt>
\setlength\floatsep {12\p@ \@plus 2\p@ \@minus 2\p@}
\setlength\textfloatsep{20\p@ \@plus 2\p@ \@minus 4\p@}
\setlength\intextsep {12\p@ \@plus 2\p@ \@minus 2\p@}
%
%<*12pt>
\setlength\floatsep {12\p@ \@plus 2\p@ \@minus 4\p@}
\setlength\textfloatsep{20\p@ \@plus 2\p@ \@minus 4\p@}
\setlength\intextsep {14\p@ \@plus 4\p@ \@minus 4\p@}
%
% \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\dblfloatsep}
% \begin{macro}{\dbltextfloatsep}
% When floating objects that span the whole |\textwidth| are placed
% on a text page when we are in two-column mode the separation
% between the float and the text is controlled by |\dblfloatsep|
% and |\dbltextfloatsep|.
%
% |\dblfloatsep| is the space between adjacent floats that are moved
% to the top or bottom of the text page.
%
% |\dbltextfloatsep| is the space between the main text and floats
% at the top or bottom of the page.
%
% \begin{macrocode}
%<*10pt>
\setlength\dblfloatsep {12\p@ \@plus 2\p@ \@minus 2\p@}
\setlength\dbltextfloatsep{20\p@ \@plus 2\p@ \@minus 4\p@}
%
%<*11pt>
\setlength\dblfloatsep {12\p@ \@plus 2\p@ \@minus 2\p@}
\setlength\dbltextfloatsep{20\p@ \@plus 2\p@ \@minus 4\p@}
%
%<*12pt>
\setlength\dblfloatsep {14\p@ \@plus 2\p@ \@minus 4\p@}
\setlength\dbltextfloatsep{20\p@ \@plus 2\p@ \@minus 4\p@}
%
% \end{macrocode}
% \end{macro}
% \end{macro}
%
% \paragraph{Floats on their own page or column}
%
% \begin{macro}{\@fptop}
% \begin{macro}{\@fpsep}
% \begin{macro}{\@fpbot}
% When floating objects are placed on separate pages the layout of
% such pages is controlled by these parameters. At the top of the
% page |\@fptop| amount of stretchable whitespace is inserted, at
% the bottom of the page we get an |\@fpbot| amount of stretchable
% whitespace. Between adjacent floats the |\@fpsep| is inserted.
%
% These parameters are used for the placement of floating objects
% in one-column mode, or in single-column floats in two-column
% mode.
%
% Note that at least one of the two parameters |\@fptop| and
% |\@fpbot| should contain a |plus ...fil| to allow filling the
% remaining empty space.
% \begin{macrocode}
%<*10pt>
\setlength\@fptop{0\p@ \@plus 1fil}
\setlength\@fpsep{8\p@ \@plus 2fil}
\setlength\@fpbot{0\p@ \@plus 1fil}
%
%<*11pt>
\setlength\@fptop{0\p@ \@plus 1fil}
\setlength\@fpsep{8\p@ \@plus 2fil}
\setlength\@fpbot{0\p@ \@plus 1fil}
%
%<*12pt>
\setlength\@fptop{0\p@ \@plus 1fil}
\setlength\@fpsep{10\p@ \@plus 2fil}
\setlength\@fpbot{0\p@ \@plus 1fil}
%
% \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\@dblfptop}
% \begin{macro}{\@dblfpsep}
% \begin{macro}{\@dblfpbot}
% Double-column floats in two-column mode are handled with similar
% parameters.
% \begin{macrocode}
%<*10pt>
\setlength\@dblfptop{0\p@ \@plus 1fil}
\setlength\@dblfpsep{8\p@ \@plus 2fil}
\setlength\@dblfpbot{0\p@ \@plus 1fil}
%
%<*11pt>
\setlength\@dblfptop{0\p@ \@plus 1fil}
\setlength\@dblfpsep{8\p@ \@plus 2fil}
\setlength\@dblfpbot{0\p@ \@plus 1fil}
%
%<*12pt>
\setlength\@dblfptop{0\p@ \@plus 1fil}
\setlength\@dblfpsep{10\p@ \@plus 2fil}
\setlength\@dblfpbot{0\p@ \@plus 1fil}
%
%<*article|report|book>
% \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
%
% \subsection{Page Styles}
%
% The page style \pstyle{foo} is defined by defining the command
% |\ps@foo|. This command should make only local definitions.
% There should be no stray spaces in the definition, since they
% could lead to mysterious extra spaces in the output (well, that's
% something that should be always avoided).
%
% \begin{macro}{\@evenhead}
% \begin{macro}{\@oddhead}
% \begin{macro}{\@evenfoot}
% \begin{macro}{\@oddfoot}
% The |\ps@...| command defines the macros |\@oddhead|,
% |\@oddfoot|, |\@evenhead|, and |\@evenfoot| to define the running
% heads and feet---e.g., |\@oddhead| is the macro to produce the
% contents of the heading box for odd-numbered pages. It is called
% inside an |\hbox| of width |\textwidth|.
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
%
% \subsubsection{Marking conventions}
%
% To make headings determined by the sectioning commands, the page
% style defines the commands |\chaptermark|, |\sectionmark|,
% \ldots,\\
% where |\chaptermark{|\meta{TEXT}|}| is called by
% |\chapter| to set a mark, and so on.
%
% The |\...mark| commands and the |\...head| macros are defined
% with the help of the following macros. (All the |\...mark|
% commands should be initialized to no-ops.)
%
% \LaTeX{} extends \TeX's |\mark| facility by producing two kinds
% of marks, a `left' and a `right' mark, using the following
% commands:
% \begin{flushleft}
% |\markboth{|\meta{LEFT}|}{|\meta{RIGHT}|}|: Adds both marks.
%
% |\markright{|\meta{RIGHT}|}|: Adds a `right' mark.
%
% |\leftmark|: Used in the |\@oddhead|, |\@oddfoot|, |\@evenhead|
% or |\@evenfoot| macros, it gets the current `left'
% mark. |\leftmark| works like \TeX's |\botmark|
% command.
%
% |\rightmark|: Used in the |\@oddhead|, |\@oddfoot|, |\@evenhead|
% or |\@evenfoot| macros, it gets the current
% `right' mark. |\rightmark| works like \TeX's
% |\firstmark| command.
% \end{flushleft}
%
% The marking commands work reasonably well for right marks
% `numbered within' left marks---e.g., the left mark is changed by a
% |\chapter| command and the right mark is changed by a |\section|
% command. However, it does produce somewhat anomalous results if
% two |\markboth|'s occur on the same page.
%
%
% Commands like |\tableofcontents| that should set the marks in some
% page styles use a |\@mkboth| command, which is |\let| by the
% pagestyle command (|\ps@...|) to |\markboth| for setting the
% heading or to |\@gobbletwo| to do nothing.
%
%
% \subsubsection{Defining the page styles}
% \label{sec:classes:pagestyle}
%
% The pagestyles \pstyle{empty} and \pstyle{plain} are defined in
% the \LaTeX{} format.
%
% \begin{macro}{\ps@headings}
% The definition of the page style \pstyle{headings} has to be
% different for two sided printing than it is for one sided
% printing.
%
% \begin{macrocode}
\if@twoside
\def\ps@headings{%
% \end{macrocode}
% The running feet are empty in this page style, the running head
% contains the page number and one of the marks.
% \begin{macrocode}
\let\@oddfoot\@empty\let\@evenfoot\@empty
\def\@evenhead{\thepage\hfil\slshape\leftmark}%
\def\@oddhead{{\slshape\rightmark}\hfil\thepage}%
% \end{macrocode}
%
% When using this page style, the contents of the running head is
% determined by the chapter and section titles. So we |\let|
% |\@mkboth| to |\markboth|.
% \begin{macrocode}
\let\@mkboth\markboth
% \end{macrocode}
%
% For the article document class we define |\sectionmark| to clear
% the right mark and put the number of the section (when it is
% numbered) and its title in the left mark. The rightmark is set by
% |\subsectionmark| to contain the subsection titles.
%
% Note the use of |##1| for the parameter of the |\sectionmark|
% command, which will be defined when |\ps@headings| is executed.
%
% \changes{v1.2z}{1995/04/03}{Removed extra dot after \cs{thesection}
% (PR 1519)}
% \changes{v1.3c}{1995/05/25}{Replace \cs{hskip}
% \texttt{1em}\cs{relax} with \cs{quad}}
% \begin{macrocode}
%<*article>
\def\sectionmark##1{%
\markboth {\MakeUppercase{%
\ifnum \c@secnumdepth >\z@
\thesection\quad
\fi
##1}}{}}%
\def\subsectionmark##1{%
\markright {%
\ifnum \c@secnumdepth >\@ne
\thesubsection\quad
\fi
##1}}}
%
% \end{macrocode}
%
% In the report and book document classes we use the |\chaptermark|
% and |\sectionmark| macros to fill the running heads.
%
% Note the use of |##1| for the parameter of the |\chaptermark|
% command, which will be defined when |\ps@headings| is executed.
%
% \begin{macrocode}
%<*report|book>
\def\chaptermark##1{%
\markboth {\MakeUppercase{%
\ifnum \c@secnumdepth >\m@ne
% \if@mainmatter
\@chapapp\ \thechapter. \ %
% \fi
\fi
##1}}{}}%
\def\sectionmark##1{%
\markright {\MakeUppercase{%
\ifnum \c@secnumdepth >\z@
\thesection. \ %
\fi
##1}}}}
%
% \end{macrocode}
%
% The definition of |\ps@headings| for one sided printing can be
% much simpler, because we treat even and odd pages the same.
% Therefore we don't need to define |\@even...|.
% \begin{macrocode}
\else
\def\ps@headings{%
\let\@oddfoot\@empty
\def\@oddhead{{\slshape\rightmark}\hfil\thepage}%
\let\@mkboth\markboth
% \end{macrocode}
% We use |\markright| now instead of |\markboth| as we did for two
% sided printing.
% \begin{macrocode}
%<*article>
\def\sectionmark##1{%
\markright {\MakeUppercase{%
\ifnum \c@secnumdepth >\m@ne
\thesection\quad
\fi
##1}}}}
%
% \end{macrocode}
%
% \begin{macrocode}
%<*report|book>
\def\chaptermark##1{%
\markright {\MakeUppercase{%
\ifnum \c@secnumdepth >\m@ne
% \if@mainmatter
\@chapapp\ \thechapter. \ %
% \fi
\fi
##1}}}}
%
\fi
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\ps@myheadings}
% The definition of the page style \pstyle{myheadings} is fairly
% simple because the user determines the contents of the running
% head himself by using the |\markboth| and |\markright| commands.
%
% \begin{macrocode}
\def\ps@myheadings{%
\let\@oddfoot\@empty\let\@evenfoot\@empty
\def\@evenhead{\thepage\hfil\slshape\leftmark}%
\def\@oddhead{{\slshape\rightmark}\hfil\thepage}%
% \end{macrocode}
%
% We have to make sure that the marking commands that are used by
% the chapter and section headings are disabled. We do this
% |\let|ting them to a macro that gobbles its argument(s).
% \begin{macrocode}
\let\@mkboth\@gobbletwo
% \let\chaptermark\@gobble
\let\sectionmark\@gobble
% \let\subsectionmark\@gobble
}
% \end{macrocode}
% \end{macro}
%
% \section{Document Markup}
%
% \subsection{The title}
%
% \begin{macro}{\title}
% \begin{macro}{\author}
% \begin{macro}{\date}
% These three macros are provided by the \LaTeX{} format to provide
% information about the title, author(s) and date of the document.
% The information is stored away in internal control sequences.
% It is the task of the |\maketitle| command to use the
% information provided. The definitions of these macros are shown
% here for information.
% \begin{macrocode}
% \DeclareRobustCommand*{\title}[1]{\gdef\@title{#1}}
% \DeclareRobustCommand*{\author}[1]{\gdef\@author{#1}}
% \DeclareRobustCommand*{\date}[1]{\gdef\@date{#1}}
% \end{macrocode}
% The |\date| macro gets today's date by default.
% \begin{macrocode}
% \date{\today}
% \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\maketitle}
% The definition of |\maketitle| depends on whether a separate
% title page is made. This is the default for the report and book
% document classes, but for the article class it is optional.
%
% When we are making a title page, we locally redefine
% |\footnotesize| and |footnoterule| to change the appearance of
% the footnotes that are produced by the |\thanks| command;
% these changes affect all footnotes.
% \changes{v1.3o}{1995/11/02}{(CAR) Make \cs{footnote} always work in
% title, etc}
% \begin{macrocode}
\if@titlepage
\newcommand\maketitle{\begin{titlepage}%
\let\footnotesize\small
\let\footnoterule\relax
\let \footnote \thanks
% \end{macrocode}
% We center the entire title vertically; the centering is set off a
% little by adding a |\vskip|. (In compatibility mode the page number
% is set to 0 by the titlepage environment to keep the behaviour
% of \LaTeX\ 2.09 style files.)
% \changes{v1.0g}{1993/12/09}{Removed the setting of the page number,
% when not in compatibility mode}
% \changes{v1.2c}{1994/03/17}{Removed setting of page number, now done
% in titlepage environment}
% \begin{macrocode}
\null\vfil
\vskip 60\p@
% \end{macrocode}
% Then we set the title, in a |\LARGE| font; leave a little space
% and set the author(s) in a |\large| font. We do this inside a
% tabular environment to get them in a single column.
% Before the date we leave a little whitespace again.
% \begin{macrocode}
\begin{center}%
{\LARGE \@title \par}%
\vskip 3em%
{\large
\lineskip .75em%
\begin{tabular}[t]{c}%
\@author
\end{tabular}\par}%
\vskip 1.5em%
{\large \@date \par}% % Set date in \large size.
\end{center}\par
% \end{macrocode}
% Then we call |\@thanks| to print the information that goes into
% the footnote and finish the page.
% \begin{macrocode}
\@thanks
\vfil\null
\end{titlepage}%
% \end{macrocode}
% We reset the \Lcount{footnote} counter, disable |\thanks| and
% |\maketitle| and save some storage space by emptying the internal
% information macros.
% \changes{v1.3j}{1995/08/16}{use \cs{let} to save space}
% \changes{v1.3n}{1995/10/29}{Empty \cs{@date} as well}
% \begin{macrocode}
\setcounter{footnote}{0}%
\global\let\thanks\relax
\global\let\maketitle\relax
\global\let\@thanks\@empty
\global\let\@author\@empty
\global\let\@date\@empty
\global\let\@title\@empty
% \end{macrocode}
% After the title is set the declaration commands |\title|, etc.\
% can vanish.
% The definition of |\and| makes only sense within the argument of
% |\author| so this can go as well.
% \changes{v1.3k}{1995/08/27}{Disable \cs{title} and similar decls}
% \begin{macrocode}
\global\let\title\relax
\global\let\author\relax
\global\let\date\relax
\global\let\and\relax
}
% \end{macrocode}
% When the title is not on a page of its own, the layout of the
% title is a little different. We use symbols to mark the footnotes
% and we have to deal with two-column documents.
%
% Therefore we first start a new group to keep changes local. Then
% we redefine |\thefootnote| to use |\fnsymbol|; and change
% |\@makefnmark| so that footnotemarks have zero width (to make the
% centering of the author names look better).
% \changes{v1.2s}{1994/06/02}{Reset \cs{@makefntext}}
% \changes{v1.3a}{1995/05/17}{Use \cs{@makefnmark} in definition of
% \cs{@makefntext}}
% \changes{v1.3g}{1995/06/26}{Fix definition of \cs{@makefnmark} and
% \cs{@makefntext} to a) work and b) without using math}
% \begin{macrocode}
\else
\newcommand\maketitle{\par
\begingroup
\renewcommand\thefootnote{\@fnsymbol\c@footnote}%
\def\@makefnmark{\rlap{\@textsuperscript{\normalfont\@thefnmark}}}%
\long\def\@makefntext##1{\parindent 1em\noindent
\hb@xt@1.8em{%
\hss\@textsuperscript{\normalfont\@thefnmark}}##1}%
% \end{macrocode}
% If this is a two-column document we start a new page in two-column
% mode, with the title set to the full width of the text. The
% actual printing of the title information is left to
% |\@maketitle|.
% \changes{v1.2k}{1994/05/06}{Added check on number of columns in use
% locally}
% \begin{macrocode}
\if@twocolumn
\ifnum \col@number=\@ne
\@maketitle
\else
\twocolumn[\@maketitle]%
\fi
\else
% \end{macrocode}
% When this is not a two-column document we just start a new page,
% prevent floating objects from appearing on the top of this page
% and print the title information.
% \begin{macrocode}
\newpage
\global\@topnum\z@ % Prevents figures from going at top of page.
\@maketitle
\fi
% \end{macrocode}
% This page gets a \pstyle{plain} layout. We call |\@thanks| to
% produce the footnotes.
% \begin{macrocode}
\thispagestyle{plain}\@thanks
% \end{macrocode}
% Now we can close the group, reset the \Lcount{footnote} counter,
% disable |\thanks|, |\maketitle| and |\@maketitle| and save some
% storage space by emptying the internal information macros.
% \changes{v1.3j}{1995/08/16}{use \cs{let} to save space}
% \changes{v1.3k}{1995/08/27}{Disable \cs{title} and similar decls}
% \changes{v1.3n}{1995/10/29}{Empty \cs{@date} as well}
% \begin{macrocode}
\endgroup
\setcounter{footnote}{0}%
\global\let\thanks\relax
\global\let\maketitle\relax
\global\let\@maketitle\relax
\global\let\@thanks\@empty
\global\let\@author\@empty
\global\let\@date\@empty
\global\let\@title\@empty
\global\let\title\relax
\global\let\author\relax
\global\let\date\relax
\global\let\and\relax
}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@maketitle}
% This macro takes care of formatting the title information when we
% have no separate title page.
%
% We always start a new page, leave some white space and center the
% information. The title is set in a |\LARGE| font, the author
% names and the date in a |\large| font.
% \changes{v1.3o}{1995/11/02}{(CAR) Make \cs{footnote} always work in
% title, etc}
% \begin{macrocode}
\def\@maketitle{%
\newpage
\null
\vskip 2em%
\begin{center}%
\let \footnote \thanks
{\LARGE \@title \par}%
\vskip 1.5em%
{\large
\lineskip .5em%
\begin{tabular}[t]{c}%
\@author
\end{tabular}\par}%
\vskip 1em%
{\large \@date}%
\end{center}%
\par
\vskip 1.5em}
\fi
% \end{macrocode}
% \end{macro}
%
% \subsection{Chapters and Sections}
%
% \subsubsection{Building blocks} The definitions in this part of the
% class file make use of two internal macros, |\@startsection| and
% |\secdef|. To understand
% what is going on here, we describe their syntax.
%
% The macro |\@startsection| has 6 required arguments, optionally
% followed by a $*$, an optional argument and a required argument:
%
% |\@startsection|\meta{name}\meta{level}\meta{indent}^^A
% \meta{beforeskip}\meta{afterskip}\meta{style}
% optional *\\
% \null\hphantom{\bslash @startsection}^^A
% |[|\meta{altheading}|]|\meta{heading}
%
% It is a generic command to start a section, the arguments have
% the following meaning:
%
% \begin{description}
% \item[\meta{name}] The name of the user level command, e.g.,
% `section'.
% \item[\meta{level}] A number, denoting the depth of the section
% -- e.g., chapter=1, section = 2, etc. A section number
% will be printed if and only if \meta{level} $<=$ the value
% of the \Lcount{secnumdepth} counter.
% \item[\meta{indent}] The indentation of the heading from the left
% margin
% \item[\meta{beforeskip}] The absolute value of this argument
% gives the skip to leave above the heading. If it is
% negative, then the paragraph indent of the text following
% the heading is suppressed.
% \item[\meta{afterskip}] If positive, this gives the skip to leave
% below the heading, else it gives the skip to leave to the
% right of a run-in heading.
% \item[\meta{style}] Commands to set the style of the heading.
% \item[$*$] When this is missing the heading is numbered and the
% corresponding counter is incremented.
% \item[\meta{altheading}] Gives an alternative heading to use in
% the table of contents and in the running heads. This should
% not be present when the $*$ form is used.
% \item[\meta{heading}] The heading of the new section.
% \end{description}
% A sectioning command is normally defined to |\@startsection| and
% its first six arguments.
%
% The macro |\secdef| can be used when a sectioning command is
% defined without using |\@startsection|. It has two arguments:
%
% |\secdef|\meta{unstarcmds}\meta{starcmds}
%
% \begin{description}
% \item[\meta{unstarcmds}] Used for the normal form of the
% sectioning command.
% \item[\meta{starcmds}] Used for the $*$-form of the
% sectioning command.
% \end{description}
%
% You can use |\secdef| as follows:
% \begin{verbatim}
% \def\chapter { ... \secdef \CMDA \CMDB }
% \def\CMDA [#1]#2{ ... } % Command to define
% % \chapter[...]{...}
% \def\CMDB #1{ ... } % Command to define
% % \chapter*{...}
% \end{verbatim}
%
% \subsubsection{Mark commands}
%
% \begin{macro}{\chaptermark}
% \begin{macro}{\sectionmark}
% \begin{macro}{\subsectionmark}
% \begin{macro}{\subsubsectionmark}
% \begin{macro}{\paragraphmark}
% \begin{macro}{\subparagraphmark}
% Default initializations of |\...mark| commands. These commands
% are used in the definition of the page styles (see
% section~\ref{sec:classes:pagestyle}) Most of them are already defined by
% the \LaTeX{} format, so they are only shown here.
%
% \begin{macrocode}
%\newcommand*\chaptermark[1]{}
% \newcommand*\sectionmark[1]{}
% \newcommand*\subsectionmark[1]{}
% \newcommand*\subsubsectionmark[1]{}
% \newcommand*\paragraphmark[1]{}
% \newcommand*\subparagraphmark[1]{}
% \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
%
% \subsubsection{Define Counters}
%
% \begin{macro}{\c@secnumdepth}
% The value of the counter \Lcount{secnumdepth} gives the depth of
% the highest-level sectioning command that is to produce section
% numbers.
% \begin{macrocode}
%\setcounter{secnumdepth}{3}
%\setcounter{secnumdepth}{2}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\c@part}
% \begin{macro}{\c@chapter}
% \begin{macro}{\c@section}
% \begin{macro}{\c@subsection}
% \begin{macro}{\c@subsubsection}
% \begin{macro}{\c@paragraph}
% \begin{macro}{\c@subparagraph}
% These counters are used for the section numbers. The macro\\
% |\newcounter{|\meta{newctr}|}[|\meta{oldctr}|]|\\
% defines\meta{newctr} to be a counter, which is reset to zero when
% counter \meta{oldctr} is stepped. Counter \meta{oldctr} must
% already be defined.
%
% \begin{macrocode}
\newcounter {part}
%\newcounter {section}
%<*report|book>
\newcounter {chapter}
\newcounter {section}[chapter]
%
\newcounter {subsection}[section]
\newcounter {subsubsection}[subsection]
\newcounter {paragraph}[subsubsection]
\newcounter {subparagraph}[paragraph]
% \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\thepart}
% \begin{macro}{\thechapter}
% \begin{macro}{\thesection}
% \begin{macro}{\thesubsection}
% \begin{macro}{\thesubsubsection}
% \begin{macro}{\theparagraph}
% \begin{macro}{\thesubparagraph}
% For any counter \Lcount{CTR}, |\theCTR| is a macro that defines
% the printed version of counter \Lcount{CTR}. It is defined in
% terms of the following macros:
%
% |\arabic{|\Lcount{COUNTER}|}| prints the value of
% \Lcount{COUNTER} as an arabic numeral.
%
% |\roman{|\Lcount{COUNTER}|}| prints the value of
% \Lcount{COUNTER} as a lowercase roman numeral.
%
% |\Roman{|\Lcount{COUNTER}|}| prints the value of
% \Lcount{COUNTER} as an uppercase roman numeral.
%
% |\alph{|\Lcount{COUNTER}|}| prints the value of \Lcount{COUNTER}
% as a lowercase letter: $1 =$~a, $2 =$~ b, etc.
%
% |\Alph{|\Lcount{COUNTER}|}| prints the value of \Lcount{COUNTER}
% as an uppercase letter: $1 =$~A, $2 =$~B, etc.
%
% Actually to save space the internal counter representations
% and the commands operating on those are used.
% \begin{macrocode}
\renewcommand \thepart {\@Roman\c@part}
%\renewcommand \thesection {\@arabic\c@section}
%<*report|book>
\renewcommand \thechapter {\@arabic\c@chapter}
\renewcommand \thesection {\thechapter.\@arabic\c@section}
%
\renewcommand\thesubsection {\thesection.\@arabic\c@subsection}
\renewcommand\thesubsubsection{\thesubsection.\@arabic\c@subsubsection}
\renewcommand\theparagraph {\thesubsubsection.\@arabic\c@paragraph}
\renewcommand\thesubparagraph {\theparagraph.\@arabic\c@subparagraph}
% \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\@chapapp}
% |\@chapapp| is initially defined to be `|\chaptername|'. The
% |\appendix| command redefines it to be `|\appendixname|'.
%
% \begin{macrocode}
%\newcommand\@chapapp{\chaptername}
% \end{macrocode}
% \end{macro}
%
% \subsubsection{Front Matter, Main Matter, and Back Matter}
%
% A book contains these three (logical) sections. The switch
% |\@mainmatter| is true iff we are processing Main Matter. When
% this switch is false, the |\chapter| command does not print
% chapter numbers.
%
% Here we define the commands that start these sections.
% \begin{macro}{\frontmatter}
% This command starts Roman page numbering and turns off chapter
% numbering. Since this restarts the page numbering from 1, it
% should also ensure that a recto page is used.
% \changes{v1.3r}{1996/05/26}{Make this command react to the option
% \texttt{openany}}
% \changes{v1.3y}{1998/05/05}{Two years on: Make this command not
% react to the option \texttt{openany} as this makes the
% verso/recto numbering wrong: see pr/2754 for discussion}
% \begin{macrocode}
%<*book>
\newcommand\frontmatter{%
% \if@openright
\cleardoublepage
% \else
% \clearpage
% \fi
\@mainmatterfalse
\pagenumbering{roman}}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\mainmatter}
% This command clears the page, starts arabic page numbering and
% turns on chapter numbering. Since this restarts the page numbering
% from 1, it should also ensure that a recto page is used.
% \changes{v1.3r}{1996/05/26}{Make this command react to the option
% \texttt{openany}}
% \changes{v1.3y}{1998/05/05}{Two years on: Make this command not
% react to the option \texttt{openany} as this makes the
% verso/recto numbering wrong: see pr/2754 for discussion}
% \begin{macrocode}
\newcommand\mainmatter{%
% \if@openright
\cleardoublepage
% \else
% \clearpage
% \fi
\@mainmattertrue
\pagenumbering{arabic}}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\backmatter}
% This clears the page, turns off chapter numbering and leaves page
% numbering unchanged.
% \begin{macrocode}
\newcommand\backmatter{%
\if@openright
\cleardoublepage
\else
\clearpage
\fi
\@mainmatterfalse}
%
% \end{macrocode}
% \end{macro}
%
% \subsubsection{Parts}
%
% \begin{macro}{\part}
% The command to start a new part of our document.
%
% In the article class the definition of |\part| is rather simple;
% we start a new paragraph, add a little white space, suppress the
% indentation of the first paragraph and make use of |\secdef|.
% As in other sectioning commands (cf.\ |\@startsection| in the
% {\LaTeXe} kernel), we need to check the |@noskipsec| switch and
% force horizontal mode if it is set.
% \changes{v1.4a}{1999/01/07}{Check \texttt{@noskipsec} switch and
% possibly force horizontal mode; see PR/2889.}
% \begin{macrocode}
%<*article>
\newcommand\part{%
\if@noskipsec \leavevmode \fi
\par
\addvspace{4ex}%
\@afterindentfalse
\secdef\@part\@spart}
%
% \end{macrocode}
%
% For the report and book classes we things a bit different.
%
% We start a new (righthand) page and use the \pstyle{plain}
% pagestyle.
% \changes{v1.3r}{1996/05/26}{Make this command react to the option
% \texttt{openany}}
% \begin{macrocode}
%<*report|book>
\newcommand\part{%
\if@openright
\cleardoublepage
\else
\clearpage
\fi
\thispagestyle{plain}%
% \end{macrocode}
% When we are making a two-column document, this will be a one
% column page. We use |@tempswa| to remember to switch back to two
% columns.
% \begin{macrocode}
\if@twocolumn
\onecolumn
\@tempswatrue
\else
\@tempswafalse
\fi
% \end{macrocode}
% We need an empty box to prevent the fil glue from disappearing.
% \changes{v1.3j}{1995/08/16}{Replace \cs{hbox} by \cs{null}}
% \begin{macrocode}
\null\vfil
% \end{macrocode}
% Here we use |\secdef| to indicate which commands to use to make
% the actual heading.
% \begin{macrocode}
\secdef\@part\@spart}
%
% \end{macrocode}
%
% \begin{macro}{\@part}
% This macro does the actual formatting of the title of the part.
% Again the macro is differently defined for the article document
% class than for the document classes report and book.
% When \Lcount{secnumdepth} is larger than $-1$ for the
% document class article, we have a numbered
% part, otherwise it is unnumbered.
% \begin{macrocode}
%<*article>
\def\@part[#1]#2{%
\ifnum \c@secnumdepth >\m@ne
\refstepcounter{part}%
\addcontentsline{toc}{part}{\thepart\hspace{1em}#1}%
\else
\addcontentsline{toc}{part}{#1}%
\fi
% \end{macrocode}
% We print the title flush left in the article class.
% Also we prevent breaking between lines and reset the font.
% \changes{v1.3c}{1995/05/25}{replace \cs{reset@font} with
% \cs{normalfont}}
% \begin{macrocode}
{\parindent \z@ \raggedright
\interlinepenalty \@M
\normalfont
% \end{macrocode}
% When this is a numbered part we have to print the number and the
% title. The |\nobreak| should prevent a page break here.
% \changes{v1.4e}{2001/05/24}{Replaced tilde with \cs{nobreakspace}
% (pr/3310)}
% \begin{macrocode}
\ifnum \c@secnumdepth >\m@ne
\Large\bfseries \partname\nobreakspace\thepart
\par\nobreak
\fi
\huge \bfseries #2%
% \end{macrocode}
% Now we empty the mark registers, leave some white space and let
% |\@afterheading| take care of suppressing the indentation.
% \begin{macrocode}
\markboth{}{}\par}%
\nobreak
\vskip 3ex
\@afterheading}
%
% \end{macrocode}
%
% When \Lcount{secnumdepth} is larger than $-2$ for the
% document class report and book, we have a numbered
% part, otherwise it is unnumbered.
% \begin{macrocode}
%<*report|book>
\def\@part[#1]#2{%
\ifnum \c@secnumdepth >-2\relax
\refstepcounter{part}%
\addcontentsline{toc}{part}{\thepart\hspace{1em}#1}%
\else
\addcontentsline{toc}{part}{#1}%
\fi
% \end{macrocode}
% We empty the mark registers and center the title on the page in the
% report and book document classes.
% Also we prevent breaking between lines and reset the font.
% \changes{v1.3c}{1995/05/25}{replace \cs{reset@font} with
% \cs{normalfont}}
% \changes{v1.3j}{1995/08/16}{add missing percent}
% \begin{macrocode}
\markboth{}{}%
{\centering
\interlinepenalty \@M
\normalfont
% \end{macrocode}
% When this is a numbered part we have to print the number.
% \changes{v1.4e}{2001/05/24}{Replaced tilde with \cs{nobreakspace}
% (pr/3310)}
% \begin{macrocode}
\ifnum \c@secnumdepth >-2\relax
\huge\bfseries \partname\nobreakspace\thepart
\par
% \end{macrocode}
% We leave some space before we print the title and leave the
% finishing up to |\@endpart|.
% \begin{macrocode}
\vskip 20\p@
\fi
\Huge \bfseries #2\par}%
\@endpart}
%
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@spart}
% This macro does the actual formatting of the title of the part
% when the star form of the user command was used. In this case we
% \emph{never} print a number. Otherwise the formatting is the
% same.
%
% The differences between the definition of this macro in the
% article document class and in the report and book document
% classes are similar as they were for |\@part|.
% \changes{v1.3c}{1995/05/25}{replace \cs{reset@font} with
% \cs{normalfont}}
% \begin{macrocode}
%<*article>
\def\@spart#1{%
{\parindent \z@ \raggedright
\interlinepenalty \@M
\normalfont
\huge \bfseries #1\par}%
\nobreak
\vskip 3ex
\@afterheading}
%
%<*report|book>
\def\@spart#1{%
{\centering
\interlinepenalty \@M
\normalfont
\Huge \bfseries #1\par}%
\@endpart}
%
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@endpart}
% \changes{v1.3j}{1995/08/16}{move docstrip guard to avoid defining
% \cs{@endpart} in article}
% This macro finishes the part page, for both |\@part| and
% |\@spart|.
%
% First we fill the current page.
% \begin{macrocode}
%<*report|book>
\def\@endpart{\vfil\newpage
% \end{macrocode}
% Then, when we are in twosided mode and chapters are supposed to
% be on right hand sides, we produce a completely blank page.
% \changes{v1.4b}{2000/05/19}{Only add empty page after part if
% twoside and openright (pr/3155)}
% \begin{macrocode}
\if@twoside
\if@openright
\null
\thispagestyle{empty}%
\newpage
\fi
\fi
% \end{macrocode}
% When this was a two-column document we have to switch back to
% two-column mode.
% \begin{macrocode}
\if@tempswa
\twocolumn
\fi}
%
% \end{macrocode}
% \end{macro}
% \end{macro}
%
% \subsubsection{Chapters}
%
% \begin{macro}{\chapter}
% A chapter should always start on a new page therefore we start by
% calling |\clearpage| and setting the pagestyle for this page to
% \pstyle{plain}.
% \begin{macrocode}
%<*report|book>
\newcommand\chapter{\if@openright\cleardoublepage\else\clearpage\fi
\thispagestyle{plain}%
% \end{macrocode}
% Then we prevent floats from appearing at the top of this page
% because it looks weird to see a floating object above a chapter
% title.
% \begin{macrocode}
\global\@topnum\z@
% \end{macrocode}
% Then we suppress the indentation of the first paragraph by
% setting the switch |\@afterindent| to |false|. We use |\secdef|
% to specify the macros to use for actually setting the chapter
% title.
% \begin{macrocode}
\@afterindentfalse
\secdef\@chapter\@schapter}
% \end{macrocode}
%
% \begin{macro}{\@chapter}
% This macro is called when we have a numbered chapter. When
% \Lcount{secnumdepth} is larger than $-1$ and, in the book
% class, |\@mainmatter| is true, we display the chapter
% number. We also inform the user that a new chapter is about to be
% typeset by writing a message to the terminal.
% \begin{macrocode}
\def\@chapter[#1]#2{\ifnum \c@secnumdepth >\m@ne
% \if@mainmatter
\refstepcounter{chapter}%
\typeout{\@chapapp\space\thechapter.}%
\addcontentsline{toc}{chapter}%
{\protect\numberline{\thechapter}#1}%
%<*book>
\else
\addcontentsline{toc}{chapter}{#1}%
\fi
%
\else
\addcontentsline{toc}{chapter}{#1}%
\fi
% \end{macrocode}
% After having written an entry to the table of contents we store
% the (alternative) title of this chapter with |\chaptermark| and
% add some white space to the lists of figures and tables.
% \begin{macrocode}
\chaptermark{#1}%
\addtocontents{lof}{\protect\addvspace{10\p@}}%
\addtocontents{lot}{\protect\addvspace{10\p@}}%
% \end{macrocode}
% Then we call upon |\@makechapterhead| to format the actual
% chapter title. We have to do this in a special way when we are in
% two-column mode in order to have the chapter title use the entire
% |\textwidth|. In one-column mode we call |\@afterheading| which
% takes care of suppressing the indentation.
% \begin{macrocode}
\if@twocolumn
\@topnewpage[\@makechapterhead{#2}]%
\else
\@makechapterhead{#2}%
\@afterheading
\fi}
% \end{macrocode}
%
% \begin{macro}{\@makechapterhead}
% The macro above uses |\@makechapterhead|\meta{text} to format the
% heading of the chapter.
%
% We begin by leaving some white space. Then we open a group in
% which we have a paragraph indent of 0pt, and in which we have the
% text set ragged right. We also reset the font.
% \changes{v1.3c}{1995/05/25}{replace \cs{reset@font} with
% \cs{normalfont}}
% \begin{macrocode}
\def\@makechapterhead#1{%
\vspace*{50\p@}%
{\parindent \z@ \raggedright \normalfont
% \end{macrocode}
% Then we check whether the number of the chapter has to be printed.
% If so we leave some whitespace between the chapternumber and its
% title.
% \changes{v1.2v}{1994/11/30}{Added a \cs{nobreak} to prevent a
% pagebreak between the chapternumber and the chaptertitle}
% \changes{v1.3j}{1995/08/16}{replace braces by \cs{space}}
% \begin{macrocode}
\ifnum \c@secnumdepth >\m@ne
% \if@mainmatter
\huge\bfseries \@chapapp\space \thechapter
\par\nobreak
\vskip 20\p@
% \fi
\fi
% \end{macrocode}
% Now we set the title in a large bold font. We prevent a pagebreak
% from occurring in the middle of or after the title. Finally we
% leave some whitespace before the text begins.
% \changes{v1.2v}{1994/11/30}{Added \cs{interlinepenalty}\cs{@M} to
% prevent a pagebreak in the middle of a title}
% \begin{macrocode}
\interlinepenalty\@M
\Huge \bfseries #1\par\nobreak
\vskip 40\p@
}}
% \end{macrocode}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\@schapter}
% This macro is called when we have an unnumbered chapter. It is
% much simpler than |\@chapter| because it only needs to typeset
% the chapter title.
% \begin{macrocode}
\def\@schapter#1{\if@twocolumn
\@topnewpage[\@makeschapterhead{#1}]%
\else
\@makeschapterhead{#1}%
\@afterheading
\fi}
% \end{macrocode}
%
% \begin{macro}{\@makeschapterhead}
% The macro above uses |\@makeschapterhead|\meta{text}to format
% the heading of the chapter. It is similar to |\@makechapterhead|
% except that it never has to print a chapter number.
%
% \changes{v1.2v}{1994/11/30}{Added \cs{interlinepenalty}\cs{@M} to
% prevent a pagebreak in the middle of a title}
% \changes{v1.3c}{1995/05/25}{replace \cs{reset@font} with
% \cs{normalfont}}
% \begin{macrocode}
\def\@makeschapterhead#1{%
\vspace*{50\p@}%
{\parindent \z@ \raggedright
\normalfont
\interlinepenalty\@M
\Huge \bfseries #1\par\nobreak
\vskip 40\p@
}}
%
% \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
%
%
% \subsubsection{Lower level headings}
%
% These commands all make use of |\@startsection|.
% \begin{macro}{\section}
% This gives a normal heading with white space above and below the
% heading, the title set in |\Large\bfseries|, and no indentation
% on the first paragraph.
% \changes{v1.3c}{1995/05/25}{replace \cs{reset@font} with
% \cs{normalfont}}
% \begin{macrocode}
\newcommand\section{\@startsection {section}{1}{\z@}%
{-3.5ex \@plus -1ex \@minus -.2ex}%
{2.3ex \@plus.2ex}%
{\normalfont\Large\bfseries}}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\subsection}
% This gives a normal heading with white space above and below the
% heading, the title set in |\large\bfseries|, and no indentation
% on the first paragraph.
% \begin{macrocode}
\newcommand\subsection{\@startsection{subsection}{2}{\z@}%
{-3.25ex\@plus -1ex \@minus -.2ex}%
{1.5ex \@plus .2ex}%
{\normalfont\large\bfseries}}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\subsubsection}
% This gives a normal heading with white space above and below the
% heading, the title set in |\normalsize\bfseries|, and no
% indentation on the first paragraph.
% \begin{macrocode}
\newcommand\subsubsection{\@startsection{subsubsection}{3}{\z@}%
{-3.25ex\@plus -1ex \@minus -.2ex}%
{1.5ex \@plus .2ex}%
{\normalfont\normalsize\bfseries}}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\paragraph}
% This gives a run-in heading with white space above and to the
% right of the heading, the title set in |\normalsize\bfseries|.
% \begin{macrocode}
\newcommand\paragraph{\@startsection{paragraph}{4}{\z@}%
{3.25ex \@plus1ex \@minus.2ex}%
{-1em}%
{\normalfont\normalsize\bfseries}}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\subparagraph}
% This gives an indented run-in heading with white space above and
% to the right of the heading, the title set in
% |\normalsize\bfseries|.
% \begin{macrocode}
\newcommand\subparagraph{\@startsection{subparagraph}{5}{\parindent}%
{3.25ex \@plus1ex \@minus .2ex}%
{-1em}%
{\normalfont\normalsize\bfseries}}
% \end{macrocode}
% \end{macro}
%
% \subsection{Lists}
%
% \subsubsection{General List Parameters}
%
% The following commands are used to set the default values for the list
% environment's parameters. See the \LaTeX{} manual for an explanation
% of the meanings of the parameters. Defaults for the list
% environment are set as follows. First, |\rightmargin|,
% |\listparindent| and |\itemindent| are set to 0pt. Then, for a Kth
% level list, the command |\@listK| is called, where `K' denotes `i',
% '`i', ... , `vi'. (I.e., |\@listiii| is called for a third-level
% list.) By convention, |\@listK| should set |\leftmargin| to
% |\leftmarginK|.
%
% \begin{macro}{\leftmargin}
% \begin{macro}{\leftmargini}
% \begin{macro}{\leftmarginii}
% \begin{macro}{\leftmarginiii}
% \begin{macro}{\leftmarginiv}
% \begin{macro}{\leftmarginv}
% \begin{macro}{\leftmarginvi}
% \changes{v1.0m}{1994/01/12}{Use em instead of pt to remain
% compatible with old styles}
% \changes{v1.3q}{1995/12/20}{Temporary(?) fix: revert to setting
% \cs{leftmargin} at outer level}
%
% When we are in two-column mode some of the margins are set somewhat
% smaller.
% \begin{macrocode}
\if@twocolumn
\setlength\leftmargini {2em}
\else
\setlength\leftmargini {2.5em}
\fi
% \end{macrocode}
% Until the whole of the parameter setting in these files is
% rationalised, we need to set the value of |\leftmargin| at this
% outer level.
% \begin{macrocode}
\leftmargin \leftmargini
% \end{macrocode}
% The following three are calculated so that they are larger than
% the sum of |\labelsep| and the width of the default labels (which
% are `(m)', `vii.' and `M.').
% \begin{macrocode}
\setlength\leftmarginii {2.2em}
\setlength\leftmarginiii {1.87em}
\setlength\leftmarginiv {1.7em}
\if@twocolumn
\setlength\leftmarginv {.5em}
\setlength\leftmarginvi {.5em}
\else
\setlength\leftmarginv {1em}
\setlength\leftmarginvi {1em}
\fi
% \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\labelsep}
% \begin{macro}{\labelwidth}
% \changes{v1.0m}{1994/01/12}{Use em instead of pt to remain
% compatible with old styles}
% |\labelsep| is the distance between the label and the text of an
% item; |\labelwidth| is the width of the label.
% \begin{macrocode}
\setlength \labelsep {.5em}
\setlength \labelwidth{\leftmargini}
\addtolength\labelwidth{-\labelsep}
% \end{macrocode}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\partopsep}
% When the user leaves a blank line before the environment an extra
% vertical space of |\partopsep| is inserted, in addition to
% |\parskip| and |\topsep|.
% \changes{v1.0m}{1994/01/12}{\cs{partopsep} should be different,
% depending on the pointsize}
% \begin{macrocode}
%
%<10pt>\setlength\partopsep{2\p@ \@plus 1\p@ \@minus 1\p@}
%<11pt>\setlength\partopsep{3\p@ \@plus 1\p@ \@minus 1\p@}
%<12pt>\setlength\partopsep{3\p@ \@plus 2\p@ \@minus 2\p@}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@beginparpenalty}
% \begin{macro}{\@endparpenalty}
% These penalties are inserted before and after a list or paragraph
% environment. They are set to a bonus value to encourage page
% breaking at these points.
% \begin{macro}{\@itempenalty}
% This penalty is inserted between list items.
% \begin{macrocode}
%<*article|report|book>
\@beginparpenalty -\@lowpenalty
\@endparpenalty -\@lowpenalty
\@itempenalty -\@lowpenalty
%
% \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\@listi}
% \begin{macro}{\@listI}
% |\@listi| defines the values of
% |\leftmargin|, |\parsep|, |\topsep|, |\itemsep|, etc.\ for the
% lists that appear on top-level. Its definition is modified by the
% font-size commands (eg within |\small| the list parameters get
% ``smaller'' values).
%
% For this reason \@listI is defined to hold a saved copy of \@listi
% so that |\normalsize| can switch all parameters back.
%
% \begin{macrocode}
%<*10pt|11pt|12pt>
\def\@listi{\leftmargin\leftmargini
%<*10pt>
\parsep 4\p@ \@plus2\p@ \@minus\p@
\topsep 8\p@ \@plus2\p@ \@minus4\p@
\itemsep4\p@ \@plus2\p@ \@minus\p@}
%
%<*11pt>
\parsep 4.5\p@ \@plus2\p@ \@minus\p@
\topsep 9\p@ \@plus3\p@ \@minus5\p@
\itemsep4.5\p@ \@plus2\p@ \@minus\p@}
%
%<*12pt>
\parsep 5\p@ \@plus2.5\p@ \@minus\p@
\topsep 10\p@ \@plus4\p@ \@minus6\p@
\itemsep5\p@ \@plus2.5\p@ \@minus\p@}
%
\let\@listI\@listi
% \end{macrocode}
% We initialise the parameters although strictly speaking that
% is not necessary.
% \begin{macrocode}
\@listi
% \end{macrocode}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\@listii}
% \begin{macro}{\@listiii}
% \begin{macro}{\@listiv}
% \begin{macro}{\@listv}
% \begin{macro}{\@listvi}
% Here are the same macros for the higher level lists. Note that
% they don't have saved versions and are not modified by the font
% size commands. In other words this class assumes that nested
% lists only appear in |\normalsize|, i.e.\ the main document size.
% \begin{macrocode}
\def\@listii {\leftmargin\leftmarginii
\labelwidth\leftmarginii
\advance\labelwidth-\labelsep
%<*10pt>
\topsep 4\p@ \@plus2\p@ \@minus\p@
\parsep 2\p@ \@plus\p@ \@minus\p@
%
%<*11pt>
\topsep 4.5\p@ \@plus2\p@ \@minus\p@
\parsep 2\p@ \@plus\p@ \@minus\p@
%
%<*12pt>
\topsep 5\p@ \@plus2.5\p@ \@minus\p@
\parsep 2.5\p@ \@plus\p@ \@minus\p@
%
\itemsep \parsep}
\def\@listiii{\leftmargin\leftmarginiii
\labelwidth\leftmarginiii
\advance\labelwidth-\labelsep
%<10pt> \topsep 2\p@ \@plus\p@\@minus\p@
%<11pt> \topsep 2\p@ \@plus\p@\@minus\p@
%<12pt> \topsep 2.5\p@\@plus\p@\@minus\p@
\parsep \z@
\partopsep \p@ \@plus\z@ \@minus\p@
\itemsep \topsep}
\def\@listiv {\leftmargin\leftmarginiv
\labelwidth\leftmarginiv
\advance\labelwidth-\labelsep}
\def\@listv {\leftmargin\leftmarginv
\labelwidth\leftmarginv
\advance\labelwidth-\labelsep}
\def\@listvi {\leftmargin\leftmarginvi
\labelwidth\leftmarginvi
\advance\labelwidth-\labelsep}
%
% \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
%
% \subsubsection{Enumerate}
%
% The enumerate environment uses four counters: \Lcount{enumi},
% \Lcount{enumii}, \Lcount{enumiii} and \Lcount{enumiv}, where
% \Lcount{enumN} controls the numbering of the Nth level
% enumeration.
%
% \begin{macro}{\theenumi}
% \begin{macro}{\theenumii}
% \begin{macro}{\theenumiii}
% \begin{macro}{\theenumiv}
% The counters are already defined in the \LaTeX{} format, but their
% representation is changed here.
%
% \begin{macrocode}
%<*article|report|book>
\renewcommand\theenumi{\@arabic\c@enumi}
\renewcommand\theenumii{\@alph\c@enumii}
\renewcommand\theenumiii{\@roman\c@enumiii}
\renewcommand\theenumiv{\@Alph\c@enumiv}
% \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\labelenumi}
% \begin{macro}{\labelenumii}
% \begin{macro}{\labelenumiii}
% \begin{macro}{\labelenumiv}
% The label for each item is generated by the commands\\
% |\labelenumi| \ldots\ |\labelenumiv|.
% \begin{macrocode}
\newcommand\labelenumi{\theenumi.}
\newcommand\labelenumii{(\theenumii)}
\newcommand\labelenumiii{\theenumiii.}
\newcommand\labelenumiv{\theenumiv.}
% \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\p@enumii}
% \begin{macro}{\p@enumiii}
% \begin{macro}{\p@enumiv}
% The expansion of |\p@enumN||\theenumN| defines the output of a
% |\ref| command when referencing an item of the Nth level of an
% enumerated list.
% \begin{macrocode}
\renewcommand\p@enumii{\theenumi}
\renewcommand\p@enumiii{\theenumi(\theenumii)}
\renewcommand\p@enumiv{\p@enumiii\theenumiii}
% \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
%
% \subsubsection{Itemize}
%
% \begin{macro}{\labelitemi}
% \begin{macro}{\labelitemii}
% \changes{v1.2k}{1994/05/06}{Inserted \cs{normalfont}}
% \changes{v1.3s}{1996/08/24}{Replaced -{}- with \cs{textendash}}
% \changes{v1.3u}{1996/10/31}{Changed to \cs{textbullet},
% \cs{textasteriskcentered} and \cs{textperiodcentered}}
% \begin{macro}{\labelitemiii}
% \begin{macro}{\labelitemiv}
% Itemization is controlled by four commands: |\labelitemi|,
% |\labelitemii|, |\labelitemiii|, and |\labelitemiv|, which define
% the labels of the various itemization levels: the symbols used are
% bullet, bold en-dash, centered asterisk and centred dot.
%
% \changes{v1.4n}{2021/06/11}{Drop incorrect space in \cs{labelitemiv} (gh/496)}
% \begin{macrocode}
\newcommand\labelitemi {\labelitemfont \textbullet}
\newcommand\labelitemii {\labelitemfont \bfseries \textendash}
\newcommand\labelitemiii{\labelitemfont \textasteriskcentered}
\newcommand\labelitemiv {\labelitemfont \textperiodcentered}
% \end{macrocode}
%
% \begin{macro}{\labelitemfont}
% The default definition for \cs{labelitemfont} is to reset the
% font to \cs{normalfont} so that always the same symbol is
% produced regardless of surrounding conditions.
%
% \changes{v1.4l}{2019/12/20}{Normalize label fonts}
% Possible alternatives would be, for example,
%\begin{verbatim}
% \renewcommand\labelitemfont
% {\normalfont\fontfamily{lmss}\selectfont}
% \renewcommand\labelitemfont
% {\rmfamily\normalshape}
%\end{verbatim}
% the first would use symbols from Latin Modern Sans, the second
% would only allow changes in the font series so that an
% \texttt{itemize} in a bold context would produce bolder symbols.
% \begin{macrocode}
\newcommand\labelitemfont{\normalfont}
% \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
%
% \subsubsection{Description}
%
% \begin{environment}{description}
% The description environment is defined here -- while the itemize
% and enumerate environments are defined in the \LaTeX{} format.
%
% \begin{macrocode}
\newenvironment{description}
{\list{}{\labelwidth\z@ \itemindent-\leftmargin
\let\makelabel\descriptionlabel}}
{\endlist}
% \end{macrocode}
% \end{environment}
%
% \begin{macro}{\descriptionlabel}
% To change the formatting of the label, you must redefine
% |\descriptionlabel|.
%
% \changes{v1.2k}{1994/05/06}{Inserted \cs{normalfont}}
% \changes{v1.2y}{1995/01/31}{made command short}
% \begin{macrocode}
\newcommand*\descriptionlabel[1]{\hspace\labelsep
\normalfont\bfseries #1}
% \end{macrocode}
% \end{macro}
%
% \subsection{Defining new environments}
%
% \subsubsection{Abstract}
%
% \begin{environment}{abstract}
% When we are producing a separate titlepage we also put the
% abstract on a page of its own. It will be centred vertically on
% the page.
%
% Note that this environment is not defined for books.
% \changes{v1.3e}{1995/06/19}{Added setting of \cs{@endparpenalty}
% to avoid page break after abstract heading.}
% \begin{macrocode}
% \changes{v1.3m}{1995/10/23}{Added setting of \cs{beginparpenalty} to
% discourage page break before abstract heading.}
%<*article|report>
\if@titlepage
\newenvironment{abstract}{%
\titlepage
\null\vfil
\@beginparpenalty\@lowpenalty
\begin{center}%
\bfseries \abstractname
\@endparpenalty\@M
\end{center}}%
{\par\vfil\null\endtitlepage}
% \end{macrocode}
% When we are not making a separate titlepage --the default for the
% article document class-- we have to check if we are in two-column
% mode. In that case the abstract is as a |\section*|, otherwise
% the quotation environment is used to typeset the abstract.
% \begin{macrocode}
\else
\newenvironment{abstract}{%
\if@twocolumn
\section*{\abstractname}%
\else
\small
\begin{center}%
{\bfseries \abstractname\vspace{-.5em}\vspace{\z@}}%
\end{center}%
\quotation
\fi}
{\if@twocolumn\else\endquotation\fi}
\fi
%
% \end{macrocode}
% \end{environment}
%
% \subsubsection{Verse}
%
% \begin{environment}{verse}
% The verse environment is defined by making clever use of the
% list environment's parameters. The user types |\\| to end a line.
% This is implemented by |\let|'ing |\\| equal |\@centercr|.
%
% \changes{v1.3j}{1995/08/16}{stop \cs{item} scanning for [ with
% \cs{relax}}
% \begin{macrocode}
\newenvironment{verse}
{\let\\\@centercr
\list{}{\itemsep \z@
\itemindent -1.5em%
\listparindent\itemindent
\rightmargin \leftmargin
\advance\leftmargin 1.5em}%
\item\relax}
{\endlist}
% \end{macrocode}
% \end{environment}
%
% \subsubsection{Quotation}
%
% \begin{environment}{quotation}
% The quotation environment is also defined by making clever use of
% the list environment's parameters. The lines in the environment
% are set smaller than |\textwidth|. The first line of a paragraph
% inside this environment is indented.
%
% \changes{v1.3j}{1995/08/16}{stop \cs{item} scanning for [ with
% \cs{relax}}
% \begin{macrocode}
\newenvironment{quotation}
{\list{}{\listparindent 1.5em%
\itemindent \listparindent
\rightmargin \leftmargin
\parsep \z@ \@plus\p@}%
\item\relax}
{\endlist}
% \end{macrocode}
% \end{environment}
%
% \subsubsection{Quote}
%
% \begin{environment}{quote}
% The quote environment is like the quotation environment except
% that paragraphs are not indented.
%
% \changes{v1.3j}{1995/08/16}{stop \cs{item} scanning for [ with
% \cs{relax}}
% \begin{macrocode}
\newenvironment{quote}
{\list{}{\rightmargin\leftmargin}%
\item\relax}
{\endlist}
% \end{macrocode}
% \end{environment}
%
% \subsubsection{Theorem}
%
% This document class does not define it's own theorem environments,
% the defaults, supplied by the \LaTeX{} format are available.
%
% \subsubsection{Titlepage}
%
% \begin{environment}{titlepage}
% In the normal environments, the titlepage environment does nothing
% but start and end a page, and inhibit page numbers. When \LaTeX\ is
% in two-column mode, the environmont temporarily switches to
% one-column mode.
% In the report class, it also resets the page number to one, and
% then, in two-column mode, sets it back to one at the end.
% For the book class the environment makes sure that the title page
% is on a recto page by issueing a \cs{cleardouplepage}-command.
% In compatibility mode, it sets the page number to zero. This is
% incorrect since it results in using the page parameters for a
% right-hand page but it is the way it was.
%
% \changes{v1.0g}{1993/12/09}{Moved the setting of
% \cs{@restonecolfalse}}
% \changes{v1.2c}{1994/03/17}{page :!= 0 only in compatibility mode
% (LL)}
% \changes{v1.2d}{1994/04/11}{Moved \cs{cleardoublepage} inside
% definition of titlepage environment}
% \changes{v1.3i}{1995/08/08}{New implementation with support for
% twoside and openright option}
%
% First we do give the definition for compatibility mode.
% \begin{macrocode}
\if@compatibility
\newenvironment{titlepage}
{%
% \cleardoublepage
\if@twocolumn
\@restonecoltrue\onecolumn
\else
\@restonecolfalse\newpage
\fi
\thispagestyle{empty}%
\setcounter{page}\z@
}%
{\if@restonecol\twocolumn \else \newpage \fi
}
% \end{macrocode}
%
% And here is the one for native \LaTeXe{}.
% \begin{macrocode}
\else
\newenvironment{titlepage}
{%
% \cleardoublepage
\if@twocolumn
\@restonecoltrue\onecolumn
\else
\@restonecolfalse\newpage
\fi
\thispagestyle{empty}%
\setcounter{page}\@ne
}%
{\if@restonecol\twocolumn \else \newpage \fi
% \end{macrocode}
% If we are not in two-side mode the first page after the title page
% should also get page number 1.
% \begin{macrocode}
\if@twoside\else
\setcounter{page}\@ne
\fi
}
\fi
% \end{macrocode}
% \end{environment}
%
% \subsubsection{Appendix}
%
% \begin{macro}{\appendix}
%
% The |\appendix| command is not really an environment, it is a
% macro that makes some changes in the way things are done.
%
% In the article document class the |\appendix| command must do the
% following:
% \begin{itemize}
% \item reset the section and subsection counters to zero,
% \item redefine |\thesection| to produce alphabetic appendix
% numbers. This redefinition is done globally to ensure that it
% survives even if |\appendix| is issued within an environment such
% as \texttt{multicols}.
% \end{itemize}
%
% \changes{1.3z}{1998/09/19}{Redefine \cs{thesection} globally (pr/2862)}
% \begin{macrocode}
%<*article>
\newcommand\appendix{\par
\setcounter{section}{0}%
\setcounter{subsection}{0}%
\gdef\thesection{\@Alph\c@section}}
%
% \end{macrocode}
%
% In the report and book document classes the |\appendix| command
% must do the following:
% \begin{itemize}
% \item reset the chapter and section counters to zero,
% \item set |\@chapapp| to |\appendixname| (for messages),
% \item redefine the chapter counter to produce appendix numbers,
% \item possibly redefine the |\chapter| command if appendix titles
% and headings are to look different from chapter titles and
% headings. This redefinition is done globally to ensure that it
% survives even if |\appendix| is issued within an environment such
% as \texttt{multicols}.
% \end{itemize}
%
% \changes{1.3z}{1998/09/19}{Redefine \cs{thechapter} and
% \cs{@chapapp} globally (pr/2862)}
% \begin{macrocode}
%<*report|book>
\newcommand\appendix{\par
\setcounter{chapter}{0}%
\setcounter{section}{0}%
\gdef\@chapapp{\appendixname}%
\gdef\thechapter{\@Alph\c@chapter}}
%
% \end{macrocode}
% \end{macro}
%
% \subsection{Setting parameters for existing environments}
%
% \subsubsection{Array and tabular}
%
% \begin{macro}{\arraycolsep}
% The columns in an array environment are separated by
% 2|\arraycolsep|.
% \begin{macrocode}
\setlength\arraycolsep{5\p@}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\tabcolsep}
% The columns in an tabular environment are separated by
% 2|\tabcolsep|.
% \begin{macrocode}
\setlength\tabcolsep{6\p@}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\arrayrulewidth}
% The width of rules in the array and tabular environments is given
% by\\ |\arrayrulewidth|.
% \begin{macrocode}
\setlength\arrayrulewidth{.4\p@}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\doublerulesep}
% The space between adjacent rules in the array and tabular
% environments is given by |\doublerulesep|.
% \begin{macrocode}
\setlength\doublerulesep{2\p@}
% \end{macrocode}
% \end{macro}
%
% \subsubsection{Tabbing}
%
% \begin{macro}{\tabbingsep}
% This controls the space that the |\'| command puts in. (See
% \LaTeX{} manual for an explanation.)
% \begin{macrocode}
\setlength\tabbingsep{\labelsep}
% \end{macrocode}
% \end{macro}
%
% \subsubsection{Minipage}
%
% \begin{macro}{\@minipagerestore}
% The macro |\@minipagerestore| is called upon entry to a minipage
% environment to set up things that are to be handled differently
% inside a minipage environment. In the current classes, it does
% nothing.
% \end{macro}
%
% \begin{macro}{\@mpfootins}
% Minipages have their own footnotes; |\skip||\@mpfootins| plays
% same r\^ole for footnotes in a minipage as |\skip||\footins| does
% for ordinary footnotes.
%
% \begin{macrocode}
\skip\@mpfootins = \skip\footins
% \end{macrocode}
% \end{macro}
%
% \subsubsection{Framed boxes}
%
% \begin{macro}{\fboxsep}
% The space left by |\fbox| and |\framebox| between the box and the
% text in it.
% \begin{macro}{\fboxrule}
% The width of the rules in the box made by |\fbox| and |\framebox|.
% \begin{macrocode}
\setlength\fboxsep{3\p@}
\setlength\fboxrule{.4\p@}
% \end{macrocode}
% \end{macro}
% \end{macro}
%
% \subsubsection{Equation and eqnarray}
%
% \begin{macro}{\theequation}
% When within chapters, the equation counter will be reset at
% the beginning of a new chapter and the equation number will
% be prefixed by the chapter number.
% \changes{v1.3u}{1996/10/31}{Added test for non-zero chapter number}
%
% This code must follow the |\chapter| definition or, more exactly,
% the definition of the chapter counter.
% \begin{macrocode}
%\renewcommand \theequation {\@arabic\c@equation}
%<*report|book>
\@addtoreset {equation}{chapter}
\renewcommand\theequation
{\ifnum \c@chapter>\z@ \thechapter.\fi \@arabic\c@equation}
%
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\jot}
% |\jot| is the extra space added between lines of an eqnarray
% environment. The default value is used.
% \begin{macrocode}
% \setlength\jot{3pt}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@eqnnum}
% The macro |\@eqnnum| defines how equation numbers are to appear in
% equations. Again the default is used.
%
% \begin{macrocode}
% \def\@eqnnum{(\theequation)}
% \end{macrocode}
% \end{macro}
%
% \subsection{Floating objects}
%
% The \LaTeX{} format only defines a number of tools with
% which floating objects can be defined. This is done in the
% document class. It needs to define the following macros for each
% floating object of type \texttt{TYPE} (e.g., \texttt{TYPE} =
% figure).
%
% \begin{description}
% \item[\texttt{\bslash fps@TYPE}]
% The default placement specifier for floats of type
% \texttt{TYPE}.
%
% \item[\texttt{\bslash ftype@TYPE}]
% The type number for floats of type \texttt{TYPE}. Each
% \texttt{TYPE} has associated a unique positive \texttt
% {TYPE} number, which is a power of two. E.g., figures might
% have type number 1, tables type number 2, programs type
% number 4, etc.
%
% \item[\texttt{\bslash ext@TYPE}]
% The file extension indicating the file on which the contents
% list for float type \texttt{TYPE} is stored. For example,
% |\ext@figure| = `lof'.
%
% \item[\texttt{\bslash fnum@TYPE}]
% A macro to generate the figure number for a caption. For
% example, |\fnum@TYPE| == `Figure |\thefigure|'.
%
% \item[\texttt{\bslash @makecaption}{\meta{num}}{\meta{text}}]
% A macro to make a caption, with \meta{num} the value produced
% by |\fnum@...| and \meta{text} the text of the caption. It
% can assume it's in a |\parbox| of the appropriate width.
% This will be used for \emph{all} floating objects.
%
% \end{description}
%
% The actual environment that implements a floating object such as
% a figure is defined using the macros |\@float| and |\end@float|,
% which are defined in the \LaTeX{} format.
%
% An environment that implements a single-column floating object is
% started with |\@float{|\texttt{TYPE}|}[|\meta{placement}|]| of type
% \texttt{TYPE} with \meta{placement} as the placement specifier.
% The default value of \meta{PLACEMENT} is defined by |\fps@TYPE|.
%
% The environment is ended by |\end@float|. E.g., |\figure| ==
% |\@float|{figure}, |\endfigure| == |\end@float|.
%
% \subsubsection{Figure}
%
% Here is the implementation of the figure environment.
%
% \begin{macro}{\c@figure}
% First we have to allocate a counter to number the figures.
%
% In the report and book document classes figures within chapters are
% numbered per chapter.
% \changes{v1.3u}{1996/10/31}{Added test for non-zero chapter number}
% \begin{macrocode}
%<*article>
\newcounter{figure}
\renewcommand \thefigure {\@arabic\c@figure}
%
%<*report|book>
\newcounter{figure}[chapter]
\renewcommand \thefigure
{\ifnum \c@chapter>\z@ \thechapter.\fi \@arabic\c@figure}
%
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\fps@figure}
% \begin{macro}{\ftype@figure}
% \begin{macro}{\ext@figure}
% \begin{macro}{\num@figure}
% Here are the parameters for the floating objects of type `figure'.
% \changes{v1.4e}{2001/05/24}{Replaced tilde with \cs{nobreakspace}
% (pr/3310)}
% \begin{macrocode}
\def\fps@figure{tbp}
\def\ftype@figure{1}
\def\ext@figure{lof}
\def\fnum@figure{\figurename\nobreakspace\thefigure}
% \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
%
% \begin{environment}{figure}
% \begin{environment}{figure*}
% And the definition of the actual environment. The form with the
% |*| is used for double-column figures.
% \begin{macrocode}
\newenvironment{figure}
{\@float{figure}}
{\end@float}
\newenvironment{figure*}
{\@dblfloat{figure}}
{\end@dblfloat}
% \end{macrocode}
% \end{environment}
% \end{environment}
%
% \subsubsection{Table}
%
% Here is the implementation of the table environment. It is very
% much the same as the figure environment.
%
% \begin{macro}{\c@table}
% First we have to allocate a counter to number the tables.
%
% In the report and book document classes tables within chapters are
% numbered per chapter.
% \changes{v1.3u}{1996/10/31}{Added test for non-zero chapter number}
% \begin{macrocode}
%<*article>
\newcounter{table}
\renewcommand\thetable{\@arabic\c@table}
%
%<*report|book>
\newcounter{table}[chapter]
\renewcommand \thetable
{\ifnum \c@chapter>\z@ \thechapter.\fi \@arabic\c@table}
%
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\fps@table}
% \begin{macro}{\ftype@table}
% \begin{macro}{\ext@table}
% \begin{macro}{\num@table}
% Here are the parameters for the floating objects of type `table'.
% \changes{v1.4e}{2001/05/24}{Replaced tilde with \cs{nobreakspace}
% (pr/3310)}
% \begin{macrocode}
\def\fps@table{tbp}
\def\ftype@table{2}
\def\ext@table{lot}
\def\fnum@table{\tablename\nobreakspace\thetable}
% \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
%
% \begin{environment}{table}
% \begin{environment}{table*}
% And the definition of the actual environment. The form with the
% |*| is used for double-column tables.
% \begin{macrocode}
\newenvironment{table}
{\@float{table}}
{\end@float}
\newenvironment{table*}
{\@dblfloat{table}}
{\end@dblfloat}
% \end{macrocode}
% \end{environment}
% \end{environment}
%
% \subsubsection{Captions}
%
% \begin{macro}{\@makecaption}
% The |\caption| command calls |\@makecaption| to format the
% caption of floating objects. It gets two arguments,
% \meta{number}, the number of the floating object and \meta{text},
% the text of the caption. Usually \meta{number} contains a string
% such as `Figure 3.2'. The macro can assume it is called inside a
% |\parbox| of right width, with |\normalsize|.
%
% \begin{macro}{\abovecaptionskip}
% \begin{macro}{\belowcaptionskip}
% These lengths contain the amount of white space to leave above
% and below the caption.
% \begin{macrocode}
\newlength\abovecaptionskip
\newlength\belowcaptionskip
\setlength\abovecaptionskip{10\p@}
\setlength\belowcaptionskip{0\p@}
% \end{macrocode}
% \end{macro}
% \end{macro}
%
% The definition of this macro is |\long| in order to allow more
% then one paragraph in a caption.
% \begin{macrocode}
\long\def\@makecaption#1#2{%
\vskip\abovecaptionskip
% \end{macrocode}
% We want to see if the caption fits on one line on the page,
% therefore we first typeset it in a temporary box.
% \changes{v1.2q}{1994/05/29}{Use \cs{sbox}\cs{@tempboxa} instead of
% \cs{setbox}\cs{@tempboxa}\cs{hbox} to make this colour safe}
% \begin{macrocode}
\sbox\@tempboxa{#1: #2}%
% \end{macrocode}
% We can the measure its width. It that is larger than the current
% |\hsize| we typeset the caption as an ordinary paragraph.
% \begin{macrocode}
\ifdim \wd\@tempboxa >\hsize
#1: #2\par
% \end{macrocode}
% If the caption fits, we center it. Because this uses an |\hbox|
% directly in vertical mode, it does not execute the |\everypar|
% tokens; the only thing that could be needed here is resetting the
% `minipage flag' so we do this explicitly.
% \changes{v1.2x}{1994/12/09}{Due to a change in the way floats are
% handled we need to set the \cs{if@minipage} switch to false}
% \begin{macrocode}
\else
\global \@minipagefalse
\hb@xt@\hsize{\hfil\box\@tempboxa\hfil}%
\fi
\vskip\belowcaptionskip}
% \end{macrocode}
% \end{macro}
%
% \subsection{Font changing}
%
% Here we supply the declarative font changing commands that were
% common in \LaTeX\ version 2.09 and earlier. These commands work
% in text mode \emph{and} in math mode. They are provided for
% compatibility, but one should start using the |\text...| and
% |\math...| commands instead. These commands are defined using
% |\DeclareTextFontCommand|, a command with three arguments: the
% user command to be defined; \LaTeX\ commands to execute in text
% mode and \LaTeX\ commands to execute in math mode.
%
% \changes{v1.0g}{1993/12/12}{Distinguished between compatibility and
% `normal' mode for the font changing commands.}
% \changes{v1.0h}{1993/12/18}{These are now defined in the kernel, so
% use \cs{@renewfontswitch}. Compatibility mode defines
% \cs{@renewfontswitch} to do nothing, so we don't need to check
% for compatibility mode any more.}
% \changes{v1.0j}{1993/12/20}{Added \cs{normalfont} back in the
% definitions of \cs{rm} etc. as this should be the default
% behaviour}
% \changes{v1.2e}{1994/04/14}{\cs{@renewfontswitch} has become
% \cs{DeclareOldFontCommand}}
%
% \begin{macro}{\rm}
% \changes{v1.0f}{1993/12/08}{Macro added}
% \begin{macro}{\tt}
% \changes{v1.0f}{1993/12/08}{Macro added}
% \begin{macro}{\sf}
% \changes{v1.0f}{1993/12/08}{Macro added}
%
% The commands to change the family. When in compatibility mode we
% select the `default' font first, to get \LaTeX2.09 behaviour.
% \begin{macrocode}
\DeclareOldFontCommand{\rm}{\normalfont\rmfamily}{\mathrm}
\DeclareOldFontCommand{\sf}{\normalfont\sffamily}{\mathsf}
\DeclareOldFontCommand{\tt}{\normalfont\ttfamily}{\mathtt}
% \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\bf}
% \changes{v1.0f}{1993/12/08}{Macro added}
% The command to change to the bold series. One should use
% |\mdseries| to explicitly switch back to medium series.
% \begin{macrocode}
\DeclareOldFontCommand{\bf}{\normalfont\bfseries}{\mathbf}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\sl}
% \changes{v1.0f}{1993/12/08}{Macro added}
% \changes{v1.2g}{1994/04/24}{Added warning if used in math mode}
% \begin{macro}{\it}
% \changes{v1.0f}{1993/12/08}{Macro added}
% \begin{macro}{\sc}
% \changes{v1.0f}{1993/12/08}{Macro added}
% \changes{v1.2g}{1994/04/24}{Added warning if used in math mode}
%
% And the commands to change the shape of the font. The slanted and
% small caps shapes are not available by default as math alphabets,
% so those changes do nothing in math mode. However, we do warn the
% user that the selection will not have any effect.One should use
% |\upshape| to explicitly change back to the upright shape.
% \begin{macrocode}
\DeclareOldFontCommand{\it}{\normalfont\itshape}{\mathit}
\DeclareOldFontCommand{\sl}{\normalfont\slshape}{\@nomath\sl}
\DeclareOldFontCommand{\sc}{\normalfont\scshape}{\@nomath\sc}
% \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\cal}
% \changes{v1.0g}{1993/12/12}{Macro added}
% \begin{macro}{\mit}
% \changes{v1.0g}{1993/12/12}{Macro added}
%
% The commands |\cal| and |\mit| should only be used in math mode,
% outside math mode they have no effect. Currently the New Font
% Selection Scheme defines these commands to generate warning
% messages. Therefore we have to define them `by hand'.
% \changes{v1.2w}{1994/12/01}{Now define \cs{cal} and \cs{mit} using
% \cs{DeclareRobustCommand*}}
% \changes{v1.3j}{1995/08/16}{Remove surplus braces}
% \begin{macrocode}
\DeclareRobustCommand*\cal{\@fontswitch\relax\mathcal}
\DeclareRobustCommand*\mit{\@fontswitch\relax\mathnormal}
% \end{macrocode}
% \end{macro}
% \end{macro}
%
% \section{Cross Referencing}
% \subsection{Table of Contents, etc.}
%
% A |\section| command writes a
% |\contentsline{section}{|\meta{title}|}{|\meta{page}|}| command
% on the \file{.toc} file, where \meta{title} contains the
% contents of the entry and \meta{page} is the page number. If
% sections are being numbered, then \meta{title} will be of the
% form |\numberline{|\meta{num}|}{|\meta{heading}|}| where
% \meta{num} is the number produced by |\thesection|. Other
% sectioning commands work similarly.
%
% A |\caption| command in a `figure' environment writes
%
% |\contentsline{figure}{\numberline{|\meta{num}|}{|%
% \meta{caption}|}}{|\meta{page}|}|
%
% on the .\file{lof} file, where \meta{num} is the number produced
% by |\thefigure| and \meta{caption} is the figure caption. It
% works similarly for a `table' environment.
%
% The command |\contentsline{|\meta{name}|}| expands to
% |\l@|\meta{name}. So, to specify the table of contents, we must
% define |\l@chapter|, |\l@section|, |\l@subsection|, ... ; to
% specify the list of figures, we must define |\l@figure|; and so
% on. Most of these can be defined with the |\@dottedtocline|
% command, which works as follows.
%
% |\@dottedtocline{|\meta{level}|}{|\meta{indent}|}{|^^A
% \meta{numwidth}|}{|^^A
% \meta{title}|}{|\meta{page}|}|
%
% \begin{description}
% \item[\meta{level}] An entry is produced only if\meta{ level}
% $<=$ value of the \Lcount{tocdepth} counter. Note,
% |\chapter| is level 0, |\section| is level 1, etc.
% \item[\meta{indent}] The indentation from the outer left margin
% of the start of the contents line.
% \item[\meta{numwidth}] The width of a box in which the section
% number is to go, if \meta{title} includes a |\numberline|
% command.
% \end{description}
%
% \begin{macro}{\@pnumwidth}
% \begin{macro}{\@tocrmarg}
% \begin{macro}{\@dotsep}
% This command uses the following three parameters, which are set
% with a |\newcommand| (so em's can be used to make them depend upon
% the font).
% \begin{description}
% \item[\texttt{\bslash @pnumwidth}] The width of a box in which the
% page number is put.
% \changes{v1.2v}{1994/10/29}{Changed documentation from $!>$ or $!=$ to
% $\ge$}
% \item[\texttt{\bslash @tocrmarg}] The right margin for multiple
% line entries. One wants |\@tocrmarg| $\ge$ |\@pnumwidth|
% \item[\texttt{\bslash @dotsep}] Separation between dots, in mu
% units. Should be defined as a number like 2 or 1.7
% \end{description}
%
% \begin{macrocode}
\newcommand\@pnumwidth{1.55em}
\newcommand\@tocrmarg{2.55em}
\newcommand\@dotsep{4.5}
%\setcounter{tocdepth}{3}
%\setcounter{tocdepth}{2}
% \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
%
% \subsubsection{Table of Contents}
%
% \begin{macro}{\tableofcontents}
% This macro is used to request that \LaTeX{} produces a table of
% contents. In the report and book document classes the tables of
% contents, figures etc. are always set in single-column mode.
%
% \changes{v1.0g}{1993/12/09}{Moved the setting of
% \cs{@restonecolfalse}}
% \changes{v1.4h}{2007/10/19}{Explain why \cs{@mkboth} is inside the heading
% arg for \cs{tableofcontents} (pr/3285 and pr/3984)}
% \begin{macrocode}
\newcommand\tableofcontents{%
%<*report|book>
\if@twocolumn
\@restonecoltrue\onecolumn
\else
\@restonecolfalse
\fi
% \end{macrocode}
% The title is set using the |\chapter*| command, making sure that
% the running head --if one is required-- contains the right
% information.
% \begin{macrocode}
\chapter*{\contentsname
%
% \section*{\contentsname
% \end{macrocode}
% The code for |\@mkboth| is placed inside the heading to avoid any
% influence on vertical spacing after the heading (in some cases). For
% other commands, such as |\listoffigures| below this has been changed from
% the \LaTeX{}2.09 version as it will produce a serious bug if used in
% two-column mode (see, pr/3285). However |\tableofcontents| is always
% typeset in one-column mode in these classes, therefore the somewhat
% inconsistent setting has been retained for compatibility reasons.
% \begin{macrocode}
\@mkboth{%
\MakeUppercase\contentsname}{\MakeUppercase\contentsname}}%
% \end{macrocode}
% The actual table of contents is made by calling
% |\@starttoc{toc}|. After that we restore two-column mode if
% necessary.
% \begin{macrocode}
\@starttoc{toc}%
% \if@restonecol\twocolumn\fi
}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\l@part}
% Each sectioning command needs an additional macro to format its
% entry in the table of contents, as described above. The macro for
% the entry for parts is defined in a special way.
%
% First we make sure that if a pagebreak should occur, it occurs
% \emph{before} this entry. Also a little whitespace is added and a
% group begun to keep changes local.
% \changes{v1.0h}{1993/12/18}{Replaced -\cs{@secpenalty} by
% \cs{@secpenalty}. ASAJ.}
% \changes{v1.2i}{1994/04/28}{Don't print a toc line when the tocdepth
% counter is less then -1}
% \changes{v1.3b}{1995/05/23}{Added missing braces around argument
% to \cs{addpenalty}.}
% \changes{v1.3x}{1997/10/10}{Removed setting of \cs{@tempdima} as
% this macro does not use \cs{numberline} to set the toc line.}
% \changes{v1.4a}{1998/10/12}{we should use \cs{@tocrmarg}; see PR/2881.}
% \begin{macrocode}
\newcommand*\l@part[2]{%
\ifnum \c@tocdepth >-2\relax
% \addpenalty\@secpenalty
% \addpenalty{-\@highpenalty}%
\addvspace{2.25em \@plus\p@}%
% \end{macrocode}
% The macro |\numberline| requires that the width of the box that
% holds the part number is stored in \LaTeX's scratch register
% |\@tempdima|. Therefore we initialize it there even though we do
% not use |\numberline| internally---the value used is quite large
% so that something like |\numberline{VIII}| would still work.
% \changes{v1.4d}{2001/04/21}{Initialize \cs{@tempdima} to some
% sensible value (pr/3327)}
% \begin{macrocode}
\setlength\@tempdima{3em}%
\begingroup
% \end{macrocode}
% We set |\parindent| to 0pt and use |\rightskip| to leave
% enough room for the page numbers.\footnote{^^A
% We should really set \cs{rightskip} to \cs{@tocrmarg} instead
% of \cs{@pnumwidth} (no version of {\LaTeX} ever did this),
% otherwise the \cs{rightskip} is too small.
% Unfortunately this can't be changed in {\LaTeXe} as we don't
% want to create different versions of {\LaTeXe} which produce
% different typeset output unless this is absolutely necessary;
% instead we suspend it for \LaTeX3.}
% To prevent overfull box messages the |\parfillskip| is set to a
% negative value.
% \begin{macrocode}
\parindent \z@ \rightskip \@pnumwidth
\parfillskip -\@pnumwidth
% \end{macrocode}
% Now we can set the entry, in a large bold font. We make sure to
% leave vertical mode, set the part title and add the page number,
% set flush right.
% \begin{macrocode}
{\leavevmode
\large \bfseries #1\hfil
\hb@xt@\@pnumwidth{\hss #2%
% \end{macrocode}
%
% \changes{v1.4i}{2018/09/03}{Prevent protrusion
% (\url{https://tex.stackexchange.com/q/172785/10109})}
% \begin{macrocode}
\kern-\p@\kern\p@}}\par
% \end{macrocode}
% Prevent a pagebreak immediately after this entry, but use
% |\everypar| to reset the |\if@nobreak| switch. Finally we close
% the group.
% \changes{v1.3j}{1995/08/16}{Add missing percent}
% \begin{macrocode}
\nobreak
% \if@compatibility
\global\@nobreaktrue
\everypar{\global\@nobreakfalse\everypar{}}%
% \fi
\endgroup
\fi}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\l@chapter}
% This macro formats the entries in the table of contents for
% chapters. It is very similar to |\l@part|
%
% First we make sure that if a pagebreak should occur, it occurs
% \emph{before} this entry. Also a little whitespace is added and a
% group begun to keep changes local.
% \changes{v1.2i}{1994/04/28}{Don't print a toc line when the tocdepth
% counter is less than 0}
% \changes{v1.3b}{1995/05/23}{Added missing braces around argument
% to \cs{addpenalty}.}
% \changes{v1.4a}{1998/10/12}{we should use \cs{@tocrmarg}; see PR/2881.}
% \begin{macrocode}
%<*report|book>
\newcommand*\l@chapter[2]{%
\ifnum \c@tocdepth >\m@ne
\addpenalty{-\@highpenalty}%
\vskip 1.0em \@plus\p@
% \end{macrocode}
%
% The macro |\numberline| requires that the width of the box that
% holds the part number is stored in \LaTeX's scratch register
% |\@tempdima|. Therefore we initialize it there even though we do
% not use |\numberline| internally (the position as well as the
% values seems questionable but can't be changed without producing
% compatibility problems). We begin a group, and change
% some of the paragraph parameters (see also the remark at
% \cs{l@part} regarding \cs{rightskip}).
% \begin{macrocode}
\setlength\@tempdima{1.5em}%
\begingroup
\parindent \z@ \rightskip \@pnumwidth
\parfillskip -\@pnumwidth
% \end{macrocode}
% Then we leave vertical mode and switch to a bold font.
% \begin{macrocode}
\leavevmode \bfseries
% \end{macrocode}
% Because we do not use |\numberline| here, we have do some fine
% tuning `by hand', before we can set the entry. We discourage but
% not disallow a pagebreak immediately after a chapter entry.
% \begin{macrocode}
\advance\leftskip\@tempdima
\hskip -\leftskip
#1\nobreak\hfil
\nobreak\hb@xt@\@pnumwidth{\hss #2%
% \end{macrocode}
%
% \changes{v1.4i}{2018/09/03}{Prevent protrusion
% (\url{https://tex.stackexchange.com/q/172785/10109})}
% \begin{macrocode}
\kern-\p@\kern\p@}\par
\penalty\@highpenalty
\endgroup
\fi}
%
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\l@section}
% In the article document class the entry in the table of contents
% for sections looks much like the chapter entries for the report
% and book document classes.
%
% First we make sure that if a pagebreak should occur, it occurs
% \emph{before} this entry. Also a little whitespace is added and a
% group begun to keep changes local.
% \changes{v1.0h}{1993/12/18}{Replaced -\cs{@secpenalty} by
% \cs{@secpenalty}. ASAJ.}
% \changes{v1.2i}{1994/04/28}{Don't print a toc line when the tocdepth
% counter is less than 1.}
% \changes{v1.4a}{1998/10/12}{we should use \cs{@tocrmarg}; see PR/2881.}
% \begin{macrocode}
%<*article>
\newcommand*\l@section[2]{%
\ifnum \c@tocdepth >\z@
\addpenalty\@secpenalty
\addvspace{1.0em \@plus\p@}%
% \end{macrocode}
%
% The macro |\numberline| requires that the width of the box that
% holds the part number is stored in \LaTeX's scratch register
% |\@tempdima|. Therefore we put it there. We begin a group, and
% change some of the paragraph parameters (see also the remark at
% \cs{l@part} regarding \cs{rightskip}).
% \begin{macrocode}
\setlength\@tempdima{1.5em}%
\begingroup
\parindent \z@ \rightskip \@pnumwidth
\parfillskip -\@pnumwidth
% \end{macrocode}
% Then we leave vertical mode and switch to a bold font.
% \begin{macrocode}
\leavevmode \bfseries
% \end{macrocode}
% Because we do not use |\numberline| here, we have do some fine
% tuning `by hand', before we can set the entry. We discourage but
% not disallow a pagebreak immediately after a chapter entry.
% \begin{macrocode}
\advance\leftskip\@tempdima
\hskip -\leftskip
#1\nobreak\hfil
\nobreak\hb@xt@\@pnumwidth{\hss #2%
% \end{macrocode}
%
% \changes{v1.4i}{2018/09/03}{Prevent protrusion
% (\url{https://tex.stackexchange.com/q/172785/10109})}
% \begin{macrocode}
\kern-\p@\kern\p@}\par
\endgroup
\fi}
%
% \end{macrocode}
% In the report and book document classes the definition for
% |\l@section| is much simpler.
% \begin{macrocode}
%<*report|book>
\newcommand*\l@section{\@dottedtocline{1}{1.5em}{2.3em}}
%
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\l@subsection}
% \begin{macro}{\l@subsubsection}
% \begin{macro}{\l@paragraph}
% \begin{macro}{\l@subparagraph}
% All lower level entries are defined using the macro
% |\@dottedtocline| (see above).
% \begin{macrocode}
%<*article>
\newcommand*\l@subsection{\@dottedtocline{2}{1.5em}{2.3em}}
\newcommand*\l@subsubsection{\@dottedtocline{3}{3.8em}{3.2em}}
\newcommand*\l@paragraph{\@dottedtocline{4}{7.0em}{4.1em}}
\newcommand*\l@subparagraph{\@dottedtocline{5}{10em}{5em}}
%
%<*report|book>
\newcommand*\l@subsection{\@dottedtocline{2}{3.8em}{3.2em}}
\newcommand*\l@subsubsection{\@dottedtocline{3}{7.0em}{4.1em}}
\newcommand*\l@paragraph{\@dottedtocline{4}{10em}{5em}}
\newcommand*\l@subparagraph{\@dottedtocline{5}{12em}{6em}}
%
% \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
%
% \subsubsection{List of figures}
%
% \begin{macro}{\listoffigures}
% This macro is used to request that \LaTeX{} produces a list of
% figures. It is very similar to |\tableofcontents|.
%
% \changes{v1.0g}{1993/12/09}{Moved the setting of
% \cs{@restonecolfalse}}
% \changes{v1.4c}{2001/01/06}{Moved \cs{@mkboth} out of heading
% arg (pr/3285)}
% \begin{macrocode}
\newcommand\listoffigures{%
%<*report|book>
\if@twocolumn
\@restonecoltrue\onecolumn
\else
\@restonecolfalse
\fi
\chapter*{\listfigurename}%
%
% \section*{\listfigurename}%
\@mkboth{\MakeUppercase\listfigurename}%
{\MakeUppercase\listfigurename}%
\@starttoc{lof}%
% \if@restonecol\twocolumn\fi
}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\l@figure}
% This macro produces an entry in the list of figures.
% \begin{macrocode}
\newcommand*\l@figure{\@dottedtocline{1}{1.5em}{2.3em}}
% \end{macrocode}
% \end{macro}
%
% \subsubsection{List of tables}
%
% \begin{macro}{\listoftables}
% This macro is used to request that \LaTeX{} produces a list of
% tables. It is very similar to |\tableofcontents|.
%
% \changes{v1.0g}{1993/12/09}{Moved the setting of
% \cs{@restonecolfalse}}
% \changes{v1.4c}{2001/01/06}{Moved \cs{@mkboth} out of heading
% arg (pr/3285)}
% \begin{macrocode}
\newcommand\listoftables{%
%<*report|book>
\if@twocolumn
\@restonecoltrue\onecolumn
\else
\@restonecolfalse
\fi
\chapter*{\listtablename}%
%
% \section*{\listtablename}%
\@mkboth{%
\MakeUppercase\listtablename}%
{\MakeUppercase\listtablename}%
\@starttoc{lot}%
% \if@restonecol\twocolumn\fi
}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\l@table}
% This macro produces an entry in the list of tables.
% \begin{macrocode}
\let\l@table\l@figure
% \end{macrocode}
% \end{macro}
%
% \subsection{Bibliography}
%
% \begin{macro}{\bibindent}
% The ``open'' bibliography format uses an indentation of
% |\bibindent|.
% \begin{macrocode}
\newdimen\bibindent
\setlength\bibindent{1.5em}
% \end{macrocode}
% \end{macro}
%
% \begin{environment}{thebibliography}
% The `thebibliography' environment executes the following
% commands:
%
% |\renewcommand{\newblock}{\hskip.11em \@plus.33em \@minus.07em}|\\
% --- Defines the ``closed'' format, where the blocks (major units
% of information) of an entry run together.
%
% |\sloppy| --- Used because it's rather hard to do line breaks in
% bibliographies,
%
% |\sfcode`\.=1000\relax| ---
% Causes a `.' (period) not to produce an end-of-sentence space.
%
% The implementation of this environment is based on the generic
% list environment. It uses the \Lcount{enumiv} counter internally
% to generate the labels of the list.
%
% When an empty `thebibliography' environment is found, a warning
% is issued.
%
% \changes{v1.0i}{1993/12/19}{Corrected definition of thebibliography
% for article}
% \changes{v1.2z}{1995/05/09}{added a missing percent character}
% \changes{v1.3b}{1995/05/23}{Added missing braces in definition
% of thebibliography environment.}
% \changes{v1.3j}{1995/08/16}{remove surplus spaces}
% \changes{v1.3k}{1995/08/27}{Code for openbib changed}
% \changes{v1.3t}{1996/10/05}{Added setting value of \cs{@clubpenalty}}
% \begin{macrocode}
\newenvironment{thebibliography}[1]
%<*article>
{\section*{\refname}%
% \end{macrocode}
% The |\@mkboth| was moved out of the heading argument since at
% least in report and book (twocolumn option) there are definitions
% for |\chapter| which would swallow it otherwise.
% \changes{v1.4c}{2001/01/06}{Moved \cs{@mkboth} out of heading
% arg (pr/3285)}
% \begin{macrocode}
\@mkboth{\MakeUppercase\refname}{\MakeUppercase\refname}%
%
%<*!article>
{\chapter*{\bibname}%
\@mkboth{\MakeUppercase\bibname}{\MakeUppercase\bibname}%
%
\list{\@biblabel{\@arabic\c@enumiv}}%
{\settowidth\labelwidth{\@biblabel{#1}}%
\leftmargin\labelwidth
\advance\leftmargin\labelsep
\@openbib@code
\usecounter{enumiv}%
\let\p@enumiv\@empty
\renewcommand\theenumiv{\@arabic\c@enumiv}}%
\sloppy
% \end{macrocode}
% This is setting the normal (non-infinite) value of
% |\clubpenalty| for the whole of this environment,
% so we must reset its stored value also. (Why is there a |%| after
% the second 4000 below?)
% \begin{macrocode}
\clubpenalty4000
\@clubpenalty \clubpenalty
\widowpenalty4000%
\sfcode`\.\@m}
{\def\@noitemerr
{\@latex@warning{Empty `thebibliography' environment}}%
\endlist}
% \end{macrocode}
% \end{environment}
%
% \begin{macro}{\newblock}
% The default definition for |\newblock| is to produce a small space.
% \changes{v1.3k}{1995/08/27}{Default changed.}
% \begin{macrocode}
\newcommand\newblock{\hskip .11em\@plus.33em\@minus.07em}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@openbib@code}
% The default definition for |\@openbib@code| is to do nothing.
% It will be changed by the \Lopt{openbib} option.
% \changes{v1.3k}{1995/08/27}{Macro added}
% \begin{macrocode}
\let\@openbib@code\@empty
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@biblabel}
% The label for a |\bibitem[...]| command is produced by this
% macro. The default from the \LaTeX{} format is used.
% \begin{macrocode}
% \renewcommand*{\@biblabel}[1]{[#1]\hfill}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@cite}
% The output of the |\cite| command is produced by this macro. The
% default from the \LaTeX{} format is used.
% \begin{macrocode}
% \renewcommand*{\@cite}[1]{[#1]}
% \end{macrocode}
% \end{macro}
%
% \subsection{The index}
%
% \begin{environment}{theindex}
% The environment `theindex' can be used for indices. It makes an
% index with two columns, with each entry a separate paragraph. At
% the user level the commands |\item|, |\subitem| and |\subsubitem|
% are used to produce index entries of various levels. When a new
% letter of the alphabet is encountered an amount of |\indexspace|
% white space can be added.
%
%
% \changes{v1.0g}{1993/12/09}{Moved the setting of
% \cs{@restonecoltrue}}
% \begin{macrocode}
\newenvironment{theindex}
{\if@twocolumn
\@restonecolfalse
\else
\@restonecoltrue
\fi
% \twocolumn[\section*{\indexname}]%
% \twocolumn[\@makeschapterhead{\indexname}]%
\@mkboth{\MakeUppercase\indexname}%
{\MakeUppercase\indexname}%
\thispagestyle{plain}\parindent\z@
% \end{macrocode}
% Parameter changes to |\columnseprule| and |\columnsep| have to be
% done after |\twocolumn| has acted. Otherwise they can affect the
% last page before the index.
% \changes{ v1.4f}{2004/02/16}{Moved setting of \cs{columnsep} and
% \cs{columnseprule} later to avoid affecting the wrong page (pr/3616)}
% \begin{macrocode}
\parskip\z@ \@plus .3\p@\relax
\columnseprule \z@
\columnsep 35\p@
\let\item\@idxitem}
% \end{macrocode}
% When the document continues after the index and it was a
% one-column document we have to switch back to one column after
% the index.
% \begin{macrocode}
{\if@restonecol\onecolumn\else\clearpage\fi}
% \end{macrocode}
% \end{environment}
%
% \begin{macro}{\@idxitem}
% \begin{macro}{\subitem}
% \begin{macro}{\subsubitem}
% These macros are used to format the entries in the index. ^^AA ???
% \changes{v1.3f}{1995/06/23}{Corrected error in definition of
% \cs{@idxitem}.}
% \changes{v1.3j}{1995/08/16}{use \cs{@idxitem} to save space}
% \begin{macrocode}
\newcommand\@idxitem{\par\hangindent 40\p@}
\newcommand\subitem{\@idxitem \hspace*{20\p@}}
\newcommand\subsubitem{\@idxitem \hspace*{30\p@}}
% \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\indexspace}
% The amount of white space that is inserted between `letter
% blocks' in the index.
% \begin{macrocode}
\newcommand\indexspace{\par \vskip 10\p@ \@plus5\p@ \@minus3\p@\relax}
% \end{macrocode}
% \end{macro}
%
% \subsection{Footnotes}
%
% \begin{macro}{\footnoterule}
% Usually, footnotes are separated from the main body of the text
% by a small rule. This rule is drawn by the macro |\footnoterule|.
% We have to make sure that the rule takes no vertical space (see
% \file{plain.tex}) so we compensate for the natural height of the
% rule of 0.4pt by adding the right amount of vertical skip.
%
% To prevent the rule from colliding with the footnote we first add
% a little negative vertical skip, then we put the rule and make
% sure we end up at the same point where we begun this operation.
% \changes{v1.3a}{1995/05/17}{use \cs{@width}}
% \begin{macrocode}
\renewcommand\footnoterule{%
\kern-3\p@
\hrule\@width.4\columnwidth
\kern2.6\p@}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\c@footnote}
% Footnotes are numbered within chapters in the report and book
% document classes.
% \begin{macrocode}
%\@addtoreset{footnote}{chapter}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@makefntext}
% The footnote mechanism of \LaTeX{} calls the macro |\@makefntext|
% to produce the actual footnote. The macro gets the text of the
% footnote as its argument and should use |\@thefnmark| as the mark
% of the footnote. The macro |\@makefntext|is called when
% effectively inside a |\parbox| of width |\columnwidth| (i.e.,
% with |\hsize| = |\columnwidth|).
%
% An example of what can be achieved is given by the following piece
% of \TeX\ code.
% \begin{verbatim}
% \newcommand\@makefntext[1]{%
% \@setpar{\@@par
% \@tempdima = \hsize
% \advance\@tempdima-10pt
% \parshape \@ne 10pt \@tempdima}%
% \par
% \parindent 1em\noindent
% \hbox to \z@{\hss\@makefnmark}#1}
% \end{verbatim}
% The effect of this definition is that all lines of the footnote
% are indented by 10pt, while the first line of a new paragraph is
% indented by 1em. To change these dimensions, just substitute the
% desired value for `10pt' (in both places) or `1em'. The mark is
% flushright against the footnote.
%
% In these document classes we use a simpler macro, in which the
% footnote text is set like an ordinary text paragraph, with no
% indentation except on the first line of a paragraph, and the
% first line of the footnote. Thus, all the macro must do is set
% |\parindent| to the appropriate value for succeeding paragraphs
% and put the proper indentation before the mark.
%
% \changes{v1.1a}{1994/03/13}{Use \cs{@makefnmark} to generate
% footnote marker}
% \begin{macrocode}
\newcommand\@makefntext[1]{%
\parindent 1em%
\noindent
\hb@xt@1.8em{\hss\@makefnmark}#1}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@makefnmark}
% The footnote markers that are printed in the text to point to the
% footnotes should be produced by the macro |\@makefnmark|. We use
% the default definition for it.
% \begin{macrocode}
%\renewcommand\@makefnmark{\hbox{\@textsuperscript
% {\normalfont\@thefnmark}}}
% \end{macrocode}
% \end{macro}
%
% \section{Initialization}
%
% \subsection{Words}
%
% This document class is for documents prepared in the English language.
% To prepare a version for another language, various English words must
% be replaced. All the English words that require replacement are
% defined below in command names. These commands may be redefined in
% any class or package that is customising \LaTeX\ for use with
% non-English languages.
% \changes{v1.3h}{1995/07/20}{Split up to save on save stack /1742}
%
% \begin{macro}{\contentsname}
% \begin{macro}{\listfigurename}
% \begin{macro}{\listtablename}
% \begin{macrocode}
\newcommand\contentsname{Contents}
\newcommand\listfigurename{List of Figures}
\newcommand\listtablename{List of Tables}
% \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\refname}
% \begin{macro}{\bibname}
% \begin{macro}{\indexname}
% \begin{macrocode}
%\newcommand\refname{References}
%\newcommand\bibname{Bibliography}
\newcommand\indexname{Index}
% \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\figurename}
% \begin{macro}{\tablename}
% \begin{macrocode}
\newcommand\figurename{Figure}
\newcommand\tablename{Table}
% \end{macrocode}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\partname}
% \begin{macro}{\chaptername}
% \begin{macro}{\appendixname}
% \begin{macro}{\abstractname}
% \begin{macrocode}
\newcommand\partname{Part}
%\newcommand\chaptername{Chapter}
\newcommand\appendixname{Appendix}
%\newcommand\abstractname{Abstract}
% \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
%
% \subsection{Date}
%
% \begin{macro}{\today}
% This macro uses the \TeX\ primitives |\month|, |\day| and |\year|
% to provide the date of the \LaTeX-run.
%
% At |\begin{document}| this definition will be optimised
% so that the names of all the `wrong' months are not stored.
% This optimisation is not done here as that would `freeze'
% |\today| in any special purpose format made by loading the class
% file into the format file.
% \changes{v1.3j}{1995/08/16}{use \cs{edef} to save a lot of space}
% \changes{v1.3w}{1997/10/06}{use \cs{def} again, latex/2620}
% \begin{macrocode}
\def\today{\ifcase\month\or
January\or February\or March\or April\or May\or June\or
July\or August\or September\or October\or November\or December\fi
\space\number\day, \number\year}
% \end{macrocode}
% \end{macro}
%
% \subsection{Two-column mode}
%
% \begin{macro}{\columnsep}
% This gives the distance between two columns in two-column mode.
% \begin{macrocode}
\setlength\columnsep{10\p@}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\columnseprule}
% This gives the width of the rule between two columns in
% two-column mode. We have no visible rule.
% \begin{macrocode}
\setlength\columnseprule{0\p@}
% \end{macrocode}
% \end{macro}
%
% \subsection{The page style}
% We have \pstyle{plain} pages in the document classes article and
% report unless the user specified otherwise. In the `book'
% document class we use the page style \pstyle{headings} by
% default. We use arabic page numbers.
% \begin{macrocode}
%\pagestyle{plain}
%\pagestyle{headings}
\pagenumbering{arabic}
% \end{macrocode}
%
% \subsection{Single or double sided printing}
%
%
% \changes{v1.2v}{1994/11/10}{removed typo}
% When the \Lopt{twoside} option wasn't specified, we don't try to
% make each page as long as all the others.
% \begin{macrocode}
\if@twoside
\else
\raggedbottom
\fi
% \end{macrocode}
% When the \Lopt{twocolumn} option was specified we call
% |\twocolumn| to activate this mode. We try to make each column as
% long as the others, but call |sloppy| to make our life easier.
% \begin{macrocode}
\if@twocolumn
\twocolumn
\sloppy
\flushbottom
% \end{macrocode}
% Normally we call |\onecolumn| to initiate typesetting in one
% column.
% \begin{macrocode}
\else
\onecolumn
\fi
%
% \end{macrocode}
%
% \changes{v1.3i}{1995/08/09}{Moved code for generic class options
% leqno and fleqn to kernel file}
%
% \Finale
%
\endinput