]> Formatting information A beginner's introduction to typesetting with Peter Flynn Silmaril Consultants Textual Therapy Division March 2005 This document is Copyright © 1999–2005 by Silmaril Consultants under the terms of what is now the GNU Free Documentation License (copyleft). Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.2 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license is included in the section entitled . You are allowed to distribute, reproduce, and modify it without fee or further requirement for consent subject to the conditions in . The author has asserted his right to be identified as the author of this document. If you make useful modifications you are asked to inform the author so that the master copy can be updated. See the full text of the License in . This edition of Formatting Information was prompted by the generous help I have received from users too numerous to mention individually. Shortly after TUGboat published the November 2003 edition, I was reminded by a spate of email of the fragility of documentation for a system like which is constantly under development. There have been revisions to packages; issues of new distributions, new tools, and new interfaces; new books and other new documents; corrections to my own errors; suggestions for rewording; and in one or two cases mild abuse for having omitted package X which the author felt to be indispensable to users. I am grateful as always to the people who sent me corrections and suggestions for improvement. Please keep them coming: only this way can this book reflect what people want to learn. The same limitation still applies, however: no mathematics, as there are already a dozen or more excellent books on the market—as well as other online documents—dealing with mathematical typesetting in and in finer and better detail than I am capable of. The structure remains the same, but I have revised and rephrased a lot of material, especially in the earlier chapters where a new user cannot be expected yet to have acquired any depth of knowledge. Many of the screenshots have been updated, and most of the examples and code fragments have been retested. As I was finishing this edition, I was asked to review an article for , which grew out of the Practical Conference in 2004. The author specifically took the writers of documentation to task for failing to explain things more clearly, and as I read more, I found myself agreeing, and resolving to clear up some specific problems areas as far as possible. It is very difficult for people who write technical documentation to remember how they struggled to learn what has now become a familiar system. So much of what we do is second nature, and a lot of it actually has nothing to do with the software, but more with the way in which we view and approach information, and the general level of knowledge of computing. If I have obscured something by making unreasonable assumptions about your knowledge, please let me know so that I can correct it. Peter Flynn is author of and , and editor of . The text is written and maintained in DocBook with a customization layer for typographics. is used to generate (for the Web and plain-text versions) and (for and PostScript). The November 2003 edition was published in . This edition contains extensive revisions and simplifications to the text, and many corrections to the way in which the packages and their capabilities are presented. 3.6 March 2005 Since the publication of the November 2003 edition in , several new books on have been released, and this edition reflects some of the new material and approaches contained in them. See the Bibliography for details of these publications. The only technical change has been to use empty elements for the , , and other logos instead of the more usual entities so that the HTML version can use CSS to produce better logos. Thanks to whoever wrote the CSS for 4ht, which is where I found the styles. 3.5 July 2004 Modified DTD to add span element type to allow use of external entities for formatted , , and other logos in the HTML version. Changed entity declaration in the internal subset to enable this, and switched declarations and marked sections in the DTD. This now means it needs Saxon 7 or 8 to process, as Saxon 6 does not handle parameter entities values used as parameter entity declarations. 3.4 November 2003 Applied all Barbara Beeton's corrections (see separate emails) and rewrote a few formatting macros to allow the document to fit more easily into US Letter shape. It would be nice if it would also format for A5 so that it could become a paperback but that's another day's work. Started on writing the missing sections (Installing Type 1 Fonts and Going beyond , but these are not finished yet) and rewrote entirely the existing (non-) Type 1 font installation procedure in line with the new (unreleased) Gutta-Percha script. Added hidden meanings for Compact Disc Read-Only Memory, Digital Versatile Disk, International Business Machines. 3.3 August 2003 Fixed bug which wrongly lettered appendices. Fixed problem which called wrong font for examples of Times and Helvetica (thanks to William Adams). Updated numerous typos, added comments about pdftex option to color. Rewrote formatting for TUGboat. 3.2 March 2003 Finished rewrite. Revised and expanded almost everything. 3.1 August 2002 Recast in DocBook and reworded some sections. Started the big rewrite. Contents Introduction This book originally accompanied a 2-day course on using the typesetting system. It has been extensively revised and updated and can now be used for self-study or in the classroom. It is aimed at users of Linux, Macintosh, or Microsoft Windows but it can be used with systems on any platform, including other Unix workstations, mainframes, and even your Personal Digital Assistant.
Who needs this book? The audience for the original training course was assumed to be computer-literate and composed of professional, business, academic, technical, or administrative computer users. The readers of the book (you) are mostly assumed to be in a similar position, but may also come from many other backgrounds, including hobbyists, students, and just people interested in quality typesetting. You are expected to have one or more of the following or similar objectives: producing typesetter-quality formatting; formatting long, complex, highly-structured, repetitive, or automatically-generated documents; can easily be used for once-off or short and simple documents as well, but its real strengths lie in consistency and automation. saving time and effort by automating common tasks; achieving or maintaining your independence from specific makes or models of proprietary hardware, software, or file formats (portability); using Open Source software (free of restrictions, sometimes also free of charge).
Skills needed is a very easy system to learn, and requires no specialist knowledge, although literacy and some familiarity with the publishing process is useful. It is, however, assumed that you are completely fluent and familiar with using your computer before you start. Specifically, effective use of this document requires that you already know and understand the following very thoroughly: how to use a good plain-text editor (not a wordprocessor like OpenOffice, WordPerfect, or Microsoft Word, and not a toy like Microsoft Notepad); 2.1.3 where to find all 95 of the printable characters on your keyboard and what they mean, and how to type accents and symbols, if you use them; 3.2.1.2 how to create, open, save, close, rename, move, and delete files and folders (directories); 2.3 how to use a Web browser and/or File Transfer Protocol program to download and save files from the Internet; 7.3.1.6 how to uncompress and unwrap (unzip or detar) downloaded files. 2.3.7 If you don't know how to do these things yet, it's important to go and learn them first. Trying to become familiar with the fundamentals of using a computer at the same time as learning is not likely to be as effective as doing them in order. These are not specialist skills—they are all included in the European Computer Driving Licence and the relevant sections of the syllabus are noted in the margin above, so they are well within the capability of anyone who uses a computer.
Objectives of this book By the end of this book, you should be able to undertake the following tasks: use a plain-text editor to create and maintain your documents; add markup to identify your document structure and formatting requirements; typeset documents, correct simple formatting errors, and display or print the results; identify, install, and use additional packages (using for downloading where necessary); recognise the limitations of procedural markup systems and choose appropriate generic markup methods where appropriate.
Synopsis The original course covered the following topics as separate sessions, which are represented in the book as chapters: Where to get and how to install (te, fp, or prot from the Collection disks); Live Collection How to type documents: using an editor to create files (half a dozen editors for ); Basic structures (the Document Class Declaration and its layout options; the document environment with sections and paragraphs); Typesetting, viewing, and printing; The use of packages and to adapt formatting using standard tools; Other document structures (lists, tables, figures, images, and verbatim text); Textual tools (footnotes, marginal notes, cross-references, indexes and glossaries, and bibliographic citations); Typographic considerations (white-space and typefaces; inline markup and font changes; extra font installation and automation); Programmability and automation (macros and modifying 's behaviour); Conversion and compatibility with other systems (, Word, &etc;). A few changes have been made in the transition to printed and online form, but the basic structure is the same, and the document functions as a workbook for the course as well as a standalone self-teaching guide.
Where's the math? It is important to note that the document does not cover mathematical typesetting, complex tabular material, the design of large-scale macros and document classes, or the finer points of typography or typographic design, although it does refer to these topics in passing on a few occasions. mathematics There are several other guides, introductions, and get-started documents on the Web and on which cover these topics and more. Among the more popular are: , where all beginners should start; is a good beginner's tutorial; is a classic tutorial on Plain ; shows you how to do (almost) anything with graphics: side-by-side, rotated, &etc;; gets you started with the American Math Society's powerful packages; shows over 2,500 symbols available. This list was taken from the search page. There are also lots of books published about and : the most important of these for users of this document are listed in .
Availability of <LaTeX/> systems Because the program (the engine which actually does the typesetting) is separate from whichever editor you choose, -based systems are available in a variety of different modes using different interfaces, depending on how you want to use them.
Graphical interface The normal way to run is to use a toolbar button (icon), a menu item, or a keystroke in your editor. Click on it and your document gets saved and typeset. All the other features of systems (the typeset display, spellchecker, related programs like makeindex and ) are run the same way. This works both in a normal Graphical User Interface as well as in text-only interfaces. In the popular editors like Emacs, shell, nicCenter, WinShell, or WinEdt, a record of the typesetting process is shown in an adjoining window so that you can see the progress of pages being typeset, and any errors or warnings that may occur. Recent versions of some editors hide this display by default unless errors occur in the typesetting.
Command-line interface However, the graphical interface is useless if you want to run unattended, as part of an automated system, perhaps in a web server or e-commerce environment, where there is no direct connection between user and program. The underlying engine is in fact a Command-Line Interface program, that is, it is used as a console program which you run from a standard Unix or Mac terminal or shell window (or from an MS-DOS command window in Microsoft Windows systems). You type the command latex followed by the name of your document file (see in for an example). Commands like these let you run in an automated environment like a Common Gateway Interface script on a web server or a batch file on a document system. All the popular distributions for Unix and Windows, both free and commercial, include this interface as standard (te, fp, MiK, prot, PC-, True, &etc;).
Typeset displays usually displays your typeset results in a separate window, redisplayed automatically every time the document is reprocessed, because the typesetting is done separately from the editing. Some systems, however, can format the typesetting while you type, at the expense of some flexibility. Asynchronous typographic displays This method is called an asynchronous typographic display because the typeset window only updates after you have typed something and reprocessed it, not while you are still typing, as it would with a wordprocessor. Among other reasons, typesets whole paragraphs at a time, not line-by-line as lesser systems do, in order to get the hyphenation and justification (H&ers;J) right (see ). Synchronous typographic displays Some distributions of offer a synchronous typographic interface. In these, you type directly into the typographic display, as with a wordprocessor. Three popular examples are Textures, Scientific Word, and V (see table below). At least one free version (, see in ) offers a similar interface. With a synchronous display you get Instant Textual Gratification™, but your level of control is restricted to that of the you use, which cannot provide access to everything that can do. For complete control of the formatting you may still need access to your normal source (input) file in the same way as for asynchronous implementations. Near-synchronous displays There are several other methods available free for Unix and some other systems for close-to-synchronous updates of the typeset display (including Jonathan Fine 's Instant Preview and the daemon), and for embedding typographic fragments from the typeset display back into the editor window ( David Kastrup 's preview-latex package).
Commercial distributions Whatever method you choose, the Collection CD and are not the only source of software. The vendors listed in offer excellent commercial implementations of and , and if you are in a position where their enhanced support and additional features are of benefit, I urge you to support them. In most cases their companies, founders, and staff have been good friends of the and communities for many years. commercial implementations Popular commercial implementations of <TeX/> systems Product Platform Company URI PC MS-Windows Personal , Inc True MS-Windows True Textures Apple Mac Blue Sky Research Scientific Word MS-Windows Mackichan Software V MS-Windows, Linux, OS/2 MicroPress, Inc
Production note This document is written and maintained in , using a customized version of the DocBook . Conversions were made to and using scripts and Michael Kay 's Saxon processor. The complete source, with all ancillary files, is available online at but if you want to try processing it yourself you must install Java (from Sun, , or a number of others) and Saxon (from ), in addition to . This document is published under the terms and conditions of the Free Documentation License. Details are in .
Symbols and conventions The following typographic notations are used: Notation Meaning command Control sequences which perform an action, ⪚ newpage length Control sequences which store a dimension (measurement in units), ⪚ parskip counter Values used for counting (whole numbers, as opposed to measuring in units), ⪚ secnumdepth term Defining instance of a new term environment A formatting environment package A package (available from ) product Program or product name typewriter type Examples of source code (stuff you type) mybook or value Mnemonic examples of things you have to supply real-life values for x A key on your keyboard Ctrl x Two keys pressed together Escq Two keys pressed one after another Submit On-screen button to click MenuItem Drop-down menu with items Examples of longer fragments of input are shown with a border round them. Where necessary, the formatted output is shown immediately beneath. Warnings are shown with a shaded background. Exercises are shown with a double border.
Foreword As noted in , this document accompanies a two-day introductory training course. It became obvious from repeated questions in class and afterwards, as well as from general queries on that many people do not read the s, do not use the web site, do not buy the books and manuals, do not use the newsgroups and mailing lists, and do not download the free documentation. Instead, they try to get by using the training technique known as sitting by Nelly, which involves looking over a colleague's shoulder in the office, lab, library, pub, or classroom, and absorbing all his or her bad habits. In the summer of 2001 I presented a short proposal on the marketing of to the annual conference of the Users Group held at the University of Delaware, and showed an example of a draft brochure designed to persuade newcomers to try for their typesetting requirements. As a result of questions and suggestions, it was obvious that it needed to include a pointer to some documentation, and I agreed to make available a revised form of this document, expanded to be used outside the classroom, and to include those topics on which I have had most questions from users over the years. It turned out to mean a significant reworking of a lot of the material. Some of it appears in almost every other manual and book on but it is essential to the beginner and therefore bears repetition. Some of it appears other forms elsewhere, and is included here because it needs explaining better. And some of it appears nowhere else but this document. I took the opportunity to revise the structure of the training course in parallel with the book (expanding it from its original one day to two days), and to include a more comprehensive index. It is by no means perfect (in both senses), and I would be grateful for comments and corrections to be sent to me at the address given under the credits. I had originally hoped that the version of the document would be processable by any freshly-installed default system, but the need to include font samples which go well beyond the default installation, and to use some packages which the new user is unlikely to have installed, means that this document itself is not really a simple piece of , however simply it may describe the process itself. However, as the careful reader will have already noticed, the master source of the document is not maintained in but in . A future task is therefore to compare the packages required with those installed by default, and flag portions of the document requiring additional features so that an abbreviated version can be generated which can be guaranteed to process even with a basic installation. If you are just starting with , at an early opportunity you should buy or borrow a copy of which is the original author's manual. More advanced users should get the or one of its successors. In the same series there are also the and the . Mathematical users might want to read . Preface Many people discover after years of struggling with wordprocessors and desktop publishing systems, and are amazed to find that has been around for over 25 years and they hadn't heard of it. It's not a conspiracy, just a well-kept secret known only to a few million people, as one anonymous user has put it. Perhaps a key to why it has remained so popular is that it removes the need to fiddle with the formatting while you write. Although playing around with fonts and formatting is attractive to the newcomer, it is completely counter-productive for the serious author or editor who wants to concentrate on writing—ask any journalist or professional writer. A few years ago a new user expressed concern on the newsgroup about learning to write in . Some excellent advice was posted in response to this query, which I reproduce with permission below [the bold text is my emphasis]:
No, the harder part might be writing, period. / is actually easy, once you relax and stop worrying about appearance as a be-all-and-end-all. Many people have become Word Processing Junkies and no longer write documents, they draw them, almost at the same level as a pre-literate 3-year old child might pretend to write a story, but is just creating a sequence of pictures with a pad of paper and box of Crayolas—this is perfectly normal and healthy in a 3-year old child who is being creative, but is of questionable usefulness for, say, a grad student writing a Master's or PhD thesis or a business person writing a white paper, &etc; For this reason, I strongly recommend not using any sort of fancy  crutch. Use a plain vanilla text editor and treat it like an old-fashioned typewriter. Don't waste time playing with your mouse. Note: I am not saying that you should have no concerns about the appearance of your document, just that you should write the document (completely) first and tweak the appearance later…not [spend time on] lots of random editing in the bulk of the document itself.
Learning to write well can be hard, but authors shouldn't have to make things even harder for themselves by using manually-driven systems which break their concentration every few seconds for some footling adjustment to the appearance, simply because the software is incapable of doing it right by itself. Don Knuth originally wrote to typeset mathematics for the second edition of his master-work , and it remains pretty much the only typesetting program to include fully-automated mathematical formatting done the way mathematicians want it. But he also published a booklet called which shows how important it is to think about what you write, and how the computer should be able to help, not hinder. And is much more than math: it's a programmable typesetting system which can be used for almost any formatting task, and has made it usable by almost anyone. Professor Knuth generously placed the entire system in the public domain, so for many years there was no publicity of the commercial kind which would have got noticed outside the technical field. Nowadays, however, there are many companies selling software or services, See, for example, the list of vendors on , and the list of consultants published by . dozens of publishers accepting documents for publication, and hundreds of thousands of users using for millions of documents. A guesstimate. With free software it's impossible to tell how many people are using it, but it's a lot. To count yourself as a or user, visit the Users Group's Counter web site (and get a nice certificate!). There is occasionally some confusion among newcomers between the two main programs, and : is a typesetting program, originally written by Prof Knuth at Stanford around 1978. It implements a macro-driven typesetters' programming language of some 300 basic operations and it has formed the core of many other desktop publishing systems. Although it is still possible to write in the raw language, you need to study it in depth, and you need to be able to write macros (subprograms) to perform even the simplest of repetitive tasks. is a user interface for , designed by Leslie Lamport at Digital Equipment Corporation in 1985 to automate all the common tasks of document preparation. It provides a simple way for authors and typesetters to use the power of without having to learn the underlying language. is the recommended system for all users except professional typographic programmers and computer scientists who want to study the internals of . Both and have been constantly updated since their inception. Knuth has now frozen development of the engine so that users and developers can have a virtually bug-free, rock-stable platform to work with. Knuth still fixes bugs, although the chances of finding a bug in these days approaches zero. Typographic programming development continues with the New Typesetting System, planned as a successor to . The 3 project has taken over development of , and the current version is , which is what we are concentrating on here. Details of all developments can be had from the at Debunking the mythology Naturally, over all the years, a few myths have grown up around , often propagated by people who should know better. So, just to clear up any potential misunderstandings… MYTH: has only got one font Most systems can use any OpenType, TrueType, Adobe (PostScript) Type1 or Type3, or &metafont; font. This is more than most other known typesetting system. 's default font is Computer Modern (based on Monotype Series 8: see ), not Times Roman, and some people get upset because it looks different to Times. Typefaces differ: that's what they're for—get used to it. MYTH: isn't Simply not true. and preview is better than any wordprocessor and most systems. What people mean is that 's typographic display is asynchronous with the edit window. This is only true for the default implementations. See for details of synchronous versions. MYTH: is obsolete Quite the opposite: it's under constant development, with new features being added almost weekly. Check the for messages about recent uploads to . It's arguably more up-to-date than most other systems: had the Euro (&EUR;) before anyone else, it had Inuktitut typesetting before the Inuit got their own province in Canada, and it still produces better mathematics than anything else. More mythology MYTH: is a Unix system People are also heard saying: is a Windows system, is a Mac system, &etc;, &etc; ad nauseam. systems run on almost every computer in use, from some of the biggest supercomputers down to handhelds (s like the Sharp Zaurus). That includes Windows and Linux PCs, Macs, and all other Unix systems. If you're using something doesn't run on, it must be either incredibly new, incredibly old, or unbelievably obscure. MYTH: is too difficult This has been heard from physicists who can split atoms; from mathematicians who can explain why π exists; from business people who can read a balance sheet; from historians who can grasp Byzantine politics; from librarians who can understand LoC and MARC; and from linguists who can decode Linear B. It's nonsense: most people grasp in 20 minutes or so. It's not rocket science (or if it is, I know any number of unemployed rocket scientists who will teach it to you). MYTH: is only for scientists and mathematicians Untrue. Although it grew up in the mathematical and computer science fields, two of its biggest growth areas are in the humanities and business, especially since the rise of brought new demands for automated web-based typesetting.
Installing <TeX/> and <LaTeX/> te fp nicCenter MiK Linux Unix Microsoft Windows Mac OS X Apple Mac OS X This course is based on using one of the following distributions of on the 2004 Collection DVD or the 2003 Live CD: te for Linux and other Unix-like systems, including Mac OS X ( Thomas Esser ); prot for Microsoft Windows ( Thomas Feuerstack ), based on Christian Schenk's Mik; fp for Microsoft Windows ( Fabrice Popineau ) from the 2003 Live CD. Many other implementations of , such as Tom Kiffe 's CMac for the Apple Macintosh, can be downloaded from . is included with all modern distributions of . The Collection CD is issued annually on behalf of most of the local user groups around the world (see for addresses), and edited by Sebastian Rahtz , Karl Berry , Manfred Lotz , and the authors of the software mentioned above. These people give an enormous amount of their personal time and energy to building and distributing these systems, and they deserve the thanks and support of the user community for all they do. There are many other distributions of both free and commercial, as described in : they all process identically, but there are some differences in size, speed, packaging, and (in the case of commercial distributions) price, support, and extra software provided. One final thing before we start: publicly-maintained software like is updated faster than commercial software, so always check to see if there is a more recent version of the installation. See for more details. Editing and display When you install you will have the opportunity to decide which plain-text editor[s] you want to use to create and maintain your documents which preview programs you want to use to see your typesetting . This isn't much use to you if you're unfamiliar with editors and previewers, so have a look at the table below, and maybe flip ahead to for a moment, where there are descriptions and screenshots. The best bet is probably to install more than one—if you've got the disk space—or maybe all of them, because you can always delete the ones you don't like. Editors There is a wide range of editors available: probably no other piece of software causes more flame-wars in Internet and other discussions than your choice of editor. It's a highly personal choice, so feel free to pick the one you like. My personal biases are probably revealed below, so feel equally free to ignore them. Previewers For displaying your typesetting before printing, you will need a previewer. All systems come with a previewer for standard , but if you are intending to produce industry-standard PostScript or (Adobe Acrobat) files you will need a previewer for those formats. GSview displays both PostScript and files; xpdf and Adobe's own Acrobat Reader just display files. For brief details of some of the most popular editors used for , see . Additional downloads For licensing reasons, the GSview PostScript/PDF previewer, the Acrobat Reader PDF previewer, and the WinEdt editor could not be distributed on the 2003 CDs. In those cases you have to download and install them separately. GSview is available for all platforms from (on Unix and VMS systems it's also available as GhostView and gv: see ) Acrobat Reader (all platforms) can be downloaded from WinEdt (Microsoft Windows only) comes from Installation for Linux and Unix Make sure your system libraries and utilities are up to date. If you are using Red Hat Linux, use yum or up2date to download and install updates. For Debian and other distributions, use apt-get or similar. On Red Hat systems, remove any RPM version of te and associated utilities which may have been preinstalled, in order to avoid version conflicts. If you are installing Live to a new partition, and you have the opportunity to reformat the partition before use, use mkfs with a granularity as small as it will go (usually 1024 bytes). This avoids the partition running out of inodes because uses very large numbers of very small files. Plan the installation carefully if you are installing for multiple users (a shared machine): read for some comments on where to put additional files downloaded later, and see the FAQ on the same topic at Above all, Read The Fine Manual. The documentation is in live.html and live.pdf on the disk in the directory texlive2004/texmf-doc/doc/english/texlive-en/
<TeX/> Live installation manual
# cd /mnt/cdrom/texlive2004 # sh install-tl.sh The installer runs in a shell window, so it can be done even from headless systems (those with no X Window client), but it does need to be installed as root if you want to stick with the default directory locations or install it system-wide for multiple users. To install, just type the commands shown above. The options are mostly self-explanatory, and beginners should pick the recommended scheme and leave all other settings at their defaults. The character-driven interface lets you browse around the settings changing things and looking at options before you commit to installing anything.
The Unix installation program TeX Live installation procedure <================= ===> Note: Letters/digits in indicate menu items <=== ===> for commands or configurable options <=== Proposed platform: Intel x86 with GNU/Linux

over-ride system detection and choose platform binary systems: 1 out of 10 Installation scheme (scheme_recommended) [customizing installation scheme: standard collections language collections] 20 out of 75, disk space required: 246857 kB directories: TEXDIR (The main TeX directory) : /usr/TeX TEXMFLOCAL (Directory for local styles etc): /usr/TeX/texmf-local VARTEXMF (Directory for local config) : /usr/TeX/texmf-var options: [ ] alternate directory for generated fonts () [ ] create symlinks in standard directories [ ] do not install macro/font doc tree [ ] do not install macro/font source tree do not install files, set up to run off CD or DVD start installation help, quit Enter command: ]]>

Collections (the C and L options) are groups of packages that you can include or exclude. It's best to leave this alone unless you know you need something specific. The only options I sometimes set are under O: the alternate directory for generated fonts may need to be on a different partition for performance reasons on a shared system; and I always select create symlinks in standard directories so that the system works immediately after the post-installation configuration (after installation, run texconfig to adjust your local settings.
Running the post-installation program <productname>texconfig</productname>
Note that the Linux/Unix installation does not install any editors: it is assumed you can do this yourself from your distribution's standard package system (most likely you will already be using Emacs or vi anyway).
Installation for Apple Mac This is exactly the same interface as for the Linux/Unix installation. You need the bash shell (see the warning in the manual for users of older systems). There is a choice of graphical editors for the Mac: two are included on the DVD, Shop and IMac, but they need to be installed separately, after installing . Installation for Microsoft Windows
<TeX/> Collection 2004 DVD
Before you install , make sure you have enough disk space: the default installation takes about 350Mb on a modern filesystem. The installation assumes you have a fully updated version of Windows, so visit the Microsoft Web site first () and click on Windows Update. Select and install all the relevant updates for your operating system (Windows 95, 98, ME, 2000, NT, or XP). You should be doing this regularly anyway, to keep your system healthy. You may want to run ScanDisk and give your hard disks a full surface check. consists of a very large number of quite small files, so it's important that your disk is in good order. When you insert the distribution DVD or CD, it should start the setup program automatically. If you have auto-run turned off, open My Computer, double-click on the DVD or CD drive, and then double-click Autorun to start the setup program. Some builds of Windows seem to have a bug that stops Autorun starting the installation. In that case (for the Collection 2004 DVD) double-click Setup.exe instead, or (for the Collection 2003 CD) go to the tpm folder and double-click on TeXSetup.exe. pro<TeX/>t (<TeX/> Collection 2004) For prot from the Collection DVD, follow the instructions in the PDF documentation which opens automatically when you start the setup.
pro<TeX/>t comes with its own installation guide
The documentation contains links (in large blue type) that you click on in sequence to run the installation process. (This is actually very good: everything worked first time when I did it on XP.) Basically, you need to install MIK either WinEdt (with or without some of its add-ons) or nicCenter GhostScript and GSview . You only need to install items to if you install WinEdt.
First document in <productname><TeX/>nicCenter</productname>
Install <productname>MIK<TeX/></productname> prot uses the MIK distribution as its core, a long-established and popular distribution for Windows. Install <productname>WinEdt</productname> This is optional: it's a good editor, especially for the heavy user of a MIK-based system. This is a free month's trial—after that it reminds you to cough up and register. Install the <productname>WinEdt</productname> New <LaTeX/> Document Interface Optional again, and only applicable if you installed WinEdt anyway. It lets you save commonly-used document settings for use in other documents of the same type. Install the <productname>WinEdt</productname> Graphics Interface Another optional add-on for WinEdt to provide drag-and-drop graphics insertion. Install the <productname>WinEdt</productname> Table Designer Last optional add-on for WinEdt, providing a new table editor. Install <productname><TeX/>nicCenter</productname> This is a free equivalent to WinEdt. The interface is slightly different (see ) but it is becoming very popular. Install <productname>GhostScript</productname> and <productname>GSview</productname> These are essential for viewing the PostScript and PDF output, especially if you don't have any other PDF viewer installed. You get a choice of editors, but the one which features in prot is nicCenter. This is an Integrated Development Environment which lets you manage all the files related to each document. In many cases, of course, you'll only have one (the text itself) but if you are working with anything beyond simple articles, you'll probably have illustrations (images or diagrams), and possibly separate chapter files for larger documents, plus indexes, glossaries, bibliographies, etc. I recommend that you create a new project for each new document, even if it's a single-file article, as I did for the example in .
<TeX/> Live (<TeX/> Collection 2003) Once the installation program is running: <LaTeX/> Install itself from the TeXLive SoftwareInstall on Hard Disk menu. If you're new to , pick Quick Install on the following screen. This gives you everything you need to get started, and doesn't ask any questions, it just installs it all straight away. If you're installing under Windows NT, 2000, or XP, you may want to click on the option to install for all users if you have other users on your system. If you want to use Emacs as your editor, click the option for Xem Support. Note this unfortunate choice of name is nothing to do with Eberhard Matthes ' MS-DOS implementation of called em—the Xem is short for Xemacs. Emacs After installation, right-click and drag Xemacs.exe from the C:\Program Files\TeXLive\bin\win32 folder out onto your desktop and let go, then pick Create Shortcut. This places Emacs on your desktop for easy access. WinShell and WinEdt If you want to install WinShell, run the installer program in the support/winshell directory. For WinEdt you must go to their Web site () for a downloadable version. You don't have to install just one editor: if you've got the space, install them all so you can try them out. You can always uninstall the ones you don't want afterwards. GSView Ghostscript is installed automatically, but for GSView you need to go to , and download the most recent version. If you use GSView, please register your copy with Ghostgum, Pty. (). Please read the Live update pages at for details of any changes since the disks were released, and download and install any additional software required. Installation problems It's always annoying when a program that's supposed to install painlessly causes trouble, and none the more so when everyone else seems to have been able to install it without problems. I've installed hundreds of times and very rarely had any difficulties, but these are a few of the occasions when I did. Bad hard disks As recommended in , run a scan and defragmentation of your hard disk[s] before you start. It should take under an hour on a modern machine unless you have a very large disk, and it may need overnight on an older machine. Clean your CD or DVD drive if it's been in heavy use. uses a very large number of very small files, so there is a lot of disk activity during an installation. As also recommended in , if you have the chance to reformat the hard disk, pick the smallest granularity (cluster size) possible. Registry errors This only affects Microsoft Windows users. The Registry is where Microsoft want software companies automatically to store details of all the programs you install. Unfortunately the Registry is grossly abused by marketing departments to try and foist undesirable links on you, the user. You will see this with many commercial programs, where a particular type of file you've been able to double-click on for years suddenly runs a different program. Some programs install obsolete or broken copies of program libraries (DLL files), overwriting ones which were working perfectly. Worse, the viruses, trojans, and worms which typically infect unprotected Windows systems can leave unwanted links to web pages, or change some of the ways in which Windows operates. The overall effect can be that the whole machine slows down, or that files which are expected to do one thing do another. The best solution is a thorough Registry clean-out, using one of the many programs available for the purpose. Use the latest versions Before installing, check the web site ( for any updated copy of the installation program. This is called install-tl.sh for Linux and Mac systems, and Setup.exe for Microsoft Windows (on the Collection 2003 CD it was called TeXSetup.exe). Just occasionally a bug slips through onto the production CD or DVD, and although it's always fixed and notified on , that's a high-volume newsgroup and even the sharpest eyes may miss an announcement. Stick to the defaults Unless you're a computer scientist or a software engineer, I suggest you never change or fiddle with the default directories for installation. I know some of them look odd, but they're that way for a purpose, especially when it comes to avoiding directories will spaces in their names, like the notorious C:\Program Files. Although most modern systems cope happily with spaces in filenames and directory names, they are usually A Bad Design Idea, and should be avoided like the plague (spaces are forbidden in web addresses for the same reason: the people who designed them knew the pitfalls). It may look snazzier to put the installation in My Cute Stuff, but please don't: you'll just make it harder to find, harder to fix problems, and more embarrassing if you have to explain it to someone else trying to help you.
Using your editor <?LaTeX \newline{}?>to create documents documents are all plain-text files. Plain-text originally meant just the 95 printable characters of the American Standard Code for Information Interchange—see —but now more commonly includes both these and the relevant 8-bit characters from one (only) character set such as ISO-8859-1 (Western Latin–1) or ISO-8859-15 (Western Latin plus the Euro sign). These are international standards which work everywhere: you should avoid using manufacturers' proprietary character sets like Microsoft Windows–1252 or Apple Macintosh Roman–8, because they may make your documents unusable on some other systems. You can edit them with any editor, and transfer them to any other computer system running and they will format exactly the same. Because they are plain text they cannot corrupt your system, as they cannot be used for hiding or transporting virus infections as binary wordprocessor files can. Everything you can see is in the file and everything in the file is there for you to see: there is nothing hidden or secret and there are no manufacturers' proprietary gotchas like suddenly going out of date with a new version. Markup In a document, you type your text along with markup which identifies the important parts of your document by name, for example title, section, figure, &etc; does all the formatting for you automatically, using the markup to guide its internal rules and external stylesheets for typesetting. Markup This is a term from printing, and originally meant the notes on how to lay the document out, or the instructions which a proofreader might add during correction. It now also means instructions or descriptions added to a computer document to act as guidelines for identification or formatting. Markup has been around for ages. .h1 Interest Rates Runoff c.1970 \section{Interest Rates} 1984 Interest Rates...]]> 1985 Interest Rates]]> 1991 You do not need to format any of your text in your editor, because does it all by itself when it typesets. You can of course regularise or neaten its appearance in your editor for ease of editing (for example, keeping each item in a list on a separate line), but this is not required. You will often hear markup referred to as commands or sometimes control sequences (the proper nical term for them). For all practical purposes these terms all mean the same thing. This course assumes that users have one of shell, nicCenter, WinShell, or WinEdt (Windows only), or Emacs or (any platform) installed. These are discussed briefly in , and the menus and toolbars for running are explained in . Quick start for the impatient If you already know all this stuff about editors and plain-text files and running programs, and you know your system is already correctly installed (including your editor), you'd probably like to type something in and see do its job. If you don't, then skip forward to and read a bit more about first.
Sample document \documentclass[12pt]{article} \usepackage{palatino,url} \begin{document} \section*{My first document} This is a short example of a \LaTeX\ document I wrote on \today. It shows a few simple features of automated typesetting, including \begin{itemize} \item setting the default font size to 12pt; \item specifying `article' type for formatting; \item using the Palatino typeface; \item adding special formatting for URIs; \item formatting a heading in `section' style; \item using the \LaTeX\ logo; \item generating today's date; \item formatting a list of items; \item centering and italicizing; \item autonumbering the pages. \end{itemize} \subsection*{More information} This example was taken from `Formatting Information', which you can download from \url{http://www.ctan.org/tex-archive/info/beginlatex/} and use as a teach-yourself guide. \begin{center} \textit{Have a nice day!} \end{center} \end{document}
Up and running in a few minutes Install the software Make sure you have a properly-installed system and a copy of a suitable editor. Create a sample document Open your editor and type in the text exactly as shown in . Do not make any changes or miss anything out or add anything different at this stage. Save the document Save the document as demo.tex Run <LaTeX/> or <productname>pdf<LaTeX/></productname> Click on the or pdf toolbar icon or the File menu item; or type latex demo or pdflatex demo in a command window. Preview the typesetting Click on the DVI or PDFview toolbar icon or the View menu item; or type your previewer command in a terminal shell. (Note that there may be a pause the first time you use your viewer, while font files are created. previewers use their own font files specially created from the font outlines (TrueType, OpenType, PostScript, &metafont;, etc). The first time you use a font at a size not used before, there will be a second or two's pause while it gets created. The more you use , the less this happens. ) Print it Click on the Print toolbar icon within the viewer, or use the Print menu item, or type dvips -f demo | lpr (Unix/Linux). If you encounter any errors, it means you do need to study this chapter after all!
Editors editors All the text of your documents can be typed into your document from a standard keyboard using any decent plain-text editor. However, it is more convenient to use an editor with special features to make using easier. Some of the most popular are shell WinShell, nic Center, and WinEdt (Windows only); and and Emacs (all platforms). <LyX/>
The <LyX/> document editor
The document editor (all platforms) is a special case, as it uses the What You See Is What You Mean model of synchronous typographic editing as opposed to What You See Is What You Get, and many users prefer this interface (but see the reservations in ). makes a strong case for using synchronous typographical editing: it is possible to create even quite large and complex documents without seeing a backslash very often, although with math or complex macros there is probably no way to avoid having to do some manual insertion of code. The free availability on multiple platforms makes this a clear answer to the myth of having to edit like a programmer, and as it is an Open Source project, there is constant improvement, both to the facilities and to the interface. Probably the only real reservation is that it does not save native files by default. It uses its own internal format, and it can export for use in other editors, but the exported files are not designed for human legibility, only for processing. In a co-operative environment this would be a serious drawback, but for the individual user this interface is an excellent tool.
<TeX/>shell
The <TeX/>shell editor
This is one of the simplest of all the plaintext Windows editors, but it has most of the tools needed to begin with. Sectioning, lists, and graphics can be inserted from the menus, and there are buttons for running on the open document and for previewing the typeset document. The syntactic highlighting distinguishes between commands and your text, and it comes with options for spellchecking (you need to install ispell), and for adding math, Greek (math), and some symbol characters from a pickchart. The typeset display is done using your installed viewer (there is no provision for , although as it is configurable, that could probably be edited into the menus). Download the .tar.gz file from in the support/TeXshell/ directory and unwrap it into somewhere like C:\Program Files\TeXshell\. Yes, I know I said don't use directory names with spaces in them—and so you shouldn't, for your documents—but Windows programs are usually safe enough in them. There is a tsconfig program in the same directory on , which is designed to help with reconfiguring shell.
WinShell
The WinShell editor
This is another free Windows editor for beginners with . Despite its simplicity, it is capable of a considerable amount of document management and assistance with editing. As well as handling stand-alone files, you can create a Project for larger documents, which helps you keep track of additional files like separate chapters, illustrations, diagrams, indexes, &etc; You run direct from the toolbar icons or with F-key shortcuts. Both standard and pdf are supported, as well as creation and previewing of PostScript and output. There are additional toolbars for math characters, and there is a Table Wizard for handling tables. The syntax highlighting distinguishes between commands (in blue) and delimiters (in red), leaving your text in black. Download the WinShellnn.exe program (self-contained setup: the nn changes with the version) from in the systems/win32/winshell/ directory and double-click it to start the setup.
<TeX/>nicCenter
The <TeX/>nicCenter editor
nicCenter is a powerful Windows editor suitable both for the beginner and the more advanced user. Its Project environment keeps track of multiple files, and the processing function (the bit which actually runs , here called Build) tries to ensure that all the files you need for a large or complex document are in place before you start typesetting, to avoid errors like missing illustrations. It's a much more wordprocessor-like control interface, with configurable toolbars and button-controls for lists, math, tables, and previewing options. Download the TXCSetupxxx.exe program (self-contained setup: the xxx bit changes with the version) from in the systems/win32/TeXnicCenter/ directory and double-click it to start the setup.
WinEdt
The <productname>WinEdt</productname> editor
WinEdt is a highly configurable plain-text editor for Windows. It comes with a host of special functions and shortcuts for and , based on the Mik distribution. It is supplied on the Collection 2004 DVD and the prot CD. You can also download it from —in either case there's a 1-month free trial, then it reminds you to buy it. WinEdt uses a built-in toolbar of configurable buttons, preset for use with , and it provides syntactic coloring of commands. Both the positioning and effect of the buttons can be changed, using an editable file of icons and a configuration panel. This flexibility lets you bind a program and arguments (equivalent to a typed command) to a particular icon. There are default buttons on the toolbar for one-click typesetting, previewing, and PostScript or generation from documents, and it manages multi-file document projects like most of the other editors. Winedt is also used by many people for normal plaintext file-editing tasks, in preference to more limited programs like Notepad. If you're using the fp which came with the 2003 Collection, some editing of the menus is required (explained in the local installation document) because the default setup is for Mik/prot.
GNU Emacs
Emacs editing <LaTeX/>
Emacs is a product of the Project. GNU's Not Unix is a project to make a computing environment completely free of restrictions. Versions are available for all makes and models of computer, and it has a -mode which provides syntactic colouring (fontification in Emacs-speak) and mouseclick processing from a menu or toolbar. Emacs is a very large and powerful editor, with modes (plug-ins) to handle almost everything you do on a computer. Many users run Emacs once on logging in, and never leave it for the rest of the day—or month. As well as edit, you can use it to read your mail, browse the Web, read Usenet news, do wordprocessing and spreadsheets, compile programs, help you write in any computer language—including and —and it provides a few games as well. Emacs knows about and how to process it, so it comes with a menu full of operations to click on. If you are editing complex documents with mathematics, there is a mode (AUC) which has even more functionality. support is well-developed, and there is a hierarchy of newsgroups for Emacs support. Because Emacs runs on Microsoft Windows, Macs, Linux, and most other platforms, many users who have multiple machines (and those who have multiple users to support) prefer it to other editors because it provides the same environment regardless of which platform they are using. It's sometimes criticised for a steep learning curve, but in fact it's no worse in this respect than any other editor, given the power that it provides, and it is significantly better than most which lack many of the authorial tools available in Emacs.
Mac editors Mac users will be disappointed that I haven't included any of the Mac interfaces here. It's simple: I don't have a Mac right now to try them out on. I hope to remedy this for a future edition.
<LaTeX/> commands commands all begin with a backslash (\) Do not confuse the backslash with the forward slash (/). They are two different characters. The forward slash is used on the Web and on Unix systems to separate directory names and filenames. The backslash is used in Microsoft Windows (only) for the same purpose, and in to begin a command. and are usually made up of lowercase letters only, for example: \tableofcontents The tableofcontents command is an instruction to to insert the Table of Contents at this point. You would usually use this in a book or report (or perhaps a very long article) somewhere close to the beginning. You don't have to do anything else. Provided that you have used the sectioning commands described in , all the formatting and numbering for the Table of Contents is completely automated. Simple commands Simple one-word commands like tableofcontents must be separated from any following text with white-space. This means a normal space, or a newline [linebreak] or a TAB character. For example either of these two forms will work: \tableofcontents Thanks to Aunt Mabel for all her help with this book. \tableofcontents Thanks to Aunt Mabel for all her help with this book. If you forget the white-space, as in the following example, will try to read it as a command called \tableofcontentsThanks. There's no such command, of course, so will complain at you by displaying an error message (see ). \tableofcontentsThanks to Aunt Mabel for all her help with this book. swallows any white-space which follows a command ending in a letter. It does this automatically, so you don't get unwanted extra space in your typeset output, but it does mean that any simple command which ends in a letter and has no arguments (see below) must be followed by white-space before normal text starts again, simply to keep it separate from the text. Commands with arguments Many commands are followed by one or more arguments, a term from the field of Computer Science, meaning information to be acted upon. Here are two examples: \chapter{Poetic Form} \label{pform} Such arguments always go in {curly braces} like those braces curly braces shown above. Be careful not to confuse the curly braces on your keyboard with round parentheses ( ), square brackets [ ], or angle brackets  >. They are all different and they do different things. With commands that take arguments you do not need to use extra white-space after the command, because there is an argument following it which will keep it separate from any normal text with follows after that. The following is therefore perfectly correct (although unusual because it's harder to edit: normally you'd leave a blank line between the chapter title or label and the start of the first paragraph). \chapter{Poetic Form}\label{pform}The shape of poetry when written or printed distinguishes it from prose. White-space in <LaTeX/> white-space In documents, all multiple spaces, newlines (linebreaks), and TAB characters are treated as if they were a single space or newline during typesetting. does its own spacing and alignment using the instructions you give it, so you have extremely precise control. You are therefore free to use extra white-space in your editor for optical ease and convenience when editing. The following is therefore exactly equivalent to the example in the preceding section: \chapter {Poetic Form}\label {pform} The shape of poetry when written or printed distinguishes it from prose. That is, it will get typeset exactly the same. In general, just leave a blank line between paragraphs and a single space between words and sentences. will take care of the formatting. Special characters special characters There are ten keyboard characters which have special meaning to , and cannot be used on their own except for the following purposes: Key Meaning If you need?> the actual character?> itself, type: Character \ The command character textbackslash \ $ Math typesetting delimiter $ $ % The comment character % % Math superscript character &ers; Tabular column separator &ers; &ers; &uline; Math subscript character &uline; \texttt{\_} ˜ Non-breaking space ˜ ˜ &hash; Macro parameter symbol &hash; &hash; { Argument start delimiter { $\{$ } Argument end delimiter } $\}$ These characters were deliberately chosen, either because they are rare in normal text, or (in the case of $, &hash;, &ers;, and %) they already had an established special meaning on computers as metacharacters (characters standing as symbols for something else) by the time was written, and it would have been misleading to choose others. Using the special characters We have already seen () how to use the backslash to start a command, and curly braces to delimit an argument. The remaining special characters are: $ Because of the special mathematical meaning uses for the dollar-sign on its own, if you want to print $35.99 you type \$35.99 % The comment character makes ignore the remainder of the line in your document, so you can see it in your editor, but it will never get typeset. For example Today's price per kilo is £22.70 % get Mike to update this If you want to print 45% you need to type 45\% The caret sign lets you type \(E=mc^2\) to get E=mc 2 . If you need the circumflex accent on a letter like ê, just type the letter or use the symbolic notation \^e. &ers; The ampersand is used in tables to separate columns (see ). If you want to print AT&ers;T you need to type AT\&T. &uline; The underscore lets you type \(r_2\) for r 2 . If you want to underline text (extremely rare in typesetting) see . ˜ The tilde prints as a space, but prevents a linebreak ever occurring at that point. It's often used between a person's initials and their surname, eg Prof D.E.~Knuth &hash; If you want a hash mark (the octothorpe or American number or pound [weight] sign) you type \#. For a pound (sterling)£ sign £, now nearly obsolete except in the UK and some of its former dependencies, use your £ key or type textsterling. While we're on the subject of money, an unusual but interesting serif-font Euro sign is got with the texteuro command from the textcomp package. The standard sans-serif &EUR; needs the marvosym package and is done with the EUR command. The European Commission has specified that everyone use the sans-serif design, even in serif text, but this is amazingly ugly and most designers rightly ignore it. Quotation marks quotation marks Do not use the unidirectional typewriter keyboard " key for quotation marks. Correct typographic quotes are got with the ` key and the ' key, doubled if you want double quotes: He said, ``I'm just going out.'' He said, “I'm just going out.” This ensures you get real left-hand and right-hand (opening and closing) quotes (usually shaped like tiny 66 and 99 or as symmetrically-balanced strokes). If you are using Emacs as your editor, the " key is specially programmed in -mode to think for itself and produce correct `` and '' characters (so this is one occasion when you can use the " key). If you are reading this in a browser, or if you have reprocessed the file using different fonts, it may not show you real quotes (some old browser fonts are defective) and the thinspace below may be too wide. Download the typeset () version of this document to see the real effect. When typing one quotation inside another, there is a special command thinspace which provides just enough separation between double and single quotes (a normal space is too much and could allow an unwanted linebreak): He said, `Her answer was ``never''\thinspace'. He said, ‘Her answer was “never” ’. Accents accents For accented letters in western European languages ISO 8859-1 (Latin–1, Western European) to 8859-15 (includes the Euro). or other Latin-alphabet character sets just use the accented keys on your keyboard—if you have the right ones. You must also tell what character repertoire (input encoding) you are using. You specify this by using the inputenc packageWe haven't covered the use of packages yet. Don't worry, see if you're curious. in your preamble with the relevant option. For example, to tell you will be typing ISO Latin–1 accented characters, use: \usepackage[latin1]{inputenc} If you have a real Unicode editor, which lets you insert any letter or symbol from any language on the planet (for example, mixed European, Asian, and other languages), use utf8 instead of latin1. The encoding definitions that are available on your system are in /texmf/tex/latex/base (all files ending in .def). If you don't have accented letters This is for users whose keyboards do not have native accent characters on them. See your Operating System manual for full details. Here are two common examples: Under Linux systems the letter é is usually got with AltGr ; e. Refer to the xkeycaps utility for a table of key codes and combinations (get it from ). Under Microsoft Windows the letter é is got with Ctrl ' e or by holding down the Alt key and typing 0130 on the numeric keypad (not the top row of shifted numerals). Refer to the charmap utility for a table of key codes and combinations (find it in the C:\Windows folder). If you don't have accented letter keys on your keyboard, you'll need to use your operating system's standard keyboard Ctrl or Alt key combinations to generate the characters (see ). If you cannot generate accented characters from your keyboard at all, or if you need additional accents or symbols which are not in any of the keyboard tables, you can use the symbolic notation in . In fact, this can be used to put any accent over any letter: if you particularly want a >ilde; you can have one with the command ˜g (and Welsh users can get ŵ with w). If you use this symbolic method only, you do not need to use the inputenc package. Before the days of keyboards and screens with their own real accented characters, the symbolic notation was the only way to get accents, so you may come across a lot of older documents (and users!) using this method all the time: it does have the advantage in portability that the file remains plain , which will work on all machines everywhere, regardless of their internal encoding, and even with very old installations. Remember not everyone is lucky enough to be able to install new software: many users on corporate and academic networks still have to use old versions of because their system administrators are too busy to install new ones. Built-in <LaTeX/> accents Accent Example Characters to type Acute (fada) é \'e Grave è \`e Circumflex ê \^e Umlaut or diæresis ë \"e Tilde ñ \~n Macron ō \=o Bar-under \b o Dot-over (séı&mdot;ıú) &mdot;&mdot; \.m Dot-under \d s Breve ŭ \u u Háček (caron) &ucaron; \v u Long umlaut &olong; \H o Tie-after &ootie;&ootie; \t oo Cedilla ç \c c O-E ligature œ, Œ \oe, \OE A-E ligature æ, Æ \ae, \AE A-ring å, Å \aa, \AA O-slash ø, Ø \o, \O Soft-l ł, Ł \l, \L Ess-zet (scharfes-S) ß \ss
Irish and Turkish dotless-ı is done with the special command i, so an í-fada (which is normally typed with í) requires \'\i if you need to type it in the long format, followed by a backslash-space or dummy pair of curly braces if it comes at the end of a word and there is no punctuation, because of the rule that control sequences which end in a letter (see ) always absorb any following space. So what you might see as Rí Tea&mdot;raċ has to be R\'\i\ Tea\.mra\.c when typed in full (there are not usually any keyboard keys for the dotless-ı or the lenited characters). A similar rule applies to dotless-&jnodot; and to uppercase \'I.
Dimensions, hyphenation, justification, and breaking dimensions hyphenation justification H&ers;J hyphenation, justification 's internal measurement system is extraordinarily accurate. The underlying engine conducts all its business in units smaller than the wavelength of visible light, so if you ask for 15mm space, that's what you'll get—within the limitations of your screen or printer, of course. Most screens cannot show dimensions of less than 1 96 &inch; without resorting to magnification or scaling; and on printers, even at 600dpi, fine oblique lines or curves can still sometimes be seen to stagger the dots. At the same time, many dimensions in 's preprogrammed formatting are specially set up to be flexible: so much space, plus or minus certain limits to allow the system to make its own adjustments to accommodate variations like overlong lines, unevenly-sized images, and non-uniform spacing around headings. uses a very sophisticated justification algorithm to achieve a smooth, even texture to normal paragraph text. The programming for this has been borrowed by a large number of other DTP systems, and users of these are often quite unaware that they are in fact using a significant part of in their work. Occasionally, however, you will need to hand-correct an unusual word-break or line-break, and there are facilities for doing this on individual occasions as well as throughout a document. Specifying size units dimension units Most people in printing and publishing habitually use points and picas and ems. Some designers use cm and mm. Many English-language speakers still use inches. You can specify lengths in in any of these units, plus some others (see ). pt (points) points pc (picas) picas bp (big points) sp (scaled points) dd (Didot points) cc (Ciceros) em (relative measure) ex (relative measure) mm (millimeters) cm (centimeters) in (inches) Units in <LaTeX/> Unit Size Printers' fixed measures pt Anglo-American standard points (72.27 to the inch) pc pica ems (12pt) bp Adobe big points (72 to the inch) sp  scaled points (65,536 to the pt) dd Didot (European standard) points (67.54 to the inch) cc Ciceros (European pica ems, 12dd) Printers' relative measures em ems of the current point size (historically the width of a letter M but see below) ex x-height of the current font (height of letter x) Other measures cm centimeters (2.54 to the inch) mm millimeters (25.4 to the inch) in inches
The em can cause beginners some puzzlement because it's based on the point size of the type, which is itself misleading. The point size refers to the depth of the metal body on which foundry type was cast in the days of metal typesetting, not the printed height of the letters themselves. Thus the letter-size of 10pt type in one face can be radically different from 10pt type in another (look at , where all the examples are 10pt). An em is the height of the type-body in a specific size, so 1em of 10pt type is 10pt and 1em of 24pt type is 24pt. Another name for a 1em space is a quad, and has a command quad for leaving exactly that much horizontal space. A special name is given to the 12pt em, a pica em, as it has become a fixed measure in its own right. If you are working with other DTP users, watch out for those who think that Adobe points (bp) are the only ones. The difference is only .27pt per inch, but in 10&inch; of text (a full page of A4) that's 2.7pt, which is nearly 1mm, enough to be clearly visible if you're trying to align one sample with another.
Hyphenation hyphenates automatically according to the language you use (see ). To specify different breakpoints for an individual word, you can insert soft-hyphens hyphenssoft (discretionary hyphens, done with -) wherever you need them, for example: When in Mexico, we visited Popoca\-tépetl by helicopter. To specify hyphenation points for all occurrences of a word, use the hyphenation command in your preamble (see ) with one or more words in its argument, separated by spaces. This will even let you break helico-?>pter correctly. In this command you use normal hyphens, not soft-hyphens. hyphens discretionary \hyphenation{helico-pter Popoca-tépetl im-mer-sion} If you have frequent hyphenation problems with long, unusual, or technical words, ask an expert about changing the value of spaceskip, which controls the flexibility of the space between words. This is not something you would normally want to do, as it can change the appearance of your document quite significantly. If you are using a lot of unbreakable text (see next section and also ) it may also cause justification problems. One possible solution to this is shown in . Unbreakable text To force to treat a word as unbreakable, use the mbox command: \mbox{pneumonoultramicroscopicsilicovolcanoconiosis}. ?>This may have undesirable results, however, if you change margins or the width of the text: pneumonoultramicroscopicsilicovolcanoconiosis To tie two words together with an unbreakable space hard space white-space hard (hard space), use a tilde (~) instead of the space (see ). This will print as a normal space but will never break the line at that point. You should make this standard typing practice for things like people's initials followed by their surname, as in Prof. D. E. Knuth: Prof.\ D.~E.~Knuth. Note that a full point after a lowercase letter is treated as the end of a sentence, and creates more space before the next word. Here, after Prof., it's not the end of a sentence, and the backslash-space forces to insert just an ordinary word-space because it's OK to break the line after Prof., whereas it would look wrong to have initials separated with Prof. D.?>E. Knuth broken over a line-end. Dashes For a long dash—what printers call an em rule like this—use three hyphens typed together, like~--- this, and bind them to the preceding word with a tilde to avoid the line being broken before the dash. It's also common to see the dash printed without spaces&mrule;like that: the difference is purely æsthetic. Never use a single hyphen for this purpose. Between digits like page ranges (35–47), it is normal to use the short dash (what printers call an en-rule) which you get by typing two hyphens together, as in 35--47. If you want a minus sign, use math mode (). Justification The default mode for typesetting is justified (two parallel margins, with word-spacing adjusted automatically for the best optical fit). In justifying, will never add space between letters, only between words. There is a special package called so (space-out) if you need special effects like letter-spacing, but these are best left to the expert. There are two commands raggedright and raggedleft which set ragged-right (ranged left) and ragged-left (ranged right). Use them inside a group (see ) to confine their action to a part of your text. These modes also exist as environments (see ) called raggedright and raggedleft which are more convenient when applying this formatting to a whole paragraph or more, like this one. \begin{raggedleft} These modes also exist as environments called raggedright and raggedleft which is more convenient when applying this formatting to a whole paragraph or more, like this one. \end{raggedleft} Ragged setting turns off hyphenation. There is a package ragged2e which retains hyphenation in ragged setting, useful when you have a lot of long words. Languages can typeset in the native manner for several dozen languages. This affects hyphenation, word-spacing, indentation, and the names of the parts of documents used as headings (⪚ Table of Contents). Most distributions of come with US English and one or more other languages installed by default, but it is easy to add the babel package and specify any of the supported languages or variants, for example: \usepackage[frenchb]{babel} ... \selectlanguage{frenchb} Changing the language with babel automatically changes the names of the structural units and identifiers like Abstract, Index, &etc; to their translated version. For example, using French as above, chapters will start with Chapitre. Note that the babel package also sets the hyphenation patterns provided your version of has them precompiled (see the start of your log files for a list). For other languages you need to set the hyphenation separately (outside the scope of this book).
Mathematics mathematics As explained in , was originally written to automate the typesetting of books containing mathematics. The careful reader will already have noticed that mathematics is handled differently from normal text, which is why it has to be typeset specially. This document does not cover mathematical typesetting, which is explained in detail in many other books and Web pages, so all we will cover here is the existence of the math mode commands, and some characters which have special meaning, so they don't trip you up elsewhere. In addition to the 10 special characters listed in , there are three more characters which only have any meaning inside mathematics mode: math characters Key Meaning &vbar; Vertical bar Less-than > Greater-than If you type any of these in normal text (ie outside math mode), you will get very weird things happening and lots of error messages. If you need to print these characters, you must type them using math mode, or use their symbolic names from the textcomp package (textbrokenbar, textlangle, and textrangle). The hyphen also has an extra meaning in math mode: it typesets as a minus sign, so if you want to write about negative numbers you need to type the number in math mode so the minus sign and the spacing come out right. To use math mode within a paragraph, enclose your math expression in ( and ) commands. You can get the much-quoted equation E=mc 2 by typing \(E=mc^2\), and to get a temperature like 30 ° you need to type \(-30\)°. Bear in mind that the degree symbol is a non- character, so you must specify what input encoding you are using if you want to type it: see the example of the inputenc package in . If you don't want to use non- characters (or if you are using a system which cannot generate them), you can use the command textdegree to get the degree sign. To typeset a math expression as displayed math (centered between paragraphs), enclose it in the commands [ and ]. You will also see dollar signs used for math mode. This is quite common but deprecated: it's what plain used in the days before , and the habit got ingrained in many mathematicians. It still works as a convenient shorthand like $x=y$, as do double-dollars for display-mode math like $$E=mc^2$$, but they are only mentioned here to warn readers seeing them in other authors' work that () and [] are the proper commands. \[\bar n^*_j(s)=\frac{\left\{s\sum_{i=1}^k n_i(0)p^*{i,k+1}(s)+M^*(s)\right\}\sum_{i=1}^k p_{0i}p^*{ij}(s)}{1-s\sum_{i=1}^kp_{0i}p^*_{i, k+1}(s)}+\sum_{i=1}^kn_i(0)p^*_{ij}(s)[j= 1,2,\dots,k].\] Displayed equations can be auto-numbered with the equation environment instead of the [ and ] commands.
Basic document structures sections 's approach to formatting is to aim for consistency. This means that as long as you identify each element of your document correctly, it will be typeset in the same way as all the other elements like it, so that you achieve a consistent finish with minimum effort. Consistency helps make documents easier to read and understand. Elements are the component parts of a document, all the pieces which make up the whole. Almost everyone who reads books, newspapers, magazines, reports, articles, and other classes of documents will be familiar with the popular structure of chapters, sections, subsections, subsubsections, paragraphs, lists, tables, figures, and so on, even if they don't consciously think about it. Consistency is also what publishers look for. They have a house style, and often a reputation to keep, so they rightly insist that if you do something a certain way once, you should do it the same way each time. To help achieve this consistency, every document starts by declaring what document class it belongs to. The Document Class Declaration document class To tell what class of document you are going to create, you type a special first line into your file which identifies it. Readers familiar with , , or will recognize the concept as similar to the Document Type Declaration. To start a report, for example, you would type the documentclass command like this as your first line: \documentclass{report} There are four built-in classes provided, and many others that you can download (some may already be installed for you): report for business, technical, legal, academic, or scientific reports; article for white papers, magazine or journal articles, reviews, conference papers, or research notes; book for books and theses; letter for letters. The built-in letter class is rather idiosyncratic: there are much better ones you can download, such as the memoir and komascript packages. The article class in particular can be used (some would say abused) for almost any short piece of typesetting by simply omitting the titling and layout (see below). The built-in classes are intended as starting-points, especially for drafts and for compatibility when exchanging documents with other users, as they come with every copy of and are therefore guaranteed to format identically everywhere. They are not intended as final-format publication-quality layouts. For most other purposes, especially for publication, you use add-in packages to extend these classes to do what you need: The memoir and komascript packages contain more sophisticated replacements for all the built-in classes; Many academic and scientific publishers provide their own special class files for articles and books (often on their Web sites for download); Conference organisers may also provide class files for authors to write papers for presentation; Many universities provide their own thesis document class files in order to ensure exact fulfillment of their formatting requirements; Businesses and other organizations can provide their users with corporate classes on a central server and configure installations to look there first for packages, fonts, etc. Books and journals are not usually printed on office-size paper. Although 's layouts are designed to fit on standard A4 or Letter stationery for draft purposes, it makes them look odd: the margins are too wide, or the positioning is unusual, or the font size is too small, because the finished job will normally be trimmed to a different size entirely—try trimming the margins of the version of this book to 185mm by 235mm (the same as series) and you'll be amazed at how it changes the appearance! Document class options paper sizes The default layouts are designed to fit as drafts on US Letter size paper. Letter size is 8½&inch;×11&inch;, which is the trimmed size of the old Demi Quarto, still in use in North America. The other common US office size is Legal, which is 8½&inch;×14&inch;, a bastard cutting close to the old Foolscap (8¼&inch;×13¼&inch;). ISO standard A, B, and C paper sizes are still virtually unknown in many parts of North America. To create documents with the correct proportions for standard A4 paper, you need to specify the paper size in an optional argument in square brackets before the document class name, ⪚ \documentclass[a4paper]{report} The two most common options are and . However, many European distributions of now come preset for A4, not Letter, and this is also true of all distributions of pdf. The other default settings are for: 10pt type (all document classes) two-sided printing (books and reports) or one-sided (articles and letters) separate title page (books and reports only) . These can be modified with the following document class options which you can add in the same set of square brackets, separated by commas: fonts sizes to specify 11pt type (headings, footnotes, &etc; get scaled up or down in proportion); to specify 12pt type (again, headings scale); to format one-sided printing for books and reports; to format articles for two-sided printing; to force articles to have a separate title page; makes indicate hyphenation and justification problems with a small square in the right-hand margin of the problem line so they can be located quickly by a human. If you were using pdf for a report to be in 12pt type on Letter paper, but printed one-sided in draft mode, you would use: \documentclass[12pt,letterpaper,oneside,draft]{report} There are extra preset options for other type sizes which can be downloaded separately, but 10pt, 11pt, and 12pt between them cover probably 99% of all document typesetting. In addition there are the hundreds of add-in packages which can automate other layout and formatting variants without you having to program anything by hand or even change your text. Create a new document Use your editor to create a new document. Type in a Document Class Declaration as shown above. Add a font size option if you wish. In North America, omit the option or change it to . Save the file (make up a name) ensuring the name ends with .tex The document environment After the Document Class Declaration, the text of your document is enclosed between two commands which identify the beginning and end of the actual document: \documentclass[11pt,a4paper,oneside]{report} \begin{document} ... \end{document} (You would put your text where the dots are.) The reason for marking off the beginning of your text is that allows you to insert extra setup specifications before it (where the blank line is in the example above: we'll be using this soon). The reason for marking off the end of your text is to provide a place for to be programmed to do extra stuff automatically at the end of the document, like making an index. A useful side-effect of marking the end of the document text is that you can store comments or temporary text underneath the \end{document} in the knowledge that will never try to typeset them. ... \end{document} Don't forget to get the extra chapter from Jim! This begin …end pair of commands is an example of a common structure called an environment. Environments enclose text which is to be handled in a particular way. All environments start with \begin{...} and end with \end{...} (putting the name of the environment in the curly braces). Adding the document environment Add the document environment to your file. Leave a blank line between the Document Class Declaration and the \begin{document} (you'll see why later). Save the file. Titling titles The first thing you put in the document environment is almost always the document title, the author's name, and the date (except in letters, which have a special set of commands for addressing which we'll look at later). The title, author, and date are all examples of or (information about information). \documentclass[11pt,a4paper,oneside]{report} \begin{document} \title{Practical Typesetting} \author{Peter Flynn\\Silmaril Consultants} \date{December 2004} \maketitle \end{document} The title, author, and date commands are self-explanatory. You put the title, author name, and date in curly braces after the relevant command. The title and author are usually compulsory; if you omit the date command, uses today's date by default. You always finish the metadata with the maketitle command, which tells that it's complete and it can typeset the titling information at this point. If you omit maketitle, the titling will never be typeset. This command is reprogrammable so you can alter the appearance of titles (like I did for the printed version of this document). The double backslash (\\) is the command for forced linebreak. normally decides by itself where to break lines, and it's usually right, but sometimes you need to cut a line short, like here, and start a new one. I could have left it out and just used a comma, so my name and my company would all appear on the one line, but I just decided that I wanted my company name on a separate line. In some publishers' document classes, they provide a special affiliation command to put your company or institution name in instead. When this file is typeset, you get something like this (I've cheated and done it in colour for fun—yours will be in black and white for the moment): Adding the metadata Add the title, author, date, and maketitle commands to your file. Use your own name, make up a title, and give a date. The order of the first three commands is not important, but the maketitle command must come last. The document isn't really ready for printing like this, but if you're really impatient, look at to see how to typeset and display it. Abstracts and summaries abstracts summaries In reports and articles it is normal for the author to provide an Summary or Abstract, in which you describe briefly what you have written about and explain its importance. Abstracts in articles are usually only a few paragraphs long. Summaries in reports can run to several pages, depending on the length and complexity of the report and the readership it's aimed at. In both cases (reports and articles) the Abstract or Summary is optional (that is, doesn't force you to have one), but it's rare to omit it because readers want and expect it. In practice, of course, you go back and type the Abstract or Summary after having written the rest of the document, but for the sake of the example we'll jump the gun and type it now. \documentclass[11pt,a4paper,oneside]{report} \usepackage[latin1]{inputenc} \renewcommand{\abstractname}{Summary} \begin{document} \title{Practical Typesetting} \author{Peter Flynn\\Silmaril Consultants} \date{December 2004} \maketitle \begin{abstract} This document presents the basic concepts of typesetting in a form usable by non-specialists. It is aimed at those who find themselves (willingly or unwillingly) asked to undertake work previously sent out to a professional printer, and who are concerned that the quality of work (and thus their corporate æsthetic) does not suffer unduly. \end{abstract} \end{document} After the maketitle you use the abstract environment, in which you simply type your Abstract or Summary, leaving a blank line between paragraphs if there's more than one (see for this convention). In business and technical documents, the Abstract is often called a Management Summary, or Executive Summary, or Business Preview, or some similar phrase. lets you change the name associated with the abstract environment to any kind of title you want, using the renewcommand command to give the command abstractname a new value: \renewcommand{\abstractname}{Executive Summary} Using an Abstract or Summary Add the renewcommand as shown above to your Preamble. The Preamble is at the start of the document, in that gap after the documentclass line but before the \begin{document} (remember I said we'd see what we left it blank for: see ). Add an abstract environment after the maketitle and type in a paragraph or two of text. Save the file (no, I'm not paranoid, just careful). Notice how the name of the command you are renewing (here, abstractname) goes in the first set of curly braces, and the new value you want it to have goes in the second set of curly braces (this is an example of a command with two arguments). The environment you use is still called abstract (that is, you still type \begin{abstract}\end{abstract}). What the abstractname does is change the name that gets displayed and printed, not the name of the environment you store the text in. If you look carefully at the example document, you'll see I sneakily added an extra command to the Preamble. We'll see later what this means (Brownie points for guessing it, though, if you read ). The Preamble Modifications which you want to affect a whole document go at the start of your file, immediately after the documentclass line and before the \begin{document} line: \documentclass[11pt,a4paper,oneside]{report} \renewcommand{\abstractname}{Sneak Preview} \begin{document} ... \end{document} This position, between the Document Class Declaration and the beginning of the document environment, is called the preamble, and it is used for small or temporary modifications to the style and behaviour of the document. Major or permanent modifications should go in a .sty file and be invoked with a usepackage command. Sections sections In the body of your document, provides seven levels of division or sectioning for you to use in structuring your text. They are all optional: it is perfectly possible to write a document consisting solely of paragraphs of unstructured text. But even novels are normally divided into chapters, although short stories are often made up solely of paragraphs. Chapters are only available in the book and report document classes, because they don't have any meaning in articles and letters. Parts are also undefined in letters. It is arguable that chapters also have no place in reports, either, as these are conventionally divided into sections as the top-level division. , however, assumes your reports have chapters, but this is only the default, and can be changed very simply (see ). Depth Division Command Notes 1 Part part Not in letters 0 Chapter chapter Books and reports 1 Section section Not in letters 2 Subsection subsection Not in letters 3 Subsubsection subsubsection Not in letters 4 Titled paragraph paragraph Not in letters 5 Titled subparagraph subparagraph Not in letters In each case the title of the part, chapter, section, &etc; goes in curly braces after the command. automatically calculates the correct numbering and prints the title in bold. You can turn section numbering off at a specific depth: details in . \section{New recruitment policies} ... \subsection{Effect on staff turnover} ... \chapter{Business plan 2005--2007} There are packages Details of how to use packages are in . to let you control the typeface, style, spacing, and appearance of section headings: it's much easier to use them than to try and reprogram the headings manually. Two of the most popular are the ssection and sectsty packages. Headings also get put automatically into the Table of Contents, if you specify one (it's optional). But if you make manual styling changes to your heading, for example a very long title, or some special line-breaks or unusual font-play, this would appear in the Table of Contents as well, which you almost certainly don't want. allows you to give an optional extra version of the heading text which only gets used in the Table of Contents and any running heads, if they are in effect . This optional alternative heading goes in [square brackets] before the curly braces: \section[Effect on staff turnover]{An analysis of the effect of the revised recruitment policies on staff turnover at divisional headquarters} Start your document text Add a chapter command after your Abstract or Summary, giving the title of your first chapter. If you're planning ahead, add a few more chapter commands for subsequent chapters. Leave a few blank lines between them to make it easier to add paragraphs of text later. By now I shouldn't need to tell you what to do after making significant changes to your document file. Section numbering section numbering All document divisions get numbered automatically. Parts get Roman numerals (Part I, Part II, &etc;); chapters and sections get decimal numbering like this document, and Appendixes (which are just a special case of chapters, and share the same structure) are lettered (A, B, C, &etc;). You can change the depth to which section numbering occurs, so you can turn it off selectively. In this document it is set to \arabic{secnumdepth}. If you only want parts, chapters, and sections numbered, not subsections or subsubsections &etc;, you can change the value of the secnumdepth counter using the the setcounter command, giving the depth value from : \setcounter{secnumdepth}{1} A related counter is tocdepth, which specifies what depth to take the Table of Contents to. It can be reset in exactly the same way as secnumdepth. The current setting for this document is \arabic{tocdepth}. \setcounter{tocdepth}{3} To get an unnumbered section heading which does not go into the Table of Contents, follow the command name with an asterisk before the opening curly brace: \subsection*{Shopping List} All the divisional commands from part* to subparagraph* have this starred version which can be used on special occasions for an unnumbered heading when the setting of secnumdepth would normally mean it would be numbered. Ordinary paragraphs After section headings comes your text. Just type it and leave a blank line between paragraphs. That's all needs. The blank line means start a new paragraph here: it does not (repeat: not) mean you get a blank line in the typeset output. Now read this paragraph again and again until that sinks in. The spacing between paragraphs is a separately definable quantity, a dimension or length called parskip. This is normally zero (no space between paragraphs, because that's how books are normally typeset), but you can easily set it to any size you want with the setlength command in the Preamble: \setlength{\parskip}{1cm} This will set the space between paragraphs to 1cm. See for details of the various size units can use. Leaving multiple blank lines between paragraphs in your source document achieves nothing: all extra blank lines get ignored by because the space between paragraphs is controlled only by the value of parskip. White-space in can also be made flexible (what calls rubber lengths). This means that values such as parskip can have a default dimension plus an amount of expansion minus an amount of contraction. This is useful on pages in complex documents where not every page may be an exact number of fixed-height lines long, so some give-and-take in vertical space is useful. You specify this in a setlength command like this: \setlength{\parskip}{1cm plus4mm minus3mm} Paragraph indentation can also be set with the setlength command, although you would always make it a fixed size, never a flexible one, otherwise you would have very ragged-looking paragraphs. \setlength{\parindent}{6mm} By default, the first paragraph after a heading follows the standard Anglo-American publishers' practice of no indentation. Subsequent paragraphs are indented by the value of parindent (default 18pt). Paragraph spacing and indentation are cultural settings. If you are typesetting in a language other than English, you should use the babel package, which alters many things, including the spacing and the naming of sections, to conform with the standards of different countries and languages. You can change this in the same way as any other length. In the printed copy of this document, the paragraph indentation is set to \the\parindent and the space between paragraphs is set to \the\parskip. These values do not apply in the Web () version because not all browsers are capable of that fine a level of control, and because users can apply their own stylesheets regardless of what this document proposes. Start typing! Type some paragraphs of text. Leave a blank line between each. Don't bother about line-wrapping or formatting— will take care of all that. If you're feeling adventurous, add a section command with the title of a section within your first chapter, and continue typing paragraphs of text below that. Add one or more setlength commands to your Preamble if you want to experiment with changing paragraph spacing and indentation. To turn off indentation completely, set it to zero (but you still have to provide units: it's still a measure!). \setlength{\parindent}{0in} If you do this, though, and leave parskip set to zero, your readers won't be able to tell easily where each paragraph begins! If you want to use the style of having no indentation with a space between paragraphs, use the parskip package, which does it for you (and makes adjustments to the spacing of lists and other structures which use paragraph spacing, so they don't get too far apart). Table of contents table of contents automated entries All auto-numbered headings get entered in the Table of Contents (ToC) automatically. You don't have to print a ToC, but if you want to, just add the command tableofcontents at the point where you want it printed (usually after the Abstract or Summary). Entries for the ToC are recorded each time you process your document, and reproduced the next time you process it, so you need to re-run one extra time to ensure that all ToC page-number references are correctly calculated. We've already seen in how to use the optional argument to the sectioning commands to add text to the ToC which is slightly different from the one printed in the body of the document. It is also possible to add extra lines to the ToC, to force extra or unnumbered section headings to be included. Inserting the table of contents Go back and add a tableofcontents command after the \end{abstract} command in your document. You guessed. The commands listoffigures and listoftables work in exactly the same way as tableofcontents to automatically list all your tables and figures. If you use them, they normally go after the tableofcontents command. The tableofcontents command normally shows only numbered section headings, and only down to the level defined by the tocdepth counter (see ), but you can add extra entries with the addcontentsline command. For example if you use an unnumbered section heading command to start a preliminary piece of text like a Foreword or Preface, you can write: table of contents adding manual entry \subsection*{Preface} \addcontentsline{toc}{subsection}{Preface} This will format an unnumbered ToC entry for Preface in the subsection style. You can use the same mechanism to add lines to the List of Figures or List of Tables by substituting lof or lot for toc. Typesetting, viewing and printing typesetting viewing printing We've now got far enough to typeset what you've entered. I'm assuming at this stage that you have typed some sample text in the format specified in the previous chapter, and you've saved it in a plain-text file with a filetype of .tex and a name of your own choosing. filenames Saving your file If you haven't already saved your file, do so now (some editors and interfaces let you typeset the document without saving it!). Pick a sensible filename in a sensible directory. Names should be short enough to display and search for, but descriptive enough to make sense. See for more details. Picking suitable filenames Never, ever use directories (folders) or file names which contain spaces. Although your operating system probably supports them, some don't, and they will only cause grief and tears with . Make filenames as short or as long as you wish, but strictly avoid spaces. Stick to upper- and lower-case letters without accents (A–Z and a–z), the digits 0–9, the hyphen (-), and the full point or period (.), (similar to the conventions for a Web ): it will let you refer to files over the Web more easily and make your files more portable. Typesetting Typesetting your document is usually done by clicking on a button in a toolbar or an entry in a menu. Which one you click on depends on what output you want—there are two formats available: The standard (default) program produces a device-independent file which can be used with any previewer or printer driver on any make or model of computer. There are dozens of these available: at least one of each (previewer and printer driver) should have been installed with your distribution of . The pdf program produces an Adobe Acrobat file which can be used with any suitable previewer, such as GSview, PDFview, Xpdf, the Opera browser, or Adobe's own Acrobat Reader. Depending on which one you choose, you may have to [re]configure your editor so that it runs the right program. They can all do all of them, but they don't always come pre-set with buttons or menus for every possible option, because they can't guess which one you want. Standard <LaTeX/> There are also two ways of running : from the toolbar or menu, or from the command line. Toolbars and menus are most common in graphical systems, and are the normal way to run . Command lines are used in non-graphical systems and in automated processes where is run unattended (so-called batch or scripted processing). Whichever way you run , it will process your file and display a log or record of what it's doing (see : it looks the same no matter what system you use). This is to let you see where (if!) there are any errors or problems. Running <LaTeX/> from the toolbar or menu Run on your file. According to which system you're using this will either be the toolbar icon or the File menu item. Your editor may suggest you save your file if you haven't already done so. Do it. If reports any errors—easily identifiable as lines in the log beginning with an exclamation mark (!)—don't panic! Turn to , identify what went wrong, and fix it in your input file. Then re-run . If there were no errors, your file is ready for displaying or printing. Running <LaTeX/> from a command window This is worth practising even if you normally use a , so that you understand what it does. See for an example. Running <LaTeX/> in a terminal or console window Under graphical Unix-based systems (Linux and Mac) you open a command (shell) window by clicking on the shell or screen icon in the control panel at the bottom of your screen. Under Microsoft Windows you open a command window by clicking on the StartProgramsMS-DOS or StartCommand Prompt menu item. When the command window appears, type cd documents latex mybook  Substitute the relevant directory and file name. Remember to press the Enter key at the end of each line.
Command-line usage
pdf<LaTeX/> If your editor is set up to generate files direct instead of files, then you can click the pdf toolbar icon or type the command pdflatex filename in a terminal (console) window. Emacs does not have a default menu configured for pdf but if you have already run standard on the file, you can type ther pdflatex command in the *TeX-Shell* pane.
Errors and warnings describes what it's typesetting while it does it, and if it encounters something it doesn't understand or can't do, it will display a message saying what's wrong. It may also display warnings for less serious conditions. Don't panic if you see error messages: it's very common for beginners to mistype or mis-spell commands, forget curly braces, type a forward slash instead of a backslash, or use a special character by mistake. Errors are easily spotted and easily corrected in your editor, and you can then run again to check you have fixed everything. Some of the most common errors are described in with an explanation of how to fix them. Error messages The format of an error message is always the same. Error messages begin with an exclamation mark at the start of the line, and give a description of the error, followed by another line starting with the number, which refers to the line-number in your document file which was processing when the error was spotted. Here's an example, showing that the user mistyped the tableofcontents command: ! Undefined control sequence. l.6 \tableofcotnetns When finds an error like this, it displays the error message and pauses. You must type one of the following letters to continue: Key Meaning x Stop immediately and exit the program. q Carry on quietly as best you can and don't bother me with any more error messages. e Stop the program but re-position the text in my editor at the point where you found the error. This only works if you're using an editor which can communicate with. h Try to give me more help. i (followed by a correction) means input the correction in place of the error and carry on. This is only a temporary fix to get the file processed. You still have to make that correction in the editor. Some systems (Emacs is one example) run with a non-stop switch turned on, so it will always process through to the end of the file, regardless of errors, or until a limit is reached. Warnings Warnings don't begin with an exclamation mark: they are just comments by about things you might want to look into, such as overlong or underrun lines (often caused by unusual hyphenations, for example), pages running short or long, and other typographical niceties (most of which you can ignore until later). Unlike other systems, which try to hide unevennesses in the text—usually unsuccessfully—by interfering with the letter-spacing, takes the view that the author or editor should be able to contribute. While it is certainly possible to set 's parameters so that the spacing is sufficiently sloppy that you will almost never get a warning about badly-fitting lines or pages, you will almost certainly just be delaying matters until you start to get complaints from your readers or publishers. Examples Only a few common error messages are given here: those most likely to be encountered by beginners. If you find another error message not shown here, and it's not clear what you should do, ask for help. Most error messages are self-explanatory, but be aware that the place where spots and reports an error may be later in the file than the place where it actually occurred. For example if you forget to close a curly brace which encloses, say, italics, won't report this until something else occurs which can't happen until the curly brace is encountered (eg the end of the document!) Some errors can only be righted by humans who can read and understand what the document is supposed to mean or look like. Newcomers should remember to check the list of special characters in : a very large number of errors when you are learning are due to accidentally typing a special character when you didn't mean to. This disappears after a few days as you get used to them. Too many }'s Too many }'s Error messages Too many }'s ! Too many }'s. l.6 \date December 2004} The reason thinks there are too many }'s here is that the opening curly brace is missing after the date control sequence and before the word December, so the closing curly brace is seen as one too many (which it is!). In fact, there are other things which can follow the date command apart from a date in curly braces, so cannot possibly guess that you've missed out the opening curly brace—until it finds a closing one! Undefined control sequence Undefined control sequence Error messages Undefined control sequence ! Undefined control sequence. l.6 \dtae {December 2004} In this example, is complaining that it has no such command (control sequence) as \dtae. Obviously it's been mistyped, but only a human can detect that fact: all knows is that \dtae is not a command it knows about—it's undefined. Mistypings are the commonest source of error. If your editor has drop-down menus to insert common commands and environments, use them! Runaway argument Runaway argument Error messages Runaway argument Runaway argument? {December 2004 \maketitle ! Paragraph ended before \date was complete. ]]> \par l.8 In this error, the closing curly brace has been omitted from the date. It's the opposite of the error in , and it results in maketitle trying to format the title page while is still expecting more text for the date! As maketitle creates new paragraphs on the title page, this is detected and complains that the previous paragraph has ended but date is not yet finished. Underfull hbox Underfull hbox Error messages Underfull hbox Underfull \hbox (badness 1394) in paragraph at lines 28--30 [][]\LY1/brm/b/n/10 Bull, RJ: \LY1/brm/m/n/10 Ac-count-ing in Busi- [94] This is a warning that cannot stretch the line wide enough to fit, without making the spacing bigger than its currently permitted maximum. The (0–10,000) indicates how severe this is (here you can probably ignore a badness of 1394). It says what lines of your file it was typesetting when it found this, and the number in square brackets is the number of the page onto which the offending line was printed. The codes separated by slashes are the typeface and font style and size used in the line. Ignore them for the moment: details are in if you're curious. Overfull hbox Overfull hbox Error messages Overfull hbox [101] Overfull \hbox (9.11617pt too wide) in paragraph at lines 860--861 []\LY1/brm/m/n/10 Windows, \LY1/brm/m/it/10 see \LY1/brm/m/n/10 X Win- And the opposite warning: this line is too long by a shade over 9pt. The chosen hyphenation point which minimises the error is shown at the end of the line (Win-). Line numbers and page numbers are given as before. In this case, 9pt is too much to ignore (over 3mm or more than 1 8 &inch;), and a manual correction needs making (such as a change to the hyphenation), or the flexibility settings need changing (outside the scope of this book). Missing package File not found Error messages File not found to proceed, or enter new name. (Default extension: sty) Enter file name: ]]> When you use the usepackage command to request to use a certain package, it will look for a file with the specified name and the filetype .sty. In this case the user has mistyped the name of the paralist package, so it's easy to fix. However, if you get the name right, but the package is not installed on your machine, you will need to download and install it before continuing (see ). Screen preview preview Once the file has been processed without errors (or even if there are still errors, but you want to see what it's doing with them), standard will have created a file with the same name as your document but the filetype .dvi. If you're using pdf, a file will have been created, and you can skip to . Previewing DVI output To see the typeset output, click on the dvi Preview toolbar icon or use the TeXTeX View menu item. A preview window will appear with your typeset display (see ). Bitmap preview fonts in DVI viewers The first time you display your output with a new installation of , there may be a short pause if the previewer needs to create the special bitmaps used for screen previews of some fonts. These give greater accuracy on low-resolution devices like screens. As you continue to work with and your system accumulates these font files, the pause for generating them will disappear. Recent versions of work directly with Type 1 fonts, however, and don't have this delay.
DVI preview
Most previewers have a wide range of scaling, zooming, and measuring functions, but remember this is a picture of your output: you cannot edit the image. To change it, you always edit your source text and reprocess the file. With xdvi and its derivatives like dviview, you can leave the display window open, and after you've reprocessed your document through , moving your mouse back into the window will make the display update automatically (click your mouse if your windowing system needs a click to focus). shows xdvi displaying a page. With a standard three-button mouse you get three levels of micro-zoom to let you inspect fine details.
Previewing with PostScript PostScript is a page description language invented by Adobe and used in laser printers and high-end typesetters. It's been the universal standard for electronically-formatted print files for nearly two decades, and all printers and publishers are accustomed to using it. is a descendant of PostScript, and is rapidly taking over, but PostScript itself is still extremely common, largely because it is very robust, and is usually an file, which makes it very portable and easy to generate (it is actually a programming language in its own right). The drawback is the large size of PostScript files, especially if they contain bitmapped graphics. The dvips program which comes with all systems is used to generate PostScript files directly from your output. These .ps files can be viewed, printed, sent to a platemaker or filmsetter, or put online for downloading. viewers cannot render some PostScript graphical manipulations like rotating and deforming, so an alternative to viewing the DVI file direct is to generate a PostScript file and use a PostScript viewer. You may have to to do this for your publisher anyway, and many editors can be configured to do this by default. Look for a dvips toolbar icon or menu entry and click on it. It's also very simple to do manually: let's assume your file was called mydoc.tex, so processing it has created mydoc.dvi. Just type: dvips -o mydoc.ps mydoc in a command window (see for how to use one) and dvips will create mydoc.ps which can be used both for previewing and printing. To view a PostScript file, you need a PostScript previewer like GSview, which works with the PostScript interpreter Ghostscript, which should have been installed automatically along with your system (if not, install both now: GSview is separately licensed and cannot legally be included in some older distributions, so you may have to download it yourself). GSview can be set to watch the PostScript file and automatically update the display any time the file is changed, without you even having to click on the window. Previewing with PDF The Portable Document Format is a derivative of PostScript. Whereas PostScript is a programming language in itself, is in effect the result of processing a document through PostScript: it's a binary file format, extremely compact, and well-supported on all platforms. If your system is configured to generate files direct instead of files, just open the .pdf file using any previewer or browser. Most editors are configured to display a toolbar icon which will pop up Acrobat Reader or some other viewer with the current output file. Adobe's Acrobat Reader cannot automatically update the view if you reprocess your document, in the way that xdvi and GSview can. You have to close the display with Ctrl W and reload the file with Alt F 1. Bitmap preview fonts in Acrobat Reader Acrobat Reader is extremely poor at rendering Type 3 (bitmap) fonts. If you are using these (either in an old installation which has not been upgraded to Type 1, or with files using specialist fonts only available in Type 3 format), you will see a very fuzzy display at low magnifications. It will print perfectly, but Acrobat Reader's display is disappointing. The solution is to use a better previewer or to upgrade to the Type 1 versions of the fonts if possible, or both. If you need to use Type 3 fonts in s, you probably need to warn your readers to expect a fuzzy display from Acrobat Reader (but good printout), and to change to a better reader if they can.
Printer output printing systems print on almost anything from the simplest dot-matrix printers to the biggest phototypesetters, including all the laser printers and a host of other devices in between. How you do it varies slightly according to how you do your typesetting and previewing: If you are using DVI and you have a previewer which has a print function configured for your printer, you can use that. If not, create a PostScript file and use GSview instead. If you are using PDF you can print directly from your viewer. Be careful about using the Fit to page options, as they will change the size of your document so all your measurements will be different. Non-PostScript printers You can create a PostScript file with dvips (see ) and use GSview to print it (GSview can print PostScript files to almost any make or model of non-PostScript printer). If you have a real PostScript printer or you are using a system with built-in PostScript printing support (such as Linux or Mac), you can create and send PostScript output directly from your editor to the printer without the need to open it in a previewer first. In Emacs, for example, this is what happens when you use the Print menu item. Both the dvips program and all the previewers that print tend to have facilities for printing selected pages, printing in reverse, scaling the page size, page size scaling printing reverse order printing selected pages and printing only odd or even pages for two-sided work. If you are using PostScript there are programs for manipulating the output (pstops), for example to perform page imposition to get 4, 8, or 16 pages to a sheet for making booklets (psnup). Print it! Show that you have understood the process of typesetting, previewing, and printing, by displaying your document and printing it. If you need a non-PostScript/Ghostscript solution, install a separate print driver for your printer. Some may be supplied with your installation, and there are dozens more on . Their names all start with dvi and are followed by an abbreviation for the printer make or model like dvieps for Epson, dvihp for Hewlett-Packard, dvialw for Apple LaserWriters, &etc;. Configure the driver to print directly to the print queue, or pipe it to the print queue manually. On Linux with an HP printer, for example, this would be dvihp mydoc | lpr Microsoft Windows has no easy way to bypass the print spool, but you can do it from an MS-DOS command window with (using a HP printer as an example): dvihp mydoc -o mydoc.hp copy /b mydoc.hp LPT1: Read the documentation for the driver, as the options and defaults vary.
CTAN, packages, <?LaTeX \newline{}?>and online help The Comprehensive Archive Network is a repository of Web and servers worldwide which contain copies of almost every piece of free software related to and . is based on three main servers, and there are several online indexes available. There are complete and systems for all platforms, utilities for text and graphics processing, conversion programs into and out of , printer drivers, extra typefaces, and (possibly the most important) the packages. The three main servers are: Users Group: UK Users Group: Deutschsprachige Anwendervereinigung e.V. (DANTE, the German-speaking Users Group); should always be your first port of call when looking for a software update or a feature you want to use. Please don't ask the network help resources until you have checked and the (). Packages packages using Add-on features for are known as packages. Dozens of these are pre-installed with and can be used in your documents immediately. They should all be stored in subdirectories of texmf/tex/latex named after each package. To find out what other packages are available and what they do, you should use the search page which includes a link to Graham Williams' comprehensive package catalogue. A package is a file or collection of files containing extra commands and programming which add new styling features or modify those already existing. Installed package files all end with .sty (there may be ancillary files as well). When you try to typeset a document which requires a package which is not installed on your system, will warn you with an error message that it is missing (see ), and you can then download the package and install it using the instructions in . You can also download updates to packages you already have (both the ones that were installed along with your version of as well as ones you added). There is no limit to the number of packages you can have installed on your computer (apart from disk space!), but there is probably a physical limit to the number that can be used inside any one document at the same time, although it depends on how big each package is. In practice there is no problem in having even a couple of dozen packages active (the style file for this document uses over 30). Using an existing package To use a package already installed on your system, insert a usepackage command in your document preamble with the package name in curly braces, as we have already seen in earlier chapters. For example, to use the color package, which lets you typeset in colours (I warned you this was coming!), you would type: \documentclass[11pt,a4paper,oneside]{report} \usepackage{color} \begin{document} ... \end{document} You can include several package names in one usepackage command by separating the names with commas, and you can have more than one usepackage command. Some packages allow optional settings in square brackets. If you use these, you must give the package its own separate usepackage command, like geometry shown below: \documentclass[11pt,a4paper,oneside]{report} \usepackage{pslatex,palatino,avant,graphicx,color} \usepackage[margin=2cm]{geometry} \begin{document} \title{\color{red}Practical Typesetting} \author{\color{blue}Peter Flynn\\Silmaril Consultants} \date{\color{green}December 2005} \maketitle \end{document} (Incidentally, this is a rather crude way to do colours in titling on a once-off basis: if it's for a repeatable style we'll see in how it can be automated and kept out of the author's way.) Many packages can have additional formatting specifications in optional arguments in square brackets, in the same way as geometry does. Read the documentation for the package concerned to find out what can be done. Add colour Use the color package to add some colour to your document. Stick with primary colours for the moment. Use the geometry package to change the margins. Reprocess and print your document if you have a colour printer (monochrome printers should print it in shades of grey). and are not the only colour models. Uwe Kern 's xcolor package defines half a dozen, and includes facilities for converting colour values from one model to another. Package documentation packages documentation To find out what commands a package provides (and thus how to use it), you need to read the documentation. In the texmf/doc subdirectory of your installation there should be directories full of .dvi files, one for every package installed. These can be previewed or printed like any other file (see ). If your installation procedure has not installed the documentation, the files can all be downloaded from . Before using a package, you should read the documentation carefully, especially the subsection usually called User Interface, which describes the commands the package makes available. You cannot just guess and hope it will work: you have to read it and find out. See the next section for details of how to create the documentation .dvi file for additional packages you install yourself. Read all about it Find and view (or print) the documentation on the geometry package you used in . Investigate some of the other package documentation files in the directory. Downloading and installing packages packages downloading packages installing Once you have identified a package you need and haven't already got (or you have got it and need to update it), use the indexes on any server to find the package you need and the directory where it can be downloaded from. Downloading packages What you need to look for is always two files, one ending in .dtx and the other in .ins. The first is a DOC DOC file, which combines the package program and its documentation in a single file. The second is the installation routine (much smaller). You must always download both files. If the two files are not there, it means one of two things: Either the package is part of a much larger bundle which you shouldn't normally update unless you change version of ; For example, there is no color.dtx and color.ins for the color package because it forms part of the graphics bundle, which is installed on all systems anyway. Such packages change very rarely, as they form part of the core of and are very stable. In general you should never try to update these packages in isolation. or it's one of a few rare or unusual packages still supplied as a single .sty file intended for the now obsolete  2.09. You can try to use these if you wish but they are not guaranteed to work, and have now almost all been replaced by versions. Always look for the .dtx and .ins pair of files first. Download both files to a temporary directory. If you use Windows, keep a folder like C:\tmp or C:\temp for this; Mac and Linux systems already have a /tmp directory. Installing a package There are four steps to installing a package: packages installing Extract the files Run on the .ins file. That is, open the file in your editor and process it as if it were a document (which is it), or if you prefer, type latex followed by the .ins filename in a command window in your temporary directory. This will extract all the files needed from the .dtx file (which is why you must have both of them present in the temporary directory). Note down or print the names of the files created if there are a lot of them (read the log file if you want to see their names again). Create the documentation Run on the .dtx file twice. This will create a .dvi file of documentation explaining what the package is for and how to use it. Two passes through are needed in order to resolve any internal crossreferences in the text (a feature we'll come onto later). If you prefer to create then run pdf instead. View or print this file in the usual manner (see ). Install the files While the documentation is printing, move or copy the files created in from your temporary directory to the right place[s] in your  local installation directory tree—always your local directory tree, to prevent your new package accidentally overwriting files in the main directories to avoid your newly-installed files being overwritten when you next update your version of . Where to put files from packages Type Directory (under texmf-local/) Description .cls tex/latex/base Document class file .sty tex/latex/packagename Style file: the normal package content .bst bibtex/bst/packagename style .mf fonts/source/public/typeface &metafont; outline .fd tex/latex/mfnfss Font Definition files for &metafont; fonts .fd tex/latex/psnfss Font Definition files for PostScript Type 1 fonts .pfb /fonts/type1/foundry/typeface PostScript Type 1 outline .afm /fonts/afm/foundry/typeface Adobe Font Metrics for Type 1 fonts .tfm /fonts/tfm/foundry/typeface Font Metrics for &metafont; and Type 1 fonts .vf /fonts/vf/foundry/typeface virtual fonts .dvi /doc package documentation .pdf /doc package documentation others tex/latex/packagename other types of file unless instructed otherwise
The right place sometimes causes confusion, especially if your installation is old or does not conform to the Directory Structure. For a -conformant system, this is either for packages, a suitably-named subdirectory of texmf-local/tex/latex/ See for how to create a parallel structure in your local directory if your installation didn't create one for you. a suitably-named subdirectory of texmf-local/ for files like styles which are not just for but can be used in other systems . Suitably-named means sensible and meaningful (and probably short). For a package like paralist, for example, I'd call the directory paralist. Often there is just a .sty file to move but in the case of complex packages there may be more, and they may belong in different locations. For example, new packages or font packages will typically have several files to install. This is why it is a good idea to create a subdirectory for the package rather than dump the files into misc along with other unrelated stuff. If there are configuration or other files, read the documentation to find out if there is a special or preferred location to move them to.
Update your index packages indexing Finally, run your indexer program to update the package database. This program comes with every modern version of and is variously called texhash, mktexlsr, or even configure, or it might just be a mouse click on a button or menu in your editor. Read the documentation that came with your installation to find out which it is.
This last step is utterly essential, otherwise nothing will work. Install a package Download and install the paralist package (which implements inline lists). The reason this process has not been automated widely is that there are still thousands of installations which do not conform to the , such as old shared Unix systems and some Microsoft Windows systems, so there is no way for an installation program to guess where to put the files: you have to know this. There are also systems where the owner, user, or installer has chosen not to follow the recommended directory structure, or is unable to do so for political or security reasons (such as a shared system where she cannot write to a protected directory). The reason for having the texmf-local directory (called texmf.local on some systems) is to provide a place for local modifications or personal updates, especially if you are a user on a shared or managed system (Unix, Linux, VMS, Windows NT/2000/XP, &etc;) where you may not have write-access to the main installation directory tree. You can also have a personal texmf subdirectory in your own login directory. Your installation must be configured to look in these directories first, however, so that any updates to standard packages will be found there before the superseded copies in the main texmf tree. All modern installations should do this anyway, but if not, you can edit texmf/web2c/texmf.cnf yourself. There is an example in .
Replicating the TDS The Directory Structure is documented at . I find it useful to make the directory structure of texmf-local the same as that of texmf. Examine the subdirectories of texmf/tex/latex/ for examples. For updates of packages which came with your distribution (as distinct from new ones you are adding yourself), you can then use the same subdirectory name and position in texmf-local/... as the original used in texmf/.... If you want to create the entire subdirectory structure ready for use, you can do it under Unix with the following commands: cd /usr/TeX/texmf find . -type d -exec mkdir -p /usr/TeX/texmf-local/{} \; If you are using Microsoft Windows, you can download Cygwin, which provides you with the standard Unix tools in a shell window. The above command should also work on a Mac running OS X. In all cases, if your installation directory is not /usr/TeX, you need to substitute the actual paths to your texmf and texmf-local directories.
Online help help The indexes and documentation files on are the primary online resource for self-help on specific packages, and you should read these carefully before asking questions about packages. The FAQ For general queries you should read the Frequently-Asked Questions document so that you avoid wasting online time asking about things for which there is already an easily-accessible answer. The is managed by the UK Users Group and can be found at  . The <TeX/>hax mailing list Another support resource is the mailing list . Again, feel free to ask questions, but again, try to answer the question yourself first (and say what you've tried in your message). Web sites The Users Group, as well as most local user groups, maintains a web site () with lots of information about various aspects of the system. See for information on joining TUG. News The Usenet newsgroup is the principal forum for other questions and answers about . Feel free to ask questions, but please do not ask frequently-asked questions: read the instead. The people who answer the questions do so voluntarily, unpaid, and in their own time, so please don't treat this as a commercial support service. To access Usenet news, type the following into your browser's Location or Address window: news:comp.text.tex (if your browser doesn't support Usenet news properly, change it for one that does, like Mozilla), or download one of the many free newsreaders. Note that this means newsreaders for the Usenet News (NNTP) service. It does not mean syndication readers for RSS, which are a different thing entirely—these are unfortunately also sometimes referred to as newsreaders. Commercial support If you need commercial levels of support, such as 24-hour phone contact, or macro-writing services, you can buy one of the several excellent commercial versions of , or contact a consultancy which deals with (details on the TUG Web site).
Other document structures It is perfectly possible to write whole documents using nothing but section headings and paragraphs. As mentioned in , novels, for example, usually consist just of chapters divided into paragraphs. However, it's more common to need other features as well, especially if the document is technical in nature or complex in structure. It's worth pointing out that technical doesn't necessarily mean computer technical or engineering technical: it just means it contains a lot of tekne, the specialist material or artistry of its field. A literary analysis such as (on the marginal notes in the manuscripts of 's novel) is every bit as technical in the literary or linguistic field as the maintenance manual for the Airbus 380 is in the aircraft engineering field. This chapter covers the most common features needed in writing structured documents: lists, tables, figures (including images), sidebars like boxes and panels, and verbatim text (computer program listings). In we will cover footnotes, cross-references, citations, and other textual tools. A little think about structure It's very easy to sit down at a keyboard with a traditional wordprocessor and just start typing. If it's a very short document, or something transient or relatively unimportant, then you just want to type it in and make it look right by highlighting with the mouse and clicking on font styles and sizes. In doing so, you may achieve the effect you wanted, but your actions have left no trace behind of why you made these changes. This is usually unimportant for trivial or short-term documents, but if you write longer or more complex documents, or if you often write documents to a regular pattern, then making them consistent by manual methods becomes a nightmare. 's facilities for automation are based on you providing this why information. If your documents have any of the features below, then you have probably already started thinking about structure. The document naturally divides into sections (parts, chapters, &etc;). The document is long. There is lots of repetitive formatting in the document. The document is complex (intellectually or visually). There are lots of figures or tables (or examples, exercises, panels, sidebars, &etc;). Accuracy is important in formatting the document. A master copy is needed for future reference or reprinting. This is a formal or official document needing special care and attention. It's my thesis, book, leaflet, pamphlet, paper, article, &etc; That's why I care. The document (or part of it) may need ongoing or occasional re-editing and republishing. If you've got that far, you're over half-way done. Using a structural editor—even a simple outliner—can make a huge difference to the quality of your thinking because you are consciously organising your thoughts before setting them down. And it can make just as big a difference to your formatting as well: more consistent, better presented, easier for the reader to navigate through, and more likely to be read and understood—which is presumably why you are writing the document in the first place. Lists lists Lists are useful tools for arranging thoughts in a digestible format, usually a small piece of information at a time. There are four basic types of list, shown in . Types of lists Random or arbitrary lists (sometimes called itemized or bulleted lists) where the order of items is unimportant. The items are often prefixed with a bullet or other symbol for clarity or decoration, but are sometimes simply left blank, looking like miniature paragraphs (when they are known as simple or trivial lists). Enumerated or sequential lists (sometimes called numbered lists) where the order of items is critical, such as sequences of instructions or rankings of importance. The enumeration can be numeric (Arabic or Roman), or lettered (uppercase or lowercase), and can even be programmed to be hierarchical (1.a.viii, 2.3.6, &etc;). Descriptive or labelled lists (sometimes called discussion lists), which are composed of subheadings or topic labels (usually unnumbered but typographically distinct), each followed by one or more indented paragraphs of discussion or explanation. Inline lists which are sequential in nature, just like enumerated lists, but are formatted within their paragraph usually labelled with letters,  like this example. The items are often mutually inclusive or exclusive, with the final item prefixed by and or or respectively.
There are actually two other types, segmented lists and reference lists, but these are much rarer, and outside the scope of this document. environment The structure of lists in is identical for each type, but with a different environment name. Lists are another example of this technique (environments), where a pair of matched commands surrounds some text which needs special treatment. Within a list environment, list items are always identified by the command item (followed by an item label in [square brackets] in the case of labelled lists). You don't type the bullet or the number or the formatting, it's all automated. Itemized lists lists itemized lists bulleted To create an itemized list, use the the itemize environment: \begin{itemize} \item Itemized lists usually have a bullet; \item Long items use `hanging indentation', whereby the text is wrapped with a margin which brings it clear of the bullet used in the first line of each item; \item The bullet can be changed for any other symbol, for example from the \textsf{bbding} or \textsf{pifont} package. \end{itemize} Itemized lists usually have a bullet; Long items use hanging indentation, whereby the text is wrapped with a margin which brings it clear of the bullet used in the first line of each item; The bullet can be changed for any other symbol, for example from the bbding or pifont package. The default list bullet is round and solid If your browser font doesn't show it, don't worry: most don't. will. (•) which is also available with the command textbullet if you load the textcomp package. See for details of how to change the settings for list item bullets. Enumerated lists lists numbered lists enumerated To create an enumerated list, use the enumerate environment: \begin{enumerate} \item Enumerated lists use numbering on each item (can also be letters or roman numerals); \item Long items use `hanging indentation' just the same as for itemized lists; \item The numbering system can be changed for any level. \end{enumerate} Enumerated lists use numbering on each item (can also be letters or roman numerals); Long items use hanging indentation, just the same as for itemized lists; The numbering system can be changed for any level. See for details of how to change the numbering schemes for each level. In standard document classes, the vertical spacing between items, and above and below the lists as a whole, is more than between paragraphs. If you want tightly-packed lists, use the mdwlist package, which provides starred versions (itemize*, enumerate*, etc). Description lists lists description lists discussion To create a description list, use the description environment: \begin{description} \item[Identification:] description lists require a topic for each item given in square brackets; \item[Hanging indentation:] Long items use this in the same way as all other lists; \item[Reformatting:] Long topics can be reprogrammed to fold onto multiple lines. \end{description} Identification: description lists require a topic for each item given in square brackets; Hanging indentation: Long items use this in the same way as all other lists; Reformatting: Long topics can be reprogrammed to fold onto multiple lines. All three of these types of lists can have multiple paragraphs per item: just type the additional paragraphs in the normal way, with a blank line between each. So long as they are still contained within the enclosing environment, they will automatically be indented to follow underneath their item. Inline lists lists inline Inline lists are a special case as they require the use of the paralist package which provides the inparaenum environment (with an optional formatting specification in square brackets): \usepackage{paralist} ... \textbf{\itshape Inline lists}, which are sequential in nature, just like enumerated lists, but are \begin{inparaenum}[\itshape a\upshape)]\item formatted within their paragraph; \item usually labelled with letters; and \item usually have the final item prefixed with `and' or `or'\end{inparaenum}, like this example. Inline lists, which are sequential in nature, just like enumerated lists, but are formatted within their paragraph usually labelled with letters usually have the final item prefixed with and or or , like this example. See for details of the font-changing commands used in the optional argument to inparaenum. List practice Add some lists to your document. Pick any two of the ones described here to practice with. If you successfully installed paralist in then you can use inline lists as described in . Reference lists and segmented lists Reference lists are visually indistinguishable from numbered or lettered lists, but the numbering or lettering does not imply a sequence. The numbers or letters are just used as labels so that the items can be referred to from elsewhere in the text (as in see item 501(c)3). In this sense they are really a kind of sub-sectional division, and 's paragraph or subparagraph commands (with appropriate renumbering) would probably be a far better solution than using a list. Label them and refer to them with label and ref as for any other cross-reference (see ). Segmented lists are a highly specialised structure and outside the scope of this document. For details of their usage, see the Segmentation and Alignment. Lists within lists You can start a new list environment within the item of an existing list, so you can embed one list inside another up to four deep. The lists can be of any type, so you can have a description list containing an item in which there is a numbered sub-list, within which there is an item containing a bulleted sub-sub-list. by default an outer enumerated list is numbered in Arabic numerals; an embedded enumerated list is lettered in lowercase; a third level is numbered in lowercase Roman numerals; the fourth level uses uppercase alphabetic letters. Multiple embedded lists automatically change the bullet or numbering scheme so that the levels don't get confused, and the spacing between levels is adjusted to become fractionally tighter for more deeply nested levels. These are only defaults and can easily be changed by redefining the relevant set of values. You could also add a fifth and further levels, although I suspect that would mean your document structure needed some careful analysis, as lists embedded five deep will probably confuse your readers. The values for lists come in pairs: for each level there is a counter to count the items and a command to produce the label: In fact, any time you define a counter in , you automatically get a command to reproduce its value. So if you defined a new counter example to use in a teaching book, by saying \newcounter{example}, that automatically makes available the command \theexample for use when you want to display the current value of example. Level Default Counter Label command 1 digit. enumi theenumi 2 (letter) enumii theenumii 3 roman. enumiii theenumiii 4 LETTER. enumiv theenumiv Note that each counter and command ends with the Roman numeral value of its level (this is to overcome the rule that commands can only be made of letters—digits wouldn't work here). To change the format of a numbered list item counter, just renew the meaning of its label: \renewcommand{\theenumi}{\Alph{enumi}} \renewcommand{\theenumii}{\roman{enumii}} \renewcommand{\theenumiii}{\arabic{enumiii}} This would make the outermost list use uppercase letters, the second level use lowercase roman, and the third level use ordinary Arabic numerals. The fourth level would remain unaffected. Nesting Extend your use of lists by nesting one type inside a different one. Lists: a caution to the unwary Treat lists with care: people sometimes use tables for labelled information which is really a list and would be better handled as such. They often do this because their wordprocessor has no way to do what they want (usually to place the item label level with the description or explanation) except by using a table, hence they are misled into believing that their text is really a table when it's actually not.
Tables tables Tabular typesetting is the most complex and time-consuming of all textual features to get right. This holds true whether you are typing in plain-text form, using a wordprocessor, using , using or , using a system, or some other text-handling package. Fortunately, provides a table model with a mixture of defaults and configurability to let it produce very high quality tables with a minimum of effort. Terminology , in common with standard typesetting practice, uses the word Table to mean a formal textual feature, numbered and with a caption, referred to from the text (as in See Table 5). Sometimes you can get informal tables, which simply occur between two paragraphs, without caption or number. The arrangement of information in rows and columns within either of these structures is called a tabulation or tabular matter. It is important to keep this distinction firmly in mind for this section. Floats floats Tables and Figures are what printers refer to as floats. This means they are not part of the normal stream of text, but separate entities, positioned in a part of the page to themselves (top, middle, bottom, left, right, or wherever the designer specifies). They always have a caption describing them and they are always numbered so they can be referred to from elsewhere in the text. automatically floats Tables and Figures, depending on how much space is left on the page at the point that they are processed. If there is not enough room on the current page, the float is moved to the top of the next page. This can be changed by moving the Table or Figure definition to an earlier or later point in the text, or by adjusting some of the parameters which control automatic floating. Authors sometimes have many floats occurring in rapid succession, which raises the problem of how they are supposed to fit on the page and still leave room for text. In this case, stacks them all up and prints them together if possible, or leaves them to the end of the chapter in protest. The skill is to space them out within your text so that they intrude neither on the thread of your argument or discussion, nor on the visual balance of the typeset pages. But this is a skill few authors have, and it's one point at which professional typographic advice or manual intervention may be needed. There is a float package which lets you create new classes of floating object (perhaps Examples or Exercises). Formal tables To create a Table, use the table environment containing a caption command where you type the caption, and a label command to give the Table a label by which you can refer to it. \begin{table} \caption{Project expenditure to year-end 2006} \label{ye2006exp} ... \end{table} Numbering is automatic, but the label command must follow the caption command, not precede it. The numbering automatically includes the chapter number in document classes where this is appropriate (but this can of course be overridden). The caption command has an optional argument to provide a short caption if the full caption would be too long for the List of Tables: \caption[Something short]{Some very long caption that will only look reasonable in the full figure.} Tabular matter Within a Table, you can either typeset the tabular matter using , or include a table captured as an image from elsewhere. We will see how to include images in on Figures, where they are more common. To typeset tabular matter, use the tabular environment. The \begin{tabular} command must be followed by a compulsory second argument in curly braces giving the alignment of the columns. These are specified for each column using one of single letters l, c, and r for left-aligned, centered, or right-aligned text, or the letter p followed by a width argument if you want a long entry to wrap to several lines (a miniature paragraph as a single cell on each row). 's original tabular settings were designed for classical numerical tabulations, where each cell contains a single value. The p specification allows a cell to be a miniature paragraph set to a specific width. These are p column specifications are not multi-row entries, they are single cells which contain multiple lines of typesetting: the distinction is very important. Auto-adjusting space between columns is possible with the tabularx package, but the auto-resizing column widths used in web pages are not available in . The array package provides for many other typographic variations such as left-aligned, right-aligned, and centred multi-line columns, and other packages provide decimal-aligned columns, row-spanning and column-spanning, multi-page, and rotated (landscape format) tables. Project expenditure to year-end 2006 Item &EUR; Amount Total 64,783 a) Salaries (2 research assistants) 28,000 Conference fees and travel expenses 14,228 Computer equipment (5 workstations) 17,493 Software 3,562 b) Rent, light, heat, &etc; 1,500 The Institute also contributes to (a) and (b).
As an example, a tabular setting with three columns, the first one centered, the second left-aligned, and the third one right-aligned, would therefore be specified as {clr}, as in the example below. Note the use of indentation to make the elements of the table clear for editing, and note also how the typeset formatting is unaffected by this (see ). You do not need to format the tabular data in your editor: does this for you when it typesets the table, using the column specifications you provided. Extra space is automatically added between columns, and can be adjusted by changing the tabcolsep dimension. Takaaki Ota provides an excellent Tables mode for Emacs which provides a spreadsheet-like interface and can generate table source code (see ).
Tables mode for <productname>Emacs</productname>
It is conventional to centre the tabular setting within the Table, using the center environment (note US spelling) or the centering command. The entries for each cell are separated by an ampersand character (&) and the end of a row is marked by the double-backslash (\\). The hline command draws a rule across all columns and the cline command draws a rule across a range of columns (here, under column three only—the argument needs a range). If used, these commands follow the \\ of the row they apply to. There are some extra formatting commands after the tabular material in the example. These are explained in . If there is no data for a cell, just don't type anything—but you still need the & separating it from the next column's data. The astute reader will already have deduced that for a table of n columns, there must always be n 1 ampersands in each row. The exception to this is when the multicolumn command is used to create cells which span multiple columns. There is also a package (multirow) to enable cells to span multiple rows, but both of these techniques are outside the scope of this document.
Tabular techniques for alignment As mentioned earlier, it's also perfectly possible to typeset tabular matter outside a formal Table, where you want to lay out an informal tabulation between paragraphs where a fully floating formal Table would be unnecessary (these are usually quite short: there are several of them in this document). Tabular mode can also be used wherever you need to align material side by side, such as in designing letterheads, where you may want your company logo and address on one side and some other information on the other. By default, typesets tabular environments inline to the surrounding text, so if you want your alignment displayed by itself, put it inside a positioning environment like center, flushright, or flushleft, or leave a blank line or par before and after so it gets typeset separately. There is much more to tabular setting: full details are in the manuals mentioned in . One final note to remind you of the automated crossreferencing features: because the example table is labelled, it can be referenced from anywhere in the document as just by using \ref{ye2006exp}, regardless of how much the surrounding document or structure is moved or edited. Create a tabulation Create one of the following in your document: a formal Table with a caption showing the number of people in your class broken down by age and sex; an informal tabulation showing the price for three products; the logo \setlength{\fboxsep}{-3pt}\setlength{\fboxrule}{.4pt} \fbox{\begin{tabular}{cc}\tiny YEAR\\[-.8em]\tiny 2 0 0 0\vrule depth1em width0pt\end{tabular}} (hint: )
Figures figures floats As explained in , Figures and Tables float to a vacant part of the page, as they are not part of the sequence of sentences making up your text, but illustrative objects that you refer to. Figures can contain text, diagrams, pictures, or any other kind of illustration. To create a figure, use the figure environment: like Tables, they automatically get numbered, and must include a caption (with a label after the caption, if needed, exactly the same as for Tables) \begin{figure} \caption{Total variable overhead variance (after \citeauthor[p.191]{bull}} \label{workeff} \begin{center} \includegraphics[width=.75\columnwidth]{diagram} \end{center} \end{figure}
Total variable overhead variance (after <citetitle ref="bull" show="both">p.191</citetitle>)
You can see that the structure is very similar to the table environment, but in this case we have a graphic included. Details of this command (includegraphics) are in the next section. Details of the bibliographic citation mechanism are in The content of the Figure could of course also be textual, in the form of a list or a text diagram. has a simple drawing environment called picture, which lets you create a limited set of lines and curves, but for a diagram of any complexity, you should use a standard vector drawing program (see ).
Images images graphics Images (graphics) can be included anywhere in a document, although in most cases of formal documents they will occur in Figures (see preceding section). To use graphics, you need to use the graphicx package in your preamble: \usepackage{graphicx} You may find a lot of old files which use a package called epsf. Don't use it. It's obsolete. This enables the command includegraphics which is used to insert an image in the document. The command is followed by the name of your graphics file without the filetype, for example: \includegraphics{myhouse} (we'll see in a minute why you don't include the filetype). In most cases you should just make sure the image file is in the same folder (directory) as the document you use it in. This avoids a lot of messing around remembering where you put the files. If you have images you want to use in several different documents in different places on your disk, there is a way to tell where to look (see ). For standard with dvips, graphics files must be in Encapsulated PostScript format: this has been the publishing industry standard for portable graphics for many years, and no other format will work portably in standard . Some distributions of systems allow other formats to be used, such as , Microsoft Bitmap files, Hewlett-Packard's Printer Control Language files, and others; but you cannot send such documents to other users and expect them to work if they don't have the same distribution installed as you have. Stick to . All good graphics packages can save images as , but be very careful because some packages, especially on Microsoft Windows platforms, use a very poor quality driver, which creates very poor quality files. If in doubt, check with an expert. If you find an graphic doesn't print, the chances are it's been badly made by the graphics software. Download Adobe's own PostScript driver from their Web site instead. For pdf, graphics files can be in Portable Network Graphic, Joint Photographic Experts Group, or format, not . This means if you want to use both standard as well as pdf, you need to keep your graphics in two formats, and one of the others. This is why you don't include the filetype in the filename you give with includegraphics: will assume and pdf will look for , or files matching the name. The includegraphics command can take optional arguments within square brackets before the filename to specify either the height or width, and the other dimension will automatically change to scale. If you specify both, the image will be distorted to fit. You can scale an image by a factor instead of specifying height or width; clip it to specified coordinates; and rotate it in either direction. Multiple optional arguments are separated with commas. \begin{center} \includegraphics[width=3cm]{twithcat} \end{center} For details of all the arguments, see the documentation on the graphicx package or a copy of the . This package also includes commands to \raisebox{1ex}{\rotatebox{180}{rotate}}, \scalebox{-1}[1]{mirror}, and \scalebox{2}[1]{scale} text. rotate mirror scale It is in fact possible to tell to generate the right file format by itself, but this requires an external command-line graphics converter, and as it gets done afresh each time, it slows things down rather a lot. files, especially bitmaps, can be very large indeed, because they are stored in format. Staszek Wawrykiewicz has drawn my attention to a useful MS-DOS program to overcome this, called cep (Compressed Encapsulated Postscript) available from in the support/pstools directory, which can compress files to a fraction of their original size. The original file can be replaced by the new smaller version and still used directly with includegraphics. Making images There are two types of image: bitmaps and vectors. Bitmaps Bitmap images are made of coloured dots, so if you enlarge them, they go jagged at the edges, and if you shrink them, they go blurry. Bitmaps are fine for photographs, where every dot is a different colour, and no-one will notice if you don't shrink or enlarge too much. Bitmaps for diagrams and drawings, however, are almost always the wrong choice, and often disastrously bad. Vectors Vector drawings are made from instructions (eg draw this from here to here, using a line this thick). They can be enlarged or shrunk as much as you like, and never lose accuracy, because they get redrawn automatically at any size. You can't do photographs as vectors, but it's the only acceptable method for drawings or diagrams. Vector graphic packages are also better suited for saving your image directly in or format (both of which use vectors internally). All the major graphics-generating packages in all disciplines output vector formats: AutoCAD, ChemDraw, MathCAD, Maple, Mathematica, ArcInfo, and so on. is the universally-accepted format for creating vector graphics for publication, with a close second. Most of the major graphics (drawing) packages can also save as , such as PhotoShop, PaintShop Pro, Adobe Illustrator, Corel Draw, and GIMP. There are also some free vector plotting and diagramming packages available like tkPaint and GNUplot which do the same. Never, ever (except in the direst necessity) save any diagram as a bitmap.
The diagram from <xref linkend="workeff"/> shrunk and enlarged
Bitmap formats like and are ideal for photographs, as they are also able to compress the data substantially without too much loss of quality. However, compressed formats are bad for screenshots, if you are documenting computer tasks, because too much compression makes them blurry. The popular Graphics Interchange Format is good for screenshots, but is not supported by : use instead, with the compression turned down to minimum. Avoid uncompressible formats like as they produce enormous and unmanageable files. The Tagged Image File Format, popular with graphic designers, should also be avoided because far too many companies have designed and implemented non-standard, conflicting, proprietary extensions to the format, making it virtually useless for transfer between different types of computers (except in faxes, where it's still used in a much stricter version). Adding pictures Add \usepackage{graphicx} to the preamble of your document, and copy or download an image you want to include. Make sure it is a , , or image if you use pdf, or an image if you use standard . Add includegraphics and the filename in curly braces (without the filetype), and process the document and preview or print it. Make it into a figure following the example in . Be aware that some previewers are not able to display all types of graphics, and some cannot display colour. For best results, use or PostScript preview.
Graphics storage I mentioned earlier that there was a way to tell where to look if you had stored images centrally for use in many different documents. The answer is in a command graphicspath which you supply with an argument giving the name of an additional directory path you want searched when a file uses the includegraphics command, for example: \graphicspath{c:\mypict~1\camera} \graphicspath{/var/lib/images} \graphicspath{HardDisk:Documents:Reports:Pictures} I've used the safe (MS-DOS) form of the Windows My Pictures folder because it's A Bad Idea to use directory names containing spaces (see ). Using graphicspath does make your file less portable, though, because file paths tend to be specific both to an operating system and to your computer, like the examples above.
Verbatim text verbatim text If you are documenting computer procedures, you probably need fixed-width type for examples of programming or data input or output. Even if you are writing about completely non-computer topics, you may often want to quote a or email address which needs to be typeset specially. It is particularly important in these two examples to avoid hyphenating them if they have to break over a line-end, because the hyphen might be taken by the user as a part of the address. Standard includes two features for handling fixed-format text, and there are many more available in packages. Inline verbatim To specify a word or phrase as verbatim text in typewriter type within a sentence, use the special command verb, followed by your piece of text surrounded by any suitable character which does not occur in the text itself. This is a very rare exception to the rule that arguments go in curly braces. I often use the plus sign for this, for example to show a command, I type \verb+\includegraphics[width=3in]{myhouse}+ in order to display \includegraphics[width=3in]{myhouse}, but sometimes I use the grave accent (backtick or open-quote) or the vertical bar when the phrase already has a plus sign in it, like \verb|\(y=a+2x^2\)| when illustrating the equation \(y=a+x^2\). This command has the advantage that it turns off all special characters (see ) except the one you use as the delimiter, so you can easily quote sequences of characters in any computer syntax without problems. However, will never break the argument of verb at a line-end when formatting a paragraph, even if it contains spaces, so if it happens to be long, and falls towards the end of a line, it will stick out into the margin. See for more information on line-ends and hyphenation. The url package avoids this by providing the command url which works in the same way as verb, with the argument enclosed in a pair of characters, but performs a hyphenless break at punctuation characters, as in http://www.ucc.ie:8080/cocoon/cc/docs/siteowner.xml. It was designed for Web s, The original term Uniform Resource Locator is now strongly deprecated in the Web community in favour of the more accurate Uniform Resource Indicator. For details see . Unfortunately the older term still persists, especially in and markup. so it understands their syntax and will never break mid-way through an unpunctuated word, only at slashes and full points. Bear in mind, however, that spaces are forbidden in s, so using spaces in url arguments will fail, as will using other non--valid characters. Display verbatim For longer (multiline) chunks of fixed-format text, use the verbatim environment: \begin{verbatim} \documentclass[11pt,a4paper,oneside]{report} \begin{document} \title{Practical Typesetting} \author{Peter Flynn\\Silmaril Consultants} \date{December 2004} \maketitle \end{document} \end{verbatim} Like verb, this turns off all special characters, so you can include anything at all in the verbatim text except the exact line \end{verbatim} For more control over formatting, however, I recommend the use of the fancyvrb package, which provides a Verbatim environment (note the capital letter) which lets you draw a rule round the verbatim text, change the font size, and even have typographic effects inside the Verbatim environment. It can also be used in conjunction with the fancybox package (see ), and it can add reference line numbers (useful for chunks of data or programming), and it can even include entire external files. Try some fixed-format text Add your email address and home page using the verb and url commands. You'll need to \usepackage{url} for the latter. If you know some programming, try a few lines enclosed in verbatim and Verbatim environments. Boxes, sidebars, and panels boxes sidebars panels , like most typesetting systems, works by setting text into boxes. The default box is the width of the current page, and works like an old compositor's galley (tray) from the days of metal type: it accumulates typeset text until it's a bit longer than the specified page height. At this stage works out how much of it really will fit on a page, snips it off and ships it out to the or file, and puts the rest back into the galley to accumulate towards the following page. Boxes of text Because of this box model, can typeset any text into a box of any width wherever on the page you need it. The simplest command for small amounts of text is parbox. This command needs two arguments in curly braces: the first is the width you want the text set to, and the second is the text itself, for example: \parbox{1in}{Please make sure you send in your completed forms by January 1st next year, or the penalty clause 2(a) will apply} Please make sure you send in your completed forms by January 1st next year, or the penalty clause 2(a) will apply The text is typeset to the required width, and the box is extended downwards for as long as is required to fit the text. Note that the baseline of a parbox is set to the midpoint of the box; that is, if you include a parbox in mid-sentence, the centre of the box will be lined up with the line of type currently being set. Like this small paragraph. You can specify that it should be the top or bottom by adding an optional or in square brackets before the width. For example, \parbox[t]{1in}{...} will produce a box with the baseline aligned with the top line of the text in the box. Notice that when setting very narrow measures with type that is too large, the spacing may become uneven and there may be too much hyphenation. Either use raggedright or reduce the type size, or (in extreme cases) reword the text or break each line by hand. It is rare for to need this: the example above was deliberately chosen to be obtuse as an illustration. Where the contents is more extensive or more complicated, you can use the minipage environment. Within this you can use virtually everything that occurs in normal text (⪚ lists, paragraphs, tabulations, &etc;) with the exception of floats like tables and figures. The minipage environment has an argument just like parbox does, and it means the same: the width you want the text set to. Note that in minipages and parboxes, the paragraph indentation (parindent) is reset to zero. If you need to change it, set it inside the minipage or parbox using the setlength command (see ). \begin{minipage}{3in} Please make sure you send in your completed forms by January 1st next year, or the penalty clause 2(a) will apply. \begin{itemize} \item Incomplete forms will be returned to you unprocessed. \item Forms must be accompanied by the correct fee. \item There is no appeal. The adjudicators' decision is final. \end{itemize} \end{minipage} Please make sure you send in your completed forms by January 1st next year, or the penalty clause 2(a) will apply. Incomplete forms will be returned to you unprocessed. Forms must be accompanied by the correct fee. There is no appeal. The adjudicators' decision is final. There are two other ways of typesetting text to widths other than the normal text width: you can use a one-row, one-cell tabular environment with the p column type specification, or you can use the vbox command, which is raw , and outside the scope of this document. Framed boxes To put a frame round \fbox{some text}, use the fbox command: \fbox{some text}. This works for a few words in mid-line, but the framed box and its contents won't break over the end of a line. To typeset multiline text in a box, put it in a parbox, or use a minipage or tabular environment as described above, and enclose the whole thing in a fbox. \fbox{\begin{minipage}{3in} This multiline text is more flexible than a tabular setting: \begin{itemize} \item it can contain any type of normal typesetting; \item it can be any specified width; \item it can even have its own footnotes\footnote{Like this}. \end{itemize} \end{minipage}} This multiline text is more flexible than a tabular setting: it can contain any type of normal typesetting; it can be any specified width; it can even have its own footnotes. Like this. The spacing between text and box is controlled by the value of fboxsep, and the thickness of the line by fboxrule. The following values were used above: \setlength{\fboxsep}{1em} \setlength{\fboxrule}{2pt} As we saw before, setting justified text in narrow measures will produce poor spacing: either use the raggedright command, or change the font size, or add explicit extra hyphenation points. Note the \begin{tabular} and \begin{minipage} commands still need the width specifying: in the case of the \begin{tabular} by the use of the p column type with its width specification, and in the case of \begin{minipage} by the second argument. \fbox{\begin{tabular}{p{1in}} Multiline text in a box typeset using \textsf{tabular} \end{tabular}} Multiline text in a box typeset using tabular Sidebars and panels The fancybox package lets you extend the principle of fbox with commands to surround text in square, oval (round-cornered), and drop-shadow boxes (⪚ ovalbox, shadowbox, &etc;: see the documentation for details). You can create panels of any size with these borders by using the minipage environment to typeset the text inside a special Sbox environment which fancybox defines. The minipage formats the text but the Sbox captures it, allowing you to put the frame round it as it prints. The printed version of this document uses this extensively and there is a useful example shown in .
Textual tools tools Every text-handling system needs to support a repertoire of tools for doing things with text. implements many dozens, of which a small selection of the most frequently used is given here: offset quotations (sometimes called block quotes); footnotes and end-notes; marginal notes; cross-references, both normal ones and bibliographic citations; indexes and glossaries; typesetting in multiple columns. Quotations Direct speech and short quotes within a sentence like this are done with simple quotation marks as described in . Sometimes, however, you may want longer quotations set as a separate paragraph. Typically these are indented from the surrounding text. has two environments for doing this. Such quotations are often set in a smaller size of type, although this is not the default, hence the use of the small command in the second example. The inclusion of the bibliographic citation at the end is optional: here it is done with a non-standard command citequote which I invented for this example (there is more about how to do things like this in ). The quote environment is for up to a line of text each per (short) quotation, with the whole thing indented from the previous paragraph but with no additional indentation on each quote; \begin{quote} Do, Ronny, Do. \textit{Nancy Reagan} Da Do Ron Ron. \textit{The Crystals} \end{quote} Do, Ronny, Do. Nancy Reagan Da Do Ron Ron. The Crystals The quotation environment is for longer passages (a paragraph or more) of a single quotation, where not only is the block of text indented, but each paragraph of it also has its own extra indentation on the first line. \begin{quotation}\small At the turn of the century William Davy, a Devonshire parson, finding errors in the first edition of his \titleof{davy}, asked for a new edition to be printed. His publisher refused and Davy purchased a press, type, and paper. He harnessed his gardener to the press and apprenticed his housemaid to the typesetting. After twelve years' work, a new edition of fourteen sets of twenty-six volumes was issued---which surely indicates that, when typomania is coupled with religious fervour, anything up to a miracle may be achieved.\citequote[p.76]{ryder} \end{quotation}
At the turn of the century William Davy, a Devonshire parson, finding errors in the first edition of his , asked for a new edition to be printed. His publisher refused and Davy purchased a press, type, and paper. He harnessed his gardener to the press and apprenticed his housemaid to the typesetting. After twelve years' work, a new edition of fourteen sets of twenty-six volumes was issued---which surely indicates that, when typomania is coupled with religious fervour, anything up to a miracle may be achieved.
Footnotes and end-notes footnotes The command footnote, followed by the text of the footnote in curly braces, will produce an auto-numbered footnote with a raised small number where you put the command, and the numbered text automatically printed at the foot of the page. Like this. The number is reset to 1 at the start of each chapter (but you can override that and make them run continuously throughout the document, or even restart at 1 on each page or section). automatically creates room for the footnote, and automatically reformats it if you change your document in such a way that the point of attachment and the footnote would move to the next (or preceding) page. Because of the way reads the whole footnote before doing anything with it, you can't use verb () alone in footnotes: either precede it with protect or use [abuse?] the url command instead, which you should be using for Web and email addresses in any case). Footnotes inside minipages (see ) produce lettered notes instead of numbered ones, and they get printed at the bottom of the minipage, not the bottom of the physical page (but this too can be changed). There is a package to hold over your footnotes and make them print at the end of the chapter instead (endnote) or at the end of the whole document, and there is a package to print many short footnotes in a single footnoted paragraph so they take up less space (fnpara). It is also possible to have several separate series of footnotes active simultaneously, which is useful in critical editions or commentaries: a numbered series may be used to refer to an original author's notes; a lettered series can be used for notes by a commentator or authority; and a third series is available for your own notes. It is also possible to format footnotes within footnotes. If your footnotes are few and far between, you may want to use footnote symbols instead of numbers. You can do this by redefining the output of the footnote counter to be the fnsymbol command: \renewcommand{\thefootnote{\fnsymbol{footnote}} There are also ways to refer more than once to the same footnote, and to defer the positioning of the footnote if it occurs in a float like a Table or Figure, where it might otherwise need to move to a different page. Marginal notes marginal notes You can add marginal notes to your textLike this. instead of (or as well as) footnotes. You need to make sure that you have a wide-enough margin, of course: use the geometry package (see ) to allocate enough space, otherwise the notes will be too cramped. There are several packages to help with formatting marginal notes, but the simplest way is to define it yourself. Add this new command to your preamble: \newcommand{\marginal}[1]{% \leavevmode\marginpar{\tiny\raggedright#1\par}} Then you can use \marginal{Some text}Some text where you need it. Be careful, however, because marginal notes are aligned with the line where the command starts, so a very long one followed too closely by another will cause to try and adjust the position so they don't overlap. We're jumping ahead a bit here, as we haven't covered how to define your own commands yet. I won't even try to explain it here, although the attentive reader can probably deduce some of it by inspection. See for more information about making up your own commands. Cross-references cross-references This is one of the most powerful features of . You can label any point in a document with a name you make up, and then refer to it by that name from anywhere else in the document, and will always work out the cross-reference number for you, no matter how much you edit the text or move it around. A similar method is used to cite documents in a bibliography or list of references, and there are packages to sort and format these in the correct manner for different journals. Normal cross-references You label a place in your document by using the command label followed by a short name you make up, in curly braces: This section is labelled normalxref, for example. we've already seen this done for labelling Figures and Tables. \section{New Research} \label{newstuff} You can then refer to this point from anywhere in the same document with the command ref followed by the name you used, ⪚ In \S~\ref{newstuff} there is a list of recent projects. In there is a list of recent projects. (The S command produces a section sign (\S) and the P command produces a paragraph sign (\P).) If the label is in normal text, the reference will provide the current chapter or section number or both (depending on the current document class).Thus I can refer here to \ref{normalxref} and get the value . If the label was inside a Table or Figure, the reference provides the Table number or Figure number prefixed by the chapter number. A label in an enumerated list will provide a reference to the item number. If there is no apparent structure to this part of the document, the reference will be null. Labels must be unique (that is, each value must occur only once as a label within a single document), but you can have as many references to them as you like. Note the use of the unbreakable space (~) between the ref and the word before it. This prints a space but prevents the line ever breaking at that point, should it fall close to the end of a line. The command pageref followed by any of your label values will provide the page number where the label occurred, regardless of the document structure. This makes it possible to refer to something by page number as well as its ref number, which is useful to readers in very long documents. records the label values each time the document is processed, but updated values only get used the next time the document is processed. You always need to process the document an extra time before printing or viewing, if you have changed or added references, to make sure the values are correctly resolved. Unresolved references are printed as two question marks, and also cause a warning message at the end of the log file. There's never any harm in having labels you don't refer to, but using ref when you don't have a matching label is an error. Bibliographic references bibliographies references The mechanism used for references to reading lists and bibliographies is almost identical to that used for normal cross-references. Although it is possible to type the details of each citation manually, there is a companion program to called , which manages bibliographic references automatically. This reduces the time needed to maintain and format them, and dramatically improves accuracy. Using means you only ever have to type the bibliographic details of a work once. You can then cite it in any document you write, and it will get formatted automatically to the style you specify. Citing references works exactly the same way as other bibliographic databases: you keep details of every document you want to refer to in a separate file, using 's own format (see example below). Many writers make a habit of adding the details of every book and article they read, so that when they write a document, these entries are always available for reference. You give each entry a short label, just like you do with normal cross-references (see ), and it is this label you use to refer to in your own documents when you cite the work using the cite command: ...as has clearly been shown by Fothergill~\cite{fg}. By default, this creates a cross-reference number in square brackets [1] which is a common style in the Natural Sciences (see for details of how to change this). There are dozens of alternative citation formats in extra packages, including the popular author/year format: ...as has clearly been shown by~\citeauthoryear{fg}. …as has clearly been shown by . Note that in this case you don't type the author's name because it is automatically extracted by . There are lots of variants on this technique in many packages, allowing you to phrase your sentences with references in as natural a way as possible, and rely on to insert the right data. (If you examine the source of this document you'll find I use some homebrew commands like authorof and titleof which I use for a similar purpose.) To print the bibliographic listing (usually called References in articles and Bibliography in books and reports), add these two lines towards the end of your document, or wherever you want it printed, substituting the name of your own file and the name of your chosen bibliography style: \bibliographystyle{ieeetr} \bibliography{mybib} The bibliography command is followed by the filename of your file without the .bib extension. The bibliographystyle command is followed by the name of any of 's supported bibliography styles, of which there are many dozens available from .The style shown in the example here provides formatting according to the specifications for Transactions of the IEEE (revised). The styles and are two common generic styles used for drafts. The example above uses Transactions of the Institute of Electrical and Electronics Engineers. Running <productname>bibtex</productname> When you run the bibtex program, the details of every document you have cited will be extracted from your database, formatted according to the style you specify, and stored in a temporary bibliographic (.bbl) file with a label corresponding to the one you used in your citation, ready for to use. This is entirely automatic: all you do is cite your references in your document using the labels you gave the entries in your file, and run the bibtex program. After processing your file with , run on it by clicking on the toolbar icon (if your editor has one), or use the TeXBibTeX File menu entry, or type the command bibtex followed by the name of your document (without the .tex extension). When you run again it will use the .bbl file which created, and subsequent runs of will format the correct citation numbers (or author/year, or whatever format you are using). $ latex mybook $ bibtex mybook $ latex mybook $ latex mybook Because of this three-stage process, you always get a warning message about an unresolved reference the first time you add a new reference to a previously uncited work. This will disappear after subsequent runs of bibtex and . In practice, authors tend to run from time to time during writing anyway, so they can preview the document. Just run after adding a new cite command, and subsequent runs of will incrementally incorporate all references without you having to worry about it. You only need to follow the full formal sequence (, , , ) when you have finished writing and want to ensure that all references have been resolved. <BibTeX/> format The format for the file is specified in the documentation (see for how to find and print it). You create a file with a name ending in .bib, and add your entries, for example: @book{fg, title = {{An Innkeeper's Diary}}, author = {John Fothergill}, edition = {3rd}, publisher = {Penguin}, year = 1929, address = {London} } There is a prescribed set of fields for each of a dozen or so types of document: book, article (in a journal), article (in a collection), chapter (in a book), thesis, report, paper (in a Proceedings), &etc; Each entry identifies the document type after the @ sign, followed by the entry label that you make up, and then each field (in any order), using the format: keyword = {value}, Most -sensitive editors have a mode which understands these entries. Emacs automatically uses its bibtex-mode whenever you open a filename ending in .bib. When editing databases, the rules are simple: Omit the comma after the last field in the entry (only—eg after {London} in the example). Titles may have their case changed in some styles: to prevent this, enclose the title in double curly braces as in the example. Values which are purely numeric (⪚ years) may omit the curly braces. Fields can occur in any order but the format must otherwise be strictly observed. Fields which are not used do not have to be included (so if your editor automatically inserts them as blank or prefixed by OPT [optional], you can safely delete them as unused lines). To help with this, there are several interfaces to creating and maintaining files, such as tkbibtex (see ), or pybliographic.
tk<BibTeX/>, one of several graphical interfaces to <BibTeX/> databases
Changing the layout To change the title printed over the reference listing, just change the value of refname (articles) or bibname (books and reports) by adding a line like this in your preamble: \renewcommand{\bibname}{Reading List} The formatting specifications ( styles) are based on standard settings for journals and books from dozens of publishers: you just pick the one you want by name. The texmf/bib/bst subdirectory of your installation contains the ones installed by default, and you can search on for others (look for .bst files). Many of them are named after university press styles (⪚ harvard, oxford) or the publisher or journal which specified them (⪚ elsevier, kluwer, &etc;). Some of them have an accompanying package (.sty) file which you need to include with the normal usepackage command in your preamble. In this case the format may be distributed as .dtx and .ins files and will need installing in the same way as any other package (see ). Always read the documentation, because most of the formats are very specific to the journal they were designed for, and may have fairly absolute requirements. If you are writing for a specific publisher, you should remember that the rules or formats are laid down by the typographic designer of that journal or publisher: you cannot arbitrarily change the format just because you don't happen to like it: it's not your choice! It is also possible to write your own (.bst) style files, although it uses a language of its own which really needs a computer science background to understand. However, this is rendered unnecessary in most cases: there is an extensive program (actually written in ) called makebst, which makes .bst files by asking you a (long) series of questions about exactly how you want your citations formatted. Just type latex makebst in a command window, but give it a dummy run first, because some of the questions are very detailed, so you need to have thought through how you want your citations to appear before you start. Other modes of citation The method of citing a work by numeric reference is common in the Natural Sciences but is not used in Law or the Humanities. In these fields, citations are usually done with short references (author/short-title/year) in a numbered footnote. Sometimes they are actually called footnotes to the exclusion of ordinary footnotes, although they are really citations which happen by convention to be displayed as footnotes: an important distinction rarely appreciated by authors until they come to need a normal footnote. For these fields, the bibliography at the back of the document is printed unnumbered in alphabetic order of author, or perhaps chronologically if the time-frame is very large. This unnumbered format is why it is conventionally called References rather than Bibliography: a sufficient working citation has already been provided in the footnote, and the list at the back is for reference purposes only; whereas in the Natural Sciences, the citation is just a number, or possibly an author and year only, so the full listing is called a Bibliography. The jurabib package (originally intended for German law articles but now extended to other fields in the Humanities, and to other languages) has extensive features for doing this style of citation and is strongly recommended.
Indexes and glossaries indexes glossaries has a powerful, automated indexing facility which uses the standard makeindex program. To use indexing, use the package makeidx and include the makeindex command in your preamble: \usepackage{makeidx} \makeindex When you want to index something, using the command index followed by the entry in curly braces, as you want it to appear in the index, using one of the following formats: Plain entry Typing \index{beer} will create an entry for beer with the current page number.beer Subindex entry For an entry with a subentry use an exclamation mark to separate them: \index{beer!lite}. beer lite Subsubentries like \index{beer!lite!American} work to another level deep. beer lite American Cross-references See entries are done with the vertical bar (one of the rare times it does not get interpreted as a math character): \index{Microbrew|see{beer}} Microbrew beer Font changes To change the style of an entry, use the @-sign followed by a font change command: \index{beer!Rogue!Chocolate Stout@\textit{Chocolate Stout}} This example Chocolate Stout indexes Chocolate Stout and italicises it at the same time. Any of the standard \text... font-change commands work here: see for details. You can also change the font of the index number on its own, as for first-usage references, by using the vertical bar in a similar way to the see entries above, but substituting a font-change command name (without a backslash) such as textbf for bold-face text (see the index) Chocolate Stout : \index{beer!Rogue!Chocolate Stout|textbf} Out of sequence The same method can be used as for font changes, but using the alternate index word instead of the font command name, so \index{Oregon Brewing Company@Rogue} Rogue will add an entry for Rogue in the O section of the index, as if it was spelled Oregon Brewing Company. When the document has been processed through it will have created a .idx file, which you run through the makeindex program by typing (for example): makeindex mythesis Some editors may have a button or menu entry for this. The program will look for the .idx file and output a .ind file. This gets used by the command printindex which you put at the end of your document, where you want the index printed. The default index format is two columns. Glossaries are done in a similar manner using the command makeglossary in the preamble and the command glossary in the same way as index. There are some subtle differences in the way glossaries are handled: both the books by and by duck the issue, but there is some documentation on glotex on . Multiple columns columns Use the multicol package: the environment is called multicols (note the plural form) and it takes the number of columns as a separate argument in curly braces: \usepackage{multicol} ... \begin{multicols}{3} ... \end{multicols} \setlength{\parskip}{0pt}\footnotesize\noindent has built-in support for two-column typesetting via the twocolumn option in the standard Document Class Declarations, but it is relatively inflexible in that you cannot change from full-width to double-column and back again on the same page, and the final page does not balance the column heights. However, it does feature special figure* and table* environments which typeset full-width figures and tables across a double-column setting. The more extensive solution is the multicol package, which will set up to 10 columns, and allows the number of columns to be changed or reset to one in mid-page, so that full-width graphics can still be used. It also balances the height of the final page so that all columns are the same height—if possible: it's not always achievable—and you can control the width of the gutter by setting the columnsep length to a new dimension. Multi-column work needs some skill in typographic layout, though: the narrowness of the columns makes typesetting less likely to fit smoothly because it's hard to hyphenate and justify well when there is little space to manœuvre in.
Fonts and layouts typographics This is the chapter that most users want first, because they come to structured documents from a wordprocessing environment where the only way to convey different types of information is to fiddle with the font and size drop-down menus. As I hope you have seen, this is normally completely unnecessary in , which does most of the hard work for you automatically. However, there are occasions when you need to make manual typographic changes, and this chapter is about how to do them. Changing layout The design of the page can be a very subjective matter, and also rather a subtle one. Many organisations large and small pay considerable sums to designers to come up with page layouts to suit their purposes. Styles in page layouts change with the years, as do fashions in everything else, so what may have looked attractive in 1991 may look rather dated in 2011. As with most aspects of typography, making the document readable involves making it consistent, so the reader is not interrupted or distracted too much by apparently random changes in margins, widths, or placement of objects. However, there are a number of different occasions where the layout usually does change, related to the frequency with which the format appears. The title page, the half-title, copyright page, dedication, and other one-page preliminaries (if you use them) are usually designed individually, as the information on it only occurs once in that format anywhere in the document. The table of contents and other related lists like figures and tables all need to share one design. The prelims like Foreword, Introduction, and Preface should likewise follow the same format between them. Chapter and Appendix start pages usually share a layout. Other (normal) pages have a single layout, but it may specify individual variations to handle tables, lists, figures, sidebars, exercises, footnotes, &etc; If you are going to design a whole document, it's probably a good idea to read a couple of books on layout design first, to get a feel for the conventions which contribute to making the reader comfortable reading. While unusual or radical layouts have an important role in attention-grabbing, or in making a socio-political statement ( magazine is an obvious recent example), they are usually out of place in business reports, white papers, books, theses, and journals. In ephemera, on the other hand, as in advertising, they are probably critical. Spacing page size margins margins We mentioned in and elsewhere the existence of the geometry package which lets you change margins. It also lets you set the text-area height and width and a lot of other layout settings: read the documentation for details (see for how to read package documentation). \usepackage[left=2cm,top=1cm,bottom=2cm,right=3cm, nohead,nofoot]{geometry} The spacing around the individual textual components (headings, paragraphs, lists, footnotes, &etc;) can also be changed on a document-wide basis, as we saw with paragraph spacing and indentation in . Changing the spacing of section headings for the whole document can be done with the sectsty package, designed to let you adjust section-head spacing without having to know about the internal coding, which is quite complex. The spacing for lists can be adjusted with the mdwlist package. In both cases the user with highly specific requirements such as a publisher's Compositor's Specification should read the relevant sections in the or ask for expert help, as there are many internal settings which can also be changed to fine-tune your design, but which need some knowledge of 's internals. All the above are for automating changes so that they occur every time in a consistent manner. You can also make manual changes whenever you need: space white-space Flexible vertical space white-space vertical flexible There are three commands smallskip, medskip, and bigskip. These output flexible (dynamic, or rubber) space, approximately 3pt, 6pt, and 12pt high respectively, and they will automatically compress or expand a little, depending on the demands of the rest of the page (for example to allow one extra line to fit, or a heading to be moved to the next page without anyone except a typographer noticing the change). These commands can only be used after a paragraph break (a blank line or the command par). Fixed vertical space white-space vertical fixed white-space vertical disappearing For a fixed-height space which will not stretch or shrink, use the command vspace followed by a length in curly braces, ⪚ \vspace{18pt} (again, this has to be after a paragraph break). Bear in mind that extra space which ends up at a page-break when the document is formatted will get discarded entirely to make the bottom and top lines fall in the correct places. To force a vertical space to remain and be taken into account even after a page break (very rare), use the starred variant vspace*, ⪚ \vspace*{19pt}. Double spacing white-space double-spacing double-spacing Double-spacing normal lines of text is usually a bad idea, as it looks very ugly. It is still unfortunately a requirement in some universities for thesis submission, a historical relic from the days of typewriters. Nowadays, 1⅓ or 1½ line spacing is considered acceptable, according to your font size. If your institution still thinks they should have double line spacing, they are probably wrong, and just don't understand that the world has moved on since the typewriter. Show them this paragraph and explain that they need to enter the 21st century and adapt to the features of computer typesetting. If they still insist, use the setspace package,which has commands for double line-spacing and one-and-a-half line spacing, but be prepared for some very ugly output (so warn your supervisor and extern). The space between lines is defined by the value of the length variable baselineskip multiplied by the value of the baselinestretch command. In general, don't meddle with baselineskip at all, and with baselinestretch only if you know what you are doing. (Both can, however, safely be used as reference values in commands like \vspace{\baselineskip} to leave a whole line space.) spacing white-space The value of baselineskip changes with the font size (see ) but is conventionally set to 1.2 times the current nominal font size. This is a value derived from long experience: only change it if you understand what it means and what effect it will have. Quite separately, there are some perfectly genuine and normal reasons for wanting wide line spacing, spacing double-spacing for example when typesetting a proof of a critical or variorum edition, where editors and contributors are going to want to add notes manually by writing between the lines, or where the text is going to be overprinted by something else like Braille, or in advertising or display text for special effects. Horizontal space white-space horizontal There is a horizontal equivalent to the vspace command: hspace, which works in the same way, so I can force a 1&inch; space like this\hspace*{1in}in mid-paragraph. There are also some predefined (shorter) spaces available: thinspace (⅙em), which we saw between single and double quotes in . It's also sometimes used between the full point after abbreviations and a following number, as in page references like p. 199, where a word space would look too big, and setting it solid would look too tight. enspace (½em). There is no direct equivalent predefined in for mid and thick spaces as used by metal typesetters, although it would be possible to define them. The en as a unit is often used as the width of a single digit in some fonts, as a convenience so that tables of figures are easy to line up. quad (1em). qquad (2em). Beyond this, all horizontal space within paragraphs is automatically flexible, tracking letterspacing letterspacing as this is what uses to achieve justification. Never be tempted to try and change the spacing between letters unless you have some professional training in typography. Some systems use letterspacing (incorrectly called tracking) as an aid to justification and it is almost always wrong to do so (and looks it). While it is possible to change letterspacing (with the soul package), it should only be done by a typographer, and then only very rarely, as the settings are very subtle and beyond the scope of this book. Headers and footers has built-in settings to control the page style of its default page layouts. These are implemented with the pagestyle command, which can take one of the following arguments. for a page number centered at the bottom; for nothing at all, not even a page number; for running heads based on the current chapter and section; which lets you use your own reprogrammed definitions of how markright and markboth commands, which control how chapter and section titles get into page headers. The command thispagestyle (taking the same arguments) can be used to force a specific style for the current page only. However, the easiest way is to use the fancyhdr package, which lets you redefine the left-hand, centre, and right-hand page headers and footers for both odd and even pages (twelve objects in all). These areas can contain a page number, fixed text, variable text (like the current chapter or section title, or the catch-words of a dictionary), or even a small image. They can also be used to do page backgrounds and frames, by making one of them the top corner of an invisible box which hangs text or images down over the whole page. The settings for the downloadable version of this document can be used as an example: for the whole story you have to read the documentation. \pagestyle{fancy}\fancyhead{} \renewcommand\headrulewidth{.1pt} \fancyhead[LO,RE]{\footnotesize\sffamily\lite\leftmark} \fancyhead[LE,RO]{\footnotesize\sffamily\lite\itshape \rightmark} \fancyfoot[C]{} \fancyfoot[LE,RO]{\setlength{\fboxsep}{2pt}\ovalbox% {\footnotesize\sffamily\thepage}} \fancyfoot[LO,RE]{\footnotesize\sffamily\lite\@title} \fancypagestyle{plain}{\fancyhf{} \fancyfoot[R]{\setlength{\fboxsep}{2pt}\ovalbox{% \footnotesize\sffamily\thepage}} \fancyfoot[L]{\footnotesize\sffamily\lite\@title} \renewcommand{\headrulewidth}{0pt}} This is probably more complex than most documents, but it illustrates some common requirements: Settings are prefixed by making the pagestyle fancy and setting the fancyhead to null to zap any predefined values. The thickness of the rule at the top of the page can be changed (or set to 0pt to make it disappear). The header and footer settings are specified with L, C, and R for left, centre, and right; and with O and E for Odd and Even numbered pages. In each setting, the typeface style, size, and font can be specified along with macros which implement various dynamic texts (here, the current chapter and section titles, which stores in rightmark and leftmark). The plain variant is used for chapter starts, and resets some of the parameters accordingly. Using fonts fonts in general The default typeface in is Computer Modern. This typeface was designed by Knuth for use with because it is a book face, and he designed originally for typesetting books. Because it is one of the very few book typefaces with a comprehensive set of fonts, including a full suite of mathematics, it has remained the default, rather than the Times you find in wordprocessors, because until recently the mathematical symbols for Times were a commercial product often unavailable to users of free software. fonts &metafont; fonts Computer Modern Computer Modern is based on a 19th-century book typeface from Monotype, which is why it looks a little like an old-fashioned school book. This paragraph is set in Computer Modern so you can see what it looks like. The typeface was designed using &metafont;, the font-drawing program made by Knuth to accompany systems, but it is now also available in Type 1 and TrueType formats. If you are reading this in a web browser, the above paragraph is only a low-resolution copy because browsers don't usually have the Computer Modern font available. All the rest of this document is set in &rmfont;, with &sffont; for some of the headings and &ttfont; for the fixed-width type. In addition to , there are many other &metafont; fonts which can be downloaded from , including a large collection of historical, symbol, initial, and non-Latin fonts. also comes with the Adobe 35 typefaces which are built into laser printers and other systems, and some more fonts donated by the X Consortium. Plus, of course, standard can use any of the thousands of Type 1 fonts available, and pdf can use any of the thousands of TrueType fonts as well. In the following lists, if there is a package available, its name is given in parentheses after the name of the typeface. The font-family name is shown on the right-hand side. If a non-standard font-encoding is needed, its name is shown before the font-family name. fonts TrueType fonts &metafont; fonts PostScript fonts Type 1 Latin-alphabet typefaces (&metafont;) &alphabet; &alphabet; &alphabet; &alphabet; &alphabet; &alphabet; &alphabet; &alphabet; &ie.alphabet; &alphabet; &alphabet; &uc.alphabet; &de.alphabet; If it plese any man spirituel or temporel &de.alphabet; Latin-alphabet typefaces (PostScript Type 1) from Adobe &alphabet; &alphabet; Uses Avant Garde as the sans-serif and Courier for monospace. &alphabet; &alphabet; &alphabet; Uses Helvetica as the sans-serif font and Courier for monospace. &alphabet; Uses Avant Garde as the sans-serif and Courier for monospace. &alphabet; &alphabet; Uses Helvetica as the sans-serif font and Courier for monospace. Mathematical symbols for Times are available both free and commercially. &alphabet; &alphabet; As mentioned in , the Adobe 35 fonts can be used with any printer, not just a laser printer or typesetter. The Ghostscript interpreter and the GSview viewer come with a large set of printer drivers, so you just create PostScript output and print from GSview. Incidentally, the 35 refers to the total number of fonts for the 10 typefaces, including their bold, italic, and bold-italic variants. Postscript Type 1 fonts have been the mainstay of the graphic arts industries for many years, as they allow much better definition of variance (hinting) than most other formats. However, the font format remains proprietary to Adobe, even though they have released it for public use, which means they could change it without warning. A new format called OpenType is designed to overcome this, and some versions of are already able to use OpenType fonts. Latin-alphabet fonts (PostScript Type 1) from the X Consortium &alphabet; &alphabet; &alphabet; &alphabet; &alphabet; &alphabet; Removed from recent distributions as it is not free. Non-Latin-alphabet typefaces (&metafont;) &alphabet; &alphabet; &alphabet; &alphabet; &alphabet; &uc.alphabet; &alphabet; Just to make it clear: standard uses only &metafont; and PostScript Type 1 fonts. pdf can use TrueType fonts as well. Changing the default font family fonts changing the default expects to work with three font families as defaults: fonts families Font family Code Roman (serif, with tails on the uprights), the default rm Sans-serif, with no tails on the uprights sf Monospace (fixed-width or typewriter) tt The start-up default for equates the rm default with the cmr font-family (Computer Modern Roman), sf with cmss, and tt with cmtt. If you use one of the packages listed in , it will replace the defaults of the same type: for example, \usepackage{bookman} makes the default rm font-family Bookman (pbk), but leaves the sans-serif (sf) and monospace (tt) families untouched. Equally, \usepackage{helvet} changes the default sans-serif family to Helvetica but leaves the serif (Roman) and monospace families untouched. Using both commands will change both defaults because they operate independently. However…as it is common to want to change all three defaults at the same time, some of the most common suites of typefaces are provided as packages: times changes to Times/Helvetica/Courier. pslatex same as times but uses a specially narrowed Courier to save space (normal Courier is rather inelegantly wide). This is the preferred setting if you want Times. The pslatex package is also said to be outdated by some experts because it implements rather long-windedly what can now be done in three commands. However, until these replace the current version, I recommend continuing to use pslatex when you want Times with Helvetica and narrow Courier. newcent changes to New Century Schoolbook/Helvetica/Courier. palatino changes to Palatino/Avant Garde/Courier. palatcm changes the roman to Palatino only, but with mathematics Where no package name is given in , it means the font is rarely used as a default by itself except in special cases like users' own homebrew packages. To use such a font you have to specify it manually, or make a little macro for yourself if you use it more than once. Changing the font-family temporarily fonts changing temporarily To shift to another font family on a temporary basis, use the commands fontencoding (if needed), fontfamily, and selectfont, and enclose the commands and the text in curly braces. Note that this is a different way of using curly braces to how we have used them before: it limits the effect of a change to the material inside the braces. {\fontfamily{phv}\selectfont Helvetica looks like this}: {\fontencoding{OT1}\fontfamily{bch}\selectfont Charter looks like this}. Helvetica looks like this: Charter looks like this. In this example, the fontencoding command has been used to ensure that the typeface will work even if the sentence is used in the middle of something typeset in a different encoding (like this document). Test for the observant reader: in what typeface will the colon (:) in the example be set? Grouping grouping Note carefully this use of curly braces to restrict the scope of a change rather than delimit the argument to a command. This is called grouping and it makes the effect any changes made inside the braces local, so that they do not interfere with the text following. Any changes to fonts or other values made within the curly braces cease when the closing curly brace is processed. In a normal document, of course, random typeface changes like this are rather rare. You select your typeface[s] once at the start of the document, and stick with them. Most cases where people want to do unusual typeface changes involve things like special symbols on a repetitive basis, and provides much easier programmable ways to make these changes into shorthand commands (called macros: see ). You could, for example, make a macro called product which would let you typeset product names in a distinct typeface: Andlinger, Inc., has replaced \product{Splosh} with \product{SuperSplosh}. This is one of 's most powerful features. It means that if you needed to change your product command at some later stage to use a different font, you only have to change three characters in the macro (the font-family name), and you don't need to edit your document text at all! What's more, a macro could do other things at the same time, like add an entry to an index of products. However, vastly more common are changes to type style, while staying with the same font-family. Changing font style fonts styles Within each typeface or font family there are usually several different looks to the type design. distinguishes between font family, font shape, and font series: Type style Command Example (using Computer Modern) Upright upshape* The quick brown fox jumps over the lazy d Italic itshape \font\foo=cmti10 \foo The quick brown fox jumps over the lazy dog Slanted slshape* The quick brown fox jumps over the lazy d Small Capitals scshape* The quick brown fox jumps over the Bold bfseries* The quick brown fox jumps over the lazy d Bold Extended bfseries \font\foo=cmbx10 \foo The quick brown fox jumps over the lazy Sans-serif sffamily The quick brown fox jumps over the lazy dog Monospace ttfamily The quick brown fox jumps over the laz Not all typefaces have all variants! Some only have bold and italics. Some typefaces do not have both bold and bold extended: by default uses bfseries for bold extended. These shape, series, and family commands are commutative, so you can combine a shape with a series and/or a family, without the need to use selectfont: This gives you {\bfseries\itshape\sffamily bold italic sans-serif type}, but beware This gives you bold italic sans-serif type, but beware of pushing your fonts beyond their limits unless you are a typographer. It is not normally meaningful to combine one shape or series class with another of the same class, such as trying to get slanted-italics. It's an impossibility to combine one family with another (such as a seriffed sans-serif typeface!). Slanted plus italics, for example, doesn't make sense, as italics are already slanted (although it is technically possible); and while some typefaces may well possess italic small caps, they are not in common use. Sans-serif and monospace (typewriter) are different fonts, and often different typeface families entirely. Although if you're a typographer wanting to experiment with typewriter typefaces with and without serifs, you can use &metafont; to do exactly this kind of thing. But that's way outside the scope of this document. There is an alternative syntax for the most common type shape and series commands which uses curly braces in the normal argument manner: Type style Command Example Italic \textit{text} puts text into italics Slanted \textsl{text} puts text into slanted type* Small Capitals \textsc{text} puts text into small caps Bold \textbf{text} puts text into bold type Sans-serif \textsf{text} puts text into sans-serif type Monospace \texttt{text} puts text into typewriter type If slanted is available separately from italics. You can nest these inside one another too: ...\textbf{\itshape\textsf{bold italic sans-serif type}}... Underlining isn't a font, and it is extremely rare in typography except for special purposes. If you think you need it, use the ulem package with the normalem option, and the uline command. Font sizes fonts sizes has built into its defaults a set of predefined font size steps corresponding more or less to the traditional sizes available to metal typesetters. This is deliberate, as these sizes have grown up over 500 years of printing as those which go best together for book-work, which is where originated. These sizes are also reflected in the size steps at which Computer Modern was designed. It often comes as a surprise to new users that many typefaces are not designed as a single font and just scaled up or down, but specially drawn at different sizes to make them more legible. As an example, here's 12pt Computer Modern, and {\font\cmbig=cmr5 at12pt\cmbig here's 5pt Computer Modern scaled up to 12pt}, and {\font\cmsmall=cmr17 at12pt\cmsmall here's 17pt Computer Modern scaled down to 12pt} so you can see there really is a significant difference. In general, you probably don't want to go scaling fonts too much beyond their design size because they will start to look very odd. The default sizes (and the commands that operate them) are based on the use of a 10pt font, which is the normal size for most texts. Using the larger defaults (11pt and 12pt) for the body font will use 11pt and 12pt designs, with other sizes (eg headings) resized to match. The exact sizes used are listed in the macros in the Class Option files size10.clo, size11.clo and size12.clo. 's default fonts above 10pt are in fact scaled by a factor of 1.2, as shown in the fourth column of the table below. Command Example Nominal point size Exact point size tiny The quick brown fox jumps over the lazy dog 5 5 scriptsize The quick brown fox jumps over the laz 7 7 footnotesize The quick brown fox jumps over the l 8 8 small The quick brown fox jumps over th 9 9 normalsize The quick brown fox jumps over 10 10 large The quick brown fox jumps 12 12 Large The quick brown fox ju 14 14.40 LARGE The quick brown fo 18 17.28 huge The quick brown 20 20.74 Huge The quick bro 24 24.88 While these shorthand commands relieve the beginner of having to worry about the right size for a given task, when you need a specific size there is the fontsize command: \fontsize{22}{28}\selectfont This is 22pt type 6pt leaded Leading comes from the old metal-type practice of adding a lead strip between lines to increase the spacing. The fontsize command takes two arguments: the point size and the baseline distance. The above example gives you 22pt type on a 28pt baseline (&ie; with 6pt extra space or leading between the lines). Computer Modern fonts (the default) come fixed at the named size steps shown in the table, and if you try to use an odd size in between, will pick the closest step instead. If you really need to use at arbitrary sizes there is a package type1cm which lets you override the default steps. If you use PostScript (Type 1) fonts, the step sizes do not apply and the font scaling is infinitely variable. Logical markup All this playing around with fonts is very pretty but you normally only do it for a reason, even if that reason is just to be decorative. Italics, for example, are used for many things: Cause Effect Foreign words ex officio Scientific names Ranunculus ficaria Emphasis must not Titles of documents The Companion Product names {\upshape Corel's} WordPerfect Variables in maths E=mc 2 Subtitles or headings How to get started Decoration FREE UPGRADE!!! Humans usually have no problem telling the difference between these reasons, because they can read and understand the meaning and context. Computers cannot (yet), so it has become conventional to use descriptive names which make the distinction explicit, even though the appearance may be the same. has some of these built in, like emph, which provides emphasis. This has a special feature because when the surrounding text is already italic, emphasis automatically reverts to upright type, which is the normal practice for typesetting. This has a special feature because {\itshape when the surrounding text is already italic, \emph{emphasis} automatically reverts to upright type, which is the This sensitivity to logic is programmed into the definition of emph and it's not hard to make up other commands of your own which could do the same, such as foreign or product. But why would you bother? In a short document it's probably not important, but if you're writing a long report, or a formal document like an article, a book, or a thesis, it makes writing and editing hugely easier if you can control whole groups of special effects with a single command, such as italicising, indexing, or cross-referencing to a glossary. If a format needs changing, you only have to change the definition, and every occurrence automatically follows suit. Beware of this vaine conceipt of simple men, which judge things by ther effects, and not by ther causes. (Edmund Spenser, 1633)  It's hugely more efficient to have control of the cause than the effect. It also makes it possible to find and act on groups of meanings—such as making an index of scientific names or product names (as in this document)—if they are identified with a special command. Otherwise you'd spend weeks hunting manually through every textit command to find the ones you wanted. This is the importance of automation: it can save you time and money. In we will see how to make your own simple commands like this. Colour colour fonts colour You can typeset anything in in any colour you want using the color package. First, you need to add the command \usepackage{color} to your preamble (note the US spelling of color!). This makes available a default palette of primary colours: red, green, and blue for the colour model used for emitted light (television screens), and cyan, magenta, yellow, and black for the colour model used for reflected light (printing). For the occasional word or phrase in colour, use the command textcolor with two arguments, the colour name and the text: \textcolor{red}{like this}. There is a color command as well, for use within groups: ...{\color{blue}some text in blue}... If you have the PostScript printer driver dvips installed, you also get a separate 64-colour palette of predefined color names. These represent approximately the colours in the big box of Crayola colouring pencils much favoured by artists and designers. This adds a new colour model called named, so if you want the Crayola colour RubineRed, you can use the color or textcolor commands with a preceding optional argument : \color[named]{RubineRed} \textcolor[named]{RubineRed}{some red text} As some of the named colour names are quite long, you can create a short name of your own for colours you use frequently, using the definecolor command: \definecolor{mb}{named}{MidnightBlue} The definecolor command needs three arguments: your shorthand name, the name of the colour model, and the colour specification. In the case of the named model, the last argument is one of the 64 colour names. To use these names with pdf, you need to use the option to the color package. Using the definecolor command, you can define any colour you want by giving it a name, specifying which colour model, and providing the Red-Green-Blue or Cyan-Magenta-Yellow-Black colour values expressed as decimals, separated by commas. For example, an shade given as (37,125,224) in decimal (&hash;250FE0 in hexadecimal as used on the Web) can be given as \definecolor{midblue}{rgb}{0.145,0.490,0.882} (divide each value by 255, the maximum for each of the hues in the Red-Green-Blue colour model). You can then use textcolor with your new colour name: the midblue looks like this if you're reading in colour. The color package also provides a colour version of fbox (see ) called colorbox: \colorbox{midblue}{\color{magenta}Magenta on midblue} \colorbox{midblue}{\color{magenta}Magenta on midblue}Magenta on midblue: you can see how careful you need to be with colours! Installing new fonts fonts installing Different fonts come in a variety of packagings: the three most common used with systems are PostScript fonts, TrueType fonts, and &metafont; fonts. How you install them and where they go depends on how you installed : all I can deal with here are the standard locations within the . Typefaces come supplied as one or more font outline files and a number of ancillary files: &metafont; typefaces have a number of .mf source (outline) files, possibly also some .fd (font definition) files and a .sty (style) file. The .tfm ( font metric) files are not needed, as they can be generated from the outlines. PostScript typefaces come as a pair of files: a .pfb (PostScript font binary) or .pfa (PostScript font ) outline, and an .afm (Adobe font metric) file. There may also be .inf and other files but these are not needed for use with systems. TrueType typefaces are a single .ttf file, which combines outline and metrics in one. The instructions here assume the use of the New Font Selection Scheme used in . If you are running the obsolete 2.09, upgrade it now. Installing &metafont; fonts This is the simplest installation. When you download &metafont; fonts from , you'll usually find a large number of outline files (.mf files) and maybe some other types as well (see below).
Creating a new subdirectory for a font
Create a new subdirectory named after the typeface you're installing in texmf-local/fonts/source/public/: Copy all the .mf files to this directory. Copy the .fd (Font Definition) file[s] and the .sty (style) file to your texmf/tex/latex/mfnfss directory. Run your indexer program (see ). That's it. Unlike PostScript fonts, &metafont; fonts can be used to generate the font metric file (.tfm files) automatically on-the-fly the first time the typeface is used, so there should be nothing else to install. Now you can put a usepackage command in your preamble with whatever name the .sty file was called, and read the documentation to see what commands it gives to use the font (refer to and ). If the font came without .fd or .sty files, you'll need to find someone who can make them for you (or follow the outline in , ). Pre-generated metrics (optional) Some &metafont; fonts come with pre-generated .tfm files which you can install if your system is slow at generating them itself: Create a new subdirectory within texmf-local/fonts/tfm/public/ named the same as the one you created for the .mf files above. Copy all the .tfm files into this subdirectory. Run your indexer program (see ). Pre-generated bitmaps (optional) In some rare cases, pre-generated packed bitmap fonts (.pk files) are also available from (normally your previewer and print driver creates these automatically, but you can use the pre-generated ones if you have a very slow system). If you really want to install these, it's a similar procedure to the .tfm files: Create a new subdirectory within texmf-local/fonts/pk/modeless/ named the same as the one you created for the .mf and .tfm files above. Copy all the .nnnpk files into this subdirectory (nnn is a number reflecting the dot-density of the bitmap). On Microsoft systems the files may just end in .pk and be kept in subdirectories named after the dot-density, ⪚ dpi360. Run your indexer program (see ).
Installing PostScript fonts fonts PostScript Lots of people will tell you that PostScript fonts and PostScript output are dead and that TrueType or OpenType fonts and PDF output are the way to go. While this is true for many cases, standard does not work with TrueType fonts and does not produce directly. Only pdf does that, and there are still many printers whose typesetters and platemakers use PostScript rather than . In addition, operating system support for scalable fonts is still very poor on Unix systems (including Linux), despite the advances in recent years, so in many cases it still makes sense to use 's built-in support for PostScript. Two files are needed for each font: the .afm Adobe Font Metric and the .pfb PostScript Font Binary files. You must have both for each font before you start. If you only have the near-obsolete .pfa PostScript Font ASCII files, it may be possible to generate the .pfb files using the t1binary program from the t1utils suite (see ) or the excellent PFAedit font editor (from ). There are unfortunately still some companies distributing Type 1 fonts in .pfa format (Mathematica is one reported recently). The installation method I described in earlier editions has worked perfectly for me for years, but I have updated it here to use the facilities of the updmap program (which comes with your installation). This removes the need for one of the steps I gave before, which required editing the psfonts.map file, as this is now recreated by updmap. The procedure below is not the official way (that's fontinst), but it is the basis for a script I am working on called Gutta-Percha Yes, as in rubber. , which automates the whole process. I'll repeat this: before you start, make sure you have all the .afm and .pfb files for the typeface you want. In the example below, I'm going to use a single font from an imaginary typeface called Foo, so I have foo.afm and foo.pfb files. Put the files in your temporary directory This is /tmp on Linux, and should be C:\tmp or C:\temp or even C:\Windows\temp on Microsoft Windows. Decide on the short font name to use inside <LaTeX/>. This is not the full descriptive name (⪚ Baskerville Italic Bold Extended) but an encoded font name in the format fnnsseec, devised by Karl Berry , which stores the same information in no more than eight characters for compatibility with systems which cannot handle long filenames. The letters in the format above have the following meanings (see the fontname documentation on your computer for more details): Letter Meaning Examples f foundry b=Bitstream, m=Monotype, p=Adobe nn typeface ba=Baskerville, tm=Times, pl=Palatino ss series/shape r=roman, bi=bold italic, etc. ee encoding 8a=default 8-bit ANSI, ly=Y&ers;Y's 'n'ANSI c [small]caps (this is a literal c character, used only if needed) The texmf/fontname directory in your installation of has files for several foundries giving fully-formed names like these for common fonts (⪚ ptmr8a is [Adobe] Post­Script Times Roman in an 8–bit ANSI encoding; bgslly is Bitstream Gill Sans Light in Y&ers;Y's 'n'ANSI encoding [LY1]). Confusingly, Bitstream fonts (and others from similar sources) mostly have different names from the original fonts, so what they call Humanist 521 is actually Gill Sans. Until recently, US law only allowed the names of typefaces to be copyrighted, not the font designs themselves, leading to widespread piracy. Read the documentation in to find out how to make up your own short names if the foundry and font you want is not shown in the fontname directory. In this example we'll call our mythical example typeface zork (standing for Zfonts Ordinary Bookface, because k is the letter used for Book fonts, b being already the code for bold) and we'll assume the font comes in the two files foo.afm and foo.pfb that I mentioned above. While the fontname directories have ready-made lists of these names for popular collections of typefaces, making them up requires some knowledge of typographic terms and a careful reading of the fontname documentation. Decide on your encoding This is what tripped me up the first few times until someone pointed me at Y&ers;Y's Sadly, Y&ers;Y, Inc has ceased trading and their distribution is not longer available, although there is email support at , and their encoding files continue to be used. 'n'ANSI encoding which (to me) seems to be the only one that includes the glyphs I want where I want them. The only one I still have problems with is ø, which for some weird reason isn't catered for in this encoding. fonts encoding Your mileage may vary. This encoding is referred to as LY1 within and the encoding file is in texmf/dvips/base/texnansi.enc. Encoding is needed because Adobe fonts store their characters in different places to the standard. Copy this encoding file to the temporary directory where you're doing all this stuff. If you're using the 8a or 8r encoding (or some other encoding), then copy that file instead (8a.enc, 8r.enc). Convert <filename>.afm</filename> files to <filename>.tfm</filename> The afm2tfm program is a standard utility in the bin directory of your installation. If it's not, update your installation. In a command window, type: afm2tfm foo.afm -v zorkly.vpl -p texnansi.enc \ rzorkly.tfm >zork.id (Here and elsewhere I have sometimes had to break the line to fit it on the printed page. It's actually all typed as one long line if you omit the backslash.) This creates a special raw Font Metric file (hence the special r prefix) that can use, with a list of all its properties encoded with LY1 (the .vpl or Virtual Property List file). Many people will tell you that virtual fonts are dead and that this is the wrong way to do it, but no-one has ever shown me an alternative that works, so I stick with it. Small caps (optional) If you want a small caps variant faked up (perhaps because the typeface family doesn't have a special small-caps font), repeat the medicine like this: afm2tfm foo.afm -V zorklyc.vpl -p texnansi.enc \ rzorkly.tfm >>zork.id Note the capital V option here. Yes, it does overwrite the rzorkly.tfm created in the first command. Let it. And those are two of the greater-than signs before the zork.id filename because we want to append to it, not overwrite it. Create the virtual font Turn the .vpl files into .vf and .tfm pairs. uses these to convert from Adobe's encoding to its own. vptovf zorkly.vpl zorkly.vf zorkly.tfm vptovf zorklyc.vpl zorklyc.vf zorklyc.tfm Again, the vptovf program is a standard part of your distribution. Make directories to hold the files
Making subdirectories to hold the files
Under your texmf-local directory there should be a fonts directory, and in there there should be afm, tfm, type1, and vf directories. Create them if they do not already exist. In each of these four, create a directory for the foundry, and within them create a directory for the typeface (using a human-readable typeface name, not the short Karl Berry fontname). In our example, this means: cd /usr/TeX/texmf-local/fonts mkdir -p afm/zfonts/ordinary mkdir -p tfm/zfonts/ordinary mkdir -p type1/zfonts/ordinary mkdir -p vf/zfonts/ordinary cd /tmp Or if you're lazy like me: (cd /usr/TeX/texmf-local/fonts;\ for d in afm tfm type1 vf;\ do mkdir -p $d/zfonts/ordinary;done) For Microsoft Windows users, the path before texmf-local may look something like C:\Program Files\TeXLive\, depending on how and where you have installed your system. The -p is a Unix feature: it automatically creates any missing intervening subdirectories. If your directory-making command doesn't do this, you'll have to make the intervening directories by hand first.
Copy the files to their rightful places Copy the four groups of files to the four new directories: cp *.afm /usr/TeX/texmf/fonts/afm/zfonts/ordinary/ cp *.tfm /usr/TeX/texmf/fonts/tfm/zfonts/ordinary/ cp *.pfb /usr/TeX/texmf/fonts/type1/zfonts/ordinary/ cp *.vf /usr/TeX/texmf/fonts/vf/zfonts/ordinary/ You can of course do all this with a directory window and mouse if you find it easier. Create a font map The font map is what tells dvips which file to use for which font. The configuration file for dvips is texmf/dvips/config/config.ps and it gets its entries from the program updmap which reads map files for each typeface. The configuration file for updmap is texmf-var/web2c/updmap.cfg There is another one of these at texmf/web2c/updmap.cfg, but that contains the map references for the fonts which came with your distribution of , so you should not interfere with it. , so it needs an entry for our new font, using the three-letter font family abbreviation (the first three letters of the Berry fontname (here zor): Map zor.map We also have to create this map file (zor.map) in a subdirectory of texmf-local/dvips/config/ named after the foundry, so we need to create texmf-local/dvips/config/zfonts as well. Open /usr/TeX/texmf-var/web2c/updmap.cfg in your editor. At the bottom, add the line: Map zor.map Save and close the file. The font entries in our zor.map will be on a single line each, with no line-wrapping. Each entry gives the short name of the font, the long (Adobe) name, the PostScript encoding parameters (in quotes), and then two filenames prefixed by input redirects (less-than signs): the encoding file and the PostScript outline file. First create the directory if it doesn't already exist: mkdir -p /usr/TeX/texmf-local/dvips/config/zfonts Use your editor to open (create) the file /usr/TeX/texmf-local/dvips/config/zfonts/zor.map. Insert the line: Save and close the file. You get the full font name (here, Ordinary-Blackface) from the zork.id which was created back in when we ran afm2tfm. You must get this exactly right, because it's the official full name of the font, and PostScript files using this font need to match it. Create a style file needs a style file to implement the interface to the font. Call it after the typeface or something related; in this example we'll call it foozork.sty. In it go some details of the name and date we did this, what version of it needs, and any other command necessary to operate the font, like the font encoding and whether it is to supersede the current default Roman font. Use your editor to open (create) foozork.sty in your texmf-local/tex/latex/psnfss directory. Insert the following lines: % foozork - created from foo for Zork \def\fileversion{1.0} \def\filedate{2002/12/03} \def\docdate{2002/12/03} \NeedsTeXFormat{LaTeX2e} \ProvidesPackage{foozork} [\filedate\space\fileversion\space Zfonts Ordinary PSNFSS2e package] \RequirePackage[LY1]{fontenc} \renewcommand{\rmdefault}{zor} \endinput Note the following: The first argument to ProvidesPackage  must be the same as this style file name; and that the font family is referred to as zor, being the foundry letter plus the fontname abbreviation. This acts as a prefix for any/all font variants (bold, italic, &etc;). If you are not using Y&ers;Y encoding, omit the line referring to LY1 font encoding. If this is a typewriter font, make the renewed command rmdefault into ttdefault. If it's a sans-serif font, make it sfdefault instead. Omit the command completely if you don't want the style file to supersede the current defaults but simply to make the font available. If you do this, you probably want to write a new command or two to use it, typically one for grouped use and one for argument use: \newcommand{\zorkfamily}{\fontencoding{LY1}% \fontfamily{zor}\selectfont} \newcommand{\textzork}[1]{{\zorkfamily#1}} Save and close the file. Create the Font Definition file The last file to create is the font definition (.fd) file. This is named following the pattern eeefnn.fd, using the same conventions as before, by prepending the (lowercase) encoding abbreviation to the foundry letter and fontname abbreviation, so our example would be ly1zor.fd for the LY1 encoding and the zor short font name. Use your editor to open (create) texmf-local/tex/latex/psnfss/ly1zor.fd Enter the following lines: zorkly}{} \DeclareFontShape{LY1}{zor}{k}{sc}{<-> zorklyc}{} ]]> Save and close the file. FD files typically use one DeclareFontFamily command which specifies the encoding and the short font name. Then as many pairs of DeclareFontShape commands as you converted fonts (assuming you did both normal and small caps for each font: see ; if you didn't, then only one such command per font is needed here). The arguments to the DeclareFontShape command to watch are the 3rd (weight/width), 4th (shape), and 5th (font outline name): the rest are static for each .fd file and simply identify the encoding and the font family. The codes to use are given on pages 414–15 of the and should also be in your copies of texmf/fontnames/weight.map and texmf/fontnames/width.map. The rules for combining weight and width need care: for fontname. There is no shape.map in fontname because it's not part of font file names, it's purely a creation, so here's what the same book says: Character Meaning n normal (upright) it italic sl slanted sc small caps ui upright italic ol outline Add your own for other oddities, but be consistent: I use cu for cursive (scripts), for example, and k for blackletter faces (not to be confused with k as a width for book). The default fontspec ]]> in the 5th argument in the DeclareFontShape command means that all sizes are to come from the same font outline (remember if this was a &metafont; font with different design sizes like it would be much more complex). If the face has only a few variants, you can create any other entries for bold, italic, slanted, &etc; with the relevant weight and width and shape values pointing at the relevant outline file. If you want one font to substitute for a missing one (for example italics to substitute for slanted in a typeface which has no slanted variant of its own) give the ssub (silent substitution) command in the fontspec: for example to make all references to sl (slanted) type use an existing italic font, make the 5th argument like this: ssub * zor/m/it} ]]> If you find the x-height of a font too big or too small to sort well with another font you are using, you can specify an s (scale) factor in this argument instead: this example will shrink the result to 80% of normal: s * [0.8] zorkly} ]]> Update the index and the map files Run your indexer program (see ) so that updmap can find the files it needs. Then run updmap (just type updmap). This updates the maps and runs the indexer program again automatically.
Now you can \usepackage{foozork} in your file to make it the default font. To use the font incidentally instead of as the default, you can say: This is {\zorkfamily ZORK} or \textzork{ZORK}
Installing the Type 1 Computer Modern fonts Most new distributions of use the PostScript Type 1 versions of the Computer Modern fonts. If your installation uses the &metafont; (bitmap) versions of , you may want to switch to the Type 1 version, especially if you are going to be using pdf instead of standard , because Acrobat Reader makes such a hames of displaying Type3 fonts. GSview and pdfview handle them correctly. To do this, install one of the sets of PostScript fonts. There are several available: The fonts from BlueSky Research at Basil K. Malyshev 's BaKoMa fonts at Vladimir Volovich 's CM-Super at Bogusław Jackowski 's Latin Modern at The BaKoMa fonts include the American Mathematical Society fonts for extended mathematics, but are more complex to install because they come with a special set of TFM files. The BlueSky fonts are just and AFM files, and are a drop-in replacement requiring no further changes, as they use the same TFM files as the &metafont; version. Follow the README file in the downloadable archive for installation instructions. The Latin Modern and CM-Super fonts are new and I haven't tested them but they are well spoken of. Feedback on this is very welcome. The Live and Collection distributions use Type 1 versions of Computer Modern by default. There are more details in the FAQ at  .
Programmability (macros) macros We've touched several times on the ability of to be reprogrammed. This is one of its central features, and one that still, after nearly a quarter of a century, puts it well above many other typesetting systems, even those with macro systems of their own. It's also the one that needs most foreknowledge, which is why this chapter is in this position. is in fact itself just a collection of macros—rather a big collection—written in 's internal typesetting language. These macros are little program-like sets of instructions with a name which can be used as shorthand for an operation you wish to perform more than once. Macros can be arbitrarily complex. Many of the ones used in the standard packages are several pages long, but as we will see, even short ones can very simply automate otherwise tedious chores and allow the author to concentrate on writing. Simple replacement macros In its simplest form, a macro can just be a straightforward text replacement of a phrase to avoid misspelling something each time you need it, ⪚ \newcommand{\ef}{European Foundation for the Improvement of Living and Working Conditions} Put this in your preamble, and you can then use ef in your document and it will typeset it as the full text. Remember that after a command ending in a letter you need to leave a space to avoid the next word getting gobbled up as part of the command (see ). And when you want to force a space to be printed, use a backslash followed by a space, ⪚ The \ef\ is an institution of the Commission of the European Union. As you can see from this example, the newcommand command takes two arguments: the name you want to give the new command the expansion to be performed when you use it , so there are always two sets of curly braces after newcommand. Macros using information gathered previously A more complex example is the macro maketitle which is used in almost every formal document to format the title block. In the basic document classes (book, report, and article) it performs small variations on the layout of a centred block with the title followed by the author followed by the date, as we saw in . If you inspect one of these document class files, such as texmf/tex/latex/base/report.cls you will see maketitle defined (and several variants called @maketitle for use in different circumstances). It uses the values for the title, author, and date which are assumed already to have been stored in the internal macros @title, @author, and @date by the author using the matching title, author, and date commands in the document. This use of one command to store the information in another is a common way of gathering the information from the user. The use of macros containing the @ character prevents their accidental misuse by the user: in fact to use them in your preamble we have to allow the @ sign to become a letter so it can be recognised in a command name, and remember to turn it off again afterwards (see below). \makeatletter \renewcommand{\maketitle}{% \begin{flushleft}% \sffamily {\Large\bfseries\color{red}\@title\par}% \medskip {\large\color{blue}\@author\par}% \medskip {\itshape\color{green}\@date\par}% \bigskip\hrule\vspace*{2pc}% \end{flushleft}% } \makeatother Insert this in the sample file on immediately before the \begin{document} and remove the \color{...} commands from the title, author, and date. Re-run the file through , and you should get something like this: In this redefinition of maketitle, we've done the following: Enclosed the changes in makeatletter and makeatother to allow us to use the @ sign in command names; If you move all this preamble into a style file of your own, you don't need these commands: the use of @ signs in command names is allowed in style and class files. Used renewcommand and put maketitle in curly braces after it; Opened a pair of curly braces to hold the new definition. The closing curly brace is immediately before the makeatother; Inserted a flushleft environment so the whole title block is left-aligned; Used sffamily so the whole title block is in the defined sans-serif typeface; For each of @title, @author, and @date, we have used some font variation and colour, and enclosed each one in curly braces to restrict the changes just to each command. The closing par makes sure that multiline title and authors and dates get typeset with the relevant line-spacing; Added some flexible space between the lines, and around the hrule (horizontal rule) at the end; Note the % signs after any line ending in a curly brace, to make sure no intrusive white-space find its way into the output. These aren't needed after simple commands where there is no curly brace because excess white-space gets gobbled up there anyway. Macros with arguments But macros are not limited to text expansion. They can take arguments of their own, so you can define a command to do something with specific text you give it. This makes them much more powerful and generic, as you can write a macro to do something a certain way, and then use it hundreds of times with a different value each time. We looked earlier () at making new commands to put specific classes of words into certain fonts, such as product names into italics, keywords into bold, and so on. Here's an example for a command product, which also indexes the product name and adds a trademark sign: \newcommand{\product}[1]{% \textit{#1}\texttrademark% \index{#1@\textit{#1}}% } If I now type \tmproduct{Velcro} then I get Velcro™ typeset, and if you look in the index, you'll find this page referenced under Velcro. Let's examine what this does: The macro is specified as having one argument (that's the [1] in the definition). This will be the product name you type in curly braces when you use product. Macros can have up to nine arguments. The expansion of the macro is contained in the second set of curly braces, spread over several lines (see for why). It prints the value of the first argument (that's the #1) in italics, which is conventional for product names, and adds the texttrademark command. Finally, it creates an index entry using the same value (#1), making sure that it's italicised in the index (see to remind yourself of how indexing something in a different font works). Typing this macro over several lines makes it easier for humans to read. I could just as easily have typed \newcommand{\product}[1]{\textit{#1}\index{#1@\textit{#1}}} but it wouldn't have been as clear what I was doing. One thing to notice is that to prevent unwanted spaces creeping into the output when reads the macro, I ended each line with a comment character (%). normally treats newlines as spaces when formatting (remember ), so this stops the end of line being turned into an unwanted space when the macro is used. always ignores spaces at the start of macro lines anyway, so indenting lines for readability is fine. In we mentioned the problem of frequent use of unbreakable text leading to poor justification or to hyphenation problems. A solution is to make a macro which puts the argument into an mbox with the appropriate font change, but precedes it all with a conditional linebreak which will make it more attractive to to start a new line. \newcommand{\var}[1]{\linebreak[3]\mbox{\ttfamily#1}} This only works effectively if you have a reasonably wide setting and paragraphs long enough for the differences in spacing elsewhere to get hidden. If you have to do this in narrow journal columns, you may have to adjust wording and spacing by hand occasionally. Nested macros Here's a slightly more complex example, where one macro calls another. It's common in normal text to refer to people by their forename and surname (in that order), for example Don Knuth , but to have them indexed as surname, forename. This pair of macros, person and reindex, automates that process to minimize typing and indexing. \newcommand{\person}[1]{#1\reindex #1\sentinel} \def\reindex #1 #2\sentinel{\index{#2, #1}} The digit 1 in square brackets means that person has one argument, so you put the whole name in a single set of curly braces, ⪚ \person{Don Knuth}. The first thing the macro does is output #1, which is the value of what you typed, just as it stands, so the whole name gets typeset exactly as you typed it. But then it uses a special feature of Plain macros (which use def instead of 's newcommand Don't try this at home alone, children! This one is safe enough, but you should strictly avoid def for a couple of years. Stick to newcommand for now. ): they too can have multiple arguments but you can separate them with other characters (here a space) to form a pattern which will recognise when reading the arguments. In this example (reindex) it's expecting to see a string of characters (#1) followed by a space, followed by another string of characters (#2) followed by a dummy command (sentinel). In effect this makes it a device for splitting a name into two halves on the space between them, so the two halves can be handled separately. The reindex command can now read the two halves of the name separately. The person command invokes reindex and follows it with the name you typed plus the dummy command sentinel (which is just there to signal the end of the name). Because reindex is expecting two arguments separated by a space and terminated by a sentinel, it sees Don and Knuth as two separate arguments. It can therefore output them using index in reverse order, which is exactly what we want. A book or report with a large number of personal names to print and index could make significant use of this to allow them to be typed as \person{Leslie Lamport} and printed as Leslie Lamport , but have them indexed as Lamport, Leslie with virtually no effort on the author's part at all. Other names Try to work out how to make this person feature work with names like: Blanca Maria Bartosova de Paul Patricia Maria Soria de Miguel Arnaud de la Villèsbrunne Prince Pope John Paul II Hints: the command space produces a normal space, and one way around 's requirements on spaces after command names ending with a letter is to follow such commands with an empty set of curly braces {}. Macros and environments As mentioned in , it is possible to define macros to capture text in an environment and reuse it afterwards. This avoids any features of the subsequent use affecting the formatting of the text. One example of this uses the facilities of the fancybox package, which defines a variety of framed boxes to highlight your text, and a special environment Sbox which captures your text for use in these boxes. \begin{Sbox} \begin{minipage}{3in} This text is formatted to the specifications of the minipage environment in which it occurs. Having been typeset, it is held in the Sbox until it is needed, which is after the end of the minipage, where you can (for example) align it and put it in a special framed box. \end{minipage} \end{Sbox} \begin{flushright} \shadowbox{\theSbox} \end{flushright} This text is formatted to the specifications of the minipage environment in which it occurs. Having been typeset, it is held in the Sbox until it is needed, which is after the end of the minipage, where you can (for example) centre it and put it in a special framed box. By putting the text (here in a minipage environment because we want to change the width) inside the Sbox environment, it is typeset into memory and stored in the macro theSbox. It can then be used afterwards as the argument of the shadowbox command (and in this example it has also been centred). Reprogramming <LaTeX/>'s internals 's internal macros can also be reprogrammed or even rewritten entirely, although doing this can require a considerable degree of expertise. Simple changes, however, are easily done. Recall that 's default document structure for the Report document class uses Chapters as the main unit of text, whereas in reality most reports are divided into Sections, not Chapters (). The result of this is that if you start off your report with \section{Introduction}, it will print as 0.1 Introduction which is not at all what you want. The zero is caused by it not being part of any chapter. But this numbering is controlled by macros, and you can redefine them. In this case it's a macro called \thesection which reproduces the current section number counter (see ). It's redefined afresh in each document class file, using the command renewcommand (in this case in texmf/tex/latex/base/report.cls): \renewcommand \thesection {\thechapter.\@arabic\c@section} You can see it invokes thechapter (which is defined elsewhere to reproduce the value of the chapter counter), and it then prints a dot, followed by the Arabic value of the counter called section (that \c@ notation is 's internal way of referring to counters). You can redefine this in your preamble to simply leave out the reference to chapters: \renewcommand{\thesection}{\arabic{section}} I've used the more formal method of enclosing the command being redefined in curly braces. For largely irrelevant historical reasons these braces are often omitted in 's internal code (as you may have noticed in the example earlier). And I've also used the public macro arabic to output the value of section ('s internals use a private set of control sequences containing @-signs, designed to protect them against being changed accidentally). Now the introduction to your report will start with: 1 Introduction What's important is that you don't ever need to alter the original document class file report.cls: you just copy the command you need to change into your own document preamble, and modify that instead. It will then override the default. Changing list item bullets As mentioned earlier, here's how to redefine a bullet for an itemized list, with a slight tweak: \usepackage{bbding} \renewcommand{\labelitemi}{% \raisebox{-.25ex}{\PencilRight}} Here we use the bbding package which has a large selection of dingbats or little icons, and we make the label for top-level itemized lists print a right-pointing pencil (the names for the icons are in the package documentation: see for how to get it). In this case, we are using the raisebox command within the redefinition because it turns out that the symbols in this font are positioned slightly too high for the typeface we're using. The raisebox command takes two arguments: the first is a dimension, how much to raise the object by (and a negative value means lower: there is no need for a \lowerbox command); and the second is the text you want to affect. Here, we are shifting the symbol down by ¼ex (see for a list of dimensions can use). There is a vast number of symbols available: see for a comprehensive list. Compatibility with other systems As we saw in , uses plain-text files, so they can be read and written by any standard application that can open text files. This helps preserve your information over time, as the plain-text format cannot be obsoleted or hijacked by any manufacturer or sectoral interest, and it will always be readable on any computer, from your handheld (yes, is available for some s, see ) to the biggest supercomputer.
<LaTeX/> editing and processing on the Sharp Zaurus 5500 PDA
However, is intended as the last stage of the editorial process: formatting for print or display. If you have a requirement to re-use the text in some other environment—a database perhaps, or on the Web or a or , or in Braille or voice output—then it should probably be edited, stored, and maintained in something neutral like the Extensible Markup Language, and only converted to when a typeset copy is needed. Although has many structured-document features in common with and , it can still only be processed by the and pdf programs. Because its macro features make it almost infinitely redefinable, processing it requires a program which can unravel arbitrarily complex macros, and and its siblings are the only programs which can do that effectively. Like other typesetters and formatters (Quark XPress, PageMaker, FrameMaker, Microsoft Publisher, 3B2 &etc;), is largely a one-way street leading to typeset printing or display formatting. Converting to some other format therefore means you will unavoidably lose some formatting, as has features that others systems simply don't possess, so they cannot be translated—although there are several ways to minimise this loss. Similarly, converting other formats into often means editing back the stuff the other formats omit because they only store appearances, not structure. However, there are at least two excellent systems for converting directly to HyperText Markup Language so you can publish it on the web, as we shall see in . Converting into <LaTeX/> There are several systems which will save their text in format. The best known is probably the editor (see ), which is a wordprocessor-like interface to for Windows and Unix. Both the AbiWord and Kword wordprocessors on Linux systems have a very good Save As output, so they can be used to open Microsoft Word documents and convert to . Several maths packages like the EuroMath editor, and the Mathematica and Maple analysis packages, can also save material in format. In general, most other wordprocessors and DTP systems either don't have the level of internal markup sophistication needed to create a file, or they lack a suitable filter to enable them to output what they do have. Often they are incapable of outputting any kind of structured document, because they only store what the text looks like, not why it's there or what role it fulfills. There are two ways out of this: Use the FileSave As… menu item to save the wordprocessor file as , rationalise the using Dave Raggett 's HTML Tidy, and convert the resulting Extensible HyperText Markup Language to with any of the standard tools (see below). Use a specialist conversion tool like EBT's DynaTag (supposedly available from Enigma, if you can persuade them they have a copy to sell you; or you may still be able to get it from Red Bridge Interactive in Providence, RI). It's expensive and they don't advertise it, but for bulk conversion of consistently-marked Word files into XML it beats everything else hands down. The Word files must be consistent, though, and must use named styles from a stylesheet, otherwise no system on earth is going to be able to guess what it means. There is of course a third way, suitable for large volumes only: send it off to the Pacific Rim to be retyped into XML or . There are hundreds of companies from India to Polynesia who do this at high speed and low cost with very high accuracy. It sounds crazy when the document is already in electronic form, but it's a good example of the problem of low quality of wordprocessor markup that this solution exists at all. You will have noticed that most of the solutions lead to one place: The Standard Generalized Markup Language itself is little used now for new projects, as the software support for its daughter is far greater, but there are still hundreds of large document repositories in still growing their collection by adding documents. or . As explained above and elsewhere, these formats are the only ones devised so far capable of storing sufficient information in machine-processable, publicly-accessible form to enable your document to be recreated in multiple output formats. Once your document is in , there is a large range of software available to turn it into other formats, including . Processors in any of the common / processing languages like the Document Style Semantics and Specification Language, the Extensible Stylesheet Language [Transformations], Omnimark, Metamorphosis, Balise, &etc; can easily be written to output , and this approach is extremely common. Much of this will be simplified when wordprocessors support native, arbitrary / as a standard feature, because output will become much simpler to produce. Sun's Star Office and its Open Source sister, OpenOffice, have used XML as their native file format for several years, and there is a project at the Organisation for the Advancement of Structured Information Systems for developing a common office file format based on those used by these two packages, which has been proposed to the International Organization for Standardization in Geneva as a candidate for an International Standard. WordPerfect has also had a native (and now ) editor for many years, which will work with any Document Type Definition (but not a Schema; and at the time of writing (2005) it still used a proprietary stylesheet format). Microsoft has had a half-hearted Save As…XML for a while, using an internal and formerly largely undocumented Schema (recently published at last). The Professional versions of Word and Excel in Office 11 (Office 2003 for XP) now have full support for arbitrary Schemas and a real editor, albeit with a rather primitive interface, but there is no conversion to or from Word's .doc format. Which is silly, given that Microsoft used to make one of the best Word-to- converters ever, which was bi-directional (yes, it could round-trip Word to and back to Word and back into ). But they dropped it on the floor when arrived. However, help comes in the shape of Ruggero Dambra 's WordML2, which is an stylesheet to transform an document in this internal Schema (WordML) into format. Download it from any server in /support/WordML2LaTeX. Among the conversion programs on is Ujwal Sath­yam 's rtf2latex2e, which converts Rich Text Format files (output by many wordprocessors) to . The package description says it has support for figures and tables, equations are read as figures, and it can the handle the latest versions from Microsoft Word 97/98/2000, StarOffice, and other wordprocessors. It runs on Macs, Linux, other Unix systems, and Windows. When these efforts coalesce into generalised support for arbitrary s and Schemas, it will mean a wider choice of editing interfaces, and when they achieve the ability to run conversion into from within these editors, such as is done at the moment with Emacs or XML Spy, we will have full convertability. Getting <LaTeX/> out of XML Assuming you can get your document out of its wordprocessor format into by some method, here is a very brief example of how to turn it into . You can of course buy and install a fully-fledged commercial editor with support, and run this application within it. However, this is beyond the reach of many users, so to do this unaided you just need to install three pieces of software: Java, Saxon and the DocBook 4.2 DTD (s are correct at the time of writing). None of these has a visual interface: they are run from the command-line in the same way as is possible with . As an example, let's take the above paragraph, as typed or imported into AbiWord (see ). This is stored as a single paragraph with highlighting on the product names (italics), and the names are also links to their Internet sources, just as they are in this document. This is a convenient way to store two pieces of information in the same place.
Sample paragraph in <productname>AbiWord</productname> converted to <acronym ref="XML"></acronym>
AbiWord can export in DocBook format, which is an vocabulary for describing technical (computer) documents–it's what I use for this book. AbiWord can also export , but we're going make our own version, working from the (Brownie points for the reader who can guess why I'm not just accepting the conversion output). Although AbiWord's default is to output an  book document type, we'll convert it to a article document class. Notice that AbiWord has correctly output the expected section and title markup empty, even though it's not used. Here's the output (I've changed the linebreaks to keep it within the bounds of this page size):
You can of course buy and install a fully-fledged commercial XML editor with XSLT support, and run this application within it. However, this is beyond the reach of many users, so to do this unaided you just need to install three pieces of software: Java, Saxon, and the DocBook 4.2 DTD (URIs are correct at the time of writing). None of these has a visual interface: they are run from the command-line in the same way as is possible with LATEX.
]]>
The language lets us create templates for each type of element in an document. In our example, there are only three which need handling, as we did not create chapter or section titles (DocBook requires them to be present, but they don't have to be used). para, for the paragraph[s]; ulink, for the URIs; emphasis, for the italicisation. I'm going to cheat over the superscripting and subscripting of the letters in the logo, and use my editor to replace the whole thing with the LaTeX command. In the other three cases, we already know how deals with these, so we can write our templates (see ).
<acronym ref="XSLT"></acronym> script to convert the paragraph \documentclass{article} \usepackage{url} \begin{document} \end{document} \footnote{\url{ }} \emph{ } ]]>
If you run this through Saxon, which is an processor, you can output a file which you can process and view (see ). Loading CZ hyphenation patterns: Pavel Sevecek, v3, 1995 Loading SK hyphenation patterns: Jana Chlebikova, 1992 Babel and hyphenation patterns for english, dumylang, nohyphenation, czech, slovak, german, ngerman, danish, spanish, catalan, finnish, french, ukenglish, greek, croatian, hungarian, italian, latin, mongolian, dutch, norwegian, polish, portuguese, russian, ukrainian, serbocroat, swedish, loaded. (/usr/TeX/texmf/tex/latex/base/article.cls Document Class: article 2001/04/21 v1.4e Standard LaTeX document class (/usr/TeX/texmf/tex/latex/base/size10.clo)) (/usr/TeX/texmf/tex/latex/ltxmisc/url.sty) (./para.aux) [1] (./para.aux) ) Output written on para.dvi (1 page, 1252 bytes). Transcript written on para.log. $ xdvi para & ]]>
Displaying the typeset paragraph
Writing is not hard, but requires a little learning. The output method here is text, which is 's file format ( can also output and other formats of XML). The first template matches /, which is the document root (before the book start-tag). At this stage we output the text \documentclass{article} and \usepackage{url}. The apply-templates instructions tells the processor to carry on processing, looking for more matches. comments get ignored, and any elements which don't match a template simply have their contents passed through until the next match occurs. The book template outputs the \begin{document} and the \end{document} commands, and between them to carry on processing. The para template just outputs its content, but follows it with a linebreak (using the hexadecimal character code x000A (see the chart in ). The ulink template outputs its content but follows it with a footnote using the url command to output the value of the url attribute. The emphasis template surrounds its content with \emph{ and }. This is a relatively trivial example, but it serves to show that it's not hard to output from . In fact there is a set of templates already written to produce from a DocBook file at
Converting out of <LaTeX/> This is much harder to do comprehensively. As noted earlier, the file format really requires the program itself in order to process all the packages and macros, because there is no telling what complexities authors have added themselves (what a lot of this book is about!). Many authors and editors rely on custom-designed or homebrew converters, often written in the standard shell scripting languages (Unix shells, Perl, Python, Tcl, etc). Although some of the packages presented here are also written in the same languages, they have some advantages and restrictions compared with private conversions: Conversion done with the standard utilities (eg awk, tr, sed, grep, detex, etc) can be faster for ad hoc translations, but it is easier to obtain consistency and a more sophisticated final product using 2 or 4ht—or one of the other systems available. Embedding additional non-standard control sequences in source code may make it harder to edit and maintain, and will definitely make it harder to port to another system. Both the above methods (and others) provide a fast and reasonable reliable way to get documents authored in onto the Web in an acceptable—if not optimal—format. 2 was written to solve the problem of getting -with-mathematics onto the Web, in the days before MathML and math-capable browsers. 4ht was written to turn documents into Web hypertext—mathematics or not. Conversion to <productname>Word</productname> There are several programs on to do -to-Word and similar conversions, but they do not all handles everything can throw at them, and some only handle a subset of the built-in commands of default . Two in particular, however, have a good reputation, although I haven't used either of them (I stay as far away from Word as possible): latex2rtf by Wilfried Hennings , Fernando Dorner , and Andreas Granzer translates into —the opposite of the rtf2latex2e mentioned in . can be read by most wordprocessors, and this program preserves layout and formatting for most documents using standard built-in commands. Kirill A Chikrii 's 2Word for Microsoft Windows is a converter plug-in for Word to let it open and documents. The author's company claims that virtually any existing / package can be supported by 2Word because it is customisable. One easy route into wordprocessing, however, is the reverse of the procedures suggested in the preceding section: convert to , which many wordprocessors read easily. The following sections cover two packages for this. <productname remap="latex2html"><LaTeX/>2HTML</productname> As its name suggests, 2 is a system to convert structured documents to . Its main task is to reproduce the document structure as a set of interconnected files. Despite using Perl, 2 relies very heavily on standard Unix facilities like the NetPBM graphics package and the pipe syntax. Microsoft Windows is not well suited to this kind of composite processing, although all the required facilities are available for download in various forms and should in theory allow the package to run—but reports of problems are common. The sectional structure is preserved, and navigational links are generated for the standard Next, Previous, and Up directions. Links are also used for the cross-references, citations, footnotes, ToC, and lists of figures and tables. Conversion is direct for common elements like lists, quotes, paragraph-breaks, type-styles, etc, where there is an obvious equivalent. Heavily formatted objects such as math and diagrams are converted to images. There is no support for homebrew macros. There is, however, support for arbitrary hypertext links, symbolic cross-references between evolving remote documents, conditional text, and the inclusion of raw . These are extensions to , implemented as new commands and environments. 2 outputs a directory named after the input filename, and all the output files are put in that directory, so the output is self-contained and can be uploaded to a server as it stands. <productname remap="tex4ht"><TeX/>4ht</productname> 4ht operates differently from 2: it uses the program to process the file, and handles conversion in a set of postprocessors for the common packages. It can also output to , including Text Encoding Initiative and DocBook, and the OpenOffice and WordXML formats, and it can create info format manuals. By default, documents retain the single-file structure implied by the original, but there is again a set of additional configuration directives to make use of the features of hypertext and navigation, and to split files for ease of use. Extraction from PS and PDF If you have the full version of Adobe Acrobat, you can open a file created by pdf, select and copy all the text, and paste it into Word and some other wordprocessors, and retain some common formatting of headings, paragraphs, and lists. Both solutions still require the wordprocessor text to be edited into shape, but they preserve enough of the formatting to make it worthwhile for short documents. Otherwise, use the pdftotext program to extract everything from the file as plain (paragraph-formatted) text. Last resort: strip the markup At worst, the detex program on will strip a file of all markup and leave just the raw unformatted text, which can then be re-edited. There are also programs to extract the raw text from and PostScript files.
Configuring <TeX/> search paths systems run on a huge variety of platforms, and are typically made up of a large number of rather small files. Some computer operating systems have problems with packages like this, as their built-in methods for searching for a file when needed are poor. To get around this, uses a technique borrowed from the Unix world, based on a simple hash index for each directory they need to look in. This is known as the ls-R database, from the Unix command (ls -R) which creates it. The program which does this for is actually called after this command: mktexlsr, although it may be renamed texhash or something else on your system. This is the program referred to in . However, to know where to make these indexes, and thus where to search, needs to be told about them. In a standard installation this information is in texmf/web2c/texmf.cnf. The file is similar to a Unix shell script, but the only lines of significance for the search paths are the following (this is how they appear in the default Unix installation, omitting the comments): TEXMFMAIN = /usr/TeX/texmf TEXMFLOCAL = /usr/TeX/texmf-local HOMETEXMF = $HOME/texmf TEXMF = {$HOMETEXMF,!!$TEXMFLOCAL,!!$TEXMFMAIN} SYSTEXMF = $TEXMF VARTEXFONTS = /var/lib/texmf TEXMFDBS = $TEXMF;$VARTEXFONTS As you can see, this defines where the main /&metafont; directory is, where the local one is, and where the user's personal (home) one is. It then defines the order in which they are searched, and makes this the system-wide list. A temporary directory for bitmap fonts is set up, and added to the list, defining the places in which texhash or mktexlsr creates its databases. In some installations, the local directory is set up in /usr/local/share/texmf or /usr/share/texmf.local or similar variations, so you would substitute this name for /usr/TeX/texmf-local. Under Microsoft Windows, the names will be full paths such as C:\Program Files\TeXLive\texmf. On an Apple Mac, it might be Hard Disk:TeX:texmf. If you edit plain-text configuration files with anything other than a plain-text editor (⪚ a wordprocessor), or if you edit them with a plain-text editor which has been set to word-wrap long lines, make sure you turn line-wrapping off so that any long lines are preserved in their correct format. <TeX/> Users Group membership The Users Group was founded in 1980 for educational and scientific purposes: to provide an organization for those who have an interest in typography and font design, and are users of the typesetting system invented by Donald Knuth. TUG is run by and for its members and represents the interests of users worldwide.
TUG membership benefits Members of TUG help to support and promote the use of , &metafont;, and related systems worldwide. All members receive , the journal of the Users Group, the Live software distribution (a runnable system), and the software distribution (containing most of the archive). In addition, TUG members vote in TUG elections, and receive discounts on annual meeting fees, store purchases, and TUG-sponsored courses. TUG membership (less benefits) is tax-deductible, at least in the USA. See the TUG Web site for details.
Becoming a TUG member Please see the forms and information at . You can join online, or by filling out a paper form. The NTG (Dutch) and UKTUG (United Kingdom) user groups have joint membership agreements with TUG whereby you can receive a discount for joining both user groups. To do this, please join via (the NTG membership page) or (the UKTUG page), respectively, and select the option for joint membership. Each year's membership entitles you to the software and TUGboat produced for that year (even if it is produced in a subsequent calendar year, as is currently the case with TUGboat). You can order older issues of TUGboat and memorabilia through the TUG store (). The current TUG membership fee is $65 (US) per year for individuals and $35 for students and seniors. Add $10 to the membership fee after May 31 to cover additional shipping and processing costs. The current rate for non-voting subscription memberships (for libraries, for example) is $85. The current institutional rate is $500, which includes up to seven individual memberships.
Privacy TUG uses your personal information only to mail you products, publications, notices, and (for voting members) official ballots. Also, if you give explicit agreement, we may incorporate it into a membership directory which will be made available only to TUG members. TUG neither sells its membership list nor provides it to anyone outside of its own membership.
The ASCII character set The American Standard Code for Information Interchange was invented in 1963, and after some redevelopment settled down in 1984 as standard X3.4 of American National Standards Institute. It represents the 95 basic codes for the unaccented printable characters and punctuation of the Latin alphabet, plus 33 internal control characters originally intended for the control of computers, programs, and external devices like printers and screens. Many other character sets (strictly speaking, character repertoires) have been standardised for accented Latin characters and for all other non-Latin writing systems, but these are intended for representing the symbols people use when writing text on computers. Most programs and computers use internally for all their coding, the exceptions being -based languages like , which are inherently designed to be usable with any writing system, and a few specialist systems like APL. Although the and file formats can easily be used with many other encoding systems (see the discussion of the inputenc in ), they are based on . It is therefore important to know where to find all 95 of the printable characters, as some of them are not often used in other text-formatting systems. The following table shows all 128 characters, with their decimal, octal (base-8), and hexadecimal (base-16) code numbers. The ASCII characters Oct 0 1 2 3 4 5 6 7 Hex 8 9 A B C D E F '00↑ NUL SOH STX ETX EOT ENQ ACK BEL ''0↑ '01↑ BS HT LF VT FF CR SO SI ''0↓ '02↑ DLE DC1 DC2 DC3 DC4 NAK SYN ETB ''1↑ '03↑ CAN EM SUB ESC FS GS RS US ''1↓ '04↑ ! " &hash; $ % &ers; ' ''2↑ '05↑ ( ) * + , - . / ''2↓ '06↑ 0 1 2 3 4 5 6 7 ''3↑ '07↑ 8 9 : ; &lessthan; = &greaterthan; ? ''3↓ '10↑ @ A B C D E F G ''4↑ '11↑ H I J K L M N O ''4↓ '12↑ P Q R S T U V W ''5↑ '13↑ X Y Z [ \ ] &uline; ''5↓ '14↑ ` a b c d e f g ''6↑ '15↑ h i j k l m n o ''6↓ '16↑ p q r s t u v w ''7↑ '17↑ x y z { &vbar; } ˜ DEL ''7↓
The index numbers in the first and last columns are for finding the octal (base-8) and hexadecimal (base-16) values respectively. Replace the arrow with the number or letter from the top of the column (if the arrow points up) from the bottom of the column(if the arrow points down). Example: The Escape character (ESC) is octal '033 (03 for the row, 3 for the number at the top of the column because the arrow points up) or hexadecimal "1B (1 for the row, B for the letter at the bottom of the column because the arrow points down). For the decimal value, multiply the Octal row number by eight and add the column number from the top line (that makes ESC 27).
GNU Free Documentation License Version 1.2, November 2002 PREAMBLE The purpose of this License is to make a manual, textbook, or other functional and useful document free in the sense of freedom: to assure everyone the effective freedom to copy and redistribute it, with or without modifying it, either commercially or noncommercially. Secondarily, this License preserves for the author and publisher a way to get credit for their work, while not being considered responsible for modifications made by others. This License is a kind of copyleft, which means that derivative works of the document must themselves be free in the same sense. It complements the GNU General Public License, which is a copyleft license designed for free software. We have designed this License in order to use it for manuals for free software, because free software needs free documentation: a free program should come with manuals providing the same freedoms that the software does. But this License is not limited to software manuals; it can be used for any textual work, regardless of subject matter or whether it is published as a printed book. We recommend this License principally for works whose purpose is instruction or reference. APPLICABILITY AND DEFINITIONS This License applies to any manual or other work, in any medium, that contains a notice placed by the copyright holder saying it can be distributed under the terms of this License. Such a notice grants a world-wide, royalty-free license, unlimited in duration, to use that work under the conditions stated herein. The Document, below, refers to any such manual or work. Any member of the public is a licensee, and is addressed as you. You accept the license if you copy, modify or distribute the work in a way requiring permission under copyright law. A Modified Version of the Document means any work containing the Document or a portion of it, either copied verbatim, or with modifications and/or translated into another language. A Secondary Section is a named appendix or a front-matter section of the Document that deals exclusively with the relationship of the publishers or authors of the Document to the Document's overall subject (or to related matters) and contains nothing that could fall directly within that overall subject. (Thus, if the Document is in part a textbook of mathematics, a Secondary Section may not explain any mathematics.) The relationship could be a matter of historical connection with the subject or with related matters, or of legal, commercial, philosophical, ethical or political position regarding them. The Invariant Sections are certain Secondary Sections whose titles are designated, as being those of Invariant Sections, in the notice that says that the Document is released under this License. If a section does not fit the above definition of Secondary then it is not allowed to be designated as Invariant. The Document may contain zero Invariant Sections. If the Document does not identify any Invariant Sections then there are none. The Cover Texts are certain short passages of text that are listed, as Front-Cover Texts or Back-Cover Texts, in the notice that says that the Document is released under this License. A Front-Cover Text may be at most 5 words, and a Back-Cover Text may be at most 25 words. A Transparent copy of the Document means a machine-readable copy, represented in a format whose specification is available to the general public, that is suitable for revising the document straightforwardly with generic text editors or (for images composed of pixels) generic paint programs or (for drawings) some widely available drawing editor, and that is suitable for input to text formatters or for automatic translation to a variety of formats suitable for input to text formatters. A copy made in an otherwise Transparent file format whose markup, or absence of markup, has been arranged to thwart or discourage subsequent modification by readers is not Transparent. An image format is not Transparent if used for any substantial amount of text. A copy that is not Transparent is called Opaque. Examples of suitable formats for Transparent copies include plain ASCII without markup, Texinfo input format, LaTeX input format, SGML or XML using a publicly available DTD, and standard-conforming simple , PostScript or PDF designed for human modification. Examples of transparent image formats include PNG, XCF and JPG. Opaque formats include proprietary formats that can be read and edited only by proprietary word processors, SGML or XML for which the DTD and/or processing tools are not generally available, and the machine-generated , PostScript or PDF produced by some word processors for output purposes only. The Title Page means, for a printed book, the title page itself, plus such following pages as are needed to hold, legibly, the material this License requires to appear in the title page. For works in formats which do not have any title page as such, Title Page means the text near the most prominent appearance of the work's title, preceding the beginning of the body of the text. A section Entitled XYZ means a named subunit of the Document whose title either is precisely XYZ or contains XYZ in parentheses following text that translates XYZ in another language. (Here XYZ stands for a specific section name mentioned below, such as Acknowledgements, Dedications, Endorsements, or History.) To Preserve the Title of such a section when you modify the Document means that it remains a section Entitled XYZ according to this definition. The Document may include Warranty Disclaimers next to the notice which states that this License applies to the Document. These Warranty Disclaimers are considered to be included by reference in this License, but only as regards disclaiming warranties: any other implication that these Warranty Disclaimers may have is void and has no effect on the meaning of this License. VERBATIM COPYING You may copy and distribute the Document in any medium, either commercially or noncommercially, provided that this License, the copyright notices, and the license notice saying this License applies to the Document are reproduced in all copies, and that you add no other conditions whatsoever to those of this License. You may not use technical measures to obstruct or control the reading or further copying of the copies you make or distribute. However, you may accept compensation in exchange for copies. If you distribute a large enough number of copies you must also follow the conditions in section 3. You may also lend copies, under the same conditions stated above, and you may publicly display copies. COPYING IN QUANTITY If you publish printed copies (or copies in media that commonly have printed covers) of the Document, numbering more than 100, and the Document's license notice requires Cover Texts, you must enclose the copies in covers that carry, clearly and legibly, all these Cover Texts: Front-Cover Texts on the front cover, and Back-Cover Texts on the back cover. Both covers must also clearly and legibly identify you as the publisher of these copies. The front cover must present the full title with all words of the title equally prominent and visible. You may add other material on the covers in addition. Copying with changes limited to the covers, as long as they preserve the title of the Document and satisfy these conditions, can be treated as verbatim copying in other respects. If the required texts for either cover are too voluminous to fit legibly, you should put the first ones listed (as many as fit reasonably) on the actual cover, and continue the rest onto adjacent pages. If you publish or distribute Opaque copies of the Document numbering more than 100, you must either include a machine-readable Transparent copy along with each Opaque copy, or state in or with each Opaque copy a computer-network location from which the general network-using public has access to download using public-standard network protocols a complete Transparent copy of the Document, free of added material. If you use the latter option, you must take reasonably prudent steps, when you begin distribution of Opaque copies in quantity, to ensure that this Transparent copy will remain thus accessible at the stated location until at least one year after the last time you distribute an Opaque copy (directly or through your agents or retailers) of that edition to the public. It is requested, but not required, that you contact the authors of the Document well before redistributing any large number of copies, to give them a chance to provide you with an updated version of the Document. MODIFICATIONS You may copy and distribute a Modified Version of the Document under the conditions of sections 2 and 3 above, provided that you release the Modified Version under precisely this License, with the Modified Version filling the role of the Document, thus licensing distribution and modification of the Modified Version to whoever possesses a copy of it. In addition, you must do these things in the Modified Version: Use in the Title Page (and on the covers, if any) a title distinct from that of the Document, and from those of previous versions (which should, if there were any, be listed in the History section of the Document). You may use the same title as a previous version if the original publisher of that version gives permission. List on the Title Page, as authors, one or more persons or entities responsible for authorship of the modifications in the Modified Version, together with at least five of the principal authors of the Document (all of its principal authors, if it has fewer than five), unless they release you from this requirement. State on the Title page the name of the publisher of the Modified Version, as the publisher. Preserve all the copyright notices of the Document. Add an appropriate copyright notice for your modifications adjacent to the other copyright notices. Include, immediately after the copyright notices, a license notice giving the public permission to use the Modified Version under the terms of this License, in the form shown in the Addendum below. Preserve in that license notice the full lists of Invariant Sections and required Cover Texts given in the Document's license notice. Include an unaltered copy of this License. Preserve the section Entitled History, Preserve its Title, and add to it an item stating at least the title, year, new authors, and publisher of the Modified Version as given on the Title Page. If there is no section Entitled History in the Document, create one stating the title, year, authors, and publisher of the Document as given on its Title Page, then add an item describing the Modified Version as stated in the previous sentence. Preserve the network location, if any, given in the Document for public access to a Transparent copy of the Document, and likewise the network locations given in the Document for previous versions it was based on. These may be placed in the History section. You may omit a network location for a work that was published at least four years before the Document itself, or if the original publisher of the version it refers to gives permission. For any section Entitled Acknowledgements or Dedications, Preserve the Title of the section, and preserve in the section all the substance and tone of each of the contributor acknowledgements and/or dedications given therein. Preserve all the Invariant Sections of the Document, unaltered in their text and in their titles. Section numbers or the equivalent are not considered part of the section titles. Delete any section Entitled Endorsements. Such a section may not be included in the Modified Version. Do not retitle any existing section to be Entitled Endorsements or to conflict in title with any Invariant Section. Preserve any Warranty Disclaimers. If the Modified Version includes new front-matter sections or appendices that qualify as Secondary Sections and contain no material copied from the Document, you may at your option designate some or all of these sections as invariant. To do this, add their titles to the list of Invariant Sections in the Modified Version's license notice. These titles must be distinct from any other section titles. You may add a section Entitled Endorsements, provided it contains nothing but endorsements of your Modified Version by various parties--for example, statements of peer review or that the text has been approved by an organization as the authoritative definition of a standard. You may add a passage of up to five words as a Front-Cover Text, and a passage of up to 25 words as a Back-Cover Text, to the end of the list of Cover Texts in the Modified Version. Only one passage of Front-Cover Text and one of Back-Cover Text may be added by (or through arrangements made by) any one entity. If the Document already includes a cover text for the same cover, previously added by you or by arrangement made by the same entity you are acting on behalf of, you may not add another; but you may replace the old one, on explicit permission from the previous publisher that added the old one. The author(s) and publisher(s) of the Document do not by this License give permission to use their names for publicity for or to assert or imply endorsement of any Modified Version. COMBINING DOCUMENTS You may combine the Document with other documents released under this License, under the terms defined in section 4 above for modified versions, provided that you include in the combination all of the Invariant Sections of all of the original documents, unmodified, and list them all as Invariant Sections of your combined work in its license notice, and that you preserve all their Warranty Disclaimers. The combined work need only contain one copy of this License, and multiple identical Invariant Sections may be replaced with a single copy. If there are multiple Invariant Sections with the same name but different contents, make the title of each such section unique by adding at the end of it, in parentheses, the name of the original author or publisher of that section if known, or else a unique number. Make the same adjustment to the section titles in the list of Invariant Sections in the license notice of the combined work. In the combination, you must combine any sections Entitled History in the various original documents, forming one section Entitled History; likewise combine any sections Entitled Acknowledgements, and any sections Entitled Dedications. You must delete all sections Entitled Endorsements. COLLECTIONS OF DOCUMENTS You may make a collection consisting of the Document and other documents released under this License, and replace the individual copies of this License in the various documents with a single copy that is included in the collection, provided that you follow the rules of this License for verbatim copying of each of the documents in all other respects. You may extract a single document from such a collection, and distribute it individually under this License, provided you insert a copy of this License into the extracted document, and follow this License in all other respects regarding verbatim copying of that document. AGGREGATION WITH INDEPENDENT WORKS A compilation of the Document or its derivatives with other separate and independent documents or works, in or on a volume of a storage or distribution medium, is called an aggregate if the copyright resulting from the compilation is not used to limit the legal rights of the compilation's users beyond what the individual works permit. When the Document is included an aggregate, this License does not apply to the other works in the aggregate which are not themselves derivative works of the Document. If the Cover Text requirement of section 3 is applicable to these copies of the Document, then if the Document is less than one half of the entire aggregate, the Document's Cover Texts may be placed on covers that bracket the Document within the aggregate, or the electronic equivalent of covers if the Document is in electronic form. Otherwise they must appear on printed covers that bracket the whole aggregate. TRANSLATION Translation is considered a kind of modification, so you may distribute translations of the Document under the terms of section 4. Replacing Invariant Sections with translations requires special permission from their copyright holders, but you may include translations of some or all Invariant Sections in addition to the original versions of these Invariant Sections. You may include a translation of this License, and all the license notices in the Document, and any Warranty Disclaimers, provided that you also include the original English version of this License and the original versions of those notices and disclaimers. In case of a disagreement between the translation and the original version of this License or a notice or disclaimer, the original version will prevail. If a section in the Document is Entitled Acknowledgements, Dedications, or History, the requirement (section 4) to Preserve its Title (section 1) will typically require changing the actual title. TERMINATION You may not copy, modify, sublicense, or distribute the Document except as expressly provided for under this License. Any other attempt to copy, modify, sublicense or distribute the Document is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance. FUTURE REVISIONS OF THIS LICENSE The Free Software Foundation may publish new, revised versions of the GNU Free Documentation License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. See http://www.gnu.org/copyleft/. Each version of the License is given a distinguishing version number. If the Document specifies that a particular numbered version of this License or any later version applies to it, you have the option of following the terms and conditions either of that specified version or of any later version that has been published (not as a draft) by the Free Software Foundation. If the Document does not specify a version number of this License, you may choose any version ever published (not as a draft) by the Free Software Foundation. ADDENDUM: How to use this License for your documents To use this License in a document you have written, include a copy of the License in the document and put the following copyright and license notices just after the title page: If you have Invariant Sections, Front-Cover Texts and Back-Cover Texts, replace the with…Texts. line with this:
with the Invariant Sections being LIST THEIR TITLES, with the Front-Cover Texts being LIST, and with the Back-Cover Texts being LIST.
If you have Invariant Sections without Cover Texts, or some other combination of the three, merge those two alternatives to suit the situation. If your document contains nontrivial examples of program code, we recommend releasing these examples in parallel under your choice of free software license, such as the GNU General Public License, to permit their use in free software.
References American Mathematical Society Short Math Guide for <LaTeX/> Short Math Guide AMS
Providence, RI
http://www.ams.org/tex/short-math-guide.html 2001
Berry Karl Fontname Filenames for fonts http://www.ctan.org/tex-archive/info/fontname/ Users Group
Portland, OR
June 2001
Bull RJ Accounting in Business Butterworths
London
1972 0-406-70651-4
Burnard Lou Sperberg-McQueen Michael Guidelines for the Text Encoding Initiative TEI Guidelines OUP
Oxford
1995
Davy William A System of Divinity Published by the author
Lustleigh, Devon
1806
Doob Michael University of Manitoba
Winnipeg, Manitoba, Canada
A Gentle Introduction to <TeX/> A Manual for Self-Study Gentle Intro Users Group
Portland, OR
2002 http://www.ctan.org/tex-archive/info/gentle/
Flaubert Gustave Madame Bovary
Paris
1857
Flynn Peter The HTML Handbook The HTML Handbook International Thompson Computer Press
London
1-85032-205-8 1995
Flynn Peter Understanding SGML and XML Tools SGML &ers; XML Tools Kluwer
Boston
0-7923-8169-6 1998
Fothergill John An Innkeeper's Diary Penguin
London
3rd 1929
Mittelbach Frank Goossens Michel Braams Johannes Carlisle David Rowley Chris The <LaTeX/> Companion Companion Addison-Wesley/Pearson Education
Boston, MA
2 0-201-36299-6 2004
Goossens Michel Rahtz Sebastian Mittelbach Frank The <LaTeX/> Graphics Companion Graphics Companion Addison-Wesley
Reading, MA
0-201-85469-4 1997
Goossens Michel Rahtz Sebastian Moore Ross Sutor Bob The <LaTeX/> Web Companion Web Companion Addison-Wesley
Reading, MA
0-201-43311-7 1999
Goreham Anthony Re: Installing a new font: PFM, PFB Installing a new font <ulink url="comp.text.tex" type="news"></ulink> m3r8qj42o3.fsf@micawber.queens.ox.ac.uk (all pages) 28 November 2001 Heller Robert New To <LaTeX/>…Unlearning Bad Habits Bad habits <ulink url="comp.text.tex" type="news"></ulink> MPG.18d82140d65ddc5898968c@news.earthlink.net (all pages) 11 March 2003 Jeffrey Alan McDonnell Rowland Font installation software for <TeX/> Fontinst http://www.tex.ac.uk/tex-archive/fonts/utilities/fontinst/ Users Group 30 June 1998 Knuth Donald Ervin The Art of Computer Programming Addison-Wesley
Reading, MA
2nd 1 0-201-89685-0 1980
Lamport Leslie <LaTeX/> A Document Preparation System Addison-Wesley
Reading, MA
0-201-52983-1 2nd 1994
Mac Namara Matthew La Textualisation de <citation>Madame Bovary</citation> Rodopi
Amsterdam
2003
Oetiker Tobias Partl Hubert Hyna Irene Schlegl Elisabeth The (Not So) Short Guide to <LaTeXe/> in 131 Minutes Short Guide Users Group http://www.ctan.org/tex-archive/info/lshort/ 2001 3.2 Pakin Scott University of Illinois
Urbana-Champaign
A comprehensive list of symbols in <TeX/> Symbol list Users Group http://www.ctan.org/tex-archive/info/symbols/comprehensive/ 2002
Users Group Getting Started with <TeX/>, <LaTeX/>, and friends Getting Started Users Group
Portland, OR
http://www.tug.org/begin.html November 2003
Reckdahl Keith Using imported graphics in <LaTeXe/> Imported graphics Users Group http://www.ctan.org/tex-archive/info/epslatex.pdf/ 1997 2.0 Anon Táin bó Cúailnge 55 Leabhar na h-Uidhri The Book of the Dun Cow Royal Irish Academy
Dublin
1100
Rawlings Marjorie Kinnan Varmints Scribner's Magazine 1936 Ryder John Printing for Pleasure Bodley Head
London
0-370-10443-9 1976
Flynn Peter The XML FAQ University College Cork
Cork, Ireland
http://www.ucc.ie/xml/ January 2005
Free Software Foundation The GNU Free Documentation License GNU FDL Free Software Foundation
Boston, MA
http://www.fsf.org/copyleft/fdl.html 2003/02/10 23:42:49
Beeton Barbara TUGboat Users Group
Portland, OR
0896-3207 Since 1980
Carnes Lance Berry Karl The Prac<TeX/> Journal Users Group
Portland, OR
http://www.tug.org/pracjourn/ 2004
Anderson Chris WIRED Condé Nast
San Francisco, CA
1059-1028 1993--
Knuth Donald E Larrabee Tracey Roberts Paul M Mathematical Writing Mathematical Association of America
Washington, DC
MAA Notes 14 0-88385-063-X 1989
Index The same fonts are used here as in the text of the book (see ) to distinguish between different meanings: Notation Meaning Acronyms (small caps in some typefaces) command control sequences (monospace font) term Defining instance of a specialist term (bold italics) product program or product name (italics) environment environment (sans-serif bold) package package (sans-serif; all available from ) Options to environments (sans-serif oblique) variables Variables (monospace oblique) In the online version, the entries below are all hyperlinked to their source, with subsequent multiple occurrences giving the section number or name. Page or section numbers in bold type indicate a defining instance.