From e0c6872cf40896c7be36b11dcc744620f10adf1d Mon Sep 17 00:00:00 2001 From: Norbert Preining Date: Mon, 2 Sep 2019 13:46:59 +0900 Subject: Initial commit --- support/translit/translit.txt | 1716 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 1716 insertions(+) create mode 100644 support/translit/translit.txt (limited to 'support/translit/translit.txt') diff --git a/support/translit/translit.txt b/support/translit/translit.txt new file mode 100644 index 0000000000..7ab0a09d07 --- /dev/null +++ b/support/translit/translit.txt @@ -0,0 +1,1716 @@ + + + +TRANSLIT(JKL) Version 1.03 TRANSLIT(JKL) + + + +NAME + TRANSLIT + Program to transliterate texts in different character + sets. The program converts input character codes (or + sequences of codes) to a different set of output char- + acter codes (or sequences of codes). Intended for + transliteration to/from phonetic representation of + foreign letters with Latin letters from/to special + national codes used for these letters. It supports + simple matches, character lists and flexible matches + via regular expressions. The new transliteration + schemes are easily added by creating simple transli- + teration tables. Multiple character sets are supported + for input and output. It does not yet support UNICODE, + but some day it will. + + +COPYRIGHT + Copyright (c) 1993 Jan Labanowski and JKL Enterprises, Inc. + You may distribute the Software only as a complete set of + files. You may distribute the modified Software only if you + retain the Copyright notice and you do not delete original + code, data, documentation and associated files. The + Software is copyrighted. You may not sell the software or + incorporate it in the commercial product without written + permission from Jan Labanowski or JKL Enterprises, Inc. You + are allowed to charge for media and copying if you distri- + bute the whole unaltered package. + + +SYNOPSIS + translit [ -i inpfile ][ -o outfile ][ -d ][ -t transtbl | + transtbl ] + + +OPTIONS + -i inpfile + inpfile is a name of input file to be transliterated. + If "-i" is not specified, the input is taken from stan- + dard input. + + -o outfile + outfile is an output file, where the transliterated + text is stored. If "-o" is not specified, the output + is directed to the standard output. Program will not + overwrite the existing file. If file exists, you need + to delete it first. + + -d Some information on character codes read from transli- + teration table file are sent to standard error + ("stderr"). Useful when developing new transliteration + tables. + + + +JKL Last change: 22-Jan-1997 1 + + + + + + +TRANSLIT(JKL) Version 1.03 TRANSLIT(JKL) + + + + -t transtbl + transtbl is a transliteration table file which you want + to use. The "-t" option may be omitted if the transtbl + is specified as the last parameter on the command line. + The program first tries to locate transtbl file in the + current directory, and if not found, it searches the + directory chosen at compilation/installation time in + "paths.h". If no "transtbl" is given, the default file + name specified in "paths.h" is taken. The + compile/installation time defaults in "paths.h" for the + search directory and the default file name can be + overiden by setting environment variables: TRANSP and + TRANSF, respectively (see below). + + +ENVIRONMENT VARIABLES + The default path to the directory holding transliteration + tables can be overiden by setting environment variable + TRANSP. The default name for the transliteration table can + be overiden by setting TRANSF environment variable. However, + when the transliteration file is given on the command line, + it will overide the defaults and environment setting. Here + are some examples of setting environment variables for dif- + ferent operating systems: + + UN*X System + If you are using csh (C-shell): + setenv TRANSP /home/john/translit/ + setenv TRANSF koi8-tex.rus + If you are using sh (Bourne Shell): + set TRANSP=/home/john/translit/ + export TRANSP + set TRANSF=koi8-tex.rus + export TRANSF + VAX-VMS System + TRANSP:==SYS$USER:[JOHN.TRANSLIT] + TRANSF:==KOI8-TEX.TBL + PC-DOS or MS-DOS + SET TRANSP=C:\JOHN\TRANSLIT\ + SET TRANSF=KOI8-TEX.TBL + Note that the directory path has to include concluding + slashes, \ or /. + + + +EXAMPLES + cat text.koi8 | translit koi8-tex.rus > text.tex + in UN*X is equivalent to: + + translit -t koi8-tex.rus -o text.tex -i text.koi8 + and converts file text.koi8 to file text.tex using transli- + teration specified in the file koi8-tex.rus. + + + +JKL Last change: 22-Jan-1997 2 + + + + + + +TRANSLIT(JKL) Version 1.03 TRANSLIT(JKL) + + + + translit -i text.koi8 koi8-cl.rus + displays the converted text from file text.koi8 on your ter- + minal. The conversion table is koi8-cl.rus (KOI8 --> Library + of Congress). + + translit -i text.alt -t alt-koi8.rus | translit -o + text.tex -t koi8-tex.rus + is essentially equivalent to the following two commands in + UN*X or MS-DOS: + translit -i text.alt -o junkfile -t alt-koi8.rus + translit -i junkfile -o text.tex -t koi8-ltx.rus + and converts the file in ALT character set to a LaTeX file + for printing. + + translit -i russ.txt pho-koi8.rus | translit -o + russ.tex koi8-ltx.rus + converts file russ.txt from phonetic transliteration to + LaTeX file russ.tex for printing. + + + + +TRANSLITERATION TABLES + The following transliteration files are available with the + current distribution. Consult the comments in the individual + files for details. + + koi8-tex.rus + Conversion table which changes the file in KOI8 (8 bit + character set used by RELCOM news service) to a Plain + TeX file for printing with AMS WNCYR fonts. + + koi8-ltx.rus + Conversion table which changes the file in KOI8 (8 bit + character set used by RELCOM news service) to LaTeX + file for printing with AMS WNCYR fonts. + + ltx-koi8.rus + Conversion table for the LaTeX to KOI8 conversion. Note + that it will not handle complicated cases, since LaTeX + is a program, and only TeX can convert a LaTeX source + to the characters. However, it should work OK for sim- + ple cases of text only files, and may need some editing + for complicated cases. + + k8-tavtt.rus + Converts KOI8 to Bill Tavolga cyrttf truetype font map- + ping. + + hex-text.rus + Converts hexcodes to actual codes. Some e-mail programs + convert characters with codes larger than 127 to + + + +JKL Last change: 22-Jan-1997 3 + + + + + + +TRANSLIT(JKL) Version 1.03 TRANSLIT(JKL) + + + + hexadecimal numbers like =AB, =9C, etc. This table + converts hexadecimal numbers back to codes. + + alt-gos.rus + This is a transliteration data file for converting from + ALT (Bryabrins alternativnyj variant used in many popu- + lar wordprocessors) to GOSTSCII 84 (approx. ISO-8859- + 5?) + + alt-koi8.rus + This is a transliteration data file for converting from + ALT to KOI8. KOI8 is meant to be GOST 19768-74 (as + used by RELCOM). + + gos-alt.rus + This is a transliteration data file for converting + GOSTSCII 84 (approx. ISO-8859-5?) to ALT (Bryabrins + alternativnyj variant) + + gos-koi8.rus + This is a transliteration data file for converting + GOSTSCII 84 (approx. ISO-8859-5?) to KOI8 used by REL- + COM KOI8 is meant to be GOST 19768-74 + + koi8-alt.rus + This is a transliteration data file for converting from + KOI8. KOI8 is meant to be GOST 19768-74, to ALT + (Bryabrins alternativnyj variant) + + koi8-gos.rus + This is a transliteration data file for converting from + KOI8 (Relcom). KOI8 is meant to be GOST 19768-74, to + GOSTSCII 84 (approx. ISO-8859-5) + + koi8-7.rus + This file converts from KOI8 to KOI7. + + koi7-8.rus + This file converts from KOI7 to KOI8. Before you + attempt the conversion, you might need to perform a + simple edit on your file. You MUST read the comments in + koi7-8.rus before you attempt this conversion. + + koi7nl-8.rus + This file assumes that there are only Russian letters + (no Latin) in the input file. If you have Latin + letters, and you inserted SHIFT-OUT/IN characters, use + file koi7-8.rus. + + koi8-lc.rus + This file converts KOI8 to the Library of Congress + transliteration. Some extensions are added. + + + +JKL Last change: 22-Jan-1997 4 + + + + + + +TRANSLIT(JKL) Version 1.03 TRANSLIT(JKL) + + + + koi8-php.rus + This file converts KOI8 to the Pokrovsky translitera- + tion. + + php-koi8.rus + This file converts from Pokrovsky transliteration to + KOI8. + + koi8-phg.rus + This file converts from KOI8 to GOST transliteration. + + phg-koi8.rus + This file converts from GOST transliteration to KOI8. + + pho-koi8.rus + This is a table which will convert from many "phonetic" + transliteration schemes to KOI8. It is elaborate and it + takes a lot of time to transliterate the file using + this table. Some transliterations are hopeless and + internally inconsistent (as humans...), so the results + cannot be bug free. You might want to modify the file, + if your transliteration patterns are different than + those assumed in this file. You may also want to sim- + plify this file if the phonetic transliteration you are + converting is a sound one (most are not, e.g., they use + e for je and e oborotnoye, ts for c and t-s, h for kha, + i for i-kratkoe, etc.). + + + +INTRODUCTION + If you do not intend to write your own transliteration + tables, you may skip this description and go directly to the + installation and copyright sections. However, you might want + to read this material anyhow, to better understand the traps + and complexities of transliteration. It is frequently + necessary to transliterate text, i.e., to change one set of + characters (or composite characters, phonemes, etc.) to + another set. + + On computers, the transliteration operation consists of con- + verting the input file in some character set to the output + file in another character set. + + In the simplest case, the single characters are transli- + terated, i.e, their codes are changed according to some + transliteration table. This is called remapping and, assum- + ing the one-to-one mapping, the task can be accomplished by + a simple pseudo program: + new_char_code = character_map[old_char_code]; + + + + + +JKL Last change: 22-Jan-1997 5 + + + + + + +TRANSLIT(JKL) Version 1.03 TRANSLIT(JKL) + + + + If the one-to-one correspondence does not exist (i.e., some + codes may be present in one set, but do not have correspond- + ing codes in another set), precise transliteration is not + possible. In such cases there are 3 obvious possibilities: + 1. skip characters which do not have counterparts, + 2. retain unchanged codes of these characters, + 3. convert the codes to multicharacter sequences. + In some cases, the file can contain more than one character + sets, e.g., the file can contain Latin characters (e.g. + English text) and Cyrillic characters (e.g. Russian text). + If the character codes assigned to characters in different + sets do not overlap, this is still a simple mapping problem. + This is a case with KOI8 or GOSTCII character tables for + Russian, which reserve the lower 127 codes for standard + ASCII codes (which include all Latin characters) and charac- + ters with codes above 127 for Cyrillic letters. + + If character codes overlap, there is a SHIFT-OUT/SHIFT-IN + technique in which the meaning of the character sequence is + determined by an opening code (or sequence of characters + codes). In this case, the meaning of the series of charac- + ters is determined by the SHIFT-OUT character (or sequence) + which precedes them. The SHIFT-IN character (or sequence) + following the series of characters returns the "reader" to + the default or previous status. To schemes are used: + (char_set_1)(SHIFT-IN[1])(SHIFT-OUT[2])(char_set_2)... + or + (char_set_1)(SHIFT-OUT[2])(char_set_2)(SHIFT- + OUT[1])char_set_1... + + Since computer keyboards, screens, printers, software, etc., + are by necessity language specific (the most popular being + ASCII), there is a problem of typing foreign language text + which contains letters different than standard Latin alpha- + bet. For this reason, many transliteration schemes use + several Latin letters to represent a single letter of + foreign alphabet, for example: + zh is used to represent cyrillic letter zhe, \"o may be + used to represent the o umlaut, etc. + + If there is one-to-one mapping of such sequences to another + alphabet, it is also easy to process. However, it is neces- + sary to substitute longest sequences first. For example, a + frequently used transliteration for cyrillic letters: + shch --- letter shcza 221 (decimal KOI8 code) + sh --- letter sha 219 + ch --- letter cze 222 + c --- letter tse 195 + h --- letter kha 200 + a --- letter a 193 + + + + + +JKL Last change: 22-Jan-1997 6 + + + + + + +TRANSLIT(JKL) Version 1.03 TRANSLIT(JKL) + + + + Obviously, in this case, we should proceed first with con- + verting all shch sequences to shcha letter, then two- + character sh and ch, and then single character c and h. + Generally, for the one-to-one transliteration, the longest + sequences should be precessed first, and the order of + conversion within sequences of the same length makes no + difference. For example, converting the word "shchah" to + KOI8 should proceed in a following way: + shchah --> (221)ah, (221)ah --> (221)(193)h, (221)(193)h + --> (221)(193)(200) + There is a multitude of reasons why transliteration is done. + I wrote this program having in mind the following ones: + 1) to print cyrillic text using TeX/LaTeX and cyrillic + fonts + 2) to read KOI8 encoded messages from Russia on my ASCII + terminal. + However, I was trying to make it flexible to accommodate + other uses. + + +PROGRAM OPERATION + The program converts the input file to an output file using + transliteration rules from the transliteration rule file + which you specify with option -t. Some examples of transli- + teration rule files are enclosed. Before program can be + used, the transliteration rules need to be specified. + + These are given as a file which consist of the following + parts described below: + 1) File format number (it is 1 at this moment) + 2) Delimiters used to enclose a) simple strings, b) char- + acter lists, c) regular expressions + 3) Starting sequence for output + 4) Ending sequence for output + 5) Number of input "character sets" + 6) SHIFT-OUT/SHIFT-IN sequences for each input character + set + 7) Number of output "character sets" + 8) SHIFT-OUT/SHIFT-IN sequences for each output character + set + 9) Transliteration table + + GENERAL COMMENTS + The transliteration rules file consists of comments and + data. The comments may be included in the file as: + a) line comments --- lines starting with ! or # character + (# or ! must be in the first column of a line) are + treated as comments and are not read in by the program. + b) comments following all required entries on the line. + They must be separated by at least one space from the + last data entry on the line and need not start with any + particular character. These comments cannot be used + + + +JKL Last change: 22-Jan-1997 7 + + + + + + +TRANSLIT(JKL) Version 1.03 TRANSLIT(JKL) + + + + within multiline sequences. + + The data entries consist of integer numbers and strings. + The strings may represent: + a) plain strings + b) character lists + c) regular expressions + + All strings which appear in the file, are processed through + the "string processor", which allows entering unprintable + characters as codes. The character code is specified as a + backslash "\" followed by at least 2 digit(s) (i.e., \01 + produces code=1, but \1 is passed unchanged). The following + formats are supported: + \0123 character of octal code 123 (when leading zero + present) + \123 character of decimal code 123 (when leading digit + is not zero) + \0o123 or \0O123 character of octal code 123 + \0d123 or \0D123 character of decimal code 123 + \0xA3 or \0XA3 or \0xa3 character of hexadecimal code + A3 + + The allowed digits are 0-7 for octal codes, 0-9 for decimal + codes and 0-F (and/or 0-f) for hexadecimal codes. In a + situation when code has to be followed by a digit character, + you need to enter the digit as a code. E.g., if you want + character \0xA3 followed by a letter C, you need to specify + letter C as a code (\0x43 or \103 or \0o103 or \0d67) and + type the sequence as, e.g., \0xA3\103. Character resulting + in a code 0 (zero) (e.g., \00) is special. It tells: "skip + everything what follows me in this string". It does not + make sense to use it, since you can always terminate the + sequence with a delimiter. When you use an empty string as + a matching sequence, remember that it does not match any- + thing. + + If the line with entries is too long, you can break it + between the fields. If the string is too long to fit a + line, you can break it before any nonblank character by the + \ (backslash) followed by white space (i.e., new lines, + spaces, tabs, etc.). The \ and the following white space + will be removed from the string by the string preprocessor. + However, you are not allowed to break the individual charac- + ter codes (and you probably would not do it ever for + aestetic purposes). For example: + "experi\ + mental design" + is equivalent to: + "experimental design" + while: + "experimental\ + + + +JKL Last change: 22-Jan-1997 8 + + + + + + +TRANSLIT(JKL) Version 1.03 TRANSLIT(JKL) + + + + design" + is equivalent to: + "experimentaldesign" + If you need to have \ followed by a space in your string, + you need to enter either a backslash or a space following it + as an explicit character code, for example: + "\\0o40" + will produce a \ followed by the space, while the string: + "\ " + will be empty. + + The preprocessor knows only about comments, plain charac- + ters, character codes, and continuation lines. However, some + characters and their combinations may have a special meaning + in lists and regular expressions. + + + DETAILS OF FILE STRUCTURE + + + Ad.1) File format number. This is simply a digit 1 on a line + by itself at the moment. This entry is included to allow + future extensions of the transliteration description file + without the need to modify older transliteration descrip- + tions (program will read data according to the current + file format number given in the file). + + Ad.2) String delimiters. The subsequent 3 lines specify + pairs of single character delimiters for 3 types of text + data. The line format is: + opening_character closing_character. + These are needed to mark the beginning/end and the type + of the text data. Each string (text datum) is saved + starting from the first character after opening delim- + iter, and ends at the last character before the closing + delimiter. If you need to use the closing delimiter + within a string, you need to specify it as its code + (e.g., if you are using () pair as delimiters, specify + ")" as \0x29). The opening delimiter may be the same or + different from the closing delimiter. + + a) The first line contains characters used to enclose + (bracket) a plain string. Plain strings are directly + matched to input data or directly sent to output. I + suggest to stick to " " pair for plain strings. The + ASCII code for " is \0d34 = \0x22 = \0o42 if you need + it inside the string itself. + + b) The second line contains characters to mark the begin- + ning and the end of the list. Lists are used to + translate single character codes. I suggest [ and ] + delimiters for the list (ASCII code of "]" is: \0d93 = + + + +JKL Last change: 22-Jan-1997 9 + + + + + + +TRANSLIT(JKL) Version 1.03 TRANSLIT(JKL) + + + + \0x5D = \0o135). The lists may include ranges, for + example: [a-zA-Z0-9] will include all Latin letters + (small and capital) and digits. Note that order is + important: [a-d] is equivalent to [abcd], while [d-a] + will result in an error. If you want to include "-" + (minus) in the list, you need to place it as the first + or the last character. There are only two special char- + acters on the list, the "-" described above, and the + "]" character. You need to enter the "]" as its code. + E.g., for ASCII character table [*--] is equivalent to + [*+,-], is equivalent to [\42\43\44\45]. The order of + characters in the list does not matter unless the input + list corresponds to the output list (this will be + explained later). Empty lists do not make sense. + + c) The third line of delimiter specification contains + delimiters for regular expressions and substitution + expressions. These strings are used for "flexible" + matches to the text in the input file. They are very + similar to the ones used in UN*X for searching text in + utilities like: grep, sed, vi, awk, etc., though only + a subset of full UN*X regular expression syntax is used + here. I suggest enclosing them within braces { and } + (ASCII code for } is \0d125 = \0x7D = \0o175). Actu- + ally, regular expressions can only be used for input + sequences, and for output sequences the {} are used to + enclose substitution sequences. This will be explained + below. The description of the syntax for + regular/substitution expressions is adapted from the + documentation for the regexp package of Henry Spencer, + University of Toronto --- this regular expression pack- + age was incorporated, after minute modifications, into + the program. + + + REGULAR EXPRESSION SYNTAX + A regular expression is zero or more branches, + separated by `|'. It matches anything that matches + one of the branches. The `|' simply means "or". + A branch is zero or more pieces, concatenated. It + matches a match for the first, followed by a match + for the second, etc. + A piece is an atom possibly followed by `*', `+', + or `?'. An atom followed by `*' matches a + sequence of 0 or more matches of the atom. An atom + followed by `+' matches a sequence of 1 or more + matches of the atom. An atom followed by `?' matches + zero or one occurrences of atom. + An atom is a regular expression in parentheses + (matching a match for the regular expression), a + range (see below), `.' (matching any single charac- + ter), a `\' followed by a single character (matching + + + +JKL Last change: 22-Jan-1997 10 + + + + + + +TRANSLIT(JKL) Version 1.03 TRANSLIT(JKL) + + + + that character), or a single character with no other + significance (matching that character). + A range is a sequence of characters enclosed in + `[]'. It normally matches any single character from + the sequence. If the sequence begins with `^', it + matches any single character not from the rest of the + sequence. If two characters in the sequence are + separated by `-', this is shorthand for the full list + of ASCII characters between them (e.g. `[0-9]' + matches any decimal digit). To include a literal `]' + in the sequence, make it the first character (follow- + ing a possible `^'). To include a literal `-', make it + the first or last character. The regular expression + can contains subexpressions which are enclosed in a () + pair. These subexpressions are numbered 1 to 9 and can + be nested. The numbering of subexpressions is given in + the order of their opening parentheses "(". For exam- + ple: + (111)...(22(333)222(444)222)...(555) + Note that expression 2 contains within itself expres- + sions 3 and 4. + These subexpressions can be referenced in the substitu- + tion string which is described below in the paragraph + below, or can be used to delimit atoms. + Examples: + {[\0d32\0d09]\0d10} --- will match space or tab fol- + lowed by new line + {[Tt][Ss]} --- will match TS, Ts, tS and ts + {TS|Ts|tS|ts} --- same as above + {[\0d09-\0d15 ][^hH][^uU][a-zA-Z]*[\0d09-\0d15 ]} --- + all words which do not start with hu, Hu, hU, HU. + There is a space between \0d15 and ]. + Note that specifying expressions like {.*} (i.e., + match all characters) does not make much sense, + since it would mean here: match the whole input + file. However, expressions like {A.*B} should be + acceptable, since they match a pair of A and B, and + everything in between them, e.g. for a string like: + "This is Mr. Allen and this is Mr. Brown." this + expression should match the string: "Allen and this + is Mr. B". + Remember to put a backslash "\" in front of the follow- + ing characters: .[()|?+*\ if you want their literal + meaning outside the range enclosed in []. Inside the + range they have their literal meaning. If you know the + syntax of UN*X regular expressions, please note that ^ + and $ anchors are not supported and are treated as nor- + mal characters (with the exception of ^ negation within + []). + + SUBSTITUTION EXPRESSIONS + After finding a match for a regular expression in the + + + +JKL Last change: 22-Jan-1997 11 + + + + + + +TRANSLIT(JKL) Version 1.03 TRANSLIT(JKL) + + + + input text, a substitution is made. It can be a simple + substitution where the whole matching string is + replaced by another string, or it may reuse a portion + or the whole matching string. The subexpressions (the + ones enclosed in parentheses) within the regular + expression which matched the input text can be refer- + enced in the substitution expression. Only the follow- + ing characters have special meaning within substitution + expression: + & --- will put the whole matching string. + \1 --- will put the match for the 1st subexpression + in (). + \2 --- will put the string which matched 2nd subex- + pression, etc. + \9 --- will place in a replacement string the 9th + subexpression (provided that there was 9 () pairs + in the regular expression) + + Only 9 subexpressions are allowed. All other charac- + ters and sequences within the substitution expression + will be placed in a substitution string as written. To + be able to put a single backslash there, you need to + put two of them. To be able to place the unchanged + codes of the above characters (i.e., to make them + literals), you need to precede them with a backslash + "\", i.e., to get & in the output string you need to + write it as \&. Similarly, to place literal \1, \2, + etc., you need to enter it as \\1, \\2, etc. Note that + characters .+[]()^, etc. which had a special meaning in + the regular expressions, do not have any special mean- + ing in the substitution expression and will be output + as written. + Example: + The regular expression: + {([Tt])([Ss])} and the corresponding substitution + expression {\1.\2} puts a period between adjoining + letters t and s preserving their letter case. + The expression: + {([A-Za-z]+)-[ \0x09]*([\0x0A-\0x0D]+)[ \0x09]*([A- + Za-z,.?;:"\)'`!]+)[ \0x09]} + and the substitution expression {\1\3\2} dehyphen- + ate words (when you understand this one, you are a + guru...). For example: con- (NL)cert is changed + to concert(NL), where NL stands for New Line. It + looks for one or more letters (saves them as sub- + string 1) followed by a hyphen (which may be fol- + lowed by zero or more spaces or tabs). The hyphen + must be followed by a NewLine (ASCII characters + 0A-0D hex form various new line sequences) and + saves NewLine sequence as a subexpression 2. Then + it looks for zero or more tabs and spaces (at the + beginning of the line). Then it looks for the rest + + + +JKL Last change: 22-Jan-1997 12 + + + + + + +TRANSLIT(JKL) Version 1.03 TRANSLIT(JKL) + + + + of the hyphenated word and saves it as substring 3. + The word may have punctuation attached. Then it + looks again for some spaces or tabs. The substitu- + tion expression junks all sequences which were not + within (), i.e., hyphen and spaces/tabs and inserts + only substrings but in a different order. The \1 + (word beginning) is followed by \3 (word end) and + followed by the NewLine --- \2. The {\2\1\3} would + be probably equally good, though you would need to + move the punctuation matching to the beginning of + the regular expression. + Ad.3) Starting sequence. This sequence will be sent to the + output before any text. It is enclosed in the pair of + string delimiters. I use it to output LaTeX preamble. + However, it can be empty, if not used. The (sequence) + may contain any characters, including new lines, etc. + Example: + "" # empty sequence + + Example: + "\documentstyle{article} + \input cyracc + \begin{document} + " + is right (note a new line at the end), but + "\documentstyle{article} + \input cyracc # this comment will be included! + \begin{document}" # while this will not + is wrong. + + Ad.4) Ending sequence. Similar to 1), but will be appended + at the end of the output file. + For example: + "\end{document} + " + + Ad.5) Number of input character sets. For example, in some + incarnation of KOI7, there are two character sets: Latin + and Cyrillic. Cyrillic character sequence follows SHIFT- + OUT character (CTRL-N), \0x0e, and is terminated by + SHIFT-IN character (CTRL-O), \0x0f. Another way of look- + ing at it is that Latin characters follow CTRL-O and + cyrillic ones follow CTRL-N. + + If there is only one character set on input you should + specify 0 as a number of input char sets, since the input + file obviously does not contain any SHIFT-OUT/IN + sequences. + + Ad.6) SHIFT-OUT/SHIFT-IN sequences for each input character + set. These lines appear only if you specified nonzero + number of character sets. These lines contain also + + + +JKL Last change: 22-Jan-1997 13 + + + + + + +TRANSLIT(JKL) Version 1.03 TRANSLIT(JKL) + + + + "nesting sequences", which will be explained later in + this section. You do not use "nesting sequences" fre- + quently, and let us assume for a moment that nesting data + are empty strings. The strings or regular expressions + specified here are matched with the contents of input + text. If match was found, the matching sequence is usu- + ally deleted from the input text and: + a) for SHIFT-OUT sequence: the current input character + set number is changed to the new one corresponding to + the SHIFT-OUT sequence, or + b) for SHIFT-IN sequence: the previous input character + set number is restored, (i.e., the one which preceded + the SHIFT-OUT sequence for the current set). Note + that only the SHIFT-IN sequence for the current set + is matched. The SHIFT-IN sequences for other charac- + ter sets than the current set are not matched. The + bracketing of sets is assumed perfect. If the SHIFT- + IN sequence for the current set is an empty string, + the input set number is changed when SHIFT-OUT + sequence of the new set is detected. + For each input character set, you have to specify a line + consisting of 6 strings/expressions separated by spaces: + SO-match SO-subs NEST-up NEST-down SI-match SI-subs + where: + SO-match --- the string or regular expression for the + SHIFT-OUT sequence for the current character set. If + detected, the input character set is changed to this + set. + SO-subs --- this is usually an empty string (i.e., the + input sequence matching SO-match is removed). But it + can be a replacement string or a substitution expres- + sion, which will substitute the original matching + SHIFT-OUT sequence. + NEST-up --- this string (or a regular expression) is usu- + ally an empty string). However, it can be used to count + brackets for detection of SHIFT-IN bracket, if SHIFT-IN + sequence is not unique. Its use is explained below. + NEST-down --- a counterpart of NEST-up. It is explained + later. + SI-match --- when a sequence in an input file matches the + string or regular expression given as SI-match for a + current input character set, the input character set + number is restored to the previous set. Note, that only + SI-match for a current set is matched with input char- + acters. + SI-subs --- this is usually an empty string (i.e., input + sequence which matched SI-match is removed), but if it + is not, the input characters which matched the SI-match + are replaced with the SI-subs. + + The KOI7 case described above may be specified as: + 2 # 2 input sets + + + +JKL Last change: 22-Jan-1997 14 + + + + + + +TRANSLIT(JKL) Version 1.03 TRANSLIT(JKL) + + + + "" "" "" "" "" "" # Latin(set 1) + "\016" "" "" "" "\017" "" # Cyrillic(set 2) + or + 2 # 2 sets + "\017" "" "" "" "" "" # Latin(set 1) + "\016" "" "" "" "" "" # Cyrillic(set 2) + Before the input is processed, the program is initialized + to the character set of the first set. In the above case, + it is important, since declaration: + 2 # 2 sets + "\016" "" "" "" "" "" # Cyrillic(set 1) + "\017" "" "" "" "" "" # Latin(set 2) + would be wrong and would mess up the Latin characters + preceding first Cyrillic sequence. + + The nesting sequences are used only for specific situa- + tions. I needed them to write a transliteration table + from LaTeX to KOI8. In LaTeX the { } pair is used for + grouping and appears frequently in the text. The sequence + of cyrillic characters is also a group in LaTeX. The + SHIFT-OUT sequence for Russian letters in LaTeX is (at + least in my case): "{\cyr ", and the end of the Russian + letters is marked by "}", but the "}" has to be the + bracket matching the opening "{" in "{\cyr ", not just + any bracket. For this reason, my SHIFT-OUT/IN entry was + in this case: + "{\cyr " "" "{" "}" "}" "" # Cyrillic codes + Whenever the "{\cyr " was found, the program zeroes the + counter. It adds +1 to it, when NEST-up sequence (i.e., + the "{" here) is found, and subtracts 1 from it, when the + NEST-down sequence is found (i.e., the "}"). The check- + ing for a SHIFT-IN sequence (i.e., the "}") for cyrillic + set is done only when the counter value is zero (i.e., + all pairs inside the cyrillic text are matched. In fact, + the process is more complicated than that (the counter + for an opened character set is placed on the stack), but + these are details you can find in the code itself. + What if the SHIFT-IN and SHIFT-OUT sequence is the same + character? Starting from version 1.01 the TRANSLIT will + also work in such cases. Let us assume that the SHIFT-IN + and SHIFT-OUT sequence is a single character "%" which + switches between two character sets. Also, if we want to + use it in the text, we have to double it, i.e., "%%" will + not be a SHIFT-IN/OUT sequence but will denote a literal + percent sign. We can do it in the following way: + "" "" "" "" "" "" # Latin + letters + {%([^%])} {\1} "" "" {%([^%])} {\1} # Cyrillic + codes + and later in the transliteration table (see below) we + should put a line: + 0 "%%" 0 "%" # change doubled % to + + + +JKL Last change: 22-Jan-1997 15 + + + + + + +TRANSLIT(JKL) Version 1.03 TRANSLIT(JKL) + + + + a single one + The same effect, for identical SHIFT-IN/OUT sequences, + can be accomplished with a -3 character set code and will + be described below. + + Ad.7) Number of output "character sets". This is analogous + to the input case. The characters sent to output may + belong to different sets. For example, when the character + (or the sequence) from set 2 is followed by the character + (or the sequence) from set 1, the program first sends the + SHIFT-IN sequence for set 2 (if it is not empty) and then + the SHIFT-OUT sequence for set 1 (if it is not empty). If + the output character (or sequence) is assigned to set 0, + then no SHIFT-IN/SHIFT-OUT sequences are sent to output. + If there is only one set of output characters, you should + specify 0. Note that you may have several input sets and + several output sets, though this is rare. Usually, you + have one input set and many output character sets, or + vice versa. Again, if you have only one output set, you + do not have any SHIFT-IN/SHIFT-OUT sequences, since those + are send to output only when a set number is changed. + But you are free to experiment. + + Ad.8) SHIFT-OUT/SHIFT-IN sequences for each output character + set. It is similar to the input case, however, the NEST- + in and NEST-up sequences are not used here. Again, before + any text is sent to output, the character set specified + as the first one is assumed. If SHIFT-OUT/IN sequences + are not used (i.e., you have only one output character + set), you will not have any SHIFT-OUT/SHIFT-IN data + lines. The KOI8 (single character set containing all + Latin and Russian letters) to KOI7 (the set using over- + lapping codes switched by SHIFT-OUT/IN sequences) conver- + sion could be therefore accomplished by the following + table: + 2 # 2 output sets + "" "" # Latin Letters + "\016" "\017" # Russian Letters case + + Ad.9) Transliteration table for individual character or + their sequences. It is a core of your transliteration + data. There are 4 columns in the transliteration table: + (inp_set_no) (inp_seq) (out_set_no) (out_seq) + These 4 columns are separated by spaces. The + (input_set_number) corresponds to the input character set + number as specified above for input SHIFT-OUT/SHIFT-IN + data, or zero. If zero is used (even if number of input + sets is not zero), the (input_sequence) will be always + matched, irrespectively of the current input character + set imposed by the SHIFT-OUT sequence. This is useful, + since some characters are universal (e.g., new lines, + spaces, pluses, minuses, etc.) irrespectively of the + + + +JKL Last change: 22-Jan-1997 16 + + + + + + +TRANSLIT(JKL) Version 1.03 TRANSLIT(JKL) + + + + current character set. The (input_sequence) is the + sequence of characters to be matched with characters in + the input file, and if found (within the character set + specified) it is replaced by the (output_sequence) and + sent to output (i.e., the matching is interrupted, the + (output_sequence) sent to ouput, the input file pointer + is moved to the first character after the matched + sequence and matching resumes). The (output_set_number) + specifies the output character set. When the output char- + acter set changes during transliteration, the appropriate + SHIFT-IN sequence of the previous set and the current + set's SHIFT-OUT sequence is sent to output. The + (output_set_number) may also be zero (even if number of + output sets is not zero). In this case, the current out- + put set status is not changed, and no SHIFT-IN/OUT + sequences is sent to output. Lastly, the output set code + may be -1, -2 or -3. In this case, the substitution is + performed within input string that matched but the output + sequence is not sent to the output yet. Depending on the + code, the following action is performed: + -1 --- program makes the substitution in the input + string (i.e., substitutes the matching string with + the input string in the input buffer). It does not + send the output sequence to the output, but continues + matching input sequences following the currently + matched one. + -2 --- like code -1, but matching is resumed from the + first sequence on the list. + -3 --- like code -1, but matching is resumed from the + input SHIFT-OUT/IN sequences. + E.g., if the unprocessed text in the input file is: + mental procedure was not successful since.......... + and there was a line in transliteration table: + 0 "me" -1 "you" + the input text would be changed to: + yountal procedure was not successful since.......... + and all remaining matching data would be applied to this + text, rather than original text. The -2 code backsteps + to the point where the matching of transliteration + starts. The -3 code backsteps even further, to the point + where the input SHIFT-OUT and SHIFT-IN sequences are + matched. Since the order of sequences to match is cru- + cial here, for the case of output set code -1/-2/-3 even + one-character input sequences are matched in the order + specified. BE CAREFUL HERE. You may create infinite + loops. If you use code -2/-3, be sure that the resulting + sequence after substitution with the code -2/-3, will not + match previous sequences with codes -2/-3. + The (output_sequence) is a sequence which substitutes the + corresponding (input_sequence). If (output_sequence) is + "" (i.e., empty string) then (input_sequence) is effec- + tively deleted. The (input_sequence)s are compared with + + + +JKL Last change: 22-Jan-1997 17 + + + + + + +TRANSLIT(JKL) Version 1.03 TRANSLIT(JKL) + + + + input in the order specified unless backstepping -2/-3 + code is used (the matching is done from the first + sequence again). I use the code -1 e.g., to dehyphenate + words when changing to LaTeX. Code -2 is useful if you + want to skip next comparisons, and the resulting substi- + tution string will match earlier matching expressions. I + do not see many uses for the code -3, but it can be used + to resolve "toggle" SHIFT-IN/OUT sequence, as described + in an example further below. The order for multicharac- + ter sequences is therefore important (the single charac- + ter sequences are always compared after all multicharac- + ter sequences, and can be therefore put anywhere). The + longer multicharacter sequences should be specified + before shorter ones, unless they are some "preprocessing" + steps with codes -1/-2/-3. The order may sometimes be + crucial. If you need single character sequences matched + in a specific order, enter them as regular expressions, + i.e., as {c} instead of "c". In short, the multicharac- + ter input sequences and regular expressions are matched + to input text in the order specified. For the sake of + efficiency, the single character input sequences (with + exception of output set code -1/-2/-3) and input lists + are handled as a case of remapping and are matched in the + order of character codes associated with them. If you + specify the same single input character twice for a given + input set, the program will complain. The following com- + binations of input and output sequences are allowed: + Input Sequence Output Sequence + "plain string" only "plain string" + [list] [list] or "plain string" + {regular expression} {substitution expression} or + "plain string" + When match is found, the matching sequence is removed and + substituted with an output sequence. If this results is + changing the current output character set, the appropri- + ate SHIFT-IN/SHIFT-OUT pair is sent to the output before + the transliterated output sequence. If list is used as + the input sequence, you may either use: + a) plain string as output sequence. In this case, if + current input character belongs to the input list, it + is replaced by the output string. I use it to delete + ranges of characters which do not have any correspond- + ing characters in the output set (e.g., some graphics + characters). In this case, the order of characters on + the input list is not important. + b) if the output string is also a list then it has to + contain exactly the same number of characters as the + input list. In this case, the 1st character from the + input list is replaced by the 1st character from the + output list, the 2nd one by the 2nd one, etc. There- + fore, the order of characters is important. + Theoretically, if there is one-to-one correspondence + + + +JKL Last change: 22-Jan-1997 18 + + + + + + +TRANSLIT(JKL) Version 1.03 TRANSLIT(JKL) + + + + between characters in the input set and characters in the + output set, you can make the conversion by using a single + line consisting of two lists. But it looks ugly... And is + difficult to read. And for the program, the substitution + takes the same time, if the characters are specified + separately, or when they are specified as matching lists. + If regular expression is used to match the input charac- + ters, the matching sequence may be replaced by a plain + string or a substitution string, which was described + above. + Examples: + 2 "CCCP" 0 "" + will delete all occurrences of CCCP from the input + file (but not Cccp or CCCp) for input set 2. + + 0 "\0xD1" 0 "ya" + will replace all occurrences of character of the code + \0xD1 with a two letter sequence "ya". + + 0 \0xD1 2 q + will replace all characters \0xD1 with a character "q" + and output SHIFT-IN/OUT sequence if necessary. + + 2 "q" 0 "\0xD1" + will replace letter q (if the current input set is 2) + with a code \0xD1. + + 0 "\0xD1" 2 "ya" + will replace code \0xD1 with a sequence ya (assuming + that SHIFT-OUT and SHIFT-IN sequences for output set 2 + are: {\cyr and }, respectively, you will get {\cyr + ya}). + + If a character is not specified in the transliteration + table, it will be output as is, i.e., it corresponds + to a line: + 0 "c" 0 "c" + where c is the character. If you want to delete cer- + tain characters, you need to explicitly specify this, + e.g.: + 0 [a-z] 0 "" + will delete all lower case Latin letters from the + text. + Below is an example of solving the identical SHIFT- + IN/OUT sequences problem using character set code -3 + which I promissed above. Assume, that you have 2 char- + acter sets in the input file, but switching between + them is accomplished by a "toggle" character. That is, + if the toggle character is found, you should switch to + the other set. Also, if you want to use the toggle + character in the set, you need to double it. Let also + assume that we have 2 character codes which will + + + +JKL Last change: 22-Jan-1997 19 + + + + + + +TRANSLIT(JKL) Version 1.03 TRANSLIT(JKL) + + + + never, ever appear. We can fool the translit by chang- + ing toggle character to a unique character and back- + stepping with character code -3 to check for SHIFT- + IN/OUT sequences again. Let the % sign be a toggle + character, and that we have two codes (for example + codes \254 and \255) which will never appear in our + text. The appropriate entries in the transliteration + table may look like: + 1 {%([^%])} -3 {\254\1} + 2 {%([^%])} -3 {\255\1} + 0 "%%" 0 "%" + i.e., when the single % is seen in set 1, produce + SHIFT-OUT sequence for set 2; and when a single % is + seen in set 2, produce SHIFT-IN sequence for set 1. + The appropriate input character set definitions will + be: + 2 # number of input character sets + "\255" "" "" "" "" "" + "\254" "" "" "" "" "" + However, be warned. I never tried this. If this trick + does not work, please let me know. + + Before you decide to create your own transliteration + file, please examine existing transliteration files. Do + yourself (and others) a favor --- put as many comments as + possible there. If you allow others to use your transli- + teration files, please include your name and e-mail + address and file creation date. + + + Program matches the sequences in a specific order: + 1) if NEST counter is zero, Match/substitute current set + SHIFT-IN sequence + 2) If matched, restore previous set number + 3) If matched, restore previous set nest counter + 4) Match/substitute input SHIFT-OUT sequences + 5) If matched, save current set and start new one + 6) If matched, zero nest counter for NEST sequences + 7) Match/substitute transliteration sequences + 8) If matched and code = -1 make substitution in input + buffer and continue matching the next sequence. + 9) If matched and code = -2 make substitution and goto 7) + 10) If matched and code = -3 make substitution and goto 1) + 11) Match (no substitution) NEST-up and NEST-down to input + buffer + 12) If NEST-up matched, increment counter for current set + 13) If NEST-down matched, decrement counter for current set + 14) If match in 7) send substitute sequence to output + 15) If no match in 7) (or code -1) output current input + character + 16) Advance input pointer to point at new characters + 17) If End of File, break + + + +JKL Last change: 22-Jan-1997 20 + + + + + + +TRANSLIT(JKL) Version 1.03 TRANSLIT(JKL) + + + + 18) Goto 1) + + +ASCII CHARACTER CODES + dec hx oct ch dec hx oct ch + + 0 00 000 ^@ NUL 64 40 100 @ + 1 01 001 ^A SOH 65 41 101 A + 2 02 002 ^B STX 66 42 102 B + 3 03 003 ^C ETX 67 43 103 C + 4 04 004 ^D EOT 68 44 104 D + 5 05 005 ^E ENQ 69 45 105 E + 6 06 006 ^F ACK 70 46 106 F + 7 07 007 ^G BEL 71 47 107 G + 8 08 010 ^H BS 72 48 110 H + 9 09 011 ^I HT 73 49 111 I + 10 0a 012 ^J LF 74 4a 112 J + 11 0b 013 ^K VT 75 4b 113 K + 12 0c 014 ^L FF 76 4c 114 L + 13 0d 015 ^M CR 77 4d 115 M + 14 0e 016 ^N SO 78 4e 116 N + 15 0f 017 ^O SI 79 4f 117 O + 16 10 020 ^P DLE 80 50 120 P + 17 11 021 ^Q DC1 81 51 121 Q + 18 12 022 ^R DC2 82 52 122 R + 19 13 023 ^S DC3 83 53 123 S + 20 14 024 ^T DC4 84 54 124 T + 21 15 025 ^U NAK 85 55 125 U + 22 16 026 ^V SYN 86 56 126 V + 23 17 027 ^W ETB 87 57 127 W + 24 18 030 ^X CAN 88 58 130 X + 25 19 031 ^Y EM 89 59 131 Y + 26 1a 032 ^Z SUB 90 5a 132 Z + 27 1b 033 ^[ ESC 91 5b 133 [ + 28 1c 034 ^\ FS 92 5c 134 \ + 29 1d 035 ^] GS 93 5d 135 ] + 30 1e 036 ^^ RS 94 5e 136 ^ + 31 1f 037 ^_ US 95 5f 137 _ + 32 20 040 SP 96 60 140 ` + 33 21 041 ! 97 61 141 a + 34 22 042 " 98 62 142 b + 35 23 043 # 99 63 143 c + 36 24 044 $ 100 64 144 d + 37 25 045 % 101 65 145 e + 38 26 046 & 102 66 146 f + 39 27 047 ' 103 67 147 g + 40 28 050 ( 104 68 150 h + 41 29 051 ) 105 69 151 i + 42 2a 052 * 106 6a 152 j + 43 2b 053 + 107 6b 153 k + 44 2c 054 , 108 6c 154 l + 45 2d 055 - 109 6d 155 m + + + +JKL Last change: 22-Jan-1997 21 + + + + + + +TRANSLIT(JKL) Version 1.03 TRANSLIT(JKL) + + + + 46 2e 056 . 110 6e 156 n + 47 2f 057 / 111 6f 157 o + 48 30 060 0 112 70 160 p + 49 31 061 1 113 71 161 q + 50 32 062 2 114 72 162 r + 51 33 063 3 115 73 163 s + 52 34 064 4 116 74 164 t + 53 35 065 5 117 75 165 u + 54 36 066 6 118 76 166 v + 55 37 067 7 119 77 167 w + 56 38 070 8 120 78 170 x + 57 39 071 9 121 79 171 y + 58 3a 072 : 122 7a 172 z + 59 3b 073 ; 123 7b 173 { + 60 3c 074 < 124 7c 174 | + 61 3d 075 = 125 7d 175 } + 62 3e 076 > 126 7e 176 ~ + 63 3f 077 ? 127 7f 177 DEL + + + +CONVERSION: DECIMAL<-->OCTAL<-->HEX. + 000 000 00 064 100 40 128 200 80 192 300 C0 + 001 001 01 065 101 41 129 201 81 193 301 C1 + 002 002 02 066 102 42 130 202 82 194 302 C2 + 003 003 03 067 103 43 131 203 83 195 303 C3 + 004 004 04 068 104 44 132 204 84 196 304 C4 + 005 005 05 069 105 45 133 205 85 197 305 C5 + 006 006 06 070 106 46 134 206 86 198 306 C6 + 007 007 07 071 107 47 135 207 87 199 307 C7 + 008 010 08 072 110 48 136 210 88 200 310 C8 + 009 011 09 073 111 49 137 211 89 201 311 C9 + 010 012 0A 074 112 4A 138 212 8A 202 312 CA + 011 013 0B 075 113 4B 139 213 8B 203 313 CB + 012 014 0C 076 114 4C 140 214 8C 204 314 CC + 013 015 0D 077 115 4D 141 215 8D 205 315 CD + 014 016 0E 078 116 4E 142 216 8E 206 316 CE + 015 017 0F 079 117 4F 143 217 8F 207 317 CF + 016 020 10 080 120 50 144 220 90 208 320 D0 + 017 021 11 081 121 51 145 221 91 209 321 D1 + 018 022 12 082 122 52 146 222 92 210 322 D2 + 019 023 13 083 123 53 147 223 93 211 323 D3 + 020 024 14 084 124 54 148 224 94 212 324 D4 + 021 025 15 085 125 55 149 225 95 213 325 D5 + 022 026 16 086 126 56 150 226 96 214 326 D6 + 023 027 17 087 127 57 151 227 97 215 327 D7 + 024 030 18 088 130 58 152 230 98 216 330 D8 + 025 031 19 089 131 59 153 231 99 217 331 D9 + 026 032 1A 090 132 5A 154 232 9A 218 332 DA + 027 033 1B 091 133 5B 155 233 9B 219 333 DB + 028 034 1C 092 134 5C 156 234 9C 220 334 DC + 029 035 1D 093 135 5D 157 235 9D 221 335 DD + + + +JKL Last change: 22-Jan-1997 22 + + + + + + +TRANSLIT(JKL) Version 1.03 TRANSLIT(JKL) + + + + 030 036 1E 094 136 5E 158 236 9E 222 336 DE + 031 037 1F 095 137 5F 159 237 9F 223 337 DF + 032 040 20 096 140 60 160 240 A0 224 340 E0 + 033 041 21 097 141 61 161 241 A1 225 341 E1 + 034 042 22 098 142 62 162 242 A2 226 342 E2 + 035 043 23 099 143 63 163 243 A3 227 343 E3 + 036 044 24 100 144 64 164 244 A4 228 344 E4 + 037 045 25 101 145 65 165 245 A5 229 345 E5 + 038 046 26 102 146 66 166 246 A6 230 346 E6 + 039 047 27 103 147 67 167 247 A7 231 347 E7 + 040 050 28 104 150 68 168 250 A8 232 350 E8 + 041 051 29 105 151 69 169 251 A9 233 351 E9 + 042 052 2A 106 152 6A 170 252 AA 234 352 EA + 043 053 2B 107 153 6B 171 253 AB 235 353 EB + 044 054 2C 108 154 6C 172 254 AC 236 354 EC + 045 055 2D 109 155 6D 173 255 AD 237 355 ED + 046 056 2E 110 156 6E 174 256 AE 238 356 EE + 047 057 2F 111 157 6F 175 257 AF 239 357 EF + 048 060 30 112 160 70 176 260 B0 240 360 F0 + 049 061 31 113 161 71 177 261 B1 241 361 F1 + 050 062 32 114 162 72 178 262 B2 242 362 F2 + 051 063 33 115 163 73 179 263 B3 243 363 F3 + 052 064 34 116 164 74 180 264 B4 244 364 F4 + 053 065 35 117 165 75 181 265 B5 245 365 F5 + 054 066 36 118 166 76 182 266 B6 246 366 F6 + 055 067 37 119 167 77 183 267 B7 247 367 F7 + 056 070 38 120 170 78 184 270 B8 248 370 F8 + 057 071 39 121 171 79 185 271 B9 249 371 F9 + 058 072 3A 122 172 7A 186 272 BA 250 372 FA + 059 073 3B 123 173 7B 187 273 BB 251 373 FB + 060 074 3C 124 174 7C 188 274 BC 252 374 FC + 061 075 3D 125 175 7D 189 275 BD 253 375 FD + 062 076 3E 126 176 7E 190 276 BE 254 376 FE + 063 077 3F 127 177 7F 191 277 BF 255 377 FF + + + +INSTALLATION + Program is given in a source form. It was tried under UN*X, + VMS and MS-DOS systems and ran. The file readme.doc contains + the details on how to obtain the whole package. You can + retrieve this file from anonymous ftp on kekule.osc.edu in + the directory /pub/russian/translit. You can also obtain it + via e-mail by sending a message: + get translit/readme.doc from russian + to OSCPOST@osc.edu or OSCPOST@OHSTPY.BITNET. + + The source of the program consists of several files: + + paths.h + must be edited before compilation. It contains its own + comments what to do. The defines in this file relate to + + + +JKL Last change: 22-Jan-1997 23 + + + + + + +TRANSLIT(JKL) Version 1.03 TRANSLIT(JKL) + + + + the operating system you are using and the default path + for searching transliteration table. + + translit.c + It contains the main program. This was intended to be + a portable code. + + reg_exp.h + the include file for regular expression matching + library of Henry Spencer from the University of + Toronto. This regular expression package was posted to + comp.sources.misc (volume 3). Also 4 patches were + posted (in volumes: 3, 4, 4, 10). I applied the patches + to the original code and made small modifications to + the code, which are marked in the source code. + + reg_exp.c + the regular expression library for compilation and + matching of regular expressions. + + reg_sub.c + the regular expression substitution routine. + + + Before you compile this program you have to edit paths.h. + Read comments in the file. During compilation, all source + code should reside in the current directory. + Then you may compile the program under UN*X as (for exam- + ple): + cc -o translit translit.c reg_exp.c reg_sub.c + and copy the program translit to some standard directory + which is in users' path (for example: /usr/local/bin). Then + you need to copy transliteration tables to the directory + which you have chosen in paths.h. If you get errors, then + it is not OK. Please, report them to the author (with all + the gory details: error message, line number, machine, + operating system, etc.). + + Under VMS (VAXes) you need to compile it as: + cc translit + cc reg_exp + cc reg_sub + link translit+reg_exp+reg_sub,sys$library:vaxcrtl/lib + and before you can use the program, you need to type (or + better put into your LOGIN.COM file) a line: + translit == "$SYS$USER:[ME.TRA]TRANSLIT.EXE" + or whatever is the full path to the translit executable + image which you created with LINK. Note the quotes and the $ + sign in front of program path. + + On an IBM-PC I used MicroSoft C 5.1 as: + cl /FeTRANSLIT /AL /FPc /W1 /F 5000 /Ox /Gs translit.c + + + +JKL Last change: 22-Jan-1997 24 + + + + + + +TRANSLIT(JKL) Version 1.03 TRANSLIT(JKL) + + + + reg_exp.c reg_sub.c + + + +RULES, CONDITIONS AND AUTHOR'S WHISHES + You can distribute this code and associated files under + these conditions: + 1) You will distribute all files (even if you think that + they are garbage). You may get the complete set from + anonymous ftp at kekule.osc.edu in + /pub/russian/translit. You can also get the program and + associated files via e-mail. To get the instructions for + e-mail distribution send a line: + send translit/readme.doc from russian + to OSCPOST@osc.edu or OSCPOST@OHSTPY.BITNET. You are + not allowed to distribute the incomplete distribution. + The following files should be present in the distribu- + tion: + alt-gos.rus - ALT to GOSTCII table + alt-koi8.rus - ALT to KOI8 table + example.alt.uu - uuencoded example in ALT + example.ko8.uu - uuencoded example in KOI8 + example.pho - phonetic transliteration example + example.tex - LaTeX example + gos-alt.rus - GOSTCII to ALT table + gos-koi8.rus - GOSTCII to KOI8 table + koi7-8.rus - KOI7 to KOI8 table + koi7nl-8.rus - KOI7 (no Latin) to KOI8 table + koi8-7.rus - KOI8 to KOI7 table + koi8-alt.rus - KOI8 to ALT table + koi8-gos.rus - KOI8 to GOSTCII table + koi8-lc.rus - KOI8 to Library of Congress table + koi8-phg.rus - KOI8 to GOST transliteration + koi8-php.rus - KOI8 to Pokrovsky transliteration + koi8-ltx.rus - KOI8 to LaTeX conversion + koi8-tex.rus - KOI8 to Plain TeX conversion + order.txt - Order form for ordering the program + paths.h - Include file for translit.c + phg-koi8.rus - GOST transliteration to KOI8 + pho-8sim.rus - Simple phonetic to KOI8 + pho-koi8.rus - Various phonetic to KOI8 + php-koi8.rus - Pokrovsky to KOI8 + readme.doc - short description of the files + reg_exp.c - regular expression code by Henry Spencer + reg_exp.h - include for reg_exp.c and reg_sub.c + reg_sub.c - regular expression code by H. Spencer + ltx-koi8.rus - LaTeX to KOI8 + translit.c - TRANSLIT main program + translit.ps - TRANSLIT manual in PostScript + translit.1 - TRANSLIT manual in *roff + translit.txt - Plain ASCII TRANSLIT manual + + + + +JKL Last change: 22-Jan-1997 25 + + + + + + +TRANSLIT(JKL) Version 1.03 TRANSLIT(JKL) + + + + 2) You may expand/change the files and the program and + distribute modified files, provided that you do not + delete anything (you can always comment the unnecessary + portions out) and clearly mark your changes. Please send + the copy of the modified version to the author, though + you are not required to do so. I will give you all the + credit for your enhancements. I simply wish that there + is a single point of distribution for this code, so it + is maintained to some extent. If you create additional + transliteration definition files, please, send them to + the author if you may. I will add them to the program + distribution. I want to fix bugs and expand/optimize + this code, but I need your help. I need your transli- + teration files for languages which I do not know or do + not use currently. Your suggestions for improving docu- + mentation are most welcome (I am not a native English + speaker). + 3) You will not charge money for the program and/or asso- + ciated files, except for media and copying costs. If you + want to sell it, contact the author first. Bear in mind + that the regular expression package by Henry Spencer has + some copyright restrictions. But there are other regu- + lar expression packages which do not have these restric- + tions (which are not violated by this offering). + 4) I will gladly help you with advice on compiling this + software and try to fix bugs when time allows. However, + if you want a ready to run executable, you need to order + it for a very nominal fee from JKL ENTERPRISES, INC. as + described in the file order.txt which must be a part of + a complete distribution. + + +AUTHOR + Jan Labanowski, P.O. Box 21821, Columbus, OH 43221-0821, + USA. E-mail: jkl@osc.edu, JKL@OHSTPY.BITNET. + + + + + + + + + + + + + + + + + + + + +JKL Last change: 22-Jan-1997 26 + + + -- cgit v1.2.3