From e0c6872cf40896c7be36b11dcc744620f10adf1d Mon Sep 17 00:00:00 2001 From: Norbert Preining Date: Mon, 2 Sep 2019 13:46:59 +0900 Subject: Initial commit --- macros/latex/contrib/varindex/README | 11 + macros/latex/contrib/varindex/varindex.dtx | 5369 ++++++++++++++++++++++++++++ macros/latex/contrib/varindex/varindex.ins | 21 + macros/latex/contrib/varindex/varindex.pdf | Bin 0 -> 240733 bytes 4 files changed, 5401 insertions(+) create mode 100644 macros/latex/contrib/varindex/README create mode 100644 macros/latex/contrib/varindex/varindex.dtx create mode 100644 macros/latex/contrib/varindex/varindex.ins create mode 100644 macros/latex/contrib/varindex/varindex.pdf (limited to 'macros/latex/contrib/varindex') diff --git a/macros/latex/contrib/varindex/README b/macros/latex/contrib/varindex/README new file mode 100644 index 0000000000..c9335ca349 --- /dev/null +++ b/macros/latex/contrib/varindex/README @@ -0,0 +1,11 @@ +varindex: +This LaTeX package provides a luxury front-end for the \index command. +For example, it allows to generate multiple \index entries in +almost any form by a single command. Extremely customizable. +Works with all versions of LaTeX and probably most other TeX formats, too. +This package requires the toolbox package at least in version 3.1. + +Author: M. V\"ath martin@mvath.de + +The package may be distributed and/or modified under the conditions of +the LaTeX Project Public License (version 1.3c or later). diff --git a/macros/latex/contrib/varindex/varindex.dtx b/macros/latex/contrib/varindex/varindex.dtx new file mode 100644 index 0000000000..f4714ea472 --- /dev/null +++ b/macros/latex/contrib/varindex/varindex.dtx @@ -0,0 +1,5369 @@ +% \def\fileversion{2.3}\def\filedate{2001/05/06}\def\docdate{2013/11/26} +%\iffalse These lines are necessary for the doc and docstrip utilities +%<*asciidocu> + +%%# +%%# Author: +%%# +%%# M. V\"ath martin@mvath.de +%%# +%%# This package bases on ideas of indextwo.sty which was written jointly with +%%# +%%# O. Karch karch@informatik.uni-wuerzburg.de +%%# H.-C. Wirth wirth@informatik.uni-wuerzburg.de + +%%# The package may be distributed and/or modified under the conditions of +%%# the LaTeX Project Public License (version 1.3c or later). + +%%############################################################################# +%%# +%%# This LaTeX package provides a luxury front-end for the \index command. +%%# For example, it allows to generate multiple \index entries in +%%# almost any form by a single command. Extremely customizable. +%%# Works with all versions of LaTeX and probably most other TeX formats, too. +%%# This package requires the toolbox package at least in version 3.1. +%%# +%%############################################################################# + +%%# +%%# This package was tested with LaTeX 2.09 and LaTeX 2e and should work +%%# with all other (future) versions of LaTeX and friends, too. +%%# It should even run with other (non-LaTeX) formats if an \index command +%%# with LaTeX-Syntax is provided. +%%# + +% If you have access to (reasonable new) docstrip TeXfiles, you should run +% tex/latex on the file +% `varindex.ins' +% to produce the files `varindex.sty', `varindex.txt' and `varindex.tex'. +% (In case `varindex.ins' is lost: You can find its content in the last +% few lines of the file you are currently reading between the +% lines %<*insfile> and %; +% BTW: You should name this file here `varindex.dtx' before you run tex +% on varindex.ins). +% +% The file `varindex.txt' contains a `brief' (but complete) ascii +% documentation. If you have additionally access to LaTeX2e, you may run +% latex on the generated file `varindex.tex' to produce `varindex.dvi' which +% contains a more luxury documentation. (If you want an index or +% implementation details in the documentation read the comments in +% `varindex.tex' before running it through latex). +% +% If you do not have access to the docstrip TeXfiles you may simply +% copy/rename this file here into +% `varindex.sty' +% to use the package and read the ascii documentation in this file. +% The ascii documentation (the content of `varindex.txt') consists of all +% lines in this file which start with %%# (this is the above block and another +% (very large) block which follows soon). +% +% But I do not recommended this, because TeX will need more time to read this +% longer file, and because there might be a (very slight) incompatibility if +% you use it (namely if you load `varindex.sty' with some *extremely* strange +% catcodes). +% I recommend in this case instead to generate the file `varindex.sty' as +% anything between the lines %<*package> and % by hand. +% (This is not precisely the file which you get with the docstrip TeXfiles, +% but a reasonable good substitute. To speed up loading, you may also +% eliminate all lines starting with `% ' in `varindex.sty'). +% For your information: The file `varindex.tex' produced by the docstrip +% TeXfiles is anything between the lines %<*driver> and % +% (with a line containing \endinput and two comment lines appended) +% +% +% In any case, you end up with the file `varindex.sty'. +% +% If you can generate `varindex.tex', you will probably want to stop +% reading now and instead read the `luxury' documentation in `varindex.dvi'. +% +% Otherwise, you have to make due with the following ascii documentation. +% +% +% \fi\catcode\#14\relax\iffalse (This line is needed for the doc utility) +% + +%%# To use varindex, you have to put `varindex.sty' in a path where TeX looks +%%# for its input files. You must also have the file `toolbox.sty' of the +%%# toolbox package in your path. The TeX documents using varindex need the +%%# following modifications in their header: +%%# +%%# a) If you use LaTeX2.09, use varindex as a style option, e.g. +%%# \documentstyle[varindex]{article} +%%# or +%%# \documentstyle[varindex,12pt]{article} +%%# b) If you use LaTeX2e, put in the preamble the command +%%# \usepackage{varindex} +%%# c) If you use some other (non-LaTeX) format, you will probably have to +%%# insert a line like +%%# \catcode`\@=11\input varindex.sty\catcode`\@=12\relax +%%# +%%# For TeX insiders: LaTeX-specific commands used in `varindex.sty' are only: +%%# +%%# \makeatother +%%# \makeatletter +%%# \typeout +%%# \RequirePackage +%%# \newcommand (only in the form \newcommand{\command}{} to ensure that +%%# \command was not defined before) +%%# \ProvidesPackage +%%# +%%# The above commands are used only if they are defined (otherwise, +%%# natural substitutes are used (\newcommand and \Provides package are +%%# then not used at all)) + + +%%# +%%# I strongly recommend to have additionally a look at the documentation +%%# of the "toolbox" package, in particular the \toolboxMakeDef command +%%# (provided since toolbox v3.1) which supplements \varindex. +%%# + +%%# +%%# The \varindex command is highly customizable. +%%# So the following examples can only give you a rough impression of what +%%# you can actually do with it. You do not need to understand them now: +%%# The general usage is explained later. (Maybe you want to look up the +%%# examples afterwards). +%%# +%%# +%%# 1. Typical example of usage (using the \varindextwo macros): +%%# +%%# +%%# +%%# Suppose the following customization of the \varindex command was defined: +%%# \def\Index{\varindex(){\varindextwoScan}{\varindextwo}[\emph]} +%%# Since we used the \varindextwo macros here, by default +%%# TWO index entries are generated with a single command: +%%# +%%# \Index{ring with $1$@one} +%%# +%%# ring +%%# ~ with $1$ [sorted like: "with one"] +%%# +%%# $1$ [sorted like: "one" ] +%%# ring with ~ [sorted like: "ring with" (without " ~") ] +%%# +%%# DIFFERENT entries may be generated by your own rules. E.g.: +%%# +%%# \Index{Hausdorff measure of noncompactness}[4,23 2!~34!1= ] +%%# +%%# generates THREE index entries: +%%# +%%# noncompactness, measure of ~ (sorted like "noncompactness, measure of") +%%# +%%# measure +%%# ~ of noncompactness +%%# Hausdorff = (here, = stands for the $\approx$ symbol) +%%# +%%# Hausdorff measure of noncompactness +%%# +%%# The last of these entries occurs only, because the last character in +%%# the format argument [...] was a space. +%%# +%%# If you want only slight modification(s) of the default, you need also just +%%# slight modifications of the command, e.g. +%%# +%%# \Index*,{ring with $1$@one} is as above, just that the second entry reads +%%# +%%# $1$, ring with ~ [sorted like "one, ring with" ] +%%# +%%# Moreover, since the `*' occured in the previous command, additionally +%%# +%%# \emph{ring with $1$} +%%# +%%# appears in the running text. Praxis shows that changes in the entries as +%%# above have to be made frequently in the `fine tuning' of the index of a +%%# book. Note that with the original \index the command would have to be +%%# changed completely for the above entries, because we have a "sort" entry +%%# for which a different rule applies if we use a subitem instead of a ",". +%%# (BTW: \varindex produces sort entries only if they are necessary). +%%# +%%# Of course, you may combine the default with your own format: +%%# +%%# \Index{internal integrable function}[23,1~ +] generates +%%# +%%# integrable function, internal ~ +%%# +%%# internal +%%# ~ integrable function +%%# +%%# function +%%# internal integrable ~ +%%# +%%# +%%# 2. A simple example without the \varindextwo macros: +%%# +%%# \varindex*{topology of a normed space}{5!4~!1= 45,12}[|see{norm}] +%%# +%%# produces the two index entries: +%%# +%%# space +%%# normed ~ +%%# topology = +%%# +%%# normed space, topology of +%%# +%%# In both entries not the pagenumber is cited, but the text "see also norm". +%%# Additionally, the tokens {topology of a normed space} are +%%# inserted into the running text (this would not happen if +%%# \varindex is used in place of \varindex*). +%%# Only in the first of the above entries, an `@' part will be added to the +%%# *.idx file: This entry is sorted as if " ~" resp. " =" would not exist. +%%# +%%# +%%# 3. Another example without the \varindextwo macros: +%%# +%%# \varindex[\emph][|textbf]% +%%# {$\sigma$@sigma!$(\sigma-)$ finite {measure space}}% +%%# {*1.23 23 23,1- 1-23} +%%# +%%# generates the three index entries: +%%# +%%# finite measure space +%%# +%%# finite measure space, $\sigma$- (sorted as "finite measure space, sigma-") +%%# +%%# $\sigma$-finite measure space (sorted as "sigma-finite measure space") +%%# +%%# In all three entries the pages are printed using \textbf. +%%# +%%# Moreover, the tokens +%%# \emph{($\sigma$-)finite measure space} +%%# are put into the running text. +%%# +%%# +%%# 4. A simple example using a flag (without the \varindextwo macros): +%%# +%%# \varindex1{$L$ and $M$@L and M}{} +%%# ^ +%%# +%%# generates the index entry "$L$ and $M$" which is sorted like "L and M". +%%# In the form +%%# \varindex1*{$L$ and $M$@L and M}{} +%%# or +%%# \varindex*1{$L$ and $M$@L and M}{} +%%# additionally, {$L$ and $M$} is output into the running text. +%%# +%%# Note that without the `1', the index generated were +%%# "$L$ and $M$ and M" which were sorted like "$L$ and L and M". +%%# +%%# +%%# 5. An example for very primitive customized index commands (without the +%%# \varindextwo macros): +%%# +%%# \def\myindexA{\varindex[\emph][|textbf]*} +%%# \def\myindexB{\varindex(){}{}[\emph][|textbf]} +%%# +%%# \myindexA{Foo1}{} +%%# \myindexB{Foo2}[][] +%%# \myindexB*{Foo3!{Foo 3}} +%%# +%%# Generates the index entries Foo1, Foo2, and Foo3. Moreover, \emph{Foo1} +%%# and \emph{Foo 3} is put into the running text. The pagenumber of Foo 2 in +%%# the index is printed normal, the others with \textbf. +%%# +%%# +%%# 6. An example of a primitive customized index command (without the +%%# \varindextwo macros): +%%# +%%# \def\myindex{\varindex(\ifnum\varindexCount=2 1!2 2,1\fi){}{}[\emph]} +%%# +%%# \myindex{Foo Bar} +%%# generates the index entries +%%# Foo +%%# Bar +%%# +%%# Bar, Foo +%%# +%%# \myindex*{Foo Bar} +%%# generates the same index entries as above and additionally outputs +%%# \emph{Foo Bar} into the running text. +%%# +%%# \myindex*{other format}[21] +%%# generates the index entry +%%# format other +%%# and outputs \emph{other format} into the running text. +%%# +%%# \myindex[|textbf]*{BoBo} +%%# generates the index entry +%%# BoBo +%%# where the pagenumber is printed with \textbf. +%%# Moreover, \emph{BoBo} is output into the running text. +%%# +%%# +%%# 7. A primitive varying customized index command (without the \varindextwo +%%# macros): +%%# +%%# \def\myindex{\varindex(\ifnum\varindexCount=2 1!2 2,1\fi)% +%%# (\ifnum\varindexCount=2*2,1 1!2 2,1\fi){}{}[\emph]} +%%# +%%# With the same commands as in 6. the same index entries are generated, +%%# but the tokens \emph{Far, Boo}, \emph{other format}, and \emph{Bobo} +%%# are output into the running text. +%%# +%%# +%%# 8. Examples with the \varindextwo macros: +%%# We use a similar definition for \Index as in 1., and define an \iemph +%%# macro which has `*' as a default and outputs with \emph. +%%# Both sort of definitions are highly recommended for you private style. +%%# +%%# \def\Index{\varindex(){\varindextwoScan}{\varindextwo}[]} +%%# \def\iemph{\varindex(){\varindextwoScan\def\varindexStarPos{}}% +%%# {\varindextwo}[\emph]} +%%# (note that \def\iemph{\varindex(){\varindextwoScan}{\varindextwo}[\emph]*} +%%# is not so good as the above definition of \iemph as is explained below). +%%# +%%# \Index*{measure of $\gamma$-noncompactness@gamma-noncompactness!FOO} +%%# +%%# generates the index entries +%%# +%%# measure +%%# ~ of $\gamma$-noncompactness (sorted as "of gamma-noncompactness") +%%# +%%# $\gamma$-noncompacntess +%%# measure of ~ +%%# +%%# and outputs the tokens {measure of FOO} into the running text. +%%# +%%# \Index*,?_'{flic of flac} generates +%%# +%%# flic of flac +%%# +%%# flac, flic +%%# +%%# and outputs {flic of flac}. +%%# +%%# \Index^={$\sigma$@sigma algebra} generates +%%# +%%# $\sigma$ (sorted as "sigma") +%%# ~-algebra (sorted as "algebra" resp. "-algebra", see below) +%%# +%%# algebra +%%# $\sigma$-~ (sorted as "sigma-") +%%# +%%# Here, the sorting "-algebra" is chosen when you used +%%# \let\varindexOutSortDashBeg\varindexOutSortDash +%%# as described later. +%%# +%%# \Index-^>{$\sigma$@sigma algebra} generates +%%# +%%# $\sigma$- (sorted as "sigma-") +%%# ~ algebra (sorted as "algebra") +%%# +%%# \Index^.,:{ultra filter} generates +%%# +%%# ultra +%%# ~filter (no space following ~) +%%# filter, ultra~ (no space in front of ~) +%%# +%%# \iemph[|see{recursive recursion}],_{recursive recursion} generates +%%# +%%# recursive recursion, \see{recursive recursion} +%%# +%%# recursion, recursive ~, \see{recursive recursion} +%%# +%%# and outputs \emph{recursive recursion}. If we would have used instead the +%%# definition \def\iemph{\varindex(){\varindextwoScan}{\varindextwo}[]*}, +%%# the above call were not possible, since the optional arguments [|see...] +%%# must occur in front of the flag `*'. +%%# +%%# \Index-;*{Flip Flop} generates +%%# +%%# Flip-Flop +%%# +%%# FlopFlip +%%# +%%# and outputs {Flip-Flop} (!!!!!!!) +%%# +%%# \Index>{Flippy Flop!GO}[*2-1-2 2!1-1 1-12 +] +%%# +%%# generates +%%# +%%# Flop +%%# Flippy-Flippy (no tilde!) +%%# +%%# Flippy-Flippy Flop +%%# +%%# Flippy +%%# ~ Flop +%%# +%%# and outputs {GO-Flippy-GO} (!!!) +%%# +%%# \Index*_,{shape {of a} of star} generates +%%# +%%# shape of a star +%%# +%%# star, shape of ~ (sorted like "star, shape of") +%%# +%%# and outputs {shape of a star}. +%%# +%%# \Index1*{$L$ feature@L feature} +%%# \Index,{No $L$@L feature} +%%# generate +%%# +%%# $L$ feature (sorted like "L feature") +%%# +%%# No +%%# ~ $L$ feature (sorted like "L feature") +%%# +%%# feature, No $L$ ~ (sorted like "feature, No L") +%%# +%%# and outputs {$L$ feature}. +%%# +%%# +%%# 9. Example of a simple modification of the \varindextwo macros: +%%# +%%# \def\myindextwoScan{% +%%# \varindextwoScan +%%# \varindexNewFlag ~\vxtSpaceA +%%# \varindexNewFlag 1\vxtSpaceB +%%# \varindexNewFlag !\varindexOneEntry +%%# \varindexMakeSplitExpand{/}{vxtSplitAtMagic}% +%%# \def\varindexStarPos{}% +%%# } +%%# \def\myIndex{\varindex(){\myindextwoScan}{\varindextwo}[]} +%%# +%%# \myIndex behaves similar to the previous example with +%%# the following differences: +%%# 1. The flag `1' now has the previous meaning of "~". +%%# 2. One may now use "~" and "_" equivalently. +%%# 3. The flag `!' now has the originial meaning of the flag `1'. +%%# 4. Instead of `+' in the format string, the character `/' has to be used. + +%%# +%%# +%%# Description: +%%# +%%# There are two possible calls: +%%# +%%# a) \varindex[textstyle][pagestyleA]flags{main entries}{format}[pagestyleB] +%%# +%%# Here, [textstyle], [pagestyleA], [pagestyleB], and flags are optional. +%%# (If [textstyle] is omitted, also [pagestyleA] must be omitted). +%%# +%%# textstyle: describes the textstyle used for the output into the +%%# running text (typically, textstyle is \emph or empty). +%%# pagestyle: describes the pagestyle used for the output of the pagenumber +%%# (you may also use a construct like |see{...} here). +%%# If [pagestyleB] is present, this is the value used. +%%# Otherwise, the value of [pagestyleA] is used (resp. nothing). +%%# flags can be one (or both) of the following tokens: +%%# `*': "Output into running text": +%%# If no * is used in the format string (see below), +%%# then the format is automatically prepended by the tokens `* ' +%%# resp. `*' (depending whether format starts with ` ' or not) +%%# `1': The content of {main entries} is considered as a single entry +%%# (see below). +%%# {main entries} and +%%# {format} are explained later. +%%# +%%# b) \varindex(formatA)(format*A){scanprogram}{mainprogram} +%%# [textstyle][pagestyleA]flags{main entries}[formatB][pagestyleB] +%%# +%%# Concerning [textstyle], [pagestyleA], flags, [pagestyleB], the same +%%# remarks as in a) hold. Also (format*A) and (formatA) are optional. +%%# (if (formatA) is omitted, also (format*A) must be omitted). +%%# +%%# The "default" format is formatA resp. format*A (depending whether the +%%# flag "*" has been used or not). If [formatB] is given, then this is +%%# used as the format (i.e. it overrides the default). +%%# +%%# scanprogram is executed immediately when \varindex reads it. +%%# This can be used to introduce FURTHER flags (other than '*' and `1'), +%%# see below. +%%# mainprogram is executed AFTER the format string(s) has been expanded. +%%# +%%# +%%# +%%# It is recommended to define personal macros which contain all parameters up +%%# to the place where the flags occur (either with or without some flags, +%%# depending on the intention). See the examples above. +%%# +%%# +%%# +%%# +%%# The main argument (called {main entries} above) has the form +%%# +%%# entry1[`space' entry2][`space' entry3] ... +%%# +%%# where each of entry1 entry2 entry3 ... in turn has the form +%%# indextext@sorttext!outputtext or +%%# indextext!outputtext@sorttext +%%# In each of these forms, @sorttext and !outputtext are optional. +%%# Here, +%%# indextext is the text which is put into the index for the entry +%%# sorttext is what is used as a sort criterion for the entry +%%# outputtext is what is output into the running text for the entry +%%# +%%# Note that the symbol @ has in a sense the opposite meaning as in the +%%# original \index command: +%%# BEFORE that symbol, the desired text appears, and +%%# AFTER the symbol the place where it has to be sorted. +%%# However, we chose the symbols @ and !, because these two +%%# symbols are forbidden anyway (otherwise, makeindex will become confused). +%%# +%%# As usual, multiple spaces are considered as ONE space and do not generate +%%# empty "ghost" entries. Moreover, a space after a TeX-command like \LaTeX +%%# is eliminated by TeX and thus also not considered as a separator. +%%# You may use braces {...} either around a whole entry or +%%# around indextext resp. sorttext resp. outputtext to allow spaces +%%# which do not act as "separators" in the corresponding part. The braces +%%# around these parts will vanish. In particular, you may generate an +%%# empty entry with {} or ! or @ (bordered by spaces). +%%# If you want that braces occur in the OUTPUT, you have to add an +%%# additional pair of braces. Be aware that you write sufficiently +%%# many braces, if you really should need them: For example, +%%# the command \varindex{{{{A B}}}}{} produces the index entry {A B}: +%%# The outermost pair of braces is eliminated immediately by TeX. The second +%%# pair is eliminated, because this is a pair around a complete entry. +%%# Finally, another pair is eliminated, because it is a brace around +%%# indextext. +%%# With the flag `1', {main entries} is considered as one single entry. +%%# Nevertheless, also with this flag, an additional pair of braces around +%%# main entry is eliminated. +%%# +%%# +%%# The format string has one of the following three forms +%%# indexa[`space' indexb][`space' indexc] ... [*outputa][*outputb] ... +%%# [*outputa][`space' indexa][`space' indexb][*outputc] ... +%%# * +%%# where the order of arguments can be arbitrarily mixed (except for the first +%%# indexa in the first form). indexa indexb ... outputa ... describe the +%%# format of the index entries resp. of the output into the running text. +%%# The output is generated in the given order (this might be important, if +%%# a pagebreak occurs during the output into the running text). +%%# The last case is exceptional and equivalent to `*space'. +%%# The following characters/strings describe the format: +%%# +%%# 1-9: entry1-9 +%%# 0: entry 10 +%%# ~: a placeholder sign +%%# =: alternative placeholder sign +%%# _: a space character +%%# s: The token \space (but _ is used for the sort entry) +%%# .: No space will follow +%%# ,: The character , (space will follow) +%%# -: The character - (no space will follow) +%%# !: Create a new sublevel +%%# All other tokens in this argument are forbidden. +%%# The token ! makes no sense for the output in the running text and thus +%%# is forbidden behind *. +%%# +%%# By a heuristic rule, a space is automatically inserted between two entries +%%# which generate non-empty text. If the heuristic rule fails, you may always +%%# force a space by either "_" or "s", or forbid a space by ".". +%%# +%%# If a format is empty, all entries are taken in the order of input. +%%# Note that TeX eliminates concatenated spaces, and so you are able to +%%# produce an empty format entry only at the end or in front of a `*'. +%%# If you want to force an empty OUTPUT (is this ever useful?), you may use +%%# just "." as the entry. +%%# +%%# A sort entry is only written to the *.idx file if it differs from the +%%# text entry. + +%%# +%%# +%%# Description of the \varindextwo macros: +%%# +%%# The macros +%%# +%%# \varindextwoScan \varindextwo +%%# +%%# can be used together as parameters {scanprogram} resp. {mainprogram} +%%# for the \varindex command. +%%# If \varindex is called with these macros, and no +%%# explicit format argument is given, these macros generate a format +%%# depending on the number of entries in {main entries}: +%%# +%%# a) If there is only one entry in {main entries}, +%%# then the format "1" resp. "*1 1" is generated +%%# (depending whether the * flag was used or not), i.e. the +%%# entry is put into the index, and printed if \varindex was +%%# called with the * flag. +%%# +%%# b) If there are two main entries like {graulty bazola}, +%%# then the format becomes { 1!~2 1!2~}, i.e. the index entries +%%# +%%# graulty +%%# ~ bazola +%%# +%%# bazola +%%# graulty ~ +%%# +%%# are produced. +%%# +%%# You can modify the first format entry with the following flags: +%%# flags format used: If used with `*' additionally: +%%# _ 12 *12 +%%# - 1-2 *1-2 +%%# ^ 1!~-2 resp. 1!-2 *1-2 +%%# -^ 1-!~.2 resp. 1-!~2 *1-2 +%%# . 1.2 *1.2 +%%# .^ 1!~.2 *1.2 +%%# / 1!2 (without ~) *12 +%%# < no entry *12 +%%# +%%# Here, the combinations -^ and .^ mean that both flags are used +%%# (the order plays no role). +%%# The output for ^ respectively -^ is determined by the switches +%%# \varindextwoDashTildetrue (default) +%%# \varindextwoDashTildefalse +%%# \varindextwoDashSpacetrue +%%# \varindextwoDashSpacefalse (default) +%%# +%%# You can modify the second format entry with the following flags: +%%# flags format used: +%%# , 2,1~ resp. 2,1 +%%# ~ 21 +%%# = 2!1-~ +%%# ,= 2,1-~ resp. 2,1- +%%# + 2-1 +%%# : 2!1.~ +%%# ,: 2,1.~ resp. 2,1 +%%# ; 2.1 +%%# > no entry +%%# ! Append ~ (if not already there) +%%# ? Without ~ +%%# +%%# Whether the first or the second alternatives in the above forms is used +%%# depends on the status of the switch +%%# \varindextwoCommaTildetrue (default) +%%# \varindextwoCommaTildefalse +%%# We point out that "\varindextwoCommaTildefalse" was in earlier versions +%%# of "varindex" the default (and could not be changed). +%%# Note that this switch has no effect if the ! or ? flags are used. +%%# +%%# HINT for remembering the symbols: The symbols _ . - for the first entry +%%# are the same flags as for the output and the same flags which are used +%%# in the format string. The corresponding symbols ~ : (and ;) = (and +) +%%# for the second entry "look similar". The "," is only useful in the +%%# second entry (and is the same symbol as in the format string). +%%# The two exceptional symbols ">" and "<" can be read as "generate only +%%# the forward-directed resp. backward-directed entry". +%%# +%%# c) If there are three main entries like {graulty of bazola}, then the +%%# format becomes { 1!~23 3!12~}, i.e. the output becomes +%%# +%%# graulty +%%# ~ of bazola +%%# +%%# bazola +%%# graulty of ~ +%%# +%%# The flags have an analogous effect to b). +%%# In addition, if the flags ` resp. ' are used, the second word +%%# (in our example: `of') is omitted from the output in the first resp. +%%# in the second index entry. If the * flag and ` are used together, the +%%# second entry is also omitted from the output into the running text. +%%# +%%# d) If there are four main entries like {graulty of OF bazola}, then the +%%# format becomes { 1!~24 4!31~}, i.e. the output becomes +%%# +%%# graulty +%%# ~ of bazola +%%# +%%# bazola +%%# graulty OF ~ +%%# +%%# i.e. we have a similar effect as in c) except that for the first entry +%%# the third word is skipped, and for the second entry the second word is +%%# skipped. All flags as in c) can be used with an analogous meaning. +%%# Also if the * flag is used, the output into the running text is +%%# analogous to c) (the third word is skipped). +%%# +%%# e) If there are more than four main entries, then +%%# (formatA) resp. (format*A) is used. +%%# +%%# If an explicit format argument is provided, then this is used except +%%# when it contains the symbol +. In this case, this symbol is replaced by the +%%# output which would be generated "normally". If additionally the `*'-flag +%%# is used, there is a special rule: +%%# If the explicit format contains a `*', then no additional `*'-output is +%%# produced. Otherwise, the `*'-output from a)-e) is prepended to the given +%%# format string (with a space at the end, unless the format string is empty). +%%# This means that `normally' you have the output from a)-e), +%%# unless you write an own `*'-part in the argument. +%%# +%%# If you do not like the tokens chosen for the default symbols, you can +%%# easily choose your own tokens by just replacing \varindextwoScan with your +%%# own macro (or defining your own ``magic'' tokens after \varindextwoScan, +%%# see Example 9. above). + +%%# +%%# +%%# Primitive customization: +%%# +%%# +%%# You may use the command +%%# \varindexUsePlaceholderAfalse +%%# \varindexUsePlaceholderBfalse +%%# to ignore the sign ~ resp. = in the format entry. +%%# You can easily restore the default by +%%# \varindexUsePlaceholderAtrue +%%# \varindexUsePlaceholderBtrue +%%# +%%# If you want to switch off the placeholder only at the beginning of +%%# a new entry (resp. of a new subentry), you can use the commands +%%# \varindexLeadingPlaceholderAfalse +%%# \varindexLeadingPlaceholderBfalse +%%# The default is restored with +%%# \varindexLeadingPlaceholderAtrue +%%# \varindexLeadingPlaceholderBtrue +%%# +%%# By default, the "," in the format string is in this connection +%%# treated as a symbol generating a new "subentry". You can change this +%%# default with the command +%%# \varindexCommaLeadsfalse +%%# You may switch back with +%%# \varindexCommaLeadstrue +%%# +%%# +%%# The content of the macro +%%# \varindexPlaceholderAText +%%# \varindexPlaceholderASort +%%# \varindexPlaceholderBText +%%# \varindexPlaceholderBSort +%%# is used as the placeholder ~ resp. = in the index resp. sort entry. +%%# Note that if one of these entries expands empty, different rules for +%%# the automatic insertion of spaces apply (for the index and sort entry +%%# separately). +%%# +%%# You may prefer that the placeholder text resp. sort content changes at +%%# run time to the context of the previous ! entry. For example, you may +%%# want that the command \varindex{Gibble Gobble}{2!~2} produces the index +%%# entry +%%# Gibble +%%# Gibble Gobble +%%# (or is at least SORTED as such an entry). +%%# +%%# You can achieve this with the commands +%%# \varindexPreviousATexttrue +%%# \varindexPreviousASorttrue +%%# \varindexPreviousBTexttrue +%%# \varindexPreviousBSorttrue +%%# for the text and sort entry and the placeholders ~ and =, respectively. +%%# With these commands, the content of \varindexPlaceholderAText etc +%%# is only used as the default if no previous ! entry was given. +%%# You can switch back to the default mode with the respective commands +%%# \varindexPreviousATextfalse +%%# \varindexPreviousASortfalse +%%# \varindexPreviousBTextfalse +%%# \varindexPreviousBSortfalse +%%# +%%# By default, the ',' in the format entry is considered in this connection +%%# similar to '!'. If you want to change this, use the command +%%# \varindexCommaExpandfalse +%%# You may switch back with +%%# \varindexCommaExpandtrue +%%# +%%# Since version 2.2, the dash "-" occurring at the beginning of entry +%%# (or after "!" or even after "," if \varindexCommaExpandtrue is in effect) +%%# is ignored for sorting. You can switch off this feature with the command +%%# +%%# \let\varindexOutSortDashBeg\varindexOutSortDash +%%# +%%# To restore the new default, use +%%# +%%# \let\varindexOutSortDashBeg\toolboxEmpty +%%# +%%# +%%# The commands +%%# +%%# \varindexSetWordString{|} % Use | as separator for entries instead +%%# % of spaces. +%%# \varindexSetSortString{>} % default: @ +%%# \varindexSetPlainString{<} % default: ! +%%# +%%# set the default "magic" strings used for the main argument. +%%# The argument of the above macros is intentionally NOT expanded (so that +%%# you do not have troubles with active characters like ~). +%%# To force expansion, use e.g. +%%# \expandafter\varindexSetWordString\expandafter{\MacroToExpand} +%%# or some similar construct. +%%# +%%# If you use a different separator than `space' for the entries, you may want +%%# to change the rule how braces are eliminated. With the commands +%%# \varindexEliminateOuterBracetrue +%%# \varindexEliminateInnerBracetrue +%%# \varindexEliminateOuterBracefalse +%%# \varindexEliminateInnerBracefalse +%%# you may allow resp. forbid the elimination of braces around the entries +%%# resp. around {indextext} {sorttext} and {outputtext} +%%# With the flag `1', {main entries} is considered as one single entry, +%%# but if \varindexEliminateOuterBracetrue is set (which is the default) +%%# also in this case an additional pair of braces around main entry is +%%# eliminated. +%%# +%%# Similarly as above, +%%# +%%# \varindexSetIndexString{|} % default: space +%%# \varindexSetOutputString{<} % default: * +%%# \varindexSetTildeAString{~} % (is default) +%%# \varindexSetTildeBString{=} % (is default) +%%# \varindexSetSpaceString{_} % (is default) +%%# \varindexSetSpaceTokString{s} % (is default) +%%# \varindexSetOmitString{.} % (is default) +%%# \varindexSetCommaString{,} % (is default) +%%# \varindexSetDashString{-} % (is default) +%%# \varindexSetExclamString{!} % (is default) +%%# \varindexSetStringForNr 1{a} % default: 1 +%%# \varindexSetStringForNr{11}{b}% No default! +%%# +%%# sets the default "magic" strings used for the format argument. +%%# In contrast to before, the arguments are fully expanded (with +%%# \varindexedef, see below). +%%# Note that the last command provides a way to access more than 10 entries! +%%# +%%# If you use \varindexSetIndexString{|} (with some non-space token), +%%# you may still use spaces in the format which then are just ignored. +%%# +%%# +%%# Avoid that one string is a prefix of another string: In this case, +%%# strange effects may happen, and this behavior may even change in +%%# future releases of this package. +%%# Note that the above effect may arise unintentionally if you use active +%%# chars. For this reason, `~' is defined to expand to the letter `~', +%%# before the expansion is executed. Maybe in later releases of this package +%%# there will be further such redefinitions. +%%# You can explicitly use this feature in your own macros by using +%%# \varindexedef instead of the usual \edef, see below. +%%# +%%# +%%# You can change the output for the text resp sort entry of the various +%%# symbols used in the format string. More precisely, you can redefine +%%# +%%# \varindexOutExclam % Text output for ! +%%# \varindexFollowsExclam % Decide whether magic space after ! is inserted +%%# \varindexOutTextComma % Text output for , +%%# \varindexOutSortComma % Sort output for , +%%# \varindexFollowsComma % Decide whether magic space after , is inserted +%%# \varindexPreceedsComma % Decide whether magic space before , is erased +%%# \varindexOutTextSpace % Text output for _ +%%# \varindexOutSortSpace % Sort output for _ +%%# \varindexFollowsSpace % Decide whether magic space after _ is inserted +%%# \varindexPreceedsSpace % Decide whether magic space before _ is erase +%%# \varindexOutTextSpTok % Text output for s +%%# \varindexOutSortSpTok % Sort output for s +%%# \varindexFollowsSpTok % Decide whether magic space after s is inserted +%%# \varindexPreceedsSpTok % Decide whether magic space before s is erased +%%# \varindexOutTextDash % Text output for - +%%# \varindexOutSortDash % Sort output for - +%%# \varindexOutSortDashBeg% Sort output for - if nothing preceeds +%%# \varindexFollowsDash % Decide whether magic space after - is inserted +%%# \varindexPreceedsDash % Decide whether magic space before - is erased +%%# \varindexOutTextOmit % Text output for . +%%# \varindexOutSortOmit % Sort output for . +%%# \varindexFollowsOmit % Decide whether magic space after . is inserted +%%# \varindexPreceedsOmit % Decide whether magic space before . is erased +%%# +%%# The meaning is as follows: \varindexOut... should just expand to the +%%# tokens which should be written into the text resp. sort output. +%%# The corresponding macro \varindexFollows... is typically defined with +%%# one of the following commands: +%%# \let\varindexFollows...\varindexNextSpace +%%# \let\varindexFollows...\varindexNoNextSpace +%%# In the first case, a space is `magically' inserted in front of a +%%# subsequent token (unless this token erases the magic space). +%%# In the second case, no space follows, of course. +%%# There is an alternative call: +%%# \def\varindexFollows...{\varindexSpaceTexttrue\varindexSpaceSortfalse} +%%# This definition achieves that for the text output a space should follow, +%%# but not for the sort output. Of course, you can also use similarly the +%%# commands \varindexSpaceTextfalse and/or \varindexSpaceSorttrue +%%# in the above definition (the effect should be obvious). +%%# In particular, \varindexNextSpace is equivalent to +%%# \varindexSpaceTexttrue\varindexSorttrue. +%%# +%%# The macro \varindexPreceeds... is similarly as \varindexFollows... with +%%# the difference that it is executed BEFORE the token in question is +%%# output. In particular, you can ignore a previous `magic space'. +%%# All of the `magic space' commands are defined by default with +%%# \let\varindexFollows...\toolboxEmpty +%%# \let\varindexPreceeds...\varindexNoNextSpace +%%# with the following two exceptions: +%%# \let\varindexFollowsExclam\varindexNoNextSpace +%%# \let\varindexFollowsComma\varindexNextSpace +%%# +%%# Documented Features (in later versions, these will still be available, +%%# and if they contain a bug now, they will be repaired to work this way): +%%# +%%# (In a future release, varindex will cook your coffee, too) +%%# +%%# +%%# +%%# The main argument is NOT expanded, so you can actually write macros +%%# into the *.idx file. The command actually used to write the index is +%%# +%%# \varindexIndex +%%# +%%# (which by default is of course defined as \index). +%%# Since some implementations of the \index command still (partially) expand +%%# their argument (which might be considered as a bug), the argument of +%%# \varindexIndex is translated before the actual call with the aid of +%%# \toolboxMakeHarmless. +%%# If you want to redefine \varindexIndex to a personal \index-output +%%# function, you might want to skip the \toolboxMakeHarmless step. +%%# This is arranged with the command +%%# +%%# \varindexNoConvert +%%# +%%# You can cancel the effect of this command with +%%# +%%# \varindexDoConvert +%%# +%%# Even if \varindexNoConvert is not in effect, the main argument is not +%%# expanded (and in particular, the argument of \varindexIndex consists of +%%# the corresponding entries in an unexpanded form). +%%# +%%# The whole \varindex... procedure takes place in a group, so all your +%%# variables are local to a single call (unless you use \gdef... +%%# (and friends) of course). +%%# +%%# There are no \global directives in any macro related with this package. +%%# In particular, if you call the above macros in a group (or redefine +%%# \varindexIndex), the effect holds only until the end of the group. +%%# +%%# In contrast to the main argument, the format argument is expanded +%%# (with \varindexedef, see below) +%%# (and also formatA resp. format*A is expanded before), +%%# so you can define abbreviations (even simple conditional abbreviations) +%%# for the format. Note, however, that the expansion is essentially only +%%# evaluated with \edef. So, you will probably not want to use e.g. \relax, +%%# since this command expands to itself (and not into nothing - use +%%# \toolboxEmpty if you want the latter). +%%# If you want more complex abbreviations, use {mainprogram} instead. +%%# +%%# In order to help you write conditional abbreviations, the +%%# following variables are defined when your macro is expanded (and in +%%# particular also in {mainprogram}). You may of course redefine them +%%# appropriately: +%%# +%%# \varindexAppend The argument pagestyleA resp. pagestyleB. +%%# \varindexCount a TeX counter containing the number of entries in +%%# the main argument. +%%# \varindexLastEntry This is a macro (NOT a counter) which is usually +%%# the value of \the\varindexCount. See below. +%%# \varindexEntry1-... The (index) text occuring in entry 1-... +%%# \varindexSort1-... The corresponding sort entry. If no sort entry was +%%# given, this is the same as the corresponding +%%# \varindexEntry1-... +%%# \varindexPlain1-... The text which should be output in the text. If no +%%# such entry was given, this is the same as the +%%# corresponding \varindexEntry1-... +%%# +%%# \varindexCount may be larger than 10, and correspondingly there may be +%%# also more than 10 different \varindexEntry/Sort/Plain macros. +%%# If you ADD entries, you have to increase \varindexCount correspondingly, +%%# otherwise an error is produced if the format string contains an entry +%%# larger then \varindexCount. However, your additional entries are NOT +%%# output for EMPTY formats: For empty formats the number used is +%%# \varindexLastEntry. So if you want to output also your additional entries +%%# in empty formats, you have to set \varindexLastEntry to your modified +%%# value of \varindexCount in mainprogram. You may e.g. achieve this with +%%# the following lines: +%%# \expandafter +%%# \def\expandafter\varindexLastEntry\expandafter{\the\varindexCount}% +%%# It is admissible that \varindexLastEntry is larger than \varindexCount: +%%# In this case all entries until \varindexLastEntry are +%%# output in empty formats without producing an error (provided, of course, +%%# that the corresponding variables \varindexEntry.../Sort.../Plain... are +%%# defined). +%%# +%%# Note that numbers in TeX command names require special handling, +%%# i.e., you have to use something like +%%# +%%# \csname varindexPlain2\endcsname +%%# +%%# to access variables. To avoid this, you may want to use the macros +%%# \toolboxLet and \toolboxWithNr of the toolbox package. Examples are +%%# \toolboxWithNr 1\let{varindexEntry}\toolboxEmpty +%%# \toolboxWithNr {10}\def{varindexSort}{Foo} +%%# \toolboxLet \mymacro{varindexPlain\the\mycount} +%%# These commands set \varindexEntry1 to \toolboxEmpty, \varindexSort10 to +%%# Foo, and \mymacro to the content of \varindexPlain5 (if \mycount=5). +%%# +%%# All these variables are also available when {mainprogram} is expanded. +%%# In {mainprogram} also the following functions are useful: +%%# +%%# \varindexFormat +%%# This macro expands to the actual format string which is used. +%%# The main purpose of {mainprogram} will usually be to (re)define +%%# this macro. After {mainprogram} has been called, this macro is +%%# modified in several ways: +%%# 1. \varindexFormat is expanded (with \varindexedef, see below). +%%# (thus, \varindexFormat is expanded BEFORE AND AFTER the call +%%# of {mainprogram}). +%%# 2. \ifvarindexStar is true (see below) a `*' resp. `* ' is prepended. +%%# 3. If it is only "*", it is replaced by "* ". +%%# Note that before execution of {mainprogram}, no tests on the +%%# validity of the format are done: You may use your own symbols to +%%# `communicate' with {mainprogram} (if {mainprogram} eliminates these +%%# symbols afterwards). +%%# +%%# \varindexFormatDefault +%%# This macro expands to formatA resp format*A (in the expanded form) +%%# depending whether the * flag has been used in the call. +%%# Note that this expansion was executed BEFORE the optional format +%%# argument is expanded for the first time. +%%# +%%# \ifvarindexStar ifpart [ \else elsepart] \fi +%%# If the optional * was given, the ifpart is executed, otherwise the +%%# else-part. This is a TeX-if-command. In particular, by +%%# \varindexStarfalse resp. \varindexStartrue +%%# you may change the behavior for future if's. This can be used +%%# to prevent/force that a `*' resp. `* ' is prepended to the format +%%# after the execution of {mainprogram}. +%%# Setting of this variable has no effect in {scanprogram} +%%# +%%# \ifvarindexExplicitFormat +%%# This is a TeX-if-command (see above) which is true if the optional +%%# format argument [formatB] was given. +%%# +%%# +%%# To "compose" the format, you may want to use the macros +%%# +%%# \toolboxDef\macrotodefine{argumentlist} +%%# \toolboxAppend\macrotoappend{argumentlist} +%%# \varindexedef\macrotodefine{argumentlist} +%%# +%%# All commands work similar to \def resp. \edef with two differences: +%%# +%%# For \toolboxDef\macro the argumentlist is expanded precisely by one level +%%# (for details, see the documentation of the toolbox package). +%%# Of course, for \toolboxAppend, the new definition is appended to the old +%%# definition of \macro. +%%# +%%# \varindexedef fully expands argumentlist. However, some active symbols +%%# (currently only ~, but additional symbols might follow in a future release) +%%# are deactivated before expansion, so that ~ actually expands to ~ and not +%%# to a strange command sequence. +%%# +%%# +%%# To "decompose" the format, you may want to use one of the macros +%%# +%%# \toolboxSplitAt{arg}{critical}{\before}{\after} +%%# \toolboxMakeSplit{critical}{command} resp. +%%# \varindexMakeSplitExpand{\MacrosWhichExpandToCritical}{command} +%%# \varindexMakeVarSplit\variable{\MacrosWhichExpandToCritical}{command} +%%# +%%# The first two macros are described in the toolbox package. +%%# The remaining two macros are similar to \varindexMakeSplit with the +%%# difference that the argument {critical} is obtained by expanding +%%# \MacrosWhichExpandToCritical with the aid of \varindexedef. +%%# In the last form, additionally \variable is (re)defined to expand to +%%# the value of critical. +%%# +%%# The following instances of a command created by \toolboxMakeSplit +%%# exist (the content of "critical" should be obvious): +%%# +%%# \varindexSplitAtIndex (generated by \varindexSetIndexString) +%%# \varindexSplitAtOutput +%%# \varindexSplitAtTildeA +%%# \varindexSplitAtTildeB +%%# \varindexSplitAtSpace <- Here the default content of "critical" is "_" +%%# \varindexSplitAtSpaceTok<- Here the default content of "critical" is "s" +%%# \varindexSplitAtOmit +%%# \varindexSplitAtComma +%%# \varindexSplitAtDash +%%# \varindexSplitAtExclam +%%# \varindexSplitAtNr?? (here, ?? is the number as a string; use +%%# \csname ....\endcsname to call this macro. Only those numbers are +%%# admissible which have been introduced with \varindexSetStringForNr +%%# (this is the case for 1-10)). +%%# +%%# There is also the instance +%%# \varindexSplitSpace (to be distinguished from \varindexSplitAtSpace) +%%# where "critical" is the space symbol. +%%# +%%# +%%# In addition, you may use the variables +%%# \varindexIndexString +%%# \varindexOutputString +%%# \varindexTildeAString +%%# .... +%%# \varindexNr??String +%%# which expand to the corresponding strings. +%%# +%%# All the previous macros should not be redefined `by hand'. +%%# They are implicitly redefined by the \varindexSet... commands. +%%# +%%# +%%# +%%# +%%# To drop possible braces, use the command +%%# +%%# \toolboxDropBrace\variable +%%# +%%# of the toolbox package. +%%# +%%# +%%# In {scanprogram} you may already want to call \toolboxMakeSplit: +%%# In this way many choices for the tokens are put into {scanprogram}, +%%# and in this sense, you can consider {mainprogram} as `customizable'. +%%# Anyway, the main task of {scanprogram} is to introduce new flags with +%%# +%%# \varindexNewFlag\token\position[program\varindexEndOfFlag] +%%# or +%%# \varindexNewFlag\token\position[\programmacro] +%%# +%%# Here, \position is an (undefined) macro, and \token an arbitrary token. +%%# The [program(macro)] part is optional and is explained later. +%%# If token is entered in the current call of \varindex instead (or in +%%# addition to) the star, then \position is defined to expand to a +%%# (literally) number, namely the (last) position where token was given +%%# inside the "*-argument-list" (counting from 0). For example, if +%%# \varindexNewFlag ,\commapos +%%# \varindexNewFlag -\minuspos +%%# \varindexNewFlag .\pointpos +%%# are used in \programA, then in the call +%%# \varindex(){\programA}{\programB},-**-{} +%%# the variable \commapos will expand in \programB to `0', while +%%# \minuspos will expand to `4' (the last position is taken). Finally, +%%# \pointpos is \undefined (unless you defined \pointpos differently AFTER +%%# the call of \varindexNewFlag; in this case, this is the default). +%%# If \varindexNewFlag is called multiple times with the same token, +%%# only the LAST call with this token takes effect. +%%# +%%# The flags `*' and `1' are introduced in this way with +%%# +%%# \varindexNewFlag *\varindexStarPos +%%# \varindexNewFlag 1\varindexOneEntry +%%# +%%# BEFORE {scanprogram} is executed. This means: +%%# 1. Usually, \varindexStarPos contains the (last) position of `*' +%%# (resp. is undefined). Moreover, if you define \varindexStarPos in +%%# {scanprogram} or in some flag, you get the same effect as if `*' +%%# had been used. +%%# An analogous remark holds for \varindexOneEntry. +%%# 2. If you introduce `*' with \varindexNewFlag, the `*' looses its +%%# original meaning. The same holds for `1'. +%%# +%%# If you have added a [program(macro)] part, this part is expanded +%%# whenever the flag introduced by \token is used in the call of \varindex +%%# (note that it is not excluded that this happens several times within one +%%# call). More precisely, program is expanded AFTER the variable \position has +%%# been set to the corresponding value, so you may already use \position in +%%# the program part. +%%# +%%# IMPORTANT: The last token expanded in program MUST be \varindexEndOfFlag. +%%# This is not nice but has to do with the way TeX parses its arguments. +%%# Also if you use the form \programmacro, the VERY LAST token expanded +%%# must be \varindexEndOfFlag. Even a construction like +%%# \def\myprogrammacro{\ifx.... +%%# \CallSomeMacroWithvarindexEndOfFlagAtTheEnd +%%# \fi +%%# \varindexEndOfFlag} +%%# is forbidden: In \CallSomeMacroWithvarindexEndOfFlagAtTheEnd an error +%%# would occur at the end, since still the tokens \fi\varindexEndOfFlag +%%# are in the tokenlist when EndOfFlag is reached there. +%%# As a workaround, you may e.g. use +%%# \def\myprogrammacro{\ifx... +%%# \def\execute{....\varindexEndOfFlag}% +%%# \else +%%# \def\execute{\varindexEndOfFlag}% +%%# \execute} +%%# +%%# If you use the form [\programmacro], your macro may even read additional +%%# parameters. These parameters are expected in the call of \varindex BEHIND +%%# the flag you have introduced. So you may actually use flags with +%%# parameters. For example, if \scanprogram contains a macro like +%%# \varindexNewFlag -\minuspos[\readpara] +%%# and you have defined +%%# \def\readpara#1{\def\merk{#1}\varindexEndOfFlag} +%%# then the call \varindex(){\scanprogram}{\mainprg}*-{Foo}-{Foo 2}*{Entries} +%%# is admissible, and in mainprogram, \merk will have the value Foo 2. +%%# +%%# If you are more familiar with TeX, you can even allow OPTIONAL arguments +%%# following your flag: The value of the next (non-space) token is at the +%%# call of \programmacro already saved into the variable +%%# \varindexNextToken, +%%# so you can just use it to test for e.g. [. In this connection, you may +%%# also want to use the commands +%%# \varindexTestAndExec +%%# \varindexSkipAndExec +%%# Please, see the program text how these commands are applied. + +%%# Since version 2.1 you can also hack in personal extensions of the format +%%# string. To do this, use the command +%%# +%%# \varindexNewFormat\splitcommand{action} +%%# +%%# Here, \splitcommand is a command generated by \toolboxMakeSplit or +%%# friends (preferably by \varindexMakeSplitExpand, because the command should +%%# act on the format string which is expand with \varindexedef). +%%# The string where it splits is the new string you can use +%%# in the format argument after this call. For each +%%# occurrence of the corresponding string in the format argument, +%%# action will be executed. If \splitcommand splits at a string which already +%%# had a previous meaning in the format string (or which is a prefix to +%%# such a string), the old meaning of these tokens in the format string is +%%# overridden. +%%# +%%# Typically, action will contain the following commands: +%%# One action will probably be to output a desired token (sequence) via +%%# +%%# \varindexTokensOut{TextToken}{SortToken} +%%# or +%%# \varindexTokensOutExpand\MacroForTextToken\MacroForSortToken +%%# +%%# In the first form, TextToken resp. SortToken is the token sequence put +%%# into the index or running text respectively into the sort entry of the +%%# index for the corresponding format entry. The second form is similar with +%%# the only difference that the arguments must be single macros which expand +%%# to TextToken and SortToken, respectively. +%%# +%%# The variable \ifvarindexIndexMode can be used to test whether the +%%# output goes into the running text or into the index (i.e. whether a `*' +%%# preceeded the current entry). For output into the text, SortToken is +%%# ignored, of course). +%%# +%%# Another action in \varindexNewFormat will probably be to take care of the +%%# magic space flags. This is achieved by a call to \varindexNextSpace or +%%# \varindexNoNextSpace (or separately via \varindexSpaceTexttrue/false resp. +%%# \varindexSpaceTexttrue/false); see the earlier description. +%%# The magic space flags are taken into account in "\varindexTokensOut". +%%# Thus, if you want to ignore the previous flag for some reason you should +%%# set them correspondingly before this call. +%%# However, after the call you should also set them correspondingly for +%%# further processing. +%%# +%%# Example: +%%# \varindexMakeSplitExpand{:}{splitAtColon} +%%# \varindexNewFormat\splitAtColon{% +%%# \varindexNoNextSpace +%%# \ifvarindexIndexMode +%%# \varindexTokensOut{:}{}\varindexSpaceTexttrue +%%# \else +%%# \varindexTokensOut{---}{}\varindexNoNextSpace +%%# \fi} +%%# +%%# defines a new format entry `:' which has the meaning that a colon +%%# (automagically followed by a space) is put into the index but not into +%%# the sort entry. Moreover, in the running text, the colon appears as a +%%# long dash with no space followed. In any case, there is no magic space +%%# output in front of the colon. +%%# + +%%# As an alternative action in \varindexNewFormat, you can also call the +%%# default commands for the format entries. The corresponding macros are +%%# +%%# \varindexAddSpace _ +%%# \varindexAddSpTok s +%%# \varindexAddOmit . +%%# \varindexAddDash - +%%# \varindexAddComma , +%%# \varindexAddExclam ! +%%# \varindexAddTildeA ~ +%%# \varindexAddTildeB = +%%# \varindexAddNumber{number} 0-9 (the argument is 1-...) +%%# +%%# The precise meaning of these macros is intentionally NOT documented, +%%# because some details or side effects might change in a future release of +%%# "varindex". But just for this reason, it might be advantageous to use the +%%# above macros instead of writing personal substitutes which may fail to +%%# have such side effects. +%%# +%%# Example: +%%# \varindexMakeSplitExpand{~-}{splitPhrase}% It is important to expand +%%# % (to have correct ~ catcode) +%%# \varindexNewFormat\splitPhrase{% +%%# \varindexAddTildeA +%%# \let\remember\varindexPreceedsDash +%%# \let\varindexPreceedsDash\toolboxEmpty +%%# \varindexAddDash +%%# \let\varindexPreceedsDash\remember} +%%# +%%# After the above command, "~" and "-" have their usual meaning in +%%# the format string except when they follow immediately in the form "~-". +%%# In this case, the behavior of "-" changes as if \varindexPreceedsDash +%%# were empty (which has the effect that the output looks like "~ -" instead +%%# of "~-". +%%# Note that although "~" is a prefix to "~-", the converse is not true: +%%# Thus, the above command does not change the previous meaning of "~" +%%# (and of course also not of "-"). + +%%# +%%# Some hack: +%%# Tex ignores leading spaces in the argument list of a `normal' macro. +%%# This has the effect that you should be able to insert spaces BETWEEN any +%%# of your arguments without any trouble. +%%# If this does not work the expected way, you can use the command +%%# +%%# \let\varindexArgumentSpace\varindexSkipTricky +%%# +%%# which implements an own macro which does this task. Sadly, this can only +%%# be done with some catcode trickery which in turn might bring you in trouble +%%# with some (VERY) exotic packages. You can restore the default with +%%# +%%# \let\varindexArgumentSpace\varindexSkipDefault +%%# +%%# +%%# All above custamization commands/variables may be used anytime between +%%# two \varindex calls. They take effect with the next \varindex call. + + + +%%# The macros \varindextwoScan and \varindextwo are considered as a +%%# (very useful) EXAMPLE for the customization of the \varindex command. +%%# If you need further customization, have a look at their definition first. + +% This is the end of the ascii documentation +% +%\fi\catcode\#6\relax +% +% \iffalse +%<*metainfo> +% \fi + +% \def\basename{varindex} + +%% \CharacterTable +%% {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z +%% Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z +%% Digits \0\1\2\3\4\5\6\7\8\9 +%% Exclamation \! Double quote \" Hash (number) \# +%% Dollar \$ Percent \% Ampersand \& +%% Acute accent \' Left paren \( Right paren \) +%% Asterisk \* Plus \+ Comma \, +%% Minus \- Point \. Solidus \/ +%% Colon \: Semicolon \; Less than \< +%% Equals \= Greater than \> Question mark \? +%% Commercial at \@ Left bracket \[ Backslash \\ +%% Right bracket \] Circumflex \^ Underscore \_ +%% Grave accent \` Left brace \{ Vertical bar \| +%% Right brace \} Tilde \~} + +% \CheckSum{2042} + +% \iffalse +% \RecordChanges +% \fi +% \def\mypar{} +% \def\ChangesTab{}\let\orichanges\changes +% \def\changes#1#2#3{\orichanges{#1}{#2}{#3}% +% \expandafter\def\expandafter\ChangesTab\expandafter{\ChangesTab +% \item[v#1 {\mdseries(\emph{#2})}] {#3.}}} +% \newcommand{\cmdcite}[1]{\texttt{\textbackslash#1}} + +% \changes{2.3}{2013/11/26}{Update email, add license. Date/version remains the +% same since only commments and documentation are modified} +% \changes{2.3}{2001/05/06}{Introduced new macros \cmdcite{varindexIndex}, +% \cmdcite{varindexDoConvert}, \cmdcite{varindexNoConvert}. +% The layout of the documentation was slightly improved. +% Moreover, a completely new section was added (on +% \cmdcite{toolboxMakeDef}).\mypar +% Use \cmdcite{typeout} instead of \cmdcite{message}, +% but provide a workaround for plain \TeX. Avoid error with +% plain \TeX\ and \LaTeX 2.09 (because \cmdcite{newcount} is +% defined there as \cmdcite{outer} which is rather annoying). +% Since \texttt{toolbox} works around this problem, finally also +% the local \cmdcite{if}'s now actually \emph{are} local} +% \changes{2.2}{2001/05/01}{Introduced \texttt{=:\^} flags into +% \cmdcite{varindextwo}. Changed sorting of entries +% starting with ``\texttt{-}'' +% (see \cmdcite{varindexOutSortDashBeg}).\mypar +% Improved documentation, in particular of \cmdcite{varindextwo} +% and \cmdcite{varindexNewFormat}. +% Also new examples were added for both commands} +% \changes{2.1}{2001/04/30}{Finally implemented placeholder replacement +% (\cmdcite{varindexPreviousATexttrue} and friends) such that +% it works also in the expected way with commas.\mypar +% Introduced separated command \cmdcite{varindexCommaExpandtrue} +% which was in earlier versions automatically coupled with +% \cmdcite{varindexCommaLeadstrue}. Changed the default of both +% values to `true'.\mypar +% Introduced \cmdcite{varindexOutText...} and friends and enabled +% a hook into the format string processing via +% \cmdcite{varindexNewFormat}.\mypar +% Reordered documentation such that the more interesting +% customization parts are now mentioned earlier} +% \changes{1.21}{2001/03/29}{Divided package into two: Many macros which are +% of independent interest have been put into the \texttt{toolbox} +% package. For the user visible is that the macros are now called +% e.\,g.\ \cmdcite{toolboxMakeSplit} instead of +% \cmdcite{varindexMakeSplit}. For backward compatibility, +% the old (now obsolete) names are still available, although not +% documented anymore} +% \changes{1.20}{2001/01/13}{Changed \cmdcite{varindextwo}: +% Added the \cmdcite{varindextwoCommaTilde} functionality and the +% corresponding three flags \texttt{?!/}. Moreover, changed the +% default to \cmdcite{varindextwoCommaTildetrue}. Note that due to +% this change the generated index entries may differ from those +% of earlier versions. To get a backward compatible output, +% you have to use \cmdcite{varindextwoCommaTildefalse}.\mypar +% Also use now the symbols \texttt{`} and \texttt{'} +% instead of the (now obsolete) \texttt{P} and \texttt{p} flags. +% The reason for the latter is that \texttt{P} and \texttt{p} +% could not be used immediately after a command without a space} +% \changes{1.19}{2000/12/07}{Eliminated a bug in the \texttt{P} flag} +% \changes{1.18}{2000/11/30}{Eliminated a bug in \cmdcite{SkipTricky}} +% \changes{1.17}{2000/11/21}{\cmdcite{varindexNr??String} is now defined +% as documented} +% \changes{1.16}{2000/11/19}{Documentation rewritten +% for doc and docstrip utilities (required files are now +% \texttt{varindex.dtx} and \texttt{varindex.ins})} +% \changes{1.15}{2000/10/10}{Fixed harmless bug which always caused a warning} +% \changes{1.14}{2000/06/01}{First version released into public +% (as \texttt{varindex.sty})} +% +% \iffalse +% +% The following part is the code needed to compile the documentation. +% We do some trickery here, because we want that this file here could be used +% for *both*: Compiling the documentation *and* as `varindex.sty' +% (if really required). +% Everything between the lines %<*driver> and % +% goes to the file `varindex.tex'. +% +% \fi +\ifcat @a% If this test is positive, then `@' has letter catcode which means +% that this file is loaded as a style file (or as described in the +% install section of the documentation). +\def\TemporaryDummy{} +\else\long\def\TemporaryDummy{% +% +% +% \iffalse +% +%<*driver> +\documentclass{ltxdoc} +\OnlyDescription%% Comment this out, or +%%\AlsoImplementation%% uncomment this line, if you want to see the source. + +%% If you want an index, uncomment one of the following lines. +%% After running latex a first time, you have to use +%% makeindex -s gind.ist varindex +%% Then run latex again. +%%\CodelineIndex% comment this out if you want an index referring to codelines +%%\PageIndex% comment this out if you want an index referring to pages +%%\OldMakeindex% uncomment this line, if your MakeIndex is pre-v2.9 + +\setlength\hfuzz{15pt} +\hbadness=7000 +\begin{document} +\DocInput{varindex.dtx} +\end{document} +% +%<*metainfo> +% \fi +} +\fi\TemporaryDummy\let\TemporaryDummy\undefined +% +% \iffalse +% Personal macros used for the doc utility: +% \fi +% \MakeShortVerb{"} +% \def\bracemeta#1{\texttt{\{}\meta{#1}\texttt{\}}} +% \def\nocomment{} +% \def\myspace{\texttt{\textvisiblespace}} +% \parindent0pt + +% +% \newenvironment{myquote}{\begin{quote}\begin{raggedright}\relax +%}{\end{raggedright}\end{quote}} +% \newenvironment{myindex}{\begin{myquote}}{\end{myquote}} +% \def\myi{\par\hangindent 40pt\relax} +% \def\mys{\myi\hspace*{20pt}} +% \def\myss{\myi\hspace*{30pt}} +% \def\pnoa#1{, #1} +% \def\pno{\pnoa{17}} +% \def\mysee#1{\pnoa{\emph{see also} #1}} +% \def\sortedlike#1{\hspace*{10pt}(\emph{sorted like} #1)} +% \def\sortedlikeq#1{\sortedlike{``#1''}} +% \def\proz{\texttt{\%}} +% \def\ppari{\proz\\\hspace*{20pt}} +% \def\pari{\\\hspace*{20pt}} +% \def\myquad{\mbox{$\qquad$}} +% \def\macrott#1{{\mdseries\cmdcite{#1}}} + +% \sloppy +% \title{The \texttt{varindex} package\thanks +% {This package has version number \fileversion{}, last revised \filedate. +% The package may be distributed and/or modified under the conditions of the +% LaTeX Project Public License, either version 1.3c of this license or (at +% your option) any later version. The latest version of this license is in +% \texttt{http://www.latex-project.org/lppl.txt}, and version 1.3c or later +% is part of all distributions of LaTeX version 2005/12/01 or later.}} +% \author{Martin V\"ath\thanks{This package bases on ideas of +% \texttt{indextwo.sty} which was written jointly with +% O.~Karch \texttt{karch@informatik.uni-wuerzburg.de} and +% H.-C.~Wirth \texttt{wirth@informatik.uni-wuerzburg.de}}\\ +% {\texttt{martin@mvath.de}}} +% \date{\docdate} +% \maketitle + +% \begin{abstract} +% This \LaTeX\ package provides a luxury front-end for the "\index" command. +% For example, it allows to generate multiple \index entries in +% almost any form by a single command. It is extremely customizable, and works +% with all versions of \LaTeX\ and probably most other \TeX\ formats, too. +% \end{abstract} + +% You may copy this package freely, as long as you distribute only unmodified +% and complete versions. + +% \tableofcontents + +% \section{Changes} +% +% \begin{description} +% \def\mypar{\par}\ChangesTab +% \end{description} +% + +% \section{Introduction} +% +% If you have to write an index for a larger scientific text, you will probably +% sooner or later have the problem that you want to put certain texts into the +% index which consist of more than one word like \emph{Theorem of Picard}. +% \par +% There are several reasonable ways how one might do this: One might put the +% text "Theorem of Picard" in the index, or "Picard theorem". +% An alternative way is "Picard, Theorem", or "Picard's Theorem" +% or "Theorem!Picard" +% (here, "!" is the symbol used by "makeindex" to separate a +% subindex, i.\,e.\ the output will actually look like +% \begin{myindex} +% \myi Theorem +% \mys Picard\pno +% \end{myindex} +% This is useful if one also has other entries starting with \emph{Theorem}). +% Several other natural alternatives are also possible. +% \par +% One may choose some or all of the above alternatives and then code them into +% \TeX. However, if more than one of these alternatives is desired in the +% index, this requires several "\index" commands (which are similar but not +% identical). Moreover, if later another choice of the above alternatives +% is required, the index entries must be completely rewritten. +% This rewriting may be very cumbersome if one makes use of subindices +% for two reasons. +% \par +% First, it may happen that one has to change even entries which are +% apparently not affected. For example, assume there were just two subindices +% for the index entry \emph{Theorem}, namely "Theorem!Picard" and +% "Theorem!Riemann". If the theorem of Picard is eliminated from the main +% text, one not only has to delete the entry "Theorem!Picard": The single +% subindex "Theorem!Riemann" does not make much sense -- one should replace +% it by "Theorem, Riemann". One could write a program to do this task +% automatically, but my experience shows that it is better to do such things +% by hand, because there are some situations where exceptions are desirable. +% \par +% However, things become really cumbersome, if one also has to sort the +% entries in a different way than they are written. For example, suppose +% that instead of \emph{Theorem} in the above example, one has the text +% \emph{$\zeta$-function} which one wants to have sorted like +% \emph{zeta-function}. In this case, the "\index" +% command must be changed from +% \begin{verbatim} +% \index{zeta-function@$\zeta$-function!Riemann}\end{verbatim} +% +% into +% \begin{verbatim} +% \index{zeta-function, Riemann@$\zeta$-function, Riemann}\end{verbatim} +% +% which is rather different! +% \par +% Moreover, one may also want to have a placeholder. For example, instead of +% generating the entries +% \begin{myindex} +% \myi Theorem +% \mys Liouville\pno +% \mys Open Mapping\pno +% \mys Picard\pno +% \end{myindex} +% One might like to have entries like +% \begin{myindex} +% \myi Theorem +% \mys $\sim$ of Liouville\pno +% \mys Open Mapping $\sim$\pno +% \mys $\sim$ of Picard\pno +% \end{myindex} +% One might use the symbol "$\sim$" for the placeholder, but this needs of +% course its own sort entry in the "\index" command (in the above example, +% we sorted by \emph{Liouville}, \emph{Open Mapping}, and \emph{Picard}, +% respectively, which is perhaps the most natural choice). +% \par +% With the package "varindex" it is rather simple to generate any of the +% above "\index" entries, and it is easy to modify them, e.\,g.\ the above +% placeholders can be introduced easily and then activated or deactivated by +% a switch. Moreover, several "\index" entries like "Picard, Theorem of" +% and "Theorem of Picard" can be generated simultaneously with a +% \emph{single} command (i.\,e.\ you have to write the phrase +% "Theorem of Picard" only once). In addition, it is also possible to produce +% not only corresponding "\index" commands but also to output the content +% into the running text. +% \par +% Since my experience shows that in each new book there arise new special cases +% for the "\index" command, I was trying to provide a +% \emph{highly customizable} solution which can be modified for all +% needs (I hope). + +% \section{Installation} +% +% This package was tested with \LaTeX 2.09 and \LaTeXe\ and should work +% with all other (future) versions of \LaTeX\ and friends, too. +% It should even run with other (non-\LaTeX) formats if an "\index" command +% (with \LaTeX-Syntax) is provided. +% +% To use ``varindex'', you have to put the file "varindex.sty" in a path where +% \TeX\ looks for its input files. You must also have the file "toolbox.sty" +% of the ``toolbox'' package in your path (toolbox~v3.1 or newer is required). +% The \TeX\ documents using varindex need the +% following modifications in their header: +% +% \begin{itemize} +% \item If you use \LaTeXe, put in the preamble the command +% \begin{verbatim} +% \usepackage{varindex}\end{verbatim} +% +% \item If you use \LaTeX 2.09, use "varindex" as a style option, e.\,g.\ +% \begin{verbatim} +% \documentstyle[varindex]{article}\end{verbatim} +% or +% \begin{verbatim} +% \documentstyle[varindex,12pt]{article}\end{verbatim} +% +% \item If you use some other (non-\LaTeX) format, you will probably have to +% insert a line like +% \begin{verbatim} +% \catcode`\@=11\relax\input varindex.sty\catcode`\@=12\relax\end{verbatim} +% +% \end{itemize} +% +% For \TeX\ insiders: \LaTeX-specific commands used in "varindex.sty" are only: +% +% \begin{itemize} +% \item "\makeatother" +% \item "\makeatletter" +% \item "\typeout" +% \item "\RequirePackage" +% \item "\newcommand" (used only in the form "\newcommand{"\meta{command}"}{}" +% to ensure that \meta{command} was not defined before) +% \item "\ProvidesPackage" +% \end{itemize} +% The above commands are used only if they are defined (otherwise, +% natural substitutes are used ("\newcommand" and "\ProvidesPackage" are +% then not used at all)).\bigskip + +% \section{Additional hint} +% +% Although this package provides a convenient way to write "\index" commands, +% this may not be sufficient: Also with this package, the "\index" commands +% may still be rather complex. For some books, it might be necessary to write +% the same "\index" entries several times (to get various page numbers). +% The first idea that one might have in this case is to define a list of the +% used "\index" commands near the beginning of the document e.\,g.\ as: +% \begin{verbatim} +% \newcommand{\Index}{\varindex(){\varindextwoScan}{\varindextwo}[]} +% \newcommand{\Riemann}{\Index{Riemann Stieltjes integral}[1-23 2,1-~3 3!1-2~]} +% \newcommand{\sigmaa}{\Index-={$\sigma$@sigma algebra}}\end{verbatim} +% (the first line and the usage of "\Index" is explained in later sections; +% here, it is sufficient to know that "\Index" produces in the above form +% several "\index" entries). +% To produce the corresponding "\index" entries in the +% running text, one then just needs to use "\Riemann" resp.\ "\sigmaa". +% However, this method has some disadvantages: +% \begin{enumerate} +% \item If one has many "\index" entries, it is easy to forget that e.\,g.\ +% "\sigmaa" is a command which should produce an index entry. +% Then "\sigmaa" in the main text might be rather confusing. +% \item One has to take care of macros already provided by \TeX, \LaTeX\ or +% some packages. For example, it is not possible to use the name +% "\sigma" for the above purpose. +% \end{enumerate} +% To avoid these problems, one may be very disciplinary and call the +% involved macros systematically e.\,g.\ "\IndexRiemann" "\Indexsigmaa" etc. +% However, this produces terrible long and unreadable macro names in the main +% text.\par +% The "toolbox" package (version 3.1 or newer) provides a more convenient +% solution: You can use the command +% \begin{verbatim} +% \newcommand{\Index}{\varindex(){\varindextwoScan}{\varindextwo}[]} +% \toolboxMakeDef{Idx}{#1}\end{verbatim} +% and afterwards +% \begin{verbatim} +% \NewIdx{R-S}{\Index{Riemann Stieltjes integral}[1-23 2,1-~3 3!1-2~]} +% \NewIdx{sigma-algebra}{\Index-={$\sigma$@sigma algebra}}\end{verbatim} +% After these definitions, you can use the intuitive commands +% "\Idx{R-S}" and "\Idx{sigma-algebra}" to produce the corresponding +% index entries.\par +% Note also the symbol ``-'' in the above names which is usually not allowed +% in \TeX\ macros.\par +% +% If several page numbers occur for one index entry, it may be convenient for +% the reader if the ``main page number(s)'' (e.\,g.\ the place(s) +% where the corresponding notion is defined) is written in a different style. +% Of course, this is supported by "\varindex" (as explained later). To use this +% feature in connection with "\toolboxMakeDef", there are several +% possibilities. A straightforward way is to add in addition to the above +% commands also +% \begin{verbatim} +% \NewIdx{R-S*}{\Index[|textbf]% +% {Riemann Stieltjes integral}[1-23 2,1-~3 3!1-2~]} +% \NewIdx{sigma-algebra*}{\Index[|textbf]% +% -={$\sigma$@sigma algebra}}\end{verbatim} +% Then "\Idx{R-S*}" and "\Idx{sigma-algebra*}" produce index entries +% with boldface page numbers. Of course, you can automatize the task of +% generating macros which produce normal and boldface page numbers +% e.\,g.\ as follows: +% \begin{verbatim} +% \newcommand{\Index}{\varindex(){\varindextwoScan}{\varindextwo}[]} +% \toolboxMakeDef{Idx}{#1} +% \newcommand{\MakeIdx}[2]{% +% \NewIdx{#1}{\Index#2}% +% \NewIdx{#1*}{\Index[|textbf]#2}} +% +% \MakeIdx{R-S}{{Riemann Stieltjes integral}[1-23 2,1-~3 3!1-2~]} +% \MakeIdx{sigma-algebra}{-={$\sigma$@sigma algebra}}\end{verbatim} +% This provides the commands "\Idx{R-S}" "\Idx{R-S*}" +% "\Idx{sigma-algebra}" and "\Idx{sigma-algebra*}" with the same functionality +% as explained before.\par +% +% The above approach has the disadvantage that the names ``$\ldots$"*"'' have +% automatically a fixed meaning. Alternatively, you can also generate different +% main commands. This is immediately supported by "\toolboxMakDef": +% \begin{verbatim} +% \newcommand{\Index}{\varindex(){\varindextwoScan}{\varindextwo}[]} +% \toolboxMakeDef{Idx}{\Index#1} +% \toolboxMakeDef{IdxMain}{\Index[|textbf]#1} +% +% \NewIdx{R-S}{{Riemann Stieltjes integral}[1-23 2,1-~3 3!1-2~]} +% \NewIdxMain{R-S}{% +% {Riemann Stieltjes integral}[1-23 2,1-~3 3!1-2~]}\end{verbatim} +% Now you can use "\Idx{R-S}" and "\IdxMain{R-S}" to produce the +% normal respectively boldface page numbers. Of course, you can also automatize +% in this case the task of generating these commands: +% \begin{verbatim} +% \newcommand{\Index}{\varindex(){\varindextwoScan}{\varindextwo}[]} +% \toolboxMakeDef{Idx}{\Index#1} +% \toolboxMakeDef{IdxMain}{\Index[|textbf]#1} +% \newcommand{\NewIdxBoth}[2]{% +% \NewIdx{#1}{#2}% +% \NewIdxMain{#1}{#2}} +% +% \NewIdxBoth{R-S}{{Riemann Stieltjes integral}[1-23 2,1-~3 3!1-2~]} +% \NewIdxBoth{sigma-algebra}{-={$\sigma$@sigma algebra}}\end{verbatim} +% After the above commands, you can use "\Idx{R-S}", "\IdxMain{R-S}", +% "\Idx{sigma-algebra}" and "\IdxMain{sigma-algebra}" with their obvious +% meaning.\par\bigskip +% +% \textbf{Summarizing}: The last of the above solutions is the one which +% I recommend.\par\bigskip +% +% For further possibilities of the "\toolboxMakeDef" command (like making +% copies of entries, redefining entries, etc.), please read the +% original documentation of the "toolbox" package. + +% \section{Examples} +% +% Probably you are very impatient and want to see some examples. +% So, here you are -- but be warned that the examples are not explained in +% detail. You have to read the later sections to understand more precisely +% why the examples work the way they do. +% \par +% Since the "\varindex" command is highly customizable, +% the following examples can only give you a rough impression of what +% you can actually do with it. +% +% \subsection{Typical example of usage (using the \texttt{varindextwo} macros)} +% \label{s:firstex} +% +% Suppose the following customization of the "\varindex" command was defined: +% \begin{verbatim} +% \def\Index{\varindex(){\varindextwoScan}{\varindextwo}[\emph]}\end{verbatim} +% +% Since we used the "varindextwo" macros here, by default +% \emph{two} "\index" entries are generated with a single command. +% After the above definition, the command +% \begin{verbatim} +% \Index{ring with $1$@one}\end{verbatim} +% +% will produces the "\index" entries for: +% +% \begin{myindex} +% \myi ring +% \mys $\sim$ with $1$\pno\sortedlikeq{with one} +% \myi $1$\sortedlikeq{one} +% \mys ring with $\sim$\pno\sortedlike +% {``ring with'' (without \mbox{``$\sim$''!})} +% \end{myindex} +% +% One of the examples of the introduction can be generated with +% \begin{verbatim} +% \Index*{Theorem of@ Picard}\end{verbatim} +% which produces the two "\index" entries for +% +% \begin{myindex} +% \myi Theorem +% \mys $\sim$ of Picard\pno\sortedlikeq{Picard} +% \myi Picard +% \mys Theorem of $\sim$\pno\sortedlikeq{Theorem} +% \end{myindex} +% In this example, the word "of" is ignored for the sorting, because we put +% the symbol "@"\meta{nothing} behind it which means that it should be sorted +% as the empty string (in cases like this, also the space in front of "Picard" +% is automatically ignored for the sort entry). +% +% Since we used in the above example the form "\Index*" instead of "\Index", +% additionally the text "\emph{Theorem of Picard}" is output into the running +% text (the string "\emph" stems from our customization of "\Index" defined +% in the beginning). +% \bigskip +% +% \emph{Completely} different entries may be generated by your own rules. +% To this end, an optional parameter "["\meta{format}"]" can be appended. +% Internally, the main argument is splitted into words which are numbered +% $1,2,\ldots$; in \meta{format}, you can refer to these words simply +% by using the corresponding numbers. An ``empty'' entry in \meta{format} +% means all words in the original order (i.\,e.\ it is essentially equivalent +% to $12345\ldots$). Some other symbols besides numbers are also allowed +% which are listed later. +% +% \begin{verbatim*} +%\Index{Hausdorff measure of noncompactness}[4,23 2!~34!1= ]\end{verbatim*} +% generates \emph{three} index entries: +% +% \begin{myindex} +% \myi noncompactness, measure of\pno +% \myi measure +% \mys $\sim$ of noncompactness +% \myss Hausdorff $\approx$\pno +% \myi Hausdorff measure of noncompactness\pno +% \end{myindex} +% +% The last of these entries occurs only, because the last character in +% the \meta{format} argument "[4,23"\myspace"2!~34!1="\myspace"]" is a space +% (the space following "=" tells "varindex" that another (empty) entry is +% desired). +% \par +% +% If you want only slight modification(s) of the default, you need also just +% slight modification(s) of the command, e.\,g. +% \begin{verbatim} +% \Index*,{ring with $1$@one}\end{verbatim} +% +% has the same effect as in our earlier example, +% just that the second entry reads +% +% \begin{myindex} +% \myi $1$, ring with $\sim$\pno\sortedlikeq{one, ring with} +% \end{myindex} +% Moreover, since the `"*"' occurred in the previous command, additionally +% +% \begin{verbatim} +% \emph{ring with $1$}\end{verbatim} +% +% appears in the running text. Praxis shows that changes in the entries as +% above have to be made frequently in the `fine tuning' of the index of a +% book. Note that with the original "\index", the command would have to be +% changed completely for the above entries, because we have a ``sort'' entry +% for which a different rule applies if we use a subitem (``"!"'') +% instead of a ``","\myspace''. +% (BTW: "\varindex" produces sort entries only if they are necessary). +% \par +% +% Of course, you may combine the default with your own format: +% \begin{verbatim*}\Index{internal integrable function}[23,1~ +]\end{verbatim*} +% +% generates +% \begin{myindex} +% \myi internal function, integrable $\sim$\pno +% \myi internal +% \mys $\sim$ integrable function\pno +% \myi function +% \mys internal integrable $\sim$\pno +% \end{myindex} +% In this example, the first entry is generated by the symbols "23,1~" in the +% \meta{format} argument, and the last two entries are those entries which +% would have been generated by the "varindextwo" macros if no \meta{format} +% argument had been given -- the magic symbol "+" instructs the "varindextwo" +% macros to not suppress these entries. +% +% +% \subsection{A simple example without the \texttt{varindextwo} macros} +% +% As known from "\index", a "|see{...}" can be used to produce a reference to +% another index entry instead of a page number. Such a command may optionally +% be appended. +% \begin{verbatim*} +%\varindex*{topology of a normed space}{5!4~!1= 45,12}[|see{norm}] +%\end{verbatim*} +% \begin{myindex} +% \myi space +% \mys normed $\sim$ +% \myss topology $\approx$\mysee{norm} +% \myi normed space, topology of\mysee{norm} +% \end{myindex} +% (the precise appearance of ``\emph{see also} '' depends on how the "\see" +% macro is defined in your style). The above command additionally inserts the +% tokens "{topology of a normed space}" into the running text (this would not +% happen if "\varindex" is used in place of "\varindex*"). +% Only in the first of the above entries, an `"@"' part will be added to the +% "*.idx" file: This entry is sorted as if ``\myspace$\sim$'' resp.\ +% ``\myspace$\approx$'' would not exist. +% +% +% \subsection{Another example without the \texttt{varindextwo} macros} +% +% The appearance of the cited page number and the appearance in the +% running text (only available with ``"*"'') can be customized easily. +% +% \begin{verbatim} +% \varindex[\emph][|textbf]% +% {$\sigma$@sigma!$(\sigma-)$ finite {measure space}}% +% {*1.23 23 23,1- 1-23}\end{verbatim} +% +% generates the three index entries +% \begin{myindex} +% \myi finite measure space\pnoa{\textbf{42}} +% \myi finite measure space, $\sigma$-\pnoa{\textbf{42}}\sortedlikeq +% {finite measure space, \mbox{sigma-}} +% \myi $\sigma$-finite measure space\pnoa{\textbf{42}}\sortedlikeq +% {sigma-finite measure space} +% \end{myindex} +% In all three entries the pages are printed using "\textbf". +% Moreover, the tokens +% \begin{verbatim} +% \emph{($\sigma$-)finite measure space}\end{verbatim} +% +% are put into the running text. +% +% \subsection{A simple example using a flag +% (without the \texttt{varindextwo} macros)} +% +% Note the token "1" in the following command: +% \begin{verbatim} +% \varindex1{$L$ and $M$@L and M}{}\end{verbatim} +% +% This command generates the index entry +% \begin{myindex} +% \myi $L$ and $M$\pno\sortedlikeq{L and M} +% \end{myindex} +% With the command +% \begin{verbatim} +% \varindex1*{$L$ and $M$@L and M}{}\end{verbatim} +% or +% \begin{verbatim} +% \varindex*1{$L$ and $M$@L and M}{}\end{verbatim} +% +% additionally, "{$L$ and $M$}" is output into the running text. +% +% Note that without the `"1"', the index generated were +% \begin{myindex} +% \myi "$L$ and $M$ and M"\pno\sortedlikeq{"\$L\$ and L and M"} +% \end{myindex} +% +% \subsection{An example for very primitive customized index commands +% (without the \texttt{varindextwo} macros)} +% +% If you defined your ``default'' shortcuts appropriately, you can still +% override some of your own defaults. +% +% \begin{verbatim} +% \def\myindexA{\varindex[\emph][|textbf]*} +% \def\myindexB{\varindex(){}{}[\emph][|textbf]} +% +% \myindexA{Foo1}{} +% \myindexB{Foo2}[][] +% \myindexB*{Foo3!{Foo 3}}\end{verbatim} +% +% Generates the index entries "Foo1", "Foo2", and "Foo3". Moreover, +% "\emph{Foo1}" and "\emph{Foo 3}" is put into the running text. +% The page number of "Foo 2" in the index is printed normal (i.\,e.\ "|textbf" +% is overridden), the others with "\textbf". Note that by using braces, +% it was possible to include a space into the text "Foo 3". +% +% +% \subsection{An example of a primitive customized index command +% (without the \texttt{varindextwo} macros)}\label{s:myindex} +% +% \TeX\ code can be inserted to customize the default formatting string. +% \begin{verbatim} +% \def\myindex{\varindex(\ifnum\varindexCount=2 1!2 2,1\fi){}{}[\emph]} +% +% \myindex{Foo Bar}\end{verbatim} +% +% generates the index entries +% \begin{myindex} +% \myi Foo +% \mys Bar\pno +% \myi Bar, Foo\pno +% \end{myindex} +% +% \begin{verbatim} +% \myindex*{Foo Bar}\end{verbatim} +% +% generates the same index entries as above and additionally outputs +% "\emph{Foo Bar}" into the running text. +% +% \begin{verbatim} +% \myindex*{other format}[21]\end{verbatim} +% +% generates the index entry +% \begin{myindex} +% \myi format other\pno +% \end{myindex} +% and outputs "\emph{other format}" into the running text. +% +% \begin{verbatim} +% \myindex[|textbf]*{BoBo}\end{verbatim} +% +% generates the index entry +% \begin{myindex} +% \myi BoBo\pnoa{\textbf{42}} +% \end{myindex} +% where the page number is printed with "\textbf". +% Moreover, "\emph{BoBo}" is output into the running text. +% +% \subsection{A primitive varying customized index command +% (without the \texttt{varindextwo} macros)} +% +% \begin{verbatim} +% \def\myindex{\varindex(\ifnum\varindexCount=2 1!2 2,1\fi)% +% (\ifnum\varindexCount=2*2,1 1!2 2,1\fi){}{}[\emph]}\end{verbatim} +% +% With the same commands as in Section~\ref{s:myindex}, the same index entries +% are generated, but the tokens "\emph{Far, Boo}", "\emph{other format}", +% and "\emph{Bobo}" are output into the running text. +% +% +% \subsection{Examples with the \texttt{varindextwo} macros} +% +% As mentioned earlier, if the "varindextwo" macros are used (and if +% the main arguments contains at least two entries), then two +% "\index" entries are generated by default. Roughly speaking, one "\index" +% entry is the argument in its given order and the other is the argument in +% reverse order (this is not precise, but explains the idea).\par +% +% For the following examples, +% we use a similar definition for "\Index" as in Section~\ref{s:firstex}, +% and define an "\iemph" macro which has `"*"' as a default and outputs with +% "\emph". I recommend to put both sort of definitions into the preamble of +% all of your files which should use "varindex" (the names are of course +% subject to your personal taste). +% +% \begin{verbatim} +% \def\Index{\varindex(){\varindextwoScan}{\varindextwo}[]} +% \def\iemph{\varindex(){\varindextwoScan\def\varindexStarPos{}}% +% {\varindextwo}[\emph]}\end{verbatim} +% +% (note that the apparently simpler definition +% \begin{verbatim} +% \def\iemph{\varindex(){\varindextwoScan}{\varindextwo}[\emph]*}\end{verbatim} +% is not as good as the above definition of "\iemph" as is explained below). +% +% After the above customization, you may use the following commands. +% \begin{verbatim} +% \Index*{measure of $\gamma$-noncompactness@gamma-noncompactness!FOO} +% \end{verbatim} +% generates the index entries +% \begin{myindex} +% \myi measure +% \mys $\sim$ of $\gamma$-noncompactness\pno\sortedlikeq +% {of gamma-noncompactness} +% \myi $\gamma$-noncompactness\sortedlike{gamma-noncompactness} +% \mys measure of $\sim$\pno +% \end{myindex} +% and outputs the tokens "{measure of FOO}" into the running text. +% Note the order of the words! +% +% \begin{verbatim} +% \Index*,?_'{flic of flac}\end{verbatim} +% +% generates +% \begin{myindex} +% \myi flic of flac\pno +% \myi flac, flic\pno +% \end{myindex} +% and outputs "{flic of flac}". Here, the two tokens "_" and "," had the +% effect that a space resp.\ ``","\myspace'' was used instead of a subentry +% in the first resp.\ second "\index" entry; the token "'" caused the +% preposition "of" to disappear in the second entry, and the token "?" +% suppressed a trailing $\sim$ in the second entry.\par +% +% A more realistic example is +% \begin{verbatim} +% \Index^={$\sigma$@sigma algebra}\end{verbatim} +% +% which in both entries inserts a ``-'': +% +% \begin{myindex} +% \myi $\sigma$\sortedlikeq{sigma} +% \mys $\sim$-algebra\sortedlike{``algebra'' or ``-algebra'', see below} +% \myi algebra +% \mys $\sigma$-$\sim$\pno\sortedlikeq{sigma-} +% \end{myindex} +% Here, the sorting ``-algebra'' is chosen when you used +% \begin{verbatim} +% \let\varindexOutSortDashBeg\varindexOutSortDash\end{verbatim} +% as described later.\par +% +% The flag "^" in conjunction with "-" has a special meaning: +% \begin{verbatim} +% \Index^->{$\sigma$@sigma algebra}\end{verbatim} +% Then the first entry reads instead (the second is canceled because of ">"): +% +% \begin{myindex} +% \myi $\sigma$-\sortedlikeq{sigma-} +% \mys $\sim$ algebra\pno\sortedlikeq{algebra} +% \end{myindex} +% +% Similarly, the conjunction "^" and "." has a special meaning: +% \begin{verbatim} +% \Index^.,:{ultra filter}\end{verbatim} +% +% generates entries without a space following $\sim$ (and in view of the flag +% "," no new subentry is used for the second entry but instead a ``,''): +% +% \begin{myindex} +% \myi ultra +% \mys $\sim$filter\pno\sortedlike{filter} +% \myi filter, ultra$\sim$\pno\sortedlike{filter, ultra} +% \end{myindex} +% +% For crossreferences, one may use something like +% \begin{verbatim} +% \iemph[|see{recursive recursion}],_{recursive recursion}\end{verbatim} +% +% which generates +% \begin{myindex} +% \myi recursive recursion\mysee{recursive recursion} +% \myi recursion, recursive $\sim$\mysee{recursive recursion} +% \end{myindex} +% and outputs "\emph{recursive recursion}". If we would have used instead the +% definition +% \begin{verbatim} +% \def\iemph{\varindex(){\varindextwoScan}{\varindextwo}[]*}\end{verbatim} +% +% the above call were not possible, since the optional arguments "[|see...]" +% must occur in front of the flag `"*"'. +% +% \begin{verbatim} +% \Index-;*{Flip Flop}\end{verbatim} +% +% generates +% \begin{myindex} +% \myi Flip-Flop\pno +% \myi FlopFlip\pno +% \end{myindex} +% and outputs "{Flip-Flop}" (note that the symbol "-" which is caused by the +% flag "-" occurs also in the output). +% +% One may freely create other entries: +% \begin{verbatim} +% \Index>{Flippy Flop!GO}[*2-1-2 2!1-1 1-12 +]\end{verbatim} +% +% generates +% \begin{myindex} +% \myi Flop +% \mys Flippy-Flippy\pno\qquad\emph{(no ``$\sim$''!)} +% \myi Flippy-Flippy Flop\pno +% \myi Flippy +% \mys $\sim$ Flop\pno +% \end{myindex} +% and outputs "{GO-Flippy-GO}" (note that even without an explicit "*" flag, +% we were able to generate this output, just by using the "*" in +% \meta{format}). +% +% \begin{verbatim} +% \Index*_,{shape {of a} of star}\end{verbatim} +% +% generates +% \begin{myindex} +% \myi shape of a star\pno +% \myi star, shape of $\sim$\pno\sortedlike{star, shape of} +% \end{myindex} +% and outputs "{shape of a star}". Note that for the first entry the +% proposition ``"of a"'' was chosen while for the second entry the +% alternative proposition "of" was chosen. +% +% Also with the "varindextwo" macros the other flags keep their old meaning. +% For example, the flag "1" still means that the main argument is +% considered as a single entry. +% \begin{verbatim} +% \Index1*{$L$ feature@L feature} +% \Index,{No $L$@L feature}\end{verbatim} +% +% generate +% \begin{myindex} +% \myi $L$ feature\pno\sortedlikeq{"L feature"} +% \myi No +% \mys $\sim$ $L$ feature\pno\sortedlikeq{"L feature"} +% \myi feature, No $L$ $\sim$\pno\sortedlikeq{"feature, No L"} +% \end{myindex} +% and outputs "{$L$ feature}". +% +% +% \subsection{Example of a simple modification of the +% \texttt{varindextwo} macros}\label{ss:expatch} +% +% All flags and magic tokens in "varindextwo" can be customized to fit your +% own taste, just by modifying "\varindextwoScan". +% +% \begin{verbatim} +% \def\myindextwoScan{% +% \varindextwoScan +% \varindexNewFlag ~\vxtSpaceA +% \varindexNewFlag 1\vxtSpaceB +% \varindexNewFlag !\varindexOneEntry +% \varindexMakeSplitExpand{/}{vxtSplitAtMagic}% +% \def\varindexStarPos{}% +% } +% \def\myIndex{\varindex(){\myindextwoScan}{\varindextwo}[]}\end{verbatim} +% +% +% "\myIndex" behaves similar to the previous example with +% the following differences: +% \begin{enumerate} +% \item The flag "1" now has the previous meaning of "~". +% \item One may now use "~" and "_" equivalently. +% \item The flag "!" now has the original meaning of the flag "1". +% \item Instead of "+" in the format string, the character "/" has to be used. +% \end{enumerate} + +% +% \section{Main Description} +% +% Without additional customization, there are two possible calls for the +% \DescribeMacro{\varindex}"\varindex" command: +% +% \begin{enumerate} +% \item[a)] The first call has the form +% \begin{myquote} +% "\varindex["\meta{textstyle}"]["\meta{pagestyleA}"]"\meta{flags}\ppari +% \bracemeta{main entries}\bracemeta{format}"["\meta{pagestyleB}"]" +% \end{myquote} +% Here, "["\meta{textstyle}"]", "["\meta{pagestyleA}"]", +% "["\meta{pagestyleB}"]", and \meta{flags} are optional. +% (But if "["\meta{textstyle}"]" is omitted, also "["\meta{pagestyleA}"]" +% must be omitted). +% +% The meaning of the arguments is as follows: +% \begin{description} +% \item[\mdseries\meta{textstyle}] describes the textstyle used for the output +% into the running text (typically, textstyle is "\emph" or empty). +% \item[\mdseries\meta{pagestyle}] describes the pagestyle used for the output +% of the page number (you may also use a construct like "|see{...}" here). +% If "["\meta{pagestyleB}"]" is present, this is the value used. +% Otherwise, the value of "["\meta{pagestyleA}"]" is used +% (resp.\ nothing). +% \item[\mdseries\meta{flags}] can be one (or both) of the following tokens: +% \begin{description} +% \item[\mdseries "*"] If this token appears in \meta{flag}, it has roughly +% the meaning ``Output into running text''. More precisely, if no +% "*" is occurs in \meta{format} (see below), then \meta{format} +% is automatically prepended by the tokens ``"*"\myspace'' resp.\ +% ``"*"'' (depending whether \meta{format} starts with a space +% or not). +% \item[\mdseries "1"] With this flag, the content of \meta{main entries} is +% considered as a single entry (see below). +% \end{description} +% \item[\mdseries\meta{main entries}] and +% \item[\mdseries\meta{format}] are explained later. +% \end{description} +% +% \item[b)] The alternative form to call "\varindex" is +% \begin{myquote} +% "\varindex("\meta{formatA}")("\meta{format*A}")"\relax +% \bracemeta{scan program}\ppari +% \bracemeta{main program}"["\meta{textstyle}"]["\meta{pagestyleA}"]"\relax +%\meta{flags}\ppari +% \bracemeta{main entries}"["\meta{formatB}"]["\meta{pagestyleB}"]" +% \end{myquote} +% The arguments "["\meta{textstyle}"]", "["\meta{pagestyleA}"]", \meta{flags}, +% and "["\meta{pagestyleB}"]" have the same meaning as in a) (in particular, +% they are optional, but if "["\meta{textstyle}"]" is omitted, also +% "["\meta{pagestyleA}"]" must be omitted). +% +% Also "("\meta{format*A}")" and "("\meta{formatA}")" are optional, +% but if "("\meta{formatA}")" is omitted, also "("\meta{format*A}")" +% must be omitted. +% +% The ``default'' value for \meta{format} is \meta{formatA} resp.\ +% \meta{format*A} (depending whether the flag "*" has been used or not). +% If "["\meta{formatB}"]" is given, then this is used as the format (i.\,e.\ +% the optional argument \meta{formatB} can be used to override the default). +% +% The other values are: +% \begin{description} +% \item[\mdseries\meta{scan program}] is executed (i.\,e.\ expanded) +% immediately when "\varindex" reads it. This parameter can be used +% to introduce \emph{further} flags (other than "*" and "1"), see below. +% \item[\mdseries\meta{main program}] is executed \emph{after} the +% \meta{format} string(s) has been expanded. +% \end{description} +% \end{enumerate} +% +% It is recommended to define personal macros which contain all parameters up +% to the place where \meta{flags} occurs (either with or without some flags, +% depending on the intention). See the examples section. +% \bigskip\par +% +% \meta{main entries} is the main argument which has the following form +% +% \begin{myquote} +% \meta{entry1}[\myspace\meta{entry2}][\myspace\meta{entry3}]$\ldots$ +% \end{myquote} +% +% where each of \meta{entry1} \meta{entry2} \meta{entry3} $\ldots$ +% in turn has the form +% \begin{myquote} +% \meta{indextext}"@"\meta{sorttext}"!"\meta{outputtext} +% \end{myquote} +% or +% \begin{myquote} +% \meta{indextext}"!"\meta{outputtext}"@"\meta{sorttext} +% \end{myquote} +% In each of these forms, "@"\meta{sorttext} and "!"\meta{outputtext} +% are optional. Here, +% \begin{description} +% \item[\mdseries\meta{indextext}] +% is the text which is put into the index for the entry +% \item[\mdseries\meta{sorttext}] +% is what is used as a sort criterion for the entry +% \item[\mdseries\meta{outputtext}] +% is what is output into the running text for the entry +% \end{description} +% +% Note that the symbol "@" has in a sense the opposite meaning as in the +% original "\index" command: +% \emph{Before} that symbol, the desired text appears, and +% \emph{after} the symbol the place where it has to be sorted. +% However, we chose the symbols "@" and "!", because these two +% symbols are forbidden anyway (otherwise, "makeindex" will become confused). +% +% As usual, multiple spaces are considered as \emph{one} space and do not +% generate empty ``ghost'' entries. Moreover, a space after a \TeX-command +% like "\LaTeX" is eliminated by \TeX\ and thus also not considered as a +% separator. You may use braces"{"$\ldots$"}" either around a whole entry or +% around \meta{indextext} or \meta{sorttext} or \meta{outputtext} to allow +% spaces which do not act as ``separators'' in the corresponding part. +% The braces around these parts will vanish. In particular, you may generate an +% empty entry with "{}" or "!" or "@" (bordered by spaces). +% If you want that braces occur in the \emph{output}, you have to add an +% additional pair of braces. Be aware that you write sufficiently +% many braces, if you really should need them: For example, +% the command "\varindex{{{{A"\myspace"B}}}}{}" produces the index entry +% "{A"\myspace"B}": The outermost pair of braces is eliminated immediately +% by \TeX. The second pair is eliminated, because this is a pair around a +% complete entry in \meta{main entries}. Finally, another pair is eliminated, +% because it is a brace around \meta{indextext}. +% With the flag `"1"', \meta{main entries} is considered as one single entry. +% Nevertheless, also with this flag, an additional pair of braces around +% \meta{main entry} is eliminated.\bigskip +% +% +% The \meta{format} has one of the following three forms: +% \begin{myquote} +% \meta{IndexA}[\myspace\meta{IndexB}][\myspace\meta{IndexC}]$\ldots$\relax +%["*"\meta{OutputA}]["*"\meta{OutputB}]$\ldots$\\\relax +%["*"\meta{OutputA}][\myspace\meta{IndexA}][\myspace +%\meta{IndexB}]["*"\meta{OutputC}]$\ldots$\\ +% "*" +% \end{myquote} +% where the order of arguments can be arbitrarily mixed (except for the first +% \meta{IndexA} in the first form). \meta{IndexA} \meta{IndexB} $\ldots$ +% \meta{OutputA} $\ldots$ describe the format of the index entries resp.\ +% of the output into the running text. +% The output is generated in the given order (this might be important, if +% a pagebreak occurs during the output into the running text). +% The last case is exceptional and equivalent to ``"*"\myspace''. +% The following characters/strings are allowed in the format entries: +% \par\bigskip +% +% \begin{tabular}[t]{ll} +% token &meaning\\\hline +% "1"--"9"&\meta{entry1}--\meta{entry9}\\ +% "0" &\meta{entry10}\\ +% "~" &a placeholder sign (default is $\sim$)\\ +% "=" &a secondary placeholder sign (default is $\approx$)\\ +% "_" &the space character ``\myspace''\\ +% "s" &The token ``"\space"'' +% (but ``\myspace'' is used for the sort entry)\\ +% "." &No space will follow (see below)\\ +% "," &The character ``","'' (space will follow)\\ +% "-" &The character ``"-"'' (no space will follow)\\ +% "!" &Create a new sublevel (subitem). +% \end{tabular}\par\bigskip +% +% All other tokens in this argument are forbidden. (Note that the magic +% symbol "+" in \meta{format} is handled by the "varindextwo" macros, and +% not by "varindex").\par +% The token ``"!"'' above makes no sense for the output in the running text +% and thus is forbidden behind "*".\par +% +% By a heuristic rule, a space is automatically inserted between two entries +% which generate non-empty text. If the heuristic rule fails, you may always +% force a space by either ``"_"'' or ``"s"'', or forbid a space by ``"."''. +% +% If a format is empty, all entries are taken in the order of input. +% Note that \TeX\ eliminates concatenated spaces, and so you are able to +% produce an empty format entry only at the end of \meta{format} or in front +% of a ``"*"''. If you want to force an empty \emph{output} +% (is this ever useful?), you may use just ``"."'' as the entry.\\ +% +% A sort entry is only written to the "*.idx" file if it differs from the +% text entry. + +% +% \section{Description of the \texttt{varindextwo} macros} +% +% The macros +% \DescribeMacro{\varindextwoScan} +% \DescribeMacro{\varindextwo} +% \begin{verbatim} +% \varindextwoScan \varindextwo\end{verbatim} +% +% can be used together as parameters \meta{scan program} resp.\ +% \meta{main program} for the "\varindex" command. +% If "\varindex" is called with these macros, and no +% explicit format argument is given, these macros generate a format +% depending on the number of entries in \meta{main entries}: +% +% \begin{enumerate} +% \item[a)] If there is only one entry in \meta{main entries}, then the format +% ``"1"'' resp.\ ``"*1"\myspace"1"'' is +% generated (depending whether the "*" flag was used or not), i.\,e.\ the +% entry is put into the index, and printed if "\varindex" was +% called with the "*" flag. +% +% \item[b)] If there are two entries in \meta{main entries}, then +% \meta{format} becomes ``\myspace"1!~2"\myspace"1!2~"''. For example, if +% \meta{main entries} is ``"graulty bazola"'', then the "\index" entries +% +% \begin{myindex} +% \myi graulty +% \mys $\sim$ bazola\pno +% \myi bazola +% \mys graulty $\sim$\pno +% \end{myindex} +% +% are produced.\par +% You can modify the first format entry with the following flags:\par +% \bigskip +% +% \begin{tabular}[t]{lll} +% flags&format used&with ``"*"'' additionally\\\hline +% "_" &"12" &"*12"\\ +% "-" &"1-2" &"*1-2"\\ +% "^" &"1!~-2" resp.\ "1!-2" &"*1-2"\\ +% "-^"&"1-!~.2" resp.\ "1-!~2"&"*1-2"\\ +% "." &"1.2" &"*1.2"\\ +% ".^"&"1!~.2" &"*1.2"\\ +% "/" &"1!2" (without "~") &"*12"\\ +% "<" &no entry &"*12" +% \end{tabular}\par\bigskip +% +% Here, the combinations "-^" and ".^" mean that both flags are used +% (the order plays no role). +% The output for "^" respectively "-^" is determined by the switches +% \begin{myquote} +% \DescribeMacro{\varindextwoDashTildetrue}"\varindextwoDashTildetrue" +% (default)\par +% \DescribeMacro{\varindextwoDashTildefalse}"\varindextwoDashTildefalse" +% \end{myquote} +% and +% \begin{myquote} +% \DescribeMacro{\varindextwoDashSpacetrue}"\varindextwoDashSpacetrue"\\ +% \DescribeMacro{\varindextwoDashSpacefalse}"\varindextwoDashSpacefalse" +% (default) +% \end{myquote} +% respectively. The last entry in the above table is an additional format +% entry which is generated if also the ``"*"'' flag is used.\par +% +% You can modify the second format entry with the following flags:\par +% \bigskip +% +% \begin{tabular}[t]{ll} +% flags&format used\\\hline +% "," &"2,1~" resp.\ "2,1"\\ +% "~" &"21"\\ +% "=" &"2!1-~"\\ +% ",="&"2,1-~" resp.\ "2,1-"\\ +% "+" &"2-1"\\ +% ":" &"2!1.~"\\ +% ",:"&"2,1.~" resp.\ "2,1"\\ +% ";" &"2.1"\\ +% ">" &no entry\\ +% "!" &Append "~" (if not already there)\\ +% "?" &Without trailing "~" +% \end{tabular}\par\bigskip +% +% Whether the first or the second alternatives in the above forms is used +% depends on the status of the switch +% \begin{myquote} +% \DescribeMacro{\varindextwoCommaTildetrue}"\varindextwoCommaTildetrue" +% (default)\\ +% \DescribeMacro{\varindextwoCommaTildefalse}"\varindextwoCommaTildefalse" +% \end{myquote} +% We point out that "\varindextwoCommaTildefalse" was in earlier versions of +% "varindex" the default (and could not be changed). +% Note that this switch has no effect if the ! or ? flags are used.\par +% +% \textbf{Hint} for remembering the symbols: The symbols "_" "." "-" +% for the first entry are the same flags as for the output and the same +% flags which are used in the \meta{format} argument. +% The corresponding symbols "~" ":" (and ";") "=" (and "+") for the second +% entry ``look similar''. The "," flag is only useful in the second entry +% (and is the same symbol as in the \meta{format} argument). +% The two exceptional symbols ">" and "<" can be read as ``generate only the +% `forward-directed' resp.\ `backward-directed entry'\,''.\par +% +% +% \item[c)] If there are three entries in \meta{main entries}, then +% \meta{format} becomes ``\myspace"1!~23"\myspace"3!12~"''. +% For example, if \meta{main entries} is ``"graulty of bazola"'', then +% the following two "\index" entries are produced. +% +% \begin{myindex} +% \myi graulty +% \mys $\sim$ of bazola\pno +% \myi bazola +% \mys graulty of $\sim$\pno +% \end{myindex} +% +% The flags have an analogous effect to~b). +% In addition, if the flags "`" resp.\ "'" are used, the second entry +% (in our example: ``of'') is omitted from the output in the first +% resp.\ in the second index entry. If the flags "*" and "`" +% are used together, the second entry is also omitted from the output +% into the running text. +% +% \item[d)] If there are four entries in \meta{main entries}, then +% \meta{format} becomes ``\myspace"1!~24"\myspace"4!31~"''. For example, if +% \meta{main entries} is ``"graulty of@ OF bazola"'', then the following +% two "\index" entries are produced. +% +% \begin{myindex} +% \myi graulty +% \mys $\sim$ of bazola\pno\sortedlikeq{bazola} +% \myi bazola +% \mys graulty OF $\sim$\pno\sortedlikeq{graulty OF} +% \end{myindex} +% In other words, we have a similar effect as in~c) except that for the +% first entry the third word is skipped, and for the second entry the +% second word is skipped. All flags as in~c) can be used with an +% analogous meaning. +% Also, if the "*" flag is used, the output into the running text is +% analogous to~c) (the third word is skipped). +% +% \item[e)] If there are more than four entries in \meta{main entries}, then +% \meta{formatA} resp.\ \meta{format*A} is used. +% \end{enumerate} +% +% If an explicit \meta{format} argument is given to "\varindex" (together with +% the "\varindextwo" macro as \meta{main program}), then this format is used, +% except when it contains the symbol "+". In this case, this symbol "+" is +% replaced by the format which would be generated by the rules~a)--e). +% If additionally the "*" flag is used, there is a special rule: +% If the explicit format contains a "*", then no additional "*"-output is +% produced. Otherwise, the "*"-output from~a)--e) is prepended to the given +% \meta{format} (with a space at the end, unless the format string is empty). +% This means that ``normally'' you have the output from a)--e), +% unless you write an own explicit "*"-part in the \meta{format}. +% +% If you do not like the tokens chosen for the default symbols, you can +% easily choose your own tokens by just replacing "\varindextwoScan" with your +% own macro (or defining your own ``magic'' tokens after "\varindextwoScan", +% see the example in Section~\ref{ss:expatch}). + +% +% \section{Primitive customization} +% +% +% You may use the command +% \DescribeMacro{\varindexUsePlaceholderAfalse} +% \DescribeMacro{\varindexUsePlaceholderBfalse} +% \begin{verbatim} +% \varindexUsePlaceholderAfalse +% \varindexUsePlaceholderBfalse\end{verbatim} +% to ignore the symbol "~" resp.\ "=" in the format entry. +% You can easily restore the default by +% \DescribeMacro{\varindexUsePlaceholderAtrue} +% \DescribeMacro{\varindexUsePlaceholderBtrue} +% \begin{verbatim} +% \varindexUsePlaceholderAtrue +% \varindexUsePlaceholderBtrue\end{verbatim} +% +% If you want to switch off the placeholder only at the beginning of +% a new entry (resp.\ of a new subentry), you can use the commands +% \DescribeMacro{\varindexLeadingPlaceholderAfalse} +% \DescribeMacro{\varindexLeadingPlaceholderBfalse} +% \begin{verbatim} +% \varindexLeadingPlaceholderAfalse +% \varindexLeadingPlaceholderBfalse\end{verbatim} +% The default is restored with +% \DescribeMacro{\varindexLeadingPlaceholderAtrue} +% \DescribeMacro{\varindexLeadingPlaceholderBtrue} +% \begin{verbatim} +% \varindexLeadingPlaceholderAtrue +% \varindexLeadingPlaceholderBtrue\end{verbatim} +% +% By default, the ``","'' in the format string is in this connection +% treated as a symbol generating a new ``subentry''. You can change this +% default with the command +% \DescribeMacro{\varindexCommaLeadsfalse} +% \begin{verbatim} +% \varindexCommaLeadsfalse\end{verbatim} +% You may switch back with +% \DescribeMacro{\varindexCommaLeadstrue} +% \begin{verbatim} +% \varindexCommaLeadstrue\end{verbatim} +% +% +% The content of the macros +% \DescribeMacro{\varindexPlaceholderAText} +% \DescribeMacro{\varindexPlaceholderASort} +% \DescribeMacro{\varindexPlaceholderBText} +% \DescribeMacro{\varindexPlaceholderBSort} +% \begin{verbatim} +% \varindexPlaceholderAText +% \varindexPlaceholderASort +% \varindexPlaceholderBText +% \varindexPlaceholderBSort\end{verbatim} +% is used as the placeholder "~" resp.\ "=" in the index resp.\ sort entry. +% Note that if one of these entries expands empty, different rules for +% the automatic insertion of spaces apply (for the index and sort entry +% separately). +% +% You may prefer that the placeholder text resp.\ sort content changes at +% run time to the context of the previous "!" entry. For example, you may +% want that the command "\varindex{Gibble Gobble}{2!~2}" produces the index +% entry +% \begin{myindex} +% \myi Gibble +% \mys Gibble Gobble\pno +% \end{myindex} +% (or is at least \emph{sorted} as such an entry). +% +% You can achieve this with the commands +% \DescribeMacro{\varindexPreviousATexttrue} +% \DescribeMacro{\varindexPreviousASorttrue} +% \DescribeMacro{\varindexPreviousBTexttrue} +% \DescribeMacro{\varindexPreviousBSorttrue} +% \begin{verbatim} +% \varindexPreviousATexttrue +% \varindexPreviousASorttrue +% \varindexPreviousBTexttrue +% \varindexPreviousBSorttrue\end{verbatim} +% for the text and sort entry and the placeholders "~" and "=", respectively. +% With these commands, the content of "\varindexPlaceholderAText" etc +% is only used as the default if no previous "!" entry was given. +% You can switch back to the default mode with the respective commands +% \DescribeMacro{\varindexPreviousATextfalse} +% \DescribeMacro{\varindexPreviousASortfalse} +% \DescribeMacro{\varindexPreviousBTextfalse} +% \DescribeMacro{\varindexPreviousBSortfalse} +% \begin{verbatim} +% \varindexPreviousATextfalse +% \varindexPreviousASortfalse +% \varindexPreviousBTextfalse +% \varindexPreviousBSortfalse\end{verbatim} +% By default, the ``","'' in the format entry is considered in this connection +% similar to ``"!"''. If you want to change this, use the command +% \DescribeMacro{\varindexCommaExpandfalse} +% \begin{verbatim} +% \varindexCommaExpandfalse\end{verbatim} +% You may switch back with +% \DescribeMacro{\varindexCommaExpandtrue} +% \begin{verbatim} +% \varindexCommaExpandtrue\end{verbatim} +% +% Since version 2.2, the dash ``"-"'' occurring at the beginning of entry +% (or after ``"!"'' or even after ``","'' if "\varindexCommaExpandtrue" is in +% effect) is ignored for sorting. +% You can switch off this feature with the command +% \DescribeMacro{\varindexOutSortDashBeg} +% \begin{verbatim} +% \let\varindexOutSortDashBeg\varindexOutSortDash\end{verbatim} +% To restore the new default, use +% \begin{verbatim} +% \let\varindexOutSortDashBeg\toolboxEmpty\end{verbatim} +% \bigskip +% The commands +% \begin{myquote} +% \DescribeMacro{\varindexSetWordString} +% "\varindexSetWordString{|}"\myquad +% (Use "|" as separator for entries instead of spaces)\par +% \DescribeMacro{\varindexSetSortString} +% "\varindexSetSortString{>}"\myquad(default: "@")\par +% \DescribeMacro{\varindexSetPlainString} +% "\varindexSetPlainString{<}"\myquad(default: "!") +% \end{myquote} +% set the default ``magic'' strings used for \meta{main entries}. +% The argument of the above macros is intentionally \emph{not} expanded (so +% that you do not have troubles with active characters like "~"). +% To force expansion, use e.\,g. +% \begin{verbatim} +% \expandafter\varindexSetWordString\expandafter{\MacroToExpand}\end{verbatim} +% or some similar construct. +% +% If you use a different separator than ``space'' for the entries, you may +% want to change the rule how braces are eliminated. With the commands +% \DescribeMacro{\varindexEliminateOuterBracetrue} +% \DescribeMacro{\varindexEliminateInnerBracetrue} +% \DescribeMacro{\varindexEliminateOuterBracefalse} +% \DescribeMacro{\varindexEliminateInnerBracefalse} +% \begin{verbatim} +% \varindexEliminateOuterBracetrue +% \varindexEliminateInnerBracetrue +% \varindexEliminateOuterBracefalse +% \varindexEliminateInnerBracefalse\end{verbatim} +% you may allow resp.\ forbid the elimination of braces around the entries +% resp.\ around \meta{indextext} \meta{sorttext} and \meta{outputtext} +% With the flag ``"1"'', \meta{main entries} is considered as one single entry, +% but if "\varindexEliminateOuterBracetrue" is set (which is the default) +% also in this case an additional pair of braces around main entry is +% eliminated. +% +% Similarly as above, +% \begin{myquote} +% \DescribeMacro{\varindexSetIndexString} +% "\varindexSetIndexString{|}" \myquad default: space\par +% \DescribeMacro{\varindexSetOutputString} +% "\varindexSetOutputString{<}" \myquad default: "*"\par +% \DescribeMacro{\varindexSetTildeAString} +% "\varindexSetTildeAString{~}" \myquad (is default)\par +% \DescribeMacro{\varindexSetTildeBString} +% "\varindexSetTildeBString{=}" \myquad (is default)\par +% \DescribeMacro{\varindexSetSpaceString} +% "\varindexSetSpaceString{_}" \myquad (is default)\par +% \DescribeMacro{\varindexSetSpaceTokString} +% "\varindexSetSpaceTokString{s}"\myquad (is default)\par +% \DescribeMacro{\varindexSetOmitString} +% "\varindexSetOmitString{.}" \myquad (is default)\par +% \DescribeMacro{\varindexSetCommaString} +% "\varindexSetCommaString{,}" \myquad (is default)\par +% \DescribeMacro{\varindexSetDashString} +% "\varindexSetDashString{-}" \myquad (is default)\par +% \DescribeMacro{\varindexSetExclamString} +% "\varindexSetExclamString{!}" \myquad (is default)\par +% \DescribeMacro{\varindexSetStringForNr} +% "\varindexSetStringForNr 1{a}" \myquad default: "1"\par +% "\varindexSetStringForNr{11}{b}"\myquad No default! +% \end{myquote} +% set the default ``magic'' strings used for \meta{format}. +% In contrast to before, the arguments are fully expanded (with +% "\varindexedef", see Section~\ref{s:docufeature}). +% Note that the last command provides a way to access more than $10$ entries! +% +% If you use "\varindexSetIndexString{|}" (with some non-space token), +% you may still use spaces in the format which then are just ignored. +% +% +% Avoid that one string is a prefix of another string: In this case, +% strange effects may happen, and this behavior may even change in +% future releases of this package. +% Note that the above effect may arise unintentionally if you use active +% chars. For this reason, ``"~"'' is defined to expand to the letter ``"~"'', +% before the expansion is executed. Maybe in later releases of this package +% there will be further such redefinitions. +% You can explicitly use this feature in your own macros by using +% "\varindexedef" instead of the usual "\edef", +% see Section~\ref{s:docufeature}. +% +% You can change the output for the text resp sort entry of the various +% symbols used in the format string. More precisely, you can redefine +% +% \begin{myquote} +% \DescribeMacro{\varindexOutExclam} +% "\varindexOutExclam" \myquad Text output for "!"\par +% \DescribeMacro{\varindexFollowsExclam} +% "\varindexFollowsExclam" \myquad +%Decide whether magic space after "!" is inserted\par +% \DescribeMacro{\varindexOutTextComma} +% "\varindexOutTextComma" \myquad Text output for ","\par +% \DescribeMacro{\varindexOutSortComma} +% "\varindexOutSortComma" \myquad Sort output for ","\par +% \DescribeMacro{\varindexFollowsComma} +% "\varindexFollowsComma" \myquad +%Decide whether magic space after "," is inserted\par +% \DescribeMacro{\varindexPreceedsComma} +% "\varindexPreceedsComma" \myquad +%Decide whether magic space before "," is erased\par +% \DescribeMacro{\varindexOutTextSpace} +% "\varindexOutTextSpace" \myquad Text output for "_"\par +% \DescribeMacro{\varindexOutSortSpace} +% "\varindexOutSortSpace" \myquad Sort output for "_"\par +% \DescribeMacro{\varindexFollowsSpace} +% "\varindexFollowsSpace" \myquad +%Decide whether magic space after "_" is inserted\par +% \DescribeMacro{\varindexPreceedsSpace} +% "\varindexPreceedsSpace" \myquad +%Decide whether magic space before "_" is erased\par +% \DescribeMacro{\varindexOutTextSpTok} +% "\varindexOutTextSpTok" \myquad Text output for "s"\par +% \DescribeMacro{\varindexOutSortSpTok} +% "\varindexOutSortSpTok" \myquad Sort output for "s"\par +% \DescribeMacro{\varindexFollowsSpTok} +% "\varindexFollowsSpTok" \myquad +%Decide whether magic space after "s" is inserted\par +% \DescribeMacro{\varindexPreceedsSpTok} +% "\varindexPreceedsSpTok" \myquad +%Decide whether magic space before "s" is erased\par +% \DescribeMacro{\varindexOutTextDash} +% "\varindexOutTextDash" \myquad Text output for "-"\par +% \DescribeMacro{\varindexOutSortDash} +% "\varindexOutSortDash" \myquad Sort output for "-"\par +% \DescribeMacro{\varindexOutSortDashBeg} +% "\varindexOutSortDashBeg" \myquad Sort output for "-" +%if nothing preceeds.\par +% \DescribeMacro{\varindexFollowsDash} +% "\varindexFollowsDash" \myquad +%Decide whether magic space after "-" is inserted\par +% \DescribeMacro{\varindexPreceedsDash} +% "\varindexPreceedsDash" \myquad +%Decide whether magic space before "-" is erased\par +% \DescribeMacro{\varindexOutTextOmit} +% "\varindexOutTextOmit" \myquad Text output for "."\par +% \DescribeMacro{\varindexOutSortOmit} +% "\varindexOutSortOmit" \myquad Sort output for "."\par +% \DescribeMacro{\varindexFollowsOmit} +% "\varindexFollowsOmit" \myquad +%Decide whether magic space after "." is inserted\par +% \DescribeMacro{\varindexPreceedsOmit} +% "\varindexPreceedsOmit" \myquad +%Decide whether magic space before "." is erased +% \end{myquote} +% +% The meaning is as follows: "\varindexOut..." should just expand to the +% tokens which should be written into the text resp.\ sort output. +% The corresponding macro "\varindexFollows..." is typically defined with +% one of the following commands: +% \begin{verbatim} +% \let\varindexFollows...\varindexNextSpace +% \let\varindexFollows...\varindexNoNextSpace\end{verbatim} +% In the first case, a space is `magically' inserted in front of a +% subsequent token (unless this token erases the magic space). +% In the second case, no space follows, of course. +% There is an alternative call: +% \begin{myquote} +% \DescribeMacro{\varindexSpaceTexttrue} +% \DescribeMacro{\varindexSpaceTextfalse} +% \DescribeMacro{\varindexSpaceSorttrue} +% \DescribeMacro{\varindexSpaceSortfalse} +% "\def\varindexFollows...{\varindexSpaceTexttrue\varindexSpaceSortfalse}" +% \end{myquote} +% This definition achieves that for the text output a space should follow, +% but not for the sort output. Of course, you can also use similarly the +% commands "\varindexSpaceTextfalse" and/or "\varindexSpaceSorttrue" in the +% above definition (the effect should be obvious). +% In particular, "\varindexNextSpace" is equivalent to +% "\varindexSpaceTexttrue\varindexSorttrue".\par +% +% The macro "\varindexPreceeds..." is similarly as "\varindexFollows..." with +% the difference that it is executed \emph{before} the token in question is +% output. In particular, you can ignore a previous `magic space'. +% All of the `magic space' commands are defined by default with +% \begin{verbatim} +% \let\varindexFollows...\toolboxEmpty +% \let\varindexPreceeds...\varindexNoNextSpace\end{verbatim} +% with the following two exceptions: +% \begin{verbatim} +% \let\varindexFollowsExclam\varindexNextSpace +% \let\varindexFollowsComma\varindexNextSpace\end{verbatim} +% +% \section{Documented Features}\label{s:docufeature} +% +% The title ``documented features'' means that these are hacks which allow +% further customization but which are ``documented'' in the sense that these +% hacks will also be available in later versions. (You use an ``undocumented'' +% feature if you must use a macro name of the "varindex" package which +% contains the symbol "@"). If a feature described in this section does not +% work in the documented way, this is a bug and might be repaired in a +% later version of "\varindex". +% +% (In a future release, "varindex" will cook your coffee, too).\bigskip +% +% +% The argument \meta{main entries} is \emph{never} expanded, so you can +% actually write macros into the "*.idx" file. +% The command actually used to write the index is +% \begin{myquote} +% \DescribeMacro{\varindexIndex}"\varindexIndex" +% \end{myquote} +% (which by default is of course defined as "\index"). +% Since some implementations of the "\index" command still (partially) expand +% their argument (which might be considered as a bug), the argument of +% "\varindexIndex" is translated before the actual call with the aid of +% "\toolboxMakeHarmless". +% If you want to redefine "\varindexIndex" to a personal "\index"-output +% function, you might want to skip the "\toolboxMakeHarmless" step. +% This is arranged with the command +% \begin{myquote} +% \DescribeMacro{\varindexNoConvert}"\varindexNoConvert" +% \end{myquote} +% You can cancel the effect of this command with +% \begin{myquote} +% \DescribeMacro{\varindexNoConvert}"\varindexNoConvert" +% \end{myquote} +% Even if "\varindexNoConvert" is not in effect, \meta{main entries} is not +% expanded (and in particular, the argument of "\varindexIndex" consists of +% the corresponding entries in an unexpanded form).\par\bigskip +% +% The whole "\varindex" expansion takes place in a group, so all your +% variables are local to a single call (unless you use "\gdef" +% (and friends) of course).\par +% +% There are no "\global" directives used in any macro of this package. +% In particular, if you call the above macros in a group (or redefine +% "\varindexIndex"), the effect holds only until the end of the group. +% \par\bigskip +% +% In contrast to \meta{main entries}, the \meta{format} argument is expanded +% (with "\varindexedef", see below) (and also \meta{formatA} resp.\ +% \meta{format*A} is expanded before), so you can define abbreviations +% (even simple conditional % abbreviations) for \meta{format}. +% Note, however, that the expansion is essentially only evaluated with "\edef". +% So, you will probably not want to use e.\,g.\ "\relax", since this command +% expands to itself (and not into nothing -- use "\toolboxEmpty" if you want +% the latter). +% If you want more complex abbreviations, use \meta{main program} instead. +% +% In order to help you write conditional abbreviations, the +% following variables are defined when your macro is expanded (and in +% particular also in \meta{main program}). You may of course redefine them +% appropriately: +% +% \begin{description} +% \item[\macrott{varindexAppend}]\DescribeMacro{\varindexAppend} +% The argument \meta{pagestyleA} resp.\ \meta{pagestyleB}. +% \item[\macrott{varindexCount}]\DescribeMacro{\varindexCount} +% A \TeX\ counter containing the number of entries in \meta{main entries}. +% \item[\macrott{varindexLastEntry}]\DescribeMacro{\varindexLastEntry} +% This is a macro (\emph{not} a counter) which is usually the value of +% "\the\varindexCount". See below. +% \item[\macrott{varindexEntry1} \macrott{varindexEntry2} \mdseries$\ldots$] +%\DescribeMacro{\varindexEntry1-...} +% The (index) text occurring in \meta{Entry1} \meta{Entry2} $\ldots$ +% \item[\macrott{varindexSort1} \macrott{varindexSort2} \mdseries$\ldots$] +%\DescribeMacro{\varindexSort1-...} +% The corresponding sort entry. If no sort entry was given, this is +% the same as the corresponding "\varindexEntry1-..." +% \item[\macrott{varindexPlain1} \macrott{varindexPlain2} \mdseries$\ldots$] +%\DescribeMacro{\varindexPlain1-...} +% The text which should be output in the text. If no such entry was given, +% this is the same as the corresponding "\varindexEntry1-..." +% \end{description} +% "\varindexCount" may be larger than $10$, and correspondingly there may be +% also more than $10$ different "\varindexEntry"/"Sort"/"Plain" macros. +% If you \emph{add} entries, you have to increase "\varindexCount" +% correspondingly, otherwise an error is produced if the format string +% contains an entry larger then "\varindexCount". However, your additional +% entries are \emph{not} output for \emph{empty} formats: +% For empty formats the entries output are $1$--"\varindexLastEntry". +% So if you want to output also your additional entries +% in empty formats, you have to set "\varindexLastEntry" to your modified +% value of "\varindexCount" in \meta{main program}. You may e.\,g.\ achieve +% this with the following lines: +% \begin{myquote} +% "\expandafter"\\ +% "\def\expandafter\varindexLastEntry\expandafter{\the\varindexCount}"\proz +% \end{myquote} +% It is admissible that "\varindexLastEntry" is larger than "\varindexCount": +% In this case all entries until "\varindexLastEntry" are +% output in empty formats without producing an error (provided, of course, +% that the corresponding variables "\varindexEntry..."/"Sort..."/"Plain..." are +% defined). +% +% Note that numbers in \TeX\ command names require special handling, +% i.\,e., you have to use something like +% +% \begin{verbatim} +% \csname varindexPlain2\endcsname\end{verbatim} +% +% to access variables. To avoid this, you may want to use the macros +% \DescribeMacro{\toolboxLet}"\toolboxLet" and +% \DescribeMacro{\toolboxWithNr}"\toolboxWithNr" of the "toolbox" package. +% Examples are +% \begin{verbatim} +% \toolboxWithNr 1\let{varindexEntry}\toolboxEmpty +% \toolboxWithNr {10}\def{varindexSort}{Foo} +% \toolboxLet \mymacro{varindexPlain\the\mycount}\end{verbatim} +% These commands set "\varindexEntry1" to "\toolboxEmpty", "\varindexSort10" +% to Foo, and "\mymacro" to the content of "\varindexPlain5" (if "\mycount=5"). +% +% All these variables are also available when \meta{main program} is expanded. +% In \meta{main program} also the following functions are useful: +% +% \begin{description} +% \item[\macrott{varindexFormat}]\DescribeMacro{\varindexFormat} +% This macro expands to the actual \meta{format} which is used. +% The main purpose of \meta{main program} will usually be to (re)define +% this macro. After \meta{main program} has been called, this macro is +% modified in several ways: +% \begin{enumerate} +% \item "\varindexFormat" is expanded (with "\varindexedef", see below). +% (thus, "\varindexFormat" is expanded \emph{before and after} the call +% of \meta{main program}). +% \item "\ifvarindexStar" is true (see below) +% a ``"*"'' resp.\ ``"*"\myspace'' is prepended. +% \item If it is only ``"*"'', it is replaced by ``"*"\myspace''. +% \end{enumerate} +% Note that before execution of \meta{main program}, no tests on the +% validity of the format are done: You may use your own symbols to +% `communicate' with \meta{main program} (provided that \meta{main program} +% eliminates these symbols afterwards). +% \item[\macrott{varindexFormatDefault}]\DescribeMacro{\varindexFormatDefault} +% This macro expands to \meta{formatA} resp.\ \meta{format*A} +% (in the expanded form) depending whether the "*" flag has been used in +% the call. Note that this expansion was executed \emph{before} +% the optional format argument is expanded for the first time. +% \item[\macrott{ifvarindexstar}]\DescribeMacro{\ifvarindexstar} +% \meta{ifpart} [ "\else" \meta{elsepart} ] "\fi"\par +% If the optional "*" was given, \meta{ifpart} is executed, otherwise +% \meta{elsepart}. This is a \TeX\ "if" command. In particular, by +% \DescribeMacro{\varindexStarfalse}\DescribeMacro{\varindexStartrue} +% "\varindexStarfalse" resp.\ "\varindexStartrue" +% you may change the behavior for future "if"'s. This can be used +% to prevent/force that a ``"*"'' resp.\ ``"*"\myspace'' is prepended to +% the format after the execution of \meta{main program}. +% Setting of this variable has no effect in \meta{scan program}. +% \item[\macrott{ifvarindexExplicitFormat}] +% \DescribeMacro{\ifvarindexExplicitFormat} +% This is a \TeX\ "if" command (see above) which is true if the optional +% format argument \meta{formatB} was given. +% \end{description} +% +% To ``compose'' the format, you may want to use the macros +% \begin{myquote} +% \DescribeMacro{\toolboxDef} +% "\toolboxDef\macrotodefine"\bracemeta{argumentlist}\par +% \DescribeMacro{\toolboxAppend} +% "\toolboxAppend\macrotoappend"\bracemeta{argumentlist}\par +% \DescribeMacro{\varindexedef} +% "\varindexedef\macrotodefine"\bracemeta{argumentlist} +% \end{myquote} +% All commands work similar to "\def" resp.\ "\edef" with two differences: +% +% For "\toolboxDef\macro", \meta{argumentlist} is expanded precisely by one +% level (for details, see the documentation of the "toolbox" package). +% Of course, for "\toolboxAppend", the new definition is appended to the old +% definition of "\macro". +% +% "\varindexedef" fully expands \meta{argumentlist}. However, some active +% symbols (currently only "~", but additional symbols might follow in a +% future release) are deactivated before expansion, so that "~" actually +% expands to "~" and not to a strange command sequence. +% +% +% To ``decompose'' the format, you may want to use one of the macros +% +% \begin{myquote} +% \DescribeMacro{\toolboxSplitAt} +% "\toolboxSplitAt"\bracemeta{arg}\bracemeta{critical}\bracemeta{command}\par +% \DescribeMacro{\toolboxMakeSplit} +% "\toolboxMakeSplit"\bracemeta{critical}\bracemeta{command}\par +% \DescribeMacro{\varindexMakeSplitExpand} +% "\varindexMakeSplitExpand"\relax +%\bracemeta{macros expanding to critical}\bracemeta{command}\par +% \DescribeMacro{\varindexMakeVarSplit} +% "\varindexMakeVarSplit\variable"\relax +%\bracemeta{macros expanding to critical}\bracemeta{command} +% \end{myquote} +% The first two macros are described in the "toolbox" package. +% The remaining two macros are similar to "\varindexMakeSplit" with the +% difference that the argument \meta{critical} is obtained by expanding +% \meta{macros expanding to critical} with the aid of "\varindexedef". +% In the last form, additionally "\variable" is (re)defined to expand to +% \meta{critical} ("\variable" is any free name). +% +% The following instances of a command created by "\toolboxMakeSplit" +% exist (the content of \meta{critical} should be obvious): +% +% \begin{myquote} +% \DescribeMacro{\varindexSplitAtIndex} +% "\varindexSplitAtIndex"\myquad(generated by "\varindexSetIndexString")\par +% \DescribeMacro{\varindexSplitAtOutput} +% "\varindexSplitAtOutput"\myquad(generated by "\varindexSetOutputString")\par +% \DescribeMacro{\varindexSplitAtTildeA} +% "\varindexSplitAtTildeA"\myquad(generated by "\varindexSetTildeAString")\par +% \DescribeMacro{\varindexSplitAtTildeB} +% "\varindexSplitAtTildeB"\myquad(generated by "\varindexSetTildeBString")\par +% \DescribeMacro{\varindexSplitAtSpace} +% "\varindexSplitAtSpace"\myquad(generated by "\varindexSetSpaceString"; +% by default, \meta{critical} is "_")\par +% \DescribeMacro{\varindexSplitAtSpaceTok} +% "\varindexSplitAtSpaceTok"\myquad +% (generated by "\varindexSetSpaceTokString"; +% by default, \meta{critical} is "s")\par +% \DescribeMacro{\varindexSplitAtOmit} +% "\varindexSplitAtOmit"\myquad(generated by "\varindexSetOmitString")\par +% \DescribeMacro{\varindexSplitAtComma} +% "\varindexSplitAtComma"\myquad(generated by "\varindexSetCommaString")\par +% \DescribeMacro{\varindexSplitAtDash} +% "\varindexSplitAtDash"\myquad(generated by "\varindexSetDashString")\par +% \DescribeMacro{\varindexSplitAtExclam} +% "\varindexSplitAtExclam"\myquad(generated by "\varindexSetExclamString")\par +% \DescribeMacro{\varindexSplitAtNr??} +% "\varindexSplitAtNr1"\myquad(generated by "\varindexSetStringForNr")\par +% "\varindexSplitAtNr2"\par +% $\ldots$ +% \end{myquote} +% Note that you must use "\csname ....\endcsname" to call e.\,g.\ the macro +% "\varindexSplitAtNr1". Only those numbers are admissible for +% "\varindexSplitAtNr??" which have been introduced with +% "\varindexSetStringForNr" (by default, this is the case for $1$--$10$). +% +% There is also the instance +% \DescribeMacro{\varindexSplitSpace} +% \begin{myquote} +% "\varindexSplitSpace"\myquad +% (to be distinguished from "\varindexSplitAtSpace") +% \end{myquote} +% where \meta{critical} is the space symbol. +% +% +% In addition, you may use the variables +% \begin{myquote} +% \DescribeMacro{\varindexIndexString}"\varindexIndexString"\par +% \DescribeMacro{\varindexOutputString}"\varindexOutputString"\par +% \DescribeMacro{\varindexTildeAString}"\varindexTildeAString"\par +% \DescribeMacro{\varindexTildeBString}"\varindexTildeBString"\par +% \DescribeMacro{\varindexSpaceString}"\varindexSpaceString"\par +% \DescribeMacro{\varindexSpaceTokString}"\varindexSpaceTokString"\par +% \DescribeMacro{\varindexOmitString}"\varindexOmitString"\par +% \DescribeMacro{\varindexCommaString}"\varindexCommaString"\par +% \DescribeMacro{\varindexDashString}"\varindexDashString"\par +% \DescribeMacro{\varindexExclamString}"\varindexExclamString"\par +% \DescribeMacro{\varindexNr??String}\relax +%"\varindexNr1String \varindexNr2String ..." +% \end{myquote} +% which expand to the corresponding strings.\par +% +% All the previous macros should not be redefined ``by hand''. +% They are implicitly redefined by the "\varindexSet..." commands +% (which partially also do other tasks).\par +% +% +% +% To drop possible braces, use the command +% \DescribeMacro{\toolboxDropBrace} +% \begin{verbatim} +% \toolboxDropBrace\variable\end{verbatim} +% of the "toolbox" package.\par +% +% In \meta{scan program} you may already want to call "\toolboxMakeSplit": +% In this way, the choices for the ``magic'' tokens are made in the +% (usually small) argument \meta{scan program}, and in this sense, you can +% keep your (possibly rather complex) macro \meta{main program} +% ``customizable'' (i.\,e.\ you can use the same macro also with a different +% set of ``magic'' strings). +% However, the main task of \meta{scan program} is to introduce +% new flags with +% +% \begin{myquote} +% \DescribeMacro{\varindexNewFlag} +%"\varindexNewFlag"\meta{token}"\position["\meta{program}"\varindexEndOfFlag]" +% \end{myquote} +% or +% \begin{myquote} +% "\varindexNewFlag"\meta{token}"\position[\programmacro]" +% \end{myquote} +% Here, "\position" is an (undefined) macro, and \meta{token} an arbitrary +% token. The "[program(macro)]" part is optional and is explained later. +% If \meta{token} appears in \meta{flags}, then "\position" is defined to +% expand to a (literally) number, namely the (last) position where token +% was given inside the \meta{flags} list (counting from $0$). For example, if +% \begin{verbatim} +% \varindexNewFlag ,\commapos +% \varindexNewFlag -\minuspos +% \varindexNewFlag .\pointpos\end{verbatim} +% are used in "\programA", then in the call +% \begin{verbatim} +% \varindex(){\programA}{\programB},-**-{}\end{verbatim} +% the variable "\commapos" will expand in "\programB" to "0", while +% "\minuspos" will expand to "4" (the last position is taken). Finally, +% "\pointpos" is "\undefined" (unless you defined "\pointpos" differently +% \emph{after} the call of "\varindexNewFlag"; in this case, this is the +% default). +% If "\varindexNewFlag" is called multiple times with the same token, +% only the \emph{last} call with this token takes effect. +% +% The flags "*" and "1" are introduced in this way with +% \DescribeMacro{\varindexStarPos} +% \DescribeMacro{\varindexOneEntry} +% \begin{verbatim} +% \varindexNewFlag *\varindexStarPos +% \varindexNewFlag 1\varindexOneEntry\end{verbatim} +% \emph{before} \meta{scan program} is executed. This means: +% \begin{enumerate} +% \item Usually, "\varindexStarPos" contains the (last) position of "*" +% (resp.\ is "\undefined"). Moreover, if you define "\varindexStarPos" in +% \meta{scan program} or in some flag, you get the same effect as if "*" +% had been used. +% An analogous remark holds for "\varindexOneEntry". +% \item If you introduce "*" with "\varindexNewFlag", the "*" looses its +% original meaning. The same holds for "1". +% \end{enumerate} +% +% If you have added a "[program(macro)]" part in the call of +% "\varindexNewFlag", this part is expanded whenever the flag introduced +% by "\token" is used in the call of "\varindex" +% (note that it is not excluded that this happens several times within one +% call). More precisely, program is expanded \emph{after} the variable +% "\position" has been set to the corresponding value, so you may already +% use "\position" in the program part. +% +% \textbf{Important:} The last token expanded in program \emph{must} be +% \DescribeMacro{\varindexEndOfFlag}"\varindexEndOfFlag". +% This is not nice but has to do with the way \TeX\ parses its arguments. +% Also if you use the form "\programmacro", the \emph{very last} token expanded +% must be "\varindexEndOfFlag". Even a construction like +% \begin{verbatim} +% \def\myprogrammacro{\ifx.... +% \CallSomeMacroWithvarindexEndOfFlagAtTheEnd +% \fi +% \varindexEndOfFlag}\end{verbatim} +% is forbidden: In "\CallSomeMacroWithvarindexEndOfFlagAtTheEnd" an error +% would occur at the end, since still the tokens "\fi\varindexEndOfFlag" +% are in the tokenlist when EndOfFlag is reached there. +% As a workaround, you may e.\,g.\ use +% \begin{myquote} +% "\def\myprogrammacro{\ifx..."\pari +% "\def\execute{....\varindexEndOfFlag}"\ppari +% "\else"\pari +% "\def\execute{\varindexEndOfFlag}"\ppari +% "\execute}" +% \end{myquote} +% +% If you use the form "[\programmacro]", your macro may even read additional +% parameters. These parameters are expected in the call of "\varindex" +% \emph{behind} the flag you have introduced. So you may actually use flags +% with parameters. For example, if "\scanprogram" contains a macro like +% \begin{verbatim} +% \varindexNewFlag -\minuspos[\readpara]\end{verbatim} +% and you have defined +% \begin{verbatim} +% \def\readpara#1{\def\merk{#1}\varindexEndOfFlag}\end{verbatim} +% then the call +% \begin{verbatim} +% \varindex(){\scanprogram}{\mainprg}*-{Foo}-{Foo 2}*{Entries}\end{verbatim} +% is admissible, and in \meta{main program}, +% "\merk" will have the value ``Foo 2''. +% +% If you are more familiar with \TeX, you can even allow \emph{optional} +% arguments following your flag: The value of the next (non-space) token is +% at the call of "\programmacro" already saved into the macro +% \DescribeMacro{\varindexNextToken} +% \begin{verbatim} +% \varindexNextToken\end{verbatim} +% so you can just use it to test for e.\,g.\ ``"["''. In this connection, +% you may also want to use the commands +% \DescribeMacro{\varindexTestAndExec} +% \DescribeMacro{\varindexSkipAndExec} +% \begin{verbatim} +% \varindexTestAndExec +% \varindexSkipAndExec\end{verbatim} +% Please, see the program text how these commands are applied.\bigskip +% +% Since version 2.1 you can also hack in personal extensions of the format +% string. To do this, use the command +% \begin{myquote} +% \DescribeMacro{\varindexNewFormat} +% "\varindexNewFormat\"\meta{splitcommand}\bracemeta{action} +% \end{myquote} +% Here, "\"\meta{splitcommand} is a command generated by "\toolboxMakeSplit" or +% friends (preferably by "\varindexMakeSplitExpand", because the command should +% act on the format string which is expand with "\varindexedef"). +% The string where it splits is the new string you can use +% in the format argument after this call. For each +% occurrence of the corresponding string in the format argument, +% \meta{action} will be executed. If "\"\meta{splitcommand} splits at a string +% which already had a previous meaning in the format string (or which is a +% prefix to such a string) the old meaning of this string in the format string +% is overridden. +% +% Typically, action will contain the following commands: +% One action will probably be to output a desired token (sequence) via +% \begin{myquote} +% \DescribeMacro{\varindexTokensOut} +% "\varindexTokensOut"\bracemeta{text token}\bracemeta{sort token} +% \end{myquote} +% or +% \begin{myquote} +% \DescribeMacro{\varindexTokensOutExpand} +% "\varindexTokensOutExpand"\meta{macro for text token}\relax +%\meta{macro for sort token} +% \end{myquote} +% In the first form, \meta{text token} resp.\ \meta{sort token} is the token +% sequence put into the index or running text respectively into the sort entry +% of the index for the corresponding format entry. The second form is similar +% with the only difference that the arguments must be single macros which +% expand to \meta{text token} and \meta{sort token}, respectively.\par +% +% The variable \DescribeMacro{\ifvarindexIndexMode} +% \begin{verbatim} +% \ifvarindexIndexMode\end{verbatim} +% can be used to test whether the output goes into the running text or into +% the index (i.\,e.\ whether a ``"*"'' preceeded the current entry). +% For output into the text, \meta{sort token} is ignored, of course). +% +% Another action in "\varindexNewFormat" will probably be to take care of +% the magic space flags. This is achieved by a call of "\varindexNextSpace" or +% "\varindexNoNextSpace" (or separately via "\varindexSpaceTexttrue"/"false" +% resp.\ "\varindexSpaceTexttrue"/"false"); see the earlier description. +% The magic space flags are taken into account in "\varindexTokensOut". +% Thus, if you want to ignore the previous flag for some reason you should set +% them correspondingly before this call. +% However, after the call you should also set them correspondingly for +% further processing.\par +% +% Example: +% \begin{verbatim} +% \toolboxMakeSplit{:}{splitAtColon} +% \varindexNewFormat\splitAtColon{% +% \varindexNoNextSpace +% \ifvarindexIndexMode +% \varindexTokensOut{:}{}\varindexSpaceTexttrue +% \else +% \varindexTokensOut{---}{}\varindexNoNextSpace +% \fi}\end{verbatim} +% defines a new format entry ``":"'' which has the meaning that a colon +% (automagically followed by a space) is put into the index but not into +% the sort entry. Moreover, in the running text, the colon appears as a +% long dash with no space followed. In any case, there is no magic space output +% in front of the colon.\bigskip +% +% As an alternative action in "\varindexNewFormat", you can also call the +% default commands for the format entries. The corresponding macros are +% \begin{myquote} +% \DescribeMacro{\varindexAddSpace}"\varindexAddSpace"\myquad"_"\par +% \DescribeMacro{\varindexAddSpTok}"\varindexAddSpTok"\myquad"s"\par +% \DescribeMacro{\varindexAddOmit}"\varindexAddOmit"\myquad"."\par +% \DescribeMacro{\varindexAddDash}"\varindexAddDash"\myquad"-"\par +% \DescribeMacro{\varindexAddComma}"\varindexAddComma"\myquad","\par +% \DescribeMacro{\varindexAddExclam}"\varindexAddExclam"\myquad"!"\par +% \DescribeMacro{\varindexAddTildeA}"\varindexAddTildeA"\myquad"~"\par +% \DescribeMacro{\varindexAddTildeB}"\varindexAddTildeB"\myquad"="\par +% \DescribeMacro{\varindexAddNumber}"\varindexAddNumber"\bracemeta{number} +%\myquad"0-9" (\meta{number} is "1", "2", $\ldots$) +% \end{myquote} +% The precise meaning of these macros is intentionally \emph{not} documented, +% because some details or side effects might change in a future release of +% "varindex". But just for this reason, it might be advantageous to use the +% above macros instead of writing personal substitutes which may fail to +% have such side effects.\par +% +% Example: +% \begin{verbatim} +% \varindexMakeSplitExpand{~-}{splitPhrase}% It is important to expand +% % (to have correct ~ catcode) +% \varindexNewFormat\splitPhrase{% +% \varindexAddTildeA +% \let\remember\varindexPreceedsDash +% \let\varindexPreceedsDash\toolboxEmpty +% \varindexAddDash +% \let\varindexPreceedsDash\remember}\end{verbatim} +% After the above command, ``"~"'' and ``"-"'' have their usual meaning in +% the format string except when they follow immediately in the form ``"~-"''. +% In this case, the behavior of "-" changes as if "\varindexPreceedsDash" +% were empty (which has the effect that the output looks like~``$\sim$~-'' +% instead of~``$\sim$-'').\par +% Note that although "~" is a prefix to "~-", the converse is not true: +% Thus, the above command does not change the previous meaning of~"~" +% (and of course also not of~"-").\par +% \bigskip +% +% \textbf{Some hack:} +% \TeX\ ignores leading spaces in the argument list of a ``normal'' macro. +% This has the effect that you should be able to insert spaces \emph{between} +% any of your arguments without any trouble. +% If this does not work the expected way, you can use the command +% \DescribeMacro{\varindexArgumentSpace} +% \DescribeMacro{\varindexSkipTricky} +% \begin{verbatim} +% \let\varindexArgumentSpace\varindexSkipTricky\end{verbatim} +% which implements an own macro which does this task. Sadly, this can only +% be done with some catcode trickery which in turn might bring you in trouble +% with some (\emph{very}) exotic packages. You can restore the default with +% \DescribeMacro{\varindexSkipDefault} +% \begin{verbatim} +% \let\varindexArgumentSpace\varindexSkipDefault\end{verbatim} +% +% All above customization commands/variables may be used anytime between +% two "\varindex" calls. They take effect with the next "\varindex" call. + +% +% The macros "\varindextwoScan" and "\varindextwo" are considered as a +% (very useful) \emph{example} for the customization of the "\varindex" +% command. If you need further customization, have a look at their +% definition first. + + +% \iffalse +% +% \fi +% \iffalse--------------------------------------------------------------\fi +% \StopEventually{\PrintChanges} +% \section{Implementation} +% +% \iffalse-------------------------------------------------------------- +% +% +%<*package> +% \fi +% \begin{macrocode} +%% +%% This file was generated by the docstrip utility from varindex.dtx. +%% You may distribute this file only together with the source varindex.dtx +%% (and if possible with varindex.ins) and only if these files are unmodified. +%% +%% Author: +%% +%% M. V\"ath martin@mvath.de +%% + +\ifx\typeout\undefined + \def\vx@tmp{\immediate\write17} +\else + \let\vx@tmp\typeout +\fi\vx@tmp{varindex.sty by M. Vaeth: Release 2.3} +\ifx\ProvidesPackage\undefined\else + \ProvidesPackage{varindex}[2001/05/06 v2.3] +\fi +\ifx\RequirePackage\undefined + \ifx\toolboxDef\undefined + \input toolbox.sty + \fi + \ifx\toolboxNewifFalse\undefined + \errmessage{varindex.sty requires toolbox.sty version 3.1 or higher} + \fi +\else + \RequirePackage{toolbox}[2001/05/06] +\fi + +% \end{macrocode} +% +% \subsection{The \texttt{varindextwo} (sample) macros and their ``submacros''} +% \begin{macro}{\varindextwo...}\nocomment +% +% \begin{macrocode} +%% +%% The file starts with the documented (sample) macros with their "sub"macros: +%% + +\ifx\newcommand\undefined\else + \newcommand{\varindextwoScan}{} + \newcommand{\varindextwo}{} + \newcommand{\vxtAddmyStar}{} + \newcommand{\vxtMakemyFormat}{} +\fi + +% \end{macrocode} +% +% \begin{macro}{\varindextwoScan} +% The demo ``scan'' macro. It provides some new flags. +% \begin{macrocode} +\def\varindextwoScan{% + \varindexNewFlag _\vxtSpaceA + \varindexNewFlag -\vxtDashA + \varindexNewFlag .\vxtDotA + \varindexNewFlag <\vxtOmitA + \varindexNewFlag /\vxtNoTildeA + \varindexNewFlag `\vxtNopropA + \varindexNewFlag P\vxtNopropA% Now obsolete; only for backward compatibility + \varindexNewFlag ^\vxtBreakifyA + \varindexNewFlag ,\vxtCommaB + \varindexNewFlag ~\vxtSpaceB + \varindexNewFlag +\vxtDashB + \varindexNewFlag ;\vxtDotB + \varindexNewFlag >\vxtOmitB + \varindexNewFlag !\vxtTildeB + \varindexNewFlag ?\vxtNoTildeB + \varindexNewFlag p\vxtNopropB% Now obsolete; only for backward compatibility + \varindexNewFlag '\vxtNopropB + \varindexNewFlag =\vxtDashifyB + \varindexNewFlag :\vxtOmitifyB + \varindexMakeSplitExpand{+}{vxtSplitAtMagic}% + is the magic symbol +} + +% \end{macrocode} +% \end{macro} +% +% \begin{macro}{\varindextwo} +% The ``main'' demo macro which generates two "\index" commands +% whose format depends on the number of entries in \meta{main entries} +% \begin{macrocode} +\def\varindextwo{% + \let\vxtStarFormat\undefined + \def\vxtexecute{\let\vxtmyFormat\varindexFormatDefault}% + \ifcase\varindexCount + % We have 0 entries (this cannot happen: {} generates one (empty) entry) + \or% 1 entry: + \def\vxtexecute{% + \toolboxDef\vxtmyFormat{1}% + \toolboxDef\vxtStarFormat{\varindexOutputString 1}}% + \or% 2 entries: + \def\vxtentryAa{1}% + \def\vxtentryAb{2}% + \def\vxtentryBa{2}% + \def\vxtentryBb{1}% + \let\vxtexecute\vxtMakemyFormat + \or% 3 entries: + \def\vxtentryAa{1}% + \ifx\vxtNopropA\undefined + \def\vxtentryAb{23}% + \else + \def\vxtentryAb{3}% + \fi + \def\vxtentryBa{3}% + \ifx\vxtNopropB\undefined + \def\vxtentryBb{12}% + \else + \def\vxtentryBb{1}% + \fi + \let\vxtexecute\vxtMakemyFormat + \or% 4 entries: + \def\vxtentryAa{1}% + \ifx\vxtNopropA\undefined + \def\vxtentryAb{24}% + \else + \def\vxtentryAb{4}% + \fi + \def\vxtentryBa{4}% + \ifx\vxtNopropB\undefined + \def\vxtentryBb{13}% + \else + \def\vxtentryBb{1}% + \fi + \let\vxtexecute\vxtMakemyFormat + \else% more than 4 entries: + \def\vxtexecute{\let\vxtmyFormat\varindexFormatDefault}% + \fi + \ifvarindexExplicitFormat% the optional format string was given: + \expandafter\vxtSplitAtMagic\expandafter{\varindexFormat}\vxttmp\vxttmpa + \ifx\vxttmpa\undefined + % If the Magic symbol does not occur, we do nothing + \else% Otherwise: + % We generate our format and insert it at the place of the Magic symbol: + \vxtexecute + \toolboxDef\varindexFormat{\vxttmp\vxtmyFormat\vxttmpa}% + \vxtAddmyStar + \fi + \else% without an optional format string, we generate our own format + \vxtexecute + \let\varindexFormat\vxtmyFormat + \vxtAddmyStar + \fi +} + +% \end{macrocode} +% \end{macro} +% Some flags used for the "varindextwo" macros. +% \begin{macro}{\ifvarindextwoCommaTilde}\nocomment +% \begin{macrocode} +\toolboxNewiftrue{varindextwoCommaTilde} +% \end{macrocode} +% \end{macro} +% \begin{macro}{\ifvarindextwoDashTilde}\nocomment +% \begin{macrocode} +\toolboxNewiftrue{varindextwoDashTilde} +% \end{macrocode} +% \end{macro} +% \begin{macro}{\ifvarindextwoDashSpace}\nocomment +% \begin{macrocode} +\toolboxNewiffalse{varindextwoDashSpace} +% \end{macrocode} +% \end{macro} +% +% \begin{macro}{\vxtAddmyStar} +% A submacro needed by "\varindextwo" +% \begin{macrocode} +\def\vxtAddmyStar{% + \ifvarindexStar% With the * flag, and + \ifx\vxtStarFormat\undefined\else% if we have our own StarFormat: + \varindexStarfalse% <- No further prepending of `*' desired afterwards + \expandafter\varindexSplitAtOutput\expandafter{\varindexFormat}% + \vxttmp\vxttmp + \ifx\vxttmp\undefined% Did no `*' occur in the format string yet? + \ifx\varindexFormat\toolboxEmpty% Empty format means: Only the * part: + \let\varindexFormat\vxtStarFormat + \else%Normally, we prepend our *-format and a space + \toolboxDef\varindexFormat{% + \vxtStarFormat\varindexIndexString\varindexFormat}% + \fi + \fi + \fi + \fi +} + +% \end{macrocode} +% \end{macro} +% +% \begin{macro}{\vxtAddmyStar} +% A submacro needed by "\varindextwo" +% \begin{macrocode} +\def\vxtMakemyFormat{% + \let\vxtstarseparator\toolboxEmpty + \ifx\vxtBreakifyA\undefined + \ifx\vxtSpaceA\undefined + \ifx\vxtDashA\undefined + \ifx\vxtDotA\undefined + \vxtExclamSeparator + \else + \let\vxtseparator\varindexOmitString + \let\vxtstarseparator\vxtseparator + \fi + \else + \let\vxtseparator\varindexDashString + \let\vxtstarseparator\vxtseparator + \fi + \else + \let\vxtseparator\toolboxEmpty + \fi + \else% With ^ + \ifx\vxtDotA\undefined + \let\vxtstarseparator\varindexDashString + \ifx\vxtDashA\undefined% -^ + \ifvarindextwoDashTilde + \vxtExclamSeparator + \toolboxAppend\vxtseparator\vxtstarseparator + \else + \toolboxDef\vxtseparator{\varindexExclamString\vxtstarseparator}% + \fi + \else% Plain ^ + \vxtExclamSeparator + \ifvarindextwoDashSpace + \toolboxDef\vxtseparator{\vxtstarseparator\vxtseparator}% + \else + \toolboxDef\vxtseparator{% + \vxtstarseparator\vxtseparator\varindexOmitString}% + \fi + \fi + \else% .^ + \let\vxtstarseparator\varindexOmitString + \vxtExclamSeparator + \toolboxAppend\vxtseparator\vxtstarseparator + \fi + \fi + \ifx\vxtOmitA\undefined + % We define now the string "\vxtentryAa?\vxtentryAb" where + % ? is determined by the flags. + \toolboxDef\vxtmyFormat{\vxtentryAa\vxtseparator\vxtentryAb}% + \else + \let\vxtmyFormat\toolboxEmpty + \fi + % The *-format is calculated similarly: + \toolboxDef\vxtStarFormat{\varindexOutputString + \vxtentryAa\vxtstarseparator\vxtentryAb}% + \ifx\vxtOmitB\undefined + \let\vxtappend\toolboxEmpty + \ifx\vxtSpaceB\undefined + \ifx\vxtDashB\undefined + \ifx\vxtDotB\undefined + \ifx\vxtCommaB\undefined + \let\vxtseparator\varindexExclamString + \let\vxtappend\varindexTildeAString + \else + \let\vxtseparator\varindexCommaString + \ifvarindextwoCommaTilde + \let\vxtappend\varindexTildeAString + \fi + \fi + \ifx\vxtDashifyB\undefined + \ifx\vxtOmitifyB\undefined\else + \toolboxDef\vxtappend{\varindexOmitString\vxtappend}% + \fi + \else + \toolboxDef\vxtappend{\varindexDashString\vxtappend}% + \fi + \else + \let\vxtseparator\varindexOmitString + \fi + \else + \let\vxtseparator\varindexDashString + \fi + \else + \let\vxtseparator\toolboxEmpty + \fi + \ifx\vxtTildeB\undefined\else + \let\vxtappend\varindexTildeAString + \fi + \ifx\vxtNoTildeB\undefined\else + \let\vxtappend\toolboxEmpty + \fi + % In all cases, we prepend now the string "\vxtentryBa?\vxtentryBb??" + % where ? and ?? are determined by the flags + \ifx\vxtmyFormat\toolboxEmpty% If the previous string was empty: no space + \toolboxDef\vxtmyFormat{\vxtentryBa\vxtseparator\vxtentryBb\vxtappend}% + \else + \toolboxAppend\vxtmyFormat{% + \varindexIndexString\vxtentryBa\vxtseparator\vxtentryBb\vxtappend}% + \fi + \fi +} +% \end{macrocode} +% \end{macro} +% \begin{macro}{\vxtAddmyStar} +% A submacro needed by "\vxtMakemyFormat" +% \begin{macrocode} +\def\vxtExclamSeparator{% + \ifx\vxtNoTildeA\undefined + \toolboxDef\vxtseparator{\varindexExclamString\varindexTildeAString}% + \else + \let\vxtseparator\varindexExclamString + \fi} + +% \end{macrocode} +% \end{macro} +% \end{macro} +% +% \begin{macrocode} +%% -------------------------------------------------------------------- +% \end{macrocode} +% \subsection{The main implementation of \texttt{varindex}} +% \begin{macrocode} +%% +%% Now the implementation of \varindex. +%% +% \end{macrocode} +% +% +% Counters and default variables:\par +% +% We cannot use "\toolboxIf" for "\newcount", because in plain \TeX\ and +% \LaTeX 2.09 the command "\newcount" is defined with the annoying "\outer" +% flag. +% \begin{macrocode} + +\ifx\varindexCount\undefined + \newcount\varindexCount +\fi + +% \end{macrocode} +% \begin{macro}{\varindexPlaceholderAText}\nocomment +% \begin{macrocode} +\toolboxIf\undefined\def\varindexPlaceholderAText{$\sim$} +% \end{macrocode} +% \end{macro} +% \begin{macro}{\varindexPlaceholderASort}\nocomment +% \begin{macrocode} +\toolboxIf\undefined\let\varindexPlaceholderASort\toolboxEmpty +% \end{macrocode} +% \end{macro} +% \begin{macro}{\varindexPlaceholderBText}\nocomment +% \begin{macrocode} +\toolboxIf\undefined\def\varindexPlaceholderBText{$\approx$} +% \end{macrocode} +% \end{macro} +% \begin{macro}{\varindexPlaceholderBSort}\nocomment +% \begin{macrocode} +\toolboxIf\undefined\let\varindexPlaceholderBSort\toolboxEmpty + +% \end{macrocode} +% \end{macro} +% \begin{macro}{\ifvarindexUsePlaceholderA}\nocomment +% \begin{macrocode} +\toolboxNewiftrue{varindexUsePlaceholderA} +% \end{macrocode} +% \end{macro} +% \begin{macro}{\ifvarindexUsePlaceholderB}\nocomment +% \begin{macrocode} +\toolboxNewiftrue{varindexUsePlaceholderB} +% \end{macrocode} +% \end{macro} +% \begin{macro}{\ifvarindexLeadingPlaceholderA}\nocomment +% \begin{macrocode} +\toolboxNewiftrue{varindexLeadingPlaceholderA} +% \end{macrocode} +% \end{macro} +% \begin{macro}{\ifvarindexLeadingPlaceholderB}\nocomment +% \begin{macrocode} +\toolboxNewiftrue{varindexLeadingPlaceholderB} +% \end{macrocode} +% \end{macro} +% \begin{macro}{\ifvarindexCommaLeads}\nocomment +% \begin{macrocode} +\toolboxNewiftrue{varindexCommaLeads} +% \end{macrocode} +% \end{macro} +% \begin{macro}{\ifvarindexCommaExpand}\nocomment +% \begin{macrocode} +\toolboxNewiftrue{varindexCommaExpand} +% \end{macrocode} +% \end{macro} +% \begin{macro}{\ifvarindexPreviousAText}\nocomment +% \begin{macrocode} +\toolboxNewiffalse{varindexPreviousAText} +% \end{macrocode} +% \end{macro} +% \begin{macro}{\ifvarindexPreviousASort}\nocomment +% \begin{macrocode} +\toolboxNewiffalse{varindexPreviousASort} +% \end{macrocode} +% \end{macro} +% \begin{macro}{\ifvarindexPreviousBText}\nocomment +% \begin{macrocode} +\toolboxNewiffalse{varindexPreviousBText} +% \end{macrocode} +% \end{macro} +% \begin{macro}{\ifvarindexPreviousBSort}\nocomment +% \begin{macrocode} +\toolboxNewiffalse{varindexPreviousBSort} +% \end{macrocode} +% \end{macro} +% \begin{macro}{\ifvarindexEliminateInnerBrace}\nocomment +% \begin{macrocode} +\toolboxNewiftrue{varindexEliminateInnerBrace} +% \end{macrocode} +% \end{macro} +% \begin{macro}{\ifvarindexEliminateOuterBrace}\nocomment +% \begin{macrocode} +\toolboxNewiftrue{varindexEliminateOuterBrace} + +% \end{macrocode} +% \end{macro} +% +% +% The non-local macros (they should not exist already): +% +% \begin{macrocode} +\ifx\newcommand\undefined\else + \newcommand{\varindex}{} + \newcommand{\varindexNewFlag}{} + \newcommand{\varindexTestAndExec}{} + \newcommand{\varindexSkipAndExec}{} + \newcommand{\varindexSkipDefault}{} + \newcommand{\varindexSkipTricky}{} + \newcommand{\varindexMakeVarSplit}{} + \newcommand{\varindexMakeSplitExpand}{} + \newcommand{\varindexSetWordString}{} + \newcommand{\varindexSetSortString}{} + \newcommand{\varindexSetPlainString}{} + \newcommand{\varindexSetIndexString}{} + \newcommand{\varindexSetOutputString}{} + \newcommand{\varindexSetTildeAString}{} + \newcommand{\varindexSetTildeBString}{} + \newcommand{\varindexSetSpaceString}{} + \newcommand{\varindexSetSpaceTokString}{} + \newcommand{\varindexSetOmitString}{} + \newcommand{\varindexSetCommaString}{} + \newcommand{\varindexSetDashString}{} + \newcommand{\varindexSetExclamString}{} + \newcommand{\varindexSetStringForNr}{} + \newcommand{\varindexedef}{} + \newcommand{\varindexArgumentSpace}{} + \newcommand{\varindexNewFormat}{} + \newcommand{\varindexTokensOut}{} + \newcommand{\varindexTokensOutExpand}{} + \newcommand{\varindexAddNumber}{} + \newcommand{\varindexAddComma}{} + \newcommand{\varindexAddTildeA}{} + \newcommand{\varindexAddTildeB}{} + \newcommand{\varindexAddExclam}{} + \newcommand{\varindexAddSpace}{} + \newcommand{\varindexAddSpTok}{} + \newcommand{\varindexAddOmit}{} + \newcommand{\varindexAddDash}{} + \newcommand{\varindexDoConvert}{} + \newcommand{\varindexNoConvert}{} +%% Obsolete names (only provided for backward compatibility): + \newcommand{\varindexdef}{} + \newcommand{\varindexspace}{} + \newcommand{\varindexDropBrace}{} + \newcommand{\varindexMakeSplit}{} + \newcommand{\varindexLet}{} + \newcommand{\varindexWithNr}{} +\fi +\let\varindexdef\toolboxDef +\let\varindexspace\toolboxSpace +\let\varindexDropBrace\toolboxDropBrace +\let\varindexMakeSplit\toolboxMakeSplit +\let\varindexLet\toolboxLet +\let\varindexWithNr\toolboxWithNr + +% \end{macrocode} +% +% \begin{macro}{\varindex} +% +% The essential ``flow'' is easy: +% +% "\varindex" reads the arguments (using lots of auxiliary macros) +% and then calls "\vx@Main". +% +% \begin{macrocode} +\def\varindex{\begingroup +% \end{macrocode} +% Before "toolbox" 3.1 the following "\if"'s could not be made local. +% The reason is that in plain \TeX\ and \LaTeX 2.09 the command "\newif" is +% "\outer". Due to this stupid restriction, we had to define them before. +% "toolbox" 3.1 has now implemented its own "\newif" command for this +% reason.\par\bigskip +% +% "\if"'s for scanning of the parameters: +% +% \begin{macro}{\ifvarindexStar}\nocomment +% \begin{macrocode} + \toolboxNewifFalse{varindexStar}% +% \end{macrocode} +% \end{macro} +% \begin{macro}{\ifvarindexExplicitFormat}\nocomment +% \begin{macrocode} + \toolboxNewifFalse{varindexExplicitFormat}% +% \end{macrocode} +% \end{macro} +% \begin{macro}{\ifvx@atespace} +% is true if a space was ate during skipping +% \begin{macrocode} + \toolboxNewifFalse{vx@atespace}% +% \end{macrocode} +% \end{macro} +% \begin{macro}{\ifvx@savespace} +% is true if we must ``put back'' an eaten space +% \begin{macrocode} + \toolboxNewifFalse{vx@savespace}% +% \end{macrocode} +% \end{macro} +% "\if"'s for "\vx@main" and its submacros: +% \begin{macro}{\ifvx@ffound}\nocomment +% \begin{macrocode} + \toolboxNewifFalse{vx@ffound}% +% \end{macrocode} +% \end{macro} +% \begin{macro}{\ifvarindexIndexMode}\nocomment +% "\ifvarindexIndexMode" is true if the currently parsed format corresponds +% to an index entry (in contrast to the output into the running text). +% \begin{macrocode} + \toolboxNewifTrue{varindexIndexMode}% +% \end{macrocode} +% \end{macro} +% \begin{macro}{\ifvarindexSpaceText}\nocomment +% \begin{macrocode} + \toolboxNewifFalse{varindexSpaceText}% +% \end{macrocode} +% \end{macro} +% \begin{macro}{\ifvarindexSpaceSort}\nocomment +% \begin{macrocode} + \toolboxNewifFalse{varindexSpaceSort}% +% \end{macrocode} +% \end{macro} +% \begin{macro}{\ifvx@firstiter}\nocomment +% \begin{macrocode} + \toolboxNewifTrue{vx@firstiter}% +% \end{macrocode} +% \end{macro} +% \begin{macro}{\ifvx@tildeLead} +% Decides whether we have a leading tilde +% \begin{macrocode} + \toolboxNewifFalse{vx@tildeLead}% +% \end{macrocode} +% \end{macro} +% \begin{macro}{\ifvx@commaTextLead} +% True if "\ifvarindexCommaExpand" is true and we have no token after comma. +% \begin{macrocode} + \toolboxNewifFalse{vx@commaTextLead}% +% \end{macrocode} +% \end{macro} +% \begin{macro}{\ifvx@commaSortLead}\nocomment +% True if "\ifvarindexCommaExpand" is true and we have no token after comma. +% \begin{macrocode} + \toolboxNewifFalse{vx@commaSortLead}% +% \end{macrocode} +% \end{macro} +% We use "\varindexCount" also for generic flags to save counters. +% \begin{macrocode} + \varindexCount=0\relax + \let\varindexStyle\toolboxEmpty + \let\varindexAppend\toolboxEmpty + \let\vx@text\toolboxEmpty + \let\vx@mainprogram\undefined + \let\vx@formatA\undefined + \let\vx@formatAstar\undefined + \let\varindexFormat\undefined + \let\varindexFormatDefault\undefined + \varindexNewFlag 1\varindexOneEntry + \varindexNewFlag *\varindexStarPos + \varindexTestAndExec(%optional formatA) + \vx@ReadFormatA%else + \vx@TestTextStyle} + +% \end{macrocode} +% \end{macro} +% \begin{macro}{\vx@ReadFormatA}\nocomment +% \begin{macrocode} +\def\vx@ReadFormatA(#1){% + \def\vx@formatA{#1}% + \varindexTestAndExec(%optional formatAstar) + \vx@ReadFormatAstar%else + \vx@SkipAndReadScan} + +% \end{macrocode} +% \end{macro} +% \begin{macro}{\vx@ReadFormatAstar}\nocomment +% \begin{macrocode} +\def\vx@ReadFormatAstar(#1){% + \def\vx@formatAstar{#1}\vx@SkipAndReadScan} + +% \end{macrocode} +% \end{macro} +% \begin{macro}{\vx@SkipAndReadScan}\nocomment +% \begin{macrocode} +\def\vx@SkipAndReadScan{\varindexSkipAndExec\vx@ReadScan} +% \end{macrocode} +% \end{macro} +% \begin{macro}{\vx@ReadScan}\nocomment +% \begin{macrocode} +\def\vx@ReadScan#1{#1\toolboxEmpty\varindexSkipAndExec\vx@ReadProgram} +% \end{macrocode} +% \end{macro} +% \begin{macro}{\vx@ReadProgram}\nocomment +% \begin{macrocode} +\def\vx@ReadProgram#1{\def\vx@mainprogram{#1}\vx@TestTextStyle} + +% \end{macrocode} +% \end{macro} +% \begin{macro}{\vx@TestTextStyle}\nocomment +% \begin{macrocode} +\def\vx@TestTextStyle{% + \varindexTestAndExec[%textstyle] + \vx@ReadTextStyle%else + \vx@TestFlags} + +% \end{macrocode} +% \end{macro} +% \begin{macro}{\vx@ReadTextStyle}\nocomment +% \begin{macrocode} +\def\vx@ReadTextStyle[#1]{% + \def\varindexStyle{#1}% + \varindexTestAndExec[%pagestyleA] + \vx@ReadPageStyleA%else + \vx@TestFlags} + +% \end{macrocode} +% \end{macro} +% \begin{macro}{\vx@ReadTextStyleA}\nocomment +% \begin{macrocode} +\def\vx@ReadPageStyleA[#1]{\def\varindexAppend{#1}\vx@TestFlags} + +% \end{macrocode} +% \end{macro} +% +% \begin{macro}{\vx@TestFlags} +% This macro starts the flag read loop. +% \begin{macrocode} +\def\vx@TestFlags{% +% \end{macrocode} +% In this loop, we use "\varindexCount" for the flag position. +% \begin{macrocode} + \varindexCount=0\relax + \varindexEndOfFlag} + +% \end{macrocode} +% "\varindexEndOfFlag" is the value of the `first to call' TestFlag... +% (which is actually the last TestFlag... defined) +% Let us first initialize it to TestFlag0: +% \begin{macrocode} +\varindexCount=0\relax +\expandafter +\def\expandafter\varindexEndOfFlag\expandafter{% + \csname vx@TestFlag\the\varindexCount\endcsname} +% \end{macrocode} +%Initialize the `last' "\vx@TestFlag0" as a macro with the meaning +%``start to read \meta{main entries}''. +% \begin{macrocode} +\expandafter +\def\varindexEndOfFlag{\varindexSkipAndExec\vx@ReadMain}% +% \end{macrocode} +% \end{macro} +% +% \begin{macro}{\vx@TestFlag0} +% "\vx@TestFlag0" is the first macro generated by "\varindexNewFlag". +% +% \begin{macro}{\varindexNewFlag} +% "\varindexNewFlag" calls "\vx@MakeNewFlag" with appropriate arguments: +% +% \begin{macrocode} +\def\varindexNewFlag#1#2{% + \let#2\undefined + \expandafter + \def\expandafter\vx@tmp\expandafter{% + \csname vx@TestFlag\the\varindexCount\endcsname #1#2}% + \advance\varindexCount by 1\relax +% \end{macrocode} +% A bug in \TeX? Without this "\relax", the next "\expandafter" +% is executed \emph{before} the counter is actually increased. +% \begin{macrocode} + \expandafter + \toolboxSurround\expandafter{% + \csname vx@TestFlag\the\varindexCount\expandafter\endcsname + \csname vx@ReadFlag\the\varindexCount\endcsname}{}\vx@tmp + \varindexTestAndExec[%program] + \vx@ReadFlagProgram%else + {\vx@MakeFlagProgram\varindexEndOfFlag}% +} +% \end{macrocode} +% \end{macro} +% \end{macro} +% \begin{macro}{\vx@ReadFlagProgram}\nocomment +% \begin{macrocode} +\def\vx@ReadFlagProgram[#1]{\vx@MakeFlagProgram{#1}} +% \end{macrocode} +% \end{macro} +% \begin{macro}{\vx@MakeFlagProgram}\nocomment +% \begin{macrocode} +\def\vx@MakeFlagProgram#1{\expandafter\vx@MakeNewFlag\vx@tmp{#1}} + +% \end{macrocode} +% \end{macro} +% +% \begin{macro}{\vx@MakeNewFlag} +% Usage: +% "\vx@MakeNewFlag\TestMacro\ReadMacro\PrevMacro\token\pos"\bracemeta{program} +% \begin{macrocode} +\def\vx@MakeNewFlag#1#2#3#4#5#6{% + \def\varindexEndOfFlag{#1}% + \def#1{\varindexTestAndExec#4{#2}{#3}}% + \def#2#4{\expandafter + \def\expandafter#5\expandafter{\the\varindexCount}% + \advance\varindexCount by 1\relax + \varindexSkipAndExec{#6}}% +} + +% \end{macrocode} +% \end{macro} +% \begin{macro}{\vx@ReadMain}\nocomment +% \begin{macrocode} +\long\def\vx@ReadMain#1{\def\vx@text{#1}% + \ifx\vx@formatA\undefined + \def\vx@exec{\varindexSkipAndExec\vx@ReadFormatB}% + \else + \def\vx@exec{% + \varindexTestAndExec[%FormatB] + \vx@ReadOptFormatB%else + {\ifvx@atespace\vx@savespacetrue\fi\vx@TestAppend}}% + \fi + \vx@exec} + +% \end{macrocode} +% \end{macro} +% \begin{macro}{\vx@ReadFormatB}\nocomment +% \begin{macrocode} +\def\vx@ReadFormatB#1{\def\varindexFormat{#1}\vx@TestAppend} +% \end{macrocode} +% \end{macro} +% \begin{macro}{\vx@ReadOptFormatB}\nocomment +% \begin{macrocode} +\def\vx@ReadOptFormatB[#1]{\def\varindexFormat{#1}\vx@TestAppend} + +% \end{macrocode} +% \end{macro} +% \begin{macro}{\vx@TestAppend}\nocomment +% \begin{macrocode} +\def\vx@TestAppend{% + \varindexTestAndExec[%Append] + {\vx@savespacefalse\vx@ReadAppend}%else + {\ifvx@atespace\vx@savespacetrue\fi\vx@Main}} + +% \end{macrocode} +% \end{macro} +% \begin{macro}{\vx@ReadAppend}\nocomment +% \begin{macrocode} +\def\vx@ReadAppend[#1]{\def\varindexAppend{#1}\vx@Main} + +% \end{macrocode} +% \end{macro} +% +% \begin{macro}{\varindexTestAndExec} +% "\varindexTestAndExec\Token"\bracemeta{ifpart}\bracemeta{elsepart} +% at the end of a macro: +% Steps forward in the token list as long as there are spaces. +% If a space is eaten, "\vx@atespace" is set true. +% The next (non-space) token is put into "\varindexNextToken". +% If this token is "\Token", then \meta{ifpart} is executed, otherwise +% \meta{elsepart}. +% \begin{macrocode} +\def\varindexTestAndExec#1#2#3{% + \varindexSkipAndExec{% + \ifx\varindexNextToken#1% + \def\vx@exec{#2}% + \else + \def\vx@exec{#3}% + \fi + \vx@exec}} + +% \end{macrocode} +% \end{macro} +% \begin{macro}{\varindexSkipAndExec} +% "\varindexSkipAndExec"\bracemeta{commands} at the end of a macro: +% Steps forward in the token list as long as there are spaces. +% The next (non-space) token is put into "\varindexNextToken". +% Then commands are executed. +% \begin{macrocode} +\def\varindexSkipAndExec#1{% + \vx@atespacefalse + \def\vx@skipexec{#1}% + \varindexArgumentSpace} + +% \end{macrocode} +% \end{macro} +% \begin{macro}{\varindexSkipDefault}\nocomment +% \begin{macrocode} +\def\varindexSkipDefault{\futurelet\varindexNextToken\vx@skipexec} + +% \end{macrocode} +% \end{macro} +% \begin{macro}{\varindexSkipTrickery}\nocomment +% \begin{macrocode} +\def\varindexSkipTricky{% + \vx@MakeSpaceOther\futurelet\varindexNextToken\vx@SkipLoopTest} +% \end{macrocode} +% \end{macro} +% \begin{macro}{\varindexSkipLoopTest}\nocomment +% \begin{macrocode} +\def\vx@SkipLoopTest{% + \vx@MakeSpaceSpace + \ifx\varindexNextToken\vx@spaceothertok + \def\vx@skipnext{\vx@gobblespace a}% + \else + \let\vx@skipnext\vx@skipexec + \fi + \vx@skipnext} +% \end{macrocode} +% \end{macro} +% \begin{macro}{\vx@gobblespace}\nocomment +% \begin{macrocode} +\def\vx@gobblespace a#1{\vx@atespacetrue\varindexSkipTricky} + +% \end{macrocode} +% \end{macro} +% +% \begin{macro}{\vx@Main} +% This macro is called after all arguments are read into appropriate macros. +% Now the macros will be parsed (possibly using the argument +% \meta{mainprogram}), and then the output is produced. +% Finally, the group is closed and a possible ``eaten space'' is put back. +% \begin{macrocode} +\def\vx@Main{% + \ifx\varindexStarPos\undefined + \varindexStarfalse + \else + \varindexStartrue + \fi + \ifx\vx@formatA\undefined +% \end{macrocode} +% The default format is empty if no default format is given +% \begin{macrocode} + \let\varindexFormatDefault\toolboxEmpty + \else + \ifvarindexStar + \ifx\vx@formatAstar\undefined + \let\varindexFormatDefault\vx@formatA + \else + \let\varindexFormatDefault\vx@formatAstar + \fi + \else + \let\varindexFormatDefault\vx@formatA + \fi + \fi +% \end{macrocode} +% Now we parse \meta{main entries}: +% \begin{macrocode} + \toolboxDef\vx@toparse{\vx@text\vx@word\vx@endparse}% + \ifx\varindexOneEntry\undefined + \varindexCount=0\relax + \let\vx@NextLoop\vx@TextLoop + \vx@TextLoop + \else + \varindexCount=1\relax + \ifvarindexEliminateOuterBrace + \toolboxDropBrace\vx@text + \fi + \expandafter\vx@TextEntry\expandafter{\vx@text}% + \fi + \expandafter + \def\expandafter\varindexLastEntry\expandafter{\the\varindexCount}% +% \end{macrocode} +% Now we expand the format(s): +% \begin{macrocode} + \varindexedef\varindexFormatDefault{\varindexFormatDefault}% + \ifx\varindexFormat\undefined + \varindexExplicitFormatfalse + \let\varindexFormat\varindexFormatDefault + \else + \varindexExplicitFormattrue + \varindexedef\varindexFormat{\varindexFormat}% + \fi +% \end{macrocode} +% Now we execute \meta{mainprogram}, and expand "\varindexFormat" again: +% \begin{macrocode} + \ifx\vx@mainprogram\undefined\else + \vx@mainprogram + \varindexedef\varindexFormat{\varindexFormat}% + \fi +% \end{macrocode} +% Still modify "\varindexFormat": +% \begin{macrocode} + \ifvarindexStar +% \end{macrocode} +% Prepend `"*"' resp. `"*"\myspace' +% \begin{macrocode} + \expandafter\varindexSplitAtOutput\expandafter{\varindexFormat}\vx@fa\vx@fb + \ifx\vx@fb\undefined +% \end{macrocode} +% The `"*"' does not occur in "\varindexFormat" +% \begin{macrocode} + \expandafter\varindexSplitAtIndex\expandafter{\varindexFormat}% + \vx@fa\vx@fb + \ifx\vx@fb\undefined +% \end{macrocode} +% We did not find a `space' +% \begin{macrocode} + \let\vx@fa\undefined + \fi + \ifx\vx@fa\toolboxEmpty +% \end{macrocode} +% Did we find a `space' immediately at the start? +% Then prepend only `"*"' +% \begin{macrocode} + \toolboxDef\varindexFormat{\varindexOutputString\varindexFormat}% + \else +% \end{macrocode} +% prepend `"*"\myspace' +% \begin{macrocode} + \toolboxDef\varindexFormat{% + \varindexOutputString\varindexIndexString\varindexFormat}% + \fi + \fi + \fi + \ifx\varindexFormat\varindexOutputString +% \end{macrocode} +% Replace `"*"' by `"*"\myspace' +% \begin{macrocode} + \toolboxDef\varindexFormat{\varindexOutputString\varindexIndexString}% + \fi +% \end{macrocode} +% Now we interpret "\varindexFormat" and produce the output: +% \begin{macrocode} + \ifx\varindexFormat\toolboxEmpty + \vx@FormatAll + \else + \toolboxDef\vx@toparse{\varindexFormat\varindexIndexString\vx@endparse}% + \let\vx@NextLoop\vx@FormLoop + \vx@FormLoop + \fi + \ifvx@savespace\aftergroup\space\fi +\endgroup} +% \end{macrocode} +% \end{macro} +% \begin{macro}{\vx@endparse} +% "\vx@endparse" is the end of the string to parse: +% \begin{macrocode} +\def\vx@endparse{\vx@endparse} + +% \end{macrocode} +% \end{macro} +% +% \begin{macro}{\vx@TextLoop} +% This is the (recursive) macro which parses \meta{main entries}. +% For each entry (separated by "\vx@word"), possibly with braces +% eliminated, the macro "\vx@TextEntry" is called. +% +% \begin{macrocode} +\def\vx@TextLoop{% + \ifx\vx@toparse\vx@endparse + \let\vx@NextLoop\toolboxEmpty + \else + \advance\varindexCount by 1\relax + \expandafter\vx@SplitAtWord\expandafter{\vx@toparse}% + \vx@textentry\vx@toparse + \ifvarindexEliminateOuterBrace + \toolboxDropBrace\vx@textentry + \fi + \expandafter\vx@TextEntry\expandafter{\vx@textentry}% + \fi + \vx@NextLoop} + +% \end{macrocode} +% \end{macro} +% \begin{macro}{\vx@FormLoop} +% This is the (recursive) macro which parses the \meta{format}. +% For each entry (separated by space or by "*") the function +% "\vx@Format" is called with "\varindexIndexMode" set correspondingly. +% \begin{macrocode} +\def\vx@FormLoop{% + \ifx\vx@toparse\vx@endparse + \let\vx@NextLoop\toolboxEmpty + \else + \expandafter\varindexSplitAtIndex\expandafter{\vx@toparse}\vx@fa\vx@fb + \expandafter\varindexSplitAtOutput\expandafter{\vx@fa}\vx@fa\vx@fc + \ifx\vx@fa\toolboxEmpty +% \end{macrocode} +% Have we reached an empty entry in the format string? +% \begin{macrocode} + \ifvx@firstiter%% In the first iteration, +%% \ifx\vx@fc\undefined% if 'space' is the very first sign, +%% \vx@FormatAll% we output everything +%% \fi + \else +% \end{macrocode} +% Later, we always output everything. +% \begin{macrocode} + \vx@FormatAll + \fi + \else +% \end{macrocode} +% Usually, we just work with our current entry +% \begin{macrocode} + \expandafter\vx@Format\expandafter{\vx@fa}% + \fi + \vx@firstiterfalse + \ifx\vx@fc\undefined +% \end{macrocode} +% If the first separating sign is 'space': +% \begin{macrocode} + \varindexIndexModetrue + \let\vx@toparse\vx@fb + \else +% \end{macrocode} +% If the first separating sign is "*": +% \begin{macrocode} + \varindexIndexModefalse + \expandafter + \varindexSplitAtOutput\expandafter{\vx@toparse}\vx@fa\vx@toparse + \fi + \fi + \vx@NextLoop} + +% \end{macrocode} +% \end{macro} +% +% \begin{macro}{\vx@FormatAll} +% This macro is as "\vx@Format", just that everything is output: +% \begin{macrocode} +\def\vx@FormatAll{% + \vx@FormatInit + \expandafter + \def\expandafter\vx@Count\expandafter{\the\varindexCount}\relax + \varindexCount=0\relax + \let\vx@NextFormatAllLoop\vx@FormatAllLoop + \vx@FormatAllLoop + \expandafter\varindexCount\expandafter=\vx@Count\relax + \vx@Write} + +% \end{macrocode} +% \end{macro} +% \begin{macro}{\vx@FormatAllLoop}\nocomment +% \begin{macrocode} +\def\vx@FormatAllLoop{% + \advance\varindexCount by 1\relax + \expandafter + \varindexAddNumber\expandafter{\the\varindexCount}% + \expandafter + \ifnum\varindexLastEntry=\varindexCount + \let\vx@NextFormatAllLoop\toolboxEmpty + \fi + \vx@NextFormatAllLoop} + +% \end{macrocode} +% \end{macro} +% \begin{macro}{\vx@AppendwithCount} +% The content of the variable "#2\the\varindexCount" is appended to "#1". +% If both, "#1" and "#2\the\varindexCount" are nonempty, a space +% is inserted between. +% \begin{macrocode} +\def\vx@AppendWithCount#1#2{% + \toolboxLet\vx@tmp{#2\the\varindexCount}% + \ifx#1\toolboxEmpty + \let#1\vx@tmp + \else + \ifx\vx@tmp\toolboxEmpty\else\toolboxAppend#1{\toolboxSpace\vx@tmp}\fi + \fi} + +% \end{macrocode} +% \end{macro} +% +% \begin{macro}{\vx@Format} +% This is the macro which parses the format string "#1" for one single +% output, either into index or into running text, depending on +% "\ifvarindexIndexMode". +% +% \begin{macrocode} +\def\vx@Format#1{% + \vx@FormatInit + \def\vx@fparse{#1}% + \toolboxAppend\vx@fparse\vx@endparse + \let\vx@FormatNextLoop\vx@FormatLoop + \vx@FormatLoop + \vx@Write +} + +% \end{macrocode} +% \end{macro} +% \begin{macro}{\vx@FormatInit}\nocomment +% \begin{macrocode} +\def\vx@FormatInit{% + \let\vx@outputlist\toolboxEmpty + \let\vx@textlist\toolboxEmpty + \let\vx@sortlist\toolboxEmpty + \let\vx@textlistBefore\toolboxEmpty + \let\vx@sortlistBefore\toolboxEmpty + \let\vx@tildeAText\varindexPlaceholderAText + \let\vx@tildeASort\varindexPlaceholderASort + \let\vx@tildeBText\varindexPlaceholderBText + \let\vx@tildeBSort\varindexPlaceholderBSort + \vx@tildeLeadtrue + \ifvarindexCommaExpand + \vx@commaTextLeadtrue + \vx@commaSortLeadtrue + \else + \vx@commaTextLeadfalse + \vx@commaSortLeadfalse + \fi + \varindexNoNextSpace +} + +% \end{macrocode} +% \end{macro} +% \begin{macro}{\vx@FormatLoop} +% "\vx@FormatLoop" is the main loop which parses one (space-separated) entry +% in the format string. The essential part here is the command +% "\vx@HandleFormat" which is described below. +% Essentially, "\vx@HandleFormat" is a list of subsequent calls to +% "\vx@condexec" +% \begin{macrocode} +\def\vx@FormatLoop{% + \vx@ffoundfalse + \ifx\vx@fparse\vx@endparse + \let\vx@FormatNextLoop\toolboxEmpty + \else + \vx@HandleFormat + \ifvx@ffound\else + \expandafter\vx@ErrorFormat\vx@fparse + \let\vx@FormatNextLoop\toolboxEmpty + \fi + \fi + \vx@FormatNextLoop +} + +% \end{macrocode} +% \end{macro} +% \begin{macro}{\vx@condexec}\nocomment +% \begin{macrocode} +\def\vx@condexec#1#2{\ifvx@ffound\else + \expandafter #1\expandafter{\vx@fparse}\vx@fparseA\vx@fparseB + \ifx\vx@fparseB\undefined\else + \ifx\vx@fparseA\toolboxEmpty + \let\vx@fparse\vx@fparseB + \vx@ffoundtrue + #2% + \fi + \fi +\fi} + +% \end{macrocode} +% \end{macro} +% \begin{macro}{\vx@HandleFormat} +% "\vx@HandleFormat" is a list of commands of the form +% "\vx@condexec"\bracemeta{splitcommand}\bracemeta{action}. +% The idea is that if \meta{splitcommand} splits at the `current' token +% of the format string then \meta{action} is executed. +% For details, see "\vx@condexec". +% The list "\vx@Handle" format is generated by "\varindexNewFormat". +% \begin{macrocode} +\let\vx@HandleFormat\toolboxEmpty + +% \end{macrocode} +% \end{macro} +% \begin{macro}{\varindexNewFormat} +% \begin{macrocode} +\def\varindexNewFormat#1#2{% + \toolboxSurround{\vx@condexec{#1}{#2}}{}\vx@HandleFormat} + +% \end{macrocode} +% \end{macro} +% Now we initialize the default actions for the format string. However, +% it is necessary to postpone the expansion of the "\vx@NewStdFormat" commands +% (which call "\varindexNewFormat") until "\varindexOutExclam" etc.\ have +% been initialized: In fact, the macro "\vx@NewStdFormat" uses "\csname" +% and thus implicitly sets those variables to "\relax" which conflicts with +% our initialization, because we define "\varindexOutExclam" and friends +% only if they are "\undefined" (so that we do not override previous user +% definitions of these macros).\par +% \begin{macrocode} +%% This macro is executed near the end of this file. +\def\varindexAddOmit{% The name is a fake: The macro redefines this macro +% \end{macrocode} +% \begin{macro}{\varindexAddSpace} +% "\varindexAddSpace" is made by a scheme from "\vx@NewStdFormat" +% \begin{macrocode} + \vx@NewStdFormat\varindexSplitAtSpace{Space}% +% \end{macrocode} +% \end{macro} +% \begin{macro}{\varindexAddSpTok} +% "\varindexAddSpTok" is made by a scheme from "\vx@NewStdFormat" +% \begin{macrocode} + \vx@NewStdFormat\varindexSplitAtSpaceTok{SpTok}% +% \end{macrocode} +% \end{macro} +% \begin{macro}{\varindexAddOmit} +% "\varindexAddOmit" is made by a scheme from "\vx@NewStdFormat" +% \begin{macrocode} + \vx@NewStdFormat\varindexSplitAtOmit{Omit}% +% \end{macrocode} +% \end{macro} +% \begin{macrocode} + \varindexNewFormat\varindexSplitSpace{}% Spaces in inner format are ignored + \varindexNewFormat\varindexSplitAtDash\varindexAddDash + \varindexNewFormat\varindexSplitAtTildeB\varindexAddTildeB + \varindexNewFormat\varindexSplitAtTildeA\varindexAddTildeA + \varindexNewFormat\varindexSplitAtComma\varindexAddComma + \varindexNewFormat\varindexSplitAtExclam\varindexAddExclam + \let\vx@NewStdFormat\undefined% We do not need this generic macro anymore +} + +% \end{macrocode} +% \begin{macro}{\vx@NewStdFormat} +% \begin{myquote} +% "\vx@NewStdFormat\"\meta{splitcmd}\bracemeta{name} +% \end{myquote} +% calls +% \begin{myquote} +% "\varindexNewFormat\"\meta{splitcmd}"\varindexAdd"\meta{name} +% \end{myquote} +% and defines the corresponding macro "\varindexAdd"\meta{name} by +% \begin{myquote} +% "\def\varindexAdd"\meta{name}"{\varindexPreceeds"\meta{name}\\ +% " \varindexTokensOutExpand"\\ +% " \varindexOutText"\meta{name}\\ +% " \varindexOutSort"\meta{name}\\ +% " \varindexFollows"\meta{name}"}" +% \end{myquote} +% \begin{macrocode} +\def\vx@NewStdFormat#1#2{% + \expandafter + \varindexNewFormat\expandafter#1\csname varindexAdd#2\endcsname + \expandafter + \def\expandafter\vx@tmp\expandafter{% + \csname varindexPreceeds#2\expandafter\endcsname + \expandafter + \varindexTokensOutExpand + \csname varindexOutText#2\expandafter\endcsname + \csname varindexOutSort#2\expandafter\endcsname + \csname varindexFollows#2\endcsname} + \expandafter\let\csname varindexAdd#2\endcsname\vx@tmp} + +% \end{macrocode} +% \end{macro} +% \begin{macro}{\varindexAddNumber}\nocomment +% \begin{macrocode} +\def\varindexAddNumber#1{% + \ifnum\varindexCount<#1% + \expandafter\vx@ErrorNumber\expandafter{\the\varindexCount}{#1}% + \fi + \ifvarindexIndexMode + \toolboxLet\vx@adda{varindexEntry#1}% + \toolboxLet\vx@addb{varindexSort#1}% + \else + \toolboxLet\vx@adda{varindexPlain#1}% + \fi + \vx@Addit\varindexSpaceTexttrue\varindexSpaceSorttrue} + +% \end{macrocode} +% \end{macro} +% \begin{macro}{\varindexAddDash} +% \begin{macrocode} +\def\varindexAddDash{% + \varindexPreceedsDash + \ifx\vx@sortlist\toolboxEmpty + \varindexTokensOutExpand\varindexOutTextDash\varindexOutSortDashBeg + \else + \varindexTokensOutExpand\varindexOutTextDash\varindexOutSortDash + \fi + \varindexFollowsDash} + +% \end{macrocode} +% \end{macro} +% \begin{macro}{\varindexAddComma}\nocomment +% \begin{macrocode} +\def\varindexAddComma{% + \ifvarindexCommaLeads + \vx@tildeLeadtrue + \fi + \ifvarindexCommaExpand + \let\vx@tildeAText\vx@textlist + \let\vx@tildeBText\vx@textlist + \ifvarindexIndexMode + \let\vx@tildeASort\vx@sortlist + \let\vx@tildeBSort\vx@sortlist + \fi + \fi + \varindexPreceedsComma + \varindexTokensOutExpand\varindexOutTextComma\varindexOutSortComma + \vx@flushToBefore + \ifvarindexCommaExpand + \vx@commaTextLeadtrue\vx@commaSortLeadtrue + \fi + \varindexFollowsComma} + +% \end{macrocode} +% \end{macro} +% \begin{macro}{\vx@flushToBefore}\nocomment +% \begin{macrocode} +\def\vx@flushToBefore{% + \ifvarindexCommaExpand + \toolboxAppend\vx@textlistBefore\vx@textlist + \let\vx@textlist\toolboxEmpty + \ifvarindexIndexMode + \toolboxAppend\vx@sortlistBefore\vx@sortlist + \let\vx@sortlist\toolboxEmpty + \fi + \fi} + +% \end{macrocode} +% \end{macro} +% \begin{macro}{\varindexAddTildeA}\nocomment +% \begin{macrocode} +\def\varindexAddTildeA{% + \ifvarindexUsePlaceholderA + \ifvx@tildeLead + \ifvarindexLeadingPlaceholderA + \vx@AddingTildeA + \fi + \else + \vx@AddingTildeA + \fi + \fi} +% \end{macrocode} +% \end{macro} +% \begin{macro}{\vx@AddingTildeA}\nocomment +% \begin{macrocode} +\def\vx@AddingTildeA{% + \ifvarindexPreviousAText + \let\vx@adda\vx@tildeAText + \else + \let\vx@adda\varindexPlaceholderAText + \fi + \ifvarindexPreviousASort + \let\vx@addb\vx@tildeASort + \else + \let\vx@addb\varindexPlaceholderASort + \fi + \vx@Addit\varindexSpaceTexttrue\varindexSpaceSorttrue} + +% \end{macrocode} +% \end{macro} +% \begin{macro}{\vx@AddTildeB}\nocomment +% \begin{macrocode} +\def\varindexAddTildeB{% + \ifvarindexUsePlaceholderB + \ifvx@tildeLead + \ifvarindexLeadingPlaceholderB + \vx@AddingTildeB + \fi + \else + \vx@AddingTildeB + \fi + \fi} +% \end{macrocode} +% \end{macro} +% \begin{macro}{\vx@AddingTildeB}\nocomment +% \begin{macrocode} +\def\vx@AddingTildeB{% + \ifvarindexPreviousBText + \let\vx@adda\vx@tildeBText + \else + \let\vx@adda\varindexPlaceholderBText + \fi + \ifvarindexPreviousBSort + \let\vx@addb\vx@tildeBSort + \else + \let\vx@addb\varindexPlaceholderBSort + \fi + \vx@Addit\varindexSpaceTexttrue\varindexSpaceSorttrue} + +% \end{macrocode} +% \end{macro} +% \begin{macro}{\varindexNextSpace}\nocomment +% \begin{macrocode} +\def\varindexNextSpace{\varindexSpaceTexttrue\varindexSpaceSorttrue} +% \end{macrocode} +% \end{macro} +% \begin{macro}{\varindexNoNextSpace}\nocomment +% \begin{macrocode} +\def\varindexNoNextSpace{\varindexSpaceTextfalse\varindexSpaceSortfalse} + +% \end{macrocode} +% \end{macro} +% \begin{macro}{\varindexTokensOut}\nocomment +% \begin{macrocode} +\long\def\varindexTokensOut#1#2{\def\vx@adda{#1}\def\vx@addb{#2}\vx@Addit{}{}} + +% \end{macrocode} +% \end{macro} +% \begin{macro}{\varindexTokensOutExpand}\nocomment +% \begin{macrocode} +\def\varindexTokensOutExpand#1#2{\let\vx@adda#1\let\vx@addb#2\vx@Addit{}{}} + +% \end{macrocode} +% \end{macro} +% \begin{macro}{\vx@Addit} +% \begin{myquote} +% "\vx@Addit"\bracemeta{command A}\bracemeta{command B} +% \end{myquote} +% Does the following if "\vx@adda"/"\vx@addb" is nonempty: +% \begin{myquote} +% Add (space +) "\vx@adda"/"\vx@addb" to "\vx@textlist"/"\vx@sortlist"\\ +% (Shift space to "\vx@...listBefore" if "\ifvx@comma...Lead" is true).\\ +% "\vx@tildeLeadfalse" (only if "\vx@adda" is nonempty)\\ +% "\varindexSpace...false"\\ +% "\vx@comma...Leadfalse"\\ +% Execute \meta{command A/B} +% \end{myquote} +% \begin{macrocode} +\def\vx@Addit#1#2{% + \ifx\vx@adda\toolboxEmpty\else + \vx@tildeLeadfalse + \ifvarindexSpaceText + \varindexSpaceTextfalse + \ifvx@commaTextLead + \toolboxAppend\vx@textlistBefore\toolboxSpace + \let\vx@textlist\vx@adda + \else + \toolboxAppend\vx@textlist{\toolboxSpace\vx@adda}% + \fi + \else + \toolboxAppend\vx@textlist\vx@adda + \fi + \vx@commaTextLeadfalse + #1% + \fi + \ifvarindexIndexMode + \ifx\vx@addb\toolboxEmpty\else + \ifvarindexSpaceSort + \varindexSpaceSortfalse + \ifvx@commaSortLead + \toolboxAppend\vx@sortlistBefore\toolboxSpace + \let\vx@sortlist\vx@addb + \else + \toolboxAppend\vx@sortlist{\toolboxSpace\vx@addb}% + \fi + \else + \toolboxAppend\vx@sortlist\vx@addb + \fi + \vx@commaSortLeadfalse + #2% + \fi + \fi} + +% \end{macrocode} +% \end{macro} +% \begin{macro}{\varindexAddExclam}\nocomment +% \begin{macrocode} +\def\varindexAddExclam{% + \ifvarindexIndexMode + \vx@Flush + \toolboxAppend\vx@outputlist\varindexOutExclam + \else + \errmessage{\string\varindex: % + Subitem can only be used for index, not for running text}% + \fi + \varindexFollowsExclam +} + +% \end{macrocode} +% \end{macro} +% \begin{macro}{\vx@ErrorFormat}\nocomment +% "\vx@ErrorFormat" outputs the format until the content of "\vx@endparse" is +% reached. +% \begin{macrocode} +\expandafter +\def\expandafter\vx@ErrorFormat\expandafter#\expandafter 1\vx@endparse + {\errmessage{\string\varindex: Error in format `#1'}} + +% \end{macrocode} +% \end{macro} +% \begin{macro}{\vx@ErrorNumber}\nocomment +% \begin{macrocode} +\def\vx@ErrorNumber#1#2{\errmessage{\string\varindex: % + Entry `#2' does not exist (only #1 entries)}} + +% \end{macrocode} +% \end{macro} +% +% \begin{macro}{\vx@Write} +% The main output macro (either into "\index" or into running text): +% +% \begin{macrocode} +\def\vx@Write{% + \vx@Flush + \ifvarindexIndexMode + \toolboxAppend\vx@outputlist\varindexAppend + \vx@MakeHarmless\vx@outputlist + \expandafter + \varindexIndex\expandafter{\vx@outputlist}% + \else + \expandafter + \varindexStyle\expandafter{\vx@outputlist}% + \fi} + +% \end{macrocode} +% \end{macro} +% \begin{macro}{\vx@Flush} +% Put the text buffered in "\vx@textlistBefore\vx@textlist" and +% "\vx@sortlistBefore\vx@sortlist" to "\vx@outputlist" in the way appropriate +% fot the output, and delete the buffers. +% Moreover, prepare "\vx@tilde?Text" and friends correspondingly. +% +% \begin{macrocode} +\def\vx@Flush{% + \vx@tildeLeadtrue + \vx@commaTextLeadtrue + \vx@commaSortLeadtrue + \let\vx@tildeAText\vx@textlist + \let\vx@tildeBText\vx@textlist + \ifvarindexIndexMode + \let\vx@tildeASort\vx@sortlist + \let\vx@tildeBSort\vx@sortlist + \toolboxDef\vx@textlist{\vx@textlistBefore\vx@textlist}% + \toolboxDef\vx@sortlist{\vx@sortlistBefore\vx@sortlist}% + \ifx\vx@textlist\vx@sortlist + \toolboxAppend\vx@outputlist\vx@textlist + \else + \toolboxAppend\vx@outputlist{\vx@sortlist\vx@otherat\vx@textlist}% + \fi + \let\vx@sortlistBefore\toolboxEmpty + \let\vx@sortlist\toolboxEmpty + \else + \toolboxAppend\vx@outputlist{\vx@textlistBefore\vx@textlist}% + \fi + \let\vx@textlistBefore\toolboxEmpty + \let\vx@textlist\toolboxEmpty} + +% \end{macrocode} +% \end{macro} +% +% \begin{macro}{\vx@TextEntry} +% "\vx@TextEntry"\bracemeta{\texttt{\#1}} defines +% "\varindexEntry"/"Sort"/"Plain1-..." +% with the values corresponding to entry "#1". Here, "1-..." is +% "\the\varindexCount". If necessary, inner braces are eliminated +% +% \begin{macrocode} +\def\vx@TextEntry#1{% + \vx@SplitAtSort{#1}\vx@textEntryA\vx@textEntryB + \expandafter\vx@SplitAtPlain\expandafter{\vx@textEntryA}% + \vx@textEntryA\vx@textEntryC + \vx@LetEliminated{varindexEntry}\vx@textEntryA + \ifx\vx@textEntryB\undefined +% \end{macrocode} +% No sort entry: +% \begin{macrocode} + \vx@LetEliminated{varindexSort}\vx@textEntryA + \ifx\vx@textEntryC\undefined + \vx@LetEliminated{varindexPlain}\vx@textEntryA + \else + \vx@LetEliminated{varindexPlain}\vx@textEntryC + \fi + \else +% \end{macrocode} +% Sort entry: +% \begin{macrocode} + \ifx\vx@textEntryC\undefined + \expandafter\vx@SplitAtPlain\expandafter{\vx@textEntryB}% + \vx@textEntryB\vx@textEntryC + \fi + \vx@LetEliminated{varindexSort}\vx@textEntryB + \ifx\vx@textEntryC\undefined + \vx@LetEliminated{varindexPlain}\vx@textEntryA + \else + \vx@LetEliminated{varindexPlain}\vx@textEntryC + \fi + \fi +} +% \end{macrocode} +% \end{macro} +% \begin{macro}{\vx@LetEliminated}\nocomment +% \begin{macrocode} +\def\vx@LetEliminated#1#2{% + \let\vx@tmp#2% + \ifvarindexEliminateInnerBrace + \toolboxDropBrace\vx@tmp + \fi + \toolboxWithNr{\the\varindexCount}\let{#1}\vx@tmp} + +% \end{macrocode} +% \end{macro} +% \begin{macro}{\varindexMakeVarSplit}\nocomment +% \begin{macrocode} +\def\varindexMakeVarSplit#1#2#3{\varindexedef#1{#2}\expandafter + \toolboxMakeSplit\expandafter{#1}{#3}} +% \end{macrocode} +% \end{macro} +% \begin{macro}{\varindexMakeSplitExpand}\nocomment +% \begin{macrocode} +\def\varindexMakeSplitExpand#1#2{\varindexMakeVarSplit\vx@tmp{#1}{#2}} + +% \end{macrocode} +% \end{macro} +% \begin{macro}{\varindexSetWordString} +% \begin{macro}{\vx@SplitAtWord}\nocomment +% \begin{macrocode} +\def\varindexSetWordString#1{\def\vx@word{#1}% + \toolboxMakeSplit{#1}{vx@SplitAtWord}} +% \end{macrocode} +% \end{macro} +% \end{macro} +% \begin{macro}{\varindexSetSortString} +% \begin{macro}{\vx@SplitAtSort}\nocomment +% \begin{macrocode} +\def\varindexSetSortString#1{% + \toolboxMakeSplit{#1}{vx@SplitAtSort}} +% \end{macrocode} +% \end{macro} +% \end{macro} +% \begin{macro}{\varindexSetPlainString} +% \begin{macro}{\vx@SplitAtPlain}\nocomment +% \begin{macrocode} +\def\varindexSetPlainString#1{% + \toolboxMakeSplit{#1}{vx@SplitAtPlain}} + +% \end{macrocode} +% \end{macro} +% \end{macro} +% \begin{macro}{\vx@tmp} +% Temporarily, we define a generic command: +% \begin{myquote} +% "\vx@tmp"\bracemeta{name} +% \end{myquote} +% is (temporarily) a call which is equivalent to: +% \begin{myquote} +% "\def\varindexSet"\meta{name}"String#1{%"\\ +% " \varindexMakeVarSplit"\relax +%"\varindex"\meta{name}"String{#1}{varindexSplitAt"\meta{name}"}}" +% \end{myquote} +% \begin{macrocode} +\def\vx@tmp#1{% + \expandafter + \def\expandafter\vx@adda\expandafter##\expandafter 1\expandafter{% + \expandafter + \varindexMakeVarSplit\csname varindex#1String\endcsname + {##1}{varindexSplitAt#1}}% + \expandafter + \let\csname varindexSet#1String\endcsname\vx@adda} +% \end{macrocode} +% \end{macro} +% \begin{macro}{\varindexSetIndexString} +% \begin{macro}{\varindexSplitAtIndex}\nocomment +% \begin{macrocode} +\vx@tmp{Index} +% \end{macrocode} +% \end{macro} +% \end{macro} +% \begin{macro}{\varindexSetOutputString} +% \begin{macro}{\varindexSplitAtOutput}\nocomment +% \begin{macrocode} +\vx@tmp{Output} +% \end{macrocode} +% \end{macro} +% \end{macro} +% \begin{macro}{\varindexSetTildeAString} +% \begin{macro}{\varindexSplitAtTildeA}\nocomment +% \begin{macrocode} +\vx@tmp{TildeA} +% \end{macrocode} +% \end{macro} +% \end{macro} +% \begin{macro}{\varindexSetTildeBString} +% \begin{macro}{\varindexSplitAtTildeB}\nocomment +% \begin{macrocode} +\vx@tmp{TildeB} +% \end{macrocode} +% \end{macro} +% \end{macro} +% \begin{macro}{\varindexSetSpaceString} +% \begin{macro}{\varindexSplitAtSpace}\nocomment +% \begin{macrocode} +\vx@tmp{Space} +% \end{macrocode} +% \end{macro} +% \end{macro} +% \begin{macro}{\varindexSetSpaceTokString} +% \begin{macro}{\varindexSplitAtSpaceTok}\nocomment +% \begin{macrocode} +\vx@tmp{SpaceTok} +% \end{macrocode} +% \end{macro} +% \end{macro} +% \begin{macro}{\varindexSetOmitString} +% \begin{macro}{\varindexSplitAtOmit}\nocomment +% \begin{macrocode} +\vx@tmp{Omit} +% \end{macrocode} +% \end{macro} +% \end{macro} +% \begin{macro}{\varindexSetCommaString} +% \begin{macro}{\varindexSplitAtComma}\nocomment +% \begin{macrocode} +\vx@tmp{Comma} +% \end{macrocode} +% \end{macro} +% \end{macro} +% \begin{macro}{\varindexSetDashString} +% \begin{macro}{\varindexSplitAtDash}\nocomment +% \begin{macrocode} +\vx@tmp{Dash} +% \end{macrocode} +% \end{macro} +% \end{macro} +% \begin{macro}{\varindexSetExclamString} +% \begin{macro}{\varindexSplitAtExclam}\nocomment +% \begin{macrocode} +\vx@tmp{Exclam} + +% \end{macrocode} +% \end{macro} +% \end{macro} +% \begin{macro}{\varindexSetStringForNr} +% \begin{macro}{\varindexSplitAtNr}\nocomment +% \begin{macrocode} +\def\varindexSetStringForNr#1#2{% + \edef\vx@adda{#1}% + \expandafter + \vx@AddToHandleNrs\csname varindexSplitAtNr\vx@adda\endcsname +% \end{macrocode} +% It is important to define the instance only \emph{after} the call of +% "\vx@AddToHandleNrs" (because this macro tests the existence). +% \begin{macrocode} + \expandafter + \varindexMakeVarSplit\csname varindexNr\vx@adda String\endcsname + {#2}{varindexSplitAtNr\vx@adda}} + +% \end{macrocode} +% \end{macro} +% \end{macro} +% +% \begin{macro}{\vx@AddToHandleNrs} +% "\vx@AddToHandleNrs{\vx@HandleNr1}" +% tests whether "\vx@HandleNr1" is already defined: +% If not (i.\,e.\ "\relax" because we use it with "\csname") the call +% \begin{myquote} +% "\varindexNewFormat\varindexSplitAtNr1{\varindexAddNumber"\relax +%\bracemeta{content of \cmdcite{vx@adda}}"}" +% \end{myquote} +% is executed. +% \begin{macrocode} +\def\vx@AddToHandleNrs#1{% + \ifx#1\relax + \expandafter + \varindexNewFormat\expandafter#1\expandafter{\expandafter + \varindexAddNumber\expandafter{\vx@adda}}% + \fi} + +% \end{macrocode} +% \end{macro} +% +% \begin{macro}{\varindexedef} +% This macro is described in the main documentation. +% \begin{macrocode} +\def\varindexedef#1#2{% + \let\vx@tildemerk~% + \let~\vx@nicetilde + \edef#1{#2}% + \let~\vx@tildemerk} + +% \end{macrocode} +% \end{macro} +% +% \begin{macro}{\varindexDoConvert}\nocomment +% \begin{macrocode} +\def\varindexDoConvert{\let\vx@MakeHarmless\toolboxMakeHarmless} + +% \end{macrocode} +% \end{macro} +% \begin{macro}{\varindexNoConvert}\nocomment +% \begin{macrocode} +\def\varindexNoConvert{\def\vx@MakeHarmless##1{}} + +% \end{macrocode} +% \end{macro} +% +% +% \par\hrule\par\null\par +% Finally, some definitions which require catcode-trickery: +% +% +% \begin{macro}{\vx@nicetilde} +% "\vx@nicetilde" expands to a tilde with a nonactive catcode. +% +% \begin{macrocode} +\def\vx@tmp{\catcode`\~=13\relax} +\catcode`\~=11\relax\def\vx@nicetilde{~}\vx@tmp + +% \end{macrocode} +% \end{macro} +% \begin{macro}{\vx@spaceothertok} +% \begin{macro}{\vx@MakeSpaceOther}\nocomment +% \begin{macrocode} +\def\vx@MakeSpaceOther{\catcode`\ =13\relax} +% \end{macrocode} +% \end{macro} +% \begin{macro}{\vx@MakeSpaceSpace}\nocomment +% \begin{macrocode} +\def\vx@MakeSpaceSpace{\catcode`\ =10\relax} +\vx@MakeSpaceOther%<- This % is important +\let\vx@spaceothertok= %<- This ` %' is important +\vx@MakeSpaceSpace + +% \end{macrocode} +% \end{macro} +% \end{macro} +% \begin{macro}{\vx@otherat} +% "\def\vx@otherat{@}" is a bad idea, since then +% "@" has the wrong catcode. So we use a temporary macro to define it: +% We misuse the name "\varindexArgumentSpace" to this purpose. +% Of course, we must redefine the latter afterwards. +% \begin{macrocode} +\def\varindexArgumentSpace#1{\def\vx@otherat{#1}} +\ifx\makeatother\undefined\catcode`\@=12\relax\else\makeatother\fi +\varindexArgumentSpace{@} + +% \end{macrocode} +% \end{macro} +% +% Initialize default values (you should have the `usual' catcodes here. +% In particular, "\makeatother" must be called before if `"@"' +% is used as argument). +% \begin{macro}{\varindexArgumentSpace}\nocomment +% \begin{macrocode} +\let\varindexArgumentSpace\varindexSkipDefault + +% \end{macrocode} +% \end{macro} +% \begin{macro}{\varindexIndex} +% We use "\def" for "\varindexIndex" so that a redefinition of "\index" also +% redefines our command. +% \begin{macrocode} +\toolboxIf\undefined\def\varindexIndex{\index} + +% \end{macrocode} +% \end{macro} +% \begin{macro}{\vx@MakeHarmless}\nocomment +% \begin{macrocode} +\varindexDoConvert + +% \end{macrocode} +% \end{macro} +% \begin{macrocode} +\toolboxIf\undefined\def\varindexOutExclam{!} +\toolboxIf\undefined\let\varindexFollowsExclam\varindexNoNextSpace +\toolboxIf\undefined\def\varindexOutTextComma{,} +\toolboxIf\undefined\def\varindexOutSortComma{,} +\toolboxIf\undefined\let\varindexFollowsComma\varindexNextSpace +\toolboxIf\undefined\let\varindexPreceedsComma\varindexNoNextSpace +\toolboxIf\undefined\def\varindexOutTextSpace{ } +\toolboxIf\undefined\def\varindexOutSortSpace{ } +\toolboxIf\undefined\let\varindexFollowsSpace\toolboxEmpty +\toolboxIf\undefined\let\varindexPreceedsSpace\varindexNoNextSpace +\toolboxIf\undefined\def\varindexOutTextSpTok{\space} +\toolboxIf\undefined\def\varindexOutSortSpTok{ } +\toolboxIf\undefined\let\varindexFollowsSpTok\toolboxEmpty +\toolboxIf\undefined\let\varindexPreceedsSpTok\varindexNoNextSpace +\toolboxIf\undefined\def\varindexOutTextDash{-} +\toolboxIf\undefined\def\varindexOutSortDash{-} +\toolboxIf\undefined\let\varindexOutSortDashBeg\toolboxEmpty +\toolboxIf\undefined\let\varindexFollowsDash\toolboxEmpty +\toolboxIf\undefined\let\varindexPreceedsDash\varindexNoNextSpace +\toolboxIf\undefined\let\varindexOutTextOmit\toolboxEmpty +\toolboxIf\undefined\let\varindexOutSortOmit\toolboxEmpty +\toolboxIf\undefined\let\varindexFollowsOmit\toolboxEmpty +\toolboxIf\undefined\let\varindexPreceedsOmit\varindexNoNextSpace +% \end{macrocode} +% For the following macro, see the remarks in the definition of +% the fake name "\varindexAddOmit" (after definition of "\varindexNewFormat") +% \begin{macrocode} +%% It is important that the following is after all \toolboxIf\undefined... +\varindexAddOmit% Execute the fake macro and redefine \varindexAddOmit + +% \end{macrocode} +% +% \begin{macro}{\varindexSplitSpace}\nocomment +% \begin{macrocode} +\toolboxMakeSplit{ }{varindexSplitSpace} + +% \end{macrocode} +% \end{macro} +% +% \begin{macrocode} +\varindexSetWordString{ } +\varindexSetSortString{@} +\varindexSetPlainString{!} + +\varindexSetIndexString{ } +\varindexSetOutputString{*} + +\varindexSetTildeAString{~} +\varindexSetTildeBString{=} +\varindexSetSpaceString{_} +\varindexSetSpaceTokString{s} +\varindexSetOmitString{.} +\varindexSetCommaString{,} +\varindexSetDashString{-} +\varindexSetExclamString{!} +\varindexSetStringForNr{10}{0} +\varindexSetStringForNr 9{9} +\varindexSetStringForNr 8{8} +\varindexSetStringForNr 7{7} +\varindexSetStringForNr 6{6} +\varindexSetStringForNr 5{5} +\varindexSetStringForNr 4{4} +\varindexSetStringForNr 3{3} +\varindexSetStringForNr 2{2} +\varindexSetStringForNr 1{1} + +\ifx\makeatletter\undefined\catcode`\@=11\relax\else\makeatletter\fi + +% \end{macrocode} +% \iffalse +% +% \fi +% \Finale\PrintIndex +% +% +% +% \iffalse +%<*metainfo> +% \fi +\iffalse ------------------------------------------------------------- +% +% Just in case that for some reason the file `varindex.ins' got lost: +% The content of this file is between the lines %<*insfile> and %: +% +%\iffalse +% +%<*insfile> +\def\batchfile{varindex.ins} +\input docstrip.tex +\keepsilent +\nopreamble +\generateFile{varindex.sty}{f}{\from{varindex.dtx}{package}} +\generateFile{varindex.txt}{f}{\from{varindex.dtx}{asciidocu}} +\generateFile{varindex.tex}{f}{\from{varindex.dtx}{driver}} +%%\generateFile{varindex.ins.dup}{f}{\from{varindex.dtx}{insfile}} + +\Msg{***************************************************************} +\Msg{*} +\Msg{* To finish the installation you have to move the} +\Msg{* file 'varindex.sty' into a directory searched by TeX.} +\Msg{*} +\Msg{*} +\Msg{* Run the file varindex.tex through LaTeX to produce the} +\Msg{* documentation or read the ascii documentation in varindex.txt} +\Msg{*} +\Msg{*} +\Msg{***************************************************************} +\endbatchfile +% +%<*metainfo> +% \fi +\fi +% \iffalse +% +% \fi +\endinput + +%%% Local Variables: +%%% mode: latex +%%% TeX-master: "varindex.tex" +%%% End: diff --git a/macros/latex/contrib/varindex/varindex.ins b/macros/latex/contrib/varindex/varindex.ins new file mode 100644 index 0000000000..1effe3fd4e --- /dev/null +++ b/macros/latex/contrib/varindex/varindex.ins @@ -0,0 +1,21 @@ +\def\batchfile{varindex.ins} +\input docstrip.tex +\keepsilent +\nopreamble +\generateFile{varindex.sty}{f}{\from{varindex.dtx}{package}} +\generateFile{varindex.txt}{f}{\from{varindex.dtx}{asciidocu}} +\generateFile{varindex.tex}{f}{\from{varindex.dtx}{driver}} +%%\generateFile{varindex.ins.dup}{f}{\from{varindex.dtx}{insfile}} + +\Msg{***************************************************************} +\Msg{*} +\Msg{* To finish the installation you have to move the} +\Msg{* file 'varindex.sty' into a directory searched by TeX.} +\Msg{*} +\Msg{*} +\Msg{* Run the file varindex.tex through LaTeX to produce the} +\Msg{* documentation or read the ascii documentation in varindex.txt} +\Msg{*} +\Msg{*} +\Msg{***************************************************************} +\endbatchfile diff --git a/macros/latex/contrib/varindex/varindex.pdf b/macros/latex/contrib/varindex/varindex.pdf new file mode 100644 index 0000000000..6b51276591 Binary files /dev/null and b/macros/latex/contrib/varindex/varindex.pdf differ -- cgit v1.2.3