From 33f4ae660b866731387e4c21e528aaa283009d6c Mon Sep 17 00:00:00 2001 From: Norbert Preining Date: Mon, 24 Feb 2020 03:01:26 +0000 Subject: CTAN sync 202002240301 --- macros/latex/contrib/ntgclass/ntgclass.dtx | 4 +- macros/latex/contrib/ntgclass/ntgstyle.pdf | Bin 79755 -> 0 bytes macros/latex/contrib/ntgclass/ntgstyle.tex | 128 - macros/latex/contrib/ntgclass/rapport.dtx | 3560 ---------------------------- macros/latex/contrib/ntgclass/wijzer.dtx | 3560 ---------------------------- 5 files changed, 2 insertions(+), 7250 deletions(-) delete mode 100644 macros/latex/contrib/ntgclass/ntgstyle.pdf delete mode 100644 macros/latex/contrib/ntgclass/ntgstyle.tex delete mode 100644 macros/latex/contrib/ntgclass/rapport.dtx delete mode 100644 macros/latex/contrib/ntgclass/wijzer.dtx (limited to 'macros/latex/contrib/ntgclass') diff --git a/macros/latex/contrib/ntgclass/ntgclass.dtx b/macros/latex/contrib/ntgclass/ntgclass.dtx index b8322eb68f..3c906338de 100644 --- a/macros/latex/contrib/ntgclass/ntgclass.dtx +++ b/macros/latex/contrib/ntgclass/ntgclass.dtx @@ -59,7 +59,7 @@ %<*driver> \ProvidesFile{ntgclass.drv} % - [2020/02/22 v2.1c + [2020/02/22 v2.1d % NTG LaTeX document class] %<10pt|11pt|12pt> NTG LaTeX file (size option)] % \end{macrocode} @@ -5399,4 +5399,4 @@ % \Finale % \endinput -% \ No newline at end of file +% diff --git a/macros/latex/contrib/ntgclass/ntgstyle.pdf b/macros/latex/contrib/ntgclass/ntgstyle.pdf deleted file mode 100644 index 9329ad1b60..0000000000 Binary files a/macros/latex/contrib/ntgclass/ntgstyle.pdf and /dev/null differ diff --git a/macros/latex/contrib/ntgclass/ntgstyle.tex b/macros/latex/contrib/ntgclass/ntgstyle.tex deleted file mode 100644 index 3dd634ee0e..0000000000 --- a/macros/latex/contrib/ntgclass/ntgstyle.tex +++ /dev/null @@ -1,128 +0,0 @@ -\documentstyle[a4]{artikel1} % or just 'article' -\begin{document} - -\title{An introduction to the Dutch \LaTeX\ styles} -\author{Victor Eijkhout} -\date{3 September 1989} -\maketitle - -\section{Background} - -The Dutch \LaTeX\ styles are an attempt to provide -\LaTeX\ users with facilities of the standard distribution -styles `article' and `report', -but coupled to typography that is geared towards Dutch usage. -In order to ensure interchangeability, the new styles -implemented the commands of the distribution styles. -In principle, then, no manual for these styles would be needed. -There are a few points, however, that can't go without -comment. - -Table 1 lists all files connected with the Dutch styles. -These files can be found on the {\tt tex-nl} fileserver -on the {\tt hearn} node of Bitnet/Earn. -Not all of them are necessary, the ones with extension {\tt .tex} -contain just blah. - -Remark: there exists a Dutch version of `letter', which is so -specifically Dutch that I decided not to include it in this list. - -\begin{table}[bp]\begin{center}\begin{tabular}{|@{\tt\hspace{1em}}r|l|} - \hline - artikel1.sty & article compatible, design 1, straightforward \\ - artikel2.sty & article compatible, design 2, rather different \\ - artikel3.sty & article compatible, design 3, - parskip instead of indent\\ - rapport1.sty & report compatible, design 1 \\ - rapport3.sty & report compatible, design 3 \\ - book.sty & book compatible, design 1, under development\\ - ntg10.sty & 10 point option for all styles \\ - ntg11.sty & 11 point option for all styles \\ - ntg12.sty & 12 point option for all styles \\ - voorwerk.sty & Dutch version of titlepage, needed for `rapport$x$' \\ - a4.sty & page size for European norm A4 paper.\\ - ntgstyle.tex & this story \\ - artdoc.tex & the genesis of the `artikel' styles, in Dutch \\ - rapdoc.tex & the genesis of the `rapport' styles, also in Dutch.\\ - \hline \end{tabular}\end{center} -\caption{List of files} -\end{table} - - -\section{Languages} - -These styles have been developed bearing in mind suggestions -of Hubert Partl for making the language of styles switchable. -Thus, on their own these styles will produce English captions -like `chapter' and `table of contents', but specifying -the options `dutch' or `german', or any language option -that follows the directions of Partl, will switch these -to the language of the option. - - -\section{Design} - -At the moment there are styles compatible with `article' and -with `report'. The Dutch names for these are `artikel' -and `rapport'. In contrast to the standard styles, however, -the user can now choose from different visual designs. -Names of the styles are formed by appending their number -to the name, for instance `rapport3'. -\begin{enumerate} -\item Design one is meant to be a universally acceptable style. -It has been kept as uncontroversial as possible. -Under heavy protests of the implementer (me) the one -point that has turned out to be controversial, the table -of contents, has been made subject to a switch that can -restore the old \LaTeX\ layout. Explanation of this follows. -\item Design two will probably never be heavily used. It is -more something of a heroic attempt to be different. At the -moment only available in `artikel' form. -\item Design three meets the wishes of people who like -a zero \verb.\parindent. and a positive \verb.\parskip.. -As just setting these parameters within for instance `artikel1' -will give some unwanted side effects, I~decided to repair -these in a separate style. -\end{enumerate} -Credits for the visual design go to one real-life designer -and a couple of books by designers I consulted. -The full story can be found elsewhere. - -\subsection{User options} - -As was mentioned above, the new layout of the table -of contents has turned out to be somewhat controversial. -So, in order to ensure wider acceptance of these styles -I~have incorporated a switch that will restore the -old layout. Just specify the {\tt oldtoc} option. -This is available in designs 1 and~3. Number~2 really -insists on being different. - -I~do no page sizing, so kindly use an option like {\tt a4}. -There is a nice one on the server, which is not the one -by John Pavel. - -\subsection{Option files} - -Like in the standard styles there exist option files for -$10/11/12$ point layout. Until now, however, I~have -managed to get away with using the same option files -for both the `artikel' `rapport', and `boek' styles. -The option files then have to have some neutral -names. Which are at the moment {\tt ntg10}, {\tt ntg11}, -and~{\tt ntg12}. `NTG', of course, stands for Nederlandse -\TeX\ Gebruikersgroep, i.e., Dutch \TeX\ Users Group. - -When doing the `rapport' styles, I~needed to modify -the `titlpage' option file. Thus there is a Dutch -version of that, bearing the name of `voorwerk' -(literal translation: `frontwork'). -Probably the majority of Dutch \LaTeX\ users -don't even know that this is the correct term. -You're never too old to learn. - - - - -\end{document} - diff --git a/macros/latex/contrib/ntgclass/rapport.dtx b/macros/latex/contrib/ntgclass/rapport.dtx deleted file mode 100644 index 9033f939ac..0000000000 --- a/macros/latex/contrib/ntgclass/rapport.dtx +++ /dev/null @@ -1,3560 +0,0 @@ -% \CheckSum{0} -% -% -% \iffalse -%<*dtx> -\Providesfile{wijzer.dtx} -% -%\NeedsTeXFormat{LaTeX2e} -%\ProvidesClass{wijzer} -%\ProvidesFile{wijzer.drv} -%\Providesfile{wijzer.dtx} - [PTT Research computer handboeken] -% -%<*driver> -\documentclass{ptt-ltxdoc} -\usepackage[dutch]{babel} -\CodelineNumbered -\CodelineIndex -\EnableCrossrefs -\DoNotIndex{\',\.,\@M,\@@input,\@addtoreset,\@arabic,\@badmath} -\DoNotIndex{\@centercr,\@cite} -\DoNotIndex{\@dotsep,\@empty,\@float,\@gobble,\@gobbletwo,\@ignoretrue} -\DoNotIndex{\@input,\@ixpt,\@m} -\DoNotIndex{\@minus,\@mkboth,\@ne,\@nil,\@nomath,\@plus,\@set@topoint} -\DoNotIndex{\@tempboxa,\@tempcnta,\@tempdima,\@tempdimb} -\DoNotIndex{\@tempswafalse,\@tempswatrue,\@viipt,\@viiipt,\@vipt} -\DoNotIndex{\@vpt,\@warning,\@xiipt,\@xipt,\@xivpt,\@xpt,\@xviipt} -\DoNotIndex{\@xxpt,\@xxvpt,\\,\ ,\addpenalty,\addtolength,\addvspace} -\DoNotIndex{\advance,\Alph,\alph} -\DoNotIndex{\arabic,\ast,\begin,\begingroup,\bfseries,\bgroup,\box} -\DoNotIndex{\bullet} -\DoNotIndex{\cdot,\cite,\CodelineIndex,\cr,\day,\DeclareOption} -\DoNotIndex{\def,\DisableCrossrefs,\divide,\DocInput,\documentclass} -\DoNotIndex{\DoNotIndex,\egroup,\ifdim,\else,\fi,\em,\endtrivlist} -\DoNotIndex{\EnableCrossrefs,\end,\end@dblfloat,\end@float,\endgroup} -\DoNotIndex{\endlist,\everycr,\everypar,\ExecuteOptions,\expandafter} -\DoNotIndex{\fbox} -\DoNotIndex{\filedate,\filename,\fileversion,\fontsize,\framebox,\gdef} -\DoNotIndex{\global,\halign,\hangindent,\hbox,\hfil,\hfill,\hrule} -\DoNotIndex{\hsize,\hskip,\hspace,\hss,\if@tempswa,\ifcase,\or,\fi,\fi} -\DoNotIndex{\ifhmode,\ifvmode,\ifnum,\iftrue,\ifx,\fi,\fi,\fi,\fi,\fi} -\DoNotIndex{\input} -\DoNotIndex{\jobname,\kern,\leavevmode,\let,\leftmark} -\DoNotIndex{\list,\llap,\long,\m@ne,\m@th,\mark,\markboth,\markright} -\DoNotIndex{\month,\newcommand,\newcounter,\newenvironment} -\DoNotIndex{\NeedsTeXFormat,\newdimen} -\DoNotIndex{\newlength,\newpage,\nobreak,\noindent,\null,\number} -\DoNotIndex{\numberline,\OldMakeindex,\OnlyDescription,\p@} -\DoNotIndex{\pagestyle,\par,\paragraph,\paragraphmark,\parfillskip} -\DoNotIndex{\penalty,\PrintChanges,\PrintIndex,\ProcessOptions} -\DoNotIndex{\protect,\ProvidesClass,\raggedbottom,\raggedright} -\DoNotIndex{\refstepcounter,\relax,\renewcommand,\reset@font} -\DoNotIndex{\rightmargin,\rightmark,\rightskip,\rlap,\rmfamily,\roman} -\DoNotIndex{\roman,\secdef,\selectfont,\setbox,\setcounter,\setlength} -\DoNotIndex{\settowidth,\sfcode,\skip,\sloppy,\slshape,\space} -\DoNotIndex{\symbol,\the,\trivlist,\typeout,\tw@,\undefined,\uppercase} -\DoNotIndex{\usecounter,\usefont,\usepackage,\vfil,\vfill,\viiipt} -\DoNotIndex{\viipt,\vipt,\vskip,\vspace} -\DoNotIndex{\wd,\xiipt,\year,\z@} -\newcommand{\m}[1]{\mbox{$\langle$\it #1\/$\rangle$}} -\providecommand{\marg}[1]{{\ttfamiliy\char`\{}\m{#1}{\ttfamiliy\char`\}}} -\providecommand{\oarg}[1]{{\ttfamiliy[}\m{#1}{\ttfamiliy]}} -\begin{document} -\DocInput{wijzer.dtx} -\clearpage -\PrintIndex -\end{document} -% -% \fi -% -% \GetFileInfo{wijzer.dtx} -% \title{Document Class \texttt{wijzer}} -% \author{Johannes Braams} -% \date{Version~\fileversion, dated~\filedate} -% \maketitle -% \tableofcontents -% \clearpage -% -% \StopEventually{} ^^A -% -% \section{Introduction} -% -% \section{The {\sc docstrip} modules} -% -% The following modules are used in the implementation to direct -% {\sc docstrip} in generating the external files: -% \begin{center} -% \begin{tabular}{ll} -% class & produce the document class\\ -% type1 & produce the `1' variants of the classes\\ -% type3 & produce the `3' variants of the classes\\ -% driver & produce a documentation driver file \\ -% \end{tabular} -% \end{center} -% -% \section{Initial Code} -% -% In this part we define a few commands that are used later on. -% -% \begin{macro}{\@ptsize} -% This control sequence is used to store the second digit of the -% pointsize we are typesetting in. So, normally, it's value is one -% of 0, 1 or 2. -% \begin{macrocode} -%<*class> -\newcommand\@ptsize{} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\if@restonecol} -% When the document has to printed in two columns, we sometimes -% have to temporarily switch to one column. This switch is used to -% remember to switch back. -% \begin{macrocode} -\newif\if@restonecol -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\if@titlepage} -% A switch to indicate if a titlepage has to be produced. -% \begin{macrocode} -\newif\if@titlepage -\@titlepagetrue -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\if@openright} -% A switch to indicate if chapters must start on a right-hand page. -% The default for the report class is no; for the book class it's -% yes. -% \begin{macrocode} -\newif\if@openright -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\if@openbib} -% A switch to indicate if the bibliography has to be produced in -% the ``open'' format. The default is to use a ``closed'' format. -% \begin{macrocode} -\newif\if@openbib -\@openbibfalse -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\if@oldtoc} -% A switch to indicate if `old' layout of the table of contents -% should be produced. These document classes normally produce a -% table of contents that looks quite different from what the -% standard classes produce. -% \begin{macrocode} -\newif\if@oldtoc -\@oldtocfalse -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\if@allcaps} -% By default the text on the titlepage is set in capital letters. -% This can be disabled by the option \Lopt{mctitle}, which sets the -% switch |\if@allcaps| to false. -% \begin{macrocode} -\newif\if@allcaps -% \end{macro} -% -% \begin{macro}{\if@titlecentered} -% In the document classes \file{wijzer3} the -% default placement of the title that is produced by |\maketitle| -% is flushleft. This can be changed by the switch -% |\if@titlecentered|. -% \begin{macrocode} -%<+type3>\newif\if@titlecentered -%<+type3>\@titlecenteredfalse -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\if@revlabel} -% These document classes need to be able to change the positioning -% of the label in labeled lists. This switch is used for that -% purpose. -% \begin{macrocode} -\newif\if@revlabel -% \end{macrocode} -% \end{macro} -% -% \section{Declaration of Options} -% -% -% \subsection{Setting Paper Sizes} -% -% The variables |\paperwidth| and |\paperheight| should reflect the -% physical paper size after trimming. For desk printer output this -% is usually the real paper size since there is no post-processing. -% Classes for real book production will probably add other paper -% sizes and additionally the production of crop marks for trimming. -% \begin{macrocode} -\DeclareOption{a4paper} - {\setlength\paperheight {297mm}% - \setlength\paperwidth {210mm}} -\DeclareOption{a5paper} - {\setlength\paperheight {210mm}% - \setlength\paperwidth {148mm}} -\DeclareOption{b5paper} - {\setlength\paperheight {250mm}% - \setlength\paperwidth {176mm}} -\DeclareOption{letterpaper} - {\setlength\paperheight {11in}% - \setlength\paperwidth {8.5in}} -\DeclareOption{legalpaper} - {\setlength\paperheight {14in}% - \setlength\paperwidth {8.5in}} -\DeclareOption{executivepaper} - {\setlength\paperheight {10.5in}% - \setlength\paperwidth {7.25in}} -% \end{macrocode} -% -% The option \Lopt{landscape} switches the values of |\paperheight| -% and |\paperwidth|, assuming the dimensions wer given for portrait -% paper. -% \begin{macrocode} -\DeclareOption{landscape} - {\setlength\@tempdima {\paperheight}% - \setlength\paperheight {\paperwidth}% - \setlength\paperwidth {\@tempdima}} -% \end{macrocode} -% -% \subsection{Choosing the type size} -% -% The type size options are handled by defining |\@ptsize| to contain -% the last digit of the size in question and branching on |\ifcase| -% statements. This is done for historical reasons to stay compatible -% with other packages that use the |\@ptsize| variable to select -% special actions. It makes the declarations of size options less -% than 10pt difficult, although one can probably use \texttt{9} -% and \texttt{8} assuming that a class won't define both -% \Lopt{8pt} and \Lopt{18pt} options. -% -% \begin{macrocode} -\DeclareOption{10pt}{\renewcommand\@ptsize{0}} -\DeclareOption{11pt}{\renewcommand\@ptsize{1}} -\DeclareOption{12pt}{\renewcommand\@ptsize{2}} -% \end{macrocode} -% -% -% \subsection{Two-side or one-side printing} -% -% For two-sided printing we use the switch |\if@twoside|. In -% addition we have to set the |\if@mparswitch| to get any margin -% paragraphs into the outside margin. -% \begin{macrocode} -\DeclareOption{oneside}{\@twosidefalse \@mparswitchfalse} -\DeclareOption{twoside}{\@twosidetrue \@mparswitchtrue} -% \end{macrocode} -% -% -% \subsection{Draft option} -% -% If the user requests \Lopt{draft} we show any overfull boxes. -% We could probably add some more interesting stuff to this option. -% \begin{macrocode} -\DeclareOption{draft}{\setlength\overfullrule{5pt}} -\DeclareOption{final}{\setlength\overfullrule{0pt}} -% \end{macrocode} -% -% \subsection{Titlepage option} -% An article usually has no separate titlepage, but the user can -% request one. -% \begin{macrocode} -\DeclareOption{titlepage}{\@titlepagetrue} -\DeclareOption{notitlepage}{\@titlepagefalse} -% \end{macrocode} -% -% \subsection{openright option} -% This option determines whether or not a chapter must start on -% a right-hand page -% request one. -% \begin{macrocode} -\DeclareOption{openright}{\@openrighttrue} -\DeclareOption{openany}{\@openrightfalse} -% \end{macrocode} -% -% For these document classes there used to be a file -% \file{voorwerk.sty} which was a replacement for -% \file{titlepag.sty}. Therefore we also have the option -% \Lopt{voorwerk}. -% \begin{macrocode} -\DeclareOption{voorwerk}{\@titlepagetrue} -\DeclareOption{geenvoorwerk}{\@titlepagefalse} -% \end{macrocode} -% -% -% \subsection{Table of contents formatting} -% -% This document class uses a new layout for the table of contents, -% but in order to maintain compatibility with the standard \LaTeXe -% document classes we supply an extra option: \Lopt{oldtoc}. If -% this option is specified the switch |\if@oldtoc| will be set -% true. -% \begin{macrocode} -\DeclareOption{oldtoc}{\@oldtoctrue} -% \end{macrocode} -% -% \subsection{Formatting of the title} -% -% The option \Lopt{titlecentered} changes the behaviour of the -% |\maketitle| command. It then produces a title like it does for -% the \file{artikel1} document class. -% \begin{macrocode} -%<+type3>\DeclareOption{titlecentered}{\@titlecenteredtrue} -% \end{macrocode} -% -% In this document class the titlepage uses all capital -% letters. The option \Lopt{mctitle} (for `mixed case') prevents -% this. -% \begin{macrocode} -\DeclareOption{mctitle}{\@allcapsfalse} -\DeclareOption{uctitle}{\@allcapstrue} -% \end{macrocode} -% -% \subsection{Twocolumn printing} -% -% Two-column and one-column printing is again realized via a switch. -% \begin{macrocode} -\DeclareOption{onecolumn}{\@twocolumnfalse} -\DeclareOption{twocolumn}{\@twocolumntrue} -% \end{macrocode} -% -% \subsection{Equation numbering on the left} -% -% The option \Lopt{leqno} can be used to get the equation numbers -% on the left side of the equation. -% \begin{macrocode} -\DeclareOption{leqno}{\input{leqno.clo}} -% \end{macrocode} -% -% \subsection{Flush left displays} -% -% The option \Lopt{fleqn} redefines the displayed math environmens -% in such a way that they come out flush left, with an indentation -% of |\mathindent| from the prevailing left margin. -% \begin{macrocode} -\DeclareOption{fleqn}{\input{fleqn.clo}} -% \end{macrocode} -% -% \subsection{Open bibliography} -% -% The option \Lopt{openbib} produces the ``open'' bibliography -% style, in which each block starts on a new line, and succeeding -% lines in a block are indented by |\bibindent|. -% \begin{macrocode} -\DeclareOption{openbib}{\@openbibtrue} -% \end{macrocode} -% -% -% \section{Executing Options} -% -% Here we execute the default options to initialize certain -% variables. -% \begin{macrocode} -\ExecuteOptions{a4paper,10pt,oneside,onecolumn,final,uctitle,openany} -% \end{macrocode} -% -% The |\ProcessOptions| command causes the execution of the code -% for every option \Lopt{FOO} -% which is declared and for which the user typed -% the \Lopt{FOO} option in his -% |\documentclass| command. For every option \Lopt{BAR} he typed, -% which is not declared, the option is assumed to be a global option. -% All options will be passed as document options to any -% |\usepackage| command in the document preamble. -% \begin{macrocode} -\ProcessOptions -% \end{macrocode} -% Now that all the options have been executed we can load the -% chosen class option file that contains all size dependent code. -% \begin{macrocode} -\input{ntg1\@ptsize.clo} -% \end{macrocode} -% -% \section{Loading Packages} -% -% These class files do not load additional packages. -% -% -% \section{Document Layout} -% \label{sec:maincode} -% -% In this section we are finally dealing with the nasty typographical -% details. -% -% \subsection{Paragraphing} -% -% \begin{macro}{\lineskip} -% \begin{macro}{\normallineskip} -% These parameters control \TeX's behaviour when two lines tend to -% come too close together. -% \begin{macrocode} -\setlength\lineskip{1\p@} -\setlength\normallineskip{1\p@} -% \end{macrocode} -% \end{macro} -% \end{macro} -% -% \begin{macro}{\baselinestretch} -% This is used as a multiplier for |\baselineskip|. The default is -% to {\em not\/} stretch the baselines. -% \begin{macrocode} -\renewcommand\baselinestretch{} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\unitindent} -% These document classes all use a single dimension for a number of -% layout parameters: -% \begin{itemize} -% \item the label width in section heading, -% \item the |\parindent| -% \item the footnote label indent (= half |\unitindent|) -% \item listindent on the first level -% \end{itemize} -% \begin{macrocode} -\newdimen\unitindent -% \end{macrocode} -% The default setting accomodates three levels of single digit -% section numbering. -% \begin{macrocode} -{\setbox0\hbox{\normalsize\rmfamily 2.2.2\hskip.5em} - \global\unitindent=\wd0} -% \end{macrocode} -% -% \begin{macro}{\othermargin} -% Other indentations are maximal label width plus white space. -% \begin{macrocode} -\newdimen\othermargin -{\setbox0\hbox{\normalsize (m)\hskip.6em}\global\othermargin=\wd0} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{if@needwriteindent} -% If this is not enough, a new width is calculated, set, and the -% file{.aux} file contains an instruction that will set -% |\unitindent| on the next run. -% -% For this we need a switch -% \begin{macrocode} -\newif\if@needwriteindent -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\@indentset} -% And a command that sets the various parameters. -% \begin{macrocode} -\newcommand\@indentset{% -%<-type3> \global\parindent=\unitindent - \global\leftmargini=\unitindent - \global\@needwriteindenttrue} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\@writeindent} -% The |\end{document}| command will call |\@writeindent| to write -% the final width of |\unitindent| on the \file{.aux} file. Also a -% command is written to set |\unitindent|. To be compatible with -% other document classes a check is written to the \file{.aux} file -% for the existence of |\unitindent|. This prevents nasty errors -% when another document class is used. -% \begin{macrocode} -\newcommand\@writeindent[1]{\immediate\write\@mainaux - {\string\@ifundefined{unitindent}{\string\newdimen\string\unitindent - \let\string\@indentset\relax}{}} - \immediate\write\@mainaux{\global\string\unitindent=#1\string\relax - \string\@indentset \string\relax}} -% \end{macrocode} -% \end{macro} -% -% We need to use the hook into |\end{document}| to write the final -% value of |\unitindent| om the file{.aux} file for the next run. -% \begin{macrocode} -\AtEndDocument{% - \if@filesw - \if@needwriteindent - \@writeindent{\the\unitindent} - \fi - \fi} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\parskip} -% \begin{macro}{\parindent} -% |\parskip| gives extra vertical space between paragraphs and -% |\parindent| is the width of the paragraph indentation. The value -% of |\parindent| depends on whether we are in two column mode. -% \begin{macrocode} -%<*type1> -\setlength\parskip{0\p@} -\setlength\parindent{\unitindent} -% -%<*type3> -\setlength\parskip{.5\baselineskip \@plus .1\baselineskip - \@minus .1\baselineskip} -\setlength\parindent{\z@} -% -% \end{macrocode} -% \end{macro} -% \end{macro} -% -% \begin{macro}{\@lowpenalty} -% \begin{macro}{\@medpenalty} -% \begin{macro}{\@highpenalty}% -% The commands |\nopagebreak| and |\nolinebreak| put in penalties -% to discourage these breaks at the point they are put in. -% They use |\@lowpenalty|, |\@medpenalty| or |\@highpenalty|, -% dependent on their argument. -% \begin{macrocode} -\@lowpenalty 51 -\@medpenalty 151 -\@highpenalty 301 -% \end{macrocode} -% \end{macro} -% \end{macro} -% \end{macro} -% -% \begin{macro}{\clubpenalty} -% \begin{macro}{\widowpenalty} -% These penalties are use to discourrage club and widow lines. -% Because we use their default values we only show them here, -% commented out. -% \begin{macrocode} -% \clubpenalty 150 -% \widowpenalty 150 -% \end{macrocode} -% \end{macro} -% \end{macro} -% -% \begin{macro}{\displaywidowpenalty} -% \begin{macro}{\predisplaypenalty} -% \begin{macro}{\postdisplaypenalty} -% Discourrage (but not so much) widows in front of a math display -% and forbid breaking directly in front of a display. Allow break -% after a display without a penalty. Again the default values are -% used, therefore we only show them here. -% \begin{macrocode} -% \displaywidowpenalty 50 -% \predisplaypenalty 10000 -% \postdisplaypenalty 0 -% \end{macrocode} -% \end{macro} -% \end{macro} -% \end{macro} -% -% \begin{macro}{\interlinepenalty} -% Allow the breaking of a page in the middle of a paragraph. -% \begin{macrocode} -% \interlinepenalty 0 -% \end{macrocode} -% \end{macro} -% -% -% \begin{macro}{\brokenpenalty} -% We allow the breaking of a page after a hyphenated line. -% \begin{macrocode} -% \brokenpenalty 0 -% \end{macrocode} -% \end{macro} -% -% \subsubsection{Float placement parameters} -% -% All float parameters are given default values in the \LaTeXe{} -% kernel. For this reason counters only need to be set with -% |\setcounter| and other parameters are set using |\renewcommand|. -% -% \paragraph{Limits for the placement of floating objects} -% -% \begin{macro}{\c@topnumber} -% The \Lcount{topnumber} counter holds the maximum number of -% floats that can appear on the top of a text page. -% \begin{macrocode} -\setcounter{topnumber}{2} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\topfraction} -% This indicates the maximum part of a text page that can be -% occupied by floats at the top. -% \begin{macrocode} -\renewcommand\topfraction{.7} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\c@bottomnumber} -% The \Lcount{bottomnumber} counter holds the maximum number of -% floats that can appear on the bottom of a text page. -% \begin{macrocode} -\setcounter{bottomnumber}{1} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\bottomfraction} -% This indicates the maximum part of a text page that can be -% occupied by floats at the bottom. -% \begin{macrocode} -\renewcommand\bottomfraction{.3} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\c@totalnumber} -% This indicates the maximum number of floats that can appear on -% any text page. -% \begin{macrocode} -\setcounter{totalnumber}{3} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\textfraction} -% This indicates the minimum part of a text page that has to be -% occupied by text. -% \begin{macrocode} -\renewcommand\textfraction{.2} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\floatpagefraction} -% This indicates the minimum part of a page that has to be -% occupied by floating objects before a `float page' is produced. -% \begin{macrocode} -\renewcommand\floatpagefraction{.5} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\c@dbltopnumber} -% The \Lcount{dbltopnumber} counter holds the maximum number of -% two column floats that can appear on the top of a two column text -% page. -% \begin{macrocode} -\setcounter{dbltopnumber}{2} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\dbltopfraction} -% This indicates the maximum part of a two column text page that -% can be occupied by two column floats at the top. -% \begin{macrocode} -\renewcommand\dbltopfraction{.7} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\dblfloatpagefraction} -% This indicates the minimum part of a page that has to be -% occupied by two column wide floating objects before a `float -% page' is produced. -% \begin{macrocode} -\renewcommand\dblfloatpagefraction{.5} -% \end{macrocode} -% \end{macro} -% -% \subsection{Page Styles} -% -% The page style \pstyle{foo} is defined by defining the command -% |\ps@foo|. This command should make only local definitions. -% There should be no stray spaces in the definition, since they -% could lead to mysterious extra spaces in the output (well, that's -% something that should be always avoided). -% -% \begin{macro}{\@evenhead} -% \begin{macro}{\@oddhead} -% \begin{macro}{\@evenfoot} -% \begin{macro}{\@oddfoot} -% The |\ps@...| command defines the macros |\@oddhead|, -% |\@oddfoot|, |\@evenhead|, and |\@evenfoot| to define the running -% heads and feet---e.g., |\@oddhead| is the macro to produce the -% contents of the heading box for odd-numbered pages. It is called -% inside an |\hbox| of width |\textwidth|. -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% -% \begin{macro}{\thispagestyle} -% Several commands (|\index|, |\maketitle|) give a -% |\thispagestyle{plain}| command, which will overrule a -% |\pagestyle{empty}| command. This situation is almost always -% unwanted. Therefore we provide a more careful definition. -% -% First save the original definition. -% \begin{macrocode} -\let\Thispagestyle\thispagestyle -% \end{macrocode} -% Then we provide the new definition, for which we must also adapt -% |\pagestyle| a little. -% \begin{macrocode} -\newcommand\@emptypagestyle{empty} -\renewcommand\pagestyle[1]{\@nameuse{ps@#1}\def\@currentpagestyle{#1}} -\renewcommand\thispagestyle[1]{% - \ifx\@currentpagestyle\@emptypagestyle - \else - \global\@specialpagetrue - \gdef\@specialstyle{#1}% - \fi} -% \end{macrocode} -% \end{macro} -% -% \subsubsection{Marking conventions} -% -% To make headings determined by the sectioning commands, the page -% style defines the commands |\chaptermark|, |\sectionmark|, -% \ldots,\\ -% where |\chaptermark{|\meta{TEXT}|}| is called by -% |\chapter| to set a mark, and so on. -% -% The |\...mark| commands and the |\...head| macros are defined -% with the help of the following macros. (All the |\...mark| -% commands should be initialized to no-ops.) -% -% \LaTeX{} extends \TeX's |\mark| facility by producing two kinds -% of marks, a `left' and a `right' mark, using the following -% commands: -% \begin{flushleft} -% |\markboth{|\meta{LEFT}|}{|\meta{RIGHT}|}|: Adds both marks. -% -% |\markright{|\meta{RIGHT}|}|: Adds a `right' mark. -% -% |\leftmark|: Used in the |\@oddhead|, |\@oddfoot|, |\@evenhead| -% or |\@evenfoot| macros, it gets the current `left' -% mark. |\leftmark| works like \TeX's |\botmark| -% command. -% -% |\rightmark|: Used in the |\@oddhead|, |\@oddfoot|, |\@evenhead| -% or |\@evenfoot| macros, it gets the current -% `right' mark. |\rightmark| works like \TeX's -% |\firstmark| command. -% \end{flushleft} -% -% The marking commands work reasonably well for right marks -% `numbered within' left marks--e.g., the left mark is changed by a -% |\chapter| command and the right mark is changed by a |\section| -% command. However, it does produce somewhat anomalous results if -% two |\markboth|'s occur on the same page. -% -% -% Commands like |\tableofcontents| that should set the marks in some -% page styles use a |\@mkboth| command, which is |\let| by the -% pagestyle command (|\ps@...|) to |\markboth| for setting the -% heading or to |\@gobbletwo| to do nothing. -% -% -% \begin{macrocode} -% %%%\mark{{}{}} % Initializes TeX's marks <--- can vanish -% \end{macrocode} -% -% \subsubsection{Defining the page styles} -% \label{sec:pagestyle} -% -% The pagestyle \pstyle{empty} is defined in \file{latex.dtx}, but -% the pagestyle \pstyle{plain} is slightly altered here. The -% difference is that the page numbers are set flush right in -% onesided and flush left and right in the twosided style. -% -% \begin{macro}{\ps@plain} -% -% \begin{macrocode} -\renewcommand\ps@plain{% -% \end{macrocode} -% The running head are empty in this pagestyle, the page number -% appears in the running foot. -% \begin{macrocode} - \let\@oddhead\@empty\let\@evenhead\@empty - \def\@oddfoot{\hfil\PageFont\thepage}% - \if@twoside - \def\@evenfoot{\PageFont\thepage\hfil}% - \else - \let\@evenfoot\@oddfoot - \fi -% \end{macrocode} -% Because the running heads should be empty we |let| |\@mkboth| to -% |\@gobbletwo|, thus disabling the mark commands. -% \begin{macrocode} - \let\@mkboth\@gobbletwo} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\ps@headings} -% The definition of the page style \pstyle{headings} has to be -% different for two sided printing than it is for one sided -% printing. -% -% \begin{macrocode} -\if@twoside - \def\ps@headings{% -% \end{macrocode} -% The running feet are empty in this page style, the running head -% contains the page number and one of the marks. -% \begin{macrocode} - \let\@oddfoot\@empty\let\@evenfoot\@empty - \def\@evenhead{{\PageFont\thepage}\hfil\MarkFont\leftmark}% - \def\@oddhead{{\MarkFont\rightmark}\hfil\PageFont\thepage}% -% \end{macrocode} -% -% When using this page style, the contents of the running head is -% determined by the chapter and section titles. So we |\let| -% |\@mkboth| to |\markboth|. -% \begin{macrocode} - \let\@mkboth\markboth -% \end{macrocode} -% -% In thisdocument class we use the |\chaptermark| -% and |\sectionmark| macros to fill the running heads. -% -% Note the use of |##1| for the parameter of the |\chaptermark| -% command, which will be defined when |\ps@headings| is executed. -% -% \begin{macrocode} - \def\chaptermark##1{% - \markboth {\uppercase{\ifnum \c@secnumdepth >\m@ne - \@chapapp\ \thechapter. \ \fi - ##1}}{}}% - \def\sectionmark##1{% - \markright {\uppercase{\ifnum \c@secnumdepth >\z@ - \thesection. \ \fi - ##1}}}} -% \end{macrocode} -% -% The definition of |\ps@headings| for one sided printing can be -% much simpler, because we treat even and odd pages the same. -% Therefore we don't need to define |\@even...|. -% \begin{macrocode} -\else - \def\ps@headings{% - \let\@oddfoot\@empty - \def\@oddhead{{\MarkFont\rightmark}\hfil\PageFont\thepage}% - \let\@mkboth\markboth -% \end{macrocode} -% We use |\markright| now instead of |\markboth| as we did for two -% sided printing. -% \begin{macrocode} - \def\chaptermark##1{% - \markright {\uppercase{\ifnum \c@secnumdepth >\m@ne - \@chapapp\ \thechapter. \ \fi - ##1}}}} -\fi -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\ps@myheadings} -% The definition of the page style \pstyle{myheadings} is fairly -% simple because the user determines the contents of the running -% head himself by using the |\markboth| and |\markright| commands. -% -% \begin{macrocode} -\def\ps@myheadings{% - \let\@oddfoot\@empty\let\@evenfoot\@empty - \def\@evenhead{{\PageFont\thepage}\hfil\MarkFont\leftmark}% - \def\@oddhead{{\MarkFont\rightmark}\hfil\PageFont\thepage}% -% \end{macrocode} -% -% We have to make sure that the marking commands that are used by -% the chapter and section headings are disabled. We do this -% |\let|ting them to a macro that gobbles its argument(s). -% \begin{macrocode} - \let\@mkboth\@gobbletwo - \let\chaptermark\@gobble - \let\sectionmark\@gobble - } -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\PageFont} -% \begin{macro}{\MarkFont} -% These macros are use to store the fonts that are used to typeset -% the pagenumber (|\PageFont|) and the marks (|\MarkFont|) in the -% running head and feet. -% \begin{macrocode} -\newcommand\PageFont{\rmfamily} -\newcommand\MarkFont{\slshape} -% \end{macrocode} -% \end{macro} -% \end{macro} -% -% \begin{macro}{\RunningFonts} -% Use this macro to change the fonts that are used in the running -% heads. -% \begin{macrocode} -\newcommand\RunningFonts[2]{% - \renewcommand\PageFont{#1}\renewcommand\MarkFont{#2}} -% \end{macrocode} -% \end{macro} -% -% \section{Document Markup} -% -% \subsection{The title} -% -% \begin{macro}{\title} -% \begin{macro}{\author} -% \begin{macro}{\date} -% These three macros are provided by \file{latex.dtx} to provide -% information about the title, author(s) and date of the document. -% The information is stored away in internal control sequences. -% It is the task of the |\maketitle| command to use the -% information provided. The definitions of these macros are shown -% here for information. -% \begin{macrocode} -% \newcommand\title[1]{\gdef\@title{#1}} -% \newcommand\author[1]{\gdef\@author{#1}} -% \newcommand\date[1]{\gdef\@date{#1}} -% \end{macrocode} -% The |\date| macro gets today's date by default. -% \begin{macrocode} -% \gdef\@date{\today} -% \end{macrocode} -% \end{macro} -% \end{macro} -% \end{macro} -% -% \begin{macro}{\TitleFont} -% This selects the font to use in the title of the document. -% \begin{macrocode} -\newcommand\TitleFont{\bfseries} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\maketitle} -% The definition of |\maketitle| depends on whether a seperate -% title page is made. This is the default for this document class. -% Note that the title, author and date information is printed in -% capital letters by default. This can be changed by the option -% \Lopt{mctitle}. -% -% When we are making a title page, we locally redefine -% |\footnotesize| and |\footnoterule| to change the appearance of -% the footnotes that are produced by the |\thanks| command. -% \begin{macrocode} -\renewcommand\TitleFont{\rmfamily} -\newcommand\maketitle{% - \begin{titlepage}% - \let\footnotesize\small - \let\footnoterule\relax -% \end{macrocode} -% Footnotes on the titlepage, generated by the use of |\thanks|, -% use symbols in these document classes. -% \begin{macrocode} - \long\def\@makefntext##1{\parindent\z@ - \def\labelitemi{--}\@revlabeltrue - \leavevmode$\m@th^{\@thefnmark}$\kern1em\relax ##1} - \renewcommand\thefootnote{\fnsymbol{footnote}}% -% \end{macrocode} -% We center the entire title vertically; the centering is set off a -% little by adding a |\vskip|. In compatibility mode the pagenumber -% is set to 0 to keep the behaviour of \LaTeX\ 2.09 style files -% \begin{macrocode} - \if@compatibility\setcounter{page}{0}\fi - \null\vfil - \vskip 60\p@ -% \end{macrocode} -% Then we set the title, in a |\LARGE| font; leave a little space -% and set the author(s) in a |\large| font. We do this inside a -% tabular environment to get them in a single column. -% Before the date we leave a little whitespace again. -% \begin{macrocode} - \begin{center}% - \TitleFont - {\LARGE \def\\{\penalty -\@M} - \if@allcaps - \expandafter\uc@nothanks\@title\thanks\relax - \else - \@title - \fi\par}% - \vskip 3em% - {\large - \lineskip .75em \parindent\z@ - \begin{tabular}[t]{c}% - \if@allcaps - \expandafter\uc@authornothanks\@author\and\relax - \else - \@author - \fi - \end{tabular}\par}% - \vskip 1.5em% - {\large - \if@allcaps - \uppercase\expandafter{\@date}% - \else - \@date - \fi\par}% - \end{center}\par -% \end{macrocode} -% Then we call |\@thanks| to print the information that goes into -% the footnote and finish the page. -% \begin{macrocode} - \@thanks - \vfil\null - \end{titlepage}% -% \end{macrocode} -% We reset the \Lcount{footnote} counter, disable |\thanks| and -% |\maketitle| and save some storage space by emptying the internal -% information macros. -% \begin{macrocode} - \setcounter{footnote}{0}% - \let\thanks\relax\let\maketitle\relax - \gdef\@thanks{}\gdef\@author{}\gdef\@title{}} -% \end{macrocode} -% -% We want to have the title, author and date information in -% uppercase, but we have to be very carefull not to put too much -% text in uppercase. The macros that perform the filtering of texts -% that shouldn't be in uppercase were developped with th help of -% Howard Trickey. -% -% \begin{macro}{\uc@nothanks} -% This macro takes all the text up to the first use of |\thanks| -% and passes it to |\uppercase|. The use of |\futurelet| will store -% the token \emph{after} the |\thanks| in |\@tempa|. The macro -% |\u@tx| uses that information to determine what to do next. -% \begin{macrocode} -\def\uc@nothanks#1\thanks{\uppercase{#1}\futurelet\@tempa\uc@tx} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\uc@authornothanks} -% A document can have more than one author. Usually they are -% seperated with |\and|. For each author a footnote --using -% |\thanks| can be present. Therefore this macro takes all the text -% up to the first use of |\and|, thus picking up all the -% information for one author. This is than passsed to -% |\uc@nothanks|, which checks for the presence of |\thanks|. For -% this to work the argument of |\uc@nothanks| has to be delimited -% by |\thanks\relax|. -% \begin{macrocode} -\def\uc@authornothanks#1\and{\uc@nothanks#1\thanks\relax -% \end{macrocode} -% Then we have to check whether the |\and| we ound earlier was put -% in by the user, in which case information for another user will -% follow, or by the call from another macro, in which case the -% |\and| will be followed by a |\relax| token. The |\futurelet| -% contstruct stores the first token \emph{after} the |\and| in -% |\@tempa| to be inspected by |\u@ax|. -% \begin{macrocode} - \futurelet\@tempa\uc@ax} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\uc@ax} -% When |\@tempa| contains a |\relax| token nothing needs to be -% done, when it doesn't we put in a linebreak |\\| the word `and' -% (stored in |\andname| so that this control sequence can be -% redeined for other languages), another linebreak and we call -% |\uc@authornothanks| to continue processing. The |\expandafter| -% lets \TeX\ see the |\fi| first. -% \begin{macrocode} -\def\uc@ax{% - \ifx\@tempa\relax - \else - \\ \andname \\ \expandafter\uc@authornothanks - \fi} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\uc@tx} -% This macro simply checks whether |\@tempa| contains a |\relax| -% token. When it doesn't further processing is performed by -% |\u@ty|. -% \begin{macrocode} -\def\uc@tx{\ifx\@tempa\relax - \else \expandafter\uc@ty \fi} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\uc@ty} -% The macro |\uc@ty| gets executed when the |\thanks| that -% delimited text earlier on in the processing had a real argument. -% In that case it was a |\thanks| put in by the user, \emph{not} by -% these macros. Therefore the argument is now passed to |\thanks| -% and processing continues by calling |\uc@nothanks|. -% \begin{macrocode} -\def\uc@ty#1{\thanks{#1}\uc@nothanks} -% \end{macrocode} -% \end{macro} -% -% When the title is not on a page of its own, the layout of the -% title is a little different. We use symbols to mark the footnotes -% and we have to deal with two column documents. -% -% Therefore we first start a new group to keep changes local. Then -% we redefine |\thefootnote| to use |\fnsymbol|; and change -% |\@makefnmark| so that footnotemarks have zero width (to make the -% centering of the author names look better). We also want raised -% footnotemarkers in the footnotes here. -% \begin{macrocode} -\else -\newcommand\maketitle{\par - \begingroup - \renewcommand\thefootnote{\fnsymbol{footnote}}% - \def\@makefnmark{\hbox to\z@{$\m@th^{\@thefnmark}$\hss}}% - \def\@makefntext{\@xmakefntext{$\m@th^{\@thefnmark}$}}% -% \end{macrocode} -% If this is a twocolumn document we start a new page in twocolumn -% mode, with the title set to the full width of the text. The -% actual printing of the title information is left to -% |\@maketitle|. -% \begin{macrocode} - \if@twocolumn - \ifnum \col@number=\@ne - \@maketitle - \else - \twocolumn[\@maketitle]% - \fi - \else -% \end{macrocode} -% When this is not a twocolumn document we just start a new page, -% prevent floating objects from appearing on the top of this page -% and print the title information. -% \begin{macrocode} - \newpage - \global\@topnum\z@ - \@maketitle - \fi -% \end{macrocode} -% This page gets a \pstyle{plain} layout. We call |\@thanks| to -% produce the footnotes. -% \begin{macrocode} - \thispagestyle{plain}\@thanks -% \end{macrocode} -% Now we can close the group, reset the \Lcount{footnote} counter, -% disable |\thanks|, |\maketitle| and |\@maketitle| and save some -% storage space by emptying the internal information macros. -% \begin{macrocode} - \endgroup - \setcounter{footnote}{0}% - \let\thanks\relax - \let\maketitle\relax\let\@maketitle\relax - \gdef\@thanks{}\gdef\@author{}\gdef\@title{}} -% \end{macrocode} -% -% \begin{macro}{\@maketitle} -% This macro takes care of formatting the title information when we -% have no seperate title page. -% -% We always start a new page, leave some white space and center the -% information. The title is set in a |\LARGE| font, the author -% names and the in a |\large| font. -% \begin{macrocode} -\def\@maketitle{% - \newpage - \null - \vskip 2em% -%<+type3>\if@titlecentered - \begin{center}% - {\LARGE \TitleFont \@title \par}% - \vskip 1.5em% - {\large \TitleFont - \lineskip .5em% - \begin{tabular}[t]{c}% - \@author - \end{tabular}\par}% - \vskip 1em% - {\large \TitleFont \@date}% - \end{center}% -%<*type3> - \else - {\LARGE \TitleFont \head@style \@title \par} \vskip 1.5em - {\large \TitleFont \lineskip .5em \tabcolsep\z@ - \def\and{%%% \begin{tabular} has already started - \end{tabular}\hskip 1em plus .17fil - \begin{tabular}[t]{l}}%% \end{tabular} will come - \begin{tabular}[t]{l}\@author\end{tabular}\par} - \vskip 1em {\large \TitleFont \@date} - \fi -% - \par - \vskip 1.5em} -\fi -% \end{macrocode} -% \end{macro} -% \end{macro} -% -% \subsection{Chapters and Sections} -% -% \subsubsection{Building blocks} -% The definitions in this part of the class file make use of two -% macros, |\@startsection| and |\secdef|, which are defined by -% \file{latex.dtx}. To understand what is going on here, we -% describe their syntax. -% -% The macro |\@startsection| has 6 required arguments, optionally -% followed by a $*$, an optional argument and a required argument: -% -% |\@startsection|\meta{name}\meta{level}\meta{indent}^^A -% \meta{beforeskip}\meta{afterskip}\meta{style} -% optional *\\ -% \null\hphantom{\bslash @startsection}^^A -% |[|\meta{altheading}|]|\meta{heading} -% -% It is a generic command to start a section, the arguments have -% the following meaning: -% -% \begin{description} -% \item[\meta{name}] The name of the user level command, e.g., -% `section'. -% \item[\meta{level}] A number, denoting the depth of the section -% -- e.g., chapter=1, section = 2, etc. A section number -% will be printed if and only if \meta{level} $<=$ the value -% of the \Lcount{secnumdepth} counter. -% \item[\meta{indent}] The indentation of the heading from the left -% margin -% \item[\meta{beforeskip}] The absolute value of this argument -% gives the skip to leave above the heading. If it is -% negative, then the paragraph indent of the text following -% the heading is suppressed. -% \item[\meta{afterskip}] If positive, this gives the skip to leave -% below the heading, else it gives the skip to leave to the -% right of a run-in heading. -% \item[\meta{style}] Commands to set the style of the heading. -% \item[$*$] When this is missing the heading is numbered and the -% corresponding counter is incremented. -% \item[\meta{altheading}] Gives an alternative heading to use in -% the table of contents and in the running heads. This should -% be present when the $*$ form is used. -% \item[\meta{heading}] The heading of the new section. -% \end{description} -% A sectioning command is normally defined to |\@startsection| and -% its first six arguments. -% -% The macro |\secdef| can be used when a sectioning command is -% defined without using |\@startsection|. It has two arguments: -% -% |\secdef|\meta{unstarcmds}\meta{starcmds} -% -% \begin{description} -% \item[\meta{unstarcmds}] Used for the normal form of the -% sectioning command. -% \item[\meta{starcmds}] Used for the $*$-form of the -% sectioning command. -% \end{description} -% -% You can use |\secdef| as follows: -% \begin{verbatim} -% \def\chapter { ... \secdef \CMDA \CMDB } -% \def\CMDA [#1]#2{ ... } % Command to define -% % \chapter[...]{...} -% \def\CMDB #1{ ... } % Command to define -% % \chapter*{...} -% \end{verbatim} -% -% \begin{macro}{\head@style} -% In the definition of chapter and section commands a number of -% settings frequently occur. Therefore we store them in a control -% sequence. -% -% Section headings are to be set extremely raggedright, with no -% hyphenations, not even at explicit hyphens. -% -% \begin{macrocode} -\newcommand\head@style{% - \interlinepenalty \@M - \hyphenpenalty=\@M \exhyphenpenalty=\@M - \rightskip=0cm plus .7\hsize\relax} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\@sect} -% The definition of this macro from \file{latex.dtx} needs to be -% repeated here because we want to modify its behaviour with -% respect to: -% \begin{enumerate} -% \item the width of the number, which is fixed; -% \item checking the value of |\unitindent|; -% \item formatting the section title ragged right; -% \item changing the argument of |\contentsline|. -% \end{enumerate} -% \begin{macrocode} -\def\@sect#1#2#3#4#5#6[#7]#8{\ifnum #2>\c@secnumdepth - \let\@svsec\@empty\else - \refstepcounter{#1}% -% \end{macrocode} -% The following code (within the group) checks the value of -% |\unitindent|. If the sectionnumber is wider than |\unitindent| -% its value is adapted and a flag is set to rememeber to store the -% new value in the \file{.aux}-file. -% \begin{macrocode} - \begingroup - \setbox\@tempboxa=\hbox{#6\relax - \csname the#1\endcsname - \hskip.5em} - \ifdim\wd\@tempboxa>\unitindent - \global\unitindent=\wd\@tempboxa - \@indentset - \fi - \endgroup - \let\@@protect\protect - \def\protect{\noexpand\protect\noexpand}% - \edef\@svsec{\@seccntformat{#1}}% - \let\protect\@@protect\fi - \@tempskipa #5\relax - \ifdim \@tempskipa>\z@ - \begingroup #6\relax - \@hangfrom{\hskip #3\relax\@svsec}{\head@style #8\par}% - \endgroup - \csname #1mark\endcsname{#7}% - \addcontentsline{toc}{#1}{% - \ifnum #2>\c@secnumdepth - \else - \protect\numberline{\csname the#1\endcsname}% - \fi - \toc@font#2 #7}% - \else - \def\@svsechd{#6\hskip #3\relax - \@svsec #8\csname #1mark\endcsname{#7}% - \addcontentsline{toc}{#1}{% - \ifnum #2>\c@secnumdepth - \else - \protect\numberline{\csname the#1\endcsname}% - \fi - \toc@font#2 #7}}% - \fi - \@xsect{#5}} -% \end{macrocode} -% This macro was introduced in \LaTeXe, its definition is changed -% here to get the fixed with of the section number. -% \begin{macrocode} -\def\@seccntformat#1{% - \hbox to \unitindent{\csname the#1\endcsname \hfil}% - } -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\@ssect} -% Similar changes need to be made to the definition of |\@ssect|, -% which is used in `starred' sections. -% \begin{macrocode} -\def\@ssect#1#2#3#4#5{\@tempskipa #3\relax - \ifdim \@tempskipa>\z@ - \begingroup #4\relax - \@hangfrom{\hskip #1}{\head@style #5\par}\endgroup - \else \def\@svsechd{#4\hskip #1\relax #5}\fi - \@xsect{#3}} -% \end{macrocode} -% \end{macro} -% -% \subsubsection{Mark commands} -% -% \begin{macro}{\chaptermark} -% \begin{macro}{\sectionmark} -% \begin{macro}{\subsectionmark} -% \begin{macro}{\subsubsectionmark} -% \begin{macro}{\paragraphmark} -% \begin{macro}{\subparagraphmark} -% Default initializations of |\...mark| commands. These commands -% are used in the definition of the page styles (see -% section~\ref{sec:pagestyle}) Most of them are already defined by -% \file{latex.ltx}, so they are only shown here. -% -% \begin{macrocode} -\newcommand\chaptermark[1]{} -% \newcommand\sectionmark[1]{} -% \newcommand\subsectionmark[1]{} -% \newcommand\subsubsectionmark[1]{} -% \newcommand\paragraphmark[1]{} -% \newcommand\subparagraphmark[1]{} -% \end{macrocode} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% -% \subsubsection{Define Counters} -% -% \begin{macro}{\c@secnumdepth} -% The value of the counter \Lcount{secnumdepth} gives the depth of -% the highest-level sectioning command that is to produce section -% numbers. -% \begin{macrocode} -\setcounter{secnumdepth}{2} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\c@part} -% \begin{macro}{\c@chapter} -% \begin{macro}{\c@section} -% \begin{macro}{\c@subsection} -% \begin{macro}{\c@subsubsection} -% \begin{macro}{\c@paragraph} -% \begin{macro}{\c@subparagraph} -% These counters are used for the section numbers. The macro\\ -% |\newcounter{|\meta{newctr}|}[|\meta{oldctr}|]|\\ -% defines \meta{newctr} to be a counter, which is reset to zero when -% counter \meta{oldctr} is stepped. Counter \meta{oldctr} must -% already be defined. -% -% \begin{macrocode} -\newcounter {part} -\newcounter {chapter} -\newcounter {section}[chapter] -\newcounter {subsection}[section] -\newcounter {subsubsection}[subsection] -\newcounter {paragraph}[subsubsection] -\newcounter {subparagraph}[paragraph] -% \end{macrocode} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% -% \begin{macro}{\thepart} -% \begin{macro}{\thechapter} -% \begin{macro}{\thesection} -% \begin{macro}{\thesubsection} -% \begin{macro}{\thesubsubsection} -% \begin{macro}{\theparagraph} -% \begin{macro}{\thesubparagraph} -% For any counter \Lcount{CTR}, |\theCTR| is a macro that defines -% the printed version of counter \Lcount{CTR}. It is defined in -% terms of the following macros: -% -% |\arabic{|\Lcount{COUNTER}|}| prints the value of -% \Lcount{COUNTER} as an arabic numeral. -% -% |\roman{|\Lcount{COUNTER}|}| prints the value of -% \Lcount{COUNTER} as a lowercase roman numberal. -% -% |\Roman{|\Lcount{COUNTER}|}| prints the value of -% \Lcount{COUNTER} as an uppercase roman numberal. -% -% |\alph{|\Lcount{COUNTER}|}| prints the value of \Lcount{COUNTER} -% as a lowercase letter: $1 =$~a, $2 =$~ b, etc. -% -% |\Alph{|\Lcount{COUNTER}|}| prints the value of \Lcount{COUNTER} -% as an uppercase letter: $1 =$~A, $2 =$~B, etc. -% -% \begin{macrocode} -\renewcommand\thepart {\Roman{part}} -\renewcommand\thechapter {\arabic{chapter}} -\renewcommand\thesection {\thechapter.\arabic{section}} -\renewcommand\thesubsection {\thesection.\arabic{subsection}} -\renewcommand\thesubsubsection {\thesubsection .\arabic{subsubsection}} -\renewcommand\theparagraph {\thesubsubsection.\arabic{paragraph}} -\renewcommand\thesubparagraph {\theparagraph.\arabic{subparagraph}} -% \end{macrocode} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% -% \begin{macro}{\@chapapp} -% |\@chapapp| is initially defined to be `|\chaptername|'. The -% |\appendix| command redefines it to be `|\appendixname|'. -% -% \begin{macrocode} -\newcommand\@chapapp{\chaptername} -% \end{macrocode} -% \end{macro} -% -% \subsubsection{Parts} -% -% \begin{macro}{\part} -% The command to start a new part of our document. -% -% We start a new (righthand) page and use the \pstyle{empty}. -% \begin{macrocode} -\newcommand\part{\cleardoublepage - \thispagestyle{empty}% -% \end{macrocode} -% When we are making a two column document, this will be a one -% column page. We use |@tempswa| to remember to switch back to two -% columns. -% \begin{macrocode} - \if@twocolumn - \onecolumn - \@tempswatrue - \else - \@tempswafalse - \fi -% \end{macrocode} -% We need an empty box to prevent the fil glue from disappearing. -% \begin{macrocode} - \hbox{}\vfil -% \end{macrocode} -% Here we use |\secdef| to indicate wwhich commands to use to make -% the actual heading. -% \begin{macrocode} - \secdef\@part\@spart} -% \end{macrocode} -% -% \begin{macro}{\@part} -% This macro does the actual formatting of the title of the part. -% -% \begin{macro}{\PartFont} -% The font used to typeset the part is stored in this maro. -% \begin{macrocode} -\newcommand\PartFont{\bfseries} -% \end{macrocode} -% \end{macro} -% -% When \Lcount{secnumdepth} is larger than $-2$ for this document -% class, we have a numbered part, otherwise it is unnumbered. -% \begin{macrocode} -\def\@part[#1]#2{% - \ifnum \c@secnumdepth >-2\relax - \refstepcounter{part}% - \addcontentsline{toc}{part}{\thepart\hspace{1em}\toc@case{#1}}% - \else - \addcontentsline{toc}{part}{\toc@case{#1}}% - \fi -% \end{macrocode} -% We empty the mark registers and center the title on the page. -% Also we prevent breaking between lines and reset the font. -% \begin{macrocode} - \markboth{}{} - {\centering - \interlinepenalty \@M - \reset@font -% \end{macrocode} -% When this is a numbered part we have to print the number. We have -% to expand |\partname| before |\uppercase| is called, therefore we -% use a temporary control sequence that, when called will execute -% |\uppercase| on the contents of |\partname|. -% \begin{macrocode} - \ifnum \c@secnumdepth >-2\relax - \Large\PartFont - \edef\@tempa{\noexpand\uppercase{\partname}}\@tempa~\thepart - \par -% \end{macrocode} -% We leave some space before we print the title and leave the -% finishing up to |\@endpart|. -% \begin{macrocode} - \vskip 20\p@ - \fi - \Large \PartFont \uppercase{#2}\par}% - \@endpart} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\@spart} -% This macro does the actual formatting of the title of the part -% when the star form of the user command was used. In this case we -% {\em never} print a number. Otherwise the formatting is the same. -% -% \begin{macrocode} -\def\@spart#1{% - {\centering - \interlinepenalty \@M - \reset@font - \Large \PartFont #1\par}% - \@endpart} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\@endpart} -% This macro finishes the part page, for both |\@part| and -% |\@spart|. -% -% First we fill the current page. -% \begin{macrocode} -\def\@endpart{\vfil\newpage -% \end{macrocode} -% Then, when we are in twosided mode, we produce a completely blank -% page. -% \begin{macrocode} - \if@twoside - \hbox{}% - \thispagestyle{empty}% - \newpage - \fi -% \end{macrocode} -% When this was a two column document we have to switch back to two -% column mode. -% \begin{macrocode} - \if@tempswa - \twocolumn - \fi} -% \end{macrocode} -% \end{macro} -% \end{macro} -% -% \subsubsection{Chapters} -% -% \begin{macro}{\chapter} -% A chapter should always start on a new page therefore we start by -% calling |\clearpage| and setting the pagestyle for this page to -% \pstyle{plain}. -% \begin{macrocode} -\newcommand\chapter{\if@openright\cleardoublepage\else\clearpage\fi - \thispagestyle{plain}% -% \end{macrocode} -% Then we prevent floats from appearing at the top of this page -% because it looks weird to see a floating object above a chapter -% title. -% \begin{macrocode} - \global\@topnum\z@ -% \end{macrocode} -% Then we suppress the indentation of the first paragraph by -% setting the switch |\@afterindent| to |false|. We use |\secdef| -% to specify the macros to use for actually setting the chapter -% title. -% \begin{macrocode} - \@afterindentfalse - \secdef\@chapter\@schapter} -% \end{macrocode} -% -% \begin{macro}{\@chapter} -% This macro is called when we have a numbered chapter. When -% \Lcount{secnumdepth} is larger than $-1$ we display the chapter -% number. We also inform the user that a new chapter is about to be -% typeset by writing a message to the terminal. -% \begin{macrocode} -\def\@chapter[#1]#2{% - \ifnum \c@secnumdepth >\m@ne - \refstepcounter{chapter}% - \typeout{\@chapapp\space\thechapter.}% - \addcontentsline{toc}{chapter}% - {\protect\numberline{\thechapter}\toc@font0 #1}% - \else - \addcontentsline{toc}{chapter}{\toc@font0 #1}% - \fi -% \end{macrocode} -% After having written an entry to the table of contents we store -% the (alternative) title of this chapter with |\chaptermark| and -% add some white space to the lists of figures and tables. -% \begin{macrocode} - \chaptermark{#1}% - \addtocontents{lof}{\protect\addvspace{10\p@}}% - \addtocontents{lot}{\protect\addvspace{10\p@}}% -% \end{macrocode} -% Then we call upon |\@makechapterhead| to format the actual -% chapter title. We have to do this in a special way when we are in -% twocolumn mode in order to have the chapter title use the entire -% |\textwidth|. In one column mode we call |\@afterheading| which -% takes care of suppressing the indentation. -% \begin{macrocode} - \if@twocolumn - \@topnewpage[\@makechapterhead{#2}]% - \else - \@makechapterhead{#2}% - \@afterheading - \fi} -% \end{macrocode} -% -% \begin{macro}{\ChapFont} -% The font used to typeset the chapters is stored in this maro. -% \begin{macrocode} -\newcommand\ChapFont{\bfseries} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\@makechapterhead} -% The macro above uses |\@makechapterhead|\meta{text} to format the -% heading of the chapter. -% -% We begin by leaving some white space. The we open a group in -% which we have a paragraph indent of 0pt, and in which we have the -% text set ragged right. We also reset the font. -% \begin{macrocode} -\def\@makechapterhead#1{% - \vspace*{50\p@ \@plus 5\p@}% - {\setlength\parindent{\z@}% - \setlength\parskip {\z@}% - \head@style \reset@font -% \end{macrocode} -% Then we check whether the number of the chapter has to be printed. -% If so we leave some whitespace between the chapternumber and its -% title. -% \begin{macrocode} - \ifnum \c@secnumdepth >\m@ne - \Large\ChapFont \@chapapp{} \thechapter - \par - \vskip 20\p@ - \fi -% \end{macrocode} -% Now we set the title in a large bold font. We prevent a pagebreak -% at this point and leave some whitespace before the text begins. -% \begin{macrocode} - \Large \ChapFont #1\par - \nobreak - \vskip 40\p@ - }} -% \end{macrocode} -% \end{macro} -% \end{macro} -% -% \begin{macro}{\@schapter} -% This macro is called when we have an unnumbered chapter. It is -% much simpler than |\@chapter| because it only needs to typeset -% the chapter title. -% \begin{macrocode} -\def\@schapter#1{\if@twocolumn - \@topnewpage[\@makeschapterhead{#1}]% - \else - \@makeschapterhead{#1}% - \@afterheading - \fi} -% \end{macrocode} -% -% \begin{macro}{\@makeschapterhead} -% The macro above uses |\@makeschapterhead|\meta{text}to format -% the heading of the chapter. It is similar to |\@makechapterhead| -% except that it never has to print a chapter number. -% -% \begin{macrocode} -\def\@makeschapterhead#1{% - \vspace*{50\p@\@plus 5\p@}% - {\setlength\parindent{\z@}% - \setlength\parskip{\z@}% - \head@style - \reset@font - \Large \ChapFont #1\par - \nobreak - \vskip 40\p@ - }} -% \end{macrocode} -% \end{macro} -% \end{macro} -% \end{macro} -% -% -% \subsubsection{Lower level headings} -% -% These commands all make use of |\@startsection|. -% \begin{macro}{\section} -% This gives a normal heading with white space above the heading -% (the whitespace below the heading will be generated by the -% |\parskip| that is inserted at the start of the first paragraph), -% the title set in |\large\bfseries|, and no indentation on the -% first paragraph. -% \begin{macrocode} -\newcommand\section{% - \@startsection {section}{1}{\z@}% - {-2\baselineskip\@plus -1\baselineskip \@minus -.5\baselineskip}% -%<+type1> {.5\baselineskip}% -%<+type3> {.01\baselineskip}% - {\reset@font\large\SectFont}} -% \end{macrocode} -% -% \begin{macro}{\SectFont} -% The font used to typeset the sections is stored in this maro. -% \begin{macrocode} -\newcommand\SectFont{\bfseries} -% \end{macrocode} -% \end{macro} -% \end{macro} -% -% \begin{macro}{\subsection} -% This gives a normal heading with white space above the heading, -% the title set in |\normalsize\bfseries|, and no indentation on -% the first paragraph. -% \begin{macrocode} -\newcommand\subsection{% - \@startsection{subsection}{2}{\z@}% - {-1\baselineskip\@plus -.5\baselineskip \@minus -.25\baselineskip}% -%<+type1> {.25\baselineskip}% -%<+type3> {.01\baselineskip}% - {\reset@font\normalsize\SSectFont}} -% \end{macrocode} -% -% \begin{macro}{\SSectFont} -% The font used to typeset the subsections is stored in this maro. -% \begin{macrocode} -\newcommand\SSectFont{\bfseries} -% \end{macrocode} -% \end{macro} -% \end{macro} -% -% \begin{macro}{\subsubsection} -% This gives a normal heading with white space above the heading, -% the title set in |\normalsize\tm|, and no indentation on the -% first paragraph. -% \begin{macrocode} -\newcommand\subsubsection{% - \@startsection{subsubsection}{3}{\z@}% - {-1\baselineskip plus -.5\baselineskip minus -.25\baselineskip}% -%<+type1> {.25\baselineskip}% -%<+type3> {.01\baselineskip}% - {\reset@font\normalsize\SSSectFont}} -% \end{macrocode} -% -% \begin{macro}{\SSSectFont} -% The font used to typeset the subsubsections is stored in this maro. -% \begin{macrocode} -\newcommand\SSSectFont{\rmfamily} -\newcommand\SSSectFont{\slshape} -% \end{macrocode} -% \end{macro} -% \end{macro} -% -% \begin{macro}{\paragraph} -% This gives a run-in heading with white space above and to the -% right of the heading, the title set in |\normalsize\slshape|. -% \begin{macrocode} -\newcommand\paragraph{% - \@startsection{paragraph}{4}{\z@}% - {3.25ex \@plus1ex \@minus.2ex}% - {-1em}% - {\reset@font\normalsize\ParaFont}} -% \end{macrocode} -% -% \begin{macro}{\ParaFont} -% The font used to typeset the paragraphs is stored in this maro. -% \begin{macrocode} -\newcommand\ParaFont{\slshape} -% \end{macrocode} -% \end{macro} -% \end{macro} -% -% \begin{macro}{\subparagraph} -% This gives an indented run-in heading with white space above and -% to the right of the heading, the title set in -% |\normalsize\slshape|. -% \begin{macrocode} -\newcommand\subparagraph{% - \@startsection{subparagraph}{5}{\parindent}% - {3.25ex \@plus1ex \@minus .2ex}% - {-1em}% - {\reset@font\normalsize\SParaFont}} -% \end{macrocode} -% -% \begin{macro}{\SParaFont} -% The font used to typeset the subparagraphs is stored in this maro. -% \begin{macrocode} -\newcommand\SParaFont{\slshape} -% \end{macrocode} -% \end{macro} -% \end{macro} -% -% \begin{macro}{\Headingfonts} -% To change the fonts that are used to typeset the title,part, -% chapter and section headings this macro can be used. -% \begin{macrocode} -\newcommand\HeadingFonts[8]{% - \renewcommand\TitleFont{#1}% - \renewcommand\PartFont{#2}% - \renewcommand\ChapFont{#3}% - \renewcommand\SectFont{#4}% - \renewcommand\SSectFont{#5}% - \renewcommand\SSSectFont{#6}% - \renewcommand\ParaFont{#7}% - \renewcommand\SParaFont{#8}} -% \end{macrocode} -% \end{macro} -% -% \subsection{Lists} -% -% \subsubsection{General List Parameters} -% -% The following commands are used to set the default values for the list -% environment's parameters. See the \LaTeX{} manual for an explanation -% of the meanings of the parameters. Defaults for the list -% environment are set as follows. First, |\rightmargin|, -% |\listparindent| and |\itemindent| are set to 0pt. Then, for a Kth -% level list, the command |\@listK| is called, where `K' denotes `i', -% '`i', ... , `vi'. (I.e., |\@listiii| is called for a third-level -% list.) By convention, |\@listK| should set |\leftmargin| to -% |\leftmarginK|. -% -% \begin{macro}{\leftmargin} -% \begin{macro}{\leftmargini} -% \begin{macro}{\leftmarginii} -% \begin{macro}{\leftmarginiii} -% \begin{macro}{\leftmarginiv} -% \begin{macro}{\leftmarginv} -% \begin{macro}{\leftmarginvi} -% For efficiency, level-one list's values are defined at top level, and -% |\@listi| is defined to set only |\leftmargin|. -% -% \begin{macrocode} -\setlength\leftmargini {\unitindent} -\setlength\leftmarginii {\othermargin} -\setlength\leftmarginiii{\othermargin} -\setlength\leftmarginiv {\othermargin} -\setlength\leftmarginv {\othermargin} -\setlength\leftmarginvi {1em} -% \end{macrocode} -% Here we set the top level leftmargin. -% \begin{macrocode} -\setlength\leftmargin {\leftmargini} -% \end{macrocode} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% -% \begin{macro}{\labelsep} -% \begin{macro}{\labelwidth} -% |\labelsep| is the distance between the label and the text of an -% item; |\labelwidth| is the width of the label. -% \begin{macrocode} -\setlength \labelsep {5\p@} -\setlength \labelwidth{\leftmargini} -\addtolength\labelwidth{-\labelsep} -% \end{macrocode} -% \end{macro} -% \end{macro} -% -% \begin{macro}{\partopsep} -% When the user leaves a blank line before the environment an extra -% vertical space of |\partopsep| is inserted, in addition to -% |\parskip| and |\topsep|. -% \begin{macrocode} -\setlength\partopsep{\z@} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\topsep} -% Extra vertical space, in addition to |\parskip|, added above and -% below list and paragraphing environments. -% \begin{macrocode} -\setlength\topsep{\z@} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\@beginparpenalty} -% \begin{macro}{\@endparpenalty} -% These penalties are inserted before and after a list or paragraph -% environment. They are set to a bonus value to encourage page -% breaking at these points. -% \begin{macro}{\@itempenalty} -% This penalty is inserted between list items. -% \begin{macrocode} -\@beginparpenalty -\@lowpenalty -\@endparpenalty -\@lowpenalty -\@itempenalty -\@lowpenalty -% \end{macrocode} -% \end{macro} -% \end{macro} -% \end{macro} -% -% \begin{macro}{\@listI} -% \begin{macro}{\@listi} -% |\@listI| defines top level and |\@listi| values of -% |\leftmargin|, |\parsep|, |\topsep|, and |\itemsep| -% -% \begin{macrocode} -\def\@listI{% - \leftmargin\unitindent - \labelsep.5em% - \labelwidth\leftmargin - \advance\labelwidth-\labelsep - \parsep \z@ -%<-type3> \topsep 0\p@ \@plus\p@ -%<+type3> \topsep -.5\parskip \@plus\p@ - \itemsep 0\p@ \@plus1\p@} -\let\@listi\@listI -% \end{macrocode} -% We have to initialise these parameters. -% \begin{macrocode} -\@listi -% \end{macrocode} -% \end{macro} -% \end{macro} -% -% \begin{macro}{\@listii} -% \begin{macro}{\@listiii} -% \begin{macro}{\@listiv} -% \begin{macro}{\@listv} -% \begin{macro}{\@listvi} -% Here are the same macros for the higher level lists. -% \begin{macrocode} -\def\@listii {\leftmargin\leftmarginii - \labelsep .5em% - \labelwidth\leftmarginii - \advance\labelwidth-\labelsep -%<-type3> \topsep 0\p@ \@plus\p@ -%<+type3> \topsep -.5\parskip\@plus\p@ - \parsep \z@ - \itemsep \z@ \@plus\p@} -\def\@listiii{\leftmargin\leftmarginiii - \labelsep .5em% - \labelwidth\leftmarginiii - \advance\labelwidth-\labelsep -%<-type3> \topsep 0\p@ \@plus\p@ -%<+type3> \topsep -.5\parskip\@plus\p@ - \parsep \z@ - \partopsep \z@ \@plus\p@ - \itemsep \z@ \@plus\p@} -\def\@listiv {\leftmargin\leftmarginiv - \labelsep .5em% - \labelwidth\leftmarginiv% - \advance\labelwidth-\labelsep -%<-type3> \topsep 0\p@ \@plus\p@ -%<+type3> \topsep -.5\parskip\@plus\p@ - \parsep \z@ - \itemsep \z@ \@plus\p@} -\def\@listv {\leftmargin\leftmarginv - \labelsep .5em% - \labelwidth\leftmarginv - \advance\labelwidth-\labelsep% -%<-type3> \topsep 0\p@ \@plus\p@ -%<+type3> \topsep -.5\parskip\@plus\p@ - \parsep \z@ - \itemsep \z@ \@plus\p@} -\def\@listvi {\leftmargin\leftmarginvi - \labelsep .5em - \labelwidth\leftmarginvi - \advance\labelwidth{-\labelsep}% -%<-type3> \topsep 0\p@ \@plus\p@ -%<+type3> \topsep -.5\parskip\@plus\p@ - \parsep \z@ - \itemsep \z@ \@plus\p@} -% \end{macrocode} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% -% \subsubsection{Enumerate} -% -% The enumerate environment uses four counters: \Lcount{enumi}, -% \Lcount{enumii}, \Lcount{enumiii} and \Lcount{enumiv}, where -% \Lcount{enumN} controls the numbering of the Nth level -% enumeration. -% -% \begin{macro}{\theenumi} -% \begin{macro}{\theenumii} -% \begin{macro}{\theenumiii} -% \begin{macro}{\theenumiv} -% The counters are already defined in \file{latex.dtx}, but their -% representation is changed here. -% -% \begin{macrocode} -\renewcommand\theenumi{\arabic{enumi}} -\renewcommand\theenumii{\alph{enumii}} -\renewcommand\theenumiii{\roman{enumiii}} -\renewcommand\theenumiv{\Alph{enumiv}} -% \end{macrocode} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% -% \begin{macro}{\labelenumi} -% \begin{macro}{\labelenumii} -% \begin{macro}{\labelenumiii} -% \begin{macro}{\labelenumiv} -% The label for each item is generated by the commands\\ -% |\labelenumi| ... |\labelenumiv|. -% \begin{macrocode} -\newcommand\labelenumi{\theenumi.} -\newcommand\labelenumii{(\theenumii)} -\newcommand\labelenumiii{\theenumiii.} -\newcommand\labelenumiv{\theenumiv.} -% \end{macrocode} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% -% \begin{macro}{\p@enumii} -% \begin{macro}{\p@enumiii} -% \begin{macro}{\p@enumiv} -% The expansion of |\p@enumN||\theenumN| defines the output of a -% |\ref| command when referencing an item of the Nth level of an -% enumerated list. -% \begin{macrocode} -\renewcommand\p@enumii{\theenumi} -\renewcommand\p@enumiii{\theenumi(\theenumii)} -\renewcommand\p@enumiv{\p@enumiii\theenumiii} -% \end{macrocode} -% \end{macro} -% \end{macro} -% \end{macro} -% -% -% \begin{environment}{enumerate} -% We want to have different label positioning on different levels of -% list. To acheive this we have to redefine the \Lenv{enumerate} -% environment. -% -% \begin{macrocode} -\renewenvironment{enumerate}{% - \ifnum \@enumdepth >3 - \@toodeep - \else - \advance\@enumdepth \@ne - \edef\@enumctr{enum\romannumeral\the\@enumdepth}% - \list{\csname label\@enumctr\endcsname} - {\usecounter{\@enumctr}% -%<+type1> \ifnum \@listdepth=1 - \if@revlabel - \def\makelabel##1{\hskip .5\unitindent{##1\hfil}}% - \else -%<-type3> \def\makelabel##1{\hfil##1} -%<+type3> \def\makelabel##1{##1\hfil} - \fi -%<*type1> - \else - \def\makelabel##1{##1\hfil}% -% - \fi - }% - \fi} -% \end{macrocode} -% We try to suppress spaces after these list constructs. -% \begin{macrocode} - {\global\@ignoretrue \endlist} -% \end{macrocode} -% \end{environment} -% -% \subsubsection{Itemize} -% -% \begin{macro}{\labelitemi} -% \begin{macro}{\labelitemii} -% \begin{macro}{\labelitemiii} -% \begin{macro}{\labelitemiv} -% Itemization is controlled by four commands: |\labelitemi|, -% |\labelitemii|, |\labelitemiii|, and |\labelitemiv|, which define -% the labels of thevarious itemization levels: the symbols used are -% bullet, bold en-dash, asterisk and centred dot. -% -% \begin{macrocode} -\newcommand\labelitemi{$\m@th\bullet$} -\newcommand\labelitemii{\bfseries --} -\newcommand\labelitemiii{$\m@th\ast$} -\newcommand\labelitemiv{$\m@th\cdot$} -% \end{macrocode} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% -% \begin{environment}{itemize} -% We want to have differen label positioning on different levels of -% list. To acheive this we have to redefine the \Lenv{itemize} -% environment. -% \begin{macrocode} -\renewenvironment{itemize}{% - \ifnum \@itemdepth >3 - \@toodeep - \else - \advance\@itemdepth \@ne - \edef\@itemitem{labelitem\romannumeral\the\@itemdepth}% - \list{\csname\@itemitem\endcsname}% - {% -%<+type1> \ifnum \@listdepth=1\relax - \if@revlabel - \def\makelabel##1{\hskip .5\unitindent{##1\hfil}}\else -%<+type1> \def\makelabel##1{\hfil##1} -%<+type3> \def\makelabel##1{##1\hfil} - \fi -%<*type1> - \else - \def\makelabel##1{##1\hfil} - \fi -% - }% - \fi} -% \end{macrocode} -% We try to suppress spaces after these list constructs. -% \begin{macrocode} - {\global\@ignoretrue \endlist} -% \end{macrocode} -% \end{environment} -% -% \subsubsection{Description} -% -% \begin{environment}{description} -% The description environment is defined here -- while the itemize -% and enumerate environments are defined in \file{latex.dtx}. -% -% \begin{macrocode} -\newenvironment{description} - {\list{}{\labelwidth\z@ \itemindent-\leftmargin - \let\makelabel\descriptionlabel}} - {\endlist} -% \end{macrocode} -% \end{environment} -% -% \begin{macro}{\descriptionlabel} -% To change the formatting of the label, you must redefine -% |\descriptionlabel|. -% -% \begin{macrocode} -\newcommand\descriptionlabel[1]{\hspace\labelsep \bfseries #1} -% \end{macrocode} -% \end{macro} -% -% \subsection{Adapting existing environments} -% -% Because we globally set |\topsep| to zero, we need to modify the -% definitions of a number of environments slightly to get a litle -% whitespace around them. -% -% \begin{environment}{center} -% Add a litle surrounding whitespace. -% \begin{macrocode} -%<*type1> -\def\center - {\topsep=.25\baselineskip \@plus .1\baselineskip - \@minus .1\baselineskip - \trivlist \centering\item[]} -\let\endcenter\endtrivlist -% \end{macrocode} -% \end{environment} -% -% \begin{environment}{flushleft} -% Add a litle surrounding whitespace. -% \begin{macrocode} -\def\flushleft - {\topsep=.25\baselineskip \@plus .1\baselineskip - \@minus .1\baselineskip - \trivlist \raggedright\item[]} -\let\endflushleft=\endtrivlist -% \end{macrocode} -% \end{environment} -% -% \begin{environment}{flushright} -% Add a litle surrounding whitespace. -% \begin{macrocode} -\def\flushright - {\topsep=.25\baselineskip \@plus .1\baselineskip - \@minus .1\baselineskip - \trivlist \raggedleft\item[]} -\let\endflushright=\endtrivlist -% -% \end{macrocode} -% \end{environment} -% -% \begin{environment}{verbatim} -% In \Lenv{verbatim} we add a little surrounding whitespace, -% --which for \file{rapport3} is negative to -% compensate for the positive |\parskip|-- but also an indent for -% the \file{rapport1} document class. -% \begin{macrocode} -\def\verbatim{% -%<*type1> - \topsep=.25\baselineskip \@plus .1\baselineskip - \@minus .1\baselineskip - \@verbatim - \leftskip\unitindent -% -%<*type3> - \topsep=-.5\parskip - \@verbatim -% - \frenchspacing\@vobeyspaces \@xverbatim} -%<+type1>\def\endverbatim{\if@newlist \leavevmode\fi\endtrivlist} -% \end{macrocode} -% \end{environment} -% -% \subsection{Defining new environments} -% -% \subsubsection{Abstract} -% -% \begin{environment}{abstract} -% When we are producing a separate titlepage we also put the -% abstract on a page of its own. It will be centred vertically on -% the page. -% -% \begin{macrocode} -\if@titlepage - \newenvironment{abstract}{% - \titlepage - \null\vfil - \hbox{\SectFont \abstractname} - \noindent\ignorespaces} - {\par\vfil\null\endtitlepage} -% \end{macrocode} -% When we are not making a seperate titlepagewe have to check if we -% are in twocolumn mode. In that case the abstract is set as a -% |\section*|, otherwise the abstract is typeset flushleft, an -% amount |\unitindent| smaller as the normal text. -% \begin{macrocode} -\else - \newenvironment{abstract}{% - \if@twocolumn - \section*{\abstractname}% - \else - \small - \bgroup\rightskip=\unitindent - \hbox{\SectFont \abstractname}% - \noindent\ignorespaces -% \end{macrocode} - \fi} -% \end{macrocode} -% Which implies that the definition of |\end{abstract}| is also -% different. -% \begin{macrocode} - {\if@twocolumn\else\par\egroup\fi} -\fi -% \end{macrocode} -% \end{environment} -% -% \subsubsection{Verse} -% -% \begin{environment}{verse} -% The verse environment is defined by making clever use of the -% list environment's parameters. The user types |\\| to end a line. -% This is implemented by |\let|'ing |\\| equal |\@centercr|. -% -% \begin{macrocode} -\newenvironment{verse} - {\let\\=\@centercr - \list{}{\itemsep\z@ - \itemindent-1.5em% - \listparindent\itemindent - \rightmargin\leftmargin - \advance\leftmargin1.5em}% - \item[]} - {\endlist} -% \end{macrocode} -% \end{environment} -% -% \subsubsection{Quotation} -% -% \begin{environment}{quotation} -% The quotation environment is also defined by making clever use of -% the list environment's parameters. The lines in the environment -% are set smaller than |\textwidth|. The first line of a paragraph -% inside this environment is indented. -% -% \begin{macrocode} -\newenvironment{quotation} - {\list{}{% - \listparindent\z@ - \itemindent\listparindent - \rightmargin\leftmargin - \parsep\z@ \@plus\p@}% - \item[]} - {\endlist} -% \end{macrocode} -% \end{environment} -% -% \subsubsection{Quote} -% -% \begin{environment}{quote} -% The quote environment is like the quotation environment except -% that paragraphs are not indented. -% -% \begin{macrocode} -\newenvironment{quote} - {\list{}{\rightmargin\leftmargin}% - \item[]} - {\endlist} -% \end{macrocode} -% \end{environment} -% -% \subsubsection{Theorem} -% -% \begin{macro}{\@begintheorem} -% \begin{macro}{\@opargbegintheorem} -% \begin{macro}{\@endtheorem} -% These document classes have a slightly modified \Lenv{theorem} -% environment style. Surrounding whitespace is added and an -% initialisation of |\labelsep|. Finally a slanted font instead of -% an italic font is used. -% \begin{macrocode} -\def\@begintheorem#1#2{% - \vskip\baselineskip \labelsep=.5em% - \trivlist - \item[\hskip \labelsep{\bfseries #1\ #2}]\slshape} -\def\@opargbegintheorem#1#2#3{% - \vskip\baselineskip \labelsep=.5em% - \trivlist - \item[\hskip \labelsep{\bfseries #1\ #2\ (#3)}]\slshape} -\def\@endtheorem{\endtrivlist \vskip\baselineskip} -% \end{macrocode} -% \end{macro} -% \end{macro} -% \end{macro} -% -% \subsubsection{Titlepage} -% -% \begin{environment}{titlepage} -% In the normal environments, the titlepage environment does nothing -% but start and end a page, and inhibit page numbers. It also resets -% the page number to zero. In two-column style, it still makes a -% one-column page. -% -% \begin{macrocode} -\newenvironment{titlepage} - { - \if@twocolumn - \@restonecoltrue\onecolumn - \else - \@restonecolfalse\newpage - \fi - \thispagestyle{empty}% - \if@compatibility - \setcounter{page}{0} - \else - \setcounter{page}{1}% - \fi} - {\if@restonecol\twocolumn \else \newpage \fi - \setcounter{page}{1}% - } -% \end{macrocode} -% \end{environment} -% -% \subsubsection{Appendix} -% -% \begin{macro}{\appendix} -% -% The |\appendix| command is not really an environment, it is a -% macro that makes some changes in the way things are done. -% -% In this document class the |\appendix| command must do the -% following: -% \begin{itemize} -% \item reset the chapter and section counters to zero, -% \item set |\@chapapp| to |\appendixname| (for messages), -% \item redefine the chapter counter to produce appendix numbers, -% \item possibly redefine the |\chapter| command if appendix titles -% and headings are to look different from chapter titles and -% headings. -% \end{itemize} -% -% \begin{macrocode} -\newcommand\appendix{\par - \setcounter{chapter}{0}% - \setcounter{section}{0}% - \renewcommand\@chapapp{\appendixname}% - \renewcommand\thechapter{\Alph{chapter}}} -% \end{macrocode} -% \end{macro} -% -% \subsection{Setting parameters for existing environments} -% -% \subsubsection{Array and tabular} -% -% \begin{macro}{\arraycolsep} -% The columns in an array environment are separated by -% 2|\arraycolsep|. -% \begin{macrocode} -\setlength\arraycolsep{5\p@} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\tabcolsep} -% The columns in an tabular environment are separated by -% 2|\tabcolsep|. -% \begin{macrocode} -\setlength\tabcolsep{6\p@} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\arrayrulewidth} -% The width of rules in the array and tabular environments is given -% by |\arrayrulewidth|. -% \begin{macrocode} -\setlength\arrayrulewidth{.4\p@} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\doublerulesep} -% The space between adjacent rules in the array and tabular -% environments is given by |\doublerulesep|. -% \begin{macrocode} -\setlength\doublerulesep{2\p@} -% \end{macrocode} -% \end{macro} -% -% \subsubsection{Tabbing} -% -% \begin{macro}{\tabbingsep} -% This controls the space that the |\'| command puts in. (See -% \LaTeX{} manual for an explanation.) -% \begin{macrocode} -\setlength\tabbingsep{\labelsep} -% \end{macrocode} -% \end{macro} -% -% \subsubsection{Minipage} -% -% \begin{macro}{\@minipagerestore} -% The macro |\@minipagerestore| is called upon entry to a minipage -% environment to set up things that are to be handled differently -% inside a minipage environment. -% -% \begin{macrocode} -%<+type1>\def\@minipagerestore{\parindent\unitindent} -%<*type3> -\def\@minipagerestore{% - \parskip=.5\baselineskip \@plus .1\baselineskip - \@minus .1\baselineskip} -% -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\@mpfootins} -% Minipages have their own footnotes; |\skip||\@mpfootins| plays -% same r\^ole for footnotes in a minipage as |\skip||\footins| does -% for ordinary footnotes. -% -% \begin{macrocode} -\skip\@mpfootins = \skip\footins -% \end{macrocode} -% \end{macro} -% -% \subsubsection{Framed boxes} -% -% \begin{macro}{\fboxsep} -% The space left by |\fbox| and |\framebox| between the box and the -% text in it. -% \begin{macro}{\fboxrule} -% The width of the rules in the box made by |\fbox| and |\framebox|. -% \begin{macrocode} -\setlength\fboxsep{3\p@} -\setlength\fboxrule{.4\p@} -% \end{macrocode} -% \end{macro} -% \end{macro} -% -% \subsubsection{Equation and eqnarray} -% -% \begin{macro}{\theequation} -% The equation counter will be reset at beginning of a new chapter -% and the equation number will be prefixed by the chapter number. -% -% This code must follow the |\chapter| definition, or more exactly -% the definition of the chapter counter. -% \begin{macrocode} -\@addtoreset{equation}{chapter} -\renewcommand\theequation{\thechapter.\arabic{equation}} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\jot} -% |\jot| is the extra space added between lines of an eqnarray -% environment. The default value is used. -% \begin{macrocode} -% \setlength\jot{3pt} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\@eqnnum} -% The macro |\@eqnnum| defines how equation numbers are to appear in -% equations. Again the default is used. -% -% \begin{macrocode} -% \def\@eqnnum{(\theequation)} -% \end{macrocode} -% \end{macro} -% -% \subsection{Floating objects} -% -% The file \file{latex.dtx} only defines a number of tools with -% which floating objects can be defined. This is done in the -% document class. It needs to define the following macros for each -% floating object of type \texttt{TYPE} (e.g., \texttt{TYPE} = -% figure). -% -% \begin{description} -% \item[\texttt{\bslash fps@TYPE}] -% The default placement specifier for floats of type -% \texttt{TYPE}. -% -% \item[\texttt{\bslash ftype@TYPE}] -% The type number for floats of type \texttt{TYPE}. Each -% \texttt{TYPE} has associated a unique positive {\texttt -% TYPE} number, which is a power of two. E.g., figures might -% have type number 1, tables type number 2, programs type -% number 4, etc. -% -% \item[\texttt{\bslash ext@TYPE}] -% The file extension indicating the file on which the contents -% list for float type \texttt{TYPE} is stored. For example, -% |\ext@figure| = `lof'. -% -% \item[\texttt{\bslash fnum@TYPE}] -% A macro to generate the figure number for a caption. For -% example, |\fnum@TYPE| == `Figure |\thefigure|'. -% -% \item[\texttt{\bslash @makecaption{\meta{num}}{\meta{text}}}] -% A macro to make a caption, with \meta{num} the value produced -% by |\fnum@...| and \meta{text} the text of the caption. It -% can assume it's in a |\parbox| of the appropriate width. -% This will be used for {\em all} floating objects. -% -% \end{description} -% -% The actual environment that implements a floating object such as -% a figure is defined using the macros |\@float| and |\end@float|, -% which are defined in \file{latex.dtx}. -% -% An environment that implements a single column floating object is -% started with |\@float{|\texttt{TYPE}|}[|\meta{placement}|]| of type -% \texttt{TYPE} with \meta{placement} as the placement specifier. -% The default value of \meta{PLACEMENT} is defined by |\fps@TYPE|. -% -% The environment is ended by |\end@float|. E.g., |\figure| == -% |\@float|{figure}, |\endfigure| == |\end@float|. -% -% \subsubsection{Figure} -% -% Here is the implementation of the figure environment. -% -% \begin{macro}{\c@figure} -% First we have to allocate a counter to number the figures. In -% this document class the figures are numbered per chapter. -% \begin{macrocode} -\newcounter{figure}[chapter] -\renewcommand\thefigure{\thechapter.\@arabic\c@figure} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\fps@figure} -% \begin{macro}{\ftype@figure} -% \begin{macro}{\ext@figure} -% \begin{macro}{\num@figure} -% Here are the parameters for the floating objects of type `figure'. -% \begin{macrocode} -\def\fps@figure{tbp} -\def\ftype@figure{1} -\def\ext@figure{lof} -\def\fnum@figure{\figurename~\thefigure} -% \end{macrocode} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% -% \begin{environment}{figure} -% \begin{environment}{figure*} -% And the definition of the actual environment. The form with the -% |*| is used for double column figures. -% \begin{macrocode} -\newenvironment{figure} - {\@float{figure}} - {\end@float} -\newenvironment{figure*} - {\@dblfloat{figure}} - {\end@dblfloat} -% \end{macrocode} -% \end{environment} -% \end{environment} -% -% \subsubsection{Table} -% -% Here is the implementation of the table environment. It is very -% much the same as the figure environment. -% -% \begin{macro}{\c@table} -% First we have to allocate a counter to number the tables. In this -% document class the tables are numbered per chapter. -% \begin{macrocode} -\newcounter{table}[chapter] -\renewcommand\thetable{\thechapter.\@arabic\c@table} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\fps@table} -% \begin{macro}{\ftype@table} -% \begin{macro}{\ext@table} -% \begin{macro}{\num@table} -% Here are the parameters for the floating objects of type `table'. -% \begin{macrocode} -\def\fps@table{tbp} -\def\ftype@table{2} -\def\ext@table{lot} -\def\fnum@table{\tablename~\thetable} -% \end{macrocode} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% -% \begin{environment}{table} -% \begin{environment}{table*} -% And the definition of the actual environment. The form with the -% |*| is used for double column tables. -% \begin{macrocode} -\newenvironment{table} - {\@float{table}} - {\end@float} -\newenvironment{table*} - {\@dblfloat{table}} - {\end@dblfloat} -% \end{macrocode} -% \end{environment} -% \end{environment} -% -% \subsubsection{Captions} -% -% \begin{macro}{\@makecaption} -% The |\caption| command calls |\@makecaption| to format the -% caption of floating objects. It gets two arguments, -% \meta{number}, the number of the floating object and \meta{text}, -% the text of the caption. Usually \meta{number} contains a string -% such as `Figure 3.2'. The macro can assume it is called inside a -% |\parbox| of right width, with |\normalsize|. -% -% \begin{macro}{\abovecaptionskip} -% \begin{macro}{\belowcaptionskip} -% These lengths contain the amount of white space to leave above -% and below the caption. -% \begin{macrocode} -\newlength\abovecaptionskip -\newlength\belowcaptionskip -\setlength\abovecaptionskip{10\p@} -\setlength\belowcaptionskip{0\p@} -% \end{macrocode} -% \end{macro} -% \end{macro} -% -% The definition of this macro is |\long| in order to allow more -% then one paragraph in a caption. -% \begin{macrocode} -\long\def\@makecaption#1#2{% - \vskip\abovecaptionskip -% \end{macrocode} -% We want to see if the caption fits on one line on the page, -% therefore we first typeset it in a temporary box. -% \begin{macrocode} - \sbox\@tempboxa{{\CaptionLabelFont#1:} \CaptionTextFont#2}% -% \end{macrocode} -% We can the measure its width. It that is larger than the current -% |\hsize| we typeset the caption as an ordinary paragraph. -% \begin{macrocode} - \ifdim \wd\@tempboxa >\hsize - {\CaptionLabelFont#1:} \CaptionTextFont#2\par -% \end{macrocode} -% If the caption fits, we center it. -% \begin{macrocode} - \else - \hbox to\hsize{\hfil\box\@tempboxa\hfil}% - \fi - \vskip\belowcaptionskip} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\CaptionLabelFont} -% \begin{macro}{\CaptionTextFont} -% These macros can contain the fonts used for typesetting captions. -% By default they do nothing. -% \begin{macrocode} -\newcommand\CaptionLabelFont{\relax} -\newcommand\CaptionTextFont{\relax} -% \end{macrocode} -% \end{macro} -% \end{macro} -% -% \begin{macro}{\CaptionFonts} -% To change the fonts that are used to typeset captions -% this macro can be used. -% \begin{macrocode} -\newcommand\CaptionFonts[2]{% - \renewcommand\CaptionLabelFont{#1}% - \renewcommand\CaptionTextFont{#2}% - } -% \end{macrocode} -% \end{macro} -% -% \subsection{Font changing} -% -% Here we supply the declarative font changing commands that were -% common in \LaTeX\ version 2.09 and earlier. These commands work -% in text mode \emph{and} in math mode. They are provided for -% compatibility, but one should start using the |\text...| and -% |\math...| commands instead. These commands are defined using -% |\DeclareOldFontCommand|, a command with three arguments: the user -% command to be defined; \LaTeX\ commands to execute in text mode -% and \LaTeX\ commands to execute in math mode. -% -% \begin{macro}{\rm} -% \begin{macro}{\tt} -% \begin{macro}{\sf} -% -% The commands to change the family. When in compatibility mode we -% select the `default' font first, to get \LaTeX2.09 behviour. -% \begin{macrocode} -\DeclareOldFontCommand{\rm}{\normalfont\rmfamily}{\mathrm} -\DeclareOldFontCommand{\sf}{\normalfont\sffamily}{\mathsf} -\DeclareOldFontCommand{\tt}{\normalfont\ttfamily}{\mathtt} -% \end{macrocode} -% \end{macro} -% \end{macro} -% \end{macro} -% -% \begin{macro}{\bf} -% The command to change to the bold series. One should use -% |\mdseries| to explicitly switch back to medium series. -% \begin{macrocode} -\DeclareOldFontCommand{\bf}{\normalfont\bfseries}{\mathbf} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\sl} -% \begin{macro}{\it} -% \begin{macro}{\sc} -% -% And the commands to change the shape of the font. The slanted and -% small caps shapes are not available by default as math alphabets, -% so those changes do nothing in math mode. One should use -% |\upshape| to explicitly change back to the upright shape. -% \begin{macrocode} -\DeclareOldFontCommand{\it}{\normalfont\itshape}{\mathit} -\DeclareOldFontCommand{\sl}{\normalfont\slshape}{\relax} -\DeclareOldFontCommand{\sc}{\normalfont\scshape}{\relax} -% \end{macrocode} -% \end{macro} -% \end{macro} -% \end{macro} -% -% \begin{macro}{\cal} -% \begin{macro}{\mit} -% -% The commands |\cal| and |\mit| should only be used in math mode, -% outside math mode they have no effect. Currently the New Font -% Selection Scheme defines these commands to generate warning -% messages. Therefore we have to define them `by hand'. -% \begin{macrocode} -\renewcommand{\cal}{\protect\pcal} -\newcommand{\pcal}{\@fontswitch{\relax}{\mathcal}} -\renewcommand{\mit}{\protect\pmit} -\newcommand{\pmit}{\@fontswitch{\relax}{\mathnormal}} -% \end{macrocode} -% \end{macro} -% \end{macro} -% -% \begin{macro}{\pem} -% The definition of |\pem| is changed here to have slanted instead -% of italic fonts. -% \begin{macrocode} -\def\pem{\@nomath\em \ifdim \fontdimen\@ne\font >\z@ - \upshape \else \slshape \fi} -% \end{macrocode} -% \end{macro} -% -% \section{Cross Referencing} -% \subsection{Table of Contents, etc.} -% -% A |\section| command writes a -% |\contentsline{section}{|\meta{title}|}{|\meta{page}|}| command -% on the \file{.toc} file, where \meta{title} contains the -% contents of the entry and \meta{page} is the page number. If -% sections are being numbered, then \meta{title} will be of the -% form |\numberline{|\meta{num}|}{|\meta{heading}|}| where -% \meta{num} is the number produced by |\thesection|. Other -% sectioning commands work similarly. -% -% A |\caption| command in a `figure' environment writes -% -% |\contentsline{figure}{\numberline{|\meta{num}|}{|% -% \meta{caption}|}}{|\meta{page}|}| -% -% on the .\file{lof} file, where \meta{num} is the number produced -% by |\thefigure| and \meta{caption} is the figure caption. It -% works similarly for a `table' environment. -% -% The command |\contentsline{|\meta{name}|}| expands to -% |\l@|\meta{name}. So, to specify the table of contents, we must -% define |\l@chapter|, |\l@section|, |\l@subsection|, ... ; to -% specify the list of figures, we must define |\l@figure|; and so -% on. Most of these can be defined with either the -% |\@dottedtocline| or the |\@regtocline| command, which work as -% follows. -% -% |\@dottedtocline{|\meta{level}|}{|\meta{indent}|}{|^^A -% \meta{numwidth}|}{|^^A -% \meta{title}|}{|\meta{page}|}| -% -% |\@regtocline{|\meta{level}|}{|\meta{title}|}{|\meta{page}|}| -% -% \begin{description} -% \item[\meta{level}] An entry is produced only if\meta{ level} -% $<=$ value of the \Lcount{tocdepth} counter. Note, -% |\chapter| is level 0, |\section| is level 1, etc. -% \item[\meta{indent}] The indentation from the outer left margin -% of the start of the contents line. -% \item[\meta{numwidth}] The width of a box in which the section -% number is to go, if \meta{title} includes a |\numberline| -% command. -% \end{description} -% -% \begin{macro}{\@pnumwidth} -% \begin{macro}{\@tocrmarg} -% \begin{macro}{\@dotsep} -% This command uses the following three parameters, which are set -% with a |\newcommand| (so em's can be used to make them depend upon -% the font). -% \begin{description} -% \item[\texttt{\bslash @pnumwidth}] The width of a box in which the -% page number is put. -% \item[\texttt{\bslash @tocrmarg}] The right margin for multiple -% line entries. One wants |\@tocrmarg| > or = |\@pnumwidth| -% \item[\texttt{\bslash @dotsep}] Separation between dots, in mu -% units. Should be defined as a number like 2 or 1.7 -% \end{description} -% -% \begin{macrocode} -\newcommand\@pnumwidth{1.55em} -\newcommand\@tocrmarg {2.55em} -\newcommand\@dotsep{4.5} -\setcounter{tocdepth}{2} -% \end{macrocode} -% \end{macro} -% \end{macro} -% \end{macro} -% -% \subsubsection{Table of Contents} -% -% \begin{macro}{\tableofcontents} -% This macro is used to request that \LaTeX{} produces a table of -% contents. The tables of contents, figures etc. are always set in -% single-column style. -% -% \begin{macrocode} -\newcommand\tableofcontents{% - \if@twocolumn - \@restonecoltrue\onecolumn - \else - \@restonecolfalse - \fi -% \end{macrocode} -% The title is set using the |\chapter*| command, making sure that -% the running head --if one is required-- contains the right -% information. -% \begin{macrocode} - \chapter*{\contentsname - \@mkboth{\uppercase{\contentsname}}{\uppercase{\contentsname}}}% -% \end{macrocode} -% The the actual table of contents is made by calling -% |\@starttoc{toc}|. After that we restore twocolumn mode if -% necessary. -% \begin{macrocode} - \@starttoc{toc}% - \if@restonecol\twocolumn\fi - } -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\@starttoc} -% The internal \LaTeXe macro |\@starttoc| needs to be adapted for -% the \file{rapport3} document classes,in order to deal with a the -% fact that for these document classes the |\parskip| is normally -% non-zero. We don't want that in the table of contents. -% \begin{macrocode} -%<*type3> -\def\@starttoc#1{\begingroup - \makeatletter - \parskip\z@ - \@input{\jobname.#1}% - \if@filesw - \expandafter\newwrite\csname tf@#1\endcsname - \immediate\openout \csname tf@#1\endcsname \jobname.#1\relax - \fi \global\@nobreakfalse \endgroup} -% -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\@regtocline} -% These document classes use a different format for the table of -% contents than the standard classes from which they were -% developped. In order to acheive this different format we defined -% the macro |\@regtocline|. -% \begin{macrocode} -\newcommand\@regtocline[3]{% - \ifnum #1>\c@tocdepth - \else - \vskip \z@ plus .2pt - {\hangindent\z@ \@afterindenttrue \interlinepenalty\@M - \leftskip\unitindent - \rightskip=\unitindent plus 1fil - \parfillskip=0cm - \@tempdima=\unitindent - \parindent\z@ - \leavevmode - \hbox{}\hskip -\leftskip\relax#2\nobreak - \hskip 1em \nobreak{\slshape #3}\par - }% - \fi} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\toc@font} -% The changed definition of |\@sect| that we use, selects a -% different font for the table of contents for the various header -% levels. It does this using |\toc@font|. -% \begin{macrocode} -\if@oldtoc - \newcommand\toc@font[1]{\relax} -\else - \newcommand\toc@font[1]{% - \ifcase#1\relax - \bfseries - \or\slshape - \or\rmfamily - \fi} -\fi -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\toc@case} -% The entries for parts are typeset in capital letters in the new -% style of the table of contents. In the old style this isn't -% done. The macro |\toc@case| is used to switch this. -% \begin{macrocode} -\if@oldtoc - \newcommand\toc@case{\relax} -\else - \newcommand\toc@case{\uppercase} -\fi -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\l@part} -% Each sectioning command needs an additional macro to format its -% entry in the table of contents, as described above. The macro for -% the entry for parts is defined in a special way. -% -% First we make sure that if a pagebreak should occur, it occurs -% {\em before} this entry. Also a little whitespace is added and a -% group begun to keep changes local. -% -% First we have the definition from the standard classes. -% \begin{macrocode} -\if@oldtoc -\newcommand\l@part[2]{% - \addpenalty{-\@highpenalty}% - \addvspace{2.25em \@plus\p@}% - \begingroup -% \end{macrocode} -% The macro |\numberline| requires that the width of the box that -% holds the part number is stored in \LaTeX's scratch register -% |\@tempdima|. Therefore we put it there. -% \begin{macrocode} - \setlength\@tempdima{3em}% -% \end{macrocode} -% The we set |\parindent| to 0pt and use |\rightskip| to leave -% enough room for the pagenumbers. To prevent overfull box messages -% the |\parfillskip| is set to a negative value. -% \begin{macrocode} - \parindent \z@ \rightskip \@pnumwidth - \parfillskip -\@pnumwidth -% \end{macrocode} -% Now we can set the entry, in a large bold font. We make sure to -% leave vertical mode, set the part title and add the pagenumber, -% set flush right. -% \begin{macrocode} - {\leavevmode - \large \bfseries #1\hfil \hbox to\@pnumwidth{\hss #2}}\par -% \end{macrocode} -% Prevent a pagebreak immediately after this entry, but use -% |\everypar| to reset the |\if@nobreak| switch. Finally we close -% the group. -% \begin{macrocode} - \nobreak - \global\@nobreaktrue - \everypar{\global\@nobreakfalse\everypar{}} - \endgroup} -% \end{macrocode} -% Then we can introduce our new definition. -% \begin{macrocode} -\else - \newcommand\l@part{\addpenalty{-\@highpenalty} - \addvspace{2.25em \@plus \p@}\@regtocline{0}} -\fi -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\l@chapter} -% This macro formats the entries in the table of contents for -% chapters. It is very similar to |\l@part| -% -% First we make sure that if a pagebreak should occur, it occurs -% {\em before} this entry. Also a little whitespace is added and a -% group begun to keep changes local. -% -% Again we first present the `standard' definition -% \begin{macrocode} -\if@oldtoc -\newcommand\l@chapter[2]{% - \addpenalty{-\@highpenalty}% - \vskip 1.0em \@plus\p@ -% \end{macrocode} -% -% The macro |\numberline| requires that the width of the box that -% holds the part number is stored in \LaTeX's scratch register -% |\@tempdima|. Therefore we put it there. We begin a group, and -% change some of the paragraph parameters. -% \begin{macrocode} - \setlength\@tempdima{1.5em}% - \begingroup - \parindent \z@ \rightskip \@pnumwidth - \parfillskip -\@pnumwidth -% \end{macrocode} -% Then we leave vertical mode and switch to a bold font. -% \begin{macrocode} - \leavevmode \bfseries -% \end{macrocode} -% Because we do not use |\numberline| here, we have do some fine -% tuning `by hand', before we can set the entry. We discourage but -% not disallow a pagebreak immediately after a chapter entry. -% \begin{macrocode} - \advance\leftskip\@tempdima - \hskip -\leftskip - #1\nobreak\hfil \nobreak\hbox to\@pnumwidth{\hss #2}\par - \penalty\@highpenalty - \endgroup} -% \end{macrocode} -% Then we present our new definition. -% \begin{macrocode} -\else - \newcommand\l@chapter{\@regtocline{0}} -\fi -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\l@section} -% In this document class the definition for -% |\l@section| is very simple. -% \begin{macrocode} -\if@oldtoc - \newcommand\l@section {\@dottedtocline{1}{1.5em}{2.3em}} -\else - \newcommand\l@section {\@regtocline{1}} -\fi -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\l@subsection} -% \begin{macro}{\l@subsubsection} -% \begin{macro}{\l@paragraph} -% \begin{macro}{\l@subparagraph} -% All lower level entries are defined using the macro -% |\@dottedtocline| or |\@regtocline| (see above). -% \begin{macrocode} -\if@oldtoc - \newcommand\l@subsection {\@dottedtocline{2}{3.8em}{3.2em}} - \newcommand\l@subsubsection{\@dottedtocline{3}{7.0em}{4.1em}} - \newcommand\l@paragraph {\@dottedtocline{4}{10em}{5em}} - \newcommand\l@subparagraph {\@dottedtocline{5}{12em}{6em}} -\else - \newcommand\l@subsection {\@regtocline{2}} - \newcommand\l@subsubsection{\@regtocline{3}} - \newcommand\l@paragraph {\@regtocline{4}} - \newcommand\l@subparagraph {\@regtocline{5}} -\fi -% \end{macrocode} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% -% \subsubsection{List of figures} -% -% \begin{macro}{\listoffigures} -% This macro is used to request that \LaTeX{} produces a list of -% figures. It is very similar to |\tableofcontents|. -% -% \begin{macrocode} -\newcommand\listoffigures{% - \if@twocolumn - \@restonecoltrue\onecolumn - \else - \@restonecolfalse - \fi - \chapter*{\listfigurename - \@mkboth{\uppercase{\listfigurename}}% - {\uppercase{\listfigurename}}}% - \@starttoc{lof}% - } -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\l@figure} -% This macro produces an entry in the list of figures. -% \begin{macrocode} -\if@oldtoc - \newcommand\l@figure{\@dottedtocline{1}{1.5em}{2.3em}} -\else - \newcommand\l@figure{\@regtocline{1}} -\fi -% \end{macrocode} -% \end{macro} -% -% \subsubsection{List of tables} -% -% \begin{macro}{\listoftables} -% This macro is used to request that \LaTeX{} produces a list of -% tables. It is very similar to |\tableofcontents|. -% -% \begin{macrocode} -\newcommand\listoftables{% - \if@twocolumn - \@restonecoltrue\onecolumn - \else - \@restonecolfalse - \fi - \chapter*{\listtablename - \@mkboth{\uppercase{\listtablename}}{\uppercase{\listtablename}}}% - \@starttoc{lot}% - \if@restonecol\twocolumn\fi - } -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\l@table} -% This macro produces an entry in the list of tables. -% \begin{macrocode} -\let\l@table\l@figure -% \end{macrocode} -% \end{macro} -% -% \subsection{Bibliography} -% -% \begin{macro}{\bibindent} -% The ``open'' bibliography format uses an indentation of -% |\bibindent|. -% \begin{macrocode} -\newdimen\bibindent -\bibindent=1.5em -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\newblock} -% This is a dummy definition for this macro which is used in the -% \textsf{thebibliography} environment. -% \begin{macrocode} -\newcommand\newblock{} -% \end{macrocode} -% \end{macro} -% -% \begin{environment}{thebibliography} -% The `thebibliography' environment executes the following -% commands: -% -% |\renewcommand\newblock{\hskip .11em \@plus .33em \@minus .07em}| -% -- Defines the ``closed'' format, where the blocks (major units -% of information) of an entry run together. -% -% |\sloppy| -- Used because it's rather hard to do line breaks in -% bibliographies, -% -% |\sfcode`\.=1000\relax| -- -% Causes a `.' (period) not to produce an end-of-sentence space. -% -% The implementation of this environment is based on the generic -% list environment. It uses the \Lcount{enumiv} counter internally -% to generate the labels of the list. -% -% When an empty `thebibliography' environment is found, a warning -% is issued. -% -% \begin{macrocode} -\newenvironment{thebibliography}[1] - {\chapter*{\bibname - \@mkboth{\uppercase{\bibname}}% - {\uppercase{\bibname}}}% - \list{\@biblabel{\arabic{enumiv}}}% - {\settowidth\labelwidth{\@biblabel{#1}}% - \leftmargin\labelwidth - \advance\leftmargin\labelsep - \if@openbib - \advance\leftmargin\bibindent - \itemindent -\bibindent - \listparindent \itemindent - \parsep \z@ - \fi - \usecounter{enumiv}% - \let\p@enumiv\@empty - \renewcommand\theenumiv{\arabic{enumiv}}}% - \if@openbib - \renewcommand\newblock{\par} - \else - \renewcommand\newblock{\hskip .11em \@plus.33em \@minus.07em}% - \fi - \sloppy\clubpenalty4000\widowpenalty4000% - \sfcode`\.=\@m} - {\def\@noitemerr{\@warning{Empty `thebibliography' environment}}% - \endlist} -% \end{macrocode} -% \end{environment} -% -% \begin{macro}{\@biblabel} -% The label for a |\bibitem[...]| command is produced by this -% macro. The default from \file{latex.dtx} is used. -% \begin{macrocode} -% \renewcommand\@biblabel[1]{[#1]\hfill} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\@cite} -% The output of the |\cite| command is produced by this macro. The -% default from \file{latex.dtx} is used. -% \begin{macrocode} -% \renewcommand\@cite[1]{[#1]} -% \end{macrocode} -% \end{macro} -% -% \subsection{The index} -% -% \begin{environment}{theindex} -% The environment `theindex' can be used for indices. It makes an -% index with two columns, with each entry a seperate paragraph. At -% the user level the commands |\item|, |\subitem| and |\subsubitem| -% are used to produce index entries of various levels. When a new -% letter of the alphabet is encountered an amount of |\indexspace| -% white space can be added. -% -% \begin{macrocode} -\newenvironment{theindex} - {\if@twocolumn - \@restonecolfalse - \else - \@restonecoltrue - \fi - \columnseprule \z@ - \columnsep 35\p@ - \twocolumn[\@makeschapterhead{\indexname}]% - \@mkboth{\uppercase{\indexname}}% - {\uppercase{\indexname}}% - \thispagestyle{plain}\parindent\z@ - \parskip\z@ \@plus .3\p@\relax - \let\item\@idxitem} -% \end{macrocode} -% When the document continues after the index and it was a one -% column document we have to switch back to one column after the -% index. -% \begin{macrocode} - {\if@restonecol\onecolumn\else\clearpage\fi} -% \end{macrocode} -% \end{environment} -% -% \begin{macro}{\@idxitem} -% \begin{macro}{\subitem} -% \begin{macro}{\subsubitem} -% Thsee macros are used to format the entries in the index. ^^AA ??? -% \begin{macrocode} -\newcommand\@idxitem {\par\hangindent 40\p@} -\newcommand\subitem {\par\hangindent 40\p@ \hspace*{20\p@}} -\newcommand\subsubitem{\par\hangindent 40\p@ \hspace*{30\p@}} -% \end{macrocode} -% \end{macro} -% \end{macro} -% \end{macro} -% -% \begin{macro}{\indexspace} -% The amount of white space that is inserted between `letter -% blocks' in the index. -% \begin{macrocode} -\newcommand\indexspace{\par \vskip 10\p@ \@plus5\p@ \@minus3\p@\relax} -% \end{macrocode} -% \end{macro} -% -% \subsection{Footnotes} -% -% \begin{macro}{\footnoterule} -% Usually, footnotes are separated from the main body of the text -% by a small rule. This rule is drawn by the macro |\footnoterule|. -% We have to make sure that the rule takes no vertical space (see -% \file{plain.tex}) so we compensate for the natural heigth of the -% rule of 0.4pt by adding the right amount of vertical skip. -% -% To prevent the rule from colliding with the footnote we first add -% a little negative vertical skip, then we put the rule and add -% some positive vertical skip. -% \begin{macrocode} -\renewcommand\footnoterule{% - \kern-3\p@ - \kern.5\baselineskip - \hrule\@width\unitindent - \kern.4\baselineskip -} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\c@footnote} -% Footnotes are numbered within chapters. -% \begin{macrocode} -% \newcounter{footnote} -\@addtoreset{footnote}{chapter} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\@makefntext} -% The footnote mechanism of \LaTeX{} calls the macro |\@makefntext| -% to produce the actual footnote. The macro gets the text of the -% footnote as its argument and should use |\@thefnmark| as the mark -% of the footnote. The macro |\@makefntext|is called when -% effectively inside a |\parbox| of width |\columnwidth| (i.e., -% with |\hsize| = |\columnwidth|). -% -% An example of what can be achieved is given by the following piece -% of \TeX\ code. -% \begin{verbatim} -% \long\def\@xmakefntext#1#2{% -% %<-type3> \parindent=.5\unitindent -% %<+type3> \parindent=\z@\parskip=.5\baselineskip -% \def\labelitemi{--}\@revlabeltrue -% {\setbox0=\hbox {#1\hskip.5em plus 1fil}% -% \dimen0=2\wd0 -% \ifdim\dimen0>\unitindent -% \global\unitindent=\dimen0 -% \@indentset -% \fi}% -% \@setpar{\@@par -% \@tempdima \hsize -% \advance\@tempdima-.5\unitindent -% \parshape \@ne .5\unitindent \@tempdima}% -% \par -% \noindent\llap{\hbox to .5\unitindent{#1\hfil}}#2} -% \end{verbatim} -% The effect of this definition is that all lines of the footnote -% are indented by 10pt, while the first line of a new paragraph is -% indented by 1em. To change these dimensions, just substitute the -% desired value for `10pt' (in both places) or `1em'. The mark is -% flushright against the footnote. -% -% In these document classes we use a simpler macro, in which the -% footnote text is set like an ordinary text paragraph, with no -% indentation except on the first line of the footnote. Thus, all -% the macro must do is set |\parindent| to the appropriate value -% for succeeding paragraphs and put the proper indentation before -% the mark. We change the label of itemized lists inside footnotes -% and need to check that the |\unitindent| is large enough for our -% purposes. -% -% For most of the document classes produced from this file we need -% a slightly modified |\@makefntext| on the title page, so we -% introduce an extra macro, |\@xmakefntext|. -% \begin{macrocode} -\def\@makefntext{\@xmakefntext{$\m@th\@thefnmark$.}} -\long\def\@xmakefntext#1{% - \parindent\z@ - \def\labelitemi{--}\@revlabeltrue - {\setbox0=\hbox {#1\hskip.5em plus 1fil} - \dimen0=2\wd0\relax - \ifdim\dimen0>\unitindent - \global\unitindent=\dimen0\relax - \@indentset - \fi} - \leavevmode\hbox to .5\unitindent{#1\hfil}} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\@makefnmark} -% The footnote markers that are printed in the text to point to the -% footnotes should be produced by the macro |\@makefnmark|. We use -% the default definition for it. -% \begin{macrocode} -%\def\@makefnmark{\hbox{$^{\@thefnmark}\m@th$}} -% \end{macrocode} -% \end{macro} -% -% \section{Initialization} -% -% \subsection{Words} -% -% \begin{macro}{\contentsname} -% \begin{macro}{\listfigurename} -% \begin{macro}{\listtablename} -% \begin{macro}{\refname} -% \begin{macro}{\bibname} -% \begin{macro}{\indexname} -% \begin{macro}{\figurename} -% \begin{macro}{\tablename} -% \begin{macro}{\partname} -% \begin{macro}{\chaptername} -% \begin{macro}{\appendixname} -% \begin{macro}{\abstractname} -% \begin{macro}{\seename} -% \begin{macro}{\andname} -% This document class is for documents prepared in the English language. -% To prepare a version for another language, various English words must -% be replaced. All the English words that require replacement are -% defined below in command names. -% -% \begin{macrocode} -\newcommand\contentsname{Contents} -\newcommand\listfigurename{List of Figures} -\newcommand\listtablename{List of Tables} -\newcommand\bibname{Bibliography} -\newcommand\indexname{Index} -\newcommand\figurename{Figure} -\newcommand\tablename{Table} -\newcommand\partname{Part} -\newcommand\chaptername{Chapter} -\newcommand\appendixname{Appendix} -\newcommand\abstractname{Abstract} -\newcommand\seename{see} -\newcommand\andname{and} -% \end{macrocode} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% -% \subsection{Date} -% -% \begin{macro}{\today} -% This macro uses the \TeX\ primitives |\month|, |\day| and |\year| -% to provide the date of the \LaTeX-run. -% \begin{macrocode} -\newcommand\today{\ifcase\month\or - January\or February\or March\or April\or May\or June\or - July\or August\or September\or October\or November\or December\fi - \space\number\day, \number\year} -% \end{macrocode} -% \end{macro} -% -% \subsection{Two column mode} -% -% \begin{macro}{\columnsep} -% This gives the distance between two columns in two column mode. -% \begin{macrocode} -\setlength\columnsep{10\p@} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\columnseprule} -% This gives the width of the rule between two columns in two -% column mode. We have no visible rule. -% \begin{macrocode} -\setlength\columnseprule{0\p@} -% \end{macrocode} -% \end{macro} -% -% \subsection{The page style} -% -% We have \pstyle{plain} pages unless the user specified -% otherwise. We use arabic pagenumbers. -% \begin{macrocode} -\pagestyle{plain} -\pagenumbering{arabic} % Arabic page numbers -% \end{macrocode} -% -% When the \Lopt{twocolumn} option was specified we call -% |\twocolumn| to activate this mode. We try to make each column as -% long as the others, but call |sloppy| to make our life easier. -% \begin{macrocode} -\if@twocolumn - \twocolumn - \sloppy - \flushbottom -% \end{macrocode} -% Normally we call |\onecolumn| to initiate typesetting in one -% column. -% \begin{macrocode} -\else - \onecolumn -\fi -% \end{macrocode} -% -% \begin{macro}{\frenchspacing} -% Controls the amount of space after a punctuation mark. -% \begin{macrocode} -\frenchspacing -% -% \end{macrocode} -% \end{macro} -% -% \Finale -% -\endinput -% diff --git a/macros/latex/contrib/ntgclass/wijzer.dtx b/macros/latex/contrib/ntgclass/wijzer.dtx deleted file mode 100644 index 9033f939ac..0000000000 --- a/macros/latex/contrib/ntgclass/wijzer.dtx +++ /dev/null @@ -1,3560 +0,0 @@ -% \CheckSum{0} -% -% -% \iffalse -%<*dtx> -\Providesfile{wijzer.dtx} -% -%\NeedsTeXFormat{LaTeX2e} -%\ProvidesClass{wijzer} -%\ProvidesFile{wijzer.drv} -%\Providesfile{wijzer.dtx} - [PTT Research computer handboeken] -% -%<*driver> -\documentclass{ptt-ltxdoc} -\usepackage[dutch]{babel} -\CodelineNumbered -\CodelineIndex -\EnableCrossrefs -\DoNotIndex{\',\.,\@M,\@@input,\@addtoreset,\@arabic,\@badmath} -\DoNotIndex{\@centercr,\@cite} -\DoNotIndex{\@dotsep,\@empty,\@float,\@gobble,\@gobbletwo,\@ignoretrue} -\DoNotIndex{\@input,\@ixpt,\@m} -\DoNotIndex{\@minus,\@mkboth,\@ne,\@nil,\@nomath,\@plus,\@set@topoint} -\DoNotIndex{\@tempboxa,\@tempcnta,\@tempdima,\@tempdimb} -\DoNotIndex{\@tempswafalse,\@tempswatrue,\@viipt,\@viiipt,\@vipt} -\DoNotIndex{\@vpt,\@warning,\@xiipt,\@xipt,\@xivpt,\@xpt,\@xviipt} -\DoNotIndex{\@xxpt,\@xxvpt,\\,\ ,\addpenalty,\addtolength,\addvspace} -\DoNotIndex{\advance,\Alph,\alph} -\DoNotIndex{\arabic,\ast,\begin,\begingroup,\bfseries,\bgroup,\box} -\DoNotIndex{\bullet} -\DoNotIndex{\cdot,\cite,\CodelineIndex,\cr,\day,\DeclareOption} -\DoNotIndex{\def,\DisableCrossrefs,\divide,\DocInput,\documentclass} -\DoNotIndex{\DoNotIndex,\egroup,\ifdim,\else,\fi,\em,\endtrivlist} -\DoNotIndex{\EnableCrossrefs,\end,\end@dblfloat,\end@float,\endgroup} -\DoNotIndex{\endlist,\everycr,\everypar,\ExecuteOptions,\expandafter} -\DoNotIndex{\fbox} -\DoNotIndex{\filedate,\filename,\fileversion,\fontsize,\framebox,\gdef} -\DoNotIndex{\global,\halign,\hangindent,\hbox,\hfil,\hfill,\hrule} -\DoNotIndex{\hsize,\hskip,\hspace,\hss,\if@tempswa,\ifcase,\or,\fi,\fi} -\DoNotIndex{\ifhmode,\ifvmode,\ifnum,\iftrue,\ifx,\fi,\fi,\fi,\fi,\fi} -\DoNotIndex{\input} -\DoNotIndex{\jobname,\kern,\leavevmode,\let,\leftmark} -\DoNotIndex{\list,\llap,\long,\m@ne,\m@th,\mark,\markboth,\markright} -\DoNotIndex{\month,\newcommand,\newcounter,\newenvironment} -\DoNotIndex{\NeedsTeXFormat,\newdimen} -\DoNotIndex{\newlength,\newpage,\nobreak,\noindent,\null,\number} -\DoNotIndex{\numberline,\OldMakeindex,\OnlyDescription,\p@} -\DoNotIndex{\pagestyle,\par,\paragraph,\paragraphmark,\parfillskip} -\DoNotIndex{\penalty,\PrintChanges,\PrintIndex,\ProcessOptions} -\DoNotIndex{\protect,\ProvidesClass,\raggedbottom,\raggedright} -\DoNotIndex{\refstepcounter,\relax,\renewcommand,\reset@font} -\DoNotIndex{\rightmargin,\rightmark,\rightskip,\rlap,\rmfamily,\roman} -\DoNotIndex{\roman,\secdef,\selectfont,\setbox,\setcounter,\setlength} -\DoNotIndex{\settowidth,\sfcode,\skip,\sloppy,\slshape,\space} -\DoNotIndex{\symbol,\the,\trivlist,\typeout,\tw@,\undefined,\uppercase} -\DoNotIndex{\usecounter,\usefont,\usepackage,\vfil,\vfill,\viiipt} -\DoNotIndex{\viipt,\vipt,\vskip,\vspace} -\DoNotIndex{\wd,\xiipt,\year,\z@} -\newcommand{\m}[1]{\mbox{$\langle$\it #1\/$\rangle$}} -\providecommand{\marg}[1]{{\ttfamiliy\char`\{}\m{#1}{\ttfamiliy\char`\}}} -\providecommand{\oarg}[1]{{\ttfamiliy[}\m{#1}{\ttfamiliy]}} -\begin{document} -\DocInput{wijzer.dtx} -\clearpage -\PrintIndex -\end{document} -% -% \fi -% -% \GetFileInfo{wijzer.dtx} -% \title{Document Class \texttt{wijzer}} -% \author{Johannes Braams} -% \date{Version~\fileversion, dated~\filedate} -% \maketitle -% \tableofcontents -% \clearpage -% -% \StopEventually{} ^^A -% -% \section{Introduction} -% -% \section{The {\sc docstrip} modules} -% -% The following modules are used in the implementation to direct -% {\sc docstrip} in generating the external files: -% \begin{center} -% \begin{tabular}{ll} -% class & produce the document class\\ -% type1 & produce the `1' variants of the classes\\ -% type3 & produce the `3' variants of the classes\\ -% driver & produce a documentation driver file \\ -% \end{tabular} -% \end{center} -% -% \section{Initial Code} -% -% In this part we define a few commands that are used later on. -% -% \begin{macro}{\@ptsize} -% This control sequence is used to store the second digit of the -% pointsize we are typesetting in. So, normally, it's value is one -% of 0, 1 or 2. -% \begin{macrocode} -%<*class> -\newcommand\@ptsize{} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\if@restonecol} -% When the document has to printed in two columns, we sometimes -% have to temporarily switch to one column. This switch is used to -% remember to switch back. -% \begin{macrocode} -\newif\if@restonecol -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\if@titlepage} -% A switch to indicate if a titlepage has to be produced. -% \begin{macrocode} -\newif\if@titlepage -\@titlepagetrue -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\if@openright} -% A switch to indicate if chapters must start on a right-hand page. -% The default for the report class is no; for the book class it's -% yes. -% \begin{macrocode} -\newif\if@openright -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\if@openbib} -% A switch to indicate if the bibliography has to be produced in -% the ``open'' format. The default is to use a ``closed'' format. -% \begin{macrocode} -\newif\if@openbib -\@openbibfalse -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\if@oldtoc} -% A switch to indicate if `old' layout of the table of contents -% should be produced. These document classes normally produce a -% table of contents that looks quite different from what the -% standard classes produce. -% \begin{macrocode} -\newif\if@oldtoc -\@oldtocfalse -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\if@allcaps} -% By default the text on the titlepage is set in capital letters. -% This can be disabled by the option \Lopt{mctitle}, which sets the -% switch |\if@allcaps| to false. -% \begin{macrocode} -\newif\if@allcaps -% \end{macro} -% -% \begin{macro}{\if@titlecentered} -% In the document classes \file{wijzer3} the -% default placement of the title that is produced by |\maketitle| -% is flushleft. This can be changed by the switch -% |\if@titlecentered|. -% \begin{macrocode} -%<+type3>\newif\if@titlecentered -%<+type3>\@titlecenteredfalse -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\if@revlabel} -% These document classes need to be able to change the positioning -% of the label in labeled lists. This switch is used for that -% purpose. -% \begin{macrocode} -\newif\if@revlabel -% \end{macrocode} -% \end{macro} -% -% \section{Declaration of Options} -% -% -% \subsection{Setting Paper Sizes} -% -% The variables |\paperwidth| and |\paperheight| should reflect the -% physical paper size after trimming. For desk printer output this -% is usually the real paper size since there is no post-processing. -% Classes for real book production will probably add other paper -% sizes and additionally the production of crop marks for trimming. -% \begin{macrocode} -\DeclareOption{a4paper} - {\setlength\paperheight {297mm}% - \setlength\paperwidth {210mm}} -\DeclareOption{a5paper} - {\setlength\paperheight {210mm}% - \setlength\paperwidth {148mm}} -\DeclareOption{b5paper} - {\setlength\paperheight {250mm}% - \setlength\paperwidth {176mm}} -\DeclareOption{letterpaper} - {\setlength\paperheight {11in}% - \setlength\paperwidth {8.5in}} -\DeclareOption{legalpaper} - {\setlength\paperheight {14in}% - \setlength\paperwidth {8.5in}} -\DeclareOption{executivepaper} - {\setlength\paperheight {10.5in}% - \setlength\paperwidth {7.25in}} -% \end{macrocode} -% -% The option \Lopt{landscape} switches the values of |\paperheight| -% and |\paperwidth|, assuming the dimensions wer given for portrait -% paper. -% \begin{macrocode} -\DeclareOption{landscape} - {\setlength\@tempdima {\paperheight}% - \setlength\paperheight {\paperwidth}% - \setlength\paperwidth {\@tempdima}} -% \end{macrocode} -% -% \subsection{Choosing the type size} -% -% The type size options are handled by defining |\@ptsize| to contain -% the last digit of the size in question and branching on |\ifcase| -% statements. This is done for historical reasons to stay compatible -% with other packages that use the |\@ptsize| variable to select -% special actions. It makes the declarations of size options less -% than 10pt difficult, although one can probably use \texttt{9} -% and \texttt{8} assuming that a class won't define both -% \Lopt{8pt} and \Lopt{18pt} options. -% -% \begin{macrocode} -\DeclareOption{10pt}{\renewcommand\@ptsize{0}} -\DeclareOption{11pt}{\renewcommand\@ptsize{1}} -\DeclareOption{12pt}{\renewcommand\@ptsize{2}} -% \end{macrocode} -% -% -% \subsection{Two-side or one-side printing} -% -% For two-sided printing we use the switch |\if@twoside|. In -% addition we have to set the |\if@mparswitch| to get any margin -% paragraphs into the outside margin. -% \begin{macrocode} -\DeclareOption{oneside}{\@twosidefalse \@mparswitchfalse} -\DeclareOption{twoside}{\@twosidetrue \@mparswitchtrue} -% \end{macrocode} -% -% -% \subsection{Draft option} -% -% If the user requests \Lopt{draft} we show any overfull boxes. -% We could probably add some more interesting stuff to this option. -% \begin{macrocode} -\DeclareOption{draft}{\setlength\overfullrule{5pt}} -\DeclareOption{final}{\setlength\overfullrule{0pt}} -% \end{macrocode} -% -% \subsection{Titlepage option} -% An article usually has no separate titlepage, but the user can -% request one. -% \begin{macrocode} -\DeclareOption{titlepage}{\@titlepagetrue} -\DeclareOption{notitlepage}{\@titlepagefalse} -% \end{macrocode} -% -% \subsection{openright option} -% This option determines whether or not a chapter must start on -% a right-hand page -% request one. -% \begin{macrocode} -\DeclareOption{openright}{\@openrighttrue} -\DeclareOption{openany}{\@openrightfalse} -% \end{macrocode} -% -% For these document classes there used to be a file -% \file{voorwerk.sty} which was a replacement for -% \file{titlepag.sty}. Therefore we also have the option -% \Lopt{voorwerk}. -% \begin{macrocode} -\DeclareOption{voorwerk}{\@titlepagetrue} -\DeclareOption{geenvoorwerk}{\@titlepagefalse} -% \end{macrocode} -% -% -% \subsection{Table of contents formatting} -% -% This document class uses a new layout for the table of contents, -% but in order to maintain compatibility with the standard \LaTeXe -% document classes we supply an extra option: \Lopt{oldtoc}. If -% this option is specified the switch |\if@oldtoc| will be set -% true. -% \begin{macrocode} -\DeclareOption{oldtoc}{\@oldtoctrue} -% \end{macrocode} -% -% \subsection{Formatting of the title} -% -% The option \Lopt{titlecentered} changes the behaviour of the -% |\maketitle| command. It then produces a title like it does for -% the \file{artikel1} document class. -% \begin{macrocode} -%<+type3>\DeclareOption{titlecentered}{\@titlecenteredtrue} -% \end{macrocode} -% -% In this document class the titlepage uses all capital -% letters. The option \Lopt{mctitle} (for `mixed case') prevents -% this. -% \begin{macrocode} -\DeclareOption{mctitle}{\@allcapsfalse} -\DeclareOption{uctitle}{\@allcapstrue} -% \end{macrocode} -% -% \subsection{Twocolumn printing} -% -% Two-column and one-column printing is again realized via a switch. -% \begin{macrocode} -\DeclareOption{onecolumn}{\@twocolumnfalse} -\DeclareOption{twocolumn}{\@twocolumntrue} -% \end{macrocode} -% -% \subsection{Equation numbering on the left} -% -% The option \Lopt{leqno} can be used to get the equation numbers -% on the left side of the equation. -% \begin{macrocode} -\DeclareOption{leqno}{\input{leqno.clo}} -% \end{macrocode} -% -% \subsection{Flush left displays} -% -% The option \Lopt{fleqn} redefines the displayed math environmens -% in such a way that they come out flush left, with an indentation -% of |\mathindent| from the prevailing left margin. -% \begin{macrocode} -\DeclareOption{fleqn}{\input{fleqn.clo}} -% \end{macrocode} -% -% \subsection{Open bibliography} -% -% The option \Lopt{openbib} produces the ``open'' bibliography -% style, in which each block starts on a new line, and succeeding -% lines in a block are indented by |\bibindent|. -% \begin{macrocode} -\DeclareOption{openbib}{\@openbibtrue} -% \end{macrocode} -% -% -% \section{Executing Options} -% -% Here we execute the default options to initialize certain -% variables. -% \begin{macrocode} -\ExecuteOptions{a4paper,10pt,oneside,onecolumn,final,uctitle,openany} -% \end{macrocode} -% -% The |\ProcessOptions| command causes the execution of the code -% for every option \Lopt{FOO} -% which is declared and for which the user typed -% the \Lopt{FOO} option in his -% |\documentclass| command. For every option \Lopt{BAR} he typed, -% which is not declared, the option is assumed to be a global option. -% All options will be passed as document options to any -% |\usepackage| command in the document preamble. -% \begin{macrocode} -\ProcessOptions -% \end{macrocode} -% Now that all the options have been executed we can load the -% chosen class option file that contains all size dependent code. -% \begin{macrocode} -\input{ntg1\@ptsize.clo} -% \end{macrocode} -% -% \section{Loading Packages} -% -% These class files do not load additional packages. -% -% -% \section{Document Layout} -% \label{sec:maincode} -% -% In this section we are finally dealing with the nasty typographical -% details. -% -% \subsection{Paragraphing} -% -% \begin{macro}{\lineskip} -% \begin{macro}{\normallineskip} -% These parameters control \TeX's behaviour when two lines tend to -% come too close together. -% \begin{macrocode} -\setlength\lineskip{1\p@} -\setlength\normallineskip{1\p@} -% \end{macrocode} -% \end{macro} -% \end{macro} -% -% \begin{macro}{\baselinestretch} -% This is used as a multiplier for |\baselineskip|. The default is -% to {\em not\/} stretch the baselines. -% \begin{macrocode} -\renewcommand\baselinestretch{} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\unitindent} -% These document classes all use a single dimension for a number of -% layout parameters: -% \begin{itemize} -% \item the label width in section heading, -% \item the |\parindent| -% \item the footnote label indent (= half |\unitindent|) -% \item listindent on the first level -% \end{itemize} -% \begin{macrocode} -\newdimen\unitindent -% \end{macrocode} -% The default setting accomodates three levels of single digit -% section numbering. -% \begin{macrocode} -{\setbox0\hbox{\normalsize\rmfamily 2.2.2\hskip.5em} - \global\unitindent=\wd0} -% \end{macrocode} -% -% \begin{macro}{\othermargin} -% Other indentations are maximal label width plus white space. -% \begin{macrocode} -\newdimen\othermargin -{\setbox0\hbox{\normalsize (m)\hskip.6em}\global\othermargin=\wd0} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{if@needwriteindent} -% If this is not enough, a new width is calculated, set, and the -% file{.aux} file contains an instruction that will set -% |\unitindent| on the next run. -% -% For this we need a switch -% \begin{macrocode} -\newif\if@needwriteindent -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\@indentset} -% And a command that sets the various parameters. -% \begin{macrocode} -\newcommand\@indentset{% -%<-type3> \global\parindent=\unitindent - \global\leftmargini=\unitindent - \global\@needwriteindenttrue} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\@writeindent} -% The |\end{document}| command will call |\@writeindent| to write -% the final width of |\unitindent| on the \file{.aux} file. Also a -% command is written to set |\unitindent|. To be compatible with -% other document classes a check is written to the \file{.aux} file -% for the existence of |\unitindent|. This prevents nasty errors -% when another document class is used. -% \begin{macrocode} -\newcommand\@writeindent[1]{\immediate\write\@mainaux - {\string\@ifundefined{unitindent}{\string\newdimen\string\unitindent - \let\string\@indentset\relax}{}} - \immediate\write\@mainaux{\global\string\unitindent=#1\string\relax - \string\@indentset \string\relax}} -% \end{macrocode} -% \end{macro} -% -% We need to use the hook into |\end{document}| to write the final -% value of |\unitindent| om the file{.aux} file for the next run. -% \begin{macrocode} -\AtEndDocument{% - \if@filesw - \if@needwriteindent - \@writeindent{\the\unitindent} - \fi - \fi} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\parskip} -% \begin{macro}{\parindent} -% |\parskip| gives extra vertical space between paragraphs and -% |\parindent| is the width of the paragraph indentation. The value -% of |\parindent| depends on whether we are in two column mode. -% \begin{macrocode} -%<*type1> -\setlength\parskip{0\p@} -\setlength\parindent{\unitindent} -% -%<*type3> -\setlength\parskip{.5\baselineskip \@plus .1\baselineskip - \@minus .1\baselineskip} -\setlength\parindent{\z@} -% -% \end{macrocode} -% \end{macro} -% \end{macro} -% -% \begin{macro}{\@lowpenalty} -% \begin{macro}{\@medpenalty} -% \begin{macro}{\@highpenalty}% -% The commands |\nopagebreak| and |\nolinebreak| put in penalties -% to discourage these breaks at the point they are put in. -% They use |\@lowpenalty|, |\@medpenalty| or |\@highpenalty|, -% dependent on their argument. -% \begin{macrocode} -\@lowpenalty 51 -\@medpenalty 151 -\@highpenalty 301 -% \end{macrocode} -% \end{macro} -% \end{macro} -% \end{macro} -% -% \begin{macro}{\clubpenalty} -% \begin{macro}{\widowpenalty} -% These penalties are use to discourrage club and widow lines. -% Because we use their default values we only show them here, -% commented out. -% \begin{macrocode} -% \clubpenalty 150 -% \widowpenalty 150 -% \end{macrocode} -% \end{macro} -% \end{macro} -% -% \begin{macro}{\displaywidowpenalty} -% \begin{macro}{\predisplaypenalty} -% \begin{macro}{\postdisplaypenalty} -% Discourrage (but not so much) widows in front of a math display -% and forbid breaking directly in front of a display. Allow break -% after a display without a penalty. Again the default values are -% used, therefore we only show them here. -% \begin{macrocode} -% \displaywidowpenalty 50 -% \predisplaypenalty 10000 -% \postdisplaypenalty 0 -% \end{macrocode} -% \end{macro} -% \end{macro} -% \end{macro} -% -% \begin{macro}{\interlinepenalty} -% Allow the breaking of a page in the middle of a paragraph. -% \begin{macrocode} -% \interlinepenalty 0 -% \end{macrocode} -% \end{macro} -% -% -% \begin{macro}{\brokenpenalty} -% We allow the breaking of a page after a hyphenated line. -% \begin{macrocode} -% \brokenpenalty 0 -% \end{macrocode} -% \end{macro} -% -% \subsubsection{Float placement parameters} -% -% All float parameters are given default values in the \LaTeXe{} -% kernel. For this reason counters only need to be set with -% |\setcounter| and other parameters are set using |\renewcommand|. -% -% \paragraph{Limits for the placement of floating objects} -% -% \begin{macro}{\c@topnumber} -% The \Lcount{topnumber} counter holds the maximum number of -% floats that can appear on the top of a text page. -% \begin{macrocode} -\setcounter{topnumber}{2} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\topfraction} -% This indicates the maximum part of a text page that can be -% occupied by floats at the top. -% \begin{macrocode} -\renewcommand\topfraction{.7} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\c@bottomnumber} -% The \Lcount{bottomnumber} counter holds the maximum number of -% floats that can appear on the bottom of a text page. -% \begin{macrocode} -\setcounter{bottomnumber}{1} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\bottomfraction} -% This indicates the maximum part of a text page that can be -% occupied by floats at the bottom. -% \begin{macrocode} -\renewcommand\bottomfraction{.3} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\c@totalnumber} -% This indicates the maximum number of floats that can appear on -% any text page. -% \begin{macrocode} -\setcounter{totalnumber}{3} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\textfraction} -% This indicates the minimum part of a text page that has to be -% occupied by text. -% \begin{macrocode} -\renewcommand\textfraction{.2} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\floatpagefraction} -% This indicates the minimum part of a page that has to be -% occupied by floating objects before a `float page' is produced. -% \begin{macrocode} -\renewcommand\floatpagefraction{.5} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\c@dbltopnumber} -% The \Lcount{dbltopnumber} counter holds the maximum number of -% two column floats that can appear on the top of a two column text -% page. -% \begin{macrocode} -\setcounter{dbltopnumber}{2} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\dbltopfraction} -% This indicates the maximum part of a two column text page that -% can be occupied by two column floats at the top. -% \begin{macrocode} -\renewcommand\dbltopfraction{.7} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\dblfloatpagefraction} -% This indicates the minimum part of a page that has to be -% occupied by two column wide floating objects before a `float -% page' is produced. -% \begin{macrocode} -\renewcommand\dblfloatpagefraction{.5} -% \end{macrocode} -% \end{macro} -% -% \subsection{Page Styles} -% -% The page style \pstyle{foo} is defined by defining the command -% |\ps@foo|. This command should make only local definitions. -% There should be no stray spaces in the definition, since they -% could lead to mysterious extra spaces in the output (well, that's -% something that should be always avoided). -% -% \begin{macro}{\@evenhead} -% \begin{macro}{\@oddhead} -% \begin{macro}{\@evenfoot} -% \begin{macro}{\@oddfoot} -% The |\ps@...| command defines the macros |\@oddhead|, -% |\@oddfoot|, |\@evenhead|, and |\@evenfoot| to define the running -% heads and feet---e.g., |\@oddhead| is the macro to produce the -% contents of the heading box for odd-numbered pages. It is called -% inside an |\hbox| of width |\textwidth|. -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% -% \begin{macro}{\thispagestyle} -% Several commands (|\index|, |\maketitle|) give a -% |\thispagestyle{plain}| command, which will overrule a -% |\pagestyle{empty}| command. This situation is almost always -% unwanted. Therefore we provide a more careful definition. -% -% First save the original definition. -% \begin{macrocode} -\let\Thispagestyle\thispagestyle -% \end{macrocode} -% Then we provide the new definition, for which we must also adapt -% |\pagestyle| a little. -% \begin{macrocode} -\newcommand\@emptypagestyle{empty} -\renewcommand\pagestyle[1]{\@nameuse{ps@#1}\def\@currentpagestyle{#1}} -\renewcommand\thispagestyle[1]{% - \ifx\@currentpagestyle\@emptypagestyle - \else - \global\@specialpagetrue - \gdef\@specialstyle{#1}% - \fi} -% \end{macrocode} -% \end{macro} -% -% \subsubsection{Marking conventions} -% -% To make headings determined by the sectioning commands, the page -% style defines the commands |\chaptermark|, |\sectionmark|, -% \ldots,\\ -% where |\chaptermark{|\meta{TEXT}|}| is called by -% |\chapter| to set a mark, and so on. -% -% The |\...mark| commands and the |\...head| macros are defined -% with the help of the following macros. (All the |\...mark| -% commands should be initialized to no-ops.) -% -% \LaTeX{} extends \TeX's |\mark| facility by producing two kinds -% of marks, a `left' and a `right' mark, using the following -% commands: -% \begin{flushleft} -% |\markboth{|\meta{LEFT}|}{|\meta{RIGHT}|}|: Adds both marks. -% -% |\markright{|\meta{RIGHT}|}|: Adds a `right' mark. -% -% |\leftmark|: Used in the |\@oddhead|, |\@oddfoot|, |\@evenhead| -% or |\@evenfoot| macros, it gets the current `left' -% mark. |\leftmark| works like \TeX's |\botmark| -% command. -% -% |\rightmark|: Used in the |\@oddhead|, |\@oddfoot|, |\@evenhead| -% or |\@evenfoot| macros, it gets the current -% `right' mark. |\rightmark| works like \TeX's -% |\firstmark| command. -% \end{flushleft} -% -% The marking commands work reasonably well for right marks -% `numbered within' left marks--e.g., the left mark is changed by a -% |\chapter| command and the right mark is changed by a |\section| -% command. However, it does produce somewhat anomalous results if -% two |\markboth|'s occur on the same page. -% -% -% Commands like |\tableofcontents| that should set the marks in some -% page styles use a |\@mkboth| command, which is |\let| by the -% pagestyle command (|\ps@...|) to |\markboth| for setting the -% heading or to |\@gobbletwo| to do nothing. -% -% -% \begin{macrocode} -% %%%\mark{{}{}} % Initializes TeX's marks <--- can vanish -% \end{macrocode} -% -% \subsubsection{Defining the page styles} -% \label{sec:pagestyle} -% -% The pagestyle \pstyle{empty} is defined in \file{latex.dtx}, but -% the pagestyle \pstyle{plain} is slightly altered here. The -% difference is that the page numbers are set flush right in -% onesided and flush left and right in the twosided style. -% -% \begin{macro}{\ps@plain} -% -% \begin{macrocode} -\renewcommand\ps@plain{% -% \end{macrocode} -% The running head are empty in this pagestyle, the page number -% appears in the running foot. -% \begin{macrocode} - \let\@oddhead\@empty\let\@evenhead\@empty - \def\@oddfoot{\hfil\PageFont\thepage}% - \if@twoside - \def\@evenfoot{\PageFont\thepage\hfil}% - \else - \let\@evenfoot\@oddfoot - \fi -% \end{macrocode} -% Because the running heads should be empty we |let| |\@mkboth| to -% |\@gobbletwo|, thus disabling the mark commands. -% \begin{macrocode} - \let\@mkboth\@gobbletwo} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\ps@headings} -% The definition of the page style \pstyle{headings} has to be -% different for two sided printing than it is for one sided -% printing. -% -% \begin{macrocode} -\if@twoside - \def\ps@headings{% -% \end{macrocode} -% The running feet are empty in this page style, the running head -% contains the page number and one of the marks. -% \begin{macrocode} - \let\@oddfoot\@empty\let\@evenfoot\@empty - \def\@evenhead{{\PageFont\thepage}\hfil\MarkFont\leftmark}% - \def\@oddhead{{\MarkFont\rightmark}\hfil\PageFont\thepage}% -% \end{macrocode} -% -% When using this page style, the contents of the running head is -% determined by the chapter and section titles. So we |\let| -% |\@mkboth| to |\markboth|. -% \begin{macrocode} - \let\@mkboth\markboth -% \end{macrocode} -% -% In thisdocument class we use the |\chaptermark| -% and |\sectionmark| macros to fill the running heads. -% -% Note the use of |##1| for the parameter of the |\chaptermark| -% command, which will be defined when |\ps@headings| is executed. -% -% \begin{macrocode} - \def\chaptermark##1{% - \markboth {\uppercase{\ifnum \c@secnumdepth >\m@ne - \@chapapp\ \thechapter. \ \fi - ##1}}{}}% - \def\sectionmark##1{% - \markright {\uppercase{\ifnum \c@secnumdepth >\z@ - \thesection. \ \fi - ##1}}}} -% \end{macrocode} -% -% The definition of |\ps@headings| for one sided printing can be -% much simpler, because we treat even and odd pages the same. -% Therefore we don't need to define |\@even...|. -% \begin{macrocode} -\else - \def\ps@headings{% - \let\@oddfoot\@empty - \def\@oddhead{{\MarkFont\rightmark}\hfil\PageFont\thepage}% - \let\@mkboth\markboth -% \end{macrocode} -% We use |\markright| now instead of |\markboth| as we did for two -% sided printing. -% \begin{macrocode} - \def\chaptermark##1{% - \markright {\uppercase{\ifnum \c@secnumdepth >\m@ne - \@chapapp\ \thechapter. \ \fi - ##1}}}} -\fi -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\ps@myheadings} -% The definition of the page style \pstyle{myheadings} is fairly -% simple because the user determines the contents of the running -% head himself by using the |\markboth| and |\markright| commands. -% -% \begin{macrocode} -\def\ps@myheadings{% - \let\@oddfoot\@empty\let\@evenfoot\@empty - \def\@evenhead{{\PageFont\thepage}\hfil\MarkFont\leftmark}% - \def\@oddhead{{\MarkFont\rightmark}\hfil\PageFont\thepage}% -% \end{macrocode} -% -% We have to make sure that the marking commands that are used by -% the chapter and section headings are disabled. We do this -% |\let|ting them to a macro that gobbles its argument(s). -% \begin{macrocode} - \let\@mkboth\@gobbletwo - \let\chaptermark\@gobble - \let\sectionmark\@gobble - } -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\PageFont} -% \begin{macro}{\MarkFont} -% These macros are use to store the fonts that are used to typeset -% the pagenumber (|\PageFont|) and the marks (|\MarkFont|) in the -% running head and feet. -% \begin{macrocode} -\newcommand\PageFont{\rmfamily} -\newcommand\MarkFont{\slshape} -% \end{macrocode} -% \end{macro} -% \end{macro} -% -% \begin{macro}{\RunningFonts} -% Use this macro to change the fonts that are used in the running -% heads. -% \begin{macrocode} -\newcommand\RunningFonts[2]{% - \renewcommand\PageFont{#1}\renewcommand\MarkFont{#2}} -% \end{macrocode} -% \end{macro} -% -% \section{Document Markup} -% -% \subsection{The title} -% -% \begin{macro}{\title} -% \begin{macro}{\author} -% \begin{macro}{\date} -% These three macros are provided by \file{latex.dtx} to provide -% information about the title, author(s) and date of the document. -% The information is stored away in internal control sequences. -% It is the task of the |\maketitle| command to use the -% information provided. The definitions of these macros are shown -% here for information. -% \begin{macrocode} -% \newcommand\title[1]{\gdef\@title{#1}} -% \newcommand\author[1]{\gdef\@author{#1}} -% \newcommand\date[1]{\gdef\@date{#1}} -% \end{macrocode} -% The |\date| macro gets today's date by default. -% \begin{macrocode} -% \gdef\@date{\today} -% \end{macrocode} -% \end{macro} -% \end{macro} -% \end{macro} -% -% \begin{macro}{\TitleFont} -% This selects the font to use in the title of the document. -% \begin{macrocode} -\newcommand\TitleFont{\bfseries} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\maketitle} -% The definition of |\maketitle| depends on whether a seperate -% title page is made. This is the default for this document class. -% Note that the title, author and date information is printed in -% capital letters by default. This can be changed by the option -% \Lopt{mctitle}. -% -% When we are making a title page, we locally redefine -% |\footnotesize| and |\footnoterule| to change the appearance of -% the footnotes that are produced by the |\thanks| command. -% \begin{macrocode} -\renewcommand\TitleFont{\rmfamily} -\newcommand\maketitle{% - \begin{titlepage}% - \let\footnotesize\small - \let\footnoterule\relax -% \end{macrocode} -% Footnotes on the titlepage, generated by the use of |\thanks|, -% use symbols in these document classes. -% \begin{macrocode} - \long\def\@makefntext##1{\parindent\z@ - \def\labelitemi{--}\@revlabeltrue - \leavevmode$\m@th^{\@thefnmark}$\kern1em\relax ##1} - \renewcommand\thefootnote{\fnsymbol{footnote}}% -% \end{macrocode} -% We center the entire title vertically; the centering is set off a -% little by adding a |\vskip|. In compatibility mode the pagenumber -% is set to 0 to keep the behaviour of \LaTeX\ 2.09 style files -% \begin{macrocode} - \if@compatibility\setcounter{page}{0}\fi - \null\vfil - \vskip 60\p@ -% \end{macrocode} -% Then we set the title, in a |\LARGE| font; leave a little space -% and set the author(s) in a |\large| font. We do this inside a -% tabular environment to get them in a single column. -% Before the date we leave a little whitespace again. -% \begin{macrocode} - \begin{center}% - \TitleFont - {\LARGE \def\\{\penalty -\@M} - \if@allcaps - \expandafter\uc@nothanks\@title\thanks\relax - \else - \@title - \fi\par}% - \vskip 3em% - {\large - \lineskip .75em \parindent\z@ - \begin{tabular}[t]{c}% - \if@allcaps - \expandafter\uc@authornothanks\@author\and\relax - \else - \@author - \fi - \end{tabular}\par}% - \vskip 1.5em% - {\large - \if@allcaps - \uppercase\expandafter{\@date}% - \else - \@date - \fi\par}% - \end{center}\par -% \end{macrocode} -% Then we call |\@thanks| to print the information that goes into -% the footnote and finish the page. -% \begin{macrocode} - \@thanks - \vfil\null - \end{titlepage}% -% \end{macrocode} -% We reset the \Lcount{footnote} counter, disable |\thanks| and -% |\maketitle| and save some storage space by emptying the internal -% information macros. -% \begin{macrocode} - \setcounter{footnote}{0}% - \let\thanks\relax\let\maketitle\relax - \gdef\@thanks{}\gdef\@author{}\gdef\@title{}} -% \end{macrocode} -% -% We want to have the title, author and date information in -% uppercase, but we have to be very carefull not to put too much -% text in uppercase. The macros that perform the filtering of texts -% that shouldn't be in uppercase were developped with th help of -% Howard Trickey. -% -% \begin{macro}{\uc@nothanks} -% This macro takes all the text up to the first use of |\thanks| -% and passes it to |\uppercase|. The use of |\futurelet| will store -% the token \emph{after} the |\thanks| in |\@tempa|. The macro -% |\u@tx| uses that information to determine what to do next. -% \begin{macrocode} -\def\uc@nothanks#1\thanks{\uppercase{#1}\futurelet\@tempa\uc@tx} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\uc@authornothanks} -% A document can have more than one author. Usually they are -% seperated with |\and|. For each author a footnote --using -% |\thanks| can be present. Therefore this macro takes all the text -% up to the first use of |\and|, thus picking up all the -% information for one author. This is than passsed to -% |\uc@nothanks|, which checks for the presence of |\thanks|. For -% this to work the argument of |\uc@nothanks| has to be delimited -% by |\thanks\relax|. -% \begin{macrocode} -\def\uc@authornothanks#1\and{\uc@nothanks#1\thanks\relax -% \end{macrocode} -% Then we have to check whether the |\and| we ound earlier was put -% in by the user, in which case information for another user will -% follow, or by the call from another macro, in which case the -% |\and| will be followed by a |\relax| token. The |\futurelet| -% contstruct stores the first token \emph{after} the |\and| in -% |\@tempa| to be inspected by |\u@ax|. -% \begin{macrocode} - \futurelet\@tempa\uc@ax} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\uc@ax} -% When |\@tempa| contains a |\relax| token nothing needs to be -% done, when it doesn't we put in a linebreak |\\| the word `and' -% (stored in |\andname| so that this control sequence can be -% redeined for other languages), another linebreak and we call -% |\uc@authornothanks| to continue processing. The |\expandafter| -% lets \TeX\ see the |\fi| first. -% \begin{macrocode} -\def\uc@ax{% - \ifx\@tempa\relax - \else - \\ \andname \\ \expandafter\uc@authornothanks - \fi} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\uc@tx} -% This macro simply checks whether |\@tempa| contains a |\relax| -% token. When it doesn't further processing is performed by -% |\u@ty|. -% \begin{macrocode} -\def\uc@tx{\ifx\@tempa\relax - \else \expandafter\uc@ty \fi} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\uc@ty} -% The macro |\uc@ty| gets executed when the |\thanks| that -% delimited text earlier on in the processing had a real argument. -% In that case it was a |\thanks| put in by the user, \emph{not} by -% these macros. Therefore the argument is now passed to |\thanks| -% and processing continues by calling |\uc@nothanks|. -% \begin{macrocode} -\def\uc@ty#1{\thanks{#1}\uc@nothanks} -% \end{macrocode} -% \end{macro} -% -% When the title is not on a page of its own, the layout of the -% title is a little different. We use symbols to mark the footnotes -% and we have to deal with two column documents. -% -% Therefore we first start a new group to keep changes local. Then -% we redefine |\thefootnote| to use |\fnsymbol|; and change -% |\@makefnmark| so that footnotemarks have zero width (to make the -% centering of the author names look better). We also want raised -% footnotemarkers in the footnotes here. -% \begin{macrocode} -\else -\newcommand\maketitle{\par - \begingroup - \renewcommand\thefootnote{\fnsymbol{footnote}}% - \def\@makefnmark{\hbox to\z@{$\m@th^{\@thefnmark}$\hss}}% - \def\@makefntext{\@xmakefntext{$\m@th^{\@thefnmark}$}}% -% \end{macrocode} -% If this is a twocolumn document we start a new page in twocolumn -% mode, with the title set to the full width of the text. The -% actual printing of the title information is left to -% |\@maketitle|. -% \begin{macrocode} - \if@twocolumn - \ifnum \col@number=\@ne - \@maketitle - \else - \twocolumn[\@maketitle]% - \fi - \else -% \end{macrocode} -% When this is not a twocolumn document we just start a new page, -% prevent floating objects from appearing on the top of this page -% and print the title information. -% \begin{macrocode} - \newpage - \global\@topnum\z@ - \@maketitle - \fi -% \end{macrocode} -% This page gets a \pstyle{plain} layout. We call |\@thanks| to -% produce the footnotes. -% \begin{macrocode} - \thispagestyle{plain}\@thanks -% \end{macrocode} -% Now we can close the group, reset the \Lcount{footnote} counter, -% disable |\thanks|, |\maketitle| and |\@maketitle| and save some -% storage space by emptying the internal information macros. -% \begin{macrocode} - \endgroup - \setcounter{footnote}{0}% - \let\thanks\relax - \let\maketitle\relax\let\@maketitle\relax - \gdef\@thanks{}\gdef\@author{}\gdef\@title{}} -% \end{macrocode} -% -% \begin{macro}{\@maketitle} -% This macro takes care of formatting the title information when we -% have no seperate title page. -% -% We always start a new page, leave some white space and center the -% information. The title is set in a |\LARGE| font, the author -% names and the in a |\large| font. -% \begin{macrocode} -\def\@maketitle{% - \newpage - \null - \vskip 2em% -%<+type3>\if@titlecentered - \begin{center}% - {\LARGE \TitleFont \@title \par}% - \vskip 1.5em% - {\large \TitleFont - \lineskip .5em% - \begin{tabular}[t]{c}% - \@author - \end{tabular}\par}% - \vskip 1em% - {\large \TitleFont \@date}% - \end{center}% -%<*type3> - \else - {\LARGE \TitleFont \head@style \@title \par} \vskip 1.5em - {\large \TitleFont \lineskip .5em \tabcolsep\z@ - \def\and{%%% \begin{tabular} has already started - \end{tabular}\hskip 1em plus .17fil - \begin{tabular}[t]{l}}%% \end{tabular} will come - \begin{tabular}[t]{l}\@author\end{tabular}\par} - \vskip 1em {\large \TitleFont \@date} - \fi -% - \par - \vskip 1.5em} -\fi -% \end{macrocode} -% \end{macro} -% \end{macro} -% -% \subsection{Chapters and Sections} -% -% \subsubsection{Building blocks} -% The definitions in this part of the class file make use of two -% macros, |\@startsection| and |\secdef|, which are defined by -% \file{latex.dtx}. To understand what is going on here, we -% describe their syntax. -% -% The macro |\@startsection| has 6 required arguments, optionally -% followed by a $*$, an optional argument and a required argument: -% -% |\@startsection|\meta{name}\meta{level}\meta{indent}^^A -% \meta{beforeskip}\meta{afterskip}\meta{style} -% optional *\\ -% \null\hphantom{\bslash @startsection}^^A -% |[|\meta{altheading}|]|\meta{heading} -% -% It is a generic command to start a section, the arguments have -% the following meaning: -% -% \begin{description} -% \item[\meta{name}] The name of the user level command, e.g., -% `section'. -% \item[\meta{level}] A number, denoting the depth of the section -% -- e.g., chapter=1, section = 2, etc. A section number -% will be printed if and only if \meta{level} $<=$ the value -% of the \Lcount{secnumdepth} counter. -% \item[\meta{indent}] The indentation of the heading from the left -% margin -% \item[\meta{beforeskip}] The absolute value of this argument -% gives the skip to leave above the heading. If it is -% negative, then the paragraph indent of the text following -% the heading is suppressed. -% \item[\meta{afterskip}] If positive, this gives the skip to leave -% below the heading, else it gives the skip to leave to the -% right of a run-in heading. -% \item[\meta{style}] Commands to set the style of the heading. -% \item[$*$] When this is missing the heading is numbered and the -% corresponding counter is incremented. -% \item[\meta{altheading}] Gives an alternative heading to use in -% the table of contents and in the running heads. This should -% be present when the $*$ form is used. -% \item[\meta{heading}] The heading of the new section. -% \end{description} -% A sectioning command is normally defined to |\@startsection| and -% its first six arguments. -% -% The macro |\secdef| can be used when a sectioning command is -% defined without using |\@startsection|. It has two arguments: -% -% |\secdef|\meta{unstarcmds}\meta{starcmds} -% -% \begin{description} -% \item[\meta{unstarcmds}] Used for the normal form of the -% sectioning command. -% \item[\meta{starcmds}] Used for the $*$-form of the -% sectioning command. -% \end{description} -% -% You can use |\secdef| as follows: -% \begin{verbatim} -% \def\chapter { ... \secdef \CMDA \CMDB } -% \def\CMDA [#1]#2{ ... } % Command to define -% % \chapter[...]{...} -% \def\CMDB #1{ ... } % Command to define -% % \chapter*{...} -% \end{verbatim} -% -% \begin{macro}{\head@style} -% In the definition of chapter and section commands a number of -% settings frequently occur. Therefore we store them in a control -% sequence. -% -% Section headings are to be set extremely raggedright, with no -% hyphenations, not even at explicit hyphens. -% -% \begin{macrocode} -\newcommand\head@style{% - \interlinepenalty \@M - \hyphenpenalty=\@M \exhyphenpenalty=\@M - \rightskip=0cm plus .7\hsize\relax} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\@sect} -% The definition of this macro from \file{latex.dtx} needs to be -% repeated here because we want to modify its behaviour with -% respect to: -% \begin{enumerate} -% \item the width of the number, which is fixed; -% \item checking the value of |\unitindent|; -% \item formatting the section title ragged right; -% \item changing the argument of |\contentsline|. -% \end{enumerate} -% \begin{macrocode} -\def\@sect#1#2#3#4#5#6[#7]#8{\ifnum #2>\c@secnumdepth - \let\@svsec\@empty\else - \refstepcounter{#1}% -% \end{macrocode} -% The following code (within the group) checks the value of -% |\unitindent|. If the sectionnumber is wider than |\unitindent| -% its value is adapted and a flag is set to rememeber to store the -% new value in the \file{.aux}-file. -% \begin{macrocode} - \begingroup - \setbox\@tempboxa=\hbox{#6\relax - \csname the#1\endcsname - \hskip.5em} - \ifdim\wd\@tempboxa>\unitindent - \global\unitindent=\wd\@tempboxa - \@indentset - \fi - \endgroup - \let\@@protect\protect - \def\protect{\noexpand\protect\noexpand}% - \edef\@svsec{\@seccntformat{#1}}% - \let\protect\@@protect\fi - \@tempskipa #5\relax - \ifdim \@tempskipa>\z@ - \begingroup #6\relax - \@hangfrom{\hskip #3\relax\@svsec}{\head@style #8\par}% - \endgroup - \csname #1mark\endcsname{#7}% - \addcontentsline{toc}{#1}{% - \ifnum #2>\c@secnumdepth - \else - \protect\numberline{\csname the#1\endcsname}% - \fi - \toc@font#2 #7}% - \else - \def\@svsechd{#6\hskip #3\relax - \@svsec #8\csname #1mark\endcsname{#7}% - \addcontentsline{toc}{#1}{% - \ifnum #2>\c@secnumdepth - \else - \protect\numberline{\csname the#1\endcsname}% - \fi - \toc@font#2 #7}}% - \fi - \@xsect{#5}} -% \end{macrocode} -% This macro was introduced in \LaTeXe, its definition is changed -% here to get the fixed with of the section number. -% \begin{macrocode} -\def\@seccntformat#1{% - \hbox to \unitindent{\csname the#1\endcsname \hfil}% - } -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\@ssect} -% Similar changes need to be made to the definition of |\@ssect|, -% which is used in `starred' sections. -% \begin{macrocode} -\def\@ssect#1#2#3#4#5{\@tempskipa #3\relax - \ifdim \@tempskipa>\z@ - \begingroup #4\relax - \@hangfrom{\hskip #1}{\head@style #5\par}\endgroup - \else \def\@svsechd{#4\hskip #1\relax #5}\fi - \@xsect{#3}} -% \end{macrocode} -% \end{macro} -% -% \subsubsection{Mark commands} -% -% \begin{macro}{\chaptermark} -% \begin{macro}{\sectionmark} -% \begin{macro}{\subsectionmark} -% \begin{macro}{\subsubsectionmark} -% \begin{macro}{\paragraphmark} -% \begin{macro}{\subparagraphmark} -% Default initializations of |\...mark| commands. These commands -% are used in the definition of the page styles (see -% section~\ref{sec:pagestyle}) Most of them are already defined by -% \file{latex.ltx}, so they are only shown here. -% -% \begin{macrocode} -\newcommand\chaptermark[1]{} -% \newcommand\sectionmark[1]{} -% \newcommand\subsectionmark[1]{} -% \newcommand\subsubsectionmark[1]{} -% \newcommand\paragraphmark[1]{} -% \newcommand\subparagraphmark[1]{} -% \end{macrocode} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% -% \subsubsection{Define Counters} -% -% \begin{macro}{\c@secnumdepth} -% The value of the counter \Lcount{secnumdepth} gives the depth of -% the highest-level sectioning command that is to produce section -% numbers. -% \begin{macrocode} -\setcounter{secnumdepth}{2} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\c@part} -% \begin{macro}{\c@chapter} -% \begin{macro}{\c@section} -% \begin{macro}{\c@subsection} -% \begin{macro}{\c@subsubsection} -% \begin{macro}{\c@paragraph} -% \begin{macro}{\c@subparagraph} -% These counters are used for the section numbers. The macro\\ -% |\newcounter{|\meta{newctr}|}[|\meta{oldctr}|]|\\ -% defines \meta{newctr} to be a counter, which is reset to zero when -% counter \meta{oldctr} is stepped. Counter \meta{oldctr} must -% already be defined. -% -% \begin{macrocode} -\newcounter {part} -\newcounter {chapter} -\newcounter {section}[chapter] -\newcounter {subsection}[section] -\newcounter {subsubsection}[subsection] -\newcounter {paragraph}[subsubsection] -\newcounter {subparagraph}[paragraph] -% \end{macrocode} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% -% \begin{macro}{\thepart} -% \begin{macro}{\thechapter} -% \begin{macro}{\thesection} -% \begin{macro}{\thesubsection} -% \begin{macro}{\thesubsubsection} -% \begin{macro}{\theparagraph} -% \begin{macro}{\thesubparagraph} -% For any counter \Lcount{CTR}, |\theCTR| is a macro that defines -% the printed version of counter \Lcount{CTR}. It is defined in -% terms of the following macros: -% -% |\arabic{|\Lcount{COUNTER}|}| prints the value of -% \Lcount{COUNTER} as an arabic numeral. -% -% |\roman{|\Lcount{COUNTER}|}| prints the value of -% \Lcount{COUNTER} as a lowercase roman numberal. -% -% |\Roman{|\Lcount{COUNTER}|}| prints the value of -% \Lcount{COUNTER} as an uppercase roman numberal. -% -% |\alph{|\Lcount{COUNTER}|}| prints the value of \Lcount{COUNTER} -% as a lowercase letter: $1 =$~a, $2 =$~ b, etc. -% -% |\Alph{|\Lcount{COUNTER}|}| prints the value of \Lcount{COUNTER} -% as an uppercase letter: $1 =$~A, $2 =$~B, etc. -% -% \begin{macrocode} -\renewcommand\thepart {\Roman{part}} -\renewcommand\thechapter {\arabic{chapter}} -\renewcommand\thesection {\thechapter.\arabic{section}} -\renewcommand\thesubsection {\thesection.\arabic{subsection}} -\renewcommand\thesubsubsection {\thesubsection .\arabic{subsubsection}} -\renewcommand\theparagraph {\thesubsubsection.\arabic{paragraph}} -\renewcommand\thesubparagraph {\theparagraph.\arabic{subparagraph}} -% \end{macrocode} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% -% \begin{macro}{\@chapapp} -% |\@chapapp| is initially defined to be `|\chaptername|'. The -% |\appendix| command redefines it to be `|\appendixname|'. -% -% \begin{macrocode} -\newcommand\@chapapp{\chaptername} -% \end{macrocode} -% \end{macro} -% -% \subsubsection{Parts} -% -% \begin{macro}{\part} -% The command to start a new part of our document. -% -% We start a new (righthand) page and use the \pstyle{empty}. -% \begin{macrocode} -\newcommand\part{\cleardoublepage - \thispagestyle{empty}% -% \end{macrocode} -% When we are making a two column document, this will be a one -% column page. We use |@tempswa| to remember to switch back to two -% columns. -% \begin{macrocode} - \if@twocolumn - \onecolumn - \@tempswatrue - \else - \@tempswafalse - \fi -% \end{macrocode} -% We need an empty box to prevent the fil glue from disappearing. -% \begin{macrocode} - \hbox{}\vfil -% \end{macrocode} -% Here we use |\secdef| to indicate wwhich commands to use to make -% the actual heading. -% \begin{macrocode} - \secdef\@part\@spart} -% \end{macrocode} -% -% \begin{macro}{\@part} -% This macro does the actual formatting of the title of the part. -% -% \begin{macro}{\PartFont} -% The font used to typeset the part is stored in this maro. -% \begin{macrocode} -\newcommand\PartFont{\bfseries} -% \end{macrocode} -% \end{macro} -% -% When \Lcount{secnumdepth} is larger than $-2$ for this document -% class, we have a numbered part, otherwise it is unnumbered. -% \begin{macrocode} -\def\@part[#1]#2{% - \ifnum \c@secnumdepth >-2\relax - \refstepcounter{part}% - \addcontentsline{toc}{part}{\thepart\hspace{1em}\toc@case{#1}}% - \else - \addcontentsline{toc}{part}{\toc@case{#1}}% - \fi -% \end{macrocode} -% We empty the mark registers and center the title on the page. -% Also we prevent breaking between lines and reset the font. -% \begin{macrocode} - \markboth{}{} - {\centering - \interlinepenalty \@M - \reset@font -% \end{macrocode} -% When this is a numbered part we have to print the number. We have -% to expand |\partname| before |\uppercase| is called, therefore we -% use a temporary control sequence that, when called will execute -% |\uppercase| on the contents of |\partname|. -% \begin{macrocode} - \ifnum \c@secnumdepth >-2\relax - \Large\PartFont - \edef\@tempa{\noexpand\uppercase{\partname}}\@tempa~\thepart - \par -% \end{macrocode} -% We leave some space before we print the title and leave the -% finishing up to |\@endpart|. -% \begin{macrocode} - \vskip 20\p@ - \fi - \Large \PartFont \uppercase{#2}\par}% - \@endpart} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\@spart} -% This macro does the actual formatting of the title of the part -% when the star form of the user command was used. In this case we -% {\em never} print a number. Otherwise the formatting is the same. -% -% \begin{macrocode} -\def\@spart#1{% - {\centering - \interlinepenalty \@M - \reset@font - \Large \PartFont #1\par}% - \@endpart} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\@endpart} -% This macro finishes the part page, for both |\@part| and -% |\@spart|. -% -% First we fill the current page. -% \begin{macrocode} -\def\@endpart{\vfil\newpage -% \end{macrocode} -% Then, when we are in twosided mode, we produce a completely blank -% page. -% \begin{macrocode} - \if@twoside - \hbox{}% - \thispagestyle{empty}% - \newpage - \fi -% \end{macrocode} -% When this was a two column document we have to switch back to two -% column mode. -% \begin{macrocode} - \if@tempswa - \twocolumn - \fi} -% \end{macrocode} -% \end{macro} -% \end{macro} -% -% \subsubsection{Chapters} -% -% \begin{macro}{\chapter} -% A chapter should always start on a new page therefore we start by -% calling |\clearpage| and setting the pagestyle for this page to -% \pstyle{plain}. -% \begin{macrocode} -\newcommand\chapter{\if@openright\cleardoublepage\else\clearpage\fi - \thispagestyle{plain}% -% \end{macrocode} -% Then we prevent floats from appearing at the top of this page -% because it looks weird to see a floating object above a chapter -% title. -% \begin{macrocode} - \global\@topnum\z@ -% \end{macrocode} -% Then we suppress the indentation of the first paragraph by -% setting the switch |\@afterindent| to |false|. We use |\secdef| -% to specify the macros to use for actually setting the chapter -% title. -% \begin{macrocode} - \@afterindentfalse - \secdef\@chapter\@schapter} -% \end{macrocode} -% -% \begin{macro}{\@chapter} -% This macro is called when we have a numbered chapter. When -% \Lcount{secnumdepth} is larger than $-1$ we display the chapter -% number. We also inform the user that a new chapter is about to be -% typeset by writing a message to the terminal. -% \begin{macrocode} -\def\@chapter[#1]#2{% - \ifnum \c@secnumdepth >\m@ne - \refstepcounter{chapter}% - \typeout{\@chapapp\space\thechapter.}% - \addcontentsline{toc}{chapter}% - {\protect\numberline{\thechapter}\toc@font0 #1}% - \else - \addcontentsline{toc}{chapter}{\toc@font0 #1}% - \fi -% \end{macrocode} -% After having written an entry to the table of contents we store -% the (alternative) title of this chapter with |\chaptermark| and -% add some white space to the lists of figures and tables. -% \begin{macrocode} - \chaptermark{#1}% - \addtocontents{lof}{\protect\addvspace{10\p@}}% - \addtocontents{lot}{\protect\addvspace{10\p@}}% -% \end{macrocode} -% Then we call upon |\@makechapterhead| to format the actual -% chapter title. We have to do this in a special way when we are in -% twocolumn mode in order to have the chapter title use the entire -% |\textwidth|. In one column mode we call |\@afterheading| which -% takes care of suppressing the indentation. -% \begin{macrocode} - \if@twocolumn - \@topnewpage[\@makechapterhead{#2}]% - \else - \@makechapterhead{#2}% - \@afterheading - \fi} -% \end{macrocode} -% -% \begin{macro}{\ChapFont} -% The font used to typeset the chapters is stored in this maro. -% \begin{macrocode} -\newcommand\ChapFont{\bfseries} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\@makechapterhead} -% The macro above uses |\@makechapterhead|\meta{text} to format the -% heading of the chapter. -% -% We begin by leaving some white space. The we open a group in -% which we have a paragraph indent of 0pt, and in which we have the -% text set ragged right. We also reset the font. -% \begin{macrocode} -\def\@makechapterhead#1{% - \vspace*{50\p@ \@plus 5\p@}% - {\setlength\parindent{\z@}% - \setlength\parskip {\z@}% - \head@style \reset@font -% \end{macrocode} -% Then we check whether the number of the chapter has to be printed. -% If so we leave some whitespace between the chapternumber and its -% title. -% \begin{macrocode} - \ifnum \c@secnumdepth >\m@ne - \Large\ChapFont \@chapapp{} \thechapter - \par - \vskip 20\p@ - \fi -% \end{macrocode} -% Now we set the title in a large bold font. We prevent a pagebreak -% at this point and leave some whitespace before the text begins. -% \begin{macrocode} - \Large \ChapFont #1\par - \nobreak - \vskip 40\p@ - }} -% \end{macrocode} -% \end{macro} -% \end{macro} -% -% \begin{macro}{\@schapter} -% This macro is called when we have an unnumbered chapter. It is -% much simpler than |\@chapter| because it only needs to typeset -% the chapter title. -% \begin{macrocode} -\def\@schapter#1{\if@twocolumn - \@topnewpage[\@makeschapterhead{#1}]% - \else - \@makeschapterhead{#1}% - \@afterheading - \fi} -% \end{macrocode} -% -% \begin{macro}{\@makeschapterhead} -% The macro above uses |\@makeschapterhead|\meta{text}to format -% the heading of the chapter. It is similar to |\@makechapterhead| -% except that it never has to print a chapter number. -% -% \begin{macrocode} -\def\@makeschapterhead#1{% - \vspace*{50\p@\@plus 5\p@}% - {\setlength\parindent{\z@}% - \setlength\parskip{\z@}% - \head@style - \reset@font - \Large \ChapFont #1\par - \nobreak - \vskip 40\p@ - }} -% \end{macrocode} -% \end{macro} -% \end{macro} -% \end{macro} -% -% -% \subsubsection{Lower level headings} -% -% These commands all make use of |\@startsection|. -% \begin{macro}{\section} -% This gives a normal heading with white space above the heading -% (the whitespace below the heading will be generated by the -% |\parskip| that is inserted at the start of the first paragraph), -% the title set in |\large\bfseries|, and no indentation on the -% first paragraph. -% \begin{macrocode} -\newcommand\section{% - \@startsection {section}{1}{\z@}% - {-2\baselineskip\@plus -1\baselineskip \@minus -.5\baselineskip}% -%<+type1> {.5\baselineskip}% -%<+type3> {.01\baselineskip}% - {\reset@font\large\SectFont}} -% \end{macrocode} -% -% \begin{macro}{\SectFont} -% The font used to typeset the sections is stored in this maro. -% \begin{macrocode} -\newcommand\SectFont{\bfseries} -% \end{macrocode} -% \end{macro} -% \end{macro} -% -% \begin{macro}{\subsection} -% This gives a normal heading with white space above the heading, -% the title set in |\normalsize\bfseries|, and no indentation on -% the first paragraph. -% \begin{macrocode} -\newcommand\subsection{% - \@startsection{subsection}{2}{\z@}% - {-1\baselineskip\@plus -.5\baselineskip \@minus -.25\baselineskip}% -%<+type1> {.25\baselineskip}% -%<+type3> {.01\baselineskip}% - {\reset@font\normalsize\SSectFont}} -% \end{macrocode} -% -% \begin{macro}{\SSectFont} -% The font used to typeset the subsections is stored in this maro. -% \begin{macrocode} -\newcommand\SSectFont{\bfseries} -% \end{macrocode} -% \end{macro} -% \end{macro} -% -% \begin{macro}{\subsubsection} -% This gives a normal heading with white space above the heading, -% the title set in |\normalsize\tm|, and no indentation on the -% first paragraph. -% \begin{macrocode} -\newcommand\subsubsection{% - \@startsection{subsubsection}{3}{\z@}% - {-1\baselineskip plus -.5\baselineskip minus -.25\baselineskip}% -%<+type1> {.25\baselineskip}% -%<+type3> {.01\baselineskip}% - {\reset@font\normalsize\SSSectFont}} -% \end{macrocode} -% -% \begin{macro}{\SSSectFont} -% The font used to typeset the subsubsections is stored in this maro. -% \begin{macrocode} -\newcommand\SSSectFont{\rmfamily} -\newcommand\SSSectFont{\slshape} -% \end{macrocode} -% \end{macro} -% \end{macro} -% -% \begin{macro}{\paragraph} -% This gives a run-in heading with white space above and to the -% right of the heading, the title set in |\normalsize\slshape|. -% \begin{macrocode} -\newcommand\paragraph{% - \@startsection{paragraph}{4}{\z@}% - {3.25ex \@plus1ex \@minus.2ex}% - {-1em}% - {\reset@font\normalsize\ParaFont}} -% \end{macrocode} -% -% \begin{macro}{\ParaFont} -% The font used to typeset the paragraphs is stored in this maro. -% \begin{macrocode} -\newcommand\ParaFont{\slshape} -% \end{macrocode} -% \end{macro} -% \end{macro} -% -% \begin{macro}{\subparagraph} -% This gives an indented run-in heading with white space above and -% to the right of the heading, the title set in -% |\normalsize\slshape|. -% \begin{macrocode} -\newcommand\subparagraph{% - \@startsection{subparagraph}{5}{\parindent}% - {3.25ex \@plus1ex \@minus .2ex}% - {-1em}% - {\reset@font\normalsize\SParaFont}} -% \end{macrocode} -% -% \begin{macro}{\SParaFont} -% The font used to typeset the subparagraphs is stored in this maro. -% \begin{macrocode} -\newcommand\SParaFont{\slshape} -% \end{macrocode} -% \end{macro} -% \end{macro} -% -% \begin{macro}{\Headingfonts} -% To change the fonts that are used to typeset the title,part, -% chapter and section headings this macro can be used. -% \begin{macrocode} -\newcommand\HeadingFonts[8]{% - \renewcommand\TitleFont{#1}% - \renewcommand\PartFont{#2}% - \renewcommand\ChapFont{#3}% - \renewcommand\SectFont{#4}% - \renewcommand\SSectFont{#5}% - \renewcommand\SSSectFont{#6}% - \renewcommand\ParaFont{#7}% - \renewcommand\SParaFont{#8}} -% \end{macrocode} -% \end{macro} -% -% \subsection{Lists} -% -% \subsubsection{General List Parameters} -% -% The following commands are used to set the default values for the list -% environment's parameters. See the \LaTeX{} manual for an explanation -% of the meanings of the parameters. Defaults for the list -% environment are set as follows. First, |\rightmargin|, -% |\listparindent| and |\itemindent| are set to 0pt. Then, for a Kth -% level list, the command |\@listK| is called, where `K' denotes `i', -% '`i', ... , `vi'. (I.e., |\@listiii| is called for a third-level -% list.) By convention, |\@listK| should set |\leftmargin| to -% |\leftmarginK|. -% -% \begin{macro}{\leftmargin} -% \begin{macro}{\leftmargini} -% \begin{macro}{\leftmarginii} -% \begin{macro}{\leftmarginiii} -% \begin{macro}{\leftmarginiv} -% \begin{macro}{\leftmarginv} -% \begin{macro}{\leftmarginvi} -% For efficiency, level-one list's values are defined at top level, and -% |\@listi| is defined to set only |\leftmargin|. -% -% \begin{macrocode} -\setlength\leftmargini {\unitindent} -\setlength\leftmarginii {\othermargin} -\setlength\leftmarginiii{\othermargin} -\setlength\leftmarginiv {\othermargin} -\setlength\leftmarginv {\othermargin} -\setlength\leftmarginvi {1em} -% \end{macrocode} -% Here we set the top level leftmargin. -% \begin{macrocode} -\setlength\leftmargin {\leftmargini} -% \end{macrocode} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% -% \begin{macro}{\labelsep} -% \begin{macro}{\labelwidth} -% |\labelsep| is the distance between the label and the text of an -% item; |\labelwidth| is the width of the label. -% \begin{macrocode} -\setlength \labelsep {5\p@} -\setlength \labelwidth{\leftmargini} -\addtolength\labelwidth{-\labelsep} -% \end{macrocode} -% \end{macro} -% \end{macro} -% -% \begin{macro}{\partopsep} -% When the user leaves a blank line before the environment an extra -% vertical space of |\partopsep| is inserted, in addition to -% |\parskip| and |\topsep|. -% \begin{macrocode} -\setlength\partopsep{\z@} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\topsep} -% Extra vertical space, in addition to |\parskip|, added above and -% below list and paragraphing environments. -% \begin{macrocode} -\setlength\topsep{\z@} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\@beginparpenalty} -% \begin{macro}{\@endparpenalty} -% These penalties are inserted before and after a list or paragraph -% environment. They are set to a bonus value to encourage page -% breaking at these points. -% \begin{macro}{\@itempenalty} -% This penalty is inserted between list items. -% \begin{macrocode} -\@beginparpenalty -\@lowpenalty -\@endparpenalty -\@lowpenalty -\@itempenalty -\@lowpenalty -% \end{macrocode} -% \end{macro} -% \end{macro} -% \end{macro} -% -% \begin{macro}{\@listI} -% \begin{macro}{\@listi} -% |\@listI| defines top level and |\@listi| values of -% |\leftmargin|, |\parsep|, |\topsep|, and |\itemsep| -% -% \begin{macrocode} -\def\@listI{% - \leftmargin\unitindent - \labelsep.5em% - \labelwidth\leftmargin - \advance\labelwidth-\labelsep - \parsep \z@ -%<-type3> \topsep 0\p@ \@plus\p@ -%<+type3> \topsep -.5\parskip \@plus\p@ - \itemsep 0\p@ \@plus1\p@} -\let\@listi\@listI -% \end{macrocode} -% We have to initialise these parameters. -% \begin{macrocode} -\@listi -% \end{macrocode} -% \end{macro} -% \end{macro} -% -% \begin{macro}{\@listii} -% \begin{macro}{\@listiii} -% \begin{macro}{\@listiv} -% \begin{macro}{\@listv} -% \begin{macro}{\@listvi} -% Here are the same macros for the higher level lists. -% \begin{macrocode} -\def\@listii {\leftmargin\leftmarginii - \labelsep .5em% - \labelwidth\leftmarginii - \advance\labelwidth-\labelsep -%<-type3> \topsep 0\p@ \@plus\p@ -%<+type3> \topsep -.5\parskip\@plus\p@ - \parsep \z@ - \itemsep \z@ \@plus\p@} -\def\@listiii{\leftmargin\leftmarginiii - \labelsep .5em% - \labelwidth\leftmarginiii - \advance\labelwidth-\labelsep -%<-type3> \topsep 0\p@ \@plus\p@ -%<+type3> \topsep -.5\parskip\@plus\p@ - \parsep \z@ - \partopsep \z@ \@plus\p@ - \itemsep \z@ \@plus\p@} -\def\@listiv {\leftmargin\leftmarginiv - \labelsep .5em% - \labelwidth\leftmarginiv% - \advance\labelwidth-\labelsep -%<-type3> \topsep 0\p@ \@plus\p@ -%<+type3> \topsep -.5\parskip\@plus\p@ - \parsep \z@ - \itemsep \z@ \@plus\p@} -\def\@listv {\leftmargin\leftmarginv - \labelsep .5em% - \labelwidth\leftmarginv - \advance\labelwidth-\labelsep% -%<-type3> \topsep 0\p@ \@plus\p@ -%<+type3> \topsep -.5\parskip\@plus\p@ - \parsep \z@ - \itemsep \z@ \@plus\p@} -\def\@listvi {\leftmargin\leftmarginvi - \labelsep .5em - \labelwidth\leftmarginvi - \advance\labelwidth{-\labelsep}% -%<-type3> \topsep 0\p@ \@plus\p@ -%<+type3> \topsep -.5\parskip\@plus\p@ - \parsep \z@ - \itemsep \z@ \@plus\p@} -% \end{macrocode} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% -% \subsubsection{Enumerate} -% -% The enumerate environment uses four counters: \Lcount{enumi}, -% \Lcount{enumii}, \Lcount{enumiii} and \Lcount{enumiv}, where -% \Lcount{enumN} controls the numbering of the Nth level -% enumeration. -% -% \begin{macro}{\theenumi} -% \begin{macro}{\theenumii} -% \begin{macro}{\theenumiii} -% \begin{macro}{\theenumiv} -% The counters are already defined in \file{latex.dtx}, but their -% representation is changed here. -% -% \begin{macrocode} -\renewcommand\theenumi{\arabic{enumi}} -\renewcommand\theenumii{\alph{enumii}} -\renewcommand\theenumiii{\roman{enumiii}} -\renewcommand\theenumiv{\Alph{enumiv}} -% \end{macrocode} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% -% \begin{macro}{\labelenumi} -% \begin{macro}{\labelenumii} -% \begin{macro}{\labelenumiii} -% \begin{macro}{\labelenumiv} -% The label for each item is generated by the commands\\ -% |\labelenumi| ... |\labelenumiv|. -% \begin{macrocode} -\newcommand\labelenumi{\theenumi.} -\newcommand\labelenumii{(\theenumii)} -\newcommand\labelenumiii{\theenumiii.} -\newcommand\labelenumiv{\theenumiv.} -% \end{macrocode} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% -% \begin{macro}{\p@enumii} -% \begin{macro}{\p@enumiii} -% \begin{macro}{\p@enumiv} -% The expansion of |\p@enumN||\theenumN| defines the output of a -% |\ref| command when referencing an item of the Nth level of an -% enumerated list. -% \begin{macrocode} -\renewcommand\p@enumii{\theenumi} -\renewcommand\p@enumiii{\theenumi(\theenumii)} -\renewcommand\p@enumiv{\p@enumiii\theenumiii} -% \end{macrocode} -% \end{macro} -% \end{macro} -% \end{macro} -% -% -% \begin{environment}{enumerate} -% We want to have different label positioning on different levels of -% list. To acheive this we have to redefine the \Lenv{enumerate} -% environment. -% -% \begin{macrocode} -\renewenvironment{enumerate}{% - \ifnum \@enumdepth >3 - \@toodeep - \else - \advance\@enumdepth \@ne - \edef\@enumctr{enum\romannumeral\the\@enumdepth}% - \list{\csname label\@enumctr\endcsname} - {\usecounter{\@enumctr}% -%<+type1> \ifnum \@listdepth=1 - \if@revlabel - \def\makelabel##1{\hskip .5\unitindent{##1\hfil}}% - \else -%<-type3> \def\makelabel##1{\hfil##1} -%<+type3> \def\makelabel##1{##1\hfil} - \fi -%<*type1> - \else - \def\makelabel##1{##1\hfil}% -% - \fi - }% - \fi} -% \end{macrocode} -% We try to suppress spaces after these list constructs. -% \begin{macrocode} - {\global\@ignoretrue \endlist} -% \end{macrocode} -% \end{environment} -% -% \subsubsection{Itemize} -% -% \begin{macro}{\labelitemi} -% \begin{macro}{\labelitemii} -% \begin{macro}{\labelitemiii} -% \begin{macro}{\labelitemiv} -% Itemization is controlled by four commands: |\labelitemi|, -% |\labelitemii|, |\labelitemiii|, and |\labelitemiv|, which define -% the labels of thevarious itemization levels: the symbols used are -% bullet, bold en-dash, asterisk and centred dot. -% -% \begin{macrocode} -\newcommand\labelitemi{$\m@th\bullet$} -\newcommand\labelitemii{\bfseries --} -\newcommand\labelitemiii{$\m@th\ast$} -\newcommand\labelitemiv{$\m@th\cdot$} -% \end{macrocode} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% -% \begin{environment}{itemize} -% We want to have differen label positioning on different levels of -% list. To acheive this we have to redefine the \Lenv{itemize} -% environment. -% \begin{macrocode} -\renewenvironment{itemize}{% - \ifnum \@itemdepth >3 - \@toodeep - \else - \advance\@itemdepth \@ne - \edef\@itemitem{labelitem\romannumeral\the\@itemdepth}% - \list{\csname\@itemitem\endcsname}% - {% -%<+type1> \ifnum \@listdepth=1\relax - \if@revlabel - \def\makelabel##1{\hskip .5\unitindent{##1\hfil}}\else -%<+type1> \def\makelabel##1{\hfil##1} -%<+type3> \def\makelabel##1{##1\hfil} - \fi -%<*type1> - \else - \def\makelabel##1{##1\hfil} - \fi -% - }% - \fi} -% \end{macrocode} -% We try to suppress spaces after these list constructs. -% \begin{macrocode} - {\global\@ignoretrue \endlist} -% \end{macrocode} -% \end{environment} -% -% \subsubsection{Description} -% -% \begin{environment}{description} -% The description environment is defined here -- while the itemize -% and enumerate environments are defined in \file{latex.dtx}. -% -% \begin{macrocode} -\newenvironment{description} - {\list{}{\labelwidth\z@ \itemindent-\leftmargin - \let\makelabel\descriptionlabel}} - {\endlist} -% \end{macrocode} -% \end{environment} -% -% \begin{macro}{\descriptionlabel} -% To change the formatting of the label, you must redefine -% |\descriptionlabel|. -% -% \begin{macrocode} -\newcommand\descriptionlabel[1]{\hspace\labelsep \bfseries #1} -% \end{macrocode} -% \end{macro} -% -% \subsection{Adapting existing environments} -% -% Because we globally set |\topsep| to zero, we need to modify the -% definitions of a number of environments slightly to get a litle -% whitespace around them. -% -% \begin{environment}{center} -% Add a litle surrounding whitespace. -% \begin{macrocode} -%<*type1> -\def\center - {\topsep=.25\baselineskip \@plus .1\baselineskip - \@minus .1\baselineskip - \trivlist \centering\item[]} -\let\endcenter\endtrivlist -% \end{macrocode} -% \end{environment} -% -% \begin{environment}{flushleft} -% Add a litle surrounding whitespace. -% \begin{macrocode} -\def\flushleft - {\topsep=.25\baselineskip \@plus .1\baselineskip - \@minus .1\baselineskip - \trivlist \raggedright\item[]} -\let\endflushleft=\endtrivlist -% \end{macrocode} -% \end{environment} -% -% \begin{environment}{flushright} -% Add a litle surrounding whitespace. -% \begin{macrocode} -\def\flushright - {\topsep=.25\baselineskip \@plus .1\baselineskip - \@minus .1\baselineskip - \trivlist \raggedleft\item[]} -\let\endflushright=\endtrivlist -% -% \end{macrocode} -% \end{environment} -% -% \begin{environment}{verbatim} -% In \Lenv{verbatim} we add a little surrounding whitespace, -% --which for \file{rapport3} is negative to -% compensate for the positive |\parskip|-- but also an indent for -% the \file{rapport1} document class. -% \begin{macrocode} -\def\verbatim{% -%<*type1> - \topsep=.25\baselineskip \@plus .1\baselineskip - \@minus .1\baselineskip - \@verbatim - \leftskip\unitindent -% -%<*type3> - \topsep=-.5\parskip - \@verbatim -% - \frenchspacing\@vobeyspaces \@xverbatim} -%<+type1>\def\endverbatim{\if@newlist \leavevmode\fi\endtrivlist} -% \end{macrocode} -% \end{environment} -% -% \subsection{Defining new environments} -% -% \subsubsection{Abstract} -% -% \begin{environment}{abstract} -% When we are producing a separate titlepage we also put the -% abstract on a page of its own. It will be centred vertically on -% the page. -% -% \begin{macrocode} -\if@titlepage - \newenvironment{abstract}{% - \titlepage - \null\vfil - \hbox{\SectFont \abstractname} - \noindent\ignorespaces} - {\par\vfil\null\endtitlepage} -% \end{macrocode} -% When we are not making a seperate titlepagewe have to check if we -% are in twocolumn mode. In that case the abstract is set as a -% |\section*|, otherwise the abstract is typeset flushleft, an -% amount |\unitindent| smaller as the normal text. -% \begin{macrocode} -\else - \newenvironment{abstract}{% - \if@twocolumn - \section*{\abstractname}% - \else - \small - \bgroup\rightskip=\unitindent - \hbox{\SectFont \abstractname}% - \noindent\ignorespaces -% \end{macrocode} - \fi} -% \end{macrocode} -% Which implies that the definition of |\end{abstract}| is also -% different. -% \begin{macrocode} - {\if@twocolumn\else\par\egroup\fi} -\fi -% \end{macrocode} -% \end{environment} -% -% \subsubsection{Verse} -% -% \begin{environment}{verse} -% The verse environment is defined by making clever use of the -% list environment's parameters. The user types |\\| to end a line. -% This is implemented by |\let|'ing |\\| equal |\@centercr|. -% -% \begin{macrocode} -\newenvironment{verse} - {\let\\=\@centercr - \list{}{\itemsep\z@ - \itemindent-1.5em% - \listparindent\itemindent - \rightmargin\leftmargin - \advance\leftmargin1.5em}% - \item[]} - {\endlist} -% \end{macrocode} -% \end{environment} -% -% \subsubsection{Quotation} -% -% \begin{environment}{quotation} -% The quotation environment is also defined by making clever use of -% the list environment's parameters. The lines in the environment -% are set smaller than |\textwidth|. The first line of a paragraph -% inside this environment is indented. -% -% \begin{macrocode} -\newenvironment{quotation} - {\list{}{% - \listparindent\z@ - \itemindent\listparindent - \rightmargin\leftmargin - \parsep\z@ \@plus\p@}% - \item[]} - {\endlist} -% \end{macrocode} -% \end{environment} -% -% \subsubsection{Quote} -% -% \begin{environment}{quote} -% The quote environment is like the quotation environment except -% that paragraphs are not indented. -% -% \begin{macrocode} -\newenvironment{quote} - {\list{}{\rightmargin\leftmargin}% - \item[]} - {\endlist} -% \end{macrocode} -% \end{environment} -% -% \subsubsection{Theorem} -% -% \begin{macro}{\@begintheorem} -% \begin{macro}{\@opargbegintheorem} -% \begin{macro}{\@endtheorem} -% These document classes have a slightly modified \Lenv{theorem} -% environment style. Surrounding whitespace is added and an -% initialisation of |\labelsep|. Finally a slanted font instead of -% an italic font is used. -% \begin{macrocode} -\def\@begintheorem#1#2{% - \vskip\baselineskip \labelsep=.5em% - \trivlist - \item[\hskip \labelsep{\bfseries #1\ #2}]\slshape} -\def\@opargbegintheorem#1#2#3{% - \vskip\baselineskip \labelsep=.5em% - \trivlist - \item[\hskip \labelsep{\bfseries #1\ #2\ (#3)}]\slshape} -\def\@endtheorem{\endtrivlist \vskip\baselineskip} -% \end{macrocode} -% \end{macro} -% \end{macro} -% \end{macro} -% -% \subsubsection{Titlepage} -% -% \begin{environment}{titlepage} -% In the normal environments, the titlepage environment does nothing -% but start and end a page, and inhibit page numbers. It also resets -% the page number to zero. In two-column style, it still makes a -% one-column page. -% -% \begin{macrocode} -\newenvironment{titlepage} - { - \if@twocolumn - \@restonecoltrue\onecolumn - \else - \@restonecolfalse\newpage - \fi - \thispagestyle{empty}% - \if@compatibility - \setcounter{page}{0} - \else - \setcounter{page}{1}% - \fi} - {\if@restonecol\twocolumn \else \newpage \fi - \setcounter{page}{1}% - } -% \end{macrocode} -% \end{environment} -% -% \subsubsection{Appendix} -% -% \begin{macro}{\appendix} -% -% The |\appendix| command is not really an environment, it is a -% macro that makes some changes in the way things are done. -% -% In this document class the |\appendix| command must do the -% following: -% \begin{itemize} -% \item reset the chapter and section counters to zero, -% \item set |\@chapapp| to |\appendixname| (for messages), -% \item redefine the chapter counter to produce appendix numbers, -% \item possibly redefine the |\chapter| command if appendix titles -% and headings are to look different from chapter titles and -% headings. -% \end{itemize} -% -% \begin{macrocode} -\newcommand\appendix{\par - \setcounter{chapter}{0}% - \setcounter{section}{0}% - \renewcommand\@chapapp{\appendixname}% - \renewcommand\thechapter{\Alph{chapter}}} -% \end{macrocode} -% \end{macro} -% -% \subsection{Setting parameters for existing environments} -% -% \subsubsection{Array and tabular} -% -% \begin{macro}{\arraycolsep} -% The columns in an array environment are separated by -% 2|\arraycolsep|. -% \begin{macrocode} -\setlength\arraycolsep{5\p@} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\tabcolsep} -% The columns in an tabular environment are separated by -% 2|\tabcolsep|. -% \begin{macrocode} -\setlength\tabcolsep{6\p@} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\arrayrulewidth} -% The width of rules in the array and tabular environments is given -% by |\arrayrulewidth|. -% \begin{macrocode} -\setlength\arrayrulewidth{.4\p@} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\doublerulesep} -% The space between adjacent rules in the array and tabular -% environments is given by |\doublerulesep|. -% \begin{macrocode} -\setlength\doublerulesep{2\p@} -% \end{macrocode} -% \end{macro} -% -% \subsubsection{Tabbing} -% -% \begin{macro}{\tabbingsep} -% This controls the space that the |\'| command puts in. (See -% \LaTeX{} manual for an explanation.) -% \begin{macrocode} -\setlength\tabbingsep{\labelsep} -% \end{macrocode} -% \end{macro} -% -% \subsubsection{Minipage} -% -% \begin{macro}{\@minipagerestore} -% The macro |\@minipagerestore| is called upon entry to a minipage -% environment to set up things that are to be handled differently -% inside a minipage environment. -% -% \begin{macrocode} -%<+type1>\def\@minipagerestore{\parindent\unitindent} -%<*type3> -\def\@minipagerestore{% - \parskip=.5\baselineskip \@plus .1\baselineskip - \@minus .1\baselineskip} -% -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\@mpfootins} -% Minipages have their own footnotes; |\skip||\@mpfootins| plays -% same r\^ole for footnotes in a minipage as |\skip||\footins| does -% for ordinary footnotes. -% -% \begin{macrocode} -\skip\@mpfootins = \skip\footins -% \end{macrocode} -% \end{macro} -% -% \subsubsection{Framed boxes} -% -% \begin{macro}{\fboxsep} -% The space left by |\fbox| and |\framebox| between the box and the -% text in it. -% \begin{macro}{\fboxrule} -% The width of the rules in the box made by |\fbox| and |\framebox|. -% \begin{macrocode} -\setlength\fboxsep{3\p@} -\setlength\fboxrule{.4\p@} -% \end{macrocode} -% \end{macro} -% \end{macro} -% -% \subsubsection{Equation and eqnarray} -% -% \begin{macro}{\theequation} -% The equation counter will be reset at beginning of a new chapter -% and the equation number will be prefixed by the chapter number. -% -% This code must follow the |\chapter| definition, or more exactly -% the definition of the chapter counter. -% \begin{macrocode} -\@addtoreset{equation}{chapter} -\renewcommand\theequation{\thechapter.\arabic{equation}} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\jot} -% |\jot| is the extra space added between lines of an eqnarray -% environment. The default value is used. -% \begin{macrocode} -% \setlength\jot{3pt} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\@eqnnum} -% The macro |\@eqnnum| defines how equation numbers are to appear in -% equations. Again the default is used. -% -% \begin{macrocode} -% \def\@eqnnum{(\theequation)} -% \end{macrocode} -% \end{macro} -% -% \subsection{Floating objects} -% -% The file \file{latex.dtx} only defines a number of tools with -% which floating objects can be defined. This is done in the -% document class. It needs to define the following macros for each -% floating object of type \texttt{TYPE} (e.g., \texttt{TYPE} = -% figure). -% -% \begin{description} -% \item[\texttt{\bslash fps@TYPE}] -% The default placement specifier for floats of type -% \texttt{TYPE}. -% -% \item[\texttt{\bslash ftype@TYPE}] -% The type number for floats of type \texttt{TYPE}. Each -% \texttt{TYPE} has associated a unique positive {\texttt -% TYPE} number, which is a power of two. E.g., figures might -% have type number 1, tables type number 2, programs type -% number 4, etc. -% -% \item[\texttt{\bslash ext@TYPE}] -% The file extension indicating the file on which the contents -% list for float type \texttt{TYPE} is stored. For example, -% |\ext@figure| = `lof'. -% -% \item[\texttt{\bslash fnum@TYPE}] -% A macro to generate the figure number for a caption. For -% example, |\fnum@TYPE| == `Figure |\thefigure|'. -% -% \item[\texttt{\bslash @makecaption{\meta{num}}{\meta{text}}}] -% A macro to make a caption, with \meta{num} the value produced -% by |\fnum@...| and \meta{text} the text of the caption. It -% can assume it's in a |\parbox| of the appropriate width. -% This will be used for {\em all} floating objects. -% -% \end{description} -% -% The actual environment that implements a floating object such as -% a figure is defined using the macros |\@float| and |\end@float|, -% which are defined in \file{latex.dtx}. -% -% An environment that implements a single column floating object is -% started with |\@float{|\texttt{TYPE}|}[|\meta{placement}|]| of type -% \texttt{TYPE} with \meta{placement} as the placement specifier. -% The default value of \meta{PLACEMENT} is defined by |\fps@TYPE|. -% -% The environment is ended by |\end@float|. E.g., |\figure| == -% |\@float|{figure}, |\endfigure| == |\end@float|. -% -% \subsubsection{Figure} -% -% Here is the implementation of the figure environment. -% -% \begin{macro}{\c@figure} -% First we have to allocate a counter to number the figures. In -% this document class the figures are numbered per chapter. -% \begin{macrocode} -\newcounter{figure}[chapter] -\renewcommand\thefigure{\thechapter.\@arabic\c@figure} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\fps@figure} -% \begin{macro}{\ftype@figure} -% \begin{macro}{\ext@figure} -% \begin{macro}{\num@figure} -% Here are the parameters for the floating objects of type `figure'. -% \begin{macrocode} -\def\fps@figure{tbp} -\def\ftype@figure{1} -\def\ext@figure{lof} -\def\fnum@figure{\figurename~\thefigure} -% \end{macrocode} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% -% \begin{environment}{figure} -% \begin{environment}{figure*} -% And the definition of the actual environment. The form with the -% |*| is used for double column figures. -% \begin{macrocode} -\newenvironment{figure} - {\@float{figure}} - {\end@float} -\newenvironment{figure*} - {\@dblfloat{figure}} - {\end@dblfloat} -% \end{macrocode} -% \end{environment} -% \end{environment} -% -% \subsubsection{Table} -% -% Here is the implementation of the table environment. It is very -% much the same as the figure environment. -% -% \begin{macro}{\c@table} -% First we have to allocate a counter to number the tables. In this -% document class the tables are numbered per chapter. -% \begin{macrocode} -\newcounter{table}[chapter] -\renewcommand\thetable{\thechapter.\@arabic\c@table} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\fps@table} -% \begin{macro}{\ftype@table} -% \begin{macro}{\ext@table} -% \begin{macro}{\num@table} -% Here are the parameters for the floating objects of type `table'. -% \begin{macrocode} -\def\fps@table{tbp} -\def\ftype@table{2} -\def\ext@table{lot} -\def\fnum@table{\tablename~\thetable} -% \end{macrocode} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% -% \begin{environment}{table} -% \begin{environment}{table*} -% And the definition of the actual environment. The form with the -% |*| is used for double column tables. -% \begin{macrocode} -\newenvironment{table} - {\@float{table}} - {\end@float} -\newenvironment{table*} - {\@dblfloat{table}} - {\end@dblfloat} -% \end{macrocode} -% \end{environment} -% \end{environment} -% -% \subsubsection{Captions} -% -% \begin{macro}{\@makecaption} -% The |\caption| command calls |\@makecaption| to format the -% caption of floating objects. It gets two arguments, -% \meta{number}, the number of the floating object and \meta{text}, -% the text of the caption. Usually \meta{number} contains a string -% such as `Figure 3.2'. The macro can assume it is called inside a -% |\parbox| of right width, with |\normalsize|. -% -% \begin{macro}{\abovecaptionskip} -% \begin{macro}{\belowcaptionskip} -% These lengths contain the amount of white space to leave above -% and below the caption. -% \begin{macrocode} -\newlength\abovecaptionskip -\newlength\belowcaptionskip -\setlength\abovecaptionskip{10\p@} -\setlength\belowcaptionskip{0\p@} -% \end{macrocode} -% \end{macro} -% \end{macro} -% -% The definition of this macro is |\long| in order to allow more -% then one paragraph in a caption. -% \begin{macrocode} -\long\def\@makecaption#1#2{% - \vskip\abovecaptionskip -% \end{macrocode} -% We want to see if the caption fits on one line on the page, -% therefore we first typeset it in a temporary box. -% \begin{macrocode} - \sbox\@tempboxa{{\CaptionLabelFont#1:} \CaptionTextFont#2}% -% \end{macrocode} -% We can the measure its width. It that is larger than the current -% |\hsize| we typeset the caption as an ordinary paragraph. -% \begin{macrocode} - \ifdim \wd\@tempboxa >\hsize - {\CaptionLabelFont#1:} \CaptionTextFont#2\par -% \end{macrocode} -% If the caption fits, we center it. -% \begin{macrocode} - \else - \hbox to\hsize{\hfil\box\@tempboxa\hfil}% - \fi - \vskip\belowcaptionskip} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\CaptionLabelFont} -% \begin{macro}{\CaptionTextFont} -% These macros can contain the fonts used for typesetting captions. -% By default they do nothing. -% \begin{macrocode} -\newcommand\CaptionLabelFont{\relax} -\newcommand\CaptionTextFont{\relax} -% \end{macrocode} -% \end{macro} -% \end{macro} -% -% \begin{macro}{\CaptionFonts} -% To change the fonts that are used to typeset captions -% this macro can be used. -% \begin{macrocode} -\newcommand\CaptionFonts[2]{% - \renewcommand\CaptionLabelFont{#1}% - \renewcommand\CaptionTextFont{#2}% - } -% \end{macrocode} -% \end{macro} -% -% \subsection{Font changing} -% -% Here we supply the declarative font changing commands that were -% common in \LaTeX\ version 2.09 and earlier. These commands work -% in text mode \emph{and} in math mode. They are provided for -% compatibility, but one should start using the |\text...| and -% |\math...| commands instead. These commands are defined using -% |\DeclareOldFontCommand|, a command with three arguments: the user -% command to be defined; \LaTeX\ commands to execute in text mode -% and \LaTeX\ commands to execute in math mode. -% -% \begin{macro}{\rm} -% \begin{macro}{\tt} -% \begin{macro}{\sf} -% -% The commands to change the family. When in compatibility mode we -% select the `default' font first, to get \LaTeX2.09 behviour. -% \begin{macrocode} -\DeclareOldFontCommand{\rm}{\normalfont\rmfamily}{\mathrm} -\DeclareOldFontCommand{\sf}{\normalfont\sffamily}{\mathsf} -\DeclareOldFontCommand{\tt}{\normalfont\ttfamily}{\mathtt} -% \end{macrocode} -% \end{macro} -% \end{macro} -% \end{macro} -% -% \begin{macro}{\bf} -% The command to change to the bold series. One should use -% |\mdseries| to explicitly switch back to medium series. -% \begin{macrocode} -\DeclareOldFontCommand{\bf}{\normalfont\bfseries}{\mathbf} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\sl} -% \begin{macro}{\it} -% \begin{macro}{\sc} -% -% And the commands to change the shape of the font. The slanted and -% small caps shapes are not available by default as math alphabets, -% so those changes do nothing in math mode. One should use -% |\upshape| to explicitly change back to the upright shape. -% \begin{macrocode} -\DeclareOldFontCommand{\it}{\normalfont\itshape}{\mathit} -\DeclareOldFontCommand{\sl}{\normalfont\slshape}{\relax} -\DeclareOldFontCommand{\sc}{\normalfont\scshape}{\relax} -% \end{macrocode} -% \end{macro} -% \end{macro} -% \end{macro} -% -% \begin{macro}{\cal} -% \begin{macro}{\mit} -% -% The commands |\cal| and |\mit| should only be used in math mode, -% outside math mode they have no effect. Currently the New Font -% Selection Scheme defines these commands to generate warning -% messages. Therefore we have to define them `by hand'. -% \begin{macrocode} -\renewcommand{\cal}{\protect\pcal} -\newcommand{\pcal}{\@fontswitch{\relax}{\mathcal}} -\renewcommand{\mit}{\protect\pmit} -\newcommand{\pmit}{\@fontswitch{\relax}{\mathnormal}} -% \end{macrocode} -% \end{macro} -% \end{macro} -% -% \begin{macro}{\pem} -% The definition of |\pem| is changed here to have slanted instead -% of italic fonts. -% \begin{macrocode} -\def\pem{\@nomath\em \ifdim \fontdimen\@ne\font >\z@ - \upshape \else \slshape \fi} -% \end{macrocode} -% \end{macro} -% -% \section{Cross Referencing} -% \subsection{Table of Contents, etc.} -% -% A |\section| command writes a -% |\contentsline{section}{|\meta{title}|}{|\meta{page}|}| command -% on the \file{.toc} file, where \meta{title} contains the -% contents of the entry and \meta{page} is the page number. If -% sections are being numbered, then \meta{title} will be of the -% form |\numberline{|\meta{num}|}{|\meta{heading}|}| where -% \meta{num} is the number produced by |\thesection|. Other -% sectioning commands work similarly. -% -% A |\caption| command in a `figure' environment writes -% -% |\contentsline{figure}{\numberline{|\meta{num}|}{|% -% \meta{caption}|}}{|\meta{page}|}| -% -% on the .\file{lof} file, where \meta{num} is the number produced -% by |\thefigure| and \meta{caption} is the figure caption. It -% works similarly for a `table' environment. -% -% The command |\contentsline{|\meta{name}|}| expands to -% |\l@|\meta{name}. So, to specify the table of contents, we must -% define |\l@chapter|, |\l@section|, |\l@subsection|, ... ; to -% specify the list of figures, we must define |\l@figure|; and so -% on. Most of these can be defined with either the -% |\@dottedtocline| or the |\@regtocline| command, which work as -% follows. -% -% |\@dottedtocline{|\meta{level}|}{|\meta{indent}|}{|^^A -% \meta{numwidth}|}{|^^A -% \meta{title}|}{|\meta{page}|}| -% -% |\@regtocline{|\meta{level}|}{|\meta{title}|}{|\meta{page}|}| -% -% \begin{description} -% \item[\meta{level}] An entry is produced only if\meta{ level} -% $<=$ value of the \Lcount{tocdepth} counter. Note, -% |\chapter| is level 0, |\section| is level 1, etc. -% \item[\meta{indent}] The indentation from the outer left margin -% of the start of the contents line. -% \item[\meta{numwidth}] The width of a box in which the section -% number is to go, if \meta{title} includes a |\numberline| -% command. -% \end{description} -% -% \begin{macro}{\@pnumwidth} -% \begin{macro}{\@tocrmarg} -% \begin{macro}{\@dotsep} -% This command uses the following three parameters, which are set -% with a |\newcommand| (so em's can be used to make them depend upon -% the font). -% \begin{description} -% \item[\texttt{\bslash @pnumwidth}] The width of a box in which the -% page number is put. -% \item[\texttt{\bslash @tocrmarg}] The right margin for multiple -% line entries. One wants |\@tocrmarg| > or = |\@pnumwidth| -% \item[\texttt{\bslash @dotsep}] Separation between dots, in mu -% units. Should be defined as a number like 2 or 1.7 -% \end{description} -% -% \begin{macrocode} -\newcommand\@pnumwidth{1.55em} -\newcommand\@tocrmarg {2.55em} -\newcommand\@dotsep{4.5} -\setcounter{tocdepth}{2} -% \end{macrocode} -% \end{macro} -% \end{macro} -% \end{macro} -% -% \subsubsection{Table of Contents} -% -% \begin{macro}{\tableofcontents} -% This macro is used to request that \LaTeX{} produces a table of -% contents. The tables of contents, figures etc. are always set in -% single-column style. -% -% \begin{macrocode} -\newcommand\tableofcontents{% - \if@twocolumn - \@restonecoltrue\onecolumn - \else - \@restonecolfalse - \fi -% \end{macrocode} -% The title is set using the |\chapter*| command, making sure that -% the running head --if one is required-- contains the right -% information. -% \begin{macrocode} - \chapter*{\contentsname - \@mkboth{\uppercase{\contentsname}}{\uppercase{\contentsname}}}% -% \end{macrocode} -% The the actual table of contents is made by calling -% |\@starttoc{toc}|. After that we restore twocolumn mode if -% necessary. -% \begin{macrocode} - \@starttoc{toc}% - \if@restonecol\twocolumn\fi - } -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\@starttoc} -% The internal \LaTeXe macro |\@starttoc| needs to be adapted for -% the \file{rapport3} document classes,in order to deal with a the -% fact that for these document classes the |\parskip| is normally -% non-zero. We don't want that in the table of contents. -% \begin{macrocode} -%<*type3> -\def\@starttoc#1{\begingroup - \makeatletter - \parskip\z@ - \@input{\jobname.#1}% - \if@filesw - \expandafter\newwrite\csname tf@#1\endcsname - \immediate\openout \csname tf@#1\endcsname \jobname.#1\relax - \fi \global\@nobreakfalse \endgroup} -% -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\@regtocline} -% These document classes use a different format for the table of -% contents than the standard classes from which they were -% developped. In order to acheive this different format we defined -% the macro |\@regtocline|. -% \begin{macrocode} -\newcommand\@regtocline[3]{% - \ifnum #1>\c@tocdepth - \else - \vskip \z@ plus .2pt - {\hangindent\z@ \@afterindenttrue \interlinepenalty\@M - \leftskip\unitindent - \rightskip=\unitindent plus 1fil - \parfillskip=0cm - \@tempdima=\unitindent - \parindent\z@ - \leavevmode - \hbox{}\hskip -\leftskip\relax#2\nobreak - \hskip 1em \nobreak{\slshape #3}\par - }% - \fi} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\toc@font} -% The changed definition of |\@sect| that we use, selects a -% different font for the table of contents for the various header -% levels. It does this using |\toc@font|. -% \begin{macrocode} -\if@oldtoc - \newcommand\toc@font[1]{\relax} -\else - \newcommand\toc@font[1]{% - \ifcase#1\relax - \bfseries - \or\slshape - \or\rmfamily - \fi} -\fi -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\toc@case} -% The entries for parts are typeset in capital letters in the new -% style of the table of contents. In the old style this isn't -% done. The macro |\toc@case| is used to switch this. -% \begin{macrocode} -\if@oldtoc - \newcommand\toc@case{\relax} -\else - \newcommand\toc@case{\uppercase} -\fi -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\l@part} -% Each sectioning command needs an additional macro to format its -% entry in the table of contents, as described above. The macro for -% the entry for parts is defined in a special way. -% -% First we make sure that if a pagebreak should occur, it occurs -% {\em before} this entry. Also a little whitespace is added and a -% group begun to keep changes local. -% -% First we have the definition from the standard classes. -% \begin{macrocode} -\if@oldtoc -\newcommand\l@part[2]{% - \addpenalty{-\@highpenalty}% - \addvspace{2.25em \@plus\p@}% - \begingroup -% \end{macrocode} -% The macro |\numberline| requires that the width of the box that -% holds the part number is stored in \LaTeX's scratch register -% |\@tempdima|. Therefore we put it there. -% \begin{macrocode} - \setlength\@tempdima{3em}% -% \end{macrocode} -% The we set |\parindent| to 0pt and use |\rightskip| to leave -% enough room for the pagenumbers. To prevent overfull box messages -% the |\parfillskip| is set to a negative value. -% \begin{macrocode} - \parindent \z@ \rightskip \@pnumwidth - \parfillskip -\@pnumwidth -% \end{macrocode} -% Now we can set the entry, in a large bold font. We make sure to -% leave vertical mode, set the part title and add the pagenumber, -% set flush right. -% \begin{macrocode} - {\leavevmode - \large \bfseries #1\hfil \hbox to\@pnumwidth{\hss #2}}\par -% \end{macrocode} -% Prevent a pagebreak immediately after this entry, but use -% |\everypar| to reset the |\if@nobreak| switch. Finally we close -% the group. -% \begin{macrocode} - \nobreak - \global\@nobreaktrue - \everypar{\global\@nobreakfalse\everypar{}} - \endgroup} -% \end{macrocode} -% Then we can introduce our new definition. -% \begin{macrocode} -\else - \newcommand\l@part{\addpenalty{-\@highpenalty} - \addvspace{2.25em \@plus \p@}\@regtocline{0}} -\fi -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\l@chapter} -% This macro formats the entries in the table of contents for -% chapters. It is very similar to |\l@part| -% -% First we make sure that if a pagebreak should occur, it occurs -% {\em before} this entry. Also a little whitespace is added and a -% group begun to keep changes local. -% -% Again we first present the `standard' definition -% \begin{macrocode} -\if@oldtoc -\newcommand\l@chapter[2]{% - \addpenalty{-\@highpenalty}% - \vskip 1.0em \@plus\p@ -% \end{macrocode} -% -% The macro |\numberline| requires that the width of the box that -% holds the part number is stored in \LaTeX's scratch register -% |\@tempdima|. Therefore we put it there. We begin a group, and -% change some of the paragraph parameters. -% \begin{macrocode} - \setlength\@tempdima{1.5em}% - \begingroup - \parindent \z@ \rightskip \@pnumwidth - \parfillskip -\@pnumwidth -% \end{macrocode} -% Then we leave vertical mode and switch to a bold font. -% \begin{macrocode} - \leavevmode \bfseries -% \end{macrocode} -% Because we do not use |\numberline| here, we have do some fine -% tuning `by hand', before we can set the entry. We discourage but -% not disallow a pagebreak immediately after a chapter entry. -% \begin{macrocode} - \advance\leftskip\@tempdima - \hskip -\leftskip - #1\nobreak\hfil \nobreak\hbox to\@pnumwidth{\hss #2}\par - \penalty\@highpenalty - \endgroup} -% \end{macrocode} -% Then we present our new definition. -% \begin{macrocode} -\else - \newcommand\l@chapter{\@regtocline{0}} -\fi -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\l@section} -% In this document class the definition for -% |\l@section| is very simple. -% \begin{macrocode} -\if@oldtoc - \newcommand\l@section {\@dottedtocline{1}{1.5em}{2.3em}} -\else - \newcommand\l@section {\@regtocline{1}} -\fi -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\l@subsection} -% \begin{macro}{\l@subsubsection} -% \begin{macro}{\l@paragraph} -% \begin{macro}{\l@subparagraph} -% All lower level entries are defined using the macro -% |\@dottedtocline| or |\@regtocline| (see above). -% \begin{macrocode} -\if@oldtoc - \newcommand\l@subsection {\@dottedtocline{2}{3.8em}{3.2em}} - \newcommand\l@subsubsection{\@dottedtocline{3}{7.0em}{4.1em}} - \newcommand\l@paragraph {\@dottedtocline{4}{10em}{5em}} - \newcommand\l@subparagraph {\@dottedtocline{5}{12em}{6em}} -\else - \newcommand\l@subsection {\@regtocline{2}} - \newcommand\l@subsubsection{\@regtocline{3}} - \newcommand\l@paragraph {\@regtocline{4}} - \newcommand\l@subparagraph {\@regtocline{5}} -\fi -% \end{macrocode} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% -% \subsubsection{List of figures} -% -% \begin{macro}{\listoffigures} -% This macro is used to request that \LaTeX{} produces a list of -% figures. It is very similar to |\tableofcontents|. -% -% \begin{macrocode} -\newcommand\listoffigures{% - \if@twocolumn - \@restonecoltrue\onecolumn - \else - \@restonecolfalse - \fi - \chapter*{\listfigurename - \@mkboth{\uppercase{\listfigurename}}% - {\uppercase{\listfigurename}}}% - \@starttoc{lof}% - } -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\l@figure} -% This macro produces an entry in the list of figures. -% \begin{macrocode} -\if@oldtoc - \newcommand\l@figure{\@dottedtocline{1}{1.5em}{2.3em}} -\else - \newcommand\l@figure{\@regtocline{1}} -\fi -% \end{macrocode} -% \end{macro} -% -% \subsubsection{List of tables} -% -% \begin{macro}{\listoftables} -% This macro is used to request that \LaTeX{} produces a list of -% tables. It is very similar to |\tableofcontents|. -% -% \begin{macrocode} -\newcommand\listoftables{% - \if@twocolumn - \@restonecoltrue\onecolumn - \else - \@restonecolfalse - \fi - \chapter*{\listtablename - \@mkboth{\uppercase{\listtablename}}{\uppercase{\listtablename}}}% - \@starttoc{lot}% - \if@restonecol\twocolumn\fi - } -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\l@table} -% This macro produces an entry in the list of tables. -% \begin{macrocode} -\let\l@table\l@figure -% \end{macrocode} -% \end{macro} -% -% \subsection{Bibliography} -% -% \begin{macro}{\bibindent} -% The ``open'' bibliography format uses an indentation of -% |\bibindent|. -% \begin{macrocode} -\newdimen\bibindent -\bibindent=1.5em -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\newblock} -% This is a dummy definition for this macro which is used in the -% \textsf{thebibliography} environment. -% \begin{macrocode} -\newcommand\newblock{} -% \end{macrocode} -% \end{macro} -% -% \begin{environment}{thebibliography} -% The `thebibliography' environment executes the following -% commands: -% -% |\renewcommand\newblock{\hskip .11em \@plus .33em \@minus .07em}| -% -- Defines the ``closed'' format, where the blocks (major units -% of information) of an entry run together. -% -% |\sloppy| -- Used because it's rather hard to do line breaks in -% bibliographies, -% -% |\sfcode`\.=1000\relax| -- -% Causes a `.' (period) not to produce an end-of-sentence space. -% -% The implementation of this environment is based on the generic -% list environment. It uses the \Lcount{enumiv} counter internally -% to generate the labels of the list. -% -% When an empty `thebibliography' environment is found, a warning -% is issued. -% -% \begin{macrocode} -\newenvironment{thebibliography}[1] - {\chapter*{\bibname - \@mkboth{\uppercase{\bibname}}% - {\uppercase{\bibname}}}% - \list{\@biblabel{\arabic{enumiv}}}% - {\settowidth\labelwidth{\@biblabel{#1}}% - \leftmargin\labelwidth - \advance\leftmargin\labelsep - \if@openbib - \advance\leftmargin\bibindent - \itemindent -\bibindent - \listparindent \itemindent - \parsep \z@ - \fi - \usecounter{enumiv}% - \let\p@enumiv\@empty - \renewcommand\theenumiv{\arabic{enumiv}}}% - \if@openbib - \renewcommand\newblock{\par} - \else - \renewcommand\newblock{\hskip .11em \@plus.33em \@minus.07em}% - \fi - \sloppy\clubpenalty4000\widowpenalty4000% - \sfcode`\.=\@m} - {\def\@noitemerr{\@warning{Empty `thebibliography' environment}}% - \endlist} -% \end{macrocode} -% \end{environment} -% -% \begin{macro}{\@biblabel} -% The label for a |\bibitem[...]| command is produced by this -% macro. The default from \file{latex.dtx} is used. -% \begin{macrocode} -% \renewcommand\@biblabel[1]{[#1]\hfill} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\@cite} -% The output of the |\cite| command is produced by this macro. The -% default from \file{latex.dtx} is used. -% \begin{macrocode} -% \renewcommand\@cite[1]{[#1]} -% \end{macrocode} -% \end{macro} -% -% \subsection{The index} -% -% \begin{environment}{theindex} -% The environment `theindex' can be used for indices. It makes an -% index with two columns, with each entry a seperate paragraph. At -% the user level the commands |\item|, |\subitem| and |\subsubitem| -% are used to produce index entries of various levels. When a new -% letter of the alphabet is encountered an amount of |\indexspace| -% white space can be added. -% -% \begin{macrocode} -\newenvironment{theindex} - {\if@twocolumn - \@restonecolfalse - \else - \@restonecoltrue - \fi - \columnseprule \z@ - \columnsep 35\p@ - \twocolumn[\@makeschapterhead{\indexname}]% - \@mkboth{\uppercase{\indexname}}% - {\uppercase{\indexname}}% - \thispagestyle{plain}\parindent\z@ - \parskip\z@ \@plus .3\p@\relax - \let\item\@idxitem} -% \end{macrocode} -% When the document continues after the index and it was a one -% column document we have to switch back to one column after the -% index. -% \begin{macrocode} - {\if@restonecol\onecolumn\else\clearpage\fi} -% \end{macrocode} -% \end{environment} -% -% \begin{macro}{\@idxitem} -% \begin{macro}{\subitem} -% \begin{macro}{\subsubitem} -% Thsee macros are used to format the entries in the index. ^^AA ??? -% \begin{macrocode} -\newcommand\@idxitem {\par\hangindent 40\p@} -\newcommand\subitem {\par\hangindent 40\p@ \hspace*{20\p@}} -\newcommand\subsubitem{\par\hangindent 40\p@ \hspace*{30\p@}} -% \end{macrocode} -% \end{macro} -% \end{macro} -% \end{macro} -% -% \begin{macro}{\indexspace} -% The amount of white space that is inserted between `letter -% blocks' in the index. -% \begin{macrocode} -\newcommand\indexspace{\par \vskip 10\p@ \@plus5\p@ \@minus3\p@\relax} -% \end{macrocode} -% \end{macro} -% -% \subsection{Footnotes} -% -% \begin{macro}{\footnoterule} -% Usually, footnotes are separated from the main body of the text -% by a small rule. This rule is drawn by the macro |\footnoterule|. -% We have to make sure that the rule takes no vertical space (see -% \file{plain.tex}) so we compensate for the natural heigth of the -% rule of 0.4pt by adding the right amount of vertical skip. -% -% To prevent the rule from colliding with the footnote we first add -% a little negative vertical skip, then we put the rule and add -% some positive vertical skip. -% \begin{macrocode} -\renewcommand\footnoterule{% - \kern-3\p@ - \kern.5\baselineskip - \hrule\@width\unitindent - \kern.4\baselineskip -} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\c@footnote} -% Footnotes are numbered within chapters. -% \begin{macrocode} -% \newcounter{footnote} -\@addtoreset{footnote}{chapter} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\@makefntext} -% The footnote mechanism of \LaTeX{} calls the macro |\@makefntext| -% to produce the actual footnote. The macro gets the text of the -% footnote as its argument and should use |\@thefnmark| as the mark -% of the footnote. The macro |\@makefntext|is called when -% effectively inside a |\parbox| of width |\columnwidth| (i.e., -% with |\hsize| = |\columnwidth|). -% -% An example of what can be achieved is given by the following piece -% of \TeX\ code. -% \begin{verbatim} -% \long\def\@xmakefntext#1#2{% -% %<-type3> \parindent=.5\unitindent -% %<+type3> \parindent=\z@\parskip=.5\baselineskip -% \def\labelitemi{--}\@revlabeltrue -% {\setbox0=\hbox {#1\hskip.5em plus 1fil}% -% \dimen0=2\wd0 -% \ifdim\dimen0>\unitindent -% \global\unitindent=\dimen0 -% \@indentset -% \fi}% -% \@setpar{\@@par -% \@tempdima \hsize -% \advance\@tempdima-.5\unitindent -% \parshape \@ne .5\unitindent \@tempdima}% -% \par -% \noindent\llap{\hbox to .5\unitindent{#1\hfil}}#2} -% \end{verbatim} -% The effect of this definition is that all lines of the footnote -% are indented by 10pt, while the first line of a new paragraph is -% indented by 1em. To change these dimensions, just substitute the -% desired value for `10pt' (in both places) or `1em'. The mark is -% flushright against the footnote. -% -% In these document classes we use a simpler macro, in which the -% footnote text is set like an ordinary text paragraph, with no -% indentation except on the first line of the footnote. Thus, all -% the macro must do is set |\parindent| to the appropriate value -% for succeeding paragraphs and put the proper indentation before -% the mark. We change the label of itemized lists inside footnotes -% and need to check that the |\unitindent| is large enough for our -% purposes. -% -% For most of the document classes produced from this file we need -% a slightly modified |\@makefntext| on the title page, so we -% introduce an extra macro, |\@xmakefntext|. -% \begin{macrocode} -\def\@makefntext{\@xmakefntext{$\m@th\@thefnmark$.}} -\long\def\@xmakefntext#1{% - \parindent\z@ - \def\labelitemi{--}\@revlabeltrue - {\setbox0=\hbox {#1\hskip.5em plus 1fil} - \dimen0=2\wd0\relax - \ifdim\dimen0>\unitindent - \global\unitindent=\dimen0\relax - \@indentset - \fi} - \leavevmode\hbox to .5\unitindent{#1\hfil}} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\@makefnmark} -% The footnote markers that are printed in the text to point to the -% footnotes should be produced by the macro |\@makefnmark|. We use -% the default definition for it. -% \begin{macrocode} -%\def\@makefnmark{\hbox{$^{\@thefnmark}\m@th$}} -% \end{macrocode} -% \end{macro} -% -% \section{Initialization} -% -% \subsection{Words} -% -% \begin{macro}{\contentsname} -% \begin{macro}{\listfigurename} -% \begin{macro}{\listtablename} -% \begin{macro}{\refname} -% \begin{macro}{\bibname} -% \begin{macro}{\indexname} -% \begin{macro}{\figurename} -% \begin{macro}{\tablename} -% \begin{macro}{\partname} -% \begin{macro}{\chaptername} -% \begin{macro}{\appendixname} -% \begin{macro}{\abstractname} -% \begin{macro}{\seename} -% \begin{macro}{\andname} -% This document class is for documents prepared in the English language. -% To prepare a version for another language, various English words must -% be replaced. All the English words that require replacement are -% defined below in command names. -% -% \begin{macrocode} -\newcommand\contentsname{Contents} -\newcommand\listfigurename{List of Figures} -\newcommand\listtablename{List of Tables} -\newcommand\bibname{Bibliography} -\newcommand\indexname{Index} -\newcommand\figurename{Figure} -\newcommand\tablename{Table} -\newcommand\partname{Part} -\newcommand\chaptername{Chapter} -\newcommand\appendixname{Appendix} -\newcommand\abstractname{Abstract} -\newcommand\seename{see} -\newcommand\andname{and} -% \end{macrocode} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% -% \subsection{Date} -% -% \begin{macro}{\today} -% This macro uses the \TeX\ primitives |\month|, |\day| and |\year| -% to provide the date of the \LaTeX-run. -% \begin{macrocode} -\newcommand\today{\ifcase\month\or - January\or February\or March\or April\or May\or June\or - July\or August\or September\or October\or November\or December\fi - \space\number\day, \number\year} -% \end{macrocode} -% \end{macro} -% -% \subsection{Two column mode} -% -% \begin{macro}{\columnsep} -% This gives the distance between two columns in two column mode. -% \begin{macrocode} -\setlength\columnsep{10\p@} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\columnseprule} -% This gives the width of the rule between two columns in two -% column mode. We have no visible rule. -% \begin{macrocode} -\setlength\columnseprule{0\p@} -% \end{macrocode} -% \end{macro} -% -% \subsection{The page style} -% -% We have \pstyle{plain} pages unless the user specified -% otherwise. We use arabic pagenumbers. -% \begin{macrocode} -\pagestyle{plain} -\pagenumbering{arabic} % Arabic page numbers -% \end{macrocode} -% -% When the \Lopt{twocolumn} option was specified we call -% |\twocolumn| to activate this mode. We try to make each column as -% long as the others, but call |sloppy| to make our life easier. -% \begin{macrocode} -\if@twocolumn - \twocolumn - \sloppy - \flushbottom -% \end{macrocode} -% Normally we call |\onecolumn| to initiate typesetting in one -% column. -% \begin{macrocode} -\else - \onecolumn -\fi -% \end{macrocode} -% -% \begin{macro}{\frenchspacing} -% Controls the amount of space after a punctuation mark. -% \begin{macrocode} -\frenchspacing -% -% \end{macrocode} -% \end{macro} -% -% \Finale -% -\endinput -% -- cgit v1.2.3