From ce1c001f7db86ff8f09c1203b965ed9f44531d7a Mon Sep 17 00:00:00 2001 From: Norbert Preining Date: Sun, 8 May 2022 03:00:48 +0000 Subject: CTAN sync 202205080300 --- .../koma-script/source/scrkernel-listsof.dtx | 995 +++++++++++---------- 1 file changed, 531 insertions(+), 464 deletions(-) (limited to 'macros/latex/contrib/koma-script/source/scrkernel-listsof.dtx') diff --git a/macros/latex/contrib/koma-script/source/scrkernel-listsof.dtx b/macros/latex/contrib/koma-script/source/scrkernel-listsof.dtx index b7ff8d719e..21db04d92b 100644 --- a/macros/latex/contrib/koma-script/source/scrkernel-listsof.dtx +++ b/macros/latex/contrib/koma-script/source/scrkernel-listsof.dtx @@ -1,8 +1,7 @@ -% \CheckSum{673} % \iffalse meta-comment % ====================================================================== % scrkernel-listsof.dtx -% Copyright (c) Markus Kohm, 2002-2020 +% Copyright (c) Markus Kohm, 2002-2022 % % This file is part of the LaTeX2e KOMA-Script bundle. % @@ -18,55 +17,18 @@ % The Current Maintainer and author of this work is Markus Kohm. % % This work consists of all files listed in manifest.txt. -% ---------------------------------------------------------------------- -% scrkernel-listsof.dtx -% Copyright (c) Markus Kohm, 2002-2020 -% -% Dieses Werk darf nach den Bedingungen der LaTeX Project Public Lizenz, -% Version 1.3c, verteilt und/oder veraendert werden. -% Die neuste Version dieser Lizenz ist -% http://www.latex-project.org/lppl.txt -% und Version 1.3c ist Teil aller Verteilungen von LaTeX -% Version 2005/12/01 oder spaeter und dieses Werks. -% -% Dieses Werk hat den LPPL-Verwaltungs-Status "author-maintained" -% (allein durch den Autor verwaltet). -% -% Der Aktuelle Verwalter und Autor dieses Werkes ist Markus Kohm. -% -% Dieses Werk besteht aus den in manifest.txt aufgefuehrten Dateien. % ====================================================================== -% \fi -% -% \CharacterTable -% {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z -% Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z -% Digits \0\1\2\3\4\5\6\7\8\9 -% Exclamation \! Double quote \" Hash (number) \# -% Dollar \$ Percent \% Ampersand \& -% Acute accent \' Left paren \( Right paren \) -% Asterisk \* Plus \+ Comma \, -% Minus \- Point \. Solidus \/ -% Colon \: Semicolon \; Less than \< -% Equals \= Greater than \> Question mark \? -% Commercial at \@ Left bracket \[ Backslash \\ -% Right bracket \] Circumflex \^ Underscore \_ -% Grave accent \` Left brace \{ Vertical bar \| -% Right brace \} Tilde \~} -% -% \iffalse -%%% From File: $Id: scrkernel-listsof.dtx 3477 2020-04-11 07:26:26Z kohm $ +%%% From File: $Id: scrkernel-listsof.dtx 3733 2022-03-01 08:20:43Z kohm $ %%%% (run: prepare) % % \end{macrocode} -% \selectlanguage{ngerman}%^^A % -% \begin{macro}{\if@tocleft} -% \changes{v2.8q}{2001/11/14}{neuer Schalter}%^^A -% \changes{v2.98c}{2008/03/05}{wird früher definiert}%^^A -% \begin{macro}{\@toclefttrue} -% \begin{macro}{\@tocleftfalse} -% Die Wahl der Darstellungsart für das Inhaltsverzeichnis wird in einem -% Schalter gespeichert. +% \begin{macro}{\@tocleftfalse,\@tocleftrue,\if@tocleft} +% \changes{v2.8q}{2001/11/14}{added} +% \changes{v2.98c}{2008/03/05}{earlier definition} +% The switch is used to store the information whether to use a flat +% (\cs{@toclefttrue}) or a graduated (\cs{@tocleftalse}) table of contents. % \begin{macrocode} %<*option> \newif\if@tocleft % % \end{macrocode} -% \end{macro} -% \end{macro} -% \end{macro} +% \end{macro}^^A … \if@tocleft % % \begin{option}{toc} -% \changes{v2.98c}{2008/03/04}{Neue Option}%^^A -% \changes{v3.12}{2013/03/05}{Nutzung der Status-Signalisierung mit -% \cs{FamilyKeyStateProcessed}}%^^A -% \changes{v3.12}{2013/08/26}{\cs{KOMA@options} durch -% \cs{KOMAExecuteOptions} ersetzt}%^^A -% \changes{v3.12a}{2014/01/17}{\cs{KOMAExecuteOptions} durch -% \cs{KOMAoptions} ersetzt}%^^A -% \changes{v3.18}{2015/06/15}{neuer Wert \texttt{indexnumbered}}%^^A -% Dies ist die zentrale Option für Einstellungen des Inhaltsverzeichnisses. +% \changes{v2.98c}{2008/03/04}{added} +% \changes{v3.12}{2013/03/05}{using \cs{FamilyKeyState}} +% \changes{v3.12}{2013/08/26}{\cs{KOMA@options} replaced by +% \cs{KOMAExecuteOptions}} +% \changes{v3.12a}{2014/01/17}{\cs{KOMAExecuteOptions} replaced by +% \cs{KOMAoptions}} +% \changes{v3.18}{2015/06/15}{value \opt{\quotechar=indexnumbered} added} +% The main features of the table of contents can be configured by this +% option. % \begin{macrocode} %<*option> \KOMA@key{toc}{% \KOMA@set@ncmdkey{toc}{@tempa}{% % \end{macrocode} -% Es gibt Werte, um zu bestimmen, welche Verzeichnisse ins Inhaltsverzeichis -% aufgenommen werden. Eigentlich sind das Optionen der jeweiligen -% Verzeichnisses, aber das muss sich der Anwender ja nicht unbedingt merken. -% \changes{v3.28}{2019/10/21}{zusätzliche Werte}%^^A -% Für Index und Gleitumgebungen gibt es ab Version~3.28 einige zusätzliche -% Werte. Die \dots\texttt{listof}\dots-Werte sind allerdings nicht offiziell, -% sondern fangen nur häufige Tippfehler auf. +% \changes{v3.28}{2019/10/21}{several alias values added} +% The provided values are (aliases are also available): +% \begin{description} +% \item[\opt{=noindex}:] (default) for the index neither add an entry to the +% table of contents nor number the heading of the index. +% \end{description} % \begin{macrocode} {noindex}{0},{noidx}{0},% +% \end{macrocode} +% \begin{description} +% \item[\opt{=index}:] for the index add an entry to the table of contents, +% but do not number the index. +% \end{description} +% \begin{macrocode} {index}{1},{idx}{1},% +% \end{macrocode} +% \begin{description} +% \item[\opt{=indexnumbered}:] number the index and therefore also add an +% entry to the table of contents. +% \end{description} +% \begin{macrocode} {indexnumbered}{2},{idxnumbered}{2},{numberedindex}{2},{numberedidx}{2},% +% \end{macrocode} +% \begin{description} +% \item[\opt{=nolistof}:] (default) for any list with category/owner +% \texttt{float} neither add an entry to the table of contents, nor +% number the heading of the list of the floats. +% \end{description} +% \begin{macrocode} {nolistof}{3},{nolistsof}{3},% +% \end{macrocode} +% \begin{description} +% \item[\opt{=listof}:] for each list with category/owner \texttt{float} add an +% entry to the table of contents, but do not number the list of the floats. +% \end{description} +% \begin{macrocode} {listof}{4},{listsof}{4},% +% \end{macrocode} +% \begin{description} +% \item[\opt{=listofnumbered}:] for each list of category/owner \texttt{float} +% number the list of floats and therefore add an entry to table of contents. +% \end{description} +% \begin{macrocode} {listofnumbered}{5},{numberedlistof}{5},% {listsofnumbered}{5},{numberedlistsof}{5},% +% \end{macrocode} +% \begin{description} +% \item[\opt{=nobibliography}:] (default) for the bibliography neither add an +% entry to the table if contents nor number the heading. +% \end{description} +% \begin{macrocode} {nobibliography}{6},{nobib}{6},% +% \end{macrocode} +% \begin{description} +% \item[\opt{=bibliography}:] for the bibliography add an entry to the table +% of contents, but do not number the bibliography. +% \end{description} +% \begin{macrocode} {bibliography}{7},{bib}{7},% +% \end{macrocode} +% \begin{description} +% \item[\opt{=bibliographynumbered}:] number the bibliography and therefore +% add an entry to the table of contents. +% \end{description} +% \begin{macrocode} {bibliographynumbered}{8},{bibnumbered}{8},{numberedbibliography}{8},% {numberedbib}{8},% % \end{macrocode} -% Dann gibt es Optionen für die Darstellungsarten des -% Inhaltsverzeichnisses. Die Variante \texttt{graduated} ist die altbekannte -% Variante. Bei \texttt{flat} hingegen wird eine tabellenartige Form -% verwendet, bei der die Nummern, Texte und Seitenzahlen jeweils untereinander -% stehen. Der für die Nummern benötigte Platz wird dabei automatisch -% ermittelt. +% \begin{description} +% \item[\opt{=flat}:] use the flat version of the table of contents (all +% numbers are at one column, all texts in another one). +% \end{description} % \begin{macrocode} {flat}{9},{left}{9},% +% \end{macrocode} +% \begin{description} +% \item[\opt{=graduated}:] (default) use a hierarchical indented table of +% contents similar to the standard classes. +% \end{description} +% \begin{macrocode} {graduated}{10},{indent}{10},{indented}{10},% % \end{macrocode} -% \changes{v3.12}{2014/09/24}{neue Werte \texttt{numberline} und -% \texttt{nonumberline}}%^^A -% Außerdem können die nicht nummerierten Einträge ggf. ebenfalls mit -% \cs{numberline} eingerückt werden. Das geht über ein Feature von -% \textsf{tocbasic}. +% \changes{v3.12}{2014/09/24}{values \opt{\quotechar=numberline} and +% \opt{\quotechar=nonumberline} etc. added} +% \begin{description} +% \item[\opt{=numberline}:] indent entries without number like entries with +% number. +% \end{description} % \begin{macrocode} {indenttextentries}{11},{indentunnumbered}{11},{numberline}{11},% +% \end{macrocode} +% \begin{macrocode} +% \begin{description} +% \item[\opt{nonumberline}:] (default) do not indent the first line of an +% entry without number +% \end{description} +% \begin{macrocode} {leftaligntextentries}{12},{leftalignunnumbered}{12},{nonumberline}{12},% % \end{macrocode} -% Mit Version~3.15 kommt neu die Möglichkeit hinzu, Kapiteleinträge mit -% Pünktchen zu versehen. +% \changes{v3.15}{2015/01/14}{values \opt{\quotechar=chapterentrywithdots}, +% \opt{\quotechar=chapterentrywithoutdot} resp. +% \opt{\quotechar=sectionentrywithdots}, +% \opt{\quotechar=sectionentrywithoutdot} added} +% \begin{description} +% \item[\opt{=chapterentrywithdots}:] classes with \cs{chapter} provide a dot +% filler also for chapter entries. +% \end{description} % \begin{macrocode} % {chapterentrywithdots}{13},{chapterentrydotfill}{13}, +% \end{macrocode} +% \begin{description} +% \item[\opt{=chapterentrywithoutdots}:] (default) classes with \cs{chapter} use +% a space filler for chapter entries. +% \end{description} +% \begin{macrocode} % {chapterentrywithoutdots}{14},{chapterentryfill}{14}% +% \end{macrocode} +% \begin{description} +% \item[\opt{=sectionentrywithdots}:] classes without \cs{chapter} use +% dot filler also for section entries. +% \end{description} +% \begin{macrocode} %
{sectionentrywithdots}{13},{sectionentrydotfill}{13}, +% \end{macrocode} +% \begin{description} +% \item[\opt{=sectionentrywithoutdots}:] (default) classes without +% \cs{chapter} use a space filler for section entries. +% \end{description} +% \begin{macrocode} %
{sectionentrywithoutdots}{14},{sectionentryfill}{14}% }{#1}% \ifx\FamilyKeyState\FamilyKeyStateProcessed @@ -453,30 +517,23 @@ % \end{macrocode} % \end{option} % -% \begin{option}{tocleft} -% \changes{v2.8q}{2001/11/14}{neue Option}%^^A -% \changes{v2.98c}{2008/03/05}{obsolet}%^^A -% \changes{v3.01a}{2008/11/20}{deprecated}%^^A -% \begin{option}{tocindent} -% \changes{v2.8q}{2001/11/14}{neue Option}%^^A -% \changes{v2.98c}{2008/03/05}{obsolet}%^^A -% \changes{v3.01a}{2008/11/20}{deprecated}%^^A +% \begin{option}{tocleft,tocindent} +% \changes{v2.8q}{2001/11/14}{added} +% \changes{v2.98c}{2008/03/05}{obsolet} +% \changes{v3.01a}{2008/11/20}{deprecated} % \begin{macrocode} %<*option> \KOMA@DeclareDeprecatedOption{tocleft}{toc=flat} \KOMA@DeclareDeprecatedOption{tocindent}{toc=graduated} % % \end{macrocode} -% \end{option} -% \end{option} -% -% \subsection{Definitionen für das Inhaltsverzeichnis} +% \end{option}^^A tocleft,tocindent % -% \begin{macro}{\contentsname} -% \begin{macro}{\listoftocname} -% \changes{v3.00}{2008/07/03}{neu für Paket \textsf{tocbasic}}%^^A -% \changes{v3.27}{2019/05/11}{auch als sprachabhängiger Bezeichner}%^^A -% Der Name des Verzeichnisses. +% \begin{command}{\contentsname} +% \begin{command}{\listoftocname} +% \changes{v3.00}{2008/07/03}{added to be used by \pkg*{tocbasic}} +% \changes{v3.27}{2019/05/11}{language dependency added} +% The name of the table of contents. % \begin{macrocode} %<*body> \newcommand*\contentsname{Contents} @@ -485,35 +542,31 @@ UKenglish,ukenglish,USenglish,usenglish}\contentsname{Contents}% % % \end{macrocode} -% \end{macro} -% \end{macro} +% \end{command}^^A \listoftocname +% \end{command}^^A \contentsname % -% \begin{Counter}{tocdepth} -% Der Zähler gibt an, bis zu welcher Gliederungebene Einträge in das -% Inhaltsverzeichnis aufgenommen werden. Da \textsf{scrartcl} eine -% Ebene tiefer beginnt, wird auch eine Ebene tiefer eingetragen. Damit -% finden sich -- abgesehen von \cs{part} -- immer drei Ebenen im -% Inhaltsverzeichnis. +% \begin{counter}{tocdepth} +% The counter is used to define, down to which level the entries are shown in +% the table of contents (resp. list of floats, because the same value is used +% there). Note: We don't use symbolic values here, because usage of symbolic +% values would add an additional order dependency with the corresponding +% \cs{DeclareSecionCommand}. % \begin{macrocode} %<*body> %\setcounter{tocdepth}{2} %
\setcounter{tocdepth}{3} % % \end{macrocode} -% \end{Counter} +% \end{counter}^^A tocdepth % % \begin{macro}{\toc@heading} -% \changes{v2.3h}{1995/01/21}{neu (intern)}%^^A -% \changes{v2.95}{2002/06/28}{auch für \textsf{scrreprt} und -% \textsf{scrbook}}%^^A -% \changes{v3.00}{2008/07/04}{Verwendung von \cs{toc@heading} ist nicht -% länger empfohlen}%^^A -% \changes{v3.10}{2011/08/31}{\cs{MakeMarkcase} wird beachtet}%^^A -% \changes{v3.30}{2020/02/24}{Leerzeichen am Ende der Warnung entfernt}%^^A -% Befehl, zum Setzen der Überschrift des Inhaltsverzeichnisses. Eigentlich -% ist das überflüssig, weil es nur einmal verwendet wird. Aus Gründen der -% Konsistenz mit den anderen Verzeichnissen machen wir das hier aber -% genauso. +% \changes{v2.3h}{1995/01/21}{added for \cls*{scrartcl}} +% \changes{v2.95}{2002/06/28}{added for \cls*{scrreprt}and \cls*{scrbook}} +% \changes{v3.00}{2008/07/04}{deprecated} +% \changes{v3.10}{2011/08/31}{using \cs{MakeMarkcase}} +% \changes{v3.30}{2020/02/24}{white space at end of warning removed} +% This has been defined before usage of \pkg*{tocbasic}. Internally it is not +% used any longer. % \begin{macrocode} %<*body> \newcommand*\toc@heading{% @@ -530,34 +583,29 @@ } % % \end{macrocode} -% \end{macro} +% \end{macro}^^A \toc@heading % % \begin{macro}{\toc@l@number} -% \changes{v2.8q}{2001/11/14}{neu}%^^A -% Dieses Makro wird innerhalb von \cs{tableofcontents} über -% \cs{before@starttoc} und \cs{after@starttoc} in der -% \texttt{aux}-Datei global definiert. Aus Sicherheitsgründen wird es -% hier global vordefiniert. +% \changes{v2.8q}{2001/11/14}{added} +% The number length storage used by \cs{before@starttoc} for \meta{extension} +% \texttt{toc}. For safety we just \emph{reserve} it. % \begin{macrocode} %<*body> \newcommand*{\toc@l@number}{} % % \end{macrocode} -% \end{macro} +% \end{macro}^^A \toc@l@number % -% \begin{macro}{\tableofcontents} -% \changes{v2.3h}{1995/01/21}{Verwendung von \cs{toc@heading}} -% \changes{v2.8l}{2001/08/16}{Gruppe eingefügt und \cs{parskip} auf -% 0 gesetzt} -% \changes{v2.8q}{2001/11/13}{\cs{@parskipfalse}% -% \cs{@parskip@indent}} -% \changes{v2.8q}{2001/11/14}{\cs{if@tocleft} bearbeiten} -% \changes{v2.95}{2002/06/28}{\textsf{article} beachtet ebenfalls -% \texttt{tocleft}} -% \changes{v2.95}{2004/11/05}{\cs{@parskipfalse} und \cs{@parskip@indent} -% ersetzt} -% \changes{v3.00}{2008/07/04}{auf \textsf{tocbasic} umgestellt} -% Die Ausgabe des Inhaltsverzeichnisses. +% \begin{command}{\tableofcontents} +% \changes{v2.3h}{1995/01/21}{using \cs{toc@heading}} +% \changes{v2.8l}{2001/08/16}{group added an \len{parskip} set to 0} +% \changes{v2.8q}{2001/11/13}{\cs{@parskipfalse} and \cs{@parskip@indent}} +% \changes{v2.8q}{2001/11/14}{\cs{if@tocleft} changed} +% \changes{v2.95}{2002/06/28}{\cls*{scrartcl} also uses \cs{if@tocleft}} +% \changes{v2.95}{2004/11/05}{\cs{@parskipfalse} and \cs{@parskip@indent} replaced} +% \changes{v3.00}{2008/07/04}{re-implementation using \pkg*{tocbasic}} +% The table of contents. See the note above about the local change of +% \cs{if@dynlist}. % \begin{macrocode} %<*body> \newcommand*{\tableofcontents}{% @@ -568,18 +616,27 @@ } % % \end{macrocode} -% \end{macro} +% \end{command}^^A \tableofcontents % -% \begin{macro}{\addtocentrydefault} -% \changes{v3.08}{2010/11/01}{Neu}%^^A -% \changes{v3.12}{2013/09/24}{Verwendung der neuen -% \texttt{tocbasic}-Anweisung \cs{tocbasic@addxcontentsline}} -% Seit Version~3.08 werden Einträge ins Inhaltsverzeichnis in der -% Voreinstellung über diese Anweisung vorgenommen. Das erste Argument ist -% dabei die Gliederungsebene. Das zweite Argument ist die (formatierte) -% Gliederungsnummer oder leer, falls die Überschrift nicht nummeriert -% wird. Das dritte Argument ist der Überschriftentext, der in das -% Inhaltsverzeichnis soll. +% \begin{command}{\addtocentrydefault} +% \changes{v3.08}{2010/11/01}{added} +% \changes{v3.12}{2013/09/24}{using new \pkg*{tocbasic} macro +% \cs{tocbasic@addxcontentsline}} +% Instead of making the entries into the table of contents directly with +% the \LaTeX{} low level command \cs{addcontentsline} we provide a class +% specific low level user command +% \begin{quote} +% \cs{addtocentrydefault}\marg{level name}\marg{formatted number}\marg{entry text} +% \end{quote} +% that uses the \pkg*{tocbasic} package author command +% \cs{tocbasic@addctontentsline}. We cannot use \cs{addxcontentsline} because +% this will run \cs{add\meta{level name}\meta{toc}entry} if available and +% \cs{addtocentrydefault} is used by the entry commands +% \cs{addchaptertocentry}, \cs{addsectiontocentry}. So \cs{addtoentrydefault} +% is a helper for the callbacks from \cs{addxcontentsline} and needs to use +% the package author interface instead of the user interface. For not numbered +% entries the \meta{formatted number} should be empty (not only expand to no +% output). Note: Entries with empty \meta{entry text} will be omitted. % \begin{macrocode} %<*body> \newcommand{\addtocentrydefault}[3]{% @@ -587,36 +644,33 @@ } % % \end{macrocode} -% \end{macro} +% \end{command} % % -% \subsection{Die Verzeichnisse der Gleitumgebungen} +% \subsection{The lists of floats (or similar environments)} % -% Die Verzeichnisse der Gleitumgebungen ähneln dem Inhaltsverzeichnis, stellen -% jedoch eine eigene Klasse dar und werden daher auch über eigene Optionen -% gesteuert. +% The list of tables, list of figures and similar lists of environments with +% category/owner \texttt{float} are very similar to the table of contents. But +% they use a own set of options and also some commands. % -% \selectlanguage{english}%^^A -% \changes{v3.25}{2017/10/10}{extension \texttt{lof} not added explicitely}%^^A -% \changes{v3.25}{2017/10/10}{extension \texttt{lot} not added explicitely}%^^A +% \changes{v3.25}{2017/10/10}{extension \texttt{lof} not added explicitely} +% \changes{v3.25}{2017/10/10}{extension \texttt{lot} not added explicitely} % Note: We must not add extensions \texttt{lof} and \texttt{lot} explicitely, % because these files will be prepared using \cs{DeclareNewTOC} that also % registers the extension. % -% \changes{v1.00}{auto-activation of feature \texttt{onecolumn}} +% \changes{v3.01}{2008/11/13}{auto-activation of feature \texttt{onecolumn}} % Set feature \texttt{onecolumn} for every float list file. % \begin{macrocode} %<*prepare&(book|report)> \AtAddToTocList[float]{\setuptoc{\@currext}{onecolumn}}% % % \end{macrocode} -% \selectlanguage{ngerman}%^^A % % \begin{macro}{\float@@listhead} -% \changes{v2.98c}{2008/03/05}{neu (intern)}%^^A -% \changes{v3.01}{2008/11/14}{deprecated}%^^A -% Setzt nur die Überschrift und sonst nichts. Dabei wird die Überschrift als -% einziges Argument übergeben. +% \changes{v2.98c}{2008/03/05}{added} +% \changes{v3.01}{2008/11/14}{deprecated} +% Prints only the heading, nothing else. The heading text is the argument. % \begin{macrocode} %<*option> \newcommand*{\float@@listhead}{% @@ -625,89 +679,143 @@ } % % \end{macrocode} -% \end{macro} +% \end{macro}^^A \float@@listhead % -% \begin{macro}{\if@dynlist} -% \changes{v2.8q}{2001/11/14}{neuer Schalter}%^^A -% \begin{macro}{\@dynlisttrue} -% \begin{macro}{\@dynlistfalse} -% Die Wahl der Darstellungsart wird in einem Schalter gespeichert. +% \begin{macro}{\@dynlistfalse,\@dynlisttrue,\if@dynlist} +% \changes{v2.8q}{2001/11/14}{added} +% The switch to select the flat (\cs{@dynlisttrue}) or graduated +% (\cs{@dynlistfalse)} list type. % \begin{macrocode} %<*option> \newif\if@dynlist % % \end{macrocode} -% \end{macro} -% \end{macro} -% \end{macro} +% \end{macro}^^A … \if@dynlist % % \begin{option}{listof} -% \changes{v2.98c}{2008/03/05}{Neue Option}%^^A -% \changes{v3.06}{2010/06/02}{Alle über \textsf{tocbasic} realisierten -% Einstellungen wirken sich auch auf Verzeichnisse des Besitzers -% \texttt{float} aus, die erst später unter Kontrolle von -% \textsf{tocbasic} gestellt werden.}%^^A -% \changes{v3.12}{2013/03/05}{Nutzung der Status-Signalisierung mit -% \cs{FamilyKeyStateProcessed}}%^^A -% \changes{v3.12}{2013/06/26}{\cs{KOMA@options} durch -% \cs{KOMAExecuteOptions} ersetzt}%^^A -% \changes{v3.12a}{2014/01/17}{\cs{KOMAExecuteOptions} durch -% \cs{KOMAoptions} ersetzt}%^^A -% Dies ist die zentrale Option für die Gleitumgebungsverzeichnisse. +% \changes{v2.98c}{2008/03/05}{added} +% \changes{v3.06}{2010/06/02}{options for \pkg*{tocbasic} features do not only +% work for the currently defined lists but all future lists of category +% \texttt{float}} +% \changes{v3.12}{2013/03/05}{using \cs{FamilyKeyState}} +% \changes{v3.12}{2013/06/26}{\cs{KOMA@options} replaced by +% \cs{KOMAExecuteOptions}} +% \changes{v3.12a}{2014/01/17}{\cs{KOMAExecuteOptions} replaced by +% \cs{KOMAoptions}} +% The main features of the lists of floats can be configured by this option. % \begin{macrocode} %<*option> \KOMA@key{listof}{% \KOMA@set@ncmdkey{listof}{@tempa}{% % \end{macrocode} -% Es gibt Werte, die dafür sorgen, dass die Verzeichnisse der Gleitumgebungen -% im Inhalsverzeichnis aufgeführt werden. Dazu muss nur \cs{float@@listhead} -% umdefiniert werden. +% The provided values are (aliases are also available): +% \begin{description} +% \item[\opt{=notoc}:] (default) neither number the lists of floats nor add +% entries to them into the table of contents. +% \end{description} % \begin{macrocode} {notoc}{0},{nottotoc}{0},{plainheading}{0},% +% \end{macrocode} +% \begin{description} +% \item[\opt{=totoc}:] do not number the lists of floats but nevertheless add +% an entry for each of them to the table of contents. +% \end{description} +% \begin{macrocode} {totoc}{1},{toc}{1},{notnumbered}{1},% +% \end{macrocode} +% \begin{description} +% \item[\opt{=numbered}:] number the lists of floats and therefore also add an +% for each of them to the table of contents. +% \end{description} +% \begin{macrocode} {numbered}{2},{totocnumbered}{2},{tocnumbered}{2},{numberedtotoc}{2},% {numberedtoc}{2},% % \end{macrocode} -% Dann gibt es Optionen für die Darstellungsarten des -% Inhaltsverzeichnisses. Die Variante \texttt{graduated} ist die altbekannte -% Variante. Bei \texttt{flat} hingegen wird eine tabellenartige Form -% verwendet, bei der die Nummern, Texte und Seitenzahlen jeweils untereinander -% stehen. Der für die Nummern benötigte Platz wird dabei automatisch -% ermittelt. +% \begin{description} +% \item[\opt{=flat}:] use the flat version of the lists of floats (all +% numbers are at one column, all texts in another one). Usually this only +% removes the indent and calculates the needed width of the numbers. But, +% e.g., if chapters are added, it does work over all levels. +% \end{description} % \begin{macrocode} {flat}{3},{left}{3},% +% \item[\opt{=graduated}:] (default) use hierarchical indented lists of +% floats similar to the standard classes. +% \end{description} +% \begin{macrocode} {graduated}{4},{indent}{4},{indented}{4},% % \end{macrocode} -% Dann gibt es eine Option, mit der die Gliederungsebene der Verzeichnisse -% verändert werden kann. -% \changes{v3.25}{2017/12/04}{neuer Wert \texttt{standardlevel}}%^^A +% \begin{description} +% \item[\opt{=leveldown}:] Use for the lists of floats a section hierarchy one +% level below the standard level. +% \end{description} % \begin{macrocode} {leveldown}{5}, +% \end{macrocode} +% \changes{v3.25}{2017/12/04}{value \opt{\quotechar=standardlevel} added} +% \begin{description} +% \item[\opt{=standardlevel}:] (default) Use for the lists of floats the +% standard hierarchy. +% \end{description} +% \begin{macrocode} {standardlevel}{6}, % \end{macrocode} -% \changes{v3.06}{2010/05/18}{neuer Wert \texttt{entryprefix}} -% Dann gibt es eine Option, mit der die Einträge in die Verzeichnisse mit -% einem Prefix versehen werden können, soweit ein solcher Prefix -% existiert. Dieser Wert beinhaltet gleichzeitig auch den Wert \texttt{flat}. +% \changes{v3.06}{2010/05/18}{value \opt{\quotechar=entryprefix} added} +% \begin{description} +% \item[\opt{=entryprefix}:] Prefix the number of each entry with +% \cs{listof\meta{toc}entryprefix}. Note: This is more or less senseless and +% does not work correctly with chapter entries in the lists of floats. It is +% recommended to reconfigure the entries, e.g., using +% \cs{DeclareTOCStyleEntry} or redefining \cs{add\meta{level +% name}\meta{toc}entry} instead. Note: \opt{listof=entryprefix} also +% activates \opt{listof=flat}. +% \end{description} % \begin{macrocode} {entryprefix}{7}, % \end{macrocode} -% \changes{v3.12}{2014/09/24}{neue Werte \texttt{numberline} und -% \texttt{nonumberline}}%^^A -% Außerdem können die nicht nummerierten Einträge ggf. ebenfalls mit -% \cs{numberline} eingerückt werden. Das geht über ein Feature von -% \textsf{tocbasic}. +% \changes{v3.12}{2014/09/24}{values \opt{\quotechar=numberline} and +% \opt{\quotechar=nonumberline} etc. added} +% \begin{description} +% \item[\opt{=numberline}:] indent entries without number like entries with +% number. +% \end{description} % \begin{macrocode} {indenttextentries}{8},{indentunnumbered}{8},{numberline}{8},% +% \end{macrocode} +% \begin{macrocode} +% \begin{description} +% \item[\opt{=nonumberline}:] (default) do not indent the first line of an +% entry without number +% \end{description} +% \begin{macrocode} {leftaligntextentries}{9},{leftalignunnumbered}{9},{nonumberline}{9}% % \end{macrocode} -% Dann gibt es Optionen, für die Unterteilung auf Kapitelebene. Allerdings nur -% für \textsf{scrbook} und \textsf{scrreprt}. +% \begin{description} +% \item[\opt{=chapterentry}:] \cls*{scrbook} and \cls*{scrreprt} provides +% chapter entries into the lists of floats. +% \end{description} % \begin{macrocode} %<*book|report> ,{chapterentry}{10},{withchapterentry}{10},% +% \end{macrocode} +% \begin{description} +% \item[\opt{=nochaptergap}:] Alternatively the lists of floats can ignore chapters. +% \end{description} +% \begin{macrocode} {nochaptergap}{11},{ignorechapter}{11},% +% \end{macrocode} +% \begin{description} +% \item[\opt{=chaptergapsmall}:] (default) chapters can add a small +% vertical distance into the lists of floats. +% \end{description} +% \begin{macrocode} {chaptergapsmall}{12},{smallchaptergap}{12},% +% \end{macrocode} +% \begin{description} +% \item[\opt{=chaptergapline}:] chapters can add an empty line to the lists of +% floats. +% \end{description} +% \begin{macrocode} {chaptergapline}{13},{onelinechaptergap}{13}% % }{#1}% @@ -863,73 +971,61 @@ \KOMA@kav@add{.\KOMAClassFileName}{listof}{leftaligntextentries} % % \end{macrocode} -% \end{option} +% \end{option}^^A listof % % \begin{option}{liststotoc} -% \changes{v2.3h}{1995/01/21}{neue Option}%^^A -% \changes{v2.8b}{2001/06/26}{Verwendung von \cs{float@headings}} -% \changes{v2.4a}{1996/03/13}{\cs{listtabelname} durch -% \cs{listtablename} ersetzt} -% \changes{v2.8g}{2001/07/18}{\cs{float@headings} umbenannt in +% \changes{v2.3h}{1995/01/21}{added} +% \changes{v2.8b}{2001/06/26}{using \cs{float@headings}} +% \changes{v2.4a}{1996/03/13}{\cs{listtabelname} relaces by \cs{listtablename}} +% \changes{v2.8g}{2001/07/18}{\cs{float@headings} renamed to % \cs{float@listhead}} -% \changes{v2.98c}{2008/03/05}{obsolet}%^^A -% \changes{v3.01a}{2008/11/20}{deprecated}%^^A +% \changes{v2.98c}{2008/03/05}{obsolet} +% \changes{v3.01a}{2008/11/20}{deprecated} % \begin{macrocode} %<*option> \KOMA@DeclareDeprecatedOption{liststotoc}{listof=totoc} % % \end{macrocode} -% \end{option} +% \end{option}^^A liststotoc % % \begin{option}{liststotocnumbered} -% \changes{v2.8q}{2002/04/08}{dem langjährigen Druck nachgegeben}%^^A -% \changes{v2.9p}{2003/07/07}{Nummerierung im Kolumnentitel}%^^A -% \changes{v2.98c}{2008/03/05}{obsolet}%^^A -% \changes{v3.01a}{2008/11/20}{deprecated}%^^A +% \changes{v2.8q}{2002/04/08}{added} +% \changes{v2.9p}{2003/07/07}{number also in the running head} +% \changes{v2.98c}{2008/03/05}{obsolet} +% \changes{v3.01a}{2008/11/20}{deprecated} % \begin{macrocode} %<*option> \KOMA@DeclareDeprecatedOption{liststotocnumbered}{listof=numbered} % % \end{macrocode} -% \end{option} +% \end{option}^^A liststotocnumbered % % -% \begin{option}{listsleft} -% \changes{v2.8q}{2001/11/14}{neue Option}%^^A -% \changes{v2.98c}{2008/03/05}{obsolet}%^^A -% \changes{v3.01a}{2008/11/20}{deprecated}%^^A -% \begin{option}{listsindent} -% \changes{v2.8q}{2001/11/14}{neue Option}%^^A -% \changes{v2.98c}{2008/03/05}{obsolet}%^^A -% \changes{v3.01a}{2008/11/20}{deprecated}%^^A +% \begin{option}{listsleft,listsindent} +% \changes{v2.8q}{2001/11/14}{added} +% \changes{v2.98c}{2008/03/05}{obsolet} +% \changes{v3.01a}{2008/11/20}{deprecated} % \begin{macrocode} %<*option> \KOMA@DeclareDeprecatedOption{listsleft}{listof=flat} \KOMA@DeclareDeprecatedOption{listsindent}{listof=graduated} % % \end{macrocode} -% \end{option} -% \end{option} +% \end{option}^^A listsleft,listsindent % % \begin{option}{chapteratlists} -% \changes{v2.96a}{2006/12/03}{neue Option}%^^A -% \changes{v2.98c}{2008/03/05}{nicht mehr bei \textsf{scrartcl}}%^^A -% \changes{v3.12a}{2014/01/17}{fehlendes \cs{FamilyKeyStateProcessed}%^^A -% ergänzt}%^^A -% \changes{v3.17}{2015/03/12}{interne Speicherung der Werte}%^^A -% \changes{v3.28}{2019/11/18}{\cs{ifstr} umbenannt in \cs{Ifstr}}%^^A -% \begin{macro}{\if@chaptertolists} -% \changes{v2.96a}{2006/12/03}{neuer Schalter}%^^A -% \changes{v3.12}{2013/09/24}{Verzeichnisse werden nicht in Verzeichnisse -% eingetragen}%^^A +% \changes{v2.96a}{2006/12/03}{added} +% \changes{v2.98c}{2008/03/05}{not with \cls*{scrartcl}} +% \changes{v3.12a}{2014/01/17}{missing \cs{FamilyKeyStateProcessed} added} +% \changes{v3.17}{2015/03/12}{internal value storage} +% \changes{v3.28}{2019/11/18}{\cs{ifstr} renamed to \cs{Ifstr}} +% \begin{macro}{\@chaptertolistsfalse,\@chaptertoliststrue,\if@chaptertolists} +% \changes{v2.96a}{2006/12/03}{added} +% \changes{v3.12}{2013/09/24}{don't add lists to lists} % \begin{macro}{\@chapterlistsgap} -% \changes{v2.96a}{2006/12/03}{neues Macro (intern)}%^^A -% Option, um einzugstellen, ob Kapitel in den Verzeichnissen der -% Gleitumgebungen Spuren hinterlassen. Man kann wahlweise Lücken einstellen -% (Voreinstellung mit 10\,pt) oder die Kapitelüberschrift eintragen lassen. -% Der Schalter gibt dabei an, ob die Kapitelüberschrift eingetragen werden -% soll. Das interne Hilfsmakro \cs{@chapterlistsgap} enthält den gewünschten -% Abstand. +% \changes{v2.96a}{2006/12/03}{added} +% We can do several special treatments inside the lists of floats, when a new +% chapter starts. % \begin{macrocode} %<*option&(book|report)> \newcommand*{\@chapterlistsgap}{10\p@} @@ -940,11 +1036,23 @@ \KOMA@kav@remove{.\KOMAClassFileName}{listof}{chaptergap}% \KOMA@kav@remove{.\KOMAClassFileName}{listof}{chaptergapsmall}% \KOMA@kav@remove{.\KOMAClassFileName}{listof}{chaptergapline}% +% \end{macrocode} +% \begin{description} +% \item[\opt{=entry}:] add the chapter heading also to the lists of +% float. \cs{@chaptertolisttrue} is used and the distance \cs{@chapterlistgap} +% is set to \len{z@}. +% \end{description} +% \begin{macrocode} \Ifstr{#1}{entry}{% \@chaptertoliststrue\renewcommand*{\@chapterlistsgap}{\z@}% \KOMA@kav@replacevalue{.\KOMAClassFileName}{chapteratlists}{entry}% \KOMA@kav@add{.\KOMAClassFileName}{listof}{chapterentry}% }{% +% \end{macrocode} +% \begin{description} +% \item[\opt{=\meta{distance}}:] use a vertical \meta{distance}. +% \end{description} +% \begin{macrocode} \@chaptertolistsfalse\renewcommand*{\@chapterlistsgap}{#1}% \KOMA@kav@replacevalue{.\KOMAClassFileName}{chapteratlists}% {\@chapterlistsgap}% @@ -969,26 +1077,26 @@ \KOMA@kav@add{.\KOMAClassFileName}{listof}{chaptergapsmall}% % % \end{macrocode} -% \end{macro} -% \end{macro} -% \end{option} +% \end{macro}^^A \@chapterlistgap +% \end{macro}^^A \if@chaptertolists +% \end{option}^^A chapteratlists % % % \begin{macro}{\float@listhead} -% \changes{v2.8b}{2001/06/26}{neu (für alle Paketautoren)}%^^A -% \changes{v2.8g}{2001/07/18}{\cs{float@headings} umbenannt in -% \cs{float@listhead}}%^^A -% \changes{v2.98c}{2008/03/05}{\cs{float@@listhead} wird verwendet}%^^A -% \changes{v3.00}{2008/07/04}{Verwendung von \cs{float@listhead} ist nicht -% länger empfohlen}%^^A -% \changes{v3.10}{2011/08/31}{\cs{MakeMarkcase} wird beachtet}%^^A -% In Absprache mit Anselm Lingnau, dem Autor des Pakets \textsf{float}, wird -% ab Version 2.8b \cs{float@headings} zum Setzen des Kolumnentitels bei den -% Verzeichnissen verwendet, die \textsf{float} für neu definierte floats zur -% Verfügung stellt. Dabei definiert \textsf{float} die Anweisung nur, wenn -% sie nicht bereits existiert. Die Zusammenarbeit wird dadurch -% verbessert. Da Anselm sich in letzter Minute entschlossen hat, das Makro -% \cs{float@listhead} zu nennen, wurde dies in Version 2.8g angepasst. +% \changes{v2.8b}{2001/06/26}{added} +% \changes{v2.8g}{2001/07/18}{\cs{float@headings} renamed to +% \cs{float@listhead}} +% \changes{v2.98c}{2008/03/05}{using \cs{float@@listhead}} +% \changes{v3.00}{2008/07/04}{deprecated} +% \changes{v3.10}{2011/08/31}{using\cs{MakeMarkcase}} +% In 2001 I've designed an interface to allow other package authors to set the +% headings of lists of floats the same way \KOMAScript{} classes do. Anselm +% Lingnau accepted this interface (but did not like may macro names, so these +% were changed in \KOMAScript{} 2.8g). But for \KOMAScript{} 3 I've needed a +% more powerful interface. So this became deprecated. Unfortunately Anselm is +% not willing to use the new \pkg*{tocbasic} for \pkg{float}. See +% \pkg*{scrhack} for a solution and how \pkg{float} could benefit from using +% \pkg*{tocbasic}. % \begin{macrocode} %<*body> \newcommand*{\float@listhead}[1]{% @@ -996,13 +1104,8 @@ \float@@listhead{#1}% \@mkboth{\MakeMarkcase{#1}}{\MakeMarkcase{#1}}% % \end{macrocode} -% \changes{v2.8q}{2001/11/14}{dynamische Anpassung an die Nummer}%^^A -% Dies ist der passende Ort, um die Breite, die für die Nummer des -% Gleitobjekts benötigt wird zu ermitteln und anzupassen, falls dies -% geünscht wird. Dazu findet eine lokale Umdefinierung von -% \cs{@starttoc} statt. Die Umdefinierung ist deshalb lokal, weil alle -% mir bekannten Verzeichnisse von Gleitobjekten innerhalb einer Gruppe -% ausgegeben werden. +% \changes{v2.8q}{2001/11/14}{support for dynamic number width} +% This is the best occasion to also add the code for the dynamic number width. % \begin{macrocode} \if@dynlist% \newcommand*{\scr@starttoc}{}% @@ -1013,14 +1116,13 @@ \fi } % \end{macrocode} -% \begin{macro}{\scr@float@listhead@warning} -% \changes{v3.01}{2008/11/13}{Neu (intern)}%^^A -% \changes{v3.12}{2013/09/25}{Text geändert}%^^A -% \changes{v3.12a}{2014/03/05}{Text korrigiert}%^^A +% \begin{macro}{\scr@float@listhead@warning,\scr@float@addtolists@warning} +% \changes{v3.01}{2008/11/13}{added} +% \changes{v3.12}{2013/09/25}{text changed} +% \changes{v3.12a}{2014/03/05}{text corrected} % \changes{v3.30}{2020/02/25}{spurious space at end of warning message -% removed}%^^A -% Die Warnung für die Verwendung von \cs{float@listhead}, dessen Definition -% irgendwann aus den Klassen verschwinden wird. +% removed} +% Here the warning messages, that are used for using the deprecated interface. % \begin{macrocode} \newcommand*{\scr@float@listhead@warning}{% \ClassWarning{\KOMAClassName}{% @@ -1037,16 +1139,6 @@ deprecated \string\float@listhead\space interface% }% } -% \end{macrocode} -% \end{macro} -% \begin{macro}{\scr@float@addtolists@warning} -% \changes{v3.01}{2008/11/13}{Neu (intern)}%^^A -% \changes{v3.12}{2013/09/25}{Text geändert}%^^A -% \changes{v3.12a}{2014/03/05}{Text korrigiert}%^^A -% \changes{v3.30}{2020/02/24}{Leerzeichen am Ende der Warnung entfernt}%^^A -% Die Warnung für die Verwendung von \cs{float@addtolists}, dessen -% Unterstützung irgendwann aus den Klassen verschwinden wird. -% \begin{macrocode} \newcommand*{\scr@float@addtolists@warning}{% \ClassWarningNoLine{\KOMAClassName}{% \string\float@addtolists\space detected!\MessageBreak @@ -1067,28 +1159,15 @@ } % % \end{macrocode} -% \end{macro} -% \end{macro} +% \end{macro}^^A \scr@float@listhead@warning,scr@float@addtolists@warning +% \end{macro}^^A \float@listhead % -% \begin{macro}{\listfigurename} -% \changes{v3.25}{2017/10/10}{\cs{renewcommand} statt \cs{newcommand}}%^^A -% \changes{v3.27}{2019/05/11}{auch als sprachabhängiger Bezeichner}%^^A -% \begin{macro}{\listtablename} +% \begin{command}{\listfigurename,\listtablename} +% \begin{command}{\listoflofname,\listoflotname, +% \listoflofentryname,\listoflotentryname} +% \changes{v3.00}{2008/07/03}{neu für Paket \pkg*{tocbasic}} % \changes{v3.25}{2017/10/10}{\cs{renewcommand} statt \cs{newcommand}}%^^A -% \changes{v3.27}{2019/05/11}{auch als sprachabhängiger Bezeichner}%^^A -% \begin{macro}{\listoflofname} -% \changes{v3.00}{2008/07/03}{neu für Paket \textsf{tocbasic}} -% \changes{v3.25}{2017/10/10}{\cs{renewcommand} statt \cs{newcommand}}%^^A -% \begin{macro}{\listoflotname} -% \changes{v3.00}{2008/07/03}{neu für Paket \textsf{tocbasic}} -% \changes{v3.25}{2017/10/10}{\cs{renewcommand} statt \cs{newcommand}}%^^A -% \begin{macro}{\listoflofentryname} -% \changes{v3.00}{2008/07/03}{neu für Paket \textsf{tocbasic}} -% \changes{v3.25}{2017/10/10}{\cs{renewcommand} statt \cs{newcommand}}%^^A -% \begin{macro}{\listoflotentryname} -% \changes{v3.00}{2008/07/03}{neu für Paket \textsf{tocbasic}} -% \changes{v3.25}{2017/10/10}{\cs{renewcommand} statt \cs{newcommand}}%^^A -% Die Namen der Verzeichnisse auch für das Paket \textsf{tocbasic}. +% The names used by \pkg*{tocbasic}. % \begin{macrocode} %<*body> \renewcommand*\listfigurename{List of Figures} @@ -1103,71 +1182,59 @@ \renewcommand*\listoflotentryname{\tablename} % % \end{macrocode} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} +% \end{command}^^A \listoflofname … \listoflotentryname +% \end{command}^^A \listfigurename,\listtablename % -% \begin{macro}{\listoffigures} -% \changes{v2.3h}{1995/01/21}{Verwendung von \cs{lof@heading}}%^^A -% \changes{v2.4k}{1996/12/13}{\cs{lof@heading} nicht nur bei -% \textsf{scrartcl}}%^^A -% \changes{v2.8l}{2001/08/16}{Gruppe eingefügt und \cs{parskip} auf -% 0 gesetzt}%^^A -% \changes{v2.8q}{2001/11/13}{\cs{@parskipfalse}\cs{@parskip@indent}}%^^A -% \changes{v2.95}{2004/11/05}{\cs{@parskipfalse} und \cs{@parskip@indent} -% ersetzt}%^^A -% \changes{v3.00}{2008/07/04}{Verwendung von \textsf{tocbasic}}%^^A -% \changes{v3.23}{2017/03/24}{Verwendung von \cs{ext@figure} statt -% \texttt{lof}}%^^A -% \changes{v3.25}{2017/10/10}{Wird bereits implizit von \cs{DeclareNewTOC} -% definiert}%^^A -% Die Ausgabe des Abbildungsverzeichnisses. -% \end{macro} +% \begin{command}{\listoffigures} +% \changes{v2.3h}{1995/01/21}{using \cs{lof@heading}} +% \changes{v2.4k}{1996/12/13}{\cs{lof@heading} for all classes} +% \changes{v2.8l}{2001/08/16}{group added an \len{parskip} set to 0} +% \changes{v2.8q}{2001/11/13}{\cs{@parskipfalse}\cs{@parskip@indent}} +% \changes{v2.95}{2004/11/05}{\cs{@parskipfalse} and \cs{@parskip@indent} +% replaced} +% \changes{v3.00}{2008/07/04}{using \pkg*{tocbasic}} +% \changes{v3.23}{2017/03/24}{using \cs{ext@figure} instead of \file{lof}} +% \changes{v3.25}{2017/10/10}{implicit definition by \cs{DeclareNewTOC}} +% The list of figures. +% \end{command}^^A \listoffigures % % \begin{macro}{\l@figure} -% \changes{v3.25}{2017/10/10}{Wird bereits implizit von \cs{DeclareNewTOC} -% im \texttt{default}-Stil definiert}%^^A -% Befehl zur Formatierung eines Verzeichniseintrags. -% \end{macro} +% \changes{v3.25}{2017/10/10}{implicit definition by \cs{DeclareNewTOC}} +% Entry command for the list of figures. +% \end{macro}^^A \l@figure % -% \begin{macro}{\listoftables} -% \changes{v2.3h}{1995/01/21}{Verwendung von \cs{lot@heading}}%^^A -% \changes{v2.4k}{1996/12/13}{\cs{lot@heading} nicht nur bei -% \textsf{scrartcl}}%^^A -% \changes{v2.8l}{2001/08/16}{Gruppe eingefügt und \cs{parskip} auf -% 0 gesetzt}%^^A -% \changes{v2.8q}{2001/11/13}{\cs{@parskipfalse}% -% \cs{@parskip@indent}}%^^A -% \changes{v2.95}{2004/11/05}{\cs{@parskipfalse} und \cs{@parskip@indent} -% ersetzt}%^^A -% \changes{v3.00}{2008/07/04}{Verwendung von \textsf{tocbasic}}%^^A -% \changes{v3.23}{2017/03/24}{Verwendung von \cs{ext@table} statt -% \texttt{lot}}%^^A -% \changes{v3.25}{2017/10/10}{Wird bereits implizit von \cs{DeclareNewTOC} -% definiert}%^^A -% Die Ausgabe des Tabellenverzeichnisses. -% \end{macro} +% \begin{command}{\listoftables} +% \changes{v2.3h}{1995/01/21}{using \cs{lot@heading}} +% \changes{v2.4k}{1996/12/13}{\cs{lot@heading} for all classes} +% \changes{v2.8l}{2001/08/16}{group added an \len{parskip} set to 0} +% \changes{v2.8q}{2001/11/13}{\cs{@parskipfalse}\cs{@parskip@indent}} +% \changes{v2.95}{2004/11/05}{\cs{@parskipfalse} and \cs{@parskip@indent} +% replaced} +% \changes{v3.00}{2008/07/04}{using \pkg*{tocbasic}} +% \changes{v3.23}{2017/03/24}{using \cs{ext@table} instead of \file{lot}} +% \changes{v3.25}{2017/10/10}{implicit definition by \cs{DeclareNewTOC}} +% The list of figures. +% \end{command}^^A \listoftables % % \begin{macro}{\l@table} -% \changes{v3.25}{2017/10/10}{Wird bereits implizit von \cs{DeclareNewTOC} -% im \texttt{default}-Stil definiert}%^^A -% \end{macro} +% \changes{v3.25}{2017/10/10}{implicit definition by \cs{DeclareNewTOC}} +% Entry command for the list of tables. +% \end{macro}^^A \l@table % -% -% \iffalse +% \begin{macrocode} % -% \fi -% +% \end{macrocode} +% % % \Finale -% +% \PrintChanges +% \endinput -% -% end of file `scrkernel-listsof.dtx' -%%% Local Variables: -%%% mode: doctex -%%% TeX-master: t -%%% End: +% Local Variables: +% mode: doctex +% ispell-local-dictionary: "en_US" +% eval: (flyspell-mode 1) +% TeX-master: t +% TeX-engine: luatex-dev +% eval: (setcar (or (cl-member "Index" (setq-local TeX-command-list (copy-alist TeX-command-list)) :key #'car :test #'string-equal) (setq-local TeX-command-list (cons nil TeX-command-list))) '("Index" "mkindex %s" TeX-run-index nil t :help "makeindex for dtx")) +% End: -- cgit v1.2.3