From e0c6872cf40896c7be36b11dcc744620f10adf1d Mon Sep 17 00:00:00 2001 From: Norbert Preining Date: Mon, 2 Sep 2019 13:46:59 +0900 Subject: Initial commit --- macros/eplain/source/xeplain.tex | 5568 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 5568 insertions(+) create mode 100644 macros/eplain/source/xeplain.tex (limited to 'macros/eplain/source') diff --git a/macros/eplain/source/xeplain.tex b/macros/eplain/source/xeplain.tex new file mode 100644 index 0000000000..ef1d96191b --- /dev/null +++ b/macros/eplain/source/xeplain.tex @@ -0,0 +1,5568 @@ +% xeplain.tex: macros for nonformatting. Written 1989--94 by (mostly) +% Karl Berry. Some additions/changes 1997--98 by Adam Lewenberg, +% with subsequent contributions from many people. +% These macros are in the public domain. +% +% This is the ``extended plain'' TeX format that's described in +% `eplain.texi', which you should have received with this file. +% It assumes that plain has been loaded. +% +% N.B.: A version number is defined at the beginning and end of this file; +% please change those numbers whenever the file is modified! +% And it's best to rename the file if you're going to distribute a +% modified version. +% +% Some macros were written and/or suggested by Paul Abrahams. +% Other sources (e.g., The TeXbook) are cited at the appropriate places. +% +%% @texfile{ +%% author = "Karl Berry, Steven Smith, Oleg Katsitadze, and others", +%% version = "REPLACE-WITH-VERSION", +%% date = "REPLACE-WITH-DATE", +%% filename = "xeplain.tex", +%% email = "bug-eplain@tug.org", +%% checksum = "REPLACE-WITH-CHECKSUM", +%% codetable = "ASCII", +%% supported = "yes", +%% docstring = "This file defines macros that extend and expand on +%% plain TeX. eplain.tex is xeplain.tex and the other +%% source files with comments stripped; see the original +%% files for author credits, etc. The original sources +%% can be found in Eplain sources in your TeX +%% distribution, on CTAN or on Eplain's home page at +%% http://tug.org/eplain. Please base diffs or +%% other contributions on xeplain.tex, not the +%% stripped-down eplain.tex.", +%% } +% +% +% Load eplain.tex only once (to avoid using up \new's). +% \eplain is defined at the end of this file, so we can test \eplain to +% detect whether eplain.tex has been loaded already or not. +% +% We use \expandafter because the merge script strips any lines +% with an \endinput. +% +\ifx\eplain\undefined + \let\next\relax +\else + \expandafter\let\expandafter\next\csname endinput\endcsname +\fi +\next +% The ifpdf.sty file included below was written by Heiko Oberdiek. +% See the complete source file (e.g., in this distribution) for +% comments. +%% [[[include ifpdf.sty]]] +% +% +% Category codes, etc. +% +\def\makeactive#1{\catcode`#1 = \active \ignorespaces}% +\chardef\letter = 11 +\chardef\other = 12 +% The following two macros were adopted from miniltx.tex of graphics. +\def\makeatletter{% + \edef\resetatcatcode{\catcode`\noexpand\@\the\catcode`\@\relax}% + \catcode`\@11\relax +}% +\def\makeatother{% + \edef\resetatcatcode{\catcode`\noexpand\@\the\catcode`\@\relax}% + \catcode`\@12\relax +}% +% +% +% So we can have user-inaccessible control sequences. +% +\edef\leftdisplays{\the\catcode`@}% +\catcode`@ = \letter +\let\@eplainoldatcode = \leftdisplays +% +% Save miniscule amounts of memory and time by writing \toks@ii instead +% of \toks2. +\toksdef\toks@ii = 2 +% +% +% This macro is defined in The TeXbook, but it never made it +% into plain TeX. \dospecials is defined there, though. +% +\def\uncatcodespecials{% + \def\do##1{\catcode`##1 = \other}% + \dospecials +}% +% +% +% Here is a way to do \let^^M = \cs, where the \let need not be global. +{% + \makeactive\^^M % + \long\gdef\letreturn#1{\let^^M = #1}% +}% +% +% +% Swallow parameters, etc. +% +\let\@eattoken = \relax % Define this, so \eattoken can be used in \edef. +\def\eattoken{\let\@eattoken = }% +\def\gobble#1{}% +\def\gobbletwo#1#2{}% +\def\gobblethree#1#2#3{}% +% +% We can't just use \empty as the identity function, since then outer +% braces which would supposedly delimit the argument would define a group. +\def\identity#1{#1}% +% +% True if #1 is the empty string, i.e., called like `\ifempty{}'. +% Use notes: +% So far, \ifempty works in the following cases: +% 1. \ifempty{}\message{empty}\else\message{not empty}\fi --> empty +% 2. \ifempty\undefined\message{empty}\else\message{not empty}\fi --> not empty +% But does NOT work in the case +% 3. \def\empty{} +% \ifempty\empty\message{empty}\else\message{not empty}\fi --> not empty +% Question: When should \ifempty be true? +\def\@emptymarkA{\@emptymarkB} +% The above line suggested by Stanislav Brabec. +\def\ifempty#1{\@@ifempty #1\@emptymarkA\@emptymarkB}% +\def\@@ifempty#1#2\@emptymarkB{\ifx #1\@emptymarkA}% +% +% True if #1 is an integer. From the UK List of TeX Frequently Asked +% Questions, http://www.tex.ac.uk/cgi-bin/texfaq2html. +\def\@gobbleminus#1{\ifx-#1\else#1\fi}% +\def\ifinteger#1{\ifcat_\ifnum9<1\@gobbleminus#1 _\else A\fi}% +% This is a convenience to be used in places where TeX might be +% skipping tokens, e.g., in conditionals. Usage: +% \if\isinteger{}% +% % +% \else +% % +% \fi +\def\isinteger{TT\fi\ifinteger}% +% +% Turn a definition into the characters that compose it. See +% ``Sanitizing control sequences under \write'', by Ron Whitney, TUGboat +% 11(4), p.620. +\def\@gobblemeaning#1:->{}% +\def\sanitize{\expandafter\@gobblemeaning\meaning}% +% +% +% From p.308 of the TeXbook. This cannot be used in places where TeX +% might be skipping tokens, e.g., in conditionals. +% +\def\ifundefined#1{\expandafter\ifx\csname#1\endcsname\relax}% +% +% +% \csname constructions come up an awful lot, so we save typing with the +% following. (But the extra macro expansion does take time, so we don't +% use these in frequently-executed code.) +% +\def\csn#1{\csname#1\endcsname}% +\def\ece#1#2{\expandafter#1\csname#2\endcsname}% +% +% +% \expandonce{TOKEN} abbreviates \expandafter\noexpand TOKEN. +% +\def\expandonce{\expandafter\noexpand}% +% +% +% Don't show our register allocations in the log. +% +\let\@plainwlog = \wlog +\let\wlog = \gobble +% +% +% Make it convenient to put newlines in error messages. +% +\newlinechar = `^^J +% +% +% Sometimes it is convenient to have everything in the transcript file +% and nothing on the terminal. We don't just call \tracingall here, +% since that produces some useless output on the terminal. +% +\def\gloggingall{\begingroup \globaldefs = 1 \loggingall \endgroup}% +\def\loggingall{\tracingcommands\tw@\tracingstats\tw@ + \tracingpages\@ne\tracingoutput\@ne\tracinglostchars\@ne + \tracingmacros\tw@\tracingparagraphs\@ne\tracingrestores\@ne + \showboxbreadth\maxdimen\showboxdepth\maxdimen +}% +% Show the complete contents of boxes. +% +\def\tracingboxes{\showboxbreadth = \maxdimen \showboxdepth = \maxdimen}% +% +% Don't trace anything, except restore \showbox... to plain's values. +% +\def\gtracingoff{\begingroup \globaldefs = 1 \tracingoff \endgroup}% +\def\tracingoff{\tracingonline\z@\tracingcommands\z@\tracingstats\z@ + \tracingpages\z@\tracingoutput\z@\tracinglostchars\z@ + \tracingmacros\z@\tracingparagraphs\z@\tracingrestores\z@ + \showboxbreadth5 \showboxdepth3 +}% +% +% +% Definitions to produce actual `{' (et al.) characters in an output +% file via \write. We omit the line break after the first }, since we +% have no comment character at that point. +% +\begingroup + \catcode`\{ = 12 \catcode`\} = 12 + \catcode`\[ = 1 \catcode`\] = 2 + \gdef\lbracechar[{]% + \gdef\rbracechar[}]% + \catcode`\% = \other + \gdef\percentchar[%]\endgroup +% +% +% Leave horizontal mode (if we're in it), then insert a penalty. +% And conversely. +% +\def\vpenalty{\ifhmode\par\fi \penalty}% +\def\hpenalty{\ifvmode\leavevmode\fi \penalty}% +% +% +% Make \else usable in \loop. From Victor Eijkhout's TeX by Topic (page +% 104). See also Alois Kabelschacht, TUGboat 8(2), page 184. +% +\def\iterate{% + \let\loop@next\relax + \body + \let\loop@next\iterate + \fi + \loop@next +}% +% +% +% Add #2 (which is expanded in an \edef) to the end of the definition of +% #1 (which must be a previously-defined control sequence). This is a +% way to construct simple lists. +% +\def\edefappend#1#2{% + \toks@ = \expandafter{#1}% + \edef#1{\the\toks@ #2}% +}% +% +% +% \allowhyphens, from TeXbook, p. 395. Allows following & preceding word +% to be hyphenated. +% +\def\allowhyphens{\nobreak\hskip\z@skip}% +% +% +% +% Hooks. +% +% \hookaction{HOOK}{TOKENS} adds TOKENS to the list of actions for +% HOOK. We avoid defining a \toks register for each hook, although +% maybe that isn't so important. +% +% \hookappend and \hookprepend add TOKENS specificially to the end or +% the beginning. When the argument is used, \toks@ will be the previous +% value of the hook, and \toks@ii the new tokens. +% +\long\def\hookprepend{\@hookassign{\the\toks@ii \the\toks@}}% +\long\def\hookappend{\@hookassign{\the\toks@ \the\toks@ii}}% +\let\hookaction = \hookappend % either one should be ok +% +% +% \@hookassign{LAST-DEF}{HOOK}{TOKENS} makes \toks@ the previous value +% of HOOK, and \toks@ii TOKENS, and then assigns the new value using +% LASTDEF. We store the hook in a control sequence \@HOOKhook. +% +\long\def\@hookassign#1#2#3{% + % Make \toks@ be the expansion (to one level) of \@HOOKhook, or empty. + \expandafter\ifx\csname @#2hook\endcsname \relax + % If \@HOOKhook was undefined, let it be empty. + \toks@ = {}% + \else + % Otherwise, expand it to one level. We can't just assign from + % \expandafter{\csname ...} since then the \toks register would + % contain the control sequence, not its definition. + \expandafter\let\expandafter\temp \csname @#2hook\endcsname + \toks@ = \expandafter{\temp}% + \fi + \toks2 = {#3}% Don't expand the argument all the way. + \ece\edef{@#2hook}{#1}% +}% +% +% +% \hookactiononce{HOOK}\CS adds `\global\let\CS=\relax' to the +% definition of \CS, then adds to HOOK. Thus, \CS is expanded the next +% time HOOK is called, but then it goes away. This only works if \CS is +% expandable, though. +% +\long\def\hookactiononce#1#2{% + \edefappend#2{\global\let\noexpand#2\relax} + \hookaction{#1}#2% +}% +% +% +% \hookrun{HOOKNAME} runs whatever actions have been defined for HOOK. +% +\def\hookrun#1{% + \expandafter\ifx\csname @#1hook\endcsname \relax \else + % Isn't this fun? We want to get rid of the \fi before expanding + % the actions, so that they can read what's coming up next. + \def\temp{\csname @#1hook\endcsname}% + \expandafter\temp + \fi +}% +% +% +% +% Properties a la Lisp. +% +% \setproperty{ATOM}{PROPNAME}{VALUE} defines the property PROPNAME on the +% ``atom'' ATOM to have VALUE. +% +\def\setproperty#1#2#3{\ece\edef{#1@p#2}{#3}}% +\def\setpropertyglobal#1#2#3{\ece\xdef{#1@p#2}{#3}}% +% +% +% \getproperty{ATOM}{PROPNAME} expands to the value of the property +% PROPNAME on ATOM, or to nothing (i.e., \empty), if the property isn't +% present. +% +\def\getproperty#1#2{% + \expandafter\ifx\csname#1@p#2\endcsname\relax + % then \empty + \else \csname#1@p#2\endcsname + \fi +}% +% +% +% +% Macros to support BibTeX are in a separate file, btxmac.tex. +% +% (They are maintained separately, too, by Oren Patashnik, +% opbibtex@cs.stanford.edu.) btxmac.tex also defines other macros we +% want to use and make available. +% +% But not all people want to read the BibTeX macros, because of either +% space or time considerations. Therefore, we look for \nobibtex, +% which, if defined, causes btxmac.tex not to be read. But we still +% have to get \tokstostring et al. defined---so eplain.tex contains +% those definitions, automatically edited in from btxmac.tex. All the +% documentation has been removed, so you must read btxmac.tex if you +% want the comments. +% +% +% We want to give a slightly different message than btxmac if no .aux +% file exists (unless the person using us has already define some +% message, possibly empty.) +% +\ifx\@undefinedmessage\@undefined + \def\@undefinedmessage + {No .aux file; I won't warn you about undefined labels.}% +\fi +% +% +% We use a token register to define all the BibTeX definitions, to avoid +% problems with the \if... constructions when they are conditionally +% read. +% +%% [[[here is the first set of common definitions from btxmac]]] +\toks0 = {% + %% [[[here are the BibTeX-specific definitions from btxmac]]] +}% +\ifx\nobibtex\@undefined \the\toks0 \fi +%% [[[here is the second set of common definitions from btxmac]]] +% +% Here are the control sequences that btxmac.tex defines using an @, +% because btxmac.tex wants to absolutely minimize the chance of +% conflicts. But these control sequence implement documented features +% of eplain, so we want to allow people to use them without the @. +% +\let\auxfile = \@auxfile +\let\for = \@for +\let\futurenonspacelet = \@futurenonspacelet +\def\iffileexists{\if@fileexists}% +\let\innerdef = \@innerdef +\let\innernewcount = \@innernewcount +\let\innernewdimen = \@innernewdimen +\let\innernewif = \@innernewif +\let\innernewwrite = \@innernewwrite +\let\linenumber = \@linenumber +\let\readauxfile = \@readauxfile +\let\spacesub = \@spacesub +\let\testfileexistence = \@testfileexistence +\let\writeaux = \@writeaux +% +% +% btxmac.tex defines \innerdef. Let's use it to make an abbreviation +% for \innerdef\inner{}. +% +\def\innerinnerdef#1{\expandafter\innerdef\csname inner#1\endcsname{#1}}% +% +% Use that in turn to make non-outer versions of the rest of plain TeX's +% allocation macros. (btxmac.tex already did a few of them.) +% +\innerinnerdef{newbox}% +\innerinnerdef{newfam}% +\innerinnerdef{newhelp}% +\innerinnerdef{newinsert}% +\innerinnerdef{newlanguage}% +\innerinnerdef{newmuskip}% +\innerinnerdef{newread}% +\innerinnerdef{newskip}% +\innerinnerdef{newtoks}% +% +% +% Besides doing a \write to the aux file, we also need to do an +% \immediate\write. +% +\def\immediatewriteaux#1{% + \ifx\noauxfile\@undefined + \immediate\write\@auxfile{#1}% + \fi +}% +% +% +% We want \biblabelprint to define hyperlink destination. For that, +% we save the label for the current bibliography entry from within +% \bblitemhook. +\def\bblitemhook#1{\gdef\@hlbblitemlabel{#1}}% +% +\def\biblabelprint#1{% + \noindent + \hbox to \biblabelwidth{% + \hldest@impl{bib}{\@hlbblitemlabel}% + \biblabelprecontents + \biblabelcontents{#1}% + \biblabelpostcontents + }% + \kern\biblabelextraspace +}% +% We want each citation item to be hyperlink to bibliography entry. +% To avoid unnecessary warnings about undefined destinations (e.g., +% from pdfTeX), produce the link only when .bbl file (which does the +% \hldest's) is present. +\def\eplainprintcitepreitem#1{\hlstart@impl{cite}{#1}}% +\def\eplainprintcitepostitem{\hlend@impl{cite}}% +% +% +\def\printcitepreitem#1{% + \testfileexistence[\bblfilebasename]{bbl}% + \iffileexists + \global\let\printcitepreitem\eplainprintcitepreitem + \global\let\printcitepostitem\eplainprintcitepostitem + \else + \global\let\printcitepreitem\gobble + \global\let\printcitepostitem\relax + \fi + \printcitepreitem{#1}% +}% +% +% btxmac.tex defines a \@for loop. We provide an alternative \For +% loop, extended to strip an optional leading space off list items. +\def\@Nnil{\@Nil}% +\def\@Fornoop#1\@@#2#3{}% +% +\def\For#1:=#2\do#3{% + \edef\@Fortmp{#2}% + \ifx\@Fortmp\empty \else + \expandafter\@Forloop#2,\@Nil,\@Nil\@@#1{#3}% + \fi +}% +% +\def\@Forloop#1,#2,#3\@@#4#5{\@Fordef#1\@@#4\ifx #4\@Nnil \else + #5\@Fordef#2\@@#4\ifx #4\@Nnil \else#5\@iForloop #3\@@#4{#5}\fi\fi +}% +% +\def\@iForloop#1,#2\@@#3#4{\@Fordef#1\@@#3\ifx #3\@Nnil + \let\@Nextwhile=\@Fornoop \else + #4\relax\let\@Nextwhile=\@iForloop\fi\@Nextwhile#2\@@#3{#4}% +}% +% \@Fordef\@@ defines COMMAND to the TEXT trimmed off +% optional space tokens at the beginning. Assume spaces are of +% category 10 (won't work when \obeyspaces is in effect). +\def\@Forspc{ }% +% +\def\@Fordef{\futurelet\@Fortmp\@@Fordef}% Peep at the next token. +% +\def\@@Fordef{% + \expandafter\ifx\@Forspc\@Fortmp % Next token is a space. + \expandafter\@Fortrim + \else + \expandafter\@@@Fordef + \fi +}% +% +\expandafter\def\expandafter\@Fortrim\@Forspc#1\@@{\@Fordef#1\@@}% +% +\def\@@@Fordef#1\@@#2{\def#2{#1}}% +% +% From texinfo.tex. Emulate eTeX's \scantokens with a temporary file +% in ordinary TeX. +\def\tmpfileextension{.tmp}% +\let\tmpfilebasename = \jobname +\ifx\eTeXversion\undefined + \innernewwrite\eplain@tmpfile + \def\scantokens#1{% + \toks@={#1}% + \immediate\openout\eplain@tmpfile=\tmpfilebasename\tmpfileextension + \immediate\write\eplain@tmpfile{\the\toks@}% + \immediate\closeout\eplain@tmpfile + \input \tmpfilebasename\tmpfileextension\relax + }% +\fi +% +% +% +% Macros that produce output. +% +% \obeywhitespace makes both end-of-lines and spaces in the input be +% respected in the output. Even spaces at the beginning of lines turn +% into blank space the size of the natural space of the current font. +% The reason why plain TeX's \obeyspaces does not do this last is that +% it produces actual space characters, i.e., glue, and glue is discarded +% at a(n output) line break, and so if line breaks in the input are +% line breaks in the output... +% +% Tabs are not affected; they will still produce glue (a single space). +% +\begingroup + \makeactive\^^M \makeactive\ % No spaces or ^^M's from here on. +\gdef\obeywhitespace{% +\makeactive\^^M\def^^M{\par\futurelet\next\@finishobeyedreturn}% +\makeactive\ \let =\ % +% +% The group we use here is the one \obeywhitespace must be enclosed in. +% If we don't do this, then if the obeyed stuff ends in a newline, the +% indent produced by the definition of ^^M will make that line indented, +% even if it isn't the end of the paragraph. +\aftergroup\@removebox% +\futurelet\next\@finishobeywhitespace% +}% +% +% \@finishobeywhitespace eats any spaces and/or the end-of-line after +% the \obeywhitespace command itself. The group here is the one that it +% itself creates. +% +\gdef\@finishobeywhitespace{{% +\ifx\next % +\aftergroup\@obeywhitespaceloop% +\else\ifx\next^^M% +\aftergroup\gobble% +\fi\fi}}% +% +% \@finishobeyedreturn is invoked at the end of every input line. We +% check if the next thing is also a return, and, if so, insert extra +% space. Then we start the next line. +% +\gdef\@finishobeyedreturn{% +\ifx\next^^M\vskip\blanklineskipamount\fi% +\indent% +}% +\endgroup +% +% The argument here is the space that we are supposed to eat after the +% \obeywhitespace command. +% +\def\@obeywhitespaceloop#1{\futurelet\next\@finishobeywhitespace}% +% +% +% This removes the last box, if it was a empty box of width \parindent. +% We might have been called inside a \vbox, so we have to test if we are +% in horizontal mode before using \lastbox. +% +\def\@removebox{% + \ifhmode + \setbox0 = \lastbox + \ifdim\wd0=\parindent + \setbox2 = \hbox{\unhcopy0}% Preserve \box0 so we can put it back. + \ifdim\wd2=0pt + % Don't put it back: it was an indentation box. + % This \ignorespaces ignores spaces after the group. + \ignorespaces + \else + \box0 % Put it back: it wasn't empty. + \fi + \else + \box0 % Put it back: it wasn't the right width. + \fi + \fi +}% +% +% We allow for extra (possibly negative) space when we hit blank lines. +% +\newskip\blanklineskipamount +\blanklineskipamount = 0pt +% +% +% A good way to print fractions in text when you don't want +% to use \over (which should be most of the time), and yet +% just `1/2' doesn't look right. (From the TeXbook, +% the answer to exercise 11.6, p.311.) +% +\def\frac#1/#2{\leavevmode + \kern.1em \raise .5ex \hbox{\the\scriptfont0 #1}% + \kern-.1em $/$% + \kern-.15em \lower .25ex \hbox{\the\scriptfont0 #2}% +}% +% +% +% The `e' just means `Eplain', as in `Eplain's hrule'. The advantage +% to using these is that you can change the default thickness. +% +\newdimen\hruledefaultheight \hruledefaultheight = 0.4pt +\newdimen\hruledefaultdepth \hruledefaultdepth = 0.0pt +\newdimen\vruledefaultwidth \vruledefaultwidth = 0.4pt +% +\def\ehrule{\hrule height\hruledefaultheight depth\hruledefaultdepth}% +\def\evrule{\vrule width\vruledefaultwidth}% +% +% +% The texnames.sty and path.sty files included below were originally +% written by Nelson Beebe and Philip Taylor, respectively. See the +% complete source files (e.g., in this distribution) for comments. +%% [[[include texnames.sty]]] +%% [[[include path.sty]]] +% +% +% More TeX logos. +% +% Adapted from tugboat.dtx. +\ifx\eTeX\undefined + \def\eTeX{\hbox{\mathsurround=0pt $\varepsilon$-\kern-.125em\TeX}}% +\fi +% +\ifx\ExTeX\undefined + \def\ExTeX{\hbox{\mathsurround=0pt + $\textstyle\varepsilon_{\kern-0.15em\cal{X}}$\kern-.2em\TeX}}% +\fi +% +% XeTeX require the graphics package for reflecting/rotating. From +% tugboat.dtx: "Also, at Barbara's suggestion, if the current font is +% slanted, we rotate by 180 instead of reflecting so there is at least +% a chance to look ok. (The magic values here seem more or less ok +% for \texttt{cmsl} and \texttt{cmti}.)". +\def\eplain@Xe@reflect#1{% + \ifx\reflectbox\undefined + \errmessage{A graphics package must be loaded for \string\XeTeX}% + \else + \ifdim \fontdimen1\font>0pt + \raise 1.75ex \hbox{\kern.1em\rotatebox{180}{#1}}\kern-.1em + \else + \reflectbox{#1}% + \fi + \fi +}% +\def\eplain@Xe#1{\leavevmode + \smash{\hbox{X% + \setbox0=\hbox{\TeX}\setbox2=\hbox{E}% + \lower\dp0\hbox{\raise\dp2\hbox{\kern-.125em\eplain@Xe@reflect{E}}}% + \kern-.1667em #1}}}% +\ifx\XeTeX\undefined + \def\XeTeX{\eplain@Xe\TeX}% +\fi +\ifx\XeLaTeX\undefined + \def\XeLaTeX{\eplain@Xe{\thinspace\LaTeX}}% +\fi +% +% +% A square box, suitable for being a marker in lists. +% +\def\blackbox{\vrule height .8ex width .6ex depth -.2ex \relax}% square bullet +% +% +% From p.311 of the TeXbook. +% +% Make an unfilled rectangle with the dimensions of \box0. #1 is the +% height of the rules, #2 the depth (i.e., the thicknesses). +% +\def\makeblankbox#1#2{% + \ifvoid0 + \errhelp = \@makeblankboxhelp + \errmessage{Box 0 is void}% + \fi + \hbox{\lower\dp0 + \vbox{\hidehrule{#1}{#2}% + \kern -#1% overlap rules + \hbox to \wd0{\hidevrule{#1}{#2}% + \raise\ht0\vbox to #1{}% vrule height + \lower\dp0\vtop to #1{}% vrule depth + \hfil\hidevrule{#2}{#1}% + }% + \kern-#1\hidehrule{#2}{#1}% + }% + }% +}% +% +\newhelp\@makeblankboxhelp{Assigning to the dimensions of a void^^J% + box has no effect. Do `\string\setbox0=\string\null' before you^^J% + define its dimensions.}% +% +% +% Produce an hrule with height #1 and depth #2, and insert kerning so it +% doesn't change the current position. +% +\def\hidehrule#1#2{\kern-#1\hrule height#1 depth#2 \kern-#2}% +% +% Produce a vrule with width #1+#2, kerning so as not to change the +% current position. +% +\def\hidevrule#1#2{% + \kern-#1% + \dimen@=#1\advance\dimen@ by #2% + \vrule width\dimen@ + \kern-#2% +}% +% +% +% The \boxit macro from the TeXbook, trivially generalized to allow +% something other than 3pt around the TeX box being boxed. +% +\newdimen\boxitspace \boxitspace = 3pt +% +\long\def\boxit#1{% + \vbox{% + \ehrule + \hbox{% + \evrule + \kern\boxitspace + \vbox{\kern\boxitspace \parindent = 0pt #1\kern\boxitspace}% + \kern\boxitspace + \evrule + }% + \ehrule + }% +}% +% +% +% Produce the written-out form of a number. +% +\def\numbername#1{\ifcase#1% + zero% + \or one% + \or two% + \or three% + \or four% + \or five% + \or six% + \or seven% + \or eight% + \or nine% + \or ten% + \or #1% + \fi +}% +% +% The following arrow macros were written by Steven Smith. See arrow.tex. +\let\@plainnewif = \newif +\let\@plainnewdimen = \newdimen +\let\newif = \innernewif +\let\newdimen = \innernewdimen +\edef\@eplainoldandcode{\the\catcode`& }% +\catcode`& = 11 +\toks0 = {% + %% [[[include arrow1]]] +}% +\catcode`& = 4 +\toks2 = {% + %% [[[include arrow2]]] +}% +\let\newif = \@plainnewif +\let\newdimen = \@plainnewdimen +\ifx\noarrow\@undefined \the\toks0 \the\toks2 \fi +\catcode`& = \@eplainoldandcode +% +% +% +% Environments. +% +% Define an ``environment'': arbitrary text, enclosed by \begingroup and +% \endgroup. But you get to label the group, so that if you forget an +% \environment or an \endenvironment, you will probably get an error +% message about it. +% +% Since the environment names appear in \errmessage arguments, it's best +% to keep them to `letter' and `other' characters. I suppose we could +% call \tokstostring to allow more general labels. +% +% These macros improve slightly on the answer to exercise 5.7 in +% The TeXbook, by making some checks on \begingroup and \endgroup, as +% well as just making sure \environment and \endenvironment's match. +% +% +\def\environment#1{% + \ifx\@groupname\@undefined\else + % This gets invoked if we have two \environments (and no matching + % \endenvironment to the first) with an \endgroup in between. + \errhelp = \@unnamedendgrouphelp + \errmessage{`\@groupname' was not closed by \string\endenvironment}% + \fi + % Use \edef in case we are passed a macro that contains the name, + % instead of the name. + \edef\@groupname{#1}% + \begingroup + \let\@groupname = \@undefined +}% +% +\def\endenvironment#1{% + \endgroup + \edef\@thearg{#1}% + \ifx\@groupname\@thearg + \else + \ifx\@groupname\@undefined + % Unfortunately, one gets an `extra \endgroup' message before + % seeing this. But we have to restore \@groupname, so I see no + % alternative. + \errhelp = \@isolatedendenvironmenthelp + \errmessage{Isolated \string\endenvironment\space for `#1'}% + \else + \errhelp = \@mismatchedenvironmenthelp + \errmessage{Environment `#1' ended, but `\@groupname' started}% + \endgroup % Probably a typo in the names. + \fi + \fi + \let\@groupname = \@undefined +}% +% +\newhelp\@unnamedendgrouphelp{Most likely, you just forgot an^^J% + \string\endenvironment. Maybe you should try inserting another^^J% + \string\endgroup to recover.}% +% +\newhelp\@isolatedendenvironmenthelp{You ended an environment X, but^^J% + no \string\environment{X} to start it is anywhere in sight.^^J% + You might also be at an \string\endenvironment\space that would match^^J% + a \string\begingroup, i.e., you forgot an \string\endgroup.}% +% +\newhelp\@mismatchedenvironmenthelp{You started an environment named X, but^^J% + you ended one named Y. Maybe you made a typo in one^^J% + or the other of the names?}% +% +% +% The above sort of environment allows nesting. But environments +% shouldn't always be allowed to nest (like the \flushright, +% \flushleft, and \center ones defined below). Here are some macros to +% help deal with that. +% +% \checkenv goes at the beginning of a macro that is +% going to define the environment. +% +\newif\ifenvironment +\def\checkenv{\ifenvironment \errhelp = \@interwovenenvhelp + \errmessage{Interwoven environments}% + \egroup \fi +}% +% +\newhelp\@interwovenenvhelp{Perhaps you forgot to end the previous^^J% + environment? I'm finishing off the current group,^^J% + hoping that will fix it.}% +% +% +% +% Mathematics displays. +% +% By default, TeX centers displayed material. To get left-justified +% displays, say \leftdisplays. To go back to centered displays, say +% \centereddisplays. +% +% This is based on an approach developed by Donald Arseneau, +% asnd@triumfrg.bitnet. +% +\newtoks\previouseverydisplay +% Here we want to make ordinary math displays flush left, +% indented by the dimen \leftdisplayindent, which defaults +% to \parindent. +% +% How do you want the first column aligned? +\let\@leftleftfill\relax % as it was +%\let\@leftleftfill\hfill % makes more sense, but could be too ugly +% +% Surely it makes more sense to not sum \leftdisplayindent+\parindent +\newdimen\leftdisplayindent \leftdisplayindent=\parindent +\newif\if@leftdisplays +% +\def\leftdisplays{% + \if@leftdisplays\else + \previouseverydisplay = \everydisplay + \everydisplay = {\the\previouseverydisplay \leftdisplaysetup}% + \let\@save@maybedisableeqno = \@maybedisableeqno + \let\@saveeqno = \eqno + \let\@saveleqno = \leqno + \let\@saveeqalignno = \eqalignno + \let\@saveleqalignno = \leqalignno + \let\@maybedisableeqno = \relax + \def\eqno{\hfill\textstyle\enspace}% + \def\leqno{% + \hfill + \hbox to0pt\bgroup + \kern-\displaywidth + % was: \kern-\displayindent % really \displayindent? + \kern-\leftdisplayindent % I'll use just \leftdisplayindent + $\aftergroup\@leftleqnoend % inserted after ending $ + }% + \@redefinealignmentdisplays + \@leftdisplaystrue + \fi +}% +\newbox\@lignbox +\newdimen\disprevdepth + +% In order to use $$ for left-aligned equation we have to +% put something like \leftline{$\displaystyle ...$} in the +% display. Then \eqno works basically like \hfill. +% In order to make $$\eqalignno{...}$$ work as +% expected, including page breaks, we have to get rid of the +% horizontal box, and un-vbox the alignment. Sadly, \unvbox +% does not perform baselineskip handing, so we need to get +% the \prevdepth ourselves...in order to get the prevdepth, +% the outermost display must be an alignment display. +% Therefore, an ordinary $$ a=b $$ becomes: +% $$\halign{#\cr\noalign{\disprevdepth = \prevdepth +% \leftline{$\displaystyle a=b$} +% }}$$ +% +\def\centereddisplays{% + % If \leftdisplays hasn't been called, don't try to restore all the + % stuff it changes. + % + \if@leftdisplays + \everydisplay = \previouseverydisplay + \let\@maybedisableeqno = \@save@maybedisableeqno + \let\eqno = \@saveeqno + \let\leqno = \@saveleqno + \let\eqalignno = \@saveeqalignno + \let\leqalignno = \@saveleqalignno + \@leftdisplaysfalse + \fi +}% +% +\def\leftdisplaysetup{% +% surely not this *and* \leftdisplayindent? : \dimen@ = \parindent + \dimen@ = \leftdisplayindent + \advance\dimen@ by \leftskip + \advance\displayindent by \dimen@ + \advance\displaywidth by -\dimen@ +% this outermost alignment doesn't align anything. + \halign\bgroup##\cr \noalign\bgroup + \disprevdepth = \prevdepth + \setbox\z@ = \hbox to\displaywidth\bgroup + % Why strut?? \strut + % Why this?? \advance\hsize by -\displayindent + $\displaystyle + \aftergroup\@lefteqend % inserted after ending $ +} +% +\def\@lefteqend{% gets inserted between the ending $$ + \hfil\egroup% end box 0 + \@putdisplay} +% gets inserted between trailing $$. +\def\@leftleqnoend{\hss \egroup $}% end the \hbox to 0pt for \leqno, restore $ +% +\def\@putdisplay{% + \ifvoid\@lignbox % Ordinary display; use it. + \moveright\displayindent\box\z@ + \else % alignment display; unwrap alignment + \prevdepth = \dp\@lignbox % affects the skip *below* + \unvbox\@lignbox + \fi + \egroup\egroup % end \noalign, end outer \halign + $% restore first $ of trailing $$ +} +% +\def\@redefinealignmentdisplays{% + \def\displaylines##1{ + \global\setbox\@lignbox\vbox{% + \prevdepth = \disprevdepth + \displ@y + \tabskip\displayindent + \halign{\hbox to\displaywidth + {$\@lign\displaystyle####\hfil$\hfil}\crcr + ##1\crcr}}}% + \def\eqalignno##1{% + \def\eqno{&}% + \def\leqno{&}% + \global\setbox\@lignbox\vbox{% + \prevdepth = \disprevdepth + \displ@y + \advance\displaywidth by \displayindent + \tabskip\displayindent + \halign to\displaywidth{% + \hfil $\@lign\displaystyle{####}$\@leftleftfill\tabskip\z@skip + &$\@lign\displaystyle{{}####}$\hfil\tabskip\centering + &\llap{$\@lign####$}\tabskip\z@skip\crcr + ##1\crcr}}}% + \def\leqalignno##1{% + \def\eqno{&}% + \def\leqno{&}% + \global\setbox\@lignbox\vbox{% + \prevdepth = \disprevdepth + \displ@y + \advance\displaywidth by \displayindent + \tabskip\displayindent + \halign to\displaywidth{% + \hfil $\@lign\displaystyle{####}$\@leftleftfill\tabskip\z@skip + &$\@lign\displaystyle{{}####}$\hfil\tabskip\centering + &\kern-\displaywidth +% \showthe\displayindent \showthe\leftdisplayindent + \rlap{\kern\displayindent \kern-\leftdisplayindent$\@lign####$}% + \tabskip\displaywidth\crcr + ##1\crcr}}}% +}% +% +% \noalign is typically used to insert a few words (`and', for example) +% between two aligned equations. So I don't think the \noaligned +% material should be indented. Since \noalign takes , we would end up with double indentation, anyway: one +% because we're indenting the whole display, and one at the start of the +% . (If you want to change any of this, you can put something in +% \@everynoalign.) So, we use this definition for \noalign in a +% left-justified \eqalignno: +% +\let\@primitivenoalign = \noalign +\newtoks\@everynoalign +\def\@lefteqalignonoalign#1{% + \@primitivenoalign{% + % Is it right to set \leftskip=0pt first, thus perhaps making this + % work in lists and so forth? We just compensate for the other ways + % the display is indented here. + \advance\leftskip by -\parindent + \advance\leftskip by -\leftdisplayindent + \parskip = 0pt + % + % We use \parindent=0pt instead of \noindent because the latter + % starts unrestricted horizontal mode, which means the alignment + % we're inside will wind up being as wide as the page. When the arg + % is just vertical material, this is wrong. For example, using + % \matrix inside \eqalignno fails if \noindent is used. + \parindent = 0pt + \the\@everynoalign + #1% + }% +}% +% +% +% +% Time macros. +% +% TeX sets \time, \day, \month, and \year when it begins. (And does not +% update them as it runs!) +% +% +% \monthname produces the name of the month, abbreviated to three +% letters. The primitive \month should never be zero. +% +\def\monthname{% + \ifcase\month + \or Jan\or Feb\or Mar\or Apr\or May\or Jun% + \or Jul\or Aug\or Sep\or Oct\or Nov\or Dec% + \fi +}% +% +% \fullmonthname is like \monthname, except it doesn't abbreviate. +% +\def\fullmonthname{% + \ifcase\month + \or January\or February\or March\or April\or May\or June% + \or July\or August\or September\or October\or November\or December% + \fi +}% +% +% \timestring produces the current time, in a format like `1:14 p.m.'. +% +\def\timestring{\begingroup + \count0 = \time + \divide\count0 by 60 + \count2 = \count0 % The hour, from zero to 23. + % + \count4 = \time + \multiply\count0 by 60 + \advance\count4 by -\count0 % The minute, from zero to 59. + % But we need the minutes with a leading zero, if necessary. + \ifnum\count4<10 + \toks1 = {0}% + \else + \toks1 = {}% + \fi + % + % Convert the hour into `a.m.' or `p.m.', and make it mod 12. + \ifnum\count2<12 + \toks0 = {a.m.}% + \else + \toks0 = {p.m.}% + \advance\count2 by -12 + \fi + % + % If it's midnight, call it `12', not `0'. + \ifnum\count2=0 + \count2 = 12 + \fi + % + % Produce the output. + \number\count2:\the\toks1 \number\count4 \thinspace \the\toks0 +\endgroup}% +% +% +% \timestamp produces a text string for the whole thing like +% `23 Apr 1964 1:14 p.m.'. +% +\def\timestamp{\number\day\space\monthname\space\number\year\quad\timestring}% +% +% +% \today produces the current date, as in `23 April 1964'. +% +\def\today{\the\day\ \fullmonthname\ \the\year}% +% +% +% +% (Typographical) lists. +% +% These macros can produce numbered or unnumbered lists. +% +% You can change the spacing by assigning new values to these registers. +% They are used by both kinds of lists. \listleftindent is relative to +% the current paragraph indentation, while \listrightindent is an +% absolute value. I do this for two reasons: (1) it is more useful, if not +% more ``logical'', to make list indentation depend on the paragraph +% indentation; (2) footnotes do not work if \parindent is zero, and +% having a footnote in a list item is perfectly reasonable. +% +% If you change \baselineskip and want \abovelistskip and \belowlistskip +% to retain their meanings here, you will have to reassign to them. The +% \baselineskip here is the value at the time eplain.tex is read, i.e., +% 12pt (most likely). +% +% If the items in your lists are very long, you might want to +% make \interitemskipamount nonzero. +% +\newskip\abovelistskipamount \abovelistskipamount = .5\baselineskip + \newcount\abovelistpenalty \abovelistpenalty = 10000 + \def\abovelistskip{\vpenalty\abovelistpenalty \vskip\abovelistskipamount}% +\newskip\interitemskipamount \interitemskipamount = 0pt + \newcount\belowlistpenalty \belowlistpenalty = -50 + \def\belowlistskip{\vpenalty\belowlistpenalty \vskip\belowlistskipamount}% +\newskip\belowlistskipamount \belowlistskipamount = .5\baselineskip + \newcount\interitempenalty \interitempenalty = 0 + \def\interitemskip{\vpenalty\interitempenalty \vskip\interitemskipamount}% +\newdimen\listleftindent \listleftindent = 0pt +\newdimen\listrightindent \listrightindent = 0pt +\let\listmarkerspace = \enspace +% +% To do arbitrary things at the start of each list: +\newtoks\everylist +% +% If you want no space between items for a particular list +% (perhaps because the items in it are short), you can say, +% e.g., \numberedlist\listcompact. +% +\def\listcompact{\interitemskipamount = 0pt \relax}% +% +% This is called to set up the parameters by both sorts of lists. +% Because we set \rightskip, we finish off the current paragraph. +% +\newdimen\@listindent +% +\def\beginlist{% + % Insert the space above this list, before we change \leftskip + % (because the \vskip in here might be what ends the paragraph). + \abovelistskip + % + \@listindent = \parindent + \advance\@listindent by \listleftindent + % + % \leftskip shifts nested lists to the right on the page. + \advance\leftskip by \@listindent + \advance\rightskip by \listrightindent + % + % We always need \itemnumber, so we can know whether an item is the + % first one or not. + \itemnumber = 1 + % + \the\everylist +}% +% +% A list item, for both kinds of lists. +% +\def\li{\@getoptionalarg\@finli}% +\def\@finli{% + % Save \@optionalarg in case \interitemskip garble it. + \let\@lioptarg\@optionalarg + % Write xref definition but do not define hyperlink destination + % (\printitem will do it). + \ifx\@lioptarg\empty \else + \begingroup + \@@hldestoff + \expandafter\writeitemxref\expandafter{\@lioptarg}% + \endgroup + \fi + \ifnum\itemnumber=1 \else \interitemskip \fi + % Add hyperlink destination in front of \marker before doing \printitem. + \begingroup + \ifx\@lioptarg\empty \else + \toks@ = \expandafter{\@lioptarg}% + \let\li@nohldest@marker\marker + \edef\marker{\noexpand\hldest@impl{li}{\the\toks@}\noexpand\li@nohldest@marker}% + \fi + \printitem + \endgroup + \advance\itemnumber by 1 + \advance\itemletter by 1 + \advance\itemromannumeral by 1 + % + % Just in case somebody creeps in with an argument or something. + \ignorespaces +}% +% +% \writeitemxref{LABEL} writes out a definition for LABEL to be \marker +% for the aux file. +% +\def\writeitemxref#1{\definexref{#1}\marker{item}}% +% +% \printitem is used to print items by both sorts of lists. A \par gets +% produced before every item -- even the first one. We also want to +% make paragraphs after the first appear to be indented -- i.e., they +% will have double indentation. It is usually bad exposition to have +% lists with multiparagraph items, but sometimes it is unavoidable. +% +\def\printitem{% + \par + \nobreak + \vskip-\parskip + \noindent + \printmarker\marker +}% +% +% Output the list marker. +% +\def\printmarker#1{\llap{\marker \enspace}}% +% +% Common ending. +% +\def\endlist{\belowlistskip}% +% +% +% \numberedlist produces items which are numbered sequentially, starting +% from one. You start items with \li (`list item'). End the list with +% \endnumberedlist. +% +% A nested \numberedlist produces items labelled `(a)', `(b)', etc. A +% doubly (and deeper) nested \numberedlist labels items with `*'. +% +% These registers keep track of where we are. +% +\newcount\numberedlistdepth +\newcount\itemnumber +\newcount\itemletter +\newcount\itemromannumeral +% +\def\numberedmarker{% + \ifcase\numberedlistdepth + (impossible)% + \or \printitemnumber + \or \printitemletter + \or \printitemromannumeral + \else *% + \fi +}% +% +% These produce the text of the labels. We use \the\itemletter so that +% the value will expand. +% +\def\printitemnumber{\number\itemnumber}% +\def\printitemletter{\char\the\itemletter}% +\def\printitemromannumeral{\romannumeral\itemromannumeral}% +\def\numberedprintmarker#1{\llap{#1) \listmarkerspace}}% +% +\def\numberedlist{\environment{@numbered-list}% + % This is set back to zero by getting to the end of the group. + \advance\numberedlistdepth by 1 + \itemletter = `a + \itemromannumeral = 1 + \beginlist + \let\marker = \numberedmarker + \let\printmarker = \numberedprintmarker +}% +% +\def\endnumberedlist{% + \par + \endenvironment{@numbered-list}% + \endlist +}% +% +% Allow synonyms for \numberedlist. +\let\orderedlist = \numberedlist +\let\endorderedlist = \endnumberedlist +% +% +% +% \unorderedlist produces items which are labelled with bullets. You +% start an item with \li, just as with numbered lists. You end the list +% with \endunorderedlist. +% +% A nested \unorderedlist produces items labelled with em-dashes. A +% doubly (and deeper) nested \unorderedlist uses `*'. +% +\newcount\unorderedlistdepth +% +\def\unorderedmarker{% + \ifcase\unorderedlistdepth + (impossible)% + \or \blackbox + \or ---% + \else *% + \fi +}% +\def\unorderedprintmarker#1{\llap{#1\listmarkerspace}}% +% +\def\unorderedlist{\environment{@unordered-list}% + \advance\unorderedlistdepth by 1 + \beginlist + \let\marker = \unorderedmarker + \let\printmarker = \unorderedprintmarker +}% +% +\def\endunorderedlist{% + \par + \endenvironment{@unordered-list}% + \endlist +}% +% +% +% +% Verbatim listing. +% +% ... well, almost verbatim. We assume the font \tt has all the +% characters that will appear. Control characters, except for tabs and +% form feeds (and returns) won't produce anything useful. Tabs produce +% a fixed amount of space, and form feeds produce a page break. +% +% This is based on Knuth's ideas in Appendix D of the TeXbook, p. 380. +% The argument should be a filename. +% +% if you need to do something more for your particular fonts and/or +% environment before the file is input, give a definition to +% \setuplistinghook. If you want line numbers on the output, you can +% say \let\setuplistinghook = \linenumberedlisting. To omit last +% (empty) line of input, say \let\setuplistinghook = \nolastlinelisting. +% (This works with line numbers, too, but only if \printlistinglineno +% consists of boxes only.) +\def\listing#1{% + \par \begingroup + \@setuplisting + \setuplistinghook + \input #1 + \endgroup +}% +% +\let\setuplistinghook = \relax +% +\def\linenumberedlisting{% + \ifx\lineno\undefined \innernewcount\lineno \fi + \lineno = 0 + \everypar = {\advance\lineno by 1 \printlistinglineno}% +}% +\def\printlistinglineno{\llap{[\the\lineno]\quad}}% +% Remove the last line by removing all boxes (indentation \hbox and/or +% line number from \everypar). +\def\nolastlinelisting{\aftergroup\@removeboxes}% +% Remove boxes until we remove all of them, or until we +% encounter something other than a box. +\def\@removeboxes{% + \setbox0 = \lastbox + \ifvoid0 + \ignorespaces % Ignore spaces after the \obeywhitespace's group. + \else + \expandafter\@removeboxes + \fi +}% +% +% +% +% \uncatcodespecials must come before \obeywhitespace, lest a space +% character in the input produce character 32 from the \tt font. +% Ensure ^^L is active and non-outer. +% +{% + \makeactive\^^L + \let^^L = \relax + \gdef\@setuplisting{% + \uncatcodespecials + \obeywhitespace + \makeactive\` + \makeactive\^^I + \makeactive\^^L + \def^^L{\vfill\break}% + \parskip = 0pt + \listingfont + }% +}% +\def\listingfont{\tt}% +% +% Give definitions to the characters we want to be special. +% +% Do ` separately, so can use ` in the \catcode commands elsewhere. +% +{% + \makeactive\` + \gdef`{\relax\lq}% Defeat ligatures. +}% +{% + \makeactive\^^I + \gdef^^I{\hskip8\fontdimen2\font \relax}% +}% +% +% +% \verbatim ... |endverbatim typesets the ... in typewriter. To produce a | +% in the ..., use ||. This macro was contributed by beebe@math.utah.edu. +% Generalized to characters other than | by dorai@cs.rice.edu. +% +\def\verbatimescapechar#1{% + \gdef\@makeverbatimescapechar{% + \@makeverbatimdoubleescape #1% + \catcode`#1 = 0 + }% +}% +\def\@makeverbatimdoubleescape#1{% + \catcode`#1 = \other + \begingroup + \lccode`\* = `#1% + \lowercase{\endgroup \ece\def*{*}}% +}% +\verbatimescapechar\| % initially escapechar is | +% +\def\verbatim{\begingroup + \uncatcodespecials + \makeactive\` % make space character a single space, not stretchable + \@makeverbatimescapechar + \tt\obeywhitespace} +\let\endverbatim = \endgroup +% +% +% +% Table of contents, list of figures, etc. +% +% Entries for the table of contents are recorded in \jobname.toc, which +% we open for writing at the first \writetocentry. Actually, we use +% \tocfilebasename for the root of the filename to read; \jobname is +% the default. +% +\def\definecontentsfile#1{% + \ece\innernewwrite{#1file}% + \ece\innernewif{if@#1fileopened}% + \ece\let{#1filebasename} = \jobname + \ece\def{open#1file}{\opencontentsfile{#1}}% + \ece\def{write#1entry}{\writecontentsentry{#1}}% + \ece\def{writenumbered#1entry}{\writenumberedcontentsentry{#1}}% + \ece\def{writenumbered#1line}{\writenumberedcontentsline{#1}}% + \ece\innernewif{ifrewrite#1file} \csname rewrite#1filetrue\endcsname + \ece\def{read#1file}{\readcontentsfile{#1}}% +}% +% +% We provide \opentocfile, \readtocfile, etc., by default. +\definecontentsfile{toc}% +% +% And `toc' is just the argument to this macro. +\def\opencontentsfile#1{% + \csname if@#1fileopened\endcsname \else + \ece{\immediate\openout}{#1file} = \csname #1filebasename\endcsname.#1 + \ece\global{@#1fileopenedtrue}% + \fi +}% +% +% \writetocentry#1#2 produces a line in the .toc file that +% looks like: +% \toc#1entry{#2}{page number} +% e.g., +% \tocchapterentry{Introduction}{2} +% would be written by +% \writetocentry{chapter}{Introduction} +% if the chapter started on page two. +% +% Thus, #1 is intended to be something like `chapter' or `section', #2 +% to be the text of the title. +% +% One special case is for #1 to be an integer (once fully expanded). +% If it is, we produce a line in the .toc file that looks like: +% \tocentry{#1}{#2}{page number} +% This might be useful if you want to write one generic \tocentry +% macro to format all TOC entries on the basis of their depth (#1). +% +% Of course, if you want, you can \write\tocfile yourself with whatever +% you like. In that case, you must also call \opentocfile. +% +% By the way, it would be wrong to put a \percentchar at the end of the +% output line. Then, when the .toc file is read, if each line is turned +% into a \leftline, say, there would be no legal breakpoint between the +% boxes, and one extremely long line would result. +% +% `toc' is the first argument to this; \writetocentry is defined by +% \definecontentsfile. +\def\writecontentsentry#1#2#3{\writenumberedcontentsentry{#1}{#2}{#3}{}}% +% +% Sometimes you want the control sequence to take another number (e.g., +% a chapter number) as a parameter. (Although you can pass anything you +% want as the third parameter, naturally.) The third parameter is +% expanded at the point of the \writenumberedtocentry, not when the +% \write actually happens. This makes the usual case---the third +% parameter being \the\someregister---work. +% +% For example: +% \writenumberedtocentry{chapter}{The second chapter}{2} +% would produce: +% \tocchapterentry{The second chapter}{2}{14} +% +% if the second chapter started on page 14. +% +% `toc' is the first argument, as above. +\def\writenumberedcontentsentry#1#2#3#4{% + \csname ifrewrite#1file\endcsname + % Set \toks0 to the initial part (command name and possible PART argument). + \writenumberedcontents@cmdname{#1}{#2}% + % + \def\temp{#3}% the text + % + % Usually #4 is just `\the\register', which we want to expand. But + % if it's not a number at all -- e.g., if it's an author's name, we + % don't want to expand control sequences for accents and the like. + % So we play some games here. + \toks2 = \expandafter{#4}% + \edef\cs{\the\toks2}% + \edef\@wr{% + \write\csname #1file\endcsname{% + \the\toks0 % the \toc...entry control sequence + {\sanitize\temp}% the text + \ifx\empty\cs\else {\sanitize\cs}\fi % a secondary number, or nothing + {\noexpand\folio}% the page number + }% + }% + \@wr + \fi + \ignorespaces +}% +% This is very similar to \writenumberedcontentsentry, differing only +% in the order of parameters it takes and writes for the +% \toc...entry control sequence. #3 is the chapter (section, etc.) +% number, and #4 is the text. +\def\writenumberedcontentsline#1#2#3#4{% + \csname ifrewrite#1file\endcsname + % Set \toks0 to the initial part (command name and possible PART argument). + \writenumberedcontents@cmdname{#1}{#2}% + % + \def\temp{#4}% the text + % + % Usually #3 is just `\the\register', which we want to expand. But + % if it's not a number at all -- e.g., if it's an author's name, we + % don't want to expand control sequences for accents and the like. + % So we play some games here. + \toks2 = \expandafter{#3}% + \edef\cs{\the\toks2}% + \edef\@wr{% + \write\csname #1file\endcsname{% + \the\toks0 % the \toc...entry control sequence + \ifx\empty\cs\else {\sanitize\cs}\fi % a secondary number, or nothing + {\sanitize\temp}% the text + {\noexpand\folio}% the page number + }% + }% + \@wr + \fi + \ignorespaces +}% +% This is the common part of \writenumberedcontentsentry and +% \writenumberedcontentsline. It takes `toc' and PART arguments, +% opens toc file and sets \toks0 to `\tocentry{PART}' (if PART is an +% integer) or `\tocPARTentry' (otherwise). +\def\writenumberedcontents@cmdname#1#2{% + \csname open#1file\endcsname + \edef\temp{#2}% Expand PART fully and see if this produced an integer. + \expandafter\if\expandafter\isinteger\expandafter{\temp}% + \toks0 = {\expandafter\noexpand \csname #1entry\endcsname}% + \edef\temp{\the\toks0{\temp}}% + \toks0 = \expandafter{\temp}% + \else + \toks0 = {\expandafter\noexpand \csname #1#2entry\endcsname}% + \fi +}% +% +% The entries are read in when the user invokes \readtocfile (which +% should be before the first \writetocentry). We do not open the .toc +% file to allow reading it in twice to make a short contents or some +% such. This should not cause any problems because each of +% \writecontentsentry and \writenumberedcontentsentry open the .toc +% file for writing (i.e., empty it) before trying to write to it. +\def\readcontentsfile#1{% + \edef\temp{% + \noexpand\testfileexistence[\csname #1filebasename\endcsname]{#1}% + }\temp + \if@fileexists + \input \csname #1filebasename\endcsname.#1\relax + \fi +}% +% +% Here are some sample definitions of the \toc...entry macros. Perhaps +% you or your book designer can come up with a better way of handling +% contents than leaders. These definitions are just examples, not +% something you might want to actually use to print a document. +\def\tocchapterentry#1#2{\line{\bf #1 \dotfill\ #2}}% +\def\tocsectionentry#1#2{\line{\quad\sl #1 \dotfill\ \rm #2}}% +\def\tocsubsectionentry#1#2{\line{\qquad\rm #1 \dotfill\ #2}}% +\def\tocentry#1#2#3{\line{\rm\hskip#1em #2 \dotfill\ #3}}% +% +% +% +% Cross-references. +% +% Definitions of references are recorded in \jobname.aux, called +% \auxfile in the macros, which btxmac.tex has opened. +% +% When a label isn't defined, we only want to complain if +% \xrefwarningtrue; btxmac uses \if@citewarning for this, so we have to +% reuse that name. We can't just say \let\ifxrefwarning = +% \if@citewarning, since then changes to the latter won't be reflected +% in the former. On the other hand, we have to have a true \if... +% command, so \if's and \fi's match properly. What a mess. +% +\let\ifxrefwarning = \iftrue +\def\xrefwarningtrue{\@citewarningtrue \let\ifxrefwarning = \iftrue}% +\def\xrefwarningfalse{\@citewarningfalse \let\ifxrefwarning = \iffalse}% +% +% +% \xref{foo} produces ``p.\thinspace ''. \xrefn{foo} produces +% ``''. \xrdef{foo} produces nothing, but defines the label +% `foo' to be on the current page. +% +% As usual, it takes two passes to get the cross-references right. +% +% We check for multiply defined labels during the reading of the aux +% file, not at the time a cross-reference macro is called by the user. +% (From Tomas Penicka .) +% +% +% \xrlabel{LABEL} expands to a cross-reference internal name. We append +% an _ character to NAME, to help avoid conflicts. And we append an `x' +% so that we don't redefine \_ on an empty label. +% +\begingroup + % Mike Spivak's MathTime macros for Times Roman fonts changes the + % catcode of _ to be active. Undo that. (From adam@symcom.math.uiuc.edu.) + \catcode`\_ = 8 + \gdef\xrlabel#1{#1_x}% +\endgroup +% +% +% \xrdef{LABEL} defines LABEL to be the current page number. But we +% don't define the label here, because the page number might be off: if +% this is not the first time through, the label would already be +% defined, and we would redefine it with the wrong information. +% +\def\xrdef#1{% + \begingroup + % Define hyperlink destination. + \hldest@impl{xrdef}{#1}% + % Define cross-reference but not hyperlink destination. + \begingroup + \@@hldestoff + \definexref{#1}{\noexpand\folio}{page}% + \endgroup + \endgroup + \ignorespaces +}% +% +% \definexref{LABEL}{DEFINITION}{CLASS} defines a cross-reference named +% LABEL of label class CLASS to be DEFINITION. (Or LABEL can be a +% control sequence; it's expanded to get the label text.) To get a +% possible page number right, we have to write the definition out to the +% auxiliary file, instead of only defining it directly. +% +\def\definexref#1#2#3{% + % Define a hyperlink destination LABEL. + \hldest@impl{definexref}{#1}% + % Remember what we're given; it might be `\@optionalarg', which + % \readauxfile trashes. (No loss of generality here, since \csname + % will fully expand the label anyway.) + \edef\temp{#1}% + % + % Be sure we've read the aux file before we zap it: + \readauxfile + % + % When we read in the aux file next time, define the label: + \edef\@wr{\noexpand\writeaux{\string\@definelabel{\temp}{#2}{#3}}}% + \@wr + \ignorespaces +}% +% +% \@definelabel{LABEL}{DEFINITION}{CLASS} actually defines LABEL of +% label class CLASS to be DEFINITION. +% +\def\@definelabel#1{% #2 and #3 will be read later. + % The following group will keep the save stack from overflowing: + % We are reading the .aux file inside a group. For undefined + % commands, \csname...\endcsname makes them equivalent to \relax + % locally in that group; when we globally redefine them, TeX enters + % the definitions on the save stack, once for each label. When done + % in the topmost group, this can overflow stack of any size, given + % sufficient number of label definitions. So, we put these + % \csname...\endcsname's inside another group, to pop the stack for + % every label. + \begingroup % Will be ended in \@definelabel@nocheck. + % Warn if we see that another label with the same name has been + % defined. Remember, we are called when the aux file is being read, + % which means that no labels have been defined yet except the ones + % which come earlier in this aux file. + \expandafter\ifx\csname\xrlabel{#1}\endcsname \relax + \expandafter\@definelabel@nocheck + \else + \expandafter\@definelabel@warn + \fi + % Define the control sequences or warn. + {#1}% +}% +% Define a label without checking for redefinitions. +\def\@definelabel@nocheck#1#2#3{% + % Define the control sequence. + \expandafter\gdef\csname\xrlabel{#1}\endcsname{#2}% + % + % Remember what kind of label this is, so \ref will know what to do. +% \global\setproperty{\xrlabel{#1}}{class}{#3}% + \setpropertyglobal{\xrlabel{#1}}{class}{#3}% + \endgroup % From \@definelabel. +}% +% Warn and then redefine a label. +\def\@definelabel@warn#1#2#3{% + \message{^^J\linenumber Label `#1' multiply defined, + value `#2' of class `#3' overwriting value + `\csname\xrlabel{#1}\endcsname' of class + `\getproperty{\xrlabel{#1}}{class}'.}% + \@definelabel@nocheck{#1}{#2}{#3}% +}% +% +% \reftie is used by several cross-referencing macros to separate +% optional text from label reference. \refspace is used by \ref to +% separate optional text from \CLASSword and by \xref to separate +% optional text from `p. '. +% +\def\reftie{\penalty\@M \ }% Do not rely on `~' being defined as a tie. +\let\refspace\ +% +% Typeset a reference to the label #1. If optional argument is +% present it will be tied with \reftie to the reference and become +% part of the hyperlink. +% +\def\xrefn{\@getoptionalarg\@finxrefn}% +\def\@finxrefn#1{% + % Hyperlink and optional TEXT. + \hlstart@impl{ref}{#1}% + \ifx\@optionalarg\empty \else + % Save \@optionalarg before it is trashed by \readauxfile. + \let\@xrefnoptarg\@optionalarg + % Read .aux file -- \@optionalarg may contain cross-references. + \readauxfile + % Typeset the \@optionalarg + {\@@hloff\@xrefnoptarg}\reftie + \fi + % Typeset the reference. + \plain@xrefn{#1}% + \hlend@impl{ref}% +}% +% This is equivalent to \xrefn but without the hyperlink stuff and the +% optional parameter so that its expansion does not contain the many +% \let's, \def's and such which the expansion of \xrefn contains. It +% is needed by \eqdefn and \eqsubdefn to be able to `cleanly' write +% texts of equation labels to .aux file. It is also used when +% functionality of \xrefn is needed without the hyperlink and the +% optional parameter. +\def\plain@xrefn#1{% + \readauxfile + % + \expandafter \ifx\csname\xrlabel{#1}\endcsname\relax + \if@citewarning + \message{\linenumber Undefined label `#1'.}% + \fi + % + % Give it a dummy definition, though, to stop multiple error messages. + \expandafter\def\csname\xrlabel{#1}\endcsname{% + `{\tt + \escapechar = -1 + \expandafter\string\csname#1\endcsname + }'% + }% + \fi + \csname\xrlabel{#1}\endcsname % Always produce something. +}% +% +% \refn is just a synonym. +% +\let\refn = \xrefn +% +% One common case: print `p. ' before the page number. +% +\def\xrefpageword{p.\thinspace}% +% +\def\xref{\@getoptionalarg\@finxref}% +\def\@finxref#1{% + % Hyperlink and optional TEXT. + \hlstart@impl{xref}{#1}% + \ifx\@optionalarg\empty \else + {\@@hloff\@optionalarg}\refspace + \fi + % Typeset page reference but omit hyperlink. + \xrefpageword\plain@xrefn{#1}% + \hlend@impl{xref}% +}% +% +% \ref[TEXT]{LABEL} typesets TEXT, \CLASSword for LABEL's class (if it's defined) +% and then does \refn on LABEL. But amstex also has a \ref, so tell the +% user if they try to use \ref and have loaded amsppt.sty. +% +% \refs{LABEL} is similar, but puts the letter `s' after the \...word, thus +% producing (for example) `Figures 1.2' (presumably to be followed by +% `and~\refn{fig-1.3}'). +% +% Note that \ref takes an optional TEXT, while \refs does not. This +% text (together with \CLASSword) will become part of the hyperlink +% generated by \ref. \refs does not include \CLASSword in the +% hyperlink. +% +\def\@maybewarnref{% + \ifundefined{amsppt.sty}% + % No amsppt.sty, so just use ours. + \else + \message{Warning: amsppt.sty and Eplain both define \string\ref. See + the Eplain manual.}% + % Remember their definition. + \let\amsref = \ref + \fi + \let\ref = \eplainref + \ref +} +\let\ref = \@maybewarnref +% +\def\eplainref{\@getoptionalarg\@fineplainref}% +\def\@fineplainref{\@generalref{1}{}}% +\def\refs{\let\@optionalarg\empty \@generalref{0}s}% +% +% #1 is an integer flag which tells whether hyperlink should include +% \@optionalarg and class word (non-0) or not (0). #2 is the text to +% follow the \...word. Both #1 and #2 are supplied by the macros +% above. #3 comes from the document, and is the LABEL. +% +% \reftie separates \@optionalarg or \..word from \refn; \refspace +% separates \@optionalarg from \..word. +% +\def\@generalref#1#2#3{% + % Save \@optionalarg before it is trashed by \readauxfile. + \let\@generalrefoptarg\@optionalarg + \readauxfile + % Maybe start hyperlink here. + \ifcase#1 \else \hlstart@impl{ref}{#3}\fi + % Get the class of the label. + \edef\@generalref@class{\getproperty{\xrlabel{#3}}{class}}% + % If the word for this class is not defined, don't complain. + \expandafter\ifx\csname \@generalref@class word\endcsname\relax + % Produce \@optionalarg followed by a \reftie, if \@optionalarg is + % not empty. + \ifx\@generalrefoptarg\empty \else {\@@hloff\@generalrefoptarg\reftie}\fi + \else + \begingroup + \@@hloff + % Produce \@optionalarg, if not empty, followed by a \refspace. + \ifx\@generalrefoptarg\empty \else \@generalrefoptarg \refspace \fi + % Produce the word. + \csname \@generalref@class word\endcsname + % Add the suffix and then put in a \reftie before the \refn. + #2\reftie + \endgroup + \fi + % Maybe start hyperlink here. + \ifcase#1 \hlstart@impl{ref}{#3}\fi + % Typeset the reference omitting hyperlinks. + \plain@xrefn{#3}% + \hlend@impl{ref}% +}% +% +% +% References to equations are similar. +% +% \eqref{foo} produces ``()''. +% \eqdefn{foo} advances \eqnumber, resets \eqsubnumber, and defines +% `foo' to be the new number. +% \eqsubdefn{foo} advances \eqsubnumber and defines `foo'. \eqref works +% for both equations and subequations, +% \eqdef{foo} does \eqdefn, then inserts an \eqno and \eqref. +% \eqsubdef{foo} does \eqsubdefn, then what \eqdef does. +% +% The non-``sub'' macros also take an optional argument; if it's +% present, we use it as the text for the equation label, instead of the +% various counters. +% +% Because there are no page break issues with equations, we can +% immediately define the control sequence. But we also need to write +% the definition out, in case the user wants to forward reference an +% equation (bad style as that may be). +% +% The current equation number is in \eqnumber; we just advance it by one +% for each \eqdef. You can handle fancier equation numbers (e.g., ones +% that include a chapter number) by redefining \eqprint, below, and +% using your own counters. We do provide for one level of substructure, +% since that's more painful to implement than superstructures. +% +\newcount\eqnumber +\newcount\subeqnumber +% +% +% \eqdefn[TEXT]{LABEL} defines LABEL to be TEXT (if it's present), +% otherwise it advances \eqnumber and defines LABEL to be that. It +% doesn't produce anything. +% +\def\eqdefn{\@getoptionalarg\@fineqdefn}% +\def\@fineqdefn#1{% + \ifx\@optionalarg\empty + \global\advance\eqnumber by 1 + % We call \eqconstruct here instead of in \@eqdefn because we don't + % want to expand it for \eqsubdefn -- \eqsubdefn already includes an + % \eqrefn which includes the text of the label which was \eqconstructed. + \def\temp{\eqconstruct{\number\eqnumber}}% + \else + % In the next \def there is (I believe) a spurious \noexpand. + % I leave in the old definition, albeit commented out, in case the + % \noexpand really _is_ necessary. But I don't thikn so. Adam Lewenberg +% \def\temp{\noexpand\@optionalarg}% + \def\temp{\@optionalarg}% + \fi + % + % Always reset the current subequation number: + \global\subeqnumber = 0 + % + % Remember this label, so that we can define subequations: + \gdef\@currenteqlabel{#1}% + \toks0 = \expandafter{\@currenteqlabel}% + % + % Actually do the definition, replacing \xrefn and \eqrefn with + % \plain@xrefn and taking precautions not to expand \plain@xrefn + % in what we output to the aux file. \plain@xrefn expands to many things, + % including \count@'s and \edef's and the expansion of \xrlabel, and + % it's just a real mess. + \begingroup + \def\eqrefn{\noexpand\plain@xrefn}% + \def\xrefn{\noexpand\plain@xrefn}% + \edef\temp{\noexpand\@eqdefn{\the\toks0}{\temp}}% + \temp + \endgroup +}% +% +% +% \eqsubdefn defines its argument as a ``subequation'' of the last \eqdef. +% +\def\eqsubdefn#1{% + \global\advance\subeqnumber by 1 + \toks0 = {#1}% + % + % Get the text of the label; + \toks2 = \expandafter{\@currenteqlabel}% + % + % We must expand \@currenteqlabel. We have to not expand + % \eqsubreftext here, as well as \plain@xrefn (which we substitute + % for \eqrefn and \xrefn), since the first arg to \eqsubreftext + % could also include lots of complicated things. + \begingroup + \def\eqrefn{\noexpand\plain@xrefn}% + \def\xrefn{\noexpand\plain@xrefn}% + \def\eqsubreftext{\noexpand\eqsubreftext}% + \edef\temp{% + \noexpand\@eqdefn + {\the\toks0}% + {\eqsubreftext{\eqrefn{\the\toks2}}{\the\subeqnumber}}% + }% + \temp + \endgroup +}% +% +% \@eqdefn{LABEL}{REF-TEXT} actually handles the equation number +% definitions and writing to the aux file. +% +% In contrast to \xrdef, we define LABEL right away (as REF-TEXT). We +% can do this since we know right now what the right equation number is. +% This eliminates some unnecessary warning. It also lets the user put +% \eqdef{} on all equations and have it work, since then \eqref +% refers to the just-defined new value. This however needs special +% treatment with respect to hyperlink labels which should not be +% duplicated. For each \eqdef{}, we define a destination with a +% unique hyperlink label. These labels can be customized with: +\newcount\phantomeqnumber +\def\phantomeqlabel{PHEQ\the\phantomeqnumber}% +% +\def\@eqdefn#1#2{% + % Write out xref into the aux file to allow forward references, but + % only if the label is not empty. Otherwise numerous redefinitions + % of the empty label might be reported. + \ifempty{#1}% + % LABEL is empty, so generate a `phantom' label. + \global\advance\phantomeqnumber by 1 + \edef\hl@eqlabel{\phantomeqlabel}% + % Do not write to the aux file but read it anyway, so that + % \@definelabel's get a chance to do the checks for multiple + % definitions before we define any cross-references. + \readauxfile + \else + % LABEL is not empty, so use it for hyperlinks. + \def\hl@eqlabel{#1}% + % Write the definition to the aux file, but do not create + % hyperlink destination (we'll create it ourselves below). + % This also reads the aux file. + {\@@hldestoff \definexref{#1}{#2}{eq}}% + \fi + % Define hyperlink destination. + \hldest@impl{eq}{\hl@eqlabel}% + % Define the LABEL omitting redefinition check. + \begingroup % \@definelabel@nocheck will end this group. + \@definelabel@nocheck{#1}{#2}{eq}% +}% +% +% \eqdef{LABEL} defines LABEL, with \eqdefn, then prints it. We allow +% an optional argument to explicitly specify the text which we define +% the label as. +% +\def\eqdef{\@getoptionalarg\@fineqdef}% +\def\@fineqdef{% + \toks0 = \expandafter{\@optionalarg}% + \edef\temp{\noexpand\@eqdef{\noexpand\eqdefn[\the\toks0]}}% + \temp +}% +% +% \eqsubdef is to \eqdef as \eqsubdefn is to \eqdefn. No optional +% argument allowed here. +% +\def\eqsubdef{\@eqdef\eqsubdefn}% +% +% \@eqdef{DEFN-CMD}{LABEL} defines LABEL, using DEFN-CMD. Then it +% inserts an \eqno (unless it's called when an \eqno would be invalid). +% Then it prints the newly-defined value using \eqprint. +% +\def\@eqdef#1#2{% + \@maybedisableeqno + \eqnum #1{#2}% Define the label and hyperlink destination. + \let\@optionalarg\empty % \@fineqref will examine \@optionalarg. + {\@@hloff\@fineqref{#2}}% Print the text without a hyperlink. + \@mayberestoreeqno + \ignorespaces +}% +% +% +% If we are in an alignment or some other inner place, \eqno won't work. +% +\let\@mayberestoreeqno = \relax +% +\def\@maybedisableeqno{% + \ifinner + \global\let\eqno = \relax + \global\let\leqno = \relax + \global\let\@mayberestoreeqno = \@restoreeqno + \fi +}% +% +% This makes `\eqno' mean \eqno again. +% +\let\@primitiveeqno = \eqno +\let\@primitiveleqno = \leqno +\def\@restoreeqno{% + \global\let\eqno = \@primitiveeqno + \global\let\leqno = \@primitiveleqno + \global\let\@mayberestoreeqno = \empty +}% +% +% +% \righteqnumbers/\lefteqnumbers configure \eqnum, \eqdef +% and \eqalignnum to place the equation number against right/left +% margin respectively. +% +\def\righteqnumbers{% + \def\eqnum{\eqno}% + \def\eqalignnum{\eqalignno}% +}% +% +\def\lefteqnumbers{% + \def\eqnum{\leqno}% + \def\eqalignnum{\leqalignno}% +}% +% +\righteqnumbers +% +% +% \eqrefn[TEXT]{LABEL} produces the text for the equation label LABEL, or +% something suitable if LABEL is undefined. (It possibly issues a +% warning in the latter case as well.) TEXT followed by a \reftie is +% prepended to the equation text as part of the hyperlink. +% +\def\eqrefn{\@getoptionalarg\@fineqrefn}% +\def\@fineqrefn#1{% + \eqref@start{#1}% + % Typeset the equation reference but do not produce hyperlink. + \plain@xrefn{#1}% + \hlend@impl{eq}% +}% +% +% \eqref[TEXT]{LABEL} is the usual way to refer to equation labels; it +% calls \eqprint on the text of LABEL, prepending it with TEXT and a +% \reftie as part of the hyperlink. +% +\def\eqref{\@getoptionalarg\@fineqref}% +\def\@fineqref#1{% + \eqref@start{#1}% + % Typeset the equation reference but do not produce hyperlink. + \eqprint{\plain@xrefn{#1}}% + \hlend@impl{eq}% +}% +% Common code executed at the start of \@fineqrefn and \@fineqref. +\def\eqref@start#1{% + % Save \@optionalarg in case \phantomeqlabel is redefined by the + % user to something that trashes it. + \let\@eqrefoptarg\@optionalarg + % Hyperlink (fetch last `phantom' equation label if LABEL is empty). + \ifempty{#1}% + \hlstart@impl{eq}{\phantomeqlabel}% + \else + \hlstart@impl{eq}{#1}% + \fi + % Optional TEXT followed by a \reftie. + \ifx\@eqrefoptarg\empty \else + {\@@hloff\@eqrefoptarg\reftie}% + \fi +}% +% +% +% \eqconstruct{EQ-TEXT} constructs an equation number, i.e., the text to +% be defined as the value of a label. +% +\let\eqconstruct = \identity +% +% \eqprint{EQ-TEXT} produces the typeset equation number EQ-TEXT. +% +\def\eqprint#1{(#1)}% +% +% \eqsubreftext{EQ-TEXT}{SUBEQ-TEXT} produces the text of a subequation +% reference. (\eqprint is later called on the result of this to produce +% output for subequations; I didn't define any \subeqprint.) +% +\def\eqsubreftext#1#2{#1.#2}% +% +% +% +% Indexing. +% +% \defineindex{PREFIX} defines an index with ``prefix'' PREFIX. The +% prefix is used to construct the output filename and the various +% commands. We just define all the index commands for this index to +% call the general commands with PREFIX. +% +\let\extraidxcmdsuffixes = \empty +% +\def\defineindex#1{% + \def\@idxprefix{#1}% + % + % Define a switch to control opening and writing of the index file + % for this prefix. + \expandafter\innernewif\csname if\@idxprefix dx\endcsname + \csname \@idxprefix dxtrue\endcsname + % + % Define the indexing commands for this prefix. + \for\@idxcmd:=,marked,submarked,name% + \extraidxcmdsuffixes\do + {% + \@defineindexcmd\@idxcmd + }% + % + % Allocate a stream for the output. + \ece\innernewwrite{@#1indexfile}% + % + % And a conditional to test whether we've opened the file. + \ece\innernewif{if@#1indexfileopened}% +}% +% +% +% \@defineindexcmd{SUFFIX} defines both silent and non-silent index +% command for prefix \@idxprefix with suffix SUFFIX. That is, we define +% both `\@idxprefix dxSUFFIX' and `\s\@idxprefix dxSUFFIX' to call the +% corresponding generic command with \@idxprefix. \silentindexentry is +% used to decide whether we should ignore following spaces. +% +\newif\ifsilentindexentry +% +\def\@defineindexcmd#1{% + \@defineoneindexcmd{s}{#1}\silentindexentrytrue + \@defineoneindexcmd{}{#1}\silentindexentryfalse +}% +% +% +% \@defineoneindexcmd{PREFIX}{SUFFIX}{PRECALL} does just one silent or +% non-silent commands. We define the command `\@@PREFIXidxSUFFIX' to do +% PRECALL, then define \@idxprefix, then call \@idxgetrange with an +% argument of `\@@{,s}idxSUFFIX'. (So far every indexing command +% should allow a range. If not, you could redefine `\@@{,s}idxSUFFIX' +% after this macro is called.) +% +\def\@defineoneindexcmd#1#2#3{% + \toks@ = {#3}% + \edef\temp{% + \def + % We have to restrict expansion because the generic (\@@...) + % commands will be defined after the first call to \defineindex. + % Not expanding the user (\idx...) commands is unnecessary unless + % the user has defined some new commands, but may as well be cautious. + \expandonce\csname#1\@idxprefix dx#2\endcsname % e.g., \idx or \sidxname. + {\def\noexpand\@idxprefix{\@idxprefix}% define \@idxprefix + % call, e.g., \@@idx or \@@sidxname: + \expandonce\csname @@#1idx#2\endcsname + }% + \def + \expandonce\csname @@#1idx#2\endcsname{% e.g., \@@idx + % First do PRECALL. + \the\toks@ + % Then call \@idxgetrange with, e.g., \@idx or \@sidxname as its arg. + \noexpand\@idxgetrange\expandonce\csname @#1idx#2\endcsname + }% + }% + \temp +}% +% +% +% \@idxwrite{TERM}{PAGENO} writes a general index entry for TERM on page +% PAGENO to the index file `\@idxprefix indexfile'. We open the stream +% as `\indexfilebasename.\@idxprefix dx' if it isn't already open. We +% only write out the index term if this has not been disabled with +% \csname\@idxprefix dxfalse\endcsname. +% +\let\indexfilebasename = \jobname +% +\def\@idxwrite#1#2{% + \csname if\@idxprefix dx\endcsname + % Be sure the file is opened. + \@openidxfile + % + % Save the index term. + \def\temp{#1}% + % + % Write the index term and page number. + \edef\@wr{% + \expandafter\write\csname @\@idxprefix indexfile\endcsname{% + \string\indexentry + {\sanitize\temp}% + {\noexpand#2}% + }% + }% + \@wr + \else + % Produce a whatsit anyway, to ensure consistent page-breaking. + \write-1{}% + \fi + % + % Marginalize the index term, if desired. We \sanitize the term to + % avoid expansion of any (user-defined) active characters that made + % it through (e.g., because they had not been added to \dospecials + % and hence were not read verbatim by the indexing commands). + \ifindexproofing + \def\temp{#1}% + \edef\temp{% + \insert\@indexproof{\noexpand\indexproofterm{\sanitize\temp}}% + }% + \temp + % Allow `infinitesimal' in \sidx{Infinitesimal}infinitesimal to be + % hyphenated. + \ifhmode\allowhyphens\fi + \fi + % + % We just appended at least one non-discardable item (namely, the + % whatsit from the \write) to the current list. So in case glue comes + % next (not unlikely), be sure we don't inadvertently make that glue a + % valid breakpoint, if it wouldn't have been without us. + \hookrun{afterindexterm}% + % + % This is the end of the index entry processing. If this was a silent + % entry, ignore following spaces. + \ifsilentindexentry \expandafter\ignorespaces\fi +}% +% +\def\@openidxfile{% + \csname if@\@idxprefix indexfileopened\endcsname \else + \expandafter\immediate\openout\csname @\@idxprefix indexfile\endcsname = + \indexfilebasename.\@idxprefix dx + \expandafter\global\csname @\@idxprefix indexfileopenedtrue\endcsname + \fi +}% +% +% +% If this conditional is true, we output the index terms on the page +% where they occur. +\newif\ifindexproofing +% +% We need a new insertion class to collect the proofed terms. +\newinsert\@indexproof +\dimen\@indexproof = \maxdimen % No limit on number of terms. +\count\@indexproof = 0 \skip\@indexproof = 0pt % They take up no space. +% +% This actually typesets the proofed term. We don't go to any lengths +% to provide nice-looking output; since the term might have all kinds of +% weird characters in it, we just dump it in the smallest standard +% Computer Modern typewriter font. +% +% We put the term in an \hbox, even though that might make the output +% run off the page, since we don't really need to see all of it, and +% I think it's better to opt for simplicity -- one term per line. +% +\font\indexprooffont = cmtt8 +\def\indexproofterm#1{\hbox{\strut \indexprooffont #1}}% +% +% +% If \output doesn't use \makeheadline, or redefines it, it's up to the +% new \output to define index hyperlink destination and to call +% \indexproofunbox. +% +\let\@plainmakeheadline = \makeheadline +\def\makeheadline{% + % Define index page destination only when this `page anchor' is defined. + \expandafter\ifx\csname\idxpageanchor{\folio}\endcsname\relax \else + % Say \@@hldeston in case a page break happened at an unfortunate + % time when user said \hldestoff. + {\@@hldeston \hldest@impl{idx}{\hlidxpagelabel{\folio}}}% + \fi + \indexproofunbox + \@plainmakeheadline +}% +% +% We want to put the proof index terms in the margin, outside the +% printed area. So if \outsidemargin (for odd pages) and \insidemargin +% (for even pages) are undefined, we define them (both) to be the default +% TeX margin -- one inch + \hoffset. +\def\indexsetmargins{% + \ifx\undefined\outsidemargin + \dimen@ = 1truein + \advance\dimen@ by \hoffset + \edef\outsidemargin{\the\dimen@}% + \let\insidemargin = \outsidemargin + \fi +}% +% +% We always put the terms in the right-hand margin, so long terms run +% off the page, instead of into the text. +\def\indexproofunbox{% + \ifvoid\@indexproof\else + \indexsetmargins + \rlap{% + \kern\hsize + \ifodd\pageno \kern\outsidemargin \else \kern\insidemargin \fi + \vbox to 0pt{\unvbox\@indexproof\vss}% + }\nointerlineskip + \fi +}% +% +% +% \@idxgetrange\CS parses an optional argument which, if present, should +% be either `begin' or `end', marking the beginning or ending of a range +% for the index entry. If we find this, we set the appropriate one of +% \@idxrangestr. Then we call \CS. +% +% If the optional argument is `see' or `seealso' we read another +% argument, namely, the entry to see. +% +\def\idxrangebeginword{begin}% +\def\idxbeginrangemark{(}% the corresponding magic char to go in the idx file +% +\def\idxrangeendword{end}% +\def\idxendrangemark{)}% +% +\def\idxseecmdword{see}% +\def\idxseealsocmdword{seealso}% +\newif\if@idxsee +\newif\if@hlidxencap +\let\@idxseenterm = \relax +% +\def\idxpagemarkupcmdword{pagemarkup}% +\let\@idxpagemarkup = \relax +% +\def\@idxgetrange#1{% + \let\@idxrangestr = \empty + \let\@afteridxgetrange = #1% + % Since \@getoptionalarg scans ahead, it might scan the \idxargopen + % character of the following non-optional argument if the optional + % argument is missing. To make sure that \idxargopen gets the right + % catcode, we need to set it up before calling \@getoptionalarg. + \begingroup + \catcode\idxargopen=1 + \@getoptionalarg\@finidxgetopt +}% +\def\@finidxgetopt{% + \global\let\@idxgetrange@arg\@optionalarg + \endgroup + % + \@hlidxencaptrue + % + \for\@idxarg:=\@idxgetrange@arg\do{% + % These are ordered by my guess at frequency of use. + \expandafter\@idxcheckpagemarkup\@idxarg=,% + % + \ifx\@idxarg\idxrangebeginword + \def\@idxrangestr{\idxencapoperator\idxbeginrangemark}% + \else + \ifx\@idxarg\idxrangeendword + \def\@idxrangestr{\idxencapoperator\idxendrangemark}% + \@hlidxencapfalse + \else + \ifx\@idxarg\idxseecmdword + \def\@idxpagemarkup{indexsee}% + \@idxseetrue + \@hlidxencapfalse + \else + \ifx\@idxarg\idxseealsocmdword + \def\@idxpagemarkup{indexseealso}% + \@idxseetrue + \@hlidxencapfalse + \else + \ifx\@idxpagemarkup\relax + \errmessage{Unrecognized index option `\@idxarg'}% + \fi + \fi + \fi + \fi + \fi + }% + % Stick hyperlink encapsulator into \@idxpagemarkup. + \ifnum\hldest@place@idx < 0 \else + \if@hlidxencap + \ifx\@idxpagemarkup\relax + % Even when user gives no pagemarkup command, we still do + % insert our hyperlink encapsulator. + \let\@idxpagemarkup\empty + \fi + \ifcase\hldest@place@idx \relax + % \hldest@place@idx = 0, dests point to a page with a term. + \edef\@idxpagemarkup{hlidxpage{\@idxpagemarkup}}% + % We want to define index \hldest's only on those + % pages which contain at least one index term, so this + % `page anchor' will tell \makeheadline on which pages to + % generate an \hldest. + \definepageanchor{\noexpand\folio}% + \else + % \hldest@place@idx = 1, dests point to exact location of a term. + \global\advance\hlidxlabelnumber by 1 + \edef\@idxpagemarkup{hlidx{\hlidxlabel}{\@idxpagemarkup}}% + \hldest@impl{idx}{\hlidxlabel}% + \fi + \fi + \fi + % + \@afteridxgetrange +}% +% +% +% Check for a command of the form `pagemarkup=\cmd', and if found, set +% \@idxpagemarkup to `cmd'. +% +\def\@idxcheckpagemarkup#1=#2,{% + \def\temp{#1}% + \ifx\temp\idxpagemarkupcmdword + \if ,#2, % If #2 is empty, complain. + \errmessage{Missing markup command to `pagemarkup'}% + \else + % Remove a trailing =. + \def\temp##1={##1}% + \edef\@idxpagemarkup{\temp\string#2}% + \fi + \fi +}% +% +% +% \hlidxpage and \hlidx are hyperlink encapsulators for the two types +% of hyperlink destinations for index terms. +% +% \hldest@place@idx defines which type is selected. When defined to 0, +% we generate destinations pointing to the page on which the indexed +% term is located. When defined to 1, we generate destinations +% pointing to exact location of the indexed term. When negative, we +% generate no hyperlinks / destinations. +\def\hldest@place@idx{-1}% +% +% \idxpageanchor{PAGE} expands to index page anchor internal name. +% This page anchor is used when index entries point to pages. Like in +% \xrlabel, we append an _ character to NAME, to help avoid conflicts. +% And we append a `p' so that we don't redefine \_ on an empty label. +\begingroup + % Mike Spivak's MathTime macros for Times Roman fonts changes the + % catcode of _ to be active. Undo that. (From adam@symcom.math.uiuc.edu.) + \catcode`\_ = 8 + \gdef\idxpageanchor#1{#1_p}% +\endgroup +% \definepageanchor{PAGE} defines a page anchor for the page PAGE. +% \makeheadline will then define a hyperlink destination on top of +% each page for which an anchor is defined. To get a possible page +% number right, we have to write the definition out to the auxiliary +% file, instead of only defining it directly. +\def\definepageanchor#1{% + % Be sure we've read the aux file before we zap it: + \readauxfile + % + % When we read in the aux file next time, define the label: + \edef\@wr{\noexpand\writeaux{\string\@definepageanchor{#1}}}% + \@wr + \ignorespaces +}% +% \@definepageanchor{PAGE} actually defines page anchor for the PAGE. +\def\@definepageanchor#1{% + \expandafter\gdef\csname\idxpageanchor{#1}\endcsname{}% +}% +% +% Hyperlink labels for both types of destinations. +\newcount\hlidxlabelnumber +\def\hlidxlabel{IDX\the\hlidxlabelnumber}% +\def\hlidxpagelabel#1{IDXPG#1}% +% +% \hlidx{HYPERLINK-LABEL}{PAGEENCAP}{PAGESPEC} +\def\hlidx#1#2#3{% + \ifempty{#2}% + \let\@idxpageencap\relax + \else + \expandafter\let\expandafter\@idxpageencap\csname #2\endcsname + \fi + \hlstart@impl{idx}{#1}% + \@idxpageencap{#3}% + \hlend@impl{idx}% +}% +% +% \hlidxpage{PAGEENCAP}{PAGESPEC} +% +% We expect PAGESPEC to be one of the following: +% 14 (single page number) +% 14, 15 (list of two consecutive page numbers) +% 14--15 (page range) +% +% If you configure MakeIndex to use different page list separator +% (delim_n parameter in .mst file) / different page range separator +% (delim_r parameter), you should call \setidxpagelistdelimiter / +% \setidxpagerangedelimiter to setup the new separators. +% +% In case of a single page number, we call \PAGEENCAP on the page +% number and turn the result into a hyperlink. +% +% In case of a two-page list, we break the list, call \PAGEENCAP on +% each of the page numbers separately, and turn each result into a +% hyperlink, producing page list separator between the page numbers. +% +% In case of a page range, we do not break the range, call \PAGEENCAP +% on the entire range and turn what results into a hyperlink for the +% first of the page numbers. +\def\hlidxpage#1#2{% + % Set \@idxpagei[i][ref] and \@idxpagesep + \@hlidxgetpages{#2}% + % Alias for \PAGEENCAP. + \ifempty{#1}% + \let\@idxpageencap\relax + \else + \expandafter\let\expandafter\@idxpageencap\csname #1\endcsname + \fi + % Now comes the first part, to be done in any of the three cases. + \hlstart@impl{idx}{\hlidxpagelabel{\@idxpageiref}}% + \expandafter\@idxpageencap\expandafter{\@idxpagei}% + \hlend@impl{idx}% + % The second part, to be done only if there is a second page number. + \ifx\@idxpageii\empty \else + \@idxpagesep + \hlstart@impl{idx}{\hlidxpagelabel{\@idxpageiiref}}% + \expandafter\@idxpageencap\expandafter{\@idxpageii}% + \hlend@impl{idx}% + \fi +}% +% +% This macro parses PAGESPEC parameter to \hlidxpage. It sets +% \@idxpagei to the first page number, \@idxpageii to the second (if +% present; if not, \@idxpageii will be set to \empty). For the first +% page number, use \@idxpageiref to construct hyperlink label; for +% the second page number, use \@idxpageiiref. Use \@idxpagesep to +% separate the two page numbers. +% +% NOTE: we use \@idxpagei[i], not \idxpagei[i], because the user may +% use \idxparselist / \idxparserange in his \PAGEENCAP, in which case +% our \idxpagei[i]'s will get garbled. +\def\@hlidxgetpages#1{% + % Try to parse a two-page list. + \idxparselist{#1}% + \ifx\idxpagei\empty + % It is not a two-page list, try page range. + \idxparserange{#1}% + \ifx\idxpagei\empty + % It is neither a two-page list nor a page range, so we assume + % it is a single page number. + \def\@idxpageiref{#1}% Label for \hlstart. + \else + % It is a page range. + \let\@idxpageiref\idxpagei % Label for \hlstart. + \fi + \def\@idxpagei{#1}% + \let\@idxpageii\empty + \else + % It is a two-page list. + \let\@idxpagei\idxpagei + \let\@idxpageii\idxpageii + \let\@idxpageiref\idxpagei % Label for \hlstart. + \let\@idxpageiiref\idxpageii % Label for \hlstart. + \let\@idxpagesep\idxpagelistdelimiter + \fi +}% +% +% Set up a macro \@idxparselist and user-accessible \idxparselist for +% parsing two-page list. Takes list separator (which is saved in +% \idxpagelistdelimiter). If the list is found, \@idxparselist will +% set \idxpagei to the first page number, \idxpageii to the second; +% if not found, it will set \idxpagei to \empty (this implies that +% the list's first page number should never be empty). +\def\setidxpagelistdelimiter#1{% + \gdef\idxpagelistdelimiter{#1}% + \gdef\@removepagelistdelimiter##1#1{##1}% + \gdef\@idxparselist##1#1##2\@@{% + \ifempty{##2}% + \let\idxpagei\empty + \else + \def\idxpagei{##1}% + \edef\idxpageii{\@removepagelistdelimiter##2}% + \fi + }% + \gdef\idxparselist##1{\@idxparselist##1#1\@@}% +}% +% +% Same as previous, but \@idxparserange and \idxparserange will parse +% page range, range separator is saved in \idxpagerangedelimiter. +\def\setidxpagerangedelimiter#1{% + \gdef\idxpagerangedelimiter{#1}% + \gdef\@removepagerangedelimiter##1#1{##1}% + \gdef\@idxparserange##1#1##2\@@{% + \ifempty{##2}% + \let\idxpagei\empty + \else + \def\idxpagei{##1}% + \edef\idxpageii{\@removepagerangedelimiter##2}% + \fi + }% + \gdef\idxparserange##1{\@idxparserange##1#1\@@}% +}% +% +% Set up the default delimiters. +\setidxpagelistdelimiter{, }% +\setidxpagerangedelimiter{--}% +% +% +% \@idxtokscollect uses \@idxmaintoks as the token list for the main +% part of an index entry and \@idxsubtoks for the subpart. Then it +% calls \@idxwrite. +% +\def\idxsubentryseparator{!}% +\def\idxencapoperator{|}% +\def\idxmaxpagenum{99999}% +% +\newtoks\@idxmaintoks +\newtoks\@idxsubtoks +% +\def\@idxtokscollect{% + % Remember the subentry. + \edef\temp{\the\@idxsubtoks}% + % + % We want to expand the conditions, but not the terms. The index + % entry starts simply with \@idxmaintoks and \@idxsubtoks. + \edef\@indexentry{% + \the\@idxmaintoks + \ifx\temp\empty\else \idxsubentryseparator\the\@idxsubtoks \fi + \@idxrangestr + }% + % + % If this is a `see' or `see also' entry, we need to read one more + % arg. We use a giant page number so the entry will be last (for the + % benefit of `see also's). MakeIndex rejects page numbers >=1000. + % + \if@idxsee + \@idxseefalse % Reset so the next term won't be a `see'. + \edef\temp{\noexpand\idx@getverbatimarg + {\noexpand\@finidxtokscollect{\idxmaxpagenum}}}% + \else + \def\temp{\@finfinidxtokscollect\folio}% + \fi + \temp +}% +% +% +% \@finidxtokscollect{PAGENO}{REAL-TERM} reads the final term for +% see/see also entries. We do not check if the person has put both a +% range and a see in the same index term (which will confuse makeindex). +% +\def\@finidxtokscollect#1#2{% + \def\@idxseenterm{#2}% + \@finfinidxtokscollect{#1}% +}% +% +% \@finfinidxtokscollect{PAGENO} writes \@indexentry for page PAGENO. +% Besides \@indexentry, if \@idxpagemarkup is not \relax we output an +% index entry \@indexentry|\@idxpagemarkup{PAGENO} (but omitting | if +% this is a range term, because in that case | will have been added +% together with \@idxrangestr in \@idxtokscollect). And if +% \@idxseenterm is not \relax we output {\@idxseenterm} after the +% \@idxpagemarkup. (This will become an argument to the ``markup'' +% command, which will be \indexsee or \indexseealso.) +% +\def\@finfinidxtokscollect#1{% + % If we've got a page markup command, append it. + \ifx\@idxpagemarkup\relax \else + \toks@ = \expandafter{\@indexentry}% + \edef\@indexentry{% + \the\toks@ + % Add | only if this is not a range term, otherwise | has + % already been added with \@idxrangestr by \@idxtokscollect. + \ifx\@idxrangestr\empty \idxencapoperator \fi + \@idxpagemarkup + }% + \let\@idxpagemarkup = \relax + \fi + % + % If we've got an argument to the ``page markup'' command, append it. + \ifx\@idxseenterm\relax \else + \toks@ = \expandafter{\@indexentry}% + \edef\@indexentry{\the\toks@{\sanitize\@idxseenterm}}% + \let\@idxseenterm = \relax + \fi + % + % Finally, write what we've constructed. + \expandafter\@idxwrite\expandafter{\@indexentry}{#1}% +}% +% +% +% \@idxcollect{MAIN}{SUB} sets up the token registers +% \@idx{main,sub}toks, then calls \@idxtokscollect. This is convenient +% for some of the macros below. +% +\def\@idxcollect#1#2{% + \@idxmaintoks = {#1}% + \@idxsubtoks = {#2}% + \@idxtokscollect +}% +% +% +% Macros for reading verbatim the TERM, SUBTERM, SEE and SEEALSO +% arguments of indexing commands. +% +% These can be customized by the user to different beginning and +% end of group characters, so that `{' and `}' can be used inside +% index terms. +\def\idxargopen{`\{}% +\def\idxargclose{`\}}% +% \idx@getverbatimarg#1{ARG} reads ARG verbatim and then calls #1 with +% that argument. We use it to read all TERM, (non-optional) SUBTERM, +% SEE and SEEALSO arguments. +\def\idx@getverbatimarg#1{% + \def\idx@getverbatimarg@cmd{#1}% Save the command, allowing it to be + % more than just a command sequence. + \begingroup + \uncatcodespecials + \catcode\idxargopen=1 + \catcode\idxargclose=2 + \catcode`\ =10 % Swallow multiple consequent spaces. + \catcode`\^^I=10 % Just in case, to avoid dependence on + \catcode`\^^M=5 % current meanings of tabs and newlines. + \idx@fingetverbatimarg +}% +\def\idx@fingetverbatimarg#1{\endgroup\idx@getverbatimarg@cmd{#1}}% +% \idx@getverboptarg#1[ARG] reads ARG verbatim and then calls #1 with +% that argument. We use it to read all optional SUBTERM arguments. +% This is adopted from btxmac.tex's \@getoptionalarg. +\def\idx@getverboptarg#1{% + \def\idx@optionaltemp{#1}% Save the command, allowing it to be more + % than just a command sequence (unlike \@getoptionalarg). + \let\idx@optionalnext = \relax + % If this is a SEE or SEEALSO entry, we know that another + % non-optional arg follows, delimited by the \idxargopen and + % \idxargclose characters. Since \@futurenonspacelet scans ahead, + % it might scan \idxargopen if the optional argument is missing. To + % make sure that \idxargopen gets the right catcode, we need to set + % it up before calling \@futurenonspacelet. + \begingroup + \if@idxsee \catcode\idxargopen=1 \fi + \@futurenonspacelet\idx@optionalnext\idx@bracketcheck +}% +% The \expandafter's in this macro let us avoid the use of \aftergroup, +% which is somewhat more expensive. +\def\idx@bracketcheck{% + \ifx [\idx@optionalnext + \endgroup % Cancel \catcode\idxargopen=1. + \expandafter\idx@finbracketcheck + \else + \endgroup % Cancel \catcode\idxargopen=1. + \let\@optionalarg = \empty + % We can't do the \temp after the \fi, because then the \temp gets + % in the way of reading the optional argument from the input, if + % we do have one. + \expandafter\idx@optionaltemp + \fi +}% +% +\def\idx@finbracketcheck{% + \begingroup + \uncatcodespecials + % `[' should already be \other since \idx@bracketcheck succeeded; + % we assume that the user also didn't give `]' a funky catcode + % (otherwise it should have been added to \dospecials, anyway). + %\catcode`\[=\other + %\catcode`\]=\other + \catcode`\ =10 % Swallow multiple consequent spaces. + \catcode`\^^I=10 % Just in case, to avoid dependence on + \catcode`\^^M=5 % current meanings of tabs and newlines. + \idx@@getoptionalarg +}% +% +\def\idx@@getoptionalarg[#1]{% + \endgroup + \def\@optionalarg{#1}% + \idx@optionaltemp +}% +% +% Produce term (which has been scanned verbatim) as output, rescanning +% with `real' catcodes. \endinput ensures TeX does not see the ending +% newline. Stepan Kasal verified that it is necessary both for e-TeX +% and for ordinary TeX (see texinfo.tex). We reset catcode of newline +% because \scantokens (both the e-TeX primitive and the Eplain's +% emulation) generate a trailing newline when newline is catcode 13 +% (putting \scantokens in an \hbox also fixes that newline--strange). +% We don't write `\endinput' directly because the merge script strips +% any lines with an \endinput. +{\catcode`\&=0 +\gdef\idx@scanterm#1{% + \edef\idx@scanterm@nl@catcode{\the\catcode`\^^M\relax}% + \catcode`\^^M=5 + \scantokens{#1&endinput}% + \catcode`\^^M=\idx@scanterm@nl@catcode +}}% +% +% +% Following are the TeX macros that correspond to the commands +% that actually appear in the document. +% +% \@idx{TERM} produces TERM in the output and then makes the index entry +% for TERM as usual. We don't allow a [SUBTERM] here since then we +% would lose spaces after the command, which would be very inconvenient. +% +% As with all our index commands, we've already defined \@idxprefix (in +% \idx or whatever), to save passing it around, and we've looked for a +% range argument before TERM. +% +\def\@idx{\idx@getverbatimarg\@finidx}% +\def\@finidx#1{% + \idx@scanterm{#1}% Produce TERM as output. + \@idxcollect{#1}{}% +}% +% +% \@sidx{TERM}[SUBTERM] produces an index entry TERM and no output. If +% SUBTERM is present, this is a subentry. (At the moment, I don't +% provide for subsubentries, since I've never needed that.) +% +\def\@sidx{\idx@getverbatimarg\@finsidx}% +\def\@finsidx#1{\@idxmaintoks = {#1}\idx@getverboptarg\@finfinsidx}% +\def\@finfinsidx{% + \@idxsubtoks = \expandafter{\@optionalarg}% + \@idxtokscollect +}% +% +% +% \@idxconstructmarked{TOKS-REG}\CS{TERM} +% +\def\idxsortkeysep{@}% This `@' is catcode 11, but it doesn't matter. +% +\def\@idxconstructmarked#1#2#3{% + \toks@ = {#2}% The control sequence. + \toks2 = {#3}% The term. + % + % Construct TERM@\CS{TERM} as the string to write. + \edef\temp{\the\toks2 \idxsortkeysep \the\toks@{\the\toks2}}% + % + % Save it in TOKS-REG. + #1 = \expandafter{\temp}% +}% +% +% +% \@idxmarked\CS{TERM} outputs \CS{TERM} and then makes an index entry +% sorted by TERM but producing \CS{TERM}. +% +\def\@idxmarked#1{\idx@getverbatimarg{\@finidxmarked{#1}}}% +\def\@finidxmarked#1#2{% + \idx@scanterm{#1{#2}}% Produce \CS{TERM} as output. + \@idxconstructmarked\@idxmaintoks{#1}{#2}% + \@idxsubtoks = {}% + \@idxtokscollect +}% +% +% \@sidxmarked\CS{TERM}[SUBTERM] outputs an index entry sorted by TERM +% but producing \CS{TERM}. +% +\def\@sidxmarked#1{\idx@getverbatimarg{\@finsidxmarked{#1}}}% +\def\@finsidxmarked#1#2{% + \@idxconstructmarked\toks@{#1}{#2}% + \edef\temp{{\the\toks@}}% + \expandafter\@finsidx\temp +}% +% +% +% \@idxsubmarked{TERM}\CS{SUBTERM} is like \@idxmarked, except that it's +% SUBTERM that's marked instead of TERM. +% +\def\@idxsubmarked{% + \let\sidxsubmarked@print\idxsubmarked@print + \idx@getverbatimarg\@finsidxsubmarked +}% +\def\idxsubmarked@print{\expandafter\idx@scanterm\expandafter}% +% +% \@sidxsubmarked{TERM}\CS{SUBTERM} is to \@sidxmarked as \@idxsubmarked +% is to \@idxmarked. +% +\def\@sidxsubmarked{% + \let\sidxsubmarked@print\gobble + \idx@getverbatimarg\@finsidxsubmarked +}% +\def\@finsidxsubmarked#1{\@idxmaintoks = {#1}\@@finsidxsubmarked}% Reads TERM. +\def\@@finsidxsubmarked#1{\idx@getverbatimarg{\@@@finsidxsubmarked{#1}}}% Reads \CS. +\def\@@@finsidxsubmarked#1#2{% Reads {\CS}{SUBTERM}. + \sidxsubmarked@print % Prints for \@idxsubmarked, gobbles for \@sidxsubmarked. + {\the\@idxmaintoks\space #1{#2}}% Maybe produce `TERM \CS{SUBTERM}' as output. + \@idxconstructmarked\@idxsubtoks{#1}{#2}% + \@idxtokscollect +}% +% +% +% \@idxcollectname{FIRST}{LAST} puts `LAST, FIRST' into \temp. (Well, +% we use \idxnameseparator instead of hardwiring `, '.) If FIRST is +% empty, don't include the separator. +% +\def\idxnameseparator{, }% as in `Tachikawa, Elizabeth' +% +\def\@idxcollectname#1#2{% + \def\temp{#1}% + \ifx\temp\empty + \toks@ = {}% + \else + \toks@ = \expandafter{\idxnameseparator #1}% + \fi + \toks2 = {#2}% + % + \edef\temp{\the\toks2 \the\toks@}% +}% +% +% +% \@idxname{FIRST}{LAST} also produces `FIRST LAST' in the output and an +% index entry for `LAST, FIRST'. +% +\def\@idxname{\idx@getverbatimarg\@finidxname}% +\def\@finidxname#1{\idx@getverbatimarg{\@finfinidxname{#1}}}% +\def\@finfinidxname#1#2{% + \idx@scanterm{#1 #2}% Separate the names by a space in the output. + \@idxcollectname{#1}{#2}% + \expandafter\@idxcollect\expandafter{\temp}{}% +}% +% +% \@sidxname{FIRST}{LAST}[SUBTERM] is to \@sidx as \@idxname is to +% \@idx. +% +\def\@sidxname{\idx@getverbatimarg\@finsidxname}% +\def\@finsidxname#1{\idx@getverbatimarg{\@finfinsidxname{#1}}}% +\def\@finfinsidxname#1#2{% + \@idxcollectname{#1}{#2}% + \expandafter\@finsidx\expandafter{\temp}% +}% +% +% +% Now we come to actually producing the index, i.e., implementing the +% formatting commands that MakeIndex outputs. +% +% \readindexfile is responsible for formatting and printing the index. +% It reads \indexfilebasename.ind. We implement the same commands that +% LaTeX does. I suppose we could allow for different indices having +% different basenames, but I can't imagine when that would be useful. +% +\let\indexfonts = \relax +% +\def\readindexfile#1{% + \edef\@idxprefix{#1}% + % + % Does the output file exist? + \testfileexistence[\indexfilebasename]{\@idxprefix nd}% + \iffileexists \begingroup + % If no \begin or \end, define them. The argument will be `{theindex}'. + \ifx\begin\undefined + \def\begin##1{\@beginindex}% + \let\end = \@gobble + \fi + % + % Read the file: + \input \indexfilebasename.\@idxprefix nd + % + % \doublecolumns isn't affected by groups. + \singlecolumn + \endgroup + \else + \message{No index file \indexfilebasename.\@idxprefix nd.}% + \fi +}% +% +% Here's the default for `\begin{theindex}', if \begin isn't defined. +\def\@beginindex{% + % Define the commands MakeIndex outputs. + \let\item = \@indexitem + \let\subitem = \@indexsubitem + \let\subsubitem = \@indexsubsubitem + % + % Set up the default formatting: + \indexfonts + \doublecolumns + \parindent = 0pt + % + % Let the user override the defaults. + \hookrun{beginindex}% +}% +% +% MakeIndex puts \indexspace between groups in the ind file. +\let\indexspace = \bigbreak +% +% You can make \afterindexterm appear after the term and before the +% first page with the following in the ist file: +% delim_0 "\\afterindexterm " +% delim_1 "\\afterindexterm " +% delim_2 "\\afterindexterm " +\let\afterindexterm = \quad +% +% +% Top-level index entries start with \item. +\newskip\aboveindexitemskipamount \aboveindexitemskipamount = 0pt plus2pt +\def\aboveindexitemskip{\vskip\aboveindexitemskipamount}% +% +\def\@indexitem{\begingroup + \@indexitemsetup + \leftskip = 0pt + \aboveindexitemskip + \penalty-100 % Encourage page breaks before items. + % + % But forbid page breaks after items, in case a subitem follows. + \def\par{\endgraf\endgroup\nobreak}% +}% +% +% Secondary index entries. +\def\@indexsubitem{% + \@indexitemsetup + \leftskip = 1em +}% +% +% And tertiary entries. +\def\@indexsubsubitem{% + \@indexitemsetup + \leftskip = 2em +}% +% +% Common setup for the formatting. +\def\@indexitemsetup{% + \par + \hangindent = 1em + \raggedright + \hyphenpenalty = 10000 + \hookrun{indexitem}% +}% +% +% +% \indexsee{TERM}{PAGENO} ignores PAGENO, and says `see TERM'. +\def\seevariant{\it}% +\def\indexseeword{see}% +\def\indexsee{\idx@getverbatimarg\@finindexsee}% +\def\@finindexsee#1#2{{\seevariant \indexseeword\/ }\idx@scanterm{#1}}% +% +% \indexseealso{TERM}{PAGENO} is similar. +\def\indexseealsowords{see also}% +\def\indexseealso{\idx@getverbatimarg\@finindexseealso}% +\def\@finindexseealso#1#2{{\seevariant \indexseealsowords\/ }\idx@scanterm{#1}}% +% +% +% We provide one index by default; commands are \idx, \sidx, etc. +\defineindex{i}% +% +% +% +% Justification of multiple input lines. +% +% You use these by saying +% {\flushright +% +% } +% +% and similarly for \flushleft and \center. The command must be +% embedded in a group. The lines are set in paragraphs as usual, i.e., +% blank lines start a new paragraph (by virtue of the +% \blanklineskipamount vertical glue being inserted). +% +% \environment ... \endenvironment isn't appropriate in this case, since +% these ``environments'' can't be nested. +% +\begingroup + \catcode `\^^M = \active % + \gdef\flushleft{% + \def\@endjustifycmd{\@endflushleft}% + \def\@eoljustifyaction{\null\hfil\break}% + \let\@firstlinejustifyaction = \relax + \@startjustify % + }% + \gdef\flushright{% + \def\@endjustifycmd{\@endflushright}% + \def\@eoljustifyaction{\break\null\hfil}% + \def\@firstlinejustifyaction{\hfil\null}% + \@startjustify % + }% + \gdef\center{% + \def\@endjustifycmd{\@endcenter}% + \def\@eoljustifyaction{\hfil\break\null\hfil}% + \def\@firstlinejustifyaction{\hfil\null}% + \@startjustify % + }% + % + % We do this before starting any of the justification commands. + \gdef\@startjustify{% + \parskip = 0pt + \catcode`\^^M = \active % + \def^^M{\futurelet\next\@finjustifyreturn}% + % + % \@eateol is called at the beginning of each justified paragraph. + \def\@eateol##1^^M{% + \def\temp{##1}% + \@firstlinejustifyaction % + \ifx\temp\empty\else \temp^^M\fi % + }% + \expandafter\aftergroup\@endjustifycmd % + \checkenv \environmenttrue % + \par\noindent % + \@eateol % + }% + % + % If the next thing is a ^^M, insert \blanklineskipamount glue. Then + % do \@eoljustifyaction (which each justification command defines). + \gdef\@finjustifyreturn{% + \@eoljustifyaction % + \ifx\next^^M% + % Insert extra glue when the \@end... command does the \par. + \def\par{\endgraf\vskip\blanklineskipamount \global\let\par = \endgraf}% + \@endjustifycmd % + % Get back into horizontal mode for the next line. + \noindent % + \@firstlinejustifyaction % + \fi % + }% +\endgroup +% +\def\@endflushleft{\unpenalty{\parfillskip = 0pt plus1fil\par}\ignorespaces}% +\def\@endflushright{% Remove the \hfil\null\break we just put on. + \unskip \setbox0=\lastbox \unpenalty + % We have fil glue at the left of the line; \parfillskip shouldn't + % affect that. + {\parfillskip = 0pt \par}\ignorespaces +}% +\def\@endcenter{% Remove the \hfil\null\break we just put on. + \unskip \setbox0=\lastbox \unpenalty + % We have fil glue at the left of the line; \parfillskip must balance it. + {\parfillskip = 0pt plus1fil \par}\ignorespaces +}% +% +\ifx\@undefined\raggedleft +% like plain's \raggedright except for \parfillskip. +\innernewskip\raggedleftskip \raggedleftskip=0pt plus2em +\def\raggedleft{\leftskip\raggedleftskip \parindent=0pt + \spaceskip.3333em \xspaceskip.5em \parfillskip0pt \relax} +\fi % \raggedleft undefined +% +% +% Automatically-columnated tables. +% +% \makecolumns N/K: organizes the entries on the following N lines into +% K columns. If N is too small, some text beyond the end of the table +% will be incorporated into the table, probably producing an error +% message. If N is too large, some of the entries will appear after the +% table, probably looking very out of place. +% +% You can adjust the position of the table on the page by changing +% \parindent (space to the left of the block) and \hsize (distance from +% the left margin to the right of the block). (No doubt inside a +% group.) And you can allow a page break above the valign by changing +% \abovecolumnspenalty. +% +\newcount\abovecolumnspenalty \abovecolumnspenalty = 10000 +\newcount\@linestogo % Lines remaining to process. +\newcount\@linestogoincolumn % Lines remaining in column. +\newcount\@columndepth % Number of lines in a column. +\newdimen\@columnwidth % Width of each column. +\newtoks\crtok \crtok = {\cr}% +\newcount\currentcolumn +% +% The space matches an end-of-line that will probably be there. +% +\def\makecolumns#1/#2: {\par \begingroup + % Set \@columndepth to the number of items we will put in a column: + % ceiling(N/K), i.e. (N - 1) / K + 1. + \@columndepth = #1 + \advance\@columndepth by -1 + \divide \@columndepth by #2 + \advance\@columndepth by 1 + \@linestogoincolumn = \@columndepth + \@linestogo = #1 + % + % We start in the first column. + \currentcolumn = 1 + % + \def\@endcolumnactions{% + \ifnum \@linestogo<2 + \the\crtok \egroup \endgroup \par % End \valign and \makecolumns. + \else + % We've done one more line out of the total. + \global\advance\@linestogo by -1 + % + % How many left in the column? + % + \ifnum\@linestogoincolumn<2 + % End this column, that was the last line. + \global\advance\currentcolumn by 1 + \global\@linestogoincolumn = \@columndepth + \the\crtok + \else + % Still got more lines to go. + &\global\advance\@linestogoincolumn by -1 + \fi + \fi + }% + % + % Set up to read the table. + % + \makeactive\^^M + \letreturn \@endcolumnactions + % + % Figure out how wide our columns are going to be; each column has + % exactly the same template, so we can use the feature described on + % p.241 of the TeXbook for repeating preambles. + % + \@columnwidth = \hsize + \advance\@columnwidth by -\parindent + \divide\@columnwidth by #2 + \penalty\abovecolumnspenalty + \noindent % It's not a paragraph (usually). + \valign\bgroup + &\hbox to \@columnwidth{\strut \hsize = \@columnwidth ##\hfil}\cr + % + % The next end-of-line starts everything going. +}% +% +% +% +% \numberedfootnote is like plain TeX's \footnote, but automatically +% numbered. When you want to reset the footnote number, say +% \footnotenumber = 0. +% +% We also provide for more general formatting than \footnote: +% \footnotemarkseparation is the space between the reference mark and +% the footnote text; +% \interfootnoteskip is the space between footnotes; +% \everyfootnote is expanded just before we typeset the footnote. +% +% The dimensions of the footnote rule are controlled by +% \footnoterulewidth and \footnoteruleheight (the depth is always zero); +% the space after the rule is \belowfootnoterulespace. +% +\newcount\footnotenumber +\newcount\hlfootlabelnumber +\newdimen\footnotemarkseparation \footnotemarkseparation = .5em +\newskip\interfootnoteskip \interfootnoteskip = 0pt +\newtoks\everyfootnote +\newdimen\footnoterulewidth \footnoterulewidth = 2in +\newdimen\footnoteruleheight \footnoteruleheight = 0.4pt +\newdimen\belowfootnoterulespace \belowfootnoterulespace = 2.6pt +% +\let\@plainfootnote = \footnote +\let\@plainvfootnote = \vfootnote +% Hyperlink labels for forward and back references. +\def\hlfootlabel{FOOT\the\hlfootlabelnumber}% +\def\hlfootbacklabel{FOOTB\the\hlfootlabelnumber}% +% +\def\@eplainfootnote#1{\let\@sf\empty % parameter #2 (the text) is read later + \ifhmode\edef\@sf{\spacefactor\the\spacefactor}\/\fi + \global\advance\hlfootlabelnumber by 1 + \hlstart@impl{foot}{\hlfootlabel}% + \hldest@impl{footback}{\hlfootbacklabel}% + #1% + \hlend@impl{foot}% + \@sf\vfootnote{#1}% +}% +% +\let\footnote\@eplainfootnote +% +\def\vfootnote#1{\insert\footins\bgroup + \interlinepenalty\interfootnotelinepenalty + \splittopskip\ht\strutbox % top baseline for broken footnotes + \advance\splittopskip by \interfootnoteskip + \splitmaxdepth\dp\strutbox + \floatingpenalty\@MM + \leftskip\z@skip \rightskip\z@skip \spaceskip\z@skip \xspaceskip\z@skip + \everypar = {}% + \parskip = 0pt % because of the vskip + % Even if typesetting in multicolumns, do footnotes in normal page width. + % (We don't have any provision in the output routine for having + % footnotes per column, anyway.) + \ifnum\@numcolumns > 1 \hsize = \@normalhsize \fi + \the\everyfootnote + \vskip\interfootnoteskip + \indent\llap{% + \hlstart@impl{footback}{\hlfootbacklabel}% + \hldest@impl{foot}{\hlfootlabel}% + #1% + \hlend@impl{footback}% + \kern\footnotemarkseparation + }% + \footstrut\futurelet\next\fo@t +}% +% +\def\footnoterule{\dimen@ = \footnoteruleheight + \advance\dimen@ by \belowfootnoterulespace + \kern-\dimen@ + \hrule width\footnoterulewidth height\footnoteruleheight depth0pt + \kern\belowfootnoterulespace + \vskip-\interfootnoteskip +}% +% +\def\numberedfootnote{% + \global\advance\footnotenumber by 1 + \@eplainfootnote{$^{\number\footnotenumber}$}% +}% +% +% +% +% Margins. +% +% TeX's primitives determine the type area. But some users prefer to +% think in terms of margins. These definitions allow one to say, for +% example, `\topmargin = 2in', instead of `\voffset=1in\advance\vsize by +% -1in'. Constructions like `\advance\topmargin by 1in' give an error +% message, though, since \topmargin is not a parameter. Instead, the +% macro \advancetopmargin has to be used. +% +\newdimen\paperheight +\ifnum\mag=1000 + \paperheight = 11in % No magnification (yet). +\else + \paperheight = 11truein % We already have a magnification. +\fi +% +\def\topmargin{\afterassignment\@finishtopmargin \dimen@}% +\def\@finishtopmargin{% + \dimen2 = \voffset % Remember the old \voffset. + \voffset = \dimen@ \advance\voffset by -1truein + \advance\dimen2 by -\voffset % Compute the change in \voffset. + \advance\vsize by \dimen2 % Change type area accordingly. +}% +\def\advancetopmargin{% + \dimen@ = 0pt \afterassignment\@finishadvancetopmargin \advance\dimen@ +}% +\def\@finishadvancetopmargin{% + \advance\voffset by \dimen@ + \advance\vsize by -\dimen@ +}% +% +% +\def\bottommargin{\afterassignment\@finishbottommargin \dimen@}% +\def\@finishbottommargin{% + \@computebottommargin % Result in \dimen2. + \advance\dimen2 by -\dimen@ % Compute the change in the bottom margin. + \advance\vsize by \dimen2 % Change the type area. +}% +\def\advancebottommargin{% + \dimen@ = 0pt \afterassignment\@finishadvancebottommargin \advance\dimen@ +}% +\def\@finishadvancebottommargin{% + \advance\vsize by -\dimen@ +}% +% +% Find the current bottom margin, putting the result in \dimen2. +% +\def\@computebottommargin{% + \dimen2 = \paperheight % The total paper size. + \advance\dimen2 by -\vsize % Less the text size. + \advance\dimen2 by -\voffset % Less the offset at the top. + \advance\dimen2 by -1truein % Less the default offset. +}% +% +% +\newdimen\paperwidth +\ifnum\mag=1000 + \paperwidth = 8.5in % No magnification (yet). +\else + \paperwidth = 8.5truein % We already have a magnification. +\fi +% +\def\leftmargin{\afterassignment\@finishleftmargin \dimen@}% +\def\@finishleftmargin{% + \dimen2 = \hoffset % Remember the old \hoffset. + \hoffset = \dimen@ \advance\hoffset by -1truein + \advance\dimen2 by -\hoffset % Compute the change in \hoffset. + \advance\hsize by \dimen2 % Change type area accordingly. +}% +\def\advanceleftmargin{% + \dimen@ = 0pt \afterassignment\@finishadvanceleftmargin \advance\dimen@ +}% +\def\@finishadvanceleftmargin{% + \advance\hoffset by \dimen@ + \advance\hsize by -\dimen@ +}% +% +% +\def\rightmargin{\afterassignment\@finishrightmargin \dimen@}% +\def\@finishrightmargin{% + \@computerightmargin % Result in \dimen2. + \advance\dimen2 by -\dimen@ % Compute the change in the right margin. + \advance\hsize by \dimen2 % Change the type area. +}% +\def\advancerightmargin{% + \dimen@ = 0pt \afterassignment\@finishadvancerightmargin \advance\dimen@ +}% +\def\@finishadvancerightmargin{% + \advance\hsize by -\dimen@ +}% +% +% Find the current right margin, putting the result in \dimen2. +% +\def\@computerightmargin{% + \dimen2 = \paperwidth % The total paper size. + \advance\dimen2 by -\hsize % Less the text size. + \advance\dimen2 by -\hoffset % Less the offset at the left. + \advance\dimen2 by -1truein % Less the default offset. +}% +% +% There is a potential problem when using the margin macros at a true +% dimension and then calling \magnification. So we redefine +% \magnification to address this. +% +\let\@plainm@g = \m@g +\def\m@g{\@plainm@g \paperwidth = 8.5 true in \paperheight = 11 true in}% +% +% +% +% Double column output. +% +% \doublecolumns begins double column output. It can be called +% in the midst of a page. \singlecolumn restores single column +% output. (It would be wrong to require \enddoublecolumns, because +% often one wants double column mode to continue to the end of +% the document.) +% +% The basic approach is that of Appendix E of the TeXbook, p.417. +% David Guichard made significant improvements to my original implementation. +% +% The glue here (the default is intended to be one linespace) is inserted +% before double columns start, and after they end. +% +\newskip\abovecolumnskip \abovecolumnskip = \bigskipamount +\newskip\belowcolumnskip \belowcolumnskip = \bigskipamount +% +% Space between the columns. It can be changed as desired. +\newdimen\gutter \gutter = 2pc +% +% These registers are needed for dealing with switching back and forth. +\newbox\@partialpage +\newdimen\@normalhsize +\newdimen\@normalvsize % The original (before multi-columns) \vsize. +\newtoks\previousoutput +% +% Some synonymous ways to refer to multiple column modes. +\def\quadcolumns{\@columns4}% +\def\triplecolumns{\@columns3}% +\def\doublecolumns{\@columns2}% +\def\begincolumns#1{\ifcase#1\relax \or \singlecolumn \or \@columns2 \or + \@columns3 \or \@columns4 \else \relax \fi}% +\def\endcolumns{\singlecolumn}% +\let\@ndcolumns = \relax +% +% Set this by default so \vfootnote can unconditionally inspect it. +\chardef\@numcolumns = 1 +% +\mathchardef\@ejectpartialpenalty = 10141 +% +% +% \@columns: Start typesetting with #1 columns. +% +% Before we actually start, we have to make sure that there are at least +\chardef\@col@minlines = 3 +% free lines. +% (It could be 2, or even 1, but it might give ugly results; at least one +% line is absolutely necessary, or the output routine might get confused.) +% We have to be careful, so that eg. +% \hbox{TITLE} +% \nobreak +% \doublecolumns +% won't break between the title and the start of the columned output. +% +% To achieve this, we add vskip of fixed size equal to +% @col@minlines * baselineskip +% and then eject the page. +% The output routine then catches the pages ejected: +% 1) if it's a normal page, it is processed by previous output routine; +% 2) if it's the last one, it is saved and the added skip is removed. +% +% When the box is processed according to 1), an underfull vbox can appear, +% but it's not our problem, the manuscript (or its macros) has to be fixed. +% +% Gather this many baselines +\chardef\@col@extralines = 3 +% of additional material per each column than the combined height of the +% columns, before attempting to break the columns. This sometimes +% considerably improves the last column, when it would become too spaced +% out because TeX had to squeeze some lines into the previous columns +% due to unfortunate column breaks. +% +% The larger \@col@extralines, the better, but we don't want to make +% it too large. If there are less than \@col@extralines * num_columns +% lines left before we start gathering these extra lines, we'll hit +% \@endcolumns while gathering material for this page. If the extra +% lines will not actually fit in the columns, we'll have to move them +% to the next page. But we won't move them if there are any +% insertions on this page (see \@balancecolumns), so in such case +% we'll stuff everything on the current page, producing an overfull +% box, even though these extra lines could successfully be moved to +% the next page. +% +\newdimen\@col@extraheight +% +% Another note: all assignments are global; it is not possible to call +% \doublecolumns in a group. +% +\def\@columns#1{% + \@ndcolumns + % + \global\let\@ndcolumns = \@endcolumns + \global\chardef\@numcolumns = #1 + \global\previousoutput = \expandafter{\the\output}% + % + % Grab the page so far (i.e., the material BEFORE \@columns was called) + % and save it in \@partialpage. + \global\output = {% + \ifnum\outputpenalty = -\@ejectpartialpenalty + \dimen@ = \vsize + \advance\dimen@ by \@col@minlines\baselineskip + \global\setbox\@partialpage = + \vbox \ifdim \pagetotal > \vsize to \dimen@ \fi {% + \unvbox255 \unskip + }% + \else + \the\previousoutput + \fi + }% + % + \vskip \abovecolumnskip + \vskip \@col@minlines\baselineskip + % now execute the output routine: + \penalty -\@ejectpartialpenalty + % + % Reset \output to prepare for the first real page break. + \global\output = {\@columnoutput}% + % + \global\@normalhsize = \hsize + \global\@normalvsize = \vsize + % + % Figure out how wide the columns should be -- for n columns, + % decrement by n - 1 gutters. + \count@ = \@numcolumns + \advance\count@ by -1 + \global\advance\hsize by -\count@\gutter + \global\divide\hsize by \@numcolumns + % + % Compute \vsize based on what's already on the page + % and the number of columns. Also change the mag factor for insertions. + % + \advance\vsize by -\ht\@partialpage + % + \advance\vsize by -\ht\footins + \ifvoid\footins\else \advance\vsize by -\skip\footins \fi + \multiply\count\footins by \@numcolumns + % + \advance\vsize by -\ht\topins + \ifvoid\topins\else \advance\vsize by -\skip\topins \fi + \multiply\count\topins by \@numcolumns + % + \global\vsize = \@numcolumns\vsize + % + % Gather some extra material, to improve the last column. + \@col@extraheight=\@col@extralines\baselineskip + \multiply\@col@extraheight by \@numcolumns + \global\advance\vsize by \@col@extraheight +}% +% +% When this is invoked box 255 contains just the right amount of +% material, whether triggered by an output routine or a change in the +% number of columns. Because columns have to contain an integral number +% of lines of type, we take a bit of care with balancing the heights of +% the columns to prevent either losing material or having a very short +% last column. +% +% When a page ends due to \bye or \eject, box 255 will contain lots of +% white space, so the columns will not look balanced. To fix this use +% \singlecolumn before ending the page. +% +% [gutterbox material added by AHL on 5 November 1997.] +% \gutterbox is a hook to enable the placement of arbitrary vertical +% material in the gutter between columns. For example, to put a +% vertical line between the columns you could say +% +% \def\gutterbox{\vbox to \dimen0{\vfil\hbox{\vrule height\dimen0}\vfil}}% +% +% The dimension counter \dimen0 contains the height of the column. +% +% By default, we define \gutterbox to be "empty": +\def\gutterbox{\vbox to \dimen0{\vfil\hbox{\hfil}\vfil}}% +% +\def\@columnsplit{% + \splittopskip = \topskip + \splitmaxdepth = \baselineskip + % + % \dimen@ should be the height that columns on this page should + % have, i.e., the height of the page (\singlecolumvsize) minus + % single-column material, which includes insertions. (If you want + % your insertions to respect the columns, you will have to change + % the output routine.) If you add more insertions, they should be + % taken into account in \@columns and \@endcolumns. + % + % Unfortunately, we lose on flexible glue because we must + % \vsplit to a . + % + % Split the long scroll into columns. + \begingroup + % We do not want to see underfull \vbox messages unless the final + % page is underfull. + \vbadness = 10000 + % + % The first (leftmost) column. + %d\message{^^J starting columnsplit, splitting to \the\dimen@}% + %d\showbox255 + \global\setbox1 = \vsplit255 to \dimen@ \global\wd1 = \hsize + %d\message{^^J split off to this box1:}% + %d\showbox1 + % + % The second column. + \global\setbox3 = \vsplit255 to \dimen@ \global\wd3 = \hsize + % + \ifnum\@numcolumns > 2 + % The third column, if requested. + \global\setbox5 = \vsplit255 to \dimen@ \global\wd5 = \hsize + \fi + \ifnum\@numcolumns > 3 + % The fourth column, likewise if requested. + \global\setbox7 = \vsplit255 to \dimen@ \global\wd7 = \hsize + \fi + \endgroup + % + % Set up \box255 with the real output page, as the previous output + % routine expects. + \setbox0 = \box255 + \global\setbox255 = \vbox{% + \unvbox\@partialpage + \ifcase\@numcolumns \relax\or\relax + \or \hbox to \@normalhsize{\box1\hfil\gutterbox\hfil\box3}% + \or \hbox to \@normalhsize{\box1\hfil\gutterbox\hfil\box3% + \hfil\gutterbox\hfil\box5}% + \or \hbox to \@normalhsize{\box1\hfil\gutterbox\hfil\box3% + \hfil\gutterbox\hfil\box5% + \hfil\gutterbox\hfil\box7}% + \fi + }% + % + % Save what's left over in a private register before calling their + % output routine. + \setbox\@partialpage = \box0 +}% +% +% Our output routine splits the columns and then calls the previous one. +% +\def\@columnoutput{% + %d\message{^^J starting columnoutput, ht255: \the\ht255}% + \dimen@ = \ht255 + \advance\dimen@ by -\@col@extraheight + %d\message{^^J minus col@extraheight: \the\@col@extraheight}% + \divide\dimen@ by \@numcolumns + \@columnsplit + \@recoverclubpenalty + \hsize = \@normalhsize % Local to \output's group. + \vsize = \@normalvsize + \the\previousoutput + % + % Put back what didn't fit. + \unvbox\@partialpage + \penalty\outputpenalty + % + % The correct vsize is the original vsize times the + % number of columns, plus the ``extra height''. + \global\vsize = \@numcolumns\@normalvsize + \global\advance\vsize by \@col@extraheight +}% +% +% Go back to single-column typesetting. Assume \doublecolumns has +% been called. +% +\def\singlecolumn{% + \@ndcolumns + \chardef\@numcolumns = 1 + \vskip\belowcolumnskip + \nointerlineskip +}% +% +\newbox\@singlecolumnbox +\newdimen\column@pagegoal +\newdimen\column@vsize +% +\def\@endcolumns{% + \global\let\@ndcolumns = \relax + \par % Shouldn't start in horizontal mode. + % Save the combined height of the columns and the page goal. We + % have to be careful -- the last line of the multi-column material + % might have taken \pagetotal just over \pagegoal, in which case we + % have to use \pagegoal for the height, otherwise the box produced + % when splitting the columns will not fit on the page. + \column@pagegoal = \pagegoal + \advance\column@pagegoal by-\@col@extraheight + \ifdim \pagetotal > \column@pagegoal + \column@vsize = \column@pagegoal + \else + \column@vsize = \pagetotal + \fi + % Grab whatever is left of the multi-column material. + \global\output = {\global\setbox1 = \box255}% + \pagegoal = \pagetotal + \break % Exercise the page builder, i.e., \output. + \setbox2 = \box1 % Save material in box2 in case of overflow. + % We won't need \columnoutput anymore. + \global\output = \expandafter{\the\previousoutput}% + % Save single column material (in case the multi-column material + % ends on the same page where it starts; otherwise \@partialpage + % will be void). This also voids \@partialpage. + \setbox\@singlecolumnbox = \box\@partialpage + % Try to fit what's left into the columns. + \@balancecolumns +}% +% +% There are many caveats when balancing columns at the end of +% multi-column material. The core of all problems is the following. +% Eplain collects multi-column material in one long scroll until the +% scroll's length is at least \vsize * \@numcolumns. But when we try +% to split that scroll into columns, there is no guarantee that all +% the collected material will fit (for example, because a column break +% occured inside a large unbreakable block, so we had to carry it over +% to the next column and stretch out the previous column). So every +% time we call \@columnsplit, we should expect it to leave something +% for us in \@partialpage. +% +% Now, what should we do with these left-overs? We increase column +% height a bit and try to split the scroll again, and so on until +% everything fits. +% +% However, while doing this, we might increase column height so much +% that the columns no longer fit on a page. What we do then is output +% the highest fitting columns, break the page and then restart the +% whole process on what's left. +% +% However, there's another catch -- if a page contains insertions, +% there's a slight chance that the footnotes or top insertions were +% inserted by the multi-column material we are going to carry over to +% the next page, so those footnotes or top insertions will appear one +% page ahead of their references. The worst thing is that the user +% will get no warning of this. Therefore, when we have left-overs on +% a page with insertions, we just stuff them into columns to produce +% an overfull box warning. +% +\def\@balancecolumns{% + % Split the scroll to the new column height. + \global\setbox255 = \copy2 % Retrieve what the fake \output set. + \dimen@ = \column@vsize + \divide\dimen@ by \@numcolumns + \@columnsplit + % + \ifvoid\@partialpage + % Everything fits -- we're done. + \global\vsize = \@normalvsize + \global\hsize = \@normalhsize + \dump@balanced@columns + \let\next\relax + \else + % There is some left-over. Increase column height. + \advance \column@vsize by \@numcolumns pt + % Check what we should do with the left-over. + \test@spill@columns + \ifspill@columns + % We are to break the page here. Make up a page from the + % single-column material followed by the columns that we've + % already split off into \box255. + \begingroup + \vsize = \@normalvsize + \hsize = \@normalhsize + \dump@balanced@columns + \break + \@recoverclubpenalty + \endgroup + % Now put back what didn't fit and process it recursively. + \unvbox\@partialpage + \let\next\@endcolumns + \else + % We should continue incrementing column height. + \setbox0=\box\@partialpage % Merely to void \@partialpage. + \let\next\@balancecolumns + \fi + \fi + \next +}% +% +\def\dump@balanced@columns{% + \ifvoid\topins\else\topinsert\unvbox\topins\endinsert\fi + \unvbox\@singlecolumnbox + % Avoid interline glue here -- we didn't (couldn't) account for it + % when assessing \vsize for the columns in \@columns, which means + % the columns may not fit if we also add the interline glue. + \nointerlineskip + \box255 +}% +% +% If we hit page bottom while balancing columns and there are no +% insertions on the page, we can let the left-over spill to the next +% page. If there are insertions on the page, we shouldn't let +% \@partialpage to the next page, to avoid separating a possible +% reference from an insertion. The following flag and test are to +% check these conditions. +\newif\ifspill@columns +\def\test@spill@columns{% + \spill@columnsfalse + \ifdim \column@vsize > \column@pagegoal + \ifvoid\footins + \ifvoid\topins + \spill@columnstrue + \fi + \fi + \fi +}% +% +% [\columnfill] +% We don't have any way to force a column eject, since the \output +% routine is only prepared to split up a full page of material. Instead, +% we provide the following as a guess at enough space to fill up the +% current column. +% +% [April 30, 1998] This definition is from +% Helmut Jarausch with some +% modifications by A. Lewenberg . +% +% Here is the main difficulty: when \vsplitting the long page into the +% component columns, \vsplit prepends to the top of each column glue +% in the amount \topskip - (height of top box). But this happens +% in the output routine _after_ the \columnfill does its +% calculations. The result of this is that if we are not careful +% \columnfill will insert too much space attempting to ``eject'' the +% current column. There is no simple way around this, so what I have +% done is have is make \columnfill insert less space than needed, and +% then not allow any \club lines by setting \clubpenalty to its +% maximum value. Not a pretty solution, but until something better +% comes along, it will have to do. +% +\def\@saveclubpenalty{% save the current value of \clubpenalty + \edef\@recoverclubpenalty{% + \global\clubpenalty=\the\clubpenalty\relax% + \global\let\noexpand\@recoverclubpenalty\relax + }% the \noexpand handles infinite self-reference +}% +\let\@recoverclubpenalty\relax +\newdimen\temp@dimen +\def\columnfill{% + \par + \dimen@ = \pagetotal % The height of the text so far. + %d\message{^^J pagetotal start (dimen@): \the\dimen@}% + % + \temp@dimen = \vsize % = \@numcolumns * columnheight + %d\message{^^J temp@dimen (total height): \the\temp@dimen}% + % + \advance\temp@dimen by -\@col@extraheight + %d\message{^^J reducing temp@dimen \the\temp@dimen (-@col@extraheight)}% + % + \divide\temp@dimen by \@numcolumns % Compute column height + %d\message{^^J col height (tempdimen@): \the\temp@dimen}% + % + \loop + %d\message{^^J looping}% + \ifdim \dimen@ > \temp@dimen % more material than a column? + \advance \dimen@ by -\temp@dimen + \advance \dimen@ by \topskip % fudge factor + %d\message{^^J reducing dimen@ to \the\dimen@ (tempdimen@ + \the\topskip)}% + \repeat + \advance \temp@dimen by -\dimen@ + %d\message{^^J reducing temp@dimen to \the\temp@dimen (-dimen@)}% + % + \advance \temp@dimen by -\prevdepth + %d\message{ reducing temp@dimen to \the\temp@dimen (-prevdepth)}% + % + \@saveclubpenalty + \clubpenalty=10000\relax + \hrule height\temp@dimen width0pt depth0pt\relax % fill space with rule + \nointerlineskip + \par + \nointerlineskip + \allowbreak \vfil % To allow a page break here. + \relax +}% +% +% +% Hypertext links support. +% +% Hyperlink destinations (driver-independent code). +% +% \hldest{TYPE}{OPTIONS}{LABEL} defines a hyperlink destination +% LABEL. OPTIONS is a comma-separated list of option assignments of +% the form `opt=value'; permitted values for TYPE and OPTIONS depend +% on selected hyperlink driver. +% +% \hldest will be \let to \@hldest by \enablehyperlinks. TYPE, +% OPTIONS and LABEL will be read by \hl@getparam. +\def\@hldest{% + \def\hl@prefix{hldest}% + \let\after@hl@getparam\hldest@aftergetparam + % Start the group which will isolate option settings. It will be + % ended in \hldest@aftergetparam + \begingroup + \hl@getparam +}% +% This actually produces hyperlink destination. It will be called at +% the end of \hl@getparam, after the parameters are parsed. +\def\hldest@aftergetparam{% + \ifvmode + % In vertical mode we don't raise the destination, so it can go + % directly into the vertical list. + \hldest@driver + \else + % In horizontal mode, the destination is raised \hldest@opt@raise + % above the baseline and placed inside a zero-width/height/depth + % box; the box is surrounded by \allowhyphens in case it is + % placed next to a word, to allow hyphenation of that word. + \allowhyphens + \smash{\ifx\hldest@opt@raise\empty \else \raise\hldest@opt@raise\fi + \hbox{\hldest@driver}}% + \allowhyphens + \fi + % End the group which was isolating option settings (it was started + % in \@hldest). + \endgroup +}% +% +% Hyperlinks (driver-independent code). +% +% \hlstart{TYPE}{OPTIONS}{LABEL} starts a hyperlink to destination +% LABEL. OPTIONS is a comma-separated list of option assignments of +% the form `opt=value'; permitted values of TYPE and OPTIONS depend on +% selected hyperlink driver. End the link with \hlend. +% +% \hlstart will be \let to \@hlstart by \enablehyperlinks. TYPE, +% OPTIONS and LABEL will be read by \hl@getparam. +\def\@hlstart{% + \leavevmode + \def\hl@prefix{hl}% + \let\after@hl@getparam\hlstart@aftergetparam + % Start the group which will isolate option settings and color + % changes. It will be ended in \@hlend + \begingroup + \hl@getparam +}% +% +\def\hlstart@aftergetparam{% + % Set the color for the link. + \ifx\color\undefined \else + \ifx\hl@opt@color\empty \else + \ifx\hl@opt@colormodel\empty + \edef\temp{\noexpand\color{\hl@opt@color}}% + \else + \edef\temp{\noexpand\color[\hl@opt@colormodel]{\hl@opt@color}}% + \fi + \temp + \fi + \fi + % Call the driver. + \hl@driver +}% +% \hlend will be \let to \@hlend by \enablehyperlinks. \@hlend will +% be defined by a driver. +% +% Macros which are used commonly by \hldest and \hlstart to parse and +% save parameters. \hl@prefix must be set to `hldest' by \hldest and +% to `hl' by \hlstart. +% +% \hl@getparam{TYPE}{OPTIONS}{LABEL} reads, parses and saves the +% parameters for \hldest or \hlstart into \@hltype, \hl[dest]@opt@... +% and \@hllabel. After doing that it calls \after@hl@getparam which +% should be defined by \@hldest and \@hlstart to produce destination / +% link using the saved parameters. +\def\hl@getparam#1#2{% We'll read #3 (LABEL) later. + % Save TYPE in \@hltype (use default if empty). + \edef\@hltype{#1}% + \ifx\@hltype\empty + \expandafter\let\expandafter\@hltype + \csname \hl@prefix @type\endcsname + \fi + % For each supported destination / link type TYPE, a driver should + % define \hl[dest]@typeh@TYPE handler. + \expandafter\ifx\csname \hl@prefix @typeh@\@hltype\endcsname \relax + \errmessage{Invalid hyperlink type `\@hltype'}% + \fi + % \for will expand #2 once so user can pass a shortcut macro. We + % also ignore empty \hl@arg, so that the following + % \hldest{TYPE}{\myopt,height=200pt}{LABEL} + % would be legal even when \myopt happens to be empty. + \For\hl@arg:=#2\do{% + \ifx\hl@arg\empty \else + \expandafter\hl@set@opt\hl@arg=,% + \fi + }% + % Now read the third argument, LABEL. Do so inside a group with + % \uncatcodespecials, to allow `#' and `~' in it (LABEL can be a URL + % for some link types). + \bgroup + \uncatcodespecials + \catcode`\{=1 \catcode`\}=2 + \@hl@getparam +}% +% +\def\@hl@getparam#1{% + \egroup + % Save LABEL in \@hllabel. + \edef\@hllabel{#1}% + % Execute the commands specific to destination / link + \after@hl@getparam + % Ignore spaces after \hlstart and \hldest. + \ignorespaces +}% +% Parse and set a (default, not a group) option. +\def\hl@set@opt#1=#2,{% + % For each supported option OPTION, a driver should define + % \hl[dest]@opt@OPTION. + \expandafter\ifx\csname \hl@prefix @opt@#1\endcsname \relax + \errmessage{Invalid hyperlink option `#1'}% + \fi + % Save the value of the option. + \if ,#2, % if #2 is empty, complain. + \errmessage{Missing value for option `#1'}% + \else + % Remove a trailing =. + \def\temp##1={##1}% + \expandafter\edef\csname \hl@prefix @opt@#1\endcsname{\temp#2}% + \fi +}% +% \hl{dest,start,end}@impl{GROUP}{LABEL} will generate `implicit' destination / +% hyperlink, if the user has not turned off this kind of implicit +% destinations / hyperlinks. This is used by Eplain's cross-reference +% macros. +\def\hldest@impl#1{% + \expandafter\ifcase\csname hldest@on@#1\endcsname + \relax\expandafter\gobble + \else + \toks@=\expandafter{\csname hldest@type@#1\endcsname}% + \toks@ii=\expandafter{\csname hldest@opts@#1\endcsname}% + \edef\temp{\noexpand\hldest{\the\toks@}{\the\toks@ii}}% + \expandafter\temp + \fi +}% +\def\hlstart@impl#1{% + \expandafter\ifcase\csname hl@on@#1\endcsname + % Still produce \leavevmode, to be consistent with \hloff. + \leavevmode\expandafter\gobble + \else + \toks@=\expandafter{\csname hl@type@#1\endcsname}% + \toks@ii=\expandafter{\csname hl@opts@#1\endcsname}% + \edef\temp{\noexpand\hlstart{\the\toks@}{\the\toks@ii}}% + \expandafter\temp + \fi +}% +\def\hlend@impl#1{% + \expandafter\ifcase\csname hl@on@#1\endcsname + \else + \hlend + \fi +}% +% +% Setting options and types. +% +\def\hl@asterisk@word{*}% +\def\hl@opts@word{opts}% +\newif\if@params@override +% We define hyperlink / destination groups. A group is a macro or a +% group of macros which implicitly generate hyperlink / destination. +% The user can set parameters for each group individually, as well as +% the default parameters, with the macros defined below. Group +% settings will override the default hyperlink / destination +% parameters. +\def\hldest@groups{definexref,xrdef,li,eq,bib,foot,footback,idx}% +\def\hl@groups{ref,xref,eq,cite,foot,footback,idx,url,hrefint,hrefext}% +% \hldesttype [GROUPS]{VALUE} +% \hldestopts [GROUPS]{VALUE} +% \hltype [GROUPS]{VALUE} +% \hlopts [GROUPS]{VALUE} +% +% Set hyperlink or destination parameter (type / opts) to VALUE for +% each group in GROUPS. An empty `group' will set default value for +% the parameter. A star (*) `group' stands for all groups (except the +% empty `group'). If the macro is followed by an exclamation mark +% (like \hlopts!...), the parameters will be overridden; otherwise, +% they will be updated (this has effect only on group option list). +\def\hldesttype{% + \def\hl@prefix{hldest}% + \def\hl@param{type}% + \let\hl@all@groups\hldest@groups + \futurelet\hl@excl\hl@param@read@excl +}% +\def\hldestopts{% + \def\hl@prefix{hldest}% + \def\hl@param{opts}% + \let\hl@all@groups\hldest@groups + \futurelet\hl@excl\hl@param@read@excl +}% +\def\hltype{% + \def\hl@prefix{hl}% + \def\hl@param{type}% + \let\hl@all@groups\hl@groups + \futurelet\hl@excl\hl@param@read@excl +}% +\def\hlopts{% + \def\hl@prefix{hl}% + \def\hl@param{opts}% + \let\hl@all@groups\hl@groups + \futurelet\hl@excl\hl@param@read@excl +}% +\def\hl@param@read@excl{% + \ifx!\hl@excl + \let\next\hl@param@read@opt@arg + \@params@overridetrue + \else + \def\next{\hl@param@read@opt@arg{!}}% + \@params@overridefalse + \fi + \next +}% +\def\hl@param@read@opt@arg#1{% #1 is the `!', ignore it. + \@getoptionalarg\hl@setparam +}% +% Set the parameter \hl@param to #1 for each group in \@optionalarg. +% This will become \hl@setparam in \enablehyperlinks. +\def\@hl@setparam#1{% + \ifx\@optionalarg\empty + \hl@setparam@default{#1}% Set default. + \else + % If we find an asterisk in the list, we have no choice but to + % finish the list and then call \hl@setparam again, now with + % \hl@all@groups for the list of groups. + \let\hl@do@all@groups\gobble +% + \For\hl@group:=\@optionalarg\do{% + \ifx\hl@group\hl@asterisk@word + \def\hl@do@all@groups{\let\@optionalarg\hl@all@groups \hl@setparam}% + \else + \hl@setparam@group{#1}% + \fi + }% +% + \hl@do@all@groups{#1}% + \fi +}% +% Set a parameter (\hl@param) for one group (\hl@group) to the value +% (#1). The group may be empty, in which case we call +% \hl@setparam@default +\def\hl@setparam@group#1{% + \ifx\hl@group\empty + \hl@setparam@default{#1}% + \else + \expandafter\ifx\csname\hl@prefix @\hl@param @\hl@group\endcsname\relax + \errmessage{Hyperlink group `\hl@prefix:\hl@param:\hl@group' is not defined}% + \fi + \ifx\hl@param\hl@opts@word + % For the `opts' parameter, we want to expand the first token of + % #1 once, in case the user passed a macro containing the option + % list. Even if we simply need to override the old option list, + % we still call \hl@update@opts@with@list to go through the + % options and trim possible leading space token in option keys. + \if@params@override + \expandafter\let\csname\hl@prefix @\hl@param @\hl@group\endcsname\empty + \fi + \hl@update@opts@with@list{#1}% #1 will be used in the \for + % loop, so it will be expanded once. + \else + % Do not use \edef here to define the parameter, so the user can + % define it to, e.g., \normalbaselineskip, and make the parameter + % adjustable to a situation. + \ece\def{\hl@prefix @\hl@param @\hl@group}{#1}% + \fi + \fi +}% +% Set default parameter values. We have to treat `opts' (list of +% options) specially, because for option defaults we don't store a +% list of options (like we do for the group options) but set each +% option individually. +\def\hl@setparam@default#1{% + \ifx\hl@param\hl@opts@word + % `opts'. + \For\hl@opt:=#1\do{% + \ifx\hl@opt\empty \else + \expandafter\hl@set@opt\hl@opt=,% + \fi + }% + \else + % Everything except `opts'. + \expandafter\ifx\csname\hl@prefix @\hl@param\endcsname\relax + \message{Default hyperlink parameter `\hl@prefix:\hl@param' is not defined}% + \fi + % Should not use \edef, so the user could define this to, e.g., + % \normalbaselineskip, to make the parameter adjustable to a + % situation. + \ece\def{\hl@prefix @\hl@param}{#1}% + \fi +}% +% For each option in the list (#1), call \hl@update@opts@with@opt to update +% the group's option list (\csname\hl@prefix @opts@ \hl@group\endcsname) +% with this new option. +\def\hl@update@opts@with@list#1{% + % Start with the current list of the group. + \global\expandafter\let\expandafter\hl@update@new@list + \csname \hl@prefix @opts@\hl@group\endcsname + % We have to isolate the \for loop inside a (TeX) group, to avoid + % clashes with the loop in \hl@setparam + \begingroup + \For\hl@opt:=#1\do{% + \hl@update@opts@with@opt + }% + \endgroup + % Save the final list back in the option list for the group. + \ece\let{\hl@prefix @opts@\hl@group}\hl@update@new@list +}% +% Go through the option list (\hl@update@new@list) and construct the +% new list (in \hl@update@new@list), replacing the old definition of +% the option with the new one (\hl@opt). +\def\hl@update@opts@with@opt{% + % Save the old list and the new option. + \global\let\hl@update@old@list\hl@update@new@list + \global\let\hl@update@new@list\empty + \global\let\hl@update@new@opt\hl@opt + % Get the key of the new option and save it. + \expandafter\hl@parse@opt@key\hl@opt=,% + \let\hl@update@new@key\hl@update@key + % We will set this to real comma after the first entry. + \global\let\hl@update@comma\empty + % We have to isolate the \for loop inside a (TeX) group, to avoid + % clashes with the loop in \hl@update@opts@with@list + \begingroup + \for\hl@opt:=\hl@update@old@list\do{% + \ifx\hl@opt\empty \else % Skip empty `options'. + % Get the key of this option. + \expandafter\hl@parse@opt@key\hl@opt=,% + % If the key matches, replace the option definition with the + % new definition, otherwise, repeat the old definition. + \toks@=\expandafter{\hl@update@new@list}% + \ifx\hl@update@key\hl@update@new@key + \ifx\hl@update@new@opt\empty \else % Skip multiple options. + \toks@ii=\expandafter{\hl@update@new@opt}% + \xdef\hl@update@new@list{\the\toks@\hl@update@comma\the\toks@ii}% + \global\let\hl@update@new@opt\empty + \global\def\hl@update@comma{,}% + \fi + \else + \toks@ii=\expandafter{\hl@opt}% + \xdef\hl@update@new@list{\the\toks@\hl@update@comma\the\toks@ii}% + \global\def\hl@update@comma{,}% + \fi + \fi + }% + \endgroup + % If nothing was replaced, add the new option to the end of the new list. + \ifx\hl@update@new@opt\empty \else + \toks@=\expandafter{\hl@update@new@list}% + \toks@ii=\expandafter{\hl@update@new@opt}% + \xdef\hl@update@new@list{\the\toks@\hl@update@comma\the\toks@ii}% + \fi +}% +% Parse the key of the option and save it in \hl@update@key +\def\hl@parse@opt@key#1=#2,{\def\hl@update@key{#1}}% +% +% Default and group parameters (options and types). +% +% Option `raise' will determine how much to raise hyperlink +% destinations above the baseline. It will be supported by all +% drivers, since it is handled outside the drivers, in +% \hldest@aftergetparam. +\def\hldest@opt@raise{\normalbaselineskip}% +% Options `colormodel' and `color' will also be handled outside the +% drivers, in \hlstart@aftergetparam. +\def\hl@opt@colormodel{cmyk}% +\def\hl@opt@color{0.28,1,1,0.35}% +% +% Parameters for destinations and links produced implicitly by +% cross-reference macros. Note that each driver will additionally +% define \hldest@type and \hl@type parameters which will be used when +% one of the below is empty, and default values for destination and +% link options (which are driver-specific). +% +% Destination on/off flags (0=off, 1=on). Changing them here has no +% effect, modify \enablehyperlinks to set defaults. +\def\hldest@on@definexref{0}% +\def\hldest@on@xrdef{0}% +\def\hldest@on@li{0}% +\def\hldest@on@eq{0}% \eqdef and friends +\def\hldest@on@bib{0}% \biblabelprint (BibTeX) +\def\hldest@on@foot{0}% \footnote / \numberedfootnote +\def\hldest@on@footback{0}% back-ref for \footnote / \numberedfootnote +\def\hldest@on@idx{0}% both `page' dests and `exact' dests +% Types of destinations. +\let\hldest@type@definexref\empty +\let\hldest@type@xrdef\empty +\let\hldest@type@li\empty +\let\hldest@type@eq\empty % \eqdef and friends +\let\hldest@type@bib\empty % \biblabelprint (BibTeX) +\let\hldest@type@foot\empty % \footnote / \numberedfootnote +\let\hldest@type@footback\empty % back-ref for \footnote / \numberedfootnote +\let\hldest@type@idx\empty % both `page' dests and `exact' dests +% Options for destinations. +\let\hldest@opts@definexref\empty +\let\hldest@opts@xrdef\empty +\let\hldest@opts@li\empty +\def\hldest@opts@eq{raise=1.7\normalbaselineskip}% \eqdef and friends +\let\hldest@opts@bib\empty % \biblabelprint (BibTeX) +\let\hldest@opts@foot\empty % \footnote / \numberedfootnote +\let\hldest@opts@footback\empty % back-ref for \footnote / \numberedfootnote +\let\hldest@opts@idx\empty % both `page' dests and `exact' dests +% +% Hyperlink on/off flags (0=off, 1=on). Changing them here has no +% effect, modify \enablehyperlinks to set defaults. +\def\hl@on@ref{0}% \refn and \xrefn, \ref, \refs +\def\hl@on@xref{0}% +\def\hl@on@eq{0}% \eqref and \eqrefn +\def\hl@on@cite{0}% \cite (BibTeX) +\def\hl@on@foot{0}% \footnote / \numberedfootnote +\def\hl@on@footback{0}% back-reference for \footnote / \numberedfootnote +\def\hl@on@idx{0}% +\def\hl@on@url{0}% \url from url.sty +\def\hl@on@hrefint{0}% \href with internal #labels +\def\hl@on@hrefext{0}% \href with external labels (URLs) +% Types of links. +\let\hl@type@ref\empty % \refn and \xrefn, \ref, \refs +\let\hl@type@xref\empty +\let\hl@type@eq\empty % \eqref and \eqrefn +\let\hl@type@cite\empty % \cite (BibTeX) +\let\hl@type@foot\empty % \footnote / \numberedfootnote +\let\hl@type@footback\empty % back-reference for \footnote / \numberedfootnote +\let\hl@type@idx\empty +\let\hl@type@url\empty % \url from url.sty (this will be set to `url' by + % drivers which support the `url' type) +\let\hl@type@hrefint\empty % \href with internal #labels +\let\hl@type@hrefext\empty % \href with external labels (URLs) (this + % will be set to `url' by drivers which support the `url' type) +% Options for links. +\let\hl@opts@ref\empty % \refn and \xrefn, \ref, \refs +\let\hl@opts@xref\empty +\let\hl@opts@eq\empty % \eqref and \eqrefn +\let\hl@opts@cite\empty % \cite (BibTeX) +\let\hl@opts@foot\empty % \footnote / \numberedfootnote +\let\hl@opts@footback\empty % back-reference for \footnote / \numberedfootnote +\let\hl@opts@idx\empty +\let\hl@opts@url\empty % \url from url.sty +\let\hl@opts@hrefint\empty % \href with internal #labels +\let\hl@opts@hrefext\empty % \href with external labels (URLs) +% +% \@hlon[GROUPS] +% \@hloff[GROUPS] +% \@hldeston[GROUPS] +% \@hldestoff[GROUPS] +% \@@hlon +% \@@hloff +% \@@hldeston +% \@@hldestoff +% +% Macros to switch hyperlinks / destinations on/off. +% +% The optional arg is the list of groups. It can contain a star (*) +% which will make the macros affect all groups (but not the low-level +% macros \hlstart, \hlend and \hldest). +% +% \@hlon, \@hldeston, \@hloff and \@hldestoff will turn low-level +% macros on/off only when they are used either without the optional +% arg or with an empty `group' in the optional arg, otherwise only the +% specified groups are affected. +% +% The single-`@' variants (\@hl...) are for the user. In your macros, +% if you want to (temporarily) turn low-level macros on/off, it's +% better to use the double-`@' variants (\@@hl...), because they are +% much faster and won't clobber \@optionalarg or anything else. +% +\def\@hlon{\@hlonoff@value@stub{hl}\@@hlon1 }% +\def\@hloff{\@hlonoff@value@stub{hl}\@@hloff0 }% +\def\@hldeston{\@hlonoff@value@stub{hldest}\@@hldeston1 }% +\def\@hldestoff{\@hlonoff@value@stub{hldest}\@@hldestoff0 }% +% +\def\@hlonoff@value@stub#1#2#3{% + \def\hl@prefix{#1}% + \let\hl@on@empty#2% + \def\hl@value{#3}% + \expandafter\let\expandafter\hl@all@groups + \csname \hl@prefix @groups\endcsname + \@getoptionalarg\@finhlswitch +}% +% +\def\@finhlswitch{% + \ifx\@optionalarg\empty + \hl@on@empty + \fi + % If we find an asterisk in the list, we have no choice but to + % finish the list and then call \@finhlswitch again, now with + % \hl@all@groups for the list of groups. + \let\hl@do@all@groups\relax +% + \For\hl@group:=\@optionalarg\do{% + \ifx\hl@group\hl@asterisk@word + \let\@optionalarg\hl@all@groups + \let\hl@do@all@groups\@finhlswitch + \else + \ifx\hl@group\empty + \hl@on@empty + \else + \expandafter\ifx\csname\hl@prefix @on@\hl@group\endcsname \relax + \errmessage{Hyperlink group `\hl@prefix:on:\hl@group' + is not defined}% + \fi + \ece\edef{\hl@prefix @on@\hl@group}{\hl@value}% + \fi + \fi + }% +% + \hl@do@all@groups +}% +% Turn low-level macros on/off. +\def\@@hlon{% + \let\hlstart\@hlstart + \let\hlend\@hlend +}% +\def\@@hloff{% + \def\hlstart##1##2##3{\leavevmode\ignorespaces}% + \let\hlend\relax +}% +\def\@@hldeston{% + \let\hldest\@hldest +}% +\def\@@hldestoff{% + \def\hldest##1##2##3{\ignorespaces}% +}% +% +% Hyperlink drivers. +% +% \enablehyperlinks[OPTIONS] will enable hyperlinks. OPTIONS is a +% list of comma-separated options. An option is one of the following: +% +% idxexact Point index links to exact locations of the term +% idxpage Point index links to pages with the term (default) +% idxnone No links for index entries +% Force the hyperlink driver +% +% If is omitted, appropriate driver will be detected, if +% possible; if not, we fall back on `hypertex'. +\def\hl@idxexact@word{idxexact}% +\def\hl@idxpage@word{idxpage}% +\def\hl@idxnone@word{idxnone}% +\def\hl@raw@word{raw}% +% +\def\enablehyperlinks{\@getoptionalarg\@finenablehyperlinks}% +\def\@finenablehyperlinks{% + \let\hl@selecteddriver\empty + % By default we generate `idxpage' index hyperlinks. + \def\hldest@place@idx{0}% + % Go through the option list. + \for\hl@arg:=\@optionalarg\do{% + \ifx\hl@arg\hl@idxexact@word + \def\hldest@place@idx{1}% + \else + \ifx\hl@arg\hl@idxnone@word + \def\hldest@place@idx{-1}% + \else + \ifx\hl@arg\hl@idxpage@word + \def\hldest@place@idx{0}% + \else + \let\hl@selecteddriver\hl@arg + \fi + \fi + \fi + }% + % Check the driver name. + \ifx\hl@selecteddriver\empty + % The user did not specify a driver, detect. + \ifpdf + \def\hl@selecteddriver{pdftex}% + \message{^^JEplain: using `pdftex' hyperlink driver.}% + \else + \def\hl@selecteddriver{hypertex}% + \message{^^JEplain: using `hypertex' hyperlink driver.}% + \fi + \else + % Check that the requested driver's initialization routine is + % available. + \expandafter\ifx\csname hldriver@\hl@selecteddriver\endcsname \relax + \errmessage{No hyperlink driver `\hl@selecteddriver' available}% + \fi + \fi + % Enable \hltype, \hlopts, \hldest and \hldestopts now (the driver's + % initialization routine may change this). + \let\hl@setparam\@hl@setparam + % Call the driver's initialization routine. + \csname hldriver@\hl@selecteddriver\endcsname + % Driver should not be changed later. + \def\@finenablehyperlinks{\errmessage{Hyperlink driver `\hl@selecteddriver' + already selected}}% + % Free memory taken up by the drivers. + \let\hldriver@nolinks\undefined + \let\hldriver@hypertex\undefined + \let\hldriver@pdftex \undefined + \let\hldriver@dvipdfm\undefined + % The user can use these to turn the links / destinations on/off + % (see comments to the driver `nolinks'). + \let\hloff\@hloff + \let\hlon\@hlon + \let\hldestoff\@hldestoff + \let\hldeston\@hldeston + % By default turn everything on except the footnotes. + \hlon[*,]\hloff[foot,footback]% + \hldeston[*,]\hldestoff[foot,footback]% +}% +% +% Driver `nolinks'. +% +% Select this driver to suppress any hyperlinks / destinations in your +% document. +% +% NOTE: selecting this driver is quite different from not selecting +% any driver at all, or from selecting some driver and then turning +% off links and destinations for the entire document with \hloff and +% \hldestoff. +% +% The purpose of \hldestoff and \hloff is to mark (parts) of document +% where links should never appear. (Imagine you want to prevent a +% cross-referencing macro from generating a link at a certain spot in +% your document.) +% +% If instead you have prepared a document with links and just want to +% compile a version without the links, it is better to select the +% driver `nolinks'. This will ensure that spacing and pagebreaking +% will be the same as what you were getting with hyperlinks enabled. +% +% The reason for this is that hyperlinks are produced by \special +% commands. Each \special is placed inside a whatsit which may +% introduce a legitimate breakpoint at places where none would exist +% without the whatsit. The macros \hldestoff and \hloff disable +% hyperlink macros so drastically that no whatsits are produced. +% +% On the other hand, `nolinks' driver does not completely disable +% hyperlink macros. Instead, it defines them to write to the log +% file (what gets written is not really important). This will produce +% the whatsits imitating the whatsits from the \special's. (This +% trick was borrowed from graphics bundle.) +% +% Another reason for using `nolinks' is that in horizontal mode +% \hldest places destinations inside zero-width/height/depth boxes. +% When you say \hldestoff, \hldest will omit both destination specs +% and these boxes. The missing boxes can cause typesetting to be +% inconsistent with what you were getting with destinations enabled. +% Again, `nolinks' driver helps here by defining \hldest to still +% produce the empty boxes. +% +% Additionally, `nolinks' driver defines the \hldesttype, \hldestopts, +% \hltype, \hlopts macros to gobble their parameters, to avoid error +% messages about "unknown" options and types under the `nolinks' +% driver. +\def\hldriver@nolinks{% + \def\@hldest##1##2##3{% + \edef\temp{\write-1{hldest: ##3}}% + \ifvmode + \temp + \else + \allowhyphens + \expandafter\smash\expandafter{\temp}% + \allowhyphens + \fi + \ignorespaces + }% + \def\@hlstart##1##2##3{% + \leavevmode + \begingroup % Start the color group. + \edef\temp{\write-1{hlstart: ##3}}% + \temp + \ignorespaces + }% + \def\@hlend{% + \edef\temp{\write-1{hlend}}% + \temp + \endgroup % End the color group from \@hlstart. + }% + % Make \hltype, \hlopts, \hldesttype and \hldestopts ignore their + % parameters. + \let\hl@setparam\gobble +}% +% +% Driver `hypertex'. +% +{\catcode`\#=\other +\gdef\hlhash{#}}% +% +\def\hldriver@hypertex{% + % + % Hyperlink destinations. + % + % Default type. + \def\hldest@type{xyz}% + % Set defaults for the options (this also tells \hl@set@opt what + % options we support). (We do not define \hldest@opt@raise, + % \hl@opt@colormodel and \hl@opt@color, they are defined and used + % outside the drivers.) + \let\hldest@opt@cmd \empty + % Multiplexer for all supported destination types. + \def\hldest@driver{% + % Special case for `raw' destinations. + \ifx\@hltype\hl@raw@word + \csname \hldest@opt@cmd \endcsname + \else + \special{html:}\special{html:}% + \fi + }% + % Define handlers for each supported destination type (this also + % tells \hl@getparam what types we support). + \let\hldest@typeh@raw \empty + \let\hldest@typeh@xyz \empty + % + % Hyperlinks. + % + % Default type. + \def\hl@type{name}% + % We support `url' hyperlinks, so set some group types. + \ifx\hl@type@url\empty + \def\hl@type@url{url}% + \fi + \ifx\hl@type@hrefext\empty + \def\hl@type@hrefext{url}% + \fi + % Set defaults for the options (this also tells \hl@set@opt what + % options we support). + \let\hl@opt@cmd \empty + \let\hl@opt@ext \empty + \let\hl@opt@file \empty + % Multiplexer for all supported link types. + \def\hl@driver{% + % Special case for `raw' links. + \ifx\@hltype\hl@raw@word + \csname \hl@opt@cmd \endcsname + \else + % Construct common preamble of a link. + \def\hlstart@preamble{html:}}% + \def\hl@typeh@filename{% + \special{% + \hlstart@preamble + file:\hl@opt@file\hl@opt@ext + \ifempty\@hllabel \else \hlhash\@hllabel\fi + ">% + }% + }% + \def\hl@typeh@url{% + \special{% + \hlstart@preamble + \@hllabel + ">% + }% + }% + % + \def\@hlend{\special{html:}\endgroup}% End the group from \@hlstart. +}% +% +% Driver `pdftex'. +% +\def\hldriver@pdftex{% +\ifpdf % PDF output is enabled. + % + % Hyperlink destinations. + % + % Default type. + \def\hldest@type{xyz}% + % Set defaults for the options (this also tells \hl@set@opt what + % options we support). (We do not define \hldest@opt@raise, + % \hl@opt@colormodel and \hl@opt@color, they are defined and used + % outside the drivers.) + \let\hldest@opt@width \empty + \let\hldest@opt@height \empty + \let\hldest@opt@depth \empty + \let\hldest@opt@zoom \empty + \let\hldest@opt@cmd \empty + % Multiplexer for all supported destination types. + \def\hldest@driver{% + % Special case for `raw' destinations. + \ifx\@hltype\hl@raw@word + \csname \hldest@opt@cmd \endcsname + \else + \pdfdest name{\@hllabel}\@hltype + \csname hldest@typeh@\@hltype\endcsname + \fi + }% + % Define handlers for each supported destination type (this also + % tells \hl@getparam what types we support). + \let\hldest@typeh@raw \empty + \let\hldest@typeh@fit \empty + \let\hldest@typeh@fith \empty + \let\hldest@typeh@fitv \empty + \let\hldest@typeh@fitb \empty + \let\hldest@typeh@fitbh \empty + \let\hldest@typeh@fitbv \empty + \def\hldest@typeh@fitr{% + \ifx\hldest@opt@width \empty \else width \hldest@opt@width \fi + \ifx\hldest@opt@height \empty \else height \hldest@opt@height \fi + \ifx\hldest@opt@depth \empty \else depth \hldest@opt@depth \fi + }% + \def\hldest@typeh@xyz{% + \ifx\hldest@opt@zoom\empty \else zoom \hldest@opt@zoom \fi + }% + % + % Hyperlinks. + % + % Default type. + \def\hl@type{name}% + % We support `url' hyperlinks, so set some group types. + \ifx\hl@type@url\empty + \def\hl@type@url{url}% + \fi + \ifx\hl@type@hrefext\empty + \def\hl@type@hrefext{url}% + \fi + % Set defaults for the options (this also tells \hl@set@opt what + % options we support). + \let\hl@opt@width \empty + \let\hl@opt@height \empty + \let\hl@opt@depth \empty + \def\hl@opt@bstyle {S}% + \def\hl@opt@bwidth {1}% + \let\hl@opt@bcolor \empty + \let\hl@opt@hlight \empty + \let\hl@opt@bdash \empty + \let\hl@opt@pagefit \empty + \let\hl@opt@cmd \empty + \let\hl@opt@file \empty + \let\hl@opt@newwin \empty + % Multiplexer for all supported link types. + \def\hl@driver{% + % Special case for `raw' links. + \ifx\@hltype\hl@raw@word + \csname \hl@opt@cmd \endcsname + \else + % See if we will construct a /BS spec. We want to bother only + % if any of \hl@opt@bstyle, \hl@opt@bwidth and \hl@opt@bdash is + % not empty. + \let\hl@BSspec\relax % construct + \ifx\hl@opt@bstyle \empty + \ifx\hl@opt@bwidth \empty + \ifx\hl@opt@bdash \empty + \let\hl@BSspec\empty % don't construct + \fi + \fi + \fi + % Construct common preamble of a link. + \def\hlstart@preamble{% + \pdfstartlink + \ifx\hl@opt@width \empty \else width \hl@opt@width \fi + \ifx\hl@opt@height \empty \else height \hl@opt@height \fi + \ifx\hl@opt@depth \empty \else depth \hl@opt@depth \fi + attr{% + \ifx\hl@opt@bcolor\empty\else /C[\hl@opt@bcolor]\fi + \ifx\hl@opt@hlight\empty\else /H/\hl@opt@hlight\fi + \ifx\hl@BSspec\relax + /BS<<% + /Type/Border% + \ifx\hl@opt@bstyle\empty\else /S/\hl@opt@bstyle\fi + \ifx\hl@opt@bwidth\empty\else /W \hl@opt@bwidth\fi + \ifx\hl@opt@bdash\empty \else /D[\hl@opt@bdash]\fi + >>% + \fi + }% + }% + % Call the handler. + \csname hl@typeh@\@hltype\endcsname + \fi + }% + % Define handlers for each supported link type (this also tells + % \hl@getparam what types we support). + \let\hl@typeh@raw\empty + \def\hl@typeh@name{\hlstart@preamble goto name{\@hllabel}}% + \def\hl@typeh@num{\hlstart@preamble goto num \@hllabel}% + \def\hl@typeh@page{% + % PDF requires pages to start from 0, so adjust page number. + \count@=\@hllabel + \advance\count@ by-1 + % + \hlstart@preamble + user{% + /Subtype/Link% + /Dest% + [\the\count@ + \ifx\hl@opt@pagefit\empty/Fit\else\hl@opt@pagefit\fi]% + }% + }% + \def\hl@typeh@filename{\hl@file{(\@hllabel)}}% + \def\hl@typeh@filepage{% + % PDF requires pages to start from 0, so adjust page number. + \count@=\@hllabel + \advance\count@ by-1 + % + \hl@file{% + [\the\count@ \ifx\hl@opt@pagefit\empty/Fit\else\hl@opt@pagefit\fi]% + }% + }% + \def\hl@file##1{% + \hlstart@preamble + user{% + /Subtype/Link% + /A<<% + /Type/Action% + /S/GoToR% + /D##1% + /F(\hl@opt@file)% + \ifx\hl@opt@newwin\empty \else + /NewWindow \ifcase\hl@opt@newwin false\else true\fi + \fi + >>% + }% + }% + \def\hl@typeh@url{% + \hlstart@preamble + user{% + /Subtype/Link% + /A<<% + /Type/Action% + /S/URI% + /URI(\@hllabel)% + >>% + }% + }% + % + \def\@hlend{\pdfendlink\endgroup}% End the group from the \@hlstart. +% +\else % PDF output is not enabled. + \message{Eplain warning: `pdftex' hyperlink driver: PDF output is^^J + \space not enabled, falling back on `nolinks' driver.}% + \hldriver@nolinks +\fi +}% +% +% Driver `dvipdfm'. +% +\def\hldriver@dvipdfm{% + % + % Hyperlink destinations. + % + % Default type. + \def\hldest@type{xyz}% + % Set defaults for the options (this also tells \hl@set@opt what + % options we support). (We do not define \hldest@opt@raise, + % \hl@opt@colormodel and \hl@opt@color, they are defined and used + % outside the drivers.) + \let\hldest@opt@left \empty + \let\hldest@opt@top \empty + \let\hldest@opt@right \empty + \let\hldest@opt@bottom \empty + \let\hldest@opt@zoom \empty + \let\hldest@opt@cmd \empty + % Multiplexer for all supported destination types. + \def\hldest@driver{% + % Special case for `raw' destinations. + \ifx\@hltype\hl@raw@word + \csname \hldest@opt@cmd \endcsname + \else + % Construct common preamble of a destination. + \def\hldest@preamble{% + pdf: dest (\@hllabel) [@thispage + }% + % Call the handler. + \csname hldest@typeh@\@hltype\endcsname + \fi + }% + % Define handlers for each supported destination type (this also + % tells \hl@getparam what types we support). + \let\hldest@typeh@raw\empty + \def\hldest@typeh@fit{% + \special{\hldest@preamble /Fit]}% + }% + \def\hldest@typeh@fith{% + \special{\hldest@preamble /FitH + \ifx\hldest@opt@top\empty @ypos \else \hldest@opt@top \fi]}% + }% + \def\hldest@typeh@fitv{% + \special{\hldest@preamble /FitV + \ifx\hldest@opt@left\empty @xpos \else \hldest@opt@left \fi]}% + }% + \def\hldest@typeh@fitb{% + \special{\hldest@preamble /FitB]}% + }% + \def\hldest@typeh@fitbh{% + \special{\hldest@preamble /FitBH + \ifx\hldest@opt@top\empty @ypos \else \hldest@opt@top \fi]}% + }% + \def\hldest@typeh@fitbv{% + \special{\hldest@preamble /FitBV + \ifx\hldest@opt@left\empty @xpos \else \hldest@opt@left \fi]}% + }% + \def\hldest@typeh@fitr{% + \special{\hldest@preamble /FitR + \ifx\hldest@opt@left\empty @xpos\else\hldest@opt@left\fi\space + \ifx\hldest@opt@bottom\empty @ypos\else\hldest@opt@bottom\fi\space + \ifx\hldest@opt@right\empty @xpos\else\hldest@opt@right\fi\space + \ifx\hldest@opt@top\empty @ypos\else\hldest@opt@top \fi]}% + }% + \def\hldest@typeh@xyz{% + \begingroup + % Convert zoom factor: 12345 -> 12.345 + \ifx\hldest@opt@zoom\empty + \count1=\z@ \count2=\z@ + \else + \count2=\hldest@opt@zoom + \count1=\count2 \divide\count1 by 1000 + \count3=\count1 \multiply\count3 by 1000 + \advance\count2 by -\count3 + \fi + \special{\hldest@preamble /XYZ + \ifx\hldest@opt@left\empty @xpos\else\hldest@opt@left\fi\space + \ifx\hldest@opt@top\empty @ypos\else\hldest@opt@top\fi\space + \the\count1.\the\count2]}% + \endgroup + }% + % + % Hyperlinks. + % + % Default type. + \def\hl@type{name}% + % We support `url' hyperlinks, so set some group types. + \ifx\hl@type@url\empty + \def\hl@type@url{url}% + \fi + \ifx\hl@type@hrefext\empty + \def\hl@type@hrefext{url}% + \fi + % Set defaults for the options (this also tells \hl@set@opt what + % options we support). + \def\hl@opt@bstyle {S}% + \def\hl@opt@bwidth {1}% + \let\hl@opt@bcolor \empty + \let\hl@opt@hlight \empty + \let\hl@opt@bdash \empty + \let\hl@opt@pagefit \empty + \let\hl@opt@cmd \empty + \let\hl@opt@file \empty + \let\hl@opt@newwin \empty + % Multiplexer for all supported link types. + \def\hl@driver{% + % Special case for `raw' links. + \ifx\@hltype\hl@raw@word + \csname \hl@opt@cmd \endcsname + \else + % See if we will construct a /BS spec. We want to bother only + % if any of \hl@opt@bstyle, \hl@opt@bwidth and \hl@opt@bdash is + % not empty. + \let\hl@BSspec\relax % construct + \ifx\hl@opt@bstyle \empty + \ifx\hl@opt@bwidth \empty + \ifx\hl@opt@bdash \empty + \let\hl@BSspec\empty % don't construct + \fi + \fi + \fi + % Construct common preamble of a link. + \def\hlstart@preamble{% + pdf: beginann + <<% + /Type/Annot% + /Subtype/Link% + \ifx\hl@opt@bcolor\empty\else /C[\hl@opt@bcolor]\fi + \ifx\hl@opt@hlight\empty\else /H/\hl@opt@hlight\fi + \ifx\hl@BSspec\relax + /BS<<% + /Type/Border% + \ifx\hl@opt@bstyle\empty\else /S/\hl@opt@bstyle\fi + \ifx\hl@opt@bwidth\empty\else /W \hl@opt@bwidth\fi + \ifx\hl@opt@bdash\empty \else /D[\hl@opt@bdash]\fi + >>% + \fi + }% + % Call the handler. + \csname hl@typeh@\@hltype\endcsname + \fi + }% + % Define handlers for each supported link type (this also tells + % \hl@getparam what types we support). + \let\hl@typeh@raw\empty + \def\hl@typeh@name{\special{\hlstart@preamble /Dest(\@hllabel)>>}}% + \def\hl@typeh@page{% + % PDF requires pages to start from 0, so adjust page number. + \count@=\@hllabel + \advance\count@ by-1 + % + \special{% + \hlstart@preamble + /Dest[\the\count@ + \ifx\hl@opt@pagefit\empty/Fit\else\hl@opt@pagefit\fi]% + >>% + }% + }% + \def\hl@typeh@filename{\hl@file{(\@hllabel)}}% + \def\hl@typeh@filepage{% + % PDF requires pages to start from 0, so adjust page number. + \count@=\@hllabel + \advance\count@ by-1 + % + \hl@file{% + [\the\count@ \ifx\hl@opt@pagefit\empty/Fit\else\hl@opt@pagefit\fi]% + }% + }% + \def\hl@file##1{% + \special{% + \hlstart@preamble + /A<<% + /Type/Action% + /S/GoToR% + /D##1% + /F(\hl@opt@file)% + \ifx\hl@opt@newwin\empty \else + /NewWindow \ifcase\hl@opt@newwin false\else true\fi + \fi + >>% + >>% + }% + }% + \def\hl@typeh@url{% + \special{% + \hlstart@preamble + /A<<% + /Type/Action% + /S/URI% + /URI(\@hllabel)% + >>% + >>% + }% + }% + % + \def\@hlend{\special{pdf: endann}\endgroup}% End the group from \@hlstart. +}% +% +% Miscellaneous hyperlink macros. +% +% +% \href{URL}{TEXT} typesets TEXT as a link to the URL. If URL starts +% with a #, the rest of the URL is assumed to be this document's local +% anchor. Special chars (like # and ~) in URL don't need to be +% escaped in any way. +\def\href{% + % Read #1 (URL) inside a group with \uncatcodespecials, to get the # + % and ~ right. + \bgroup + \uncatcodespecials + \catcode`\{=1 \catcode`\}=2 + \@href +}% +% +\def\@href#1{% We'll read #2 (TEXT) later. + \egroup + \edef\@hreftmp{\ifempty{#1}{}\fi}% Parameter stuffing for \@@href. + \expandafter\@@href\@hreftmp#1\@@ +}% +% +\def\href@end@int{\hlend@impl{hrefint}}% +\def\href@end@ext{\hlend@impl{hrefext}}% +% Split out the first token and check if it is a #. +\def\@@href#1#2\@@{% + \def\@hreftmp{#1}% + \ifx\@hreftmp\hlhash + \let\href@end\href@end@int + \hlstart@impl{hrefint}{#2}% + \else + \let\href@end\href@end@ext + \hlstart@impl{hrefext}{#1#2}% + \fi + \@@@href +}% +% Now some tricks to avoid reading the TEXT as an argument (from the +% \footnote definition in plain TeX). +\def\@@@href{% + \futurelet\@hreftmp\href@ +}% +% +\def\href@{% + \ifcat\bgroup\noexpand\@hreftmp + \let\@hreftmp\href@@ + \else + \let\@hreftmp\href@@@ + \fi + \@hreftmp +}% +% +\def\href@@{\bgroup\aftergroup\href@end \let\@hreftmp}% +% +\def\href@@@#1{#1\href@end}% +% +% Make all user-visible \hl* macros to give errors until hyperlinks +% are explicitly enabled with \enablehyperlinks. +\def\hldeston{\errmessage{Please enable hyperlinks with + \string\enablehyperlinks\space before using hyperlink commands + (consider selecting the `nolinks' driver to ignore all hyperlink + commands in your document)}}% +\let\hldestoff\hldeston \let\hlon\hldeston \let\hloff\hldeston +\let\hlstart\hldeston \let\hlend\hldeston \let\hldest\hldeston +% This catches \hltype, \hlopts, \hldesttype, \hldestopts. +\let\hl@setparam\hldeston +% Turn off all groups to make sure \hlstart@impl, \hlend@impl and +% \hldest@impl do not call \hlstart, \hlend and \hldest until +% hyperlinks are enabled. +\@hloff[*]\@hldestoff[*]% +% +% +% Support for LaTeX packages under plain TeX. +% +% We use miniltx.tex from the LaTeX graphics collection and build on +% it to provide package options support, package version check, +% recursive package loading with \RequirePackage, proper handling of +% \AtBeginDocument and \AtEndOfPackage. +% +% Much of the following was borrowed from LaTeX. +% +% The internal variables are quite a mess, so here is a hint: +% +% - \usepkg@pkg, \usepkg@options, \usepkg@date are used by +% \usepackage to save its parameters. +% +% - When \RequirePackage is called within a package, the above +% variables are saved in \usepkg@save@VAR@RECURSIONLEVEL, where +% VAR={pkg,options,date}, and RECURSIONLEVEL is incremented for +% each nested package inclusion. This way the variables can be +% restored after the (nested) package will have been loaded. +% +% - Options for package PACKAGE (no .sty extension) are accumulated +% in \usepkg@options@PACKAGE. +% +% - For each declared option OPTION in package PACKAGE, we save the +% code which enables OPTION in \usepkg@option@PACKAGE@OPTION. +% There may be a star (`*') option declaration, the code from which +% will be used to process options not declared by the package +% (without it, an undeclared option will cause an error). +% +% - For each loaded PACKAGE / FILE.EXT we declare \ver@PACKAGE.sty / +% \ver@FILE.EXT. We use \ver@PACKAGE.sty to detect reloading +% of packages. Some packages also use these macros. +% +% - Calls to \AtBeginDocument accumulate the code in +% \usepkg@at@begin@document. We will expand it at the end of the +% \beginpackages...\endpackages `environment'. +% +% - Calls to \AtEndOfPackage accumulate the code in +% \usepkg@at@end@of@package. We will expand it after the package +% is loaded. To allow recursive package loading, \RequirePackage +% saves \usepkg@at@end@of@package analogous to \usepkg@pkg. +% +\newif\ifusepkg@miniltx@loaded +\newcount\usepkg@recursion@level +\def\usepkg@rcrs{\the\usepkg@recursion@level}% +\let\usepkg@at@begin@document\empty +\let\usepkg@at@end@of@package\empty +\def\usepkg@word@autopict{autopict}% +\def\usepkg@word@psfrag{psfrag}% +% +% \beginpackages...\endpackages +% +% All packages must be loaded within this `environment' (a kind of +% LaTeX's preamble). This is so to give us a chance to expand the +% accumulated \AtBeginDocument commands. Usually, you will want to +% restrict all \usepackage's to a single \beginpackages...\endpackages, +% just like in LaTeX, where you load all packages within a (single) +% preamble. +% +% At the end of the \beginpackages...\endpackages block, we restore +% the \input command to whatever it was defined before the +% package(s), because miniltx.tex and some packages make (sometimes +% incompatible) redefinitions of \input, and under plain TeX +% non-primitive \input is probably not what the user expects. But in +% case the redefined \input is actually needed, we save it as +% \packageinput. +% +% Define \DoNotLoadEpstopdf so that graphics.cfg does not try to load +% epstopdf.sty, which is a complication surely not wanted by default. +% +\long\def\beginpackages#1\endpackages{% + \let\usepackage\real@usepackage + \let\DoNotLoadEpstopdf=t + \let\eplaininput=\input + #1% + \usepkg@at@begin@document + \global\let\usepkg@at@begin@document\empty + \global\let\usepackage\fake@usepackage + \let\packageinput=\input + \let\input=\eplaininput + % should always be defined (from miniltx), but just in case: + \ifx\resetatcatcode\@undefined \else\resetatcatcode \fi +}% +% +% \fake@usepackage +% +% This is what \usepackage is defined to outside of +% \beginpackages...\endpackages `environment'. +\def\fake@usepackage{\errmessage{You should not use \string\usepackage\space outside of^^J + \@spaces\string\beginpackages...\string\endpackages\space environment}% +}% +% \RequirePackage[OPTIONS]{PACKAGES}[YYYY/MM/DD] +% +% Save parameters for the package being loaded and call \usepackage to +% load PACKAGES. We depend on \usepackage to restore the saved +% parameters. We allow for nested calls to \RequirePackage. +\def\eplain@RequirePackage{% + \global\ece\let{usepkg@save@pkg\usepkg@rcrs}\usepkg@pkg + \global\ece\let{usepkg@save@options\usepkg@rcrs}\usepkg@options + \global\ece\let{usepkg@save@date\usepkg@rcrs}\usepkg@date + \global\ece\let{usepkg@at@end@of@package\usepkg@rcrs}\usepkg@at@end@of@package + \global\advance\usepkg@recursion@level by\@ne + \real@usepackage +}% +% \usepackage[OPTIONS]{PACKAGES}[YYYY/MM/DD] +% +% Load each of the PACKAGES with OPTIONS, checking that the package +% date is at least YYYY/MM/DD; if it is not, issue a warning. +\let\usepackage\fake@usepackage +\def\real@usepackage{\@getoptionalarg\@finusepackage}% +\def\@finusepackage#1{% + \let\usepkg@options\@optionalarg + \ifempty{#1}% + \errmessage{No packages specified}% + \fi + % Load miniltx.tex, if it is not loaded. + \ifusepkg@miniltx@loaded \else + \testfileexistence[miniltx]{tex}% + \if@fileexists + \input miniltx.tex + \global\usepkg@miniltx@loadedtrue + % Redefine some macros from miniltx.tex + \global\let\RequirePackage\eplain@RequirePackage + \global\let\DeclareOption\eplain@DeclareOption + \global\let\PassOptionsToPackage\eplain@PassOptionsToPackage + \global\let\ExecuteOptions\eplain@ExecuteOptions + \gdef\ProcessOptions{\@ifstar\eplain@ProcessOptions + \eplain@ProcessOptions}% + \global\let\AtBeginDocument\eplain@AtBeginDocument + \global\let\AtEndOfPackage\eplain@AtEndOfPackage + \global\let\ProvidesFile\eplain@ProvidesFile + \global\let\ProvidesPackage\eplain@ProvidesPackage + \else + \errmessage{miniltx.tex not found, cannot load LaTeX packages}% + \fi + \fi + % Read the trailing optional arg (YYYY/MM/DD). + \@ifnextchar[%] + {\@finfinusepackage{#1}}% + {\@finfinusepackage{#1}[]}% +}% +% +\def\@finfinusepackage#1[#2]{% + \edef\usepkg@date{#2}% + % Load each package from the list. Do it outside the \for loop to + % avoid clashes with any \for loops executed by the package. + \let\usepkg@load@list\empty + \for\usepkg@pkg:=#1\do{% + \toks@=\expandafter{\usepkg@load@list}% + \edef\usepkg@load@list{% + \the\toks@ + \noexpand\usepkg@load@pkg{\usepkg@pkg}% + }% + }% + \usepkg@load@list + % Restore parameters in case we were called from \RequirePackage. + \ifnum\usepkg@recursion@level>0 + \global\advance\usepkg@recursion@level by\m@ne + \expandafter\let\expandafter\usepkg@pkg\csname usepkg@save@pkg\usepkg@rcrs\endcsname + \expandafter\let\expandafter\usepkg@options\csname usepkg@save@options\usepkg@rcrs\endcsname + \expandafter\let\expandafter\usepkg@date\csname usepkg@save@date\usepkg@rcrs\endcsname + \expandafter\let\expandafter\usepkg@at@end@of@package\csname usepkg@at@end@of@package\usepkg@rcrs\endcsname + % Free the memory. + \global\ece\let{usepkg@save@pkg\usepkg@rcrs}\undefined + \global\ece\let{usepkg@save@options\usepkg@rcrs}\undefined + \global\ece\let{usepkg@save@date\usepkg@rcrs}\undefined + \global\ece\let{usepkg@at@end@of@package\usepkg@rcrs}\undefined + \fi +}% +% Load one package. We assume packages have `sty' extension. +\def\usepkg@load@pkg#1{% + % Special cases for `autopict' and `psfrag' packages: + % - `psfrag' is loaded by psfrag.tex. + % - `autopict' is loaded by picture.tex, but the package file is + % autopict.sty. + \def\usepkg@pkg{#1}% + \ifx\usepkg@pkg\usepkg@word@autopict + \testfileexistence[picture]{tex}% + \if@fileexists \else + \errmessage{Loader `picture.tex' for package `\usepkg@pkg' not found}% + \fi + \else + \ifx\usepkg@pkg\usepkg@word@psfrag + \testfileexistence[psfrag]{tex}% + \if@fileexists \else + \errmessage{Loader `psfrag.tex' for package `\usepkg@pkg' not found}% + \fi + \fi + \fi + % See if the package was loaded. If it was, we just bail out. + % (Maybe we should skip reloading it/warn? We don't want to go into + % checking that the package was first loaded with a superset of + % options which are requested now.) \ProvidePackage and + % \ProvideFile define the macro \ver@PACKAGE.sty (see + % \eplain@pr@videpackage below). + \ifundefined{ver@\usepkg@pkg.sty}% + \expandafter\@finusepkg@load@pkg + \else + \immediate\write-1{^^J\linenumber Eplain: package `\usepkg@pkg' already + loaded, skipping reloading}% + \fi +}% +\def\@finusepkg@load@pkg{% + \testfileexistence[\usepkg@pkg]{sty}% + \if@fileexists \else + \errmessage{Package `\usepkg@pkg' not found}% + \fi + % Construct option list for the package. Include any options + % passed to us by \PassOptionsToPackage and \RequirePackage. + \expandafter\let\expandafter\temp\csname usepkg@options@\usepkg@pkg\endcsname + \ifx\temp\relax + \let\temp\empty + \fi + \ifx\temp\empty + \let\temp\usepkg@options + \else + \ifx\usepkg@options\empty \else + \edef\temp{\temp,\usepkg@options}% + \fi + \fi + \global\ece\let{usepkg@options@\usepkg@pkg}\temp + % For the duration of the package, we want any calls to \usepackage + % to be mapped to \RequirePackage, to allow nested package loads + % without clobbering up anything. (Maybe packages never use + % \usepackage instead of \RequirePackage, but this won't hurt.) + \let\usepackage\eplain@RequirePackage + % Clear \AtEndOfPackage commands (can be non-empty during recursive + % package loading). + \global\let\usepkg@at@end@of@package\empty + % Load the package. If the package asks to load other package, + % \RequirePackage will save our \usepkg@{pkg,options,date} and + % \AtEndOfPackage commands, and \usepackage will restore them after + % recursively loading that package, so we don't worry about our + % setup being clobbered. + \ifx\usepkg@pkg\usepkg@word@autopict + \input picture.tex + \else + \ifx\usepkg@pkg\usepkg@word@psfrag + \input \usepkg@pkg.tex + \else + \input \usepkg@pkg.sty + \fi + \fi + % Execute the accumulated \AtEndOfPackage commands, and reset them + % to free the memory. + \usepkg@at@end@of@package + \global\let\usepkg@at@end@of@package\empty + % Restore the `real' \usepackage definition. + \let\usepackage\real@usepackage + % Clear the option list for the loaded package (we won't load a + % second copy anyway). + \global\ece\let{usepkg@options@\usepkg@pkg}\undefined + % Set \Url@HyperHook for url.sty + \def\Url@HyperHook##1{\hlstart@impl{url}{\Url@String}##1\hlend@impl{url}}% + % We check package version in \ProvidePackage, before reading the + % rest of the package, so that in case of errors (which can be + % numerous) the warning hopefully comes before the errors. +% \@ifl@ter{sty}\usepkg@pkg\usepkg@date{}% +% {\message{Warning: you have requested package `\usepkg@pkg', version \usepkg@date,^^J +% \@spaces but only version `\csname ver@\usepkg@pkg.sty\endcsname' is available.}}% +}% +% \DeclareOption{OPTION}{CODE} +% +% Save CODE in `usepkg@option@PACKAGE@OPTION'. Starred version is not +% treated any different here, but when defined it will be used by +% \ProcessOptions and \ExecuteOptions to process undeclared options. +\def\eplain@DeclareOption#1#2{% + \toks@{#2}% + \expandafter\xdef\csname usepkg@option@\usepkg@pkg @#1\endcsname{\the\toks@}% +}% +% \PassOptionsToPackage{OPTIONS}{PACKAGES} +% +% Add OPTIONS to the option list for each of the PACKAGES. +\def\eplain@PassOptionsToPackage#1#2{% + \ifempty{#1}\else + \for\usepkg@temp:=#2\do{% + \expandafter\let\expandafter\temp\csname usepkg@options@\usepkg@temp\endcsname + \ifx\temp\relax + \let\temp\empty + \fi + \ifx\temp\empty + \edef\temp{#1}% + \else + \edef\temp{\temp,#1}% + \fi + \global\ece\let{usepkg@options@\usepkg@temp}\temp + }% + \fi +}% +% \ExecuteOptions{OPTIONS} +% \ProcessOptions +% +% \ExecuteOptions executes each option from OPTIONS, \ProcessOptions +% executes each option from the option list for the current package. +% If the star (`*') option is declared, it will be used to process +% undeclared options; otherwise, undeclared option will cause an +% error. +\def\usepkg@exec@options#1{% + % The iterator \CurrentOption below was used purposely. Some + % packages use it in the argument to \DeclareOption. + \for\CurrentOption:=#1\do{% + \expandafter\let\expandafter\usepkg@temp + \csname usepkg@option@\usepkg@pkg @\CurrentOption\endcsname +% + \ifx\usepkg@temp\relax + % Option is not declared. If a `default' option handler is + % declared, use it. + \expandafter\let\expandafter\temp\csname usepkg@option@\usepkg@pkg @*\endcsname + \ifx\temp\relax + \errmessage{Unknown option `\CurrentOption' to package `\usepkg@pkg'}% + \else + \temp + \fi + \else + % Option is declared. + \usepkg@temp + \fi + }% +}% +% +\let\eplain@ExecuteOptions\usepkg@exec@options +\def\eplain@ProcessOptions{% + \expandafter\usepkg@exec@options\csname usepkg@options@\usepkg@pkg\endcsname +}% +% \AtBeginDocument{CODE} +% \AtEndOfPackage{CODE} +% +% miniltx.tex defines \AtBeginDocument to execute its parameter right +% away, but some packages depend on \AtBeginDocument to be executed +% after packages are processed. So we redefine \AtBeginDocument to +% accumulate its argument, to be executed by us at the end of +% \beginpackages...\endpackages. \AtEndOfPackage is not defined by +% miniltx.tex at all; we define it similar to \AtBeginDocument. +% +\def\usepkg@accumulate@cmds#1#2{% + \toks@=\expandafter{#1}% + \toks@ii={#2}% + \xdef#1{\the\toks@\the\toks@ii}% +}% +\def\eplain@AtBeginDocument{\usepkg@accumulate@cmds\usepkg@at@begin@document}% +\def\eplain@AtEndOfPackage{\usepkg@accumulate@cmds\usepkg@at@end@of@package}% +% +% \ProvidesFile{FILENAME.EXT}[VERSION] +% \ProvidesPackage{PACKAGENAME}[VERSION] +% +% miniltx.tex defines \ProvidesFile and \ProvidesPackage to only log a +% message. We want to define \ver@PACKAGE.sty / \ver@FILENAME.EXT, as +% we depend on these to know when a package/file has been loaded, and +% some packages depend on them, too. +\def\eplain@ProvidesPackage#1{% + \@ifnextchar[%] + {\eplain@pr@videpackage{#1.sty}}{\eplain@pr@videpackage#1[]}% +}% +\def\eplain@pr@videpackage#1[#2]{% + \wlog{#1: #2}% + % This will flag the package as loaded. + \expandafter\xdef\csname ver@#1\endcsname{#2}% +% \expandafter\edef\expandafter\temp{\csname usepkg@options@\usepkg@pkg\endcsname}% +% \message{^^JPackage:\usepkg@pkg^^JOptions:\usepkg@options^^J+ passed options:\temp^^J}% + % Check package version. + \@ifl@t@r{#2}\usepkg@date{}% + {\message{Warning: you have requested package `\usepkg@pkg', version \usepkg@date,^^J + \@spaces but only version `\csname ver@#1\endcsname' is available.}}% +}% +% +\def\eplain@ProvidesFile#1{% + \@ifnextchar[%] + {\eplain@pr@videfile{#1}}{\eplain@pr@videfile#1[]}% +}% +\def\eplain@pr@videfile#1[#2]{% + \wlog{#1: #2}% + % This will flag the file as loaded. + \expandafter\xdef\csname ver@#1\endcsname{#2}% + % We don't check file version. graphics calls \ProvideFile to + % \includegraphics, and it does not give any date at the beginning + % of #2, so checking the date will cause an error. +}% +% Check package version. From LaTeX. +\def\@ifl@ter#1#2{% + \expandafter\@ifl@t@r + \csname ver@#2.#1\endcsname +}% +\def\@ifl@t@r#1#2{% + \ifnum\expandafter\@parse@version#1//00\@nil<% + \expandafter\@parse@version#2//00\@nil + \expandafter\@secondoftwo + \else + \expandafter\@firstoftwo + \fi +}% +\def\@parse@version#1/#2/#3#4#5\@nil{#1#2#3#4 }% +% For the `draft' option to graphic{s,x}.sty. +\let\ttfamily\tt +\def\strip@prefix#1>{}% +% Definitions for epstopdf.sty. +\def\@ifpackageloaded#1{% + \expandafter\ifx\csname ver@#1.sty\endcsname\relax + \expandafter\@secondoftwo + \else + \expandafter\@firstoftwo + \fi +}% +\long\def\g@addto@macro#1#2{% + \begingroup + \toks@\expandafter{#1#2}% + \xdef#1{\the\toks@}% + \endgroup +}% +% These are for the warnings from epstopdf.sty when graphics.sty is +% not loaded. From pdftex.def. +\def\PackageWarning#1#2{% + \begingroup + \newlinechar=10 % + \def\MessageBreak{% + ^^J(#1)\@spaces\@spaces\@spaces\@spaces + }% + \immediate\write16{^^JPackage #1 Warning: #2\on@line.^^J}% + \endgroup +}% +\def\PackageWarningNoLine#1#2{% + \PackageWarning{#1}{#2\@gobble}% +}% +\def\on@line{ on input line \the\inputlineno}% +% Needed by some packages. +\def\@spaces{\space\space\space\space}% +\def\@inmatherr#1{% + \relax + \ifmmode + \errmessage{The command is invalid in math mode}% + \fi +}% +\let\protected@edef\edef +% +% +% +\let\wlog = \@plainwlog +\catcode`@ = \@eplainoldatcode +% +\def\fmtname{eplain}% +\def\eplain{t}% +{\edef\plainversion{\fmtversion}% + \xdef\fmtversion{REPLACE-WITH-VERSION: REPLACE-WITH-DAY-MONTH-YEAR (and plain \plainversion)}% +}% +% +% +% +% +% Local variables: +% page-delimiter: "^% \f" +% End: -- cgit v1.2.3