From e0c6872cf40896c7be36b11dcc744620f10adf1d Mon Sep 17 00:00:00 2001 From: Norbert Preining Date: Mon, 2 Sep 2019 13:46:59 +0900 Subject: Initial commit --- language/cyrtug/readme.eng | 2372 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 2372 insertions(+) create mode 100644 language/cyrtug/readme.eng (limited to 'language/cyrtug/readme.eng') diff --git a/language/cyrtug/readme.eng b/language/cyrtug/readme.eng new file mode 100644 index 0000000000..6e11f51e06 --- /dev/null +++ b/language/cyrtug/readme.eng @@ -0,0 +1,2372 @@ +============================================================================== +README.ENG (emTeX DISTRIBUTION) VERSION: 25-Sep-1990 +============================================================================== + With modifications of 23-Jun-1992 + + + emTeX: TeX for OS/2, PC-DOS and MS-DOS + + +------------------------------------------------------------------------------ +Preliminary remarks on the documentation +------------------------------------------------------------------------------ + +In order to use TeX or LaTeX, familiarity with the `programming +language' TeX or LaTeX, respectively, is required. Thus in general +the reading of [1], [2], [5] or [8] is unavoidable. As a brief +introduction for beginners the LaTeX brief introduction of H. Partl +(in German) may be used; it can be found on the disk after the +installation of emTeX (details below). It cannot be used as a +substitute for [2] or [5], however. Experience shows that trying to +save time by not reading the documentation fails. This is especially +true with TeX. + + +------------------------------------------------------------------------------ +Book list +------------------------------------------------------------------------------ + +`Original works': + +[1] Donald E. Knuth: The TeXbook + + The standard work on TeX and plain TeX (in English). + +[2] Leslie Lamport: LaTeX: A Document Preparation System + + The standard work for LaTeX (in English). + Supplemented by \emtex\texinput\local.tex and/or \emtex\doc\local.dvi. + +[3] Donald E. Knuth: The METAFONTbook + + The standard work for METAFONT (in English). + +[4] Michael J. Wichura: The PiCTeX Manual + + Manual for PiCTeX (in English). + Obtainable (cost: US$30) from the TeX User's Group: + + TeX Users Group + P. O. Box 9506 + Providence, RI 02940 + USA + + Phone: 401-751-7760 + E-mail: tug@math.ams.com + + +Further Books: + +[5] Helmut Kopka: LaTeX Eine Einfuehrung + + A manual for LaTeX in German. An English version is planned. + +[6] Helmut Kopka: LaTeX Erweiterungsmoeglichkeiten + +[7] Norbert Schwarz: Eine Einfuehrung in TeX +[8] Norbert Schwarz: Introduction to TeX + + + +------------------------------------------------------------------------------ +Introduction +------------------------------------------------------------------------------ + +emTeX consists among others in the following: + + TeX The well-known text system by Donald E. Knuth + LaTeX The well-known macro package for TeX by L. Lamport + METAFONT `font compiler' by Donald E. Knuth + dvidrv Printer driver and Screen Previewer + TeXcad A program for drawing LaTeX picture environments + +All programs but TeXcad can be used under DOS as well as OS/2. TeXcad can +be used only under DOS or in DOS mode of OS/2. + +The dvidrv printer drivers support the following printers: + + HP LaserJet+, HP LaserJet II, HP LaserJet III + HP DeskJet, HP DeskJet+ + Kyocera F-1010 + NEC P6, P7, P2200 + EPSON LQ, FX, and RX series + Panasonic KX-P1124 + Apple Imagewriter + C.ITOH 8510A + Tandy DMP-130 + ...and many more dot matrix printers + + +emTeX consists of several packages. Each single package is provided in the +form of zip files, which have to be unpacked with the program pkunzip, which +is also provided. Many packages are spread over several zip files, so that +DSDD diskettes can be used. (But fonts are available only on HD diskettes.) +The package DVIDRV, for example, is found in the files dvidrv1.zip, +dvidrv2.zip, and dvidrv3.zip. On the other hand, the package PICTEX is found +in the single file pictex.zip. + + +------------------------------------------------------------------------------ +Diskettes +------------------------------------------------------------------------------ + +On delivery on HD diskettes (1200 KB or 1440 KB), the diskettes contain the +following files: + + +Diskette 1 +---------- + + pkz102.exe Compression program (self-unpacking program). + pkunzip.exe Unpacking program (from pkz102.exe). + delete.exe File deleting program. + remove.exe Package removing program. + readme.eng This file. + readme.ger German version of this file. + help.eng Frequently asked questions with answers (English). + help.ger Frequently asked questions with answers (German). + changes.eng Changes from older versions (English). + changes.ger Changes from older versions (German). + changes.pre Changes between the pre-releases of emTeX (German). + tex1.zip TEX package, Part 1/2. + tex2.zip TEX package, Part 2/2. + +Diskette 2 +---------- + + latex1.zip LATEX package, Part 1/2. + latex2.zip LATEX package, Part 2/2. + latexdoc.zip LATEXDOC package. + texware.zip TEXWARE package. + makeindx.zip MAKEINDX package. + pictex.zip PICTEX package. + blatex.zip BLATEX package. + +Diskette 3 +---------- + + dvidrv1.zip DVIDRV package, Part 1/3. + dvidrv2.zip DVIDRV package, Part 2/3. + dvidrv3.zip DVIDRV package, Part 3/3. + texcad.zip TEXCAD package. + bmf1.zip BMF package, Part 1/2. + +Diskette 4 +---------- + + mf1.zip MF package, Part 1/3. + mf2.zip MF package, Part 2/3. + mf3.zip MF package, Part 3/3. + mfware1.zip MFWARE package, Part 1/2. + +Diskette 5 +---------- + + mfware2.zip MFWARE package, Part 2/2. + pkedit.zip PKEDIT package. + misc_mf.zip MISC_MF package. + emsy.zip EMSY package. + btex1.zip BTEX package, Part 1/2. + btex2.zip BTEX package, Part 2/2. + bmf2.zip BMF, Part 2/2. + bibtex.zip BIBTEX package. + +Diskette 6 +---------- + + lkurz.zip LKURZ package. + gtex.zip GTEX package. + glatex.zip GLATEX package. + gbtex.zip GBTEX package. + gblatex.zip GBLATEX package. + web.zip WEB package. + dvidrvma.zip DVIDRVMA package. + + +Further diskettes (the files fit on HD diskettes only) +------------------------------------------------------ + +If you don't have these diskettes, you should use MFjob to create the fonts. + +Font library files (*.fli): + + Name | Resolution| Diskettes | Printers + | (DPI) | / Files | (among others) + -----+-----------+-----------+------------------------------------------- + LJ | 300 | 5 / 8 | HP LaserJet+, DeskJet, Kyocera F-1010 + P6L | 180 | 3 / 7 | NEC P6, EPSON LQ series, Panasonic KX P1124 + P6M | 360x180 | 4 / 7 | NEC P6, EPSON LQ series, Panasonic KX P1124 + P6H | 360 | 6 / 8 | NEC P6, Panasonic KX P1124, EPSON LQ-550 + FX | 240x216 | 4 / 7 | EPSON FX-80, Tandy DMP-130 + ITO | 160x144 | 3 / 7 | C.ITOH 8510A, Apple Imagewriter + + +------------------------------------------------------------------------------ +Packages +------------------------------------------------------------------------------ + +The size indications for the packages are given in KBytes (1024 bytes). +If the cluster size of the disk is greater than 1 KByte, which is almost +always the case, somewhat more space will be needed. + + +BIBTEX + contains: BibTeX (Bibliography database for LaTeX) + requires: LATEX + optional: --- + files: 11 + size: 323 + +BLATEX + contains: LaTeX for bigTeX (extra big LaTeX) + requires: TEX, BTEX, LATEX + optional: --- + files: 7 + size: 499 + +BMF + contains: bigMETAFONT (extra big METAFONT) + requires: MF + optional: --- + files: 11 + size: 1043 + + +BTEX + contains: bigTeX (extra big TeX) + requires: TEX + optional: BLATEX + files: 9 + size: 986 + +DVIDRV + contains: Printer drivers and previewers (dvidrv) + requires: --- + optional: TEX + files: 106 + size: 1491 + + +DVIDRVMA + contains: Manual for the dvidrv drivers + requires: DVIDRV, (EMSY) + optional: --- + files: 29 + size: 511 + + +EMSY *) + contains: Special fonts of/for em + requires: MF, TEX + optional: LATEX + files: 19 + size: 25 + +GBLATEX + contains: LaTeX for bigTeX (German hyphenation patterns) + requires: TEX, BTEX, GTEX, LATEX, BLATEX, GLATEX + optional: --- + files: 7 + size: 499 + +GBTEX + contains: bigTeX (German hyphenation patterns) + requires: TEX, BTEX, GTEX + optional: GBLATEX + files: 5 + size: 316 + +GLATEX + contains: LaTeX (German hyphenation) and brief LaTeX intro. + requires: LATEX, GTEX + optional: --- + files: 8 + size: 415 + +GTEX + contains: Files for typesetting German texts + requires: TEX + optional: GLATEX + files: 12 + size: 312 + +LATEX + contains: LaTeX (to be more exact: ILaTeX) + requires: TEX + optional: DVIDRV + files: 78 + size: 1141 + +LATEXDOC *) + contains: doc files (documented sty files; obsolete) + requires: LATEX + optional: --- + files: 26 + size: 329 + +LKURZ *) + + contains: Source text for the brief LaTeX intro (German) + requires: LATEX + optional: --- + files: 7 + size: 94 + +MAKEINDX + + contains: MakeIndex (to sort LaTeX index) + requires: LATEX + optional: --- + files: 5 + size: 156 + +MF + contains: METAFONT + requires: MFWARE + optional: --- + files: 191 + size: 1868 + +MFWARE + contains: Auxiliary programs for METAFONT + requires: MF + optional: TEX, PKEDIT + files: 44 + size: 759 + +MISC_MF *) + contains: Various font source texts + requires: METAFONT + optional: --- + files: 5 + size: 134 + +PICTEX + contains: PiCTeX (graphic macros for TeX) + requires: TEX + optional: BLATEX (required for LaTeX) + files: 5 + size: 147 + +PKEDIT + contains: Font editor + requires: --- + optional: MFWARE + files: 4 + size: 100 + +TEX + contains: emTeX (plain TeX) + requires: --- + optional: DVIDRV + files: 104 + size: 1110 + +TEXCAD + contains: TeXcad (drawing program for LaTeX picture environment) + requires: --- + optional: --- + files: 18 + size: 244 + +TEXWARE + contains: Auxiliary programs for TeX + requires: TEX + optional: --- + files: 11 + size: 439 + +WEB *) + contains: The WEB programming system (TANGLE, WEAVE, ...) + requires: TEX + optional: --- + files: 7 + size: 255 + + +The packages with *) are usually not installed. + + +------------------------------------------------------------------------------ +Directions for pkunzip +------------------------------------------------------------------------------ + +The program pkunzip is part of a program package from PKWARE. It is +installed as follows on a disk (for example in the directory c:\pk): + + md c:\pk + a:pkz102 c:\pk + +These lines mean the following: + + md c:\pk Make the directory + a:pkz102 Load the self-unpacking program on drive a: + c:\pk Target directory + +Please observe the license conditions at the end of manual.doc +(contained in pkz102.exe)! + +The contents of a zip file (here dvidrvma.zip) can be displayed as follows: + + pkunzip -vb a:dvidrvma + +These lines have the following meaning: + + pkunzip Call the unpacking program + -vb List the contents of a zip file (brief listing) + a:dvidrvma zip file + + +------------------------------------------------------------------------------ +Installation +------------------------------------------------------------------------------ + +First read this file (readme.eng) in its entirety. Then you should read the +license conditions at the end of manual.doc (contained in pkz102.exe) for +pkzip/pkunzip. (And follow the conditions.) + +For the installation, the program pkunzip.exe should be copied onto the disk. +A directory should be used that is in the path for executables (PATH). For +OS/2 users: There is also an OS/2 version of pkzip/pkunzip, but this is not +supplied with emTeX. If you do not have this, you have to use pkunzip in +the DOS compatibility environment. + +All of the following examples assume that emTeX is to be installed on drive c: +(You can however install emTeX on another disk, if there is enough space.) +In case an older version of emTeX is already installed on the disk, this +should first be removed. First the files you have modified should be saved +(usually only batch and configuration files). Moreover, before removing emTeX +from the disk, the diskettes should be checked for readability, for example +with + + pkunzip -t a:* + +These lines have the following meaning: + + pkunzip Call the unpacking program + -t Check the zip files + a:* All the zip files on drive a: + +The removal of emTeX is done with the program delete, which is supplied on the +first diskette. This is done as follows (drive c:): + + a:delete -sd c:\emtex\*.* + +These lines have the following meaning: + + a: Load the program from diskette (first diskette!) + delete Call the file deletion program + -s Also delete in subdirectories + -d Remove directories + c:\emtex\*.* Files to be removed + +Since by this procedure all files in the directory \emtex and in all +subdirectories of this directory will be deleted, you should not use this +directory for your own files! + +Now the individual packages can be installed. The following packages are +usually installed (the packages in parentheses do not have to be installed): + + TeX: TEX, DVIDRV, (PICTEX), (TEXWARE) + LaTeX: TEX, DVIDRV, LATEX, (BIBTEX), (TEXWARE), (MAKEINDX) + METAFONT: MF, MFWARE, (PKEDIT), (TEX) + +For example, to install the package LATEX from drive a: onto disk c:, the +following should be entered: + + pkunzip -d -o a:latex? c:\ + +This line means the following: + + pkunzip Call the unpacking program + -d Use directories stored in zip file + -o Overwrite existing files + a:latex? Unpack the package LATEX (latex1.zip, ...) + c:\ Target path + +In this way the files will automatically be copied into the right +directories. After installation you should read (or print and read) the +following files: + +\emtex\doc\english\texware.doc (TEX package, English) +\emtex\doc\german\texware.doc (TEX package, German) +\emtex\doc\english\dvidrv.doc (DVIDRV package, English) +\emtex\doc\german\dvidrv.doc (DVIDRV package; do not print out; see below!) + +Moreover, the license conditions in the following files should be observed: + +\emtex\doc\makeindx.cpy (MAKEINDX package) +\emtex\texinput\ghyphen.min (GTEX package) +\emtex\texinput\ghyphen.max (GTEX package) + +If you have installed the package DVIDRV and have followed the directions in +the part `Installation of the printer driver and screen previewer' of this +file, then you should install the package DVIDRVMA. This enables you to print +out the `real' manual for the package DVIDRV (as opposed to dvidrv.doc), if +you have available a suitable printer. After printing the manual you can +again delete the files taken from DVIDRVMA (see below). If you cannot, or do +not want to, print the dvidrv manual, then you have to content yourself with +the indications in dvidrv.doc. + +After the installation of DVIDRV you can print out the other instructions (or +look at them on the screen). Reading + + \emtex\doc\english\emtex.dvi (TEX package) + \emtex\doc\local.dvi (LATEX package) + +is especially recommended. + +In order to use TeX or METAFONT, various environment variables still have to +be set; see the section `Environment Variables' further below in this file. + +If you want to use LaTeX together with PiCTeX, then bigTeX has to be used. +This is a bigger (but slower) version of emTeX. At present only a preliminary +version is available. + +A brief introduction to LaTeX, in German, is found in the package GLATEX. +Among the files delivered is the macro package german.sty of H. Partl; if you +want to typeset German or other non-English texts with TeX or LaTeX, you +should read the corresponding instruction \emtex\doc\germdoc.dvi. + +Since there are some files which you will not need, you should write a +batch file to delete the ones not needed. In this way you can save some +work in the next installation of emTeX. For example, if you work under +DOS, you will not need the OS/2 versions of TeX and METAFONT. It is also +possible to extract single files from a zip file; see manual.doc in +pkz102.exe. Example: + + pkunzip -d a:pkedit c:\ emtex\pkedit.exe + +This line means the following: + + pkunzip Call the unpacking program + -d Use directories stored in zip file + a:pkedit Unpack the package PKEDIT + c:\ Target path + emtex\pkedit.exe File name (without leading backslash!) + + +You'll find some frequently asked questions with answers in the file +help.eng (and help.ger) on the first diskette. Before asking the author, +you should read help.eng. + + +------------------------------------------------------------------------------ +Removing a package +------------------------------------------------------------------------------ + +You can remove a package from the hard disk if the appropriate REM file is +supplied - these files will appear in emTeX sets made available after 2nd +May 1990. To remove a package the program `remove', on the first disk, is +needed. If, for example, you want to remove the DVIDRVMA package from the C: +drive you would enter the following commands: + + a:remove c:\emtex\remove\dvidrvma.rem c:\ + +where + + a: load the program from the first disk + remove run the package removal program + c:\emtex\remove\dvidrvma.rem + the list of files comprising the package + c:\ remove the package from this disk + + + +------------------------------------------------------------------------------ +Directories +------------------------------------------------------------------------------ + +The following directories are created during the installation (see also +emtex.dvi, local.dvi, texware.doc, and mfware.doc): + +\emtex + + Programs, batch files, and configuration files. + +\emtex\doc + + Instructions and Manuals. The texts in this directory are + available in only one language (English or German). + +\emtex\doc\english + + English Instructions and Manuals. + +\emtex\doc\german + + German Instructions and Manuals. + +\emtex\doc\gr180 + + Graphic files for the dvidrv manual (180 DPI). + +\emtex\doc\gr300 + + Graphic files for the dvidrv manual (300 DPI). + +\emtex\doc\gr360 + + Graphic files for the dvidrv manual (360 DPI). + +\emtex\texfmts + + TeX format files (macro packages in a fast-loading format; for + example, plain and LaTeX) and tex.poo. + +\emtex\btexfmts + + bigTeX format files (macro packages in a fast-loading format; for + example, plain and LaTeX) and tex.poo. + +\emtex\tfm + + tfm files (TeX font metrics; font descriptions). + +\emtex\texinput + + Texts which will be read by TeX (and BibTeX). + +\emtex\bibinput + + Bibliography database for BibTeX. + +\emtex\mfinput + + Texts which will be read by METAFONT (and MFT). + +\emtex\mfbases + + METAFONT base files (macro packages in a fast-loading format; for + example plain and cm) and mf.poo. + +\emtex\bmfbases + + bigMETAFONT base files (macro packages in a fast-loading format; + for example plain and cm) and mf.poo. + +\emtex\mfjob + + mfj files (see MFjob). + +\emtex\remove + + Package contents listings used by the remove program. + + +------------------------------------------------------------------------------ +Environment variables and config.sys +------------------------------------------------------------------------------ + +In this section it is assumed that TeX has been installed on drive C:. + +You should set the environment variables for TeX as follows: + + set texinput=c:\emtex\texinput + set tfm=c:\emtex\tfm + set texfmt=c:\emtex\texfmts + set btexfmt=c:\emtex\btexfmts (only for bigTeX) + set textfm=c:\emtex\tfm + set bibinput=c:\emtex\bibinput + +The environment variables for METAFONT and MFjob are set as follows: + + set mfinput=c:\emtex\mfinput + set mfbas=c:\emtex\mfbases + set bmfbas=c:\emtex\bmfbases (only for bigMETAFONT) + set mfjob=c:\emtex\mfjob + +In addition, the directory c:\emtex should be put in the search path, for +example: + + path c:\bin;c:\emtex + +All of these lines should be put in the file autoexec.bat (file config.sys +for OS/2). The file \emtex\set-tex.bat (\emtex\set-tex.cmd in OS/2) can be +used as a model, or modified and called by autoexec.bat. If the computer +complains about not enough environment space, you should consult your DOS +manual concerning the SHELL command in the config.sys file and concerning +the /E and /P options of the program COMMAND.COM. + +If you put all emTeX directories on ONE drive and if the directories are +organzied as recommended (and as stored in the zip files), it will be +sufficient to set the environment variable EMTEXDRV (besides PATH): + set emtexdrv=c +This causes all programs (but dvidrv) to use the default directories on +drive C:. + +The config.sys file should specify at least + + FILES=20 + BUFFERS=20 + +greater values are allowed. + +Under OS/2, the line + + IOPL=YES + +is required in config.sys for dviscr and pkedit. + + +------------------------------------------------------------------------------ +Installation of the printer drivers and the screen previewers +------------------------------------------------------------------------------ + +1. Install the DVIDRV package. + +2. Copy the fonts to the disk. For example, to install them on drive d: do + as follows: + + md d:\texfonts + copy a:*.fli d:\texfonts + + The last line has to be repeated for all suitable font diskettes. The + fonts should if possible not be put into a directory under \emtex, in + order to simplify the installation of a new version of emTeX (that is, + without having to copy the fonts again to the disk). + +3. The following environment variables should be set: + + dvidrvinput Search path for dvi files. + dvidrvfonts Search path for fli files. + dvidrvgraph Search path for graphic files. + + For example, this can be done by + + set dvidrvinput=c:\mytex;c:\emtex\doc + set dvidrvfonts=d:\texfonts + set dvidrvgraph=c:\mytex;c:\emtex\doc\gr$r + + The directory c:\emtex\doc resp. c:\emtex\doc\gr$r is used for printing + the dvidrv manual. + The value stored in DVIDRVFONTS will have the following appended to it by + prtp6l.bat, for example ($r will be replaced by the resolution): + + \pixel.p6l\$rdpi + + Therefore only a directory should be given, and this must not end with + a \. + All these lines should be put in the file autoexec.bat (for OS/2 + config.sys). \emtex\set-tex.bat or \emtex\set-tex.cmd can be used as + models, or modified and called by autoexec.bat. Important: $r and $s + must be written in small letters. + If you don't want to set the environment variables (or if you cannot), + you have to insert the desired directories into the configuration + files (*.cnf) after renaming. + +4. To use dviscr under OS/2, you should insert the line + + IOPL=YES + + into config.sys. If you don't need the OS/2 spooler, you should + disable it. + +4. Now the following batch files can be used: + + v Screen previewer (dviscr). + vs Screen previewer (dviscrs). + prthplj Printer driver (dvihplj: HP LaserJet+). + prthplj /od Printer driver (dvihplj: HP DeskJet). + prthplj /ok Printer driver (dvihplj: Kyocera F-1010). + prtp6l Printer driver (dvidot p6l: P6 with 180 DPI). + prtp6m Printer driver (dvidot p6m: P6 with 360x180 DPI). + prtp6h Printer driver (dvidot p6h: P6 with 360 DPI). + prtfx Printer driver (dvidot fx: EPSON FX-80). + prtlql Printer driver (dvidot lql: EPSON LQ, 180 DPI). + prtlqm Printer driver (dvidot lqm: EPSON LQ, 360x180 DPI). + prtlqh Printer driver (dvidot lqh: EPSON LQ, 360 DPI). + Note: not all LQ printers support 360 DPI. + prtitoh Printer driver (dvidot itoh: C.ITOH 8510A). + prtaiw Printer driver (dvidot aiw: Apple Imagewriter). + msplj Create graphic files (Parameters: lj.cnf) + mspp6l Create graphic files (Parameters: p6l.cnf) + mspp6m Create graphic files (Parameters: p6m.cnf) + mspp6h Create graphic files (Parameters: p6h.cnf) + mspfx Create graphic files (Parameters: fx.cnf) + mspito Create graphic files (Parameters: ito.cnf) + + If you have a version of DOS prior to 3.3, then you should change the + first line of these batch files from + + @echo off + + to + + echo off + + The batch files v.cmd, v.bat and vs.bat use the configuration file + lj.cnf (LJ fonts). If another configuration file is to be used, then + these batch files have to be changed correspondingly. If you don't have + the correct font files for your printer, the drivers can reduce the + existing font files in certain cases (marked with * in the table below; + loss of quality!). Gray mode is recommended for dviscr. Example: + Use + + @p6m.cnf /ox2 + + instead of + + @p6l_p6m.cnf + + with dviscr. This is the table of configuration files: + + File name | Resolution | Fonts | Font resolution + -------------+------------+---------+----------------- + lj.cnf | 300 | LJ | 300 + p6l.cnf | 180 | P6L | 180 + p6l_p6m.cnf *| 180 | P6M | 360x180 + p6l_p6h.cnf *| 180 | P6H | 360 + p6m.cnf | 360x180 | P6M | 360x180 + p6m_p6h.cnf *| 360x180 | P6H | 360 + p6h.cnf | 360 | P6H | 360 + fx.cnf | 240x216 | FX | 240x216 + ito.cnf | 160x144 | ITO | 160x144 + +6. Justify the margins. This procedure is described in dvidrv.doc under /la#. + The /la# and /ta# options should be put in the respective prt*.cmd/bat + files. + +7. If you're using a NEC P7, EPSON FX-100 or another wide (13.6") printer, + you have to modify the batch files prt*.cmd resp. prt*.bat. Examples: + prtfx.bat/cmd: + + old: dvidot fx80 @fx.cnf /po=prn %1 %2 %3 %4 %5 %6 %7 %8 %9 + new: dvidot fx100 @fx.cnf /po=prn %1 %2 %3 %4 %5 %6 %7 %8 %9 + + prtlql.bat/cmd: + + old: dvidot lql @p6l.cnf /po=prn %1 %2 %3 %4 %5 %6 %7 %8 %9 + new: dvidot lqwl @p6l.cnf /po=prn %1 %2 %3 %4 %5 %6 %7 %8 %9 + + prtp6h.bat/cmd: + + old: dvidot p6h @p6h.cnf /po=prn %1 %2 %3 %4 %5 %6 %7 %8 %9 + new: dvidot p7h @p6h.cnf /po=prn %1 %2 %3 %4 %5 %6 %7 %8 %9 + +8. Print the dvidrv manual (German): Install the DVIDRVMA package and follow + the instructions in dvidrvma.doc. + +9. If you need (and have) the big fonts for SliTeX, you have to change the + configuration file(s) to include the extra font library file. + Example (lj.cnf): + + old: /pl=%DVIDRVFONTS%;lj_0;lj_h;lj_1;lj_2;lj_3;lj_4;lj_5a;lj_5b + new: /pl=%DVIDRVFONTS%;lj_0;lj_h;lj_1;lj_2;lj_3;lj_4;lj_5a;lj_5b;lj_sli + + +------------------------------------------------------------------------------ +Further sources of information +------------------------------------------------------------------------------ + +The following files contain further information (dvi files can be looked at on +the screen with a screen previewer, or printed with a printer driver): + + \emtex\doc\english\texware.doc (TEX package, English) + \emtex\doc\german\texware.doc (TEX package, German) + + Calling TeX and its associated programs. + + \emtex\doc\germdoc.dvi (GTEX package, German, 4 pages) + + Instructions for german.sty. + + \emtex\doc\english\emtex.dvi (TEX package, English, 8 pages) + \emtex\doc\german\emtex.dvi (TEX package, German, 12 pages) + + Instructions for emTeX. + + \emtex\doc\latex.bug (LATEX package, English) + + Changes and known mistakes in LaTeX. + + \emtex\doc\local.gid (LATEX package, English) + + Ultra brief instructions for LaTeX. + + \emtex\doc\local.dvi (LATEX package, English, 20 pages) + + Implementation specific instructions for LaTeX. + + \emtex\doc\lkurz.dvi (GLATEX package, German, 46 pages) + + Brief instructions for LaTeX by H.Partl. + + \emtex\doc\english\mfware.doc (MF package, English) + \emtex\doc\german\mfware.doc (MF package, German) + + Calling METAFONT and its associated programs. + + \emtex\doc\english\mfjob.doc (MFWARE package, English) + \emtex\doc\german\mfjob.doc (MFWARE package, German) + + Instructions for the MFjob program. + + \emtex\doc\english\dvidrvma.doc (DVIDRVMA package, English) + \emtex\doc\german\dvidrvma.doc (DVIDRVMA package, German) + + Instructions for printing the dvidrv manual. + + \emtex\doc\english\dvidrv.dvi (DVIDRVMA package, English, 45 pp.) + \emtex\doc\german\dvidrv.dvi (DVIDRVMA package, German, 58 pages) + + Manual for the dvidrv drivers. + + \emtex\doc\english\dvidrv.doc (DVIDRV package, English) + \emtex\doc\german\dvidrv.doc (DVIDRV package, German) + + Instructions for the dvidrv drivers. Pay special attention to + the end (changes with respect to earlier versions). + + \emtex\doc\english\fontlib.doc (DVIDRV package, English) + \emtex\doc\german\fontlib.doc (DVIDRV package, German) + + Instructions for the fontlib program. + + \emtex\doc\english\makedot.doc (DVIDRV package, English) + \emtex\doc\german\makedot.doc (DVIDRV package, German) + + Provisional instructions for makedot. This is a supplement to + dvidot.doc. + + \emtex\doc\web.doc (WEB package, German) + + Calling the programs of the WEB system. + + \emtex\doc\english\pkedit.doc (PKEDIT package, English) + \emtex\doc\german\pkedit.doc (PKEDIT package, German) + + Instructions for the pkedit program. + + \emtex\doc\english\tcman.dvi (TEXCAD package, English, 13 pages) + \emtex\doc\german\tcman.dvi (TEXCAD package, German, 14 pages) + + The TeXcad manual. + + \emtex\texinput\webman.tex (WEB package, English) + + Manual for the WEB system. + + \emtex\texinput\makeindx.tex (MAKEINDX package, English) + + Instructions for MakeIndex. + + \emtex\doc\makeindx.doc (MAKEINDX package, English) + + Detailed instructions for MakeIndex. + + \emtex\doc\english\texchk.doc (TEXWARE package, English) + \emtex\doc\german\texchk.doc (TEXWARE package, German) + + Instructions for texchk. + + +------------------------------------------------------------------------------ +File names in the emTeX system +------------------------------------------------------------------------------ + + .aux Auxiliary file created and used by LaTeX + .bak Backup file (fontlib, pkedit) + .bas Fast-loading file for METAFONT (no, not BASIC) + .bat Batch file (DOS) + .bbl Output file of BibTeX + .bgi Video graphics driver (used by TeXcad) + .bib Bibliography database for BibTeX + .blg Transcript file (BibTeX) + .bst Bibliography style for BibTeX + .bug List of bugs + .ch Change file (TANGLE, WEAVE and MFT) + .chr Readable form of a pxl file (PXtoCH and CHtoPX) + .cmd Batch file (OS/2) + .cnf Configuration file for dvidrv + .dlg Transcript file (dvidrv) + .doc Instructions (straight text) or commented sty file + .dot Parameter file for dvidot + .dvi Device independent output of TeX + .err Error messages and warnings (dvidrv) + .exe Executable program + .fli Font library file (dvidrv) + .fmt Fast-loading file for TeX + .gf Font file created by METAFONT (usually .#gf) + .gft Default extension for the output of GFtype + .glo LaTeX auxiliary file for \glossary + .hlp On-line help + .idx Index entries (created by LaTeX) + .ilg MakeIndex transcript file + .ind Index entries (created by MakeIndex) + .lof LaTeX auxiliary file for \listoffigures + .log Transcript file (TeX and METAFONT) + .lot LaTeX auxiliary file for \listoftables + .mac TeXcad macro file + .mf Source text for a font + .mfj Job file for MFjob + .mft Style file for MFT + .msp Graphic file + .opt TeXcad parameters + .ovl Overlay + .pas Pascal source file (TANGLE) + .pcx Graphic file + .pic Picture environment created by TeXcad + .pk Compressed font file + .pkt Default extension for the output of PKtype + .pl Readable form of a tfm file + .poo String pool for INITEX or INIMF (pool file) + .pxl Font file + .rem Package contents listing for the remove program + .sty Document style or document style option for LaTeX + .sub Font substitution file (dvidrv) + .tcp TeX code page (translation of code pages and special characters) + .tex TeX text + .tfm Symbol widths and other properties of a font (font metrics) + .toc Notes of LaTeX for contents + .ver List of program versions (TeXcad) + .vf Virtual font (dvidrv, VFtoVP, VPtoVF) + .vpl Readable form of a vf file (VFtoVP and VPtoVF) + .web WEB source text (TANGLE and WEAVE) + .zip Archive file (collection of compressed files) + +(No claim as to completeness.) + + +------------------------------------------------------------------------------ +File list +------------------------------------------------------------------------------ + +The abbreviation CM stands for Computer Modern. A `*' at the beginning of a +line denotes a change from the emTeX distribution of 29-Mar-1990, and a '+' +marks a newly added file. + + +BIBTEX package +-------------- + +* \emtex\bibtex.exe BibTeX + + \emtex\bibinput\btxdoc.bib Bibliography database for btxdoc.tex + \emtex\bibinput\xampl.bib Database of examples + + \emtex\texinput\abbrv.bst Bibliography style `abbrv' + \emtex\texinput\alpha.bst Bibliography style `alpha' + \emtex\texinput\plain.bst Bibliography style `plain' + \emtex\texinput\unsrt.bst Bibliography style `unsrt' + \emtex\texinput\btxbst.doc Source file for plain Bibliography Styles + \emtex\texinput\btxdoc.tex Instructions for BibTeX + \emtex\texinput\btxhak.tex Instructions: creating Bibliography Styles + ++ \emtex\remove\bibtex.rem Package contents listing for `remove' + + +BLATEX package +-------------- + + \emtex\blatex.bat Calling LaTeX (American hyphenation) + \emtex\blatex.cmd Calling LaTeX (American hyphenation) + +* \emtex\btexfmts\lplain.fmt fmt file for LaTeX (Amer. hyphenation) +* \emtex\btexfmts\lplain.log log file of lplain.fmt ++ \emtex\btexfmts\slifmt.cmd Create fmt file for SliTeX ++ \emtex\btexfmts\slifmt.bat Create fmt file for SliTeX + ++ \emtex\remove\blatex.rem Package contents listing for `remove' + + +BMF package +----------- + +* \emtex\bmf.exe BigMETAFONT (DOS) +* \emtex\bmf286.exe BigMETAFONT (DOS, 80286 CPU) +* \emtex\bmfp.exe BigMETAFONT (OS/2 protected mode) + + \emtex\bmfbases\bas.bat Create bas files + \emtex\bmfbases\bas.cmd Create bas files +* \emtex\bmfbases\cm.bas Computer Modern METAFONT base +* \emtex\bmfbases\cm.log log file to cm.bas +* \emtex\bmfbases\mf.poo Pool file (string list) for INIMF +* \emtex\bmfbases\plain.bas plain METAFONT base +* \emtex\bmfbases\plain.log log file of plain.bas + ++ \emtex\remove\bmf.rem Package contents listing for `remove' + + +BTEX package +------------ + +* \emtex\btex.exe BigTeX (DOS) +* \emtex\btex286.exe BigTeX (DOS, 80286 CPU) +* \emtex\btexp.exe BigTeX (OS/2 protected mode) + +* \emtex\btexfmts\fmt.bat Create fmt files +* \emtex\btexfmts\fmt.cmd Create fmt files +* \emtex\btexfmts\plain.fmt plain TeX (American hyphenation) +* \emtex\btexfmts\plain.log log file of plain.fmt +* \emtex\btexfmts\tex.poo Pool file (string list) for INITeX + ++ \emtex\remove\btex.rem Package contents listing for `remove' + + +DVIDRV package +-------------- + ++ \emtex\doc\english\dvidrv.doc Instructions for dvidrv (English) +* \emtex\doc\german\dvidrv.doc Instructions for dvidrv (German) ++ \emtex\doc\english\pcltomsp.doc Instructions for PCLtoMSP (English) +* \emtex\doc\german\pcltomsp.doc Instructions for PCLtoMSP (German) ++ \emtex\doc\english\makedot.doc Instructions for makedot (English) ++ \emtex\doc\german\makedot.doc Instructions for makedot (German) ++ \emtex\doc\english\fontlib.doc Instructions for fontlib (English) +* \emtex\doc\german\fontlib.doc Instructions for fontlib (German) + \emtex\doc\adjust.dvi dvi file for adjusting margins + ++ \emtex\dvidrv.err Error messages and warnings +* \emtex\dviscr.exe Screen previewer +* \emtex\dviscrs.exe Screen previewer (DOS and small memory) +* \emtex\dvihplj.exe Driver for HP LaserJet+ ++ \emtex\dvidot.exe Generic dot-matrix printer driver +* \emtex\dvimsp.exe Create graphic files from dvi files +* \emtex\dvivik.exe Screen Previewer for Viking I ++ \emtex\makedot.exe Convert dvidot parameter files + \emtex\fontlib.exe Create and maintain font library files +* \emtex\pcltomsp.exe Convert pcl files to graphic files ++ \emtex\fx80.dot Parameter file for EPSON FX-80 ++ \emtex\fx100.dot Parameter file for EPSON FX-100 ++ \emtex\aiw.dot Parameter file for Apple Imagewriter ++ \emtex\itoh.dot Parameter file for C.ITOH 8510A ++ \emtex\p6l.dot Parameter file for NEC P6 (180 DPI) ++ \emtex\p6m.dot Parameter file for NEC P6 (360x180 DPI) ++ \emtex\p6h.dot Parameter file for NEC P6 (360 DPI) ++ \emtex\p7l.dot Parameter file for NEC P7 (180 DPI) ++ \emtex\p7m.dot Parameter file for NEC P7 (360x180 DPI) ++ \emtex\p7h.dot Parameter file for NEC P7 (360 DPI) ++ \emtex\lql.dot Parameter file for EPSON LQ (180 DPI) ++ \emtex\lqm.dot Parameter file for EPSON LQ (360x180 DPI) ++ \emtex\lqh.dot Parameter file for EPSON LQ (360 DPI) ++ \emtex\lqwl.dot Parameter file for EPSON LQ (180 DPI) ++ \emtex\lqwm.dot Parameter file for EPSON LQ (360x180 DPI) ++ \emtex\lqwh.dot Parameter file for EPSON LQ (360 DPI) ++ \emtex\dmp130.dot Parameter file for Tandy DMP-130 ++ \emtex\ibm4201.dot Parameter file for IBM 4201 (240x216 DPI) ++ \emtex\ibm4202.dot Parameter file for IBM 4202 (240x216 DPI) ++ \emtex\ibm4207l.dot Parameter file for IBM 4207 (180 DPI) ++ \emtex\ibm4207m.dot Parameter file for IBM 4207 (360x180 DPI) ++ \emtex\ibm4208l.dot Parameter file for IBM 4208 (180 DPI) ++ \emtex\ibm4208m.dot Parameter file for IBM 4208 (360x180 DPI) +* \emtex\v.cmd Call for dviscr +* \emtex\v.bat Call for dviscr +* \emtex\vs.bat Call for dviscrs +* \emtex\prtfx.cmd Call for dvidot fx80 +* \emtex\prtfx.bat Call for dvidot fx80 +* \emtex\prthplj.cmd Call for dvihplj +* \emtex\prthplj.bat Call for dvihplj +* \emtex\prtp6l.cmd Call for dvidot p6l +* \emtex\prtp6l.bat Call for dvidot p6l +* \emtex\prtp6m.cmd Call for dvidot p6m +* \emtex\prtp6m.bat Call for dvidot p6m +* \emtex\prtp6h.cmd Call for dvidot p6h +* \emtex\prtp6h.bat Call for dvidot p6h ++ \emtex\prtlql.cmd Call for dvidot lql ++ \emtex\prtlql.bat Call for dvidot lql ++ \emtex\prtlqm.cmd Call for dvidot lqm ++ \emtex\prtlqm.bat Call for dvidot lqm ++ \emtex\prtlqh.cmd Call for dvidot lqh ++ \emtex\prtlqh.bat Call for dvidot lqh +* \emtex\prtitoh.cmd Call for dvidot itoh +* \emtex\prtitoh.bat Call for dvidot itoh +* \emtex\prtaiw.cmd Call for dvidot aiw +* \emtex\prtaiw.bat Call for dvidot aiw +* \emtex\mspfx.bat Call for dvimsp.exe (with fx.cnf) +* \emtex\mspfx.cmd Call for dvimsp.exe (with fx.cnf) +* \emtex\msplj.bat Call for dvimsp.exe (with lj.cnf) +* \emtex\msplj.cmd Call for dvimsp.exe (with lj.cnf) + \emtex\mspp6l.bat Call for dvimsp.exe (with p6l.cnf) + \emtex\mspp6l.cmd Call for dvimsp.exe (with p6l.cnf) + \emtex\mspp6m.bat Call for dvimsp.exe (with p6m.cnf) + \emtex\mspp6m.cmd Call for dvimsp.exe (with p6m.cnf) + \emtex\mspp6h.bat Call for dvimsp.exe (with p6h.cnf) + \emtex\mspp6h.cmd Call for dvimsp.exe (with p6h.cnf) +* \emtex\mspito.bat Call for dvimsp.exe (with ito.cnf) +* \emtex\mspito.cmd Call for dvimsp.exe (with ito.cnf) +* \emtex\lj.cnf Configuration file: 300 DPI, LJ +* \emtex\p6l.cnf Configuration file: 180 DPI, P6L ++ \emtex\p6l_p6m.cnf Configuration file: 180 DPI, P6M ++ \emtex\p6l_p6h.cnf Configuration file: 180 DPI, P6H +* \emtex\p6m.cnf Configuration file: 360x180 DPI, P6M +* \emtex\p6m_p6h.cnf Configuration file: 360x180 DPI, P6H +* \emtex\p6h.cnf Configuration file: 360 DPI, P6H +* \emtex\ito.cnf Configuration file: 160x144 DPI, ITO +* \emtex\fx.cnf Configuration file: 240x216 DPI, FX ++ \emtex\oldfonts.sub Font substitution file (use old font libs) ++ \emtex\newfonts.sub Font substitution file (use new font libs) ++ \emtex\fontlist Font list (used with fontlib) ++ \emtex\newfonts.bat Convert font library files to new format ++ \emtex\newfonts.cmd Convert font library files to new format ++ \emtex\oldfonts.bat Convert font library files to old format ++ \emtex\oldfonts.cmd Convert font library files to old format ++ \emtex\fli_lj.cmd Create font library files LJ_* ++ \emtex\fli_fx.cmd Create font library files FX_* ++ \emtex\fli_p6l.cmd Create font library files P6L_* ++ \emtex\fli_p6m.cmd Create font library files P6M_* ++ \emtex\fli_p6h.cmd Create font library files P6H_* ++ \emtex\fli_ito.cmd Create font library files ITO_* ++ \emtex\ilf_lj.cmd Unpack font library files LJ_* ++ \emtex\ilf_fx.cmd Unpack font library files FX_* ++ \emtex\ilf_p6l.cmd Unpack font library files P6L_* ++ \emtex\ilf_p6m.cmd Unpack font library files P6M_* ++ \emtex\ilf_p6h.cmd Unpack font library files P6H_* ++ \emtex\ilf_ito.cmd Unpack font library files ITO_* + ++ \emtex\remove\dvidrv.rem Package contents listing for `remove' + + +DVIDRVMA package +---------------- + ++ \emtex\doc\english\dvidrvma.doc Printing the dvidrv manual (English) ++ \emtex\doc\english\dvidrv.dvi The dvidrv manual (English) +* \emtex\doc\german\dvidrvma.doc Printing the dvidrv manual (German) +* \emtex\doc\german\dvidrv.dvi The dvidrv manual (German) + + \emtex\doc\gr180\dvitrans.0 Graphic file (180 DPI) + \emtex\doc\gr180\dvitrans.1 Graphic file (180 DPI) + \emtex\doc\gr180\dvitrans.2 Graphic file (180 DPI) + \emtex\doc\gr180\dvitrans.3 Graphic file (180 DPI) + \emtex\doc\gr180\dvitrans.4 Graphic file (180 DPI) + \emtex\doc\gr180\dvitrans.5 Graphic file (180 DPI) + \emtex\doc\gr180\dvitrans.6 Graphic file (180 DPI) + \emtex\doc\gr180\dvitrans.7 Graphic file (180 DPI) + + \emtex\doc\gr300\dvitrans.0 Graphic file (300 DPI) + \emtex\doc\gr300\dvitrans.1 Graphic file (300 DPI) + \emtex\doc\gr300\dvitrans.2 Graphic file (300 DPI) + \emtex\doc\gr300\dvitrans.3 Graphic file (300 DPI) + \emtex\doc\gr300\dvitrans.4 Graphic file (300 DPI) + \emtex\doc\gr300\dvitrans.5 Graphic file (300 DPI) + \emtex\doc\gr300\dvitrans.6 Graphic file (300 DPI) + \emtex\doc\gr300\dvitrans.7 Graphic file (300 DPI) + + \emtex\doc\gr360\dvitrans.0 Graphic file (360 DPI) + \emtex\doc\gr360\dvitrans.1 Graphic file (360 DPI) + \emtex\doc\gr360\dvitrans.2 Graphic file (360 DPI) + \emtex\doc\gr360\dvitrans.3 Graphic file (360 DPI) + \emtex\doc\gr360\dvitrans.4 Graphic file (360 DPI) + \emtex\doc\gr360\dvitrans.5 Graphic file (360 DPI) + \emtex\doc\gr360\dvitrans.6 Graphic file (360 DPI) + \emtex\doc\gr360\dvitrans.7 Graphic file (360 DPI) + ++ \emtex\remove\dvidrvma.rem Package contents listing for `remove' + + +EMSY package +------------ + + \emtex\emsyproo.bat Create proof sheet for emsy10 + \emtex\emsysmok.bat Create smoke proof for emsy10 + + \emtex\texinput\emsymb.sty Document style option: emsymb + \emtex\texinput\emsymb.tex Macros for plain TeX + + \emtex\mfinput\emsy.mf em symbol font + \emtex\mfinput\emsy10.mf em symbol font 10pt + \emtex\mfinput\emsy5.mf em symbol font 5pt + \emtex\mfinput\emsy6.mf em symbol font 6pt + \emtex\mfinput\emsy7.mf em symbol font 7pt + \emtex\mfinput\emsy8.mf em symbol font 8pt + \emtex\mfinput\emsy9.mf em symbol font 9pt + + \emtex\tfm\emsy10.tfm em symbol font 10pt + \emtex\tfm\emsy5.tfm em symbol font 5pt + \emtex\tfm\emsy6.tfm em symbol font 6pt + \emtex\tfm\emsy7.tfm em symbol font 7pt + \emtex\tfm\emsy8.tfm em symbol font 8pt + \emtex\tfm\emsy9.tfm em symbol font 9pt + + \emtex\mfjob\emsy.mfj MFjob file for emsy fonts + ++ \emtex\remove\emsy.rem Package contents listing for `remove' + + +GBLATEX package +--------------- + +* \emtex\gblatex.bat Calling LaTeX (German hyphenation) +* \emtex\gblatex.cmd Calling LaTeX (German hyphenation) + +* \emtex\btexfmts\lplaing.fmt fmt file for LaTeX (German hyphenation) +* \emtex\btexfmts\lplaing.log log file of lplaing.fmt ++ \emtex\btexfmts\gslifmt.cmd Create fmt file for SliTeX ++ \emtex\btexfmts\gslifmt.bat Create fmt file for SliTeX + ++ \emtex\remove\gblatex.rem Package contents listing for `remove' + + +GBTEX package +------------- + ++ \emtex\btexfmts\gfmt.bat Create fmt files ++ \emtex\btexfmts\gfmt.cmd Create fmt files +* \emtex\btexfmts\plaing.fmt plain TeX (German hyphenation) +* \emtex\btexfmts\plaing.log log file of plaing.fmt + ++ \emtex\remove\gbtex.rem Package contents listing for `remove' + + +GLATEX package +-------------- + +* \emtex\doc\lkurz.dvi LaTeX brief instructions of H. Partl (German) + +* \emtex\glatex.bat Call LaTeX (German hyphenation) +* \emtex\glatex.cmd Call LaTeX (German hyphenation) + +* \emtex\texfmts\lplaing.fmt fmt file for LaTeX (German hyphenation) +* \emtex\texfmts\lplaing.log log file of lplaing.fmt ++ \emtex\texfmts\gslifmt.cmd Create fmt file for SliTeX ++ \emtex\texfmts\gslifmt.bat Create fmt file for SliTeX + ++ \emtex\remove\glatex.rem Package contents listing for `remove' + + +GTEX package +------------ + +* \emtex\doc\germdoc.dvi Instructions for german.sty + +* \emtex\gtex.bat Call plain TeX (German hyphenation) +* \emtex\gtex.cmd Call plain TeX (German hyphenation) + +* \emtex\texfmts\plaing.fmt plain TeX (German hyphenation) +* \emtex\texfmts\plaing.log log file of plaing.fmt ++ \emtex\texfmts\gfmt.bat Create fmt files ++ \emtex\texfmts\gfmt.cmd Create fmt files + ++ \emtex\texinput\ghyphen.min German hyphenations patterns ++ \emtex\texinput\ghyphen.max German hyphenations patterns (for bigTeX) +* \emtex\texinput\german.sty Uniform German TeX commands +* \emtex\texinput\germdoc.tex Instructions for german.sty + ++ \emtex\remove\gtex.rem Package contents listing for `remove' + + +LATEX package +------------- + +* \emtex\doc\latex.bug Bugs in and changes to LaTeX +* \emtex\doc\latex.ins Installation instructions (not needed) + \emtex\doc\local.gid Ultra brief instructions +* \emtex\doc\local.dvi Local guide + + \emtex\latex.bat Call LaTeX (American hyphenation) + \emtex\latex.cmd Call LaTeX (American hyphenation) + +* \emtex\texfmts\lplain.fmt fmt file for LaTeX (Amer. hyphenation) +* \emtex\texfmts\lplain.log log file of lplain.fmt ++ \emtex\texfmts\slifmt.cmd Create fmt file for SliTeX ++ \emtex\texfmts\slifmt.bat Create fmt file for SliTeX + ++ \emtex\texinput\a4.sty Document style option: A4 page format +* \emtex\texinput\addendum.tex Include file for local.tex +* \emtex\texinput\art10.sty Document style option: article 10pt +* \emtex\texinput\art11.sty Document style option: article 11pt +* \emtex\texinput\art12.sty Document style option: article 12pt +* \emtex\texinput\article.sty Document style: article +* \emtex\texinput\bezier.sty Document style: bezier +* \emtex\texinput\bk10.sty Document style option: book 10pt +* \emtex\texinput\bk11.sty Document style option: book 11pt +* \emtex\texinput\bk12.sty Document style option: book 12pt +* \emtex\texinput\book.sty Document style: book +* \emtex\texinput\fleqn.sty Document style option: fleqn +* \emtex\texinput\idx.tex idx file to print +* \emtex\texinput\ifthen.sty Document style option: ifthen +* \emtex\texinput\lablst.tex Print contents and cross references +* \emtex\texinput\latex.tex LaTeX source file +* \emtex\texinput\leqno.sty Document style option: leqno +* \emtex\texinput\letter.sty Document style: letter + \emtex\texinput\letter.tex Information on letter.sty +* \emtex\texinput\lfonts.tex LaTeX source file (font definitions) ++ \emtex\texinput\lhyphen.ger Load German hyphenation patterns ++ \emtex\texinput\lhyphen.tex Load English hyphenation patterns +* \emtex\texinput\local.tex Local guide +* \emtex\texinput\lplain.tex LaTeX source file +* \emtex\texinput\makeidx.sty Document style option: makeidx +* \emtex\texinput\openbib.sty Document style option: openbib +* \emtex\texinput\proc.sty Document style: proc +* \emtex\texinput\rep10.sty Document style option: report 10pt +* \emtex\texinput\rep11.sty Document style option: report 11pt +* \emtex\texinput\rep12.sty Document style option: report 12pt +* \emtex\texinput\report.sty Document style: report +* \emtex\texinput\sample.tex Example text +* \emtex\texinput\sfonts.tex SliTeX source file (font definitions) +* \emtex\texinput\showidx.sty Document style option: showidx +* \emtex\texinput\slides.sty Document style: slide +* \emtex\texinput\slitex.tex SliTeX source file +* \emtex\texinput\small.tex Example text +* \emtex\texinput\splain.tex SliTeX source file + \emtex\texinput\suthesis.sty Doc. style option: Stanford Univ. PhD thesis ++ \emtex\texinput\testa4.tex Test page (for margins) +* \emtex\texinput\testpage.tex Test page (for margins) +* \emtex\texinput\titlepag.sty Document style option: titlepage + \emtex\texinput\tryfonts.tex Try text fonts +* \emtex\texinput\twocolum.sty Document style option: twocolumn + ++ \emtex\tfm\lcircle1.tfm LaTeX circle font (thin) ++ \emtex\tfm\lcirclew.tfm LaTeX circle font (wide) + \emtex\tfm\lasy10.tfm LaTeX symbols 10pt + \emtex\tfm\lasy5.tfm LaTeX symbols 5pt + \emtex\tfm\lasy6.tfm LaTeX symbols 6pt + \emtex\tfm\lasy7.tfm LaTeX symbols 7pt + \emtex\tfm\lasy8.tfm LaTeX symbols 8pt + \emtex\tfm\lasy9.tfm LaTeX symbols 9pt + \emtex\tfm\lasyb10.tfm Bold LaTeX symbols 9pt + \emtex\tfm\lcmss8.tfm SliTeX sans serif 8pt + \emtex\tfm\lcmssb8.tfm SliTeX sans serif Bold 8pt + \emtex\tfm\lcmssi8.tfm SliTeX sans slanted 8pt + \emtex\tfm\line10.tfm LaTeX line font (small) + \emtex\tfm\linew10.tfm LaTeX line font (wide) ++ \emtex\tfm\icmcsc10.tfm Invisible cmcsc10 + \emtex\tfm\icmex10.tfm Invisible cmex10 + \emtex\tfm\icmmi8.tfm Invisible cmmi8 + \emtex\tfm\icmsy8.tfm Invisible cmsy8 + \emtex\tfm\icmtt8.tfm Invisible cmtt8 + \emtex\tfm\ilasy8.tfm Invisible lasy8 + \emtex\tfm\ilcmss8.tfm Invisible lcmss8 + \emtex\tfm\ilcmssb8.tfm Invisible lcmssb8 + \emtex\tfm\ilcmssi8.tfm Invisible lcmssi8 + ++ \emtex\remove\latex.rem Package contents listing for `remove' + + +LATEXDOC package +---------------- + +* \emtex\texinput\art10.doc Document style option: article 10pt +* \emtex\texinput\art11.doc Document style option: article 11pt +* \emtex\texinput\art12.doc Document style option: article 12pt +* \emtex\texinput\article.doc Document style: article +* \emtex\texinput\bezier.doc Document style: bezier +* \emtex\texinput\bk10.doc Document style option: book 10pt +* \emtex\texinput\bk11.doc Document style option: book 11pt +* \emtex\texinput\bk12.doc Document style option: book 12pt +* \emtex\texinput\book.doc Document style: book +* \emtex\texinput\fleqn.doc Document style option: fleqn +* \emtex\texinput\ifthen.doc Document style option: ifthen +* \emtex\texinput\leqno.doc Document style option: leqno +* \emtex\texinput\letter.doc Document style: letter +* \emtex\texinput\makeidx.doc Document style option: makeidx +* \emtex\texinput\openbib.doc Document style option: openbib +* \emtex\texinput\proc.doc Document style: proc +* \emtex\texinput\rep10.doc Document style option: report 10pt +* \emtex\texinput\rep11.doc Document style option: report 11pt +* \emtex\texinput\rep12.doc Document style option: report 12pt +* \emtex\texinput\report.doc Document style: report +* \emtex\texinput\showidx.doc Document style option: showidx +* \emtex\texinput\slides.doc Document style: slide + \emtex\texinput\suthesis.doc Doc. style option: Stanford Univ. PhD thesis +* \emtex\texinput\titlepag.doc Document style option: titlepage +* \emtex\texinput\twocolum.doc Document style option: twocolumn + ++ \emtex\remove\latexdoc.rem Package contents listing for `remove' + + +LKURZ package +------------- + +* \emtex\texinput\lkurz.tex LaTeX brief instructions (German) +* \emtex\texinput\lksym.tex LaTeX brief instructions (include file) +* \emtex\texinput\lk1.tex LaTeX brief instructions (include file) +* \emtex\texinput\lk2.tex LaTeX brief instructions (include file) +* \emtex\texinput\lk3.tex LaTeX brief instructions (include file) +* \emtex\texinput\lk4.tex LaTeX brief instructions (include file) + ++ \emtex\remove\lkurz.rem Package contents listing for `remove' + + +MAKEINDX package +---------------- + +* \emtex\makeindx.exe MakeIndex program +* \emtex\doc\makeindx.cpy Distribution notice for MakeIndex ++ \emtex\doc\makeindx.doc Detailed instructions for MakeIndex +* \emtex\texinput\makeindx.tex Instructions for MakeIndex + ++ \emtex\remove\makeindx.rem Package contents listing for `remove' + + +MF package +---------- + ++ \emtex\doc\english\mfware.doc Instructions for METAFONT etc. (English) +* \emtex\doc\german\mfware.doc Instructions for METAFONT etc. (German) +* \emtex\doc\cm85.bug Mistakes list for CM fonts + +* \emtex\mf.exe METAFONT (DOS, OS/2 real mode) +* \emtex\mf286.exe METAFONT (DOS, OS/2 real mode, 80286 CPU) +* \emtex\mfp.exe METAFONT (OS/2 protected mode) ++ \emtex\mfpm.ovl Graphic output for mfp.exe (overlay) + + \emtex\mfbases\bas.bat Create bas files + \emtex\mfbases\bas.cmd Create bas files +* \emtex\mfbases\cm.bas Computer Modern METAFONT base +* \emtex\mfbases\cm.log Log file for cm.bas + \emtex\mfbases\mf.poo Pool file (string list) for INIMF +* \emtex\mfbases\plain.bas Plain METAFONT base +* \emtex\mfbases\plain.log Log file for plain.bas + + \emtex\mfinput\3test.mf Font tests + \emtex\mfinput\5test.mf Font tests + \emtex\mfinput\6test.mf Font tests + \emtex\mfinput\accent.mf Accents for roman/italic fonts + \emtex\mfinput\bigacc.mf Big accents for cmex# + \emtex\mfinput\bigdel.mf Big delimiter for cmex# + \emtex\mfinput\bigop.mf Big operators for cmex# + \emtex\mfinput\btest.mf Font tests + \emtex\mfinput\calu.mf Calligraphic capitals ++ \emtex\mfinput\lcircle.mf LaTeX circles and arcs ++ \emtex\mfinput\lcircle1.mf LaTeX circles and arcs (small) ++ \emtex\mfinput\lcirclew.mf LaTeX circles and arcs (wide) + \emtex\mfinput\cm.ini Create CM base + \emtex\mfinput\cmb10.mf CM Bold Roman 10pt + \emtex\mfinput\cmbase.mf CM Base + \emtex\mfinput\cmbsy10.mf CM Bold Math Symbols 10pt + \emtex\mfinput\cmbx10.mf CM Bold Extended Roman 10pt + \emtex\mfinput\cmbx12.mf CM Bold Extended Roman 12pt + \emtex\mfinput\cmbx5.mf CM Bold Extended Roman 5pt + \emtex\mfinput\cmbx6.mf CM Bold Extended Roman 6pt + \emtex\mfinput\cmbx7.mf CM Bold Extended Roman 7pt + \emtex\mfinput\cmbx8.mf CM Bold Extended Roman 8pt + \emtex\mfinput\cmbx9.mf CM Bold Extended Roman 9pt + \emtex\mfinput\cmbxsl10.mf CM Bold Extended Slanted Roman 10pt + \emtex\mfinput\cmbxti10.mf CM Bold Extended Text Italic 10pt + \emtex\mfinput\cmcsc10.mf CM Roman Caps and Small Caps 10pt + \emtex\mfinput\cmdunh10.mf CM Dunhill Roman 10pt + \emtex\mfinput\cmex10.mf CM Math Extension 10pt + \emtex\mfinput\cmex9.mf CM Math Extension 9pt + \emtex\mfinput\cmff10.mf CM Funny Roman 10pt + \emtex\mfinput\cmfi10.mf CM Funny Italic 10pt + \emtex\mfinput\cmfib8.mf CM Roman Fibonacci Font 10pt + \emtex\mfinput\cminch.mf CM Inch-High Sans Serif Bold Ext. Caps & Dig + \emtex\mfinput\cmitt10.mf CM Italic Typewriter Text (10pt) + \emtex\mfinput\cmmi10.mf CM Math Italic 10pt + \emtex\mfinput\cmmi12.mf CM Math Italic 12pt + \emtex\mfinput\cmmi5.mf CM Math Italic 5pt + \emtex\mfinput\cmmi6.mf CM Math Italic 6pt + \emtex\mfinput\cmmi7.mf CM Math Italic 7pt + \emtex\mfinput\cmmi8.mf CM Math Italic 8pt + \emtex\mfinput\cmmi9.mf CM Math Italic 9pt + \emtex\mfinput\cmmib10.mf CM Math Italic Bold 10pt + \emtex\mfinput\cmr10.mf CM Roman 10pt + \emtex\mfinput\cmr12.mf CM Roman 12pt + \emtex\mfinput\cmr17.mf CM Roman 17pt + \emtex\mfinput\cmr5.mf CM Roman 5pt + \emtex\mfinput\cmr6.mf CM Roman 6pt + \emtex\mfinput\cmr7.mf CM Roman 7pt + \emtex\mfinput\cmr8.mf CM Roman 8pt + \emtex\mfinput\cmr9.mf CM Roman 9pt + \emtex\mfinput\cmsl10.mf CM Slanted Roman 10pt + \emtex\mfinput\cmsl12.mf CM Slanted Roman 12pt + \emtex\mfinput\cmsl8.mf CM Slanted Roman 8pt + \emtex\mfinput\cmsl9.mf CM Slanted Roman 9pt + \emtex\mfinput\cmsltt10.mf CM Slanted Typewriter Text (10pt) + \emtex\mfinput\cmss10.mf CM Sans Serif 10pt + \emtex\mfinput\cmss12.mf CM Sans Serif 12pt + \emtex\mfinput\cmss17.mf CM Sans Serif 17pt + \emtex\mfinput\cmss8.mf CM Sans Serif 8pt + \emtex\mfinput\cmss9.mf CM Sans Serif 9pt + \emtex\mfinput\cmssbx10.mf CM Sans Serif Bold Extended 10pt + \emtex\mfinput\cmssdc10.mf CM Sans Serif Demibold Condensed 10pt + \emtex\mfinput\cmssi10.mf CM Slanted Sans Serif 10pt + \emtex\mfinput\cmssi12.mf CM Slanted Sans Serif 12pt + \emtex\mfinput\cmssi17.mf CM Slanted Sans Serif 17pt + \emtex\mfinput\cmssi8.mf CM Slanted Sans Serif 8pt + \emtex\mfinput\cmssi9.mf CM Slanted Sans Serif 9pt + \emtex\mfinput\cmssq8.mf CM Sans Serif Quotation Style 8pt + \emtex\mfinput\cmssqi8.mf CM Sans Serif Quotation Style Slanted 8pt + \emtex\mfinput\cmsy10.mf CM Math Symbols 10pt + \emtex\mfinput\cmsy5.mf CM Math Symbols 5pt + \emtex\mfinput\cmsy6.mf CM Math Symbols 6pt + \emtex\mfinput\cmsy7.mf CM Math Symbols 7pt + \emtex\mfinput\cmsy8.mf CM Math Symbols 8pt + \emtex\mfinput\cmsy9.mf CM Math Symbols 9pt + \emtex\mfinput\cmtcsc10.mf CM Typewriter Caps and Small Caps (10pt) + \emtex\mfinput\cmtex10.mf CM TeX Extended ASCII characters (10pt) + \emtex\mfinput\cmtex8.mf CM TeX Extended ASCII characters (8pt) + \emtex\mfinput\cmtex9.mf CM TeX Extended ASCII characters (9pt) + \emtex\mfinput\cmti10.mf CM Text Italic 10pt + \emtex\mfinput\cmti12.mf CM Text Italic 12pt + \emtex\mfinput\cmti7.mf CM Text Italic 7pt + \emtex\mfinput\cmti8.mf CM Text Italic 8pt + \emtex\mfinput\cmti9.mf CM Text Italic 9pt + \emtex\mfinput\cmtt10.mf CM Typewriter Text (10pt) + \emtex\mfinput\cmtt12.mf CM Typewriter Text (12pt) + \emtex\mfinput\cmtt8.mf CM Typewriter Text (8pt) + \emtex\mfinput\cmtt9.mf CM Typewriter Text (9pt) + \emtex\mfinput\cmu10.mf CM Unslanted Italic 10pt + \emtex\mfinput\cmvtt10.mf CM Variable-Width Typewriter Text (10pt) + \emtex\mfinput\comlig.mf Ligatures for roman/italic fonts + \emtex\mfinput\csc.mf Caps and small Ccaps + \emtex\mfinput\cscspu.mf `I', `J', `ss' for caps and small caps + \emtex\mfinput\ctest.mf Font tests + \emtex\mfinput\ega.mf Changes for EGA + \emtex\mfinput\expr.mf Examples from the METAFONTbook + \emtex\mfinput\ftest.mf Font tests + \emtex\mfinput\grayf.mf Create gray font + \emtex\mfinput\greekl.mf Small Greek letters + \emtex\mfinput\greeku.mf Large Greek letters + \emtex\mfinput\halftone.mf Create halftone font + \emtex\mfinput\icmex10.mf CM Math Extension 10pt invisible + \emtex\mfinput\icmmi8.mf CM Math Italic 10pt invisible + \emtex\mfinput\icmsy8.mf CM Math Symbols 10pt invisible + \emtex\mfinput\icmtt8.mf CM Typewriter Text 10pt invisible + \emtex\mfinput\ilasy8.mf LaTeX Symbols 8pt invisible + \emtex\mfinput\ilcmss8.mf SliTeX Sans Serif 8pt invisble + \emtex\mfinput\ilcmssb8.mf SliTeX Sans Serif Bold 8pt invisble + \emtex\mfinput\ilcmssi8.mf SliTeX Sans Serif Slanted 8pt invisble + \emtex\mfinput\io.mf Examples from the METAFONTbook + \emtex\mfinput\itald.mf CM Italic (digits) + \emtex\mfinput\italig.mf CM Italic (f-Ligatures) + \emtex\mfinput\itall.mf CM Italic (small letters) + \emtex\mfinput\italms.mf CM Math Italic (various symbols) + \emtex\mfinput\italp.mf CM Italic (`$', `&', `?') + \emtex\mfinput\italsp.mf CM Italic (Special symbols) + \emtex\mfinput\itest.mf Font tests + \emtex\mfinput\lasy.mf LaTeX Symbols + \emtex\mfinput\lasy10.mf LaTeX Symbols 10pt + \emtex\mfinput\lasy5.mf LaTeX Symbols 5pt + \emtex\mfinput\lasy6.mf LaTeX Symbols 6pt + \emtex\mfinput\lasy7.mf LaTeX Symbols 7pt + \emtex\mfinput\lasy8.mf LaTeX Symbols 8pt + \emtex\mfinput\lasy9.mf LaTeX Symbols 9pt + \emtex\mfinput\lasyb10.mf Bold LaTeX Symbols 9pt + \emtex\mfinput\lcmss8.mf SliTeX Sans Serif 8pt + \emtex\mfinput\lcmssb8.mf SliTeX Sans Serif Bold 8pt + \emtex\mfinput\lcmssi8.mf SliTeX Sans Slanted 8pt + \emtex\mfinput\line.mf LaTeX line segments + \emtex\mfinput\line10.mf LaTeX line segments (small) + \emtex\mfinput\linew10.mf LaTeX line segments (wide) +* \emtex\mfinput\local.mf Local changes for plain/cm +* \emtex\mfinput\logo.mf METAFONT logo + \emtex\mfinput\logo10.mf METAFONT logo 10pt + \emtex\mfinput\logo8.mf METAFONT logo 8pt + \emtex\mfinput\logo9.mf METAFONT logo 9pt + \emtex\mfinput\logobf10.mf Boldface METAFONT logo 10pt + \emtex\mfinput\logosl10.mf Slanted METAFONT logo 10pt + \emtex\mfinput\mathex.mf CM Math Extension + \emtex\mfinput\mathit.mf CM Math Italic + \emtex\mfinput\mathsy.mf CM Symbols + \emtex\mfinput\mtest.mf Font tests + \emtex\mfinput\olddig.mf Digits in old style + \emtex\mfinput\plain.ini Create plain base +* \emtex\mfinput\plain.mf plain base + \emtex\mfinput\punct.mf Punctuation Marks for roman/italic fonts + \emtex\mfinput\qtest.mf Font tests + \emtex\mfinput\roman.mf CM Roman + \emtex\mfinput\romand.mf CM Roman (digits) +* \emtex\mfinput\romanl.mf CM Roman (small letters) + \emtex\mfinput\romanp.mf CM Roman (`$', `&', `?') + \emtex\mfinput\romanu.mf CM Roman (large letters) + \emtex\mfinput\romlig.mf CM Roman (ligatures) + \emtex\mfinput\romms.mf CM Math Italic (vertical symbols) + \emtex\mfinput\romspl.mf CM Roman (special symbols) + \emtex\mfinput\romspu.mf CM Roman (special symbols) + \emtex\mfinput\romsub.mf CM Roman (special symbols) + \emtex\mfinput\rtest.mf Font tests + \emtex\mfinput\slant.mf Create slant font + \emtex\mfinput\sroman.mf SliTeX Roman + \emtex\mfinput\sromanu.mf SliTeX Roman (large letters) + \emtex\mfinput\stest.mf Font tests + \emtex\mfinput\sym.mf Symbols +* \emtex\mfinput\symbol.mf Symbols for Mathematical fonts + \emtex\mfinput\texset.mf CM TeX extended ASCII characters + \emtex\mfinput\textit.mf CM Text italic + \emtex\mfinput\title.mf Large letters and digits (for cminch) + \emtex\mfinput\tset.mf Special symbols for cmtex#-fonts + \emtex\mfinput\tsetsl.mf Special symbols for cmtex#-fonts + \emtex\mfinput\ttest.mf Font tests + \emtex\mfinput\waits.mf local.mf as used at WAITS + \emtex\mfinput\xtest.mf Font tests + \emtex\mfinput\ztest.mf Font tests + +* \emtex\texinput\testfont.tex Test text for a font + ++ \emtex\remove\mf.rem Package contents listing for `remove' + + +MFWARE package +-------------- + ++ \emtex\doc\english\mfjob.doc Instructions for MFjob (English) +* \emtex\doc\german\mfjob.doc Instructions for MFjob (German) + +* \emtex\chtopx.exe Conversion program .chr -> .pxl +* \emtex\gftodvi.exe Create METAFONT proof sheets +* \emtex\gftopk.exe Conversion program .#gf -> .pk +* \emtex\gftopxl.exe Conversion program .#gf -> .pxl +* \emtex\gftype.exe List .#gf-files +* \emtex\mft.exe Format METAFONT source text +* \emtex\pktogf.exe Conversion program .pk -> .gf +* \emtex\pktopx.exe Conversion program .pk -> .pxl +* \emtex\pktype.exe List .pk files +* \emtex\pxtoch.exe Conversion program .pxl -> .chr +* \emtex\pxtopk.exe Conversion program .pxl -> .pk +* \emtex\mfjob.exe MFjob program +* \emtex\mfjob1.ovl MFjob program (overlay) +* \emtex\mfjob2.ovl MFjob program (overlay) + +* \emtex\mfjob\all.mfj MFjob file: standard fonts +* \emtex\mfjob\latex.mfj MFjob file: cmcsc10 for LaTeX +* \emtex\mfjob\modes.mfj MFjob file: Include file for *.mfj +* \emtex\mfjob\gftodvi.mfj MFjob file: black, gray, and slant fonts ++ \emtex\mfjob\slitex.mfj MFjob file: SliTeX fonts ++ \emtex\mfjob\texbook.mfj MFjob file: Fonts for The TeXbook ++ \emtex\mfjob\amsfonts.mfj MFjob file: AMSFonts 2.0 (complete). ++ \emtex\mfjob\cyrillic.mfj MFjob file: AMSFonts 2.0 (Cyrillic). ++ \emtex\mfjob\euler.mfj MFjob file: AMSFonts 2.0 (Euler fonts). ++ \emtex\mfjob\extracm.mfj MFjob file: AMSFonts 2.0 (extracm). ++ \emtex\mfjob\symbols.mfj MFjob file: AMSFonts 2.0 (symbol fonts). + + \emtex\mfinput\cmbase.mft MFT style file for cm METAFONT base + \emtex\mfinput\e.mft MFT style file `Computer Modern Typefaces' + \emtex\mfinput\plain.mft MFT style file for plain METAFONT base + \emtex\mfinput\graylj.mf Gray font for HP LaserJet+ + \emtex\mfinput\grayfx.mf Gray font for EPSON FX-80 + \emtex\mfinput\blacklj.mf Black font for HP LaserJet+ + \emtex\mfinput\blackfx.mf Black font for EPSON FX-80 + \emtex\mfinput\slantlj.mf Slant font for HP LaserJet+ + \emtex\mfinput\slantfx.mf Slant font for EPSON FX-80 + +* \emtex\texinput\mftmac.tex Macros for TeX and MFT + + \emtex\tfm\graylj.tfm Gray font for HP LaserJet+ + \emtex\tfm\grayfx.tfm Gray font for EPSON FX-80 + \emtex\tfm\blacklj.tfm Black font for HP LaserJet+ + \emtex\tfm\blackfx.tfm Black font for EPSON FX-80 + \emtex\tfm\slantlj.tfm Slant font for HP LaserJet+ + \emtex\tfm\slantfx.tfm Slant font for EPSON FX-80 + ++ \emtex\remove\mfware.rem Package contents listing for `remove' + + +MISC_MF package +--------------- + +* \emtex\mfinput\cmman.mf Variants of CM for the TeX/METAFONT manuals + \emtex\mfinput\life.mf Examples from the METAFONTbook +* \emtex\mfinput\manfnt.mf Special font for the TeX/METAFONT manuals + \emtex\mfinput\mfman.mf Most of the figures for The METAFONTbook + ++ \emtex\remove\misc_mf.rem Package contents listing for `remove' + + +PICTEX package +-------------- + +* \emtex\texinput\latexpic.tex LaTeX objects for PiCTeX under plain TeX + \emtex\texinput\pictex.tex Main PiCTeX file + \emtex\texinput\postpict.tex PiCTeX under LaTeX + \emtex\texinput\prepicte.tex PiCTeX under LaTeX + ++ \emtex\remove\pictex.rem Package contents listing for `remove' + + +PKEDIT package +-------------- + ++ \emtex\doc\english\pkedit.doc Instructions for pkedit (English) +* \emtex\doc\german\pkedit.doc Instructions for pkedit (German) + +* \emtex\pkedit.exe pkedit program + ++ \emtex\remove\pkedit.rem Package contents listing for `remove' + + +TEX package +----------- + ++ \emtex\doc\english\texware.doc Brief instructions for TeX etc. (English) +* \emtex\doc\german\texware.doc Brief instructions for TeX etc. (German) ++ \emtex\doc\english\emtex.dvi Instructions for emTeX (English) +* \emtex\doc\german\emtex.dvi Instructions for emTeX (German) + +* \emtex\tex.exe TeX (DOS, OS/2 real mode) +* \emtex\tex286.exe TeX (DOS, OS/2 real mode, 80286 CPU) +* \emtex\texp.exe TeX (OS/2 protected mode) +* \emtex\set-tex.bat Set environment variables +* \emtex\set-tex.cmd Set environment variables + +* \emtex\texfmts\fmt.bat Create fmt files +* \emtex\texfmts\fmt.cmd Create fmt files +* \emtex\texfmts\plain.fmt plain TeX (American hyphenation) +* \emtex\texfmts\plain.log log file of plain.fmt +* \emtex\texfmts\tex.poo Pool file (string list) for INITeX + ++ \emtex\texinput\850_tex.tcp Convert code page 850 to TeX commands +* \emtex\texinput\hyphen.tex American hyphenation patterns + \emtex\texinput\fntbl.tex Typeset a font table +* \emtex\texinput\plain.tex plain TeX ++ \emtex\texinput\3.tex Use old formats with TeX 3.0 + + \emtex\tfm\cmb10.tfm CM Bold Roman 10pt + \emtex\tfm\cmbsy10.tfm CM Bold Math Symbols 10pt + \emtex\tfm\cmbx10.tfm CM Bold Extended Roman 10pt + \emtex\tfm\cmbx12.tfm CM Bold Extended Roman 12pt + \emtex\tfm\cmbx5.tfm CM Bold Extended Roman 5pt + \emtex\tfm\cmbx6.tfm CM Bold Extended Roman 6pt + \emtex\tfm\cmbx7.tfm CM Bold Extended Roman 7pt + \emtex\tfm\cmbx8.tfm CM Bold Extended Roman 8pt + \emtex\tfm\cmbx9.tfm CM Bold Extended Roman 9pt + \emtex\tfm\cmbxsl10.tfm CM Bold Extended Slanted Roman 10pt + \emtex\tfm\cmbxti10.tfm CM Bold Extended Text Italic 10pt + \emtex\tfm\cmcsc10.tfm CM Roman Caps and Small Caps 10pt + \emtex\tfm\cmdunh10.tfm CM Dunhill Roman 10pt + \emtex\tfm\cmex10.tfm CM Math Extension 10pt + \emtex\tfm\cmex9.tfm CM Math Extension 9pt + \emtex\tfm\cmff10.tfm CM Funny Roman 10pt + \emtex\tfm\cmfi10.tfm CM Funny Italic 10pt + \emtex\tfm\cmfib8.tfm CM Roman Fibonacci Font 10pt + \emtex\tfm\cminch.tfm CM Inch-High Sans Serif Bold Ext. Caps & Dig + \emtex\tfm\cmitt10.tfm CM Italic Typewriter Text (10pt) + \emtex\tfm\cmmi10.tfm CM Math Italic 10pt + \emtex\tfm\cmmi12.tfm CM Math Italic 12pt + \emtex\tfm\cmmi5.tfm CM Math Italic 5pt + \emtex\tfm\cmmi6.tfm CM Math Italic 6pt + \emtex\tfm\cmmi7.tfm CM Math Italic 7pt + \emtex\tfm\cmmi8.tfm CM Math Italic 8pt + \emtex\tfm\cmmi9.tfm CM Math Italic 9pt + \emtex\tfm\cmmib10.tfm CM Math Italic Bold 10pt + \emtex\tfm\cmr10.tfm CM Roman 10pt + \emtex\tfm\cmr12.tfm CM Roman 12pt + \emtex\tfm\cmr17.tfm CM Roman 17pt + \emtex\tfm\cmr5.tfm CM Roman 5pt + \emtex\tfm\cmr6.tfm CM Roman 6pt + \emtex\tfm\cmr7.tfm CM Roman 7pt + \emtex\tfm\cmr8.tfm CM Roman 8pt + \emtex\tfm\cmr9.tfm CM Roman 9pt + \emtex\tfm\cmsl10.tfm CM Slanted Roman 10pt + \emtex\tfm\cmsl12.tfm CM Slanted Roman 12pt + \emtex\tfm\cmsl8.tfm CM Slanted Roman 8pt + \emtex\tfm\cmsl9.tfm CM Slanted Roman 9pt + \emtex\tfm\cmsltt10.tfm CM Slanted Typewriter Text (10pt) + \emtex\tfm\cmss10.tfm CM Sans Serif 10pt + \emtex\tfm\cmss12.tfm CM Sans Serif 12pt + \emtex\tfm\cmss17.tfm CM Sans Serif 17pt + \emtex\tfm\cmss8.tfm CM Sans Serif 8pt + \emtex\tfm\cmss9.tfm CM Sans Serif 9pt + \emtex\tfm\cmssbx10.tfm CM Sans Serif Bold Extended 10pt + \emtex\tfm\cmssdc10.tfm CM Sans Serif Demibold Condensed 10pt + \emtex\tfm\cmssi10.tfm CM Slanted Sans Serif 10pt + \emtex\tfm\cmssi12.tfm CM Slanted Sans Serif 12pt + \emtex\tfm\cmssi17.tfm CM Slanted Sans Serif 17pt + \emtex\tfm\cmssi8.tfm CM Slanted Sans Serif 8pt + \emtex\tfm\cmssi9.tfm CM Slanted Sans Serif 9pt + \emtex\tfm\cmssq8.tfm CM Sans Serif Quotation Style 8pt + \emtex\tfm\cmssqi8.tfm CM Sans Serif Quotation Style Slanted 8pt + \emtex\tfm\cmsy10.tfm CM Math Symbols 10pt + \emtex\tfm\cmsy5.tfm CM Math Symbols 5pt + \emtex\tfm\cmsy6.tfm CM Math Symbols 6pt + \emtex\tfm\cmsy7.tfm CM Math Symbols 7pt + \emtex\tfm\cmsy8.tfm CM Math Symbols 8pt + \emtex\tfm\cmsy9.tfm CM Math Symbols 9pt + \emtex\tfm\cmtcsc10.tfm CM Typewriter Caps and Small Caps (10pt) + \emtex\tfm\cmtex10.tfm CM TeX Extended ASCII characters (10pt) + \emtex\tfm\cmtex8.tfm CM TeX Extended ASCII characters (8pt) + \emtex\tfm\cmtex9.tfm CM TeX Extended ASCII characters (9pt) + \emtex\tfm\cmti10.tfm CM Text Italic 10pt + \emtex\tfm\cmti12.tfm CM Text Italic 12pt + \emtex\tfm\cmti7.tfm CM Text Italic 7pt + \emtex\tfm\cmti8.tfm CM Text Italic 8pt + \emtex\tfm\cmti9.tfm CM Text Italic 9pt + \emtex\tfm\cmtt10.tfm CM Typewriter Text (10pt) + \emtex\tfm\cmtt12.tfm CM Typewriter Text (12pt) + \emtex\tfm\cmtt8.tfm CM Typewriter Text (8pt) + \emtex\tfm\cmtt9.tfm CM Typewriter Text (9pt) + \emtex\tfm\cmu10.tfm CM Unslanted Italic 10pt + \emtex\tfm\cmvtt10.tfm CM Variable-Width Typewriter Text (10pt) + \emtex\tfm\dummy.tfm Empty font + \emtex\tfm\logo10.tfm METAFONT logo 10pt + \emtex\tfm\logo8.tfm METAFONT logo 8pt + \emtex\tfm\logo9.tfm METAFONT logo 9pt + \emtex\tfm\logobf10.tfm Boldface METAFONT logo 10pt + \emtex\tfm\logosl10.tfm Slanted METAFONT logo 10pt +* \emtex\tfm\cmman.tfm Variants of CM for the TeX/METAFONT manuals +* \emtex\tfm\manfnt.tfm Special font for the TeX/METAFONT manuals + ++ \emtex\remove\tex.rem Package contents listing for `remove' + + +TEXCAD package +-------------- + +* \emtex\texcad.exe The TeXcad program +* \emtex\gh.bat Calling editor, LaTeX, TeXcad, and Previewer + \emtex\ask.exe Auxiliary program for gh.bat + \emtex\texcad.opt TeXcad parameters + \emtex\att.bgi Video graphics driver + \emtex\cga.bgi Video graphics driver + \emtex\herc.bgi Video graphics driver + \emtex\egavga.bgi Video graphics driver + \emtex\ibm8514.bgi Video graphics driver + \emtex\pc3270.bgi Video graphics driver + ++ \emtex\doc\english\tcman.dvi TeXcad manual (English) +* \emtex\doc\german\tcman.dvi TeXcad manual (German) ++ \emtex\doc\english\texcad.ver Changes from older versions (English). ++ \emtex\doc\german\texcad.ver Changes from older versions (German). + + \emtex\texinput\emlines.sty Doc. Style Opt.: lines with arbitrary slopes +* \emtex\texinput\emlines2.sty Ditto, cf. tcman.dvi +* \emtex\texinput\gh.tex Testing LaTeX documents and pictures + ++ \emtex\remove\texcad.rem Package contents listing for `remove' + + +TEXWARE package +--------------- + ++ \emtex\doc\english\texchk.doc Instructions for texchk (English) +* \emtex\doc\german\texchk.doc Instructions for texchk (German) + +* \emtex\texchk.exe Syntax checker for LaTeX +* \emtex\texconv.exe Text conversion (ae -> \"a etc.) ++ \emtex\maketcp.exe Create tcp files +* \emtex\dvitype.exe List a dvi file +* \emtex\pltotf.exe Conversion program .pl -> .tfm +* \emtex\tftopl.exe Conversion program .tfm -> .pl ++ \emtex\vftovp.exe Conversion program .vf & .tfm -> .vpl ++ \emtex\vptovf.exe Conversion program .vpl -> .vf & .tfm + ++ \emtex\remove\texware.rem Package contents listing for `remove' + + +WEB package +----------- + +* \emtex\doc\web.doc Brief instructions for the WEB programs + +* \emtex\weave.exe WEAVE (.web -> .tex) +* \emtex\tangle.exe TANGLE (.web -> .pas) +* \emtex\pooltype.exe List a pool file + +* \emtex\texinput\webmac.tex Macros for TeX and WEAVE +* \emtex\texinput\webman.tex Manual for the WEB system. + ++ \emtex\remove\web.rem Package contents listing for `remove' + + +Fonts +----- + +See the section `Further diskettes' for a listing of the devices for +which fonts can be generated. + +The fonts will be generated in the following magnifications: + + \magstep0 (scaled 1000) + \magstephalf (scaled 1095) + \magstep1 (scaled 1200) + \magstep2 (scaled 1440) + \magstep3 (scaled 1728) + \magstep4 (scaled 2074) + \magstep5 (scaled 2488) + +In each magnification there are the following fonts: + + cmr5 cmr6 cmr7 cmr8 cmr9 cmr10 cmr12 cmr17 + cmbx5 cmbx6 cmbx7 cmbx8 cmbx9 cmbx10 cmbx12 + cmmi5 cmmi6 cmmi7 cmmi8 cmmi9 cmmi10 cmmi12 + cmsy5 cmsy6 cmsy7 cmsy8 cmsy9 cmsy10 + lasy5 lasy6 lasy7 lasy8 lasy9 lasy10 + emsy5 emsy6 emsy7 emsy8 emsy9 emsy10 + cmti7 cmti8 cmti9 cmti10 cmti12 + cmss8 cmss9 cmss10 cmss12 cmss17 + cmssi8 cmssi9 cmssi10 cmssi12 cmssi17 + cmsl8 cmsl9 cmsl10 cmsl12 + cmtt8 cmtt9 cmtt10 (cmtt12) + cmtex8 cmtex9 cmtex10 + logo8 logo9 logo10 + cmex9 cmex10 + + cmcsc10 cmtcsc10 lasyb10 logobf10 logosl10 cmdunh10 cmssq8 cmssqi8 + cmssbx10 cmssdc10 cmbxti10 cmbxsl10 cmitt10 cmsltt10 cmvtt10 cmmib10 + cmbsy10 cmb10 cmfi10 cmff10 cmu10 cmfib8 cminch lcmss8 lcmssb8 + lcmssi8 line10 linew10 lcircle1 (=lcircle10) lcirclew (=lcirclew10) + +In each `magnification' scaled 800 and scaled 900 one has the font: + + cmcsc10 + +Big fonts for SliTeX are packaged in a separate font library file +(lj_sli.fli, for example): + + "\magstep6" (scaled 2986) + "\magstep7" (scaled 3583) + "\magstep8" (scaled 4300) + + lcmss8 lcmssi8 lcmssb8 cmmi8 cmsy8 cmtt8 lasy8 + + "\magstep9" (scaled 5160) + + lcmss8 + +The font cmtt12 is missing for some devices in some magnifications (this +is taken into account in lfonts.tex). + +You don't need separate fonts for the screen previewers, as you can use +the printer fonts. + + +------------------------------------------------------------------------------ +License +------------------------------------------------------------------------------ + +emTeX may only be distributed in UNCHANGED and COMPLETE form (all zip +files, readme.eng and readme.ger!), and only when this is done WITHOUT +CHARGE. If you want to distribute only parts of emTeX or if you want +to charge a small fee for handling etc., you have to contact the author. + +Please observe the license conditions for pkzip/pkunzip +(see manual.doc in pkz102.exe)! + +Please observe the directions in \emtex\texinput\ghyphen.min and +\emtex\texinput\ghyphen.max! + +Please observe the directions in \emtex\doc\makeindx.cpy (see also +\emtex\doc\english\texware.doc and \emtex\doc\german\texware.doc)! + +TeXcad is Shareware. Please observe the directions in +\emtex\doc\english\tcman.dvi! + +No guarantee is made as to the proper functioning of the programs. +No liability will be admitted for damage resulting from using the +programs. + +Instead of a list: All the trademarks used in this document and all +the other emTeX documents are registered to whoever it is that owns them. + + +------------------------------------------------------------------------------ +How do I get emTeX? +------------------------------------------------------------------------------ + +- You can get emTeX at some University computing centers. + +- Ask your friends, etc. + +- Ask your local TeX users group. + +- Anonymous ftp: + + ftp.uni-stuttgart.de [129.69.1.12] soft/tex/machines/pc/emtex + ymir.claremont.edu [134.173.4.23] [anonymous.tex.ibm_pc.emtex] + archive.cs.ruu.nl [131.211.80.5] TEX/emtex + utsun.s.u-tokyo.ac.jp [133.11.11.11] TeX/emtex + ponder.csci.unt.edu [129.120.3.16] pub/TeX/EmTeX + +- Mail server: + + mail-server@cs.ruu.nl + mail-server@rusinfo.rus.uni-stuttgart + texserver@uk.ac.tex (UK) + texserver@tex.ac.uk (outside UK) + +- Ask the one from whom you got this text. As this text is distributed + by the author only with the complete emTeX, you should be able to + trace back this text to a complete emTeX. + +- If there is no other way to get emTeX (which is impossible, as proved + above), you can try to send formatted diskettes in sufficient number + (5.25 inch, 1200 KB, high density or 3.5 inch, 1440 KB, high density; + see above; include a spare diskette), return postage, and a suitable + self-addressed package, to the author (see below). Also indicate the + fonts desired (i.e. printer type and resolution). You can save the + author from unpleasant work by using MFjob (which comes with emTeX) + for generating fonts. + + Shipping at your risk. You also run the risk of having your address + given to (a few) other people in your vicinity who want a copy of emTeX. + + +------------------------------------------------------------------------------ +The author +------------------------------------------------------------------------------ + +Address: + + Eberhard Mattes + Teckstrasse 81 (Teckstra\ss e) + D-7141 Moeglingen (M\"oglingen) + Federal Republic of Germany + +Questions only by mail! No telephone calls please! +Please inclose a self-addressed return package with postage if +you expect a response. Read help.eng first! + +Electronic mail (subject to sudden change): + + Internet: mattes@azu.informatik.uni-stuttgart.de + +If you want support by telephone, obtain a commercial TeX package. + +Frequently asked questions (and answers) will be found in help.eng and +help.ger. + + +------------------------------------------------------------------------------ +Reporting bugs +------------------------------------------------------------------------------ + +If you find a bug please tell the author so that it can be corrected. Please +send the following information which is needed for the task: + +- machine type (XT, AT, 386 &c.), CPU, BIOS, video card, printer + (manufacturer and model), operating system and version number + (note: SYSLEVEL command with OS/2). For instance: + AT compatible, 286, Award, Paradise VGA, DeskJet+, IBM PC-DOS 3.3 . + +- the text of the autoexec.bat and config.sys in use when the error + occurred: if possible, with an explanation of the programs called and + drivers installed that are not part of the operating system. + +- emTeX version (date of issue, see head of readme.eng) + +- enough information for the error to be reproduced, if possible a disk + (5.25" or 3.5") containing the appropriate files (see also dvidrv.doc). + +- the dvidrv log file, if the error is in a driver + +- the part of the printed output which shows the error, if the error is in + a printer driver. + +Please inclose a self-addressed return package with postage if +you expect a response. + + +------------------------------------------------------------------------------ +Changes from earlier versions (with regard to the installation) +------------------------------------------------------------------------------ + +16-Oct-1989 +----------- + + MFWARE: The .exe files were moved from the directory \emtex\mfjob + to the directory \emtex. Please delete old .exe files in + \emtex\mfjob. For further changes see mfjob.doc. + + +06-Nov-1989 +----------- + + TEX: tex286.exe new. + ehyphen.tex renamed to ahyphen.tex. + dhyphen.tex renamed to ghyphen.tex. + In case you use your own .fmt files, these should be made + over. + + DVIDRV: `view' renamed to `v'. + Names of the environment variables changed (see *.cnf). + Batch and configuration files changed. + + DVIDRVMA: dvitrans.* removed, graphic files now supplied. + + BIBTEX: ieeetr.bst and sample.bst removed (please delete). + + MF: Following files removed (delete in \emtex\mfinput!): + + grdov.mf, grdov5.mf, gresp.mf, gresp5.mf, gray.mf, black.mf, + lgresp.mf, sldov6.mf, slaps4.mf, imhalf.mf, aphalf.mf, + ddhalf.mf, blaps.mf, bldov.mf, blesp.mf, oneone.mf. + + mf286.exe new. + + In case you use your own .bas files, these have to be redone, + since mf.poo has been changed. + + MISC_MF: The file \emtex\mfinput\trap.mf was removed (delete!). + + TEXWARE: Contains now the former package TEX_UTIL. + + MISC_TEX: Does not exist anymore. + + +12-Feb-1990 +----------- + + BTEX New. + BLATEX New. + MAKEINDX New. + DVIDOT New (preliminary version, will be delivered later with + DVIDRV). + + Fonts: + Additional fonts (needed for LaTeX): + + cmcsc10 scaled 800; cmcsc10 scaled 900. + + fli files renamed (hp_* -> lj_*). IF YOU ALREADY ARE USING + + hp_*.fli-files: PLEASE RENAME. + + Fonts renamed: + + grayhp -> graylj, blackhp -> blacklj and slanthp -> slantlj + + Fonts renamed: + + grayeps -> grayfx, blackeps -> blackfx and slanteps -> slantfx + + Additional Fonts in lj_1500: + + graylj, blacklj, slantlj + + Additional Fonts in fx_1200: + + grayfx, blackfx, slantfx + + +21-Feb-1990 +----------- + + From now on all changes are documented in CHANGES.DOC. + Changes that concern installation are also entered here. + + BMF New. + + +08-Aug-1990 +----------- + + GTEX: New. (Taken out of the TEX package.) + GLATEX: New. (Taken out of the LATEX package.) + GBTEX: New. (Taken out of the BTEX package.) + GBLATEX: New. (Taken out of the BLATEX package.) + + TEXCAD New. + + DVIDOT: Now to be found in the DVIDRV package. There is no longer an + \emtex\doc\dvidot.doc, please delete it. + + DVIDRV: The old dot matrix drivers have been replaced by dvidot: + dvifx, dviitoh, dviaiw, dvip6l, dvip6m, dvip6h have been + removed. + + DVIDRV: .cnf- .bat- and .cmd files changed. If you have made your own + alterations to these file, you should alter the new files + appropriately. + + The `manual' font has been renamed `manfnt' (this is the standard name). + You should delete \emtex\tfm\manual.tfm and \emtex\mfinput\manual.mf. + + ghyphen.min and ghyphen.max have replaced ghyphen.tex (which was out of + date). Please delete ghyphen.tex. + + ahyphen.tex has again been changed to hyphen.tex (it will stay like that + now). Please delete ahyphen.tex. + + The program remove can be used to remove the files making up a package + from the installed system. + + bglatex.cmd and bglatex.bat have been renamed gblatex.cmd and gblatex.bat + respecitvely. Please delete bglatex.cmd and bglatex.bat. + + MFWARE: mfjob1.exe and mfjob2.exe have been renamed mfjob1.ovl and + mfjob2.ovl; please delete mfjob1.exe and mfjob2.exe. + + GLATEX: no longer contains modified sty files, as the LATEX package now + contains ILaTeX. Please delete all files from the + \emtex\texinput\german directory and change the environment + variable TEXINPUT appropriately. + + LATEX: latex.dif no longer there; doc files are now in the LATEXDOC + package. + + LATEXDOC: New. + + Documentation in English, as far as is available, will be found in the \ + emtex\doc\english directory. German documentation is to be found in + \emtex\doc\german. If a document is available in only one language, it + will be found in \emtex\doc. + + Frequently asked questions (and answers) will be found in help.eng and + help.ger. + + Now both German and English versions of changes.doc: changes.ger and + changes.eng. Changes amde in earlier versions are detailed in changes.pre. + + delete: ***ATTENTION***: meaning of -n option changed! + + +20-Aug-1990 +----------- + + cmman.tfm and manfnt.tfm moved from MISC_MF package to TEX package. + + +25-Sep-1990 +----------- + + The file format of font library files has changed. If you own font library + files of an old emTeX distribution, the fli files must be converted to the + new format. First, copy the complete new DVIDRV package onto your disk. + Then, change to the directory containing the fli files and start the batch + file newfonts, giving the path name of the file `fontlist' as argument + (\emtex\fontlist with the correct drive). Example (fonts in c:\texfonts, + emTeX on disk D): + + c: + cd \texfonts + newfonts d:\emtex\fontlist + + 1200 KB of disk space must be available. + + The fonts circle10 and circlew10 have been renamed lcircle10 (lcircle1) + and lcirclew10 (lcirclew). Please delete the files + + \emtex\tfm\circle10.tfm + \emtex\tfm\circlew1.tfm + + These fonts were also renamed in the font libarary files. If you're + using old dvi files with new fonts, you have to use the font substitution + file newfonts.sub (/ps=c:\emtex\newfonts). If you're using new dvi files + with old fonts, you have to use the font substitution file oldfonts.sub + (/ps=c:\emtex\oldfonts). + + If you have fonts in directories named like \emtex\pixel.fx\pxl$s, + you should rename these directories \emtex\pixel.fx\$rdpi, replacing + $r with $s/5 (rounded). Example: + + \emtex\pixel.lj\pxl1800 --> \emtex\pixel.lj\360dpi + + +02-Jul-1991 +----------- + + DVIDRVMA: dvidrv.dvi (German version) moved from \emtex\doc to + \emtex\doc\german. Please delete \emtex\doc\dvidrv.dvi. + + +06-Oct-1991 +----------- + + TEX: emtex.dvi (German version) moved from \emtex\doc to + \emtex\doc\german. Please delete \emtex\doc\emtex.dvi. + + +10-Jun-1992 +----------- + + New LaTeX version. The following ZIP files have been changed: + + BLATEX.ZIP BTEX2.ZIP GBLATEX.ZIP GBTEX.ZIP + GLATEX.ZIP GTEX.ZIP LATEX1.ZIP LATEX2.ZIP + LATEXDOC.ZIP MAKEINDX.ZIP TEX2.ZIP + + +23-Jun-1992 +----------- + + Bugs fixed, new MakeIndex version. The following ZIP files have been + changed: + + BLATEX.ZIP GBLATEX.ZIP GLATEX.ZIP + LATEX2.ZIP MAKEINDX.ZIP + + Known bug: \righthyphenmin is not set to 2 when generating plaing.fmt. + + -------- End of README.ENG ------------- -- cgit v1.2.3