summaryrefslogtreecommitdiff
path: root/macros/latex/contrib/seminar/doc
diff options
context:
space:
mode:
authorNorbert Preining <norbert@preining.info>2021-06-26 03:00:56 +0000
committerNorbert Preining <norbert@preining.info>2021-06-26 03:00:56 +0000
commit3d1055e1e00548f29b9d4ba0a79c717b9b6b2ae3 (patch)
tree81d89c6859163c396aa9344ddb05c271e9ab760c /macros/latex/contrib/seminar/doc
parent644c44d0c55a2960e53623b0c19448c1b8015d1e (diff)
CTAN sync 202106260300
Diffstat (limited to 'macros/latex/contrib/seminar/doc')
-rwxr-xr-xmacros/latex/contrib/seminar/doc/run.sh8
-rw-r--r--macros/latex/contrib/seminar/doc/seminar-doc.pdfbin251653 -> 0 bytes
-rw-r--r--macros/latex/contrib/seminar/doc/seminar-doc.tex1932
-rw-r--r--macros/latex/contrib/seminar/doc/semsamp1.pdfbin31355 -> 0 bytes
-rw-r--r--macros/latex/contrib/seminar/doc/semsamp1.tex110
-rw-r--r--macros/latex/contrib/seminar/doc/semsamp2.pdfbin44373 -> 0 bytes
-rw-r--r--macros/latex/contrib/seminar/doc/semsamp2.tex297
-rw-r--r--macros/latex/contrib/seminar/doc/semsamp3.pdfbin38948 -> 0 bytes
-rw-r--r--macros/latex/contrib/seminar/doc/semsamp3.tex68
-rw-r--r--macros/latex/contrib/seminar/doc/tvz-code.sty291
-rw-r--r--macros/latex/contrib/seminar/doc/tvz-hax.sty266
-rw-r--r--macros/latex/contrib/seminar/doc/tvz-user.sty215
12 files changed, 0 insertions, 3187 deletions
diff --git a/macros/latex/contrib/seminar/doc/run.sh b/macros/latex/contrib/seminar/doc/run.sh
deleted file mode 100755
index 0ca093e020..0000000000
--- a/macros/latex/contrib/seminar/doc/run.sh
+++ /dev/null
@@ -1,8 +0,0 @@
-#!/bin/bash
-#latex semsamp1 && dvips -T 297mm,210mm semsamp1 && ps2pdf semsamp1.ps
-latex semsamp1 && dvips semsamp1 && ps2pdf semsamp1.ps
-latex semsamp2 && dvips -T 297mm,210mm semsamp2 && ps2pdf semsamp2.ps
-latex semsamp3 && dvips -T 297mm,210mm semsamp3 && ps2pdf semsamp3.ps
-rm *.log *.aux *.dvi *.ps *.tmp *.out *.los
-
-
diff --git a/macros/latex/contrib/seminar/doc/seminar-doc.pdf b/macros/latex/contrib/seminar/doc/seminar-doc.pdf
deleted file mode 100644
index 2227746eae..0000000000
--- a/macros/latex/contrib/seminar/doc/seminar-doc.pdf
+++ /dev/null
Binary files differ
diff --git a/macros/latex/contrib/seminar/doc/seminar-doc.tex b/macros/latex/contrib/seminar/doc/seminar-doc.tex
deleted file mode 100644
index 94aef0b7f0..0000000000
--- a/macros/latex/contrib/seminar/doc/seminar-doc.tex
+++ /dev/null
@@ -1,1932 +0,0 @@
-%% BEGIN sem-user.tex
-\def\FileDate{93/04/01}
-\def\FileVersion{1.0}
-%%
-%% COPYRIGHT 1993, by Timothy Van Zandt, Timothy.VAN-ZANDT@insead.edu
-%%
-%%
-%% This file may be distributed and/or modified under the conditions of
-%% the LaTeX Project Public License, either version 1.2 of this license
-%% or (at your option) any later version. The latest version of this
-%% license is in:
-%%
-%% http://www.latex-project.org/lppl.txt
-%%
-%% and version 1.2 or later is part of all distributions of LaTeX version
-%% 1999/12/01 or later.
-%%
-%%
-%%
-%% This LaTeX file prints the User's Guide for seminar.sty.
-%% You must have my tvz-hax.sty, tvz-user.sty, and fancybox.sty,
-%% which are distributed with seminar.sty.
-%%
-%% This is distributed with the index file sem-user.ind.
-%% To make an new index, run, e.g.:
-%% makeindex sem-user.idx
-%%
-%% STYLE OPTIONS:
-%% `a4' : For A4 paper.
-%% `twoside' : For two-sided printing.
-%% `2up' : For two-up printing. (Uses non-standard font magnifications.
-%% See 2up.doc for details.)
-%%
-
-\documentstyle[12pt]{tvz-user}
-
-\makeindex
-
-% Used with twoside option:
-\def\theheadertitle{seminar.sty: User's Guide}
-
-% No headers, 1in top margin
-\setlength{\topmargin}{0pt}
-\setlength{\headheight}{0pt}
-\setlength{\headsep}{0pt}
-\setlength{\textheight}{8.75in}
-\setlength{\footskip}{.625in}
-\papersizeadjust
-
-% Change part environment:
-\renewcommand{\part}[1]{%
- \clearpage
- \refstepcounter{part}
- \addcontentsline{toc}{part}{\protect\numberline{\thepart}#1}%
- \hrule height 1pt\relax
- \vskip 1ex
- \hbox to\columnwidth{\strut\huge\bf\thepart\hfil#1}%
- \vskip 1ex
- \hrule height 1pt\relax
- \vskip 3ex}
-
-\def\MainFont{\tt} % For macro definitions.
-
-\ShortVerb
-\ShortMeta
-
-\let\filedate\FileDate
-
-\begin{document}
-
-\thispagestyle{empty}
-
-\null
-\vfill
-
-\begin{center}
- {\huge\bf seminar.sty}\\[9pt]
- {\LARGE\bf A \bLaTeX\ style for slides and notes}\\[14pt]
- {\LARGE\bf User's Guide}\par
- \vskip 1.5em
- \large
- \renewcommand{\thefootnote}{\fnsymbol{footnote}}
- Timothy Van Zandt\\
- {\normalsize\tt Timothy.VAN-ZANDT@insead.edu}
- \vskip 1em
- \thefiledate\\ Version \FileVersion\par
-\end{center}
-\par
-\setlength{\unitlength}{1cm}
-\thicklines
-\centerline{\lower.8in\hbox{%
-\begin{picture}(0,0)
-\put(2,-11){\framebox(4,2){}}
-\put(2,-11){\line(-2,3){1}}
-\put(2,-9){\line(-2,3){1}}
-\put(6,-9){\line(-2,3){1}}
-\put(1,-9.5){\line(0,1){2}}
-\put(1,-7.5){\line(1,0){4}}
-\put(5.8,-8.7){\line(0,1){2}}
-\put(5.0,-6.7){\oval(1.6,1.6)[tr]}
-\put(5.0,-5.9){\line(-1,0){.7}}
-\put(3.1,-6.4){\framebox(1.2,1){}}
-\put(3.1,-6.4){\line(-1,2){.3}}
-\put(3.1,-5.4){\line(-1,3){.3}}
-\put(4.3,-5.4){\line(-1,3){.3}}
-\put(2.8,-5.8){\line(0,1){1.3}}
-\put(2.8,-4.5){\line(1,0){1.2}}
-\put(0,6.2){\oval(14,10)}
-\put(.02,6.18){\oval(14,10)}
-\thinlines
-\put(2.8,-5.8){\line(-4,3){9.6}}
-\put(2.8,-4.5){\line(-3,5){9.35}}
-\put(4,-4.5){\line(1,6){2.6}}
-\put(6.8,1.4){\line(-1,-3){2.5}}
-\end{picture}}}
-\par
-\bigskip
-\rightskip=0pt plus 2em\relax
-\parshape=20
-0cm 2.3cm
-0cm 2.9cm
-0cm 3.5cm
-0cm 4.1cm
-0cm 4.7cm
-0cm 5.3cm
-0cm 5.9cm
-0cm 6.5cm
-0cm 7.1cm
-0cm 7.7cm
-0cm 8.3cm
-0cm 8.3cm
-0cm 8.3cm
-0cm 7.3cm
-0cm 7.3cm
-0cm 7.3cm
-0cm 7.3cm
-0cm 7.3cm
-0cm 7.3cm
-0cm 7.3cm
-seminar.sty is a \LaTeX\ style for typesetting slides or
-transparencies, and accompanying notes. Here are some of its special features:
-It is compatible with \AmS-\LaTeX, and you can use PostScript and \AmS{}
-fonts. Slides can be landscape and portrait. There is support for color and
-frames. The magnification can be changed easily.
-Overlays can be produced from a single slide environment. Accompanying notes,
-such as the text of a presentation, can be put
- outside the slide environments. The slides, notes or both together
- can then be typeset in a variety of formats.
-
-\vfill
-
-\twosideclearpage
-\pagenumbering{roman}
-\tableofcontents
-
-\twosideclearpage
-
-\section*{Getting Started}
-\addcontentsline{toc}{section}{Getting Started}
-\markboth{Getting Started}{Getting Started}
-
-"seminar.sty" is a \LaTeX{} document style for typesetting slides, and more.
-
-You should know how to use \LaTeX, as described in Leslie Lamport's \LaTeX:
-{\em User's Guide and Reference Manual}.
-
-Let's get started:
-\begin{enumerate}
-\item If you are installing "seminar.sty", read the the accompanying read-me
-file, and put the input files where your \TeX\ looks for inputs.
-
-\item Typeset the sample file, "semsamp1.tex", to see that everything is
-working. You can use \LaTeX\ or \AmS-\LaTeX.
-
-\item Read Appendix \ref{short-fonts}, on page \pageref{short-fonts}.
-
-\item To start making landscape slides, use
-\begin{LVerbatim}
- \documentstyle{seminar}
- \begin{document}
- \begin{slide}
- foo
- \end{slide}
- \end{document}
-\end{LVerbatim}
-and print out your document in landscape mode.
-
-\item To start making portrait slides, include the \o{portrait} style option,
-and use the \e{slide*} environment instead of \e{slide}:
-\begin{LVerbatim}
- \documentstyle[portrait]{seminar}
- \begin{document}
- \begin{slide*}
- foo
- \end{slide*}
- \end{document}
-\end{LVerbatim}
-
-\item If you have used \SliTeX, see Section \ref{slitex}.
-
-\item For A4 paper, use the "a4" style option.
-
-\item When you are ready to explore "seminar.sty"'s special features, skim the
-{\em User's Guide}, including the appendices.
-
-\item Play around with the sample file "semsamp2.tex" to try out some of
-"seminar.sty"'s special features.
-
-\item When you run into problems, look for help in Part \ref{Help}.
-
-\end{enumerate}
-
-\twosideclearpage
-
-\pagenumbering{arabic}
-
-\part{Just slides}
-
-\section{Landscape and portrait slides}
-
-"seminar.sty" is a \LaTeX\ (or \AmS-\LaTeX) document style. Thus, begin your
-document with
-\begin{LVerbatim}
- \documentstyle{seminar}
-\end{LVerbatim}
-
-The slide environments are\MainEnvIndex{slide}\MainEnvIndex{slide*}%
-\begin{LVerbatim}
- \begin{slide} ... \end{slide}
- \begin{slide*} ... \end{slide*}
-\end{LVerbatim}
-\e{slide} is for landscape slides and \e{slide*} is for portrait slides.
-
-By default, the document is typeset in landscape mode, but if you include the
-\O{portrait} style option, the document is typeset in portrait mode.
-Typesetting the document in landscape mode is different from printing it in
-landscape mode; you may have to take care of the latter when printing with
-your dvi driver (see Appendix \ref{S-landscape}).
-
-If you have both landscape and portrait slides in your file, there are two
-ways to print the slides:
-\begin{itemize}
- \item If you dvi driver supports rotation, then you can print all the slides
-at once. See Appendix \ref{S-landscape} for details.
- \item You can first print your landscape slides by putting the command
-\begin{MD}
- \landscapeonly
-\end{MD}
-in the preamble, and then print the portrait slides by inserting instead the
-command
-\begin{MD}
- \portraitonly
-\end{MD}
-and including the \o{portrait} style option.
-\end{itemize}
-
-\section{The height and width of slides\label{slidedim}}
-
-The dimensions of the slides are set by the lengths
-\begin{MD}
- \slidewidth\\
- \slideheight
-\end{MD}
-The ``width'' refers to the width of a slide when looking at it in landscape
-orientation, whether it is a landscape or portrait slide (and the same goes
-for ``height''). The default width is 8.5 inches and the default height is 6.3
-inches.
-
-The slide environments have an optional argument that lets you change the
-dimensions of a single slide, as in
-\begin{LVerbatim}
- \begin{slide*}[7.5in,6in]
-\end{LVerbatim}
-The first dimension is the slide's ``width'', and the second dimension is the
-slides ``height''. If you remember what we said about what ``width'' and
-``height'' mean, you will see that the above example begins a portrait slide
-that is 7.5 inches high and 6 inches wide.
-
-
-\section{Margins within a slide}
-
-When a slide is not full, the material is vertically centered within the
-slide. The command
-\begin{MD}
- \centerslidesfalse
-\end{MD}
-cause the material to be flush to the top, instead. The command
-\begin{MD}
- \centerslidestrue
-\end{MD}
-switches back to vertical centering.
-
-The right margin in slides is ragged by default. You can change this with the
-command
-\begin{MD}
- \raggedslides[len]
-\end{MD}
-<len> should be the maximum space between the end of the line and the right
-margin. The argument is optional; \n\raggedslides\ is equivalent to
-\begin{LVerbatim}
- \raggedslides[1fil]
-\end{LVerbatim}
-which gives a ragged right margin, as in \LaTeX's "flushleft" environment (the
-default). On the other hand,
-\begin{LVerbatim}
- \raggedslides[0pt]
-\end{LVerbatim}
-gives a justified margin, and
-\begin{LVerbatim}
- \raggedslides[2em]
-\end{LVerbatim}
-gives a semi-ragged margin. Note that as a margin becomes less ragged,
-hyphenation becomes more likely and more material fits on a slide.
-
-\section{Page breaking within a slide environment\label{S-pagebreak}}
-
-A slide environment can contain more than one ``page'' of slides; \TeX\ will
-break slides into pages automatically.
-
-If the mere idea disturbs you, put the command
-\begin{LVerbatim}
- \extraslideheight{10in}
-\end{LVerbatim}
-in your document. You can then divide slides into pages yourself by starting
-new slide environments or using the
-\begin{MD}
- \newslide
-\end{MD}
-command within a slide environment. And you need read this section no further.
-
-If instead you use the command
-\begin{LVerbatim}
- \extraslideheight{0pt}
-\end{LVerbatim}
-then \TeX\ will break pages the way you would expect. This is a quick and
-dirty way to break a whole paper or a long proof into slides.
-
-However, dividing material into slides is usually too delicate a matter to be
-left up to \TeX, and ultimately you will make all the page breaks yourself. On
-the other hand, automatic page breaking can still be helpful at the early
-stages, letting \TeX\ find preliminary page breaks for you.
-
-Setting the "\extraslideheight" to "0pt" doesn't give you much flexibility
-about where to put the page breaks. Of course, you can always put a page break
-earlier than the one found by \TeX, but occasionally you will prefer to let a
-slide overflow by a small amount rather than rewrite the whole slide.
-
-Therefore, by default, "seminar.sty" uses\MainIndex{\extraslideheight}%
-\begin{LVerbatim}
- \extraslideheight{10pt}
-\end{LVerbatim}
-This adds on an extra "10pt" to the target slide height (as determined by
-"\slideheight" for landscape slides and "\slidewidth" for portrait slides)
-{\em for the purpose of page-breaking only}.
-
-If the resulting slide exceeds the slide height, you will get a message like
-\begin{LVerbatim}
- LaTeX Error: Slide 3 overfull by 9pt.
-\end{LVerbatim}
-"seminar.sty" then tries to reduce the slide to its maximum height by
-squeezing out rubber vertical space (e.g., tightening up the interline
-spacing). If the slide is still too full, you will get another warning like:
-\begin{LVerbatim}
- Overfull \vbox by 4.4pt while output was active.
-\end{LVerbatim}
-You can go back and look for a way to make the slide shorter, or you can
-insert a "\newslide" command to change the page-break, or you can just ignore
-these warnings.
-
-The recommended value to give in the argument of "\extraslideheight" is the
-largest length by which you might be willing to let a slide overflow.
-
-After you have decided on the page breaks, you can shut up the warnings about
-overfull slides and "\vbox"'s with
-\begin{LVerbatim}
- \renewcommand{\slidefuzz}{1in}
-\end{LVerbatim}
-The value of \n\slidefuzz\ (which should be length, even though \n\slidefuzz\
-is an ordinary command sequence) is the threshold above which "seminar.sty"
-gives a warning about an overfull slide. The default definition is "2pt".
-
-
-\section{Margins on the page\label{S-slidemargins}}
-
-After "seminar.sty" makes a slide (or a slide page) as described above, it
-(optionally) frames the slide. This is described in Section \ref{S-frames}.
-For making and framing the slide, "seminar.sty" does not need to know anything
-about the paper you are printing on, or the margins you want. Hence, none of
-\LaTeX's standard page parameters are relevant within a slide environment.
-(However, for the sake of consistency, "seminar.sty" sets "\textwidth" to the
-width of the slide and "\textheight" to the height of the slide within a slide
-environment.)
-
-Now "seminar.sty" has to do something with the finished slide. As you read
-this User's Guide, you will find that there are various options. However,
-right now we are making slides for printing on transparencies, and so we have
-to position the slide on the transparency and add headers and footers.
-"seminar.sty" does not use \LaTeX's page parameters for this either. Instead,
-it uses the following parameters:
-\begin{center}
- \begin{tabular}{lc}
- {\em Parameter:} & \em Default:\\
- \N\slideleftmargin & .5in\\
- \N\sliderightmargin & .5in\\
- \N\slidetopmargin & .5in\\
- \N\slidebottommargin & .5in
- \end{tabular}
-\end{center}
-There are commands, to be set with "\renewcommand".\footnote{The only true
-length parameters (meaning that thay should be set with "\setlength") in
-"seminar.sty" are \n\slidewidth, \n\slideheight, \n\slideframewidth,
-\n\slideframesep, \n\semin, and \n\semcm.}
-
-\begin{figure}
-\hrule height 1pt\relax
-\begin{center}
-\setlength\unitlength{.7cm}
-\begin{picture}(13,11.5)(-1,-1.5)
-\thicklines
-\put(0,0){\framebox(11,8.5){\Huge My slide}}
-\put(5.5,4.25){\fancyoval(8.5,6){}}
-
-\thinlines
-\put(0,8.65){\line(0,1){.3}}
-\put(.75,8.65){\line(0,1){.3}}
-\put(.5,8.8){\vector(1,0){.25}}
-\put(.5,8.8){\vector(-1,0){.5}}
-\put(.375,9.1){\makebox(0,0)[b]{\n\slideleftmargin}}
-
-\put(10.25,8.65){\line(0,1){.3}}
-\put(11,8.65){\line(0,1){.3}}
-\put(10.75,8.8){\vector(1,0){.25}}
-\put(10.75,8.8){\vector(-1,0){.5}}
-\put(10.625,9.1){\makebox(0,0)[b]{\n\sliderightmargin}}
-
-\put(0,-.15){\line(0,-1){.3}}
-\put(11,-.15){\line(0,-1){.3}}
-\put(5.5,-.3){\vector(1,0){5.5}}
-\put(5.5,-.3){\vector(-1,0){5.5}}
-\put(5.5,-.6){\makebox(0,0)[t]{\n\paperheight}}
-
-\put(-.15,0){\line(-1,0){.3}}
-\put(-.15,.75){\line(-1,0){.3}}
-\put(-.3,.5){\vector(0,1){.25}}
-\put(-.3,.5){\vector(0,-1){.5}}
-\put(-.6,.375){\makebox(0,0)[r]{\n\slidebottommargin}}
-
-\put(-.15,8.5){\line(-1,0){.3}}
-\put(-.15,7.75){\line(-1,0){.3}}
-\put(-.3,8){\vector(0,1){.5}}
-\put(-.3,8){\vector(0,-1){.25}}
-\put(-.6,8.125){\makebox(0,0)[r]{\n\slidetopmargin}}
-
-\put(11.15,0){\line(1,0){.3}}
-\put(11.15,8.5){\line(1,0){.3}}
-\put(11.3,4.25){\vector(0,1){4.25}}
-\put(11.3,4.25){\vector(0,-1){4.25}}
-\put(11.6,4.25){\makebox(0,0)[l]{\n\paperwidth}}
-
-\put(.75,7.75){\makebox(0,0)[bl]{Here is my header}}
-\put(10.25,7.75){\makebox(0,0)[br]{9/30/99}}
-\put(.75,.75){\makebox(0,0)[tl]{Here is my footer}}
-\put(10.25,.75){\makebox(0,0)[tr]{7-9}}
-\end{picture}
-
-\caption{Slide margins.\label{SlideMargins}}
-\end{center}
-\hrule height 1pt\relax
-\end{figure}
-
-Look at Figure \ref{SlideMargins}. Note that the headers and footers lie {\em
-inside} the top and bottom margins, respectively. The slide is then centered
-horizontally and vertically between the margins.
-
-
-\section{Magnification and lengths}
-
-"seminar.sty" changes \TeX's magnification so that the output is larger than
-when typesetting an article. This means, for example, that if you paste some
-input from a paper you are writing with \LaTeX\ into a slide, it will look
-pretty much the same in the slide, except that it is magnified. For example,
-"\vspace{.5in}" produces a space that gets bigger along with the fonts and
-everything else. Of course, it won't look identical, since "seminar.sty" uses
-its own spacing parameters and margins.
-
-\TeX's standard magnifications are in magsteps. $n$ magsteps means a
-magnification of $1.2^n$. "seminar.sty"'s default magnification is 4 magsteps,
-but you can change this with the command
-\begin{MD}
- \slidesmag{n}
-\end{MD}
-<n> should be an integer between $-5$ and 9.
-
-As noted above, lengths grow with the magnification. For spacing, like the
-parameter "\parindent" or using "\\[2pt]" to add a little extra space between
-lines, this is great, because it is easier to think in unmagnified dimensions.
-Setting "\parindent" to ".5cm" will look the same (relative to everything
-else) whatever the magnification.
-
-However, if you want to set the unit in a "picture" environment to 1cm, {\em
-as it appears on the slide}, use
-\begin{LVerbatim}
- \setslidelength{\unitlength}{1cm}
-\end{LVerbatim}
-"\setslidelength" is like \LaTeX's "\setlength", but it scales the size down
-so that the resulting size after magnification is, in this example, 1cm (in
-the process, it removes any stretch from rubber lengths).%
-\footnote{If you know what {\tt true} dimensions are, you may be wondering why
-they haven't been mentioned. These are not recommended because you will not be
-able to print the slides two-up or use the {\tt article} format.}
-There is also a
-\begin{MD}
- \addtoslidelength{cmd}{len}
-\end{MD}
-command.
-
-"seminar.sty" also provides the lengths
-\begin{MD}
- \semin\\
- \semcm
-\end{MD}
-which are equal to an inch and a centimeter, scaled down to ``before
-magnification'' size. For example,
-\begin{LVerbatim}
- \rule{1pt}{4\semcm}
-\end{LVerbatim}
-makes a line 4 centimeters long on the transparency,.\footnote{Suppose you
-want to use another unit, such as millimeters, instead of centimeters. Then
-try this:
-\begin{LVerbatim}
- \newcommand{\semmm}{\semcm}
- \renewcommand{\semcmlength}{1mm}
- \setslidelength{\semmm}{1mm}
-\end{LVerbatim}}
-
-"\textwidth", "\textheight", "\columnwidth" and "\linewidth" all have the
-expected values in slides. (But "\slidewidth" and "\slideheight" do not.)
-Thus, this would
-\begin{LVerbatim}
- \rule{1pt}{.5\textwidth}
-\end{LVerbatim}
-make a line that is 1/2 the width of the slide.
-
-For help getting an EPS file to be the right size, see page \pageref{EPS}.
-
-Finally, there are some parameters that "seminar.sty" scales for you, and
-hence you can (and should) set them at their magnified values (the actual size
-on transparencies):
-\begin{itemize}
- \item "\slidewidth" and "\slideheight"
- \item "\slideframewidth" and "\slideframesep" (see Section \ref{S-frames}).
- \item The slide margin parameters (see Section \ref{S-slidemargins}).
- \item The \LaTeX\ page parameters, {\em when they are set in the
-preamble}.\footnote{The \LaTeX\ page parameters are listed on page 163 of
-Lamport's {\em \LaTeX\ User's Guide and Reference Manual}. They are used for
-notes (see Section \ref{S-notes}) and the \o{article} option (see Sections
-\ref{S-twoup} and \ref{S-article}), but not for printing slides onto
-transparencies. Lamport warns that resetting page parameters in the middle of
-the document is tricky; here it is more so, because you do have to worry about
-scaling them. But you can use "\setslidelength" for this.}
-\end{itemize}
-
-Note that the warnings about overfull slides (see Section \ref{S-pagebreak})
-report unmagnified dimensions.
-
-
-\section{Font sizes}
-
-The "\slidesmag" command lets you change the magnification of your document.
-You can effectively fine tune the magnification by using the "11pt" and "12pt"
-style options. For example, instead of increasing the magnification from 4 to
-5, you can switch to the "12pt" style option. There are differences---e.g.,
-magnification affects the space you get from "\hspace{1in}"---but the fonts
-will at least be roughly the same size either way. The "11pt" option gives a
-half-step, somewhat like "\slidesmag{4.5}", if the latter were permitted.
-
-Sometimes you want to use smaller font sizes for a single slide, in order to
-fit in that little bit of extra material, or to use larger font sizes, so that
-the few things you have to say on a slide don't look too lonely. You can't
-changing the magnification in the middle of the document, but you can change
-the size of the fonts with the command
-\begin{MD}
- \ptsize{n}
-\end{MD}
-This switches to the font sizes that are in effect when you use the "<n>pt"
-option. Actually, <n> can be 8, 9, 10, 11, 12, 14 or 17, whether you have
-"art<n>.sty" or not.
-
-
-\section{Spacing parameters\label{S-spacing}}
-
-\begin{figure}
-\hrule height 1pt
-\begin{center}
-\begin{tabular}{llc}
-{\em Command:} & {\em Initializes:} & {\em Default} \\[2pt]
-\N\slideparskip & "\parskip" & "1ex minus .2ex"\\
-\N\slideparindent & "\parindent" & "0pt"\\
-\N\slidefootnotesep & "\footnotesep" & "1.2ex"\\
-\N\slideleftmargini & "\leftmargini" & "1.8em" \\
-\N\slideleftmarginii & "\leftmarginii" & "1.4em" \\
-\N\slideleftmarginiii & "\leftmarginiii" & "1em" \\
-\N\slidelabelsep & "\labelsep" & ".5em" \\
-\N\slideitemsep & "\itemsep" & ".8ex minus .2ex" \\
-\N\slidepartopsep & "\partopsep" & "1ex minus .2ex" \\
-\N\slidestretch & "\baselinestretch" & "1.2"\\
-\N\slidearraystretch & "\arraystretch" & "1.2"
-\end{tabular}
-
-\caption{Slide spacing parameters.\label{SpacingDefaults}}
-\end{center}
-\hrule height 1pt
-\end{figure}
-
-The commands in Figure \ref{SpacingDefaults} are used to initialize some of
-the spacing parameters at the beginning of each slide environment and when
-"\ptsize" is used in a slide environment. These are spacing parameters that
-should depend on the size of fonts and that in \LaTeX's "article" style would
-be set in "art10.sty", etc. These commands should all be changed with
-"\renewcommand", even though, except for the "stretch" parameters, their
-values should be lengths.
-Note that "ex" and "em" units are used because these are the units that depend
-of font sizes.
-
-Outside a slide environment, redefine the commands on the left if you want to
-change these spacing parameters. Within a slide environment, reset the
-parameters directly, or redefine the commands on the left and then use the
-"\ptsize" command.
-
-In other \LaTeX\ styles, the extra distance between lines that is inserted
-when "\baselinestretch" exceeds 1 is eaten up by tall or deep lines. E.g., if
-the line contains a table or a large math operator, there is probably no
-extra space at all. The advantage of this system is that the distance between
-baselines does not fluctuate with every tilde. The disadvantage is that lines
-can end up too close.
-
-In "seminar.sty", on the other hand, fraction
-\begin{MD}
- \slideskip
-\end{MD}
-of the extra space cannot be eaten, but up to fraction
-\begin{MD}
- \slideshrink
-\end{MD}
-of this extra space that cannot be eaten can be removed if there is too much
-material on the slide. This gives you added flexibility about how much
-material to include on a slide. Both \n\slideskip\ and \n\slideshrink\ can be
-set with "\renewcommand" to a number between 0 and 1. The default value of
-\n\slideskip\ is ".75" and the default value of \n\slideshrink\ is ".25". Set
-\n\slideskip\ to "0" to revert to \LaTeX's usual behavior, as described above.
-
-For example, suppose you are using a 10pt font, \n\slidestretch\ is "1.2",
-\n\slideskip\ is ".75", and \n\slideshrink\ is ".25". The "\baselineskip" for
-a 10pt font is normally 12pt, leaving a little space between the lines. Then
-"\baselineskip" is set to
-\begin{center}
- "\slidestretch" $\times$ "12pt" $=$ 1.2$\times$12pt $=$ 14.4pt
-\end{center}
-The extra space between lines that is inserted is thus 2.4pt, and
-\begin{center}
- "\slideskip" $\times$ 2.4pt $=$ .75$\times$2.4pt $=$ 1.8pt
-\end{center}
-of this cannot be eaten by tall or deep lines. However, the space between
-lines can be reduced by up to
-\begin{center}
- "\slideshrink" $\times$ 1.8pt $=$ .25$\times$1.8pt $=$ .45pt
-\end{center}
-if the slide would otherwise be too long.
-
-
-\section{Slide frames\label{S-frames}}
-
-Slides can be framed. The command
-\begin{MD}
- \slideframe[commands]{style}
-\end{MD}
-specifies the frame style to use. Valid frame styles are "none" and "plain",
-unless you use macros that define additional styles. For example, the
-\o{fancybox} style option defines the frames "shadow", "double", "oval" and
-"Oval" (corresponding to the "\shadowbox", "\doublebox", "\ovalbox" and
-"\Ovalbox" commands defined in that style option). The \o{semcolor}
- option defines the styles "scplain", "scdouble", and "scshadow".
-
-All the frame styles use the lengths
-\begin{MD}
- \slideframewidth\\
- \slideframesep
-\end{MD}
-which are the (magnified) width of the line (default 4pt) and the distance
-between the slide and the frame (default .4in), respectively.
-
-\n\slideframe's optional argument is for commands that you want to use to
-customize the slide frame style. For example:
-\begin{LVerbatim}
- \slideframe[\setlength{shadowsize}{12pt}]{shadow}\\
- \slideframe[\psset{fillstyle=gradient}]{scplain}
-\end{LVerbatim}
-
-If you want to build your own custom slide frame, use the command
-\begin{MD}
- \newslideframe{style}[commands]{frame command}
-\end{MD}
-<style> is the name of the frame, "[<commands>]", which is optional, will be
-inserted before the frame command and before the <commands> given by
-"\slideframe"'s optional argument. These commands can be used to set some
-default parameter values. Then the final argument should frame "#1".
-
-For example, if "\myframe{foo}" frames "foo", and if "\myframe" uses the
-length "\baldness" as a parameter, then you might write
-\begin{LVerbatim}
- \newslideframe{wildframe}[\setlength{\baldness}{.2cm}]%
- {\myframe{#1}}
-\end{LVerbatim}
-You can still override the default value of "\baldness", as in
-\begin{LVerbatim}
- \slideframe[\setlength{\baldness}{.1cm}]{wildframe}
-\end{LVerbatim}
-
-There is a starred version of \n\slideframe\ that adds the frame to previously
-specified frames.\footnote{If using color or PostScript images, note that each
-frame gets added to the background.} This can be used for special tricks. For
-example, if you are using the \o{fancybox} and \o{semcolor} options, then
-\begin{LVerbatim}
- \newslideframe{draft}%
- {\boxput{\rput{30}{\Huge\gray DRAFT}}{#1}}
- \slideframe{draft}
- \slideframe*{scdouble}
-\end{LVerbatim}
-puts the word ``DRAFT'' in the background of each slide, gray and rotated 30
-degrees, and then adds a double frame.\footnote{Use "\boxput*" to put "DRAFT"
-in the foreground. See "fancybox.doc" for details.}
-
-
-\part{Advanced Features}
-
-\section{Counters}
-
-The counter for slides is \C{slide}. The default definition of \N\theslide\ is
-"\arabic{slide}". You can use "\label" and "\ref" to cross-reference slides,
-and the page number in slide environments is set to
-\n\theslide.\footnote{However, these page or slide cross-references are not
-always accurate when you let \TeX\ break pages for you within a slide.} Thus,
-you can write, for example,
-\begin{LVerbatim}
- See equation (\ref{foo}) on Slide \pageref{foo}.
-\end{LVerbatim}
-
-You may want some counters, such as equation counters, to be reset with each
-new slide environment or \n\newslide\ command. By default, only the "footnote"
-counter is reset this way, but you can specify your own (comma-separated) list
-of counters to be reset with the command
-\begin{MD}
- \slidereset{list}
-\end{MD}
-If you want to reset additional counters, rather than replace the list
-entirely, use
-\begin{MD}
- \addtoslidereset{list}
-\end{MD}
-
-There is another way in which the footnote counter gets special treatment. The
-command
-\begin{MD}
- \theslidefootnote
-\end{MD}
-is used for the counter text instead of "\thefootnote". The default definition
-is
-\begin{LVerbatim}
- \alph{footnote}
-\end{LVerbatim}
-
-\section{Selectively including or excluding slides}
-
-The commands
-\begin{MD}
- \onlyslides{list}\\
- \notslides{list}
-\end{MD}
-can be used to include or exclude only those slides in the given list. The
-argument should expand to a comma-separated list of numbers or ranges. The
-numbers do not need to be in order, the list can contain numbers that do not
-correspond to any slide, and there can be duplicate numbers. Negative numbers
-should be enclosed in curly braces. Since the argument is first expanded, you
-can use the "\ref" command in the argument. For example,
-\begin{LVerbatim}
- \onlyslides{{-2},\ref{dp}-10,\ref{chart},0,17-999}
-\end{LVerbatim}
-is legal. If "\label{dp}" appears in slide 5 and "\label{chart}" appears in
-slide 12, this is equivalent to:
-\begin{LVerbatim}
- \onlyslides{{-2},5-10,12,0,17-999}
-\end{LVerbatim}
-
-\section{Printing your slides two-up\label{S-twoup}}
-
-Printing your slides two-up is useful both for previewing slides and for
-making hard copies to distribute or for proofreading.
-
-One way to print your slides two-up is to include the \O{article} style
-option. This is described further below.
-
-Another way is to include the command
-\begin{MD}
- \twoup[n]
-\end{MD}
-in the preamble. This inputs "2up.tex", which contains generic macros for
-two-up printing, and sets the parameters to values that are likely to work.
-Including the optional argument "[<n>]" increases the two-up magnification by
-$n$ magsteps. $n$ can be a positive or negative integer. If you are not able
-to get the right layout, then include the \O{2up} style option, read the
-documentation of "2up.tex", and set the parameters yourself, rather than using
-the \n\twoup\ command.
-
-The \o{article} style option is also called the article {\em format} (as
-opposed to the slides format). In the article format without the \o{portrait}
-option, the slides are centered horizontally and vertically, two to a page (if
-they fit---landscape slides do fit by default). With the portrait option, the
-slides are printed side-by-side, two to a page. In the \o{article} format, you
-can mix landscape and portrait slides with different orientations, but this
-does not work well with the \o{portrait} option.
-
-You can change the article format's magnification with
-\begin{MD}
- \articlemag{n}
-\end{MD}
-This command works like the "\slidesmag" command (page \pageref{+slidesmag}).
-The default is
-\begin{LVerbatim}
- \articlemag{0}
-\end{LVerbatim}
-Increase the article magnification if the slides look too lonely; decrease it
-if they are not coming out two-up.
-
-The size of the slides depends on the {\em difference} between the
-magnifications in the slides and article format. E.g., since the default
-slides magnification is 4 magsteps, the slides are scaled down in the article
-format by 4 magsteps. When you change the slides magnification with
-\n\slidesmag, you also have to change the article magnification with
-\n\articlemag\ by the same amount if you want the size of the slides in the
-article format to remain the same. However, when the article magnification in
-magsteps is negative , you will be using non-standard font magnifications
-(which will produce terrible results if you cannot generate the needed
-fonts---see Appendix \ref{bitmaps} for advice).
-
-Whether or not landscape slides (or rotated portrait slides) come out two-up
-in the article format without the \o{portrait} option depends on (i) the
-difference between the slides and article magnification, (ii) the values of
-\n\slidewidth\ and \n\slideheight\, (iii) the size of the slide frame, and
-(iv) the article format's page parameters. With the default values of
-(ii)--(iv), the slides will still come out two-up if you change the difference
-between the slides and article magnification to 3 (e.g., increase the value of
-\n\articlemag\ by 1). Try this if you want the slides to be larger.
-
-If you use the \o{article} option {\em and} the \n\twoup\ command, then your
-slides should be printed four-up!
-
-You will notice labels on the side or bottom of each slide in the \o{article}
-format. The command
-\begin{MD}
- \slidestyle{style}
-\end{MD}
-determines where these labels go. There are three predefined slide styles:
-\begin{description}
-\item[\tt empty] No captions or labels are used.
-\item[\tt left] The labels go on the left of each slide (the default when the
-\o{portrait} option is not used).
-\item[\tt bottom] The labels go on the bottom (the default with the
-\o{portrait} option).
-\end{description}
-The label you get is the value of \N\slidelabel. The default definition of
-\n\slidelabel\ is
-\begin{LVerbatim}
- \bf Slide \theslide
-\end{LVerbatim}
-
-\section{Notes\label{S-notes}}
-
-In addition to slides, you can include a few comments following each slide to
-remind you of what to say, or even the entire text of your presentation for
-your own benefit or to be distributed to others. These comments or text,
-referred to in this documentation as ``notes'', do not go inside any special
-environment. However, a slide cannot go in the middle of a paragraph of notes.
-
-To include notes this way, you have to use one of the following style options,
-which determine what is printed:
-\begin{quote}
- \begin{tabular}{ll}
- \O{slidesonly} & Only the slides are printed.\\
- \O{notes} & Both notes and slides are printed.\\
- \O{notesonly} & Only the notes are printed.\\
- \end{tabular}
-\end{quote}
-These style options are referred to as {\em selections} in this documentation.
-
-The pages of notes following slide 5 are numbered 5.1, 5.2, etc.
-
-You can use the "portrait" option to print out your notes, even if you don't
-use this option when printing the slides.
-
-With the "notesonly" selection, the slides are not printed, but they are
-processed. This means that one can still refer in the notes to slides or to
-equations in slides.
-
-The fact that various spacing parameters are initialized at the beginning of
-each slide (see Section \ref{S-spacing}) means that when you reset these
-parameters outside a slide environment, only the notes are affected. This lets
-you use different values for notes and slides. The command \N\slidefonts\ can
-be used for any special font commands that should apply only to slides. Also,
-the command \N\everyslide\ is executed at the beginning of every slide, and
-you can use this for any other customizations you want to include.
-
-You can also use the "11pt" or "12pt" style option for your notes, without
-changing the size of the fonts in the slides, by using the "\ptsize" command
-to set the font sizes for slides. For example, suppose that the "12pt"
-document style option is used, but the preamble contains the command
-\begin{LVerbatim}
- \ptsize{11}
-\end{LVerbatim}
-and the second slide begins with the command
-\begin{LVerbatim}
- \ptsize{9}
-\end{LVerbatim}
-Then the notes use the "12pt" font size declarations, all the slides but the
-second one use the "11pt" font size declarations, and the second slide uses
-the "9pt" font size declarations.
-
-Notes are typeset using \LaTeX's standard output routines, and \LaTeX's
-standard page parameters.
-
- Finally, it is even possible to use a different page style for notes and
-slides. The page style for notes is set by the "\pagestyle" and
-"\thispagestyle" commands. The command
-\begin{MD}
- \slidepagestyle{style}
-\end{MD}
-sets a different page style for the slides. If the argument is empty, then the
-page style for slides reverts to the one for notes.\footnote{There is no
-"\thisslidepagestyle" command.}
-
-With the command
-\begin{MD}
- \onlynotestoo
-\end{MD}
-the "\onlyslides" and "\notslides" commands apply to the notes as well.
-
-
-\section{How notes are omitted\label{omit}}
-
-In the previous section, it was stated that notes are not enclosed in a
-special environment. "seminar.sty" omits notes using special
-macros\footnote{Defined in {\tt xcomment.sty}} that comment out everything
-{\em outside} the slide environments (and a few other environments mentioned
-below). Global declarations that should be processed even when slides are
-omitted go in \e{allversions*} environments, described below.
-
-"seminar.sty" also let you use a more conventional approach to notes. If you
-put the command
-\begin{MD}
- \noxcomment
-\end{MD}
-in the preamble, then the notes go inside \E{note} environments, and you can
-put all the global declarations outside any environment. "xcomment.sty" is
-used to make \e{note} a comment environment when note should be omitted, and
-otherwise the \e{note} environment does nothing. This mode of operation is
-more robust than omitting everything outside the slide environments, but
-remembering to insert the
-\begin{LVerbatim}
- \begin{note} ... \end{note}
-\end{LVerbatim}
-is more tedious.
-
-Here are a few technicalities that have to do with "xcomment.sty" and that
-apply whether or not you use \n\noxcomment.
-\begin{enumerate}
-\item The text that follows the beginning of a slide environment (when not
-using \n\noxcomment) or the end of a \e{note} environment {\em must have
-balanced curly braces}.
-\item "\input" and "\include" commands are followed, even when found in
-omitted notes, but you must use the \LaTeX\ syntax "\input{<file>}" (as
-opposed to \verb*+\input <file> +), and the inputted file must end with
-"\endinput" (this is a good practice anyway).
-\item In omitted text, "%" is still a comment character (hence it is possible
-to comment out a slide or note environment).
-\item A temporary file, "\jobname.tmp", is created (this is of no
-consequence---just in case you wanted to know where it comes from).
-\end{enumerate}
-
-The rest of this section deals with special considerations when omitting
-everything outside the slide environments.
-
-If you might want to make a global change to one of the slide parameters after
-the document preamble, you cannot include it in a slide environment because
-the change will be local, and you cannot include it in the notes because the
-change won't be processed when the notes are omitted.
-
-To get around this problem, an environment \E{allversions*} is provided. It is
-processed even when notes are omitted, and any parameter changes or command
-definitions made within the environment are global. Don't generate any output
-within this environment.
-
-On a rare occasion you might want to include some text that should be typeset
-even when the other notes are omitted (e.g., a list of the slides, or a cover
-page). The \E{allversions} environment is provided for this purpose.
-
-If you do any serious hacking, you might want to add to the list of
-environments that should be included with the "slidesonly" selection. Do this
-with the command
-\begin{MD}
- \addtoslidelist{list}
-\end{MD}
-where <list> is a comma separated list of environments, without spaces.
-
-\section{The article format\label{S-article}}
-
-The \o{article} style option was described in Section \ref{S-twoup} as a way
-to print your slides two-up. This option is also a good way to print your
-notes.
-
-The \o{article} option gets its name because your document is typeset somewhat
-like it would be with \LaTeX's "article" style. (It uses \LaTeX's standard
-page parameters, but some of the default values are different.) It is also
-called the article {\em format}; the slides format is what you get without the
-\o{article} option.
-
-You probably don't want to use the \o{portrait} style option with the
-\o{article} format except when you are only printing portrait slides. But you
-are welcome to experiment.
-
-With the \o{notesonly} selection, you can make the notes as big as you want
-using the \n\articlemag\ command (e.g., for easy reading while giving a
-presentation). Just as in the \o{slides} format, the page parameters are
-scaled at the beginning of the document so that they can be set with their
-true dimensions in the preamble.
-
-The commands
-\begin{MD}
- \setartlength{cmd}{len}\\
- \addtoartlength{cmd}{len}
-\end{MD}
-are analogous to "\setslidelength" and "\addtoslidelength", but they scale the
-lengths so that they end up at the specified size after magnification in the
-"article" format. You never would use such a command in slide environments or
-to set slide parameters, but you might use these in the notes if you were
-planning on typesetting your notes with the "article" format rather than the
-"slides" format.
-
-You can change the placement of slides in the \o{article} format using the
-\begin{MD}
- \slideplacement{name}
-\end{MD}
-command. Here are the valid placement names:
-\begin{description}
- \item[float] The slides are floated. This is the default with the \o{notes}
-selection and the \o{portrait} option.
- \item[float*] Like "float", but if the notes are printed in a two-column
-format the slides extend across both columns (e.g., like "table" versus
-"table*"). This is the default with the \o{notes} selection without the
-\o{portrait} option.
- \item[onepercol] Each slide is centered horizontally and vertically within a
-single column. This is the default when only slides are printed and the
-\o{portrait} option is used.
- \item[twopercol] Each slide is centered horizontally, two or one per column,
-depending on how many fit. This is the default when only slides are printed
-and the \o{portrait} option is not used.
- \item[here] Each slide is centered horizontally, separated from adjoining
-text or other slides by the rubber length \N\slidesep. The default value of
-\n\slidesep\ is "\intextskip". This is useful with the \o{notes} selection
-when you want the slides to precede accompanying comments and when you do not
-mind large spaces at the bottom of pages.
- \item[here*] This is like "here*", but with "here*" the length \n\slidesep\
-is not lost when it falls at the beginning of a page or after a slide.
-\end{description}
-
-If you want each slide environment to begin a new page (with any of the
-selections), put the command
-\begin{MD}
- \slideclearpagetrue
-\end{MD}
-in the preamble.
-
-The \o{notesonly} selection has a starred version, \O{notesonly*}, which
-produces a slide marker for each slide environment, like this one:
-\begin{center}
-\leavevmode
-\vbox{%
-\hrule height 1pt
-\kern 8pt
-\hbox to \linewidth{\hss \LARGE\bf Slide 4 \hss}%
-\kern 8pt
-\hrule height 1pt}
-\end{center}
-
-
-Commands that are irrelevant in the "article" format are simply ignored. The
-idea is that it should be possible to switch back and forth between the two
-formats without making any other changes in the document. However, this is not
-entirely possible. Changing "\parindent" or "\textwidth" in the preamble
-affects both formats. You can get around this using the \n\ifarticle\
-conditional. For example,
-\begin{LVerbatim}
- \ifarticle
- blah blah
- \else
- blee blee
- \fi
-\end{LVerbatim}
-The "\else" part is optional.
-
-
-\section{Page styles}
-
-The page styles "empty", "plain", "headings" and "myheadings" work like in
-\LaTeX's article style. There is also a page style "align" which puts "+"
-signs in the corners, like in \SliTeX.\footnote{See question \ref{Pagestyle}
-in Section \ref{tips} for suggestions on defining new page styles.} You can
-change the size of the fonts used in headers and footers in the slides format
-by setting the commands
-\begin{MD}
- \slideheadfont\\
- \slidefootfont
-\end{MD}
-to the desired size, using "\renewcommand" (but any explicit font declarations
-in a page style override these commands). The default definition of these
-commands is "\scriptsize".
-
-
-\section{Other style options\label{options}}
-
-The style options described so far, "portrait", "article", "slidesonly",
-"notes", and "notesonly", were designed specifically for "seminar.sty". There
-are other such style options described elsewhere in this documentation:
-"semrot" (page \pageref{o+semrot}), \o{semlayer} (page \pageref{o+semlayer}).
-\o{semcolor} (page \pageref{o+semcolor}), "semhelv" (page
-\pageref{o+semhelv}), "semlcmss" (page \pageref{o+semlcmss}), and "a4" (page
-\pageref{o+a4}).
-
-Here are two more style options that are part of the "seminar.sty" package,
-but that can be used with other document styles:
-\begin{description}
-\item[fancybox] "fancybox.sty" is specific to slides, but it contains commands
-and documentation that are useful for making slides.
-
-\item[slidesec] This sets up some sectioning/heading commands for slides, and
-lets you print a list of slides or a table of contents. See the file
-"slidesec.sty" for details.
-\end{description}
-
-It is impossible to predict, much less describe, the consequences of using all
-the other available \LaTeX{} style option with each selection and format.
-Since this document style is an extension of \LaTeX's "article" style, style
-options and commands that do not work with \SliTeX{} may well work here. Just
-about any style option that works with \LaTeX's "article" style will work with
-the "article" format. When unsure of the effect of an option, just try it and
-see for yourself what happens.
-
-\section{Overlays\label{S-overlays}}
-
-For overlays, you must use both the \O{semlayer} and \o{semcolor} style
-options (see page \pageref{o+semcolor}).
-
-Overlays have two purposes. First, you can use overlays to gradually add
-layers of information on a slide during a presentation. Second, you can use
-overlays to make color layers; each layer is printed in black-on-white on
-paper, and then you use some kind of color copying service to put each layer
-on a transparency in a different color. This is not nearly as nice as having a
-color printer or using a color printing service, but it's the next best thing.
-
-"seminar.sty" lets you make both types of overlays (and the main slide) from a
-single slide environment. The command\footnote{You can also write
-\begin{Ex}
- "\begin{overlay}{<n>}" $\ldots$ "\end{overlay}"
-\end{Ex}}
-\begin{MD}
- \overlay{n}
-\end{MD}
-puts whatever is in its scope (\TeX\ group) on overlay $n$, where
-$n=0,\ldots,9$. Actually, overlay 0 refers to the main slide, but you might
-use "\overlay{0}" because overlay commands can be nested. As implemented by
-the "semcolor" style option, these overlay commands can be used just about
-anywhere, including in math mode, tables, and around an included graphics file
-(if it is a conforming EPS file, at least). Also, it is all right to use
-non-consecutive overlay numbers.
-
-For color layers, you have to start by defining some colors using the command
-\begin{MD}
- \colorlayers{colors}
-\end{MD}
-<colors> should be a comma separated list of color names, without spaces, as
-in
-\begin{LVerbatim}
- \colorlayers{red,green,blue}
-\end{LVerbatim}
-Then you can use the command "\red" just like the command \n\overlay"{<n>}";
-everything in its scope goes on a red color layer.
-
-The "\colorlayers" command obeys the usual rules on scope. You can use this
-command any time, including in a slide environment. The command is cumulative,
-meaning that previously defined color layers continue to exist. The command
-was purposely defined so that it does not complain when a color name is
-already defined; this makes it easier to switch from some other color system
-to a layer system. However, you should be careful not to inadvertently
-redefine some command that you need. Fortunately, there are no \TeX{}
-primitives whose names are the names of colors.
-
-When you print out the slides, the main slide is printed, followed by each of
-the color layers (if any) for the main slide. Then each of the overlays is
-printed, together with each of its color layers. Only overlays or color layers
-that are actually used (i.e., that are not empty) are printed.
-
-You can turn overlays and color layers on and off with the commands
-\begin{MD}
- \overlaystrue\\
- \overlaysfalse\\
- \layerstrue\\
- \layersfalse
-\end{MD}
-These commands can be used at any time, and they obey the usual scoping rules.
-The default is for overlays to be active in the "slides" format and suppressed
-in the "article" format.
-
-The counter \C{overlay} keeps track of the overlays. The default definition of
-\N\theoverlay\ is:
-\begin{LVerbatim}
- \theslide-\alph{overlay}
-\end{LVerbatim}
-Overlays can be cross-referenced.
-
-The command \N\currlayer\ is set to the name of the current color layer.
-\N\thelayer\ makes a label for layers; its default definition is:
-\begin{LVerbatim}
- \theoverlay-\currlayer
-\end{LVerbatim}
-Color layers cannot be cross-referenced.
-
-For example, if slide 7 has overlays 1 and 2 and colors "red" and "green",
-then the main slide is numbered 7, followed by layers 7-red and 7-green,
-followed by overlay 7-a, followed by layers 7-a-red and 7-a-green, followed by
-overlay 7-b, followed by layers 7-b-red and 7-b-green.
-
-The caption used in the slide styles is \n\overlaylabel\ for overlays and
-\N\layerlabel\ for layers. The defaults are, respectively,
-\begin{LVerbatim}
- \bf Overlay \theoverlay
- \bf Layer \thelayer
-\end{LVerbatim}
-
-By default the overlays and layers use the same page styles in the "slides"
-format as their ``owner.'' You can specify special page styles with the
-commands:
-\begin{MD}
- \overlaypagestyle{style}\\
- \layerpagestyle{style}
-\end{MD}
-
-Finally, by default the overlays and layers use the same frame style as their
-``owner.'' You can specify special frame styles with the commands:
-\begin{MD}
- \overlayframe[commands]{style}\\
- \layerframe[commands]{style}
-\end{MD}
-
-
-\part{Help\label{Help}}
-
-Road map:
-\begin{itemize}
- \item If you just want to figure out how to do something, check Section
-\ref{tips}, ``Tips and tricks.''
- \item If you are trying to decipher an error message, check Section
-\ref{errors}, ``Errors.''
- \item If you are trying to solve some system-dependent problem that has
-arisen, check Section \ref{trouble}, ``Troubleshooting.''
- \item To convert \SliTeX\ files, see Section \ref{slitex}, ``Converting
-\SliTeX\ files''.
-\end{itemize}
-
-\section{Tips and tricks\label{tips}}
-
-\faq{How can I fit more material in the slides?}
-
-Or alternatively, make the little material you have fill up the slide.
-
-Let us count the ways:
-\begin{enumerate}
-\item Change the magnification with \n\slidesmag"{<n>}" (affects all the
-slides).
-\item Change the height and/or width of one or all the slides.
-\item Use "\ptsize{<n>}".
-\item Change \n\slidestretch.
-\item Use the \n\raggedslides\ command, which changes the propensity to
-hyphenate.
-\end{enumerate}
-
-\faq{How do I include an Encapsulated PostScript figure?\label{EPS}}
-
-The only thing tricky about including EPS files is getting the size right. For
-example, suppose the you want to include a postscript file in a slide using
-the "epsf.sty" macros, and you want it to be 6 inches wide. Then this will do
-the trick:
-\begin{LVerbatim}
- \setslidelength{\epsfxsize}{6in}
- \epsffile{mypic.eps}
-\end{LVerbatim}
-
-If you include the command
-\begin{MD}
- \espfslidesize
-\end{MD}
-(e.g., in the preamble), then "epsf.sty" will take care of scaling the size
-for you, and so you can just set "\epsfxsize" and "\epsfysize" to their
-magnified sizes (using "\setlength" rather than "\setslidelength"). Or you can
-not set these parameters at all, and then the eps file appears at its natural
-size on the slide.
-
-Either way, this will have the expected effect:
-\begin{LVerbatim}
- \setlength{\epsfysize}{.8\textheight}
- \epsffile{mypic.eps}
-\end{LVerbatim}
-
-"psfig.tex" does not handle magnification properly. By using magnified
-dimensions, without "\setslidelength", as in
-\begin{LVerbatim}
- \psfig{file=mypic.eps,width=6in}
-\end{LVerbatim}
-the picture should appear correctly within a slide, but then it will not scale
-properly if you try to use the \o{article} option or the \n\twoup\ command.
-The solution, if using Rokicki's "dvips", is to use "epsf.sty" (written by the
-man himself).
-
-\faq{How can I print just selected overlays, layers or pages of notes in the
-{\tt slides} format?}
-
-The "\onlyslides" and "\notslides" commands affect only slides. If a slide is
-omitted, so are all its overlays and color layers. To be more selective, you
-have to use your dvi driver to select the pages to be printed.
-
-In the "slides" format, the page numbers recognized by dvi drivers correspond
-to the numbers of the slides. This means that a slide and all the overlays,
-layers and notes that correspond to that slide have the same page number. Some
-drivers allow one to select occurrence $n$ of a page number. E.g., with
-"dvips",
-\begin{LVerbatim}
- dvips -p2.1 -l2.4 myslides
-\end{LVerbatim}
-will print the first through fourth page of overlays or notes that follow
-slide 2.
-
-If your dvi driver does not support such selection, and you would prefer that
-the driver recognize physical page numbers, then put the command
-\N\truepagenumbers\ in the preamble.
-
-
-\faq{How do I define custom page styles?}
-\label{Pagestyle}
-
-There is nothing special about defining new page styles in "seminar.sty".
-However, to make it easier to do this in the preamble, the commands
-\begin{MD}
- \newpagestyle{style}{header}{footer}\\
- \renewpagestyle{style}{header}{footer}
-\end{MD}
-are provided.\footnote{%
- You can also use the macros in "fancyheadings.sty", which is available from
-various archives. However, you have to set the pagestyle {\em after}
-"\begin{document}".
-Otherwise, the dimensions get screwed up. If using the \o{slidesonly}
-selection, then you also need to enclose the "\pagestyle" command in
-an \e{allversions*} environment. E.g.,
-\begin{LVerbatim}
- \begin{allversions*}
- \pagestyle{fancy}
- \end{allversions*}
-\end{LVerbatim}}
-
-<style> is the name of the page style, and <header> is the header, and
-<footer> is the footer. These can only be used for simple page styles that are
-the same for odd and even pages, and that do not do anything special with
-section marks.
-
-Headers and footers are set in an "\hbox" the width of the page
-("\textwidth"). You can use stretchable space such as "\hspace*{\fill}" or
-"\hfil" to center some information or put it flush against the margins. See
-the definitions of page styles in "latex.tex" and "article.sty" for examples.
-
-Here is an example: Professor Starr wants lots of information in the headers
-and footers for the slides, and so she defines the page style
-"mypagestyle":\footnote{{\tt\string\thedate} is set with the {\tt\string\date}
-command.}
-\begin{LVerbatim}
- \newpagestyle{mypagestyle}%
- {\sl Big U \hfil \thedate \hfil \thepage}%
- {\hfil File \jobname.tex; printed \today\hfil}
-\end{LVerbatim}
-Prof.\ Starr wants to use the standard "headings" page style for notes and the
-"mypagestyle" page style for slides, and she wants overlays to just have the
-overlay number. Therefore, she defines another page style for the overlays:
-\begin{LVerbatim}
- \newpagestyle{myoverlays}{\hfil \thepage}{}
-\end{LVerbatim}
-and she puts
-\begin{LVerbatim}
- \pagestyle{headings}
- \slidepagestyle{mypagestyle}
- \overlaypagestyle{myoverlays}
-\end{LVerbatim}
-in the preamble.
-
-\faq{How do I change a parameter only for the {\tt slides} format?}
-\label{conditionals}
-
-The conditionals
-\begin{MD}
- \ifarticle\ $\ldots$ "\else" $\ldots$ "\fi"\\
- \ifslidesonly\ $\ldots$ "\else" $\ldots$ "\fi"\\
- \ifnotes\ $\ldots$ "\else" $\ldots$ "\fi"\\
- \ifnotesonly\ $\ldots$ "\else" $\ldots$ "\fi"\\
- \ifportrait\ $\ldots$ "\else" $\ldots$ "\fi"
-\end{MD}
-allow one to select for what versions material is to be processed. "\ifnotes"
-is true if and only if the "notes" selection is in effect, and so on. The
-"\else" clause is optional. See {\em The \TeX book}, Chapter 20, for more
-information about using conditionals.
-
-For example, the first line below sets the slide rotation to "right" in the
-"article" format only. The second line changes the page style for the "notes"
-and "notesonly" selections and "article" format:
-\begin{LVerbatim}
- \ifarticle\sliderotation{right}\fi
- \ifarticle\ifslidesonly\else\pagestyle{myheadings}\fi\fi
-\end{LVerbatim}
-
-\faq{Why does extra space get inserted at the top of a slide when I begin the
-slide with a color or overlay command (when using the \o{semcolor} option)?}
-
-Color and overlay commands with the "semcolor" option use "\special"'s. \TeX{}
-adds the space "\parskip" between the "\special"'s and the first material in
-the slide.
-
-Here is the workaround: If that material is an ordinary paragraph, put the
-command "\leavevmode" just after the color or overlay command. In other cases,
-if you are sure this is the problem, put "\vskip-\parskip" just before the
-color or overlay command.
-
-\section{Errors\label{errors}}
-
-There are several errors that identify themselves as being from "seminar.sty",
-but the error messages are so self-explanatory that that there is no need to
-describe them here. Instead, this section explains a few especially cryptic
-\TeX{} error messages that can arise when using "seminar.sty". These errors
-may also arise for reasons that are not particular to the "seminar.sty"
-macros. See your favorite \TeX{} and \LaTeX{} manuals for more help in
-debugging your documents.
-
-\error"! File ended while scanning use of \next."
-
-You are missing an "\end{document}" on the main file or an "\endinput" on a
-file that is input.
-
-
-\error"! File ended within \read."
-
-You may have an unmatched curly brace following "\begin{slide}" on the same
-line. See Section \ref{omit}.
-
-
-\error"! Paragraph ended before \begin@slide was complete."
-
-You have not specified the optional argument for the "slide" or "slide*"
-environment correctly (see Section \ref{slidedim}), or the first character in
-a slide environment is a "[" (put a pair "{}" of braces before the "[").
-
-\section{Troubleshooting\label{trouble}}
-\setcounter{faq}{0}
-
-\faq{A few slides do not come out two-up with the \o{article} option.}
-
-First, read Section \ref{S-twoup} carefully. If the slides still do not come
-out twoup, it might be that there is extraneous output between the slides. Try
-putting the commands
-\begin{LVerbatim}
- \slideplacement{here*}
- \setlength{\slidesep}{8pt plus 1fill}
-\end{LVerbatim}
-in the preamble ("8pt" should be one-half the minimum distance between
-slides). If this solves the problem, look for the extraneous output, or just
-leave those commands in the preamble.
-
-
-\faq{What kind of incompatibilities are there between {\tt seminar.sty} and
-other macros?}
-
-Of course, whenever you load macros that are not part of the standard \LaTeX{}
-distribution and that were not designed to work with "seminar.sty", problems
-may arise because of name conflicts. What are listed here are changes made to
-\LaTeX{} commands that may conflict with other macros that also redefine these
-command. The problems listed here are very unlikely to occur, however, unless
-you have a habit of seriously hacking the standard \LaTeX{} macro files.
-
-\begin{enumerate}
-\item This style modifies the definitions of the \LaTeX{} primitive
-"\document". It generally will not be upset by, nor will it void,
-modifications to "\document" made before "seminar.sty" is input. However,
-subsequent modifications of "\document" may cause problems.
-
-\item "xcomment.sty", which is input by "seminar.sty" with the "slidesonly"
-selection, modifies the definition of "\end" within included environments.
-This is generally compatible with modifications to "\end" made outside
-environments, but may conflict with modifications to "\end" made inside
-environments.
-\end{enumerate}
-
-\faq{Why are the landscape slides displayed sideways and the portrait slides
-displayed upside down on my previewer?}
-
-This document style makes frequent use of landscape mode. Some DVI-to-PS
-converters, such as older versions of Rokicki's "dvips", use their own
-PostScript macros to print a landscape document, rather than simply
-instructing PostScript to use landscape mode.
-If the PostScript output of such a converter is viewed using a PostScript
-previewer that does not allow you to choose the orientation of the display,
-the output will be positioned correctly on the page, but the page will always
-be displayed in portrait mode. When viewing slides without the "portrait"
-option, the landscape slides will be sideways, and the portrait slides will be
-upside-down!
-
-There is nothing this style can do to coerce the page to be displayed in
-landscape mode. There are various ways to minimize neck strain, however:
-\begin{enumerate}
-\item The direction in which the portrait slides are rotated can be reversed,
-so that they end up right-side-up. Just put
-\begin{LVerbatim}
- \sliderotation{right}
-\end{LVerbatim}
-before the beginning of the document (assuming that you are using rotation
-macros).
-\item You can also get the portrait slides to be displayed right-side-up by
-using the "portrait" style option (Section \ref{options}).
-\item In the "article" format, the document is typeset in portrait mode
-(unless the "portrait" option is used), and so the landscape slides are
-right-side-up. You can use this format when composing and proof-reading the
-slides.
-\end{enumerate}
-
-\faq{Why is my dvi driver soooo slow?}
-
-Probably it cannot find the right font bitmaps, and so it is either
-automatically generating new ones, or it is scaling the ones it can find.
-Either way, as long as you can somehow generate the missing font bitmaps, this
-problem is transitory. See Appendix \ref{bitmaps} for details.
-
-\faq{Why does \TeX{} complain about missing circle fonts?}
-
-Older versions of the NFSS use the names "circle10" and "circlew10" for the
-\LaTeX circle fonts, instead of the otherwise standard names "lcircle10" and
-"lcirclew10". You can copy your ".pk" and ".tfm" files to the new names, or
-get a new version of the NFSS.
-
-\section{Converting \SliTeX\ files}\label{slitex}
-
-"seminar.sty" can do everything \SliTeX\ can do, and much
-more\footnote{However, color layers and overlays require PSTricks and a
-PostScript printer.} Here is a brief and incomplete description of how to do
-with "seminar.sty" what you can do with \SliTeX, and how to convert \SliTeX\
-files.
-
-\begin{itemize}
- \item Use "seminar" as your document style, instead of "slides".
-
- \item Run \LaTeX\ or \AmS-\LaTeX, instead of \SliTeX.
-
- \item With "seminar.sty", the preamble and slides can all go in the same
-file.
-
- \item The default in "seminar.sty" is to get landscape slides. If you want
-to convert a \SliTeX\ file containing portrait slides, add the "portrait"
-style option, and replace your "slide" environments by "slide*" environments.
-
- \item With "seminar.sty", notes do not need to go in a separate environment.
-To convert a \SliTeX\ file containing "note" environments, define a note
-environment that does nothing:
-\begin{LVerbatim}
- \newenvironment{note}{}{}
-\end{LVerbatim}
-
- \item For color layers:
- \begin{itemize}
- \item Use the "\colorlayers" command instead of the "\colors" command.
- \item Delete the argument to the "slide" and "slide*" environments that
-lists the color layers.
- \item Include the \o{semlayer} style option.
- \end{itemize}
-
- \item "seminar.sty" does not use separate environments for overlays:
- \begin{itemize}
- \item Remove the "overlay" environments.
- \item Replace "\invisible" commands by "\overlay{1}", "\overlay{2}", etc.
- \item Include the \o{semlayer} style option.
- \end{itemize}
-
- \item To actually produce the overlays and color layers, you have to have
-PSTricks and a PostScript printer, and you must include the \o{semcolor} style
-option.
-
- \item Use \n\onlyslides"{<list>}" and \n\onlynotestoo\ instead of
-"\onlynotes".
-\end{itemize}
-
-
-\begingroup
-\def\addcontentsline#1#2#3{}%
-\def\thepart{Appendices:}
-\part{Configuration}
-\endgroup
-\begingroup
-\def\thepart{}
-\addcontentsline{toc}{part}{Appendices:\hspace{1em}Configuration}
-\endgroup
-\appendix
-
-Before reading this appendix, you should follow the installation instructions
-in the file "sem-read.me" that is distributed with "seminar.sty".
-
-\section{The short story about fonts}\label{short-fonts}
-
-"seminar.sty" is a \LaTeX{} style, and you can use whatever fonts that are
-compatible with \LaTeX\ (or \AmS-\LaTeX). However, you are likely to want to
-use special fonts with "seminar.sty"; see Appendix \ref{fonts} for help.
-Furthermore, you are likely to want to use fonts in sizes that are larger than
-the standard sizes; see Appendix \ref{bitmaps} for help.
-
-But if you don't want to read these appendices, you can just use whatever
-\LaTeX\ fonts you know how to use (e.g., the standard Computer Modern fonts).
-To be sure you need only standard font magnifications:\footnote{This is not a
-consideration if you are using only PostScript or other scalable fonts.}
-\begin{itemize}\label{font-res}
- \item Don't use the "11pt" or "12pt" style options (or the \n\ptsize{}
-command).
- \item Don't change the document magnification (or only use 0--4 magsteps).
- \item Don't use any font size larger than "\large".
- \item Don't use the \n\twoup\ command.
-\end{itemize}
-
-\section{Choosing fonts\label{fonts}}
-
-So that you can use different fonts for the notes and the slides (if you
-want), the command "\slidefonts" is invoked at the beginning of every slide
-environment. Define it to set up any special fonts for the slides.
-
-Here are the font configurations that come ready-to-use with "seminar.sty".
-You might also use these as a starting point for your own configurations.
-\begin{enumerate}
-\item You can just use the regular old Computer Modern fonts that you probably
-grew up on. For this, you don't have to do anything at all. Ain't that easy?
-But see the next section about font bitmaps.
-
-\item The \O{semhelv} style option sets up the PostScript Helvetica text fonts
-for the slides. The Computer Modern fonts are still used for math and for the
-notes with the \o{article} format. You need a PostScript printer, a dvi-to-ps
-driver that supports PostScript fonts (e.g., Rokicki's "dvips"), and the New
-Font Selection Scheme. You should also check the font file names used in
-"semhelv.sty", and change them if necessary to match the names on your system.
-
-This combination of fonts is highly recommended because sans serif fonts look
-good for slides, Helvetica is a resident font in just about all PostScript
-printers, and the fonts are scalable and thus there is no problem of needing
-new bitmaps.
-
-\item The \O{semlcmss} style option sets up the \SliTeX\ sans serif fonts for
-the slides, and uses the Computer Modern fonts for notes with the \o{article}
-format. The \SliTeX\ fonts are ugly, but they might be the only usable sans
-serif font you have on your system and you are really dying for that kind of
-font. Also, they usually come ready for printing magnified documents, and so
-you won't need too many new font bitmaps. You must have the New Font Selection
-Scheme. "semlcmss" uses
-\begin{LVerbatim}
- \slidesmag{4}
- \ptsize{10}
-\end{LVerbatim}
-Deviating from this will increase the need for new font bitmaps.
-\end{enumerate}
-
-The New Font Selection Scheme (NFSS) mentioned above is a macro package for
-\LaTeX{} that greatly simplifies using non-standard fonts. The NFSS was
-written by Frank Mittelbach and Rainer Sch\"opf, and is available from various
-archives, including:
-\begin{center}
-"ftp.uni-stuttgart.de"
-\end{center}
-It is far easier to take the 10 minutes or so that are required (in theory, at
-least) to install the NFSS, than it is to try to muck around with \LaTeX's
-font primitives.
-
-
-\section{Font bitmaps\label{bitmaps}}
-
-If you are only using PostScript or other scalable fonts, or if you obey the
-restrictions listed on page \pageref{font-res}, then you can ignores this
-appendix.
-
-To use "seminar.sty", you may need font bitmap sizes that are not currently
-found on your system. This section describes how to avoid this and what to do
-about it. First, a few paragraphs about magnification and font bitmaps.
-
-\TeX's Metafont fonts are designed for a type size, such as 5pt. Most font
-families are available at least in the sizes 5pt, 6pt, 7pt, 8pt, 9pt and 10pt.
-Some are also available in the sizes 12pt and 17pt (and others), but often any
-size above 10pt is obtained by scaling the 10pt fonts. Table \ref{font-mag}
-lists the possible magnifications for fonts, depending on which option you are
-using ("10pt", "11pt" or "12pt"), and depending on the \LaTeX{} type size
-declaration that is in effect (e.g., "\small"). The magnifications are given
-in magsteps, which is \TeX's standard unit for font magnifications. $n$
-magsteps means a magnification of $1.2^n$.
-
-\begin{table}
-\hrule height 1pt\relax
-\begin{center}
-\begin{tabular}{l|c|c|c|}
-\multicolumn{1}{l}{size} &
-\multicolumn{1}{c}{default (10pt)} &
- \multicolumn{1}{c}{11pt option} &
- \multicolumn{1}{c}{12pt option}\\
-\cline{2-4} "\tiny" & 0 & 0 & 0\\
-\cline{2-4} "\scriptsize" & 0 & 0 & 0\\
-\cline{2-4} "\footnotesize" & 0 & 0 & 0 \\
-\cline{2-4} "\small" & 0 & 0 & 1/2 \\
-\cline{2-4} "\normalsize" & 0 & 1/2 & 1 \\
-\cline{2-4} "\large" & 1 & 1 & 2 \\
-\cline{2-4} "\Large" & 2 & 2 & 3 \\
-\cline{2-4} "\LARGE" & 3 & 3 & 4\\
-\cline{2-4} "\huge" & 4 & 4 & 5\\
-\cline{2-4} "\Huge" & 5 & 5 & 5\\
-\cline{2-4}
-\end{tabular}
-
-\caption{Font magnification in magsteps ($n$ means a magnification of $1.2^n$)
-for a font that is available in 5pt, 6pt, 7pt, 8pt, 9pt and 10pt
-sizes.\label{font-mag}}
-\end{center}
-\hrule height 1pt\relax
-\end{table}
-
-Both the "article" and the "slides" formats may also magnify the document. By
-default, the magnification of the "slides" format is 4 magsteps, and the
-magnification of the "article" format is 0. To find the total font
-magnification, add the magnification listed in the table to the magnification
-of the document. E.g., in the "slides" format with the "12pt" option (or the
-command "\ptsize{12}" at the beginning of a slide), the "\large" command may
-invoke fonts that have a magnification of up to 7 magsteps.
-
-Most systems have font bitmaps for 0, 1/2, 1, 2, 3, 4 and 5 magsteps. If you
-obey the restrictions listed on page \pageref{font-res}, then you will only
-need fonts in these standard magnifications. However, if you want to use other
-font magnifications, then check with your system administrator to determine
-which of the following applies to you (or just plunge ahead and see what
-happens):
-\begin{enumerate}
-\item If you have Metafont and "dvips" or some other driver that automatically
-generates font bitmaps as needed, and if this feature is enabled, then you
-will simply notice that it takes a long time to print documents at first,
-because the driver has to wait for the new font bitmaps to be made.
-Eventually, you will have generated all the extra bitmaps you need, and this
-delay will go away.
-\item If you have Metafont, but your dvi driver does not automatically
-generate needed bitmaps, then you just need to keep track of what font bitmaps
-you are missing as you use "seminar.sty" and occasionally run Metafont to make
-them. You will also notice a delay when a font bitmap is missing, because your
-driver will probably scale the closest bitmap it finds, and this can take time
-on some systems.
-\item If you do not even have Metafont, then you have to try to get by without
-the extra bitmaps. Scaled fonts look lousy, but an occasional scaled font in a
-heading is not so bad.
-\end{enumerate}
-
-Of course, PostScript and other scalable fonts do not present any problem, and
-so it is a good idea to use these as much as possible. The Computer Modern
-fonts are available from Blue Sky Research in PostScript Type I format. If you
-do not have PostScript versions of the CM fonts, and you instead use other
-PostScript fonts for text, then you are likely to still need bitmapped fonts
-for mathematics. However, since mathematics is usually set at "\normalsize" or
-smaller, this is not a big problem.
-
-If you are installing "seminar.sty" on a multi-user system, then hopefully you
-will make the needed fonts available.
-
-\section{Color}
-
-You can use whatever color commands you ordinarily use with \LaTeX. You might
-try the \o{semcolor} style option, which lets you use the PSTricks color
-commands for printing on a color PostScript printer. The \o{semcolor} option
-combined with the \o{semlayer} option (see Section \ref{S-overlays}) lets you
-print color layers.
-
-\section{Landscape printing and slide rotation\label{S-landscape}}
-
-If your dvi driver supports a "\special" for landscape printing, then you can
-define \N\printlandscape\ in the preamble of your document to invoke this
-command. E.g., for "dvips" put the line
-\begin{LVerbatim}
- \renewcommand{\printlandscape}{\special{landscape}}
-\end{LVerbatim}
-in the preamble. Otherwise, "seminar.sty" will display a message reminding you
-to print your document in landscape mode, when appropriate.
-
-You can print both landscape and portrait slides in one shot if you can rotate
-the portrait slides when printing in landscape mode or the landscape slides
-when printing in portrait mode. If you are using a PostScript printer, you
-probably are using a dvi driver that supports rotation; otherwise, you
-probably are not. Here are suggestions for setting up rotation:
-\begin{itemize}
-\item The \o{semcolor} option provides an interface to the rotation macros in
-PSTricks (see Appendix \ref{S-semcolor}); it works with many popular dvi-to-ps
-drivers.
-
-\item If you are using Rokicki's "dvips" and want rotation but do not want to
-load the entire PSTricks package, then use the \O{semrot} option instead of
-the \o{semcolor} option.
-
-\item If the \o{semcolor} and \o{semrot} options do not work for you, but you
-have your own rotation macros, then you have to define the commands
-\begin{MD}
- \leftsliderotation\\
- \rightsliderotation
-\end{MD}
-so that they rotate something left and right, respectively. For example,
-\begin{LVerbatim}
- \renewcommand{\leftsliderotation}[1]{\rotateleft{#1}}
-\end{LVerbatim}
-\end{itemize}
-
-In any case, you can determine the direction of rotation using
-\begin{MD}
- \sliderotation{direction}
-\end{MD}
-where valid directions are "none", "left" and "right". The default is "left".
-
-By default, the headers and footers aren't rotated, but you can switch between
-rotating and not rotating the headers with the commands:
-\begin{MD}
- \rotateheaderstrue\\
- \rotateheadersfalse
-\end{MD}
-
-\section{The semcolor style option\label{S-semcolor}}
-
-The \O{semcolor} option sets up an interface between "seminar.sty" and the
-PSTricks package. PSTricks is a collection of PostScript macros for \TeX. It
-works with Rokicki's "dvips", and several other dvi-to-ps drivers. You can
-probably get the PSTricks package from wherever you obtained "seminar.sty", or
-check the archives listed in the PSTricks read-me file, "read-me.pst", which
-is distributed with "seminar.sty".
-
-What the \o{semcolor} style option gives you, compared to just using the
-PSTricks package, is:
-\begin{description}
-\item[Color] A small patch to make the PSTricks color commands more robust in
-slides.
-\item[Rotation] The rotations "left" and "right" are defined. "left" is the
-default.
-\item[Framing] The frame styles "scplain" (using "\psframebox"), "scdouble"
-(using "\psdblframebox") and "scshadow" (using "\psshadowbox").
-\item[Overlays] Overlays and layers, when used in conjunction with the
-\o{semlayer} option.
-\end{description}
-
-\section{A4 and other paper sizes\label{S-papersizes}}
-
-Use the \O{a4} option when using A4 paper. Note that this option does not
-correspond to an independent file.
-
-If you want to configure seminar.sty for A4 paper by default (without having
-to include style options), then you can do one of the following:
-\begin{enumerate}
-
- \item Add the following line to "seminar.con" (see Appendix
-\ref{S-configfile}):
-\begin{LVerbatim}
- \input{sem-a4.sty}
-\end{LVerbatim}
-
- \item Add the following lines to "seminar.con" (these lines are just the
-contents of "sem-a4.sty"):
-\begin{LVerbatim}
- \def\paperwidth{210mm}
- \def\paperheight{297mm}
- \input sem-page.sty
- \slidewidth 222mm
- \slideheight 152mm
-\end{LVerbatim}
-
- \item Create a file such as "mysem.sty", to be used as a document {\em
-style} (rather than style {\em option}), with the following lines:
-\begin{LVerbatim}
- \def\paperwidth{210mm}
- \def\paperheight{297mm}
- \input seminar.sty
- \slidewidth 222mm
- \slideheight 152mm
-\end{LVerbatim}
-
-\end{enumerate}
-
-For other paper sizes, you can create a style option by modifying
-"sem-a4.sty". Then any of the options described above is available to you,
-(with the appropriate parameter values). However, this will give satisfactory
-results only for paper sizes that are close to A4 or 8.5in by 11in.
-
-Note that for any paper size, even 8.5in by 11in, the page parameters that are
-set this way are just suggested defaults, and most people will want to
-customize them. Because of the variety of ways in which "seminar.sty"
-documents can be printed, this is a little more complex than with most
-document styles. Examine "sem-page.sty" to see what page parameters need to be
-set, and when.
-
-\section{Configuration file\label{S-configfile}}
-
-You can put customizations to "seminar.sty" in a file named "seminar.con".
-This file is optional. It is loaded by "seminar.sty" if it exists, {\em
-before} loading the style option files. E.g., "seminar.con" might contain the
-following lines:
-\begin{LVerbatim}
- \input semhelv.sty
- \input semcolor.sty
- \renewcommand{\printlandscape}{\special{landscape}}
- \endinput
-\end{LVerbatim}
-
-\clearpage
-\PrintUserIndex
-
-\end{document}
-%% END sem-user.tex
diff --git a/macros/latex/contrib/seminar/doc/semsamp1.pdf b/macros/latex/contrib/seminar/doc/semsamp1.pdf
deleted file mode 100644
index 3024550bec..0000000000
--- a/macros/latex/contrib/seminar/doc/semsamp1.pdf
+++ /dev/null
Binary files differ
diff --git a/macros/latex/contrib/seminar/doc/semsamp1.tex b/macros/latex/contrib/seminar/doc/semsamp1.tex
deleted file mode 100644
index 9f896093fc..0000000000
--- a/macros/latex/contrib/seminar/doc/semsamp1.tex
+++ /dev/null
@@ -1,110 +0,0 @@
-\listfiles
-%%
-%% This file may be distributed and/or modified under the conditions of
-%% the LaTeX Project Public License, either version 1.2 of this license
-%% or (at your option) any later version. The latest version of this
-%% license is in:
-%%
-%% http://www.latex-project.org/lppl.txt
-%%
-%% and version 1.2 or later is part of all distributions of LaTeX version
-%% 1999/12/01 or later.
-%%
-%% BEGIN semsamp1.tex
-%
-% This is a sample document for seminar.sty, v0.93 (and maybe later).
-%
-% Try this with and without the article option:
-
-\documentclass[fancybox,article]{seminar}
-
-\def\printlandscape{\special{landscape}} % Works with dvips.
-
-\articlemag{1}
-
-%\twoup % Try me.
-
-\newpagestyle{327}%
- {Economics 327 \hspace{\fill}\rightmark \hspace{\fill}\thepage}{}%
-\pagestyle{327}
-
-\markright{Choice under uncertainty}
-
-\slideframe{Oval}
-
-\newcommand{\heading}[1]{%
- \begin{center}
- \large\bf
- \shadowbox{#1}%
- \end{center}
- \vspace{1ex minus 1ex}}
-
-\newcommand{\BF}[1]{{\bf #1:}\hspace{1em}\ignorespaces}
-
-\begin{document}
-
-
-\begin{slide}
-\heading{A heading}
-
-One thing this example illustrates is how the {\tt article} style option is
-good for printing slides two-up, for distribution to a seminar audience or
-class, or just for proofreading.
-
-\BF{Definition}
-$p$ (weakly) first-order stochastically dominates $q$ if for every $\bar z\in
-Z$,
-\[
- p(z\leq \bar z) \leq q(z\leq \bar z)
-\]
-\end{slide}
-
-
-\begin{slide}
-\heading{Problems with stochastic dominance as a DT}
-
-\begin{center}
- \begin{tabular}{|r|l|}\hline
- $z$ & $p(z)$\\ \hline
- \$999 & .01\\ \hline
- \$1,000,000 & .99 \\ \hline
- \end{tabular}%
- \hspace{1cm}%
- \begin{tabular}{|r|l|}\hline
- $z$ & $q(z)$\\ \hline
- \$1,000 & 1\\ \hline
- \end{tabular}
-\end{center}
-\end{slide}
-
-\begin{slide}
-\heading{Candidate Theory \#3: Expected utility}
-
-Let $Z$ be an arbitrary set of outcomes. Let $u:Z\rightarrow R$ be a utility
-representation of the DM's preferences over the elements of $Z$ as certain
-outcomes. (I.e., $u(y)\geq u(z)$ iff $y \geq z$.)
-
-\end{slide}
-
-
-\begin{slide}
-\heading{Expected utility \& the St.\ Petersburg Paradox}
-
-This can get around even St.\ Petersburg Paradox, because we don't require
-that utility be linear in money:
-
-\begin{center}
- \begin{tabular}{r|c|c|c|c|c}\cline{2-6}
- Prize & \$2 & \$4 & \$8 & \$16 & $\ldots$\\ \cline{2-6}
- $u(z)=\log_2(z)$ & 1 & 2 & 3 & 4 & $\ldots$ \\ \cline{2-6}
- Prob. & 1/2 & 1/4 & 1/8 & 1/16 & $\ldots$\\ \cline{2-6}
- \end{tabular}
-\end{center}
-
-Expected utility is $\sum_{k=1}^\infty k/2^k = 2$, and so lottery gives same
-expected utility as getting \$4 for sure.
-\end{slide}
-
-
-\end{document}
-%% END semsamp1.tex
diff --git a/macros/latex/contrib/seminar/doc/semsamp2.pdf b/macros/latex/contrib/seminar/doc/semsamp2.pdf
deleted file mode 100644
index 117ef173f9..0000000000
--- a/macros/latex/contrib/seminar/doc/semsamp2.pdf
+++ /dev/null
Binary files differ
diff --git a/macros/latex/contrib/seminar/doc/semsamp2.tex b/macros/latex/contrib/seminar/doc/semsamp2.tex
deleted file mode 100644
index b332a31414..0000000000
--- a/macros/latex/contrib/seminar/doc/semsamp2.tex
+++ /dev/null
@@ -1,297 +0,0 @@
-%%
-%% This file may be distributed and/or modified under the conditions of
-%% the LaTeX Project Public License, either version 1.2 of this license
-%% or (at your option) any later version. The latest version of this
-%% license is in:
-%%
-%% http://www.latex-project.org/lppl.txt
-%%
-%% and version 1.2 or later is part of all distributions of LaTeX version
-%% 1999/12/01 or later.
-%%
-
-%% BEGIN semsamp2.tex
-% This is a sample document for seminar.sty, v0.93 (and maybe later).
-%
-% This file contains both landscape and portrait mode slides.
-% Choose one of the following to print them out:
-% - If using PSTricks, try the semcolor style option.
-% - If using Rokicki's dvips, try the semrot style option.
-% - To print the landscape slides, put \landscapeonly in the preamble.
-% To print the portrait slides, include the portrait style option and
-% put \portraitonly in the preamble.
-%
-%
-\documentclass[%
- slidesonly,% Try notes or notesonly instead.
- %notes,% Use instead of slidesonly to typeset the notes.
- %notesonly,% Use instead of slidesonly to typeset notes and slides.
- semcolor,% Try me if using PSTricks.
- semrot,% Try me if using Rokicki's dvips.
- %semhelv,% Try me if using a PostScript printer.
- %article,% Try me.
- %portrait,% Try me.
- %sem-a4,% Try me if using A4 paper.
- semlayer% This must be included, but you need the semcolor option to
- ]{seminar} % actually see the overlays.
-
-\slidesmag{5}
-\articlemag{1}
-
-%\twoup % Try me for twoup printing.
-
-%\portraitonly % To print only portrait slides
-%\landscapeonly % To print only landscape slides
-
-%\notslides{\ref{questions}-7,1} %Try me: The slides are omitted.
-%\onlyslides{\ref{questions}-7,1} %Try me: Only these slides are included.
-%\onlynotestoo %Try me: For selecting notes as well.
-
-%\colorlayers{red,blue} % Try deleting this if using the semcolor option,
- % to get \blue and \red to use PostScript color.
-
-%\overlaysfalse % Suppress overlays with semcolor option.
-%\layersfalse % Suppress color layers with semcolor option.
-
-\rotateheaderstrue % Try this out if using rotation macros.
-
-
-\title{Example for seminar.sty}
-\author{Policarpa Salabarrieta}
-\date{July 21, 1991}
-
-\newcommand\sref[1]{SLIDE \ref{#1}}
-\newcommand\heading[1]{\begin{center}\large\bf #1\end{center}}
-
-\newpagestyle{MH}%
- {University of Guaduas, March 13, 1998\hfil\thepage}{}
-\pagestyle{MH}
-
-\begin{document}
-
-\maketitle % This won't show up when \onlynotestoo is in effect.
-
-\begin{slide}
- \ifslidesonly % Title slide only for slidesonly selection.
- \maketitle
- \addtocounter{slide}{-1}
- \slidepagestyle{empty}
- \fi
-\end{slide}
-
-This is a lot of gobbledy-gook intended only to illustrate some of the
-features of seminar.sty.
-
- The phrase information overload rings a bell with just about anyone.
-Certainly you all receive more working papers or more applications for
-graduate school than you can readily read. Nevertheless, the term information
-overload is ill-defined. (\sref{too_much}, top)
-
- A message like this when you check your email conjures up the notion of
-information overload. More generally, information overload always means too
-much information, in some sense or another. But what does ``too much'' mean?
-(\sref{too_much}, bottom) It might just mean that people cannot process all
-the information they receive. That is certainly true for everyone. A claim
-that is much stronger, and that is implicit when people complain about
-informaton overload, is that people {\em should} receive less information, by
-some criterion.
-
-\begin{slide}\label{too_much}%
-\begin{center}
- \large\bf
- Information overload = ``Too much'' information
-\end{center}
-\smallskip
-
-\begin{verse} \bf\tt
- You have 134 unread messages:\\
- Do you want to read them now?
-\end{verse}
-
-\begin{enumerate}
- {\overlay2
- \item People {\overlay1 cannot process all} the information they receive.}
- \item People {\em should} receive less information.
- \end{enumerate}
-\end{slide}
-
- In this paper, I use the term ``information overload'' in both senses.
-(\sref{overload}, bottom). Specifically, I say that an {\em individual} is
-overloaded with information if she receives more information than she can
-process. But I say that there is information overload in a {\em network} if
-there is some mechanism that makes the senders and/or receivers better off by
-restricting the flow of information. This latter notion of information
-overload is an equilibrium property, and it depends on what we mean by
-``better off.''
-
-\begin{slide*}\label{overload}
-\ptsize{12}
-
-\begin{itemize}{\overlay1
- \item There is information {\overlay0 overload in a network if} there is
-some mechanism that, compared to the {\em status quo}, makes the senders
-and/or receivers better off by restricting the flow} of information.'
-
- \item There is information overload in a network if there is some mechanism
-that, compared to the {\em status quo}, makes the senders and/or receivers
-better off by restricting the flow of information.
-\end{itemize}
-
-\end{slide*}
-
-(\sref{questions})
- The purpose of my paper is to show why there can be information overload in
-a network and what kind of mechanisms can make the receivers and/or senders
-better off. Since the cost of communication is one factor that restricts
-communication, I am thus also going to look at how the welfare of the senders
-and receivers depends on the cost of communication.
-
- Most messages don't become jumbled and we can choose which ones to process.
-But some of us may have a bias towards choosing to process more information
-than we should, like the graduate student who feels compelled to read every
-article on the usual lengthy reading list, and just ends up getting confused
-and ruffling through the papers.
-
-
-\begin{slide}[7.3in,5.5in] \label{questions}
-\heading{Questions}
-
-\begin{itemize}
- {\overlay1 \item When could {\blue there be overload} in networks?}
- \item What mechanims make the receivers and senders better off?
- \item How does the welfare {\red of the senders} and receivers depend on the
-cost of communication?
-\end{itemize}
-\end{slide}
-
-
-However, experiments in consumer research and psychology have failed to find
-that such a bias is prevalent. This is in spite of the fact that it is common
-for stress and cognitive strain to increase with information load. We may
-incur such stress and strain because the information we choose to process is
-valuable to us.
-
-More commonly, then, we can and do choose to process roughly as much
-information as we can handle efficiently. This is called screening. But when
-we choose which messages to begin to process, we're ignorant of their
-contents, since otherwise there would be no reason to process them in the
-first place. Therefore, if we receive more junk mail, then some of the
-important mail gets crowded out, and we are effectively less informed.
-
-\begin{slide} \label{informed}
-\begin{center}
- {\bf Being more informed} \par
- \smallskip
- is always better,\par
- \medskip
- \overlay1{but it's not the same as \par
- \smallskip
- {\bf receiving more information}}
-\end{center}
-\end{slide}
-
- Why would the senders communicate too many messages in the first place? If I
-present too much material in this seminar, you have to choose which parts to
-ignore and I would rather make that decision myself, since I know what I most
-want to get across. Thus, it is in my interest not to overload you with
-information. Generally, whenever there is a single sender of messages, that
-sender will prefer to screen rather than have the receiver screen, because the
-sender has an interest in which messages the receiver processes.
-But when there are more senders, one sender's messages tend to crowd out the
-messages of the other senders, as in this example here. If the senders don't
-take this external cost into account when sending messages, they may
-collectively overload the receiver. (\sref{akbar})
-
-There are several reasons that our scarcity of attention, that is, our limited
-capacity to process information, can mean that we become less informed when we
-receive more information. I have a cartoon here to illustrate these reasons.
-(\sref{akbar})
-
-\begin{slide}\label{akbar}\def\slidefuzz{15pt}
- {\large A tax $\tau$ on communication is said to support
-$\tilde{\cal{X}}(c)$ if $\tilde{\cal{X}}(c)$ is an equilibrium for
-$\Gamma(c+\tau)$.}
-\medskip
-
- {\bf Proposition 6.} {\em Assume $\tilde{\cal{X}}(c)$ is not an equilibrium
-for $\Gamma(c)$.\vspace{-3pt}
-\begin{enumerate}
- \item If $\mbox{supp}(\gamma)=[0,1]^n$, there is no tax that supports
-$\tilde{\cal{X}}(c)$.
- \item If $\mbox{supp}(\gamma)=S^{n-1}$, there is a tax that supports
-$\tilde{\cal{X}}(c)$ if and only if $m=1$, $p_j>c\, \forall j$, and
- \begin{enumerate}
- \item $n=2$; or
- \item $n=3$ and $p_i^{-1}+p_j^{-1}\geq p_k^{-1}$ for all distinct
-$i,j,k$; or
- \item $n=4$ and $p_1=p_2=p_3=p_4$.
-\end{enumerate}
-\end{enumerate}}
-\end{slide}
-
- If, by restricting communication, we eliminate the less relevant messages,
-then we can become more informed. But how can we achieve this? Restricting the
-flow of information shifts the task of screening messages from the receivers
-to the senders. Unlike the receivers, the senders do know the contents of the
-messages they originate. If the senders' interests coincide with those of the
-receiver and if the senders have sufficient knowledge about the receivers,
-then the senders will choose the messages which are most relevant to the
-receivers. This may make the receivers, and even the senders, better off.
-
- The network in Slide \ref{architectures} attains the minimal delay $c(8,24)
-= 6$ using 8 processors. It is an example of the efficient one-shot networks
-described by Foo. We will focus on a class of networks that are similar to the
-Foo networks but that may differ slightly. For $q$, $c$ and $n$ such that $1
-\leq q \leq \lfloor n/2 \rfloor$ and $c(q,n) \leq c \leq n$, let $R_{nqc}$ be
-the class of essential networks for adding $n$ items using $q$ processors in
-$c$ cycles that have the following properties:
-
-\begin{slide*}\label{architectures}
-\heading{Architecture}
-
-\begin{center}
-\setlength{\unitlength}{1.65in}
-\begin{picture}(1.1,1.6)(3.5,5.0)
-\put(4.0,6.5){\circle*{.04}}
-\put(4.1,6.5){1}
-\put(4.0,6.0){\circle*{.04}}
-\put(4.1,6.0){2}
-\put(4.0,6.1){\vector(0,1){.3}}
-\put(3.5,6.0){\circle*{.04}}
-\put(3.6,6.0){3}
-\put(3.6,6.1){\vector(1,1){.3}}
-\put(4.0,5.5){\circle*{.04}}
-\put(4.1,5.5){4}
-\put(4.0,5.6){\vector(0,1){.3}}
-\put(4.5,6.0){\circle*{.04}}
-\put(4.6,6.0){5}
-\put(4.4,6.1){\vector(-1,1){.3}}
-\put(4.5,5.5){\circle*{.04}}
-\put(4.6,5.5){6}
-\put(4.4,5.6){\vector(-1,1){.3}}
-\put(3.5,5.5){\circle*{.04}}
-\put(3.6,5.5){7}
-\put(3.5,5.6){\vector(0,1){.3}}
-\put(4.0,5.0){\circle*{.04}}
-\put(4.1,5.0){8}
-\put(4.0,5.1){\vector(0,1){.3}}
-\end{picture}
-\end{center}
-\end{slide*}
-
-Why would the senders communicate too many messages in the first place? If I
-present too much material in this seminar, you have to choose which parts to
-ignore and I would rather make that decision myself, since I know what I most
-want to get across. Thus, it is in my interest not to overload you with
-information.
-
-Generally, whenever there is a single sender of messages, that sender will
-prefer to screen rather than have the receiver screen, because the sender has
-an interest in which messages the receiver processes. But when there are more
-senders, one sender's messages tend to crowd out the messages of the other
-senders, as in this example here. If the senders don't take this external cost
-into account when sending messages, they may collectively overload the
-receiver. (\sref{architectures})
-
-\end{document}
-%% END semsamp2.tex
diff --git a/macros/latex/contrib/seminar/doc/semsamp3.pdf b/macros/latex/contrib/seminar/doc/semsamp3.pdf
deleted file mode 100644
index 96b83e558a..0000000000
--- a/macros/latex/contrib/seminar/doc/semsamp3.pdf
+++ /dev/null
Binary files differ
diff --git a/macros/latex/contrib/seminar/doc/semsamp3.tex b/macros/latex/contrib/seminar/doc/semsamp3.tex
deleted file mode 100644
index 3d6b5923a9..0000000000
--- a/macros/latex/contrib/seminar/doc/semsamp3.tex
+++ /dev/null
@@ -1,68 +0,0 @@
-\listfiles
-%%
-%% Ein Beispiel der DANTE-Edition
-%%
-%%
-%% Copyright (C) 2012 Herbert Voss
-%%
-%% It may be distributed and/or modified under the conditions
-%% of the LaTeX Project Public License, either version 1.3
-%% of this license or (at your option) any later version.
-%%
-%% See http://www.latex-project.org/lppl.txt for details.
-%%
-%%
-%% ====
-% Show page(s) 1,3
-%%
-\documentclass[landscape,rules]{exaseminar}
-\pagestyle{empty}
-\setlength\textwidth{172.40709pt}
-% use **dvips -T 297mm,210mm <file>**!
-\usepackage[utf8]{inputenc}
-\usepackage[scaled]{helvet}
-\def\FileDate{June 2002}
-\def\FileInfoB{Backgrounds}
-\def\FileVersion{1.0}
-\StartShownPreambleCommands
-\documentclass{seminar}
-\usepackage{sem-dem}% General utility macros
-\HyperSetUp\hypersetup{pdfpagemode=UseOutlines}% Open the document with bookmarks shown
-\newcommand\MySeminarOutlinePresentation{%
- \SeminarOutlinePresentation{Where we are}{LightBlue}{RoyalBlue}{yellow}%
- \SeminarHeader{\LARGE\HLe{Demonstration of \MakeLowercase{\FileInfoB}}}}
-\VerbatimFootnotes % To allow verbatim material in footnotes
-\StopShownPreambleCommands
-\begin{document}
-\SeminarFirstSlide \SeminarListOfSlides
-\renewcommand{\slidestretch}{1}% Komprimieren der Zeilen
-\begin{slide}
- \slideheading{Introduction}
- \begin{dinglist}{\DingListSymbolA}
- \item The \emph{full screen} backgrounds, which are the ones well suited
- for screen presentations, are managed by the
- \Verb+\SeminarNewSlideFrameBackground+ and
- \Verb+\SeminarSlideFrameBackground+ macros.\footnote{They are built on the
- model of the \Verb[fontsize=\footnotesize]+\newslideframe+ and
- \Verb[fontsize=\footnotesize]+\slideframe+ ones, which cannot be used for
- this goal (there is a design incompatibility in the management of the
- slide headers).}
-
- \item We can overlap several partial \emph{backgrounds} with the
- `\textsf{fancybox}' package (using it \Verb+\boxput+ macro), calling the
- \Verb+\slideframe[*]+ macro, eventually several times (see the
- \HLe{Seminar} documentation and FAQ). See examples on
- slide~12 and in the file \href{file:sem-dem2.pdf}{sem-dem2.pdf}.
-
- \item We show here several kinds of backgrounds:
- \begin{dinglist}{\DingListSymbolB}\setlength{\labelwidth}{4mm}
- \item \HLe{solid} backgrounds,
- \item \HLe{gradient} backgrounds, using the \textsf{pst-grad} PSTricks package,
- \item \HLe{gradient} backgrounds, using the \textsf{pst-slpe} PSTricks package,
- \item \HLe{composite} backgrounds, based on PSTricks graphics (you can
- obviously rather use the others \AllTeX{} packages for algorithmic graphics),
- \item backgrounds with \HLe{external images}.
- \end{dinglist}
- \end{dinglist}
-\end{slide}
-\end{document}
diff --git a/macros/latex/contrib/seminar/doc/tvz-code.sty b/macros/latex/contrib/seminar/doc/tvz-code.sty
deleted file mode 100644
index 68a52701aa..0000000000
--- a/macros/latex/contrib/seminar/doc/tvz-code.sty
+++ /dev/null
@@ -1,291 +0,0 @@
-%% BEGIN tvz-code.sty
-%% 93/04/01
-%% Tim Van Zandt Timothy.VAN-ZANDT@insead.edu
-%%
-%% Lousy hacks for typesetting the documented code for the
-%%
-%% This file may be distributed and/or modified under the conditions of
-%% the LaTeX Project Public License, either version 1.2 of this license
-%% or (at your option) any later version. The latest version of this
-%% license is in:
-%%
-%% http://www.latex-project.org/lppl.txt
-%%
-%% and version 1.2 or later is part of all distributions of LaTeX version
-%% 1999/12/01 or later.
-%%
-%% seminar.sty and PSTricks packages.
-
-\input tvz-hax.sty
-\input doc.sty % Tested with v1.7k
-\input art11.sty
-
-
-%%%%%%%%%%%%%%%%%%% PAGE PARAMETERS %%%%%%%%%%%%%%%%%%%%%%%%%%
-
-% Paragraphs are marked by space rather than indentation:
-\parindent 0pt
-\parskip 4pt plus 1pt minus 1pt
-
-% Textwidth just wide enough for 78 characters of code.
-\setbox\@tempboxa=\hbox{\small\tt f}
-\textwidth 78\wd\@tempboxa
-\oddsidemargin\paperwidth\relax
-\advance\oddsidemargin -\textwidth
-\divide\oddsidemargin 2
-\advance\oddsidemargin -1in
-\setbox\@tempboxa=\hbox{\tiny 999\ }
-\advance\oddsidemargin\wd\@tempboxa
-\evensidemargin\oddsidemargin
-
-\if@twoside
- \advance\oddsidemargin .3in
- \advance\evensidemargin -.3in
-\fi
-
-% No headers, 1in top margin
-\topmargin 0pt
-\headheight 0pt
-\headsep 0pt
-
-% Total bottom margin 1in, text height 9in
-\textheight 9in
-\footskip .625in
-
-% Now adjust for different paper size:
-\@tempdima=\paperheight
-\advance\@tempdima-11in
-\divide\@tempdima 2
-\advance\topmargin \@tempdima
-
-% Marginal notes always on left.
-\marginparwidth 3.5cm
-\marginparsep .5cm
-\reversemarginpar
-
-
-%%%%%%%%%%%%%%%%%%% MACROCODE PATCH FOR SHORT META %%%%%%%%%%%
-
-\expandafter\def\expandafter\macrocode\expandafter{%
- \expandafter\DeleteShortMeta
- \macrocode}
-
-%%%%%%%%%%%%%%%%%%%% DOC PREAMBLE %%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
-\newbox\junkbox
-\def\DocInput#1{%
- \MakePercentIgnore
- \setbox\junkbox=\hbox\bgroup
- \input{#1}%
- \MakePercentComment}
-\let\EndDocPreamble\egroup
-
-%%%%%%%%%%%%%%%%%%%%%%%%%%% VERBATIM %%%%%%%%%%%%%%%%%%%%%%%%%
-
-% Use fancybox.sty's LVerbatim environment. Each line should contain
-% percent plus three spaces (or other char), including blank lines. E.g.,
-% \begin{LVerbatim}
-% foo
-% bar
-% \end{LVerbatim}
-
-\def\EveryVerbatimLine#1#2#3#4{}
-\begingroup
- \catcode`\%=12
- \catcode`\ =\active
- \global\EndVerbatimTokens{% }
-\endgroup
-\AltGetVerbatim
-
-
-%%%%%%%%%%%%%%%%%% INDEXING %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
-% Things are faster without \MakeIndex
-
-\def\MakeIndex{\makeindex\EnableCrossrefs}
-\DisableCrossrefs
-
-% Use \codelabel[int]{foo} to label last line of code plus int.
-% E.g., to label first and then last line of some code:
-% \codelabel[1]{foo}
-% \begin{macrocode}
-% foo
-% bar
-% \end{macrocode}
-% \codelabel{foo}
-
-\def\codelabel{\@ifnextchar[{\@codelabel}{\@codelabel[0]}}
-\def\@codelabel[#1]#2{%
- \@bsphack
- \begingroup
- \advance\c@CodelineNo #1
- \def\@currentlabel{\the\c@CodelineNo}%
- \label{#2}%
- \endgroup
- \@esphack}
-
-% Definitions in code are indexed by page number, but other occurences
-% are indexed by the line of code.
-
-\CodelineIndex
-\def\SpecialMainPageIndex#1{%
- {\let\special@index\index\SpecialMainIndex{#1}}}
-\renewcommand{\theCodelineNo}{{\rm\tiny\arabic{CodelineNo}}}
-
-% Index numbers for main definitions are set in bold rather than underlined.
-
-\def\main#1{{\bf #1}}
-
-% two column index
-
-\setcounter{IndexColumns}{2}
-
-% Customize index prologue:
-
-\def\index@prologue{%
- \section*{Index}\markboth{Index}{Index}%
- \addcontentsline{toc}{section}{Index}%
- The {\bf bold} numbers denote the pages where the entries are defined,
- and all other numbers indicate the {\em lines of code} where
- the entries are used.}
-
-
-%%%%%%%%%%%%%%%%%%%%%%%%%% MACRO %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
-% A change to the macro environment; prints macro names within the margins
-% of the text, instead of as marginal notes. Use one \macro command,
-% with comma separated macro names.
-
-\newif\iffirst@macroname
-\newif\ifnestedmacro
-
-\def\macro{%
- \ifnum\macro@level=\z@
- \def\next{\MakePrivateLetters \m@cro@}%
- \else
- \def\next{\@latexerr{Nested \string\begin{macro}}\@eha
- \endgroup\end{macro}\macro@level=\z@\begin{macro}}
- \fi
- \next}
-\def\m@cro@#1{%
- \first@macronametrue
- \m@@cro@@#1,\@nil,}
-\def\m@@cro@@#1,{%
- \def\@tempa{#1}\def\@tempb{\@nil}%
- \ifx\@tempa\@tempb
- \let\next\finishm@@cro@@
- \else
- {\advance\c@CodelineNo\@ne\SpecialMainPageIndex{#1}\nobreak}%
- \DoNotIndex{#1}%
- \iffirst@macroname
- \edef\saved@macronames{\string#1}%
- \first@macronamefalse
- \else
- \def\comma{\noexpand\comma}%
- \edef\saved@macronames{\saved@macronames\comma\string#1}%
- \fi
- \let\next\m@@cro@@
- \fi
- \next}
-\def\finishm@@cro@@{%
- \advance\macro@level\@ne
- \def\comma{{\rm, }}%
- \ListMacroNames{\saved@macronames}}
-
-\let\endmacro\relax
-
-\def\ListMacroNames{%
- \@startsection{subsubsection}{3}{\z@}{-2.25ex plus -.5ex minus-.2ex}%
- {1.3ex plus.2ex}{\csname reset@font\endcsname\large\tt}*}
-
-\MacroIndent 0pt
-
-\def\MacroFont{\small\tt}
-
-
-%%%%%%%%%%%%%%%%%%%%% DoNot Index %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
-\DoNotIndex{\ ,\!,\[,\\,\],\^,\`,\{,\},\~}
-\DoNotIndex{\@warning,\active}
-\DoNotIndex{\begingroup,\catcode,\char,\csname,\def,\do}
-\DoNotIndex{\docdate,\dospecials,\edef,\else,\endcsname,\endgroup}
-\DoNotIndex{\expandafter,\fi,\filedate,\fileversion}
-\DoNotIndex{\gdef,\if,\ifcat}
-\DoNotIndex{\ifx,\immediate,\lccode,\let}
-\DoNotIndex{\lowercase,\next,\noexpand}
-\DoNotIndex{\relax,\space,\the}
-\DoNotIndex{\toks@,\typeout,\write}
-\DoNotIndex{\@M,\@arabic,\@author,\@auxout,\@bsphack,\@car,\@date}
-\DoNotIndex{\@dblarg,\@dblfloat,\@eha,\@empty,\@esphack,\@evenfoot}
-\DoNotIndex{\@evenhead,\@float,\@gobble,\@gobbletwo,\@gtempa,\@ifnextchar}
-\DoNotIndex{\@ifundefined,\@ixpt,\@latexerr,\@listI,\@listi,\@listii}
-\DoNotIndex{\@listiii,\@listiv,\@listv,\@listvi,\@makefnmark,\@mkboth}
-\DoNotIndex{\@namedef,\@nameuse,\@mne,\@nil,\@normalsize,\@oddfoot}
-\DoNotIndex{\@oddhead,\@tempa,\@tempb,\@tempc,\@tempd}
-\DoNotIndex{\@tempdima,\@testfalse,\@testtrue,\test@member}
-\DoNotIndex{\@thanks,\@thefnmark,\@title}
-\DoNotIndex{\@topnum,\@viiipt,\@viipt,\@vipt,\@vpt,\@xiipt}
-\DoNotIndex{\@xipt,\@xpt,\@xivpt,\@xviipt,\@xxpt,\@xxvpt}
-\DoNotIndex{\addcontentsline}
-\DoNotIndex{\advance,\aftergroup,\baselinestretch,\begin}
-\DoNotIndex{\belowdisplayshortskip,\belowdisplayskip,\bf,\bgroup}
-\DoNotIndex{\box,\c@@page,\c@page,\c@secnumdepth,\clearpage,\columnsep}
-\DoNotIndex{\columnwidth,\copy,\dimen@,\dimen@i,\dimen@ii,\divide}
-\DoNotIndex{\dp,\ds@article,\ds@notes,\ds@notesonly}
-\DoNotIndex{\ds@slidesonly,\egrou,\end,\end@dblfoloat,\end@float}
-\DoNotIndex{\endinput,\fnsymbol,\footheight,\footnotesep,\footskip}
-\DoNotIndex{\global,\globaldefs,\hbox,\headheight,\headsep,\hfil}
-\DoNotIndex{\hrule,\hskip,\hss,\ht,\Huge,\huge}
-\DoNotIndex{\if@filesw,\if@test,\if@twocolumn,\if@twoside}
-\DoNotIndex{\ifcase,\ifdim,\ifvmode,\ignorespaces}
-\DoNotIndex{\input,\interlinepenalty,\itemsep,\ixpt,\label}
-\DoNotIndex{\labelsep,\labelwidth,\LARGE,\large,\Large}
-\DoNotIndex{\leavevmode,\leftmargin,\leftmargini,\leftmarginii}
-\DoNotIndex{\leftmarginiii,\leftmarginiv,\leftmarginv}
-\DoNotIndex{\leftmarginvi,\leftmark,\leftskip,\lineskip}
-\DoNotIndex{\magstep,\marginparsep,\marginparwidth,\markboth}
-\DoNotIndex{\markright,\medbreak,\multiply,\newbox,\newcount}
-\DoNotIndex{\newcounter,\newdimen,\newif,\newlabel,\newpage}
-\DoNotIndex{\newtoks,\nobreak,\nointerlineskip,\normallineskip}
-\DoNotIndex{\normalsize,\null,\number,\numberline,\oddsidemargin}
-\DoNotIndex{\offinterlineskip,\or,\par,\parbox,\parskip,\partopsep}
-\DoNotIndex{\prevdepth,\protect,\ref,\refstepcounter,\rightmrk}
-\DoNotIndex{\rm,\scriptsize,\section,\sectionmark,\setbox,\setcounter}
-\DoNotIndex{\sl,\small,\stepcounter,\string,\textheight,\textwidth}
-\DoNotIndex{\thefootnote,\thepage,\thesection,\thesubsection}
-\DoNotIndex{\thispagestyle,\tiny,\topmargin,\topsep,\uppercase}
-\DoNotIndex{\vbox,\vfill,\viiipt,\viipt,\vipt,\vpt,\vskip,\vss}
-\DoNotIndex{\wd,\xcommentloaded@,\xdef,\xiipt,\xipt,\xivpt,\xpt}
-\DoNotIndex{\xviipt,\xxpt,\xxvpt,\z@}
-\DoNotIndex{\abovedisplayskip,\abovedisplayshortskip,\@currentlabel}
-\DoNotIndex{\@dottedtocline,\@ne\@setsize,\@starttoc,\@tempboxa,\@}
-\DoNotIndex{\arraystretch,\centerline,\egroup,\end@dblfloat}
-\DoNotIndex{\evensidemargin,\footnotesize,\ifnum,\parindent,\parsep}
-\DoNotIndex{\rightmark,\@afterindenttrue,\@ne,\if@specialpage.\long}
-\DoNotIndex{\fboxrule,\fboxsep,\@for,\vfil}
-\DoNotIndex{\@@fortmp,\@@tempa,\@@tempb,\@ehd,\@for,\@fortmp,\@m}
-\DoNotIndex{\@mparswitchfalse,\@mparswitchtrue,\@nnil,\@spaces}
-\DoNotIndex{\@specialstyle,\@temptokena,\@twosidefalse,\@twosidetrue}
-\DoNotIndex{\@whilenum,\alph,\arabic,\count@,\errhelp,\errmessage}
-\DoNotIndex{\fbox,\index,\minipage,\newcommand,\overfullrule}
-\DoNotIndex{\pagestyle,\raggedright,\ref@stepcounter,renewcommand}
-\DoNotIndex{\semcolor@loaded,today,\@tempcnta,\@tempcntb,\trivlist,\t,\p}
-\DoNotIndex{\today,\item,\@colht,\@currenvir,\@thefoot,\@thehead}
-\DoNotIndex{\@totalleftmargin,\allowbreak,\@captype,\@footnotetext}
-\DoNotIndex{\@listdepth,\@minipagefalse,\@minipagetrue,\@mpfn,\@mpfootins}
-\DoNotIndex{\endtrivlist,\everypar,\hsize,\ifvoid,\lastskip}
-\DoNotIndex{\linewidth,\skip,\thempfn,\thempfootnote,\topskip,\unvbox}
-\DoNotIndex{\@@input,\@@par,\@acci,\@accii,\@acciii,\@cclv,\@height}
-\DoNotIndex{\@maxdepth,\@tempdimb,\@tempg,\@temph,\@texttop,\@twocolumnfalse}
-\DoNotIndex{\@xfloat,\addvspace,\alloc@,\bigskipamount,\botmark,\chardef}
-\DoNotIndex{\closein,\closeout,\count,\countdef,\dimen,\glossary,\goodbreak}
-\DoNotIndex{\insc@unt,\intextsep,\kern,\mag,\marginpar,\maxdepth,\medskip}
-\DoNotIndex{\moveleft,\newinsert,\newskip,\onecolumn,\openin,\openout}
-\DoNotIndex{\read,\renewcommand,\repeat,\rightskip,\strut,\vfuzz,\voffset}
-\DoNotIndex{\vsize}
-
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
-\endinput
-
-%% END tvz-code.sty
diff --git a/macros/latex/contrib/seminar/doc/tvz-hax.sty b/macros/latex/contrib/seminar/doc/tvz-hax.sty
deleted file mode 100644
index f8a4798fcc..0000000000
--- a/macros/latex/contrib/seminar/doc/tvz-hax.sty
+++ /dev/null
@@ -1,266 +0,0 @@
-%% BEGIN tvz-hax.sty
-%% 93/04/01
-%% Tim Van Zandt Timothy.VAN-ZANDT@insead.edu
-%%
-%% These are some lousy hacks for typesetting the code
-%% and User's Guide in the Seminar and PSTricks packages.
-%%
-%% This file may be distributed and/or modified under the conditions of
-%% the LaTeX Project Public License, either version 1.2 of this license
-%% or (at your option) any later version. The latest version of this
-%% license is in:
-%%
-%% http://www.latex-project.org/lppl.txt
-%%
-%% and version 1.2 or later is part of all distributions of LaTeX version
-%% 1999/12/01 or later.
-%%
-
-
-%%%%%%%%%%%%%%%%%%%%%%%%%% PAPER SIZES %%%%%%%%%%%%%%%%%%%%%%
-
-% Default paper size is 8.5in by 11in.
-% Just include the `a4' style option for A4 paper size.
-% For other paper sizes, define \paperwidth and \paperheight
-% before the \documentstyle command.
-
-\@ifundefined{paperwidth}{\def\paperwidth{8.5in}}{}
-\@ifundefined{paperheight}{\def\paperheight{11in}}{}
-\@namedef{ds@a4}{\def\paperwidth{210mm}\def\paperheight{297mm}}
-
-
-%%%%%%%%%%%%%%%%%%%% INPUTS %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
-\newif\iftwoup
-\@namedef{ds@2up}{\input 2up.tex \twouptrue}
-
-\input article.sty
-\input fancybox.sty % Version 0.93 or later.
-
-\iftwoup
- \if@twoside
- \targetlayout{twosided}
- \fi
-\fi
-
-\if@twoside
- \def\twosideclearpage{%
- \clearpage
- \ifodd\c@page\else
- \thispagestyle{empty}%
- \null\leavevmode
- \clearpage
- \fi}
-\else
- \let\twosideclearpage\clearpage
-\fi
-
-
-%%%%%%%%%%%%%%%%%%%%% MISC %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
-\def\arraystretch{1.2}
-
-\hfuzz 1pt
-
-% Just in case I'm using AmS-LaTeX.
-\def\makeatother{\catcode`\@=12\relax}
-
-
-%%%%%%%%%%%%%%%%%%%%%%%%%% SHORT META %%%%%%%%%%%%%%%%%%%%%%%%
-
-% Works in verbatim environments, unless specially designed.
-\begingroup
- \catcode`\<=\active
- \gdef\ShortMeta{%
- \catcode`\<=\active
- \def<##1>{{\MetaFont ##1\/}}}
-\endgroup
-\def\DeleteShortMeta{\catcode`\<=12\relax}
-\def\MetaFont{\sl} % For meta arguments.
-
-%%%%%%%%%%%%%%%%%%%%%%%%%% FILE VERSIONS %%%%%%%%%%%%%%%%%%%%%
-
-% \GetVersion{file} scans first ten lines of <file> for
-% \filedate and \fileversion definitions.
-%
-% \CheckVersion{file} scans <scans> file for \filedate and \fileversion
-% and then compares these witha \FileDate and \FileVersion.
-%
-\def\GetVersion#1{%
- \immediate\openin1=#1
- \count@=0
- \let\fileversion\relax
- \let\filedate\relax
- \@testtrue
- \loop
- \if@test
- \advance\count@1
- \immediate\read1 to \@tempa
- \@tempa
- \ifnum\count@=10
- \@latexerr{Couldn't find fileversion}\@eha
- \@testfalse
- \else
- \ifx\fileversion\relax
- \@testtrue
- \else
- \ifx\filedate\relax
- \@testtrue
- \else
- \@testfalse
- \fi
- \fi
- \fi
- \repeat}
-
-\def\CheckVersion#1{%
- \GetVersion{#1}
- \ifx\FileVersion\fileversion
- \ifx\FileDate\filedate\else
- \@latexerr{Doc date (\FileDate) and file date (\filedate)
- do not match}\@eha
- \fi
- \else
- \@latexerr{Doc version (\FileVersion) and file version (\fileversion)
- do not match}\@eha
- \fi}
-
-% This expands the date, as defined in \filedate.
-
-\def\expanddate#1/#2/#3/{%
- \number#3{}
- \month=#2
- \ifcase\month\or
- January \or February \or March \or April \or May \or June \or
- July \or August \or September \or October \or November \or December
- \fi
- 19#1}
-\def\thefiledate{\expandafter\expanddate\filedate/}
-\date{\thefiledate}
-
-
-%%%%%%%%%%%%%%%%% LOGOS %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
-\def\AmS{{\protect\the\textfont\tw@
- A\kern-.1667em\lower.5ex\hbox{M}\kern-.125em S}}
-
-\def\b@LaTeX{%
- \begingroup
- \csname reset@font\endcsname
- \rm\bf
- L\kern-.32em
- \raise.36ex\hbox{%
- \ifx\@currsize\Huge\LARGE\else
- \ifx\@currsize\huge\Large\else
- \ifx\@currsize\LARGE\large\else
- \ifx\@currsize\Large\normalsize\else
- \ifx\@currsize\large\small\else
- \ifx\@currsize\normalsize\footnotesize\else
- \ifx\@currsize\small\scriptsize\else
- \ifx\@currsize\footnotesize\scriptscriptsize
- \fi\fi\fi\fi\fi\fi\fi\fi
- \bf A}%
- \kern-.15em
- T\kern-.1667em
- \lower.7ex\hbox{E}\kern-.125em
- X%
- \endgroup}
-\def\bLaTeX{\b@LaTeX}
-
-
-%%%%%%%%%%%%%%% PAGE STYLE %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
-% The `docheadings' page style uses footers rather than headers.
-
-\def\ps@docheadings{%
- \let\@mkboth\markboth
- \def\@oddhead{}%
- \let\@evenhead\@oddhead%
- \def\@oddfoot{%
- \small\sf
- \rightmark
- \hfil
- \thepage}%
- \def\@evenfoot{%
- \small\sf
- \thepage
- \hfil
- \theheadertitle}%
- \def\sectionmark##1{\markright {##1}}}%
-\pagestyle{docheadings}
-
-
-%%%%%%%%%%%%%%%%%%%%%%%% Table of Contents %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
-% Tighten up spacing in TOC:
-
-\newskip\tempskip
-\def\TOCshrink{.5}
-\def\TableOfContents{%
- \begin{quote}
- \begin{center} \Large\bf Contents \end{center}
- \def\numberline##1{\hbox to 0pt{\hss##1\hskip 1em}}%
- \let\oldaddvspace\addvspace
- \def\addvspace##1{%
- \tempskip##1\relax
- \oldaddvspace{\TOCshrink\tempskip}}
- \@starttoc{toc}%
- \end{quote}}
-\def\tableofcontents{%
- \clearpage
- \markright{Table of contents}%
- \TableOfContents
- \clearpage}
-
-
-%%%%%%%%%%%%%%%%%%%%%%%% code and examples %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
-% `Ex' is an environment for putting samples of code.
-% It is a variant of
-% \begin{quote}\tt ... \end{quote}.
-% It is NOT verbatim.
-
-\def\NotNested{%
- \def\begin##1{%
- \@latexerr{Bad nesting of environments.
- Perhaps missing \end{\@currenvir}}\@eha
- \end{\@currenvir}%
- \begin{##1}}}
-
-\def\Ex{%
- \NotNested
- \list{}{}\item[]%
- \if@minipage\else\vskip\parskip\fi
- \leftskip\@totalleftmargin
- \rightskip\z@
- \parindent\z@
- \parskip\z@
- \parfillskip\@flushglue
- \hfuzz 1pt
- \@@par
- \global\@inlabelfalse}
-\def\endEx{\endlist}
-
-% Various things to make it easier to write code and examples:
-
-\begingroup
- \catcode`\{=12 \catcode`\}=12
- \catcode`\(=1 \catcode`\)=2
- \catcode`\+=0 \catcode`\\=12
- +gdef+|(\) % \| = character \
- +gdef+{({) % \{ = character {
- +gdef+}(}) % \} = character }
-+endgroup
-\def\Backslash{\protect\|}
-
-% Define some functional font commands:
-
-\def\MainFont{\tt} % For macro definitions.
-\def\UsageFont{\tt} % For in-line macro names.
-\def\InlineFont{\tt} % For other in-line snipets of code.
-\def\DisplayFont{\tt} % For displayed code.
-
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
-\endinput
-%% END tvz-hax.sty
diff --git a/macros/latex/contrib/seminar/doc/tvz-user.sty b/macros/latex/contrib/seminar/doc/tvz-user.sty
deleted file mode 100644
index f203fa2cf3..0000000000
--- a/macros/latex/contrib/seminar/doc/tvz-user.sty
+++ /dev/null
@@ -1,215 +0,0 @@
-%%
-%% This file may be distributed and/or modified under the conditions of
-%% the LaTeX Project Public License, either version 1.2 of this license
-%% or (at your option) any later version. The latest version of this
-%% license is in:
-%%
-%% http://www.latex-project.org/lppl.txt
-%%
-%% and version 1.2 or later is part of all distributions of LaTeX version
-%% 1999/12/01 or later.
-%%
-%% BEGIN tvz-user.sty
-%% 93/04/01
-
-\input tvz-hax.sty
-
-\def\papersizeadjust{%
- \@tempdima=\paperwidth\relax
- \advance\@tempdima-8.5in
- \divide\@tempdima 2
- \advance\oddsidemargin\@tempdima
- \advance\evensidemargin\@tempdima
- \@tempdima=\paperheight
- \advance\@tempdima-11in
- \divide\@tempdima 2
- \advance\topmargin\@tempdima}
-
-\begingroup
- \catcode`\"=\active
- \gdef\ShortVerb{%
- \catcode`\"=\active
- \def"{\Verb"}}%
- \gdef\DeleteShortVerb{\catcode`\"=12\relax}
-\endgroup
-
-% Paragraphs are marked by large space rather than indentation:
-\setlength{\parindent}{0pt}
-\setlength{\parskip}{7pt plus 1pt minus 1pt}
-
-% Reduce \topsep:
-\def\@listI{%
- \leftmargin\leftmargini
- \parsep 5\p@ plus2.5\p@ minus\p@
- %\topsep 10\p@ plus4\p@ minus6\p@
- \topsep 5\p@ plus2\p@ minus2\p@
- \itemsep 5\p@ plus2.5\p@ minus\p@}
-\let\@listi\@listI
-\@listi
-\def\@listii{%
- \leftmargin\leftmarginii
- \labelwidth\leftmarginii
- \advance\labelwidth-\labelsep
- %\topsep 5\p@ plus2.5\p@ minus\p@
- \topsep 2\p@ plus.5\p@ minus\p@
- \parsep 2.5\p@ plus\p@ minus\p@
- \itemsep \parsep}
-\def\@listiii{%
- \leftmargin\leftmarginiii
- \labelwidth\leftmarginiii
- \advance\labelwidth-\labelsep
- %\topsep 2.5\p@ plus\p@ minus\p@
- \topsep 1\p@ plus.2\p@ minus.2\p@
- \parsep \z@
- \partopsep \p@ plus\z@ minus\p@
- \itemsep \topsep}
-
-\skip\footins 20pt plus 4pt minus 2pt
-
-%%%%%%%%%%%%%%%%%%%%%%% Special hacks for User's Guides %%%%%%%%%%%%%%%%%%%%%
-%%
-%% Listing questions
-\newcounter{faq}[section]
-\def\thefaq{\arabic{faq}}
-\let\l@faq\@gobbletwo
-\def\faq{\@startsection{faq}{2}{\z@}%
- {3.25ex plus 1ex minus .2ex}{1.5ex plus .2ex}{\faqfont}}
-\def\faqfont{\normalsize\sf}
-\def\faqmark#1{}
-%%
-%% Listing errors
-\def\error{\vskip 2ex\noindent}
-%%
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
-\@ifundefined{AmSTeX}
- {\def\AmSTeX{\leavevmode\hbox{$\cal A\kern-.2em\lower.376ex%
- \hbox{$\cal M$}\kern-.2em\cal S$-\TeX}}}{}
-\@ifundefined{BibTeX}
- {\def\BibTeX{{\rm B\kern-.05em{\sc i\kern-.025em b}\kern-.08em%
- T\kern-.1667em\lower.7ex\hbox{E}\kern-.125emX}}}{}
-\@ifundefined{SliTeX}
- {\def\SliTeX{{\rm S\kern-.06emL\kern-.18em\raise.32ex\hbox
- {\sc i}\kern -.03em\TeX}}}{}
-\@ifundefined{PlainTeX}{\def\PlainTeX{{\sc Plain}\kern2pt\TeX}}{}
-
-%%%%%%%%%%%%%%% Special indexing for User's Guides %%%%%%%%%%%%%%%%%%%%%%%%%
-%%
-%%
-\@ifundefined{actualchar}{\def\actualchar{@}}{}
-\@ifundefined{quotechar}{\def\quotechar{"}}{}
-\@ifundefined{levelchar}{\def\levelchar{!}}{}
-\@ifundefined{encapchar}{\def\encapchar{|}}{}
-\@ifundefined{verbatimchar}{\def\verbatimchar{+}}{}
-%%
-%% These are the indexing commands:
-%%
-%% Commands: \MainIndex \UsageIndex
-%% Environments: \MainEnvIndex \UsageEnvIndex
-%% Style options: \MainOptionIndex \UsageOptionIndex
-%% Counters: \MainCntIndex \UsageCntIndex
-\def\@Index#1{\@bsphack\index{#1}\@esphack}
-\def\Index#1#2{%
- \@bsphack
- \index{\expandafter\@gobble\string#2\actualchar\string
- \verb\quotechar*\verbatimchar\string#2\verbatimchar
- \encapchar #1}}
-{\catcode`\!=0 !catcode`!\=12!gdef!special@gobble#1{!if\#1!else#1!fi}}
-\def\MainIndex{\Index{main}}
-\def\UsageIndex{\Index{usage}}
-\def\SpecialIndex#1#2#3{%
- \@Index{#3\actualchar{\tt #3} (#1)\encapchar #2}%
- \@Index{#1s:\levelchar{\tt #3}\encapchar #2}}
-\def\MainEnvIndex{\SpecialIndex{environment}{main}}
-\def\UsageEnvIndex{\SpecialIndex{environment}{usage}}
-\def\MainOptionIndex{\SpecialIndex{option}{main}}
-\def\UsageOptionIndex{\SpecialIndex{option}{usage}}
-\def\MainCntIndex{\SpecialIndex{counter}{main}}
-\def\UsageCntIndex{\SpecialIndex{counter}{usage}}
-%%
-%% Font for index page numbers:
-\def\main#1{{\bf #1}}
-\def\usage#1{{#1}}
-%%
-%% These combine various functions:
-%%
-%% Commands: \Main \Usage
-%% Environments: \MainEnv \UsageEnv
-%% Style options: \MainOption \UsageOption
-%% Counters: \MainCnt \UsageCnt
-%%
-%% The "Main" ones
-%% * Index argument.
-%% * Print argument with \MainFont
-%% * Create label +foo, e+foo or o+foo.
-%%
-%% The "Usage" ones
-%% * Index argument.
-%% * Print argument with \UsageFont.
-%%
-\def\SpecialLabel#1#2+{\label{+#2}}
-\def\LabelIndex#1{\MainIndex{#1}\expandafter\SpecialLabel\string#1+}
-\def\Main#1{%
- \MainIndex{#1}%
- \expandafter\SpecialLabel\string#1+%
- {\MainFont\string#1}}
-\def\Usage#1{\UsageIndex{#1}{\UsageFont\string#1}}
-\def\MainEnv#1{%
- \MainEnvIndex{#1}%
- \label{e+#1}%
- {\MainFont #1}}
-\def\UsageEnv#1{\UsageEnvIndex{#1}{\UsageFont #1}}
-\def\MainOption#1{%
- \MainOptionIndex{#1}%
- \label{o+#1}%
- {\MainFont #1}}
-\def\UsageOption#1{\UsageOptionIndex{#1}{\UsageFont #1}}
-\def\MainCnt#1{%
- \MainCntIndex{#1}%
- \label{c+#1}%
- {\MainFont #1}}
-\def\UsageCnt#1{\UsageCntIndex{#1}{\UsageFont #1}}
-%%
-%% These are abbreviations.
-%%
-\def\N{\Main}
-\def\n{\Usage}
-\def\E{\MainEnv}
-\def\e{\UsageEnv}
-\def\O{\MainOption}
-\def\o{\UsageOption}
-\def\C{\MainCnt}
-\def\c{\UsageCnt}
-%%
-%% This is for listing commands in a description environment.
-\def\xitem#1{\item[\Main{#1}]}
-%%
-%%
-\renewcommand{\EveryVerbatimLine}[2]{}
-\VerbatimFootnotes
-
-%% User's guide and documented code have different index prologue.
-\def\PrintUserIndex{{\let\ps@plain\@empty\@input{\jobname.ind}}}
-
-\begingroup
- \catcode`\<=1 \catcode`\>=2
- \catcode`\{=13 \catcode`\}=12
- \catcode`\[=13
- \gdef\@MD<%
- \catcode`\{=13 \catcode`\}=12 \catcode`\[=13
- \def{##1}<\{<\MetaFont ##1\/>\}>%
- \def[##1]<\string[<\MetaFont ##1\/>]>>
-\endgroup
-\def\MD{%
- \NotNested
- \Ex
- \begingroup
- \@MD
- \def\end{\par\endgroup\end}%
- \def\\{\@centercr\Main}%
- \MainFont
- \Main}
-\def\endMD{\endEx}
-
-\endinput
-%% END tvz-user.sty