summaryrefslogtreecommitdiff
path: root/macros/latex/contrib/mylatexformat
diff options
context:
space:
mode:
authorNorbert Preining <norbert@preining.info>2019-09-02 13:46:59 +0900
committerNorbert Preining <norbert@preining.info>2019-09-02 13:46:59 +0900
commite0c6872cf40896c7be36b11dcc744620f10adf1d (patch)
tree60335e10d2f4354b0674ec22d7b53f0f8abee672 /macros/latex/contrib/mylatexformat
Initial commit
Diffstat (limited to 'macros/latex/contrib/mylatexformat')
-rw-r--r--macros/latex/contrib/mylatexformat/README44
-rw-r--r--macros/latex/contrib/mylatexformat/mylatexformat.dtx991
-rw-r--r--macros/latex/contrib/mylatexformat/mylatexformat.pdfbin0 -> 201411 bytes
3 files changed, 1035 insertions, 0 deletions
diff --git a/macros/latex/contrib/mylatexformat/README b/macros/latex/contrib/mylatexformat/README
new file mode 100644
index 0000000000..3a738ff5c3
--- /dev/null
+++ b/macros/latex/contrib/mylatexformat/README
@@ -0,0 +1,44 @@
+Use mylatexformat.ltx to make a format based on the preamble
+of any LaTeX file.
+
+The use of formats helps to speed up compilations: packages which have been
+dumped in the format are loaded at very high speed. This is useful when a
+document load many packages (pgf-TikZ among other...)
+
+For the creation of the format use a command line like:
+
+etex -initialize [opts] "&pdflatex" mylatexformat.ltx """abc.tex"""
+
+mylatexformat.ltx has been primarily written from mylatex.ltx
+(available on CTAN under the contrib/Carlisle/ directory) but
+gets rid of many limitations or problems of mylatex.ltx.
+
+More precisely:
+
+- The format is created from the beginning of the file (usually
+ \documentclass[...]{...}
+ until either:
+ ~ \begin{document}
+ ~ \endofdump
+ if \endofdump is encountered in the preamble
+ ~ \csname endofdump\endcsname
+ for convenience: to avoid `undefined control sequence'
+ in case the document is compiled without the format.
+
+- \begin{document} \endofdump or \csname endofdump\endcsname
+ can be precedeed or followed by other macros or commentaries.
+
+- Commentaries in the preamble are ignored (braces are not required
+ to be equilibrated).
+
+- packages that modify the \document macro (like auxhook.sty or
+ etoolbox.sty) can be included in the format.
+
+- A report is available in the .log file.
+
+I have been using mylatexformat.ltx with MikTeX under:
+ - pdfTeX in dvi mode
+ - pdfTeX in pdf mode
+ - XeTeX
+
+Comments about its use on other system are welcome ! \ No newline at end of file
diff --git a/macros/latex/contrib/mylatexformat/mylatexformat.dtx b/macros/latex/contrib/mylatexformat/mylatexformat.dtx
new file mode 100644
index 0000000000..05d5d7e8cd
--- /dev/null
+++ b/macros/latex/contrib/mylatexformat/mylatexformat.dtx
@@ -0,0 +1,991 @@
+% \iffalse meta-comment
+% mylatexformat : 2011/02/12 v3.4 - Use mylatexformat.ltx to make a format based on the preamble of any LaTeX file]
+%
+% This work may be distributed and/or modified under the
+% conditions of the LaTeX Project Public License, either
+% version 1.3 of this license or (at your option) any later
+% version. The latest version of this license is in
+% http://www.latex-project.org/lppl.txt
+%
+% This work consists of the main source file mylatexformat.dtx
+% and the derived files
+% mylatexformat.ltx, mylatexformat.pdf, mylatexformat.ins
+%
+% Unpacking:
+% (a) If mylatexformat.ins is present:
+% etex mylatexformat.ins
+% (b) Without mylatexformat.ins:
+% etex mylatexformat.dtx
+% (c) If you insist on using LaTeX
+% latex \let\install=y\input{mylatexformat.dtx}
+% (quote the arguments according to the demands of your shell)
+%
+% Documentation:
+% (pdf)latex mylatexformat.dtx
+% Copyright (C) 2010-2011 by Florent Chervet <florent.chervet@free.fr>
+%<*ignore>
+\begingroup
+ \def\x{LaTeX2e}%
+\expandafter\endgroup
+\ifcase 0\ifx\install y1\fi\expandafter
+ \ifx\csname processbatchFile\endcsname\relax\else1\fi
+ \ifx\fmtname\x\else 1\fi\relax
+\else\csname fi\endcsname
+%</ignore>
+%<*install>
+\input docstrip.tex
+\Msg{************************************************************************}
+\Msg{* Installation}
+\Msg{* Package 2011/02/12 v3.4 - Use mylatexformat.ltx to make a format based on the preamble of any LaTeX file*}
+\Msg{************************************************************************}
+
+\keepsilent
+\askforoverwritefalse
+
+\let\MetaPrefix\relax
+\preamble
+
+This is a generated file.
+
+mylatexformat : 2011/02/12 v3.4 - Use mylatexformat.ltx to make a format based on the preamble of any LaTeX file
+
+This work may be distributed and/or modified under the
+conditions of the LaTeX Project Public License, either
+version 1.3 of this license or (at your option) any later
+version. The latest version of this license is in
+ http://www.latex-project.org/lppl.txt
+
+This work consists of the main source file mylatexformat.dtx
+and the derived files
+ mylatexformat.ltx, mylatexformat.pdf, mylatexformat.ins
+
+mylatexformat - Use mylatexformat.ltx to make a format based on the preamble of any LaTeX file
+Copyright (C) 2010-2011 by Florent Chervet <florent.chervet@free.fr>
+
+\endpreamble
+\let\MetaPrefix\DoubleperCent
+
+\generate{%
+ \file{mylatexformat.ins}{\from{mylatexformat.dtx}{install}}%
+ \file{mylatexformat.ltx}{\from{mylatexformat.dtx}{package}}%
+}
+
+\askforoverwritefalse
+\generate{%
+ \file{mylatexformat.drv}{\from{mylatexformat.dtx}{driver}}%
+}
+
+\obeyspaces
+\Msg{************************************************************************}
+\Msg{*}
+\Msg{* To finish the installation you have to move the following}
+\Msg{* file into a directory searched by TeX:}
+\Msg{*}
+\Msg{* mylatexformat.ltx}
+\Msg{*}
+\Msg{* To produce the documentation run the file `mylatexformat.dtx'}
+\Msg{* through LaTeX.}
+\Msg{*}
+\Msg{* Happy TeXing!}
+\Msg{*}
+\Msg{************************************************************************}
+
+\endbatchfile
+%</install>
+%<*ignore>
+\fi
+%</ignore>
+%<*driver>
+\edef\thisfile{\jobname}
+\def\thisinfo{Make a format based on the preamble of any \texorpdfstring{\LaTeX{}}{LaTeX} file}
+\def\thisdate{2011/02/12}
+\def\thisversion{3.4}
+\let\loadclass\LoadClass
+\def\LoadClass#1{\loadclass[abstracton]{scrartcl}\let\scrmaketitle\maketitle\AtEndOfClass{\let\maketitle\scrmaketitle}}
+{\makeatletter{\endlinechar`\^^J\obeyspaces
+ \gdef\ErrorUpdate#1=#2,{\@ifpackagelater{#1}{#2}{}{\let\CheckDate\errmessage\toks@\expandafter{\the\toks@
+ \thisfile-documentation: updates required !
+ package #1 must be later than #2
+ to compile this documentation.}}}}%
+ \gdef\CheckDate#1{{\let\CheckDate\relax\toks@{}\@for\x:=#1\do{\expandafter\ErrorUpdate\x,}\CheckDate\expandafter{\the\toks@}}}}
+\AtBeginDocument{\DeleteShortVerb{\|}\CheckDate{interfaces=2011/01/26,tabu=2011/01/26}}
+\PassOptionsToPackage{svgnames}{xcolor}
+\PassOptionsToPackage{hyperfootnotes}{hyperref}
+\documentclass[a4paper,oneside]{ltxdoc}
+\usepackage[latin1]{inputenc}
+\usepackage[american]{babel}
+\usepackage[T1]{fontenc}
+\usepackage{etex,etoolbox,geometry,lastpage,xspace,xcolor,bbding,txfonts,atveryend,moresize,relsize}
+\usepackage{tocloft,titlesec,graphicx,fancyhdr,framed,multirow,makecell,tabu,enumitem,needspace}
+\usepackage{holtxdoc,bookmark,embedfile,tabu,keycommand}
+\usepackage{microtype}
+\usepackage{interfaces}
+\usetikz{basic}
+\csname endofdump\endcsname
+\CodelineNumbered
+\usepackage{fancyvrb}\fvset{gobble=1,listparameters={\topsep=0pt}}
+\lastlinefit999
+\geometry{top=0pt,includeheadfoot,headheight=7mm,headsep=.6cm,bottom=.6cm,footskip=.5cm,left=4cm,right=14mm}
+\hypersetup{%
+ pdftitle={The mylatexformat package},
+ pdfsubject={Use mylatexformat.ltx to make a format based on the preamble of any LaTeX file},
+ pdfauthor={Florent CHERVET},
+ colorlinks,linkcolor=reflink,
+ pdfstartview={FitH},
+ pdfkeywords={tex, e-tex, latex, package, format, formats, pdfTeX},
+ bookmarksopen=true,bookmarksopenlevel=2}
+\embedfile{\thisfile.dtx}
+\begin{document}
+ \DocInput{\thisfile.dtx}
+\end{document}
+%</driver>
+% \fi
+%
+% \CheckSum{317}
+%
+% \CharacterTable
+% {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
+% Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
+% Digits \0\1\2\3\4\5\6\7\8\9
+% Exclamation \! Double quote \" Hash (number) \#
+% Dollar \$ Percent \% Ampersand \&
+% Acute accent \' Left paren \( Right paren \)
+% Asterisk \* Plus \+ Comma \,
+% Minus \- Point \. Solidus \/
+% Colon \: Semicolon \; Less than \<
+% Equals \= Greater than \> Question mark \?
+% Commercial at \@ Left bracket \[ Backslash \\
+% Right bracket \] Circumflex \^ Underscore \_
+% Grave accent \` Left brace \{ Vertical bar \|
+% Right brace \} Tilde \~}
+%
+% \DoNotIndex{\begin,\CodelineIndex,\CodelineNumbered,\def,\DisableCrossrefs,\~,\@ifpackagelater}
+% \DoNotIndex{\ttfamily,\tiny,\sffamily,\small,\normalfont,\newindex,\makeindex,\makeglossary,\LARGE,\Large,\large,\itshape,\immediate}
+% \DoNotIndex{\&,\/,\=,\@dofilelist,\@spaces,\@undefined,\^,\active,\bfseries,\boldmath,\etex@primitive@openout,\footnotesize,\g@addto@macro,\Huge}
+% \DoNotIndex{\DocInput,\documentclass,\EnableCrossrefs,\end,\GetFileInfo}
+% \DoNotIndex{\NeedsTeXFormat,\OnlyDescription,\RecordChanges,\usepackage}
+% \DoNotIndex{\ProvidesClass,\ProvidesPackage,\ProvidesFile,\RequirePackage}
+% \DoNotIndex{\filename,\fileversion,\filedate,\let}
+% \DoNotIndex{\@listctr,\@nameuse,\csname,\else,\endcsname,\expandafter}
+% \DoNotIndex{\gdef,\global,\if,\item,\newcommand,\nobibliography}
+% \DoNotIndex{\par,\providecommand,\relax,\renewcommand,\renewenvironment}
+% \DoNotIndex{\stepcounter,\usecounter,\nocite,\fi}
+% \DoNotIndex{\@fileswfalse,\@gobble,\@ifstar,\@unexpandable@protect}
+% \DoNotIndex{\AtBeginDocument,\AtEndDocument,\begingroup,\endgroup}
+% \DoNotIndex{\frenchspacing,\MessageBreak,\newif,\PackageWarningNoLine}
+% \DoNotIndex{\protect,\string,\xdef,\ifx,\texttt,\@biblabel,\bibitem}
+% \DoNotIndex{\z@,\wd,\wheremsg,\vrule,\voidb@x,\verb,\bibitem}
+% \DoNotIndex{\FrameCommand,\MakeFramed,\FrameRestore,\hskip,\hfil,\hfill,\hsize,\hspace,\hss,\hbox,\hb@xt@,\endMakeFramed,\escapechar}
+% \DoNotIndex{\do,\date,\if@tempswa,\@tempdima,\@tempboxa,\@tempswatrue,\@tempswafalse,\ifdefined,\ifhmode,\ifmmode,\cr}
+% \DoNotIndex{\box,\author,\advance,\multiply,\Command,\outer,\next,\leavevmode,\kern,\title,\toks@,\trcg@where,\tt}
+% \DoNotIndex{\the,\width,\star,\space,\section,\subsection,\textasteriskcentered,\textwidth}
+% \DoNotIndex{\",\:,\@empty,\@for,\@gtempa,\@latex@error,\@namedef,\@nameuse,\@tempa,\@testopt,\@width,\\,\m@ne,\makeatletter,\makeatother}
+% \DoNotIndex{\maketitle,\parindent,\setbox,\x,\kernel@ifnextchar}
+% \DoNotIndex{\KVS@CommaComma,\KVS@CommaSpace,\KVS@EqualsSpace,\KVS@Equals,\KVS@Global,\KVS@SpaceEquals,\KVS@SpaceComma,\KVS@Comma}
+% \DoNotIndex{\DefineShortVerb,\DeleteShortVerb,\UndefineShortVerb,\MakeShortVerb,\endinput}
+%
+% \let\ClearPage\clearpage
+% \makeatletter
+% \catcode`\§ \active \def§{\@ifnextchar §{\par\nobreak\vskip-2\parskip}{\par\nobreak\vskip-\parskip}}
+% \newrobustcmd\Xspace{\ifnum\catcode`\ =\active\else\expandafter\xspace\fi}
+% \newrobustcmd*\stform{\ifincsname\else\expandafter\@stform\fi}
+% \newrobustcmd*\@stform{\@ifnextchar*{\@@stform[]\textasteriskcentered\@gobble}\@@stform}
+% \newrobustcmd*\@@stform[2][\string]{\textttbf{#1#2}\Xspace}
+%
+% \newrobustcmd*\thispackage{\@ifstar
+% {\xpackage{{\thisfile}}\Xspace}
+% {\xpackage{{\pkgcolor\thisfile}}\Xspace}}
+% \def\ThisPackage{\Xpackage{\thisfile}\xspace}
+% \def\CTANpackage#1{\href{http://www.tex.ac.uk/tex-archive/help/Catalogue/entries/#1.html}{\xpackage{#1}}}
+% \def\Xpackage{\@dblarg\X@package}
+% \def\X@package[#1]#2{\@testopt{\X@@package{#1}{#2}}{}}
+% \def\X@@package#1#2[#3]{%
+% \xpackage{#2\footnote{\noindent\xpackage{#2}: \href{http://www.ctan.org/tex-archive/macros/latex/contrib/#1}{\nolinkurl{CTAN:macros/latex/contrib/#1}}#3}}}
+% \def\Underbrace#1_#2{$\underbrace{\vtop to2ex{}\hbox{#1}}_{\footnotesize\hbox{#2}}$}
+% \newrobustcmd*\FC[1][\color{copper}]{{#1\usefont{T1}{fts}xn FC}}
+%
+% \parindent\z@\parskip.4\baselineskip\topsep\parskip\partopsep\z@
+% \g@addto@macro\macro@font{\macrocodecolor\let\AltMacroFont\macro@font}
+% \g@addto@macro\@list@extra{\parsep\parskip\topsep\z@\itemsep\z@}
+% \def\smex{\leavevmode\hb@xt@2em{\hfil$\longrightarrow$\hfil}}
+% \newrobustcmd\verbfont{\usefont{T1}{\ttdefault}{\f@series}{n}} \let\vb\verbfont
+% \renewrobustcmd\#[1]{{\usefont{T1}{pcr}{bx}{n}\char`\##1}}
+% \newrobustcmd\csred[1]{\textcolor{red}{\cs{#1}}}
+% \renewrobustcmd\cs[2][]{\mbox{\vb#1\expandafter\@gobble\string\\#2}}
+% \newrobustcmd\CSbf[1]{\textbf{\CS{#1}}}
+% \newrobustcmd\csbf[2][]{\textbf{\cs[{#1}]{#2}}}
+% \newrobustcmd\textttbf[1]{\textbf{\texttt{#1}}}
+% \renewrobustcmd*\bf{\bfseries}\newcommand\nnn{\normalfont\mdseries\upshape}\newcommand\nbf{\normalfont\bfseries\upshape}
+% \newrobustcmd*\blue{\color{blue}}\newcommand*\red{\color{dr}}\newcommand*\green{\color{green}}\newcommand\rred{\color{red}}
+% \newrobustcmd\rrbf{\color{red}\bfseries}
+% \newcommand\textt[1]{\texorpdfstring{\texttt{#1}}{#1}}
+% \newrobustcmd\texttbf[1]{\textbf{\texttt{#1}}}
+% \colorlet{pkgcolor}{teal}\def\pkgcolor{\color{pkgcolor}}
+% \definecolor{copper}{rgb}{0.67,0.33,0.00} \newcommand\copper{\color{copper}}
+% \definecolor{dg}{rgb}{0.16,0.33,0.00} \newcommand\dg{\color{dg}}
+% \definecolor{db}{rgb}{0,0,0.502} \newcommand\db{\color{db}}
+% \definecolor{dr}{rgb}{0.49,0.00,0.00} \let\dr\red
+% \definecolor{lk}{rgb}{0.25,0.25,0.25} \newrobustcmd\lk{\color{lk}}
+% \newrobustcmd\bk{\color{black}}\newcommand\md{\mdseries}
+% \def\M{\@ifstar{\M@i\@firstofone}{\M@i\meta}}
+% \def\M@i#1{\@ifnextchar[^^A]
+% {\M@square#1}
+% {\@ifnextchar(^^A)
+% {\M@paren#1}
+% {\M@brace#1}}^^A
+% }
+% \def\M@square#1[#2]{\M@Bracket[{#1{#2}}]}
+% \def\M@paren#1(#2){\M@Bracket({#1{#2}})}
+% \def\M@brace#1#2{\M@Bracket\{{#1{#2}}\}}
+% \def\M@Bracket#1#2#3{{\ttfamily#1#2#3}}
+% \newrobustcmd*\thisyear{\begingroup
+% \def\thisyear##1/##2\@nil{\endgroup
+% \oldstylenums{\ifnum##1=2010\else 2010\,\textendash\,\fi ##1}^^A
+% }\expandafter\thisyear\thisdate\@nil
+% }
+%
+% \def\declmargin{\hspace*\declmarginwidth }
+% \def\declmarginwidth{\dimexpr -\leftmargini +\arrayrulewidth +\tabcolsep\relax}
+% \renewrobustcmd\declcs[2][]{^^A
+% \if@nobreak \par\nobreak
+% \else \par\addvspace\parskip
+% \Needspace{.08\textheight}\fi
+% \changefont{size+=2.5pt,spread=1,fam=\ttdefault}^^A
+% \newcommand*\csanchor[2][]{\raisedhyperdef[14pt]{declcs}{##2}{\cs[{##1}]{##2}}}^^A
+% \def\*{\unskip\,\texttt{*}}\noindent
+% \hskip-\leftmargini
+% \begin{tabu}{|l|}\hline
+% \expandafter\SpecialUsageIndex\csname #2\endcsname
+% \csanchor[{#1}]{#2}}
+% \renewcommand\enddeclcs{%
+% \crcr \hline \end{tabu}\nobreak
+% \par \nobreak \noindent
+% \ignorespacesafterend
+% }
+% \newrobustcmd*\csref[2][]{\hyperref{}{declcs}{#2}{\cs[{#1}]{#2}}}
+%
+% \let\plainllap\llap
+% \newrobustcmd\macro@llap[1]{{\global\let\llap\plainllap
+% \setbox0=\hbox\bgroup \raisedhyperdef{macro}{\saved@macroname}{#1}\egroup
+% \ifdim\wd0>2.4cm
+% \hbox to\z@ \bgroup\hss \hbox to2.4cm{\unhcopy0\hss}\egroup
+% \edef\@tempa{\hskip\dimexpr\the\wd0-2.4cm}\global\everypar\expandafter{\the\expandafter\everypar
+% \@tempa \global\everypar{}}^^A
+% \else \llap{\unhbox0}\fi}}
+% \pretocmd\macro{\if@nobreak\else\Needspace{2\baselineskip}\fi
+% \MacrocodeTopsep\z@skip \MacroTopsep\z@skip \parsep\z@ \topsep\z@ \itemsep\z@ \partopsep\z@
+% \let\llap\macro@llap}{}{}
+% \apptocmd\endmacro{\goodbreak\vskip.3\parskip}{}{}
+% \newrobustcmd\macroref[2][]{\hyperref{}{macro}{#2}{\cs[{#1}]{#2}}}
+%
+% \DefineVerbatimEnvironment{Verb}{Verbatim}{gobble=1}
+% \DefineVerbatimEnvironment{VerbLines}{Verbatim}{gobble=1,frame=lines,framesep=6pt,fontfamily=txtt,fontseries=b}
+% \newkeyenvironment+[\|]{dblruled}[first=.4pt,second=.4pt,sep=1pt,left=\z@]%
+% {|\def\FrameCommand|{%
+% \vrule\@width\commandkey{first}
+% \hskip\commandkey{sep}
+% \vrule\@width\commandkey{second}
+% |\hspace|{\commandkey{left}}}
+% |\MakeFramed| {\advance\hsize-|\width \FrameRestore|}%
+% }{%
+% |\endMakeFramed|%
+% }
+%
+% \colorlet{HeadBand}{BlanchedAlmond}
+% \newcommand*\topheader{\tikz[remember picture,overlay]{
+% \coordinate (A) at (current page.north west);
+% \coordinate (B) at ($(current page.north east)+(0cm,-\headheight)$);
+% \fill [color=HeadBand,fill opacity=.6] (A) rectangle (B);
+% }%
+% }
+%
+% \pagesetup[plain]{
+% norules,
+% foot/right=\oldstylenums{\thepage} / \oldstylenums{\pageref{LastPage}},
+% foot/font=\lk\scriptsize,
+% foot/left/offset=3cm,
+% foot/right/offset=1cm,
+% foot/left=\vbox to\baselineskip{\vss{{\rotatebox[origin=l]{90}{\thispackage\,[rev.\thisversion]\,\copyright\,\thisyear\,\lower.4ex\hbox{\pkgcolor\NibRight}\,\FC\quad \xemail{florent.chervet at free.fr}}}}},
+% }
+% \pagesetup{
+% foot/right={\oldstylenums{\thepage} / \oldstylenums{\pageref{LastPage}}},
+% foot/font=\lk\scriptsize,
+% foot/left/offset=3cm,
+% foot/right/offset=1cm,
+% foot/left=\vbox to\baselineskip{\vss{{\rotatebox[origin=l]{90}{\thispackage\,[rev.\thisversion]\,\copyright\,\thisyear\,\lower.4ex\hbox{\pkgcolor\NibRight}\,\FC}}}},
+% head/font=\small\sffamily,
+% head/right/offset=1cm,
+% head/right=\noindent\raise.4ex\hbox{\thispackage : \thisinfo},
+% head/left=\topheader,
+% }
+% \sectionformat\section{
+% top=\medskipamount,
+% bottom=.5\smallskipamount,
+% bookmark={color=MidnightBlue},
+% }
+% \sectionformat\subsubsection{
+% top=\smallskipamount,bottom=0pt,
+% bookmark={color=lk},
+% }
+% \bookmarksetup{openlevel=3}
+%
+% \newcommand\macrocodecolor{\color{macrocode}}\definecolor{macrocode}{rgb}{0.05,0.02,0.07}
+% \newcommand\reflinkcolor{\color{reflink}}\definecolor{reflink}{rgb}{0.49,0.00,0.00}
+% \newrobustcmd*\IMPLEMENTATION{%
+% \bookmarksetup{openlevel=1}
+% ^^A\geometry{top=0pt,includeheadfoot,headheight=7mm,headsep=.6cm,bottom=.6cm,footskip=.5cm,left=4cm,right=1.5cm}
+% \newgeometry{top=0pt,includeheadfoot,headheight=7mm,headsep=.6cm,bottom=.6cm,footskip=.5cm,left=3cm,right=5mm}
+% \pagesetup*{left/offset-=1cm,right/offset-=1.5cm-2mm}
+% \section{Implementation} \label{sec:implementation}
+% }
+%
+% \makeatother
+%
+% \deffootnote{1em}{0pt}{\rlap{\textsuperscript{\thefootnotemark}}\kern1em}
+%
+% \title{\vspace*{-28pt}\href{http://www.tex.ac.uk/tex-archive/help/Catalogue/entries/mylatexformat.html}{\HUGE\bfseries\sffamily\pkgcolor mylatexformat}\vspace*{6pt}}
+% \date{}
+% \subtitle{\LARGE\begin{tabu}{X[c]}
+% Use \thispackage* to make a format \\
+% based on the preamble of any LaTeX file \\[-1ex]
+% \small\FC
+% \end{tabu}
+% \vspace*{-12pt}}
+% \author{\smaller\thisdate~--~\hyperref[\thisversion]{version \thisversion}}
+%
+% \maketitle
+%
+% {\makeatletter\let\@thefnmark\@empty\let\@makefntext\@firstofone
+% \footnotetext{\noindent\parskip=0pt\scriptsize
+% This documentation is produced with the \textt{DocStrip} utility.\par
+% \begin{tabu}{X[-3]X[-1]X}
+% \smex To get the package, &run: &\texttt{etex \thisfile.dtx} \\
+% \smex To get the documentation &run (thrice): &\textt{pdflatex \thisfile.dtx} \\
+% \leavevmode\hphantom\smex To get the index, &run: &\texttt{makeindex -s gind.ist \thisfile.idx}
+% \end{tabu}§
+% The \xext{dtx} file is embedded into this pdf file thank to \Xpackage{embedfile} by H. Oberdiek.}
+% }
+%
+% \deffootnote{1em}{0pt}{\rlap{\thefootnotemark.}\kern1em}
+%
+% {\let\quotation\relax\let\endquotation\relax\vspace*{-1cm}%
+% \begin{abstract}\parskip\smallskipamount\parindent0pt\lastlinefit0\leftskip.7cm\rightskip\leftskip
+%
+% \thispackage can be used to make a format from the preamble of any \LaTeX{} file.
+% The use of formats helps to speed up compilations: packages which have been
+% dumped in the format are loaded at very high speed. A format (also known as \emph{dump}) is therefore very suitable:
+% \begin{itemize}[label=\textendash,leftmargin=3em]
+% \item if you have many documents that share the same preamble,
+% \item if you have a document which loads a large amount of packages (like \xpackage{TikZ} graphics libraries).
+% \end{itemize}
+%
+% \medskip
+%
+% \thispackage will dump all definitions until \cs{begin}\M*{document} or \csref{endofdump}, more precisely:
+%
+% \csdef{tabu*}{\begingroup\tabcolsep0pt\begin{tabu}}
+% \csdef{endtabu*}{\end{tabu}\endgroup}
+% \definecolor{ly}{rgb}{1,1,.35}
+%
+% \hskip-2em
+% \begin{tabu}to \linewidth{XXX[1.2]}
+%
+% \fcolorbox{black}{ly}{%
+% \begin{tabu*}{X}
+% \cs{RequirePackage}\M*{...} \\
+% \cs{documentclass}\M*{...} \\
+% \cs{usepackage}\M*{...} \\
+% \noindent\,\,... \\
+% \noindent\,\,... \\
+% \csbf{begin}{\bfseries\M*{document}}
+% \end{tabu*}}
+% &
+% \begin{tabu*}{X}
+% \fcolorbox{black}{ly}{%
+% \begin{tabu}{X}
+% \cs{RequirePackage}\M*{...} \\
+% \cs{documentclass}\M*{...} \\
+% \cs{usepackage}\M*{...} \\
+% \csbf{endofdump} \\
+% \end{tabu}} \\
+% \noindent\,\, ... \\
+% \noindent\,\,\cs{begin}\M*{document}
+% \end{tabu*}
+% &
+% \begin{tabu*}{X}
+% \fcolorbox{black}{ly}{%
+% \begin{tabu*}{X}
+% \cs{RequirePackage}\M*{...} \\
+% \cs{documentclass}\M*{...} \\
+% \cs{usepackage}\M*{...} \\
+% \csbf{csname} \texttbf{endofdump}\csbf{endcsname} \\
+% \end{tabu*}} \\
+% \noindent\,\, ... \\
+% \noindent\,\,\cs{begin}\M*{document}
+% \end{tabu*}
+% \end{tabu}
+% \medskip
+%
+% The colored parts correspond to the format. The \xext{log} file will report:
+%
+% \begin{tabu}{@{}X|[pkgcolor]X}
+% \begin{tabu}{>{\ttfamily}X[l]}
+% start reading document "my document" \\
+% on input line *** (\cs{begin}\M*{document})
+% \end{tabu}
+% &
+% \begin{tabu}{>{\ttfamily}X[l]}
+% start reading document "my document" \\
+% on input line *** (\cs{endofdump})
+% \end{tabu}
+% \end{tabu}
+% \medskip
+%
+% \thispackage was primarily written from \CTANpackage{mylatex}
+% by David Carlisle, but it is different in many points (see \ref{mylatex}). In particular, \thispackage allows to put almost
+% any package in the format, with one exception: the package \CTANpackage{minitoc}
+% cannot be included in the format (you must use \csref{endofdump} before \cs{usepackage}\M*{minitoc}).
+%
+% \end{abstract}
+% }
+%
+% \tocsetup{
+% section/skip=4pt plus2pt minus2pt,
+% subsection/skip=4pt plus2pt minus2pt,
+% title=Contents,
+% title/skip=2pt,
+% title/after={\pkgcolor\quad\leaders\vrule height3.4pt depth-3pt\hfill\null},
+% multicols/afterend=\leavevmode{\pkgcolor\hrule},
+% twocolumns,
+% bookmark={text=Contents,bold},
+% }
+% \tableofcontents
+% \clearpage
+%
+%
+% \MakeShortVerb{\+}
+%
+% \section{Creating a format}
+%
+% \subsection{Using MikTeX}
+%
+% \subsubsection{With preloaded pdflatex format (pdf output)}
+%
+% Use the following command line:
+%
+% \quad+etex -initialize [opts] "&pdflatex" mylatexformat.ltx """abc.tex"""+
+%
+% You need 3 quotes around your \xext{tex} file if its name contains space
+% (only one quote if it does not contain any space, but 3 quotes is more general...)
+% \medskip
+%
+% Full example:§§
+% \begin{VerbLines}
+% etex -initialize -save-size=20000 -stack-size=20000
+% -jobname="The-Name-Of-The-.fmt-File(without .fmt extension)"
+% "&pdflatex" mylatexformat.ltx """Mon Fichier TeX.tex"""
+% \end{VerbLines}
+%
+%
+% \subsubsection{With preloaded latex format (dvi output)}
+%
+% Use the following command line:
+%
+% \quad+etex -initialize [opts] "&latex" mylatexformat.ltx """abc.tex"""+
+%
+%
+% \subsubsection{With preloaded format xelatex (pdf output)}
+%
+% Use the following command line:
+%
+% \quad+xetex -initialize [opts] "&xelatex" mylatexformat.ltx """abc.tex"""+
+%
+%
+% \subsection{Using other distributions}
+%
+% As I pointed out in the \texttt{abstract}, I have not been able to test the file on other distributions.
+%
+% Some users told me they typed the following command line:
+%
+% +latex -ini -jobname="fmt-file-name" "&latex" mylatexformat.ltx """abc.tex"""+
+%
+% \section{Using a format}
+%
+% \subsection{Using MikTeX}
+%
+% Add the format to the very first line of your LaTeX file :
+%
+% \quad+%&"Mon Beau Format"+
+%
+% You may use the $\varepsilon$-\TeX{} option : +-dont-parse-first-line+ \quad to avoid loading the format.
+%
+% \subsection{Using other distributions}
+%
+% As I pointed out in the \texttt{abstract}, I have not been able to test the file on other distributions.
+%
+% \clearpage
+% \section[How does it work ? (and why it is different from mylatex.ltx)]{How does it work ? (and why it is different from \xpackage{mylatex.ltx})}
+% \label{mylatex}
+%
+% \xpackage{mylatex.ltx} has three important limitations:
+% \begin{enumerate}[label=\arabic*)~]
+% \item The end of the format is either \verb+\begin{document}+ or the comment \verb+%mylatex+\\
+% Therefore, after the format has been loaded, \TeX{} checks the commentaries in the preamble
+% in order to skip everything before \verb+%mylatex+. \\
+% But this way, braces \textbf{must match inside commentaries !}
+% \item \xpackage{mylatex.ltx} temporarily redefines the command \cs{document} in order to stop
+% the creation of the format (execution of \cs{dump}) at begin document. \\
+% However, the \textbf{initial definition of the macro \csbf{document}} is saved
+% and reloaded after the format has been loaded. \\
+% Therefore, packages that modifies this macro (such as \Xpackage[oberdiek/auxhook]{auxhook}[ H. Oberdiek] or
+% \Xpackage{etoolbox}[ P. Lehman] cannot be included in the format!
+% \item If your document starts with :\\
+% \verb+\begin{document}% commentary+ or with :\\
+% \verb+\begin{document}\makeatletter+ \\
+% the format is not stopped at \verb+\begin{document}+ and an error occurs.
+% \end{enumerate}
+%
+% \begin{dblruled}[first=2pt,sep=1pt,second=.6pt,left=4pt]
+% With \xpackage{mylatexformat.ltx}, those limitations are lifted.
+%
+% \xpackage{mylatexformat.ltx}:
+% \begin{enumerate}[label=\arabic*)~]
+% \item Temporarily redefines \cs{begin} in order to check if its argument is \meta{document}. \\
+% Therefore, packages like \xpackage{auxhook} or \xpackage{etoolbox} can be included in the format.
+% \item Stops the format when it encounters \verb+\begin{document}+ or \cs{endofdump}.
+% \item Does not read inside commentaries
+% \item After the format has been loaded, each line is checked to see if it \textbf{contains} either:
+% \begin{description}[align=left,labelsep=1cm,font=\bfseries,labelindent=1cm]
+% \item[] {\dr\verb+\begin{document}+}
+% \item[or: ] {\dr\verb+\endofdump+}
+% \item[or: ] {\dr\verb+\csname endofdump\endcsname+}\textsuperscript{\bfseries\textasteriskcentered}
+% \end{description}
+% Report is written in the \xext{log} file, with the job name, the name of the preloaded format,
+% the list of preloaded files and the first input line read after loading of format.
+% \end{enumerate}
+%
+% {\footnotesize\textsuperscript{\bfseries\textasteriskcentered} this way, the command \verb+\csname endofdump\endcsname+ is silently ignored
+% (equiv. to \cs{relax}) in case the format is not used.}
+% \end{dblruled}
+%
+%
+%
+%
+% \StopEventually{
+% }
+%
+% \IMPLEMENTATION\DeleteShortVerb{\+}
+%
+% \begin{macrocode}
+%<*package>
+%%% _____________________________________________________________________
+%%% mylatexformat.ltx
+%%% ^^^^^^^^^^^^^^^^^
+%%% From an original idea by David Carlisle - mylatex.ltx 1994/09/27
+%%% © lppl 2010-2011 - F Chervet - 2011/02/12 v3.4
+%%% _____________________________________________________________________
+%%%
+%%% Use this file to make a format based on the preamble of any LaTeX
+%%% file.
+%%%
+%%% The format is made from the very beginning of the file up to either:
+%%% i) the command : \endofdump
+%%% placed in the preamble
+%%% ii) the command : \csname endofdump\endcsname
+%%% placed in the preamble
+%%% iii) \begin{document}
+%%% if \endofdump nor \csname endofdump\endcsname
+%%% haven't been found in the preamble.
+%%%
+%%% A format helps to speed up compilations, packages which have been
+%%% dumped in the format are loaded at very high speed.
+%%% --------------------------------------------------------------------
+%%% There are no restrictions on the distribution or modification of
+%%% this file, except that other people should not attempt to alter
+%%% the master copy on the ctan archives.
+%%%
+%%% Making the format --------------------------------------------------
+%%% ^^^^^^^^^^^^^^^^^ USING MikTeX
+%%% * With preloaded pdflatex format (pdf output) :
+%%% etex -initialize [opts] "&pdflatex" mylatexformat.ltx """abc.tex"""
+%%% => compile your document using :
+%%% pdflatex
+%%% or texify --tex-option=-output-format=pdf
+%%%
+%%% * With preloaded latex format (dvi output) :
+%%% etex -initialize [opts] "&latex" mylatexformat.ltx """abc.tex"""
+%%% => compile your document using
+%%% latex
+%%% or texify --tex-option=-output-format=dvi
+%%%
+%%% * With preloaded format xelatex (pdf output) :
+%%% xetex -initialize [opts] "&xelatex" mylatexformat.ltx """abc.tex"""
+%%% => compile your document using xelatex
+%%%
+%%% NOTA BENE: Please, notice the 3 quotes !
+%%% ^^^^^^^^^^
+%%%
+%%% In fact, 3 quotes are necessary only if you "file name.tex" contains a space !
+%%%
+%%% -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
+%%% Exemple of a command line for making format using pdfTeX :
+%%%
+%%% etex -initialize -interaction=nonstopmode
+%%% -save-size=20000 -stack-size=20000
+%%% -jobname="Mon Beau Format Perso"
+%%% "&pdflatex" mylatexformat.ltx "Mon Fichier TeX.tex"
+%%%
+%%% "Mon Beau Format Perso.fmt" (en Français dans le texte) will be created
+%%% (or overwritten) in the current working directory.
+%%%
+%%% Using the format ---------------------------------------------------
+%%% ^^^^^^^^^^^^^^^^^ USING MikTeX
+%%% Add the format to the very first line of your LaTeX file :
+%%% --> first line : %&"format file name"
+%%% without the .fmt extension.
+%%% [You may use the option : -dont-parse-first-line option
+%%% to avoid loading the format]
+%%% --------------------------------------------------------------------
+%% ____________________________________________________________________
+%% The following informations come from mylatex.ltx from David Carlisle:
+%% Given a LaTeX file `abc.tex', use initex as follows:
+%%
+%% initex &latex mylatexformat.ltx abc (Generic TeX)
+%% initex \&latex mylatexformat.ltx abc (unix and other TeX's)
+%% tex /i &latex mylatexformat.ltx abc (emtex)
+%%
+%% If you are on a Mac or using some shell that makes it inconvenient
+%% to use a command line such as the above examples then you may
+%% make a file `mylatex.tex' with the single line
+%% \input mylatex.ltx abc
+%% and then pass the file mylatex.tex to your (ini)tex shell to produce
+%% the format, ie something equivalent to initex &latex mylatex.tex.
+%%
+%% If you are using OzTeX, see the separate instructions below.
+%%
+%% This should make a format file mylatex.fmt which you can then use
+%% as follows
+%%
+%% Using the new format
+%% ^^^^^^^^^^^^^^^^^^^^
+%%
+%% tex &mylatex abc (generic TeX)
+%% virtex \&mylatex abc (Unix TeX)
+%%
+%% This will process your document, abc.tex, just as LaTeX does, but
+%% quicker as the contents of the preamble will be stored in the
+%% format file and will not need to be run each time.
+%%
+%% If (vir)tex fails to find your mylatex.fmt then it is not searching
+%% in the current directory, either modify your TEXFORMATS path (or
+%% equivalent) to search `.' or (on unix/dos) use ./ as in:
+%% virtex \&./mylatex abc
+%%
+%% Making and using the format with OzTeX
+%% ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+%%
+%% Given a LaTeX file `abc.tex', do this: select `TeX...' from OzTeX's
+%% TeX menu, and go to the folder containing the file `abc.tex' as if you
+%% were selecting the file `abc.tex'. Then hit the Cancel button - this
+%% procedure sets OzTeX's working folder to the one containing abc.tex.
+%% Next, select iniTeX from the TeX menu, and type:
+%%
+%% &latex mylatex.ltx abc
+%%
+%% This should make a format file mylatex.fmt which you can save in the
+%% same folder as the file you're working on.
+%%
+%% To use the new format, put this at the very start of the very first
+%% line of your document:
+%%
+%% %&mylatex
+%%
+%% Further Notes
+%%
+%% The file abc.tex must contain a line *just* with
+%% \begin{document}
+%% Everything up to (but not including) the \begin{document} will
+%% be saved in the format and not executed in subsequent runs.
+%%
+%% If you are modifying the document (or working on a similar document)
+%% you may wish to add new commands to your document preamble.
+%% The `mylatex' format normally skips the whole preamble (believing
+%% it to be pre-loaded) and so such new commands do not take effect.
+%% You could re-make the format, preloading the new preamble, but that
+%% might be inconvenient to do every time, and so an alternative scheme
+%% has been introduced.
+%% If the preamble contains a comment mylatex (ie a line just
+%% containing a % white space and the word mylatex) then the mylatex
+%% format will start reading the preable at that point so any new
+%% commands can be placed after such a comment and they will be
+%% executed.
+%% --------------------------------------------------------------------
+%%
+%%\RequirePackage{etex}% RequirePackage may be used before the class
+%%
+%% In principle \openout stream= filename need not be space terminated,
+%% and need not be immediate, but this covers \makeindex \makeglossary
+%% and index package's \newindex which are all the cases of \openout
+%% that occur before \begin{document} that I could see.
+%% Thanks to Ross Moore for pointing out \AtBeginDocument is too late
+%% eg changebar package *closes* the stream in \AtBeginDocument, so need
+%% to make sure it is opened before that. Make a special purpose hook.
+\makeatletter
+% \end{macrocode}
+%
+%
+% \begin{macro}{\begin}
+%
+% \cs{begin} is overloaded in order to stop \cs{dump} at begin document
+% if the macro \cs{endofdump} is not given somewhere in the preamble.
+% Rem: it is NOT POSSIBLE to redefine \cs{document}, for the macro
+% \cs{document} is changed or patched by some classes or packages
+% (\xpackage{auxhook}, \xpackage{etoolbox} etc.)
+%
+% With \Xpackage{etoolbox} version \textt{2.1} and earlier, \cs{begin} is patched,
+% in order to insert the hooks \cs{AtBeginEnvironment} and \cs{AtEndEnvironment}.
+%
+% Therefore, it's not possible to restore, at end of dump, the orginal definition
+% of \cs{begin} in the \LaTeX{} kernel. Instead, \thispackage inserts a reversible
+% patch of the \cs{begin} command: the patched is reversed at end of dump by
+% \macroref{MYLATEX@cleanup}.
+%
+% \begin{macrocode}
+%% \begin is overloaded in order to stop \dump at begin document
+%% if the macro \endofdump is not given somewhere in the preamble.
+%% Rem: it is NOT POSSIBLE to redefine \document, for the macro
+%% \document is changed or patched by some classes or packages
+%% (auxhook, etoolbox etc.)
+\begingroup \def\x #1{\endgroup
+ \gdef\begin ##1{\MYLATEX@StopAtdocument{##1}#1}
+}\expandafter\x\expandafter{\begin{#1}}
+\def\MYLATEX@StopAtdocument #1{\expandafter
+ \ifx\csname #1\endcsname\document \expandafter\endofdump \fi
+}% \MYLATEX@StopAtdocument
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\openout}
+%
+% Files cannot be opened out during the building of the format.
+% Instead, \cs{openout} is delayed until the end of the dump.
+%
+% \begin{macrocode}
+\let\MYLATEX@openout \openout
+\def\openout#1 {\g@addto@macro\MYLATEX@opens{\immediate\openout#1 }}
+\def\MYLATEX@opens {\let\MYLATEX@opens \@undefined}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\MYLATEX@cleanup}
+%
+% Final clean up done at \cs{endofdump}: reverse the path for \cs{begin}
+% and restores \cs{openout} primitive.
+%
+% \begin{macrocode}
+\def\MYLATEX@cleanup {\let\MYLATEX@cleanup \@undefined
+ \def\MYLATEX@StopAtdocument ##1\MYLATEX@StopAtdocument ##2##3\@nil{%
+ \gdef\begin ####1{##1##3}%
+ }\expandafter\MYLATEX@StopAtdocument \begin{##1}\@nil
+ \let\openout \MYLATEX@openout
+ \let\MYLATEX@openout \@undefined
+ \let\MYLATEX@StopAtdocument \@undefined
+}% \MYLATEX@cleanup
+% \end{macrocode}
+% \end{macro}
+%
+%
+% \begin{macro}{\MYLATEX@fontpreloading}
+%
+% Some font can be preloaded: this gives an advantage to the format.
+%
+% A hook for \CTANpackage{cmap} is necessary.
+%
+% \begin{macrocode}
+\def\MYLATEX@fontpreloading{\let\MYLATEX@fontpreloading \@undefined
+ \begingroup \setbox0=\hbox {%
+ $$% math (not bold, some setups don't have \boldmath)
+ \def\x {\bfseries\itshape}{\itshape}\ttfamily\sffamily
+ \normalfont \x
+ \ifdefined\large \large \x \fi
+ \ifdefined\Large \Large \x \fi
+ \ifdefined\LARGE \LARGE \x \fi
+ \ifdefined\Huge \Huge \x \fi
+ \ifdefined\small \small \x \fi
+ \ifdefined\footnotesize \footnotesize \x \fi
+ \ifdefined\tiny \tiny \x \fi}%
+ \@for\x:={lae,lfe,lgr,ot1,ot1tt,ot6,t1,t2a,t2b,t2c,t5}\do{%
+ \ifcsname cmap@set@\x\endcsname \global\expandafter
+ \let\csname cmap@set@\x\endcsname \@undefined \fi
+ \uppercase\expandafter{\expandafter\def\expandafter\x\expandafter{\x}}%
+ \ifcsname cmap@set@\x\endcsname \global\expandafter
+ \let\csname cmap@set@\x\endcsname \@undefined \fi}%
+ \endgroup
+}% \MYLATEX@fontpreloading
+% \end{macrocode}
+% \end{macro}
+%
+%
+% \begin{macro}{\endofdump}
+%
+%
+% \begin{macrocode}
+\let\MYLATEX@listfiles \listfiles
+\def\endofdump{\let\endofdump \relax
+ \MYLATEX@cleanup
+ \MYLATEX@fontpreloading
+ \makeatother
+ \everyjob\expandafter{\the\everyjob
+ \let\MYLATEX@temp \listfiles
+ {%
+ \MYLATEX@listfiles
+ \global\let\MYLATEX@listfiles \@undefined
+ \expandafter\MYLATEX@banner \@dofilelist
+ }%
+ \let\listfiles \MYLATEX@temp % to be able to used \listfiles once after the format
+ \let\MYLATEX@temp \@undefined
+ \MYLATEX@scanpreamble}%
+ \dump
+}% \endofdump
+% \end{macrocode}
+% \end{macro}
+%
+%
+%
+% \begin{macro}{\MYLATEX@banner}
+% \begin{macro}{\MYLATEX@start}
+%
+% Set to be expanded at \cs{everyjob}: displays a banner in the log file.
+%
+% \begin{macrocode}
+%% Banner for \everyjob.
+{\@makeother\" % just in case
+\xdef\MYLATEX@banner #1#2#3\typeout #4{%
+ \global\let\noexpand\MYLATEX@banner \noexpand\@undefined
+ \newlinechar`\noexpand\^^J\message{%
+ ==============================================================================^^J%
+ JOB NAME\@spaces\@spaces\space: "\noexpand\jobname"^^J%
+ CUSTOMISED FORMAT: "\jobname"^^J%
+ PRELOADED FILES:^^J}%
+ #3%
+ \message{%
+ ==============================================================================}%
+}% \MYLATEX@banner
+\long\gdef\MYLATEX@start #1#2{\global\let\MYLATEX@start \@undefined
+ \message{%
+ (mylatexformat)Info: start reading document "\jobname"^^J%
+ (mylatexformat)\@spaces\space\on@line.
+ (\ifcase#1 \string\endofdump\else\string\begin{document}\fi)^^J%
+ ==============================================================================}%
+ \endgroup
+ \MYLATEX@opens\relax #2%
+}% \MYLATEX@start
+}% \catcode group
+
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\MYLATEX@scanpreamble}
+%
+% While the preamble is being skipped (inside a group)
+% the EOL is active and defined to grab each line and
+% inspect it looking for :
+% \begin{Verbatim}
+% \endofdump
+% or \csname endofdump\endcsname
+% or \begin{document}
+% \end{Verbatim}
+%
+% \begin{macrocode}
+%% While the preamble is being skipped (inside a group)
+%% the EOL is active and defined to grab each line and
+%% inspect it looking for :
+%% \endofdump
+%% or \csname endofdump\endcsname
+%% or \begin{document}.
+%%
+%% The special catcodes required are not enabled until after the
+%% first TeX command in the file, so as to avoid problems with
+%% the special processing that TeX does on the first line, choosing
+%% the format, or the file name etc.
+{% catcode group
+\catcode`\^^M=13 \catcode`\& =8 %
+\long\gdef\MYLATEX@scanpreamble {%
+ \begingroup \catcode`\^^M=13%
+ \long\def\MYLATEX@endofdump ##1\endofdump##2##3&##4##5##6\MYLATEX {##5}%
+ \long\def\MYLATEX@csendofdump ##1\csname endofdump\endcsname##2##3&##4##5##6\MYLATEX {##5}%
+ \long\def\MYLATEX@document ##1document##2##3&##4##5##6\MYLATEX {##5}%
+ \long\def\MYLATEX@begindocument ##1\begin##2##3\MYLATEX##4{%
+ \MYLATEX@document ##2document&&{\MYLATEX@start1{##4}}{^^M}\MYLATEX}%
+ \long\def^^M##1^^M{%
+ \MYLATEX@endofdump##1\endofdump&&%
+ {\MYLATEX@start 0{##1}}%
+ {\MYLATEX@csendofdump ##1\csname endofdump\endcsname&&%
+ {\MYLATEX@start 0{##1}}%
+ {\MYLATEX@begindocument ##1\begin\relax\MYLATEX{##1}}%
+ \MYLATEX}%
+ \MYLATEX}%
+ ^^M%
+}% \MYLATEX@scanpreamble
+}% catcode group
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macrocode}
+%% Trick lookahead to allow mylatex.ltx and the document filename to be
+%% given on the same command line. (initex &latex mylatex.ltx {abc.tex})
+\expandafter\input\endinput%
+%</package>
+% \end{macrocode}
+%
+% \restoregeometry\pagesetup*{left/offset+=1cm,right/offset+=1.5cm-2mm}
+% \begin{History}
+% \sectionformat\subsection{font+=\smaller,bottom=\smallskipamount,top=\medskipamount}
+%
+% \begin{Version}{2011/02/12 v3.4}\HistLabel{3.4}
+% \item Reorganisation of the code + optimisation.
+% \end{Version}
+%
+% \begin{Version}{2011/01/19 v3.3}\HistLabel{3.3}
+% \item Modification of the code for \cs{begin} in order to keep the patching introduced by
+% \CTANpackage{etoolbox} version \textt{2.1} for the hooks \cs{AtBeginEnvironment}...\cs{AtEndEnvironement}.
+% \end{Version}
+%
+% \begin{Version}{2011/01/14 v3.1}\HistLabel{3.1}
+% \item \cs{@for} loop introduced for compatibility with the \xpackage{cmap} package had the bad side effect to define a control sequence \cs{x}. Fixed.
+% \end{Version}
+%
+% \begin{Version}{2011/01/12 v3.0}\HistLabel{3.0}
+% \item Fix a problem with package \CTANpackage{cmap} which could not be
+% included in the format.
+% \item Documentation revisited after Users' feedback (and the \CTANpackage{interfaces} package).
+% \end{Version}
+%
+% \begin{Version}{2010/08/09 v2.9}\HistLabel{2.9}
+% \item Modification of the macros that scan the preamble when the \xext{tex} file is compiled with its format.\\
+% It is now possible to start a file with \cs{begin}\texttt{\{document\}} just after the format specification (\texttt{\&myformat}).
+% \item[To do:] Command line to make the format on Linux (\texttt{-ini} instead of \texttt{-initialize} ???).
+% \end{Version}
+%
+% \begin{Version}{2010/06/30 v2.1}\HistLabel{2.1}
+% \item Added: \cs{listfiles} is now available in the preamble, after \cs{endofdump}, when the document is compiled with its format.
+% \item Documentation update.
+% \end{Version}
+%
+% \begin{Version}{2010/05/20 v1.2}\HistLabel{1.2}
+% \item Fixed a bug in \cs{MYLATEXopens} \\
+% (There was problems when including an index in the format for example...)
+% \end{Version}
+%
+% \begin{Version}{2010/04/30 v1.0}\HistLabel{1.0}
+% \item First version.
+% \end{Version}
+%
+% \end{History}
+%
+% ^^A\restoregeometry\pagesetup*{left/offset+=1cm,right/offset+=1.5cm-2mm}
+% \clearpage
+% \PrintIndex
+%
+% \Finale \ No newline at end of file
diff --git a/macros/latex/contrib/mylatexformat/mylatexformat.pdf b/macros/latex/contrib/mylatexformat/mylatexformat.pdf
new file mode 100644
index 0000000000..76b9f41f61
--- /dev/null
+++ b/macros/latex/contrib/mylatexformat/mylatexformat.pdf
Binary files differ