summaryrefslogtreecommitdiff
path: root/dviware/beebe/src/dvio72.c
diff options
context:
space:
mode:
authorNorbert Preining <norbert@preining.info>2019-09-02 13:46:59 +0900
committerNorbert Preining <norbert@preining.info>2019-09-02 13:46:59 +0900
commite0c6872cf40896c7be36b11dcc744620f10adf1d (patch)
tree60335e10d2f4354b0674ec22d7b53f0f8abee672 /dviware/beebe/src/dvio72.c
Initial commit
Diffstat (limited to 'dviware/beebe/src/dvio72.c')
-rw-r--r--dviware/beebe/src/dvio72.c354
1 files changed, 354 insertions, 0 deletions
diff --git a/dviware/beebe/src/dvio72.c b/dviware/beebe/src/dvio72.c
new file mode 100644
index 0000000000..701c142616
--- /dev/null
+++ b/dviware/beebe/src/dvio72.c
@@ -0,0 +1,354 @@
+/* -*-C-*- dvio72.c */
+/*-->dvio72*/
+/**********************************************************************/
+/******************************* dvio72 *******************************/
+/**********************************************************************/
+
+#include "dvihead.h"
+
+/**********************************************************************/
+/************************ Device Definitions ************************/
+/**********************************************************************/
+
+/* All output-device-specific definitions go here. This section must
+be changed when modifying a dvi driver for use on a new device */
+
+#undef OKIDATA2410
+#define OKIDATA2410 1 /* conditional compilation flag */
+
+#undef HIRES
+#define HIRES 0 /* this is 72 dpi version */
+
+#define VERSION_NO "2.10" /* DVI driver version number */
+
+#if HIRES
+#define DEVICE_ID "OKIDATA Pacemark 2410 144 dpi dot matrix printer"
+ /* this string is printed at runtime */
+#define XDPI 144 /* horizontal dots/inch */
+#undef MAXOPEN
+#define MAXOPEN 06 /* limit on number of open PXL files */
+#else
+#define DEVICE_ID "OKIDATA Pacemark 2410 72 dpi dot matrix printer"
+ /* this string is printed at runtime */
+#define XDPI 72 /* horizontal dots/inch */
+#endif
+
+#define OUTFILE_EXT "o72"
+
+#define BYTE_SIZE 7 /* output file byte size */
+
+#undef STDRES
+#define STDRES 0 /* 0 for low-resolution devices */
+
+#define XPSIZE 14 /* horizontal paper size in inches */
+#define XSIZE (((XDPI*XPSIZE+2*HOST_WORD_SIZE-1)/\
+ (2*HOST_WORD_SIZE))*(2*HOST_WORD_SIZE))
+ /* number of horizontal dots; */
+ /* MUST BE multiple of */
+ /* 2*HOST_WORD_SIZE */
+#define XWORDS ((XSIZE + HOST_WORD_SIZE - 1)/HOST_WORD_SIZE)
+ /* number of words in rows */
+ /* of bitmap array */
+
+#define YDPI XDPI /* vertical dots/inch */
+#define YPSIZE 11 /* vertical paper size in inches */
+#define YSIZE (YDPI*YPSIZE) /* number of vertical dots */
+
+/* The printer bit map. */
+
+#define XBIT XWORDS
+#define YBIT YSIZE
+
+#if (IBM_PC_LATTICE | IBM_PC_MICROSOFT | IBM_PC_WIZARD)
+#undef SEGMEM
+#define SEGMEM 1 /* ( ((long)XBIT * (long)YBIT) > 65536L ) */
+#endif
+
+#include "bitmap.h"
+
+
+#include "main.h"
+#include "abortrun.h"
+#include "actfact.h"
+#include "alldone.h"
+#include "chargf.h"
+#include "charpk.h"
+#include "charpxl.h"
+#include "clrbmap.h"
+#include "clrrow.h"
+#include "dbgopen.h"
+
+/*-->devinit*/
+/**********************************************************************/
+/****************************** devinit *******************************/
+/**********************************************************************/
+
+void
+devinit(argc,argv) /* initialize device */
+int argc;
+char *argv[];
+{
+ (void)getbmap();
+}
+
+/*-->devterm*/
+/**********************************************************************/
+/****************************** devterm *******************************/
+/**********************************************************************/
+
+void
+devterm() /* terminate device */
+{
+}
+
+#include "dispchar.h"
+#include "dvifile.h"
+#include "dviinit.h"
+#include "dviterm.h"
+#include "f20open.h"
+#include "fatal.h"
+#include "fillrect.h"
+#include "findpost.h"
+#include "fixpos.h"
+#include "fontfile.h"
+#include "fontsub.h"
+#include "getbmap.h"
+#include "getbytes.h"
+#include "getfntdf.h"
+#include "getpgtab.h"
+#include "inch.h"
+#include "initglob.h"
+#include "loadchar.h"
+
+/*-->makechar*/
+/**********************************************************************/
+/****************************** makechar ******************************/
+/**********************************************************************/
+
+char
+makechar(p,mask)
+UNSIGN32* p[];
+register UNSIGN32 mask;
+{
+ register char c;
+
+
+#if SEGMEM
+#define Q(n) p[n] /* use precomputed pointers */
+#else /* NOT SEGMEM */
+#define Q(n) (p[0] - (n)*XBIT) /* compute pointers on the fly */
+#endif /* SEGMEM */
+
+ c = '\000';
+ if (*Q(0) & mask)
+ c |= '\001';
+ if (*Q(1) & mask)
+ c |= '\002';
+ if (*Q(2) & mask)
+ c |= '\004';
+ if (*Q(3) & mask)
+ c |= '\010';
+ if (*Q(4) & mask)
+ c |= '\020';
+ if (*Q(5) & mask)
+ c |= '\040';
+ if (*Q(6) & mask)
+ c |= '\100';
+ return(c);
+}
+
+#include "movedown.h"
+#include "moveover.h"
+#include "moveto.h"
+#include "nosignex.h"
+#include "openfont.h"
+#include "option.h"
+
+/*-->outline*/
+/**********************************************************************/
+/****************************** outline *******************************/
+/**********************************************************************/
+
+/*
+************************************************************************
+The OKIDATA Pacemark 2410 has a serious design flaw in that it lacks a
+command to reset to power-on state. This is serious, because it uses
+ETX to enter graphics mode, ETX STX to exit graphics mode, and ETX ETX
+to mean ETX as graphics data. This means that a single ETX sent from
+the host may cause it to enter graphics mode, or generate an error if it
+is already in graphics mode. Similarly, an ETX STX will enter graphics
+mode if it is not already in it, instead of exiting graphics mode. We
+therefore turn on graphics mode for each line, then turn it off again.
+That way, there may be some remote hope of resynchronizing if we lose an
+ETX due to line errors along the way.
+
+From an efficiency standout, it is regrettable that it has no run-length
+encoding of graphics data. The output quality and speed are otherwise
+quite reasonable as low-cost dot matrix printers go.
+************************************************************************
+*/
+
+void
+outline(pline)
+char *pline;
+{
+
+/* A few ASCII control character definitions */
+
+#define STX '\002'
+#define ETX '\003'
+#define SO '\016'
+#define ESC '\033'
+
+ register INT16 left;
+ register char *c;
+
+ for ((left = XSIZE, c = pline + XSIZE - 1);
+ (*c == '\000') && (left > 1);
+ (--left,--c)) /* trim white space but leave */
+ ; /* at least 1 character in line */
+
+ OUTC(ESC); /* ESC A - 12 cpi for square */
+ OUTC('A'); /* aspect ratio*/
+
+#if HIRES
+ OUTC(ESC);
+ OUTC('R'); /* ESC R - 144 dpi plot mode */
+#else
+ OUTC(ESC);
+ OUTC('P'); /* ESC P - 72 dpi plot mode */
+#endif
+
+ OUTC(ETX); /* ETX - begin graphics mode */
+
+ for (c = pline; left; --left)
+ {
+ if (*c == ETX)
+ OUTC(ETX); /* ETX's must be doubled */
+ OUTC(*c);
+ ++c;
+ }
+ OUTC(ETX);
+ OUTC(SO); /* ETX SO - graphics carriage return */
+ OUTC(ETX);
+ OUTC(STX); /* ETX STX - end graphics mode */
+}
+
+#include "outrow.h"
+
+/*-->prtbmap*/
+/**********************************************************************/
+/****************************** prtbmap *******************************/
+/**********************************************************************/
+
+void
+prtbmap()
+{
+
+ register char *c; /* pointer into v7[] */
+ UNSIGN32 *p; /* pointer into bitmap[][] */
+ register UNSIGN32 mask; /* mask for single bit selection */
+ INT16 i,j,k,ybottom,ytop;
+ char v7[XSIZE+2]; /* vertical 7-bit raster encodings */
+
+#undef Q
+#if SEGMEM
+ UNSIGN32* q[14]; /* pointers to 14 raster lines */
+#define Q(n) q[n] /* use precomputed pointers */
+#else /* NOT SEGMEM */
+#define Q(n) (p - (n)*XBIT) /* compute pointers on the fly */
+#endif /* SEGMEM */
+
+ (void)clearerr(plotfp);
+
+ ytop = YBIT-1;
+
+ k = -1; /* find bottom non-zero raster */
+ for (j = 0; (j < ytop) && (k < 0); ++j) /* loop over raster lines */
+ {
+
+#if IBM_PC_MICROSOFT
+ for (k = XBIT - 1; ((k >= 0) && (*BITMAP(j,k) == 0)); --k)
+ ; /* trim white space */
+#else
+ p = BITMAP(j,XBIT-1);
+ for (k = XBIT - 1; ((k >= 0) && (*p == 0)); --k)
+ --p; /* trim white space */
+#endif
+
+ }
+ ybottom = MAX(0,7*((j-1+6)/7)); /* need 7n raster lines */
+
+ for (j = ytop; (j >= ybottom) ; j -= 7) /* loop over raster lines */
+ /* in groups of 7 */
+ {
+
+#if SEGMEM
+#else
+ p = BITMAP(j,0); /* the j-th raster line */
+#endif
+
+ c = &v7[0]; /* vertical 7-bit encodings */
+ for (i = 0; i < XBIT; (++p,++i)) /* loop over raster words */
+ {
+ /* PCC-20 compiled (1 << (HOST_WORD_SIZE-1)) to 0, so do it the
+ hard way, arghh... */
+ mask = 1;
+ mask <<= (HOST_WORD_SIZE-1); /* to select leftmost bit */
+
+#if SEGMEM
+ for (k = 0; k < 16; ++k) /* compute pointers to 16 rasters */
+ q[k] = BITMAP(j-k,i);
+#endif
+
+ for (k = 0; k < HOST_WORD_SIZE; (++c,++k))/* loop over word bits */
+ {
+#if SEGMEM
+ *c = makechar(&q[0],mask); /* examine bits in 7 adjacent */
+ /* rows and build 7-bit */
+ /* character value */
+#else
+ *c = makechar(&p,mask); /* examine bits in 7 adjacent */
+ /* rows and build 7-bit */
+ /* character value */
+#endif
+ mask >>= 1; /* move masking bit right 1 position */
+ }
+ }
+ --c; /* last character encoded */
+
+ outline(&v7[0]);
+ }
+ OUTS("\r\r\r\r\r\n"); /* force a carriage return since it
+ does not always correctly return the
+ head to the left margin */
+ OUTC('\f'); /* FF to eject page */
+
+ (void)fflush(plotfp);
+ if (DISKFULL(plotfp))
+ (void)fatal("prtbmap(): Output error -- disk storage probably full");
+}
+
+#include "prtpage.h"
+#include "readfont.h"
+#include "readgf.h"
+#include "readpk.h"
+#include "readpost.h"
+#include "readpxl.h"
+#include "reldfont.h"
+#include "rulepxl.h"
+#include "setchar.h"
+#include "setfntnm.h"
+#include "setrule.h"
+#include "signex.h"
+#include "skgfspec.h"
+#include "skipfont.h"
+#include "skpkspec.h"
+#include "special.h"
+#include "strchr.h"
+#include "strcm2.h"
+#include "strid2.h"
+#include "strrchr.h"
+#include "tctos.h"
+#include "usage.h"
+#include "warning.h"